Hitachi Tiered Storage Manager Software 8.1.3-01

Hitachi Tiered Storage Manager Software 8.1.3-01
Hitachi Tiered Storage Manager
8.1.3-01 Release Notes
Contents
Contents .................................................................................................... 1
About this document.................................................................................... 1
Intended audience....................................................................................... 1
Getting help ............................................................................................... 1
About this release ....................................................................................... 2
Product package contents............................................................................. 2
New features and important enhancements .................................................... 2
Resolved problems ...................................................................................... 3
Known problems ......................................................................................... 3
Installation precautions ................................................................................ 7
Usage precautions ....................................................................................... 7
Documentation ......................................................................................... 11
Copyrights and licenses ............................................................................. 11
About this document
This document (RN-00HS279-53, April 2015) provides late-breaking information
about the Hitachi Tiered Storage Manager 8.1.3-01. It includes information that was
not available at the time the technical documentation for this product was published,
as well as a list of known problems and solutions.
Intended audience
This document is intended for customers and Hitachi Data Systems partners who
license and use the Hitachi Device Manager.
Getting help
The Hitachi Data Systems Support Center staff is available 24 hours a day, seven
days a week. To reach us, please visit the support website at
https://portal.hds.com for current telephone numbers and other contact
information. If you purchased this product from an authorized HDS reseller, contact
that reseller for support.
© 2015 Hitachi, Ltd. All rights reserved.
RN-00HS279-53 (April 2015)
1
About this release
This release resolves multiple known problems.
Product package contents
Medium
DVD-ROM
Revision
Software
Hitachi Tiered Storage Manager
8.1.3-01
Do c ume nts
Hitachi Command Suite User Guide
MK-90HC172-19
Hitachi Command Suite
Administrator Guide
MK-90HC175-19
Hitachi Command Suite Messages
MK-90HC178-19
Hitachi Command Suite Installation
and Configuration Guide
MK-90HC173-19
Hitachi Command Suite CLI
Reference Guide
MK-90HC176-19
Hitachi Command Suite Audit Log
Reference Guide
MK-92HC213-05
Hitachi Command Suite Tiered
Storage Manager CLI Reference
Guide
MK-90HC177-16
Release Type
Full Package
New features and important enhancements
For 8.1.3-01
#
1.
New Features and Enhancements
Tiered Storage Manager corresponded to Device Manager
8.1.3-01.
Applied products
Tiered Storage
Manager server
Applied
OS
All (Note)
Tiered Storage
Manager GUI
Tiered Storage
Manager CLI
For 8.1.3-00
#
2.
New Features and Enhancements
Tiered Storage Manager now supports Hitachi Virtual
Storage Platform G200, G400, G600 storage systems.
© 2015 Hitachi, Ltd. All rights reserved.
RN-00HS279-53 (April 2015)
Applied products
Device Manager
Server
Applied
OS
All*
2
Device Manager
GUI
Device Manager
CLI
Note: See the System Requirements document for details.
*: Applies to all supported operating systems in Tiered Storage Manager server.
Resolved problems
From 8.1.3-00 to 8.1.3-01
None
From 8.1.2-00 to 8.1.3-00
None
Known problems

The error KAIC16036-E displayed in [2. Migration Target] of the Migrate Data
wizard
When you click the [Next>] button in the [2. Migration Target] screen, the error
message KAIC16036-E might be displayed even though there are sufficient LDEV
IDs. If there are sufficient LDEV IDs, wait a while without changing anything, and
then click the [Next>] button again. If the same error message KAIC16036-E is
displayed, cancel the Migrate Data wizard, wait a while, and then retry the
operation.

Restriction when a DP pool of a storage pool or a DP volume in a DP pool is
specified as the destination of a data migration:
If any of the following conditions is met by the destination for a data migration,
you will be unable to expand the storage pool from Device Manager:
-
The destination is a DP pool making up a storage pool.
The destination is a DP volume in a DP pool making up a storage pool.
In the resource selection screen for selecting the destination of a data migration,
specify conditions so that a DP pool or DP volume described above is not selected
as a destination, or change the destination in the migration pair screen.

Restriction on specifying "is not" or "<>" in filter conditions
When "is not" or "<>" is specified in a filter condition for one of the following
columns in a window that lists for parity groups, volumes, or Data Placement
Profiles, data that does not meet the filter conditions may be displayed.
Columns related to parity groups:
© 2015 Hitachi, Ltd. All rights reserved.
RN-00HS279-53 (April 2015)
3
-
Parity Group
-
Drive Type
-
Drive Speed (RPM)
Columns related to volumes:
-
Host
-
Target ID
-
Copy Info (S-VOL)
-
Copy Info (P-VOL)
-
Parity Group
-
Volume Attributes
Columns related to Data Placement Profiles:
-
Status

Restriction on executing the GetFreeSpaces command for an SMI-S Enabled
storage system
After changing the name of an SMI-S Enabled storage system from the Device
Manager GUI, if the GetFreeSpaces command of the Tiered Storage Manager CLI
is executed with the SubsystemName property specified for the filtercondition
parameter, filtering is not correctly performed and the results output by the
command are empty.
If you want to execute the GetFreeSpaces command for an SMI-S Enabled
storage system whose storage name was changed from the Device Manager GUI,
change the storage name by using the ModifyStorageArray command of the
Device Manager CLI.

Restriction on a logical group when creating Data Placement Profile
If there are 256 or more volumes in a logical group which is used in Data
Placement Profile, it may take several minutes to display the volume list in Create
Data Placement Profile dialog box and KAIC16902-E may occur depending on the
environment.
When creating Data Placement Profile for the logical group which has 256 or
more volumes, divide the logical group into multiple logical groups to make the
number of volumes contained in each logical group is 255 or less.

Restriction on deletion of the logical group concerning data placement profiles
When deleting a logical group concerning data placement profiles, at first delete
the schedule set to data placement profiles.
If the logical group is deleted before deleting the schedule set to data placement
profiles, the schedule remains. If the date of the schedule comes, the task
concerning the data placement profiles will be executed and fail with KAIC15753E.

Restriction on Manage Data Placement Profiles(Logical Group View) dialog box
© 2015 Hitachi, Ltd. All rights reserved.
RN-00HS279-53 (April 2015)
4
In performance chart of Manage Data Placement Profiles(Logical Group View)
dialog box, the information on profile operation history may be displayed out of
performance chart.
Though, the proper information is displayed within performance chart.
In this case, adjust Time period/interval to accommodate the information on
profile operation history with performance chart.

Restriction on deletion of volumes which are targets of data placement profile
tasks
Do not delete volumes which are targets of data placement profile tasks.
To delete a target volume, be sure to cancel the task first.
If a target volume is deleted without canceling the task, task execution fails with
the KAIC60000-E message. In this case, re-register the task.

Restriction on estimated time for the search inconsistency task (search
inconsistent data placement profile task)
The estimated time of a search inconsistency task is not displayed.

Restriction on storage system links in Mobility tab
When a link concerning the following storage systems is clicked on volume list of
the logical group, KAIC16850-E error dialog box is displayed:
-
USP
-
AMS/WMS/SMS series
If the KAIC16850-E error dialog box is displayed, close the error dialog box.
To refer information on the target storage system above, refer to it in Resource
tab.

Restriction on migrating Mainframe DP volumes
If a Mainframe DP volume is migrated with optional shredding specified, the
volume is not deleted after the shredding. If necessary, delete the volume by
using Element Manager.
The zero page reclaim option has no effect in migrations that have a Mainframe
DP volume specified as a target. The storage system automatically executes a
zero page reclaim.

Restriction on message displayed in the License Registration dialog box of GUI
When a Permanent license key and a Subscription license key are registered, if
the Subscription license key is expired, though a Permanent license key is valid,
"All storage system licenses expired. Register valid license keys or license key
files." of message may be displayed.
In this case, discard this message.

Restriction on message to demand refreshing the storage domain
When the message text or action includes "Refresh the storage domain" or
"Refresh Tiered Storage Manager", substitute "Refresh the storage system".
© 2015 Hitachi, Ltd. All rights reserved.
RN-00HS279-53 (April 2015)
5
The name of the storage system that corresponds to the storage domain can be
determined in the following methods:
When using the GUI:
In the <storage-domain-name> subwindow, on the [Detailed information] tab,
refer to the first value of [Domain Ctrl.]
In [Domain Ctrl.], the storage system is displayed in the format <storagesystem-name>:<model-name>:<serial-number>.
When using CLI:
Refer to the value of controllerName in the execution result of the command
GetStorageDomains -d.

Restriction on when a tier created from the Device Manager GUI is displayed
on Tiered Storage Manager
When a tier created from the Device Manager GUI meets any of the following
conditions, the tier is not displayed in the storage tiers of Tiered Storage
Manager:
The tier was created by directly specifying 101 or more volumes.
The tier was created by directly specifying 101 or more DP volumes.
The tier was created by selecting either of the following attributes in advanced
search criteria and specifying 101 or more values for the attribute:

-
[ID/Number/Name] is specified for the category, and the [Parity group on
a controller that hosts can access] is specified for the attribute.
-
[ID/Number/Name] is specified for the category, and the [Parity group on
a controller that contains drives] is specified for the attribute.
Restriction on editing a storage tier created by CLI in Edit Tier dialog box
If a storage tier including the capacity conditions created by CLI is selected and
Edit Tier dialog box is launched, GUI malfunctions.
In this case, use CLI ModifyStorageTier command to edit the storage tier. And
then close the GUI browser and re-login.

Restriction on Migration
When you search for USP V volumes by using P-VOL’s Migration Group or P-VOL’s
MU Number as filter conditions, UNKNOWN might be shown as the volume type of
Mainframe ShadowImage LDEVs in the search result. See the USP V manual
Hitachi Storage Navigator User’s Guide for details.

About Mozilla 1.7.13 (HP-UX 11iv3) support:
In this release, Device Manager GUI does not support connecting to a Device
Manager server by using Mozilla 1.7.13 (HP-UX 11iv3 on PA-RISC) with an IPv6
protocol.
© 2015 Hitachi, Ltd. All rights reserved.
RN-00HS279-53 (April 2015)
6
Installation precautions
Refer to the following manual for installation prerequisites:

Hitachi Command Suite Installation and Configuration Guide.
Usage precautions
SSL/TLS connections failing with KATS48000-E in the Tiered Storage
Manager CLI
If an SSL/TLS connection fails with KATS48000-E in the Tiered Storage Manager
CLI, in addition to the stated causes, the following causes are also possible:
-
The protocols used for an SSL/TLS connection do not match between the
Tiered Storage Manager server and Tiered Storage Manager CLI.
The cipher suites used for an SSL/TLS connection do not match between
the Tiered Storage Manager server and Tiered Storage Manager CLI.
If an SSL/TLS connection fails due to one of the causes above, revise the JRE
used by the Device Manager server and Device Manager CLI. If the problem
persists, in the server.properties file, revise the protocol settings
(server.rmi.security.protocols) and cipher suites
(server.rmi.security.enabledCipherSuites) that are used by the Device Manager
SSL/TLS connection.
Migrating copy pair configurations
If migrating copy pair configurations by using nondisruptive migration, the copy
pair configurations of a source storage system should not be changed in between
creating the migration project and completing the migrating copy pair
configurations.
The migrating copy pair configuration should be completed before starting Step 5
(Unvirtualize Source Volumes) for the volumes that are managed by the
configuration definition file to be migrated.
If above procedure is not followed, configuration definition files might be
unmigratable and KAIC08551-E, KAIC08559-E, KAIC08560-E, or KAIC08565-E
are displayed in the "Add/Remove Config Files" dialog box of the "Migrate Config
Files" step.
If the above problem occurred, migrate the copy pair configurations manually by
performing the following procedure:
1. Migrate the configuration definition files manually on the pair management
server.
1-1. Stop the CCI instance that corresponds to the configuration definition file.
1-2. Copy the configuration definition file from the backup folder to the folder
where the configuration definition file managed by Device Manager agent exists.
© 2015 Hitachi, Ltd. All rights reserved.
RN-00HS279-53 (April 2015)
7
1-3. Specify the command device of the target storage system on HORCM_CMD
of the configuration definition file.
1-4. Add HORCM_VCMD to the configuration definition file and specify the serial
number of the virtual storage machine.
2. Refresh the target storage system.
3. Create copy pairs on the target storage system by using the configuration
definition file that migrated in the procedure 1.
See the "Nondisruptive Migration User Guide" and manuals of "Command Control
Interface" for details of the above procedure.
The configuration definition files that were migrated manually will be displayed as
not migrated in the "Config Files" tab and in the "Add/Remove Config Files" dialog
box after migration.
The end of support for the Tiered Storage Manager GUI in Legacy mode
To execute or confirm a task registered from the Tiered Storage Manager GUI in
Legacy mode, use the Tiered Storage Manager CLI.
Notes on upgrade of Hitachi Command Suite from 7.4.1 or earlier (in
Windows)
In an environment where Host Data Collector (for Windows) v7.4.1 or earlier is
installed, the [Fatal Application Error] dialog box might appear during an upgrade
installation of Hitachi Command Suite. If this dialog box appears, click [OK] to
ignore it and to continue the upgrade installation. Even if this dialog box appears,
there will be no problem in further Hitachi Command Suite operations.
Note on shortcuts after installation and removal (in Windows)
After an installation or removal, shortcut folder named "programs" might be
incorrectly created under the Windows Start menu. This symptom is temporary,
and this shortcut folder will no longer appear after you log off and log on to
Windows.
Notes on performance analysis
Performance information for external parity groups cannot be displayed because
the performance of external parity groups cannot be analyzed.
Also, if an external parity group is selected from the Parity Groups tab for DP
pools in the Mobility tab, and then the Analyze Performance button is clicked, an
incorrect message (KAIC26251-E) is displayed.
Notes on monitoring schedule templates
If a monitoring schedule template created in a version earlier than 7.2.0-00 is
executed, stop-monitoring tasks and start-relocation tasks fail.
Also, if an old version monitoring schedule template is registered with a
monitoring start time that is the same as the monitoring end time of another
monitoring, the start-monitoring tasks may fail with KAIC06400-E error.
© 2015 Hitachi, Ltd. All rights reserved.
RN-00HS279-53 (April 2015)
8
If CLI is executed from a client machine that is placed outside firewall, access to
a Tiered Storage Manager server be SSH, etc. to execute CLI of server machine.
Notes on collecting performance information of storage systems by Tuning
Manager
It is possible to collect performance information on the following storage systems
which are not supporting optimization of data placement from the Mobility tab:
-
SMS
-
AMS/WMS
Even if performance data of these storage systems can be collected, optimization
of the data placement cannot be done on Mobility tab.
Notes on starting the migration wizard
When starting the migration wizard, do not start the migration wizard in more
than five screens in the entire system.
The following event might occur if the wizard is started in more than five screens:
Responses to the volumes search might take three minutes or more.
A memory shortage might occur because the amount of used memory (used, for
example, by GUI processes and by the Web browser) increases greatly.
If the above problem occurs, restart the Device Manager server.
Note on when an unexpected error (KAIC16009-E) occurs in the Migrate
Data dialog box
If an unexpected errors occurs, log in again.
Do not perform any operations on the volumes in the list of volumes in the Select
Volumes window. (Use the list only to view the migration-source volumes for
data migration.)
Notes on executing data migration
If the KAIC16902-E message is displayed when a migration plan is executed in
the Migration Plan Display window, check the task status and do the following:
If the executed migration task is not displayed in the task list:
Execute the operation again. If the error occurs repeatedly, try specifying
conditions that decrease the number of volumes satisfying those conditions.
If the KAIC15001-E message is displayed when a Migration Task Details window
of the executed migration task is displayed:
Delete the migration task. Execute the operation again.
If the error occurs repeatedly, try specifying conditions that decrease the
number of volumes satisfying those conditions.
If the Migration Task Details window of the executed migration task is displayed:
© 2015 Hitachi, Ltd. All rights reserved.
RN-00HS279-53 (April 2015)
9
It is not necessary to make the migration plan again.
Note on the error of KAIC05607-E or KAIC06400-E during an operation of
Migrate Data
If the KAIC05607-E or KAIC06400-E error occurs during an operation of Migrate
Data, some of the configuration changes may be applied to the storage system.
Therefore, a content of the Task Status displayed in the Migration pairs table on a
Task Details dialog of Migrate Data may not be corresponding to the configuration
of the storage system.
In this case, refresh the storage system information and check the current
storage system configuration. After that, re-operate the "Migrate Data" by
following the recent Task Status and the configuration of the storage system:
Notes on data migration by using volumes that are applied data placement
profiles
Volumes to which data placement profiles are applied cannot be used as source
volumes or target volumes for data migration.
In addition, do not perform the following operations:
Operation to apply source volumes or target volumes of data migration to a data
placement profile during their data migration.
Data migration of a source volume or a target volume which is being applied to
data placement profile.
Notes on estimated time for data placement profile operations
Estimated time displayed for the following data placement profile operations may
be inaccurate:
Creating a data placement profile
Updating a data placement profile
Applying a data placement profile
Releasing a data placement profile
Repairing inconsistency (Repairing an inconsistent data placement profile)
Note: The more target volumes exist, the more inaccurate estimated time
becomes.
Notes on stopping search inconsistency task (search inconsistent data
placement profile task)
The stopping search inconsistency task operation is stopped immediately
regardless of checking to "Stop the tasks immediately." check box.
Notes on selecting a tier during the creation of a migration plan
Do not select a tier which has more than 1,300 free volumes during the creation
of a migration plan.
© 2015 Hitachi, Ltd. All rights reserved.
RN-00HS279-53 (April 2015)
10
Notes on using Tiered Storage Manager CLI in firewall environment
If CLI is executed on a client machine to access via firewall to Tiered Storage
Manager server to which firewall is enabled, KATS48000-E error occurs.
If CLI is executed on a client machine to access via firewall to a Tiered Storage
Manager server by SSH, etc. to execute CLI of server machine.
Note that if Device Manager server is in Windows OS, this does not occur when
the following conditions are met:
(1) Windows firewall is enabled.
(2) Firewall exception of htsmService.exe is enabled.
Documentation
Available documents
Document name
Document
number
Issue date
Hitachi Command Suite User Guide
MK-90HC172-19
April 2015
Hitachi Command Suite Installation and Configuration Guide
MK-90HC173-19
April 2015
Hitachi Command Suite Administrator Guide
MK-90HC175-19
April 2015
Hitachi Command Suite Messages
MK-90HC178-19
April 2015
Hitachi Command Suite CLI Reference Guide
MK-90HC176-19
April 2015
Hitachi Command Suite Audit Log Reference Guide
MK-92HC213-05
April 2015
Hitachi Command Suite Tiered Storage Manager CLI
Reference Guide
MK-90HC177-16
April 2015
Copyrights and licenses
© 2015 Hitachi, Ltd. All rights reserved.
No part of this publication may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopying and recording, or stored in
a database or retrieval system for any purpose without the express written
permission of Hitachi, Ltd.
Hitachi, Ltd., reserves the right to make changes to this document at any time
without notice and assumes no responsibility for its use. This document contains
the most current information available at the time of publication. When new or
revised information becomes available, this entire document will be updated and
distributed to all registered users.
© 2015 Hitachi, Ltd. All rights reserved.
RN-00HS279-53 (April 2015)
11
Some of the features described in this document might not be currently available.
Refer to the most recent product announcement for information about feature and
product availability, or contact Hitachi, Ltd., at https://portal.hds.com.
Notice: Hitachi, Ltd., products and services can be ordered only under the terms
and conditions of the applicable Hitachi Data Systems Corporation agreements. The
use of Hitachi, Ltd., products is governed by the terms of your agreements with
Hitachi Data Systems Corporation.
Hitachi is a registered trademark of Hitachi, Ltd., in the United States and other
countries. Hitachi Data Systems is a registered trademark and service mark of
Hitachi, Ltd., in the United States and other countries.
Archivas, BlueArc, Essential NAS Platform, HiCommand, Hi-Track, ShadowImage,
Tagmaserve, Tagmasoft, Tagmasolve, Tagmastore, TrueCopy, Universal Star
Network, and Universal Storage Platform are registered trademarks of Hitachi Data
Systems Corporation.
AIX, AS/400, DB2, Domino, DS8000, Enterprise Storage Server, ESCON, FICON,
FlashCopy, IBM, Lotus, OS/390, RS6000, S/390, System z9, System z10, Tivoli,
VM/ESA, z/OS, z9, zSeries, z/VM, z/VSE are registered trademarks and DS6000,
MVS, and z10 are trademarks of International Business Machines Corporation.
All other trademarks, service marks, and company names in this document or
website are properties of their respective owners.
Microsoft product screen shots are reprinted with permission from Microsoft
Corporation.
This document contains the most current information available at the time of
publication. When new and/or revised information becomes available, this entire
document will be updated and distributed to all registered users.
Hitachi Data Systems is a registered trademark and service mark of Hitachi, Ltd.,
and the Hitachi Data Systems design mark is a trademark and service mark of
Hitachi, Ltd. All other brand or product names are or may be trademarks or service
marks of and are used to identify products or services of their respective owners.
Adobe and Flash Player are either registered trademarks or trademarks of Adobe
Systems Incorporated in the United States and/or other countries.
BSAFE is either a registered trademark or a trademark of EMC Corporation in the
United States and/or other countries.
RSA is either a registered trademark or a trademark of EMC Corporation in the
United States and/or other countries.
HP-UX is a product name of Hewlett-Packard Development Company, L.P. in the
U.S. and other countries.
Java and JDK are registered trademarks of Oracle and/or its affiliates.
Linux® is the registered trademark of Linus Torvalds in the U.S. and other
countries.
© 2015 Hitachi, Ltd. All rights reserved.
RN-00HS279-53 (April 2015)
12
Microsoft and Internet Explorer are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries.
Microsoft is either a registered trademark or a trademark of Microsoft Corporation
in the United States and/or other countries.
Microsoft .NET is software for connecting people, information, systems, and devices.
Microsoft, Windows Server are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries.
Mozilla is a trademark of the Mozilla Foundation in the U.S and other countries.
RC2 is a registered trademark or a trademark of EMC Corporation in the United
States and/or other countries.
RC4 is a registered trademark or a trademark of EMC Corporation in the United
States and/or other countries.
VMware and VMware vSphere ESXi are registered trademarks or trademarks of
VMware, Inc. in the United States and/or other jurisdictions.
Hitachi Device Manager includes RSA BSAFE(R) Cryptographic software from EMC
Corporation.
Oracle and Java are registered trademarks of Oracle and/or its affiliates.
All SPARC trademarks are used under license and are trademarks or registered
trademarks of SPARC International, Inc., in the United States and other countries.
Products bearing SPARC trademarks are based upon an architecture developed by
Sun Microsystems, Inc.
Windows is either a registered trademark or a trademark of Microsoft Corporation in
the United States and/or other countries.
Windows Server is either a registered trademark or a trademark of Microsoft
Corporation in the United States and/or other countries.
Windows Vista is either a registered trademark or a trademark of Microsoft
Corporation in the United States and/or other countries.
Windows 7 is either a registered trademark or a trademark of Microsoft Corporation
in the United States and/or other countries.
This product includes software developed by the Apache Software Foundation
(http://www.apache.org/).
This product includes software developed by Ben Laurie for use in the Apache-SSL
HTTP server project. This product includes software developed by Ralf S.
Engelschall <rse@engelschall.com> for use in the mod_ssl project
(http://www.modssl.org/).
This product includes software developed by Greg Stein <gstein@lyra.org> for use
in the mod_dav module for Apache (http://www.webdav.org/mod_dav/).
Portions of this software were developed at the National Center for Supercomputing
Applications (NCSA) at the University of Illinois at Urbana-Champaign.
© 2015 Hitachi, Ltd. All rights reserved.
RN-00HS279-53 (April 2015)
13
This product includes software developed by the University of California, Berkeley
and its contributors.
This software contains code derived from the RSA Data Security Inc. MD5 MessageDigest Algorithm, including various modifications by Spyglass Inc., Carnegie Mellon
University, and Bell Communications Research, Inc (Bellcore).
This product includes altered versions of software originally developed by Henry
Spencer.
EMC and CLARiiON are registered trademarks of EMC Corporation.
SUSE is a registered trademark or a trademark of SUSE LLC in the United States
and other countries.
Kerberos is a name of network authentication protocol created by Massachusetts
Institute of Technology.
This product includes software developed by Daisuke Okajima and Kohsuke
Kawaguchi (http://relaxngcc.sf.net/).
This product includes software developed by the Java Apache Project for use in the
Apache JServ servlet engine project (http://java.apache.org/).
This product includes software developed by Andy Clark.
Other company and product names mentioned in this document may be the
trademarks of their respective owners. Throughout this document Hitachi has
attempted to distinguish trademarks from descriptive terms by writing the name
with the capitalization used by the manufacturer, or by writing the name with initial
capital letters. Hitachi cannot attest to the accuracy of this information. Use of a
trademark in this document should not be regarded as affecting the validity of the
trademark.
© 2015 Hitachi, Ltd. All rights reserved.
RN-00HS279-53 (April 2015)
14
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising