JVC KENWOOD KD-R497 Instruction Manual
PDF
Download
Document
Advertisement
Advertisement
РУCCKИЙ KD-R497 CD-PECИBEP ИHCTPУKЦИЯ ПO ЭKCПЛУATAЦИИ B5A-2122-00 [Q] JS_JVC_KD_R497_Q_C.indd 1 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 7/10/2017 9:39:32 AM Маркировка изделий, использующих лазеры К корпусу устройства прикреплена табличка, указывающая, что устройство использует лазерные лучи класса 1. Это означает, что в устройстве используются лазерные лучи слабой интенсивности. Они не представляют опасности и не распространяют опасную радиацию вне устройства. Декларация соответствия относительно Директивы RE 2014/53/EU Декларация соответствия относительно Директивы RoHS 2011/65/EU Производитель: JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN Представительство в ЕС: JVCKENWOOD Deutschland GmbH Konrad-Adenauer-Allee 1-11, 61118 Bad Vilbel, GERMANY English Hereby, JVCKENWOOD declares that the radio equipment “KD-R497” is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.jvc.net/cs/car/eudoc/ Español Por la presente, JVCKENWOOD declara que el equipo de radio “KD-R497” cumple la Directiva 2014/53/EU. El texto completo de la declaración de conformidad con la UE está disponible en la siguiente dirección de internet: http://www.jvc.net/cs/car/eudoc/ Français Par la présente, JVCKENWOOD déclare que l’équipement radio « KD-R497 » est conforme à la directive 2014/53/UE. L’intégralité de la déclaration de conformité UE est disponible à l’adresse Internet suivante : http://www.jvc.net/cs/car/eudoc/ Português Deste modo, a JVCKENWOOD declara que o equipamento de rádio “KD-R497” está em conformidade com a Diretiva 2014/53/UE. O texto integral da declaração de conformidade da UE está disponível no seguinte endereço de internet: http://www.jvc.net/cs/car/eudoc/ Deutsch Hiermit erklärt JVCKENWOOD, dass das Funkgerät “KD-R497” der Richtlinie 2014/53/EU entspricht. Der volle Text der EU-Konformitätserklärung steht unter der folgenden Internetadresse zur Verfügung: http://www.jvc.net/cs/car/eudoc/ Polska Niniejszym, JVCKENWOOD deklaruje, że sprzęt radiowy “KD-R497” jest zgodny z dyrektywą 2014/53/UE. Pełny tekst deklaracji zgodności EU jest dostępny pod adresem: http://www.jvc.net/cs/car/eudoc/ Nederlands Hierbij verklaart JVCKENWOOD dat de radioapparatuur “KD-R497” in overeenstemming is met Richtlijn 2014/53/EU. De volledige tekst van de EU-verklaring van overeenstemming is te vinden op het volgende internetadres: http://www.jvc.net/cs/car/eudoc/ Český Společnost JVCKENWOOD tímto prohlašuje, že rádiové zařízení “KD-R497” splňuje podmínky směrnice 2014/53/EU. Plný text EU prohlášení o shodě je dostupný na následující internetové adrese: http://www.jvc.net/cs/car/eudoc/ Italiano Con la presente, JVCKENWOOD dichiara che l΄apparecchio radio “KD-R497” è conforme alla Direttiva 2014/53/UE. Il testo integrale della dichiarazione di conformità UE è disponibile al seguente indirizzo internet: http://www.jvc.net/cs/car/eudoc/ Magyar JVCKENWOOD ezennel kijelenti, hogy a „KD-R497“ rádióberendezés megfelel a 2014/53/EU irányelvnek. Az EU konformitási nyilatkozat teljes szövege az alábbi weboldalon érhető el: http://www.jvc.net/cs/car/eudoc/ i JS_JVC_KD_R497_Q_C.indd i Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 7/10/2017 9:39:33 AM Svenska Härmed försäkrar JVCKENWOOD att radioutrustningen “KD-R497” är i enlighet med direktiv 2014/53/EU. Den fullständiga texten av EU-försäkran om överensstämmelse finns på följande Internetadress : http://www.jvc.net/cs/car/eudoc/ Suomi JVCKENWOOD julistaa täten, että radiolaite “KD-R497” on direktiivin 2014/53/EU mukainen. EU-vaatimustenmukaisuusvakuutusvaatimus löytyy kokonaisuudessaan seuraavasta internetosoitteesta: http://www.jvc.net/cs/car/eudoc/ Slovensko S tem JVCKENWOOD izjavlja, da je radijska oprema »KD-R497« v skladu z Direktivo 2014/53/EU. Celotno besedilo direktive EU o skladnosti je dostopno na tem spletnem naslovu: http://www.jvc.net/cs/car/eudoc/ Slovensky Spoločnosť JVCKENWOOD týmto vyhlasuje, že rádiové zariadenie „KD-R497“ vyhovuje smernici 2014/53/EÚ. Celý text EÚ vyhlásenia o zhode nájdete na nasledovnej internetovej adrese: http://www.jvc.net/cs/car/eudoc/ Dansk Herved erklærer JVCKENWOOD, at radioudstyret “KD-R497” er i overensstemmelse med Direktiv 2014/53/EU. EU-overensstemmelseserklæringens fulde ordlyd er tilgængelig på følgende internetadresse: http://www.jvc.net/cs/car/eudoc/ Lietuviškai Šiuo JVCKENWOOD pažymi, kad radijo įranga „KD-R497“ atitinka 2014/53/EB direktyvos reikalavimus. Visą EB direktyvos atitikties deklaracijos tekstą galite rasti šiuo internetiniu adresu: http://www.jvc.net/cs/car/eudoc/ Ελληνικά Με το παρόν, η JVCKENWOOD δηλώνει ότι ο ραδιοεξοπλισμός «KD-R497» συμμορφώνεται με την Οδηγία 2014/53/ΕΕ. Το πλήρες κείμενο της δήλωσης συμμόρφωσης της ΕΕ είναι διαθέσιμο στην ακόλουθη διεύθυνση στο διαδίκτυο: http://www.jvc.net/cs/car/eudoc/ Malti B’dan, JVCKENWOOD jiddikjara li t-tagħmir tar-radju “KD-R497” huwa konformi mad-Direttiva 2014/53/UE. It-test kollu tad-dikjarazzjoni ta’ konformità huwa disponibbli fl-indirizz intranet li ġej: http://www.jvc.net/cs/car/eudoc/ Eesti Käesolevaga JVCKENWOOD kinnitab, et „KD-R497“ raadiovarustus on vastavuses direktiiviga 2014/53/EL. ELi vastavusdeklaratsiooni terviktekst on kättesaadav järgmisel internetiaadressil: http://www.jvc.net/cs/car/eudoc/ Latviešu JVCKENWOOD ar šo deklarē, ka radio aparatūra „KD-R497” atbilst direktīvas 2014/53/ES prasībām. Pilns ES atbilstības deklarācijas teksts ir pieejams šādā tīmekļa adresē: http://www.jvc.net/cs/car/eudoc/ HRVATSKI / SRPSKI JEZIK JVCKENWOOD ovim izjavljuje da je radio oprema “KD-R497” u skladu s Direktivom 2014/53/EU. Cjeloviti tekst deklaracije Europske unije o usklađenosti dostupan je na sljedećoj internet adresi: http://www.jvc.net/cs/car/eudoc/ ROMÂNĂ Prin prezenta, JVCKENWOOD declară că echipamentul radio “KD-R497” este în conformitate cu Directiva 2014/53/UE. Textul integral al declarației de conformitate UE este disponibil la urmatoarea adresă de internet: http://www.jvc.net/cs/car/eudoc/ БЪЛГАРСКИ С настоящото JVCKENWOOD декларира, че радиооборудването на “KD-R497” е в съответствие с Директива 2014/53/ЕС. Пълният текст на ЕС декларацията за съответствие е достъпен на следния интернет адрес: http://www.jvc.net/cs/car/eudoc/ Turkish Burada, JVCKENWOOD “KD-R497” radyo ekipmanının 2014/53/AB Direktifine uygun olduğunu bildirir. AB uyumluluk deklarasyonunun tam metni aşağıdaki internet adresinde mevcuttur. http://www.jvc.net/cs/car/eudoc/ Русский JVCKENWOOD настоящим заявляет, что радиооборудование «KD-R497» соответствует Директиве 2014/53/EU. Полный текст декларации соответствия ЕС доступен по следующему адресу в сети Интернет: http://www.jvc.net/cs/car/eudoc/ Українська Таким чином, компанія JVCKENWOOD заявляє, що радіообладнання «KD-R497» відповідає Директиві 2014/53/EU. Повний текст декларації про відповідність ЄС можна знайти в Інтернеті за такою адресою: http://www.jvc.net/cs/car/eudoc/ ii JS_JVC_KD_R497_Q_C.indd ii Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 7/10/2017 9:39:33 AM CONTENTS BEFORE USE BEFORE USE 2 BASICS 3 GETTING STARTED 4 1 Cancel the demonstration 2 Set the clock and date 3 Set the basic settings IMPORTANT • To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe Warning and Caution in this manual. • Please keep the manual in a safe and accessible place for future reference. WARNING • Do not operate any function that takes your attention away from safe driving. RADIO 5 CD/USB/ANDROID 7 AUX 9 AUDIO SETTINGS 9 DISPLAY SETTINGS 12 REFERENCES 13 Maintenance More information TROUBLESHOOTING 14 INSTALLATION/ CONNECTION 15 SPECIFICATIONS 18 Caution Volume setting: • Adjust the volume so that you can hear sounds outside the car to prevent accidents. • Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level. General: • Avoid using the external device if it might hinder safe driving. • Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data. • Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short circuit. • If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate. How to read this manual • Operations are explained mainly using buttons on the faceplate. • English indications are used for the purpose of explanation. You can select the display language from the menu. ( 5) • [XX] indicates the selected items. • ( XX) indicates references are available on the stated page. 2 ENGLISH JS_JVC_KD_R497_Q_EN_2.indd 2 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 7/17/2017 3:26:11 PM BASICS Faceplate Attach Volume knob Loading slot Detach How to reset Display window Detach button Your preset adjustments will be erased except stored radio stations. To On the faceplate Turn on the power Press . • Press and hold to turn off the power. Adjust the volume Turn the volume knob. Press the volume knob to mute the sound or pause playback. • Press again to cancel. The volume level returns to the previous level before muting or pause. Select a source • Press • Press Change the display information Press repeatedly. , then turn the volume knob within 2 seconds. repeatedly. ( 14) ENGLISH JS_JVC_KD_R497_Q_EN_2.indd 3 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 3 7/17/2017 3:26:14 PM GETTING STARTED 3 Set the basic settings . 1 Press and hold 2 Turn the volume knob to select an item (see the following table), then press the knob. 1 3 Repeat step 2 until the desired item is selected or activated. 4 Press to exit. Cancel the demonstration To return to the previous setting item, press . When you turn on the power (or after you reset the unit), the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB” 1 Press the volume knob. [YES] is selected for the initial setup. ON: Activates the keypress tone. ; OFF: Deactivates. KEY BEEP 2 Press the volume knob again. SOURCE SELECT “DEMO OFF” appears. 2 Default: XX SYSTEM Set the clock and date . 1 Press and hold 2 Turn the volume knob to select [CLOCK], then press the knob. To adjust the clock 3 Turn the volume knob to select [CLOCK ADJUST], then press the knob. 4 Turn the volume knob to make the settings, then press the knob. Hour Minute 5 Turn the volume knob to select [CLOCK FORMAT], then press the knob. 6 Turn the volume knob to select [12H] or [24H], then press the knob. AM SRC* ON: Enables AM in source selection. ; OFF: Disables. ( 5) BUILT-IN AUX* ON: Enables AUX in source selection. ; OFF: Disables. ( 9) F/W UPDATE UPDATE SYSTEM F/W UP xxxx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated). For details on how to update the firmware, visit: <http://www.jvc.net/cs/car/>. * Not displayed when the corresponding source is selected. To set the date 7 Turn the volume knob to select [DATE SET], then press the knob. 8 Turn the volume knob to make the settings, then press the knob. Day Month Year 9 Press to exit. To return to the previous setting item, press 4 . ENGLISH JS_JVC_KD_R497_Q_EN_2.indd 4 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 7/17/2017 3:26:15 PM GETTING STARTED RADIO CLOCK TIME SYNC ON: The clock time is automatically set using the Clock Time (CT) data in FM Radio Data System signal. ; OFF: Cancels. CLOCK DISPLAY ON: The clock time is shown on the display even when the unit is turned off. ; OFF: Cancels. ENGLISH РУССКИЙ ESPANOL Select the display language for menu and music information if applicable. By default, РУССКИЙ is selected. “STEREO” lights up when receiving an FM stereo broadcast with sufficient signal strength. Search for a station 1 Press 2 Press repeatedly to select FM-LO, FM or AM. to search for a station automatically. (or) Press and hold station manually. until “M” flashes, then press repeatedly to search for a Settings in memory You can store up to 12 stations for FM, 6 stations for FM-LO and 6 stations for AM. Store a station While listening to a station.... Press and hold one of the number buttons (1 to 6). (or) 1 Press and hold the volume knob until “PRESET MODE” flashes. 2 Turn the volume knob to select a preset number, then press the knob. The preset number flashes and “MEMORY” appears. Select a stored station Press one of the number buttons (1 to 6). (or) 1 Press . 2 Turn the volume knob to select a preset number, then press the knob. ENGLISH JS_JVC_KD_R497_Q_EN_2.indd 5 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 5 7/17/2017 3:26:16 PM RADIO IF BAND AUTO: Increases the tuner selectivity to reduce interference noises from adjacent FM/FM-LO stations. (Stereo effect may be lost.) ; WIDE: Subjects to interference noises from adjacent FM/FM-LO stations, but sound quality will not be degraded and the stereo effect will remain. 3 Repeat step 2 until the desired item is selected/activated or follow MONO SET the instructions stated on the selected item. 4 Press to exit. ON: Improves the FM reception, but the stereo effect will be lost. ; OFF: Cancels. NEWS SET*2 ON: The unit will temporarily switch to News Programme if available. ; OFF: Cancels. REGIONAL*2 ON: Switches to another station only in the specific region using the “AF” control. ; OFF: Cancels. AF SET*2 ON: Automatically searches for another station broadcasting the same program in the same Radio Data System network with better reception when the current reception is poor. ; OFF: Cancels. TI ON: Allows the unit to temporarily switch to Traffic Information if available (“TI” lights up) while listening to all sources except in FM-LO/ AM. ; OFF: Cancels. PTY SEARCH *2 Select a PTY code (see below). If there is a station broadcasting a program of the same PTY code as you have selected, that station is tuned in. Other settings . 1 Press and hold 2 Turn the volume knob to select an item (see the following table), then press the knob. To return to the previous setting item, press . Default: XX TUNER SETTING RADIO TIMER Turns on the radio at a specific time regardless of the current source. 1 ONCE/DAILY/WEEKLY/OFF: Select how often the timer will be turned on. 2 FM/FM-LO/AM: Select the band. 3 01 to 12 (for FM)/01 to 06 (for FM-LO/AM): Select the preset station. 4 Set the activation day *1 and time. “M” lights up when complete. Radio Timer will not activate for the following cases. • The unit is turned off. • [OFF] is selected for [AM SRC] in [SOURCE SELECT] after Radio Timer for AM is selected. ( 4) SSM FM: SSM 01–06/SSM 07–12; FM-LO: SSM 01–06: Automatically presets up to 12 stations for FM and 6 stations for FM-LO. “SSM” stops flashing when the first 6 stations are stored. Select SSM 07–12 to store the following 6 stations for FM. LOCAL SEEK ON: Searches only FM/FM-LO stations with good reception. ; OFF: Cancels. • Settings made are applicable only to the selected source/station. Once you change the source/station, you need to make the settings again. 6 *1 Selectable only when [ONCE] or [WEEKLY] is selected in step 1. *2 Only for FM source. PTY code NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, POP M (music), ROCK M (music), EASY M (music), LIGHT M (music), CLASSICS, OTHER M (music), WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M (music), OLDIES, FOLK M (music), DOCUMENT ENGLISH JS_JVC_KD_R497_Q_EN_2.indd 6 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 7/17/2017 3:26:17 PM CD/USB/ANDROID Start playback The source changes automatically and playback starts. CD Label side Eject disc USB input terminal USB USB 2.0 cable*1 (commercially available) ANDROID*2 USB cable*1 (commercially available) To directly select USB/ANDROID source, press USB. To On the faceplate Reverse/ Fast-forward*3 Press and hold . Select a track/file Press . Select a folder*4 Press . Repeat play*3 Press repeatedly. TRACK REPEAT/ALL REPEAT : Audio CD TRACK REPEAT/FOLDER REPEAT/ALL REPEAT : MP3/WMA/WAV/FLAC file ONE REPEAT/ALL REPEAT/REPEAT OFF : ANDROID Random play*3 Press repeatedly. ALL RANDOM/RANDOM OFF : Audio CD FOLDER RANDOM/ALL RANDOM/RANDOM OFF : MP3/WMA/WAV/FLAC file SONG RANDOM/ALL RANDOM/RANDOM OFF : ANDROID *1 Do not leave the cable inside the car when not using. *2 When connecting an Android device, “Press [VIEW] to install JVC MUSIC PLAY APP” is shown. Follow the instructions to install the application. You can also install the latest version of JVC MUSIC PLAY application on your Android device before connecting. For more information, visit <http://www.jvc.net/cs/car/>. 3 * For ANDROID: Applicable only when [AUTO MODE] is selected. ( 8) *4 For CD: Only for MP3/WMA files. This does not work for ANDROID. ENGLISH JS_JVC_KD_R497_Q_EN_2.indd 7 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 7 7/17/2017 3:26:17 PM CD/USB/ANDROID Select control mode Select a file from a folder/list While in ANDROID source, press repeatedly. AUTO MODE : Control Android device from this unit via JVC MUSIC PLAY application installed in the Android device. AUDIO MODE : Control Android device using the Android device itself via other media player applications installed in the Android device. However, you can still play/pause or file skip from this unit. 1 Press . 2 Turn the volume knob to select a folder/list, then press the knob. 3 Turn the volume knob to select a file, then press the knob. Quick search If you have many files, you can search through them quickly. Turn the volume knob quickly to browse through the list quickly. Select music drive While in USB source, press For ANDROID, applicable only when [AUTO MODE] is selected. repeatedly. Stored songs in the following drive will be played back. • Selected internal or external memory of a smartphone (Mass Storage Class). • Selected drive of a multiple drives device. Alphabet search (applicable only for ANDROID source) You can search for a file according to the first character. 1 Press to enter character search. 2 Turn the volume knob to select the desired character. ^A^ : Upper case letters (A to Z) _A_ : Lower case letters (a to z) -0: Numbers (0 to 9) -OTHERS- : Character other than A to Z, 0 to 9 3 Press the volume knob to start searching. • To return to the previous setting item, press • To cancel, press and hold . 8 . ENGLISH JS_JVC_KD_R497_Q_EN_2.indd 8 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 7/17/2017 3:26:18 PM AUX AUDIO SETTINGS Use a portable audio player 1 Connect a portable audio player (commercially available). 3.5 mm stereo mini plug with “L” shaped connector (commercially available) Portable audio player Auxiliary input jack 2 Select [ON] for [BUILT-IN AUX] in [SOURCE SELECT]. ( 4) 3 Press repeatedly to select AUX. 4 Turn on the portable audio player and start playback. Use a 3-core plug head stereo mini plug for optimum audio output. Select a preset equalizer directly Press (or) Press repeatedly. , then turn the volume knob within 5 seconds. Preset equalizer: FLAT (default)/DRVN 3/DRVN 2/DRVN 1/HARD ROCK/HIP HOP/JAZZ/POP/R&B/TALK/ USER/VOCAL BOOST/BASS BOOST/CLASSICAL/DANCE • Drive equalizer (DRVN 3/DRVN 2/DRVN 1) boosts specific frequencies in the audio signal to reduce the noise heard from outside the car or running noise of the tyres. Store your own sound settings to enter EASY EQ setting. 1 Press and hold 2 Turn the volume knob to select an item, then press the knob. Refer to [EASY EQ] ( 10) for setting and the result is stored to [USER]. . • To return to the previous setting item, press • To exit, press . Other settings . 1 Press and hold 2 Turn the volume knob to select an item ( 10), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. to exit. 4 Press To return to the previous setting item, press . ENGLISH JS_JVC_KD_R497_Q_EN_2.indd 9 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 9 7/17/2017 3:26:18 PM AUDIO SETTINGS Default: XX EQ SETTING PRESET EQ EASY EQ PRO EQ Select a preset equalizer suitable to the music genre. • Select [USER] to use the settings made in [EASY EQ] or [PRO EQ]. FLAT/DRVN 3/DRVN 2/DRVN 1/HARD ROCK/HIP HOP/JAZZ/POP/R&B/ TALK/USER/VOCAL BOOST/BASS BOOST/CLASSICAL/DANCE Adjust your own sound settings. • The settings are stored to [USER]. • The settings made may affect the current settings of [PRO EQ]. SUB.W SP *1*2 : 00 to +06 (Default: +03 SUB.W *1*3 : –08 to +08 00 BASS : LVL–06 to LVL+06 LVL 00 MID : LVL–06 to LVL+06 LVL 00 TRE : LVL–06 to LVL+06 LVL 00) BASS BOOST LEVEL +01 to LEVEL +05 (LEVEL +01): Selects your preferred bass boost level. ; OFF: Cancels. LOUDNESS LEVEL 01/LEVEL 02: Boosts low or high frequencies to produce a well-balanced sound at low volume. ; OFF: Cancels. SUB.W LEVEL *1 SPK-OUT *2 SUB.W 00 to SUB.W +06 (SUB.W +03): Adjusts the output level of the subwoofer connected via speaker lead. ( 17) PRE-OUT *3 SUB.W –08 to SUB.W +08 (SUB.W 00): Adjusts the output level of the subwoofer connected to the lineout terminals (REAR/SW) through an external amplifier. ( 17) SUBWOOFER SET *3 ON: Turns on the subwoofer output. ; OFF: Cancels. Adjust your own sound settings. • The settings are stored to [USER]. • The settings made may affect the current settings of [EASY EQ]. SUBWOOFER LPF *1 FRQ THROUGH: All signals are sent to the subwoofer. ; FRQ 55HZ/FRQ 85HZ/FRQ 120HZ: Audio signals with frequencies lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer. 1 BASS/MIDDLE/TREBLE: Select a sound tone. 2 Adjust the sound elements of the selected sound tone. BASS Frequency : 60HZ/80HZ/100HZ/200HZ Level : LVL–06 to LVL+06 Q : Q1.0/Q1.25/Q1.5/Q2.0 (Default : 80HZ/LVL 00/Q1.0) SUB.W PHASE *4 REVERSE (180°)/NORMAL (0°): Selects the phase of the subwoofer output to be in line with the speaker output for optimum performance. FADER POSITION R06 to POSITION F06 (POSITION 00): Adjusts the front and rear speaker output balance. BALANCE *5 POSITION L06 to POSITION R06 (POSITION 00): Adjusts the left and right speaker output balance. MIDDLE TREBLE 10 AUDIO CONTROL Frequency Level Q (Default : : : : 0.5KHZ/1.0KHZ/1.5KHZ/2.5KHZ LVL–06 to LVL+06 Q0.75/Q1.0/Q1.25 1.0KHZ/LVL 00/Q1.25) Frequency Level Q (Default : : : : 10.0KHZ/12.5KHZ/15.0KHZ/17.5KHZ LVL–06 to LVL+06 Q FIX 10.0KHZ/LVL 00/Q FIX) *1 Displayed only when [SUBWOOFER SET] is set to [ON]. *2 Displayed only when [SPK/PRE OUT] is set to [SUB.W/SUB.W]. ( 11) *3 Displayed only when [SPK/PRE OUT] is set to [REAR/SUB.W] or [SUB.W/SUB.W]. ( 11) *4 Selectable only if a setting other than [FRQ THROUGH] is selected for [SUBWOOFER LPF]. 5 * This adjustment will not affect the subwoofer output. ENGLISH JS_JVC_KD_R497_Q_EN_2.indd 10 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 7/17/2017 3:26:20 PM AUDIO SETTINGS VOLUME ADJUST AMP GAIN LEVEL –15 to LEVEL +06 (LEVEL 00): Preset the initial volume level of each source (compared to the FM volume level). Before adjustment, select the source you want to adjust. (“VOL ADJ FIX” appears if FM is selected.) LOW POWER: Limits the maximum volume level to 25. (Select if the maximum power of each speaker is less than 50 W to prevent damaging the speakers.) ; HIGH POWER: The maximum volume level is 35. D.T.EXPANDER (Digital Track Expander) ON: Creates realistic sound by compensating the high-frequency components and restoring the rise-time of the waveform that are lost in audio data compression. ; OFF: Cancels. SPK/PRE OUT Select the appropriate setting to get the desired output. ( Speaker output settings) Speaker output settings Connection via speaker leads For connections without using an external amplifier. However, with this settings you can also enjoy the subwoofer output. ( 17) Audio signal through rear speaker lead Setting on [SPK/PRE OUT] L (left) R (right) REAR/REAR Rear speakers output Rear speakers output REAR/SUB.W Rear speakers output Rear speakers output SUB.W/SUB.W Subwoofer output (Mute) If [SUB.W/SUB.W] is selected: – [FRQ 120HZ] is selected in [SUBWOOFER LPF] and [FRQ THROUGH] is not available. ( 10) – [POSITION R01] is selected in [FADER] and selectable range is [POSITION R06] to [POSITION 00]. ( 10) Select the output setting for the speakers [SPK/PRE OUT], base on the speaker connection method. Connection via lineout terminals For connections through an external amplifier. ( 17) Audio signal through lineout terminal Setting on [SPK/PRE OUT] REAR/REAR REAR/SW Rear speakers output REAR/SUB.W (default) Subwoofer output SUB.W/SUB.W Subwoofer output ENGLISH JS_JVC_KD_R497_Q_EN_2.indd 11 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 11 7/17/2017 3:26:20 PM DISPLAY SETTINGS 1 Press and hold . 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. 4 Press to exit. To return to the previous setting item, press BRIGHTNESS Set the brightness for day and night separately. 1 DAY/NIGHT: Select day or night. 2 Select a zone. (See the illustration.) 3 LEVEL 00 to LEVEL 31: Set the brightness level. TEXT SCROLL *2 SCROLL ONCE: Scrolls the display information once. ; SCROLL AUTO: Repeats scrolling at 5-second intervals. ; SCROLL OFF: Cancels. *1 The illumination control wire connection is required. ( 17) *2 Some characters or symbols will not be shown correctly (or will be blanked). . Default: XX DISPLAY DIMMER 12 Dim the illumination. OFF: Dimmer is turned off. Brightness changes to [DAY] setting. ON: Dimmer is turned on. Brightness changes to [NIGHT] setting. ( [BRIGHTNESS]) DIMMER TIME: Set the dimmer on and off time. 1 Turn the volume knob to adjust the [ON] time, then press the knob. 2 Turn the volume knob to adjust the [OFF] time, then press the knob. (Default: [ON]: 18:00 ; [OFF]: 6:00) DIMMER AUTO: Dimmer turns on and off automatically when you turn off or on the car headlights. *1 ENGLISH JS_JVC_KD_R497_Q_EN_2.indd 12 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 7/17/2017 3:26:21 PM REFERENCES Maintenance Cleaning the unit Wipe off dirt on the faceplate with a dry silicone or soft cloth. Cleaning the connector Detach the faceplate and clean the connector gently with a cotton swab, being careful not to damage the connector. Connector (on the reverse Handling discs: side of the faceplate) • Do not touch the recording surface of the disc. • Do not stick tape etc. on the disc, or use a disc with tape stuck on it. • Do not use any accessories for the disc. • Clean from the center of the disc and move outward. • Clean the disc with a dry silicone or soft cloth. Do not use any solvents. • When removing discs from this unit, pull them out horizontally. • Remove burrs from the center hole and disc edge before inserting a disc. More information For: – Latest firmware updates and latest compatible item list – Any other latest information Visit <http://www.jvc.net/cs/car/>. General • This unit can only play the following CDs: Playable files • Playable audio file: For disc: MP3 (.mp3), WMA (.wma) For USB mass storage class device: MP3 (.mp3), WMA (.wma), WAV (.wav), FLAC (.flac) • Playable disc media: CD-R/CD-RW/CD-ROM • Playable disc file format: ISO 9660 Level 1/2, Joliet, Long file name. • Playable USB device file system: FAT12, FAT16, FAT32 Even when audio files comply with the standards listed above, playback may be impossible depending on the types or conditions of media or device. Unplayable discs • Discs that are not round. • Discs with coloring on the recording surface or discs that are dirty. • Recordable/ReWritable discs that have not been finalized. • 8 cm CD. Attempting to insert using an adapter may cause malfunction. About USB devices • You cannot connect a USB device via a USB hub. • Connecting a cable whose total length is longer than 5 m may result in abnormal playback. • This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1 A. About Android device • This unit supports Android OS 4.1 and above. • Some Android devices (with OS 4.1 and above) may not fully support Android Open Accessory (AOA) 2.0. • If the Android device supports both mass storage class device and AOA 2.0, this unit always playback via AOA 2.0 as priority. • This unit can play back multi-session discs; however, unclosed sessions will be skipped during playback. • DualDisc playback: The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio” standard. Therefore, the use of Non-DVD side of a DualDisc on this product cannot be recommended. • For detailed information and notes about the playable audio files, visit <http://www.jvc.net/cs/car/>. ENGLISH JS_JVC_KD_R497_Q_EN_2.indd 13 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 13 7/17/2017 3:26:21 PM TROUBLESHOOTING REFERENCES Change the display information Each time you press , the display information changes. • If the information is unavailable or not recorded, “NO TEXT”, “NO NAME”, or other information (eg. station name) appears or display will be blank. Display information FM/FM-LO/AM Frequency Clock (back to the beginning) (For FM Radio Data signal only) Station name (PS)/Program type (PTY) Radio text Radio text+ title/Radio text+ artist Frequency (back to the beginning) (For CD-DA) Disc title/Artist Track title/Artist (back to the beginning) Playing time Radio text+ Clock Radio CD or USB Clock (For MP3/WMA/WAV/FLAC files) Song title/Artist Album name/Artist Folder name File name Playing time Clock (back to the beginning) AUX When [AUTO MODE] is selected ( 8): Song title/Artist Album name/Artist Playing time (back to the beginning) AUX Clock Available Cyrillic letters Available characters Display indications (back to the beginning) Clock CD/USB ANDROID Remedy Sound cannot be heard. General Source name Symptom • Adjust the volume to the optimum level. • Check the cords and connections. “MISWIRING CHECK WIRING THEN PWR ON” appears. Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again. “PROTECTING SEND SERVICE” appears. Send the unit to the nearest service center. Source cannot be selected. Check the [SOURCE SELECT] setting. ( 4) • Radio reception is poor. • Static noise while listening to the radio. Connect the antenna firmly. Disc cannot be ejected. Press and hold to forcibly eject the disc. Be careful not to drop the disc when it is ejected. “IN DISC” appears. Make sure nothing is blocking the loading slot when you eject the disc. “PLEASE EJECT” appears. Press , then insert the disc correctly. Playback order is not as intended. The playback order is determined by the file name (USB) or the order in which files were recorded (disc). Elapsed playing time is not correct. This depends on the recording process earlier. “NOT SUPPORT” appears and track skips. Check whether the track is a playable format. ( 13) “READING” keeps flashing. • Do not use too many hierarchical levels and folders. • Reload the disc or reattach the USB device. “CANNOT PLAY” flashes and/or connected device cannot be detected. 14 • Check whether the connected device is compatible with this unit and ensure the files are in supported formats. ( 13) • Reattach the device. ENGLISH JS_JVC_KD_R497_Q_EN_2.indd 14 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 7/17/2017 3:26:21 PM INSTALLATION/CONNECTION TROUBLESHOOTING CD/USB Symptom Remedy Correct characters are not displayed. • This unit can only display uppercase letters, numbers, and a limited number of symbols. • Depending on the display language you have selected ( 5), some characters may not be displayed correctly. • Sound cannot be heard during playback. • Sound output only from the Android device. • Reconnect the Android device. • If in [AUDIO MODE], launch any media player application on the Android device and start playback. • If in [AUDIO MODE], relaunch the current media player application or use another media player application. • Restart the Android device. • If this does not solve the problem, the connected Android device is unable to route the audio signal to unit. ( 13) ANDROID Cannot playback at [AUTO MODE]. • Make sure JVC MUSIC PLAY APP is installed on the Android device. ( 7) • Reconnect the Android device and select the appropriate control mode. ( 8) • If this does not solve the problem, the connected Android device does not support [AUTO MODE]. ( 13) “NO DEVICE” or “READING” • Switch off the developer options on the Android device. keeps flashing. • Reconnect the Android device. • If this does not solve the problem, the connected Android device does not support [AUTO MODE]. ( 13) Playback is intermittent or sound skips. “CANNOT PLAY” Turn off the power saving mode on the Android device. • Make sure Android device contains playable audio files. • Reconnect the Android device. • Restart the Android device. Warning • The unit can only be used with a 12 V DC power supply, negative ground. • Disconnect the battery’s negative terminal before wiring and mounting. • Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire (black) to prevent a short circuit. • To prevent short circuit: – Insulate unconnected wires with vinyl tape. – Be sure to ground this unit to the car’s chassis again after installation. – Secure the wires with cable clamps and wrap vinyl tape around the wires that comes into contact with metal parts to protect the wires. Caution • For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer. • Install this unit in the console of your vehicle. Do not touch the metal parts of this unit during and shortly after use of the unit. Metal parts such as the heat sink and enclosure become hot. • Do not connect the wires of speakers to the car chassis or Ground wire (black), or connect them in parallel. • Connect speakers with a maximum power of more than 50 W. If the maximum power of the speakers is lower than 50 W, change the [AMP GAIN] setting to avoid damaging the speakers. ( 11) • Mount the unit at an angle of less than 30º. • If your vehicle wiring harness does not have the ignition terminal, connect Ignition wire (red) to the terminal on the vehicle’s fuse box which provides 12 V DC power supply and is turned on and off by the ignition key. • Keep all cables away from heat dissipate metal parts. • After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly. • If the fuse blows, first make sure the wires are not touching car’s chassis, then replace the old fuse with one that has the same rating. If you still have troubles, reset the unit. ( 3) ENGLISH JS_JVC_KD_R497_Q_EN_2.indd 15 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 15 7/17/2017 3:26:25 PM INSTALLATION/CONNECTION Part list for installation (A) Faceplate Installing the unit (in-dash mounting) (B) Trim plate Do the required wiring. ( 17) (C) Mounting sleeve (D) Wiring harness Hook on the top side Orientate the trim plate as illustrated before fitting. Dashboard of your car (E) Extraction key Bend the appropriate tabs to hold the sleeve firmly in place. Basic procedure 1 Remove the key from the ignition switch, then disconnect the terminal of the car battery. 2 Connect the wires properly. See Wiring connection. ( 17) 3 Install the unit to your car. See Installing the unit (in-dash mounting). 4 Connect the terminal of the car battery. 5 Detach the faceplate and reset the unit. ( 3) When installing without the mounting sleeve How to remove the unit 1 Remove the mounting sleeve and trim plate from the unit. 2 Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with screws (commercially available). Use only the specified screws. Using wrong screws might damage the unit. 16 ENGLISH JS_JVC_KD_R497_Q_EN_2.indd 16 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 7/17/2017 3:26:27 PM INSTALLATION/CONNECTION Wiring connection When connecting to an external amplifier, connect its ground wire to the car’s chassis to avoid damaging the unit. Rear/subwoofer output Fuse (10 A) Antenna terminal Connecting the ISO connectors on some VW/Audi or Opel (Vauxhall) automobiles You may need to modify the wiring of the supplied wiring harness as illustrated below. Ignition wire A7 (Red) (Red) Yellow (Battery wire) Red (Ignition wire) Light blue/yellow (Steering remote control wire) Unit Vehicle Battery wire (Yellow) A4 (Yellow) Default wiring If your car does not have an ISO terminal We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer. Red (A7) Yellow (A4) ISO connectors To the steering wheel remote control adapter Pin A4 A5 A6 A7 A8 B1 B2 B3 B4 B5 B6 B7 B8 Yellow Blue/White Orange/white Red Black Purple ] Purple/black [ Gray ] Gray/black [ White ] White/black [ Green ] Green/black [ Color and function : Battery : Power control (12 V 350 mA) : Car light control switch : Ignition (ACC) : Earth (ground) connection : Rear speaker (right) : Front speaker (right) : Front speaker (left) : Rear speaker (left)* * You can also connect a subwoofer speaker directly without an external subwoofer amplifier. For setting, 11. ENGLISH JS_JVC_KD_R497_Q_EN_2.indd 17 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 17 7/17/2017 3:26:28 PM SPECIFICATIONS 0.71 μV/75 Ω Quieting Sensitivity (DIN S/N = 46 dB) 2.0 μV/75 Ω Frequency Response (±3 dB) 30 Hz — 15 kHz Signal-to-Noise Ratio (MONO) 64 dB CD player FM 40 dB AM Frequency Range (MW) Usable Sensitivity (S/N = 20 dB) 531 kHz — 1 611 kHz (9 kHz step) AM Frequency Range (LW) Usable Sensitivity (S/N = 20 dB) 153 kHz — 279 kHz (9 kHz step) Laser Diode GaAIAs Digital Filter (D/A) 8 times over sampling Spindle Speed 500 rpm — 200 rpm (CLV) USB Usable Sensitivity (S/N = 26 dB) Stereo Separation (1 kHz) 18 FM 87.5 MHz — 108.0 MHz (50 kHz step) FM-LO 65.0 MHz — 74.0 MHz (30 kHz step) 28.2 μV (29 dBμ) 50 μV (33.9 dBμ) Wow & Flutter Below measurable limit Frequency Response (±1 dB) 20 Hz — 20 kHz Total Harmonic Distortion (1 kHz) 0.01 % Signal-to-Noise Ratio (1 kHz) 105 dB Dynamic Range 90 dB Channel Separation 85 dB MP3 Decode Compliant with MPEG-1/2 Audio Layer-3 WMA Decode Compliant with Windows Media Audio Auxiliary Frequency Range Audio Tuner FM Subject to change without notice. USB Standard USB 1.1, USB 2.0 (Full speed) Compatible Devices Mass storage class File System FAT12/16/32 Maximum Supply Current DC 5 V D/A Converter 24 Bit 1A Frequency Response (±1 dB) 20 Hz — 20 kHz Signal-to-Noise Ratio (1 kHz) 105 dB Dynamic Range 90 dB Channel Separation 85 dB MP3 Decode Compliant with MPEG-1/2 Audio Layer-3 WMA Decode Compliant with Windows Media Audio WAV Decode Linear-PCM FLAC Decode FLAC files Frequency Response (±3 dB) 20 Hz — 20 kHz Input Maximum Voltage 1 000 mV Input Impedance 30 kΩ Maximum Output Power 50 W × 4 or 50 W × 2 + 50 W × 1 (Subwoofer = 4 Ω) Full Bandwidth Power (at less than 1 % THD) 22 W × 4 Speaker Impedance 4Ω—8Ω Preout Level/Load (CD/USB) 2 500 mV/10 kΩ load Preout Impedance ≤ 600 Ω ENGLISH JS_JVC_KD_R497_Q_EN_2.indd 18 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 7/17/2017 3:26:29 PM General SPECIFICATIONS Operating Voltage (10.5 V — 16 V allowable) 14.4 V Maximum Current Consumption 10 A Operating Temperature Range –10°C — +60°C Installation Size (W × H × D) 182 mm × 53 mm × 158 mm Net Weight (includes Trimplate, Mounting Sleeve) 1.2 kg ENGLISH JS_JVC_KD_R497_Q_EN_2.indd 19 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 19 7/17/2017 3:26:29 PM • Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • Android is trademark of Google Inc. libFLAC Copyright (C) 2000-2009 Josh Coalson Copyright (C) 2011-2013 Xiph.Org Foundation Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Дата изготовления (месяц/год) находится на этикетке устройства. В соответствии с Законом Российской Федерации “О защите прав потребителей” срок службы (годности) данного товара “по истечении которого он может представлять опасность для жизни, здоровья потребителя, причинять вред его имуществу или окружающей среде” составляет семь (7) лет со дня производства. Дополнительные косметические материалы к данному товару, поставляемые вместе с ним, могут храниться в течение двух (2) лет со дня его производства. Срок службы (годности), кроме срока хранения дополнительных косметических материалов, упомянутых в предыдущих двух пунктах, не затрагивает никаких других прав потребителя, в частности, гарантийного обслуживания JVC, которое он может получить в соответствии с законом о правах потребителя или других законов, связанных с ним. Условия хранения: Температура: от –30°C до +85°C Влажность: от 0% до 90% © 2017 JVC KENWOOD Corporation JS_JVC_KD_R497_Q_C.indd iii 0817DTSMDTJEIN Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 7/10/2017 9:39:33 AM ">

Public link updated
The public link to your chat has been updated.
Advertisement