RAIN/STORMWATER - TANK FILL CONTROLLER
w/ 10m Float Switch
FEATURES:
• Automatic ‘Tank Full’ pump inhibitor
TANK FULL
• ‘Tank Full’ indicator light
RAIN WATER
TANK FILL
• Low voltage Float Switch circuitry
• Rated for pumps up to 8Amps
• Weatherproof polycarbonate enclosure
• ‘Quick Plug’ power/pump connections
Spare glanded
penetration provided
for Float Switch cable
TRANSFER PIPE
STORM WATER
STORAGE TANK
COLLECTION PIT
Already
Connected
RAIN/STORM WATER OVERFLOW
Float Switch
Conntections
FIGURE 1
NOTES:
• Mount enclosure utilizing external mounting brackets
• Connect Float Switch (Close on Rise - Normally Open) to
terminals provided in controller (see Figure 1)
• If Float Switch cable requires extending utilize IP68 cable
connector to join cables
• Tighten gland to secure cable
• Plug pump lead into socket provided (8Amp max)
• Plug controller power lead into RCD Protected power point
All high voltage connections must be carried out by a suitably
qualified electrician
">
