IPC Installation guide
IPC Installation guide
Version 3.0
1. Please read these instructions carefully before using the product and keep it for later
2. Follow all warnings and instructions marked on the product.
3. Place the monitor on the stable stand before setting it up.
4. Before installation, unplug the IPC to avoid any electric shock.
5. Before installation, have a crosshead screwdriver and pliers ready.
Check List
When opening the carton, please make sure that all the items listed below are present:
(2) GTIPC-A3:
1. Power cord ×1
2. Antenna ×1
3. User guide ×1 (e-file in CD and specific driver)
Connector Ports
PS/2 Keyboard Port x 1
VGA Port x 1
DVI Port x 1
HDMI Port x 1
Optical SPDIF Out Port x 1
USB 2.0 Port x 4
eSATA2 Connector x 1
USB 3.0 x 2
RJ-45 LAN Port x 1
HD Audio Jack : Rear Speaker/Central/Bass/Line in/Front Speaker/Microphone
Side View:
(3) GTIPC-A3:
1. ATX Power Switch X 1
3. SMA male connector X 1
System Specifications
GTIPC-A3:Intel CPU CORE i5-2400 3.1GHz
System Chipset:Intel H77
Ethernet:Realtek PCIE RTL8111E
Graphic:Intel HD Graphic 2500/4000
Display Output:Supports VGA with max. resolution up to 2048x1536 @75Hz
Supports HDMI 1.4a Technology with max. resolution up to
1920x1200 @60Hz
Supports DVI with max. resolution up to 1920x1200 @60Hz
Audio:7.1 CH HD Audio with Content Protection(Realtek ALC892 Audio Codec)
Hard Drive
HD 2.5” 500GB
Wireless 802.11N
Installing the IPC module
Using the hangers that are located on the rear of the LED,
insert the IPC into the correct position so that it hooks over the
Slot the IPC downwards so that it locks into place on the hangers.
Use the screws that came with the IPC (M3 x L4mm) to fix the
IPC in place in the LED display.
Now connect the cables.
Firstly, there should be a HDMI cable (this comes with the LED) from the IPC into the
HDMI 1 slot on the LED.
Secondly, there should be a USB Cable (this comes with the LED) from the IPC to the
“USB for Touch” connection on the LED
Thirdly, there should be a power cable (this comes with the IPC) from the integrated
LED power outlet to the IPC.
Lastly, connect the Antenna to the top of the IPC
Power on the LED and IPC
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF