Release Notes
Release Notes
PrintSmith™ Vision
Version 3.1
October / 2015
2  EFI PrintSmith Vision | Release Notes
Copyright © 1997 - 2015 by Electronics for Imaging, Inc. All Rights Reserved.
EFI PrintSmith Vision | Release Notes
October 2015 PrintSmith Vision 3.1
This publication is protected by copyright, and all rights are reserved. No part of it may be reproduced or transmitted
in any form or by any means for any purpose without express prior written consent from Electronics for Imaging, Inc.
Information in this document is subject to change without notice and does not represent a commitment on the part of
Electronics for Imaging, Inc.
Patents
This product may be covered by one or more of the following U.S. Patents:
4,941,038, 5,109,241, 5,170,182, 5,212,546, 5,260,878, 5,276,490, 5,278,599,
5,424,754, 5,442,429, 5,459,560, 5,467,446, 5,506,946, 5,517,334, 5,537,516,
5,565,960, 5,583,623, 5,596,416, 5,615,314, 5,619,624, 5,625,712, 5,640,228,
5,799,232, 5,818,645, 5,835,788, 5,859,711, 5,867,179, 5,940,186, 5,959,867,
6,002,795, 6,025,922, 6,035,103, 6,041,200, 6,065,041, 6,112,665, 6,116,707,
6,166,821, 6,173,286, 6,185,335, 6,201,614, 6,215,562, 6,219,155, 6,219,659,
6,226,419, 6,238,105, 6,239,895, 6,256,108, 6,269,190, 6,271,937, 6,278,901,
6,299,063, 6,310,697, 6,321,133, 6,327,047, 6,327,050, 6,327,052, 6,330,071,
6,341,017, 6,341,018, 6,341,307, 6,347,256, 6,348,978, 6,356,359, 6,366,918,
6,429,949, 6,449,393, 6,476,927, 6,490,696, 6,501,565, 6,519,053, 6,539,323,
6,549,300, 6,550,991, 6,552,815, 6,559,958, 6,572,293, 6,590,676, 6,606,165,
6,647,149, 6,657,741, 6,662,199, 6,678,068, 6,707,563, 6,741,262, 6,748,471,
6,778,700, 6,781,596, 6,816,276, 6,825,943, 6,832,865, 6,836,342, RE33,973,
D416,550, D417,864, D419,185, D426,206, D439,851, D444,793.
4,716,978,
5,335,040,
5,543,940,
5,666,436,
5,970,174,
6,122,407,
6,222,641,
6,279,009,
6,330,363,
6,369,895,
6,543,871,
6,633,396,
6,753,845,
RE36,947,
4,828,056,
5,343,311,
5,553,200,
5,745,657,
5,982,937,
6,134,018,
6,224,048,
6,289,122,
6,331,899,
6,381,036,
6,546,364,
6,636,326,
6,757,436,
D341,131,
4,917,488,
5,398,107,
5,563,689,
5,760,913,
5,995,724,
6,141,120,
6,225,974,
6,292,270,
6,340,975,
6,400,443,
6,549,294,
6,643,317,
6,757,440,
D406,117,
Trademarks
The APPS logo, AutoCal, Auto-Count, Balance, Best, the Best logo, BESTColor, BioVu, BioWare, ColorPASS,
Colorproof, ColorWise, Command WorkStation, CopyNet, Cretachrom, Cretaprint, the Cretaprint logo, Cretaprinter,
Cretaroller, DockNet, Digital StoreFront, DirectSmile, DocBuilder, DocBuilder Pro, DocStream, DSFdesign Studio,
Dynamic Wedge, EDOX, EFI, the EFI logo, Electronics For Imaging, Entrac, EPCount, EPPhoto, EPRegister,
EPStatus, Estimate, ExpressPay, Fabrivu, Fast-4, Fiery, the Fiery logo, Fiery Driven, the Fiery Driven logo, Fiery
JobFlow, Fiery JobMaster, Fiery Link, Fiery Prints, the Fiery Prints logo, Fiery Spark, FreeForm, Hagen, Inktensity,
Inkware, Jetrion, the Jetrion logo, LapNet, Logic, MiniNet, Monarch, MicroPress, OneFlow, Pace, PhotoXposure,
PressVu, Printcafe, PrinterSite, PrintFlow, PrintMe, the PrintMe logo, PrintSmith, PrintSmith Site, Printstream, Print to
Win, Prograph, PSI, PSI Flexo, Radius, Rastek, the Rastek logo, Remoteproof, RIPChips, RIP-While-Print,
Screenproof, SendMe, Sincrolor, Splash, Spot-On, TrackNet, UltraPress, UltraTex, UltraVu, UV Series 50, VisualCal,
VUTEk, the VUTEk logo, and WebTools are trademarks of Electronics For Imaging, Inc. and/or its wholly owned
subsidiaries in the U.S. and/or certain other countries.
All other terms and product names may be trademarks or registered trademarks of their respective owners, and are
hereby acknowledged.
Version 3.1  3
Contents
About this Document .................................................................................................... 5
Contact Information ...................................................................................................... 5
Important Information – Read This! ............................................................................. 5
UK Customers ....................................................................................................................................... 5
Do You Meet System Requirements? ................................................................................................. 5
Macintosh OS X Installation Folder .................................................................................................... 5
If You Are Upgrading from PrintSmith Classic 8.1 to PrintSmith Vision ........................................ 6
If You Are Updating PrintSmith Vision ............................................................................................... 6
Before you start the update .............................................................................................................. 6
After the update ................................................................................................................................ 6
Known Issue: Dates When Using Mac OS X 10.10 (Yosemite) ........................................................ 7
System Requirements................................................................................................... 8
Overview ................................................................................................................................................ 8
PrintSmith Vision Server Requirements ............................................................................................ 8
Windows 64-bit ................................................................................................................................. 8
Macintosh ......................................................................................................................................... 9
Important Notes About the Server ................................................................................................... 9
PrintSmith Vision Client Requirements ............................................................................................. 9
Browser Requirements ........................................................................................................................ 9
Monitor and Resolution Requirements ............................................................................................ 10
Network Requirements ...................................................................................................................... 10
Internet Requirements ....................................................................................................................... 10
Custom Document and Report Requirements ................................................................................ 10
Receipt Printer Requirements ........................................................................................................... 10
Fiery Integrations................................................................................................................................ 10
Digital StoreFront Integrations.......................................................................................................... 10
Mobile View Requirements ................................................................................................................ 11
Mobile devices ............................................................................................................................... 11
Mobile operating systems .............................................................................................................. 11
Browser requirements for mobile views ......................................................................................... 11
Enhancements ............................................................................................................. 12
SugarCRM Integration ........................................................................................................................ 12
Mobile Views ....................................................................................................................................... 15
Dashboard ...................................................................................................................................... 15
Appearance .................................................................................................................................... 17
Simplified Procedures for Customizing Documents ...................................................................... 19
Ability to customize statements without Report Manager .............................................................. 19
Customizing credit memos for journal entries ................................................................................ 19
Customizing estimates and invoices .............................................................................................. 20
Enhancements to Digital StoreFront Integration ............................................................................ 22
Additional Account and Company-Related Fields .......................................................................... 23
Customer Window .......................................................................................................................... 23
4  EFI PrintSmith Vision | Release Notes
Address tab ............................................................................................................................................ 23
Credit Control tab.................................................................................................................................... 23
Marketing tab .......................................................................................................................................... 23
Contact Information ........................................................................................................................ 24
Company Preferences ................................................................................................................... 24
Requiring a Product for Jobs ............................................................................................................ 25
Windows 10: Important Information ................................................................................................. 25
Existing PrintSmith Vision installations .......................................................................................... 25
New installations of PrintSmith Vision............................................................................................ 26
Corrections .................................................................................................................. 27
General ................................................................................................................................................ 27
Imports ................................................................................................................................................. 27
User Definitions .................................................................................................................................. 27
Charges ............................................................................................................................................... 27
Stocks .................................................................................................................................................. 27
Accounts ............................................................................................................................................. 27
Estimating ........................................................................................................................................... 28
Invoices and Estimates .................................................................................................................. 28
Jobs ................................................................................................................................................ 28
POS ...................................................................................................................................................... 28
Mobile Views ....................................................................................................................................... 29
Accounting .......................................................................................................................................... 29
Campaigns .......................................................................................................................................... 29
Reports ................................................................................................................................................ 29
Account History .............................................................................................................................. 29
Customer List ................................................................................................................................. 29
Account Ranking ............................................................................................................................ 29
Sales .............................................................................................................................................. 29
Work in Progress ............................................................................................................................ 29
Custom ........................................................................................................................................... 30
Administration .................................................................................................................................... 30
Backups ......................................................................................................................................... 30
Table Editor .................................................................................................................................... 30
Security .......................................................................................................................................... 30
Tracker ................................................................................................................................................. 30
Scheduler ............................................................................................................................................ 30
Digital StoreFront Integration............................................................................................................ 30
Version 3.1  5
About this Document
™
This document describes the enhancements and corrections that were made in PrintSmith Vision 3.1.
Contact Information
You can contact PrintSmith Vision Customer Support in any of the following ways.
EFI Customer Care Site
https://customer.efi.com/support
Use the EFI Customer Care site to report issues, as well as to track the status of issues you reported.
Important
You need a user name and password to log into the EFI Customer Care site. Please contact your
Customer Support representative to have an account created for you.
Phone
North America
888.731.2618
480.538.5800
Monday - Friday 7 A.M. - 5 P.M. US Mountain Standard Time
UK
0800 783 2737
Monday - Friday 8 A.M. - 5 P.M. UK Time
EMEA
+49 2102 745 4500
Monday - Friday 9 A.M. - 6 P.M. Central European Time
Fax
480.538.5804 (North America)
E-Mail
printsmith.support@efi.com
Important Information – Read This!
UK Customers
If you are either updating PrintSmith Vision to 3.1 or installing PrintSmith Vision for the first time, contact
PrintSmith Support (as described on page 5) right after you update or install the software. Support will ensure
that the date format and tax descriptions are localized in reports.
Do You Meet System Requirements?
Be sure you meet the system requirements listed on page 8.
Important
Mac OS X 10.8 is no longer a supported operating system for PrintSmith Vision servers.
Macintosh OS X Installation Folder
When you install PrintSmith Vision on a Mac, be sure to install it in the default Applications folder. Custom
folders are not currently supported, and will prevent PrintSmith Vision from running.
6  EFI PrintSmith Vision | Release Notes
If You Are Upgrading from PrintSmith Classic 8.1 to PrintSmith Vision
If you are upgrading from PrintSmith 8.1, make sure you have PrintSmith Classic 8.1.28 installed before you
export your data. For complete details of upgrading, see the PrintSmith Vision Installation and Upgrade Guide.
If You Are Updating PrintSmith Vision
If you already have PrintSmith Vision installed, and are updating it, see the instructions starting on page 35 of the
PrintSmith Vision Installation and Upgrade Guide.
Warning
To update to PrintSmith Vision 3.1, you must be at version 3.0. You cannot update directly from an
earlier version of PrintSmith Vision.
UK customers: please contact PrintSmith Support right after you update PrintSmith Vision.
Before you start the update
•
Back up your PrintSmith Vision system. For details of backing up, see the PrintSmith Vision Setup and
User Guide.
•
Close PrintSmith Vision Monitor, pgAdmin, and any PrintSmith Vision installation folders that are open.
After the update
To ensure you are seeing all the latest changes to the user interface, clear your browser cache. You only need to
do this for any browser that you used to run PrintSmith Vision in the past. For instructions on clearing the
browser cache:
Chrome
https://support.google.com/chrome/answer/95582?hl=en
Firefox
https://support.mozilla.org/en-US/kb/how-clear-firefox-cache
Internet Explorer
http://windows.microsoft.com/en-in/windows7/how-to-delete-your-browsing-history-ininternet-explorer-9
Safari
https://answers.syr.edu/display/software/Clear+Cache+in+Safari+version+7+on+Mac+OSX
Important
Make sure all your users clear their browser cache, too.
Version 3.1  7
Known Issue: Dates When Using Mac OS X 10.10 (Yosemite)
When you access PrintSmith Vision from a Mac running 10.10, dates selected in the Account Info window,
Generate Statements window, and so on, may change to a different date. As a workaround, select the YY (e.g.,
15) format for the Short date in System Preferences (Date & Time > Open Language & Region > Advanced >
Dates).
8  EFI PrintSmith Vision | Release Notes
System Requirements
Overview
The computer where PrintSmith Vision and its database are installed is known as the server. PrintSmith Vision is
®
®
then accessed by users through a browser on Windows or Macintosh computers. These computers are also
known as clients.
This section describes the technical requirements you must meet for the PrintSmith Vision server (see below)
and for the client computers (see page 9).
In addition, to run PrintSmith Vision, you must meet some miscellaneous requirements such as browser version
and monitor size and resolution.
Starting with PrintSmith Vision 3.0, mobile views of parts of the PrintSmith system are available from
smartphones and tablets. Requirements for taking advantage of mobile views are on page 11.
Important Below are the system requirements for running PrintSmith Vision based on what was certified by EFI.
If your environment is not listed below, then it has not been certified, and EFI cannot guarantee or
support the results.
PrintSmith Vision Server Requirements
You can install PrintSmith Vision on a Windows or Macintosh computer as long as it meets the requirements
listed below.
Important
Although you can run PrintSmith Vision on a shared server, EFI strongly recommends a dedicated
server. Not only does performance degrade when several applications run on the server, but
issues resulting from conflicting applications can be very difficult to diagnose. This type of
diagnosis is therefore not supported by EFI.
PrintSmith Vision can run on a virtual machine (VM). While EFI supports PrintSmith Vision running
in a virtual environment, EFI is not responsible for your virtual environment or its setup. EFI will use
commercially reasonable efforts to investigate potential issues with PrintSmith Vision running on a
virtual machine, but as part of that investigation, EFI may require the issue to be reproduced
independently of the virtual machine environment. When issues are confirmed to be unrelated to
the virtual environment, EFI will support PrintSmith Vision in a way that is consistent with the
support provided when PrintSmith Vision is running in a non-virtual environment.
Windows 64-bit
Operating system:
Processor:
Memory:
Hard drive:
**
Windows 7
Windows 8
Windows 10 (Be sure to read “Windows 10: Important Information” on page 25.)
Windows Server 2008 R2 Standard
Windows Server 2012 R2 Standard or Essentials**
Intel Quad Core i7 2.3 GHz
16 GB (more memory will improve performance)
50 GB free space
If you use Internet Explorer 11 on Windows Server 2012, some additional configuration may be
required. See the section on “Windows Server 2012 and Internet Explorer 11” in the PrintSmith Vision
Installation and Upgrade Guide.
Important
As of PrintSmith Vision 3.2, Windows 7 and Windows Server 2008 will no longer be supported.
Version 3.1  9
Macintosh
Operating system:
Processor:
Memory:
Hard drive:
**
OS X 10.9, 10.9 Server, 10.10, or 10.10 Server **
Intel Quad Core i7 2.3 GHz
16 GB (more memory will improve performance)
50 GB free space
If you currently have a pre-3.1 version of PrintSmith Vision installed on a Mac, and want to upgrade
your Mac to OS X 10.10, you must update PrintSmith Vision to 3.1 before you upgrade the operating
system. After you upgrade the operating system, you must download and re-install Java. (When Apple
upgrades the operating system, it removes Java, which is required to uninstall PrintSmith Vision and to
install future versions of PrintSmith Vision.)
Macs 10.9 and higher do not have Java installed, which is required to install PrintSmith Vision.
Download and install Java before starting the PrintSmith Vision Installer.
Important Notes About the Server
•
If PrintSmith Vision is going to be run from other computers (clients), the server computer should have a
static IP address. This IP address is part of the URL users enter to run PrintSmith Vision; if the IP
address keeps changing (because it is not static), the URL will also keep changing.
•
The server computer must be configured not to go to sleep. If the server goes to sleep, users who are
running PrintSmith Vision from other computers will get a “server down” message, and will be unable to
use PrintSmith while the server is in sleep mode. On a Windows computer, turn off sleep mode in the
Power Options settings in the Control Panel; on a Macintosh, turn off sleep mode in the Energy Saver
settings.
PrintSmith Vision Client Requirements
The requirements for running PrintSmith Vision on a client computer (one on which PrintSmith Vision is not
installed) are:
Operating system:
Windows 7
Windows 8
Windows 10
Macintosh OS X 10.8 or higher
Memory:
4 GB minimum (more memory will improve performance)
Browser:
See “Browser Requirements” below.
Monitor:
See “Monitor and Resolution Requirements” on page 10.
Browser Requirements
The following browsers are supported for running PrintSmith Vision on a desktop:
•
Internet Explorer 10 or 11
Note
When using Internet 11 with Windows Server 2012 R2 Standard or Essentials, some additional
configuration may be required. See the section on “Windows Server 2012 and Internet
Explorer 11” in the PrintSmith Vision Installation and Upgrade Guide.
•
Mozilla Firefox 40.x or later
•
Safari 7.x or later
•
Chrome 41 or later
®
®
®
10  EFI PrintSmith Vision | Release Notes
Monitor and Resolution Requirements
PrintSmith Vision is designed to be viewed and used on a large monitor with high resolution:
•
19-inch monitor
•
Minimum resolution of 1280 x 1024
Important
If you are using a laptop, to see estimates and invoices in full, the height (second number)
must be at least 1024 pixels.
Network Requirements
•
100 base T Ethernet
Internet Requirements
In addition to being required to run PrintSmith Vision, Internet connectivity is required as follows:
•
For initial licenses of software
•
For upgrades and upgrade licenses
•
For Payment Plan users during defined periods of plan
•
For interaction with the EFI Support team
Custom Document and Report Requirements
PrintSmith Vision reports and other documents (such as estimates or invoices) are written in i-net Clear Reports.
If you want to customize your estimates or invoices (for example, include your logo) or if you plan to create
custom reports, you must install i-net Designer, which is part of Clear Reports. You will be given the option of
installing i-net Designer during the PrintSmith Vision server installation.
Receipt Printer Requirements
A receipt printer is optional in PrintSmith Vision, but if you want to use one, you must purchase the Star TSP
700ll printer from EFI.
For important information about configuring the receipt printer, see the PrintSmith Vision Configuring Receipt
Printers Guide.
Fiery Integrations
®
If you are using PrintSmith Vision with a Fiery , Fiery JDF version 1.3.0.22 is required.
Digital StoreFront Integrations
®
If you are using PrintSmith Vision with Digital StoreFront , Digital StoreFront 8.4 is required to take advantage of
the two-way integration introduced in PrintSmith Vision 3.0.
Version 3.1  11
Mobile View Requirements
As of PrintSmith Vision 3.0, mobile views of parts of the PrintSmith system are available from smartphones and
tablets. Mobile views are based on HTML5 technology. This section describes devices, operating systems, and
browsers that are fully compatible with HTML5 and can therefore support PrintSmith Vision mobile views.
Mobile devices
The following mobile devices are supported:
•
iPad 4 and 5 generation
•
iPhone 5 and 6
•
Android™ tablets
•
Android smartphones
®
th
th
®
Mobile operating systems
•
iOS 8.3
•
Android 4.1, 5.1
Browser requirements for mobile views
The following browsers are supported:
•
Chrome 21 or higher
•
Safari 5 or higher
Note
Mozilla Firefox is not supported.
12  EFI PrintSmith Vision | Release Notes
Enhancements
PrintSmith Vision 3.1 includes the following new features and enhancements.
SugarCRM Integration
®
PrintSmith Vision is now integrated with SugarCRM Professional.
Sugar Professional is a CRM system that lets you control and track your customer relationships to improve
customer satisfaction as well as to increase your sales. With Sugar you can manage your customers, contacts,
and prospects; understand the markets your customers are in and what they buy; and track your interactions with
customers. You can use the information provided by Sugar to market and sell your products more effectively.
When PrintSmith Vision and Sugar are integrated, information about customers, prospects, and contacts is
synchronized between the two systems. When an addition or change is made in one system, it is reflected in the
other system. For example, if a new customer is entered in Sugar, a customer is created in PrintSmith Vision,
and vice versa.
Notes
Sugar integration is an optional PrintSmith Vision module that requires a license for a particular number
of CRM users.
Sugar is hosted for you by EFI – you access Sugar via a browser.
After you purchase a CRM license, you will contact PrintSmith Support to get your Sugar site set up. Once this is
done, setup involves:
•
Activating your license in PrintSmith.
•
Enabling the Sugar CRM integration in the Integration preferences in PrintSmith Vision.
•
Defining your CRM users (up to your license limit) in the User Definitions window in PrintSmith Vision.
(E-mail must be configured in PrintSmith Vision before you can define CRM users.)
After CRM users are defined in PrintSmith, users receive an e-mail with the URL of their Sugar site, as
well as their Sugar user name and password. They can then log into Sugar and start to use it.
Version 3.1  13
Users can always access Sugar by clicking PrintSmith CRM in the QuickAccess panel in PrintSmith Vision:
Once PrintSmith Vision and Sugar are connected, information about accounts and contacts is synchronized
between the two systems.
For example, here is an account in Sugar:
14  EFI PrintSmith Vision | Release Notes
In PrintSmith, some of the mapped information is on the Address tab and some on the Marketing tab:
Similar mapping is done for contacts.
For information about configuring the integration with Sugar and understanding what account and contact data is
synchronized, see the PrintSmith Vision and SugarCRM Integration Guide.
Version 3.1  15
Mobile Views
Dashboard
A new Dashboard is available in PrintSmith Vision 3.1. The Dashboard opens automatically after you log into the
mobile views (if you have permission to view the Dashboard).
The Dashboard displays some statistics: the number of invoices due today, overdue invoices, pending estimates,
and customer follow-ups you (the logged in user) have. In addition, if you have permission to view them, you can
see monthly and yearly sales to date. This is My view. To see the same information for the entire shop you can
tap Shop view.
Note
A new security permission (Show shop data on mobile dashboard) controls who can see shop
information. Members of the owner and system admin groups automatically have this permission.
Switch between
your data and that
for entire shop
16  EFI PrintSmith Vision | Release Notes
For details, you can tap Invoices Overdue, Invoices Due Today, or Estimates Pending. The Dashboard
Details page opens.
Notes
The Dashboard shows you how many customer follow-ups you have, but you cannot view the details
from a mobile device. For details of follow-ups, use the desktop version of PrintSmith Vision.
The Dashboard Details that are displayed depend on whether My view or Shop view was selected on
the Dashboard page.
When viewing dashboard details, you can:
•
Tap Overdue to see all the invoices that have a due date in the past.
•
Tap Due Today to see the invoices that are due today.
•
Tap Pending Est. to see all active estimates. These are quotes that either were not yet accepted by the
customer or were accepted but were not converted to invoices yet.
In addition, just as in other mobile views, you can:
Tip
•
Use the controls at the top of the page to find particular documents or sort the list.
•
Use the navigation bar to navigate through the list.
•
Tap a document to see invoice details including contact information.
•
Review job information – a summary of the jobs in a document.
For more information about the mobile views and the dashboard, use online Help while in the views on
your mobile device.
Version 3.1  17
Appearance
Changes were made to the appearance and layout of the views.
Tap to see or
change sort order
In some cases the way you perform tasks is slightly different, but the underlying functionality remains the same.
For example, to sort items in a view, you now do the following:
1.
When
is available at the top of a page, tap it to see the current sort order or to change it. The
Refine page opens. The choices you get depend on the view you were in.
2.
You can then tap the current selection under Sort By, select something different, and tap APPLY.
18  EFI PrintSmith Vision | Release Notes
For Work in Progress, the Refine page also has Options and Include settings that you can change:
Tip
For more information about the mobile views, use online Help while in the views on your mobile device.
Version 3.1  19
Simplified Procedures for Customizing Documents
Several changes were made to simplify the process of customizing documents, in particular statements, credit
memos for journal entries, and estimates/invoices.
Ability to customize statements without Report Manager
You no longer need to have Report Manager if you want to customize statements with a logo and minor
formatting changes. Instead:
1.
On the Form Layout tab in the Generate Statements window, select the layout options you want to use.
These correspond to an EFI-supplied report, which is identified in the Associated Report field. (For
example, Use pre-printed form and Standard Format correspond to EFI_Statement.rpt.)
2.
Click Download. The report is placed in your Downloads folder.
3.
Open the downloaded report in i-net Designer with File > Open and use File > Save As to save the
report under another name (the name cannot begin with EFI_.)
4.
Add your logo and make any other minor formatting changes (for example, change the font). Then save
the report.
5.
Back on the Form Layout tab in the Generate Statements window, click Override and locate the report
you just customized. The name of this report will now be displayed in the Associated Report field and
your printed statements will reflect your customization.
3
Note
For more information about customizing statements, see “Customizing your statements” in the
PrintSmith Vision Setup and User Guide.
Customizing credit memos for journal entries
The procedure for customizing credit memos was changed slightly to be similar to statements – you no longer
have to find a report in the report repository folder. Instead, if you want to customize the credit memo (which is
based on EFI_JournalEntry.rpt), you do the following:
1.
Open the Journal Entries preferences and click Download. EFI_JournalEntry.rpt is placed in your
Downloads folder.
2.
Open the downloaded report in i-net Designer with File > Open and use File > Save As to save the
report under another name (the name cannot begin with EFI_.)
3.
Add your logo and make any other minor formatting changes (for example, change the font). Then save
the report.
20  EFI PrintSmith Vision | Release Notes
4.
Back in the Journal Entries preferences, click Override and locate the report you just customized. Its
name is displayed in the Associated Report field.
5.
Save the preferences.
Note
For more information about customizing credit memos for journal entries, see “Customizing credit
memos for journal entries” in the PrintSmith Vision Setup and User Guide.
Customizing estimates and invoices
To streamline the process of editing estimate and invoice reports, the Document Preferences window has a new
Upload/Download tab.
To edit a report file, you no longer have to find a report file in the invoice repository folder. Instead, you can
select it in the Report file to download field and then click Download. The file is placed in your Downloads
folder.
After you edit the report with i-net Designer and give it a different name, you then click Upload on the
Upload/Download tab to place the report file in the invoice repository. (The report file you upload cannot begin
with EFI_.)
Version 3.1  21
After you upload a file, it is available as a selection in the Associated Report field on the Page tab of the
Document Preferences window so you can associate the report with a set of document preferences as usual.
Report files you
upload from the
Upload/Download
tab are available
as selections here.
22  EFI PrintSmith Vision | Release Notes
Enhancements to Digital StoreFront Integration
PrintSmith Vision 3.1 includes the following enhancements to the integration with Digital StoreFront:
•
Content files for a Digital StoreFront order are now listed in the Digital Assets window in PrintSmith
Vision where you can preview them. In addition, if the job is submitted to a Fiery, the digital assets
information is sent to the Fiery so the job can be produced.
•
PrintSmith Vision checks every 5 minutes for orders from Digital StoreFront. You can now decrease or
increase this Polling interval in the Integration preferences. The maximum number of minutes you can
set is 10.
Note
For a new polling interval to take effect, you must click Reset and then Save in the Integration
preferences.
Version 3.1  23
Additional Account and Company-Related Fields
Customer Window
New fields are available on several tabs in the Customer window.
Address tab
The Address tab includes a new Main Switchboard Phone field. You can use this for the central phone number
for a customer.
Credit Control tab
The Credit Control tab now includes a Royalty Exempt check box. In a franchise situation, you can select the
Royalty Exempt check box if jobs for the account are not subject to royalty payments. (Ignore this check box if
royalty payments do not apply to you.) The check box is displayed only if you are a member of the owner or
system admin access group.
Note
Individual invoices can be flagged as royalty exempt (or non-exempt) in the Document Totals window.
Note
The National Pricing check box is for future use to indicate whether the customer uses standard
corporate-wide pricing or specialized pricing.
Marketing tab
The Marketing tab has a new Custom Data section.
The Custom Data fields are text fields that can be used for any purpose (up to 255 characters per field). The
labels of the fields shown in the figure above are the default labels, but you can change these to anything you
24  EFI PrintSmith Vision | Release Notes
want by editing the Account Custom Labels table with Table Editor. (You can edit the records in the Account
Custom Labels table, but you cannot delete or add records.)
Contact Information
When editing contacts, new social media and home phone fields are available for including more information
about contacts:
Company Preferences
The company preferences include a new section for banking information:
Version 3.1  25
Requiring a Product for Jobs
You can now require users to select a product for all jobs. The Estimator Behavior preferences include a new
Make Product field required for all jobs check box.
When this check box is selected, users cannot save a job until they select a product for it.
Windows 10: Important Information
Windows 10 is now supported for both the PrintSmith Vision server computer and client computers.
Existing PrintSmith Vision installations
During an upgrade to Windows 10, PrintSmith Vision is currently removed so you will lose your PrintSmith
system unless you follow these steps:
1.
Back up your entire PrintSmith Vision system using the Backup Manager preferences as described in
the “Backup Manager preferences” section of the PrintSmith Vision Setup and User Guide.
Important
Store the backup on an external device or in the cloud to make sure your backed-up data
stays safe during the upgrade.
2.
Deactivate your PrintSmith Vision license. For information about deactivating your license, see
“Deactivating a license” in the PrintSmith Vision Installation and Upgrade Guide.
3.
Uninstall PrintSmith Vision.
26  EFI PrintSmith Vision | Release Notes
4.
Upgrade your operating system to Windows 10.
5.
After the operating system is upgraded, install PrintSmith Vision with the UPGRADE (not NEW USER)
option and activate your license. (For installation instructions, see the PrintSmith Vision Installation and
Upgrade Guide.)
6.
Restore your database, custom documents/reports, and digital assets (content files) as described in the
“Restoring the entire PrintSmith Vision system” section of the PrintSmith Vision Setup and User Guide.
New installations of PrintSmith Vision
If you are new to PrintSmith Vision, just install it on your Windows 10 computer as described in the PrintSmith
Vision Installation and Upgrade Guide.
Version 3.1  27
Corrections
The sections that follow describe the corrections that were made in PrintSmith Vision version 3.1. For your
convenience they are categorized.
General
•
Some changes were made to improve overall performance. (Ref. 15531)
Imports
•
The export from PrintSmith Classic was fixed (in version 8.1.28) so that data imported to PrintSmith
Vision is no longer missing costing information. (Ref. 15454)
•
When PrintSmith Classic (8.1.28) ages accounts before exporting data it now ignores the Inactive acct
to prospect and Mark inactive account aging settings. (This prevents customers from being
converted to prospects.) (Ref. 15423)
•
If you used Tracker in PrintSmith Classic, the start date of jobs/charges is now imported into PrintSmith
Vision. (Ref. 15542)
•
For walk-in invoices imported from PrintSmith Classic, the Account Info window now displays the
Account Status and Account Type. (Ref. 15622)
User Definitions
•
The User Name field in the User Definitions window can now include up to 40 characters. (Ref. 15638)
Charges
•
When a charge is based on In Sets and includes a waste chart, the waste is now calculated correctly
when the charge is used in a job. (Ref. 13888)
•
The estimated cost (in the Costing window) is now calculated correctly for job aware charges that use
Number of Sets/Setup. (Ref. 15372)
Stocks
•
The blank stock markup is no longer zeroed out if the parent sheets required are fewer than the
minimum quantity defined for blank sheet pricing in the Stock Definitions window. (Ref. 13962)
•
When you auto-order stock based on the pending list, the preview now correctly reflects the invoice and
job number sequences. (Ref. 12589, 14154)
•
When you auto-order stock based on the pending list, and a stock does not include a color, the color
field in the preview now remains blank instead of being set to the color of the previous stock. (Ref.
15214)
•
When you auto-order stock and select both the Pending List Items and Search for low stock
inventory items check boxes, the pending list items are now processed first. (Ref. 14155)
•
When you order stock manually (Admin > Order Stock) for an invoice, the cost of the stock is now
calculated correctly. (Ref. 14080, 15528)
•
When you order stock for an invoice, and the stock has a minimum order amount, the order quantity is
now calculated correctly. (Ref. 15678)
Accounts
•
If you change the Account Status and Type for the walk-in account, those settings are now retained
when you create an invoice for the walk-in account. (Ref. 15626)
28  EFI PrintSmith Vision | Release Notes
•
The number in the Annual Revenue field on the Marketing tab in the Customer window is now
correctly retained. (It is no longer fractionalized.) (Ref. 15624)
•
In the Account Picker window, you can now double-click anywhere on a line to select the account. (Ref.
13187)
Estimating
Invoices and Estimates
•
You can now filter the Pending Documents window for walk-in accounts by setting Customer# to 1.
(Ref. 15230)
•
When a contact assigned to an invoice is deleted from the system, all the contact information is now
retained in the Account Info window for the invoice, but as a temporary contact. Previously, only the
name was retained. (Ref. 15425, 15468)
•
When a contact has Use Contact Address selected, and the contact is selected for an invoice, the
contact's address is now used instead of the account address in the Invoice Address field in the
Account Info window. (Ref. 15461)
•
In some situations the message about an estimate or invoice being successfully saved was remaining
on the screen. This no longer happens. (Ref. 13665)
•
When a multi-part job with multi-quantities includes an outside service subjob, the prices in the printed
estimate are now correct. The outside service job is no longer added on top of the correct multi-quantity
prices. (Ref. 14507, 15533)
Jobs
•
If the Ordered quantity is not changed, the Press quantity no longer changes if you tab through the
fields a second time (or click the Ordered field). (Ref. 15654)
•
When selecting a vendor for an outside service job, you can now type more than one character to
match those characters in the vendor name. (Ref. 13386)
•
In some situations, a job description you entered was reverting to the job method being used. This no
longer happens. (Ref. 14138)
•
When you create a large format job, you can now enter a Cutoff greater than 999. (Ref. 15163)
•
When a list-based job includes a job aware charge (e.g., for plates) with Colors selected under Select
values in job to be used in calculating price, the price of the job is now calculated correctly. (Ref.
15212)
•
If you create a multi-part job and click out of the Overs Unit Price field, the screen no longer locks up.
(Ref. 15471)
•
If the number of parent sheets required for a blank stock job is less than the first quantity break for the
blank stock price, the price is now calculated (it is no longer zero). (Ref. 14522)
•
In some cases, the system would hang after you made changes to the Paper Calculator settings. This
was fixed. (Ref. 15532)
•
If you create a QuickEst job in the Cash Register window and apply a discount charge, the total now
reflects the discount. (Ref. 15413)
•
The system now prevents you from picking up the same invoice more than once. (This was resulting in
incorrect information during closeouts.) (Ref. 15562)
•
When you click Post in the Cash Register window, the system now ensures account details are loaded
before posting the transaction. (This was causing data corruption on the register tape and incorrect
account balances.) (Ref. 15572)
POS
Version 3.1  29
Mobile Views
•
Except for very long e-mail addresses, the e-mail address for a contact (in the invoice details) is now
displayed next to the E-mail label instead of on the next line. (Ref. 15232)
Accounting
•
You can now select the walk-in account in the Post Payments window without an error occurring. (Ref.
15436)
•
When you enter a partial payment in the Pay column in the Post Payments window and press the Tab
key, the partial payment is now retained. (Ref. 3869)
•
When a tax table is assigned to an account, this tax table (instead of the default tax table) is now used
for finance charges. (Ref. 15535)
•
Statements with a large amount of data no longer time out when being run from a client computer. (Ref.
14555)
•
The Account Aging report is now generated more quickly for large amounts of data. (Ref. 15500)
•
The Peachtree CSV accounting links file is now exported correctly so data can be imported into
Peachtree. (Ref. 15467)
Campaigns
•
If a contact has campaigns associated with him/her, and you change the default contact for the account,
the campaigns associated with the contact are no longer removed. (Ref. 15497)
Reports
Account History
•
If you select First Open, you now see open (unpaid) items starting with the first open item (instead of
seeing all items). (Ref. 13732)
•
If you specify a prefix or suffix for invoices in the Accounting Order Number Format preferences (or
allow a prefix or suffix to be added to an invoice number), the prefix or suffix is now displayed before or
after invoices numbers in account history. (Ref. 15371)
Customer List
•
The Sort by field no longer includes duplicate selections. (Ref. 14537, 15388)
•
For the walk-in account, the Invoice column in the Customer List report now shows either the last
invoice creation date or the last invoice pickup date (whichever was the latest). (Ref. 15707)
Account Ranking
•
For the walk-in account, the account ranking now correctly reflects invoice totals and merchandise
charges. (Ref. 15706)
Sales
•
When you select multiple periods for a daily or monthly sales summary report, the report now includes
the correct data. (Ref. 13185)
Work in Progress
•
The sort direction (ascending or descending) is now retained in the Work in Progress window. (Ref.
13284)
30  EFI PrintSmith Vision | Release Notes
Custom
•
The EFI_Voided Invoice Report no longer includes invoices that were permanently deleted (cancelled
twice). (Ref. 15563)
•
When a report has enough search rules to require scrolling, the scrolling is now handled correctly. (Ref.
15426)
Administration
Backups
•
In the Backup Manager preferences, you can now specify a shared network folder for backups. This
requires specifying a user name and password (and optionally a domain). For information, see the
section on “Backup Manager preferences” in the PrintSmith Vision Setup and User Guide. (Ref. 15519)
Table Editor
•
The Phone Tags table is now locked so you cannot add or delete entries in the table. (Ref. 15211)
Security
•
If a security access group does not give access to Preferences, but does give access to Document
Preferences, users in the group no longer get an “insufficient access level” error when trying to open the
document preferences. (Ref. 15090)
Tracker
•
Sometimes an error occurred when you stopped a job and selected the next location. This was fixed.
(Ref. 15557)
•
Clock in/out now works correctly. Previously, sometimes after employees clocked out they would find
themselves still clocked in. Now, whenever an employee is selected in the Clock In/Out window, the
system checks for corrupt time card data and repairs it if necessary. (Ref. 15581, 15627)
•
Pay period numbers are now correctly retained. (Ref. 15665)
•
When previewing employee time reports, Print Options are now available so you can select Print
Screen, Shrink to Fit, or Custom (just as for Work in Progress or Customer List reports). (Ref. 12684)
Scheduler
•
When you open the Schedule Board, it now automatically displays the current week not some earlier
week. (Ref. 14844)
•
Sometimes an error occurred when you tried to release all tags an invoices. This was fixed. (Ref.
15399)
Digital StoreFront Integration
•
The Products tab in the Web Administration window now includes a Save button to make it more
obvious how to save products when Digital StoreFront is integrated with PrintSmith Vision. (Ref. 14035)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising