Meicheng | SB-8180 | SB-8180 - Extron Electronics

IP Link® De vice Interface
Communication Sheet
mchg_15_4852_1.pke
Revision: 2/14/2011
This document provides additional assistance with wiring your Extron IP Link enabled product to your device.
Different components may require a different wiring scheme than those listed below.
For complete operating instructions, refer to the user's manual for the specific Extron IP Link enabled product or
the controlled device manufacturer supplied documentation.
Device Specifications:
Device Type:
Manufacturer:
Firmware Version:
Model(s):
Matrix Switcher
Meicheng
N/A
SB-8180
Version History:
Driver
Version
Date
1
2/10/2011
IP Link
Compiler
GC
Version
1.4.0
3.0.4
Notes
Initial version.
Driver Notes:
Page 1 of 3
IP Link® De vice Interface
Communication Sheet
mchg_15_4852_1.pke
Control Commands & States:
Input
1-8
Lock
On
Output
1-8
Powe r Control
On
Rese t
Execute
Tie
Execute
Off
Off
Status Available:
No Status available.
MLC62 Supported Commands:
Lock
On
Off
Powe r Control
On
Off
Rese t
Execute
Page 2 of 3
Revision: 2/14/2011
mchg_15_4852_1.pke
IP Link® De vice Interface
Communication Sheet
Revision: 2/14/2011
Cable and Adapter Requirements:
M/F RS232 Serial Cable (Extron Electronics P/N 26-433-XX)
Notes for the Device:
Serial communication:
Port Type : RS-232
Baud Rate: 9600
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
Pin Assignments Diagram:
Note: Captive screw connector may also be used as a serial connection.
General Notes:
Page 3 of 3
Download PDF