1890XP HD 19 inch Drum

1890XP HD 19 inch Drum
Bandit Industries, Inc. - Model 1890XP Heavy Duty - 19" Drum-Style Brush Chippers
●
Events
Trade Shows/Nascar
❍
Trade Show Calendar
Upcoming Trade Shows
❍
Bandit Racing Nascar
NASCAR Sponsorship
❍
Special Events
Dealer/Customer Events
Drum-Style Hand Fed Brush Chippers
Model 1890XP Heavy Duty - 19" Drum-Style Brush Chippers
The Model 1890XP Heavy-Duty (HD) is a high-capacity, hydraulic-feed drum-style chipper specifically designed for
those contractors and governmental agencies who tackle full tree removals and light land clearing. With diesel
engine options from 160 horsepower up to 250 horsepower, this unit is suited for those who want a machine with
ultimate power at both the feeding and chipping stages. With its solid steel welded construction, proven feed
system, durable components, and chip throwing technologies, this chipper provides all of the production advantages
you could want from a drum-style chipper.
As with all Bandit hand-fed drum-style chippers (excluding the Model 990XP), the Model 1890XP Heavy-Duty
comes equipped with a large 37-inch diameter drum. The larger drum allows for material to be chipped on the
bottom half of the drum, giving the knives the opportunity to cut more inline with the grain of the wood instead of
against it, thus allowing smoother operation and less vibration while requiring less horsepower. A larger diameter
http://www.banditchippers.com/index.php?option=com_content&view=article&id=78:model-1890xphd&catid=16&Itemid=151 (4 of 12) [3/20/2015 1:31:46 PM]
Bandit Industries, Inc. - Model 1890XP Heavy Duty - 19" Drum-Style Brush Chippers
drum also turns slower than a smaller drum, which increases torque to provide a smoother, powerful, and more
decisive chipping action. Component weight is distributed and supported on a sturdy, balanced frame that provides
the necessary physical reinforcement for chipping yet allowing the machine to be towed and maneuvered easily.
The Model 1890XP Heavy-Duty is equipped with the same proven, dependable hydraulic feed system you come to
expect from a Bandit chipper. The feed system features a 15-3/4" diameter top feed wheel and a 10-5/8" diameter
bottom feed wheel. Both feed wheels are 20" wide and are driven by (2) 63.9 CID hydraulic motors. These hydraulic
motors generate tremendous pulling power for reeling in and breaking down awkward shaped limbs and crotches,
which can seriously reduce trimming and chainsaw work. The wide profile infeed hopper and tray also provides plenty
of room for folding material. The feed rate is 100 feed per minute. With a hydraulic lift cylinder included to assist
with feeding, this unit shows no fear when presented with larger diameter materials.
The approximate weight of the Model 1890XP Heavy-Duty, depending upon selected options, is around 11,900 lbs.
It boasts a solid chassis construction using continuous steel welds for structural integrity as opposed to bolttogether techniques so it can provide years of dependable service for owners and operators wanting to chip limby, hardto-manage material and whole trees without extra trimming and chainsaw work. The Model 1890XP rides on tandem
7,000 lb. axles with 265/75R 16" tires.
The Model 1890XP Heavy-Duty (HD) has a much smoother and longer angled transition out of the drum housing and
up into the discharge chute. This design allows it to throw material harder, compacting chip trucks better and
reducing trips to the dump site. Other factors that maximize chip throwing power include deep knife pockets that
capture and throw the material out of the drum housing, side drum paddles and adjustable side vents that assist
in generating proper air flow, and Bandit's patented power slot positioned on the back side of the drum housing
that increases air flow and practically eliminates the chance of plugging. The discharge on the Model 1890XP HeavyDuty (HD) can manually rotate 360 degrees and has an adjustable deflector for directional control of the
broadcasted chips.
The Model 1890XP Heavy-Duty (HD) comes with a 30 gallon steel hydraulic tank and a 40 gallon steel fuel tank .
Recent fuel consumption test results have shown that Bandit drum-style chippers are much more efficient than
other chippers in the same category or class when it comes to production output versus costs.
Your chipper can be equipped with optional upgrades including a reversing auto feed system, swivel and height
adjustable discharge options, hydraulic winch, and a hydraulic pressure check kit. Deluxe option packages and/or
bundles are available. A full palette of both standard and custom paint colors give you the freedom to choose the look
of your brand or company.
A serious option worth considering is that the Model 1890XP Heavy-Duty (HD) can be equipped with a Model 75
knuckle boom loader. The loader unit is best suited for feeding large piles of brush into the chipper, reducing labor
and fuel costs. It can come equipped with radio remote controls or swing-out operator's console with joystick controls.
A 360-degree rotating grapple can reach out and pull in large diameter materials and entangled brush piles. Adding
the loader increases the machine weight of the machine, the capacities of the fuel and hydraulic tanks, and the strength
of the infeed hopper as it is upgrading to the same tapered style used on our Model 1850 whole tree chipper with a
30" weld on tray.
The Model 1890XP Heavy-Duty (HD), as with all Bandit chippers, is designed and equipped with operator safety in
mind. Standard items that accommodate any chipper package include guards that cover all moving parts, engine
disabling plugs, disc/drum locks, wooden push paddles, safety control bar, and other Bandit patented and patent
pending devices such as the "last chance" cables. Also, all components on Bandit chippers are designed to be
easily accessible to save time on routine maintenance schedules and to reduce downtime by being more serviceable out
in the field. Thus, Bandit chippers have proven over time to be the best economical decision you can make for a longterm investment in a brush chipper.
http://www.banditchippers.com/index.php?option=com_content&view=article&id=78:model-1890xphd&catid=16&Itemid=151 (5 of 12) [3/20/2015 1:31:46 PM]
Bandit Industries, Inc. - Model 1890XP Heavy Duty - 19" Drum-Style Brush Chippers
STANDARD EQUIPMENT
Slide box type feed system with (2) horizontal feed wheels. Top feed wheel is chain driven and is 15 3/4"
diameter x 20" wide, bottom feed wheel is driven by (1) 63.9 CID motor and is 10 5/8" diameter x 20" wide
Hydraulic lift cylinder (controlled manually)
41" high x 64" wide tapered infeed hopper with 30" fold down infeed hopper tray, heavy-duty taillight covers,
and spring lift assists
345 degree manual swivel discharge with 12" adjustable chip deflector
Clean out and inspection door on discharge
37" diameter x 22" wide drum with (4) 5/8" X 5 1/2" X 10" dual edge knives
40 gallon steel fuel tank with magnetic drain plug, lockable filler cap, and aluminum sight gauge
30 gallon steel hydraulic tank with magnetic drain plug, lockable filler cap, and aluminum sight gauge
6" tubular steel frame with 3/8" x 3" x 6" tubular steel tongue
8,000 pound capacity tongue jack with 15" of travel and foot pad
Banded chipper belts
Safety control bar controls forward / neutral / reverse
Engine disable plug for hood locking pin-preventing engine from operating without pin in place
Wooden pusher tool with mount on infeed hopper
(2) Last chance safety pull cables
Weather resistant manual container
Safety DVD, (2) 6" wide x 9" tall Bandit operator's manuals (one paper copy and one waterproof copy tethered
to machine) and (1) engine operator's manual
Spanish & English combination safety decals
PAINT SELECTION
Standard Imron Industrial Urethane Bandit Yellow (For Whole Tree Chippers please specify Chipper Guard
paint color)
Standard Imron Industrial Urethane White (For Whole Tree Chippers please specify Chipper Guard paint color)
Standard Imron Industrial Urethane Alert Orange (For Whole Tree Chippers please specify Chipper Guard
paint color)
Standard Imron Industrial Urethane Cat. Yellow (For Whole Tree Chippers please specify Chipper Guard paint color)
Standard Imron Industrial Urethane Green (For Whole Tree Chippers please specify Chipper Guard paint color)
Standard Imron Industrial Urethane Black (For Whole Tree Chippers please specify Chipper Guard paint color)
Special Imron Industrial Paint (please specify paint color and number)
Special Imron 5000 Paint (please specify paint color and number)
http://www.banditchippers.com/index.php?option=com_content&view=article&id=78:model-1890xphd&catid=16&Itemid=151 (7 of 12) [3/20/2015 1:31:46 PM]
Bandit Industries, Inc. - Model 1890XP Heavy Duty - 19" Drum-Style Brush Chippers
ENGINE SELECTION
Caterpillar C4.4, 174 horsepower with over center style clutch - Tier 4i (Includes Bandit control system
and reversing auto feed. Also includes 3 year / 3,500 engine warranty)
Caterpillar C6.6L, 213 horsepower with over center style clutch - Tier 3
Caterpillar C6.6, 250 horsepower with over center style clutch - Tier 3
John Deere 4045HFC93, 173 horsepower engine with over center style clutch - Tier 4i (Includes Bandit
control panel and reversing auto feed along with 2 year / 2,000 hour warranty)
John Deere 6068HFC08, 200 horsepower engine with over center style clutch - Tier 4 FINAL (Includes
Bandit control panel and reversing auto feed along with 2 year / 2,000 hour engine warranty)
Perkins 1106D, 250 horsepower with over center style clutch - Tier 3
DRIVE SYSTEM SELECTION
Drive system for engine horsepower options up to 142
Drive system for engine options ranging from 180 to 250 horsepower
Drive system for 275 horsepower engines
BATTERY/BATTERY BOX SELECTION
Lockable combination (bolt-on) steel tool/battery box with (1) 1,400 CCA Interstate battery
FEED SYSTEM SELECTION
Super sized spring loaded slide box feed system with (2) horizontal feed wheels. Top feed wheel is chain driven
and is 15 3/4" diameter x 32" wide, bottom feed wheel is 10 5/8" diameter x 32" wide.
Model 75 back hoe loader with swing-out operator's console, joystick controls, 60 gallon fuel and hydraulic
tanks, and model 1850 tapered infeed hopper with 30" weld on tray
Tether remote control kit (Controls: lift cylinder up/down, discharge swivel left/right, discharge flipper up/
down, feed forward/reverse, throttle and engine e-stop). (Price includes upgrade to a hydraulic swivel
discharge and deflector)
Radio remote control kit with tether back-up (Controls: lift cylinder up/down, feed forward/reverse,
discharge swivel left/right, discharge flipper up/down, throttle and engine e-stop). (Price includes upgrade to
a hydraulic swivel discharge and deflector)
INFEED SELECTION
41" high x 64" wide tapered infeed hopper with 30" weld on infeed tray
41" high x 64" wide tapered 1850 infeed hopper with lexan taillight covers and 30" weld on infeed tray
AXLE SELECTION
Tandem 7000 pound Torflex EZ lube axles with electric brakes
Tandem 8,000 pound Torflex EZ lube axles with electric brakes
Tandem 10,000 pound Torflex axles with electric brakes
Single 12,000 pound axle with electric brakes (CAN ONLY BE USED WITH FOUR CYLINDER ENGINES)
http://www.banditchippers.com/index.php?option=com_content&view=article&id=78:model-1890xphd&catid=16&Itemid=151 (8 of 12) [3/20/2015 1:31:46 PM]
Bandit Industries, Inc. - Model 1890XP Heavy Duty - 19" Drum-Style Brush Chippers
TIRES/RIMS SELECTION
(4) 235/85R 16" tires mounted on 8-bolt white spoke rims
(4) 235/85R 16" tires mounted on 8-bolt aluminum rims
(4) 235/75R 17.5" tires mounted on 8-bolt heavy-duty gray rims
(4) 235/75R 17.5" tires mounted on 8-bolt aluminum rims
(4) 245/75R 16" tires mounted on 8-bolt white DUAL rims
FENDERS SELECTION
3/16" heavy-duty steel weld on tandem axle fenders
Aluminum tandem axle bolt on fenders
DUAL wheel steel fenders
HITCH SELECTION
2 1/2" Wallace Forge pintle hitch
3" Buyer's Product pintle hitch
INFEED OPTIONS
Clear curtains to be installed on infeed (Please specify whether last chance cables should be mounted in FRONT
of or BEHIND curtains)
Rubber infeed curtain for infeed hopper (Please specify whether last chance cables should be mounted in FRONT
of or BEHIND curtains)
TIRE OPTIONS
Bolt on spare tire mount
Spare tire mounted on dual rim (245/75R 16")
ENGINE RELATED OPTIONS
Reversing Auto Feed with digital tach/hour meter (Units with heavy-duty or super-sized feed system)
Spark arrestor muffler (Available for diesel engines only)
Engine pre cleaner - Engine Air
Shut-off switch for engine shut-down located on both sides of infeed hopper
Restriction indicator on air cleaner, pop-up type.
Engine block heater
Tachometer and hour meter
DISCHARGE OPTIONS
Special over the top discharge (Folds back hydraulically for transport. Also includes hydraulic swivel and flipper)
Stops on discharge - 270 degree turn.
http://www.banditchippers.com/index.php?option=com_content&view=article&id=78:model-1890xphd&catid=16&Itemid=151 (9 of 12) [3/20/2015 1:31:46 PM]
Bandit Industries, Inc. - Model 1890XP Heavy Duty - 19" Drum-Style Brush Chippers
Hand crank height adjustable discharge
345 degree hand crank swivel discharge with 12" adjustable chip deflector
Clean out and inspection door on transition.
270 degree hydraulic controlled swivel discharge chute with manual 12" chip deflector
270 degree hydraulic controlled swivel discharge chute with hydraulic controlled 12" chip deflector
30 position discharge locking ring
KNIFE AND PARTS OPTIONS
Additional dual-edge knife
A.R. plate anvil in lieu of standard
Knife saver kit (includes sharpener, file, safety gloves, and carrying case)
Additional knife holder
Debris resistant bearing package in lieu of standard
Model 1890 wear kit (Includes 3 sets of knives, bolts, and nuts/washers, along with 1 anvil with hardware,
knife sharpener, and anvil gauge)
Drum chipper tool kit to change knives
Extra set of oil, air, and fuel filters for Caterpillar and Perkins engines ranging from 173.7 to 213 horsepower
Optional Chip Breaker
Tool kit for Handfed Chippers
Includes:
- Screwdriver set (4 pc)
- ½” Drive Torque wrench (25-250 ft)
- ½” Drive Socket set w/Ratchet (18 pc)
- Crescent wrench
- Open end wrench set (14 pc)
- Balldriver tool set (13 pc)
- ½” Drive slotted drag link socket
- 26” Plastic Tool Box
Extra set of oil, air, and fuel filters for Caterpillar and Perkins 250 horsepower engines
HYDRAULIC OPTIONS
Hydraulic winch mounted on infeed hopper (does not include cable or rope) (Please specify if winch end is to
be set-up with aluminum fairlead or steel rollers)
5/16" x 200' Amsteel Blue winch rope with HD steel thimble on end (shipped loose)
"Patented" Kar-Tech radio remote control kit for hydraulic winch only (Must also select hydraulic winch option)
"Patented" Kar-Tech radio remote for hydraulic lift cylinder (Note: In lieu of a manual lift cylinder bar, lift
cylinder control switches will be mounted on each side of infeed to allow lift cylinder control if needed (must
also select hydraulic lift cylinder option)
"Patented" Kar-Tech radio remote control kit for hydraulic winch and hydraulic lift cylinder (Note: In lieu of
a manual lift cylinder bar, lift cylinder control switches will be mounted on each side of infeed to allow lift
cylinder control if needed. Must also select hydraulic lift cylinder and hydraulic winch option)
Dual rear hydraulic stabilizers
http://www.banditchippers.com/index.php?option=com_content&view=article&id=78:model-1890xphd&catid=16&Itemid=151 (10 of 12) [3/20/2015 1:31:46 PM]
Bandit Industries, Inc. - Model 1890XP Heavy Duty - 19" Drum-Style Brush Chippers
Hydraulic oil cooler
Hydraulic pressure check system
Hydraulic flow control for feed wheel rate adjustment
Install bracket for winch and selector valves on side of infeed hopper (To be ordered if winch might be ordered
in the future)
FUEL AND HYDRAULIC TANK OPTIONS
60 gallon steel fuel tank with magnetic drain plug, lockable filler cap, and aluminum sight gauge
60 gallon steel hydraulic tank with magnetic drain plug, lockable filler cap, and aluminum sight gauge
Heavy-duty lockable filler cap covers
Shut- off valve for fuel tank
Mesh strainer in hydraulic tank filler opening
Mesh strainer in fuel tank filler opening
Gate valve for hydraulic tank
Electric hydraulic tank sight gauge mounted on instrument panel
Electric fuel tank sight gauge mounted on instrument panel
TRAILER RELATED OPTIONS
Orange fender markers to be mounted on each fender
(2) Mud Flaps (1/4" x 12" x 18")
7-PRONG (Flat Pin/RV-Style) Male trailer plug
7-PRONG (Round Pin) Male trailer plug
10,000 pound capacity tongue jack with spring return pad
Hydraulic tongue jack w/ multiple position drop leg
Single rear stabilizer
Frame / Fender supports
MISCELLANEOUS OPTIONS
Non skid coating on tongue and all step on areas
Install yellow vinyl grips on hydraulic last chance handles
Wheel chock holders on fenders (2) - Painted Steel (weld on)
4" x 6 1/2" inspection window on belt shield
Wheel chock holders on fenders (2) - Tread Bright aluminum (bolt on)
Rubber wheel chocks for tires (2)
360 Degree Amber Strobe Warning Light w/Guard
Pole style cone holder (weld on)
Extra chipper operators manual (standard version)
http://www.banditchippers.com/index.php?option=com_content&view=article&id=78:model-1890xphd&catid=16&Itemid=151 (11 of 12) [3/20/2015 1:31:46 PM]
Bandit Industries, Inc. - Model 1890XP Heavy Duty - 19" Drum-Style Brush Chippers
Extra engine operators manual
Wilton 5 1/2" swivel steel vice, w/ mount
Hydraulic Last Chance Cables
2 1/2 pound fire extinguisher with mount
Special bolt-on hoop style cone holder
For detailed specifications please contact your local authorized Bandit dealer.
No used equipment listings of this model available at this time.
●
< Prev
●
Next >
Dealer Network Search
Product:
State: --- Please Select --Country:
Browse
Dealer Login
●
Bandit Product Line
●
Used Equipment Listings
●
Trade Show Event Calendar
●
Testimonials / Customer Stories
●
Latest News
Username
Password
Remember Me
Log in
--- Please Select ---
You are here: Home
Product Line
Hand Fed Brush Chippers
Model 1890XP Heavy Duty - 19" Drum-Style Brush Chippers
Drum-Style Hand Fed Brush Chippers
●
Forgot your password?
●
Forgot your username?
Top
Bandit Industries, Inc. | 6750 Millbrook Road • Remus, MI 49340
Phone:(800) 952-0178 •
Fax: 1(989) 561-2375
http://www.banditchippers.com/index.php?option=com_content&view=article&id=78:model-1890xphd&catid=16&Itemid=151 (12 of 12) [3/20/2015 1:31:46 PM]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising