Acura | 2009 RDX | 2009 RDX Personalized Settings

2009 Acura RDX
Personalized Settings
T
he Acura RDX and the RDX with Technology Package are equipped with
a number of convenience features that can be customized to your client's
preferences. Personalize the settings for your client as listed below. Additional
details are contained in the Quick Start Guide, Owner's Manual, and Navigation
System Manual. NOTE: The default factory settings appear in BOLD print.
Multi-Information Display (MID) Personalized Settings
Keyless
Remote
Setup
Client
Name
VIN
1
Driving Position Memory System (DPMS)
(1) Turn the ignition switch to ON (II).
(2) Position the driver's seat and outside mirrors to the Primary Driver's preferences.
(3) Confirm that the Primary Driver will use Keyless Remote #1.
(4) Program/Link Keyless Remote #1 to the Driving Position Memory System (DPMS).
(5) If a 2nd Driver is present, offer to program/link Keyless Remote #2 to his or her seat and mirror position preferences.
(6) If the 2nd driver is not present, advise the client that you have set keyless remote #1 for Driver 1. Confirm that the instructions to set the
DPMS are in the Owner's Manual. Advise the client to contact you if they cannot successfully set Keyless Remote #2 for Driver #2.
2
MULTI-INFORMATION DISPLAY (MID) Customization
(1) Refer to the Owner's Manual Multi-Information Display (MID) section for complete instructions.
(2) Put the transmission in Park and set the parking brake.
(3) Turn the ignition switch to the ON (II) position.
(4) Press the INFO ( ▲ / ▼ ) button on the right side of the steering wheel for at least 3 seconds.
Note: Each time you press the INFO ( ▲ / ▼ ) button, the screen will change.
(5) Continue to press the INFO button ( ▲ / ▼ ) until you see the setup you want to customize.
(6) Press the SEL/RESET button to enter your selection.
(7) Always use the INFO buttons ( ▲ / ▼ ) on the steering wheel to move between settings.
(8) Use the SEL/RESET button on the steering wheel to enter your selections.
(9) Show the client how to change one of the settings in the MID. Then, confirm that the
client can change one of the settings while you watch.
3
MID
DISPLAY
MID BUTTONS
Language Selection Select the language used in the multi-information display (MID).
(1) The SETTING you want to change is METER SETUP.
(2) The SELECTION you want to choose is LANGUAGE SELECTION.
ENGLISH
SPANISH
FRENCH
Interior Light Dimming Time Select how long the vehicle interior lights remain on after closing all of the doors.
4
Interior lights are turned to the OFF position during TQI to conserve the vehicle’s battery. To eliminate confusion, make sure
all interior lights are set to the DOOR position. This includes a rear cargo light on select models.
NOTE: It is important to advise the client that primary controls on the light will control MID time setting.
15 seconds
5
6
7
30 SECONDS
60 seconds
Headlight Auto Off Timer When the driver removes the ignition key and closes the door, the headlights and exterior lights will go off after:
0 seconds
15 SECONDS
30 seconds
60 seconds
Door Lock Mode Select which doors unlock when you press the remote transmitter "unlock" button one time,
or when you unlock the driver's door with the key.
DRIVER DOOR
THE DRIVER'S DOOR UNLOCKS
ALL DOORS
All doors unlock
Auto Door Lock Select when the doors automatically lock.
SHIFT FROM "P"
The doors will lock when shift lever is moved out of Park (P)
WITH VEHICLE SPEED
THE DOORS WILL LOCK WHEN VEHICLE SPEED REACHES 10 mph (approximately)
OFF
Auto door lock function is deactivated all of the time
Auto Door Unlock Select when the doors automatically unlock.
SHIFT TO "P" DRIVER DOOR
DRIVER DOOR UNLOCKS WHEN SHIFT LEVER IS MOVED INTO PARK (P)
8
9
10
11
12
SHIFT TO "P" ALL DOORS
All doors unlock when shift lever is moved into PARK (P)
IGN OFF DRIVER DOOR
IGN OFF ALL DOORS
Driver door unlocks when ignition switch is turned off
All doors unlock when ignition switch is turned off
OFF/DEACTIVATED
Auto door unlock function is deactivated
Keyless Lock Acknowledgement The exterior lights flash each time you press the LOCK or UNLOCK button.
A beep will also sound when you press the LOCK button twice.
ON
OFF
Security Relock Timer If you unlock the doors using a remote transmitter but do not open a door, the vehicle will automatically relock in:
30 SECONDS
60 seconds
90 seconds
RADIO PRESETS Store up to 18 broadcast radio stations in AM/FM band, and 12 XM ® Satellite Radio channels in the preset (1-6) buttons.
NOTE: Functions that rely on a satellite signal, such as XM Satellite Radio, do not operate in Alaska or Hawaii
To store a station:
(1) Use the tune, seek, or scan function to tune the radio to a desired station.
(2) Pick a preset number button (1-6).
(3) Press the button until you hear a beep.
AM
XM1
FM1
XM2
FM2
NAVIGATION SYSTEM - HOME ADDRESS (If equipped with Navigation System). NOTE: The Navigation System does not operate in Alaska.
(1) Instruct your client on how to enter a destination address.
(2) Help your client set up the "Go Home" (client address) in the system.
(3) Explain voice activation and have your client enter another destination.
(4) Show the location of the microphone and explain the importance of
speaking in a normal tone of voice.
(5) Show client the location of the "NAVI TALK" button on the steering wheel.
(6) Show client the location of the "NAVI BACK" button on the steering wheel.
(7) Show client the Commonly Used Voice Commands in the Quick Start Guide.
(8) Have the client enter an address other than home to try different routing methods.
(on the ceiling console)
(9) Show the client the navigation manual to be used as a reference guide.
Other Personalized Settings
13
Bluetooth® HandsFreeLink® (BHFL)
To confirm that the client's cell phone is compatible with Bluetooth HandsFreeLink AND to view/confirm phone pairing information:
PHONE SET-UP
(1) Go to: www.acura.com/handsfreelink - or - Call: Bluetooth HandsFreeLink client support at (888) 528-7876.
NOTE: To use Bluetooth HandsFreeLink, the phone must have approved Bluetooth capability, along with the Hands Free Profile.
(2) Pair the client's phone at this time.
- To pair the phone, get the pairing instructions from www.acura.com/handsfreelink
- Then go to the vehicle and pair the phone according to those instructions
- After you have finished pairing the phone, a message will appear on the navigation
screen, asking if you wish to continue by setting up AcuraLink. Finish this section first.
(3) Reconfirm phone linkage To reconfirm phone linkage, do the following:
BHFL "TALK" (top left)
BHFL
- Turn off the phone
BHFL "BACK" (top right)
- Turn off the engine
- Turn the phone on again
- Restart the vehicle
USAGE
BHFL
NAVI "TALK" (bottom left)
(1) Show the client the location of the "BHFL TALK" button on the steering wheel.
NAVI "BACK" (bottom right)
(2) Show the client the location of the "BHFL BACK" button on the steering wheel.
NOTE: Command must begin with "Call" or "Dial" - followed by the telephone number.
(3) To improve client's experience with system, advise client to:
(A) Avoid select text:
- “Home”
- Single syllable name entries
(B) Use multi-syllabic name entries (Pete → PE-TER)
(C) Use “System Help” if they need help.
(D) Always speak in a normal tone of voice (yelling, such as when frustrated, decreases recognition).
(4) Confirm that the client can successfully receive a test call.
(5) Make sure to complete follow-up call to client as soon as they leave the dealership.
14
AcuraLink Provides direct communication between the vehicle and the Acura Server. It works through XM Satellite Radio, and in
conjunction with the vehicle's navigation, Bluetooth HandsFreeLink , and audio systems to send and receive several kinds of messages.
AcuraLink comes ONLY in RDX vehicles that are equipped with Technology Package (except in Alaska and Hawaii).
(1) Ask the client if their cell phone has modem capability (also known as Bluetooth Dial-Up Network Profile).
(NOTE: Modem capability is not usually provided in a basic contract. Cell phone providers charge extra for that option).
(2) If the client's cell phone does not have modem capability, disregard this section.
(3) If the client's cell phone does have modem capability, confirm that the phone has already been paired.
(4) Then with the client present, go to the Owner Link website at www.owners.acura.com
(5) Choose the information the client wishes to receive.
(6) If client's phone is not AcuraLink compatible, make sure to review the standard messages to assist the client with the new vehicle.
Client's Signature
© 2008 American Honda Motor Co., Inc. - All Rights Reserved
Date
Sales Consultant's Signature
Date
BPS 39175 (0804)
Reorder #E2439
Download PDF