UniPOS VIT 01 Wireless Fire Alarm Control Panel Instruction manual


Add to my manuals
2 Pages

advertisement

UniPOS VIT 01 Wireless Fire Alarm Control Panel Instruction manual | Manualzz
rev.1/10.12
VIT01
RS232 to PC communication manual
1. Field “Communication”:
1.1.
Status;
Value - can be “Connecting” or “OK”
1.2.
Port (virtual);
Value – shows on which virtual port communication is performed;
1.3.
Addr.;
Value – shows the address assigned to the panel;
2. Field “Panel”:
2.1.
Mode – Mode of the panel;
Values can be:
1. Setup mode
1
rev.1/10.12
2. Duty mode
3. Fault condition
4. Fire condition
2.2.
Det. - number of detectors registered in the system;
2.3.
Rtr. – number of routers registered in the system;
2.4.
Events – numbers of events in the Archive(event log);
3. Field “Configuration”:
3.1.
Button “Read config.” - when you have already established communication
between panel and PC (Status - OK), you can extract current configuration
from the panel to your PC. Give name of the file with extension “xxxxx.vcf” and
save on your PC;
3.2.
Button “Load config.” - when you have already established communication
between panel and PC (Status - OK), you can choose some configuration file
from your PC and load it into the panel. Just click the button, select desired
configuration with “xxxx.vcf” extension and operation starts. After successful
operation the panel will restart itself;
4. Field “Archive”:
4.1.
Button “Read arch.” - when you have already established communication
between panel and PC (Status - OK), you can read complete Archive from the
panel pushing button “Четене”. Give name of the file with extension “xxxxx.arv”
and save to your PC;
4.2.
Button ”Open arch.” - when you have already established communication
between panel and PC (Status - OK), you can read complete Archive from the
panel pushing button “Четене”. Just select desired archive file with “xxxx.arv”
extension. Archive file is in English.
2

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement