IP Link® Device Interface
Communication Sheet
bxlt_1_6048_1.pke
Revision: 8/23/2012
This document provides additional assistance with wiring your Extron IP Link enabled product to your device.
Different components may require a different wiring scheme than those listed below.
For complete operating instructions, refer to the user's manual for the specific Extron IP Link enabled product or
the controlled device manufacturer supplied documentation.
Device Specifications:
Device Type:
Manufacturer:
Firmware Version:
Model(s):
Video Projector
Boxlight
N/A
WX25NU, X25NU
Version History:
Driver
Version
1
Date
8/22/2012
IP Link
Compiler
GC
Version
1.5.1
3.3.2
Notes
Initial version.
Driver Notes:
Page 1 of 4
IP Link® Device Interface
Communication Sheet
bxlt_1_6048_1.pke
Revision: 8/23/2012
Control Commands & States:
Audio Mute
Toggle
Auto Image
Execute
Freeze
Toggle
Input
Computer 1
Computer 2
YPbPr
DVI
Video
S-Video
Up
Down
Left
Right
Menu
Power Control
On
Off
Video Mute
Toggle
Volume (Step)
Up
Down
Connection Status
Connected
Disconnected
Input
Computer 1
Computer 2
YPbPr
DVI
Video
S-Video
Component
Menu Navigation
Status Available:
Lamp Usage
Hours
Power Control
On
Off
Power Status
On
Off
Cooling Down
Page 2 of 4
Warming Up
IP Link® Device Interface
Communication Sheet
bxlt_1_6048_1.pke
Revision: 8/23/2012
MLC60 Series Supported Commands:
Audio Mute
Toggle
Auto Image
Execute
Freeze
Toggle
Input
Computer 1
Computer 2
YPbPr
DVI
Video
S-Video
Up
Down
Left
Right
Menu
Power Control
On
Off
Video Mute
Toggle
Volume (Step)
Up
Component
Menu Navigation
Down
Page 3 of 4
bxlt_1_6048_1.pke
IP Link® Device Interface
Communication Sheet
Revision: 8/23/2012
Cable and Adapter Requirements:
F/F RS-232 Null Modem Cable
Notes for the Device:
Serial communication:
Port Type: RS-232
Baud Rate: 9600
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
Pin Assignments Diagram:
Note: Captive screw connector may also be used as a serial connection.
General Notes:
Page 4 of 4