Propeller Guide 2015

Propeller Guide 2015
genuine volvo penta
propellers
Features, benefits and specifications
CONTENTS
4 SINGLE PROPELLERS FOR AQUAMATIC STERNDRIVES
6 SX
8 200-290, SP
PAGE 4 – SINGLE PROPELLERS
10 100
11 GREASE FOR PROPELLER COMPONENTS
12 DUOPROP PROPELLERS FOR AQUAMATIC STERNDRIVES
14 DPS
16 DPH
17 FWD
18 DPR
19 DPX
20 280, 290, DP
PAGE 12 – DUOPROP PROPELLERS
22 PROPELLERS FOR VOLVO PENTA IPS
24 IPS1
25 IPS2
26 IPS3
27 LINE CUTTER FOR IPS
28 PROPELLERS FOR S-DRIVES AND SHAFTS
28 FOLDING PROPELLERS
33 FIXED PROPELLERS
PAGE 22 – IPS PROPELLERS
34 ANODES FOR DRIVES AND PROPELLERS
Note! For installation instructions, refer to the
operators manual and additional information when
it is supplied with the propeller or hardware. Read
the instructions and safety information carefully
before starting work. The illustrations in this
publication are for illustrative purposes only.
2
CONTENT
PAGE 28 – S-DRIVE AND SHAFT
The art of
performance
Volvo Penta propellers are an engineering art form. Behind the slightest curve, smoothest
contour and tightest angle is a state-of-the-art design process based on years of experience.
We know propellers. And what is more, we know how to convert the power of your driveline into
real performance that you can feel on the water. It is this performance that leads to greater
boating pleasure and at the same time contributes to the long-term health of your driveline.
We know propellers
Our experience is reflected in a broad range of propellers for different applications including; IPS, single
and Duoprop propellers for Aquamatic sterndrive plus
folding and fixed propellers for S-Drive. We even have
folding propellers for shaft installations.
NEW
Type J - Aluminum duoprop for
our classic drives.
See page 20.
The only way forward
We design, manufacture and test propellers as part
of a complete propulsion system. It’s the only way.
Whether you have a powerboat or sailboat, there is a
genuine Volvo Penta propeller for your needs. Simply
contact your local Volvo Penta dealer for assistance.
Double your warranty
Genuine Volvo Penta propellers are covered by our standard 12 month warranty.
Have them supplied and installed by an authorized Volvo Penta dealer and we’ll
extend your warranty to 24 months — including the labor. Consult your nearest
dealer for more details.
Find your dealer
Go to volvopenta.com/dealerlocator to search among our 3,500 dealers worldwide.
You can also download our app – Volvo Penta Dealer Locator.
INTRODUCTION
3
4
Single propellers for Aquamatic sterndrives
Fifty years
of performance
Volvo Penta launched the first single propeller sterndrive over half a century ago. A lot has
changed since 1959. The march of technology continues, but one factor remains the same
– real performance comes from a propeller and driveline that are perfectly matched.
Genuine Volvo Penta single propellers for Aquamatic
Sterndrives must be developed exclusively for their
drive, matching both engine power and torque.
The result is a proven design that ensures optimal
performance, fuel economy and comfort along with the
peace of mind you expect from Volvo Penta.
Precise balancing gives minimal
vibrations, quiet and comfortable
operation. It is also essential for
efficiency and minimizes wear on
the drivetrain.
Shock-absorbing rubber bushing in
the hub reduces turning and pulling
forces and minimizes stress on the
drivetrain caused by gear changes
and propeller impact.
Developed and tested to ensure
optimal performance, durability, fuel
efficiency and life expectancy.
Perfectly matched pitch and
camber distribution contributes to
excellent propeller grip, optimal
operational efficiency, safe and
predictable handling.
S I N G L E P R O P E L L E R S F O R AQ U A M AT I C ST E R N D R I V E S
5
SX Drives
3-blade aluminum propeller
With its wide and efficient blade design this propeller offers excellent acceleration and top
speed. The state-of-the-art squeeze casting process together with special high-strength
aluminum alloy makes it stronger and more durable than traditional die-cast propellers. Four
layers of paint ensure excellent anti-corrosion performance.
•
•
•
•
Strong and durable high-performance 3-blade aluminum propeller.
Wide and efficient blade design providing excellent acceleration and top speed.
Shock-absorbing rubber bushing reduces vibrations and stress on the drivetrain.
Four layers of paint ensure excellent anti-corrosion performance.
Ø x PITCH
LH
14.3 x 21
14.2 x 23
14.5 x 19
14.8 x 17
15 x 15
15 x 16
15,5 x 12
15.5 x 13
15.5 x 14
RH
–
–
3817473
3817472
3817471
–
3855476
3855477
3855478
3817469
3817470
3817468
3817467
3817466
–
–
3840720
–
Installation hardware, see next page.
4-blade aluminum propeller
The four-blade propeller features the same strength and durability as the three-blade propeller.
Four blades provide increased torque for heavy loads and maneuverability together with great
stern lifting and mid-range performance. Four layers of paint ensure excellent anti-corrosion
performance.
•
•
•
•
Strong and durable high-performance 4-blade aluminum propeller.
Increased thrust for heavy loads and maneuverability.
Shock-absorbing rubber bushing reduces vibrations and stress on the drivetrain.
Four layers of paint ensure excellent anti-corrosion performance.
Ø x PITCH
LH
14.75 x 15
14.5 x 17
14.25 x 19
14 x 21
14 x 23
3587519
3587521
3587523
3587525
3587527
Installation hardware, see next page.
6
S I N G L E P R O P E L L E R S F O R AQ U A M AT I C ST E R N D R I V E S
RH
3587517
3587520
3587522
3587524
3587526
SX Drives
3-blade stainless steel propeller
This performance provider enhances top speed, acceleration and durability versus a comparable aluminum propeller. The blade configuration and through-hub exhaust design are important
factors for high efficiency and performance. This high-strength stainless steel propeller really
push the limits and makes it a perfect choice for high-power engines and fast boats.
• Enhances acceleration and top speed versus a comparable aluminum propeller.
• Excellent strength, durability and corrosion resistance.
• Shock-absorbing rubber bushing reduces vibrations and stress on the drivetrain.
Ø x PITCH
LH
14.75 x 17
14.75 x 19
14.75 x 21
14.25 x 23
RH
3860714
3860715
3860716
3860717
3862462
3860708
3860709
3860710
Installation hardware, 3 and 4-blade propellers for the SX drive
Pos
Part No
Item
Pos
Part No
Item
1
3852056
Split pin
3
3852350
Spacer
2
3850984
Propeller nut
4
3852020
Thrust washer
S I N G L E P R O P E L L E R S F O R AQ U A M AT I C ST E R N D R I V E S
7
200, 250, 270, 275, 280, 285, 290, SP Drives
Aluminum propeller with long hub – High-speed series
The High-speed propeller with long hub is developed from the standard propeller and features
more blade area. In a fast boat this not only means increased speed, but also that a heavily
loaded boat will plane more quickly and enjoy better fuel economy. The increased blade area
also provides faster and safer quayside maneuvering.
• Made of durable aluminum alloy developed to withstand salt water and
cavitation damage.
• Painted with epoxy powder - extremely hard and resistant to abrasion.
• Long hub design with shock-absorbing rubber bushing.
Note! Always use long hub propeller for V6, V8, AQD40, AQAD31/40/41 engines.
Ø x PITCH
LH
14 x 17
14 x 19
14 x 21
14 x 23
15 x 15
15 x 17
15 x 19
15 x 21
16 x 9
16 x 13
16 x 15
16 x 17
16 x 19
16 x 21
16 x 23
RH
854977
854978
854979
854980
854981
854982
854983
854984
854985
854986
854987
854988
854989
854990
854991
854992
854993
854994
854995
854996
854997
854998
854999
—
872000
872001
872002
872003
872004
872005
Long hub bushing
A = 93mm (3.661”)
Installation hardware, long hub propeller
The propeller cone locking requires that the drive has an internally threaded propeller shaft intended for the locking screw (2),
which was introduced on late production 270 and 280 drives but included as standard on newer drives. In some cases, older
drives have been updated using retrofit drilling and threading.
8
Pos
Part No
Item
1
854045
Propeller cone
Pos
Part No
Item
4
839534
Line cutter / Thrust washer, 250, 270, 275
2
850889
Locking screw
4
839423
Line cutter / Thrust washer, 280, 285, 290, SP-A
3
850888
Plastic washer
4
872082
Line cutter / Thrust washer, SP-A1, A2, C, C1, E
4
832965
Line cutter / Thrust washer, 200
873058
Tool
S I N G L E P R O P E L L E R S F O R AQ U A M AT I C ST E R N D R I V E S
200, 250, 270, 275, 280, 285, 290, SP Drives
Aluminum propeller with short hub – High-speed and standard series
The High-speed propeller features more blade area than the standard propeller. In a fast boat this
does not only mean increased speed, it also means that a heavily loaded boat will plane more
quickly, enjoying better fuel economy and increased cruising speed. The increased blade area
also provides faster and safer quayside maneuvering.
• Made of durable aluminum alloy developed to withstand salt water and
cavitation damage.
• Painted with epoxy powder – extremely hard and resistant to abrasion.
• Short hub design with shock-absorbing rubber bushing.
Note! Always use long hub propeller for V6, V8, AQD40, AQAD31/40/41 engines.
Ø x PITCH
LH
14 x 13
14 x 15
14 x 17
14 x 19
15 x 11
15 x 13
15 x 15
15 x 17
RH
813284 STD
814626 HS
814627 HS
814628 HS
813296 STD
813316 STD
814611 HS
814612 HS
HS = High-speed propeller, short hub
813285 STD
814631 HS
814632 HS
814633 HS
813297 STD
813317 STD
814615 HS
814616 HS
Short hub bushing
A = 78mm (3.071”)
STD = Standard propeller, short hub
Installation hardware, short-hub propeller
The propeller cone is locked in different ways depending on the propeller shaft design. Use the locking screw (2) on newer
drives that use an internally threaded propeller shaft. On drives without an internally threaded propeller shaft, use the tab
washer (5).
Pos
Part No
Item
Pos
Part No
Item
1
854045
Propeller cone
6
832965
Line cutter / Thrust washer, 200
2
850889
Locking screw
6
839534
Line cutter / Thrust washer, 250, 270, 275
3
854047
Spacer ring
6
839423
Line cutter / Thrust washer, 280, 285, 290, SP-A
4
850888
Plastic washer
6
872082
Line cutter / Thrust washer, SP-A1, A2, C, C1, E
5
897367
Tab washer
873058
Tool
S I N G L E P R O P E L L E R S F O R AQ U A M AT I C ST E R N D R I V E S
9
100 Drives
Aluminum propeller – Standard and High-speed series
Standard and High-speed propellers are made from a special, durable aluminium alloy
developed to withstand salt water and cavitation damage. Painted black with a special epoxy
powder which is extremely hard and resistant to abrasion, the High-speed propeller features
more blade area for increased performance.
Propellers for 100 drives with cylindrical shaft and locking pin
Ø x PITCH
LH
13 x 13
13 x 15
14 x 11
14 x 13
14 x 15
RH
813224 STD
839186 HS
813227 STD
813229 STD
832992 STD
HS = High-speed propeller
813233 STD
STD = Standard propeller
Propellers for 100 drives with splines (13/16”)
Ø x PITCH
LH
14 x 11
RH
804449
—
Installation hardware, 100 drives with cylindrical shaft and locking pin
10
Pos
Part No
Item
1
907881
Split pin
2
806660
Propeller cone
S I N G L E P R O P E L L E R S F O R AQ U A M AT I C ST E R N D R I V E S
Pos
Part No
Item
3
806661
Shear pin
Grease for propeller components
Grease it up
The propeller shaft should be
cleaned and re-greased at least
once a year, as well as when
changing the propeller. Regular
greasing will prevent the propeller
from sticking to the propeller shaft.
Refer to the operators manual for
recommended intervals.
Volvo Penta water-resistant grease is designed to provide excellent adhesion, water resistance and load-carrying properties,
as well as long-term protection against corrosion. It is a multi-purpose premium grease and is highly recommended for greasing
propeller shafts, folding propellers and all other propeller components.
• Highly adhesive and cohesive structure.
• Superb resistance to water washout.
• Excellent corrosion protection and lubrication endurance.
Description
Tube
Cartridge
Quantity
Grade
Color
25g
NLGI 2
Blue
Part No
828250
400g
NLGI 2
Blue
21347121
GREASE FOR PROPELLER COMPONENTS
11
12
D U O P R O P P R O P E L L E R S F O R AQ U A M AT I C ST E R N D R I V E S
Duoprop propellers for Aquamatic Sterndrives
Two propellers.
One superior thrust.
Launched in 1982, Volvo Penta showed the marine industry that twin counter-rotating
propellers could produce unparalleled thrust, straight and true tracking along with faster
acceleration – a completely new boating experience.
The duoprop propellers are designed to form a vital
part of the driveline, providing highly efficient and
predictable handling, together with excellent onboard
comfort and fuel efficiency.
Every set of duoprop propellers is designed, tested and
manufactured together to ensure not only a high top
speed, but the best overall performance – all this while
securing the service life of your drive.
Optimal interaction between the front
and rear propeller ensures maximum
performance and fuel efficiency throughout the entire speed range, as well as
smooth and comfortable running.
Perfectly matched pitch and camber
distribution contributes to excellent propeller grip, optimal operational efficiency,
safe and predictable handling.
Propellers made of stainless steel or nickel-bronzealuminum also include:
Precise balancing of each
propeller gives minimal
vibrations, quiet and smooth
operation. It is also essential
for efficiency and minimizes
wear on the drivetrain.
Optimized torque distribution between front
and rear propellers ensures that the drive works
with the load it is designed for – essential in
preserving the life of the drivetrain.
Galvanic isolation - the
propeller bushing is designed
to galvanically isolate the
propeller from the drive. It
will greatly reduce anode
consumption and prevent
galvanic corrosion that could
be caused by the propeller.
Shock-absorbing rubber
bushing in the hub reduces
vibration, turning and pulling
forces and minimizes stress
on the drivetrain caused by
gear-changes and propeller
impact.
D U O P R O P P R O P E L L E R S F O R AQ U A M AT I C ST E R N D R I V E S
13
DPS Drives
Type I and IH – Aluminum Duoprop propellers
The patented blade geometry and large active propeller diameter provide optimal performance
and fuel efficiency over the entire speed range as well as smooth running, excellent grip and
maneuverability. Squeeze casting and special high-strength aluminum alloy makes them
stronger and more durable than traditional die-cast propellers. Four layers of paint ensure
excellent anti-corrosion performance. Type I has straight splines, type IH has helical splines.
•
•
•
•
Engineered to optimize performance, durability and comfort.
Patented blade geometry, large active propeller diameter.
Strong and durable high-strength aluminum alloy.
Three-blade front propeller and four-blade rear propeller.
Note! Always use type F or FH stainless steel propellers in engines exceeding 240 hp or
capable of speeds above 38 knots (45 mph). See next page.
Type I for DPS, DPS-A (straight splines)
DIM
DIM
Set
Front
I2
21258482
I3
21258483
I4
21258484
I5
21258485
I6
21258486
Installation hardware, see next page.
Rear
21260642
21260643
21260644
21260645
21260646
Set
21657162
21657163
21657164
21657165
21657166
I7
I8
I9
I 10
Front
21258487
21258488
21258489
21258490
21260647
21260648
21260649
21260650
Rear
21657167
21657168
21657169
21657170
Type IH for DPS-B (helical/spiral splines)
DIM
DIM
Set
IH 2
IH 3
IH 4
IH 5
IH 6
Front
21661942
21661943
21661944
21661945
21661946
Rear
21661902
21661903
21661904
21661905
21661906
Set
21661922
21661923
21661924
21661925
21661926
IH 7
IH 8
IH 9
IH 10
Front
21661947
21661948
21661949
21661950
21661907
21661908
21661909
21661910
Rear
21661927
21661928
21661929
21661930
Installation hardware, see next page.
Upgrade from type D propellers to type I propellers
To ensure the best performance for your boat, consult your Volvo Penta dealer for advice on the right propeller size for your drive and engine.
Note! Do not mix D and I propellers on the same drive. Always use propellers of the same type and size on the drive
(or on both drives in twin installations).
Type D – Aluminium Duoprop propellers for DPS, DPS-A (helical/spiral splines)
Type D propeller sets are replaced by type I propeller sets. However, Type D propellers
(front and rear) are sold individually as spare parts.
DIM
DIM
Front
D0
D1
D2
D3
Rear
3851420
3851421
3851422
3851423
3851440
3851441
3851442
3851443
Front
D5
D6
D7
Installation hardware, see next page.
14
D U O P R O P P R O P E L L E R S F O R AQ U A M AT I C ST E R N D R I V E S
Rear
3856345
3856346
3856347
3856355
3856356
3856357
DPS Drives
Type F and FH – Stainless-steel Duoprop propellers
This is the perfect upgrade for enhanced performance, strength and durability. It provides
better acceleration and higher top speed due to greater strength and thinner blades - versus a
comparable aluminum propeller. The high-strength stainless steel adds excellent durability and
corrosion resistance. Complete with shock-absorbing rubber bushing and galvanic isolation
makes it perfectly matched for the DPS-drive and the ultimate choice for demanding boaters.
•
•
•
•
•
•
Enhanced acceleration and top speed versus a comparable aluminum propeller.
Excellent strength, durability and corrosion resistance.
Galvanic isolation protects the drive from corrosion caused by the propellers.
Shock-absorbing rubber bushing reduces vibrations and stress on the drivetrain.
Three-blade front propeller and three-blade rear propeller.
Type F has straight splines, type FH has helical (spiral) splines.
Type F for DPS, DPS-A (straight splines)
DIM
DIM
Set
F2
F3
F4
F5
Front
3857563
3857564
3851494
3851495
Rear
3857557
3857559
3851464
3851465
Set
3857558
3857560
3851474
3851475
F6
F7
F8
F9
Front
3851496
3851497
3851498
3851499
Rear
3851466
3851467
3851468
3851469
3851476
3851477
3851478
3851479
3885854
3885857
3885860
3885862
3885855
3885859
3885861
3885863
Type FH for DPS-B (helical/spiral splines)
DIM
DIM
Set
FH 2
FH 3
FH 4
FH 5
Front
3885838
3885839
3885840
3885841
Rear
3885846
3885848
3885850
3885852
REAR
Set
3885847
3885849
3885851
3885853
FH 6
FH 7
FH 8
FH 9
Front
3885842
3885843
3885844
3885845
Rear
FRONT
Installation hardware, type D, I, IH, F, FH
Pos
1
Part No
Item
21631162
Propeller nut, rear
Pos
Part No
Item
3862797
Tool, front
2
3851569
Propeller nut, front
3862808
Tool, rear
3
3851600
Ring (for F7, F8, F9, FH7, FH8, FH9)
3855516
Tool, front and rear propeller nut
D U O P R O P P R O P E L L E R S F O R AQ U A M AT I C ST E R N D R I V E S
15
DPH Drives
Type G – Nibral Duoprop propellers
Designed to capture the tremendous torque from the D4 and D6 engines, the patented blade
geometry provides optimal interaction between front and rear propellers for outstanding
efficiency and smooth and comfortable operation. The large blade area and great strength
ensure maximum grip and maneuverability. The extremely strong nibral (nickel-bronzealuminum) alloy ensures minimum growth and excellent durability. Complete with shockabsorbing rubber bushing and galvanic isolation makes it perfectly matched for the DPH-drive.
•
•
•
•
•
•
Patented blade geometry, outstanding efficiency and comfort.
Excellent durability, minimal marine growth.
Extremely strong nibral (nickel-bronze-aluminum) alloy.
Galvanic isolation protects the drive from corrosion caused by the propellers.
Shock-absorbing rubber bushing reduces vibrations and stress on the drivetrain.
Three-blade front propeller and four-blade rear propeller.
DIM
DIM
Set
G2
G3
G4
G5
G6
Front
3587375
3587378
3587379
3587380
3587381
3587386
3587389
3587391
3587393
3587395
Rear
Set
3587388
3587390
3587392
3587394
3587397
G7
G8
G9
G10
Front
3587382
3587383
3587384
3587385
3587398
3587400
3587402
3587404
Rear
3587399
3587401
3587403
3587405
FRONT
REAR
Installation hardware, type G
The propeller cone (1) has an integrated rear propeller nut and replaces previous propeller cone with separate rear propeller nut.
Pos
1
Part No
Item
21829326
Propeller cone kit*
2
991609
Lock bolt M12**
3
3863213
Propeller nut, rear***
Pos
Part No
Item
4
3863211
Propeller nut, front
21318669
Tool
* Propeller cone kit including propeller cone with integrated rear propeller nut and lock bolt (2).
** For newer drives with internal threaded propeller shaft intended for lock bolt (from SN 302029042).
*** For previous version of propeller cone with separate rear propeller nut.
16
D U O P R O P P R O P E L L E R S F O R AQ U A M AT I C ST E R N D R I V E S
FWD Drives
NEW
Type K – Stainless-steel Duoprop propellers
Specifically designed for the Volvo Penta Forward Drive. These propellers are made of a strong
and durable stainless-steel to provide excellent acceleration and top speed. The patented
bushing made of a naval brass reduces vibrations, stress on the drivetrain components and
prevents corrosion by galvanically isolating the stainless-steel propeller from the aluminum
drive casting.
•
•
•
•
•
•
Specifically designed for the Volvo Penta Forward Drive.
Strong and durable stainless-steel for excellent acceleration and top speed.
Patented bushing reduces vibrations and stress on the drivetrain.
Galvanic isolation protects the drive from corrosion caused by the propellers.
Patented flow deflector minimizes pressure and wear on the propeller shaft seals.
Three-blade front propeller and three-blade rear propeller.
DIM
DIM
Set
K2
K3
K4
Front
22417005
22417006
22417007
Rear
22414377
22414378
22414379
Set
22414383
22414384
22414385
K5
K6
K7
Front
22417008
22417009
22417010
Rear
22414380
22414381
22414382
22414386
22414387
22414388
REAR
7
5
FRONT
3
3
1
4
2
p0021620
Installation hardware, type K
Pos
Part No
Item
1
22592621
Propeller hardware kit*
2
22413546
3
60111646
4
963683
Hex socket screw
Pos
Part No
Item
5
22477740
Propeller nut, front
Propeller cone
6
22477738
Propeller nut, rear
Hex socket screw
7
22436582
Flow deflector
* Propeller hardware kit including item 2, 3, 4, 5, 6.
D U O P R O P P R O P E L L E R S F O R AQ U A M AT I C ST E R N D R I V E S
17
DPR Drives
Type GR – Stainless-steel Duoprop propellers
Developed for the DPR high-speed drive to maximize performance and efficiency.
The high-performance blade geometry and great strength ensure maximum grip and
maneuverability. Made of high-strength stainless-steel alloy for excellent durability and
corrosion resistance. Shock-absorbing rubber bushing and galvanic isolation makes it
perfectly matched for the DPR high-speed drive.
•
•
•
•
•
High-performance blade geometry, great strength, thin blades.
Excellent durability and corrosion resistance.
Shock-absorbing rubber bushing reduces vibrations and stress on the drivetrain.
Galvanic isolation protects the drive from corrosion caused by the propellers.
Three-blade front propeller and three-blade rear propeller.
DIM
Set
GR7
GR8
GR9
Front
3863492
3863493
3863494
Rear
3863501
3863503
3863505
3863502
3863504
3863506
FRONT
2
REAR
1
p0021600
Installation hardware, type GR
18
Pos
Part No
Item
1
3863213
Propeller nut, rear
2
3863211
Propeller nut, front
D U O P R O P P R O P E L L E R S F O R AQ U A M AT I C ST E R N D R I V E S
Pos
Part No
Item
21318669
Tool
DPX Drives
Type E – Stainless-steel Duoprop propellers
Developed for the DPX high-speed drive to provide maximum performance and efficiency in
speeds up to 75 knots. The high-performance blade geometry and great strength ensure
maximum grip and maneuverability. Made of high-strength stainless-steel for excellent
durability and corrosion resistance. Shock-absorbing rubber bushing and galvanic isolation
makes it perfectly matched for the DPX high-speed drive.
•
•
•
•
•
•
High-performance blade geometry, great strength, thin blades.
Excellent durability and corrosion resistance.
Designed for speeds up to 75 knots.
Galvanic isolation protects the drive from corrosion caused by the propellers.
Shock-absorbing rubber bushing reduces vibrations and stress on the drivetrain.
Three-blade front propeller and three-blade rear propeller.
DIM
Set
E2
E3
E4
Front
3860065
3860066
3860067
Rear
872422
872423
872424
3860011
3860012
3860013
FRONT
REAR
Installation hardware, type E
Pos
Part No
Item
1
872179
Propeller nut, rear
2
3851335
Propeller nut, front
Pos
Part No
Item
885195
Tool
D U O P R O P P R O P E L L E R S F O R AQ U A M AT I C ST E R N D R I V E S
19
280, 290, DP Drives
NEW
Type J – Aluminum Duoprop propellers
A completely modern aluminum propeller designed for our classic Duoprop drives. The
patented blade geometry and large propeller diameter provides optimal efficiency as well as
quiet and smooth operation. A special high-strength aluminum alloy and squeeze casting
process makes the propellers stronger and more durable than traditional die-cast propellers.
Four layers of paint ensures excellent corrosion protection performance.
•
•
•
•
•
Patented blade geometry and large active propeller diameter.
Strong and durable high-strength aluminum alloy.
Excellent anti-corrosion performance.
Three-blade front propeller and four-blade rear propeller.
Replaces type A and type B propellers (see below for details).
Note! Always use type C stainless steel propellers in engines exceeding 240 hp or capable of
speeds above 38 knots (45 mph). See next page.
DIM
DIM
Set
J2
J3
J4
J5
Front
21924262
21924263
21924264
21924265
Rear
21924222
21924223
21924224
21924225
Set
21924242
21924243
21924244
21924245
J6
J7
J8
J9
J 10
Front
21924266
21924267
21924268
21924269
21924270
21924226
21924227
21924228
21924229
21924230
Rear
21924246
21924247
21924248
21924249
21924250
Installation hardware, see next page.
Upgrade from type A or type B propellers to type J propellers
To ensure the best performance for your boat, consult your Volvo Penta dealer for advice on the right propeller size for your drive and engine.
Note! Do not mix A, B and J propellers on the same drive. Always use propellers of the same type and size on the drive
(or on both drives in twin installations).
Type A – Aluminum Duoprop propellers
Type A propeller sets are replaced by type J propeller sets. However, Type A propellers (front and
rear) are sold individually as spare parts. However, complete sets of A0 and A1 are available.
DIM
DIM
Set
A0
A1
A2
A3
A4
A5
Front
872270
854764
Rear
872259
854774
854775
854776
854777
854778
Front
872264
854784
854785
854786
854787
854788
A6
A7
A8
A9
A 10
Rear
854779
854780
854781
854782
854783
854789
854790
854791
854792
854793
Installation hardware, see next page.
Type B – Aluminum Duoprop propellers
Type B propeller sets are replaced by type J propeller sets. However, Type B propellers (front
and rear) are sold individually as spare parts.
DIM
DIM
Front
B1
B2
B3
B4
Rear
854822
854823
854824
854825
854830
854831
854832
854833
Front
B5
B6
B7
B8
Installation hardware, see next page.
20
D U O P R O P P R O P E L L E R S F O R AQ U A M AT I C ST E R N D R I V E S
Rear
854826
854827
854828
854829
854834
854835
854836
854837
280, 290, DP Drives
Type C – Stainless-steel Duoprop propellers
This is the perfect upgrade for enhanced performance, strength and durability. It provides
better acceleration and higher top speed through greater strength and thinner blades versus a
comparable aluminum propeller. The stainless-steel material makes the propellers durable and
highly resistant to cavitation, damage and corrosion. Complete with shock-absorbing rubber
bushing and galvanic isolation in the hub.
•
•
•
•
•
Enhanced acceleration and top speed versus a comprable aluminum propeller.
Excellent strength, durability and corrosion resistance.
Shock-absorbing rubber bushing reduces vibrations and stress on the drivetrain.
Galvanic isolation protects the drive from corrosion caused by the propellers.
Three-blade front propeller and three-blade rear propeller.
DIM
DIM
Set
C2
C3
C4
Front
3588222
3588223
3588224
Rear
3587864
3587865
3587866
Set
3587870
3587871
3587872
C5
C6
C7
Front
3588225
3588226
3588227
Rear
3587867
3587868
3587869
3587873
3587874
3587875
FRONT
11
7 ***
10
REAR
9
8
1
2
3
M16
4
6
5
M20
p0021628
Installation hardware, type A, B, C, J
Pos
Part No
Item
1
872614
Propeller cone kit M16*
Pos
Part No
Item
8
854294
Plastic washer
2
941670
Washer M8
9
3858458
Thrust ring
3
852216
Lock screw M8
10
3851334
Propeller nut
4
872549
Propeller cone kit M20**
11
3858457
Thrust ring
5
943194
Washer M12
854668
Tool, propeller cone M16
873058
Tool kit, propeller nut
6
872546
Lock screw M12
7
853676
Spacer ring for propeller cone ***
* Propeller cone kit M16 including item 1, 2, 3, 7, 8.
** Propeller cone kit M20 including item 4, 5, 6, 7, 8.
*** Spacer ring for propeller cone only to be used with type A propellers.
D U O P R O P P R O P E L L E R S F O R AQ U A M AT I C ST E R N D R I V E S
21
22
P R O P E L L E R S F O R V O LV O P E N TA I P S
Propellers for Volvo Penta IPS
Faster, further, cleaner
and quieter
When Volvo Penta launched the revolutionary IPS (Inboard Performance System) we set a
completely new standard in efficiency, comfort and maneuverability. By turning the propellers
around to a forward-facing position, the world of boating changed forever. These twin counterrotating propellers form an important part the hydro-dynamically designed propulsion unit
– pulling the boat through the water rather than pushing it.
The state-of-the-art IPS propellers are developed, tested and manufactured with the highest precision. Not
only do they contribute to outstanding performance
Precise balancing gives minimal
vibrations, quiet and comfortable
operation. It is also essential for
efficiency and minimizes wear on
the drivetrain.
and fuel efficiency, but also handling and onboard
comfort – all this while securing the service life of
your drive.
Fully CNC machining ensures
exact tolerances and perfect
geometry of each propeller,
which results in total precision
and outstanding performance.
Optimal interaction between the
front and rear propeller ensures
maximum performance and fuel
efficiency throughout the entire
speed range, as well as smooth
and comfortable running.
Patented Flow deflector at the
rear propeller controls the water
flow and minimizes pressure and
wear on the propeller shaft seals.
Extremely strong and specially developed nibral
(nickel-bronze-aluminum) alloy ensures minimum
growth, excellent durability and corrosion resistance.
Optimized torque distribution between
front and rear propellers ensures that the
drive works with the load it is designed
for – essential in preserving the life of the
drivetrain.
P R O P E L L E R S F O R V O LV O P E N TA I P S
23
IPS 1
Type T/TS – Nibral propellers
The state-of-the-art IPS propellers are developed, tested and manufactured with the highest
precision to give outstanding efficiency, onboard comfort and maneuverability. The extremely
strong and specially developed nibral (nickel-bronze-aluminum) alloy ensures minimum
growth, excellent durability and corrosion resistance.
•
•
•
•
•
Outstanding efficiency, maneuverability and comfort.
Extremely strong nibral (nickel-bronze-aluminum) alloy.
Excellent durability, minimal marine growth.
Patented flow deflector minimizes pressure and wear on the propeller shaft seals.
Three-blade front propeller and four-blade rear propeller.
DIM
DIM
Set
TS3
TS4
TS5
TS6
T2
T3
T4
Front
21368025
21368016
21258473
21368012
3861092
3861095
3861098
Rear
21368026
21368017
21258474
21368013
3861093
3861096
3861099
Set
21368027
21368018
21258475
21368014
3861094
3861097
3861100
T5
T6
T7
T8
T9
T10
Front
3861101
3861104
3861107
3861110
3861113
3861116
Rear
3861102
3861105
3861108
3861111
3861114
3861117
3861103
3861106
3861109
3861112
3861115
3861118
The type T/TS series covers applications from semi-planing boats with moderate top speeds to planing boats with high top speeds.
TS3
TS4
TS5
TS6
T2
T3
T4
T5
T6
T7
T8
T9
Moderate top speed
REAR
9
7
6
FRONT
1
8
4
5
2
3
3
3
A **
P0021571
Installation hardware, type T/TS
Pos
Part No
Item
1
22659020
Propeller cone kit*
Pos
6
Part No
21686492
Item
Line cutter
2
22072153
Propeller cone
7
3861209
Lock ring
3
963699
Hex socket screw
8
3861087
Lock nut, rear
4
3861088
Lock plate
9
3862454
Flow deflector
5
21293480
Propeller nut, front
* Propeller cone kit including cone (2), 9 pcs hex socket screw (3), lock plate (4), propeller nut (5), lock ring (7), grease and tool.
** IPS1-A, IPS1-B, IPS1-C earlier propeller cone and hardware (A) is replaced by propeller cone kit (1).
24
T10
High top speed
P R O P E L L E R S F O R V O LV O P E N TA I P S
IPS 2
Type P/PS – Nibral propellers
The state-of-the-art IPS propellers are developed, tested and manufactured with the highest
precision to give outstanding efficiency, onboard comfort and maneuverability. The extremely
strong and specially developed nibral (nickel-bronze-aluminum) alloy ensures minimum
growth, excellent durability and corrosion resistance.
•
•
•
•
•
Outstanding efficiency, maneuverability and comfort.
Extremely strong nibral (nickel-bronze-aluminum) alloy.
Excellent durability, minimal marine growth.
Patented flow deflector minimizes pressure and wear on the propeller shaft seals.
Three-blade front propeller and four-blade rear propeller.
DIM
DIM
Set
PS4
PS5
P1
P2
P3
Front
21622828
21622827
3843980
3843956
3843959
Rear
21622814
21622813
3843981
3843957
3843960
Set
21622823
21622822
3843982
3843958
3843961
P4
P5
P6
P7
Front
3843962
3843965
3843968
3843971
Rear
3843963
3843966
3843969
3843972
3843964
3843967
3843970
3843973
The type P/PS series covers applications from semi-planing boats with moderate top speeds to planing boats with high top speeds.
PS4
PS5
P1
P2
P3
P4
P5
Moderate top speed
P6
P7
High top speed
REAR
FRONT
Installation hardware, type P/PS
Pos
Part No
Item
Part No
Item
1
21154200
Propeller cone
Pos
5
21686494
Line cutter
2
963699
Hex socket screw
6
21154277
Propeller nut, rear
3
21154206
Propeller nut, front
7
3843992
Flow deflector
4
3593639
Felt washer
P R O P E L L E R S F O R V O LV O P E N TA I P S
25
IPS 3
Type Q/QS – Nibral propellers
The state-of-the-art IPS propellers are developed, tested and manufactured with the highest
precision to give outstanding efficiency, onboard comfort and maneuverability. The extremely
strong and specially developed nibral (nickel-bronze-aluminum) alloy ensures minimum
growth, excellent durability and corrosion resistance.
•
•
•
•
•
Outstanding efficiency, maneuverability and comfort.
Extremely strong nibral (nickel-bronze-aluminum) alloy.
Excellent durability, minimal marine growth.
Patented flow deflector minimizes pressure and wear on the propeller shaft seals.
Three-blade front propeller and four-blade rear propeller.
DIM
DIM
Set
QS5
Q1
Q2
Q3
Front
21821365
21433621
21433622
21433623
Rear
21821255
21433601
21433602
21433603
Set
21821265
21433611
21433612
21433613
Q4
Q5
Q6
Q7
Front
21433624
21433625
21433626
21433627
Rear
21433604
21433605
21433606
21433607
21433614
21433615
21433616
21433617
The type Q/QS series covers applications from semi-planing boats with moderate top speeds to planing boats with high top speeds.
QS5
Q1
Q2
Q3
Q4
Q5
Moderate top speed
FRONT
Installation hardware, type Q/QS
1
26
Q7
High top speed
REAR
Pos
Q6
Part No
Item
40005165
Propeller cone
Pos
Part No
Item
4
21235219
Felt washer
2
963699
Hex socket screw
5
21686496
Line cutter
3
40005157
Propeller nut, front
6
40005161
Propeller nut, rear
P R O P E L L E R S F O R V O LV O P E N TA I P S
Line cutter for IPS
Efficient. Sharp. Easy to install.
The line cutter is an easy to install accessory that provides additional protection in waters
where it may be required. It is designed to cut through ropes, fishing lines, plastic bags and
nets before they can enter between the propellers and possibly cause damage to the propeller
shaft sealing.
•
•
•
•
•
Cuts up ropes, fishing lines, plastic bags etc.
Protects propeller shaft sealing.
Easy to install using existing bolts.
Requires no drilling.
Adds no drag or fuel consumption.
The line cutter is available for all Volvo Penta IPS models.
Fits
IPS1
IPS2
IPS3*
Part No.
21686492
21686494
21686496
Diameter
95 mm / 3,7”
120 mm / 4,7”
140 mm / 5,5”
Material
316 Stainless steel
316 Stainless steel
316 Stainless steel
* Included as standard from SN 3950001773.
The line cutter is mounted to the rear propeller which creates a very
efficient rotating cutting action. It is easy to install using the existing
locking bolts and does not increase drag or fuel consumption.
L I N E C U T T E R F O R V O LV O P E N TA I P S
27
28
PROPELLERS FOR S-DRIVES AND SHAFTS
Propellers for S-drive and shafts
Streamline
your sailing
A Volvo Penta folding propeller offers up to 1.5 knots higher speed under sail compared
with a fixed propeller – greatly adding to sailing pleasure. In addition, high thrust under
motoring makes our folding propellers stand out from the competition. Thanks to the high
performance of the blades, even in reverse, Volvo Penta folding propellers provide excellent
close-quarter maneuverability.
The unique, patented blade profile ensures effective,
low-noise operation with minimal vibrations. And,
what’s more, the blades open and close using a
reliable conical teeth mechanism. All Volvo Penta
folding propellers are made of a specially developed,
corrosion resistant nickel-aluminum-bronze alloy. Drag (N)
Folded for less drag and more speed
The lower drag produced by the Volvo Penta folding
propellers can increase sailing speed by up to 1.5 knots.
The graph shows how rapidly the propeller drag increases with higher speed. At 8 knots for example, a 3-blade
fixed propeller produces more than six times the drag
of a 3-blade folding propeller. The test was carried out
by SSPA Maritime Consulting. Propellers mounted on
S-drives were measured.
Choose your propeller
You can choose from 2, 3 and 4 blade folding propellers
for both S-drives and shaft installations.
Knots
S-Drive and shaft
Engine power
Folding propellers, 2-blade
5-40 hp
2-blade folding
2-blade fixed
Folding propellers, 3-blade
20-60 hp
3-blade folding
3-blade fixed
Folding propellers, 4-blade
55-120 hp
4-blade folding
PROPELLERS FOR S-DRIVES AND SHAFTS
29
S-Drive and shaft
2-blade folding propeller för 5-40 hp
Available for both sail drive and shaft. Propeller size has to be calculated to match engine and
gear ratio, please contact your Volvo Penta dealer. Note! For a complete propeller, order one blade
kit and one hub kit.
Blade kits*
S-Drive & Shaft
Shaft
Ø x PITCH
LH
14 x 7
14 x 8
15 x 8
15 x 10
16 x 10
16 x 11
17 x 11
17 x 12
18 x 12
19 x 13
RH
21629132
21629140
21629147
21629158
21629173
21629182
21629190
21629198
21629205
21629214
21629136
21629144
21629152
21629167
21629177
21629186
21629194
21629201
21629211
21629218
Hub kits for 2-blade folding propeller *
S-DRIVE
SHAFT
S-drive 120/130/S
MS25S, 150S
21630720
Shaft 25 mm
Taper 1:10
Key 6 mm
21630721
Shaft 30 mm
Taper 1:10
Key 8 mm
21630722
Shaft 1 1/4”
Taper 1:16
Key 5/16
21630724
Shaft 1”
Taper 1:16
Key 1/4
21630723
HUB KIT
Pre-drilled,
21630725
* For a complete propeller, order one blade kit and one hub kit.
S-DRIVE
4
SHAFT
3
4
5
1
6
2
7
9
8
10
11
Installation hardware, 2-blade folding
30
Pos
Part No
Qty
Pos
Part No
Qty
1
873475
1
Tab washer, M16
Item
7
946730
1
Item
1
873488
1
Tab washer, M20
8
3581246
2
Screw
2
873473
1
Nut, prop shaft, M16
9
963677
3
Hex. socket screw
Hex. socket screw
Hexagon screw
2
873486
1
Nut, prop shaft, M20
10
963675
2
3
873474
1
Key, prop shaft, Ø25mm
11
3595221
2
Lock screw
3
873487
1
Key, prop shaft, Ø30mm
1161053
1
Locking fluid
4
21626924
2
Shaft
828250
1
Lubricating grease 25g
5
3584466
1
Propeller nut
21347121
1
Grease, propeller shaft 400ml
6
3851994
1
Lock washer
PROPELLERS FOR S-DRIVES AND SHAFTS
S-Drive and shaft
3-blade folding propeller for 20-60 hp
Available for both sail drive and shaft. Propeller size has to be calculated to match engine and
gear ratio, please contact your Volvo Penta dealer. Note! For a complete propeller, order one blade
kit and one hub kit.
Blade kits*
S-Drive & Shaft
Shaft
Ø x PITCH
LH
14 x 7
14 x 8
14 x 9
15 x 9
15 x 10
16 x 10
16 x 11
17 x 11
17 x 12
18 x 12
18 x 13
18 x 14
18 x 15
18 x 16
19 x 16
RH
—
—
3583382
3583383
3583384
3583385
3583386
3583387
3583388
3583389
3583390
3583391
3583392
3584031
3583393
3583409
3583410
3583411
3583412
3583413
3583414
3583415
3583416
3583417
3583418
3583419
3583420
3583421
3583422
3583423
Hub kits for 3-blade folding propeller *
S-DRIVE
SHAFT
S-drive 110/S,
120/S, MS25S/SR
3858955
Shaft 25 mm
Cone ratio 1:10,
Wedge 6 mm,
3583424
Shaft 30 mm
Cone ratio 1:10,
Wedge 8 mm,
3583425
Shaft 1”
Cone ratio 1:16,
Wedge 1/4”,
3583426
Shaft 11/4”
Cone ratio 1:16,
Wedge 5/16”,
3583427
HUB KIT
Pre-drilled,
3583428
* For a complete propeller, order one blade kit and one hub kit.
S-DRIVE
4
SHAFT
4
1
7
5
6
2
3
8
9
10
10
Installation hardware, 3-blade folding
Pos
Part No
Qty
Pos
Part No
Qty
1
873474
1
Key, prop shaft, Ø25mm
Item
6
3851994
1
Item
1
873487
1
Key, prop shaft, Ø30mm
7
946730
1
Hexagon screw
2
873475
1
Tab washer, M16
8
3581246
3
Screw
Hex. socket screw
Lock washer
2
873488
1
Tab washer, M20
9
963677
3
3
873473
1
Nut, prop shaft, M16
10
963695
3
Hex. socket screw
3
873486
1
Nut, prop shaft, M20
828250
2
Lubricating grease 25g
4
3581243
3
Shaft
21347121
1
Grease, prop shaft 400ml
5
3584466
1
Propeller nut
1161053
1
Locking fluid 10ml
PROPELLERS FOR S-DRIVES AND SHAFTS
31
S-Drive and shaft
4-blade folding propeller for 55-120 hp
Available for both sail drive and shaft. Propeller size has to be calculated to match engine and
gear ratio, please contact your Volvo Penta dealer. Note! For a complete propeller, order one blade
kit and one hub kit.
Blade kits*
S-Drive & Shaft
Shaft
Ø x PITCH
LH
20 x 14
21 x 15
22 x 16
22 x 18
22 x 20
RH
3583917
3583919
3583921
3583923
3583925
3583918
3583920
3583922
3583924
3583926
Hub kits for 4-blade folding propeller *
S-DRIVE
SHAFT
S drive 120/S,
MS25S
3583927
Shaft 25 mm
Taper 1:10,
Key 6 mm
3583928
Shaft 30 mm
Taper 1:10,
Key 8 mm
3583929
Shaft 35 mm
Taper 1:10,
Key 10 mm
3583930
Shaft 40 mm
Taper 1:10,
Key 12 mm
3584137
Shaft 1 1/4”
Taper 1:16,
Key 5/16
3583931
Shaft 1 1/2”
Taper 1:16,
Key 3/8
3583932
* For a complete propeller, order one blade kit and one hub kit.
S-DRIVE
3
SHAFT
8
3
4
2
5
1
6
8
7
9
9
10
10
Installation hardware, 4-blade folding
32
Pos
Part No
Qty
1
873473
1
Item
Nut, prop shaft, M16
Pos
Part No
Qty
4
873496
1
Key, prop shaft, Ø35mm
Item
1
873486
1
Nut, prop shaft, M20
4
873505
1
Key, prop shaft, Ø40mm
1
3587422
1
Nut, prop shaft, M24
5
3584466
1
Propeller nut
2
873475
1
Tab washer, M16
6
3851994
1
Lock washer
2
873488
1
Tab washer, M20
7
946730
1
Hexagon screw
2
873506
1
Tab washer, M24
8
3581246
2
Screw
3
3583951
4
Shaft
9
963677
3
Hex. socket screw M5x16
10
4
873474
1
Key, prop shaft, Ø25mm
4
873487
1
Key, prop shaft, Ø30mm
PROPELLERS FOR S-DRIVES AND SHAFTS
963695
4
Hex. socket screw M6x14
828250
2
Lubricating grease 25g
21347121
1
Grease, prop shaft 400ml
Fixed propellers for S-Drive
Fixed propellers
Volvo Penta’s fixed propellers for S-drives are manufactured of aluminium alloys, developed to
withstand salt water and cavitation damage. The propellers are manufactured to a high and
consistent quality under rigid quality controls.
2-blade (S-drives 110S, 120S, 130S and 150S)
Ø x PITCH
14 x 7
14 x 8
14 x 9
14 x 11
15 x 11
16 x 11
16 x 13
17 x 14
17 x 16
17 x 17
19 x 17
21351239
21351270
21351241
21351275
21351281
21351235
21351240
21351232
21351265
21353570
21351284
3-blade (S-drives 110S, 120S, 130S and 150S)
Ø x PITCH
14 x 9
14 x 11
14 x 12
15 x 12
15 x 13
16 x 11
17 x 12
17 x 13
17 x 14
17 x 15
17 x 16
18 x 16
21381258
21381260
21381262
21381264
21381265
21381283
21381274
21381275
21401615
21381279
21381280
21381042
2-Blade (S-drives 50S, 100S)
Ø x PITCH
MD6A
MB10A, MD11C
14 x 8
16 x11
839514
839191
Installation hardware, S-Drive
Part No
Description
Part No
Description
22629322
Propeller cone kit
828250
Lubricating grease 25g
851773
Screw
21347121
Grease, propeller shaft 400ml
850888
Plastic washer
PROPELLERS FOR S-DRIVES
33
Anodes for drives and propellers
Volvo Penta
anodes
Anodes are to be sacrificed in order to protect the drive unit and propeller against galvanic
corrosion. Volvo Penta anodes are tested and specially produced for Volvo Penta drives and
propellers.
The specifications are, in certain cases, more stringent than any other marine materials standards in
the world. If 50% or more of the anode has been
consumed it must be replaced in order to, once
Type of water
Find our general recommendation on which type of anode
should be used in what water type in below table.
Saltwater
– Zinc
Brackish water – Aluminum
Freshwater
– Magnesium
Zinc and aluminum anodes will if left in freshwater become
covered with a white oxide which effectively passivate the
anode, zinc anodes suffer a similar problem even in
brackish water.
If the anode becomes passive, the drive will start to sacrifice
itself, this will cause serious damage. Magnesium
anodes will wear off much to fast in saltwater.
34
ANODES
more, fulfil its vital function. Never jeopardize safety
and performance by fitting a non-genuine anode.
Remember to never paint over the anodes.
Anodes for drives and propellers
Lower Gear Anode
Single Aquamatic
100 drive
200 – 290 SP drives
Duoprop Aquamatic
280 – 290 DP drive
DPX drive
SX-A,DPS-A/B/FWD
SX / DP-S
DPH drive
DPR drive
Zinc
Magnesium
875810
875815
876137
875821
876138
Spray Plate Anode
Zinc
Magnesium
Aluminium
876638
3888814
3855411
3588746
3589875
3888815
3855412
3588750
3589877
3888813
3863193
3588748
3589876
S-drive
876286
3888305
120S
130S /150S (2 pice)
876604
3888306
Transom Shield Anode
Zinc
Aquamatic
280 drive
290 SP, DP drive
DPX drive
SX-A,DPS-A/B/FWD
SX / DP-S
DPH drive
DPR drive
832598
852835
872139
3888817
3854130
3588745
3588745
Magnesium
873179
873178
3888818
3855610
3588768
3588768
Propeller Anode
Aluminium
3888816
3586461
3588770
3588770
Zinc
Magnesium
Propellers for S-drive
Folding propeller – 2 blade
Folding propeller – 3 blade
Folding propeller – 4 blade
3858399
3858399
3584442
3858400
3858400
3584443
Propellers for Shafts
Folding propeller – 2 blade
Folding propeller – 4 blade
3888491
3584442
3888493
3584443
Fixed propeller
For 30 mm propeller shaft W3/4
For 35 mm propeller shaft W7/8
For 40 and 45 mm propeller shaft W1
For 25 mm propeller shaft M16
For 30 mm propeller shaft M20
For 35 and 40 mm propeller shaft M24
For 45 mm propeller shaft M30
833913
833915
828140
873411
873412
873413
873415
Anode
Volvo Penta IPS
Lower Gear Anode
Transom Anode
ACP
3593981
40005875
21174476
Please contact your local Volvo Penta dealer for further information. Please note that products illustrated may differ from production models. Not all models and accessories are available in all markets, and
standard equipment may vary between different markets. Every effort has been made to ensure that facts and figures are correct at the time of publication. However, Volvo Penta reserves the right to make
changes without prior notice at any time.
ANODES
35
47706849 English 07-2015
www.volvopenta.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising