HP | 512424-001 | System information | HP 512424-001 System information

HP Pavilion dv3 Entertainment PC
Maintenance and Service Guide
Document Part Number: 512424-001
April 2009
This guide is a troubleshooting reference used for maintaining and servicing the computer. It provides
comprehensive information on identifying computer features, components, and spare parts; troubleshooting
computer problems; and performing computer disassembly procedures.
© Copyright 2009 Hewlett-Packard Development Company, L.P.
Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Intel, Core, Celeron, and
Pentium are trademarks of Intel Corporation in the U.S. and other countries. Microsoft, Windows, and Windows Vista are U.S.
registered trademarks of Microsoft Corporation. SD Logo is a trademark of its proprietor.
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in
the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an
additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
First Edition: April 2009
Document Part Number: 512424-001
Safety warning notice
Å
WARNING: To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly
on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface,
such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow
the AC adapter to contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the
AC adapter comply with the user-accessible surface temperature limits defined by the International Standard for Safety of
Information Technology Equipment (IEC 60950).
Contents
1 Product description
2 External component identification
Top components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Buttons and fingerprint reader (select models only). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pointing devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Front components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Right-side components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Left-side components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bottom components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2–1
2–1
2–2
2–3
2–4
2–5
2–6
2–7
2–8
2–9
3 Illustrated parts catalog
Serial number location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–1
Computer major components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–2
AntiGlare display assembly subcomponents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–10
BrightView display assembly subcomponents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–11
Plastics Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–12
Mass storage devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–13
Miscellaneous parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–14
Sequential part number listing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–15
4 Removal and replacement procedures
Preliminary replacement requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1
Tools required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1
Service considerations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1
Plastic parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1
Grounding guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–2
Component replacement procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–5
Serial number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–5
Computer feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–6
Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–6
Hard drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–8
Memory module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–10
WLAN module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–11
WWAN module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–15
SIM slot board. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–16
RTC battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–18
Optical drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–19
Keyboard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–21
Maintenance and Service Guide
iv
Switch cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Speaker assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Top cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fingerprint reader board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LED board. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bluetooth module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Audio board. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
USB board. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power connector and cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System board. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fan/heat sink assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4–25
4–27
4–28
4–37
4–41
4–42
4–43
4–44
4–45
4–46
4–47
4–50
4–55
5 Setup Utility
Starting the Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Setup Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the language of the Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Navigating and selecting in the Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Displaying system information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Restoring default settings in the Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Exiting the Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setup Utility menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Main menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Security menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System Configuration menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Diagnostics menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5–1
5–1
5–1
5–2
5–2
5–2
5–3
5–3
5–3
5–3
5–4
5–4
6 Specifications
Computer specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13.4-inch display specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13.3-inch display specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hard drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Blu-ray ROM DVD±R/RW SuperMulti DL Drive specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DVD±RW and CD-RW SuperMulti Double-Layer Drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . .
System DMA specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System memory map specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System interrupt specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System I/O address specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6–1
6–2
6–3
6–4
6–5
6–6
6–7
6–8
6–8
6–9
7 Screw listing
Phillips PM2.0×6.0 captive screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–1
Phillips PM3.0×4.0 screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–2
Phillips PM2.0×4.0 screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–3
Phillips PM2.5×3.0 screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–5
Phillips PM2.0×8.0 screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–7
Phillips PM2.0×3.0 screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–8
Phillips PM2.5×6.0 screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–13
Phillips PM2.5×4.0 screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–15
Phillips PM2.0×6.0 screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–16
Phillips PM2.0×7.0 captive screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–17
v
Maintenance and Service Guide
8 Backup and recovery
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Creating recovery discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Backing up your information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
When to back up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Backup suggestions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using system restore points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Performing a recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8–1
8–1
8–2
8–2
8–2
8–3
8–4
9 Connector pin assignments
Audio-in (microphone). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Audio-out (headphone) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
External monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RJ-45 (network) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Universal Serial Bus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9–1
9–1
9–2
9–3
9–4
9–4
10 Power cord set requirements
Requirements for all countries and regions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–1
Requirements for specific countries and regions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–2
11 Recycling
Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11–1
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11–1
Index
Maintenance and Service Guide
vi
1
Product description
Discrete graphics
subsystem memory
UMA graphics
subsystem memory
HP Pavilion dv3 Entertainment PC
9
9
Intel® Core™2 Duo processors:
■ T9900 3.06-GHz processor, 6-MB L2 cache,
1066-MHz front side bus (FSB)
■ T9800 2.93-GHz processor, 6-MB L2 cache,
1066-MHz front side bus (FSB)
■ T9600 2.80-GHz processor, 6-MB L2 cache,
1066-MHz FSB
■ T9550 2.66-GHz processor, 6-MB L2 cache,
1066-MHz FSB
■ P8800 2.66-GHz processor, 3-MB L2 cache,
1066-MHz FSB
■ P8700 2.53-GHz processor, 3-MB L2 cache,
1066-MHz FSB
■ P8600 2.40-GHz processor, 3-MB L2 cache,
1066-MHz FSB
■ P7550 2.26-GHz processor, 3-MB L2 cache,
1066-MHz FSB
■ P7450 2.13-GHz processor, 3-MB L2 cache,
1066-MHz FSB
9
9
9
9
Category
Description
Product Name
Processors
■ P7350 2.00-GHz processor, 3-MB L2 cache,
1066-MHz FSB
■ T6600 2.20-GHz processor, 6-MB L2 cache,
1066-MHz FSB
■ T6500 2.10-GHz processor, 6-MB L2 cache,
1066-MHz FSB
■ T6400 2.00-GHz processor, 6-MB L2 cache,
1066-MHz FSB
Intel Pentium® processors:
■ T4300 2.10-GHz processor, 1-MB L2 cache,
800-MHz FSB
■ T4200 2.00-GHz processor, 1-MB L2 cache,
800-MHz FSB
■ T3000 1.80-GHz processor, 1-MB L2 cache,
800-MHz FSB
9
Intel Celeron® T1600 1.66-GHz processor,
1-MB L2 cache, 667-MHz FSB
Chipset
Intel PM45
9
9
Intel GM45
Southbridge: ICH9m
9
9
Continued
Maintenance and Service Guide
1–1
Product description
Category
Description
Graphics
nVidia GeForce G 105M with 512 MB of
dedicated video memory
Discrete graphics
subsystem memory
UMA graphics
subsystem memory
9
9
Mobile Intel GMA 4500 MHD universal memory
architecture (UMA, integrated) with shared
video memory:
■ Up to 157 MB when system memory
≥ 1024 MB
■ Up to 669 MB when system memory
≥ 2048 MB
■ Up to 1181 MB when system memory
≥ 3072 MB
■ Up to 1181 MB when system memory
≥ 4096 MB on computer models with 32-bit
operating systems
■ Up to 1631 MB when system memory
≥ 4096 MB on computer models with 64-bit
operating systems
Panel
Memory
■ 13.4-inch, flush glass AntiGlare
(1366 × 768), high-definition (HD), LED
display assembly
■ 16:9 wide aspect ratio
■ Typical brightness: 200 nits
■ Lighted logo on display enclosure
■ All display assemblies include
2 WLAN antennas
9
9
■ 13.4-inch, BrightView (1366 × 768),
high-definition (HD), LED display assembly
■ 16:9 wide aspect ratio
■ Typical brightness: 200 nits
■ Lighted logo on display enclosure
■ All display assemblies include
2 WLAN antennas
9
9
2 customer-accessible/upgradable memory
module slots
Supports dual-channel memory
Supports up to 8 GB of system RAM
PC2-6400, 800-MHz, DDR2
Supports the following configurations:
■ 8192-MB total system memory
(4096 × 2, dual-channel)
■ 4096-MB total system memory
(2048 × 2, dual-channel)
■ 3072-MB total system memory
(2048 + 1024)
■ 2048-MB total system memory
(1024 × 2, dual-channel)
■ 2048-MB total system memory (2048 × 1)
■ 1024-MB total system memory (1024 × 1)
9
9
Continued
1–2
Maintenance and Service Guide
Product description
Discrete graphics
subsystem memory
UMA graphics
subsystem memory
Supports 9.50-mm, 6.35-cm (2.50-inch)
hard drives
Supports HP ProtectSmart
Hard Drive Protection
Customer-accessible
Serial ATA
Supports the following hard drives:
■ 500-GB, 7200- and 5400-rpm
■ 320-GB, 7200- and 5400-rpm
■ 250-GB, 7200- and 5400-rpm
■ 160-GB, 5400-rpm
9
9
Optical drives
12.7-mm tray load
Serial ATA (SATA)
Fixed (removal of 1 screw required)
Customer-accessible
Parallel ATA
Supports no-optical-drive option
Supports the following drives:
■ Blu-ray ROM DVD±R/RW SuperMulti DL
Drive with LightScribe
■ Blu-ray ROM DVD±R/RW SuperMulti DL
Drive
■ DVD±RW and CD-RW SuperMulti
Double-Layer Drive with LightScribe
9
9
Microphone
2 omni-directional, digital microphones
9
9
Audio
High-definition audio
SRS logo requirement
Integrated subwoofer
Supports Microsoft® premium requirements
2 Altec Lansing Pavilion-branded speakers
9
9
Webcam
VGA camera
Fixed (no tilt)
Activity LED
640 × 480 by 24 frames per second
9
9
Ethernet
Intel Realtek 8111C 10/100/1000 network
interface card (NIC)
9
Category
Description
Hard drives
9
Intel Realtek 8102E 10/100 NIC
Ethernet cable included
9
9
Continued
Maintenance and Service Guide
1–3
Product description
Discrete graphics
subsystem memory
UMA graphics
subsystem memory
9
9
Integrated WWAN options by way of
wireless module
2 wireless antennas built into display assembly
Supports no-WLAN option
5-band antenna support:
2100/1800/1900/800/900
SIM card option for UMTS module
Mini Card slot with USB support
Supports High-Speed Packet Access (HSPA),
Evolution Data Optimized (EVDO)
WWAN module
9
9
One ExpressCard slot, supporting optional
ExpressCard/34 cards
Digital Media Slot supporting Memory
Stick (MS), Memory Stick Pro (MSP),
MultiMediaCard (MMC), Secure Digital (SD)
Memory Card, and xD-Picture Card (XD).
Adapter (not included) provides support for
mini versions of SD, MMC, and MS Duo
9
9
Category
Description
Wireless
Integrated WLAN options by way of
wireless module
2 wireless antennas built into display assembly
Supports no-WLAN option
Support for the following WLAN formats:
■ Broadcom 4322AGN 802.11a/b/g/n
WLAN module
■ Broadcom 4322AGN 802.11a/b/g/n
WLAN module with Bluetooth
■ Atheros 9285G 802.11a/b/g/n
■ Atheros 9285G 802.11a/b/g/n with Bluetooth
■ Intel WiFi Link 5100 802.11a/b/g/n
■ Intel WiFi Link 5100 802.11a/b/g/n
with Bluetooth
■ Broadcom 4312G 802.11a/b/g
WLAN module
■ Broadcom 4312G 802.11a/b/g
WLAN module with Bluetooth
External media cards
Continued
1–4
Maintenance and Service Guide
Product description
Discrete graphics
subsystem memory
UMA graphics
subsystem memory
Audio-in (mono microphone)
Audio-out (stereo headphone)
Consumer infrared
eSATA
HDMI v. 1.3b supporting 1080p with HDCP key
HP Smart Adapter power
Multi-pin AC power
RJ-45 (Ethernet, includes link and
activity lights)
USB v. 2.0 (3)
VGA (Dsub 15-pin) supporting:
■ 1920 × 1200 external resolution at 60 GHz
■ 1600 × 1200 external resolution at 75 GHz
hot plug/unplug with auto-detect
9
9
Keyboard/pointing
devices
13-inch keyboard
Available in:
■ Black with painted finish
■ White with molded finish (Canada, Denmark,
Finland, Japan, Norway, South Korea,
and Thailand)
Backlight keyboard (Africa, Europe,
Latin America, the Middle East, and
North America)
TouchPad with 2 TouchPad buttons
Supports 2-way scroll
Taps enabled as default
9
9
Power requirements
90-W HP Smart Adapter with localized cable
plug support (3-wire plug with ground pin,
supports 3-pin DC connector)
9
Category
Description
Ports
9
65-W HP Smart Adapter with localized cable
plug support (3-wire plug with ground pin,
supports 3-pin DC connector)
Battery options:
9-cell, 2.55-Ah (83-Wh) Li-ion battery
6-cell, 2.55-Ah (55-Wh) Li-ion battery
6-cell, 2.20-Ah (47-Wh) Li-ion battery
9
9
Continued
Maintenance and Service Guide
1–5
Product description
1–6
Discrete graphics
subsystem memory
UMA graphics
subsystem memory
Security cable slot
Fingerprint reader with Digital Persona
software support
9
9
Operating system
Preinstalled:
Windows Vista® Business (32 bit)
Windows Vista Home Basic (32 bit)
Windows Vista Premium (64 and 32 bit)
Windows Vista Ultimate (64 bit)
9
9
Serviceability
End-user replaceable parts:
AC adapter
Battery (system)
Hard drive
Memory modules
RTC battery
Optical drive
WLAN module
WWAN module
9
9
Category
Description
Security
Maintenance and Service Guide
2
External component identification
Top components
Display components
Item
Component
Description
(1)
Internal display switch
Turns off the display and initiates Sleep if the display is closed while the power
is on.
(2)
Wireless antennas
On select computer models, at least 2 antennas send and receive signals
from one or more wireless devices. These antennas are not visible from the
outside of the computer.
optimal transmission, keep the areas immediately around the
✎ For
antennas free from obstructions.
(3)
Internal microphones (2)
Record sound.
(4)
Webcam light
On: The webcam is in use.
(5)
Webcam
Records audio and video and captures still photographs.
see wireless regulatory notices, refer to the section of the Regulatory, Safety and Environmental Notices that applies
✎ To
to your country or region. These notices are located in Help and Support.
Maintenance and Service Guide
2–1
External component identification
Buttons and fingerprint reader (select models only)
Item
Component
Description
(1)
Power button*
■ When the computer is off, press the button to turn on the computer.
■ When the computer is on, press the button briefly to initiate Sleep.
■ When the computer is in the Sleep state, press the button briefly to
exit Sleep.
■ When the computer is in Hibernation, press the button briefly to
exit Hibernation.
If the computer has stopped responding and Windows® shutdown
procedures are ineffective, press and hold the power button for at least
5 seconds to turn off the computer.
To learn more about your power settings, select Start > Control Panel >
System and Maintenance > Power Options.
(2)
Volume mute button
Mutes and restores speaker sound.
(3)
Volume scroll zone
To decrease the volume, slide your finger to the left on the scroll zone or tap
the minus sign. To increase the volume, slide your finger to the right on the
scroll zone or tap the plus sign.
(4)
Wireless button
Turns the wireless feature on or off but does not create a wireless
connection.
establish a wireless connection, a wireless network must already be
✎ To
set up.
(5)
Fingerprint reader (select
models only)
Allows a fingerprint logon to Windows, instead of a password logon.
*This table describes factory settings. For information about changing factory settings, refer to the user guides located in
Help and Support.
2–2
Maintenance and Service Guide
External component identification
Keys
Item
Component
Description
(1)
esc key
Displays system information when pressed in combination with the fn key.
(2)
fn key
Executes frequently used system functions when pressed in combination with
a function key or the esc key.
(3)
Windows logo key
Displays the Windows Start menu.
(4)
Spacebar
Turns the keyboard lights on and off when pressed in combination with the fn
key (select models only).
(5)
Windows applications key
Displays a shortcut menu for items beneath the pointer.
(6)
Embedded numeric keypad keys
Can be used like the keys on an external numeric keypad.
(7)
Function keys
Execute frequently used system functions when pressed in combination with
the fn key.
Maintenance and Service Guide
2–3
External component identification
Lights
Item
Component
Description
(1)
Caps lock light
On: Caps lock is on.
(2)
Power lights (2)*
■ On: The computer is on.
■ Blinking: The computer is in the Sleep state.
■ Off: The computer is off or in Hibernation.
(3)
Volume mute light
■ White: Computer sound is on.
■ Amber: Computer sound is off.
(4)
Volume down light
On: The volume scroll zone is being used to decrease speaker volume.
(5)
Volume up light
On: The volume scroll zone is being used to increase speaker volume.
(6)
Num lock light
On: Num lock is on or the embedded numeric keypad is enabled.
(7)
Wireless light
■ On: An integrated wireless device, such as a wireless local area network
(WLAN) device and/or a Bluetooth® device, is on.
■ Off: All wireless devices are off.
(8)
Battery light
■ On: A battery is charging.
■ Blinking: A battery that is the only available power source has reached a
low battery level. When the battery reaches a critical low-battery level, the
battery light begins blinking more rapidly.
■ Off: If the computer is plugged into an external power source, the light is
turned off when all batteries in the computer are fully charged. If the
computer is not plugged into an external power source, the light stays off
until the battery reaches a low battery level.
(9)
Drive light
Blinking: The hard drive or optical drive is being accessed.
*The 2 power lights display the same information. The light on the power button is visible only when the computer is open. The
power light on the front of the computer is visible whether the computer is open or closed.
2–4
Maintenance and Service Guide
External component identification
Pointing devices
Item
Component
Description
(1)
TouchPad light
■ White: TouchPad is enabled.
■ Amber: TouchPad is disabled.
(2)
TouchPad*
Moves the pointer and selects or activates items on the screen.
(3)
Left TouchPad button*
Functions like the left button on an external mouse.
(4)
TouchPad on/off button
Enables/disables the TouchPad.
(5)
TouchPad scroll zone
Scrolls up or down.
(6)
Right TouchPad button*
Functions like the right button on an external mouse.
*This table describes factory settings. To view or change pointing device references, select Start > Control Panel > Hardware
and Sound > Mouse.
Maintenance and Service Guide
2–5
External component identification
Front components
2–6
Item
Component
Description
(1)
Power light
■ On: The computer is on.
■ Blinking: The computer is in the Sleep state.
■ Off: The computer is off or in Hibernation.
(2)
Battery light
■ On: A battery is charging.
■ Blinking: A battery that is the only available power source has reached a
low battery level or a critical battery level.
■ Off: If the computer is plugged into an external power source, the light is
turned off when all batteries in the computer are fully charged. If the
computer is not plugged into an external power source, the light stays off
until the battery reaches a low battery level.
(3)
Drive light
Blinking: The hard drive or optical drive is being accessed.
(4)
Consumer infrared lens
Receives a signal from the remote control (provided with select models only).
(5)
Audio-in (microphone) jack
Connects an optional computer headset microphone, stereo array
microphone, or monaural microphone.
(6)
Audio-out (headphone) jack
Produces sound when connected to optional powered stereo speakers,
headphones, ear buds, a headset, or television audio.
Maintenance and Service Guide
External component identification
Right-side components
Item
Component
Description
(1)
ExpressCard slot
Supports an optional ExpressCard/34 module.
(2)
Digital Media Slot
Supports the following optional digital card formats: Secure Digital (SD)
Memory Card, Secure Digital Input/Output (SD I/O), MultiMediaCard (MMC),
Memory Stick (MS), Memory Stick Pro (MSP), xD-Picture Card (XD).
(3)
Digital Media Slot light
Blinking: The media card is being accessed.
(4)
eSATA/USB port
Connects a high-performance eSATA component, such as an eSATA external
hard drive, or connects an optional USB device.
(5)
HDMI port
Connects an optional video or audio device, such as a high-definition
television, or any compatible digital or audio component.
on your computer model, the computer may include an
✎ Depending
HDMI port or a USB port at this location.
(6)
RJ-45 (network) jack
Connects a network cable.
(7)
External monitor port
Connects an external VGA monitor or projector.
(8)
Vent
Enables airflow to cool internal components.
computer fan starts up automatically to cool internal components
✎ The
and prevent overheating. It is normal for the internal fan to cycle on and
off during routine operation.
(9)
Security cable slot
Attaches an optional security cable to the computer.
security cable is designed to act as a deterrent, but it may not
✎ The
prevent the computer from being mishandled or stolen.
Maintenance and Service Guide
2–7
External component identification
Left-side components
2–8
Item
Component
Description
(1)
Power connector
Connects an AC adapter.
(2)
AC adapter light
■ On: The computer is connected to external power.
■ Off: The computer is not connected to external power.
(3)
USB ports (2)
Connect optional USB devices.
(4)
Optical drive
Reads optical discs and, on select models, also writes to optical discs.
(5)
Optical drive light
Blinking: The drive is being accessed.
Maintenance and Service Guide
External component identification
Bottom components
Item
Component
Description
(1)
Battery release latch
Releases the battery from the battery bay.
(2)
Battery bay
Holds the battery.
(3)
Wireless module compartment
Holds a wireless LAN module, wireless WAN module (select models only),
and the RTC battery.
prevent an unresponsive system, replace the wireless module only
✎ To
with a wireless module authorized for use in the computer by the
governmental agency that regulates wireless devices in your country or
region. If you replace the module and then receive a warning message,
remove the module to restore computer functionality, and then contact
technical support through Help and Support.
(4)
Vents (6)
Enable airflow to cool internal components.
computer fan starts up automatically to cool internal components
✎ The
and prevent overheating. It is normal for the internal fan to cycle on and
off during routine operation.
(5)
Hard drive bay
Maintenance and Service Guide
Holds the hard drive and the memory module slots.
2–9
3
Illustrated parts catalog
Serial number location
When ordering parts or requesting information, provide the computer serial number and model number located on
the bottom of the computer.
Item
Component
Description
1
Product name
This is the product name affixed to the front of your computer.
2
Serial number (s/n)
This is an alphanumeric identifier that is unique to each product.
3
Part number/Product number (p/n)
This number provides specific information about the product’s
hardware components. The part number helps a service
technician to determine what components and parts are needed.
4
Model description
This is the alphanumeric identifier you use to locate documents,
drivers, and support for your computer.
5
Warranty period
This number describes the duration (in years) of the warranty
period for this computer.
Maintenance and Service Guide
3–1
Illustrated parts catalog
Computer major components
3–2
Maintenance and Service Guide
Illustrated parts catalog
Item
Description
Spare Part Number
(1)
Display assemblies (include 2 WLAN antenna transceivers and cables, 2 WWAN antenna transceivers and cables,
webcam, microphone, nameplate, and logo):
AntiGlare display assemblies:
■ 13.4-inch display assembly for use only with computer models with black trim
530785-001
■ 13.4-inch display assembly for use only with computer models with blue trim
538657-001
■ 13.4-inch display assembly for use only with computer models with white trim
530787-001
BrightView display assemblies:
(2)
(3)
■ 13.4-inch display assembly for use only with computer models with black trim
531787-001
■ 13.4-inch display assembly for use only with computer models with blue trim
538659-001
■ 13.4-inch display assembly for use only with computer models with white trim
531793-001
■ 13.3-inch display assembly for use only with computer models with black trim
531786-001
■ 13.3-inch display assembly for use only with computer models with blue trim
538658-001
■ 13.3-inch display assembly in for use only with computer models with white trim
531792-001
Switch cover (includes power button board and cable):
Switch cover for use only with computer models with black trim
531817-001
Switch cover for use only with computer models with blue trim
538662-001
Switch cover for use only with computer models with white trim
531818-001
Keyboards (include keyboard cable):
Keyboard with backlight (includes backlight cable; available only in black trim):
■ For use in Belgium
530646-A41
■ For use in the Czech Republic
530646-221
■ For use in Denmark, Finland, and Norway
530646-DH1
■ For use in Europe, the Middle East, and Africa
530646-B31
■ For use in France
530646-051
■ For use in French Canada
530646-121
■ For use in Germany
530646-041
■ For use in Greece
530646-DJ1
■ For use in Israel
530646-BB1
■ For use in Italy
530646-061
■ For use in Latin America
530646-161
■ For use in Portugal
530646-131
■ For use in Russia
530646-251
■ For use in Saudi Arabia
530646-171
■ For use in Spain
530646-071
■ For use in Switzerland
530646-BG1
■ For use in Turkey
530646-141
■ For use in the United Kingdom
530646-031
■ For use in the United States
530646-001
Continued
Maintenance and Service Guide
3–3
Illustrated parts catalog
Item
Description
Spare Part Number
Keyboards (Continued):
Keyboards without backlight with molded finish for use only with computer models with black trim:
■ For use in Belgium
530643-A41
■ For use in Brazil
530643-201
■ For use in the Czech Republic
530643-221
■ For use in Europe, the Middle East, and Africa
530643-B31
■ For use in France
530643-051
■ For use in French Canada
530643-121
■ For use in Germany
530643-041
■ For use in Greece
530643-DJ1
■ For use in Israel
530643-BB1
■ For use in Italy
530643-061
■ For use in Latin America
530643-161
■ For use in Russia
530643-251
■ For use in Spain
530643-071
■ For use in Switzerland
530643-BG1
■ For use in Taiwan
530643-AB1
■ For use in Turkey
530643-141
■ For use in the United Kingdom
530643-031
■ For use in the United States
530643-001
Keyboards without backlight with painted finish for use only with computer models with black trim:
■ For use in Denmark, Finland, and Norway
530644-DH1
■ For use in French Canada
530644-121
■ For use in Japan
530644-291
■ For use in Saudi Arabia
530644-171
■ For use in South Korea
530644-AD1
■ For use in Thailand
530644-281
Keyboards without backlight with molded finish for use only with computer models with blue trim:
■ For use in French Canada
538665-121
■ For use in Japan
538665-291
■ For use in South Korea
538665-AD1
■ For use in Taiwan
538665-AB1
■ For use in Thailand
538665-281
■ For use in the United States
538665-001
Continued
3–4
Maintenance and Service Guide
Illustrated parts catalog
Item
Description
Spare Part Number
Keyboards (Continued):
Keyboards without backlight with molded finish for use only with computer models with white trim:
■ For use in Belgium
539044-A41
■ For use in Brazil
539044-201
■ For use in the Czech Republic
539044-221
■ For use in Europe, the Middle East, and Africa
539044-DH1
■ For use in France
539044-051
■ For use in Germany
539044-041
■ For use in Greece
539044-DJ1
■ For use in Israel
539044-BB1
■ For use in Italy
539044-061
■ For use in Latin America
539044-161
■ For use in Portugal
539044-131
■ For use in Russia
539044-251
■ For use in Spain
539044-071
■ For use in Switzerland
539044-BG1
■ For use in Taiwan
539044-AB1
■ For use in Turkey
539044-141
■ For use in the United Kingdom
539044-031
■ For use in the United States
539044-001
Continued
Maintenance and Service Guide
3–5
Illustrated parts catalog
Item
Description
Spare Part Number
Keyboards (Continued):
Keyboards without backlight with painted finish for use only with computer models with white trim:
■ For use in Belgium
530645-A41
■ For use in Brazil
530645-201
■ For use in the Czech Republic
530645-221
■ For use in Denmark, Finland, and Norway
530645-DH1
■ For use in Europe, the Middle East, and Africa
530645-B31
■ For use in France
530645-051
■ For use in French Canada
530645-121
■ For use in Germany
530645-041
■ For use in Greece
530645-DJ1
■ For use in Israel
530645-BB1
■ For use in Italy
530645-061
■ For use in Japan
530645-291
■ For use in Latin America
530645-161
■ For use in Portugal
530645-131
■ For use in Russia
530645-251
■ For use in Saudi Arabia
530645-171
■ For use in South Korea
530645-AD1
■ For use in Spain
530645-071
■ For use in Switzerland
530645-BG1
■ For use in Taiwan
530645-AB1
■ For use in Thailand
530645-281
■ For use in Turkey
530645-141
■ For use in the United Kingdom
530645-031
■ For use in the United States
530645-001
(4)
Speaker assembly (includes speaker assembly cable)
531816-001
(5)
Top covers (include TouchPad on/off board and cable, TouchPad button board and cable, and TouchPad board
and cable):
Top covers with fingerprint reader board (include fingerprint reader board cable):
For use only with computer models with black trim
531820-001
For use only with computer models with white trim
531822-001
Top covers without fingerprint reader board:
For use only with computer models with black trim
531821-001
For use only with computer models with blue trim
538663-001
For use only with computer models with white trim
531823-001
Continued
3–6
Maintenance and Service Guide
Illustrated parts catalog
Item
Description
Spare Part Number
Plastics Kit, includes:
531808-001
(6a)
ExpressCard slot bezel
(6b)
Wireless module compartment cover
(6c)
Hard drive cover
✎ See “Plastics Kit” on page 12 for more Plastics Kit spare part information.
(7)
Fingerprint reader board (includes cable)
531828-001
(8)
LED board (includes cable)
531826-001
(9)
Bluetooth module
483113-001
Bluetooth module spare part kit does not include a Bluetooth module cable. The
✎ The
Bluetooth module cable is available using spare part number 531811-001.
(10)
Bluetooth module cable
531811-001
(11)
Audio board (includes cable)
531812-001
(12)
USB board (includes cable)
531809-001
(13)
Power connector and cable
531810-001
(14)
System board (includes replacement thermal material):
(15)
■ For use only with computer models equipped with graphics subsystems with
discrete memory
530780-001
■ For use only with computer models equipped with graphics subsystems with
UMA memory
530781-001
Processors (include replacement thermal material):
Intel Core 2 Duo processors:
■ T9900 3.06-GHz processor (6-MB L2 cache, 1066-MHz FSB)
570434-001
■ T9800 2.93-GHz processor (6-MB L2 cache, 1066-MHz FSB)
507951-001
■ T9600 2.80-GHz processor (6-MB L2 cache, 1066-MHz FSB)
507952-001
■ T9550 2.66-GHz processor (6-MB L2 cache, 1066-MHz FSB)
507953-001
■ P8800 2.66-GHz processor (3-MB L2 cache, 1066-MHz FSB)
570036-001
■ P8700 2.53-GHz processor (3-MB L2 cache, 1066-MHz FSB)
507960-001
■ P8600 2.40-GHz processor (3-MB L2 cache, 1066-MHz FSB)
507963-001
■ P7550 2.26-GHz processor (3-MB L2 cache, 1066-MHz FSB)
573076-001
■ T6600 2.20-GHz processor (6-MB L2 cache, 1066-MHz FSB)
513593-001
■ P7450 2.13-GHz processor (3-MB L2 cache, 1066-MHz FSB)
507965-001
■ T6500 2.10-GHz processor (6-MB L2 cache, 1066-MHz FSB)
572928-001
■ T6400 2.06-GHz processor (6-MB L2 cache, 1066-MHz FSB)
513592-001
■ P7350 2.00-GHz processor (3-MB L2 cache, 1066-MHz FSB)
507967-001
Intel Pentium processors:
■ T4300 2.10-GHz processor (1-MB L2 cache, 800-MHz FSB)
572929-001
■ T4200 2.00-GHz processor (1-MB L2 cache, 800-MHz FSB)
513599-001
■ T3000 1.80-GHz processor (1-MB L2 cache, 800-MHz FSB)
572926-001
Intel Celeron T1600 1.66-GHz processor (1-MB L2 cache, 667-MHz FSB)
532324-001
Continued
Maintenance and Service Guide
3–7
Illustrated parts catalog
Item
Description
(16)
Fan/heat sink assembly (includes replacement thermal material):
(17)
(18)
(19)
Spare Part Number
■ For use only with computer models equipped with graphics subsystems with
discrete memory
531814-001
■ For use only with computer models equipped with graphics subsystems with
UMA memory
531813-001
Optical drives (include bezel and bracket):
■ Blu-ray ROM DVD±R/RW SuperMulti DL Drive with LightScribe
530800-001
■ Blu-ray ROM DVD±R/RW SuperMulti DL Drive
530799-001
■ DVD±RW and CD-RW SuperMulti Double-Layer Drive with LightScribe
530798-001
Base enclosure (includes six rubber feet)
531807-001
Rubber Feet Kit (not illustrated, includes six rubber feet)
534989-001
Batteries:
■ 9-cell, 83-Wh
530803-001
■ 6-cell, 55-Wh
530802-001
■ 6-cell, 47-Wh
530801-001
(20)
HSPA EVDO WWAN module
483377-002
(21)
WLAN modules:
802.11a/b/g/n WLAN modules:
■ Broadcom 4322AGN 802.11a/b/g/n WLAN module for use in Canada,
the Cayman Islands, Guam, Puerto Rico, the United States, and the U.S. Virgin Islands
504664-001
■ Broadcom 4322AGN 802.11a/b/g/n WLAN module for use in Afghanistan, Albania,
Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia,
Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium,
Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil,
the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia,
Cameroon, Cape Verde, the Central African Republic, Chad, Colombia, Comoros,
the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti,
Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador,
Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana,
Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe,
Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary,
Iceland, India, Indonesia, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Japan, Jordan,
Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho,
Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi,
Malaysia, the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania,
Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique,
Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua,
Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay,
the People's Republic of China, Peru, the Philippines, Poland, Portugal, Qatar,
the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino,
Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone,
Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, South Korea,
Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines,
Suriname, Swaziland, Sweden, Switzerland, Syria, Taiwan, Tajikistan, Tanzania,
Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu,
Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan,
Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
504664-002
■ Atheros 9285G 802.11a/b/g/n WLAN module for use in Canada, the Cayman Islands,
Guam, Puerto Rico, the United States, and the U.S. Virgin Islands
518436-001
Continued
3–8
Maintenance and Service Guide
Illustrated parts catalog
Item
Description
Spare Part Number
802.11a/b/g WLAN modules (Continued):
■ Intel WiFi Link 5100 802.11a/b/g/n WLAN module for use in all countries and regions
except Pakistan, Russia, and the Ukraine
480985-001
■ Broadcom 4312G 802.11a/b/g WLAN module for use in Canada, the Cayman Islands,
Guam, Puerto Rico, the United States, and the U.S. Virgin Islands
504593-001
■ Broadcom 4312G 802.11a/b/g WLAN module for use in Afghanistan, Albania, Algeria,
Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria,
Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize,
Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil,
the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia,
Cameroon, Cape Verde, the Central African Republic, Chad, Colombia, Comoros,
the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti,
Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador,
Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana,
Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe,
Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary,
Iceland, India, Indonesia, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Japan, Jordan,
Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho,
Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi,
Malaysia, the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania,
Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique,
Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua,
Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay,
the People's Republic of China, Peru, the Philippines, Poland, Portugal, Qatar,
the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino,
Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone,
Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, South Korea,
Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines,
Suriname, Swaziland, Sweden, Switzerland, Syria, Taiwan, Tajikistan, Tanzania,
Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu,
Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan,
Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
504593-002
■ Intel WiFi Link 5100 802.11a/b/g WLAN module for use only in Pakistan, Russia, and
the Ukraine
482957-001
(22)
RTC battery (includes cable and double-sided tape)
531829-001
(23)
SIM slot board (includes cable)
531827-001
(24)
Memory module (800-MHz, DDR2):
(25)
■ 4-GB
530792-001
■ 2-GB
530790-001
■ 1-GB
530788-001
Hard drive (includes hard drive connector and hard drive bracket):
■ 500-GB, 7200-rpm
573738-001
■ 500-GB, 5400-rpm
530797-001
■ 320-GB, 7200-rpm
572085-001
■ 320-GB, 5400-rpm
530796-001
■ 250-GB, 7200-rpm
572084-001
■ 250-GB, 5400-rpm
530795-001
■ 160-GB, 5400-rpm
530794-001
Hard Drive Hardware Kit (not illustrated, includes hard drive connector, hard drive bracket,
and screws)
534990-001
Maintenance and Service Guide
3–9
Illustrated parts catalog
AntiGlare display assembly subcomponents
Item
Description
(1a)
Display enclosure:
Spare part number
For use only with computer models with black trim
531791-001
For use only with computer models with blue trim
538661-001
For use only with computer models with white trim
531797-001
(1b)
Display hinge covers (included with display enclosure spare part kit)
(2)
Display hinges
531780-001
(3)
Webcam/microphone module
531785-001
(4)
Display panel cable (includes webcam/microphone module cable)
531782-001
(5)
Wireless antenna set
537205-001
part kits are not available for the display bezel and display panel. If these components must be replaced, the
✎ Spare
entire display assembly must be replaced.
3–10
Maintenance and Service Guide
Illustrated parts catalog
BrightView display assembly subcomponents
Item
Description
(1)
Display bezel
(2)
(3)
Spare part number
For use only with computer models equipped with a 13.4-inch display assembly
531794-001
For use only with computer models equipped with a 13.3-inch display assembly
531788-001
Display hinges
For use only with computer models equipped with a 13.4-inch display assembly
530783-001
For use only with computer models equipped with a 13.3-inch display assembly
530782-001
BrightView display panel
For use only with computer models equipped with a 13.4-inch display assembly
531779-001
For use only with computer models equipped with a 13.3-inch display assembly
531778-001
(4)
Display panel cable (includes webcam/microphone module cable)
531782-001
(5)
Wireless antenna set
531781-001
(6)
Webcam/microphone module
531785-001
(7)
Display enclosure
For use only with computer models with black trim
531790-001
For use only with computer models with blue trim
538660-001
For use only with computer models with white trim
531796-001
Maintenance and Service Guide
3–11
Illustrated parts catalog
Plastics Kit
Item
3–12
Description
Spare part number
Plastics Kit:
531808-001
(1)
ExpressCard slot bezel
(2)
Hard drive cover (includes three captive screws, secured by C-clips)
(3)
Wireless module compartment cover
Maintenance and Service Guide
Illustrated parts catalog
Mass storage devices
Item
Description
(1)
Hard drives (include hard drive connector and hard drive bracket)
(2)
Spare part number
■ 500-GB, 7200-rpm
573738-001
■ 500-GB, 5400-rpm
530797-001
■ 320-GB, 7200-rpm
572085-001
■ 320-GB, 5400-rpm
530796-001
■ 250-GB, 7200-rpm
572084-001
■ 250-GB, 5400-rpm
530795-001
■ 160-GB, 5400-rpm
530794-001
Hard Drive Hardware Kit (includes hard drive connector, hard drive bracket,
and screws)
534990-001
Optical drives (include bezel and bracket):
■ Blu-ray ROM DVD±R/RW SuperMulti DL Drive with LightScribe
530800-001
■ Blu-ray ROM DVD±R/RW SuperMulti DL Drive
530799-001
■ DVD±RW and CD-RW SuperMulti Double-Layer Drive with LightScribe
530798-001
Maintenance and Service Guide
3–13
Illustrated parts catalog
Miscellaneous parts
Description
Spare part number
AC adapters
90-W PFC HP Smart Adapter
463955-001
65-W PFC HP Smart Adapter
463958-001
Power cords:
3–14
■ For use in Argentina
490371-D01
■ For use in Australia
490371-011
■ For use in Brazil
490371-201
■ For use in Denmark
490371-081
■ For use in Europe, the Middle East, and Africa
490371-021
■ For use in India
490371-D61
■ For use in Israel
490371-BB1
■ For use in Italy
490371-061
■ For use in Japan
490371-291
■ For use in the People’s Republic China
490371-AA1
■ For use in South Africa
490371-AR1
■ For use in South Korea
490371-AD1
■ For use in Switzerland
490371-111
■ For use in Taiwan
490371-AB1
■ For use in the United Kingdom and Singapore
490371-031
■ For use in the United States
490371-001
Screw Kit
■ Phillips PM3.0 × 4.0 screws
■ Phillips PM2.5 × 6.0 screws
■ Phillips PM2.5 × 4.0 screws
■ Phillips PM2.5 × 3.0 screws
■ Phillips PM2.0 × 8.0 screws
■ Phillips PM2.0 × 7.0 captive screws
■ Phillips PM2.0 × 6.0 captive screws
■ Phillips PM2.0 × 6.0 screws
■ Phillips PM2.0 × 4.0 screws
■ Phillips PM2.0 × 3.0 screws
531815-001
Maintenance and Service Guide
Illustrated parts catalog
Sequential part number listing
Spare part number
Description
463955-001
90-W PFC HP Smart Adapter
463958-001
65-W PFC HP Smart Adapter
480985-001
Intel WiFi Link 5100 802.11a/b/g/n WLAN module for use in all countries and regions except
Pakistan, Russia, and the Ukraine
482957-001
Intel WiFi Link 5100 802.11a/b/g WLAN module for use only in Pakistan, Russia, and the Ukraine
483113-001
Bluetooth module
Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth
✎ The
module cable is available using spare part number 531811-001.
483377-002
HSPA EVDO WWAN module
490371-001
Power cord for use in the United States
490371-011
Power cord for use in Australia
490371-021
Power cord for use in Europe, the Middle East, and Africa
490371-031
Power cord for use in the United Kingdom
490371-061
Power cord for use in Italy
490371-081
Power cord for use in Denmark
490371-111
Power cord for use in Switzerland
490371-201
Power cord for use in Brazil
490371-291
Power cord for use in Japan
490371-AA1
Power cord for use in the People’s Republic of China
490371-AB1
Power cord for use in Taiwan
490371-AD1
Power cord for use in South Korea
490371-AR1
Power cord for use in South Africa
490371-BB1
Power cord for use in Israel
490371-D01
Power cord for use in Argentina
490371-D61
Power cord for use in India
504593-001
Broadcom 4312G 802.11a/b/g WLAN module for use in Canada, the Cayman Islands, Guam,
Puerto Rico, the United States, and the U.S. Virgin Islands
Continued
Maintenance and Service Guide
3–15
Illustrated parts catalog
Spare part number
Description
504593-002
Broadcom 4312G 802.11a/b/g WLAN module for use in Afghanistan, Albania, Algeria, Andorra,
Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the
Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan,
Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria,
Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, the Central African Republic, Chad,
Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark,
Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador,
Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia,
Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea,
Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland,
Israel, Italy, the Ivory Coast, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait,
Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg,
Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall Islands,
Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco,
Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand,
Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay,
the People's Republic of China, Peru, the Philippines, Poland, Portugal, Qatar,
the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe,
Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the
Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St.
Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Syria, Taiwan,
Tajikistan, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan,
Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan,
Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
504664-001
Broadcom 4322AGN 802.11a/b/g/n WLAN module for use in Canada, the Cayman Islands, Guam,
Puerto Rico, the United States, and the U.S. Virgin Islands
504664-002
Broadcom 4322AGN 802.11a/b/g/n WLAN module for use in Afghanistan, Albania, Algeria, Andorra,
Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the
Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan,
Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria,
Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, the Central African Republic, Chad,
Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark,
Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador,
Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia,
Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea,
Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland,
Israel, Italy, the Ivory Coast, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait,
Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg,
Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall Islands,
Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco,
Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand,
Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay,
the People's Republic of China, Peru, the Philippines, Poland, Portugal, Qatar,
the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe,
Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the
Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St.
Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Syria, Taiwan,
Tajikistan, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan,
Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan,
Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
507951-001
Intel Core T9800 2.93-GHz processor (6-MB L2 cache, 1066-MHz FSB, includes replacement
thermal material)
507952-001
Intel Core T9600 2.80-GHz processor (6-MB L2 cache, 1066-MHz FSB, includes replacement
thermal material)
507953-001
Intel Core T9550 2.66-GHz processor (6-MB L2 cache, 1066-MHz FSB, includes replacement
thermal material)
Continued
3–16
Maintenance and Service Guide
Illustrated parts catalog
Spare part number
Description
507960-001
Intel Core P8700 2.53-GHz processor (3-MB L2 cache, 1066-MHz FSB, includes replacement
thermal material)
507963-001
Intel Core P8600 2.40-GHz processor (3-MB L2 cache, 1066-MHz FSB, includes replacement
thermal material)
507965-001
Intel Core P7450 2.13-GHz processor (3-MB L2 cache, 1066-MHz FSB, includes replacement
thermal material)
507967-001
Intel Core P7350 2.00-GHz processor (3-MB L2 cache, 1066-MHz FSB, includes replacement
thermal material)
513592-001
Intel Core T6400 2.06-GHz processor (6-MB L2 cache, 1066-MHz FSB, includes replacement
thermal material)
513593-001
Intel Core T6600 2.20-GHz processor (6-MB L2 cache, 1066-MHz FSB, includes replacement
thermal material)
513599-001
Intel Core T4200 2.00-GHz processor (1-MB L2 cache, 800-MHz FSB, includes replacement
thermal material)
518436-001
Atheros 9285G 802.11a/b/g/n WLAN module for use in Canada, the Cayman Islands, Guam,
Puerto Rico, the United States, and the U.S. Virgin Islands
530643-001
Keyboard without backlight with molded finish for use only with computer models with black trim in
the United States (includes keyboard cable)
530643-031
Keyboard without backlight with molded finish for use only with computer models with black trim in
the United Kingdom (includes keyboard cable)
530643-041
Keyboard without backlight with molded finish for use only with computer models with black trim in
Germany (includes keyboard cable)
530643-051
Keyboard without backlight with molded finish for use only with computer models with black trim in
France (includes keyboard cable)
530643-061
Keyboard without backlight with molded finish for use only with computer models with black trim in
Italy (includes keyboard cable)
530643-071
Keyboard without backlight with molded finish for use only with computer models with black trim in
Spain (includes keyboard cable)
530643-141
Keyboard without backlight with molded finish for use only with computer models with black trim in
Turkey (includes keyboard cable)
530643-161
Keyboard without backlight with molded finish for use only with computer models with black trim in
Latin America (includes keyboard cable)
530643-201
Keyboard without backlight with molded finish for use only with computer models with black trim in
Brazil (includes keyboard cable)
530643-221
Keyboard without backlight with molded finish for use only with computer models with black trim in
the Czech Republic (includes keyboard cable)
530643-251
Keyboard without backlight with molded finish for use only with computer models with black trim in
Russia (includes keyboard cable)
530643-A41
Keyboard without backlight with molded finish for use only with computer models with black trim in
Belgium (includes keyboard cable)
530643-AB1
Keyboard without backlight with molded finish for use only with computer models with black trim in
Taiwan (includes keyboard cable)
530643-B31
Keyboard without backlight with molded finish for use only with computer models with black trim in
Europe, the Middle East, and Africa (includes keyboard cable)
530643-BB1
Keyboard without backlight with molded finish for use only with computer models with black trim in
Israel (includes keyboard cable)
Continued
Maintenance and Service Guide
3–17
Illustrated parts catalog
Spare part number
Description
530643-BG1
Keyboard without backlight with molded finish for use only with computer models with black trim in
Switzerland (includes keyboard cable)
530643-DJ1
Keyboard without backlight with molded finish for use only with computer models with black trim in
Greece (includes keyboard cable)
530644-121
Keyboard without backlight with painted finish for use only with computer models with black trim in
French Canada (includes keyboard cable)
530644-171
Keyboard without backlight with painted finish for use only with computer models with black trim in
Saudi Arabia (includes keyboard cable)
530644-281
Keyboard without backlight with painted finish for use only with computer models with black trim in
Thailand (includes keyboard cable)
530644-291
Keyboard without backlight with painted finish for use only with computer models with black trim in
Japan (includes keyboard cable)
530644-AD1
Keyboard without backlight with painted finish for use only with computer models with black trim in
South Korea (includes keyboard cable)
530644-DH1
Keyboard without backlight with painted finish for use only with computer models with black trim in
Denmark, Finland, and Norway (includes keyboard cable)
530645-001
Keyboard without backlight with painted finish for use only with computer models with white trim in
the United States (includes keyboard cable)
530645-031
Keyboard without backlight with painted finish for use only with computer models with white trim in
the United Kingdom (includes keyboard cable)
530645-041
Keyboard without backlight with painted finish for use only with computer models with white trim in
Germany (includes keyboard cable)
530645-051
Keyboard without backlight with painted finish for use only with computer models with white trim in
France (includes keyboard cable)
530645-061
Keyboard without backlight with painted finish for use only with computer models with white trim in
Italy (includes keyboard cable)
530645-071
Keyboard without backlight with painted finish for use only with computer models with white trim in
Spain (includes keyboard cable)
530645-121
Keyboard without backlight with painted finish for use only with computer models with white trim in
French Canada (includes keyboard cable)
530645-131
Keyboard without backlight with painted finish for use only with computer models with white trim in
Portugal (includes keyboard cable)
530645-141
Keyboard without backlight with painted finish for use only with computer models with white trim in
Turkey (includes keyboard cable)
530645-161
Keyboard without backlight with painted finish for use only with computer models with white trim in
Latin America (includes keyboard cable)
530645-171
Keyboard without backlight with painted finish for use only with computer models with white trim in
Saudi Arabia (includes keyboard cable)
530645-201
Keyboard without backlight with painted finish for use only with computer models with white trim in
Brazil (includes keyboard cable)
530645-221
Keyboard without backlight with painted finish for use only with computer models with white trim in
the Czech Republic (includes keyboard cable)
530645-251
Keyboard without backlight with painted finish for use only with computer models with white trim in
Russia (includes keyboard cable)
530645-281
Keyboard without backlight with painted finish for use only with computer models with white trim in
Thailand (includes keyboard cable)
Continued
3–18
Maintenance and Service Guide
Illustrated parts catalog
Spare part number
Description
530645-291
Keyboard without backlight with painted finish for use only with computer models with white trim in
Japan (includes keyboard cable)
530645-A41
Keyboard without backlight with painted finish for use only with computer models with white trim in
Belgium (includes keyboard cable)
530645-AB1
Keyboard without backlight with painted finish for use only with computer models with white trim in
Taiwan (includes keyboard cable)
530645-AD1
Keyboard without backlight with painted finish for use only with computer models with white trim in
South Korea (includes keyboard cable)
530645-B31
Keyboard without backlight with painted finish for use only with computer models with white trim in
Europe, the Middle East, and Africa (includes keyboard cable)
530645-BB1
Keyboard without backlight with painted finish for use only with computer models with white trim in
Israel (includes keyboard cable)
530645-BG1
Keyboard without backlight with painted finish for use only with computer models with white trim in
Switzerland (includes keyboard cable)
530645-DH1
Keyboard without backlight with painted finish for use only with computer models with white trim in
Denmark, Finland, and Norway (includes keyboard cable)
530645-DJ1
Keyboard without backlight with painted finish for use only with computer models with white trim in
India (includes keyboard cable)
530646-001
Keyboard with backlight and painted finish for use only with computer models with black trim in
the United States (includes keyboard cable and backlight cable)
530646-031
Keyboard with backlight and painted finish for use only with computer models with black trim in
the United Kingdom (includes keyboard cable and backlight cable)
530646-041
Keyboard with backlight and painted finish for use only with computer models with black trim in
Germany (includes keyboard cable and backlight cable)
530646-051
Keyboard with backlight and painted finish for use only with computer models with black trim in
France (includes keyboard cable and backlight cable)
530646-061
Keyboard with backlight and painted finish for use only with computer models with black trim in Italy
(includes keyboard cable and backlight cable)
530646-071
Keyboard with backlight and painted finish for use only with computer models with black trim in Spain
(includes keyboard cable and backlight cable)
530646-121
Keyboard with backlight and painted finish for use only with computer models with black trim in
French Canada (includes keyboard cable and backlight cable)
530646-131
Keyboard with backlight and painted finish for use only with computer models with black trim in
Portugal (includes keyboard cable and backlight cable)
530646-141
Keyboard with backlight and painted finish for use only with computer models with black trim in
Turkey (includes keyboard cable and backlight cable)
530646-161
Keyboard with backlight and painted finish for use only with computer models with black trim in
Latin America (includes keyboard cable and backlight cable)
530646-171
Keyboard with backlight and painted finish for use only with computer models with black trim in
Saudi Arabia (includes keyboard cable and backlight cable)
530646-221
Keyboard with backlight and painted finish for use only with computer models with black trim in
the Czech Republic (includes keyboard cable and backlight cable)
530646-251
Keyboard with backlight and painted finish for use only with computer models with black trim in
Russia (includes keyboard cable and backlight cable)
530646-A41
Keyboard with backlight and painted finish for use only with computer models with black trim in
Belgium (includes keyboard cable and backlight cable)
Continued
Maintenance and Service Guide
3–19
Illustrated parts catalog
Spare part number
Description
530646-B31
Keyboard with backlight and painted finish for use only with computer models with black trim in
Europe, the Middle East, and Africa (includes keyboard cable and backlight cable)
530646-BB1
Keyboard with backlight and painted finish for use only with computer models with black trim in Israel
(includes keyboard cable and backlight cable)
530646-BG1
Keyboard with backlight and painted finish for use only with computer models with black trim in
Switzerland (includes keyboard cable and backlight cable)
530646-DH1
Keyboard with backlight and painted finish for use only with computer models with black trim in
Denmark, Finland, and Norway (includes keyboard cable and backlight cable)
530646-DJ1
Keyboard with backlight and painted finish for use only with computer models with black trim in
Greece (includes keyboard cable and backlight cable)
530780-001
System board for use only with computer models equipped with graphics subsystems with discrete
memory (includes replacement thermal material)
530781-001
System board for use only with computer models equipped with graphics subsystems with UMA
memory (includes replacement thermal material)
530782-001
Display hinges for use only with computer models equipped with a 13.3-inch display assembly
530783-001
Display hinges for use only with computer models equipped with a 13.4-inch display assembly
530785-001
13.4-inch AntiGlare display assembly for use only with computer models with black trim (includes
2 LAN antenna transceivers and cables, 2 WWAN antenna transceivers and cables, webcam,
microphone, nameplate, and logo)
530787-001
13.4-inch AntiGlare display assembly for use only with computer models with white trim (includes
2 WLAN antenna transceivers and cables, 2 WWAN antenna transceivers and cables, webcam,
microphone, nameplate, and logo)
530788-001
1-GB memory module (800-MHz, DDR2)
530790-001
2-GB memory module (800-MHz, DDR2)
530792-001
4-GB memory module (800-MHz, DDR2)
530794-001
160-GB, 5400-rpm hard drive (includes hard drive connector and hard drive bracket)
530795-001
250-GB, 5400-rpm hard drive (includes hard drive connector and hard drive bracket)
530796-001
320-GB, 5400-rpm hard drive (includes hard drive connector and hard drive bracket)
530797-001
500-GB, 5400-rpm hard drive (includes hard drive connector and hard drive bracket)
530798-001
DVD±RW and CD-RW SuperMulti Double-Layer Drive with LightScribe
530799-001
Blu-ray ROM DVD±R/RW SuperMulti DL Drive
530800-001
Blu-ray ROM DVD±R/RW SuperMulti DL Drive with LightScribe
530801-001
6-cell, 47-Wh battery
530802-001
6-cell, 55-Wh battery
530803-001
9-cell, 83-Wh battery
531778-001
13.4-inch BrightView display panel
531779-001
13.3-inch BrightView display panel
531780-001
Display hinges for use only with AntiGlare display assemblies
531781-001
Wireless antenna set for use only with BrightView display assemblies
531782-001
Display panel cable (includes webcam/microphone module cable)
531785-001
Webcam/microphone module
Continued
3–20
Maintenance and Service Guide
Illustrated parts catalog
Spare part number
Description
531786-001
13.3-inch BrightView display assembly for use only computer models with black trim (includes
2 WLAN antenna transceivers and cables, 2 WWAN antenna transceivers and cables, webcam,
microphone, nameplate, and logo)
531787-001
13.4-inch BrightView display assembly for use only computer models with black trim (includes
2 WLAN antenna transceivers and cables, 2 WWAN antenna transceivers and cables, webcam,
microphone, nameplate, and logo)
531788-001
Display bezel for use only with computer models equipped with a BrightView 13.3-inch
display assembly
531790-001
Display enclosure for use only with computer models equipped with a BrightView display assembly
with black trim
531791-001
Display enclosure for use only with computer models equipped with an AntiGlare display assembly
with black trim
531792-001
13.3-inch BrightView display assembly for use only with computer models with white trim (includes 2
WLAN antenna transceivers and cables, 2 WWAN antenna transceivers and cables, webcam,
microphone, nameplate, and logo)
531793-001
13.4-inch BrightView display assembly for use only with computer models with white trim (includes 2
WLAN antenna transceivers and cables, 2 WWAN antenna transceivers and cables, webcam,
microphone, nameplate, and logo)
531794-001
Display bezel for use only with computer models equipped with a 13.4-inch BrightView
display assembly
531796-001
Display enclosure for use only with computer models equipped with a BrightView display assembly
and white trim
531797-001
Display enclosure for use only with computer models equipped with an AntiGlare display assembly
and white trim
531807-001
Base enclosure (includes six rubber feet)
531808-001
Plastics Kit
531809-001
✎ See “Plastics Kit” on page 12 for more Plastics Kit spare part information.
USB board (includes USB board cable)
531810-001
Power connector and cable
531811-001
Bluetooth module cable
531812-001
Audio board (includes audio board cable)
531813-001
Fan/heat sink assembly for use only with computer models equipped with graphics subsystems with
UMA memory (includes replacement thermal material)
531814-001
Fan/heat sink assembly for use only with computer models equipped with graphics subsystems with
Discrete memory (includes replacement thermal material)
531815-001
Screw Kit
531816-001
Speaker assembly (includes speaker assembly cable)
531817-001
Switch cover for use only with computer models with black trim (includes power button board
and cable)
531818-001
Switch cover for use only with computer models with white trim (includes power button board
and cable)
531820-001
Top cover with fingerprint reader board with molded finish for use only with computer models with
white trim (includes TouchPad on/off board and cable, TouchPad button board and cable, TouchPad
board and cable, and fingerprint reader board cable)
531821-001
Top cover without fingerprint reader board with molded finish for use only with computer models with
white trim (includes fingerprint reader board cable)
Continued
Maintenance and Service Guide
3–21
Illustrated parts catalog
Spare part number
Description
531822-001
Top cover with fingerprint reader board molded finish for use only with computer models with
white trim (includes TouchPad on/off board and cable, TouchPad button board and cable, TouchPad
board and cable, and fingerprint reader board cable)
531823-001
Top cover without fingerprint reader board molded finish for use only with computer models with
white trim (includes fingerprint reader board cable)
531826-001
LED board (includes LED board cable)
531827-001
SIM slot board (includes SIM slot board cable)
531828-001
Fingerprint reader board (includes fingerprint reader board cable)
531829-001
RTC battery (includes RTC battery cable and double-sided tape)
532324-001
Intel Celeron T1600 1.66-GHz processor (1-MB L2 cache, 667-MHz FSB, includes replacement
thermal material)
534989-001
Rubber Feet Kit (includes six rubber feet)
534990-001
Hard Drive Hardware Kit (includes hard drive connector, hard drive bracket, and screws)
537205-001
Wireless antenna set for use only with computer models equipped with an AntiGlare
display assembly
538657-001
13.4-inch AntiGlare display assembly for use only with computer models with blue trim (includes 2
WLAN antenna transceivers and cables, 2 WWAN antenna transceivers and cables, webcam,
microphone, nameplate, and logo)
538658-001
13.3-inch BrightView display assembly for use only with computer models with blue trim (includes 2
WLAN antenna transceivers and cables, 2 WWAN antenna transceivers and cables, webcam,
microphone, nameplate, and logo)
538659-001
13.4-inch BrightView display assembly for use only with computer models with blue trim (includes 2
WLAN antenna transceivers and cables, 2 WWAN antenna transceivers and cables, webcam,
microphone, nameplate, and logo)
538660-001
Display enclosure for use only with computer models equipped with a BrightView display assembly
and blue trim
538661-001
Display enclosure for use only with computer models equipped with a AntiGlare display assembly
and blue trim
538662-001
Switch cover for use only with computer models with black trim (includes power button board
and cable)
538663-001
Top cover without fingerprint reader board with molded finish for use only with computer models with
blue trim (includes TouchPad on/off board and cable, TouchPad button board and cable, and
TouchPad board and cable)
538665-001
Keyboard without backlight with molded finish for use only with computer models with blue trim in the
United States (includes keyboard cable)
538665-121
Keyboard without backlight with molded finish for use only with computer models with blue trim in
French Canada (includes keyboard cable)
538665-281
Keyboard without backlight with molded finish for use only with computer models with blue trim in
Thailand (includes keyboard cable)
538665-291
Keyboard without backlight with molded finish for use only with computer models with blue trim in
Japan (includes keyboard cable)
538665-AB1
Keyboard without backlight with molded finish for use only with computer models with blue trim in
Taiwan (includes keyboard cable)
538665-AD1
Keyboard without backlight with molded finish for use only with computer models with blue trim in
South Korea (includes keyboard cable)
539044-001
Keyboard without backlight with molded finish for use only with computer models with white trim in
the United States (includes keyboard cable)
Continued
3–22
Maintenance and Service Guide
Illustrated parts catalog
Spare part number
Description
539044-031
Keyboard without backlight with molded finish for use only with computer models with white trim in
the United Kingdom (includes keyboard cable)
539044-041
Keyboard without backlight with molded finish for use only with computer models with white trim in
Germany (includes keyboard cable)
539044-051
Keyboard without backlight with molded finish for use only with computer models with white trim in
France (includes keyboard cable)
539044-061
Keyboard without backlight with molded finish for use only with computer models with white trim in
Italy (includes keyboard cable)
539044-071
Keyboard without backlight with molded finish for use only with computer models with white trim in
Spain (includes keyboard cable)
539044-131
Keyboard without backlight with molded finish for use only with computer models with white trim in
Portugal (includes keyboard cable)
539044-141
Keyboard without backlight with molded finish for use only with computer models with white trim in
Turkey (includes keyboard cable)
539044-161
Keyboard without backlight with molded finish for use only with computer models with white trim in
Latin America (includes keyboard cable)
539044-201
Keyboard without backlight with molded finish for use only with computer models with white trim in
Brazil (includes keyboard cable)
539044-221
Keyboard without backlight with molded finish for use only with computer models with white trim in
the Czech Republic (includes keyboard cable)
539044-251
Keyboard without backlight with molded finish for use only with computer models with white trim in
Russia (includes keyboard cable)
539044-A41
Keyboard without backlight with molded finish for use only with computer models with white trim in
Belgium (includes keyboard cable)
539044-AB1
Keyboard without backlight with molded finish for use only with computer models with white trim in
Taiwan (includes keyboard cable)
539044-B31
Keyboard without backlight with molded finish for use only with computer models with white trim in
Europe, the Middle East, and Africa (includes keyboard cable)
539044-BB1
Keyboard without backlight with molded finish for use only with computer models with white trim in
Israel (includes keyboard cable)
539044-BG1
Keyboard without backlight with molded finish for use only with computer models with white trim in
Switzerland (includes keyboard cable)
539044-DJ1
Keyboard without backlight with molded finish for use only with computer models with white trim in
Greece (includes keyboard cable)
570036-001
Intel Core P8700 2.53-GHz processor (3-MB L2 cache, 1066-MHz FSB, includes replacement
thermal material)
570434-001
Intel Core T9900 3.06-GHz processor (6-MB L2 cache, 1066-MHz FSB, includes replacement
thermal material)
572084-001
250-GB, 7200-rpm hard drive (includes hard drive connector and hard drive bracket)
572085-001
320-GB, 7200-rpm hard drive (includes hard drive connector and hard drive bracket)
572926-001
Intel Pentium T3000 1.80-GHz processor (1-MB L2 cache, 800-MHz FSB, includes replacement
thermal material)
572928-001
Intel Core T6500 2.10-GHz processor (6-MB L2 cache, 1066-MHz FSB, includes replacement
thermal material)
Continued
Maintenance and Service Guide
3–23
Illustrated parts catalog
3–24
Spare part number
Description
572929-001
Intel Pentium T4300 2.10-GHz processor (1-MB L2 cache, 800-MHz FSB, includes replacement
thermal material)
573076-001
Intel Core P7550 2.26-GHz processor (3-MB L2 cache, 1066-MHz FSB, includes replacement
thermal material)
573738-001
5000-GB, 7200-rpm hard drive (includes hard drive connector and hard drive bracket)
Maintenance and Service Guide
4
Removal and replacement procedures
Preliminary replacement requirements
Tools required
You will need the following tools to complete the removal and replacement procedures:
■
Flat-bladed screwdriver
■
Magnetic screwdriver
■
Phillips P0 and P1 screwdrivers
Service considerations
The following sections include some of the considerations that you must keep in mind during disassembly and
assembly procedures.
you remove each subassembly from the computer, place the subassembly (and all accompanying screws) away
✎ As
from the work area to prevent damage.
Plastic parts
Using excessive force during disassembly and reassembly can damage plastic parts. Use care when
Ä CAUTION:
handling the plastic parts. Apply pressure only at the points designated in the maintenance instructions.
Cables and connectors
When servicing the computer, be sure that cables are placed in their proper locations during the
Ä CAUTION:
reassembly process. Improper cable placement can damage the computer.
Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat or seat the
cables during removal and insertion. Handle cables by the connector whenever possible. In all cases, avoid
bending, twisting, or tearing cables. Be sure that cables are routed in such a way that they cannot be caught or
snagged by parts being removed or replaced. Handle flex cables with extreme care; these cables tear easily.
Maintenance and Service Guide
4–1
Removal and replacement procedures
Drive handling
Drives are fragile components that must be handled with care. To prevent damage to the computer,
Ä CAUTION:
damage to a drive, or loss of information, observe these precautions:
■
■
■
■
■
■
■
■
■
Before removing or inserting a hard drive, shut down the computer. If you are unsure whether the computer is off
or in Hibernation, turn the computer on, and then shut it down through the operating system.
Before handling a drive, be sure that you are discharged of static electricity. While handling a drive, avoid
touching the connector.
Before removing a diskette drive or optical drive, be sure that a diskette or disc is not in the drive and be sure
that the optical drive tray is closed.
Handle drives on surfaces covered with at least one inch of shock-proof foam.
Avoid dropping drives from any height onto any surface.
After removing a hard drive, an optical drive, or a diskette drive, place it in a static-proof bag.
Avoid exposing a hard drive to products that have magnetic fields, such as monitors or speakers.
Avoid exposing a drive to temperature extremes or liquids.
If a drive must be mailed, place the drive in a bubble pack mailer or other suitable form of protective packaging
and label the package “FRAGILE.”
Grounding guidelines
Electrostatic discharge damage
Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure determine the
degree of sensitivity. Networks built into many integrated circuits provide some protection, but in many cases, ESD
contains enough power to alter device parameters or melt silicon junctions.
A discharge of static electricity from a finger or other conductor can destroy static-sensitive devices or
microcircuitry. Even if the spark is neither felt nor heard, damage may have occurred.
An electronic device exposed to ESD may not be affected at all and may work perfectly throughout a normal cycle.
Or the device may function normally for a while, and then degrade in the internal layers, reducing its life
expectancy.
CAUTION: To prevent damage to the computer when you are removing or installing internal components, observe
Ä these
precautions:
■
■
■
■
■
4–2
Keep components in their electrostatic-safe containers until you are ready to install them.
Use nonmagnetic tools.
Before touching an electronic component, discharge static electricity by using the guidelines described in
this section.
Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible.
If you remove a component, place it in an electrostatic-safe container.
Maintenance and Service Guide
Removal and replacement procedures
The following table shows how humidity affects the electrostatic voltage levels generated by different activities.
Ä CAUTION: A product can be degraded by as little as 700 V.
Typical electrostatic voltage levels
Relative humidity
Event
10%
40%
55%
Walking across carpet
35,000 V
15,000 V
7,500 V
Walking across vinyl floor
12,000 V
5,000 V
3,000 V
Motions of bench worker
6,000 V
800 V
400 V
Removing DIPS from plastic tube
2,000 V
700 V
400 V
Removing DIPS from vinyl tray
11,500 V
4,000 V
2,000 V
Removing DIPS from Styrofoam
14,500 V
5,000 V
3,500 V
Removing bubble pack from PCB
26,500 V
20,000 V
7,000 V
Packing PCBs in foam-lined box
21,000 V
11,000 V
5,000 V
Packaging and transporting guidelines
Follow these grounding guidelines when packaging and transporting equipment:
■
To avoid hand contact, transport products in static-safe tubes, bags, or boxes.
■
Protect ESD-sensitive parts and assemblies with conductive or approved containers or packaging.
■
Keep ESD-sensitive parts in their containers until the parts arrive at static-free workstations.
■
Place items on a grounded surface before removing items from their containers.
■
Always be properly grounded when touching a component or assembly.
■
Store reusable ESD-sensitive parts from assemblies in protective packaging or nonconductive foam.
■
Use transporters and conveyors made of antistatic belts and roller bushings. Be sure that mechanized equipment
used for moving materials is wired to ground and that proper materials are selected to avoid static charging.
When grounding is not possible, use an ionizer to dissipate electric charges.
Workstation guidelines
Follow these grounding workstation guidelines:
■
Cover the workstation with approved static-shielding material.
■
Use a wrist strap connected to a properly grounded work surface and use properly grounded tools and
equipment.
■
Use conductive field service tools, such as cutters, screwdrivers, and vacuums.
■
When fixtures must directly contact dissipative surfaces, use fixtures made only of static-safe materials.
■
Keep the work area free of nonconductive materials, such as ordinary plastic assembly aids and Styrofoam.
■
Handle ESD-sensitive components, parts, and assemblies by the case or PCM laminate. Handle these items
only at static-free workstations.
■
Avoid contact with pins, leads, or circuitry.
■
Turn off power and input signals before inserting or removing connectors or test equipment.
Maintenance and Service Guide
4–3
Removal and replacement procedures
Equipment guidelines
Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation.
■
When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps with a
minimum of one megohm ±10% resistance in the ground cords. To provide proper ground, wear a strap snugly
against the skin at all times. On grounded mats with banana-plug connectors, use alligator clips to connect a
wrist strap.
■
When standing, use foot straps and a grounded floor mat. Foot straps (heel, toe, or boot straps) can be used at
standing workstations and are compatible with most types of shoes or boots. On conductive floors or
dissipative floor mats, use foot straps on both feet with a minimum of one megohm resistance between the
operator and ground. To be effective, the conductive strips must be worn in contact with the skin.
The following grounding equipment is recommended to prevent electrostatic damage:
■
Antistatic tape
■
Antistatic smocks, aprons, and sleeve protectors
■
Conductive bins and other assembly or soldering aids
■
Nonconductive foam
■
Conductive tabletop workstations with ground cords of one megohm resistance
■
Static-dissipative tables or floor mats with hard ties to the ground
■
Field service kits
■
Static awareness labels
■
Material-handling packages
■
Nonconductive plastic bags, tubes, or boxes
■
Metal tote boxes
■
Electrostatic voltage levels and protective materials
The following table lists the shielding protection provided by antistatic bags and floor mats.
4–4
Material
Use
Voltage protection level
Antistatic plastic
Bags
1,500 V
Carbon-loaded plastic
Floor mats
7,500 V
Metallized laminate
Floor mats
5,000 V
Maintenance and Service Guide
Removal and replacement procedures
Component replacement procedures
This chapter provides removal and replacement procedures.
There are as many as 67 screws, in 10 different sizes, that must be removed, replaced, or loosened when servicing
the computer. Make special note of each screw size and location during removal and replacement.
Serial number
Report the computer serial number to HP when requesting information or ordering spare parts. The serial number is
located on the bottom of the computer.
Item
Component
Description
1
Product name
This is the product name affixed to the front of your
computer.
2
Serial number (s/n)
This is an alphanumeric identifier that is unique to each
product.
3
Part number/Product number (p/n)
This number provides specific information about the
product’s hardware components. The part number helps a
service technician to determine what components and
parts are needed.
4
Model description
This is the alphanumeric identifier you use to locate
documents, drivers, and support for your computer.
5
Warranty period
This number describes the duration (in years) of the
warranty period for this computer.
Maintenance and Service Guide
4–5
Removal and replacement procedures
Computer feet
The computer feet are adhesive-backed rubber pads. The feet are included in the Rubber Kit, spare part number
534989-001. There are 6 rubber feet that attach to the base enclosure in the locations illustrated below.
Battery
Description
Spare part number
9-cell, 83-Wh battery
530803-001
6-cell, 55-Wh battery
530802-001
6-cell, 47-Wh battery
530801-001
Before disassembling the computer, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4–6
Maintenance and Service Guide
Removal and replacement procedures
Remove the battery:
1. Turn the computer upside down on a flat surface, with the battery bay toward you.
2. Slide the battery release latch 1 to release the battery.
3. Lift the front edge of the battery pack 2 until it rests at an angle.
4. Remove the battery 3 from the computer.
Install the battery by inserting it into the battery bay until you hear a click.
Maintenance and Service Guide
4–7
Removal and replacement procedures
Hard drive
✎ The hard drive spare part kit includes a hard drive connector and hard drive bracket.
Description
Spare part number
500-GB, 7200-rpm hard drive
573738-001
500-GB, 5400-rpm hard drive
530797-001
320-GB, 7200-rpm hard drive
572085-001
320-GB, 5400-rpm hard drive
530796-001
250-GB, 7200-rpm hard drive
572084-001
250-GB, 5400-rpm hard drive
530795-001
160-GB, 5400-rpm hard drive
530794-001
Hard Drive Hardware Kit (includes hard drive connector, hard drive bracket, and screws)
534990-001
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 6).
Remove the hard drive:
1. Position the computer with the front toward you.
2. Loosen the three Phillips PM2.5×6.0 captive screws 1 that secure the hard drive cover to the computer.
3. Lift the left side of the hard drive cover 2 to detach it from the computer.
4. Remove the hard drive cover 3. The hard drive cover is included in the Plastics Kit, spare part number
531808-001.
4–8
Maintenance and Service Guide
Removal and replacement procedures
5. Grasp the Mylar tab 1 on the hard drive and slide the hard drive 2 to the right.
6. Remove the hard drive 3 from the hard drive bay.
7. If it is necessary to replace the hard drive bracket, follow these steps:
a. Remove the two Phillips PM3.0×4.0 screws 1 from each side of the hard drive.
b. Lift the bracket 2 straight up to remove it from the hard drive.
Reverse this procedure to reassemble and install the hard drive.
Maintenance and Service Guide
4–9
Removal and replacement procedures
Memory module
Description
Spare part number
4-GB memory module (800-MHz, DDR2)
530792-001
2-GB memory module (800-MHz, DDR2)
530790-001
1-GB memory module (800-MHz, DDR2
530788-001
Before removing the memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 6).
5. Remove the hard drive cover (see “Hard drive” on page 8).
Remove the memory module:
✎ The top memory module slot is for expansion memory and the bottom slot is for primary memory.
1. Spread the retaining tabs 1 on each side of the memory module to release the memory module. (The edge of
the module opposite the slot rises away from the computer.)
2. Remove the memory module 2 by pulling the module away from the slot at an angle.
modules are designed with a notch 3 to prevent incorrect insertion into the memory module
✎ Memory
slot.
Reverse this procedure to install a memory module.
4–10
Maintenance and Service Guide
Removal and replacement procedures
WLAN module
Ä CAUTION: The WLAN module and the WWAN module are not interchangeable.
Description
Spare part number
Broadcom 4322AGN 802.11a/b/g/n WLAN module for use in Canada,
the Cayman Islands, Guam, Puerto Rico, the United States, and the U.S. Virgin Islands
504664-001
Broadcom 4322AGN 802.11a/b/g/n WLAN module for use in Afghanistan, Albania,
Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia,
Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium,
Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil,
the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon,
Cape Verde, the Central African Republic, Chad, Colombia, Comoros, the Congo, Costa
Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican
Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia,
Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany,
Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau,
Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel,
Italy, the Ivory Coast, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait,
Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania,
Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the
Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco,
Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether
Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman,
Pakistan, Palau, Panama, Papua New Guinea, Paraguay, the People's Republic of China,
Peru, the Philippines, Poland, Portugal, Qatar, the Republic of Moldova, Romania, Russia,
Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia,
the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands,
Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St.
Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Syria, Taiwan,
Tajikistan, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey,
Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United Kingdom,
Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and
Zimbabwe
504664-002
Atheros 9285G 802.11a/b/g/n WLAN module for use in Canada, the Cayman Islands,
Guam, Puerto Rico, the United States, and the U.S. Virgin Islands
518436-001
Intel WiFi Link 5100 802.11a/b/g/n WLAN module for use in all countries and regions
except Pakistan, Russia, and the Ukraine
480985-001
Continued
Maintenance and Service Guide
4–11
Removal and replacement procedures
Description
Spare part number
Broadcom 4312G 802.11a/b/g WLAN module for use in Canada, the Cayman Islands,
Guam, Puerto Rico, the United States, and the U.S. Virgin Islands
504593-001
Broadcom 4312G 802.11a/b/g WLAN module for use in Afghanistan, Albania, Algeria,
Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria,
Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize,
Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil,
the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon,
Cape Verde, the Central African Republic, Chad, Colombia, Comoros, the Congo, Costa
Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican
Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia,
Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany,
Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau,
Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel,
Italy, the Ivory Coast, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait,
Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania,
Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the
Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco,
Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether
Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman,
Pakistan, Palau, Panama, Papua New Guinea, Paraguay, the People's Republic of China,
Peru, the Philippines, Poland, Portugal, Qatar, the Republic of Moldova, Romania, Russia,
Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia,
the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands,
Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St.
Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Syria, Taiwan,
Tajikistan, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey,
Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United Kingdom,
Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and
Zimbabwe
504593-002
Intel WiFi Link 5100 802.11a/b/g WLAN module for use only in Pakistan, Russia, and
the Ukraine
482957-001
Before removing the WLAN module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 6).
4–12
Maintenance and Service Guide
Removal and replacement procedures
Remove the WLAN module:
To prevent an unresponsive system, replace the wireless module only with a wireless module authorized
Ä CAUTION:
for use in the computer by the governmental agency that regulates wireless devices in your country or region. If you
replace the module and then receive a warning message, remove the module to restore computer functionality, and
then contact technical support through Help and Support.
1. Lift the rear edge of the wireless module compartment cover 1 to detach the cover from the computer.
2. Remove the wireless module compartment cover 2. The wireless module compartment cover is included in the
Plastics Kit, spare part number 531808-001.
Maintenance and Service Guide
4–13
Removal and replacement procedures
3. Remove the Phillips PM2.5×3.0 screw 1 that secures the WLAN module bracket to the computer.
4. Remove the WLAN module bracket 2. (The edge of the module opposite the slot rises away from
the computer.)
5. Disconnect the WLAN antenna cables 3 from the terminals on the WLAN module.
black WLAN antenna cable is connected to the WLAN module “Main” terminal. The white WLAN
✎ The
antenna cable is connected to the WLAN module “Aux” terminal.
6. Remove the WLAN module 4 by pulling the module away from the slot at an angle.
modules are designed with a notch 5 to prevent incorrect insertion of the WLAN module into
✎ WLAN
the WLAN module slot.
Reverse this procedure to install the WLAN module.
4–14
Maintenance and Service Guide
Removal and replacement procedures
WWAN module
Ä CAUTION: The WLAN module and the WWAN module are not interchangeable.
Description
Spare part number
HSPA EVDO WWAN module
483377-002
Before removing the WWAN module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 6).
5. Remove the wireless module compartment cover and WLAN module (see “WLAN module” on page 11).
Remove the WWAN module:
To prevent an unresponsive system, replace the wireless module only with a wireless module authorized
Ä CAUTION:
for use in the computer by the governmental agency that regulates wireless devices in your country or region. If you
replace the module and then receive a warning message, remove the module to restore computer functionality, and
then contact technical support through Help and Support.
1. Disconnect the WWAN antenna cables 1 from the terminals on the WWAN module.
red WWAN antenna cable is connected to the WWAN module “Main” terminal. The blue WWAN
✎ The
antenna cable is connected to the WWAN module “Aux” terminal.
2. Remove the two Phillips PM2.0×3.0 screws 2 that secure the WWAN module to the computer. (The edge of
the module opposite the slot rises away from the computer.)
3. Remove the WWAN module 3 by pulling the module away from the slot at an angle.
modules are designed with a notch 4 to prevent incorrect insertion of the WWAN module into
✎ WWAN
the WWAN module slot.
Reverse this procedure to install the WWAN module.
Maintenance and Service Guide
4–15
Removal and replacement procedures
SIM slot board
Description
Spare part number
SIM slot board (includes cable)
531827-001
Before removing the SIM slot board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 6).
5. Remove the wireless module compartment cover (see “WLAN module” on page 11).
Remove the SIM slot board:
1. Slide the SIM cover 1 to the right to release the cover.
2. Lift the left side of the cover 2 and swing it up and to the right.
3. Remove the SIM 3.
✎ Store the SIM in a safe place. It will be necessary to reinstall the SIM when reassembling the computer.
4–16
Maintenance and Service Guide
Removal and replacement procedures
4. Remove the Phillips PM2.5×3.0 screw 1 that secures the SIM slot board to the computer.
5. Lift the SIM slot board 2 as far as the SIM slot board cable allows.
6. Disconnect the SIM slot board cable 3 from the system board.
Reverse this procedure to install the SIM slot board.
Maintenance and Service Guide
4–17
Removal and replacement procedures
RTC battery
Description
Spare part number
RTC battery (includes cable and double-sided tape)
531829-001
Before removing the RTC battery, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 6).
5. Remove the wireless module compartment cover (see “WLAN module” on page 11).
6. Remove the SIM slot board (see “SIM slot board” on page 16).
Remove the RTC battery:
1. Detach the RTC battery 1 from the base enclosure and release the RTC battery as far as the RTC battery cable
allows. (The RTC battery is attached to the base enclosure with double-sided tape.)
2. Disconnect the RTC battery cable 2 from the system board.
3. Remove the RTC battery.
Reverse this procedure to install the RTC battery.
4–18
Maintenance and Service Guide
Removal and replacement procedures
Optical drive
✎ The optical drive spare part kit includes an optical drive bezel and bracket.
Description
Spare part number
Blu-ray ROM DVD±R/RW SuperMulti DL Drive with LightScribe
530800-001
Blu-ray ROM DVD±R/RW SuperMulti DL Drive
530799-001
DVD±RW and CD-RW SuperMulti Double-Layer Drive with LightScribe
530798-001
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 6).
Remove the optical drive:
1. Position the computer with the right side toward you.
2. Remove the Phillips PM2.0×8.0 screw 1 that secures the optical drive to the computer.
3. Insert a thin tool, such as a paper clip 2, into the release access. (The optical drive disc tray is partially ejected
from the optical drive.)
4. Use the disc tray frame to slide the optical drive 3 out of the computer.
Maintenance and Service Guide
4–19
Removal and replacement procedures
5. If it is necessary to replace the optical drive bracket, follow these steps:
a. Position the optical drive with the rear toward you.
b. Remove the two Phillips PM2.0×3.0 screws 1 that secure the optical drive bracket to the optical drive.
c. Remove the optical drive bracket 2.
Reverse this procedure to reassemble and install an optical drive.
4–20
Maintenance and Service Guide
Removal and replacement procedures
Keyboard
For use in country or region:
Spare part number
For use in country or region:
Spare part number
Keyboard with backlight (includes keyboard cable and backlight cable; available only in black with painted finish):
■ For use in Belgium
530646-A41
■ For use in Latin America
530646-161
■ For use in the Czech Republic
530646-221
■ For use in Portugal
530646-131
■ For use in Denmark, Finland,
and Norway
530646-DH1
■ For use in Russia
530646-251
■ For use in Europe, the
Middle East, and Africa
530646-B31
■ For use in Saudi Arabia
530646-171
■ For use in France
530646-051
■ For use in Spain
530646-071
■ For use in French Canada
530646-121
■ For use in Switzerland
530646-BG1
■ For use in Germany
530646-041
■ For use in Turkey
530646-141
■ For use in Greece
530646-DJ1
■ For use in the United Kingdom
530646-031
■ For use in Israel
530646-BB1
■ For use in the United States
530646-001
■ For use in Italy
530646-061
Keyboards without backlight in white with molded finish (includes keyboard cable):
■ For use in Belgium
530643-A41
■ For use in Italy
530643-
■ For use in Brazil
530643-201
■ For use in Latin America
530643-161
■ For use in the Czech Republic
530643-221
■ For use in Russia
530643-251
■ For use in Europe, the
Middle East, and Africa
530643-B31
■ For use in Spain
530643-071
■ For use in France
530643-051
■ For use in Switzerland
530643-BG1
■ For use in French Canada
530643-121
■ For use in Taiwan
530643-AB1
■ For use in Germany
530643-041
■ For use in Turkey
530643-141
■ For use in Greece
530643-DJ1
■ For use in the United Kingdom
530643-031
■ For use in Israel
530643-BB1
■ For use in the United States
530643-001
■ For use in Italy
530643-061
Keyboards without backlight in white with painted finish:
■ For use in Denmark, Finland,
and Norway
530644-DH1
■ For use in Saudi Arabia
530644-171
■ For use in French Canada
530644-121
■ For use in South Korea
530644-AD1
■ For use in Japan
530644-291
■ For use in Thailand
530644-281
Continued
Maintenance and Service Guide
4–21
Removal and replacement procedures
For use in country or region:
Spare part number
For use in country or region:
Spare part number
Keyboards without backlight in blue color and molded finish:
■ For use in French Canada
538665-121
■ For use in Taiwan
538665-AB1
■ For use in Japan
538665-291
■ For use in Thailand
538665-281
■ For use in South Korea
538665-AD1
■ For use in the United States
538665-001
Keyboards without backlight with molded finish for use only with computer models with white trim:
■ For use in Belgium
539044-A41
■ For use in Latin America
539044-161
■ For use in Brazil
539044-201
■ For use in Portugal
539044-131
■ For use in the Czech Republic
539044-221
■ For use in Russia
539044-251
■ For use in Europe, the
Middle East, and Africa
539044-DH1
■ For use in Spain
539044-071
■ For use in France
539044-051
■ For use in Switzerland
539044-BG1
■ For use in Germany
539044-041
■ For use in Taiwan
539044-AB1
■ For use in Greece
539044-DJ1
■ For use in Turkey
539044-141
■ For use in Israel
539044-BB1
■ For use in the United Kingdom
539044-031
■ For use in Italy
539044-061
■ For use in the United States
539044-001
Keyboards without backlight with painted finish for use only with computer models with white trim:
4–22
■ For use in Belgium
530645-A41
■ For use in Latin America
530645-161
■ For use in Brazil
530645-201
■ For use in Portugal
530645-131
■ For use in the Czech Republic
530645-221
■ For use in Russia
530645-251
■ For use in Denmark, Finland, and
Norway
530645-DH1
■ For use in Saudi Arabia
530645-171
■ For use in Europe, the Middle
East, and Africa
530645-B31
■ For use in South Korea
530645-AD1
■ For use in France
530645-051
■ For use in Spain
530645-071
■ For use in French Canada
530645-121
■ For use in Switzerland
530645-BG1
■ For use in Germany
530645-041
■ For use in Taiwan
530645-AB1
■ For use in Greece
530645-DJ1
■ For use in Thailand
530645-281
■ For use in Israel
530645-BB1
■ For use in Turkey
530645-141
■ For use in Italy
530645-061
■ For use in the United Kingdom
530645-031
■ For use in Japan
530645-291
■ For use in the United States
530645-001
Maintenance and Service Guide
Removal and replacement procedures
Before removing the keyboard, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 6).
5. Remove the hard drive cover (see “Hard drive” on page 8).
Remove the keyboard:
1. Remove the three Phillips PM2.0×8.0 screws that secure the keyboard to the computer.
Maintenance and Service Guide
4–23
Removal and replacement procedures
2. Turn the computer display-side up with the front toward you.
3. Open the computer as far as possible.
4. Lift the rear edge of the keyboard 1 until it rests at an angle.
5. Slide the keyboard 2 toward the display until the tabs on the front edge of the keyboard are clear of the
openings in the top cover.
6. Swing the rear edge of the keyboard 3 up and forward until it rests upside down on the top cover.
7. Release the zero insertion force (ZIF) connector 1 to which the keyboard cable is attached, and disconnect
the keyboard cable 2 from the system board.
8. Remove the keyboard.
Reverse this procedure to install the keyboard.
4–24
Maintenance and Service Guide
Removal and replacement procedures
Switch cover
✎ The switch cover spare part kit includes the power button board and cable.
Description
Spare part number
Switch cover for use only with computer models with black trim
531817-001
Switch cover for use only with computer models with blue black trim
538662-001
Switch cover for use only with computer models with white trim
531818-001
Before removing the switch cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 6).
5. Remove the hard drive cover (see “Hard drive” on page 8).
6. Remove the keyboard (see “Keyboard” on page 21).
Remove the switch cover:
1. Remove the two Phillips PM2.0×8.0 screws 1 and the five Phillips PM2.0×3.0 screws 2 that secure the switch
cover to the computer.
Maintenance and Service Guide
4–25
Removal and replacement procedures
2. Turn the computer display-side up with the front toward you.
3. Open the computer as far as possible.
4. Disconnect the LED board cable 1 from the low insertion force (LIF) connector on the system board.
5. Lift the rear edge of the switch cover 2 and swing it up and forward until it detaches from the computer.
6. Remove the switch cover.
Reverse this procedure to install the switch cover.
4–26
Maintenance and Service Guide
Removal and replacement procedures
Speaker assembly
Description
Spare part number
Speaker assembly
531816-001
Before removing the speaker assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 6).
5. Remove the following components:
a. Hard drive cover (see “Hard drive” on page 8)
b. Keyboard (see “Keyboard” on page 21)
c. Switch cover (see “Switch cover” on page 25).
Remove the speaker assembly:
1. Disconnect the speaker assembly cable 1 from the system board.
2. Release the speaker cables from the clips 2 and routing channels built into the top cover.
3. Remove the three Phillips PM2.0×3.0 screws 3 that secure the speaker assembly to the top cover.
4. Remove the speaker assembly 4.
Reverse this procedure to install the speaker assembly.
Maintenance and Service Guide
4–27
Removal and replacement procedures
Display assembly
display assembly spare part kit includes 2 WLAN antenna transceivers and cables, 2 WWAN antenna
✎ The
transceivers and cables, webcam, microphone, nameplate, and logo.
Description
Spare part number
AntiGlare display assemblies:
■ 13.4-inch display assembly for use only with computer models with black trim
530785-001
■ 13.4-inch display assembly for use only with computer models with blue trim
538657-001
■ 13.4-inch display assembly for use only with computer models with white trim
530787-001
BrightView display assemblies:
■ 13.4-inch display assembly for use only with computer models with black trim
531787-001
■ 13.4-inch display assembly for use only with computer models with blue trim
538659-001
■ 13.4-inch display assembly for use only with computer models with white trim
531793-001
■ 13.3-inch display assembly for use only with computer models with black trim
531786-001
■ 13.3-inch display assembly for use only with computer models with blue trim
538658-001
■ 13.3-inch display assembly for use only with computer models with white trim
531792-001
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 6).
5. Disconnect the wireless antenna cables from the WLAN module (see “WLAN module” on page 11) and the
WWAN module (see “WWAN module” on page 15).
6. Remove the following components:
a. Hard drive cover (see “Hard drive” on page 8)
b. Keyboard (see “Keyboard” on page 21)
c. Switch cover (see “Switch cover” on page 25)
d. Speaker assembly (see “Speaker assembly” on page 27).
4–28
Maintenance and Service Guide
Removal and replacement procedures
Remove the display assembly:
1. Remove the WLAN antenna cables 1 from the opening in the base enclosure.
2. Disconnect the display panel cable 2 from the system board.
Support the display assembly when removing the following screws. Failure to support the display
Ä CAUTION:
assembly can result in damage to the display assembly and other computer components.
3. Remove the two Phillips PM2.5×6.0 screws 1 that secure the display assembly to the computer.
4. Lift the display assembly 2 straight up and remove it.
Maintenance and Service Guide
4–29
Removal and replacement procedures
5 through 21 provide display assembly internal component removal information for computer models
✎ Steps
equipped with AntiGlare display assemblies. See steps 22 through 38 for display assembly internal component
removal information for computer models equipped with BrightView display assemblies.
5. If it is necessary to replace the display enclosure or any of the display assembly internal components, remove
the Mylar screw covers 1 and the two Phillips PM2.5×6.0 screws 2 on the display bezel lower edge.
6. Turn the display assembly upside down with the bottom edge toward you.
7. Detach the bottom edge of the display enclosure 1 and lift it up as far as the display LED cable allows.
8. Disconnect the display LED cable 2.
9. Remove the display enclosure 3. Display enclosures are available using the following spare part numbers:
❏ 531791-001—For use only with computer models with black trim
❏ 538661-001—For use only with computer models with blue trim
❏ 531797-001—For use only with computer models with white trim
4–30
Maintenance and Service Guide
Removal and replacement procedures
10. If it is necessary to replace the webcam/microphone module, release the two metal tabs 1 built into the display
panel shielding.
11. Lift the webcam/microphone module 2 as far from the display bezel as the webcam/microphone cable allows.
12. Disconnect the webcam/microphone module 3 from the webcam/microphone module.
13. Remove the webcam/microphone module. The webcam/microphone module is available using spare part
number 531785-001.
14. If it is necessary to replace the display panel cable, fold back the flap built into the display panel shielding 1.
15. Lift the top edge of the display panel cable bracket 2 and swing it toward you and down.
16. Disconnect the display panel cable from the display panel 3.
Maintenance and Service Guide
4–31
Removal and replacement procedures
17. Release the tabs 1 built into the display panel shielding.
18. Remove the display panel cable 2. The display panel cable is available using spare part number 531782-001.
19. If it is necessary to replace the display hinges, remove the hinge covers 1 from the hinges.
20. Remove the six Phillips PM2.5×4.0 screws 2 and the four Phillips PM2.0×3.0 screws 3 that secure the hinges
to the display panel.
21. Remove the display hinges 4. The display hinges are available using spare part number 531780-001.
4–32
Maintenance and Service Guide
Removal and replacement procedures
22 through 38 provide display assembly internal component removal information for computer models
✎ Steps
equipped with BrightView display assemblies. See steps 5 through 21 for display assembly internal component
removal information for computer models equipped with AntiGlare display assemblies.
22. If it is necessary to replace the display bezel or any of the display assembly internal components, remove the
Mylar screw covers 1 and the two Phillips PM2.5×6.0 screws 2 on the display bezel lower edge.
23. Flex the inside edges of the top edge 1, the left and right sides 2, and the bottom edge of the display bezel
3 until the bezel disengages from the display enclosure.
24. Remove the display bezel 4. The display bezel is available using the following spare part numbers:
❏ 531794-001—for use only with computer models equipped with a 13.4-inch display assembly
❏ 531788-001—for use only with computer models equipped with a 13.3-inch display assembly.
Maintenance and Service Guide
4–33
Removal and replacement procedures
25. If it is necessary to replace the webcam/microphone module, lift the webcam/microphone module 1 as far
from the display enclosure as the webcam/microphone module allows.
26. Disconnect the webcam/microphone module cable 2 from the webcam/microphone module.
27. Remove the webcam/microphone module. The webcam/microphone module is available using spare part
number 531785-001.
28. If it is necessary to replace the display panel, remove the six Phillips PM2.5×4.0 screws 1 that secure the
display panel to the display enclosure.
29. Remove the display panel 2. The display panel is available using the following spare part numbers:
❏ 531779-001—for use only with computer models equipped with a 13.4-inch display assembly
❏ 531778-001—for use only with computer models equipped with a 13.3-inch display assembly.
4–34
Maintenance and Service Guide
Removal and replacement procedures
30. If it is necessary to replace the display hinges, remove the six Phillips PM2.0×30 screws 1 that secure the
hinges to the display panel.
31. Remove the display hinges 2. The display hinges are available using the following spare part numbers:
❏ 530783-001—for use only with computer models equipped with a 13.4-inch display assembly
❏ 530782-001—for use only with computer models equipped with a 13.3-inch display assembly
32. If it is necessary to replace the display panel cable, turn the display panel upside down with the bottom edge
toward you.
33. Detach the support strip 1 that secures the display panel cable to the display panel.
34. Disconnect the display panel cable 2 from the connector on the back of the display panel.
35. Remove the display panel cable 3. The display panel cable is available using spare part number 531782-001.
Maintenance and Service Guide
4–35
Removal and replacement procedures
36. If it is necessary to replace the wireless antenna transceivers and cables, release the tabs 1 built into the display
enclosure shielding.
37. Release the wireless antenna transceivers 2 from the display enclosure. The transceivers are attached to the
enclosure with double-sided tape.
38. Remove the wireless antenna transceivers and cables 3. The wireless antenna transceivers and cables are
available using spare part number 531781-001.
Reverse this procedure to reassemble and install the display assembly.
4–36
Maintenance and Service Guide
Removal and replacement procedures
Top cover
top cover spare part kit includes the TouchPad on/off board and cable, TouchPad button board and cable, and
✎ The
TouchPad board and cable.
Description
Spare part number
Top covers with fingerprint reader board (include fingerprint reader board cable):
For use only with computer models with black trim
531820-001
For use only with computer models with white trim
531822-001
Top covers without fingerprint reader board:
For use only with computer models with black trim
531821-001
For use only with computer models with blue trim
538663-001
For use only with computer models with white trim
531823-001
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 6).
5. Remove the following components:
a. Hard drive (see “Hard drive” on page 8)
b. Optical drive (see “Optical drive” on page 19)
c. Keyboard (see “Keyboard” on page 21)
d. Switch cover (see “Switch cover” on page 25)
e. Speaker assembly (see “Speaker assembly” on page 27)
f. Display assembly (see “Display assembly” on page 28).
Maintenance and Service Guide
4–37
Removal and replacement procedures
Remove the top cover:
1. Turn the computer upside down with the front toward you.
2. Remove the following screws that secure the top cover to the base enclosure:
1 Four Phillips PM2.0×8.0 screws on the front edge of the base enclosure
2 Two Phillips PM2.0×4.0 screws in the hard drive bay
3 Two Phillips PM2.0×3.0 screws on the front edge of the battery bay
4–38
Maintenance and Service Guide
Removal and replacement procedures
3. Disconnect the power connector cable 1 from the system board.
4. Disconnect the USB board cable 2 from the system board.
5. Remove the power connector cable and USB board cable from the clips 3 built into the top cover.
6. Disconnect the caps lock LED cable 4 from the LIF connector on the system board.
7. Detach the caps lock LED cable 5 from the top cover. The caps lock LED cable is attached to the top cover
with double-sided tape.
8. Disconnect the TouchPad cable 1 from the LIF connector on the system board.
9. Disconnect the TouchPad on/off button board cable 2 from the LIF connector on the system board.
10. Release the ZIF connector 3 to which the fingerprint reader board cable is attached and disconnect the
fingerprint reader board cable 4 from the system board.
11. Disconnect the fan cable 5 from the system board.
Maintenance and Service Guide
4–39
Removal and replacement procedures
12. Remove the three Phillips PM2.0×6.0 screws 1 and the two Phillips PM2.0×3.0 screws 2 that secure the top
cover to the base enclosure.
13. Lift the rear edge of the top cover 1 until it rests at an angle.
14. Route the power connector cable and the USB board cable 2 through the openings in the top cover.
15. Remove the top cover 3 by lifting it straight up.
Reverse this procedure to install the top cover.
4–40
Maintenance and Service Guide
Removal and replacement procedures
Fingerprint reader board
Description
Spare part number
Fingerprint reader board (includes cable)
531828-001
Before removing the fingerprint reader board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 6).
5. Remove the following components:
a. Hard drive (see “Hard drive” on page 8)
b. Optical drive (see “Optical drive” on page 19)
c. Keyboard (see “Keyboard” on page 21)
d. Switch cover (see “Switch cover” on page 25)
e. Speaker assembly (see “Speaker assembly” on page 27)
f. Display assembly (see “Display assembly” on page 28).
g. Top cover (see “Top cover” on page 37).
Remove the fingerprint reader board:
1. Turn the top cover upside down with the front edge toward you.
2. Remove the two Phillips PM2.0×3.0 screws 1 that secure the fingerprint reader board and bracket to the
top cover.
3. Remove the fingerprint reader board bracket 2.
4. Detach the fingerprint reader board cable 3 from the top cover. The fingerprint reader board cable is attached
to the top cover with double-sided tape.
5. Remove the fingerprint reader board 4.
Reverse this procedure to install the fingerprint reader board.
Maintenance and Service Guide
4–41
Removal and replacement procedures
LED board
Description
Spare part number
LED board (includes cable)
531826-001
Before removing the LED board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 6).
5. Remove the following components:
a. Hard drive (see “Hard drive” on page 8)
b. Optical drive (see “Optical drive” on page 19)
c. Keyboard (see “Keyboard” on page 21)
d. Switch cover (see “Switch cover” on page 25)
e. Speaker assembly (see “Speaker assembly” on page 27)
f. Display assembly (see “Display assembly” on page 28).
g. Top cover (see “Top cover” on page 37).
Remove the LED board and cable:
1. Disconnect the LED board cable 1 from the system board.
2. Remove the LED board cable from the clips 2 built into the base enclosure.
3. Remove the Phillips PM2.0×3.0 screw 3 that secures the LED board to the base enclosure.
4. Remove the LED board and cable 4.
Reverse this procedure to install the LED board.
4–42
Maintenance and Service Guide
Removal and replacement procedures
Bluetooth module
Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth module cable is
✎ The
available using spare part number 531811-001.
Description
Spare part number
Bluetooth module
483113-001
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 6).
5. Remove the following components:
a. Hard drive (see “Hard drive” on page 8)
b. Optical drive (see “Optical drive” on page 19)
c. Keyboard (see “Keyboard” on page 21)
d. Switch cover (see “Switch cover” on page 25)
e. Speaker assembly (see “Speaker assembly” on page 27)
f. Display assembly (see “Display assembly” on page 28).
g. Top cover (see “Top cover” on page 37).
Remove the Bluetooth module and cable:
1. Disconnect the Bluetooth module cable 1 from the system board.
2. Remove the Bluetooth module cable from the clips 2 built into the base enclosure.
3. Remove Bluetooth module and cable 3.
Reverse this procedure to install the Bluetooth module.
Maintenance and Service Guide
4–43
Removal and replacement procedures
Audio board
Description
Spare part number
Audio board (includes cable)
531812-001
Before removing the audio board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 6).
5. Remove the following components:
a. Hard drive (see “Hard drive” on page 8)
b. Optical drive (see “Optical drive” on page 19)
c. Keyboard (see “Keyboard” on page 21)
d. Switch cover (see “Switch cover” on page 25)
e. Speaker assembly (see “Speaker assembly” on page 27)
f. Display assembly (see “Display assembly” on page 28).
g. Top cover (see “Top cover” on page 37).
Remove the audio board and cable:
1. Disconnect the audio board cable 1 from the system board.
2. Detach the audio board cable 2 from the system board. The audio board cable is attached to the system board
with double-sided tape.
3. Remove the Phillips PM2.0×3.0 screw 3 that secures the audio board to the system board.
4. Lift the rear edge of the audio board 4 so that the audio connectors slide out of the openings in the base
enclosure and remove the audio board and cable.
Reverse this procedure to install the audio board.
4–44
Maintenance and Service Guide
Removal and replacement procedures
USB board
Description
Spare part number
USB board (includes cable)
531809-001
Before removing the USB board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 6).
5. Remove the following components:
a. Hard drive (see “Hard drive” on page 8)
b. Optical drive (see “Optical drive” on page 19)
c. Keyboard (see “Keyboard” on page 21)
d. Switch cover (see “Switch cover” on page 25)
e. Speaker assembly (see “Speaker assembly” on page 27)
f. Display assembly (see “Display assembly” on page 28).
g. Top cover (see “Top cover” on page 37).
Remove the USB board and cable:
1. Remove the Phillips PM2.0×3.0 screw 1 that secures the USB board to the system board.
2. Remove the USB board and cable 2.
Reverse this procedure to install the USB board.
Maintenance and Service Guide
4–45
Removal and replacement procedures
Power connector and cable
Description
Spare part number
Power connector and cable
531810-001
Before removing the power connector and cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 6).
5. Remove the following components:
a. Hard drive (see “Hard drive” on page 8)
b. Optical drive (see “Optical drive” on page 19)
c. Keyboard (see “Keyboard” on page 21)
d. Switch cover (see “Switch cover” on page 25)
e. Speaker assembly (see “Speaker assembly” on page 27)
f. Display assembly (see “Display assembly” on page 28).
g. Top cover (see “Top cover” on page 37).
Remove the power connector and cable:
1. Remove the power connector 1 from the clip 2 built into the base enclosure.
2. Remove the power connector and cable.
Reverse this procedure to install the power connector and cable.
4–46
Maintenance and Service Guide
Removal and replacement procedures
System board
✎ The system board spare part kit includes replacement thermal material.
Description
Spare part number
For use only with computer models equipped with graphics subsystems with
discrete memory
530780-001
For use only with computer models equipped with graphics subsystems with
UMA memory
530781-001
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 6).
5. Remove the following components:
a. Hard drive (see “Hard drive” on page 8)
b. Memory module (see “Memory module” on page 10)
c. WLAN module (see “WLAN module” on page 11)
d. WWAN module (see “WWAN module” on page 15)
e. SIM slot board (see “SIM slot board” on page 16)
f. RTC battery (see “RTC battery” on page 18)
g. Optical drive (see “Optical drive” on page 19)
h. Keyboard (see “Keyboard” on page 21)
i. Switch cover (see “Switch cover” on page 25)
j. Speaker assembly (see “Speaker assembly” on page 27)
k. Display assembly (see “Display assembly” on page 28).
l. Top cover (see “Top cover” on page 37).
When replacing the system board, be sure that the following additional components are removed from the defective
system board and installed on the replacement system board:
■
Heat sink (see “Fan/heat sink assembly” on page 50)
■
Processor (see “Processor” on page 55)
Maintenance and Service Guide
4–47
Removal and replacement procedures
Remove the system board:
1. Disconnect the following cables from the system board:
1 LED board cable
2 Bluetooth module cable
3 Audio board cable
2. Remove the two Phillips PM2.0×4.0 screws that secure the system board to the base enclosure.
4–48
Maintenance and Service Guide
Removal and replacement procedures
3. Use the optical drive connector 1 to lift the left side of the system board 2 until it rests at an angle.
4. Remove the system board from the base enclosure by pulling it away at an angle 3.
Reverse this procedure to install the system board.
Maintenance and Service Guide
4–49
Removal and replacement procedures
Fan/heat sink assembly
✎ The fan/heat sink assembly spare part kit includes replacement thermal material.
Description
Spare part number
For use only with computer models equipped with graphics subsystems with
discrete memory
531814-001
For use only with computer models equipped with graphics subsystems with
UMA memory
531813-001
ventilate the computer, allow at least a 7.6-cm (3-inch) clearance on the left side of the computer.
✎ ToTheproperly
computer uses an electric fan for ventilation. The fan is controlled by a temperature sensor and is designed
to turn on automatically when high temperature conditions exist. These conditions are affected by high external
temperatures, system power consumption, power management/battery conservation configurations, battery fast
charging, and software requirements. Exhaust air is displaced through the ventilation grill located on the left side
of the computer.
Before removing the fan/heat sink assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 6).
5. Remove the following components:
a. Hard drive (see “Hard drive” on page 8)
b. Memory module (see “Memory module” on page 10)
c. WLAN module (see “WLAN module” on page 11)
d. WWAN module (see “WWAN module” on page 15)
e. SIM slot board (see “SIM slot board” on page 16)
f. RTC battery (see “RTC battery” on page 18)
g. Optical drive (see “Optical drive” on page 19)
h. Keyboard (see “Keyboard” on page 21)
i. Switch cover (see “Switch cover” on page 25)
j. Speaker assembly (see “Speaker assembly” on page 27)
k. Display assembly (see “Display assembly” on page 28).
l. Top cover (see “Top cover” on page 37).
m. System board (see “System board” on page 47).
4–50
Maintenance and Service Guide
Removal and replacement procedures
Remove the fan/heat sink assembly:
1. Turn the system board upside down with the front toward you.
2 and 3 apply to computer models equipped with graphics subsystems with discrete memory. See steps 4
✎ Steps
and 5 for instructions on removing the fan/heat sink assembly on computer models equipped with graphics
subsystems with UMA memory.
2. Loosen the four captive Phillips PM2.0×7.0 screws 1 that secure the fan/heat sink assembly to the
system board.
3. Remove the fan/heat sink assembly 2.
to the adhesive quality of the thermal material located between the fan/heat sink assembly and system board
✎ Due
components, it may be necessary to move the fan/heat sink assembly from side to side to detach the assembly.
Maintenance and Service Guide
4–51
Removal and replacement procedures
thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink assembly and the system
✎ The
board each time the fan/heat sink assembly is removed:
■
Thermal paste is used on the processor 1 and the heat sink section 2 that services it.
Thermal pads are used on the Northbridge chip 3 and the heat sink section 4 that services it.
■ Thermal pads are used on the graphics subsystem memory module 5 and the heat sink section 6 that
services it.
■ Thermal pads are used on the other system board components 7 and heat sink sections 8 that service them.
■
Replacement thermal material is included with all system board, fan/heat sink assembly, and processor spare
part kits.
4–52
Maintenance and Service Guide
Removal and replacement procedures
4 and 5 apply to computer models equipped with graphics subsystems with UMA memory. See steps 2
✎ Steps
and 3 for instructions on removing the fan/heat sink assembly on computer models equipped with graphics
subsystems with discrete memory.
4. Loosen the four captive Phillips PM2.0×7.0 screws 1 that secure the fan/heat sink assembly to the
system board.
5. Remove the fan/heat sink assembly 2.
to the adhesive quality of the thermal material located between the fan/heat sink assembly and system board
✎ Due
components, it may be necessary to move the fan/heat sink assembly from side to side to detach the assembly.
Maintenance and Service Guide
4–53
Removal and replacement procedures
thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink assembly and the system
✎ The
board each time the fan/heat sink assembly is removed:
■
Thermal paste is used on the processor 1 and the heat sink section 2 that services it.
Thermal pads are used on the Northbridge chip 3 and the heat sink section 4 that services it.
■ Thermal pads are used on the other system board components 5 and sections of the heat sink 6 that
service them.
■
Replacement thermal material is included with all system board, fan/heat sink assembly, and processor spare
part kits.
Reverse this procedure to install the fan/heat sink assembly.
4–54
Maintenance and Service Guide
Removal and replacement procedures
Processor
✎ The processor spare part kit includes replacement thermal material.
Description
Spare part number
Intel Core 2 processors:
■ T9900 2.93-GHz processor (6-MB L2 cache, 1066-MHz FSB)
570434-001
■ T9800 2.93-GHz processor (6-MB L2 cache, 1066-MHz FSB)
507951-001
■ T9600 2.80-GHz processor (6-MB L2 cache, 1066-MHz FSB)
507952-001
■ T9550 2.66-GHz processor (6-MB L2 cache, 1066-MHz FSB)
507953-001
■ P8800 2.66-GHz processor (3-MB L2 cache, 1066-MHz FSB)
570036-001
■ P8700 2.53-GHz processor (3-MB L2 cache, 1066-MHz FSB)
507960-001
■ P8600 2.40-GHz processor (3-MB L2 cache, 1066-MHz FSB)
507963-001
■ P7550 2.26-GHz processor (3-MB L2 cache, 1066-MHz FSB)
573076-001
■ T6600 2.20-GHz processor (3-MB L2 cache, 1066-MHz FSB)
513593-001
■ P7450 2.13-GHz processor (3-MB L2 cache, 1066-MHz FSB)
507965-001
■ T6500 2.10-GHz processor (3-MB L2 cache, 1066-MHz FSB)
572928-001
■ T6400 2.06-GHz processor (6-MB L2 cache, 1066-MHz FSB)
513592-001
■ P7350 2.00-GHz processor (3-MB L2 cache, 1066-MHz FSB)
507967-001
Intel Pentium processors:
■ T4300 2.10-GHz processor (1-MB L2 cache, 800-MHz FSB)
572929-001
■ T4200 2.00-GHz processor (1-MB L2 cache, 800-MHz FSB)
513599-001
■ T3000 1.80-GHz processor (1-MB L2 cache, 800-MHz FSB)
572926-001
Intel Celeron T1600 1.66-GHz processor (1-MB L2 cache, 667-MHz FSB)
532324-001
Before removing the processor, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 6).
5. Remove the following components:
a. Hard drive (see “Hard drive” on page 8)
b. Memory module (see “Memory module” on page 10)
c. WLAN module (see “WLAN module” on page 11)
d. WWAN module (see “WWAN module” on page 15)
e. SIM slot board (see “SIM slot board” on page 16)
f. RTC battery (see “RTC battery” on page 18)
g. Optical drive (see “Optical drive” on page 19)
Maintenance and Service Guide
4–55
Removal and replacement procedures
h. Keyboard (see “Keyboard” on page 21)
i. Switch cover(see “Switch cover” on page 25)
j. Speaker assembly (see “Speaker assembly” on page 27)
k. Display assembly (see “Display assembly” on page 28).
l. Top cover (see “Top cover” on page 37).
m. System board (see “System board” on page 47).
n. Fan/heat sink assembly (see “Fan/heat sink assembly” on page 50).
Remove the processor:
1. Use a flat-bladed screwdriver to turn the processor locking screw 1 one-half turn counterclockwise until you
hear a click.
2. Lift the processor 2 straight up and remove it.
you install the processor, the gold triangle 3 on the processor must be aligned with the triangle 4
✎ When
embossed on the processor socket.
Reverse this procedure to install the processor.
4–56
Maintenance and Service Guide
5
Setup Utility
Starting the Setup Utility
The Setup Utility is a ROM-based information and customization utility that can be used even when your Windows
operating system is not working.
✎ The fingerprint reader (select models only) cannot be used to access the Setup Utility.
The utility reports information about the computer and provides settings for startup, security, and other preferences.
To start the Setup Utility:
» Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup
Menu” message is displayed in the lower-left corner of the screen, press f10.
– or –
1. Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup
Menu” message is displayed in the lower-left corner of the screen, press esc.
2. When the Startup Menu is displayed, press f10.
Using the Setup Utility
Changing the language of the Setup Utility
The following procedure explains how to change the language of the Setup Utility. If the Setup Utility is not
already running, begin at step 1. If the Setup Utility is already running, begin at step 2.
1. Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup
Menu” message is displayed in the lower-left corner of the screen, press f10.
– or –
Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup
Menu” message is displayed in the lower-left corner of the screen, press esc. When the Startup Menu is
displayed, press f10.
2. Use the arrow keys to select System Configuration > Language, and then press enter.
3. Use the arrow keys to select a language, and then press enter.
4. When a confirmation prompt with your language selected is displayed, press enter.
5. To save your change and exit the Setup Utility, use the arrow keys to select Exit > Exit Saving Changes, and
then press enter.
Your change goes into effect immediately.
Maintenance and Service Guide
5–1
Setup Utility
Navigating and selecting in the Setup Utility
Because the Setup Utility is not Windows based, it does not support the TouchPad. Navigation and selection are
by keystroke.
■
■
■
■
■
To choose a menu or a menu item, use the arrow keys.
To choose an item in a list or to toggle a field, for example an Enable/Disable field, use either the arrow keys or
f5 or f6.
To select an item, press enter.
To close a text box or return to the menu display, press esc.
To display additional navigation and selection information while the Setup Utility is open, press f1.
Displaying system information
The following procedure explains how to display system information in the Setup Utility. If the Setup Utility is not
open, begin at step 1. If the Setup Utility is open, begin at step 2.
1. Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup
Menu” message is displayed in the lower-left corner of the screen, press f10.
– or –
Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup
Menu” message is displayed in the lower-left corner of the screen, press esc. When the Startup Menu is
displayed, press f10.
2. Select the Main menu. System information such as the system time and date, and identification information
about the computer is displayed.
3. To exit the Setup Utility without changing any settings, use the arrow keys to select Exit > Exit Discarding
Changes, and then press enter.
Restoring default settings in the Setup Utility
The following procedure explains how to restore the Setup Utility default settings. If the Setup Utility is not already
running, begin at step 1. If the Setup Utility is already running, begin at step 2.
1. Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup
Menu” message is displayed in the lower-left corner of the screen, press f10.
– or –
Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup
Menu” message is displayed in the lower-left corner of the screen, press esc. When the Startup Menu is
displayed, press f10.
2. Use the arrow keys to select Exit > Load Setup Defaults, and then press enter.
3. When the Setup Confirmation is displayed, press enter.
4. To save your change and exit the Setup Utility, use the arrow keys to select Exit > Exit Saving Changes, and
then press enter.
The Setup Utility default settings go into effect when the computer restarts.
✎ Your password, security, and language settings are not changed when you restore the factory default settings.
5–2
Maintenance and Service Guide
Setup Utility
Exiting the Setup Utility
You can exit the Setup Utility with or without saving changes.
■
To exit the Setup Utility and save your changes from the current session:
If the Setup Utility menus are not visible, press esc to return to the menu display. Then use the arrow keys to
select Exit > Exit Saving Changes, and then press enter.
■ To exit the Setup Utility without saving your changes from the current session:
If the Setup Utility menus are not visible, press esc to return to the menu display. Then use the arrow keys to
select Exit > Exit Discarding Changes, and then press enter.
After either choice, the computer restarts in Windows.
Setup Utility menus
The menu tables in this section provide an overview of Setup Utility options.
✎ Some of the Setup Utility menu items listed in this chapter may not be supported by your computer.
Main menu
Select
To Do This
System information
■ View and change the system time and date.
■ View identification information about the computer.
■ View specification information about the processor, memory size,
system BIOS, and keyboard controller version (select models only).
Security menu
Select
To Do This
Administrator password
Enter, change, or delete an administrator password.
Power-On Password
Enter, change, or delete a power-on password.
Maintenance and Service Guide
5–3
Setup Utility
System Configuration menu
Select
To Do This
Language Support
Change the Setup Utility language.
Button Sound (select models only)
Enable/disable the capacitative button tapping sound.
Virtualization Technology
Enable/disable the processor Virtualization Technology.
Processor C6 State (select models only)
Enable/disable the processor C6 sleep state.
LAN Power Saving (select models only)
Enable/disable LAN Power Saving. When enabled, saves power when the
computer is in DC mode.
Card Reader/1394 Power Saving (select
models only)
Enable/disable Card Reader/1394 Power Saving.
Fan Always On
Enabled/disable Fan Always On. When enabled, the computer fan will
always be on.
Boot Options
Set the following boot options:
■ f10 and f12 Delay (seconds)—Set the delay for the f10 and f12 functions of
the Setup Utility in intervals of 5 seconds each (0, 5, 10, 15, 20).
■ CD-ROM boot—Enable/disable boot from CD-ROM.
■ Floppy boot—Enable/disable boot from diskette.
■ Internal Network Adapter boot—Enable/disable boot from Internal
Network Adapter.
■ Boot Order—Set the boot order for:
❐ Hard drive
❐ Internal CD/DVD ROM drive
❐ USB Diskette on Key/USB hard disk
❐ USB CD/DVD ROM drive
❐ USB Floppy
❐ Network adapter
Diagnostics menu
Select
To Do This
Hard Disk Self Test
Run a comprehensive self-test on the hard drive.
models with two hard drives, this menu option is called the
✎ On
Primary Hard Disk Self Test.
5–4
Secondary Hard Disk Self Test
(select models only)
Run a comprehensive self-test on a secondary hard drive.
Memory Test
Run a diagnostic test on the system memory.
Maintenance and Service Guide
6
Specifications
Computer specifications
Metric
U.S.
Length
22.2 cm
8.74 in
Width
32.8 cm
12.9 in
Height (front to rear)
3.2 to 3.5 cm
1.25 to 1.39 in
Weight
2.2 kg
4.93 lbs
Dimensions
Input power
Operating voltage
19.0 V dc @ 4.74 A - 65 W
Operating current
4.74 A
Temperature
Operating (not writing to optical disc)
0°C to 35°C
32°F to 95°F
Operating (writing to optical disc)
5°C to 35°C
41°F to 95°F
Nonoperating
-20°C to 60°C
-4°F to 140°F
Relative humidity
Operating
10% to 90%
Nonoperating
5% to 95%
Maximum altitude (unpressurized)
Operating
-15 m to 3,048 m
-50 ft to 10,000 ft
Nonoperating
-15 m to 12,192 m
-50 ft to 40,000 ft
Applicable product safety standards specify thermal limits for plastic surfaces. The computer operates well within this
✎ range
of temperatures.
Maintenance and Service Guide
6–1
Specifications
13.4-inch display specifications
Metric
U.S.
Height
18.0 cm
7.1 in
Width
28.7 cm
11.3 in
Diagonal
33.9 cm
13.4 in
Number of colors
Up to 16.8 million
Contrast ratio
250:1 (typical)
Brightness
200 nits (typical)
Dimensions
Pixel resolution
6–2
Pitch
0.279 × 0.279 mm
Format
1366 × 768
Configuration
RGB vertical stripe
Backlight
Edge lit
Character display
80 × 25
Total power consumption
4.0 W
Viewing angle
±40° horizontal, +120°/-40° vertical (typical)
Maintenance and Service Guide
Specifications
13.3-inch display specifications
Metric
U.S.
Height
17.8 cm
7.0 in
Width
28.4 cm
11.2 in
Diagonal
33.6 cm
13.3 in
Number of colors
Up to 16.8 million
Contrast ratio
250:1 (typical)
Brightness
200 nits (typical)
Dimensions
Pixel resolution
Pitch
0.279 × 0.279 mm
Format
1366 × 768
Configuration
RGB vertical stripe
Backlight
Edge lit
Character display
80 × 25
Total power consumption
4.0 W
Viewing angle
±40° horizontal, +120°/-40° vertical (typical)
Maintenance and Service Guide
6–3
Specifications
Hard drive specifications
500-GB*
320-GB*
250-GB*
160-GB*
Height
9.5 mm
9.5 mm
9.5 mm
9.5 mm
Width
70 mm
70 mm
70 mm
70 mm
Weight
101 g
101 g
101 g
101 g
Interface type
SATA
SATA
SATA
SATA
Transfer rate
100 MB/sec
100 MB/sec
100 MB/sec
100 MB/sec
Security
ATA security
ATA security
ATA security
ATA security
Single track
1.0 ms
1.5 ms
2.0 ms
2.0 ms
Average
14.0 ms
12.0 ms
12.0 ms
12.0 ms
Maximum
22.0 ms
22.0 ms
22.0 ms
22.0 ms
Logical blocks
976,773,168
625,142,448
488,397,168
312,581,808
Disc rotational speed
7200 and
5400 rpm
7200 and
5400 rpm
7200 and
5400 rpm
5400 rpm
Operating temperature
5°C to 55°C (41°F to 131°F)
Dimensions
Seek times (typical read, including setting)
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive
specifications may differ slightly.
✎ Certain restrictions and exclusions apply. Contact technical support for details.
6–4
Maintenance and Service Guide
Specifications
Blu-ray ROM DVD±R/RW SuperMulti DL Drive specifications
Applicable disc
Read:
Write:
BD-ROM, BD-ROM-DL, BD-R,
BD-R-DL, BD-RE, BD-RE-DL,
DVD-ROM, DVD+R,
DVD+R-DL, DVD+RW, DVD-R,
DVD-R-DL, DVD-RW,
DVD-RAM (Ver.2), CD-DA,
CD-ROM (mode 1 and
mode 2), CD-ROM XA
(mode 2, form 1 and form 2),
Photo CD (single and multiple
sessions), CD Extra, CD-R,
CD-RW, and CD-TEXT
DVD-RAM (Ver.2), DVD+R,
DVD-R, CD-R, and CD-ROM
Access time
BD
DVD
Random
< 230 ms
< 180 ms
Cache buffer
4.5 MB
Data transfer rate
2X BD-RAM
9 MB/sec
8X DVD
2,400 KB/sec
16X CD-R
2,400 KB/sec
16X CD-RW
2,400 KB/sec
Maintenance and Service Guide
6–5
Specifications
DVD±RW and CD-RW SuperMulti Double-Layer Drive specifications
Applicable disc
Read:
Write:
CD-DA, CD+(E)G, CD-MIDI,
CD-TEXT, CDROM,
CD-ROM XA,
MIXED MODE CD, CD-I,
CD-I Bridge (Photo-CD,
Video CD), Multisession CD
(Photo-CD, CD-EXTRA,
Portfolio, CD-R, CD-RW),
CD-R, CD-RW, DVD-ROM
(DVD-5, DVD-9, DVD-10,
DVD-18), DVD-R, DVD-RW,
DVD+R, DVD+RW, DVD-RAM
CD-R and CD-RW DVD+R,
DVD+RW, DVD-R, DVD-RW,
DVD-RAM
Access time
CD
DVD
Random
< 175 ms
< 230 ms
Cache buffer
2.5 MB
Data transfer rate
6–6
24X CD-ROM
3,600 KB/sec
8X DVD
10,800 KB/sec
24X CD-R
3,600 KB/sec
16X CD-RW
2,400 KB/sec
8x DVD+R
10,800 KB/sec
4X DVD+RW
5,400 KB/sec
8X DVD-R
10,800 KB/sec
4X DVD-RW
5,400 KB/sec
2.4X DVD+R(9)
2,700 KB/sec
5X DVD-RAM
6,750 KB/sec
Transfer mode
Multiword DMA mode
Maintenance and Service Guide
Specifications
System DMA specifications
Hardware
DMA System function
DMA0
Not applicable
DMA1*
Not applicable
DMA2*
Not applicable
DMA3
Not applicable
DMA4
Direct memory access controller
DMA5*
Not applicable
DMA6
Not assigned
DMA7
Not assigned
*ExpressCard controller can use DMA 1, 2, or 5.
Maintenance and Service Guide
6–7
Specifications
System memory map specifications
Size
Memory address
System function
640 KB
00000000-0009FFFF
Base memory
128 KB
000A0000-000BFFFF
Video memory
64 KB
000C0000-000CFFFF
Video BIOS
64 KB
000E8000-000FFFFF
System BIOS
00100000- XFFFFFFF
Extended memory (based on
memory installed)
(X+1)0000000-FEDFFFFF
PCI bus
FED00000-FED003FF
High precision event timer
FEE01000-FFFFFFFF
PCI bus
System interrupt specifications
Hardware IRQ
System function
IRQ0
System timer
IRQ1
Standard 101-/102-key or Microsoft natural keyboard
IRQ8
System CMOS/real-time clock
IRQ12
Synaptics PS/2 TouchPad
IRQ13
Numeric data processor
IRQ16
Intel ICH9 Family USB universal host controller 2937
Mobile Intel 4 Series express chipset family
IRQ17
High definition audio controller
Intel ICH9 Family USB universal host controller 2938
Marvell Yukon 88E8072 PCIE-gigabit Ethernet controller
IRQ18
Intel ICH9 Family USB universal host controller 2939
Intel ICH9 Family USB universal host controller 2936
IRQ19
Intel ICH9 Family USB2 enhanced controller 293C
IRQ20
Intel ICH9 Family USB2 enhanced controller 293A
Intel ICH9 Family USB universal host controller 2934
IRQ21
Intel ICH9M-E/M SATA AHCI controller
IRQ22
Intel ICH9 Family USB universal host controller 2935
*Default configuration; audio possible configurations are IRQ5, IRQ7, IRQ9, IRQ10, or none.
Cards may assert IRQ3, IRQ4, IRQ5, IRQ7, IRQ9, IRQ10, IRQ11, or IRQ15. Either the infrared or the serial port
✎ PC
may assert IRQ3 or IRQ4.
✎ For operating systems after Windows 2000, APIC (Advanced programming interrupt controller) is used.
6–8
Maintenance and Service Guide
Specifications
System I/O address specifications
I/O address (hex)
System function (shipping configuration)
000 - 01F
DMA controller
020 - 021
Program interrupt controller
024 - 025
Program interrupt controller
028 - 029
Program interrupt controller
02C - 03D
Program interrupt controller
02E - 02F
Motherboard resources
030 - 031
Program interrupt controller
034 - 035
Program interrupt controller
038 - 039
Program interrupt controller
03C- 03D
Program interrupt controller
040 - 043
System timer
04E-04F
Motherboard resources
050-053
System timer
060
Standard 101-/102-key or Microsoft natural keyboard
061
Motherboard resources
062
Microsoft ACPI-compliant embedded controller
063
Motherboard resources
064
Standard 101-/102-key or Microsoft natural keyboard
065
Motherboard resources
066
Microsoft ACPI-compliant embedded controller
067
Motherboard resources
070
Motherboard resources
071-077
System CMOS/real time clock
080
Motherboard resources
081-091
Direct memory access controller
092
Motherboard resources
093-09F
Direct memory access controller
0A0-0A1
Program interrupt controller
0A4-0A5
Program interrupt controller
0A8-0A9
Program interrupt controller
0AC-0AD
Program interrupt controller
0B0-0B1
Program interrupt controller
0B2-0B3
Motherboard resources
0B4- 0B5
Program interrupt controller
0B8-0B9
Program interrupt controller
0BC- 0BD
Program interrupt controller
Continued
Maintenance and Service Guide
6–9
Specifications
6–10
I/O address (hex)
System function (shipping configuration)
0C0- 0DF
Direct memory access controller
0F0- 0F0
Numeric data processor
0200-027F
Motherboard resources
3B0-3BB
Mobile Intel 4 series express chipset family
3C0-3DF
Mobile Intel 4 series express chipset family
400-47F
Motherboard resources
4D0-4D1
Programmable interrupt controller
500-57F
Motherboard resources
1000-1003
Motherboard resources
1010-101F
Motherboard resources
2000-20FF
Marvell Yukon 88E8072 PCI-E Gigabit Ethernet controller
2000-2FFF
ICH9 family PCI express root port6-294A
3000-4FFF
ICH9 family PCI express root port5-2948
5000-6FFF
ICH9 family PCI express root port3-2944
7000-701F
ICH9M-E/M SATA AHCI controller
7020-703F
ICH9 family USB universal host controller-2936
7040-705F
ICH9 family USB universal host controller-2935
7060-707F
ICH9 family USB universal host controller-2934
7080-709F
ICH9 family USB universal host controller-2939
70A0-70BF
ICH9 family USB universal host controller-2938
70C0-70DF
ICH9 family USB universal host controller-2937
70E0-70E7
ICH9M-E/M SATA AHCI controller
70E8-70EF
ICH9M-E/M SATA AHCI Controller
70F0-70F7
Mobile Intel 4 series express chipset family
70F8-70FB
ICH9M-E/M SATA AHCI controller
70FC-70FF
ICH9M-E/M SATA AHCI controller
EF80-EF9F
Motherboard resources
FE00-FE0F
Motherboard resources
FE80-EF8F
Motherboard resources
FFFF
Motherboard resources
Maintenance and Service Guide
7
Screw listing
This section provides specification and reference information for the screws used in the computer. The screws
listed in this section are available in the Screw Kit, spare part number 496890-001.
Phillips PM2.0×6.0 captive screw
Color
Quantity
Length
Thread
Head diameter
Black
3
6.0 mm
2.0 mm
5.0 mm
Where used: 3 captive screws that secure the hard drive cover to the computer (screws are secured by C-clips)
Maintenance and Service Guide
7–1
Screw listing
Phillips PM3.0×4.0 screw
Color
Quantity
Length
Thread
Head diameter
Silver
4
4.0 mm
3.0 mm
5.0 mm
Where used: 4 screws that secure the hard drive bracket to the hard drive
7–2
Maintenance and Service Guide
Screw listing
Phillips PM2.0×4.0 screw
Color
Quantity
Length
Thread
Head diameter
Black
4
4.0 mm
2.0 mm
4.5 mm
Where used: 2 screws that secure the top cover to the base enclosure in the hard drive bay
Maintenance and Service Guide
7–3
Screw listing
Where used: 2 screws that secure the system board to the base enclosure
7–4
Maintenance and Service Guide
Screw listing
Phillips PM2.5×3.0 screw
Color
Quantity
Length
Thread
Head diameter
Silver
2
3.0 mm
2.5 mm
5.0 mm
Where used: One screw that secures the WLAN module bracket to the computer
Maintenance and Service Guide
7–5
Screw listing
Where used: One screw that secures the SIM slot board to the computer
7–6
Maintenance and Service Guide
Screw listing
Phillips PM2.0×8.0 screw
Color
Quantity
Length
Thread
Head diameter
Black
10
8.0 mm
2.0 mm
5.0 mm
Where used:
1 One screw that secures the optical drive to the computer
2 Three screws that secure the keyboard to the computer
3 Two screws that secure the switch cover to the computer
4 Four screws that secure the top cover to the base enclosure
Maintenance and Service Guide
7–7
Screw listing
Phillips PM2.0×3.0 screw
Color
Quantity
Length
Thread
Head diameter
Black
27
3.0 mm
2.0 mm
4.5 mm
Where used: 2 screws that secure the WWAN module to the computer
7–8
Maintenance and Service Guide
Screw listing
Where used: 2 screws that secure the optical drive bracket to the optical drive
Where used: 5 screws that secure the switch cover to the computer in the battery bay
Maintenance and Service Guide
7–9
Screw listing
Where used: 3 screws that secure the speaker assembly to the top cover
Where used: 4 screws that secure the hinges to the display panel on AntiGlare display panels
7–10
Maintenance and Service Guide
Screw listing
Where used: 2 screws that secure top cover to the base enclosure
Where used: 4 screws that secure the top cover to the base enclosure
Maintenance and Service Guide
7–11
Screw listing
Where used: 2 screws that secure the fingerprint reader board and bracket to the top cover
Where used:
1 One screw that secures the LED board to the base enclosure
2 One screw that secures the audio board to the base enclosure
3 One screw that secures the USB board to the base enclosure
7–12
Maintenance and Service Guide
Screw listing
Phillips PM2.5×6.0 screw
Color
Quantity
Length
Thread
Head diameter
Silver
4
6.0 mm
2.5 mm
5.0 mm
Where used: 2 screws that secure the display assembly to the computer
Maintenance and Service Guide
7–13
Screw listing
Where used: 2 screws that secure the display enclosure to the display assembly on AntiGlare display assemblies
7–14
Maintenance and Service Guide
Screw listing
Phillips PM2.5×4.0 screw
Color
Quantity
Length
Thread
Head diameter
Silver
6
4.0 mm
2.5 mm
5.0 mm
Where used: 6 screws that secure the display hinges to the display assembly on AntiGlare display assemblies
Maintenance and Service Guide
7–15
Screw listing
Phillips PM2.0×6.0 screw
Color
Quantity
Length
Thread
Head diameter
Silver
3
6.0 mm
2.0 mm
4.5 mm
Where used: 3 screws that secure the top cover to the base enclosure
7–16
Maintenance and Service Guide
Screw listing
Phillips PM2.0×7.0 captive screw
Color
Quantity
Length
Thread
Head diameter
Silver
4
7.0 mm
2.0 mm
5.0 mm
Where used: 4 captive screws that secure the fan/heat sink assembly to the system board on computer models
equipped with graphics subsystems with discrete memory
Maintenance and Service Guide
7–17
Screw listing
Where used: 4 captive screws that secure the fan/heat sink assembly to the system board on computer models
equipped with graphics subsystems with UMA memory
7–18
Maintenance and Service Guide
8
Backup and recovery
Overview
Recovery after a system failure is as complete as your most current backup. HP recommends that you create
recovery discs immediately after software setup. As you add new software and data files, you should continue to
back up your system on a regular basis to maintain a reasonably current backup.
Tools provided by the operating system and HP Recovery Manager software are designed to help you with the
following tasks for safeguarding your information and restoring it in case of a system failure:
■
Creating a set of recovery discs (Recovery Manager software feature). Recovery discs are used to start up
(boot) your computer and restore the operating system and software programs to factory settings in case of
system failure or instability.
■
Backing up your information regularly to protect your important system files.
■
Creating system restore points (operating system feature). System restore points allow you to reverse
undesirable changes to your computer by restoring the computer to an earlier state.
■
Recovering a program or driver (Recovery Manager software feature). This feature helps you reinstall a
program or driver without performing a full system recovery.
■
Performing a full system recovery (Recovery Manager software feature). With Recovery Manager, you can
recover your full factory image if you experience system failure or instability. Recovery Manager works from a
dedicated recovery partition (select models only) on the hard drive or from recovery discs you create.
computer includes a solid-state drive (SSD), you may not have a recovery partition. Recovery discs have
✎ Ifbeenyourincluded
for computers that do not have a partition. Use these discs to recover your operating system and
software. To check for the presence of a recovery partition, select Start > Computer. If the partition is present,
an HP Recovery drive is listed in the Hard Disk Drives section of the window.
Creating recovery discs
HP recommends that you create recovery discs to be sure that you can restore your system to its original factory
state if you experience serious system failure or instability. Create these discs after setting up the computer for the
first time.
Handle these discs carefully and keep them in a safe place. The software allows the creation of only one set of
recovery discs.
your computer does not include an internal optical drive, you can use an optional external optical drive
✎ If(purchased
separately) to create recovery discs, or you can purchase recovery discs for your computer from the
HP Web site.
Maintenance and Service Guide
8–1
Backup and recovery
Note the following guidelines before creating recovery discs:
■
You will need high-quality DVD-R, double-layer DVD-R, DVD+R, double-layer DVD+R, BD-R (writable
Blu-ray), or CD-R discs. All these discs are purchased separately. DVDs and BDs have a much higher capacity
than CDs. If you use CDs, up to 20 discs may be required, whereas only a few DVDs or BDs are required.
discs, such as CD-RW, DVD±RW, double-layer DVD±RW, and BD-RE (rewritable Blu-ray) discs,
✎ Read-write
are not compatible with the Recovery Manager software.
■
The computer must be connected to AC power during this process.
■
Only one set of recovery discs can be created per computer.
■
Number each disc before inserting it into the optical drive.
■
If necessary, you can exit the program before you have finished creating the recovery discs. The next time you
open Recovery Manager, you will be prompted to continue the disc creation process.
To create a set of recovery discs:
1. Select Start > All Programs > Recovery Manager > Recovery Manager.
Recovery Manager opens.
2. Click Advanced Options.
are operating the computer on battery power, you will be prompted to connect to AC power before you can
✎ Ifgoyou
to the next step.
3. Click Recovery disc creation, and then click Next.
4. Follow the on-screen instructions.
Backing up your information
When to back up
■
On a regularly scheduled basis
✎ Set reminders to back up your information periodically.
■
Before the computer is repaired or restored
■
Before you add or modify hardware or software
Backup suggestions
8–2
■
Create a set of recovery discs using Recovery Manager.
■
Create system restore points using the Windows System Restore feature, and periodically copy them to disc.
■
Store personal files in the Documents folder and back up this folder periodically.
■
Back up templates stored in their associated programs.
■
Save customized settings in a window, toolbar, or menu bar by taking a screen shot of your settings. The screen
shot can be a time-saver if you have to reset your preferences.
Maintenance and Service Guide
Backup and recovery
To copy the screen and paste it into a word-processing document, follow these steps:
a. Display the screen.
b. Copy the screen:
To copy only the active window, press alt+fn+prt sc.
To copy the entire screen, press fn+prt sc.
c. Open a word-processing document, and then select Edit > Paste.
Using system restore points
When you back up your system, you are creating a system restore point. A system restore point allows you to save
and name a snapshot of your hard drive at a specific point in time. You can then recover back to that point if you
want to reverse subsequent changes made to your system.
to an earlier restore point does not affect data files saved or e-mails created since the last
✎ Recovering
restore point.
You also can create additional restore points to provide increased protection for your system files and settings.
When to create restore points
■
Before you add or extensively modify software or hardware
■
Periodically, whenever the system is performing optimally
✎ If you revert to a restore point and then change your mind, you can reverse the restoration.
Create a system restore point
1. Select Start > Control Panel > System and Maintenance > System.
2. In the left pane, click System Protection.
3. Click the System Protection tab.
4. Under Automatic restore points, select the disk for which you want to create a restore point.
5. Click Create.
The System Protection window opens.
6. Follow the on-screen instructions.
Restore to a previous date and time
To revert to a restore point (created at a previous date and time), when the computer was functioning optimally,
follow these steps:
1. Select Start > Control Panel > System and Maintenance > System.
2. In the left pane, click System protection.
3. Click the System Protection tab.
4. Click the System Restore button, and then click Next.
The System Restore window opens.
5. Follow the on-screen instructions.
Maintenance and Service Guide
8–3
Backup and recovery
Performing a recovery
can recover only files that you have previously backed up. HP recommends that you use HP Recovery
✎ You
Manager to create an entire drive backup as soon as you set up your computer.
Recovery Manager software allows you to repair or restore the system if you experience system failure or
instability. Recovery Manager works from recovery discs or from a dedicated recovery partition (select models
only) on the hard drive. However, if your computer includes a solid-state drive (SSD), you may not have a recovery
partition. If that is the case, recovery discs have been included with your computer. Use these discs to recover your
operating system and software.
has its own built-in repair features, such as System Restore and driver roll-back capabilities. If you
✎ Windows
have not already tried these features, try them before using Recovery Manager.
Manager recovers only software that was preinstalled at the factory. Software not provided with this
✎ Recovery
computer must be downloaded from the manufacturer's Web site or reinstalled from the disc provided by the
manufacturer.
Recovering from the recovery discs
To restore the system from the recovery discs:
1. Back up all personal files.
2. Insert the first recovery disc into the optical drive and restart the computer.
3. Follow the on-screen instructions.
Recovering from the dedicated recovery (select models only)
computer includes an SSD, you may not have a recovery partition. You will not be able to recover using
✎ Ifthisyourprocedure.
Recovery discs have been included for computers that do not have a partition. Use these discs to
recover your operating system and software.
On some models, you can perform a recovery from the partition on the hard drive from either the Start button
or f11. This restores the computer to it's factory condition.
To restore the system from the partition, follow these steps:
1. Access Recovery Manager in either of the following ways:
◆
Select Start > All Programs > Recovery Manager > Recovery Manager.
– or –
◆
Restart the computer and press f11 while the “Press <F11> for recovery” message is displayed on the
screen. Then select Recovery Manager.
Recovery Manager opens.
2. Click Advanced Options.
3. Click System recovery, and then click Next.
4. Follow the on-screen instructions.
8–4
Maintenance and Service Guide
9
Connector pin assignments
Audio-in (microphone)
Pin
Signal
1
Audio signal in
2
Audio signal in
3
Ground
Audio-out (headphone)
Pin
Signal
1
Audio out, left channel
2
Audio out, right channel
3
Ground
Maintenance and Service Guide
9–1
Connector pin assignments
External monitor
9–2
Pin
Signal
1
Red analog
2
Green analog
3
Blue analog
4
Not connected
5
Ground
6
Ground analog
7
Ground analog
8
Ground analog
9
+5 VDC
10
Ground
11
Monitor detect
12
DDC 2B data
13
Horizontal sync
14
Vertical sync
15
DDC 2B clock
Maintenance and Service Guide
Connector pin assignments
HDMI
Pin
Signal
1
Transition minimized differential signal (TDMS) data 2+
2
TDMS data 2 shield
3
TDMS data 2-
4
TDMS data 1+
5
TDMS data 1 shield
6
TDMS data 1 shield
7
TDMS data 0+
8
TDMS data 0 shield
9
TDMS data 0-
10
TDMS clock +
11
TDMS data clock shield
12
TDMS data clock-
13
Consumer electronics control
14
Not connected
15
Display data channel (DDC) clock
16
DDC data
17
Ground
18
+5V Power
19
Hot plug detect
Maintenance and Service Guide
9–3
Connector pin assignments
RJ-45 (network)
Pin
Signal
1
Transmit +
2
Transmit -
3
Receive +
4
Unused
5
Unused
6
Receive -
7
Unused
8
Unused
Universal Serial Bus
9–4
Pin
Signal
1
+5 VDC
2
Data
3
Data +
4
Ground
Maintenance and Service Guide
10
Power cord set requirements
The wide range input feature of the computer permits it to operate from any line voltage from 100 to 120 volts AC
or from 220 to 240 volts AC.
The 3-conductor power cord set included with the computer meets the requirements for use in the country or region
where the equipment is purchased.
Power cord sets for use in other countries and regions must meet the requirements of the country or region where
the computer is used.
Requirements for all countries and regions
The requirements listed below are applicable to all countries and regions:
■
The length of the power cord set must be at least 1.5 m (5.0 ft) and no more than 2.0 m (6.5 ft).
■
All power cord sets must be approved by an acceptable accredited agency responsible for evaluation in the
country or region where the power cord set will be used.
■
The power cord sets must have a minimum current capacity of 10 amps and a nominal voltage rating of 125 or
250 V AC, as required by the power system of each country or region.
■
The appliance coupler must meet the mechanical configuration of an EN 60 320/IEC 320 Standard Sheet C13
connector for mating with the appliance inlet on the back of the computer.
Maintenance and Service Guide
10–1
Power cord set requirements
Requirements for specific countries and regions
Country/region
Accredited agency
Applicable note number
Australia
EANSW
1
Austria
OVE
1
Belgium
CEBC
1
Canada
CSA
2
Denmark
DEMKO
1
Finland
FIMKO
1
France
UTE
1
Germany
VDE
1
Italy
IMQ
1
Japan
METI
3
The Netherlands
KEMA
1
Norway
NEMKO
1
The People's Republic of China
CCC
5
South Korea
EK
4
Sweden
SEMKO
1
Switzerland
SEV
1
Taiwan
BSMI
4
The United Kingdom
BSI
1
The United States
UL
2
1. The flexible cord must be Type HO5VV-F, 3-conductor, 1.0-mm² conductor size. Power cord set fittings (appliance coupler and wall
plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it will be used.
2. The flexible cord must be Type SPT-3 or equivalent, No. 18 AWG, 3-conductor. The wall plug must be a two-pole grounding type
with a NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration.
3. The appliance coupler, flexible cord, and wall plug must bear a “T” mark and registration number in accordance with the Japanese
Dentori Law. The flexible cord must be Type VCT or VCTF, 3-conductor, 1.00-mm² conductor size. The wall plug must be a
two-pole grounding type with a Japanese Industrial Standard C8303 (7 A, 125 V) configuration.
4. The flexible cord must be Type RVV, 3-conductor, 0.75-mm² conductor size. Power cord set fittings (appliance coupler and wall
plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it will be used.
5. The flexible cord must be Type VCTF, 3-conductor, 0.75-mm² conductor size. Power cord set fittings (appliance coupler and wall
plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it will be used.
10–2
Maintenance and Service Guide
11
Recycling
Battery
When a battery has reached the end of its useful life, do not dispose of the battery in general household waste.
Follow the local laws and regulations in your area for computer battery disposal.
Display
Å
WARNING: The backlight contains mercury. Caution must be exercised when removing and handling the backlight to avoid
damaging this component and causing exposure to the mercury.
Ä
CAUTION: The procedures in this chapter can result in damage to display components. The only components intended for
recycling purposes are the liquid crystal display (LCD) panel and the backlight. When you remove these components, handle
them carefully.
Disposal. This HP product contains mercury in the backlight in the display assembly that might
✎ Materials
require special handling at end-of-life. Disposal of mercury may be regulated because of environmental
considerations. For disposal or recycling information, contact your local authorities, or see the Electronic
Industries Alliance (EIA) Web site at http://www.eiae.org.
This section provides disassembly instructions for the display assembly. The display assembly must be
disassembled to gain access to the backlight 1 and the liquid crystal display (LCD) panel 2.
procedures provided in this chapter are general disassembly instructions. Specific details, such as screw
✎ The
sizes, quantities, and locations, and component shapes and sizes, can vary from one computer model to another.
Maintenance and Service Guide
11–1
Recycling
Perform the following steps to disassemble the display assembly:
1. Remove all screw covers 1 and screws 2 that secure the display bezel to the display assembly.
2. Lift up and out on the left and right inside edges 1 and the top and bottom inside edges 2 of the display bezel
until the bezel disengages from the display assembly.
3. Remove the display bezel 3.
11–2
Maintenance and Service Guide
Recycling
4. Disconnect all display panel cables 1 from the display inverter and remove the inverter 2.
5. Remove all screws 1 that secure the display panel assembly to the display enclosure.
6. Remove the display panel assembly 2 from the display enclosure.
7. Turn the display panel assembly upside down.
8. Remove all screws that secure the display panel frame to the display panel.
Maintenance and Service Guide
11–3
Recycling
9. Use a sharp-edged tool to cut the tape 1 that secures the sides of the display panel to the display panel frame.
10. Remove the display panel frame 2 from the display panel.
11. Remove the screws 1 that secure the backlight cover to the display panel.
12. Lift the top edge of the backlight cover 2 and swing it outward.
13. Remove the backlight cover.
14. Turn the display panel right-side up.
15. Remove the backlight cables 1 from the clip 2 in the display panel.
11–4
Maintenance and Service Guide
Recycling
16. Turn the display panel upside down.
17. Remove the backlight frame from the display panel.
Å
WARNING: The backlight contains mercury. Exercise caution when removing and handling the backlight to avoid damaging
this component and causing exposure to the mercury.
18. Remove the backlight from the backlight frame.
Maintenance and Service Guide
11–5
Recycling
19. Disconnect the display cable 1 from the LCD panel.
20. Remove the screws 2 that secure the LCD panel to the display rear panel.
21. Release the LCD panel 3 from the display rear panel.
22. Release the tape 4 that secures the LCD panel to the display rear panel.
23. Remove the LCD panel.
24. Recycle the LCD panel and backlight.
11–6
Maintenance and Service Guide
Index
1394 Power Saving 5–4
A
AC adapter light 2–8
AC adapter, spare part numbers 3–14, 3–15
administrator password 5–3
antenna
disconnecting 4–14, 4–15
locations 2–1
removal 4–36
spare part numbers 3–10, 3–11, 3–20, 3–22, 4–36
audio board
removal 4–44
spare part number 3–7, 3–21, 4–44
audio product description 1–3
audio-in jack
connector pinout 9–1
location 2–6
audio-out jack
connector pinout 9–1
location 2–6
B
backing up
customized window, toolbar, and menu bar settings
8–2
personal files 8–2
templates 8–2
backup suggestions 8–2
base enclosure, spare part number 3–8, 3–21
battery
removal 4–6
spare part numbers 3–8, 3–20, 4–6
battery bay 2–9
battery light 2–4, 2–6
battery release latch 2–9
Bluetooth module
removal 4–43
spare part number 3–7, 3–15, 3–21, 4–43
Bluetooth module cable, spare part number 3–7, 4–43
Blu-ray ROM DVD±R/RW SuperMulti DL Drive
precautions 4–2
removal 4–19
spare part numbers 3–8, 3–13, 3–20, 4–19
specifications 6–5
Maintenance and Service Guide
boot options 5–4
boot order 5–4
bottom components 2–9
button components 2–2
button sound 5–4
buttons
power 2–2
TouchPad 2–5
TouchPad on/off 2–5
volume mute 2–2
wireless 2–2
C
cables, service considerations 4–1
caps lock light 2–4
Card Reader Power Saving 5–4
changing the Setup Utility language 5–1
chipset product description 1–1
components
bottom 2–9
buttons 2–2
display 2–1
fingerprint reader 2–2
front 2–6
keys 2–3
left-side 2–8
lights 2–4
pointing device 2–5
right-side 2–7
top 2–1
computer feet
locations 4–6
spare part number 4–6
computer specifications 6–1
connector pinout
audio-in jack 9–1
audio-out jack 9–1
external monitor port 9–2
HDMI port 9–3
headphone jack 9–1
microphone jack 9–1
monitor port 9–2
network jack 9–4
RJ-45 jack 9–4
USB port 9–4
Index-1
connectors, service considerations 4–1
consumer infrared lens 2–6
D
Diagnostics menu, Setup Utility 5–4
Digital Media Slot 2–7
Digital Media Slot light 2–7
display assembly
removal 4–28
spare part numbers 3–3, 3–20, 3–21, 3–22, 4–28
display bezel
removal 4–33
spare part numbers 3–21, 4–33
display bezel, spare part numbers 3–11
display components 2–1
illustrated 2–1
recycling 11–1
display enclosure
removal 4–30, 4–33
spare part numbers 3–10, 3–11, 3–21, 3–22, 4–30
display hinge
removal 4–32, 4–35
spare part numbers 3–10, 3–11, 3–20, 4–32, 4–35
display inverter, removal 11–3
display panel
product description 1–2
removal 4–34
spare part numbers 3–11, 3–20
display panel cable
removal 4–31, 4–35
spare part numbers 3–10, 3–11, 4–32, 4–35
display panel cable, spare part numbers 3–20
displaying system information 5–2
drive light 2–4, 2–6
drives, boot order 5–4
DVD±RW and CD-RW SuperMulti Double-Layer
Drive
precautions 4–2
removal 4–19
spare part number 3–8, 3–13, 3–20, 4–19
specifications 6–6
E
electrostatic discharge 4–2
equipment guidelines 4–4
eSATA/USB port 2–7
esc key 2–3
Ethernet product description 1–3
exiting the Setup Utility 5–3
ExpressCard slot 2–7
ExpressCard slot bezel, illustrated 3–12
external media card product description 1–4
Index-2
external monitor port
connector pinout 9–2
location 2–7
F
f11 recovery 8–4
fan always on 5–4
fan/heat sink assembly
removal 4–50
spare part numbers 3–8, 3–21, 4–50
feet
locations 4–6
spare part number 4–6
fingerprint reader 2–2
fingerprint reader board
removal 4–41
spare part number 3–7, 3–22, 4–41
fingerprint reader, using in the Setup Utility 5–1
fn key 2–3
front components 2–6
full system recovery 8–1
function keys 2–3
G
graphics product description 1–2
grounding equipment and methods 4–2
H
hard drive
precautions 4–2
product description 1–3
removal 4–8
spare part numbers 3–9, 3–13, 3–20, 3–23, 3–24,
4–8
specifications 6–4
hard drive bay 2–9
hard drive bracket, removal 4–9
hard drive cover
illustrated 3–12
removal 4–8
Hard Drive Hardware Kit, spare part number 3–9, 3–13,
3–22, 4–8
hard drive self test 5–4
HDMI port
connector pinout 9–3
location 2–7
headphone jack
connector pinout 9–1
location 2–6
hinge
removal 4–32
spare part numbers 3–10, 3–11, 3–20, 4–32
Maintenance and Service Guide
I
infrared lens 2–6
internal display switch 2–1
J
jacks
audio-in 2–6
audio-out 2–6
headphone 2–6
microphone 2–6
network 2–7
RJ-45 2–7
K
key components 2–3
keyboard
product description 1–5
removal 4–21
spare part numbers 3–3, 3–4, 3–5, 3–6, 3–17, 3–18,
3–19, 3–20, 3–22, 3–23, 4–21
keys
esc 2–3
fn 2–3
function 2–3
numeric keypad 2–3
Windows applications 2–3
Windows logo 2–3
L
LAN Power Saving 5–4
language support, Setup Utility 5–4
LED board
removal 4–42
spare part number 3–7, 3–22, 4–42
left-side components 2–8
light components 2–4
lights
AC adapter 2–8
battery 2–4, 2–6
caps lock 2–4
Digital Media Slot 2–7
drive 2–4, 2–6
num lock 2–4
optical drive 2–8
power 2–4, 2–6
TouchPad 2–5
volume down 2–4
volume mute 2–4
volume up 2–4
wireless 2–4
M
Main menu, Setup Utility 5–3
mass storage devices, spare part numbers 3–13
Maintenance and Service Guide
memory module
removal 4–10
spare part numbers 3–9, 3–20, 4–10
memory product description 1–2
memory test 5–4
microphone 2–1
microphone jack
connector pinout 9–1
location 2–6
microphone product description 1–3
model name 3–1, 4–5
monitor port
connector pinout 9–2
location 2–7
N
navigating in the Setup Utility 5–2
network jack
connector pinout 9–4
location 2–7
num lock light 2–4
numeric keypad keys 2–3
O
operating system product description 1–6
optical drive
location 2–8
precautions 4–2
product description 1–3
removal 4–19
spare part numbers 3–8, 3–13, 4–19
specifications 6–5, 6–6
optical drive bracket, removal 4–20
optical drive light 2–8
P
packing guidelines 4–3
passwords 5–3
plastic parts 4–1
Plastics Kit
contents 3–12
spare part number 3–7, 3–21
pointing device
components 2–5
illustrated 2–5
product description 1–5
ports
eSATA/USB 2–7
external monitor 2–7
HDMI 2–7
monitor 2–7
USB 2–8
ports product description 1–5
Index-3
power button 2–2
power connector 2–8
power connector and cable
removal 4–46
spare part number 3–7, 3–21, 4–46
power cord
set requirements 10–1
spare part numbers 3–14, 3–15
power light 2–4, 2–6
power requirements product description 1–5
power-on password 5–3
processor
product description 1–1
spare part numbers 3–7, 3–16, 3–17, 3–22, 3–23,
3–24
Processor C6 State 5–4
product description
audio 1–3
chipset 1–1
display panel 1–2
Ethernet 1–3
external media card 1–4
graphics 1–2
hard drive 1–3
keyboard 1–5
memory 1–2
microphone 1–3
operating system 1–6
optical drive 1–3
pointing device 1–5
ports 1–5
power requirements 1–5
processor 1–1
security 1–6
serviceability 1–6
webcam 1–3
wireless 1–4
product name 1–1, 3–1, 4–5
R
recovering a program or driver 8–1
recovering from the dedicated recovery partition 8–4
recovering from the recovery discs 8–4
recovery discs 8–1
Recovery Manager 8–1, 8–4
recovery partition 8–1
recovery, system 8–1, 8–4
recycling
battery 11–1
display components 11–1
removal/replacement
preliminaries 4–1
procedures 4–5
restore points 8–3
Index-4
restoring default settings in the Setup Utility 5–2
right-side components 2–7
RJ-45 jack
connector pinout 9–4
location 2–7
RTC battery
removal 4–18
spare part number 3–9, 3–22, 4–18
Rubber Feet Kit, spare part number 3–8, 3–22, 4–6
S
safeguarding information 8–1
Screw Kit, spare part number 3–14, 3–21
screw listing 7–1
secondary hard drive self test 5–4
security cable slot 2–7
Security menu, Setup Utility 5–3
security product description 1–6
selecting in the Setup Utility 5–2
serial number 3–1, 4–5
service considerations 4–1
service tag 3–1, 4–5
serviceability product description 1–6
Setup Utility
changing the language 5–1
Diagnostics menu 5–4
displaying system information 5–3
exiting 5–3
Main menu 5–3
menus 5–3
navigating and selecting 5–2
restoring default settings 5–2
Security menu 5–3
starting 5–1
System Configuration menu 5–4
using 5–1
SIM slot board
removal 4–16
spare part number 3–9, 3–22, 4–16
SIM, removal 4–16
slots
Digital Media 2–7
ExpressCard 2–7
security cable 2–7
solid-state drive (SSD) 8–1, 8–4
spacebar 2–3
speaker assembly
removal 4–27
spare part number 3–6, 3–21, 4–27
specifications
Blu-ray ROM DVD±R/RW SuperMulti DL Drive
6–5
computer 6–1
display assembly 6–2, 6–3
Maintenance and Service Guide
DVD±RW and CD-RW SuperMulti Double-Layer
Drive 6–6
hard drive 6–4
optical drive 6–5, 6–6
system DMA 6–7
system I/O address 6–9
system interrupt 6–8
system memory map 6–8
supported discs 8–2
switch cover
removal 4–25
spare part numbers 3–3, 3–21, 3–22, 4–25
system board
removal 4–47
spare part numbers 3–7, 3–20, 4–47
System Configuration menu, Setup Utility 5–4
system DMA specifications 6–7
system failure or instability 8–4
system I/O address specifications 6–9
system information 5–3
backing up 8–2
system interrupt specifications 6–8
system memory map specifications 6–8
system recovery 8–1, 8–4
system restore points 8–3
T
tools required 4–1
top components 2–1
top cover
removal 4–37
spare part numbers 3–6, 3–21, 3–22, 4–37
TouchPad 2–5
TouchPad button 2–5
TouchPad light 2–5
TouchPad on/off button 2–5
TouchPad scroll zone 2–5
W
warranty period 3–1, 4–5
webcam
location 2–1
product description 1–3
webcam light 2–1
webcam/microphone module 3–20
removal 4–31, 4–34
spare part number 3–10, 3–11, 4–31, 4–34
Windows applications key 2–3
Windows logo key 2–3
wireless antenna
disconnecting 4–14, 4–15
locations 2–1
removal 4–36
spare part numbers 3–10, 3–11, 3–20, 3–22, 4–36
wireless button 2–2
wireless light 2–4
wireless module compartment 2–9
wireless module compartment cover
illustrated 3–12
removal 4–13
wireless product description 1–4
WLAN module
removal 4–11
spare part numbers 3–8, 3–9, 3–15, 3–16, 3–17,
4–11
WLAN module bracket, removal 4–14
workstation guidelines 4–3
WWAN module
removal 4–15
spare part number 3–8, 3–15, 4–15
U
Universal Serial Bus (USB) port
connector pinout 9–4
location 2–8
USB board
removal 4–45
spare part number 3–7, 3–21, 4–45
using system restore 8–3
V
vents 2–7, 2–9
Virtualization Technology 5–4
volume down light 2–4
volume mute button 2–2
volume mute light 2–4
volume scroll zone 2–2
volume up light 2–4
Maintenance and Service Guide
Index-5
Download PDF