Craftsman 315.113911 cordless worklight Operator's Manual

Craftsman 315.113911 cordless worklight Operator's Manual

Craftsman 11391 is a cordless worklight that is lightweight and provides bright illumination for your workspace. It features a powerful 19.2-volt battery that provides long-lasting runtime, and a compact design that makes it easy to maneuver in tight spaces. The worklight also features a durable construction that can withstand harsh job site conditions, and a variety of mounting options that allow you to position the light where you need it.

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

Craftsman 315.113911 Cordless Worklight Operator's Manual | Manualzz

per'ator's anual

19.2 VOLT CORDLESS

Model No.

315.113911

RKLIGHT

Use worklight only with recommended

Craftsman battery pack and charger

(both sold separately)

Save this manual for future reference

WARNING:

Read and follow all

Safety Rules and Operating Instructions before first use of this product.

Customer Help Line: 1-800-932-3188

Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 USA

Visit the Craftsman web page: www.sears.com/craftsman

983000-465

2-04

[] Warranty 2

[] Introducton 2

[] General 3

[] SpecificSafetyRules...................................................................................................................................................

[] Symbols......................................................................................................................................................................

[] Operation 7-8

[] Maintenance 9-10

[] PartsOrdering

12

FULL ONE YEAR WARRANTY ON CRAFTSMAN 19.2 Volt Cordless Worklight. If this CRRFTSMRN tool fails to give complete satisfaction within one year from the date of purchase, RETURN IT TO THE NEAREST SEARS STORE OR SEARS

SERVICE CENTER IN THE UNITED STATES, and Sears will repair it, free of charge.

If this II:P,IqF'IrsMFII_ tool is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179

This tool has many features for making your drilling operations more pleasant and enjoyable. Safety, performance and dependability have been given top priority in the design of this Cordless Worklight, making it easy to maintain and operate.

[]

[]

READ ALL INSTRUCTIONS

[]

[]

[]

[]

KNOW YOUR WORKLIGHT.

Read operator's manual carefully. Learn its applications and limitations as well as the specific potential hazards related to this light.

USE ONLY RECOMMENDED BATTERY PACK

WITH YOUR WORKLIGHT.

Any attempt to use another battery pack will cause damage to your worklight and could possibly explode, cause a fire, or personal injury.

REMOVE BATTERY PACK FROM WORK-

LIGHT BEFORE REPLACING BULB OR PER-

FORMING ANY ROUTINE MAINTENANCE OR

CLEANING,

DO NOT DISASSEMBLE YOUR WORKLIGHT,

DO NOT PLACE WORKLIGHT OR BATTERY

PACK NEAR FiRE OR HEAT, They may explode.

Also, DO NOT dispose of a worn out battery pack by incinerating.

Do not incinerate the battery, even if it is severely damaged or completely worn out. The battery may explode in fire.

DO NOT STORE YOUR WORKUGHT iN A

DAMP OR WET LOCATION.

DO NOT STORE iN LOCATIONS WHERE THE TEMPERATURE iS LESS THAN 50°F OR MORE THAN 100°R

Do not store in outside sheds or in vehicles.

DO NOT PERMIT CHILDREN TO USE WORK-

LIGHT UNSUPERVISED.

It is not a toy. The temperature of the bulb will become hot after being on for only a short period of time. This hot temperature can cause burn injury if touched and can create sufficient heat to melt some fabrics.

A WARNING: If wrapped or in contact with fabrics, the worklight lens can produce sufficient heat to melt some fabrics. To avoid serious personal injury, never allow the worklight lens to come in contact with anything.

[] KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.

[] AVOID DANGEROUS ENVIRONMENT.

[]

[]

[]

KEEP LIGHT DRY, CLEAN, AND FREE FROM

OiL AND GREASE. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-based products or any strong solvent to clean your worklight.

STAY ALERT. Watch what you are doing and use common sense. Do not rush.

CHECK DAMAGED PARTS. Before further use of this worklight, a part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Do not use worklight if it does not function properly.

,_ WARNING: atmospheres.

Do not operate worklight or charger near flammable liquids or in gaseous or explosive

Internal sparks may ignite fumes.

_ WARNING: Lens and bulb become hot during use: oDuring or immediately after use, don't lay worklight flat on lens surface or place lens area in contact with a plastic or fabric covered surface.

®Handle worklight with care around any flammable surface.

®Let worklight cool for several minutes after use before changing bulb.

®Do not use or permit use of worklight in bed or sleeping bags. This worklight lens can melt fabric and a burn injury could result.

SAFETY RULES FOR BATTERY TOOLS

[]

[]

[]

USE ONLY THE CHARGER RECOMMENDED

FOR USE WITH YOUR WORKLIGHT.

Do not substitute any other charger. Use of another charger could cause batteries to explode causing possible serious injury.

Your battery tool should be charged in a location where the temperature is more than 50°F but less than 100°R

Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water, then neutralize with lemon juice or vinegar. If liquid gets in your eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention.

[]

WARNNNG: Batteries vent hydrogen gas and can explode in the presence of a source of ignition, such as a pilot light. To reduce the risk of serious personal injury, never use any cordless product in the presence of open flame. An exploded battery can propel debris and chemicals.

If exposed, flush with water immediately.

WARNING" Never use a battery pack that has been damaged or received a sharp blow. A damaged battery pack is subject to explosion.

Properly dispose of a damaged battery pack immediately. Failure to heed this warning can result in serious personal injury.

WHEN SERViCiNG USE ONLY iDENTiCAL

CRAFTSMAN REPLACEMENT PARTS.

SAFETY INSTRUCTIONS FOR CHARGER

[]

[]

Before using battery charger, read all instructions and cautionary markings in this manual, on battery charger, and product using battery charger.

CAUTION: To reduce the risk of injury, charge only nickel-cadmium type rechargeable batteries. Other types of batteries may burst causing personal injury and damage.

Do not expose to wet or damp conditions.

[] To reduce the risk of damage to charger body and cord, pull by charger plug rather than cord when disconnecting charger.

[] An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure:

[]

[]

[] a. That pins on plug of extension cord are the same number, size and shape as those of plug on charger.

b. That extension cord is properly wired and in good electrical condition; and c. That wire size is large enough for AC ampere rating of charger as specified below:

Cord Length (Feet) 25'

Cord Size (AWG) 16

50'

16

100'

16

Note: AWG = American Wire Gage

DO NOT OPERATE CHARGER WiTH A DAM=

AGED CORD OR PLUG. If damaged, have replaced immediately by a qualified serviceman.

Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman.

Do not disassemble charger; take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.

[] To reduce the risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning. Turning off controls will not reduce this risk.

[]

[]

Do not use charger in wet or damp conditions.

Disconnect charger from power supply when not in use.

[] SAVE THESE iNSTRUCTiONS.

Review them frequently and use them to instruct others who may use this light. If you loan someone this light, loan them these instructions also.

SAVE THESE INSTRUCTIONS

4

Someofthefollowingsymbolsmaybeusedonthistool.Pleasestudythemandlearntheirmeaning.Properinterpretationofthesesymbolswillallowyouto operatethetool betterandsafer.

SYMBOL NAME DESIGNATION/EXPLANATION

V

Volts Voltage

A

Amperes Current mz

W

Hertz

Watt

Frequency (cycles per second)

Power min

"L, n o

[]

.../min

@

Minutes

Alternating Current

Direct Current

No Load Speed

Class II Construction

Per Minute

Wet Conditions Alert

Time

Type of current

Type or a characteristic of current

Rotational speed, at no load

Double-insulated construction

Revolutions, strokes, surface speed, orbits etc., per minute

Do not expose to rain or use in damp locations.

Read The Operator's Manual

To reduce the risk of injury, user must read and understand operator's manual before using this product.

0

A

Eye Protection

Safety Alert

Always wear safety goggles or safety glasses with side shields and a full face shield when operating this product.

Precautions that involve your safety.

Failure to keep your hands away from the blade will result in serious personal injury.

No Hands Symbol

&

@

No Hands Symbol

No Hands Symbol

No Hands Symbol

Failure to keep your hands away from the blade will result in serious personal injury.

Failure to keep your hands away from the blade will result in serious personal injury.

Failure to keep your hands away from the blade will result in serious personal injury.

The following signal words and meanings are intended to explain the levels of risk associated with this product.

SYMBOL SIGNAL MEANING

DANGER:

WARNING:

Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation, which, if not avoided, could result in Death or serious injury.

CAUTION:

CAUTION:

Indicates a potentially hazardous situation, which, if not avoided, may

(Without Safety Alert Symbol) Indicates a situation that may result in property damage.

SERVICE

Servicing requires extreme care and knowledge and should be performed only by a qualified service technician.

For service we suggest you return the product to your nearest

AUTHORIZED SERVICE CENTER for repair. When servicing, use only identical replacement parts.

,_

WARNING:

To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely the operator's manual. Save this operator's manual and review frequently for continuing safe operation and instructing others who may use this product.

,i_ WARNING:

Obser,ve all normal safety precautions related to avoiding | electrical shock.

1

,_

WARNING:

O The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety

Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye protection which is marked to comply with ANSI Z87.1.

SAVE THESE INSTRUCTIONS

BATTERY

CHARGING

PACK/CHARGER

The battery pack and charger are not included with your worklight. They are both sold separately. When purchasing, use the following information:

MODEL NO.

BATTERY PACK CHARGER

973.113911

item No. _911375 item No. _911041

(1323517 or 1323903) (1425301)

BATTERY PACK

The battery pack for your worklight has been shipped in a low charge condition to prevent possible problems. Therefore, you should charge it until light on front of charger changes from red to green.

Note: Batteries will not reach full charge the first time they are charged. Allow several cycles (operating worklight followed by recharging) for batteries to become fully charged.

See Figure 1.

BATTERY PACK

[] Use only the recommended battery pack and charger with your worklight.

[] If both yellow and green LED come on, this indicates a deeply discharged or defective battery

[] pack.

Allow battery pack to remain in charger for 15 to

30 minutes. When battery pack reaches normal voltage range, red LED should come on.

If red LED does not come on after 30 minutes, this indicates a defective battery pack and should be replaced.

[] After normal usage, a minimum of 1 hour of charging time is required to fully recharge battery pack.

The battery pack will become slightly warm to the touch while charging. This is normal and does not indicate a problem.

[] Do not place charger and battery pack in an area of extreme heat or cold. It will work best at normal room temperature.

Note: Charger and battery pack should be placed in a location where the temperature is more than

50°F but less than 100°R

[] Make sure power supply is normal household

[] voltage, 120 volts, 60 Hz, AC only.

Connect charger to power supply.

[] When batteries become fully charged, unplug charger from power supply and remove the battery pack.

[] Place battery pack in charger aligning raised rib on battery pack with groove in charger.

See Figure 1.

[] Press down on battery pack to be sure contacts

[] on battery pack engage properly with contacts charger.

Normally, the red LED on charger will come on.

This indicates charger is in fast charging mode.

in

[] Red LED should remain on for approximately 1 hour then the green LED will come on. Green LED on indicates battery pack is fully charged and charger is in trickle charge mode. Note: Green

LED will remain on until battery pack is removed from charger or charger is disconnected from power supply.

iNFORMATION

BATTERY PACK

FOR RECHARGING HOT

When using your worklight continuously, the batteries in your battery pack will become hot. You should let a hot battery pack cool down for approximately 30 minutes before attempting to recharge. When the battery pack becomes discharged and is hot, this will cause the green LED to come on instead of the red LED.

After 30 minutes, reinsert battery pack in charger. If green LED continues to remain on, return battery pack to your nearest Sears Repair Center for checking or replacing.

BATTERYPACK

SHOWNIN CHARGER

CHARGER

Note: This situation only occurs when continuous use of your worklight causes the batteries to become hot. It does not occur under normal circumstances.

Refer to "CHARGING BATTERY PACK" for normal recharging of batteries. If the charger does not charge your battery pack under normal circumstances, return both the battery pack and charger to your nearest

Sears Repair Center for electrical check.

REDLED ON INDICATES

FASTCHARGINGMODE

GREENLEDON AFTERFAST CHARGING

CYCLE,iNDICATESFULLYCHARGEDBATTERY

PACKANDIN TRICKLECHARGEMODE.

YELLOWANDGREENLED8

ON INDICATESDEEPLY

Fig. 1

LED FUNCTIONS OF CHARGER

LED WILL BE ON TO INDICATE STATUS OF

CHARGER AND BATTERY PACK:

[] Red LED on = Fast charging mode.

[] Green LED on = Fully charged and in trickle charge mode.

[] Green LED on = When battery pack is inserted into charger, indicates hot battery pack or that battery pack is out of or below normal temperature range.

[] Yellow and Green LEDs on = Deeply discharged or defective battery pack.

[] No LED on = Defective charger or battery pack.

CAUTION: To prevent damage to battery pack, remove battery pack from charger immediately if no LED comes on. Return battery pack and charger to your nearest Sears Service Center for checking or replacing. Also, if you are removing battery pack from charger and no LEDs are on, return both battery pack and charger to your nearest Sears Service Center. Do not insert another battery pack into charger. A damaged charger may damage a battery pack.

TO INSTALL/REMOVE

See Figure 2.

BATTERY PACK

[] Use only the recommended battery pack with your worklight.

,A WARNING: Do not install battery pack to your worklight until you have read and understood all precautions and operating instructions in the manual and printed on battery pack and charger.

Orient battery pack so that raised rib on battery pack aligns with groove inside worklight.

Battery pack is designed to fit only one way in worklight handle.

[] Insert battery pack, making sure latches on each side of battery pack snap into place and battery pack is secure in worklight before use.

CAUTION: When placing battery pack in your worklight, be sure raised rib on battery pack aligns with groove inside worklight handle and latches snap into place properly. Improper assembly of battery pack can cause damage to internal components.

[] To remove battery pack, locate latches on end of battery pack and depress to release battery pack from your worklight.

SWITCH

See Figure 3.

To turn your worklight on and off, depress switch trigger.

MULTI=POSITION

See Figure 3.

HEAD

Your worklight has the feature of a multi-position head.

Rotate head to the desired position as shown in the arrows in Figure 3.

MULTI-POSITION

HEAD

SWITCH

TRIGGER

BATTERY

LMCHE8

Fig. 2

Fig. 3

_IL WARN(NG:

When servicing, use only identical

Craftsman replacement parts. Use of any other part may create a hazard or cause product damage.

_ WARNING: Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc. come in contact with plastic parts. They contain chemicals that can damage, weaken or destroy plastic.

Do not abuse power tools. Abusive practices can damage tool as well as workpiece.

_ WARN(NG: Do not attempt to modify this worklight or create accessories not recommended for use with this worklight. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

BULB REPLACEMENT

See Figures 4 & 5.

When purchasing replacement bulb, request recommended part number 780115002.

See Figure 5.

TO REPLACE BULB:

[] Remove battery pack from worklight.

See Figure 2.

[] Depress button located on top of ]en cover then pull lens cover to remove.

LENSCOVER

PULLLENS

COVERFORWARD

TO REMOVE

DEPRESS

BUTTON

[] Remove old bulb from spring by twisting bulb in a clockwise direction.

[] Insert new bulb in spring by twisting bulb in a clockwise direction.

[] Replace lens cover aligning tabs inside lens cover with slots on housing then snap into place.

[] Replace battery pack.

Note: For your convenience, your worklight has a bulb storage area to store an extra bulb. See Figure 5.

BUTTON

SPRING_

BULB

8TORAGEAREA

SLOT

TABS \_

REQUEST BULB PART NO.

780115002

Fig. 5

Fig. 4

BATTERIES

Yourworklight'sbatterypackis equippedwithnickelfromeachchargingwilldependonthetypeofwork youaredoing.

Thebatteriesinthisworklighthavebeendesigned

Toobtainthe longestpossiblebatterylife,wesuggest thefollowing:

[] Storeandchargeyourbatteriesina coolarea.

wearingringsandjewelry,couldresultin a serious burn.

[] Neverstorebatteriesina discharged discharged.

[] All batteriesgraduallylosetheircharge.The

charge.If youstoreyourworklightforlongperiods everymonthortwo.Thispracticewillprolong

batterylife.

_YCL

To preserve natural resources, please recycle or dispose of batteries properly.

This product contains nickelcadmium batteries. Local, state or federal laws may prohibit disposal of nickel-cadmium batteries in ordinary trash.

Consult your local waste authority for information regarding available recycling and/or disposal options.

BATTERY PACK REMOVAL AND

PREPARATION FOR RECYCLING

A

WARNING: Upon removal, cover the battery pack's terminals with heavy duty adhesive tape.

Do not attempt to destroy or disassemble battery pack or remove any of its components.

Nickelcadmium batteries must be recycled or disposed of properly. Also, never touch both terminals with metal objects and/or body parts as short circuit may result. Keep away from children. Failure to comply with these warnings could result in fire and/or serious injury.

_ib WARNING: Do not attempt to disassemble the battery pack. Fire or injury may result.

10

11

advertisement

Key Features

  • Cordless operation
  • Multi-position head
  • Bright LED bulb
  • 19.2 volt battery pack
  • Lightweight and portable
  • Easy to use

Frequently Answers and Questions

What kind of battery pack and charger do I need for this worklight?
You will need to purchase a Craftsman battery pack and charger separately. The recommended model numbers are 973.113911 for the battery pack and 911041 for the charger.
How long does it take to charge the battery pack?
After normal usage, it takes a minimum of 1 hour to fully recharge the battery pack.
How do I replace the bulb in the worklight?
To replace the bulb, first remove the battery pack from the worklight. Then, depress the button on the lens cover and pull the cover forward to remove it. Twist the old bulb counterclockwise to remove it and then insert the new bulb by twisting it clockwise. Finally, replace the lens cover by aligning the tabs with the slots on the housing and snapping it into place.
What is the recommended replacement bulb part number?
The recommended replacement bulb part number is 780115002.
How do I recycle the battery pack?
Consult your local waste authority for information regarding available recycling and/or disposal options.

Related manuals

Download PDF

advertisement