CSW200ULDM™ CSW200UL™ and CSW200ULST

CSW200UL™ and CSW200ULST™
CSW200UL™ MODELS
High-traffic commercial swing gate operators
CSW200UL™ operators are ideal for high-traffic applications such as
gated communities and commercial buildings. Two available models
each have identical performance features with a choice of exterior
covers. The CSW200UL™ offers a 1⁄4" thick, unbreakable polyethylene
cover for long-lasting protection. The CSW200ULST™ offers a heavy-duty,
16-gauge stainless steel cover finished with an embossed architectural
design. Capabilities include 75 cycles per hour on gates weighing up
to 600 lbs. and up to 18 ft. in length.
CHASSIS
Front view
Side view
CSW200ULST™
14"w x 28"h X 19"d
h"
w"
CSW200UL™
15"w x 28"h X 20.5"d
d"
CSW200ULDM™
CSW200UL1HP™
15"w x 28"h X 24.5"d
Uses LEDs to indicate all input and output
functions of the gate operator.
MODULAR BOARD
High-traffic/high-temperature commercial swing gate operator
Unlike any other swing gate operator, the CSW200ULDM™
features a patented dual motor drive system for superior performance
in hot weather climates such as desert environments. Engineered for
high-traffic commercial applications, the unit is designed to perform
without overheating, using one motor to open the gate and the other
to close it. Capabilities include continuous operation with gates
weighing up to 800 lbs. and up to 18 ft. in length.
ERD
DIGITAL MOTOR
PROTECTION
ELECTRONIC
INPUTS
ELECTRONIC MOTOR
DISCONNECT
TIMER
POWER INPUT
ON/OFF SWITCH
FINISHING
EMERGENCY RELEASE
High-density polyethylene plastic for excellent heat and corrosion resistance.
All metal parts are gold zinc-plated for rustproof protection.
Release handle is standard. Best option is our DC2000™.
OUTPUT SHAFT
2-1/2" cold rolled steel.
If the gate hits a vehicle while closing, it re-opens. If it hits a vehicle
while opening, it stops, reverses 4 to 6 inches and stops again.
90˚opening in 13-15 seconds.
Available Models
CSW200UL™ and CSW200ULST™
Entrapment sensor shuts off the motor after it reaches the stall
amp for 3 seconds, reverses direction for several inches and stops.
MOTOR
1/2 HP, instant reversing, 120V AC, 4 amp,
1,625 rpm, high-speed ball bearings.
Radio receiver, key switch, safety loop, exit loop, telephone entry system,
computer input, fire dept. key switch and 3 push button station.
CYCLES
Capable of 75 cycles per hour.
Prevents activation of the motor while under manual operation.
Meets latest UL325 rev. 5 standards.
Adjustable timer can be set from 0 to 60 seconds.
Controls power input to the board with convenient switch.
CAPABILITIES
SHIPPING WEIGHT
Maximum gate length 18'. Maximum gate weight 600 lbs.
CSW200UL™ - 175 lbs. /194 lbs. - CSW200ULST™
CSW200ULDM™
Board includes electronic power management
with over-current shutdown and automatic recovery.
MOTOR
Equipped with two 1/2 HP, instant reversing, 120V AC, 4 amp,
1,625 rpm, high-speed ball bearings. One motor opens the
gate, the other closes it.
MAGNETIC LOCK
With Omni Option board, magnetic lock system is
incorporated, allowing you to easily add the (MG1300)
electromagnetic locking system to the gate.
CYCLES
Capable of continuous cycles.
BURGLAR ALARM
With Omni Option board, interfaces
with existing home alarm or alarm output.
3 PUSH BUTTON
CONTROL
On-board gate operator control for close, stop and open.
POWER
MANAGEMENT
CSW200UL1HP™
COVER
COMMERCIAL SWING
G AT E O P E R ATO R S
Two 30-to-1 wormgear reducers in an oil bath.
GATE TRAVELING
SPEED
Electrical Specifications
CSW200ULDM™
Constructed with 1/4" sanded, welded and gold zinc-plated sheet metal.
WORMGEAR
REDUCTION
Dimensions
Top view
CSW200UL™ MODELS
Mechanical Specifications
COMMERCIAL SWING
G AT E O P E R ATO R S
CAPABILITIES
Maximum gate length 18'. Maximum gate weight 800 lbs.
SHIPPING WEIGHT
199 lbs.
Heavy-duty, one-horsepower commercial swing gate operator
The CSW200UL1HP™ is our most powerful swing gate operator.
Equipped with two 1⁄2 HP motors and a heavy-duty, 900:1 double
transmission, it is the perfect choice for large, heavy wrought-iron
gates. With 250 lbs. of pulling torque, the unit is capable of
60 cycles per hour on gates weighing up to 1,000 lbs. and up to
20 ft. in length.
INTELLIGENT
MASTER/SECOND
SURGE SUPPRESSOR
ALTERNATE
OUTPUTS
Precise, synchronized movement and communication between
two gate operators using 3-wire RS485 bi-directional technology.
20,000 amps and near lightning protection with modular
Omni surge suppressor. Initial response time: 0.000000000001 second.
MOTOR
Equipped with two 1/2 HP gate motors
that work together equaling one horsepower.
With Omni Option board 3 push button command control,
burglar alarm input and output. QCC option available.
CYCLES
Capable of 60 cycles per hour.
GATE TRAVELING
TIME
SOFT STOP
CSW200UL1HP™
Adjusted by a precision mechanical
device and electrical limit switch system.
Gate travels through the cycle at normal speed and comes to
a stop slowly for more accurate gate cycle. Equipped with
integrated time delay for long mechanical life expectancy.
INTEGRATED LOOP
DETECTORS
Easy to install, modular, plug-in loop
detector inputs for exit loop and safety loop.
CAPABILITIES
Maximum gate length 20'. Maximum gate weight 1,000 lbs.
SHIPPING WEIGHT
7-Year Warranty
199 lbs.
Single home application
120V AC POWER
MOTOR DRIVE
Advanced safety and performance engineering
The OmniControl™ board provides enhanced, reliable performance that meets
or exceeds all UL325 and UL991 specifications. Exclusive to Elite™ commercial
gate operators, this board ensures the equipment you install includes the latest
requirements and most advanced technology in the industry. Additional
performance benefits include easy access to all inputs and outputs, solid-state
motor control, spike suppressors and integrated safety alarm that put Elite™
commercial gate operators in a class by themselves.
5-Year Warranty
Commercial application
Built-in 120V AC power receptacle (NEMA 5-15).
Solid-state electronic motor drive system is incorporated into board.
RADIO RECEIVER
Includes a built-in 312HM radio receiver for use with DIP switch,
billion code and Security+® remote controls. Allows for one LiftMaster®
remote control to conveniently open the gate and additional access points.
ALARM
Activates anytime the moving gate is physically stopped by an obstruction.
UL325 UL991
compliant compliant
THE MOST RELIABLE
C O M M E R C I A L S W I N G G AT E
O P E R AT O R S I N T H E I N D U S T R Y
THE CHAMBERLAIN GROUP, INC.
845 Larch Avenue • Elmhurst, IL 60126
www.chamberlain.com
©2009 The Chamberlain Group, Inc.
Printed in U.S.A., 01/09
ELGBR2UO
Standard features
CSW200UL™ Models
• 120V AC power
Built for high-traffic.
Engineered for safety.
• 24V DC board
• Built-in radio receiver
• Highly efficient,
extremely quiet
• Surge/lightning protection
• Alarm reset button
• Weatherproof high-density
polyethylene cover
• Gold zinc-plated chassis
eliminates corrosion
• High-speed precision
limit switches
• Solid steel,
machined pulley
• #41 chain
CSW200UL™ models of swing gate operators are the first choice for
heavy-traffic applications such as large gated communities, residential
developments, commercial complexes and private estates. Unlike other
systems, the CSW gate operators are designed with a “non-scissor
action” swing arm to greatly reduce the risk of injury. And all models
include the safety and reliability of our OmniControl™ board, the most
advanced control board in the industry.
Featuring the highest quality components and backed by years of
proven dependability, each unit is carefully inspected and mechanically
tested to provide unsurpassed reliability. Unique engineering innovations
in each model also ensure that there’s a CSW to meet practically
every swing gate application.
Dependable. Durable. Capable.
Customizable with added options.
Elite™ operators are skillfully crafted in every detail. Each model features the most advanced
and most complete list of components available in the industry.
CSW200UL™ models of gate operators offer a large choice of accessories to allow you to
create a system specific to your installation needs.
Built-in Radio Receiver
Modular OmniControl™ Board
DC2000™ Power Backup*
Includes a factory-installed 312HM
radio receiver for use with DIP switch,
billion code and Security+® remote
controls. Allows for one LiftMaster®
remote control to conveniently open
the gate and additional access points.
The Omni board uses LEDs to
indicate all input and output
functions of the gate operator and
plug-in loop detector technology.
The DC2000™ keeps the traffic moving during a power outage. It mounts directly
on the machine and is the perfect companion to the system. You will never again
be a prisoner of your own gate.
Soft Stop
Surge/Lightning Protection
Integrated Loop Detector
Gate travels through the cycle at
normal speed and comes to a stop
slowly for more accurate gate cycle.
Equipped with integrated time delay
for long mechanical life expectancy.
The two-stage hybrid network of surge
suppressors protects against lightning
strike within a 50-foot radius, capable of
handling high power with fast response.
Easy to install, modular, plug-in loop detector inputs for exit loop and safety loop.
Alarm Reset Button
Limit Switch Design
Post Mounting Plate
The alarm reset button will instantly
reset the built-in safety alarm siren on
all new OmniControl™ operators,
allowing normal function without
waiting for the alarm status to time out.
The CSW200UL1HP™ is manufactured
with a precision limit switch system. This
system uses high-speed ball bearings and
high-quality components for efficiency
and reliability.
Allows for post mounting of Elite™ commercial gate operators that require
the operator to be elevated off the ground. Mounts using 3" U-bolts or the post
can be welded directly to the plate. Works with all SL3000UL™ and CSW200UL™
commercial gate operator models.
Emergency Release
Non-Scissor Action Arm
Heater*
Release handle is standard. Best
option is our DC2000™. The gate can
be easily disconnected by turning the
release handle. To operate the gate
manually, pull release handle 180º,
then push the gate open.
Most swing gate operator arms
will cross and produce a dangerous
“scissor” action while opening the gate
to a 90° opening. We designed our
CSW200UL™ operator arms to not cross,
eliminating the scissor action .
This feature reduces the risk of
injury from the gate operator arm.
A gearbox heater is available to keep the gearbox running in its optimum
temperature range.
Wormgear Reducer
A highly efficient, extremely quiet,
30-to-1 wormgear reducer is used.
The DC2000™ works with the SL3000UL™ and SL3000ULDM™ slide gate
operators and the CSW200UL™ and CSW200ULDM™ swing gate operators.
Power Hinges
The heavy-duty, super-quiet Power Hinges are manufactured with double
ball bearings each pivoting on a 3/4", grounded and tempered, solid stainless
steel shaft. They are designed for industrial applications such as high-traffic
condominiums and heavy wrought-iron or aluminum gates. Power Hinges
come in three models depending on your needs.
Reversing Sensor
MG1300™ Magnetic Locking System
Instant reversing gate motor(s) uses
high-speed ball bearings for a
smooth and quiet operation. If the
gate is closing and hits a vehicle, the
sensor detects the increased load on
the motor and reverses. If the gate
is opening and hits a vehicle, it stops
and reverses.
The magnetic lock system is incorporated into all of our CSW200UL™
control boards, allowing you to easily add the MG1300™ magnetic locking
system to the gate. The MG1300™ is designed to withstand forces of up
to 1,300 lbs., and unlocks automatically in case of a power failure.
*Available factory installed