Mettler Toledo | LJ16 | User manual | Mettler Toledo LJ16 User manual

Operating instructions
METTLER TOLEDO
LC-P45 Printer
11
ID .01.200
0
71-015:28:3
0.6
3
3
316206.55 -34
4
5
g
Su
45.7.92 g
----- m
3
----- 3420 2.54 g g
END .74
----- g
---2
1
7
Def
8
Men
u
4
ID
Cod
1
45 P
r
1 2
3
2
Res
rinte
6
e
F
LC-P
9
5
ult
3
31
Men
u
0
Clea
r
METTLE
R TOLE
DO
Overview
1
2
3
4
5
6
7
8
Introduction
Startup procedure
Applications
Operation
Printer functions
Maintenance
Malfunctions
Appendix
1.1
2.1
2.2
2.3
4.1
4.2
4.3
4.4
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
6.1
6.2
7.1
7.2
8.1
8.2
8.3
8.4
What are the capabilities of the LC-P45 Printer → Page 3
Cautionary notes → Page 4
Inserting the batteries and paper, attachment, printing → Page 5
Setting date and time → Page 6
Selecting applications → Page 7
Using the keypad → Page 10
Configuring the printer in the menu → Page 10
Entering values of variables (e.g. lot identification ID) → Page 12
Selecting printer function → Page 13
Printing out weight values → Page15 Generating statistics of a weight series → Page16
Totalizing weight values → Page 17
Multiplying (dividing) the weight by a factor → Page 18
Recording the moisture determination with the LP16/LJ16 IR Dryer → Page 19
Pipette test for calibrating volumetric dosing apparatus → Page 19
Recording the processes with M-Pac application software packages → Page 21
Checking a balance with a test weight → Page 22
Calibrating (adjusting) a balance with a calibration weight → Page 23
Changing paper and ribbon → Page 24
Maintenance, Service and Cleaning → Page 25
Interpreting the error messages → Page 26
Printer test → Page 28
Accessories for GA45 Printer (paper, ribbon, etc.) → Page 28
I/O interfaces → Page 29
Attachment to METTLER TOLEDO instruments, additional hardware, available functions → Page 30
Technical data → Page 33
1 Introduction
1.1
What are the capabilities of the LC-P45 Printer?
The LC-P45 is a versatile dot matrix printer with advanced print functions for normal paper. It can supplement the weight value with date, time and other data.
It has two LocalCAN interfaces and one RS-232-C interface and is primarily suitable for attachment to METTLER TOLEDO balances and scales equipped with
the standard software, but will also print out the records of the METTLER TOLEDO application software Pacs (M-Pacs) and of the LP16 and LJ16 METTLER
TOLEDO Infrared Dryers.
The various print functions of the LC-P45 can be selected in the dialog mode (English, German, French, Spanish or Italian). The settings are stored in a failsafe manner thanks to battery buffering.
• Print weight
The LC-P45 prints out the weight displayed on the balance directly.
- Date and time
- Lot identification (ID)
- Balance identification
- Current sample No.
For users complying with quality management regulations such as GLP or GMP or for those who wish
for a detailed record of a weighing. You can supplement the weighing result by automatically printing
out any of the adjacent data.
- Sample code
The sample code, a comment for a more detailed definition of the weighing sample, is entered directly
for every sample.
• Totalization
Without the need to purchase peripherals or software, the LC-P45 automatically generates statistics of the
weight values of your sample series and calculates the most important statistical parameters.
Pa
ge
s
7/
8
g
.0
68
34
1
ID 1.0
1
.2
8
00
0
• Generate statistics
7.
4. 14:
5- 53
22 :3
.0 2
3
• Insertion of The LC-P45 can also totalize weight values, thus calculating and documenting running totals. This function is especially useful when weighing in formulations.
• Multiplication/division
This function allows weight values to be multiplied or divided by any desired factors, Typical examples
are calculating prices based on a price per unit weight or converting weights into volumes.
• Check balance and calibrate
A check on the accuracy of a balance by means of a test weight is fully documented. Likewise, adjustment of the balance by means of a calibration weight.
• LP16/LJ16 Infrared Dryer
Date, time and lot identification (ID) are automatically added to the record.
• Pipette check
This function enables pipettes and other volumetric measuring and dosing apparatus to be calibrated by
a simple method which is also completely documented.
2 Startup procedure
2.1
Cautionary notes
For reasons of safety, the housing of the printer must not be opened by the user. If technical faults appear or if the printing unit or power line fuse has to be
changed, please notify your responsible METTLER TOLEDO service.
• The LC-P45 Printer may be used only indoors and on no account in hazardous areas.
• The electronics of the LC-P45 Printer are protected against the ingress of splashing water and dust.
However, as the printer housing is not tight the printer should not be used in the presence of liquids.
• Comply with cleaning instructions (see page 25), protect power plug against wet conditions.
• Never open the printer housing. Should you ever have problems with your printer, please contact your
responsible METTLER TOLEDO dealer.
2.2
Inserting the batteries
Two batteries are provided and supply the clock and the memories for the variable settings of the printer
when it is not connected to the power supply.
Please note: To avoid loss of any printer settings you may have made, attach the LC-P45 Printer to the
power supply when changing the batteries.
• Lift up paper cover and pull paper backward out of the printing unit
• Open battery compartment and insert batteries
7
Def
8
Men
4
5
Code
1
F
MET
TLER
6
u
Clea
r
3
lt
5 Pr
0
Men
12
3
2
Resu
GA4
9
u
ID
inte
r
31
Inserting paper
• Feed paper through the slot in the printing unit in the direction of the arrow
• Switch on printer
(toggle switch at right rear, the number of the software version will be printed out automatically)
• Press and hold until sufficient paper has been fed in
7
Def
8
Men
4
5
Code
F
MET
TLER
lt
P45
6
12
3
2
Resu
LC-
9
u
ID
1
Prin
ter
0
Men
u
Clea
r
3
31
Attaching printer, printing
• Plug the cable supplied into the LC-P45 and the I/O data interface of a balance or instrument. The
printer is now ready for operation!
• Balance
Print out the weight value of the balance
If no printout appears: Set both devices to the factory setting! (The interface parameters are then
matched. Green pilot lamp flashes, see page 26; available functions, see page 30)
8
Menu
0
Menu
set the LC-P45 to
the factory setting
2.3
Setting date and time
Setting or changing date and time to local time.
Date (EURO or US version)
7
Def
1
• Start date definition
31
4
....
The input process can be checked in the
balance display
Correction of wrong entry
Clear
3
• Entry of the date, e.g. • Concluding definition
23.01.97 (EURO format, day.month.year) or
1-23-97 (US format, month-day-year)
Please note: Separation of the numbers
with EURO by ".", with US by "-"
Time (24-hour format)
7
3
• Start time definition
Def
1
3
....
5
• Entry of the current time, e.g. 13.46.05 (hours.minutes.seconds)
• Concluding definition
3
Note:
prints out date and time directly at all times
3 Selecting applications
Printing out
weight values
Page 15
(1 ... record
header → p. 11)
5
3468.08 g
ID 04-83-18.5
3468.08 g
2
Lot identification (ID) + weight
11.01.2000
ID 04-93-18.5
3468.08 g
3
Date + lot identification
+ weight
11.01.2000
14:53:32
ID 04-93-18.5
3468.08 g
4
11.01.2000
14:53:32
ID 04-83-18.5
STANDARD V10.50.00
TYPE : PM6100
INR : 911375
3468.08 g
5
Complete documentation following
GLP (Good Laboratory Practice)
14
15
16
17
0.49
55.61
64.03
123.97
Page 16
11.01.2000
14:25:33
ID 52-88.6.31
1 99.5 g
2 101.5 g
3 103.5 g
4 100.5 g
5 102.4 g
6 104.5 g
n 6
_
x 101.98 g
s 1.87 g
srel 1.83 %
min. 99.5 g
max. 104.5 g
dif. 5.0 g --------- END --------
1
Print out weight by itself
Date + time + lot identification + weight
Generating statistics
of weight values
11.01.2000
14:53:32
3468.08 g
4
4
Date + time + weight (ID set to 0)
g
g
g
g
Current sample number + weight
Totalization
Page 17
11.01.2000 15:28:33
ID 71-00.6-34 206.55 g
1 2 3165.92 g
3 45.73 g
4 2.54 g
Sum
3420.74 g --------- END --------
• Simple formula weighing
Multiplying
(dividing)
Factor
* Page 18
3.5
2.51 g
8.80
• Calculating prices
1500.08 g
Code
8806-4.29
Weight + sample code (comment on
weighing)
• Determine production homogeneity
• Determining volume
• Demonstrate reproducibility of an
experiment
• Weighing in any weight units
• Determining density
• Calculating weight of area or length
(kg/m2 or g/m)
LP16/LJ16 IR Dryer Page 19
11.01.2000
15:28:33
71-00.6-34 ID Time
5.0 Min
Temp 160 C
Mode
Timer
0..-100%
0.0M 11.010 g
1.0M -0.20 %
2.0M -1.36 %
3.0M -2.53 %
4.0M -3.18 %
5.0M -3.41 %
Time eff.
5.0 Min
-3.41 %
-0.377 g
--------- END --------
• Documentation of a drying operation
Pipette check Page 19
11.01.2000
11:15:50
ID 1128489
SNR:
1118000002
Factor
1.0032
Rounding
0.0001
0.09844g
1 98.7550µl
0.09870g
2 99.0158µl
0.09876g
3 99.0760µl
0.09882g
4 99.1362µl
n 4
x 98.99575µl
s 0.16786µl
_
srel
0.17%
min.
98.7550µl
max.
99.1362µl
dif.
0.3812µl
--------- END -------• Verification of volumetric dosing
apparatus (pipettes, volumetric
flasks, burettes, etc.)
• Generating statistics and calculating the most important
statistical parameters
METTLER M-Pacs application software
Page 21
----------------------
% FORMULA
----------------------
11.01.2000
13:29
*Target: 2500.00 g *******
1*Comp
20.00 %
19.91 %
Weight
Weight
497.84 g
2*Comp
7.50 %
Weight
7.56 %
Weight
188.94 g
Total
686.80 g
Total
27.47 %
----------------------
2501.10 g
Total
Total
100.04 %
----------------------
• Documentation of the process sequence, e.g. of a formula weighing operation
Checking balance
with test weight *
Page 22
Calibrating
Page 23
(adjusting) balan­ce
with calibration weight *
---- BALANCE TEST ----
11.01.2000
14:31:57
-BALANCE CALIBRATION -
11.01.2000
16:51:57
METTLER TOLEDO
Balance
Type: PG503DR-S
SNR: 1113000000
METTLER TOLEDO
Balance
Type: PG503DR-S
SNR: 1113000000
Int. calibration done
Target: 200.000
Actual: 200.005
Diff: 0.005
Internal test done
Signature:
......................
--------- END --------
Signature:
......................
--------- END --------
• Documentation of the check following GLP and ISO 9001
• Documentation of the calibration
following GLP and ISO 9001
* The printed records of the functions “Checking” and “Adjusting” appear in the respective national language only on connection to PR/SR balances. With all
other balance models, English is used as the standard language.
10
4 Operation
4.1
7
Def
8
9
Menu
0
Menu
4
5
6
ID
Code
1 2 3
1
2
3
F
Result
Clear
Using the keypad
Purpose of the keypad
1. Configuring the printer
2. Entry of variable values, e.g. lot identification (ID)
3. Selection of the printer function
Input mode
The printer functions are set in the dialog mode. The entries appear in the balance display and the
LC-P45 prints them out as confirmation.
31
4.2
Configuring the printer in the menu
What is set and how?
The menu is used to configure the operational setting of the LC-P45:
• Set LC-P45 to factory setting
• Activate checking and calibration of the balance
• Select record header
• Select language of the dialog and record texts
• Select interface parameters
8
Menu
...
9
...
0
Menu
These three keys are used to enter the menu, choose the setting and store the selected setting.
Note: Variables are inputted directly. It is not necessary to enter the menu.
8
--------- Menu ------
ACTIVATE:
Factory setting
Verification
Calibration
RECORD HEADER:
*
No record header
1
2
ID
3
Date/ID
4
Date/Time/ID
5
Date/Time/ID/Bal.
LANGUAGE/SPRACHE:
*
English
Deutsch
9
Français
1)
Español Italiano 1)
BAUDRATE: 2)
*
2400
0
1200
2)
Menu
PARITY: *
even/7 bit
odd/7 bit
Clear
no/7 bit
no/8 bit
HANDSHAKE: 2)
*
off
xon/xoff
hardware
Menu
8
Menu
8
Menu
Configuring the printer
8
Entry into menu
Menu
8
Jump to next menu item, e.g. RECORD HEADER, LANGUAGE/SPRACHE... Menu
9
Selection of the setting within a menu item, e.g. English, Deutsch...
:
0 Menu
Clear
1
5
( ... record
header layout, see page 7)4
Further settings if required
Quitting the menu with simultaneous storage of all selected settings
Quitting the menu without storage of the selected settings (abort)
Printing out the current menu settings
8 Printout
of a list of Menu
the current settings
Example of a setting
Entry into menu and changing the LC-P45 LANGUAGE/SPRACHE setting
from English to Spanish or Italiano
Notes:
Clear
8
Menu
8
Menu
8
9
Menu
9
9
0
Menu
• * These settings are the factory settings; * marks the current setting after a change
• The menu settings are stored in a fail-safe manner (battery)
• 1) Either Español or Italiano
• 2) I/O via LocalCAN interface: no setting necessary.
11
12
4.3
Variable value
Time
Key sequence
7
3
Def
Date
7
Def
Lot identification (ID)
Factor for multiplication (division)
31
7
4
Def
ID
Sample code (comment on individual weighing)
Sample number start value
5
Code
7
6
Def
1 2 3
7
Def
Rounding in multiplication
Number of line feeds after printout of
weight or result
Notes: Entering values of variables
7
2
Def
Result
7
Def
Range of values
Numeric
values
Hours.minutes.seconds
(0.0.0 ... 23.59.59)
Numeric
values
EURO:
US: Numeric
values
Number with max. 20 digits (0 ... 9 plus "." and "-")
(0 removes the ID from the record)
Numeric
values
Number with max. 10 digits (0 ... 9 plus "." and "-")
[is not stored!]
Numeric
values
1 ... 9 999 (0 removes the sample number from the
record)
Numeric
values
0.000 001 ... 9 999 999
Numeric
values
0.05 : 2 decimal places, the 2nd rounded to 5
1.00 : 2 decimal places, both are = 0
0.001: 3 decimal places, the 3rd to the nearest 1
Numeric
values
0 ... 3
• The input process can be checked in the balance display; correction of wrong entry with • The inputted values are stored in a fail-safe manner (exception: sample code)
Day.month.year (1.1.00 ... 31.12.99)
Month-day-year (1-1-00 ... 12-31-99)
Clear
4.4
7
1
Def
F
Selecting printer function
• Entry into selection
Selection of function
* 1 =Print
2 =Statistics
3 =Totalization
4 =Multiplication
5 =IR Drying LP16/ LJ16
6 =Pipette check
1
On entry, a list of the available functions with their selection numbers are automatically printed out.
• Printing of weight values
The input process can be checked in the
balance dis­play. Correction of wrong entry
Clear
or
or
2
3
• Generation of statistics of weight values
• Totalization of weight values
13
14
or
or
or
4
5
6
• Multiplication (division) of weight values by a factor
• Record of drying operation of LP16 and LJ16 IR Dryer
The selection of the printer function is stored in
a fail-safe manner (battery)
• Pipette test for calibrating volumetric dosing apparatus
5 Printer functions
8
8
Menu
9
Menu
...
0
Menu
5.1
Printing out weight values
Printing with manual insertion of date and time
• Select "No record header" in the menu item RECORD HEADER (page 11)
Set date and time page 6
• Print date + time
31
• Print weight
8
8
Menu
9
Menu
7
4
Def
ID
7
6
Def
1 2 3
...
...
...
0
Menu
Printing with automatic insertion of date, time, lot identification (ID) and sample number, depending on requirements
• Select the record header according to requirements in the menu (e.g.date/time/ID; page 11)
• Enter according to requirements (page 12):
– Lot identification (ID)
– Sample number start value
• Print record header and weight automatically
1
or
F
• Print record header and current
sample No. + weight
automatically
15
Clear
Resets the sample No. to the start
value at any time
16
5.2
7
1
Def
F
8
Menu
8
Menu
7
4
Def
ID
2
9
Generating statistics of a weight series
• Select "Statistics" function (page 13)
...
...
1
0
• Select the record header in the menu (page11)
Menu
• If required, enter lot identification (ID)
(page 12)
• Load 1st sample and transfer weight
value to the statistics
F
:
:
• Continue the sample series
2
• If desired, print out intermediate statistics (the sample counter is not reset)
Result
:
min. = smallest value
max.
= largest value
dif. = largest - smallest value
max. number of samples = 999
:
Clear
• Continue the sample series
• Conclusion of the sample series with automatic printout
of the overall statistics (the sample counter is reset, the
statistics memory cleared)
5.3
7
1
Def
F
8
Menu
8
Menu
7
4
Def
ID
3
9
• Select function "Totalization" (page 13)
...
...
1
F
:
:
2
Result
:
Totalizing weight values
:
Clear
0
• Select record header in the menu (page 11)
Menu
• If required, enter lot identification (ID) (page 12)
• Load 1st sample and transfer
weight value to totalization memory
max. number of samples = 9 999
max. total = 99 999 999 g
• Continue the sample series
• If need be, interrupt the sample series for automatic printout of the intermediate total
(the sample counter is not reset)
• Continue the sample series
• Completion of the sample series with automatic printout of the total
(the sample counter is reset, the totalization memory cleared)
17
18
5.4
7
1
Def
F
8
Menu
4
8
9
Menu
7
4
Def
ID
7
4
Def
ID
7
4
Def
ID
7
4
Def
ID
• Select function "Multiplication" (page 14)
...
...
0
• Select the record header in the menu (page 11)
Menu
• According to requirements, enter (page 12):
– Lot identification (ID)
...
– Sample number start value
...
– Factor for multiplication (division)
...
– Rounding in multiplication (division)
1
or
Multiplying (dividing) the weight by a factor
• Loading the weighing sample
F
• Automatic multiplication of the weight value by the preselected factor and printout of the result together with multiplier and weight
2
• Automatic multiplication by the preselected factor and printout of the result alone
Result
5.5
Recording the moisture determination with LP16/LJ16 IR Dryer
The LC-P45 automatically inserts date, time and lot identification.
7
1
Def
F
8
5
...
9
5
Menu
7
4
Def
ID
• Select function "IR Drying LP16/LJ16" (page 14)
0
Menu
...
• If required, enter lot identification (ID) (page 12)
• Start drying
7
1
Def
F
8
Menu
8
Menu
7
4
Def
ID
• Select "Date/Time/ID" in menu item RECORD HEADER (page 11)
• Start drying operation according to instructions in the LP16/LJ16 operating instructions.
The LC-P45 prints out the record
5.6
6
9
Pipette test for calibrating volumetric dosing apparatus
• Select function "Pipette check" (page 14)
...
...
0
• Select the record header in the menu (page 11)
Menu
• Enter pipette identification (ID) (page 12)
19
20
7
6
Def
1 2 3
7
Def
7
2
Def
Result
...
– When necessary enter sample number start value (page 12)
...
• Enter the factor z (ISO 8655) to calculate the volume from the mass (page 12). This factor is essentially a function of the water temperature and atmospheric pressure
...
• Enter the rounding off convention for the calculated result (page 12)
:
Y
IS
LI
Q
Vo
lu
U
Ma
te
S
TE
M
S ®
1
F
• Dosing the liquid and inclusion of the first volume in the statistics. The dosed volume is calculated
automatically from the measured weight by multiplying it with the factor z. The weight and the calculated volume in µl, (V = m x z) are printed out
:
• Continue the sample series
2
• If desired, print out intermediate statistics (the sample counter is not reset) (page 16)
Result
:
:
Clear
• Continue the sample series
• Conclusion of the sample series with automatic printout of the overall statistics (the sample counter
is reset, the statistics memory cleared) (page 16)
5.7
Recording the processes with M-Pac application software packages
The LC-P45 prints out the records of the M-Pacs, e.g. CountPac or LabPac.
8
Menu
8
Menu
• Work with M-Pac
9
...
0
Menu
• Select "No record header" in menu item RECORD HEADER (page 11)
• The LC-P45 is ready for work with M-Pacs.
It prints out their records.
Note:
21
and
1
F
are inactive
22
5.8
8
9
0
Menu
Checking a balance with a test weight
• Selection and starting the check on the balance (page 11)
Menu
the menu section ACTIVATE is automatically printed out
ACTIVATE: Factory setting
Verification
Calibration
The prompt for weight loading/removal is shown on the balance display. At the same time, the following
record is printed out:
---- BALANCE TEST ----
11.01.2000 14:31:57
-------
*
Lo AD
METTLER TOLEDO
Balance
Type: PG503DR-S
SNR: 1113000000
Target: 200.000
Actual: 200.001
Diff: 0.001
1000.02 g
Internal test done
Signature:
.......................
--------- END ---------
* Minimum weight ≥ 900 in the
last 3 places of the display.
Exemple:
9.38 g
0.945 kg
date and time of verification
balance identification
---- BALANCE TEST ----
11.01.2000 14:31:57
METTLER TOLEDO
Balance
Type: AB204
SNR: 1113000000
date and time of verification
balance identification
identification of the test weight
displayed weight value of the
automatically tared balance
Weight ID: ...........
difference between target and
actual value
Target: ...........
Actual: 199.9800 g
Diff: ...........
signature of the tester
External test done
difference between target and
actual value
Signature:
signature of the tester
.......................
--------- END ---------
target value of the checking
procedure
displayed weight value of the
automatically tared balance
5.9
9
8
9
0
Calibrating (adjusting) a balance with a calibration weight
• Selection and starting the calibration procedure (page 11)
Menu
Menu
ACTIVATE: Factory setting
Verification
Calibration
-------
500.0 g
-------
0.0 g
the menu section ACTIVATE is automatically printed out
The prompt for weight loading/removal is shown, as usual, on the balance display. With balances with
an internal calibration weight, the automatic calibration routine is started. At the same time, the following
record is printed out:
Adjusting with external adjustment weight
-BALANCE CALIBRATION--
11.01.2000 14:31:57
METTLER TOLEDO
Balance
Type: PG503DR-S
SNR: 1113000000
balance identification
-BALANCE CALIBRATION--
11.01.2000 14:31:57
METTLER TOLEDO
Balance
Type: PG503DR-S
SNR: 1113000000
Weight ID: ...........
Weight: 500.000 g
identification number of the test
weight
Int. calibration done
target value of the adjustment
procedure
Signature:
Ext. calibration done
Signature:
-------
date and time of verification
Adjusting with internal adjustment weight
signature of the tester
.......................
--------- END ---------
0.0 g
23
.......................
--------- END ---------
date and time of verification
balance identification
signature of the tester
24
6 Maintenance
6.1
4
Changing paper
• Insertion of a new roll of paper is described on page 5, commercially available, normal paper is used.
Order number, see page 28.
1
Changing ribbon
Order number, see page 28.
3
7
Def
8
Men
4
5
Code
F
MET
0
Men
6
u
Clea
12
3
2
Resu
TLER
9
u
ID
1
r
2
• 1
3
lt
Prin
ter
5
7
Def
8
Men
4
5
Code
F
MET
TLER
6
12
3
2
Resu
lt
3
Prin
ter
9
u
ID
31
Pull paper out of printing unit
• 2...4 Remove ribbon cover
31
1
Changing paper and ribbon
0
Men
u
Clea
r
• 5
Remove ribbon cartridge
• Insert new ribbon (if need be, take up slack with tensioning wheel) and refit ribbon cover
• Insert paper and feed through slit in the printing unit as far as it will go
• Press and hold until sufficient paper has been fed in
6.2
Maintenance, Service and Cleaning
Under normal ambient conditions, the LC-P45 Printer requires practically no maintenance thanks to its
rugged construction. The METTLER TOLEDO service department is available should servicing be required.
Please ask your responsible METTLER TOLEDO dealer for details.
Cleaning
As the printer housing is made of top grade, resistant materials, all commercially available cleaning
agents may be used.
25
26
7 Malfunctions
7.1
Interpreting the error messages
Malfunction/Message
Possible cause Rectification
Printout unreadable
• Ribbon worn/entangled
• Service life of printing unit at an end
• Change/tension ribbon • Replace printing unit
Green pilot lamp does not light up
• No power, fuse defective
• Switch on power switch, have fuse replaced by METTLER TOLEDO
Green pilot lamp flashes slowly
• Balance waiting for stability/
cable not attached
Green pilot lamp flashes rapidly
• Transmission error
---- Interruption --- • Connection cable not attached or
older balance (unidir. interface)
• Check handshake, initiate print command with PRINT key of balance
- Transmission error • Interface parameters of LC-P45
and balance do not match
• Set interface parameters ------- ABORT --------
• Calibration has been aborted
• Repeat calibration
------ Timeout ------
• Entry incomplete, menu not ended,
balance has not sent any weight value in last 30 s
• Pause before completion of function must not be longer than 30 s, move balance to more stable location
- Battery discharged -
• Batteries for clock and settings
discharged
• Replace batteries; message repeated approx. every 2 hours
------ Overflow ----- • Number of samples for multiplication
exceeded
---- Input error -----
• Range of values exceeded
----- Unit error -----
• Different units in totalization, statistics or multiplication
ES • Syntax error (error message of balance), balance does not understand LC-P45 instruction
EL
• Logistical error (error message of balance), balance can not execute LC-P45 instruction
27
• Repeat entry
28
7.2
Printer test
The LC-P45 is provided with a self-test which automatically prints out its character set. This allows easier
recognition of a possible malfunction of the printing unit.
• Switch on LC-P45
+
• Switch off LC-P45
• Switch on LC-P45 and at the same time press and hold the feed key for a few seconds
• Terminate the printout by switching off the LC-P45
8 Appendix
8.1
Accessories for LC-P45 Printer
Accessory
Type/Order number
Standard equipment
Paper roll, set of 5
Ribbon cartridge, black, minimum order quantity 2
Batteries, 2 x UM3/AA (1.5 V)
Connection cable LC-P45-balance/scale, LocalCAN, 1 m
Extension cable/connection cable LocalCAN, 2 m
Extension cable/connection cable LocalCAN, 5 m
T-socket for devices with only one LocalCAN socket
Connection cable LC-P45-balance, RS-232C, 1 m
Connection cable LC-P45-balance, RS-232-C (MiniMettler), 1.5 m
Spare printing unit (may be changed only by METTLER TOLEDO service)
Power line fuse 230 V (slow-blow 100 mA,250 V) + 115 V (slow-blow 200 mA,250 V)
(may be changed only by METTLER TOLEDO service)
00072456
00065975
commercially available
LC-LC1 cable, 00229154
LC-LC2 cable, 00229115
LC-LC5 cable, 00229116
LC-LCT, 00229118
RS9 (m)–RS9 (f) cable, 11101051
00229029
– – 2 rolls
1 piece
2 piece
1 piece
–
–
–
1 piece
–
–
–
8.2
In/Out
HandShake
GND
+ 5 V/
20 mA
1
5
6
9
I/O interfaces
The LC-P45 has a LocalCAN and an RS-232-C interface for the attachment of METTLER TOLEDO instruments and peripherals.
One or other can be used, but if both are connected only the LocalCAN is active.
LocalCAN interface
• Bus interface with 2 4-pin looped sockets for the attachment of balances/scales/instruments and
peripherals.
• No transmission parameters need be adapted.
RS-232-C interface
• 9-pin male connector (pin assignment as IBM laptop)
• Matching to other device (transmission parameters) in the menu; see page 11
LocalCAN RS-232-C
• The handshake lines are active when "hardware" has been selected in menu item HANDSHAKE
• The standard cable 00229029 has no handshake lines
Connection example
A scale and a PC are attached to the LC-P45 via the LocalCAN bus.
LC-P45
29
30
Attachment to METTLER TOLEDO instruments, additional hardware, available functions (software version 2.40)
in balance display
Checking of key entries
LC-P45
Print command from
Printing balance
identification
documented
Checking of balance
Calibrating documented
Additional
hardware
date, ID
Record header with time,
multiplication
Remarks
Statistics, totalization,
Attachment to
balance or instrument
Available functions
Printing weight
Attachment to LC-P45
Printing record
8.3
AB, PB, SB, CB, GB, B *
9
15
m
l
l
l
l
l
l
l
l
AB, AB-S, PB, PB-S, SB, **
CB, GB, B
RS
o
l
l
l
l
l
l
l
l
m
l
l
l
l
l
l
l
l
o
l
l
l
l
l
l
l
l
m
l
l
l
l
l
l
l
l
AG, PG
9
PG-S with RS232C
RS
PG-S with LocalCAN Option
9
PR
9
m
l
l
l
l
l
l
l
l
AT/MT/UMT
PM/SM/AM
PJ/AJ Option 018/019
1
1
1
14 o
o
o
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
BB
M3/UM3 with Option 03
1
13
o
o
2
l
l
l
l
l
l
l
l
l
AE with Option 011
AE with Option 012
3
13
3 o
o
l
l
l
l
l
l
l
PE with Option 016
PE with Option 017
13
o
o
4
5
l
l
l
l
l
l
l
in balance display
Checking of key entries
LC-P45
Print command from
Printing balance
identification
documented
Checking of balance
Calibrating documented
date, ID
Additional
hardware
Record header with time,
multiplication
Statistics, totalization,
Remarks
Printing record
Attachment to
balance or instrument
Available functions
Printing weight
Attachment to LC-P45
LP16/LJ16
PM-Pacs
1
1
13
o 12,13 o
l
l
l
ID1
ID3 with Option 082
ID5 with Opion 082/089
10
10
10
o
o
o
6
6
6
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
IF with 504949
DT
13 o
o
6
8
l
l
l
l
l
l
l
DL18/21/25/35
FP62
13
13
o
o
7
7
l
l
31
32
Legend and general remarks to the attachment of the LC-P45 to METTLER TOLEDO instruments
Continuation legend
Legend
Connection cable to LC-P45
1
2
3
4
000229029 is standard
Order number: 00042931
00059759 included in option
Order number: 000229029
5
6
7
8
Order number: 00047936
Order number: 00504376
Order number: 00017842
Produce cable → page 29
9
RS
LC-LC1 cable is standard
RS9 (m) – RS9 (f) cable is standard
o =
LocalCAN
m = RS-232-C/CL
CL/RS-Interface converter
10 Interface mode: DIALOG MODE (standard setting). If the terminal is in break condition, it has to be switched off and on again. The LC-P45 can print maximally 24 characters a line, additional characters will be discarded.
12 Printout of Pac record only
13 Check of key entries via printout only, the balance display is inactive.
7
3
Example: Setting the time. After the
set time is printed out:
Def
-> 13:55
14 Documentation of calibration after balance software version 10.45.
15 For the AB, PB, SB, GB, CB and B balances and scales earlier than 02.97, the interface "LC-B
Option" is required.
CL249, Order number: 00059759
Adapter cable and hand switch
Order number: 00047473
Order number: 00042500
* Balance models earlier than 02.97
**Balance models after 02.97
General remarks
•
With
or
1
F
only stable weight values can be printed out; to print out unstable values,
set the balance to "send all" and give the print command with its PRINT key.
•
Do not set the balance to "send all" for statistics, totalization and multiplication.
•
If the PRINT key of the balance is pressed, the weight will be printed out without record header
8.4
Technical data
Printer
Printing unit dot matrix printer 5x9 dots, 24-character line length, Epson/IBM character table No. 4
Printing speed
faster than 1 line per second
Ribbon cartridge
exchangeable, black
Paper roll
normal paper, 58 x dia. 51 mm, integrated in housing, commercial size
Printer functions
see page 3
Clock
date representation EURO or US format, leap year taken into account
Interface
LocalCAN and RS-232-C bidirectional
Transmission parameters LocalCAN
fixed adjustment
Transmission parameters RS-232-C
transmission rate 1200, 2400* baud,
parity even*, odd, no
character length 7 bit*, 8 bit
Handshake
Bidirectional handshake: off*, xon/xoff, hardware
Printer buffer
128 characters
* = factory setting
33
34
Designed test conditions
Power supply voltage, Frequency
115 V oder 230 V, admissible fluctuations -20%+15%, 50/60 Hz
Current consumption
140 mA or 70 mA
Height
4000 m
Temperature range
5...40 °C
Humidity
max. relative humidity 80% for temperatures to max. 31 °C linear decreasing to 50% at 40 °C
Installation category
II
Pollution degree
2
Dimensions / weight
W x D x H = 157 x 210 x 85 mm / net 1.5 kg (incl. paper roll)
Leer
To protect your METTLER TOLEDO product's future:
METTLER TOLEDO service assures the quality, measuring accuracy and preservation
of value of all METTLER TOLEDO products for years to come.
Please send for full details about our attractive terms of service.
Thank you.
*705108*
Subject to technical changes and to the availability
of the accessories supplied with the instruments.
© Mettler-Toledo AG 2009 705108D Printed in Switzerland 0909/2.12
Mettler-Toledo AG, Laboratory & Weighing Technologies, CH-8606 Greifensee, Switzerland Phone +41-44-944 22 11, Fax +41-44-944 30 60, Internet: http://www.mt.com

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project