Volvo S60 2005 Owners Manual

Volvo S60 2005 Owners Manual
2005
VOLVO
S60 & S60 R
TP 7505 (English). AT 0446. Printed in Sweden, Elanders Infologistics Väst AB, Mölnlycke 2004
OWNER'S MANUAL S60 & S60 R
TP 7505
WEB EDITION
2005
Introduction
Dear Volvo owner
We hope you will enjoy many years of driving pleasure in your Volvo. The car has been designed for the safety and comfort of you and your
passengers. Volvo is one of the safest cars in the world. Your Volvo has also been designed to satisfy all current safety and environmental requirements.
In order to increase your enjoyment of the car, we recommend that you familiarise yourself with the equipment, instructions and maintenance
information contained in this owner’s manual.
Thank you for choosing Volvo!
N
Owner’s Manual
A good way of getting to know your new car
is to read the owner’s manual, ideally before
your first journey. This will give you the opportunity to familiarise yourself with new
functions, to see how best to handle the car
in different situations, and to make the best
use of all the car’s features. Please pay
attention to the safety instructions contained
in the manual:
WARNING!
"Warning!" texts indicate where there is a
risk of personal injury in the event of the
instructions not being followed.
Important!
"Important!" texts indicate a risk of
damage to the car in the event of the
instructions not being followed.
The equipment described in the owner’s
manual is not present in all models. In
addition to standard equipment, this manual
also describes options (factory fitted
equipment) and certain accessories (extra
equipment).
O
NOTE! Volvo cars are adapted for the varying
requirements of different markets, as well as
for national or local legal requirements and
regulations.
The specifications, design features and illustrations in this owner’s manual are not
binding. We reserve the right to make modifications without prior notice.
©Volvo Car Corporation
Volvo Cars and the environment
Our environmental philosophy
Clean inside and out
Quality, Safety and Environmental care are
the three core values which guide all the activities of Volvo Cars. Volvo cars comply with
strict international environmental standards
and are manufactured in some of the cleanest
and most resource-efficient plants in the
world. Volvo Cars has been awarded multisite global certification under the ISO 14001
environmental standard, ensuring continuous
improvement in the area. All Volvo models are
supplied with an environmental product
declaration - or EPD - which enables the
customer to compare the environmental
performance of different models and engines.
Visit epd.volvocars.se for more information.
Your Volvo is designed to be clean inside and
out, a concept which means that you benefit
in two ways - from a clean cabin and a highly
efficient exhaust treatment system, which
ensures that your car saves fuel and releases
a minimum of harmful substances. Inside, the
air entering the passenger compartment is
filtered to protect you and your passengers
from dust, particles and pollen.
A sophisticated air quality system known as
IAQS1 can be added as an option to ensure
that the air supplied to the passenger
compartment is cleaner than the air outside.
Consisting of an electronic sensor and an
activated carbon filter, the system monitors
1.
Interior Air Quality System
the level of carbon monoxide in the incoming
air and closes the air intakes to prevent the
level in the cabin from becoming too high - for
example in heavy city traffic, tailbacks and
tunnels - while the carbon filter traps nitrogen
oxides, ground-level ozone and hydrocarbons. In addition, to benefit allergy
sufferers, the fabrics used in the interior
comply with the provisions of the international
Öko-Tex2 standard. Outside, a special
catalytic coating known as PremAir®3 is used
to convert harmful ground-level ozone in the
air passing through the radiator into pure
oxygen.
2.
3.
An international ecological standard
for textiles.
PremAir®is a registered trademark of
Engelhard Corporation.
P
Volvo Cars and the environment
A Volvo meets strict international environmental demands and delivers low fuel
consumption to reduce emissions of greenhouse carbon dioxide. In terms of fuel
economy, Volvo cars are highly competitive in
their respective segments.
Volvo workshops and the
environment
Regular maintenance carried out by an
authorised Volvo workshop creates the conditions for low fuel consumption and
contributes to a cleaner environment. Volvo
service technicians are equipped with the
knowhow and tools to ensure that your car
delivers the best possible environmental
performance.
Reducing environmental impact
We believe that our customers share our
concern for the environment. You can
contribute to improving the environment by
using only ecologically approved car care
products, and by ensuring that your car is
serviced and maintained according to the
instructions in the owner’s manual.
The following hints will help you to do your bit
for the environment:
• Always ensure that your tyre pressures are
correct. Poorly inflated tyres increase fuel
consumption.
Q
• Since roof racks and ski
boxes increase air
resistance, leading to
significantly higher fuel
consumption, they
should be removed
immediately after use.
• Remove unnecessary items from the car the greater the load the higher the fuel
consumption.
• Is your car equipped with an engine block
heater? If so, use it for a few hours before
starting from cold to reduce fuel
consumption and exhaust emissions.
• Drive gently! Avoid accelerating and
braking too hard.
• Drive in the highest
possible gear - lower
engine revs reduce fuel
consumption.
• Ease back on the accelerator on downhill
gradients.
• Use engine braking. Take your foot off the
accelerator and change down.
• Avoid idling. Switch off the engine in
traffic queues.
• Always dispose of
environmentally
hazardous waste, such
as batteries and oils, in
an environmentally safe
manner. If uncertain, ask
your authorised Volvo workshop for
advice.
• Service your car regularly.
These hints will help you to reduce your fuel
consumption without increasing your travel
time or lessening the enjoyment of driving.
Apart from being kind to your car, you’ll be
saving money - and the Earth’s resources.
Safety
Instruments and controls
Climate control
Interior
Locks and alarm
Starting and driving
Wheels and tyres
Car care
Maintenance and service
Audio (option)
Telephone (option)
Technical data
11
31
57
69
83
95
129
145
151
177
199
215
R
Overview, left-hand drive car
Left-hand drive
S
20
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
Fog lamps
Headlamps/
Position/Parking
lights
Rear fog lamp
Direction indicators/
Beam selection
Cruise control
Horn
Combined
instrument panel
Telephone/Audio
keypad
Windscreen wipers
Parking brake
(handbrake)
Switch panel
Climate control
Audio system
Electrical socket/
Cigarette lighter
Hazard warning
flashers
Glovebox
Panel vents
Display
Temperature gauge
page 41
page 41
page 41
page 42
21.
22.
23.
24.
page 47
page 32
25.
26.
page 38
page 61/
page 63
page 178
page 38
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
page 45
37.
page 200/
page 184
page 43
page 48
page 77
page 59
page 36
page 32
38.
Odometer/Trip
odometer/Cruise
control
Speedometer
Direction indicators
Tachometer
Outside temperature/Clock/
Gear position
Fuel gauge
Indicator and
warning symbols
Panel vents
Instrument lighting
Headlamp levelling
Lighting panel
Reading lamps
Interior lighting
Control, sunroof
Seatbelt reminder
Rearview mirror
Lock button, for all
doors
Blocking power
windows in the rear
doors
Controls, power
windows
page 32/
page 32/
page 47
page 32
page 42
page 32
page 32/
page 32/
page 32
page 32
page 33
page 59
page 41
page 41
page 41
page 73
page 73
page 54
page 52
page 52
page 86
39.
40.
Controls, power
door mirrors
Active chassis-Four
C (S60 R)
page 52
page 40/
page 106
Control panel in the driver’s door.
page 51
page 50
T
Overview, right-hand drive car
Right-hand drive
U
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
Rear fog lamp
Headlamps/
Position/Parking lights
Fog lamps
Windscreen wipers
Telephone/Audio
keypad
Horn
Combined instrument
panel
Cruise control
Direction indicators,
Beam selection
Parking brake
(handbrake)
Electrical socket/
Cigarette lighter
Climate control
Audio system
Switch panel
Hazard warning
flashers
Glovebox
Panel vents
Indicator and warning
symbols
Fuel gauge
page 41
page 41
page 41
page 42
page 200/
page 184
page 32
page 47
page 43
page 48
page 38
page 61/
page 63
page 178
page 38
page 45
page 77
page 59
page 33
20
Outside temperature/
Clock/Gear position
21.
22.
23.
24.
Tachometer
Direction indicators
Speedometer
Odometer, Trip
odometer, Cruise
control
Temperature gauge
Display
Panel vents
Lighting panel
Headlamp levelling
Instrument lighting
Reading lamps
Interior lighting
Control, sunroof
Seatbelt reminder
Rearview mirror
Lock button, for all
doors
Blocking power
windows in the rear
doors
Controls, power
windows
Controls, power door
mirrors
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
page 32
page 32/
page 32/
page 32
page 32
page 42
page 32
page 32/
page 32/
page 47
page 32
page 36
page 59
page 41
page 41
page 41
page 73
page 73
page 54
page 52
page 52
page 86
40.
Active chassis-Four C
(S60 R)
page 38/
page 106
Control panel in the driver’s door.
page 51
page 50
page 52
V
NM
Safety
Seatbelts
Airbags (SRS)
Activating/deactivating the airbag (SRS)
Side airbags (SIPS)
Inflatable Curtain (IC)
WHIPS
When are the safety systems activated?
Inspecting the airbags and inflatable curtains
Child safety
12
14
17
19
20
21
23
24
25
NN
Safety
Seatbelts
feed the belt in by hand so that it does not
hang lose.
The belt locks and cannot be withdrawn:
• if it is pulled out too quickly.
• during braking and acceleration.
• if the car leans heavily.
It is important that the belt lies against the
body so it can provide maximum protection.
Do not lean the backrest too far back. The
seatbelt is designed to protect in a normal
seating position.
Keep the following in mind:
Tensioning the hip strap. The belt must be
positioned low down.
Always use a seatbelt
Heavy braking can have serious consequences if the seatbelts are not used. Ensure
that all passengers use their seatbelts.
Otherwise, rear seat passengers may be
thrown forward against the backs of the front
seats in a collision.
Putting on a seatbelt:
– Pull the belt out slowly and secure it by
pressing the buckle into the lock. A loud
"click" indicates that the belt has locked.
Releasing the belt:
– Press the red lock button and let the belt
retract. If the belt does not retract fully,
NO
• do not use clips or anything else that can
prevent the belt from fitting properly.
• ensure the belt is not be twisted or caught
on anything.
• the hip strap must be positioned low
down (not over the abdomen).
• tension the hip strap over the lap by
pulling the diagonal shoulder belt as illustrated.
WARNING!
The seatbelts and airbags interact. If a
seatbelt is not used or is used incorrectly,
this may diminish the protection provided
by the airbag in the event of a collision.
WARNING!
Each belt is intended for one person only.
WARNING!
• If the belt has been subjected to a
major load, such as in a collision, the
entire belt must be replaced. This
includes the reel, mountings, bolts and
buckles. Some of the protective characteristics of the belt may have been lost,
even if it appears to be undamaged.
Replace the seatbelt if the belt is worn or
damaged. The new seatbelt must be typeapproved and intended for installation in
the same position as the replaced belt.
• Never modify or repair the seatbelts
yourself. Contact an authorised Volvo
workshop.
Safety
Seatbelts and pregnancy
It is extremely important that the seatbelt is
used correctly during pregnancy. It should be
in contact with the body. The upper part of the
seatbelt should fit between the breasts and
against the side of the abdomen. The hip
section of the seatbelt must be flat and as far
under the abdomen as possible. It must not
slide up towards the abdomen.
Label on seatbelts with seatbelt tensioner
Seatbelt tensioner
All the seatbelts are equipped with belt
tensioners. A mechanism in the belt tensioner
tightens the belt around the body in the event
of a sufficiently violent collision. This provides
more effective restraint for passengers.
An expectant mother who is driving should
move the seat as far back as possible in order
to obtain the greatest possible distance
between the steering wheel and the
abdomen. Set the steering wheel as far
forward as a comfortable driving position
permits.
NP
Safety
Airbags (SRS)
WARNING!
• Never place a child in a child seat or on
a booster cushion in the front seat if the
airbag (SRS) is activated1.
• Never allow a child to stand or sit in
front of the front passenger seat.
• No one shorter than 140 cm should sit
in the front passenger seat if the airbag
(SRS) is activated1.
Failure to follow the advice given above
can endanger the life of the child.
Airbag (SRS) on the driver’s side
The car has an SRS airbag (Supplemental
Restraint System) in the steering wheel to
supplement the protection afforded by the
seatbelt. This airbag is fitted into the centre of
the steering wheel. The steering wheel is
marked SRS AIRBAG.
WARNING!
The seatbelts and airbags interact. If a
seatbelt is not used or is used incorrectly,
this may diminish the protection provided
by the airbag in the event of a collision.
Passenger airbag (SRS)4
The passenger airbag is fitted behind a panel
above the glovebox. This panel is marked
SRS AIRBAG.
WARNING!
To minimise the risk of injury if the airbag
deploys, passengers must sit as upright as
possible with their feet on the floor and
backs against the backrest. Seatbelts
must be secured.
4.
NQ
Not all cars have a passenger airbag
(SRS). This can be unselected when
the car is ordered.
1. For information on activated/deactivated
airbag (SRS) see page 17.
Safety
WARNING!
If the airbag warning lamp remains lit or
lights while driving, the airbag system is
not fully functional. The symbol can
indicate a fault in the seatbelt, SRS, SIPS
or IC system. Contact an authorised Volvo
workshop as soon as possible.
Location of the passenger airbag in left-hand
drive and right-hand drive cars
WARNING!
• Objects and accessories must not be
positioned or glued on or near the SRS
AIRBAG panel (above the glovebox) or in
the area affected by a deployed airbag.
• Never interfere with SRS components
in the steering wheel or the panel above
the glovebox.
Warning lamp in the combined
instrument panel
The airbag system is continually monitored by
the control module and its warning lamp is
located in the combined instrument panel.
This lamp lights when the ignition key is
turned to position I, II or III. The lamp goes
out once the control module has checked that
the airbag system is fault-free. This usually
takes about 7 seconds.
NR
Safety
Airbags (SRS)
WARNING!
Work on the SRS system can cause
malfunction and result in serious personal
injury.
Repairs must only be performed by an
authorised Volvo workshop.
Airbags (SRS)
NOTE! The airbags have a function whereby
their capacities are adapted to the collision
force to which the vehicle is subjected.
SRS system, left-hand drive
SRS system, right-hand drive.
SRS system
NOTE! The sensors react differently
depending on the course of the collision and
whether the seatbelts on the driver and
passenger sides are used. It is therefore
possible that only one (or none) of the airbags
may inflate in a collision. The SRS system
senses the force of the collision on the car
and adapts accordingly so that one or more
airbags is deployed.
The SRS system consists of a gas generator
surrounded by an inflatable airbag. A sufficiently violent collision trips sensors and
ignites the gas generator, inflating the airbag
with hot gas. To cushion the impact, the
airbag deflates when compressed. When this
occurs, smoke escapes into the car. This is
completely normal. The entire process,
including inflation and deflation of the airbag,
occurs within tenths of a second.
NS
Safety
Activating/deactivating the airbag (SRS)
WARNING!
Activated airbag (passenger seat):
• Never place a child in a child seat or on
a booster cushion in the front passenger
seat. This also applies to persons shorter
than 140 cm.
Deactivated airbag (passenger seat):
• Persons taller than 140 cm must never
sit in the passenger seat.
Failure to follow the advice given above
can endanger life.
Indicator showing that the passenger airbag
(SRS) is deactivated.
PACOS (option)
The airbag (SRS) for the front passenger seat
can be deactivated. This is necessary if a
child seat is to be placed there.
Indicator
A text message in the rearview mirror
indicates that the passenger airbag (SRS) is
deactivated.
PACOS (Passenger Airbag Cut-Off Switch)
Activating/deactivating
The switch is located on the passenger end
of the dashboard and is accessible when the
passenger door is open. Check that the
switch is in the required position. Volvo
recommends that that the ignition key is used
to change position. (Other items with a shape
similar to a key can be used.)
WARNING!
If the car is equipped with a front
passenger airbag (SRS), but does not
have PACOS, the airbag will always be
activated.
NT
Safety
Activating/deactivating the airbag (SRS)
Switch position
ON = Airbag (SRS) activated. With the switch
in this position, persons taller than 140 cm
can sit in the front passenger seat, but never
children in a child seat or on a booster
cushion.
OFF = Airbag (SRS) is deactivated. With the
switch in this position, children in a child seat
or on a booster cushion can sit in the front
passenger seat, but never persons taller than
140 cm.
WARNING!
Do not allow anyone to sit in the front
passenger seat if the text message in the
roof panel indicates that the airbag (SRS)
is deactivated and the airbag warning
symbol is displayed in the combined
instrument panel. This indicates that there
has been a severe malfunction. Contact
an authorised Volvo workshop as soon as
possible.
NU
Safety
Side airbags (SIPS)
WARNING!
• Work on the SIPS bag system can
cause malfunction and result in serious
personal injury. Always contact an
authorised Volvo workshop.
• Do not put objects in the area between
the outside of the seat and the door
panel, since this area is required by the
side airbag.
Side airbag locations.
Side airbags – SIPS bag
A large proportion of the collision force is
transferred by the SIPS to the floor, roof,
beams, pillars, and other structural parts of
the body. The side airbags on the driver and
front passenger seats protect the chest area
and are an important part of the SIPS. The
SIPS bag system consists of two main parts:
The side airbags and the sensors. The side
airbags are located in the front seat
backrests.
WARNING!
Side airbags are a supplement to the
SIPS system. Always wear a seatbelt.
WARNING!
Use only Volvo genuine car seat covers, or
seat covers approved by Volvo. Other seat
covers may impede the operation of the
side air bags.
Child seats and side airbags
The side airbag does not diminish the
protection provided by the car to children
seated in a child seat or on a booster cushion.
A child seat or booster cushion can be placed
on the front passenger seat provided that the
car does not have an activated5 passenger
airbag.
5.
For information on activated/deactivated airbag (SRS), see page 17.
NV
Safety
Inflatable Curtain (IC)
Properties
The inflatable curtain is a supplement to the
SIPS system. It is concealed in the headlining
along both sides of the roof and protects both
front and rear seat passengers. The inflatable
curtain is activated by the SIPS collision
sensors if the car is hit from the side. When
deployed, the inflatable curtain inflates. The
inflatable curtain helps to prevent the driver
and passengers from striking their heads on
the inside of the car during a collision.
OM
WARNING!
The inflatable curtain is a supplement to
the seatbelts.
Always use a seatbelt.
WARNING!
• Never hang or fasten anything on the
roof handles. The hook is only intended
for light outer garments (not for hard
objects such as umbrellas).
• Do not screw or fit anything to the
headlining, door pillars or side panels.
This could compromise the intended
protection. Only use Volvo genuine parts
that are approved for placement in these
areas.
Safety
WHIPS
Protection against whiplash
injury - WHIPS
The whiplash protection system (WHIPS)
consists of energy absorbing backrests and
specially designed head restraints for the
front seats. The system is actuated by a rearend collision, where the angle and speed of
the collision, and the nature of the colliding
vehicle all have an influence.
WARNING!
The WHIPS system is a supplement to the
seatbelts. Always wear your seatbelt.
Properties of the seat
When the WHIPS system is deployed, the
front seat backrests fall backward to alter the
position of the driver and front seat
passenger. This diminishes the risk of
whiplash injury.
WHIPS system and child seats/
booster cushions
The WHIPS system does not diminish the
protection provided by the car to children
seated in a child seat or on a booster
cushion.
Correct seating position
For the best possible protection, the driver
and front seat passenger should sit in the
centre of the seat with as little space as
WARNING!
• If a seat has been subjected to extreme
forces, such as due to a rear collision, the
WHIPS system must be checked by an
authorised Volvo workshop.
• Part of the WHIPS system’s protective
capacity may have been lost even if the
seats appear to be undamaged. Contact
an authorised Volvo workshop to have the
system checked even after a minor rearend collision.
possible between the head and the head
restraint.
ON
Safety
WHIPS
WARNING!
Never modify or repair the seat or WHIPS
system yourself. Contact an authorised
Volvo workshop.
You may place:
• a child seat or booster cushion on the
front passenger seat, provided the
passenger airbag is not activated6.
• a rear-facing child seat in the rear seat
that uses the back of the front seat as
support.
Do not obstruct the WHIPS
system
WARNING!
Do not squeeze rigid objects between the
rear seat cushion and the front seat
backrest. Make sure you do not to
obstruct the function of the WHIPS
system.
6.
OO
For information on activated/deactivated airbag (SRS) see page 17.
WARNING!
If a rear seat backrest is folded down, the
corresponding front seat must be moved
forward so that it does not touch the
folded backrest.
Safety
When are the safety systems activated?
Airbags in the steering wheel
and dashboard (SRS)
The airbags deploy:
• if there is a risk that front seat occupants
will be injured by blows against the
dashboard or steering wheel.
The SRS system senses the collision in the
level of braking and the speed reduction
caused by collision. The sensor determines if
the collision is of the character and nature
requiring airbag deployment to protect the
occupants.
The bodywork of the car could be greatly
deformed in a collision without airbag
deployment. This does not indicate a fault in
the airbags. This means that the function was
not needed at that moment and the
occupants were protected by the other safety
systems of the car.
If the airbags have been deployed, we
recommend the following:
– Have the car towed to an authorised Volvo
workshop. Do not drive the car with the
airbags deployed even if the car can be
driven after an accident.
– Let an authorised Volvo workshop replace
components in the SRS, SIPS, seatbelt
and IC systems.
WARNING!
WARNING!
Never drive with deployed airbags! This
may make the car difficult to steer. Other
safety systems may also be damaged.
Intense exposure to the smoke and dust
released when the air bags are deployed
can cause skin and eye irritation. In case of
problems, wash with cold water and
contact a doctor. The speed of the
deployment and the airbag fabric may
cause friction burns on the skin.
The airbag system control module is
located in the centre console. If the centre
console has become soaked with water,
disconnect the battery cables in the cargo
compartment.
Do not attempt to start; the airbags may be
triggered. Have the car towed to an
authorised Volvo workshop.
Side airbags and inflatable
curtains (SIPS airbags and IC)
The side airbags and inflatable curtains are
normally inflated:
• Only in the event of a side impact when
the car is struck by an object with sufficient force.
NOTE! Deployment of the SRS, SIPS, and IC
systems only occurs once in a collision.
OP
Safety
Inspecting the airbags and inflatable curtains
Inspection intervals
1.
2.
3.
4.
5.
6.
The decal on the door pillar(s) shows the
dates (year, month) when you should contact
an authorised Volvo workshop to inspect and,
if necessary, replace the airbags, belt
tensioners and inflatable curtains. If you have
questions concerning the systems, contact
an authorised Volvo workshop.
This decal is located in the rear left door
opening.
OQ
Driver airbag
Front passenger airbag
Side airbag on the driver’s side
Side airbag on the passenger side
Inflatable curtain on the driver’s side
Inflatable curtain on the passenger side
Safety
Child safety
Children should sit comfortably
and safely
The position of a child in the car and the
choice of equipment is dictated by the child’s
height and weight, for more information see
page 26.
Children of all ages and sizes must always sit
correctly secured in the car. Never allow a
child to sit on the knee of a passenger.
Volvo’s own child safety equipment is
designed for your car. Use Volvo genuine
equipment to best ensure that the mounting
points and attachments are correctly
positioned and are sufficiently strong.
NOTE! Regulations regarding the placement
of children in cars vary from country to
country. Check what laws apply.
Airbags (SRS) and child seats are not
compatible!
Child seats and airbags (SRS)
Always place a child in the rear seat if the
passenger airbag (SRS) is activated7. A child
in a child seat on the front passenger seat
may suffer serious injury if the airbag deploys.
WARNING!
Persons shorter than 140 cm (4 ft 7) may
only sit in the front passenger seat if the
passenger airbag is deactivated.
7.
For information on activated/deactivated airbag, see page 17.
OR
Safety
Child safety
Placement of children in the car
Weight/age Front seat
Alternatives:
• Rear-facing child seat, secured with
seatbelt.
L: Type approval no. E5 03160
• Rear-facing child seat, secured with
Isofix mounting.
L: Type approval no. E5 03162
• Rear-facing child seat, secured with
seatbelt and mounting strap.
L: Type approval no. E5 03135
Alternatives:
9–18 kg
(9–36
• Rear-facing child seat, secured with
months)
seatbelt.
L: Type approval no. E5 03161
• Rear-facing child seat, secured with
Isofix mounting.
L: Type approval no. E5 03163
• Rear-facing child seat, secured with
seatbelt and mounting strap.
L: Type approval no. E5 03135
15–36 kg
Booster cushion with or without
(3–12 years) backrest.
L: Type approval no. E5 03139
<10 kg
(0–9
months)
OS
Outer rear seat
Centre rear seat
Alternatives:
• Rear-facing child seat, secured with
seatbelt and support.
L: Type approval no. E5 03160
• Rear-facing child seat, secured with
Isofix mounting and support.
L: Type approval no. E5 03162
• Rear-facing child seat, secured with
seatbelt, support legs and straps.
L: Type approval no. E5 03135
• Alternatives:
• Rear-facing child seat, secured with
seatbelt and support.
L: Type approval no. E5 03161
• Rear-facing child seat, secured with
Isofix mounting and support.
L: Type approval no. E5 03163
• Rear-facing child seat, secured with
seatbelt, support legs and straps.
L: Type approval no. E5 03135
Booster cushion with or without
backrest.
L: Type approval no. E5 03139
• Rear-facing child seat, secured
with seatbelt, support legs and
straps.
L: Type approval no. E5 03135
• Rear-facing child seat, secured
with seatbelt, support legs and
straps.
L: Type approval no. E5 03135
Alternatives:
• Booster cushion with or without
backrest.
L: Type approval no. E5 03139
• Integrated booster cushion.
B: Type approval no. E5 03140
Safety
L: Suitable for certain child seats as listed in
the specified type approval. Child seats can
be vehicle-specific, limited, semi-universal or
universal.
B: Integrated and approved for this age
group.
WARNING!
Never place a child in a child seat or on a
booster cushion in the front seat if the
airbag (SRS) is activated.
No one shorter than 140 cm (4 ft 7)
should sit in the front passenger seat if the
airbag (SRS) is activated.1
Failure to follow the advice given above
can endanger the life of the child.
1. For information on how to activate/
deactivate the airbag (SRS), see page 17.
Isofix mountings and Isofix guide
ISOFIX fixture system for child
seats (option)
Integrated booster cushion
(option)
The outer rear seats have ISOFIX attachment
points for child seats. Contact a Volvo dealer
for further information on child safety
equipment.
Isofix mountings can be located in both outer
rear seats. The Isofix guide can be moved
from one side to the other as needed.
Volvo’s integrated booster cushion is
specially designed to provide optimum safety
for children.
In combination with the normal seatbelts the
booster cushions are approved for children
weighing between 15 and 36 kg.
Check that:
• the seatbelt is in contact with the child’s
body and is not slack or twisted.
• the belt lies correctly over the shoulder.
• the lap belt is low over the pelvis for
optimum protection.
• the belt does not touch the child’s throat
or lie below the shoulder.
OT
Safety
Child safety
Carefully adjust the position of the head
restraint to suit the child.
Folding out the booster cushion:
– fold down the booster cushion.
– pull apart the Velcro.
– raise the upper portion back into place.
OU
Raising the booster cushion:
• fold down the booster cushion
backrest (A).
• fasten the Velcro (B).
• raise the booster cushion into the rear
seat backrest (C).
NOTE! If the backrest and seat portion are
not properly secured to each other before
being folded up, the backrest can catch in the
rear seat opening when the booster cushion
is used again.
Replacing the booster cushion
It is important that the integrated booster
cushion is properly secured. Therefore, leave
replacement and any repair of the cushion to
an authorised Volvo workshop. Do not modify
or adapt the booster cushion yourself in any
way.
Safety
WARNING!
If an integrated booster cushion has been
subjected to a major load, such as in
conjunction with a collision, the entire
booster cushion must be replaced. This
includes the seatbelt, complete with bolts.
Even if the booster cushion appears to be
undamaged, it may not afford the same
level of protection. The booster cushion
must also be replaced if it is heavily worn.
• Never place the child seat in the front seat
if the car is equipped with an activated8
front passenger airbag. If problems arise
when fitting child safety products, contact
the manufacturer for clearer instructions.
Fitting a child seat
Volvo has child safety products that are
designed for and tested by Volvo.
When using other products that are available
on the market, it is important to read the fitting
instructions included with the product.
• Do not attach the straps for the child seat
to the horizontal adjustment bar, springs,
rails or beams under the seat. Sharp
edges can damage the straps.
• Allow the back of the child seat to rest
against the dashboard. This applies to
cars without a passenger airbag, or where
the airbag is deactivated.
8.
For information on activated/deactivated airbag (SRS) see page 17.
OV
Safety
PM
Instruments and controls
Combined instrument panel
Indicator and warning symbols
Switches in the centre console
Lighting panel
Direction indicators
Windscreen wipers/washer
Hazard warning flashers, rear window and door mirror
defrosters, heated front seats
Trip computer
Cruise control (option)
Parking brake, electric socket/cigarette lighter
Steering wheel adjustment
Power windows
Rearview mirror, door mirrors and side windows
Power sunroof (option)
32
33
38
41
42
43
45
46
47
48
49
50
52
54
PN
Instruments and controls
Combined instrument panel
1. Temperature gauge
Displays the temperature of the engine
cooling system. If the temperature is abnormally high and the needle enters the red zone,
a message is shown in the display. Bear in
mind that extra lamps in front of the radiator
grille reduce the cooling capacity at high
outside temperature and high engine loads.
2. Display
Information and warning messages are
shown in the display.
3. Speedometer
Shows the speed of the car.
4. Trip odometer, T1 and T2
The trip odometers are used for measuring
short distances. The right-hand digit displays
tenths of a kilometre. Press the button for more
than 2 seconds to reset. Switch between trip
odometers with one quick press of the button.
PO
5. Cruise control indicator
See page 47.
6. Odometer
The odometer indicates the total distance the
car has travelled.
7. Main beam on/off
8. Warning symbol
If a fault arises, the symbol lights up and a
message is shown on the display.
9. Tachometer
Indicates engine speed in thousands of revolutions per minute (RPM). Do not allow the
needle of the tachometer to enter the red field.
10. Automatic gearbox indicator
The selected gearshift programme is
displayed here. If you have Geartronic
automatic gearbox and drive using the manual
function, the current manual gear is
displayed.
11. Outside temperature gauge
Displays outside temperature. When the
temperature lies between +2 °C to –5 °C, a
snowflake symbol is shown in the display.
This symbol serves as a warning for slippery
road surfaces. When the car is or was
stationary, the outside temperature gauge
may display a higher reading than the actual
temperature.
12. Clock
Turn the button to set the clock.
13. Fuel gauge
When the lamp in the instrument panel lights,
approximately 8 litres of usable fuel remain in
the tank.
14. Indicator and warning symbols
15. Direction indicators – left/right
Instruments and controls
Indicator and warning symbols
Indicator and warning symbols
The message text is cleared using the READ
button, see page 36, or disappears automatically after 2 minutes.
All indicator and warning symbols light up
when the ignition key is turned to position II
before starting. This is to check that the
symbols/lights are working. When the engine
starts, all the symbols should go out except
the handbrake symbol, which extinguishes
when the handbrake is released.
If the engine does not start
within five seconds, all symbols
extinguish except the symbols
for a fault in the car’s emissions
system and for low oil
pressure. Certain symbols may
have no function, depending on the car’s
specifications.
When the message text
"TIME FOR REGULAR SERVICE" is shown,
the symbol lamp and message text are
cleared using the READ button, or disappear
automatically after 2 minutes.
ABS fault
If the ABS symbol lights, the ABS
system is not functioning. The car’s
normal braking system continues to
work, but without the ABS function.
Warning symbols in the centre
of the instrument panel
These symbols are lit with a red or
amber glow depending on the
severity of the fault.
Red symbol:
– Stop the car! Read the message in the
display.
Symbol and message text are visible until the
fault has been rectified.
Yellow symbol:
– Read the message in the display.
Remedy!
– Stop the car in a safe place and switch off
the engine. Restart the engine.
• If the warning symbol goes out, continue
driving. It was an indicator error.
• If the warning symbol remains lit, drive to
an authorised Volvo workshop to have the
ABS system checked.
Fault in brake system
If the BRAKE symbol lights, the
brake fluid level may be too low.
Stop the car in a safe place and
check the brake fluid reservoir level.
• If the reservoir level is below MIN, the car
should not be driven further. Have it
PP
Instruments and controls
Indicator and warning symbols
towed to an authorised Volvo workshop to
have the brake system checked.
If the BRAKE and ABS warning
symbols light at the same time,
there may be a problem in the brake
force distribution.
Stop the car in a safe place and
switch off the engine. Restart the
engine.
• If both symbols go out, it was an indicator
error.
• If the warning symbols remain lit, check
the brake fluid reservoir level.
• If the reservoir level is below MIN, the car
should not be driven further. Have it
towed to an authorised Volvo workshop
to have the brake system checked.
• If the brake fluid level is normal and the
lamps remain lit, carefully drive the car to
the nearest authorised Volvo workshop to
have the brake system checked.
WARNING!
If the BRAKE and ABS warning symbols
light at the same time, there is a risk that the
rear end will have a tendency to slide during
heavy braking.
PQ
Seatbelt reminder
This lamp lights until the driver
buckles up.
Low oil pressure
If the lamp lights while driving,
engine oil pressure is too low. Stop
the engine immediately and check
the oil level. If the lamp lights but the oil level
is normal, stop the car and contact an
authorised Volvo workshop.
Fault in car’s emissions system
Drive to an authorised Volvo
workshop to have the system
checked.
Fault in SRS
If a fault in the SRS system is
detected the warning symbol will
remain lit or light up while driving.
Drive to an authorised Volvo workshop to
have the system checked.
Alternator not charging
If this lamp lights while driving, there
is probably a fault in the electrical
system. Contact an authorised
Volvo workshop.
Engine preheater (diesel)
This lamp indicates engine
preheating. You can start the car
when the lamp switches off. Applies
to diesel cars only.
Parking brake applied
Remember that the lamp only
indicates that the parking brake is
applied, not the tension on the
brake. Check by pulling the lever!
You must always apply the brake hard
enough so that it fastens in a "notch".
Rear fog lamp
This lamp lights when the fog lamp
is on.
Trailer indicator lamp
Flashes when the direction
indicators of the car and trailer are
used. If the lamp does not flash, one
of the direction indicator lamps on
the trailer or car is defective.
Stability systems STC and
DSTC4
The STC/DSTC system contains several
different functions that are described in more
detail on page 106.
4.
Option in certain markets. Standard
on S60 R.
Instruments and controls
The symbol lights and goes out
again after approx. two
seconds
The symbol is lit for a system check
when the car is started.
The symbol flashes
The SC function acts to prevent the
car’s drive wheels from spinning.
The TC function acts to improve the
car’s traction.
The AYC function acts to prevent skidding.
The warning symbol shines
with a steady amber glow
TRACTION CONTROL
TEMPORARILY OFF is shown on
the information display together with the
symbol.
The TC function has been temporarily
suppressed because the brake temperature
is too high.
Automatic reactivation of the function takes
place when the brake temperature has
returned to normal.
The warning symbol shines
with a steady amber glow
ANTI-SKID SERVICE REQUIRED
appears on the information display
together with the symbol. The STC or DSTC
system has been switched off because of a
fault.
– Stop the car in a safe place and turn off
the engine.
– Restart the engine.
If the warning symbol remains lit, drive to an
authorised Volvo workshop to have the
system checked.
Fault in the STC/DSTC systems
A symbol that lights and shines with
a steady light and the message
"ANTI-SKID SERVICE REQUIRED"
displayed without any of the systems being
switched off is an indication of a system fault.
– Stop the car in a safe place and switch off
the engine. Restart the engine.
• If the warning symbol goes out, the fault
was temporary and it is not necessary to
visit a workshop.
• If the warning symbol remains lit, drive to
an authorised Volvo workshop to have the
system checked.
WARNING!
Under normal driving conditions, the STC/
DSTC system improves the car’s road
safety, but this is not an indication to
increase speed. Always follow normal
safety precautions for cornering and
driving on slippery surfaces.
PR
Instruments and controls
Information display
Messages in the display
A message appears in the display whenever a
warning or indicator symbol lights. Once you
have read and understood the message,
press the READ button (A). Read messages
are then erased from the display and stored in
a memory. Messages regarding faults remain
in the memory until the fault has been
remedied.
Press the READ button to return read
messages to the memory.
NOTE! If a warning message interrupts when
you are in the trip computer menu or wish to
use the telephone, you must first
acknowledge the message by pressing the
READ button (A).
Very serious fault messages cannot be
erased from the display. They remain in the
display until the fault is remedied.
Messages stored in the memory can be read
again. Press the READ button (A) to see
stored messages. Scroll through the
messages stored in the memory by pressing
the READ button.
Message
STOP SAFELY
STOP ENGINE
SERVICE URGENT
SEE MANUAL
SERVICE REQUIRED
FIX NEXT SERVICE
TIME FOR REGULAR SERVICE
Specification
OIL LEVEL LOW1 – FILL OIL
Stop and switch off the engine. Serious risk of damage.
Stop and switch off the engine. Serious risk of damage.
Take your car in for service immediately.
Consult your owner’s manual.
Take your car in for service as soon as possible.
Have your car checked at the next service interval.
When this message is shown, the car is due for a service. When the message is displayed is
affected by the distance travelled, number of months since last service and engine running time.
Low engine oil level. Check and remedy as soon as possible. See page 157 for more information.
OIL LEVEL LOW2 – STOP SAFELY3
Low engine oil level. Stop the car safely and check the oil level. See page 157.
PS
Instruments and controls
Message
OIL LEVEL LOW2 – STOP ENGINE3
OIL LEVEL LOW2 – SEE MANUAL3
Specification
Low engine oil level. Stop the car safely, switch off the engine and check the oil level. See
page 157.
Low engine oil level. Stop the car safely, switch off the engine and check the oil level. See
page 157.
1. Displayed together with yellow warning triangle.
2. Displayed together with red warning triangle.
3. Only applies to engine variants with oil level sensor.
PT
Instruments and controls
Switches in the centre console
NOTE! The order of the buttons may vary.
The STC/DTSC system5
This button is used to reduce
or reactivate the functions of
the STC/DSTC system.
Active chassis, FOUR-C (option)
Press the button to shift
between Comfort and Sport
mode. See also page 106.
BLIS (Blind Spot Information
System) – option
Press the button to deactivate
or reactivate the function. See
page 126 for further information.
When the LED in the button is
lit, the STC --/ DSTC system is
activated (assuming there is
no fault).
NOTE! Hold the button
depressed for at least half a
second to reduce the function
of the STC/ DSTC system. The LED in the
button goes out and the text "STC/ DSTC
SPIN CONTROL OFF" is shown in the
display.
5.
PU
Option in certain markets.
Standard on R version.
Deactivate the system if you must use a wheel
with different dimensions.
The STC/ DSTC system is reactivated when
the engine is restarted.
WARNING!
Keep in mind that car’s driving characteristics may change if you deactivate the
STC/DSTC system.
Electrical socket/Cigarette
lighter (option)
The electric socket can be
used for various 12 V
accessories, such as a
mobile telephone or a
cooler. The cigarette lighter
Instruments and controls
is activated by pressing in the button. Once
the lighter has been heated, the button pops
out again. Pull out the lighter to use it. For
reasons of safety, always keep the cover in
place when the socket is not in use.
Maximum current tap 10 A.
Lowering the outer head
restraints in the rear seat
(option)
–Do not lower the head
restraints if there is a
passenger in one of the
outer seats.
–Turn the ignition key to
position I or II.
– Press button 1 to tilt the rear head
restraints forward for a better rear view.
The head restraints are moved back manually.
• The head restraints must be in their
upright positions if the rear backrests are
to be folded down.
Retractable power door
mirrors (option)
This button is used to fold in
the door mirrors if they are
folded out or to fold them
out if they are folded in.
Do as follows if a door mirror has been
accidentally folded in or out:
– Manually fold the door mirror forward as
far as possible.
– Turn the ignition key to position II.
– Fold the door mirror inward and then
outward using the button. The door
mirrors have now returned to their original
fixed positions.
Parking assistance (option)
The system is always
activated when the car is
started. Press the button to
deactivate/reactivate
parking assistance. See also
page 108.
Deactivation of the deadlocks
and detectors
Use this button if you wish to
switch off the deadlock
function (doors cannot be
opened from the inside
when locked). This button
can also be used when
deactivating the alarm system movement and
tilt detectors6 – e.g. when transporting the car
by ferry. The LED lights when the functions
are deactivated.
Auxiliary lamps (accessory)
Use this button if you want
the auxiliary lamps of the car
to light together with the
main beam or to deactivate
this function. The LED in the
button is lit when the
function is active.
Locking the boot lid (certain
countries)
Press this button in order to
lock the boot lid. The boot lid
remains locked even if the
doors are unlocked manually
with the master key, the
master key remote control or
the service key.
6.
Option
PV
Instruments and controls
Switches in the centre console
Active chassis, FOUR-C (S60 R)
Press one of the buttons to select Comfort,
Sport or Advanced mode. For further information, see page 106.
QM
Instruments and controls
Lighting panel
Front and rear position/parking
lamps.
beam. The LED in the button lights while the
fog lamps are on.
Ignition key in position 0: All lighting
off.
NOTE! In some countries, dipped beam may
not be used in combination with front fog
lamps.
Ignition key in position II:
headlamps on (plus front and rear position/
parking lamps, number plate lighting and
instrument lighting).
You must always turn the light switch to this
position to switch on the main beam.
B – Headlamp levelling
A – Headlamps and position/
parking lamps
All lighting off.
Cars with daytime running lights
(certain countries)
Ignition key in position II: Dipped beam on
(plus front and rear position/parking lamps,
number plate lighting and instrument lighting).
Dipped beam lights automatically when the
ignition key is switched to the driving position
and cannot be switched off. Before trips to
certain countries, an authorised Volvo
workshop can help you deactivate the
daytime running lights.
On certain cars, each headlamp is equipped
with an actuator which allows for headlamp
beam length adjustment in order to
compensate for car load. Control up: Normal
beam. Control down: Lowered beam.
E – Rear fog lamp
Ignition key in position II. Press the button.
The rear fog lamps light in combination with
the main/dipped beam. The LED in the button
and the symbol in the combined instrument
panel light at the same time.
Please remember: Regulations for use of
front and rear fog lamps vary from country to
country.
Cars with Bi-Xenon lighting (option) do not
have control B because headlamp levelling is
automatic.
C – Instrument lighting
Control up: brighter illumination.
Control down: dimmer illumination.
D – Fog lamps (option)
Ignition key in position II. Press the button.
The fog lamps light in combination with the
position/parking lamps and main/dipped
QN
Instruments and controls
Direction indicators
3. Switch, main/dipped beam
– Pull the lever towards you past the "flash
position" and release it to change
between main and dipped beam.
3. Home safe lighting
Do as follows when you leave your car when
it is dark out:
1. Resistance point position
When changing lanes or overtaking, move the
lever until you feel a distinct resistance. The
lever returns when released.
2. Normal turns
The direction indicators light when you move
the lever in the direction the wheel moves
during the turn. When the wheel returns after
a turn, the direction indicators switch off
automatically.
3. Main beam "flash"
– Pull the lever lightly towards you (until you
feel a slight resistance). The main beam
remains lit until the lever is released.
QO
– Remove the key from the ignition switch.
– Pull the left lever (direction indicator)
towards you.
– Exit the car.
– Lock the doors.
The dipped-beam lighting, position/parking
lights, number plate lighting and door mirror
lamps (option) will switch on. These lamps
will remain lit for 30, 60 or 90 seconds. Your
authorised Volvo workshop can select a
suitable time setting.
Instruments and controls
Windscreen wipers/washer
The wipers sweep at high speed.
Rain sensor (option)
The rain sensor automatically increases or
decreases the speed of the windscreen
wipers based on how much water it detects
on the windscreen. The sensitivity of the rain
sensor can be adjusted using the ring (1).
Windscreen wipers
The windscreen wipers are off when
the lever is in position 0. If the lever
is moved upwards, the wipers swipe
one stoke at a time for as long as the lever is
held up.
Intermittent wiping
You can adjust and set a suitable
speed for intermittent wiping. Rotate
the ring (see 1 in illustration) upwards to
increase wiper stroke frequency. Rotate the
ring downwards to decrease wiper stroke
frequency.
The wipers sweep at normal speed.
– Turn the ring upward to increase sensitivity or down to decrease sensitivity (there
is an extra swipe when the ring is turned
upward).
On/Off
When activating the rain sensor, the ignition
key must be in at least position I and the
windscreen wiper lever must be in position 0.
To activate the rain sensor:
– press the button (2). An LED illuminates in
the button to indicate the rain sensor is
active.
To turn the rain sensor off, either:
– press the button (2) or
– press the stalk switch downward to
another wiper program. If the stalk switch
is raised, the rain sensor will remain
active; the wipers make an extra sweep
and then return to rain sensor mode when
the stalk is released to position 0.
The rain sensor is automatically deactivated
when the key is removed from the ignition
switch or five minutes after the ignition is
switched off.
Important!
In an automatic car wash:
Turn off the rain sensor by pressing the
button (2) while the ignition key is in at
least position I. Otherwise, the
windscreen wipers may start and be
damaged.
Windscreen washer
Pull the lever towards the steering wheel to
activate the windscreen washer.
Headlamp washer
(option on certain markets)
Use of the windscreen washer automatically
activates the headlamp washer.
High-pressure wash of the headlamps
consumes a great deal of washer fluid. To
save fluid, the headlamps are only washed
every fifth time (within a ten minute period). If
ten minutes have elapsed since the last
windscreen washing, the headlamps receive
a high-pressure wash the next time the
windscreen is washed.
QP
Instruments and controls
Windscreen wipers/washer
Reduced washing
If only approx. one litre of washer fluid remains
in the reservoir, the supply to the headlamps
is cut off in order to prioritise cleaning of the
windscreen.
Windscreen washer and
headlamp washer (S60 R)
Pull the lever toward the steering wheel to
start the windscreen and headlamp washers.
QQ
Instruments and controls
Hazard warning flashers, rear window and door mirror defrosters, heated front seats
Door mirror and rear window
defrosters
Hazard warning flashers
Use the hazard warning flashers (all direction
indicators flash) when the car is stopped
where it could be a traffic hazard or
obstruction. Press the button to activate the
function.
Use the defroster to
remove ice and misting
from the rear window
and door mirrors.
Pressing the switch
starts defrosting the
rear window and door
mirrors simultaneously.
The LED in the switch
illuminates to indicate
this. A built-in timer
automatically deactivates the door mirror
defroster after about 4 minutes and the rear
window defroster after about 12 minutes.
Heated front seats
See page 61 or
page 64 for further
information.
NOTE! Regulations regarding the use of
hazard warning flashers vary from country to
country.
QR
Instruments and controls
Trip computer
Functions
The trip computer displays the following information:
• AVERAGE SPEED
Controls
To access the trip computer information, you
must turn the ring (B) in steps, either forward
or backward. By turning again, you return to
the starting point.
NOTE! If a warning message interrupts while
you are using the trip computer, you must first
acknowledge the message by pressing the
READ button (A) to return to the trip
computer.
• SPEED IN MILES PER HOUR7
• CURRENT FUEL CONSUMPTION
• AVERAGE FUEL CONSUMPTION
• RANGE TO EMPTY FUEL TANK
Average speed
The average speed since the last reset
(RESET). When the ignition is switched off,
the average speed is stored and used as the
basis of the new value when you continue
driving. This can be reset with the RESET
button (C) on the lever.
Speed in miles per hour7
Current speed is displayed in mph.
Current fuel consumption
Continuous information on current fuel
consumption, calculated each second. The
figure in the display is updated every couple
of seconds. When the car is stationary, "----"
is shown on the display.
NOTE! There may be a slight error in the
reading if a fuel-driven heater is used.
7.
QS
Certain countries
Average fuel consumption
The average fuel consumption since the last
reset (RESET). The average fuel consumption
is stored when the ignition is switched off and
remains until reset with the RESET button (C)
on the lever.
NOTE! There may be a slight error in the
reading if a fuel-driven heater is used.
Range to empty fuel tank
Displays the distance that can be driven with
the fuel remaining in the tank, the calculation
is based on the average fuel consumption
over the last 30 km and the remaining fuel
volume. When the range to empty is less than
20 km "----" appears on the display.
NOTE! There may be a slight error in the
reading if a fuel-driven heater is used.
Instruments and controls
Cruise control (option)
Activating
Return to the set speed
The controls for cruise
control are to the left of the
steering wheel.
Press this button to resume the
previously set speed. CRUISE ON
appears on the combined
instrument panel.
Setting the desired speed:
Disengaging
–Press the CRUISE button.
CRUISE is shown on the
combined instrument panel.
– Touch + or — to lock the vehicle speed.
CRUISE ON appears on the combined
instrument panel.
Cruise control cannot be engaged at speeds
below 30 km/h or above 200 km/h.
Press CRUISE to disengage the cruise
control. CRUISE ON goes out on the
combined instrument panel.
Increasing or decreasing speed
Temporary disengagement
– Increase or decrease the speed by
pressing and holding + or –. The speed of
the car when the button is released is set
as the new speed.
– A brief press (less than half a second) on
+ or – changes the speed by one km/h.
NOTE! A temporary increase in speed (less
than one minute) using the accelerator, such
as while overtaking, does not affect the cruise
control setting. When you release the accelerator, the car will return to the programmed
speed.
Press 0 to disengage the cruise control
temporarily. CRUISE will be shown on the
combined instrument panel. The speed set
earlier is stored in the memory.
The cruise control is also temporarily disengaged when:
• the brake pedal or clutch pedal is
depressed
• speed falls below 30 km/h when travelling
uphill
• the gear selector is moved to position N
• wheel spin or wheel lock-up occurs
• a temporary increase in speed lasts
longer than one minute.
QT
Instruments and controls
Parking brake, electric socket/cigarette lighter
Parking brake (handbrake)
The lever is located between the front seats.
The parking brake operates on the rear
wheels. The warning symbol in the combined
instrument panel lights when the brake is
applied. Pull up the lever slightly and press in
the button to release the brake.
Bear in mind that the warning symbol in the
combined instrument panel illuminates even if
the parking brake is only "slightly" applied.
Check that the lever is properly engaged. Pull
the brake hard and make sure it fastens in a
"catch".
QU
Electric socket/cigarette lighter,
rear seat
The electric socket can be used for various
12 V accessories, such a mobile phone or a
cooler box. Maximum current tap 10 A.
The cigarette lighter is activated by pushing in
the button. Once the lighter has been heated,
the button pops out again. Pull out the lighter
to use it.
For reasons of safety, always keep the cover
in place when the socket is not in use.
Instruments and controls
Steering wheel adjustment
The steering wheel can be adjusted both
vertically and front-rear. Press down the
control on the left-hand side of the steering
column. Then adjust the steering wheel to the
position that suits you best. Press the control
back into place to lock the steering wheel. If
this is difficult, press the steering wheel
slightly while pressing the control back.
WARNING!
Adjust the steering wheel before driving,
never while driving. Ensure that the
steering wheel is locked.
QV
Instruments and controls
Power windows
The power windows are operated using the
controls in the door armrests. The ignition key
must be turned to position I or II for the power
windows to work. Once you finish driving and
remove the ignition key, the windows can still
be opened or closed as long as the front
doors remain closed.
NOTE! The function auto up for the
passenger side is only available in certain
markets.
Controls (B) to operate windows in the rear
doors.
WARNING!
Open a window by depressing the front of the
control, and close it by pulling up the front of
the control.
WARNING!
Make sure that children’s or other
passengers’ hands are clear when closing
the windows by remote control.
Power windows in the front
doors
Windows can be opened or closed from the
front seat two ways.
– Press the control (A) gently downward or
pull it gently upward. The power windows
are raised or lowered as long as you hold
the control.
– Press the control (A) all the way down or
pull it all the way up, and then release. The
windows then open or close automatically. Movement is stopped if the window
is blocked in any way.
RM
If there are children in the car:
– Remember to switch off the supply to
the power windows by removing the
ignition key if the driver leaves the car.
– Make sure that children’s and other
passengers’ hands are clear when
closing the windows.
If the rear door windows are operated from
the driver’s door:
– Check that none of the rear seat
passengers are in danger of getting
their hands caught when closing the
windows.
Instruments and controls
Blocking power windows in the
rear doors
Power window in the front
passenger seat
Power windows in the rear
doors.
The rear power windows can be blocked
using the switch on the driver’s door control
panel.
The control for the power window at the front
passenger seat operates that window only.
The rear door windows can be operated with
the controls on the doors and the switch on
the driver’s door. If the LED in the switch for
blocking power windows in the rear doors
(located in the driver’s door control panel) is
lit, the rear door windows can only be
operated from the driver’s door.
The LED in the switch is unlit
The rear door windows can be operated both
with the control on each rear door and with
the controls on the driver’s door.
The LED in the switch is lit
The rear door windows can only be operated
from the driver’s door.
RN
Instruments and controls
Rearview mirror, door mirrors and side windows
WARNING!
Adjust the mirrors before you begin
driving!
Important!
Use the defroster (see page 45) to
remove ice from the mirrors, not an ice
scraper. The scraper could scratch the
mirror glass.
Interior rearview mirror
Door mirrors
A: normal position.
B: dimming position. Use this if the glow from
car headlamps behind irritate causes
irritation.
The controls for adjusting the two door
mirrors are at the front of the driver’s door
armrest.
Certain models have an autodim. Dimming
occurs automatically based on comparative
light relationships. An authorised Volvo
workshop can adjust the sensitivity.
Seatbelt reminder
The seatbelt warning symbol remains lit in the
top edge of the rearview mirror until the driver
buckles up.
Press the L or R button (L = left door mirror,
R = right door mirror). The LED in the button
lights.
Adjust the position with the adjustment
control in the centre. Press the button again.
The LED should no longer be lit.
Door mirrors with memory
function (option)
If the car has door mirrors with memory
function, they work together with the memory
setting of the seat, see page 71.
Memory function in remote control
When you unlock the car with the remote
control and change the setting of the door
mirrors, these new settings are saved in the
remote control. The next time you unlock the
car with the same remote control and open
the driver’s door within two minutes, the
mirrors will assume their stored positions.
Laminated side windows
(option)
The laminated windows in the front and rear
doors improve sound insulation in the
RO
Instruments and controls
passenger compartment and provide better
protection against unauthorised entry.
Water and dirt-repellent coating
on the front windows and/or
door mirrors (option)
The front windows and/or door mirrors are
treated with a coating that ensures that the
view through the windows or in the mirrors is
good even if it is raining. For information on
glass care, see page 147.
Important!
Do not use a metal ice scraper to remove
ice from the windows. The water and dirtrepellent coating could be damaged.
Use the defroster to remove ice from the
mirrors!
Side windows and mirrors
treated with the water and/or
dirt-repellent coating are
marked with a little symbol.
Rearview and door mirrors
In certain weather conditions, the function of
the dirt-repellent coating is improved if the
door mirror defroster is used, see page 45.
Defrost the door mirrors:
• if they are covered with ice or snow
• in heavy rain and dirty road conditions
• if they are misted.
RP
Instruments and controls
Power sunroof (option)
WARNING!
If there are children in the car:
Remember to switch off the supply to the
sunroof (remove the ignition key) if the
driver leaves the car.
P
N
Q
O
R
S
Open positions
Sunroof controls are located in the
headlining. The sunroof can be opened in two
different ways:
• Raise/lower trailing edge – ventilation
position
• Rearwards/forwards – opening position/
comfort position8
The ignition key must be in position I or II.
1. Closing, automatic
2. Closing, manual
3. Opening, manual
4. Opening, automatic
5. Opening, ventilation position
6. Closing, ventilation position
Ventilation position
Open: Press the rear edge of the control (5)
upward.
Close: Pull the rear edge of the control (6)
downward.
Switch from ventilation position to comfort
position: pull the control rearwards to its end
position (4) and release.
8.
RQ
In comfort position, the sunroof is not
completely open in order to reduce
the level of wind noise.
Opening position/comfort position
Automatic operation
Instruments and controls
Move the control over the resistance point
position (3) to the rearmost end position (4)
or over the resistance point position (2) to the
front end position (1) and release. The
sunroof will open to the comfort position or
will close completely.
WARNING!
Pinch protection functions only in the
opening position – not in ventilation
position.
Make sure children’s hands are clear
when closing the sunroof.
In order to open from comfort position to
maximum opening: Pull the control to the rear
once more to the end position (4) and
release.
Manual operation
Open: Pull the control rearward to the point of
resistance (3). The sunroof moves toward the
fully open position as long as the button is
held in this position.
Close: Press the control forwards to the
resistance point (2). The sunroof will move
towards its closing position as long as the
switch is held in this position.
WARNING!
If you have children in the car, make sure
that their hands are clear when closing the
sunroof.
Sunscreen
The sunroof features a manual, sliding interior
sunscreen. The sunscreen slides back
automatically when the sunroof is opened.
Grip the handle and slide the screen forwards
to close the screen.
Pinch protection
The sunroof’s pinch protection function is
activated if the hatch is blocked by an object.
If blocked, the sunroof will stop and automatically open to the previous position.
RR
Instruments and controls
RS
Climate control
General information on climate control
Manual climate control with air conditioning (AC)
Electronic Climate Control (ECC)
Air distribution
Fuel-driven parking heater (option)
58
61
63
66
67
RT
Climate control
General information on climate control
Misting windows
Reduce the problem of windows misting up
on the inside by cleaning the windows. Use a
regular window cleaner.
Particle filter
Make sure the particle filter is replaced
regularly. Consult your Volvo workshop.
Ice and snow
Remove ice and snow from the climate
control air intake (the grille between the
bonnet and the windscreen).
Fault tracing
An authorised Volvo workshop has the instruments and tools required for any fault tracing
or repair of your climate control system.
Entrust checks and repairs only to trained
personnel.
Refrigerant
The air conditioning system contains R134a
refrigerant. This refrigerant contains no
chlorine, which means that it is harmless to
the ozone layer. The system must only be
charged with R134a refrigerant. Have an
authorised Volvo workshop carry out this
work.
RU
Fan function to prevent battery
discharge
When the engine is off (and if the ignition key
is in position I or II), the fan is automatically
switched off. To activate the fan, turn the
control and set the desired speed. After two
minutes, the fan will slow to a lower speed.
This is one way of preventing the battery from
becoming discharged when the engine is off.
Cars with ECC
Actual temperature
The temperature you select corresponds to
the physical experience with reference to air
speed, humidity, exposure to sun, etc. which
affect the interior and exterior of the car.
Sensors
The sun sensor is on the upper portion of the
dashboard. Remember not to cover it. Do not
cover the passenger compartment temperature sensor on the climate control panel.
Side windows and sunroof
To ensure that the air conditioning works
satisfactorily, close all side windows and the
sunroof (if fitted). Also, make sure the air
ducts in the parcel shelf are not blocked.
Acceleration
The air conditioning system switches off
temporarily at full acceleration. You may feel a
temporary rise in temperature.
Condensation
In warm weather, condensation from the air
conditioning system may drip under the car.
This is normal.
Fuel economy
With ECC, the air conditioning system is
controlled automatically and is used just
enough to cool the passenger compartment
and dehumidify the incoming air. This
provides better fuel economy compared to
conventional systems where the air conditioning cools the air to just above freezing
point.
Climate control
Air distribution
Air vents in the dashboard
Incoming air is distributed through several
different vents located throughout the car.
A. Open
B. Closed
C. Lateral airflow
D. Vertical airflow
Aim the outer vents towards the side windows
to remove misting.
RV
Climate control
General information on climate control
Air vents in the door pillars
A. Open
B. Closed
C. Lateral airflow
D. Vertical airflow
– Aim the vents toward the rear side
windows to remove misting.
– Aim the vents inwards in the car for a
comfortable climate in the rear seat.
Bear in mind that small children can be
sensitive to airflow and draughts.
SM
Climate control
Manual climate control with air conditioning (AC)
N
O
U
1. AC – ON/OFF
2. Recirculation
3. Air distribution
4. Rear window and door mirror defroster
5. Heated front seats
6. Heating/Cooling – right-hand side
7. Heating/Cooling – left-hand side
8. Fan
You must turn the fan knob (9) from the 0
position to connect the air conditioning.
Use the air conditioning at low temperatures
(0R15° C) to dehumidify incoming air.
P
T
Q
R
S
AC – ON/OFF
The air conditioning is
connected to the cooling and
dehumidification function with
the ON LED lights. The air
conditioning is disconnected
with the OFF LED lights.
When you select Defroster
, the air
conditioning is always connected as long as
the fan is not set to position 0.
Heating/Cooling – left/righthand side
Turn to set how warm or cold
the incoming air shall be. For
cooler air, the air conditioning must be connected.
Heated front seats
Do as follows for heated
front seat(s):
– Press once: High heat – both LEDs in the
switch light up.
– Press twice: Low heat – one LED in the
switch lights up.
– Press three times: Heating switched off –
no LEDs in the switch light up.
Your Volvo workshop can adjust the temperature.
SN
Climate control
Manual climate control with air conditioning (AC)
Fan
Fan speed can be increased
or decreased by turning the
knob. If the knob is set to 0,
the air conditioning is
disconnected.
Rear window and
door mirror defrosters
Use this button to quickly
remove misting and ice from
the rear window and door
mirrors, see page 45 for
further information about this
function.
Recirculation
Recirculation can be used to
shut out bad air, exhaust,
etc. from the passenger
compartment. The air in the
passenger compartment is
then recirculated, i.e. no air
from outside the car is taken into the car when
this function is activated. Recirculation
(together with the air conditioning system)
cools the passenger compartment more
quickly in a warm climate.
If you allow the air in the car to recirculate,
there is a risk of icing and misting, especially
SO
in winter. The timer function minimises the risk
of ice, misting and bad air.
Activate the function as follows:
– Press
for more than 3 seconds.
The LED flashes for 5 seconds. The air
recirculates in the car for 3-12 minutes
depending on the outside temperature.
– The timer function is activated each time
you press
.
To switch off the timer function:
– Press
again for more than
3 seconds. The LED lights for 5 seconds
to confirm your selection.
Recirculation is always disconnected when
you select
Defroster.
Air distribution
Use the air distribution
control positions (marked
with dots) between the
different symbols to finetune air distribution for
maximum comfort.
Climate control
Electronic Climate Control (ECC)
O
P
Q
R
S
T
U
N
V
NM
NN
NP
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
AC – ON/OFF
Recirculation/Multifilter with sensor
Recirculation
AUTO
Air distribution
Passenger compartment temperature
sensor
Defroster, windscreen and side
windows
Rear window and door mirror defroster
Seat heater
right-hand side
Seat heater – left-hand side
Temperature – right-hand side
Temperature – left-hand side
Fan
NO
AUTO
Temperature
The AUTO function automatically regulates climate
control so that the desire
temperature is attained. The
automatic function controls
heating, air conditioning, fan speed, recirculation, and air distribution. If you select one or
more functions manually, the other functions
continue operating automatically. All manual
settings are switched off when AUTO is
switched on.
The two knobs can be used
to set the temperature for the
passenger and driver’s sides
of the car. Remember that
the car does not heat up or
cool down any more quickly even if you select
a higher or lower temperature than you want
in the passenger compartment.
Fan
Fan speed can be increased
or decreased by turning the
knob. If AUTO is selected,
fan speed is controlled
automatically. The previously
set fan speed is disconnected.
SP
Climate control
Electronic Climate Control (ECC)
NOTE! If the knob for the fan has been turned
so far that the left LED above the knob lights
up with an orange light, the fan and the air
conditioning system are switched off.
Rear window and door mirror
defrosters
Use this button to quickly
remove misting and ice from
the rear window and door
mirrors, see page 45 for
further information about this
function.
Defroster, windscreen and side
windows
Use this button to quickly
remove misting and ice from
the windscreen and side
windows. The air flows to the
windows at high fan speed.
The LED in the defroster button lights when
this function is activated. The air conditioning
system is now controlled so that the air is
maximally dehumidified. The air is not recirculated.
Air distribution
Air to windows
Air to head and body
Air to legs and feet
Press AUTO to return to
automatic air distribution.
AC – ON/OFF
The air conditioning system
is controlled automatically by
the system when the ON
LED is lit. This way, incoming
air is cooled and dehumidified sufficiently. When AC OFF is selected
and the OFF LED lights, the air conditioning
system is disconnected; other functions are
still controlled automatically. The air conditioning system operates down to approximately 0 °C.
Recirculation
Recirculation can be used to
shut out bad air, exhaust,
etc. from the passenger
compartment. The air in the
passenger compartment is
then recirculated, i.e. no air
from outside the car is taken
into the car when this
function is activated.
If you allow the air in the car to recirculate,
there is a risk of icing and misting, especially
in winter.
When you select Defroster
the air
conditioning system is controlled so that air is
maximally dehumidified.
The timer function (cars with Multifilter and air
quality sensor have no timer function)
minimises the risk for ice, misting and bad air.
Heated front seats
Activate the function as follows:
Do as follows for heated
front seat(s):
–Press once: High heat –
both LEDs in the switch light
up.
SQ
– Press twice: Low heat – one LED in the
switch lights up.
– Press three times: Heating switched off –
no LEDs in the switch light up.
Your Volvo workshop can adjust the temperature.
– Press
for more than 3 seconds.
The LED flashes for 5 seconds. The air
recirculates in the car for 3-12 minutes
depending on the outside temperature.
– The timer function is activated each time
you press
.
Climate control
To switch off the timer function:
– Press
again for more than
3 seconds. The LED lights for 5 seconds
to confirm your selection.
Recirculation is always disconnected when
you select
Defroster.
Air quality system (option)
The air quality system
consists of a multifilter and a
sensor. The filter separates
gases and particles, thereby
reducing the volume of
odours and pollutants
entering the passenger compartment. When
the sensor detects contaminated outside air,
the air intake is closed and the air in the
passenger compartment is recirculated.
When the air quality sensor is active, the
green AUT LED lights in
.
Operation
Press
to activate the air quality
sensor (normal setting).
• The AUT LED lights. The air quality sensor
is now activated.
• No LED lights. Recirculation is not
activated unless needed to cool in a warm
climate.
• The LED MAN lights. Recirculation is now
activated.
Keep in mind the following:
• Make it a rule to have the air quality sensor
activated at all times.
• Recirculation is limited in cold weather to
avoid misting.
• If misting occurs, you should deactivate
the air quality sensor.
• If misting occurs, you can use the
defroster functions for the windscreen,
side windows and rear window, see
page 64.
• Follow the Volvo service program for the
recommended replacement interval of the
Multifilter. If the car is used in environments where more contaminants are
present, it may be necessary to change
the Multifilter more often.
Or:
Select one of the following three functions by
pressing
repeatedly.
SR
Climate control
Air distribution
Air distribution
Air distribution
Air distribution
Use
Air through
front and rear
air vents.
Air to
windows.
Air is not
recirculated in this
position. Air conditioning is always
connected. There is
a certain amount of
airflow to the air
vents.
Air to both
floor and
windows.
There is a certain
amount of airflow to
the air vents.
When you want
good cooling in a
warm climate.
When you want
to remove ice and
misting. High fan
speed is good for
this.
Air to floor.
There is a
certain
amount of airflow to
the air vents and the
defroster vents for
the windscreen and
side windows.
SS
When you want
comfortable
conditions and
good demisting
in a cold climate.
Not too low a fan
speed.
When you want
to warm your feet.
Air to floor
and air vents.
Use
In sunny weather
with cool outside
temperatures.
Climate control
Fuel-driven parking heater (option)
below, the maximum running time of the
parking heater is 60 minutes.
If the parking heater does not start despite
repeated attempts, a message is shown on
the display. Contact an authorised Volvo
workshop.
WARNING!
General
The electrical system must be "awakened"
before the parking heater can be
programmed.
This is most easily done by:
• pressing the READ button or
• pressing the main beam flash or
• turning on the ignition.
The parking heater can be started immediately or set with two different start times using
TIMER 1 and TIMER 2. Start time refers to
the time the car should be heated and ready.
The car’s electronic system calculates when
heating should be started based on the
outside temperature. If the outside temperature exceeds 25 °C, the heater does not
switch on. At temperatures of R10 °C and
• Switch off the fuel-driven heater before
refuelling. Fuel that has been spilled on the
ground could be ignited by the exhaust
gases.
• Check the information display to ensure
the heater is off (PARK HEAT ON is
shown on the display when the parking
heater is active).
WARNING!
The car must be outdoors when the petrol
or diesel heater is used.
Messages on the display
Warning decal on fuel filler flap
Parking on a hill
If you park your car on a steep incline, the
front of the car should be facing up the slope
to ensure the supply of fuel to the parking
heater.
Car clock/timer
For safety reasons, all timer settings will be
cleared if the car clock is reset after timer
settings have been made.
Once the settings for TIMER 1, TIMER 2 and
Direct Start are activated, the amber warning
symbol in the combined instrument panel lights
and explanatory text is shown on the display.
When you leave the car, you will receive a
message regarding the current settings of the
system.
ST
Climate control
Fuel-driven heater (option)
Setting TIMER 1 and 2
For reasons of safety, you can only
programme times for the following 24 hours,
not several days in a row.
– Use the ring (B) to toggle to TIMER 1.
– Briefly press the RESET button (C) so
that the hours setting starts to flash.
– Use the ring (B) to set the desired hours.
– Briefly press the RESET button so that the
minutes setting starts to flash.
– Use the ring (B) to set the desired
minutes.
– Briefly press the RESET button to confirm
your setting.
– Press the RESET button to activate the
timer.
After setting TIMER 1, toggle to TIMER 2.
Settings are made the same way as for
TIMER 1.
Deactivating timer-started
heating
Do as follows to manually switch off the
heater before the set time has elapsed:
– Press the READ button (A).
– Use the ring (B) to toggle to PARK
HEAT TIMER 1 (or 2). The text ON
flashes.
SU
– Press the RESET button (C). The text
OFF is displayed with a steady glow and
the heater is switched off.
Direct start
– Use the ring (B) to toggle to DIRECT
START.
– Press the RESET button (C) to access
the alternatives ON or OFF.
Select ON.
The heater will now run for 60 minutes.
Heating of the passenger compartment will
begin as soon as the engine coolant has
reached an adequate temperature.
Deactivating heater after direct start
– Use the ring (B) to toggle to DIRECT
START.
– Press the RESET button (C) to make ON
and OFF selections available.
– Select OFF.
Battery and fuel
If the battery is not sufficiently charged or the
petrol tank is close to empty, the parking
heater will be switched off.
If this is the case, a message will appear on
the display. Acknowledge the message using
the READ button (A).
Important!
Repeated use of the parking heater in
combination with short trips can lead to
battery discharge and thereby difficulty
starting.
If the heater is used regularly, the car
should be driven for the same amount of
time as the heater was used in order to
ensure that the generator is able to
produce enough energy to compensate
for the amount consumed.
Additional heater (diesel)
(certain countries)
Extra heat from the additional heater may be
required in cold weather to reach the correct
temperature in the passenger compartment.
The additional heater starts automatically
when extra heat is required if the engine is
running. It is switched off automatically when
the correct temperature is reached or when
the engine is switched off.
Interior
Front seats
Interior lighting
Storage spaces in the passenger compartment
Rear seat
Cargo area
70
73
75
79
81
SV
Interior
Front seats
WARNING!
• Adjust the position of the driver’s seat
before setting off, never while driving.
• Check that the seat is locked in
position.
Seating position
Lowering the front seat backrest
The driver’s and passenger seats can be
adjusted to the optimum sitting and driving
positions
The passenger seat backrest can be folded
forward to make room for long loads.
1.
Forward/backward: lift the handle to
adjust the distance to the steering wheel
and pedals. Check that the seat is
locked after changing position.
Raise/lower front edge of seat cushion:
pump up/down4.
Raise/lower seat: pump up/down
Adjust lumbar support: turn the wheel.
Backrest rake: turn the wheel.
Power seat control panel.
2.
3.
4.
5.
6.
4.
TM
The control panel (2) is not available
with certain upholstery alternatives.
– Move the seat as far back as possible.
– Adjust the backrest to an upright position
90 degrees.
– Lift the catches on the rear of the backrest
while folding it forwards.
– Slide the seat forward so that the head
restraint is "locked in place" under the
glovebox.
Power seat (option)
Preparations
The seat is usually adjusted with the ignition
key is in position I or II. It can also be
Interior
adjusted within 4.5 minutes of unlocking the
door with the key or remote control. If the door
is closed but the ignition key has not yet been
inserted in the ignition switch or is in position
0 in the ignition switch, settings can be made
within 40 seconds of closing the door.
Memory function in the remote
control (option)
If the setting of the seat is changed, the new
setting is saved in the remote control used to
lock the car. The next time the car is unlocked
using that remote control and the driver’s
door is opened within five minutes, the
driver’s seats and door mirrors assume the
stored positions.
Seat adjustment
The switches can be used to make the
following adjustments:
1. Front edge of seat cushion up/down
2. Seat forward/rearward
3. Seat up/down
4. Backrest rake
The seat can be moved in one direction at a
time. The power seats have an overload
protector that activates if a seat is blocked by
an object. If this occurs, switch off the ignition
(position 0) and wait 20 seconds before
operating the seat again.
Seat with memory function
(option)
5.
Setting seat and door mirrors,
program 1
6. Setting seat and door mirrors,
program 2
7. Setting seat and door mirrors,
program 3
8. Storing preset positions
Three positions can be stored. After adjusting
the seat, hold the MEM (8) button depressed
while pressing the button (5). Further seat
and door mirror settings can be stored using
memory buttons (6) and (7).
TN
Interior
Front seats
Setting preset positions
Press and hold one of the memory
buttons (5),(6) or (7) until the seat stops. If
you release the button, the seat stops
immediately for safety reasons.
Emergency stop
If the seat accidentally begins to move, press
one of the buttons to stop the seat.
WARNING!
Ensure that there is nothing in front of,
behind, or under the seat during
adjustment.
Ensure that none of the backseat
passengers will be trapped.
To avoid injury, ensure that children do not
play with the switches.
TO
Interior
Interior lighting
General lighting switches off:
• the engine is started.
• you lock the car from outside using the
key or remote control.
Unless switched off manually, general lighting
goes out automatically 10 minutes after the
engine is switched off.
General lighting can be switched off or on in
all situations by briefly pressing the button.
You can disconnect the automatic function by
pressing the button for more than 3 seconds.
When you then briefly press the button, the
automatic function reconnects.
General lighting
General lighting is activated and deactivated
by pressing the centre button. General
lighting comes on automatically5 and remains
lit for 30 seconds:
• When you unlock the car from the outside
using the key or remote control.
• When you have stopped the engine and
turned the ignition key to position 0.
General lighting switches on and remains lit
for 10 minutes:
The pre-programmed times of 30 seconds
and 10 minutes can be changed. Contact an
authorised Volvo workshop.
Reading lamps front and rear
Switch on the front seat or rear seat reading
lamps with the corresponding button.
The lamps switch off automatically
10 minutes after the ignition has been turned
off if not switched off manually.
• one of the doors is open.
• general lighting is not switched off.
5.
The function is light-dependent and is
only activated when it is dark.
TP
Interior
Interior lighting
Vanity mirror6
The light comes on automatically when the
cover is lifted.
6.
TQ
Option on certain markets.
Interior
Storage spaces in the passenger compartment
2
3
4
5
1
6
8
7
TR
Interior
Storage spaces in the passenger compartment
Storage spaces
1.
2.
3.
4.
5.
6.
7.
8.
Storage pocket
Compartment in door panel.
Storage pocket
Ticket clip.
Cup holder (option)
Glovebox.
Storage compartment in the centre
console
Cup holder in the armrest, rear seat.
WARNING!
Ensure that no hard, sharp or heavy
objects lie or protrude in such a way that
they could cause injury during heavy
braking.
Always secure large and heavy objects
with a seatbelt or cargo retaining straps.
Storage compartment in centre
console
3.
4.
1. Rear storage compartment
The rear storage compartment of the centre
console can be used to store CDs and the
like. This storage compartment can be
equipped with:
Rear storage compartment cup
holder for rear seat passengers
Privacy handset + holder (option)
2. Front storage compartment
(roller cover)
This storage compartment can be equipped
with the following options:
• Cup holder (option)
• Ashtray (option)
TS
12 V socket
Ashtray (option)
To access the storage compartment/privacy
handset, press the button on the left-hand
side of the armrest and fold the tunnel
compartment cover back. To use the cup
holder, press the button on the right-hand
side of the armrest and fold the upper part of
the tunnel compartment cover back. The cup
holder and cover can be closed separately.
Interior
Rear storage compartment cup
holder (option)
Dashboard cup holder (option)
Glovebox
The cup holder can be easily removed:
• Press the holder to open.
• Press the holder in after use.
1.
2.
3.
The glovebox can be used to store things
such as the owner’s manual, maps, pens and
petrol cards.
NOTE! Never use glass bottles. Remember
also that hot drinks may cause burns.
Floor mats (option)
Snap the rear edge of the cup holder up.
Slide the cup holder back.
Angle the front edge of the cup holder
up and lift out.
Repeat the procedure in reverse order to refit
the cup holder.
Volvo offers custom made floor mats for your
car. They must be properly placed and
secured in the mat clips on order that they not
become entangled the pedals.
TT
Interior
Storage spaces in the passenger compartment
Coat hanger
The coat hanger is only intended for light
garments.
Bottle holder for rear seat
passengers (option)
Do as follows to use the bottle holder:
– Open the holder.
– Insert the bottle.
The bottle holder can also serve as a waste
bin. Insert a bag into the holder and fold it
over the edges.
NOTE! The bin does not require special
bags. – Use a regular plastic bag.
TU
Cup holder in the armrest, rear
seat
Interior
Rear seat
Adjusting the vertical position of the head
restraint
Head restraints in the rear seat
The centre seat head restraint can be
adjusted vertically to suit the height of the
passenger. Raise the head restraint as
needed. The release button on one of the
supports must be pressed to push the head
restraint down. See the illustration!
Tipping the rear seat backrest
Both rear seat backrests can be tipped
forward, together or individually. This makes it
easier to transport long objects.
Fold the rear seat backrests as follows:
– First check that the head restraints have
not been lowered.
– Pull the handle in the cargo compartment
as shown in the illustration.
– Fold the backrest forward.
WARNING!
Always secure the load. _During heavy
braking the load may otherwise shift,
causing personal injury. Cover sharp
edges with something soft. Turn off the
engine and apply the parking brake when
loading or unloading long objects! You
may accidentally knock the gear lever or
gear selector with the load and cause a
gear to engage and the car to move off.
TV
Interior
Rear seat
Hatch for long objects
A hatch in the right-hand rear backrest allows
you to transport long objects such as skis and
planks. Open the hatch as follows:
– Fold the right-hand backrest forward. See
page 70.
– Release the hatch by pushing the catch
upward while folding the hatch forward.
– Tip the backrest back into position with
the hatch open.
Use the seatbelt to secure the load.
UM
Interior
Cargo area
The payload of the car is reduced by the
number of passengers and their weight.
WARNING!
The driving characteristics of the car
change based on its kerb weight and how
heavily it is loaded.
Bag holder (option)
Open the hatch in the cargo compartment.
Hang or secure your grocery bags using the
tensioning strap.
General
Payload depends on the car’s total kerb
weight, including any accessories that are
mounted. Kerb weight includes the driver, the
weight of the fuel tank when filled to 90% and
various fluids, such as washer fluid and
coolant. Mounted accessories, i.e. towbar,
load carrier, roof box, etc., are included in the
kerb weight.
UN
Interior
UO
Locks and alarm
Keys and remote controls
Locking and unlocking
Child safety locks
Alarm (option)
84
86
90
91
UP
Locks and alarm
Keys and remote controls
Keys – Electronic immobiliser
Your car is delivered with two master keys
and one service key. One of the master keys
is foldable and equipped with an integrated
remote control.
N
Loss of key
If you should lose one of your keys, bring the
remaining keys to an authorised Volvo
workshop. As a crime prevention measure,
the code for the lost key is erased from the
system and the other keys must be re-coded
in the system.
The mechanical code numbers for the keys
are recorded on a separate label accompanying the keys. Store the label in a safe place.
Take the label to your Volvo dealer if you wish
to order new keys. A maximum of six remote
controls/keys can be programmed and used.
O
1.
Master key
This key opens all locks.
2.
Service key4
This key is for the front door, ignition
switch and steering wheel lock only.
4.
UQ
certain markets only.
Immobiliser
The keys are equipped with coded chips. This
code must match the reader in the ignition
switch. The car can only be started if the
correct key with the correct code is used.
Ignition keys and electronic
immobiliser
The ignition key must not hang with other keys
or metal objects on the same key ring. The
electronic immobiliser could be activated
erroneously and the car will not start.
Locks and alarm
S
N
O
R
Q
1.
2.
3.
4.
5.
6.
P
Unlock
Open the boot lid.
Alarm function
Approach lighting
Locks
Folding/opening the key
Remote control functions
Unlocking
– Press button (1) to unlock all doors, the
boot lid and the fuel filler flap.
Boot lid
– Press button (2) twice to unlock the boot
lid only.
Alarm function
The alarm function can be used to attract
attention in the event of an emergency. If the
red button (3) is held depressed for at least
three seconds or is pressed twice in a short
period of time, the direction indicators and
horn are triggered. The alarm is deactivated
automatically after 25 seconds or by pressing
any of the buttons on the remote control.
Folding/opening key
The key can be folded by pressing button 6
while folding the key blade into the keypad.
The folding key will open automatically with
one press of the button.
Approach lighting
Do the following when you approach the car:
– Press the yellow button (4) on the remote
control.
The interior lighting, position/parking lamps,
number plate lighting and door mirror lamps
(option) will switch on. These lamps will
remain lit for 30, 60 or 90 seconds. An
authorised Volvo workshop can select a
suitable time setting.
To extinguish the approach lighting:
– Press the yellow button again.
Locking
Lock all doors, boot lid and fuel filler flap with
button 5.
There is a delay of approx. 10 minutes for the
fuel filler flap.
UR
Locks and alarm
Locking and unlocking
Turn the old battery in to your Volvo workshop
so that it can be disposed of in an environmentally friendly manner.
Changing the remote control
battery
Replace the battery after repeated failure by
the locks to respond when remote control
signals are transmitted within a normal
distance.
– Remove the cover by carefully prising up
the rear edge of with a small screwdriver.
– Change the battery (type CR 2032,
3 volt); – the plus side should face up.
Avoid touching the battery and its contact
surfaces with your fingers.
– Refit the cover. Make sure the rubber seal
is properly fitted and free from damage to
prevent water from entering.
US
Locks and alarm
the car from being left unlocked unintentionally. For cars with alarms, see page 91
Automatic locking (option)
The doors lock automatically when vehicle
speed exceeds 7 km/h and remain locked
until a door is opened from the inside or
unlocked using a central locking button.
Locking/unlocking the car from
the outside
Locking and unlocking the car
from the inside
All doors and the boot lid can be unlocked
simultaneously – from the outside – using the
master key or its remote control. In this mode,
all side door locks and inside door handles
are inoperative.
Using the control in the door panel, you can
lock or unlock all doors and the boot lid simultaneously.
The fuel filler flap can be opened when the
car is unlocked. The flap remains unlocked for
10 minutes after the car has been locked.
Additionally, each door can be locked with
the lock button and unlocked by opening the
door using the handle.
The above applies only if the car was not
locked from the outside!
Automatic relocking
If none of the doors or the boot lid is opened
within two minutes of unlocking, all are locked
again automatically. This function prevents
UT
Locks and alarm
Locking and unlocking
Unlocking/locking the boot lid
with the remote control
Do as follows to unlock the boot lid only:
– Press the remote control button for the
boot lid two times. The boot lid is
unlocked and opens slightly.
– If all doors are locked when you close the
boot lid, it locks automatically.
Unlocking the boot lid with the
master key
Service locking, boot lid
The master key should be used when
unlocking the boot lid manually during
emergencies only, e.g. if the remote control
does not function or the car is without power.
Open the boot lid as follows:
This function is beneficial if the car is left for
service, with a hotel parking valet or the like.
The service key is left with the staff, who can
open and drive the car but do not have
access to the boot lid (or the glovebox if it is
locked with the master key).
– Insert the master key into the upper or
lower section of the lid covering the lock.
– Twist up or down in order to prise the lid
off.
– Unlock the boot lid.
UU
(certain countries)
To activate service locking:
– Turn the master key to position II.
– Press the button. An LED in the button
lights when the function is activated and a
message is shown on the display.
To deactivate service locking:
Locks and alarm
message is shown on the display as long as
the key remains in the ignition switch. The
sensors will be reactivated the next time the
ignition is switched on.
– Turn the master key to position II and
press the button again.
Locking the glovebox
The glovebox can only be locked/opened
using the master key – not with the service
key.
WARNING!
Do not allow anyone to remain in the car
without first deactivating the deadlock.
Deadlocks5
Your car has a special deadlock function,
which means that the doors cannot be
opened from the inside if they are locked.
Deadlocks can only be activated from the
outside by the driver’s door being locked with
the key or remote control. All doors must be
closed before deadlocks can be activated.
Once activated, the doors cannot be opened
from the inside. The car can only be unlocked
from the outside via the driver’s door or by
using the remote control.
Deadlocks are engaged after a 25 second
delay once the doors have been closed.
5.
Certain countries
Temporary deactivation of the
deadlocks and any detectors
If others prefer to remain seated in the car
with the doors locked from the outside – e.g.
during transport by ferry, – it is possible to
deactivate the deadlocks.
– Insert the key into the ignition switch, turn
it to position II and then back to position I
or 0.
– Press the button.
If the car is equipped with an alarm,
movement and tilt detectors are also deactivated. See page 92.
The LED in the button lights until the car is
locked with the key or remote control. A
UV
Locks and alarm
Child safety locks
Control for child safety lock – left rear door
Mechanical child safety lock –
rear doors
The controls for the child safety locks are in
the rear edges of the rear doors and are only
accessible when the door is open. Use the
ignition key to turn the control and thus
activate or deactivate the child safety lock.
A.
Doors cannot be opened from the inside
(turn outwards).
B. Doors can be opened from the inside
(turn inwards).
VM
Child safety lock controls – right rear door.
WARNING!
Remember that in the event of an
accident, rear seat passengers cannot
open rear doors from the inside if the child
safety locks are activated.
Therefore, keep the doors unlocked
while driving!
In the event of an accident, rescue
personnel will then be able to enter the car
quickly from the outside.
Locks and alarm
Alarm (option)
The alarm system
When the alarm is armed, it continually
monitors all alarm inputs. The alarm is
triggered if:
•
•
•
•
•
•
•
•
the bonnet is opened
the boot lid is opened
a side door is opened
the ignition switch is turned with a nonapproved key or subjected to force
movement is detected in the passenger
compartment (if a motion sensor is fitted –
option for certain markets only)
the car is raised or towed away (if a tilt
sensor is fitted – option for certain
markets only)
a battery cable is disconnected.
anyone tries to disconnect the siren.
Activating the alarm
Press the LOCK button on the remote
control. A long flash signal from the direction
indicators of the car confirms that the alarm is
activated and all doors are closed. In certain
markets, the key or the control in the driver’s
door can be used to arm the alarm.
Deactivating the alarm
Press the UNLOCK button on the remote
control. Two short flash signals from the
direction indicators of the car confirm that the
alarm is deactivated. In certain markets, the
key can be used to deactivate the alarm.
Automatic alarm activation
If none of the doors or the boot lid is opened
within two minutes of the alarm being deactivated, and the car was unlocked with the
remote control, the car reactivates the alarm
automatically. The car locks at the same time.
This function prevents you from accidentally
leaving the car without the alarm on.
In certain countries (e.g. Belgium, Israel) the
alarm is reactivated after a certain delay if the
driver’s door was opened and closed but the
car was not re-locked.
Deactivating a triggered alarm
Press the UNLOCK button on the remote
control if the alarm sounds and you wish to
deactivate it. Two short flashes of the
direction indicators are given as confirmation.
Audio signal – Alarm
The audio signal is given from a siren with a
reserve battery. Each alarm signal lasts
25 seconds.
Visual signal – Alarm
When the alarm is triggered, all direction
indicators flash for 5 minutes or until the
alarm is deactivated as described earlier.
VN
Locks and alarm
Alarm (option)
The sensors will be reactivated when the
ignition is restarted.
If your car has deadlocks, they are reactivated
at the same time. See page 89.
Indicator lamp on the
dashboard (certain countries)
An indicator lamp (LED) at the top of the
dashboard indicates alarm status:
Temporary deactivation of
detectors and deadlocks
To avoid inadvertently triggering of the alarm,
for example when leaving a dog in the car or
during a ferry crossing, the movement and tilt
detectors can be temporarily deactivated:
– Insert the key in the ignition switch, turn it
to position II and then back to position I
or 0.
– Press the button.
The LED in the button lights until you lock the
car with the key or remote control.
A message will be shown in the display as
long as the key remains in the ignition switch.
VO
• Lamp not lit: Alarm is deactivated.
• The lamp flashes once every other
second: the alarm is armed.
• Lamp flashes quickly, after deactivating
the alarm and until the ignition is switched
on: The alarm has been triggered.
If there is a fault in the alarm system, a
message appears on the display.
If the alarm system does not function
correctly, have an authorised Volvo workshop
examine the car.
WARNING!
Do not attempt to repair or modify alarm
system components. All such attempts
can affect terms of insurance.
Locks and alarm
Testing the alarm system
Testing the passenger compartment
motion sensor:
– Open all the windows.
– Activate the alarm. Alarm activation is
confirmed with a slow flash of the LED.
– Wait 30 seconds.
– Test the movement detector in the
passenger compartment by lifting a bag
or the like from the seat. The alarm should
now sound and flash.
– Deactivate the alarm by unlocking the car
with the remote control.
Testing the doors
– Arm the alarm.
– Wait 30 seconds.
– Unlock the driver’s door with the key
blade.
– Open one of the doors. The alarm system
should sound and flash.
– Repeat the test for the other doors.
– Deactivate the alarm by unlocking the car
with the remote control.
Testing the bonnet
– Get into the car and deactivate the
movement detector.
– Arm the alarm (remain in the car and lock
the doors with the button on the remote
control).
– Wait 30 seconds.
– Open the bonnet with the handle under
the dashboard. The alarm should now
sound and flash.
– Deactivate the alarm by unlocking the car
with the remote control.
Testing the boot lid:
– Arm the alarm.
– Wait 30 seconds.
– Unlock with the key on the driver’s side.
– Open the boot lid. The alarm should now
sound and flash.
– Deactivate the alarm by unlocking the car
with the remote control.
VP
Locks and alarm
VQ
Starting and driving
General
Refuelling
Starting the car
Manual gearbox
Automatic gearbox
Brake system
Stability system
Parking assistance (option)
Towing and recovery
Start assistance
Driving with a trailer
Towing equipment
Detachable towbar
Load on the roof
Adjusting headlamp pattern
BLIS (Blind Spot Information System)
96
98
99
100
101
104
106
108
110
112
113
115
117
119
121
126
VR
Starting and driving
General
Economical driving
Economical driving results from driving gently
with anticipation and adapting your driving
style and speed to the situation.
Keep in mind the following:
• Drive the engine to operating temperature
as soon as possible! That is to say: do not
let the engine idle, but drive with a light
load as soon as you can.
• A cold engine consumes more fuel than a
warm one.
• Avoid driving short distances where the
engine never has time to reach operating
temperature.
• Drive gently! Avoid unnecessary quick
accelerations and heavy braking.
• Do not drive with unnecessary, heavy
loads in the car.
• Do not use winter tyres when the roads
are clear and dry.
• Remove the load carrier when it is not in
use.
• Do not open side windows unnecessarily.
Do not drive with an open boot
lid!
If you drive with the boot lid open, some of the
exhaust gases and poisonous carbon
monoxide could be sucked into the car
VS
through the cargo compartment. If you must
drive a short distance with the boot lid open,
do as follows:
• Close all windows.
• Distribute the air between the windscreen
and floor while running the fan at high
speed.
Your new car – slippery road
surfaces
Driving on a slippery road may feel different
depending on whether you choose a car with
a manual or an automatic gearbox. Practice
skid driving under controlled conditions so
that you know how your new car reacts.
Do not overload the battery
The electrical functions in the car load the
battery to varying degrees. Avoid having the
ignition key in position II when the engine is
turned off. Use position I instead, as less
power is used. The 12 volt outlet in the cargo
area supplies power even when the ignition
key is removed.
Examples of functions that use a lot of power:
•
•
•
•
ventilation fan
windscreen wipers
audio system
parking lights
Also take note of different accessories that
load the electrical system. Do not use
functions that consume a lot of current when
the engine is switched off. A text is shown on
the display in the combined instrument panel
if battery voltage is low. The message in the
display remains until the engine has started.
The energy economy function shuts down
certain functions or reduces the load on the
battery, e.g. by lowering ventilation fan speed
and switching off the audio system.
Charge the battery by starting the engine.
Do not allow the engine and
cooling system to overheat
Under certain conditions, e.g. when driving in
hilly terrain and with a heavy load, especially in
warm weather, there is a risk of the engine
and cooling system overheating.
To avoid overheating in the cooling
system:
• Drive at low speeds if driving with a trailer
up a long incline.
• Switch off the air conditioning temporarily.
• Avoid letting the engine idle.
• Do not turn the engine off immediately you
stop, if the car has been driven hard.
• Remove any auxiliary lamps from in front
of the grille if driving in extreme high
temperatures.
Starting and driving
To avoid the engine overheating:
Do not exceed engine speeds of 4500 rpm if
driving with a trailer or caravan in hilly terrain.
The oil temperature can become too high.
VT
Starting and driving
Refuelling
After refuelling, replace the fuel cap and turn
until one or more clicks is heard.
WARNING!
Never carry an activated mobile phone
when refuelling the ring signal could
cause spark build-up and ignite petrol
fumes, leading to fire and injury.
Refuelling with petrol
NOTE! Do not add cleaning additives unless
specifically recommended by a Volvo
workshop.
Opening the fuel filler flap
The fuel filler flap can be opened when the
car is unlocked.
NOTE! The filler flap remains unlocked for ten
minutes after the car has been locked.
Fuel filler flap
The fuel cap is inside the fuel filler flap on the
right rear wing.
There may be overpressure in the tank if
outdoor temperatures are high. Open the cap
slowly. Do not overfill the fuel tank. Stop
refuelling when the pump cuts out for the first
time! If the tank is overfilled fuel may overflow
at high temperatures!
VU
Important!
Petrol-powered cars must always be
refuelled with unleaded petrol so as not to
damage the catalytic converter.
Refuelling with diesel
At low temperatures, paraffin can emanate
from diesel fuel ( –5°C - –40°C), which may
cause problems when starting. Make sure
you use a special winter grade fuel during
cold weather.
Starting and driving
Starting the car
Starting the engine (petrol)
– Apply the parking brake (handbrake).
– Automatic gearbox
Gear selector in P or N position.
Manual gearbox
Gear lever in neutral and the clutch pedal
completely depressed. This is especially
important in severe cold.
– Turn the ignition key to the start position. If
the engine does not start within
5-10 seconds, release the key and repeat
the start attempt.
Starting the engine (Diesel)
– Apply the parking brake (handbrake).
– Automatic gearbox
Gear selector in P or N position.
Manual gearbox
Gear lever in neutral and the clutch pedal
completely depressed. This is especially
important in severe cold.
– Turn the ignition key to the driving
position. A symbol on the combined
instrument panel will come on indicating
that the engine preheater is activated.
Turn the key to the start position when the
lamp extinguishes.
NOTE! Depending on the temperature of the
engine during start, idle speed during cold
starts may be higher than normal for certain
engine types – for a short duration.
For this reason, Volvo wishes to provide the
correct emission control system operating
temperature as quickly as possible in their
efforts to minimise exhaust emissions.
Ignition keys and electronic
immobiliser
The ignition key must not hang with other keys
or metal objects on the same key ring. The
electronic immobiliser could be activated
accidentally. If this happens, remove the
excess keys and restart the car.
Never rev the engine hard straight after a cold
start! If the engine does not start or misfires,
contact a Volvo workshop.
WARNING!
Never remove the ignition key from the
steering wheel lock while driving or when
the car is being towed! Never switch off
the ignition (key to position 0) or remove
the ignition key while the car is in motion.
The steering wheel lock could be
activated, making the car impossible to
steer.
Ignition switch and steering
lock
0 – Locked position
The steering wheel locks
when the ignition key is
removed.
I – Intermediate position
– "radio position"
Certain electrical components can be switched on.
The engine’s electrical
system is not activated.
II – Driving position
The key position when
driving. The car’s entire
electrical system is
connected.
III – Start position
The starter motor is
connected. Release the key
once the engine has started.
The key automatically springs
back to the driving position. If
the key is hard to turn, the front wheels may be
turned in such a way that there is tension in the
steering wheel lock. Turn the wheel back and
forth to make it easier to turn the key.
Ensuring that the steering wheel is locked when
you leave the car minimises the risk of theft.
VV
Starting and driving
Manual gearbox
Gear positions, five-speed
Reverse gear inhibitor
Gear positions, six-speed
Depress the clutch pedal fully with each gear
change. Remove your foot from the clutch
pedal between gear changes! Follow the
appropriate shifting pattern.
Engage reverse gear when the car is
completely stationary.
Depress the clutch pedal fully with each gear
change. Remove your foot from the clutch
pedal between gear changes! Follow the
appropriate shifting pattern.
For the best possible fuel economy, use the
highest gear possible as often as possible.
NMM
To put the car in reverse, the gear lever must
first be moved to neutral (between 3rd and
4th gear). Thus, reverse cannot be directly
selected from 5th gear due to the reverse
gear inhibitor.
For the best possible fuel economy, use the
highest gear possible as often as possible.
Starting and driving
Automatic gearbox
Cold start
Safety systems
When starting in low temperatures, the gear
changes can sometimes feel hard. This is due
to the gearbox oil’s viscosity at low temperatures. To minimise engine emissions, the
gearbox shifts up later than normal when the
engine is started at low temperatures.
Cars with an automatic gearbox have special
safety systems:
NOTE! Depending on the engine temperature when the engine is started, the idle
speed after a cold start may be higher than
normal for certain engine types.
Keylock
To remove the ignition key, the gear selector
must be in the P position. The key is locked in
all other positions.
Parking position (P)
Stationary car with engine running:
Adaptive system
– Hold your foot on the brake pedal when
moving the gear selector to another
position.
Electric gear inhibitor – Shiftlock
Parking position (P position)
To be able to move the gear selector from the
P position to other gear positions, the ignition
key must be in position I or II and the brake
pedal must be depressed.
The gearbox is controlled by what is known as
an adaptive system. The system continually
monitors how the gearbox is behaving and
senses every gear change for optimum
change quality.
Neutral position (N position)
The brake pedal must be depressed to move
the gear selector from position N to other
gear positions when the ignition key is in
position I or II.
Turbo engine
When the engine is cold, the transmission
shifts gears at higher revs. This allows the
catalytic converter to reach normal operating
temperature more quickly, with less exhaust
emissions.
Mechanical gear selector
inhibitor
The gear selector can be moved freely
between N and D. Other positions are locked
with a latch that is released with the inhibitor
button on the gear selector.
Press the inhibitor button to move the lever
forward or back between the different gear
positions.
Lock-up function
The gears have a lock-up function (locked
gears), which gives better engine braking and
lower fuel consumption.
NMN
Starting and driving
Automatic gearbox
Geartronic4
The S60 R with Geartronic has an S button
instead of a W button located at the gear
selector. The gearbox sports programme is
activated using the S button. An LED is lit in
the button to indicate active mode.
The S programme provides sportier characteristics. It allows higher engine speed for the
gears while responding more quickly to acceleration. During active driving, the use of a
lower gear is prioritised, – leading to a
delayed upshift.
4. S60 R has Geartronic as standard.
NMO
Manual positions, Geartronic
To move from the automatic driving position D
to a manual position, move the gear selector
to the right. To go from position MAN to the
automatic driving position D, move the
selector to the left to position D.
While driving
The manual gearshift mode can be selected
at any time while driving. The engaged gear is
locked until you choose another gear. The car
will only shift down automatically if you slow
down to a very slow speed.
If the gear lever is moved to – (minus) the car
changes down a gear and engine brakes. If
the gear lever is moved to + (plus) the car
changes up a gear.
P – Park
Select this position when you wish to start the
engine or park the car.
The car should be stationary when you
select P!
In P the gearbox is mechanically locked.
Always apply the parking brake when parking
the car.
R – Reverse
The car should be stationary when you
select R.
N – Neutral
N is the neutral position. No gear is engaged
and the engine can be started. Apply the
Starting and driving
parking brake when the car is stationary with
the gear selector is in position N.
D – Drive
D is the normal driving position. The car
automatically shifts between the different
gears of the gearbox based on the level of
acceleration and speed. The car should be
stationary when selecting D from position R.
4 – Low gear
Up and downshifts between 1st, 2nd, 3rd and
4th are automatic. There is no upshift to 5th
gear.
Position 4 can be used:
• for mountain driving
• when driving with a trailer
• to increase engine braking
3 – Low gear
Up and downshifts between 1 st, 2 nd, and
3 rd are automatic. There is no upshift to 4 th
gear.
Position 3 can be used:
• for mountain driving
• when driving with a trailer
• to increase engine braking
L – Low gear
Select L if you wish to drive in 1st or 2nd.
Position L gives the best engine braking for
mountain driving, etc.
W – Winter.
button5
The W
by the gear
selector engages and disengages the winter programme
W. The symbol W is shown
in the combined instrument
panel when the winter
programme is activated.
The winter programme starts the gearbox in
3rd gear to make it easier to pull off on
slippery roads. When the programme is
engaged, lower gears are activated only by
kick-down.
The W programme can only be selected in
position D.
Kick-down
When the accelerator is pressed all the way
to the floor, beyond the position normally
regarded as full acceleration, a lower gear is
immediately engaged. This is known as kickdown.
When maximum speed for this gear is
reached, or if the accelerator is released from
the kick-down position, the gearbox automatically changes up.
Kick-down is used when maximum acceleration is needed, such as for overtaking.
5.
S60R with Geartronic has an S
button instead.
To prevent overrevving, the gearbox control
program has a protective downshift inhibitor.
The kick-down function6 cannot be used in
the manual positions. Return to automatic
position D.
All-wheel drive – AWD
All-wheel drive is always engaged.
All-wheel drive means that all four road
wheels are driven at the same time. Power is
automatically distributed between front and
rear wheels. An electronically controlled
clutch system distributes the power to the
pair of wheels that grips best. This provides
the best traction and prevents wheel spin.
Under normal driving conditions, the majority
of power is transmitted to the front wheels.
All-wheel drive improves driving safety in rain,
snow and icy conditions.
Speed related power steering7
If the car is equipped with speed related
power steering this means that it is easier to
steer at low speeds, which in turn facilitates
parking etc.
As speed is increased the steering force is
adapted to give the driver enhanced sensitivity.
6.
7.
Applies to Geartronic only.
Option
NMP
Starting and driving
Brake system
Brake servo
If the car is rolling or is being towed with the
engine turned off, the brake pedal must be
pressed about five times harder than when
the engine is running. If the brake pedal is
pressed when the engine is started, you will
feel the pedal drop. This is normal and due to
the brake servo becoming active. This may be
more noticeable if the car has emergency
brake assistance (EBA).
NOTE! If braking with the engine switched
off, press the brake pedal sharply once, not
repeatedly.
WARNING!
The brake servo only works when the
engine is running.
Brake circuits
This symbol lights if a brake circuit is
not working.
If a fault should occur in one of the
circuits, it is still possible to brake the car. The
brake pedal will travel further and may feel
softer than normal. Harder pressure on the
pedal is needed to produce the normal
braking effect.
NMQ
Dampness can affect braking characteristics
Brake components become wet when the car
is driven in heavy rain, through pools of water
or when the car is washed. This may alter
brake pad friction characteristics so that there
is a delay before braking effect is noticed.
Press the brake pedal lightly from time to time
if driving for long stretches in rain or slushy
snow, as well as after setting off in very damp
or cold weather. This warms up the braking
surfaces and dries off any water. It is also
recommended to do this before parking the
car for a long period in such weather conditions.
If the brakes are used heavily
When driving in the Alps or other roads with
similar characteristics, the car’s brakes are
heavily loaded even if the brake pedal is not
being depressed especially hard.
Because speed is often low, the brakes are
not cooled as effectively as when driving on
flat roads at higher speed.
So as not to overload the brakes, shift down
when driving downhill instead of using the
foot brake. Use the same gear driving
downhill as you would use driving uphill. This
using engine braking more efficiently and
requires the foot brake for only brief periods.
WARNING!
If the BRAKE and ABS warning symbols
are lit at the same time, a fault may have
occurred in the brake system. If the level in
the brake fluid reservoir is normal, drive
carefully to the nearest authorised Volvo
workshop to have the brake system
checked.
If the brake fluid is under the MIN level in
the brake fluid reservoir, do not drive
further before topping up the brake fluid.
The reason for the loss of brake fluid must
be investigated.
Bear in mind that driving with a trailer puts an
additional load on the car’s brakes.
Anti-lock braking system (ABS)
Anti-lock brakesABS
The ABS system (Anti-lock Braking
System) is designed so that the
wheels do not lock when braking. This retains
the best possible steering response when
braking. This improves your ability to swerve
to avoid obstacles. The ABS system does not
increase your total braking capacity.
However, as the driver you have increased
ability to steer and thus better control over the
car, which in turn increases safety.
Starting and driving
After the engine has started and reached a
speed of about 20 km/h, a short self-test can
be both heard and felt. When the ABS system
functions, you can hear and feel pulses in the
brake pedal. This is completely normal.
NOTE! You must depress the brake pedal
fully to take maximum advantage of the ABS
system. Do not release the pedal when you
hear and feel the ABS pulses. Practice
braking with the ABS system at a suitable
spot such as a track to practice skidding.
The ABS symbol lights up:
• for approximately two seconds during the
system test when the car is started.
• if the ABS system has shut down due to a
fault.
Electronic brake force distribution
system – EBD
The Electronic Brakeforce Distribution
system (EBD) is an integrated part of the ABS
system. The EBD system controls the brake
force to the rear wheels so that the best
possible braking force is always available.
Pulses will be heard and felt through the
brake pedal when the system regulates brake
force.
WARNING!
If the BRAKE and ABS warning symbols
are lit at the same time, a fault may have
occurred in the brake system. If the level in
the brake fluid reservoir is normal, drive
carefully to the nearest authorised Volvo
workshop to have the brake system
checked.
If the level of brake fluid in the reservoir is
below the MIN mark, the car should not be
driven until the brake fluid has been
topped up.
The reason for the loss of brake fluid must
be investigated.
When the EBA function is activated, the brake
pedal sinks while maximum braking force is
applied. Continue braking without releasing
the brake pedal. The EBA function disengages when the pressure on the brake pedal
is released.
Emergency Brake Assistance – EBA
The Emergency Brake Assistance function is
integrated in the DSTC system and is
designed to provide immediate maximum
brake force whenever rapid braking is
necessary. The system detects the need for
heavier braking by registering how quickly the
brake pedal is applied.
The EBA function is active at all speeds. For
safety reasons, it cannot be switched off.
NMR
Starting and driving
Stability system
When the stability system8 is in action, it may
seem like the car does not respond normally
to acceleration. This is because the system
detects the amount of friction on the road
surface and allows the different stability
system functions to operate.
The car is either equipped with STC (Stability
and Traction Control) – Stability and traction
control system or DSTC (Dynamic Stability
and Traction Control) – Dynamic stability and
traction control system.
See page 33 for further information on
warning symbols in the combined instrument
panel
Function/ system
TC
SC
AYC
STC
X
X
DSTC1
X
X
X
1. Option on certain markets.
Traction Control (TC)
The Traction Control function transfers power
from the spinning drive wheel to the drive
wheel which has grip by braking the spinning
drive wheel. To increase forward traction in
this situation, it may be necessary to depress
the accelerator more than usual. A pulsing
sound is heard when Traction Control is
8.
NMS
Option on certain markets
working. This is completely normal. The TC
function is most active at low speeds. It
cannot be deactivated.
Spin Control (SC)
The Stability Control function prevents the
drive wheels from slipping during acceleration. This improves road safety on slippery
surfaces. Under certain conditions, such as
when driving with snow chains or in deep
snow or sand, it may be beneficial to
deactivate the SC function to increase
traction. This is done with the STC/DSTC
button.
Active Yaw Control (AYC)
The Active Yaw Control function automatically
brakes one or more wheels to stabilise the car
in the event of a skid. If the brake pedal were
to be depressed in this situation, it would feel
more rigid than usual and a pulsing sound
would be heard.
The AYC function is always active and cannot
be deactivated.
WARNING!
Suppressing the STC or DSTC system
may alter the driving characteristics of the
car. Always take care when cornering and
driving in slippery conditions.
Active chassis – FOUR-C9
The car is equipped with an extremely
advanced active chassis system – Continuously Controlled Chassis Concept – that is
regulated electronically. The functions of the
system are based on a number of sensors
that continually monitor the car’s movements
and reactions, such as vertical and lateral
acceleration, vehicle speed and wheel
movements.
The FOUR-C control unit analyses data from
the sensors and performs the necessary
shock absorber setting adjustments up to
500 times per second. This results in
extremely fast and accurate individual shock
absorber control, which contributes to variations in chassis characteristics.
Chassis characteristics can be modified at
any time while driving, when the nature of the
road changes or when you desire a change in
driving style. This change occurs in a matter
of milliseconds.
The effect produced by pressing the accelerator is linked to your choice of chassis
characteristics.
9.
Option in certain markets. Standard
on S60 R.
Starting and driving
to minimise rolling during quick cornering.
The car feels sportier.
When the ignition is switched off in Sport
setting, the chassis will resume the same
mode when the car is re-started.
FOUR-C switch in the centre console (not
S60 R)
Comfort
Comfort mode adjusts the chassis setting so
that the body is insulated from uneven
sections of the road surface, which allows for
better glide. Shock absorption is softer and
body movements are minimal. This setting is
recommended for long-distance driving or
driving on slippery road surfaces.
When the ignition is switched off in Comfort
setting, the chassis will resume the same
mode when the car is re-started.
Sport
In Sport mode, steering responses are
quicker than in Comfort mode. Damping is
harder and the body follows the road surface
FOUR-C switch (S60 R)
Advanced10
In Advanced mode, shock absorber
movements are minimal and optimised for
maximum traction. Acceleration response is
more direct, the automatic gearbox shift
schedule is sportier and roll during cornering
is minimised. This setting is recommended for
flat, even road surfaces only.
When the ignition is switched off in Advanced
setting, the chassis will resume the same
mode when the car is re-started.
10. Only available on S60 R.
NMT
Starting and driving
Parking assistance (option)
The system is always activated when the car
is started.
WARNING!
Parking assistance does not relinquish the
driver’s own responsibility during parking.
The sensors have blind spots where
objects cannot be detected. Be aware of
children and animals near the car.
Parking assistance, front and rear
General
Parking assistance is used as an aid to
parking. A signal indicates the distance to a
detected object.
The frequency of the signal increases as you
come closer to an object11 in front of or
behind the car.
The tone becomes constant at a distance of
about 30 cm. If there are objects within this
distance both behind and in front 1 of the car,
the signal alternates between front and rear
speakers.
If the volume of another sound source from
the audio system is high, this is automatically
lowered.
11.
NMU
Provided that the parking assistance
is mounted both front and rear.
Front parking assistance
The measurement area straight in front of the
car is approx. 0.8 m. The text message PARK
ASSIST ACTIVE appears in the audio display
when the sensors react to an obstacle in front
of the car.
Front parking assistance cannot be
combined with extra lights because the
sensors are affected by the extra lights.
Rear parking assistance
The measurement area straight behind the
car is approx. 1.5 m. The text message PARK
ASSIST ACTIVE appears in the audio display
when the gear is engaged.
The system must be deactivated when driving
with a trailer, bike carrier on the towbar or the
like as they would trigger the sensors.
Rear parking assistance is deactivated
automatically when towing a trailer if a Volvo
genuine trailer cable is used.
Deactivating and reactivating
the parking assistance
Parking assistance can be deactivated with
the button in the switch panel. The LED in the
switch goes out. Parking assistance is reactivated when the switch is turned on and the
LED illuminates.
Front parking assistance
The front parking assistance is active at
speeds of below 15 km/h, even during
reversing. The signal comes from the front
loudspeakers.
Rear parking assistance
Rear parking assistance is activated when
reverse gear is engaged. The signal comes
from the rear speakers.
Starting and driving
Fault indicator
The information symbol comes
on and stays lit
PARK ASSIST SERVICE
REQUIRED is shown in the information display in the centre of the combined
instrument panel together with the symbol.
Parking assistance sensors
Cleaning the sensors
The sensors must be cleaned regularly to
ensure that they work properly. Clean them
with water and car shampoo.
The sensors can react if covered by ice and
snow.
NMV
Starting and driving
Towing and recovery
Do not bump start the engine.
If you bump start a car with manual gearbox,
the catalytic converter may be damaged. Cars
with automatic gearbox cannot be bump
started. Use a booster battery if the battery is
flat.
If the car must be towed
• Unlock the steering wheel lock so that the
car can be steered.
• Keep in mind the highest legally permissible speed.
• Bear in mind that the brake and power
steering servos do not function when the
engine is off. Approx. five times more
pressure must be exerted on the brake
pedal and steering requires much more
force than usual.
• Drive gently.
• Keep the towline taut in order to avoid
unnecessary jerking.
For automatic gearboxes
• The gear selector should be in position N.
• The maximum permissible speed when
towing a car with automatic gearbox is
80 km/h.
• Longest permitted distance: 80 km.
• The engine cannot be towed to start
(bump started). See "Jump starting" on
the next page.
NNM
Towing eye, front
Towing eye, rear
Towing eye
To fit the towing eye:
A. Release the cover12 by carefully prizing
in the groove with a coin for example.
B. Screw in the towing eye properly, right
up to the flange (C). Use the wheel nut
wrench.
After use, unscrew the towing eye and refit
the cover.
The towing eye is located in the tool kit in the
cargo compartment. You must screw the
towing eye into place before towing. The
sockets and covers for the towing eye are
located on the right-hand side of each
bumper.
To screw in the rear towing eye, you must first
remove a plastic bolt from the bracket for the
rear towing eye. Use the wheel nut wrench
from the tool kit to unscrew the plastic bolt.
Refit the plastic bolt after use.
12.
The method of opening the cover may
vary.
Starting and driving
Recovery
The towing eye may only be used for towing
on roads, not for recovery after driving into a
ditch or the like. Professional help should be
called for recovery.
NNN
Starting and driving
Start assistance
Starting with a booster battery
If for some reason the battery in your car is
discharged, you can "borrow" current from a
spare battery or another car’s battery to start
the engine. Always check that the clamps are
fastened properly to prevent sparking during
the start attempt.
To avoid the risk of explosion, we recommend
you do exactly as follows.
– Turn the ignition key to position 0.
– Ensure that the booster battery has
12 volt current.
– If the booster battery is in another car,
stop the engine of that car and make sure
the cars are not touching.
NNO
– Connect the red cable between the
booster battery positive terminal (1+) and
the red connection in the engine
compartment (2+).
Attach the clamp to the contact point
located beneath a small black cover with
a plus sign which is integrated in the fuse
box cover.
– Connect one clamp of the black cable to
the negative terminal of the booster
battery (3–).
– Connect the other clamp of the black
cable to the lifting eye on your car’s
engine (4–).
– Start the engine of the "booster car". Let
the engine run a few minutes at a speed
slightly higher than idle, 1500 rpm.
– Start the engine of the car with the flat
battery.
– Remove the clamps in reverse order.
NOTE! Do not remove the clamps during the
start attempt (risk of spark build-up).
WARNING!
The battery can generate oxyhydrogen
gas, which is highly explosive. One spark,
which can be generated if you connect the
jump leads incorrectly, is sufficient to
make the battery explode.
The battery contains sulphuric acid, which
can cause serious burns. If the acid
comes into contact with eyes, skin or
clothing, flush with large quantities of
water. If acid splashes into the eyes, seek
medical attention immediately.
Starting and driving
Driving with a trailer
• The towing bracket on the car must be of
an approved type. Your Volvo dealer can
advise you as to which towing bracket to
use.
• Distribute the load on the trailer so that
the weight on the towing bracket follows
the specified maximum towball load.
• Increase tyre pressure so that it corresponds to the pressure for full load. See
the tyre pressure table!
• Clean the towing bracket regularly and
grease the towball13 and all moving parts
to prevent unnecessary wear.
• Do not drive with a heavy trailer when your
car is brand new! Wait until it has gone at
least 1000 km.
• The brakes are loaded much more than
usual on long and steep downhill slopes.
Downshift to a lower gear and adjust your
speed.
• If the car is driven with a heavy load in a
hot climate, the engine and gearbox may
overheat. The temperature gauge in the
combined instrument panel goes into the
red zone when the car overheats. Stop
and let the engine idle a few minutes.
13.
Does not apply to ball hitch with
vibration damper.
• If the car overheats, the air conditioning
system can be temporarily switched off.
• The gearbox reacts with a built-in
protection function if the car overheats.
See the message in the display!
• The engine is loaded more heavily than
usual when driving with a trailer.
• For reasons of safety, you should not drive
faster than 80 km/h, even if the laws of
certain countries permit higher speeds.
• The highest trailer weight permitted for a
trailer without brakes is 750 kg.
• If you park with a trailer, always set the
gear selector to P (automatic gearbox) or
put the car in a gear (manual gearbox). If
you park on a steep hill, put chocks under
the wheels.
• Avoid driving on inclines exceeding 12%
if the trailer weight exceeds 1200 kg. Do
not drive with a trailer at all on inclines
exceeding 15%.
WARNING!
Follow the stated recommendations for
trailer weights. Otherwise, the rig may be
difficult to control during evasive
manoeuvres and braking.
Trailer weights
See page 217 for permitted trailer weights.
NOTE! The stated maximum permitted trailer
weights are those permitted by Volvo.
National vehicle regulations can further limit
trailer weights and speeds. Towbars can be
certified for higher towing weights than the
NNP
Starting and driving
Driving with a trailer
Driving with trailer – automatic
gearbox
• When parking on hills, apply the parking
brake before moving the gear selector to
P. When starting on a hill, first put the
gear selector in drive and then release the
parking brake.
• Select a low gear in the gearbox when
driving on steep inclines or when driving
slowly. This prevents the gearbox from
upshifting if you have an automatic
gearbox. The gearbox oil will be cooler.
• If you have a Geartronic gearbox, do not
use a higher manual gear than the engine
can "handle". It is not always economical
to drive in high gears.
NOTE! Some models require an oil cooler for
the automatic gearbox when driving with a
trailer. Check with your nearest Volvo dealer
as to what applies to your car if you have a
retrofitted towbar.
NNQ
Levelling
If your car is equipped with automatic
levelling, the rear suspension always retains
the correct ride height regardless of load.
When the car is stationary, the rear
suspension sinks. This is completely normal.
When starting with a load, the level is pumped
up after a certain distance.
Starting and driving
Towing equipment
Towbars
The towball must be cleaned and greased
regularly. If a towball hitch with vibration
damper is used, it is not necessary to grease
the towball.
If the car is equipped with a detachable
towbar, the towball mounting instructions
must be followed carefully, see page 117.
NOTE! Always take off the towball section
after use. Keep it in the cargo area.
WARNING!
Be sure to attach the trailer’s safety cable
to the correct place.
WARNING!
If the car is fitted with a Volvo detachable
towbar:
Follow the assembly instructions for the
towball section carefully.
The towball section must be locked with
the key before setting off.
Check that the indicator window shows
green.
Trailer cable
An adapter is required if the car’s towbar has
13 pin electrics and the trailer has 7 pin
electrics. Use an adapter cable approved by
Volvo. Make sure the cable does not drag on
the ground.
NNR
Starting and driving
Towing equipment
A
Specifications
Distance A
Fixed towbar:1057 mm
Detachable towbar:1068 mm
Maximum towball load:75 kg
NNS
B
Distance B
Fixed towbar:73 mm
Detachable towbar:84 mm
Starting and driving
Detachable towbar
Fitting the towball
1. Remove the guard plug.
2. Ensure that the mechanism is in
the unlocked position by turning the key
clockwise.
3. Check that the indicator window (3)
shows red. If the window does not show
red, press in (1) and turn the locking wheel
anticlockwise (2) until you hear a click.
4. Insert the towball section until your hear
a click.
5. Turn the key anticlockwise to the locked
position. Remove the key from the lock.
6. Check that the indicator window shows
green.
NNT
Starting and driving
Detachable towbar
7.
8.
Removing the towball
NOTE! Check that the towball section is
secure by pulling it up, down and back. If
the towball section is not fitted correctly
then it must be removed and refitted in
NOTE! The trailer’s safety cable must be
attached to the attachment on the towbar.
1. Insert the key and turn it clockwise to the
unlocked position.
2. Push in the locking wheel and turn it
anticlockwise until you hear a click.
NNU
3. Turn the locking wheel down fully, until it
comes to a stop. Hold it in this position while
pulling the towball rearward and upward.
4. Insert the guard plug.
Starting and driving
Load on the roof
General
The load capacity is affected by extra accessories mounted on the car, such as a towbar,
the load on the towball (75 kg with trailer
hitched), load carriers and roof box, as well as
the passengers’ combined weight. The car’s
load carrying capacity is reduced by the
number of passengers and their weight.
WARNING!
The car’s driving characteristics change
depending on how heavily it is loaded and
how the load is distributed.
Using load carriers (accessory)
To avoid damaging your car and to achieve
the best level of safety when driving, we
recommend that you only use load carriers
that Volvo has specially designed for your car.
• Check periodically that the load carriers
and load are properly secured. Lash the
load securely with retaining straps.
• Distribute the load evenly over the load
carriers. Do not load lopsidedly. Place the
heaviest items at the bottom.
• Remember that the car’s centre of gravity
and driving characteristics change if you
have a load on the roof.
• Keep in mind that the car’s wind
resistance and fuel consumption increase
in proportion to the size of the load.
• Drive gently. Avoid quick accelerations,
heavy braking and taking curves hard.
• Remove the load carrier when it is not in
use. This reduces wind resistance and
fuel consumption.
WARNING!
Load no more than 100 kg on the roof,
inclusive of the load carriers or roof box.
The car’s centre of gravity and driving
characteristics are altered by roof loads.
NNV
Starting and driving
Load on the roof
– Check that the hook is properly secured
in the roof bracket.
– Tighten the knobs alternately until the
carrier feels secure.
– Replace the cover.
– Check that the roof rack is properly
secured.
– Check the knobs regularly to see that they
are properly tightened.
Fitting load carriers
– Make sure the load carrier is placed in the
right direction (see the marking on the
decal under the cover).
– Fit the guide pins into the guide holes (1).
– Carefully lower the bracket on the other
side to the roof.
– Screw the knob up a bit.
– Press the knob against the roof bracket
and catch the hook in the roof bracket
under the roof rail.
– Screw the load carrier in place.
– Fit the guide pins of the other brackets
into the guide holes.
– Screw the load carrier in place.
NOM
Starting and driving
Adjusting headlamp pattern
distance from the dot (5) to the corner of the
mask, marked with an arrow.
After copying the templates located on the
next page, check the measurements so that
the reference measurements cover enough of
the beam pattern.
A. Headlamp pattern for left-hand traffic B.
Right-hand traffic
Correct light pattern for left or
right-hand traffic
So as not to dazzle oncoming drivers, the
headlamp beam pattern can be altered by
masking the headlamps. The quality of the
beam pattern may not be as good.
Headlamp masking
Copy the templates and transfer the pattern
to a self-adhesive, waterproof material such
as opaque tape or the like.
The mask is positioned using the dot (5) in
the headlamp lens as a reference point. The
reference measurement (X) indicates the
NON
Starting and driving
Adjusting headlamp pattern
Location of halogen headlamp masks, 1 and 2 = LHD variant, 3 and 4 = RHD variant
Halogen headlamps, LHD
variant
Halogen headlamps, RHD
variant
Copy templates 1 and 2. Check the measurements to ensure they are correct. Transfer the
template to a self-adhesive, waterproof
material and cut it out.
Copy templates 3 and 4. Check the measurements to ensure they are correct. Transfer the
template to a self-adhesive, waterproof
material and cut it out.
Reference measurements:
Template 1. (3) = 70 mm, (4) = 40 mm
Reference measurements:
Template 3. (1) = 55 mm, (2) = 41 mm
Distance to dot in headlamp lens:
5=13 mm.
Distance to dot in headlamp lens:
(5) = 17 mm.
Template 2. (6) = 55 mm, (7) = 40 mm
Distance to dot in headlamp lens:
(8) = 18 mm.
Template 4. (6) = 70 mm, (7) = 39 mm
NOO
Distance to dot in headlamp lens:
(8) = 14 mm.
Starting and driving
Masking templates for halogen headlamps, LHD variant
Masking templates for halogen headlamps, RHD variant
NOP
Starting and driving
Adjusting headlamp pattern
Location of Bi-Xenon headlamp masks, 1 and 2 = LHD variant, 3 and 4 = RHD variant
Headlamp masking
Copy the templates and transfer the pattern
to a self-adhesive, waterproof material such
as opaque tape or the like.
The mask is positioned using the dot (5) in
the headlamp lens as a reference point. The
reference measurement (X) indicates the
distance from the dot (5) to the corner of the
mask.
After copying the templates located on the
next page, check the measurements so that
the reference measurements cover enough
of the beam pattern.
Bi-Xenon headlamps, RHD
variant
Bi-Xenon headlamps, LHD
variant
Copy templates 3 and 4. Check the measurements to ensure they are correct. Transfer the
template to a self-adhesive, waterproof
material and cut it out.
Copy templates 1 and 2. Check the measurements to ensure they are correct. Transfer the
template to a self-adhesive, waterproof
material and cut it out.
Reference measurements:
Template 3. (1) = 56 mm, (2) = 42 mm
Reference measurements:
Template 1. (3) = 56 mm, (4) = 43 mm
Distance to dot in headlamp lens:
(5) = 29 mm.
Distance to dot in headlamp lens:
5=29 mm.
Template 4. (6) = 56 mm, (7) = 41 mm
Template 2. (6) = 56 mm, (7) = 42 mm
NOQ
Distance to dot in headlamp lens:
(8) =6 mm.
Distance to dot in headlamp lens:
(8) = 0 mm.
Starting and driving
Masking templates for Bi-Xenon headlamps, LHD variant
Masking templates for Bi-Xenon headlamps, RHD variant
NOR
Starting and driving
BLIS (Blind Spot Information System)
the driver’s attention to a vehicle in the blind
spot.
B
WARNING!
1 – BLIS camera, 2 – Indicator lamp,
3 – BLIS symbol
BLIS
BLIS is an information system which indicates
whether there is another vehicle moving in the
same direction in the "blind spot". The system
is based on digital camera technology. The
cameras (1) are fitted under the door mirrors.
When a camera has detected a vehicle inside
the blind spot zone (up to approx. 3 metres
from the side of the car and up to approx.
9.5 metres behind the rearview mirror, see
illustration in the right-hand column) then an
indicator lamp is lit in the door panel (2). The
light comes on with a constant glow to draw
NOS
• BLIS is an information system, NOT a
warning or safety system.
• The system is a complement to, and not
a replacement for, the existing rearview
mirrors. It can never replace the
awareness and responsibility of the
driver.
• The responsibility for changing lanes
safely rests with the driver.
NOTE! The lamp comes on on the side of the
car where the system has detected the
vehicle. If the car is overtaken on both sides
at the same time then both lamps come on.
When BLIS operates
The system operates when the car is driven at
a speed between 10 km/h and 250 km/h.
When you overtake another vehicle:
• The system reacts if you overtake another
vehicle at a speed of up to 20 km/h
faster than the other vehicle.
• The system does not react if you drive at
a speed of more than 20 km/h faster
than the other vehicle.
A
"Blind spots" covered by BLIS
Distance A = approx. 9.5 m
Distance B = approx. 3 m
When you are overtaken by another
vehicle:
• The system reacts if you are overtaken by
a vehicle travelling up to 70 km/h faster
than you are travelling.
• The system does not react if you are
overtaken by a vehicle travelling more
than 70 km/h faster than you are
travelling.
Starting and driving
WARNING!
• BLIS does not work in sharp bends.
• The system does not work if the camera
lenses are covered. In this case the BLIS
indicator lamps flash and a text message is
shown in the display (see table on
page 128).
• BLIS does not work when the car is
reversing.
System function in daylight and
darkness
• Daylight: In daylight the system reacts to
the shape of the surrounding vehicles. The
system is designed to detect motor vehicles
such as cars, trucks, motorcycles etc.
WARNING!
• The system does not react to bicycles
or mopeds.
• BLIS does not react to stationary
vehicles.
Darkness: In darkness the system reacts to
the headlamps of surrounding vehicles. A
vehicle in the blind spot must at least have its
daytime running lights on to be detected by
the system. This means for example that the
system does not react to a trailer without
headlamps/daytime running lights which is
towed behind a car or truck.
Switching off and reactivating BLIS
BLIS is always active when the ignition is
switched on.
• The system can be switched off by
pressing the BLIS button in the switch
panel in the centre console (see illustration above). The LED in the button goes
out when the system is switched off and a
text message is shown in the display in
the dashboard.
• BLIS can be reactivated by pressing the
button. An LED in the button then lights
and a new text message is shown in the
display. Press the READ button, see
page 36, to clear the text message.
NOT
Starting and driving
BLIS (Blind Spot Information System)
System status
Text in the display
BLIS not functioning
BLIND-SPOT SYST SERVICE
REQUIRED
Right-hand camera
blocked
BLIND-SPOT SYST R CAMERA
BLOCKED
Left-hand camera blocked
BLIND-SPOT SYST L CAMERA
BLOCKED
Both cameras blocked
BLIND-SPOT SYST CAMERAS
BLOCKED
BLIS system off
BLIND-SPOT INFO SYSTEM OFF
BLIS system on
BLIND-SPOT INFO SYSTEM ON
WARNING!
The BLIS cameras have the same limitations as the human eye,
i.e. they "see" worse in heavy snowfall or thick fog for example.
NOTE! The messages above are only shown
if the ignition key is in position II and BLIS is
active (i.e. if the driver has not switched off the
system).
NOU
Wheels and tyres
General
Tyre pressure
Changing wheels
Warning triangle and spare wheel
Removing wheels
Emergency puncture repair
130
132
133
134
136
138
NOV
Wheels and tyres
General
Driving characteristics and tyres
The tyres greatly affect the car’s driving
characteristics. The type of tyre, dimensions,
tyre pressure and speed rating are important
for how the car performs.
When changing tyres, ensure that tyres of the
same type and dimensions, and preferably
also the same make, are fitted to all four
wheels. Follow the recommended tyre
pressures specified on the tyre pressure
label, see page 132.
Designation of dimensions
The dimensions are stated on all car tyres.
Example:
205/55R16 91 W.
205 Section width (mm)
55
Ratio between section height and
width (%)
R
Radial ply
16
Rim diameter in inches (")
91
Tyre load index (in this case 615 kg)
W
Speed rating (in this case 270 km/h).
Speed ratings
The car is approved as a whole, which means
that dimensions and speed ratings must not
differ from those specified on the vehicle’s
registration document. The only exception to
these conditions is winter tyres (both those
NPM
with metal studs and those without). If such a
tyre is chosen, the car must not be driven
faster than the speed rating of the tyre (for
example, class Q can be driven at a maximum
of 160 km/h).
Tyre age
Even if tyres have a theoretical lifespan of up
to ten years, it is not recommended to drive
on tyres which are more than six years old.
Remember that traffic regulations determine
how fast a car can be driven, not the speed
class of the tyres.
Tread wear indicators are
narrow treadless bands
across the width of the
tread. On the side of the tyre
are the letters TWI (tread
wear indicator). When only
1.6 mm of tread remains, this band is clearly
visible. Change the tyres as soon as possible.
Remember that tyres with little tread depth
provide very poor grip in rain and snow.
Note! Maximum permitted speeds indicated.
Q
T
H
V
W
160 km/h (used only on winter tyres)
190 km/h
210 km/h
240 km/h
270 km/h
New tyres
Tyres are perishable. After a
few years they begin to
harden at the same time as
the friction capacity/characteristics gradually deteriorate. Therefore aim to get
as fresh tyres as possible when you replace
them. This is especially important with regard
to winter tyres. The week and year of
manufacture are stated with four digits, for
example 1502. The tyre in the illustration was
manufactured in week 15 of 2002.
Tyres with tread wear indicators
Winter tyres
Volvo recommends winter tyres with
particular dimensions. These are stated on
the tyre pressure label, see page 132 for its
location. The tyre dimensions are dependent
on the engine variant. When driving on winter
tyres, these must be fitted to all four wheels.
NOTE! Ask a Volvo dealer which rim and tyre
types are most suitable.
Studded tyres
Studded winter tyres should be run in gently
for 500-1000 km so the studs settle properly
into the tyre. This gives the tyre, and
especially the studs, a longer lifespan.
Wheels and tyres
NOTE! The legal provisions for the use of
studded tyres vary from country to country.
Tread depth
Road conditions with ice, slush and low
temperatures place considerably higher
demands on tyres than summer conditions. It
is therefore not recommended to drive on
winter tyres that have a tread depth of less
than four millimetres.
locking wheel bolts are used in combination
with wheel covers then the locking wheel
bolts must be fitted furthest from the air valve.
Otherwise the wheel cover cannot be fitted
on the rim.
Snow chains
Snow chains may only be used on the front
wheels. This also applies to all-wheel-drive
cars.
Never drive faster than 50 km/h with snow
chains. Avoid driving on bare ground as this
wears out both the snow chains and tyres.
Never use quick-fit snow chains as the space
between the brake disks and the wheels is
too small.
Important!
Use Volvo genuine snow chains or equivalent chains designed for the car model,
and tyre and rim dimensions. Consult an
authorised Volvo workshop.
Locking wheel bolts
Locking wheel bolts can be used on both
aluminium and steel rims. If steel rims with
NPN
Wheels and tyres
Tyre pressure
Checking the tyre pressure
Check the tyre pressure regularly. The correct
tyre pressure is shown in the tyre pressure
table. The stated tyre pressures refer to cold
tyres. (Cold tyres mean the tyres are the same
temperature as the ambient temperature.)
Driving with the wrong tyre pressure adversely
affects the car’s driving characteristics and
can increase tyre wear. After just a few
kilometres of driving, the tyres warm up and
the pressure increases. Therefore air should
not be released if the pressure is checked
when the tyres are warm. However the
pressure should be increased if it is too low.
Recommended tyre pressure
The tyre pressure decal on the inside of the
fuel filler flap shows what pressure the tyres
should have with different load and speed
conditions.
NPO
Wheels and tyres
Changing wheels
adversely affected. Tyres with the greatest
tread depth should always be fitted to the rear
of the car (to decrease the risk of skidding.)
Wheels should be stored lying down or
hanging up, and not standing up.
Contact an authorised Volvo workshop if you
are uncertain about tread depth.
The arrow shows the tyre’s direction of
rotation.
Summer and winter wheels
When summer and winter wheels are
changed they should be marked with which
side of the car they were mounted on, for
example L for left and R for right. Tyres with a
tread pattern which are designed to only turn
in one direction have the direction of rotation
marked with an arrow. The tyre should always
rotate in the same direction throughout its
lifespan. Tyres should only be switched
between front and rear positions, never
between left and right-hand sides, or vice
versa. If the tyre is mounted incorrectly, the
car’s braking characteristics and capacity to
force rain, snow and slush out of the way are
NPP
Wheels and tyres
Warning triangle and spare wheel
location that is appropriate for the traffic
situation.
After use:
Pack everything in reverse order.
Make sure the warning triangle and its case
are properly secured in the boot lid.
4
3
2
1
Warning triangle (certain
countries)
Follow the warning triangle regulations of the
country you are in.
Use the warning triangle as follows:
– Turn both attachment screws to the
vertical position.
– Carefully remove the warning triangle
case.
– Remove the warning triangle from its
case (A).
– Fold out the four support legs on the
warning triangle.
– Fold out both red sides of the warning
triangle. Place the warning triangle in a
NPQ
Spare wheel, tools and jack
1. Spare wheel.
2. Mounting
3. Tool kit with towing eye
4. Jack
The spare wheel, jack and tool kit are located
under the floor of the cargo compartment.
Remove the spare wheel as follows:
– Fold the rear edge of the floor mat
forward.
– Remove the jack and tool kit.
Unscrew the spare wheel and lift it out.
Wheels and tyres
If the car is equipped with a grocery bag
holder:
– Turn the two clips located at the rear
corner of the mat 90 degrees.
– Pull the front of the floor mat back
towards the boot lid opening.
– Lift the mat slightly and turn 90 degress to
lift it out.
– Lift the mat out of the cargo compartment.
– Unscrew the spare wheel and lift it out.
Return and secure everything in reverse
order. Make sure that the spare wheel is
securely in place and that the jack and tool kit
are properly secured.
NOTE! Only use the car’s own genuine
spare wheel! Tyres with other dimensions
may cause damage to your car. Only one
spare wheel may be used at a time.
Temporary spare
The "Temporary Spare" should only be used
for the short time it takes to repair or replace
the normal tyre.
By law, it is only legal to use the spare wheel/
tyre temporarily in connection with damage to
a tyre. A wheel/tyre of this type should be
replaced with a normal wheel/tyre as soon as
possible.
Remember also that this tyre combined with
the normal tyres will affect driving characteristics. The maximum speed with the
"Temporary Spare" is therefore 80 km/h.
NPR
Wheels and tyres
Removing wheels
Removing wheels
Remember to set out the warning triangle if
you must change a wheel in a trafficked area.
The spare wheel is under the plastic trough in
the cargo compartment.
– Apply the parking brake and engage 1st
gear if the car has a manual gearbox – P if
it has automatic gearbox. Place chocks on
either side the wheels remaining on the
ground; use heavy wooden blocks or
large stones.
NPS
– Cars with steel wheel rims have
removable wheel covers. Prise off the
wheel cover with a thick screwdriver or
the like. If tools are not available, the
wheel cover can be prised off by hand.
Use protective gloves.
When refitting the wheel cover, make sure
the cover is properly aligned over the air
valve.
– Loosen the wheel bolts 1/2-1 with the
socket wrench. Loosen the nuts by
turning them anticlockwise.
– There are two jacking points on each side
of the car.
Hold the jack against the pin in the jacking
point as illustrated and crank the foot of
the jack down so it is pressed squarely on
the ground. Check that the jack sits in the
anchorage as illustrated and that the foot
is positioned vertically under the
anchorage.
– Lift the car so that the wheel is free.
Remove the wheel nuts and lift off the
wheel.
Wheels and tyres
Jack for all-wheel drive cars
Fitting the wheel
– Clean the contract surfaces on the wheel
and hub.
– Fit the wheel. Screw the wheel nuts.
– Lower the car so that the wheel cannot
rotate.
– Tighten the wheel nuts crosswise. It is
important that the wheel nuts are
tightened properly. Tighten to 140 Nm.
Check the torque with a torque spanner.
– Put on the wheel cover (steel rim).
WARNING!
Never crawl under the car when it is raised
on the jack.
Passengers must leave the car when it is
raised on the jack.
Ensure that passengers wait with the car or preferably a crash barrier - between
them and the road.
NPT
Wheels and tyres
Emergency puncture repair
General
Cars which do not have a spare wheel are
instead equipped with an emergency
puncture repair kit. This kit can be used to
both seal the puncture and to check and
adjust the tyre pressure. The kit consists of an
electric air compressor and an integrated
canister with sealing liquid.
Emergency p uncture repair kit
The emergency puncture repair kit4 is only
intended to work as a temporary repair so that
the car can be driven a further 200 km (max.)
or to the nearest tyre centre. The sealing fluid
has the ability to effectively seal tyres which
have punctures in the tread.
The canister with the sealing fluid should be
replaced before the best-before date has
expired or after the emergency repair kit has
been used. Puncture repair kit replacement,
see page 142 for information on canister
replacement.
NOTE! The emergency puncture repair kit is
only intended for sealing tyres with a puncture
in the tread.
The emergency puncture repair kit has limited
abilities to seal tyres which have punctures in
the wall of the tyre. Do not seal tyres with the
4.
NPU
Certain variants and markets
emergency puncture repair kit if they have
larger slits, cracks, irregularities or similar
damage.
The emergency puncture repair kit with
compressor and tools are found under the
floor in the cargo area.
12 V sockets for the compressor are located
by the centre console in the front, by the rear
seat and in the cargo area. Choose the
electrical socket that is nearest the punctured
tyre.
WARNING!
The sealing fluid may cause irritation if it
comes into direct contact with skin. In
the case of contact with skin, wash away
the fluid with soap and water.
Taking out the emergency
puncture repair kit
– Fold the rear edge of the floor mat
forward.
– Lift up the emergency puncture repair kit.
Wheels and tyres
Inflating tyres
Set up the warning triangle if a tyre must be
inflated in an area close to traffic.
– Ensure that the orange switch (2) is in
position 0 and take out the lead (5) and
air hose (4) from the side compartment
(3).
– Screw the air hose’s valve connection to
the bottom of the thread on the tyre’s air
valve.
– Connect the cable (5) to one of the car’s
12 V sockets.
– Start the engine. The car must be in a
well-ventilated place.
– Start the compressor by flicking the
switch (2) to position I.
– Pump up the tyre to the pressure
specified on the tyre pressure label.
– Turn off the compressor, the switch (2)
should be in position 0. Detach the air
hose and unplug the lead. Replace the
valve’s dust cap.
– Return the cable (5) and air hose (4) to
the side compartment (3).
– Put the puncture repair kit back under the
floor in the cargo area.
The compressor should not run for more than
ten minutes at a time. Let it cool afterwards as
there is a risk of overheating.
WARNING!
Inhaling car exhaust fumes can result in
danger to life. Never leave the engine
running in sealed areas or areas that lack
sufficient ventilation.
Objects with a volume of up to 50 litres can
be pumped up with the compressor.
NPV
Wheels and tyres
Emergency puncture repair
Sealing punctured tyres
Set up the warning triangle if emergency tyre
repairs must be carried out in an area where
there is other traffic.
– Remove the decal (1) regarding the
highest permitted speed from the
emergency puncture repair kit and stick it
on the steering wheel where it can be
clearly seen by the driver.
– Ensure that the orange switch (2) is in
position 0 and take out the lead (5)
and air hose (4) from the side
compartment (3).
– Screw the air hose’s valve connection to
the bottom of the thread on the tyre’s air
valve.
NQM
– Connect the lead (5) to one of the car’s
12 V sockets.
– Release the safety catch (6) and turn the
orange-coloured part (7) 90 degrees to
the vertical position, until a click is heard.
– Start the engine. The car must be in a
well-ventilated place.
WARNING!
Inhaling car exhaust fumes can result in
danger to life. Never leave the engine
running in sealed areas or areas that lack
sufficient ventilation.
– Start the compressor by flicking the
switch (2) to position I. The pressure may
increase temporarily up to a maximum of
4 bar while the sealing liquid is being
pumped in. After about one minute, the
pressure will drop and the pressure
gauge show a more correct tyre pressure.
– Pump the tyre to a pressure of between
1.8 bar and 3.5 bar. If the pressure does
not reach 1,8 bar after ten minutes of
Wheels and tyres
pumping, the compressor should be
turned off so it does not overheat.
WARNING!
Never stand next to the tyre when the
compressor is running. Be particularly
observant of the tyre walls. If cracks,
irregularities or other damage appears,
turn off the compressor immediately.
Under these circumstances your journey
should not continue. Contact an
authorised tyre centre.
– Undo the air hose (4) from the air valve
and refit the dust cap. Disconnect the
cable (5) from the electric socket. Fold
the orange-coloured part (7) back into its
original position and secure the catch (6).
Store the emergency repair kit in a safe
place in the car.
– Immediately drive about 3 km, at a
maximum speed of 80 km/h, to allow the
sealing fluid to seal the tyre well.
WARNING!
You should not drive faster than 80 km/h
after the emergency tyre repair kit has
been used. The temporarily sealed tyre
must be changed as soon as possible
(maximum driving distance: 200 km).
– Check the tyre pressure again:
NOTE! Do not raise the orange-coloured part
(7) when only the compressor is to be used
for inflation.
– Turn off the compressor, the switch (2)
should be in position 0. Detach the air
hose and unplug the lead. Replace the
valve’s dust cap.
– Return the cable (5) and air hose (4) to
the side compartment (3).
– Put the puncture repair kit back under the
floor in the cargo area.
The compressor should not run for more than
ten minutes at a time. Let it cool afterwards as
there is a risk of overheating.
NOTE! The canister with sealant and hose
should be replaced after use.
– Connect the air hose (4) to the air valve
on the tyre. Connect the lead (5) to the
12 V power point. Read the pressure on
the compressor. If the tyre pressure is
below 1.3 bar, the tyre has not been sufficiently well sealed. The journey should not
be continued under these circumstances.
Contact a tyre centre.
– If the tyre pressure is higher than 1.3 bar,
the tyre should be pumped up to the
pressure stated on the tyre pressure label,
see page 132 for its location. Release
pressure with the reduction valve (8) if the
tyre pressure is too high.
NQN
Wheels and tyres
Emergency puncture repair
Changing the sealing fluid
canister
The canister of sealing fluid should be
changed before the best-before date has
expired, see date label (1), or after the tyre
has been sealed. After use, the canister (6)
with holder (8) and air hose (10) should be
changed.
Important!
Read the safety instructions on the
bottom of the canister.
NQO
WARNING!
Ensure the compressor is not connected
to the 12 V socket when the canister is
changed.
Changing the canister before the bestbefore date has expired
– Undo the two screws (2) on the orangecoloured casing (3).
– Remove the speed label (4) and date
label (1), and open the safety catch (5).
Loosen the case (3) and take it off.
– Unscrew and remove the canister (6).
Check that the seal (7) on the new canister is
not damaged. Screw the canister into place.
– Refit the casing (3). Check that the casing
is correctly mounted, screw it on with the
screws (2).
– Put the speed decal(4) and new date
decal (1) back on the puncture repair kit.
Treat the removed canister as hazardous
waste.
Wheels and tyres
Changing the canister and hose after
use
– Undo the two screws (2) on the orangecoloured casing (3).
– Remove the speed label (4) and date
label (1), and open the safety catch (5).
Loosen the case (3) and take it off.
– Push down the button (8) while turning
the canister (6) and holder (9) clockwise.
Remove them.
– Pull out the air hose (10).
– Wipe off remaining sealing fluid with a rag
or scrape it away if it is has already dried.
– Fit a new air hose (10); check that it is
positioned correctly.
– Check that the seal (7) on the new
canister is not damaged. Screw the
holder (9) on to the canister (6) and turn it
anticlockwise until there is an audible
click.
– Refit the casing (3). Check that the casing
is correctly mounted, screw it on with the
screws (2).
– Put the speed decal(4) and new date
decal (1) back on the puncture repair kit.
The empty canister and air hose can be
treated as normal waste.
NQP
Wheels and tyres
NQQ
Car care
Cleaning
Touching up paintwork
Rustproofing
146
148
150
NQR
Car care
Cleaning
Wash the car frequently
Wash the car as soon as it becomes dirty,
especially in the winter when road salt and
moisture can lead to corrosion.
Wash the car as follows:
• Do not park the car in direct sunshine.
Washing a car with hot paintwork can
cause permanent paintwork damage.
Wash the car in a carwash with waste
water separator.
• Thoroughly rinse dirt off the underbody of
the car.
• Rinse the entire car to remove loose dirt.
When using a high-pressure washer,
make sure that its nozzle is not closer than
30 cm to the bodywork. Do not spray
directly at the locks.
• Wash with a sponge using a lot of water
with or without detergent.
• Use warm water (max. 35 °C), not water
that is too hot.
• If the dirt is ingrained, you can wash the
car with cold degreasing agent, but be
sure that there is a waste water separator
where you are washing the car. When
using cold degreasing agent, make sure
that the car is not in direct sunlight and
that the paint is not warm due to sunlight
NQS
or a warm engine. Sunlight and heat can
cause permanent damage. Consult your
Volvo workshop.
• Dry the car with a clean, soft chamois.
• Clean the wiper blades with a lukewarm
soap solution.
Suitable detergent:
Car shampoo.
Keep the following in mind:
Always remove bird droppings from the
paintwork as soon as possible. Bird
droppings contain chemicals that can affect
and discolour paintwork very quickly. Discoloration cannot be removed with polish.
Important!
Sharp objects and Velcro may damage
the fabric upholstery.
WARNING!
Do not wash the engine while it is warm.
Risk of fire! Entrust engine washing to an
authorised Volvo workshop.
Automatic carwashes
An automatic car wash is a simple and quick
way of washing the car. Bear in mind,
however, that an automatic car wash can
never replace a proper handwashing – the
brushes of a car wash cannot reach everywhere. During the first months of the car’s life
we recommend that you handwash the car.
WARNING!
After washing: always test the brakes so
that moisture and corrosion do not affect
the brake lining and impair the brakes!
Lightly depress the brake pedal now and
then when driving long distances in rain or
slush so that the brake lining warms and
dries. You should also do this when you
begin driving after damp or cold weather.
Car care
Cleaning the upholstery
Treating spots on fabric
A special cleaning agent, available from your
Volvo dealer, is recommended for cleaning
the fabric upholstery. Other chemicals can
impair the fire retardant qualities of the upholstery.
Important!
Sharp objects and Velcro may damage
the fabric upholstery.
Treating spots on vinyl and plastic parts
A special cleaning agent, available from your
Volvo dealer, is recommended for cleaning
interior vinyl and plastic parts. Do not scrape
or rub spots. Do not use strong stain
removers.
Treating spots on leather
A special cleaning agent, available from your
Volvo dealer, is recommended when cleaning
leather upholstery. Treat the leather upholstery once or twice a year using Volvo’s
leather care kit. Never use strong solvents.
Such products may damage fabric, vinyl and
leather upholstery.
Cleaning seatbelts
Use water and a synthetic detergent. A
special textile cleaning agent is available from
you Volvo dealer. Make sure the seatbelt is
dry before allowing it to retract.
Take care when cleaning so as not to damage
the glass surface.
Polishing and waxing
To avoid damaging glass surfaces when
removing ice, only use plastic ice scrapers.
Polish and wax the car when you feel the
paintwork is matte and when you wish to give
the paintwork extra protection, such as before
winter.
The car does not usually need polishing until
after one year. It can be waxed earlier.
Wash and dry the car thoroughly before you
begin polishing and/or waxing. Clean of
asphalt and tar stains with white spirit. More
stubborn marks can be removed with fine
rubbing paste designed for paintwork. Polish
first with a polish and then wax with fluid or
solid wax. Carefully follow the instructions on
the package. Many preparations contain both
polish and wax.
There is natural wear of the water-repellent
coating.
NOTE! Treatment with a special finishing
agent available from Volvo dealers is recommended in order to maintain the waterrepellent properties. This should be used first
after three years and then each year.
Do not polish or wax surfaces warmer than
45 °C.
Cleaning door mirrors and front
door windows with waterrepellent coating (option)
Never use products such as car wax,
degreaser or the like on mirror/ glass surfaces
as this could ruin their water-repelling
properties.
NQT
Car care
Touching up paintwork
Paintwork
Paint is an important part of the car’s
rustproofing and should therefore be
checked regularly. Repair paintwork damage
immediately so that it does not start to rust.
The most common types of paintwork
damage that you can repair yourself are:
• minor stone chips and scratches
• damage to wing edges and doors
When repairing paintwork, the car should be
clean and dry with a temperature above
+15 °C.
Colour code
Make sure you have the right colour. The
colour code number is on the data plate in the
engine compartment.
NQU
Remove any paint residue with tape Mask if
necessary
Minor stone chips and scratches
Material:
•
•
•
•
•
Primer in a can
Paint in a can or a touch-up pen
Brush
Masking tape
If the stone chip has not gone down to the
bare metal and an unpainted colour coat
remains, you can add paint immediately
after removing dirt.
Car care
Do as follows if the stone chip went
down to the bare metal:
– Fasten a piece of masking tape over the
damaged surface. Then remove the tape,
removing any paint residue (illustration 1).
– Stir the primer thoroughly and apply using
a fine brush or matchstick (illustration 2).
– When the primer is dry, apply the surface
coat with a brush.
– Make sure the paint is well stirred and
apply several thin coats; allowing it to dry
between coats.
– The procedure is the same for scratches,
but masking tape can be used to protect
undamaged paintwork (illustration 3).
– Wait a day or so and then finish the repair
by polishing. Use a soft rag and apply
lapping paste sparingly.
NQV
Car care
Rustproofing
Rustproofing – check and repair
Your car received a thorough and complete
rustproofing at the factory. Parts of the body
are made of galvanised sheet metal. The
underbody is protected by a wear-resistant
anti-corrosion compound. Members, cavities
and enclosed sections are sprayed with a
thin, penetrating rust inhibitor.
The car’s rustproofing is maintained by doing
the following:
• Keep the car clean! Hose down the
underbody.
During high pressure washing - hold the
nozzle at least 30 cm from painted
surfaces!
• Check and repair the rustproofing
regularly.
The car’s rustproofing does not normally
require treatment for approximately 8 years.
After that time, it should be treated at three
year intervals. If your car requires treatment,
consult your Volvo workshop.
Repair
If you want to repair the rustproofing yourself,
make sure the area is clean and dry. Hose
down, wash and dry the car thoroughly. Use a
rustproofing agent in a spray can or one that
is intended for brush application.
NRM
There are two different types of rustproofing
agents:
• thin (colourless), for visible areas
• thick, for areas prone to wear on the
underbody.
Possible repair areas with these agents:
• Visible welds and sheet metal joints - thin
fluid
• Underbody - thick fluid
• Door hinges - thin fluid
• Bonnet hinges and catch - thin fluid
Once you have finished treatment, excess
rustproofing can be wiped off with a rag
dipped in a recommended cleaning agent.
Parts of the engine and suspension strut
mountings in the engine compartment are
treated at the factory with a wax-based,
colourless rustproofing. This withstands
normal detergents without dissolving and
losing its rustproofing ability.
If you wash the engine using aromatic
solvents, such as turpentine or white spirit
(especially those that do not contain emulsifiers), the protective wax should be renewed
after washing. Your Volvo dealer handles
such waxes.
Maintenance and service
Volvo service
Self-maintenance
Bonnet and engine compartment
Diesel
Oils and fluids
Wiper blades
Battery
Replacing bulbs
Fuses
152
153
155
156
157
160
161
163
171
NRN
Maintenance and service
Volvo service
Volvo service programme
Installing accessories
Before the car left the factory, it was
thoroughly test driven. It was checked again
in accordance with Volvo Car Corporation
regulations before it was handed over to you.
The incorrect connection and installation of
accessories can negatively affect the car’s
electrical system. Certain accessories only
function when the appropriate software has
been programmed into the car’s electrical
system. Always contact an authorised Volvo
workshop before installing accessories which
are connected to or affect the electrical
system.
To keep your Volvo as safe and reliable as
possible, follow the Volvo service programme
specified in the Service and Warranty
Booklet. Have an authorised Volvo workshop
carry out service and maintenance work.
Volvo workshops have the personnel, special
tools and service literature to guarantee the
highest quality of service.
Important!
For the Volvo warranty to apply, check
and follow the instructions in the Service
and Warranty Booklet.
Special service measures
Certain service measures, which affect the
car’s electrical system, can only be performed
using electronic equipment specially
developed for your car. Always contact an
authorised Volvo workshop before beginning
or performing service work that affects the
electrical system.
NRO
Recording vehicle data
One or more of the computers in your Volvo
are capable of recording detailed information.
This information is intended for use in
research to enhance safety and for
diagnosing faults in some of the in-car
systems. The data may include details
regarding seatbelt use by the driver and
passengers, the functions of various vehicle
systems and modules, and status information
about the engine, throttle, steering, brakes
and other systems. This data can also include
details of the way the car is driven. This type
of information can include, without being
limited to, specific details such as vehicle
speed, the use of the brake and accelerator
pedals and steering wheel position. This latter
type of data can be stored for a limited period
while the car is being driven and subsequently during a collision or a near-collision.
Volvo Car Corporation will not disclose the
stored information without consent. However,
Volvo Car Corporation may be forced to
disclose the information due to national legislation. Volvo Car Corporation and its
workshops may also read and use the information.
Adverse driving conditions
Change the engine oil and replace the air and
oil filters more often than recommended in the
Service and Warranty Booklet when driving in
adverse conditions.
Adverse driving conditions include extended
periods of driving:
•
•
•
•
•
•
in a dusty or sandy environment.
towing a caravan or trailer.
in mountainous regions.
at high speeds.
at low speeds or idling.
short journeys (less than 10 km) at low
temperatures (below 5 ºC).
Maintenance and service
Self-maintenance
Note the following before you
begin working on your car:
WARNING!
Battery
Ensure that the battery cables are correctly
connected and tightened.
Never disconnect the battery when the
engine is running (e.g. when replacing the
battery).
Never use a fast charger to charge the
battery. The battery cables should be disconnected when recharging.
The battery contains acid that is both
corrosive and toxic. Handle the battery in an
environmentally-suitable way. Let your Volvo
dealer assist you.
Lifting the car
If the car is lifted with a workshop jack, it
should sit with the front edge on the engine
support arm. Do not damage the splashguard
under the engine. Ensure that the jack is
positioned so that the car cannot slide off the
jack. Always use axle stands or the like.
If you lift the car using a two pillar workshop
lift, ensure that the front and rear lift arms are
fixed under the lifting points on the door sill.
See the illustration.
The car ignition system has very high
voltage!
The voltage in the ignition system is
dangerous!
Do not touch spark plugs, ignition cables
or the ignition coil when the engine is
running or the ignition is switched on!
The ignition should be switched off when:
• Conducting engine tests.
• Replacing parts in the ignition system,
such as spark plugs, ignition coil,
distributor, ignition cables, etc.
WARNING!
Never try to repair any part of the SRS or
SIPS bag systems yourself. Any interference in the system could cause
malfunction and serious injury. Any work
should only be performed by an
authorised Volvo workshop.
NRP
Maintenance and service
Self-maintenance
Check regularly
Check the following at regular intervals, for
example, when refuelling:
• Coolant – The level must be between the
MIN and MAX marks on the expansion
tank.
• Engine oil – The level must be between
the MIN and MAX marks.
• Power steering fluid – The level must be
between the MIN and MAX marks.
• Washer fluid – The reservoir should be
well filled. Use washer antifreeze at
temperatures around freezing.
• Brake and clutch fluid – The level must be
between the MIN and MAX marks.
WARNING!
• Bear in mind that the radiator fan may
start automatically some time after the
engine has been switched off.
• Always have the engine cleaned by a
workshop. There is a risk of fire if the
engine is hot.
NRQ
Maintenance and service
Bonnet and engine compartment
Left and right-hand drive cars.
Opening the bonnet
Engine compartment
To open the bonnet:
1.
2.
3.
4.
5.
6.
7.
8.
– Pull the handle on the far left under the
dashboard. You will hear when the catch
releases.
– Insert your hand under the centre of the
front edge of the bonnet and press up the
safety catch.
– Open the bonnet.
WARNING!
Check that the bonnet locks properly
when closed.
Expansion tank, cooling system
Power steering fluid reservoir.
Washer fluid reservoir
Engine oil dipstick
Radiator
Radiator fan
Engine oil filler pipe
a) Clutch/brake fluid reservoir
(left-hand drive car).
b) Clutch/brake fluid reservoir
(right-hand drive car).
9. Relay/fuse box
10. Air filter
11. Battery (in cargo compartment)
NRR
Maintenance and service
Diesel
Fuel system
Diesel engines are sensitive to contaminants.
Only use diesel from a well-known oil
company. Never fill up with diesel if the quality
is dubious. The large oil companies also
produce a special winter-grade diesel for
temperatures around freezing. This fuel is less
viscous at low temperatures and reduces the
risk of wax forming in the fuel system.
The risk of condensation in the fuel tank is
reduced if the tank is kept well filled. When
refuelling, check that the area around the fuel
filler pipe is clean. Avoid spilling fuel onto the
paintwork. Wash off any spillage with
detergent and water.
Empty tank
No special procedures are required if the tank
runs dry.
RME (Rape methyl ester)
A maximum of 5 % RME may be mixed with
the diesel.
Important!
There is a risk of engine damage if the
RME concentration is greater than 5 %.
NRS
Draining condensation from the
fuel filter
The fuel filter separates condensation from
the fuel. Condensation can disrupt engine
operation.
The fuel filter must be drained at the intervals
specified in the Service and Warranty Booklet
or if you suspect that the car has been filled
with contaminated fuel.
Maintenance and service
Oils and fluids
Checking and changing the
engine oil and oil filter
The Service and Warranty Booklet specifies
suitable intervals for changing the oil and oil
filter. Shorter intervals are recommended if
driving in adverse conditions. See page 152.
Check the level of engine oil and change the
oil regularly.
Checking the oil level in a new car is
especially important before the first
scheduled oil change. The Service and
Warranty Booklet specifies the odometer
readings for oil changes.
Volvo recommends checking the oil level
every 2500 km. The most accurate measurements are made on a cold engine before
starting. The measurement will be inaccurate
if taken immediately after the engine is
switched off. The dipstick will indicate that the
level is too low because the oil has not had
time to flow down into the oil sump.
NOTE! See the recommended oil grade,
viscosity and capacities on page 220.
Certain engine variants have an oil level
sensor, see page 220.
The oil level must be within the area marked
on the dipstick
Important!
Always use oil of the recommended grade
and correct viscosity.
Never use oil additives. These can damage
the engine. If the system is topped up with
a different oil, contact the nearest
authorised Volvo workshop for servicing.
Checking the oil in a cold engine:
– Wipe the dipstick clean before checking
the level.
– Check the oil level using the dipstick. The
oil level must be between the MIN and
MAX marks.
– If the level is close to the MIN mark, start
by topping up with 0.5 litres of oil. Top up
until the oil level is nearer the MAX than
the MIN mark on the dipstick. See
page 220 for capacities.
Checking the oil in a warm engine:
– Park the car on a level surface, switch off
the engine and wait 10-15 minutes to
allow the oil time to run back to the sump.
– Wipe the dipstick clean before checking
the level.
– Check the oil level using the dipstick. The
oil level must be between the MIN and
MAX marks.
– If the level is close to the MIN mark, start
by topping up with 0.5 litres of oil. Top up
until the oil level is nearer the MAX than
the MIN mark on the dipstick. See
page 220 for capacities.
Important!
Never fill above the MAX mark. Oil
consumption may increase if too much oil
is poured into the engine.
WARNING!
Do not spill oil onto the hot exhaust
manifold due to the risk of fire.
NRT
Maintenance and service
Oils and fluids
Important!
Always use coolant with anti-corrosion
agent as recommended by Volvo. New
cars are filled with coolant that can
withstand temperatures down to approximately -35 °C.
Important!
Coolant reservoir
Coolant
Washer fluid reservoir
Washer fluid reservoir
The windscreen and headlamp washers have
the same reservoir. See capacities and
recommended grade for fluids on page 223
Use washer fluid during the winter so that the
fluid does not freeze in the pump, reservoir
and hoses.
Tip: clean the wiper blades when topping up
washer fluid.
NRU
Check the coolant regularly.
The level should lie between the MIN and
MAX marks on the expansion tank. Top up
with fluid when the level has fallen to the MIN
mark.
See capacities and recommended grade for
fluids and oils on page 223.
When topping up the coolant, follow the
instructions on the packaging. It is important
that the mixture of coolant concentrate and
water is correct for the prevailing weather
conditions. Never top up with water only. The
risk of freezing increases with both too little
and too much coolant concentrate.
The engine must only be run with a wellfilled cooling system. High temperatures
can occur, causing a risk of damage
(cracks) to the cylinder head.
WARNING!
The coolant may be very hot. If the coolant
requires topping up when the engine is at
operating temperature, unscrew the
expansion tank cap slowly to gently
release the overpressure.
Maintenance and service
WARNING!
If the level of brake fluid in the reservoir is
below the MIN mark, the car should not be
driven until the brake fluid has been
topped up.
The reason for the loss of brake fluid must
be investigated.
Clutch and brake fluid reservoir
Power steering fluid reservoir
Clutch and brake fluid reservoir
Power steering fluid reservoir
The brake and clutch fluid have a common
reservoir4. The fluid level must be between
the MIN and MAX marks. Check the level
regularly. Change the brake fluid every other
year or at every other regular service.
Check the level at every service. It is not
necessary to change the fluid. The level
should lie between the ADD and FULL marks.
See capacities and recommended grade for
fluids and oils on page 223.
NOTE! The fluid should be changed annually
on cars driven in conditions requiring hard,
frequent braking, such as driving in mountains
or tropical climates with high humidity.
4.
See capacities and recommended grade for
fluids and oils on page 223.
NOTE! It is possible to steer if a fault should
occur in the power steering system or if the
car loses electrical power and requires
towing. Bear in mind that steering will be
more difficult than normal and more force will
be required to turn the steering wheel.
Location dependent on whether car is
left or right-hand drive.
NRV
Maintenance and service
Wiper blades
Replacing windscreen wiper
blades
– Fold out the wiper arm and grasp the
wiper blade.
– Press in the ribbed spring catch on the
wiper blade while lifting it off at the arm
extension.
– Fit the new blade in reverse order and
check that it is properly secured.
NOTE! Bear in mind that the wiper blade on
the driver’s side is longer than the one on the
passenger side.
Replacingheadlamp wiper
blades5
– Fold the wiper arm forward.
– Pull the wiper blade outward.
– Press the new blade in place.
Check that the blade is properly secured.
5.
NSM
Applies to S60 R.
Maintenance and service
Battery
NOTE! Never fill above the maximum
mark (A).
The battery contains
corrosive acid.
Important!
Always use distilled or deionised water
(battery water).
• Tighten the caps properly.
NOTE! The life of the battery is shortened if
it becomes discharged repeatedly.
Symbols on the battery
Avoid sparks and naked
flames.
Risk of explosion.
These symbols displayed on the battery.
Battery care
The service life and function of the battery is
influenced by factors such as the number of
starts, discharging, driving style, driving
conditions and climatic conditions.
For the battery to function satisfactorily,
consider the following:
• Regularly check that the battery fluid level
is correct (A).
• Check all cells. Use a screwdriver to
remove the caps. Each cell has its own
maximum level mark.
• If necessary, top up with distilled water to
the battery’s maximum mark.
Use protective goggles
Further information in the
owner’s manual.
Store the battery out of the
reach of children.
NSN
Maintenance and service
Battery
1
2
1. Battery without cover 2. Battery with cover
Changing the battery
Removing the battery:
– Switch off the ignition and remove the key.
– Wait at least 5 minutes before touching
any electrical terminals. This allows time
for the information in the car’s electrical
system to be stored in the control
modules.
– Undo the screws from the lock brace over
the battery and remove the brace.
– Bend up the plastic cover over the
negative battery terminal or unscrew the
cover from the battery.
– Disconnect the negative battery lead.
NSO
– Detach the lower console holding the
battery.
– Bend aside the plastic cover and
disconnect the positive cable.
– Remove the battery.
Fitting the battery:
– Fit the battery into position.
– Position the lower console and screw it in
place.
– Connect the positive cable, press in and
fold down the plastic cover.
– Connect the negative cable, fold down
the plastic cover.
– Fit the plastic cover or the cover over the
battery.
– Make sure the evacuation hose is
correctly connected to both the battery
and the outlet in the bodywork.
– Fit the lock brace over the battery and
tighten the screws.
WARNING!
Batteries can generate oxyhydrogen gas,
which is highly explosive. A spark, which
can be generated if you connect the jump
leads incorrectly, is sufficient to make the
battery explode. The battery also contains
sulphuric acid, which can cause serious
burns. If the acid comes into contact with
eyes, skin or clothing, flush with large
quantities of water. If acid splashes into
the eyes, seek medical advice immediately.
Maintenance and service
Replacing bulbs
General
All bulb specifications are given on
page 228.
The following list contains bulbs and pointsource lamps that are specialised or
unsuitable for changing except at a
workshop:
•
•
•
•
•
•
•
General interior lighting in the roof.
Reading lamps
Glovebox lighting
Direction indicators in the door mirrors.
Approach lighting in the door mirrors.
High-level brake light.
LEDs in the rear lamp cluster.
Important!
Never touch the bulbs’ glass with your
fingers. Grease and oils from your fingers
are vaporised by the heat, coating and
damaging the reflector.
Changing front bulbs
All front bulbs (except for fog lamps) are
changed by first removing the lamp housing
from the engine compartment.
WARNING!
On cars with Bi-Xenon headlamps, all
work on the lights should be carried out at
an authorised Volvo workshop.
Bi-Xenon headlamps must be handled
with extreme care due to the high-voltage
unit.
Location of the bulbs in the
headlamp6
1. Side marker lamp
2. Direction indicator
3. Dipped beam, position lamp
4. Main beam bulb
On certain variants, a white plastic sleeve may
impede bulb replacement. This can be
broken off and discarded.
6.
Applies to halogen headlamps
NSP
Maintenance and service
Replacing bulbs
Dipped beam bulb
Fitting the dipped beam bulb
Main beam bulb
Dipped beam
To fit:
– Fit the new bulb. In can only be positioned
one way.
– Press the clamp spring upwards and a
little to the left so that it secures in its
catch.
– Plug in the connector.
– Refit the cover.
Main beam
To remove the bulb:
– Switch off all lights and turn the ignition
key to position 0.
– Remove the cover.
– Unplug the connector.
– Disconnect the spring clamp. First push
to the right so that the spring disconnects
and then out and down.
– Pull out and remove the bulb.
NSQ
To remove the bulb:
– Switch off all lights and turn the ignition
key to position 0.
– Remove the cover.
– Pull out the lamp.
– Unplug the connector.
– Turn the lamp anticlockwise a half turn,
pull out and remove the bulb.
Maintenance and service
To fit:
– Fit the new bulb. In can only be positioned
one way.
– Plug in the connector.
– Put the lamp back in place and turn it so
that the connector faces down.
– Refit the cover.
Position and parking lamp bulb
Direction indicator bulb, left-hand side
Position/parking lamps
Direction indicator, left-hand
side
To remove the bulb:
– Switch off all lights and turn the ignition
key to position 0.
– Remove the cover (same cover as for
dipped beam).
– Pull out the lamp.
– Unplug the connector.
To fit:
– Fit the new bulb.
– Plug in the connector.
– Refit the cover.
To remove the bulb:
– Switch off all lights and turn the ignition
key to position 0.
– Twist the bulb holder anticlockwise and
remove it.
– Press the bulb inwards, turn it
anticlockwise and remove it from the bulb
holder.
To fit:
– Fit the new bulb by pressing in and
turning clockwise.
– Refit the bulb holder in the lamp housing
and turn it clockwise.
NSR
Maintenance and service
Replacing bulbs
– Refit the ventilation hose onto the filler
pipe (4).
– Screw in the screw (2) to the filler pipe
and refit the radiator hose to the
radiator (1).
Direction indicator bulb, right-hand side
Side marker lamp
Direction indicator, right-hand
side
Side marker lamps
– Switch off all lights and turn the ignition
key to position 0.
– Remove the radiator hose (1) from the
radiator.
– Remove the screw (2) to the filler pipe.
– Pull the pipe (3) straight up.
– Remove the ventilation hose (4) from the
pipe.
– Replace the bulb.
– Check that the washer fluid reservoir
gasket between the filler pipe and the
holder is properly secured.
– Put the filler pipe (3) back into place.
NSS
– Turn the bulb holder clockwise and pull it
out.
– Replace the bulb.
– Refit the bulb holder by turning it
anticlockwise.
Maintenance and service
– Refit the lamp with lens in the front wing.
Press it straight inward.
Fog lamp
Side direction indicator
Front fog lamps (option)
Side direction indicators
To remove the bulb:
– Switch off all lights and turn the ignition
key to position 0.
– Turn the bulb holder slightly
anticlockwise.
– Pull out and remove the bulb.
To fit:
– Fit the new bulb. In can only be positioned
one way.
– Refit the bulb holder, turn it clockwise
slightly. The "TOP" mark must be upward.
To remove the bulb:
– Open the front door halfway.
– Slide your hand behind the front wing and
press out the lamp together with lamp
housing. Do not disconnect the leads.
– Turn the bulb holder a quarter turn
clockwise and pull it straight out of the
lamp housing.
– Detach the bulb from the connector by
pulling it straight out.
To fit:
– Connect the new bulb to the connector
and fit it in the lamp housing by turning it a
quarter turn clockwise.
NST
Maintenance and service
Replacing bulbs
Position of rear bulb holder
Replacing rear bulbs
Bulbs in the rear lamp cluster
General
All bulbs in the rear lamp cluster can be
replaced from inside the cargo compartment.
– Switch off all lights and turn the ignition
key to position 0.
– Unlock and fold down the side panel to
access the bulbs.
The bulbs are located in two separate bulb
holders, an upper and a lower. Each bulb
holder has a locking pin.
Bulb specifications can be found on
page 228.
Location of bulbs
1. Brake light
2. Position/parking lamps
3. Rear fog lamp (one side)
4. Side marker lamps
5. Direction indicators
6. Reversing lamp
NSU
To replace the bulb:
– Detach the connector from the bulb
holder.
– Press the catches together and pull out
the holder.
– Remove the bulb.
– Fit the new bulb in the holder.
– Plug in the connector.
– Close and secure the side panel.
NOTE! If the error message "LAMP FAULT"/
"CHECK BRAKE LIGHT" remains after a
faulty bulb has been replaced then an
authorised Volvo workshop needs to be
consulted to rectify the fault.
Maintenance and service
Number plate lighting
Courtesy lighting
Cargo area
Number plate lighting
Courtesy lighting
Cargo area
– Switch off all lights and turn the ignition
key to position 0.
– Remove the screw with a screwdriver.
– Carefully remove the entire lamp housing
and pull it out. Turn the contact
anticlockwise and pull out the bulb.
– Fit the new bulb.
– Plug in the connector and turn it
clockwise in the lamp housing.
– Refit the entire lamp housing and screw it
into place.
There is courtesy lighting under the
dashboard on the driver and passenger
sides.
– Insert a screwdriver and gently turn so
that the lamp housing comes loose.
– Remove the bulb.
– Fit a new bulb.
– Refit the lamp housing.
– Insert a screwdriver and gently turn so
that the lamp housing comes loose.
– Remove the bulb.
– Fit a new bulb.
– Refit the lamp housing.
NSV
Maintenance and service
Replacing bulbs
Vanity mirror, different versions
Vanity mirror lighting
– Insert a screwdriver and turn so that the
lamp lens releases.
– Remove the bulb.
– Fit a new bulb.
– First press the bottom of the lamp glass
back into place above the four hooks.
Then press the top in place.
NTM
Maintenance and service
Fuses
Fuses
All electrical functions and components are fused to protect your car’s
electrical system from damage by short circuiting and overloading.
Fuses are housed in four different locations in the car:
1.
2.
Relay/fuse box in the engine compartment.
Fuse box in the passenger compartment within the sound barrier
on the driver’s side.
3. Fuse box in the passenger compartment at dashboard end on
driver’s side.
4. Fuse box in cargo compartment.
Changing
If an electrical component or function does not work, this may be
because the component’s fuse was temporarily overloaded and blew.
– Pull out the fuse and check from the side to see whether the
curved wire has blown.
– If this is the case, replace it with a new fuse of the same colour and
amperage.
There are a number of spare fuses in the cover on the end of the
dashboard. There are also pliers which facilitate the removal and fitting
of fuses.
If the same fuse blows repeatedly, there is a fault in the component.
Contact an authorised Volvo workshop to have it checked.
– Look in the fuse diagram to locate the fuse.
NTN
Maintenance and service
Fuses
8.
^
A. Press in the plastic catches on the rear of the box and pull the
cover upward.
Relay/Fuse box in the engine compartment
1.
2.
3.
4.
5.
6.
7.
NTO
Parking heater (option) ............................................................... 25 A
Auxiliary lamps (option)............................................................... 20 A
Throttle (5-cyl. without turbo/Bi-fuel) ..................................... 10 A
Oxygen sensors (petrol), Engine Control Module (ECM)
(diesel), high-pressure valve (diesel) ....................................... 20 A
Crankcase ventilation heater, solenoid valves
Fuel distributor (Bi-Fuel)............................................................. 10 A
Mass air flow sensor, engine control module,
injectors (petrol) ........................................................................... 15 A
mass air flow sensor (diesel)..................................................... 10 A
- ................................................................................................................ -
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
Accelerator pedal sensor (APM), AC compressor,
fan electronics box ...................................................................... 10 A
Gas tank valve (Bi-fuel LPG) ................................................... 10 A
-................................................................................................................ Ignition coils (petrol), relay coils............................................... 20 A
-................................................................................................................ Windscreen wipers ..................................................................... 25 A
ABS ............................................................................................... 30 A
High-pressure washer, headlamps ........................................ 35 A
-................................................................................................................ Dipped beam (left) ..................................................................... 20 A
Parking lamps (front) ................................................................. 15 A
ABS ............................................................................................... 30 A
Dipped beam (right) ................................................................... 20 A
Fuel pump .................................................................................... 15 A
Starter motor................................................................................. 35 A
Engine Control Module (ECM) supply, engine relay
(ECR) coil...................................................................................... 10 A
-................................................................................................................ -
Maintenance and service
9.
OBDII, light switch (LSM), Steering Angle Sensor (SAS),
Steering Wheel Module (SWM) ................................................. 5 A
10. Audio .............................................................................................. 20 A
11. Amplifier ........................................................................................ 30 A
12. RTI display..................................................................................... 10 A
13. Telephone ......................................................................................... 5 A
14-38 --
Fuses in the passenger compartment at
dashboard end on driver’s side
1.
2.
3.
4.
5.
6.
7.
8.
Power driver’s seat ...................................................................... 25 A
Power passenger seat................................................................ 25 A
Climate control system fan ........................................................ 30 A
Control module, right front door ............................................... 25 A
Control module, left front door.................................................. 25 A
General lighting, ceiling (RCM),
Upper Electronic Module (UEM).............................................. 10 A
Sunroof........................................................................................... 15 A
Ignition switch, SRS system, Engine Control
Module (ECM), SRS deactivation passenger
side (PACOS), immobiliser (IMMO)....................................... 7,5 A
NTP
Maintenance and service
Fuses
Fuses in the passenger compartment within the
sound barrier on the driver’s side
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
NTQ
Seat heating, right side............................................................... 15 A
Seat heating, left side ................................................................. 15 A
Horn ................................................................................................ 15 A
- ................................................................................................................ - ................................................................................................................ Reserve .................................................................................................. Reserve .................................................................................................. Siren...................................................................................................5 A
Brake lamp switch feed .................................................................5 A
Combined instrument panel (DIM), climate control (CCM),
parking heater, power driver’s seat.......................................... 10 A
Front and rear seat socket ......................................................... 15 A
- ................................................................................................................ Reserve .................................................................................................. Headlamp wipers (S60 R) ......................................................... 15 A
ABS, STC/DSTC ............................................................................5 A
16. Bi-fuel, Electronically Controlled Power Steering (ECPS),
Bi-Xenon, headlamp levelling .................................................... 10 A
17. Fog lamp, front left ..................................................................... 7,5 A
18. Fog lamp, front right................................................................... 7,5 A
19. Reserve .................................................................................................. 20. Reserve .................................................................................................. 21. Transmission Control Module (TCM),
reverse gear inhibitor (M66)...................................................... 10 A
22. Main beam, left ............................................................................. 10 A
23. Main beam, right .......................................................................... 10 A
24. -................................................................................................................ 25. -................................................................................................................ 26. Reserve .................................................................................................. 27. Reserve .................................................................................................. 28. Power passenger seat, audio ...................................................... 5 A
29. Reserve .................................................................................................. 30. BLIS................................................................................................... 5 A
31. Reserve .................................................................................................. 32. Reserve .................................................................................................. 33. Vacuum pump............................................................................... 20 A
34. Washer pump, headlamp wipers (S60 R) ............................. 15 A
35. -................................................................................................................ 36. -................................................................................................................ -
Maintenance and service
Fuses in the cargo compartment
1.
2.
3.
Reversing lamp............................................................................. 10 A
Parking lamps, fog lamps, cargo compartment lighting,
number plate lighting, LEDs in brake lighting........................ 15 A
Accessories (AEM)...................................................................... 20 A
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
Reserve .................................................................................................. REM electronics .......................................................................... 10 A
CD changer, TV, RTI .................................................................. 7,5 A
Towing bracket wiring (30-feed) .............................................. 15 A
Cargo compartment socket....................................................... 15 A
Rear right door: power window, power window lock.......... 20 A
Rear left door: power window, power window lock ............ 20 A
Reserve .................................................................................................. Reserve .................................................................................................. Diesel filter heater........................................................................ 15 A
-................................................................................................................ Reserve .................................................................................................. Reserve .................................................................................................. Audio accessories .......................................................................... 5 A
Reserve .................................................................................................. Foldable head restraint............................................................... 15 A
Towing bracket wiring (15-feed) .............................................. 20 A
Reserve .................................................................................................. -................................................................................................................ AWD ............................................................................................. 7,5 A
Four-C SUM ................................................................................. 15 A
-................................................................................................................ Parking assistance ......................................................................... 5 A
Main fuse: towing bracket wiring, Four-C,
parking assistance, AWD .......................................................... 30 A
28. Central locking system (PCL)................................................... 15 A
29. Trailer lighting, left: parking lamp, direction indicator .......... 25 A
NTR
Maintenance and service
Fuses
30. Trailer lighting, right: brake lamp, rear fog lamp,
direction indicator ........................................................................ 25 A
31. Main fuse: Fuse 37, 38............................................................... 40 A
32. - ................................................................................................................ 33. - ................................................................................................................ 34. - ................................................................................................................ 35. - ................................................................................................................ 36. - ................................................................................................................ 37. Heated rear window.................................................................... 20 A
38. Heated rear window.................................................................... 20 A
NTS
Audio (option)
Overview HU-450
Overview HU-650
Overview HU-850
Audio functions HU-450/650/850
Audio functions HU-450
Audio functions HU-650/850
Radio functions HU-450/650/850
Radio functions HU-450
Radio functions HU-650/850
Radio functions HU-450/650/850
Cassette player HU-450
CD player HU-650
Internal CD changer HU-850
External CD changer HU-450/650/850
Dolby Surround Pro Logic II HU-850
Technical data
178
179
180
181
182
183
184
185
186
187
192
193
194
195
196
197
NTT
Audio (option)
Overview HU-450
1.
2.
3.
4.
5.
6.
NTU
POWER (On/Off) – Press Volume –
Turn
PRESET/ CD PUSH MENU–
Stored radio stations
CD changer (option)
SOURCE PUSH MENU–
Open main menu – Press
Turn to select:
Radio – FM, AM
Cassette
CD changer (option)
FADER – Press out and turn
BALANCE – Press out, pull and turn
SCAN – Automatic station search
EXIT – Scroll back in the menu
7.
Navigation buttons –
CD/radio – seek/change station or track
Cassette – Fast forward/rewind /select
next/previous track
8. Display
9. FM – Shortcut between FM1, FM2, FM3
10. AM – Shortcut between AM1, AM2
11. TAPE – Shortcut
12. AUTO – Automatic station preset
13. BASS – Press out and turn
TREBLE – Press out, pull and turn
14. Cassette – direction select –
CD changer (option) – Random
15. Cassette opening
16. Cassette eject
Audio (option)
Overview HU-650
1.
2.
3.
4.
5.
6.
7.
8.
9.
POWER (On/Off) – Press
VOLUME – Turn
Station storing buttons/selection of disc
in CD changer (1-6)
BASS – Press out and turn
TREBLE – Press out and turn
BALANCE – Press out and turn
FADER – Press out and turn
SOURCE PUSH MENU –
Open main menu – Press
Turn to select:
Radio – FM, AM
CD
CD changer (option)
SCAN – Automatic station search
EXIT – Scroll back in the menu
10. Navigation buttons –
seek/change station or track
11. CD eject
12. CD slot
13. CD random
14. FM – Shortcut between FM1, FM2, FM3
15. AM – Shortcut between AM1, AM2
16. CD – Shortcut
17. AUTO – Automatic station preset
18. Display
NTV
Audio (option)
Overview HU-850
1.
2.
3.
4.
5.
6.
7.
8.
9.
NUM
POWER (On/Off) – Press
VOLUME – Turn
Station storing buttons/selection of disc
in CD changer (1-6)
BASS – Press out and turn
TREBLE – Press out and turn
BALANCE – Press out and turn
FADER – Press out and turn
SOURCE PUSH MENU –
Open main menu – Press
Turn to select:
Radio – FM, AM
CD
CD changer (option)
SCAN – Automatic station search
EXIT – Scroll back in the menu
10. Navigation buttons –
seek/change station or track
11. CD eject
12. Dolby Surround Pro Logic II
13. 2-channel stereo
14. 3-channel stereo
15. CD slot
16. CD random
17. FM – Shortcut between FM1, FM2, FM3
18. AM – Shortcut between AM1, AM2
19. CD – Shortcut
20. AUTO – Automatic station preset
21. Display
Audio (option)
Audio functions HU-450/650/850
On/Off switch
Press the knob to turn on or
switch off the radio.
Volume control
Turn the knob clockwise to
increase volume. Volume
control is electronic and
lacks an end stop. If you have a steering
wheel keypad, increase or decrease volume
with (+) or (–) buttons.
Low battery voltage
If battery voltage is low, a text appears in the
combined instrument unit display. The energy
economy function of the car may switch off
the radio. Charge the battery by starting the
engine.
Volume control – TP/PTY/
NEWS
If a cassette or CD is playing when the radio
receives a traffic bulletin, news or selected
programme type, the function is interrupted
and the bulletin or message is broadcast with
the volume selected for traffic information,
news or programme type. When the bulletin
or message is finished, the unit immediately
returns to the previously set volume and
resumes playing the cassette or CD.
NUN
Audio (option)
Audio functions HU-450
Bass
Balance – right/left
Adjust the bass by pressing
out the knob and turning it to
the left or right.
The bass is "normalised" in
the centre position. Press
the knob back into its
original position after adjustment.
Adjust balance by pressing
and pulling out the knob and
turning it left or right. The
balance is "normalised" in
the centre position. Press
the knob back into its
original position after adjustment.
Treble
Selecting the sound source
Adjust the treble by pressing
the knob, pulling it out farther
and turning it to the left or
right. The treble is
"normalised" in the centre
position. Press the knob
back into its original position after adjustment.
Fader – Balance front/rear
Set a suitable balance
between the front and rear
speakers by pressing the
knob and turning it right
(more sound from front pair)
or left (more sound from rear
pair). The balance is "normalised" in the
centre position. Press the knob back into its
original position after adjustment.
NUO
There are two ways to select
sound source:
Either with the shortcut keys
AM, FM, TAPE or with the
SOURCE knob. Turn the
SOURCE knob to select
between radio settings (FM1, FM2, FM3 and
AM1, AM2). If a cassette player or CD
changer (option) is connected, it can also be
selected with the knob.
Press the AM or FM button
repeatedly to toggle
between FM1, FM2, FM3
and AM1, AM2.
The selected sound source
is shown on the display.
Audio (option)
Audio functions HU-650/850
Balance – right/left
Adjust balance by pressing the knob and
turning it left or right. The balance is
"normalised" in the centre position. Press the
knob back into its original position after
adjustment.
Press the AM or FM button
repeatedly to toggle
between FM1, FM2, FM3
and AM1, AM2.
The selected sound source
is shown on the display.
Fader – Balance front/rear
Bass
Adjust the bass by pressing out the knob and
turning it to the left or right.
The bass is "normalised" in the centre
position. Press the knob back into its original
position after adjustment.
Treble
Adjust the treble by pressing the knob and
turning it to the left or right. The treble is
"normalised" in the centre position. Press the
knob back into its original position after
adjustment.
Set a suitable balance between the front and
rear speakers by pressing the knob and
turning it right (more sound from front pair) or
left (more sound from rear pair). The balance
is "normalised" in the centre position. Press
the knob back into its original position after
adjustment.
Selecting the sound source
There are two ways to select
sound source:
Either with the shortcut keys
AM, FM, TAPE or with the
SOURCE knob.
Turn the SOURCE knob to
select between radio settings (FM1, FM2,
FM3 and AM1, AM2). If a cassette player or
CD changer (option) is connected, it can also
be selected with the knob.
NUP
Audio (option)
Radio functions HU-450/650/850
Scanning
Press the SCAN button to
start the search. When the
radio finds a station, it stops
there for about 10 seconds
and then continues its
search. To listen to the
station, press the SCAN or EXIT button.
Tuning
Press
or
to seek lower or higher
frequencies. The radio searches for the next
audible station and then stops. Press the
button again to continue the search.
Manual tuning
Press and hold
or
. MAN is shown on
the display. The radio slowly scrolls in the
desired direction, increasing its tempo after a
few seconds. Release the button when the
desired frequency appears on the display.
The frequency can then be adjusted by briefly
pressing one of the arrow keys
or
within five seconds.
Steering wheel keypad
If you have a keypad in the
steering wheel, press the
right or left arrow to select
preset stations.
NUQ
NOTE! If the car is equipped with an
integrated telephone, the steering wheel
keypad cannot be used for radio functions
while the telephone is in use. Telephone information is continuously displayed while the
telephone is in use. Switch off the telephone
with
. If there is no SIM card in the
telephone, switch it off, see page 202.
Audio (option)
Radio functions HU-450
Programming stations
– Set the desired frequency.
– Briefly press the PRESET/CD knob.
Select a number by turning forward or
back. Press again to store the desired
frequency and station.
Preset
To select a preset radio
programme, turn the
PRESET/CD knob to the
stored number. The preset
programme is shown on the
display.
Autostoring stations
This function automatically
seeks and stores up to 10
strong AM or FM stations in
a separate memory. The
function is especially useful
in areas in which you are
unfamiliar with the radio stations or their
frequencies.
the set frequency band are saved in the
autostore memory. If there are no stations
with sufficient signal strength,
NO STATION is displayed.
– Briefly press the AUTO button or one of
the arrows of the steering wheel keypad
to scroll to another of the automatically
preset stations.
AUTO is shown on the display when the radio
is in autostore mode. The text disappears
when you return to ordinary radio mode.
Return to ordinary radio mode by pressing
FM, AM or EXIT or by turning the PRESET/
CD knob.
Returning to autostore mode:
Briefly press AUTO.
– Select radio mode using the AM or FM
button.
– Start the search by pressing and holding
AUTO (more than 2 seconds).
– AUTO is shown on the display and a
number of strong stations (max. 10) from
NUR
Audio (option)
Radio functions HU-650/850
Storing stations
To store stations on the preset buttons 1-6:
– Set the desired station.
– Press and hold the desired station
storage button. The sound mutes a few
seconds. STATION STORED is shown
on the display.
Up to 6 stations each can be stored under
AM1, AM2, FM1, FM2 and FM3 - a total of 30
stations.
Autostoring stations
Returning to autostore mode:
AUTO seeks and stores up
to ten strong AM or FM
stations in a separate
memory. If more than ten
stations are found, the ten
strongest are selected. This
function is particularly useful areas in which
you are unfamiliar with the radio stations and
their frequencies.
– Briefly press AUTO.
– Select radio mode using the AM or FM
button.
– Start the search by pressing and holding
AUTO (more than 2 seconds).
– AUTO is shown on the display and a
number of strong stations (max. 10) from
the set frequency band are saved in the
autostore memory. If there are no stations
with sufficient signal strength,
NO STATION is displayed.
– Briefly press the AUTO button or one of
the arrows of the steering wheel keypad
to scroll to another of the automatically
preset stations.
AUTO is shown on the display when the radio
is in autostore mode. The text disappears
when you return to ordinary radio mode.
Return to ordinary radio mode by pressing the
FM, AM or EXIT button.
NUS
Audio (option)
Radio functions HU-450/650/850
Radio Data System – RDS
Traffic information – TP station
RDS is a system that links together specific
network transmitters. It is used, for example,
to tune the correct frequency of a station
irrespective of the transmitter or the active
audio source (e.g. CD). The system can also
be used for receiving traffic information and
for finding broadcasts of a specific type.
Radio text is also a component of RDS. A
radio station can transmit information about
the radio programme currently being
broadcast.
Traffic information from RDS stations interrupts other sound sources. The message is
heard at the volume set for this specific
feature. As soon as the message ends, the
audio system returns to the previous sound
source and volume setting.
Some radio stations do not use RDS or only
use a limited range of its features.
PI seek (automatic search for
stations)
When listening to an RDS transmitter, various
information, such as traffic information, is
stored in the radio.
When a preset RDS transmitter is later
selected, the radio updates the transmitter’s
RDS information. If the radio is at the
boundary or just outside of the transmitter’s
range, the radio automatically seeks the
strongest possible transmitter of that channel.
If there is no audible transmitter, the radio
quiets and the PI SEEK appears on the
display until the station is found.
Activating traffic information:
– Select radio mode using the FM button
and press SOURCE.
– Select TP and press SOURCE.
– Turn SOURCE, select TP ON (flashing
text) and press SOURCE.
– Press EXIT.
Deactivate TP:
– Select radio mode using the FM button
and press SOURCE.
– Select TP and press SOURCE.
– Turn SOURCE, select TP OFF (flashing
text) and press SOURCE.
– Press EXIT.
TP is shown on the display when the function
is activated. Press EXIT if you do not wish to
listen to a traffic bulletin.
The TP function remains active and the radio
waits for the next traffic bulletin.
Activate traffic information from a
special channel:
– Select radio mode using the FM button.
– Activate the station from which traffic
information is to be received.
– Press SOURCE.
– Turn SOURCE, select ADVANCED
MENU and press SOURCE.
– Turn SOURCE, select RADIO SETTINGS
and press SOURCE.
– Turn SOURCE, select TP STATION and
press SOURCE.
– Turn SOURCE, select SET CURRENT
and press SOURCE.
– Press EXIT.
Deactivating TP Station
– Select radio mode using the FM button
and press SOURCE.
– Turn SOURCE, select ADVANCED
MENU and press SOURCE.
– Turn SOURCE, select RADIO SETTINGS
and press SOURCE.
– Turn SOURCE, select TP STATION and
press SOURCE.
– Turn SOURCE, select TP STATION OFF
and press SOURCE.
– Press EXIT.
Alarm
"Alarm!" is shown in the radio display when
an alarm message is broadcast. This function
warns motorists for serious collisions or other
NUT
Audio (option)
Radio functions HU-450/650/850
hazardous situations such as a collapsed
bridge or nuclear mishap.
TP search
This function allows you to listen to traffic
information when travelling between different
areas and countries without selecting a
station.
– Select radio mode using the FM button
and press SOURCE.
– Turn SOURCE, select
ADVANCED MENU and press SOURCE.
– Turn SOURCE, select RADIO SETTINGS
and press SOURCE.
– Turn SOURCE, select TP SEARCH and
press SOURCE.
– Turn SOURCE, select TP SEARCH ON
or TP SEARCH OFF (flashing text) and
press SOURCE.
– Press EXIT.
News
Messages with a programme code (such as
news from RDS stations) will interrupt other
sound sources at the volume set for this
specific feature. As soon as the news
broadcast is finished, the audio system
returns to the previous sound source and
volume setting.
NUU
Activating News:
– Select radio mode using the FM button
and press SOURCE.
– Turn SOURCE, select NEWS and press
SOURCE.
– Turn SOURCE, select NEWS ON
(flashing text) and press SOURCE.
– Press EXIT.
NEWS appears on the display.
Deactivating News:
– Select radio mode using the FM button
and press SOURCE.
– Turn SOURCE, select NEWS and press
SOURCE.
– Turn SOURCE, select NEWS OFF
(flashing text) and press SOURCE.
– Press EXIT.
NEWS disappears from the display.
Press EXIT if you do not wish to listen to a
news broadcast. The News function remains
active and the radio waits for the next news
programme.
Interruptions for news from the current
station
– Select radio mode using the FM button.
– Activate the station from which traffic
information is to be received.
– Press SOURCE.
– Turn SOURCE, select
ADVANCED MENU and press SOURCE.
– Turn SOURCE, select RADIO SETTINGS
and press SOURCE.
– Turn SOURCE, select NEWS STATION
and press SOURCE.
– Turn SOURCE, select SET CURRENT
and press SOURCE.
– Press EXIT.
Deactivating News Station:
– Select radio mode using the FM button
and press SOURCE.
– Turn SOURCE, select
ADVANCED MENU and press SOURCE.
– Turn SOURCE, select RADIO SETTINGS
and press SOURCE.
– Turn SOURCE, select NEWS STATION
and press SOURCE.
– Turn SOURCE, select NEWS STN OFF
and press SOURCE.
– Press EXIT.
Programme type
OFF
News
Current affairs
Information
Sport
Education
Displayed
PTY OFF
News
Current
Info
Sport
Educ
Audio (option)
Programme type
Drama
Culture and Art
Science
Entertainment
Pop music
Rock music
Easy listening
Light classic
Serious classic
Other music
Weather & Metro
Finance
Children’s progs
Social affairs
Religion
Phone In
Travel and holiday
Leisure and hobby
Jazz music
Country music
National music
Oldies music
Folk music
Documentary
Displayed
Theatre
Culture
Science
Enterta
Pop
Rock
Easy list
L Class
Classical
Other M
Weather
Economy
For children
Social
Spiritual
Telephone
Travel
Leisure
Jazz
Country
Nation M
"Oldies"
Folk
Document
Programme type – PTY
Use the PTY function to select between the
various programme types.
– Select radio mode using the FM button
and press SOURCE.
– Turn SOURCE, select PTY and press
SOURCE.
– Turn SOURCE, select PTY in the menu
and press SOURCE.
– The radio begins seeking the selected
programme type.
– If you do not wish to listen to the station
found by the radio, continue the search
using the left or right arrow key.
– If the radio does not find a station with the
selected programme type, it returns to the
previous frequency.
Not all radio stations have a PTY designation.
PTY standby
PTY mode is then in standby until the
selected programme type is broadcast.
When this happens, the radio automatically
switches to the station broadcasting the
selected programme type.
Deactivating:
– Select radio mode using the FM button
and press SOURCE.
– Turn SOURCE, select PTY and press
SOURCE.
– Turn SOURCE, select PTY OFF and
press SOURCE.
– Press EXIT.
The PTY symbol disappears from the display
and the radio resumes normal mode.
PTY language
The PTY function can be used to select the
language used in the radio display (English,
German, French or Swedish).
– Select radio mode using the FM button
and press SOURCE.
– Turn SOURCE, select
ADVANCED MENU and press SOURCE.
– Turn SOURCE, select RADIO SETTINGS
and press SOURCE.
– Turn SOURCE, select PTY LANGUAGE
and press SOURCE.
– Turn SOURCE, select language and
press SOURCE.
– Press EXIT.
Automatic frequency updating
The AF function is normally activate and
ensures that the radio tunes to the strongest
available transmitter.
Activating AF:
– Select radio mode using the FM button
and press SOURCE.
– Turn SOURCE, select
ADVANCED MENU and press SOURCE.
– Turn SOURCE, select RADIO SETTINGS
MENU and press SOURCE.
NUV
Audio (option)
Radio functions HU-450/650/850
– Turn SOURCE, select AF ON (flashing
text) and press SOURCE.
– Press EXIT.
Deactivating AF:
– Select radio mode using the FM button
and press SOURCE.
– Turn SOURCE, select
ADVANCED MENU and press SOURCE.
– Turn SOURCE, select RADIO SETTINGS
MENU and press SOURCE.
– Turn SOURCE, select AF OFF (flashing
text) and press SOURCE.
– Press EXIT.
Regional radio programmes
The regional function is normally deactivated.
When the function is activated you can
continue to listen to a regional broadcasts
even if the signal is weak.
Activating REG:
– Select radio mode using the FM button
and press SOURCE.
– Turn SOURCE, select
ADVANCED MENU and press SOURCE.
– Turn SOURCE, select RADIO SETTINGS
MENU and press SOURCE.
– Turn SOURCE, select REG ON (flashing
text) and press SOURCE.
– Press EXIT.
NVM
REG is shown on the display.
Deactivating REG:
– Select radio mode using the FM button
and press SOURCE.
– Turn SOURCE, select
ADVANCED MENU and press SOURCE.
– Turn SOURCE, select RADIO SETTINGS
MENU and press SOURCE.
– Turn SOURCE, select REG OFF (flashing
text) and press SOURCE.
– Press EXIT.
EON – Local/Distant (Enhanced
Other Networks)
When EON is activated, the radio programme
is interrupted for traffic bulletins, news broadcasts or the like from other channels.
The function has two levels:
Local - only interrupts if the signal is strong.
Distant - also interrupts with weaker signals.
– Select radio mode using the FM button
and press SOURCE.
– Turn SOURCE, select
ADVANCED MENU and press SOURCE.
– Turn SOURCE, select RADIO SETTINGS
MENU and press SOURCE.
– Turn SOURCE, select EON (flashing text)
and press SOURCE.
– Turn SOURCE, select Local or Distant
and press SOURCE.
– Press EXIT.
Resetting RDS functions
Resets all radio settings to the original factory
settings.
– Select radio mode using the FM button
and press SOURCE.
– Turn SOURCE, select
ADVANCED MENU and press SOURCE.
– Turn SOURCE, select RESET TO
DEFAULT and press SOURCE.
– Press EXIT.
ASC (Active Sound Control)
The ASC function automatically adapts the
volume of the radio to vehicle speed.
Activating ASC:
– Select radio mode using the FM button
and press SOURCE.
– Turn SOURCE, select
ADVANCED MENU and press SOURCE.
– Turn SOURCE, select AUDIO SETTINGS
MENU and press SOURCE.
– Turn SOURCE, select ASC LEVEL and
press SOURCE.
– Turn SOURCE select LOW, MEDIUM,
HIGH or Off and press SOURCE.
Audio (option)
Radio text
Some RDS stations broadcast information,
such as about programme content and
artists.
Hold the FM button depressed a few
seconds to access any transmitted radio text,
which then appears on the display. After the
text is shown twice, the radio once again
displays the station/frequency. A brief press
on the FM button ends radio text display.
NVN
Audio (option)
Cassette player HU-450
Cassette eject
Fast forward/reverse
If you press the button, the
tape stops and the cassette
is ejected. Turn the
SOURCE knob to select a
new programme source. The
cassette can be inserted or
ejected even if the system is switched off.
The tape is fast forwarded
by pressing and holding
and is rewound with
.
"FF" (fast forward) or "REW"
(rewind) is shown in the
display during this time.
Press the button again to stop fast
forwarding/rewinding.
Dolby B Noise Reduction
Cassette opening
Insert the cassette in the slot with the wider
part to the right. TAPE Side A appears on the
display. When one side is finished, the player
automatically plays the other side (auto
reverse). To play a cassette that is already in
the player, turn the SOURCE knob or press
the TAPE shortcut key.
Changing tape direction
Press the REV button in order to play the
other side of the cassette; the side being
played will be shown in the display.
NVO
This is a preset function which can be
switched off as follows: press and hold the
REV button until the Dolby symbol
disappears from the display. Press the same
button again in order to reactivate the Dolby
function.
Dolby Noise Reduction is manufactured
under license of Dolby Laboratories
Licensing Corporation. Dolby and the double
D symbol
are trademarks of Dolby
Laboratories Licensing Corporation.
Scanning
Scan plays the first ten
seconds of each track.
Press the SCAN or EXIT
button when you find a track
you wish to listen to.
Next track, Previous track
Pressing
automatically fast forwards the
tape to the next track. Pressing
automatically rewinds the tape to the previous track.
For this function to be operational, there must
be a five second pause between tracks. If the
car is equipped with a steering wheel keypad,
the arrows can also be used.
Audio (option)
CD player HU-650
CD player
Insert a CD. If there is already a CD in the
player, activate it by turning the SOURCE
knob or pressing the CD shortcut key.
CD eject
If you press the button
shown in the illustration, the
CD player stops playing and
the disc is ejected.
NOTE! For reasons of traffic
safety, you have twelve
seconds to handle the ejected disc.
Otherwise, the CD is drawn back into the
player and resumes with the most recently
played track.
Fast forward/reverse
Press and hold down
or
to search within a track
or the whole disc. The
search continues as long as
the button is depressed.
Changing tracks
Press
or
to come to
the previous or next track.
The track number is shown
on the display.
The steering wheel keypad can also be used
for this.
Scanning
Scan plays the first ten seconds of each
track.
Press the SCAN or EXIT button when you find
a track you wish to listen to.
Random
Press RND (random) to
connect the random
function. The system plays
tracks from the disc in
random order. "RND" is
displayed as long as this
function is activated.
NOTE! If the quality of the CD does not
comply with the requirements of standard
EN60908 or if it has been recorded using
poor equipment, sound quality may be poor
or playback interrupted.
Important!
Only use standard size discs (12 cm - no
smaller). Do not use CDs with a sticker
label. Heat from the CD player could
cause the label to let loose from the disc,
possibly damaging the CD player.
NVP
Audio (option)
Internal CD changer HU-850
Internal CD changer
HU-850 contains an internal 6-disc CD
changer. Press the CD shortcut key or press
the SOURCE knob to activate the CD player.
The CD player resumes with the most
recently played CD. Up to 6 discs can be
inserted in the CD player. An empty slot in the
player must be selected when inserting a
disc. This is done by selecting from
buttons 1-6. An available position is shown
on the display. Make sure "LOAD DISC" is
shown before inserting a new disc.
Fast forward/reverse
Press and hold down
or
to search within a track
or the whole disc. The
search continues as long as
the button is depressed.
Changing tracks
Press
or
to come to
the previous or next track.
The track number is shown
on the display.
CD eject
If you press the button
shown in the illustration, the
CD player stops playing and
the disc is ejected.
NOTE! For reasons of traffic
safety, you have twelve
seconds to handle the ejected disc.
Otherwise, the CD is drawn back into the
player and resumes with the most recently
played track.
Selecting disc number
Use buttons 1-6 to select which disc is to be
played. The disc and track numbers are
shown on the display.
NVQ
The steering wheel keypad
can also be used for this.
Scanning
Scan plays the first ten seconds of each
track.
Press the SCAN or EXIT button when you find
a track you wish to listen to.
Random
Press RND (random) to
connect the random
function. A randomly
selected disc plays a
randomly selected track. A
new disc and track are then
chosen the same way. "RND" is displayed as
long as this function is activated.
NOTE! If the quality of the CD does not
comply with the requirements of standard
EN60908 or if it has been recorded using
poor equipment, sound quality may be poor
or playback interrupted.
Important!
Only use standard size discs (12 cm - no
smaller). Do not use CDs with a sticker
label. Heat from the CD player could
cause the label to let loose from the disc,
possibly damaging the CD player.
Audio (option)
External CD changer HU-450/650/850
– Pull out the CD cartridge and insert the
discs.
– Reinsert the cartridge in the CD changer.
Selecting discs
Select which disc is to be played by turning
the PRESET/CD knob (HU-450) or using
buttons 1-6 (HU-650/850). The disc and
track numbers are shown on the display.
Changing tracks
Press
or
to come to
the previous or next track.
The track number is shown
on the display.
CD changer
The external CD changer (option) is mounted
behind the panel on the rear left-hand side of
the cargo compartment.
The steering wheel keypad
can also be used for this.
Fast forward/reverse
Press and hold down
or
to search within a track
or the whole disc. The
search continues as long as
the button is depressed.
Activate the CD changer mode by turning the
SOURCE knob; the CD changer resumes
playing the most recently played disc and
track. If the CD player cartridge* is empty,
"LOAD CARTRIDGE" will be shown on the
display.
Loading discs in the CD changer:
Scanning
– Slide open the CD changer cover.
– Press the cartridge eject button on the
changer.
Scan plays the first ten seconds of each
track.
Random
Press RND (HU-650 and
850) to activate the Random
function. For radio HU-450,
it is activated with the REV
button. A randomly selected
track is played from a
randomly selected disc. A new track or disc is
then selected the same way. "RND" is
displayed while this function is active.
NOTE! If the quality of the CD does not
comply with the requirements of standard
EN60908 or if it has been recorded using
poor equipment, sound quality may be poor
or playback interrupted.
Important!
Only use standard size discs (12 cm - no
smaller). Do not use CDs with a sticker
label. Heat from the CD player could
cause the label to let loose from the disc,
possibly damaging the CD player.
Press the SCAN or EXIT button when you find
a track you wish to listen to.
NVR
Audio (option)
Dolby Surround Pro Logic II HU-850
Dolby Surround Pro Logic II is a further
refinement of the previous system and
provides a significantly improved sound
experience. This improvement is especially
noticeable to rear seat passengers.
Dolby Surround Pro Logic II together with a
centre speaker in the dashboard offers a
sound experience very close to being there.
The normal left-right stereo channels are
divided into left-centre-right. In addition,
surround sound is produced by the rear
speakers. Dolby Surround Pro Logic II works
in CD mode.
3-channel stereo (3-CH) is recommended for
AM and FM radio transmissions.
Dolby Surround Pro Logic II is a registered
trademark of Dolby Laboratories Licensing
Corporation. Dolby Pro Logic II Surround
System is licensed from Dolby Laboratories
Licensing Corporation.
Dolby Surround Pro Logic II
Mode
To select
Dolby Surround Pro Logic II
Mode, press "
PL II".
"
PL II" is shown on the
display. Press OFF to return
to 2-channel stereo.
NVS
3-channel stereo
Select 3-channel stereo by
pressing 3-CH; "3 ch" will
be shown in the display.
Resume 2-channel stereo
function by pressing OFF.
Centre Level
This function is used to set the level of the
centre channel.
– Press SOURCE.
– Turn SOURCE, select ADVANCED
MENU and press SOURCE.
– Turn SOURCE, select AUDIO SETTINGS
and press SOURCE.
– Turn SOURCE, select CENTRE LEVEL
and press SOURCE.
– Turn SOURCE, select level and press
SOURCE.
– Press EXIT.
Surround Level
This function is used to set the output level of
the rear channels.
– Press SOURCE.
– Turn SOURCE, select ADVANCED
MENU and press SOURCE.
– Turn SOURCE, select AUDIO SETTINGS
and press SOURCE.
– Turn SOURCE, select
SURROUND LEVEL and press
SOURCE.
– Turn SOURCE, select level and press
SOURCE.
– Press EXIT.
Mid EQ Level
This function is used to fine-tune the sound
from the speakers.
– Press SOURCE.
– Turn SOURCE, select ADVANCED
MENU and press SOURCE.
– Turn SOURCE, select AUDIO SETTINGS
and press SOURCE.
– Turn SOURCE, select MID EQ LEVEL
and press SOURCE.
– Turn SOURCE, select level and press
SOURCE.
– Press EXIT.
Audio (option)
Technical data
HU-850
HU-450
Output
Impedance
Voltage required
4 x 25 W
4 Ohm
12 V, negative
ground
Radio
Frequency
U (FM)
M (AM)
L (AM)
87.5 – 108 MHz
522 - 1611 kHz
53 – 279 kHz
HU-650
Output
Impedance
Voltage required
External amplifier
(option)
4 x 25 W
4 Ohm
12 V, negative
ground
4 x 50 W or
4 x 75 W
Output
1 x 25 W (centre
loudspeaker)
Impedance
4 Ohm
Voltage required
12 V,
negative ground
External amplifier
4 x 50 W or 4 x 75
W
HU-850 must be connected to an external
amplifier.
Radio
Frequency
U (FM)
M (AM)
L (AM)
87.5 – 108 MHz
522 - 1611 kHz
153 – 279 kHz
Radio
Frequency
U (FM)
M (AM)
L (AM)
87.5 – 108 MHz
522 - 1611 kHz
153 – 279 kHz
NVT
Audio (option)
NVU
Telephone (option)
Telephone system
Operating
Call options
Memory functions
Menu functions
Miscellaneous information
200
202
203
207
208
213
NVV
Telephone (option)
Telephone system
General rules
• Put traffic safety first! If when driving you
require to use the privacy handset in the
armrest, park the car in a safe place first.
• Switch off the telephone when refuelling.
• Switch off the telephone in areas where
blasting work is being carried out.
• Only allow authorised personnel service
your telephone.
Emergency calls
• Emergency calls to emergency services
can be made without the ignition key or
the SIM card.
• Press the ON/OFF button.
• Ring the emergency number that applies
to your region (within EU: 112).
• Press the green button
.
Telephone system components
1. Keypad on centre console
All telephone functions can be controlled via
the keypad in the centre console.
2. Steering wheel keypad
The majority of telephone functions can be
controlled via the steering wheel keypad.
When the telephone is active, the keypad can
only be used for telephone functions.
OMM
Telephone information is always shown in the
display when the telephone is activated. The
telephone must be deactivated in order to use
the buttons for radio settings, page 202.
3. Display
The display will show menu functions,
messages, telephone numbers, etc.
4. Privacy handset
The privacy handset can be used for private
conversations when you do not wish to be
disturbed.
5. SIM card
The SIM card is inserted below the keypad in
the centre console.
Switch off the telephone whenever a SIM
card is not in use. Otherwise, messages from
other functions cannot be shown on the
display.
6. Microphone
The microphone is integrated in the rearview
mirror.
7. Loudspeaker
The speaker is integrated in the driver’s seat
head restraint.
8. Antenna
The antenna is mounted against the
windscreen in front of the rearview mirror.
Telephone (option)
OMN
Telephone (option)
Operating
SIM card
The telephone can only be used with a valid
SIM card (Subscriber Identity Module). Your
network operator supplies this card.
Always use the SIM card during telephone
use; the name of your network operator will be
displayed.
Switch off the telephone whenever a SIM
card is not in use. Otherwise, messages from
other functions cannot be displayed and the
radio controls in the steering wheel keypad
cannot be used.
OMO
Switching the telephone on and
off
To switch the telephone on: Turn the ignition
key to position I. Press the button marked in
the illustration.
To switch the telephone off: Press the same
button for three seconds. If you switch off the
car while the telephone is on, it will be on the
next time you switch on the ignition.
Telephone calls cannot be received if the
telephone is switched off.
Active mode
The telephone must be in active mode for its
functions to be available for use (does not
apply to receiving calls). Activate the
telephone by pressing
in the keypad in
the centre console or in the steering wheel
keypad.
Telephone information is shown continuously
in the display when the telephone is activated.
Press
to deactivate the telephone.
Telephone (option)
Call options
Display
Making and receiving calls
Ending a call
The display will show the function in use, for
example menu selections, messages,
telephone numbers or settings.
To call: dial the number and press
on the
steering wheel or centre console keypad (or
lift the handset).
To end a call, press
on one of the
keypads or hang up the handset. The audio
system resumes its previous mode.
To receive an incoming call: press
(or lift
the privacy handset). You can also select
Automatic Answer, refer to menu
function 4.3.
The car audio system will be muted automatically while a telephone conversation is in
progress. Refer to menu function 5.6.5 for
information about audio system volume levels.
OMP
Telephone (option)
Call options
Speed dial
Storing speed dial numbers
A number stored in the telephone book can
be linked to a speed dial button (1-9) as
follows:
Last number called
Privacy handset
The telephone automatically stores the last
telephone numbers/names called.
If you wish to talk undisturbed, use the privacy
handset.
– Press
– Lift the handset. Dial the number on the
centre console keypad. Press
to call.
Adjust the volume with the dial on the side
of the handset.
– The call is ended when you replace the
handset in its holder.
If you wish to switch to handsfree without
ending the call: Press
and select
Handsfree. Press
and put the handset
down, page 203.
on one of the keypads.
– Use the arrows to scroll forward
or
backward
through the last numbers
called.
Press
the call.
OMQ
(or lift the privacy handset) to make
– Scroll with
to Edit memory (menu 3)
and press
.
– Scroll to Speed dial (Menu 3.4) and press
.
– Choose the digit that is to be the speed
dial number. Press
to confirm.
– Find the desired name or telephone
number in the memory and press
to
select it.
Using speed dial
Press the desired speed dial button for about
two seconds to make a call.
NOTE! Once you switch on the telephone,
wait a moment before using speed dial. If you
wish to use a speed dial number, Menu 4.5
must be activated, see page 211.
Telephone (option)
Functions during a call
The following functions are available during a
call (scroll with the arrows and press YES to
make a selection):
Secret mode/
Secret mode
off
Hold/Don’t
hold
Handset/
Handsfree
Memory
Secret mode
Choose whether or not
the call is to be put on
hold
Use the handset or
handsfree
Show stored numbers
The following functions are available when
you have a current call and a parked call
(scroll with the arrows and press YES to make
a selection):
Secret mode/
Secret mode
off
Handset/
Handsfree
Memory
Three-way
calling
Switch
Secret mode
Use the handset or
handsfree
Show stored numbers
Speak with both
parties simultaneously
(conference call)
Switch between the
two calls
The following functions are available when
you have selected Three-way calling and have
two calls in progress (scroll with the arrows
and press YES to make a selection):
Secret mode/
Secret mode
off
Handset/
Handsfree
Memory
Secret mode
Use the handset or
handsfree
Show stored numbers
Call waiting
If you hear a tone in the speaker when the
telephone is engaged followed by a two-tone
signal, another party is placing a call to your
phone.
The two-tone signal will repeat until you
answer the call or ringing ceases.
When this occurs, you may accept or decline
the call.
If you do not wish to take the call, press
or do nothing. If you do wish to take the call,
press
. Your current call will be put in
"park mode". If you press
, both calls will
be terminated.
OMR
Telephone (option)
Call options
SMS
A single two-tone signal indicates that you
have received an SMS message.
Volume
Raise the volume with the (+) button in the
steering wheel keypad. Lower the volume with
the (–) button.
When the telephone is activated, the steering
wheel keypad only controls the telephone
functions.
If you wish to adjust radio settings using these
buttons you must first deactivate the
telephone, see page 202.
OMS
Telephone (option)
Memory functions
Telephone numbers and names can be
stored in either the telephone memory or the
SIM card memory.
def3èéëê
When you accept a telephone call from a
party whose number is stored in the memory,
their name will be shown in the display.
jkl5
The telephone memory can store up to
255 names.
pqrs7ß
Storing telephone numbers with
names
ghi4ìíîï
mno6ñöòóØ
tuv8üùúû
wxyz9
– Press
and toggle to Edit memory
(Menu 3). Press
.
– Scroll to Enter item in memory (Menu 3.1)
and press
.
if you enter two letters in a row
from the same button, press *
between them or wait a few
seconds
[email protected]*#&$£/%
– Enter a number and press
change between capital and
lower case letters
delete the last letter or number
entered. If you press for a long
time, the enter number or text is
deleted.
– Enter a name and press
.
.
– Choose in which memory to save with
and press
.
Enter a name (or message)
Press the button with the desired character:
once for the first character, twice for the
second, etc. Press 1 to enter a space.
Calling from the memory
– Press
.
– Choose from the following alternatives:
Press
and scroll with the arrows until
you find the desired name.
Press the key of the first letter in the name
(or enter the name) and press
.
– Press
to call the selected number.
space 1- ? ! , . : ' ( )
abc2äåàáâæç
OMT
Telephone (option)
Menu functions
The speed limiter can be disconnected using
menu function 5.7.
Use the menu function when checking
functions, changing settings and
programming new functions in your system.
The various menu selections will be shown in
the display.
Menu function
Press
to access the menu function.
The following applies in the menu function:
• A long press on
menu function.
means you exit the
• A short press on
means that you
retract, cancel or reject an
alternative.
• A press on
means that you confirm or
select, or that you scroll from a submenu
to the next submenu.
• The right arrow
leads to the next side
menu. The left arrow
leads to the
previous side menu.
Shortcuts
When you use the right arrow
to enter the
menu system, you can use numbers instead
of the arrows and the green button
to
select the right menu on the main menu level
(1, 2, 3, etc.), first submenu level (1.1, 2.1,
3.1, etc.) and the second submenu level
(1.1.1, 2.1.1, etc.). The numbers are shown in
the display together with the menu alternative.
Traffic safety
For reasons of safety, the menu system
cannot be accessed at speeds in excess of
8 km/h. You may only complete activities in
the menu system that have already been
started.
OMU
Telephone (option)
Main menus/submenus
1. Call register
1.1.
Missed calls
1.2.
Received calls
1.3.
Dialled calls
1.4.
Erase list
1.4.1.
All
1.4.2.
Missed
1.4.3.
Received
1.4.4.
Dialled
1.5.
Call duration
1.5.1.
Last call
1.5.2.
Number of calls
1.5.3.
Total time
1.5.4.
Clear
2. Messages
2.1.
Read
2.2.
Write
2.3.
Voice message
2.4.
Settings
2.4.1.
SMSC number
2.4.2.
Validity
2.4.3.
Type
3. Edit memory
3.1.
Enter item
3.2.
Search
3.2.1.
Edit
3.2.2.
Erase
3.2.3.
Copy
3.2.4.
Move
3.3.
Copy all
3.3.1.
SIM to phone
3.3.2.
Phone to SIM
3.4.
Speed dial
3.5.
Empty SIM
3.6.
Empty memory
3.7.
Status
4. Call options
4.1.
Transmit number
4.2.
Call waiting
4.3.
Automatic answer
4.4.
Automatic redial
4.5.
Speed dial
4.6.
Call divert service
4.6.1.
All calls
4.6.2.
When busy
4.6.3.
When not answered
4.6.4.
Not available
4.6.5.
Fax calls
4.6.6.
Data calls
4.6.7.
Cancel all diverts
5. Settings
5.1.
Factory settings
5.2.
Network selection
5.3.
Language
5.3.1.
English UK
5.3.2.
English US
5.3.3.
Svenska
5.3.4.
Dansk
5.3.5.
Suomi
5.3.6.
Deutsch
5.3.7.
Nederlands
5.3.8.
Français FR
5.3.9.
Français CAN
5.3.10. Italiano
5.3.11. Español
5.3.12. Português P
5.3.13. Português BR
5.4.
SIM security
5.4.1.
On
5.4.2.
Off
5.4.3.
AUTO
5.5.
Change codes
5.5.1.
PIN code
5.5.2.
Telephone code
5.6.
Volume
5.6.1.
Ringer volume
5.6.2.
Ringer tone
5.6.3.
Button click
5.6.4.
Speed volume
5.6.5.
Radio Auto Suppression
5.6.6.
New SMS
5.7.
Traffic safety
OMV
Telephone (option)
Menu functions
Menu options, description
1. Call register
1.1. Missed calls
A list of missed calls is shown here. You can
choose to call, erase or store the number in
the telephone or SIM card memory for later
use.
1.2. Received calls
A list of received calls is shown here. You can
choose to call, erase or store the number in
the telephone or SIM card memory for later
use.
1.3. Dialled calls
A list of dialled numbers is shown here. You
can choose to call, erase or store the number
in the telephone or SIM card memory for later
use.
1.4. Erase list
This option can be used to erase the list of
menus 1.1, 1.2 and 1.3 as follows.
1.4.1.
All
1.4.2.
Missed
1.4.3.
Received
1.4.4.
Dialled
1.5. Call duration
Here you can see the duration of all your calls
or the most recent. You can also see the
number of calls and clear the call timer.
1.5.1.
ONM
Last call
1.5.2.
Number of calls
1.5.3.
Total time
1.5.4.
Clear
Resetting the call timer requires the
telephone code (see Menu 5.5).
2. Messages
2.1. Read
Here you can read received text messages.
You can then choose to erase the message,
forward it, change or save the entire message
or parts of it.
2.2. Write
You can write a text message using the
keypad. Then choose to save or send it.
2.3. Voice message
Listen to received messages.
2.4. Settings
Enter the number (SMSC number) of the
message centre to which you want your
messages transferred. Specify how the
message is to reach the addressee and how
long it is to be stored in the message centre.
2.4.1.
SMSC number
2.4.2.
Validity
2.4.3.
Type
Contact your service provider for information
on these settings and for an SMSC number.
3. Edit memory
3.1. Enter item
You can store names and telephone numbers
in the telephone or SIM card memory. See the
section on memory functions for more information.
3.2. Search
Changes in the memory can be made here.
3.2.1.
Edit: Change data in the different
memories.
3.2.2.
Erase: Remove a saved name.
3.2.3.
Copy: Copy a saved name.
3.2.4.
Move: Transfer information
between the memory of the
telephone and the SIM card.
3.3. Copy all:
Copy telephone numbers and names from
the SIM card to the telephone memory.
3.3.1.
From SIM to telephone memory
3.3.2.
From telephone to SIM memory
3.4. Speed dial
A number stored in the telephone book can
be stored as a speed dial number.
3.5. Empty SIM
The entire memory of the SIM card can be
erased.
3.6. Empty memory
The entire memory of the phone can be
erased.
Telephone (option)
3.7. Status
See how many places in the SIM card or
telephone memory are occupied by names
and numbers.
4. Call options
4.1. Transmit number
Select whether or not your own number
should be displayed to the person you call.
Contact your network operator regarding
permanently withheld numbers.
4.2. Call waiting
Choose whether or not you want to be alerted
during a phone call that there is another call
coming in.
4.3. Automatic answer
Chose to answer without using the keypad.
4.4. Automatic redial
Choose to call a previously dialled number
that was busy.
4.5. Speed dial
Here you set whether or not speed dial is to
be active. The function must be activated if
you wish to dial using speed dial numbers.
4.6. Call divert service
Here you can choose when and what type of
calls are to be diverted to a specified
telephone number.
4.6.1.
4.6.2.
4.6.3.
4.6.4.
4.6.5.
4.6.6.
4.6.7.
All calls (this setting only applies
during the call in progress).
When busy
When not answered
Not available
Fax calls
Data calls
Cancel all diverts
5. Settings
5.1. Factory settings
Function to return to the system’s factory
settings.
5.2. Network selection
Choose a network automatically or manually.
5.2.1.
AUTO
5.2.2.
Manual
5.3. Language
Here you can choose which language the
telephone is to display.
5.3.1.
5.3.2.
5.3.3.
5.3.4.
5.3.5.
5.3.6.
5.3.7.
5.3.8.
5.3.9.
5.3.10.
English UK
English US
Svenska
Dansk
Suomi
Deutsch
Nederlands
Français FR
Français CAN
Italiano
5.3.11. Español
5.3.12. Português P
5.3.13. Português BR
5.4. SIM security
Choose if the PIN code is to be on, off, or
automatic.
5.4.1.
On
5.4.2.
Off
5.4.3.
AUTO
5.5. Change codes
Change the PIN code or telephone code.
5.5.1.
5.5.2.
PIN code
Telephone code (use 1234 until
you change to your own code). The
telephone code is used to reset the
call timer.
NOTE! Make a note of your code as save it in
a safe place.
5.6. Volume
5.6.1.
Ringer volume: Here you can
choose the volume of the ringer for
incoming calls.
5.6.2.
Ring signal: You have eight
different types of ring signals to
choose from.
5.6.3.
Button click: On or Off.
5.6.4.
Speed volume: Choose whether
the volume should be adjusted
according to speed.
ONN
Telephone (option)
Menu functions
5.6.5.
Radio Auto Suppression: Here you
choose whether the volume of the
radio should remain the same
during telephone calls.
5.6.6.
New SMS: Select whether or not
you wish the telephone to notify of
new SMS messages with an
audible signal.
5.7. Traffic safety
Here you can choose to disengage the speed
limiter for the menu system, i.e. choose to use
the menu system even while driving.
ONO
Telephone (option)
Miscellaneous information
Specifications
Output
SIM card
Memory entries
SMS
(Short Message Service)
Data/Fax
Dualband
2W
Small
2551
Yes
No
Yes
(900/1800)
1. The telephone memory contains 255
positions. The number of SIM card memory
positions varies depending on your
subscription.
Radio/Telephone
Double SIM cards
The four lower buttons on the steering wheel
keypad are common to the audio system and
telephone.
Many network operators offer double SIM
cards - one for your car and one for another
telephone. A double SIM card allows you to
have the same number for two different
telephones. Ask your network operator about
the offers available and the use of double SIM
cards.
If you wish to control telephone functions with
these buttons you must first activate the
telephone, see page 202. If you wish to
adjust radio settings using these buttons you
must first deactivate the telephone.
Press
.
IMEI number
To block the telephone, you must provide
your network operator with the telephone’s
IMEI number. This is a 15-digit serial number
that is programmed in the phone. To display
this number, press *#06#. Make a note of
this number and keep it in a safe place.
ONP
Telephone (option)
ONQ
Technical data
Type designation
Dimensions and weights
Engine specifications
Capacities
Fuel
Catalytic converter
Electrical system
216
217
218
220
224
226
227
ONR
Technical data
Type designation
Whenever contacting your Volvo dealer and
when ordering spare parts and accessories
for your car, it makes things easier if you
know your car’s type designation, vehicle
identification number and engine number.
1.
Type and model year designations and
chassis number. Stamped in the
engine compartment underneath the
windscreen.
2. Type designation, vehicle identification
number, maximum permissible
weights, codes for colour and upholstery and type approval number. Plate
on the wing liner behind the right
headlamp.
3. Engine type designation, component
and serial number (on the right-hand
side of the engine).
4. Gearbox type designation and serial
number
a: manual gearbox (on front side)
b: Automatic gearbox AW: on the upper
side
5.
1.
ONS
Certain engine variants.
The engine oil decal1 indicates oil
grade and viscosity (located on lower
edge of the bonnet).
Technical data
Dimensions and weights
Trailer with brakes:
Dimensions
Length: 460 cm (R:461 cm)
Maximum trailer
weight:
Width: 180 cm
Maximum
towball load:
Height: 143 cm
0-1200 kg
50 kg
Wheelbase: 272 cm
1201-1600 kg
75 kg
Front track: 156 cm
Rear track: 156 cm
Weights
The kerb weight includes the driver, the fuel
tank 90 % full and all fluids. The weight of
passengers and accessories, such as a
towbar, towball load (when a trailer is hitched,
see table), load carriers, and roof box etc.
influence the payload and must not be
included in the kerb weight. Permitted weight
(in addition to driver) = Gross vehicle weight–
Kerb weight.
See decal location on page 216.
1. Max. total weight
2. Max. train weight (car+trailer)
3. Max. front axle load
4. Max. rear axle load
Maximum load: See registration document.
Maximum roof load: 100 kg
Trailer without brakes
Maximum trailer weight 750 kg.
WARNING!
The car’s driving characteristics change
depending on how heavily it is loaded and
how the load is distributed.
ONT
Technical data
Engine specifications
Engine type designation, component and
serial number can be read on the engine, see
page 216.
Specifications
Engine designation
2.4
B5244S2
Output (kW/rps)
(hp/rpm)
Torque (Nm/rps)
(kpm/rpm)
103/75
140/4500
220/55
22,5/3300
BI-FUEL
(CNG)
B5244SG
103/97
140/5800
192/75
19,6/4500
No. of cylinders
Bore (mm)
Stroke (mm)
5
83
90
2.44
5
83
90
2.44
5
83
90
2.44
5
83
90
2.44
132/92
180/5500
240/31-83
24,5/18505000
5
81
77
1.98
10.3:1
10.3:1
10.3:1
10.3:1
9.5:1
9.0:1
1,2
30
1,2
30
1,2
30
1,2
30
0,7
30
0,7
30
Swept volume (dm3 or litres)
Compression ratio
Spark plugs:
Electrode gap (mm)
Tightening torque (Nm)
ONU
BI-FUEL
(LPG)
B5244SG2
103/85
140/5100
214/75
21,8/4500
2.4
B5244S
2.0T
B5204T5
2.5T
B5254T2
125/100
170/6000
225/75
23,0/4500
154/83
210/5000
320/25-75
32,6/15004500
5
83
93.2
2.52
Technical data
Specifications
Engine designation
R
B5254T4
D5
D5244T
2.4D
D5244T2
Output (kW/rps)
B5244T4
162/92
T5
B5244T5
191/92
120/67
96/67
(hp/rpm)
220/923
220/1004
D5244T32
85/67
220/5000
260/5500
300/55003
300/60004
163/4000
130/4000
116/4000
Torque (Nm/rps)
AWD
(kpm/rpm)
AWD
350/35-67
350/35-83
340/29-50
280/29-50
280/29-46
35,7/21004000
35,7/21005000
34.7/17503000
28,6/17503000
28,6/17502750
5
81
93.2
2,4
5
81
93.2
2,4
400/33-883
350/31-1004
40,8/195052503
35,7/185060004
5
83
93.2
2.52
5
81
93.2
2,40
5
81
93.2
2,40
5
81
93.2
2,40
8.5:1
8.5:1
8.5:1
18,0:1
18,0:1
18,0:1
3x1,2
25
0,7
28
0,7
28
–
–
–
–
–
–
2.4
1
No. of cylinders
Bore (mm)
Stroke (mm)
Swept volume (dm3 or litres)
Compression ratio
Spark plugs:
Electrode gap (mm)
Tightening torque (Nm)
1.
2.
3.
4.
2.4D (7CV)
Thailand, Malaysia
France
Applies to manual gearbox M66C
Applies to automatic gearbox AW55-51
ONV
Technical data
Capacities
Engine oil
The oil grade, viscosity and volume specified
in this table can be followed only after
Volume between MIN
– MAX
Engine variant
2.4
B5244S2
0-1,2 litres
BIFUEL
B5244SG
0-1,2 litres
BIFUEL
B5244SG2
0-1,2 litres
2,4
B5244S
0-1,2 litres
2.0T
B5204T5
0-1,2 litres
2.5T5
B5254T2
2.4T
B5244T4
checking that the car does not have an
engine oil decal on the bonnet, see page 216
for location.
Volume1
litres
5.8
ACEA A1/B1
SAE 5W-30
ACEA A3/B3/B4
SAE 0W-30
0-1,2 litres
T5
B5244T5
0-1,2 litres
B5254T4
0-1,2 litres
5.5
6,5
D5
D5244T
0-2.0 litres
2.4D
D5244T2
0-2.0 litres
2.4D
7CV
D5244T34
0-2.0 litres
OOM
Viscosity2
0-1,2 litres
3
R
1.
2.
3.
4.
Recommended oil grade:
Including filter change.
The oil grade requirement must be fulfilled even if a different viscosity is chosen according to the diagram.
Thailand, Malaysia
France
Technical data
If there is an engine oil decal on the bonnet,
the volume and grade specifications in this
table apply. See location on page 216.
Engine variant
2.0T
B5204T5
2.4
B5244S
2.4
B5244S2
2.4T
B5244T43
T5
B5244T5
2.5T
B5254T2
Volume between MIN
– MAX
0-1,2 litres
Volume1
litres
5.5
Recommended oil grade:
ACEA A5/B5
Viscosity2
SAE 0W-30
1. Including filter change.
2. The oil grade requirement must be fulfilled even if a different viscosity is chosen according to the diagram.
3. Thailand, Malaysia
OON
Technical data
Capacities
Extreme driving conditions
Check the oil more often if the car is driven
under extreme conditions, such as driving in
mountains with a lot of engine braking or on
motorways at high speed. There may be
abnormally high oil temperatures or oil
consumption.
Petrol engines
Under extreme operating conditions, choose
a fully synthetic engine oil that provides extra
protection for the engine.
Engine oil decal
1. oil grade
2. viscosity
Engine type designation, component and
serial number can be read on the engine, see
page 216.
OOO
Volvo recommends Castrol® oil products.
Important!
Always use oil of the recommended grade
and correct viscosity.
Never use oil additives. These can
damage the engine.
If the system is topped up with a different
oil, contact the nearest authorised Volvo
workshop for servicing.
Technical data
Other fluids and lubricants
Fluid
Gearbox oil
Coolant
Engine variant/number of components
Manual 5 speed (M56/M58)
Manual 6-speed (M66)
Automatic gearbox (AW55-50, AW55-51)
Petrol engine without turbo
Petrol engine with turbo
Diesel
Air conditioning
Brake fluid
Power steering
Washer fluid
Volume
2.1 litres
2.0 litres
7.2 litres
8.0 litres
9.0 litres
12.5 litres
1000 g
System:
of which reservoir
without high-pressure washing
with high-pressure washing
0.6 litres
0.9 litres
0.2 litres
4.5 litres
6.4 litres
Recommended oil grade:
Transmission fluid: MTF 97309
Transmission fluid JWS 3309
Coolant with corrosion inhibitor mixed with
water, see packaging. The thermostat starts
opening at: 90 ºC in petrol engines and at
82 ºC in diesel engines.
Oil: PAG
Refrigerant R134a (HFC134a)
DOT 4+
Power steering fluid: WSS M2C204-A or
equivalent product.
Use a washer antifreeze recommended by
Volvo mixed with water at temperatures
below freezing.
Important!
The recommended transmission fluid must be used to prevent damage to the gearbox. Do not mix with any other transmission fluid. If the
transmission is topped up with a different fluid, contact an authorised Volvo workshop for servicing.
OOP
Technical data
Fuel
Consumption and emissions
Engine
2.4
B5244S2
BIFUEL
B5244SG
BIFUEL
B5244SG2
2.4
B5244S
2.0T
B5204T5
2.5T
B5254T2
AWD
2.4T
B5244T4
T5
B5244T5
R
B5254T4
D5
D5244T
2.4D
D5244T2
OOQ
Gearbox
Manual 5 speed (M56)
Automatic gearbox (AW55-51)
Manual 5 speed (M56)
Automatic gearbox (AW55-50)
Manual 5 speed (M56)
Automatic gearbox (AW55-50)
Manual 5 speed (M56)
Automatic gearbox (AW55-51)
Manual 5 speed (M56)
Automatic gearbox (AW55-51)
Manual 5 speed (M56)
Automatic gearbox (AW55-51)
Manual 5-speed (M58)
Automatic gearbox (AW55-51)
–
–
Manual 6-speed (M66)
Automatic gearbox (AW55-51)
Manual 6-speed (M66)
Automatic gearbox (AW55-51)
Manual 5 speed (M56)
Automatic gearbox (AW55-50)
Manual 5 speed (M56)
Automatic gearbox (AW55-50)
Consumption
litre/100 km
8,8
9,5
8,7
9.8
9,0
9,5
8,9
9,5
8,9
9,5
9,1
9.8
9,7
10,2
–
–
9,3
9.8
10,5
10,9
6,3
7,5
6,3
7,5
Emissions of CO2
(g/km)
209
226
208
228
214
227
212
226
212
227
217
234
232
244
–
–
220
234
252
261
166
199
167
199
Tank
volume
litres
70
30
30
70
70
70
72
70
70
68
70
70
Technical data
Engine
2.4D
7CV
D5244T3
Consumption
litre/100 km
Gearbox
Manual 5-speed (M56)
Fuel consumption and
emissions of carbon dioxide
Official fuel consumption figures are based
on a standard driving cycle in accordance
with EU Directive 80/1268 comb. Fuel
consumption figures may change if the car is
equipped with extra equipment that affects
the car’s weight. The manner in which the car
is driven and other non-technical factors can
affect fuel consumption. Consumption is
higher and power output lower for fuel with an
octane rating of 91 RON.
6,3
Emissions of CO2
(g/km)
167
Tank
volume
litres
70
Petrol
Most engines can be run with octane ratings
of 91, 95 and 98 RON.
• 91 RON must not be used in 4 cylinder
engines.
• 95 RON can be used for normal driving.
• 98 RON is recommended for maximum
effect and minimum fuel consumption.
When driving in temperatures above +38 ºC,
it is recommended to use fuel with the highest
possible octane rating for optimum
performance and fuel economy.
Petrol:
Standard EN 228.
Diesel:
Standard EN 590
OOR
Technical data
Catalytic converter
Lambda-sondTM oxygen sensor
The Lambda-sond is part of a control system
intended to reduce emissions and improve
fuel economy.
Catalytic converter
The purpose of the catalytic converter is to
purify exhaust gases. It is located in the flow
of exhaust gasses close to the engine so that
it quickly reaches operating temperature.
The catalytic converter consists of a monolith
(ceramic or metal) with channels. The channel
walls are lined with a thin layer of platinum,
rhodium and palladium. These metals act as
catalysts, i.e. they participate in and accelerate a chemical reaction without being used
up themselves.
OOS
An oxygen sensor monitors the oxygen
content of the exhaust gases leaving the
engine. This value is fed into an electronic
system that continuously controls the
injectors. The ratio of air to fuel is continuously
adjusted. These adjustments create optimal
conditions for efficient combustion, and
together with the three-way catalytic
converter reduce harmful emissions (hydrocarbons, carbon monoxide and nitrous
oxides).
Technical data
Electrical system
General
12-V system with voltage regulated AC
generator. Single pole system in which the
chassis and engine block are used as
conductors. The negative pole is connected
to the chassis.
The car is equipped with an extra ground lead
to reduce the magnetic fields.
Battery performance
Voltage
12 V
12 V
12 V
Cold start
capacity
(CCA)
520 A
600 A
8001 A
Reserve
capacity
(RC)
100 min
120 min
170 min
1. Cars equipped with diesel and parking heater.
If the battery is changed, replace it with a
battery of the same cold start capacity and
reserve capacity as the original (see the decal
on the battery).
Alternator
Max. current = 140 A
Starter motor
Output = 1,4/2,2 kW
OOT
Technical data
Electrical system
Bulbs
Lighting
1. Main beam
2. Dipped beam
3. Bi-Xenon
4. Fog lamp, front
4. Fog lamp, front (S60 R)
5. Front position lamps, front parking lamps, front
side marker lamps, rear courtesy lighting
6. Direction indicators, front/rear
7. Direction indicators, side
8. Brake lamp, reversing lamp
9. Rear fog lamp
10. Position lamps, rear,
10. Side marker lamps, rear
11. Number plate lighting, front courtesy lighting,
cargo compartment lighting
12. Vanity mirror
Glovebox lighting
OOU
Output W
Socket
65
55
35
55
55
5
H9
H7
D2R
H1
H3
W 2.1 x 9.5d
21
5
21
4
5
10
5
BAU 15s
W 2.1 x 9.5d
BA15s
BAZ15s
BA15s
BA15s
SV8.5
1,2
3
SV5.5
BA9
A
A/C ....................................................................61
ABS, braking system .................................. 104
Active chassis ......................................... 38, 40
Adaptive system .......................................... 101
Additional heater ............................................68
Air distribution, A/C .......................................62
Air distribution, ECC .....................................64
Air quality system, ECC ................................65
Airbags and inflatable curtains,
inspection ........................................................24
Alarm .................................................................91
Alternator ...................................................... 227
Audio functions, HU-450/650/850 ........ 181
Audio HU-450, overview ........................... 178
Audio HU-650, overview ........................... 179
Audio HU-850, overview ........................... 180
Audio, technical data .................................. 197
Auto, ECC ........................................................63
Automatic gearbox ...................................... 101
Automatic locking ...........................................87
Auxiliary lamps ................................................39
B
Bag holder .......................................................81
Battery ..............................112, 153, 161, 227
Blind Spot (BLIS) ........................................ 126
BLIS - Blind Spot Information
System ....................................................38, 126
Bonnet ........................................................... 155
Booster cushion, integrated ........................ 27
Boot lid, locking ............................................. 39
Brake light .....................................................168
Bulb holder ....................................................168
Bulbs ..............................................................228
C
Carbon dioxide .............................................225
Cargo area ....................................................119
Cargo compartment lighting .....................169
Cassette player, HU-450 ...........................192
Catalytic converter ......................................226
CD changer, external ..................................195
CD changer, internal, HU-850 ..................194
CD player, HU-650 .....................................193
Child safety .............................................. 24, 25
Child safety locks .......................................... 90
Child seat, fitting ..................................... 27, 29
Child seats and side airbags ...................... 19
Cigarette lighter ............................................. 38
Clean inside and out ........................................3
Cleaning seatbelts .......................................147
Cleaning the upholstery .............................147
Cleaning, Car washing ...............................146
Climate control ............................................... 58
Cold start .......................................................101
Collision sensors ........................................... 20
Colour code ..................................................148
Combined instrument panel ........................ 32
Condensation ....................................... 58, 156
Courtesy lighting ......................................... 169
Cruise control .................................................47
D
Deadlocks ................................................ 39, 89
Defroster ..........................................................64
Detectors .........................................................39
Dimensions ................................................... 217
Dipped beam ............................................... 164
Direction indicators ..................................... 165
Display, messages .........................................36
Door mirror defrosters ..................................62
Door mirrors ............................................ 39, 52
Door mirrors, defrosting ...............................45
DSTC ......................................................38, 106
E
ECC ..................................................................58
Economical driving .........................................96
Electrical socket in the rear seat ................48
Electrical system ......................................... 227
Emergency puncture repair ...................... 138
Engine compartment .................................. 155
Engine oil ............................................ 157, 220
Engine oil decal ................................. 216, 222
Engine specifications ................................. 218
Environmental philosophy .............................. 3
Expectant mothers .........................................13
OOV
F
Fan, A/C ...........................................................62
Fan, ECC .........................................................63
Floor mats ........................................................77
Fluids .............................................................. 224
Fog lamp ....................................................... 167
Fog lamps ........................................................41
Front seats, heated ........................................45
Fuel consumption, current ...........................46
Fuel system ................................................... 156
Fuel, refuelling .................................................98
Functions during a call ............................... 205
Fuses ............................................................. 171
G
Gear positions, six-speed .......................... 100
Gear selector inhibitor ............................... 101
Glovebox .................................................. 77, 89
Gross vehicle weight .................................. 217
H
Hazard warning flashers ...............................45
Head restraints, lowering .............................39
Head restraints, rear seat .............................79
Headlamp levelling .........................................41
Headlamp pattern ....................................... 121
Headlamp washer ..........................................43
Headlamp wipers ........................................ 160
Headlamps ............................................41, 163
OPM
Heated front seats ......................................... 61
Heated rear window ..................................... 62
Heating/Cooling, A/C ................................... 61
HU-450, overview ........................................178
HU-650, overview ........................................179
HU-850, overview ........................................180
I
Ignition key ...................................................... 99
IMEI number ..................................................213
Immobiliser ............................................... 84, 99
"Important!" texts ..............................................2
Indicator lamp ................................................. 92
Indicator systems ........................................... 33
Inflatable curtains ........................................... 20
Information display ........................................ 36
Instrument lighting ......................................... 41
Instrument overview, left-hand drive .............6
Instrument overview, right-hand drive ..........8
Integrated booster cushion ......................... 27
Interior .............................................................. 69
Interior lighting ................................................ 73
ISOFIX fixture system ................................... 27
K
Kerb weight ...................................................217
Keys .................................................................. 84
Kick-down ......................................................103
L
Lambda-sond ............................................... 226
Lighting .......................................................... 163
Lighting panel .................................................41
Loading .......................................................... 119
Locking .............................................................86
Lock-up function .......................................... 101
Lowering the backrest, front seat ...............70
Lowering the backrest, rear seat ................79
Lubricants ..................................................... 224
M
Main beam .................................................... 164
N
"Note" texts ....................................................... 2
Number plate lighting ................................. 169
O
Oil filter .......................................................... 157
Oil grade ....................................................... 220
P
PACOS ............................................................17
Paint ............................................................... 148
Paint, colour code ....................................... 148
Paintwork, touching up .............................. 148
Panel vents ......................................................59
Parking ........................................................... 108
Parking assistance .........................................39
Parking brake ..................................................48
Parking heater .................................................67
Parking heater, battery and fuel ..................68
Parking lamps .............................................. 165
Petrol grade .................................................. 225
PI seek ........................................................... 187
Pinch protection, sunroof .............................55
Polishing and waxing .................................. 147
Position lamps ......................................41, 165
Power windows ..............................................50
Privacy handset ........................................... 204
R
Radio functions, general ............................ 184
Radio functions, HU-450 .......................... 185
Radio functions, HU-650/850 ................. 186
Rain sensor ......................................................43
Reading lamp ..................................................73
Rear fog lamp .................................................41
Rear window, defrosting ..............................45
Rearview mirrors, interior ..............................52
Recirculation, A/C ..........................................62
Recirculation, ECC ........................................64
Recommended tyre pressure ................... 132
Recovery ....................................................... 110
Refrigerant .......................................................58
Relay/fuse box ............................................. 172
Remote control ...............................................84
Remote control functions ............................ 85
Remote control, battery replacement ........ 86
RME ................................................................156
Rustproofing, treatment and repair .........150
S
Safety systems, automatic gearbox .........101
Seat, power seat ............................................ 70
Seat, seating position ................................... 70
Seatbelts ......................................................... 12
Service programme .....................................152
Side airbags .................................................... 19
Side direction indicators ............................167
Side marker lamps .......................................166
SIM card ........................................................202
SIM cards, double .......................................213
Slippery driving conditions .......................... 96
Spare wheel ..................................................134
Speed dial .....................................................204
Spots ..............................................................147
SRS system .................................................... 16
SRS, switch .................................................... 18
Stability system .................................... 38, 106
Standby mode, telephone .........................202
Start assistance ...........................................112
Starter motor ................................................227
STC ......................................................... 38, 106
Steering lock ................................................... 99
Steering wheel adjustment .......................... 49
Storage spaces in the passenger
compartment .................................... 75, 76, 78
Storing radio stations ....................... 185, 186
Sunroof .............................................................54
Sunscreen, sunroof .......................................55
Switches in the centre console ..................38
Symbols, warning and indicator .................33
T
Temperature, ECC .........................................63
Towball, removal .......................................... 118
Towbar ................................................. 115, 117
Towing ........................................................... 110
Towing eye ................................................... 110
Trailer ............................................................. 113
Trailer weight ................................................ 217
Trip computer ..................................................46
Tuning, radio ................................................ 184
Type designation ......................................... 216
Tyres, designation of dimensions ............ 130
Tyres, direction of rotation ........................ 133
Tyres, driving characteristics .................... 130
Tyres, speed ratings ................................... 130
Tyres, tread wear indicators ..................... 130
U
Unlocking .........................................................86
OPN
V
Vanity mirror ................................................. 170
Vehicle data .................................................. 152
Viscosity ........................................................ 220
Volume, telephone ...................................... 206
Volvo Cars and the environment .................. 3
W
Warning symbols ...........................................33
"Warning!" texts ............................................... 2
Warning triangle .......................................... 134
Washer fluid ................................................. 158
Washing the car .......................................... 146
Waxing and polishing ................................. 147
Weights ......................................................... 217
Wheels and tyres ........................................ 129
Wheels, fitting .............................................. 137
Wheels, removal .......................................... 136
Whiplash injury ...............................................21
WHIPS .............................................................21
WHIPS and child seat/booster cushion ...21
Windscreen washer ......................................43
Windscreen wipers .......................................43
Winter tyres .................................................. 130
Wiper blades ................................................ 160
OPO
2005
VOLVO
S60 & S60 R
TP 7505 (English). AT 0446. Printed in Sweden, Elanders Infologistics Väst AB, Mölnlycke 2004
OWNER'S MANUAL S60 & S60 R
TP 7505
2005
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement