Compatibility Guide External 19.05.11

Equipment Type
Headset Type
Set up Information
3Com
NBX 100 Handset
Headset & Amplifier
Softphones
Any USB Headset
2102, 3101
3102
Headset & Direct Connect Cord
Headset & Amplifier
Aastra
480i, 9133i SIP IP Phone
Headset & Direct Connect Cord
Wireless - EHS Available please refer to EHS Guide
Alcatel / Omni
Single Line Telephone 1000,
1050, 500, 550, 2000, 2730
Not Compatible
Single Line Telephone 1200C,
2111, 2112
Headset & Amplifier
Single Line Telephone 2410,
2412
Headset & Amplifier
5200 Series - Console
Headset & Amplifier
5200 Series - Digital Handset
Headset & Direct Connect Cord
Starswitch - Console
Headset & Amplifier & 2 Prong Plug
Starswitch - Reflexes
Headset & Direct Connect Cord
Auto Programming
4300 Series - Console
Headset & Direct Connect Cord
Auto Programming
Digital Handset 4321, 4304 &
Others
Headset & Direct Connect Cord
Auto Programming
4200 & 4400 Series - 4001,
4003, 4010
Headset & Direct Connect Cord
Phone does not have headset port.
Phone can't be programmed.
4011, 4012, 4020, 4023, 4034,
4035, 4040
Headset & Direct Connect Cord
Phone does not have headset port.
Phone can be programmed to have
release/headset key.
4098 IP Phone 4059 Console
Headset & Direct Connect Cord
Plugs into handset port.
DECT Handsets - 4074B
Not Compatible
DECT Handsets - 4074H, 200
Headset & Curly Cord with 2.5mm Plug
Alcatel IP Phone 4018, 4019
Headset & Direct Connect Cord
Connect via handset port.
Some 4019 models have 3.5mm
headset port
Headset & Curly Cord with 3.5mm Plug
3.5mm headset port; To program
speakerphone key
(Settings/Phone/Jack/Select
Headset)
Alcatel IP Phones 4028, 4038,
4068. Alcatel Omni 4029,
4039; 4068 is Bluetooth
compatible
Wireless - EHS Available please refer to EHS Guide
IP Phone 4047
Headset & Direct Connect Cord
Omni UFKT 10D
UF Director
UF Executive
UF Standard
UF 15
Headset & Curly Cord with Reversed RJ
Omni Keyphone
Headset & Amplifier
Omni T200
Headset & Amplifier
Page 1 of 14
Phone can be programmed except
UF 15. To Program Headset: #,5,6,#
Equipment Type
Headset Type
Pimphony IP Softphone
Headset & Curly Cord with USB
Set up Information
Aria / LG
System Telephones
16/28/34/100/148/162/186
Headset & Direct Connect Cord
Program: TRAN/PNG, 5, 7 enables,
TRAN/PNG, 5, 7 disables; MON is
used to answer & end calls
Select Keysets - 34E/100/186
Headset & Direct Connect Cord
Program: TRAN/PNG, 5, 7 enables,
TRAN/PNG, 5, 7 disables; MON is
used to answer & end calls
System Telephones 20, 50,
300, 600
Headset & Direct Connect Cord
Program: TRAN/PNG, 5, 7 enables,
TRAN/PNG, 5, 7 disables; MON is
used to answer & end calls
LKD8DS
Headset & Direct Connect Cord
Aria 7000 series LKD30DS etc
LDP-700 IP Handsets
Headset & Curly Cord with 2.5mm Plug for Jabra
Headset & Direct Connect Cord with B10 for Soundpro &
Plantronics
Aria 8000 series iPecs
Headset & Direct Connect Cord
Wireless - EHS Available please refer EHS guide
Aria LKD30D, LKD30LD
Headset & Curly Cord with 2.5mm Plug
LG GD36D, KD36D
Headset & Amplifier
7000 series has 2.5mm jack
however phone casing impedes
connection of the cord. Use direct
connect to handset port. Can
program release key: Press Menu,
Advanced Program Select "headset
mode" if via headset port or "ear mic"
if via handset. Make calls with
speaker button.
Can program release key. Program:
TRAN/PNG, 5, 7 enables,
TRAN/PNG, 5, 7 disables, MON is
used to answer and end calls.
Aristel
AV Series: DKP10, DKP30,
DKP31, DKP33, DKP50,
DKP51, DKP53, DKP53B
Headset & Amplifier
To program release/headset key
press speaker #53#
KP10, KP30, DKP30X
Headset & Amplifier
To prgram release/headset key press
speaker #56
DKP50X, DV Series
Headset & Curly Cord with 2.5mm Plug
SP9008 required. If using handset
port to program headset key #56
Teleset 2, Teleset 3
Headset & Direct Connect Cord
Can be programmed. Use either
LHS or RHS port.
Winset
Headset & Direct Connect Cord
Can be programmed.
Aspect
Aurora
ACC3100 / 103 Mini-COM
Headset & Amplifier
Audioline
Tel6, Tel7, Tel8, Tel17, Tel18,
Tel25, Tel51, AUB3, AUB4,
502, 503, 505, 506, Phone
Easy
Headset & Amplifier
Can't be programmed.
Headset & Direct Connect Cord
For GN, set Smartcord compatiblity
dial to 7.
Avaya / Lucent
1400 Series
Wireless - EHS available please refer EHS guide
Page 2 of 14
Equipment Type
Headset Type
1603
Headset & Amplifier
1608 IP & 1616IP
Set up Information
Soundpro requires: SWP Headset
with SPA909
Jabra requires: GN88000103
Plantronics requires: HIS-01 cord
72442-01
Headset & Bottom Cable
Wireless - EHS available please refer EHS guide
Avaya IP Telephone
Series 1: 4606, 4612, 4624
Series 2: 4602, 4620, 4630
Headset & Direct Connect Cord
Plantronics use HIP cord for 4620
pre 2004 manuf date & HIC cord
for post 2004 manuf date.
Wireless - EHS available please refer EHS guide
Avaya INDeX IP/Office
2030, 2060, 2050, 2050IR
Headset & Direct Connect Cord
Use B10 to swap between
handset/headset
2402, 2410, 2420 Series 4621
IP Phone
Headset & Direct Connect Cord
Plantronics requires HIC-01 cord
part# 49323-01
Wireless - EHS available please refer EHS guide
ACD Consoles
Call Master 3 & Call Master 4
Call Master 5 & 6
Headset & Amplifier with 2 Prong Plug
For Plantronics headsets bottom
cable not required as Vista Cord
comes with phone, remove this cord
for Soundpro (which requires
SP5020) & Jabra (which requires
GN27361101) headset.
Headset & Bottom Cable
* Please refer set up information
Call Master 603
Call Master Plus
Attendant Console 302
Headset & Amplifier with 2 Prong Plug
4400 Series, 4610
Headset & Amplifier
Plantronics requires HIC-01 cord
part# 49323-01
Wireless - EHS available please refer EHS guide
5400 Series 5420, 5610
Headset & Direct Connect Cord
Plantronics requires HIC-01 cord
part# 49323-01
Wireless - EHS available please refer EHS guide
IP Series 5601, 5602, 5608 &
5620
Plantronics requires HIC-01 cord
part# 49323-01
Headset & Amplifier
Wireless - EHS available please refer EHS guide
6408D+M Series
6416D+M Series
6424D+M Series
Plantronics requires HIC-01 cord
part# 49323-01
Headset & Amplifier
Wireless - EHS available please refer EHS guide
6408D+, 6416D+ & 6424D+
Headset & Direct Connect Cord
Plantronics requires HIC-01 cord
part# 49323-01. Phone needs to be
programmed with a release/headset
key to deactivate calls. Remove the
telephone handset & plug headset
into socket, all calls via headset only
or use B10 to switch from
handset/headset.
7400 Series 7401, 7401Plus,
7406, 7406Plus, 7407,
7407Plus, 7410, 7410Plus,
7434, 7444 & 7444Plus
Headset & Direct Connect Cord
Plantronics requires HIC-01 cord
part# 49323-01. Phone must be
programmed with a release key.
Headset & Direct Connect Cord
Plantronics requires HIC-01 cord
part# 49323-01. Plug into headset
socket, will lose the use of the
handset. Can be programmed.
Reverse handset wall mounting hook
to keep handset from depressing
hook.
8400 Series, 8403, 8410B,
8410D & 8434DX
Page 3 of 14
Equipment Type
Headset Type
Set up Information
9101 & 9103
Headset & Direct Connect Cord
Plantronics requires HIC-01 cord
part# 49323-01. Connect via
handset port, can use B10 to
switch from handset/headset.
Voiceworks CS, Voiceworks
ACS - 910, 930, 930a, 960a
Headset & Direct Connect Cord
Plantronics requires HIC-01 cord
part# 49323-01.
9611G
Plantronics Headset & HIS-01 Cable
Part number: 72442-01
Headset & Bottom Cable
Soundpro requires: SWP Headset
with SPA909
Jabra requires: GN88000103
Plantronics requires: HIS-01 cord
72442-01
9620, 9630, 9640, 9650
Wireless - EHS available please refer EHS guide
AT&T Digital
Headset & Amplifier
British Telecom (BT)
Dealing room system 12000,
601, 80/30, 60/50, CT100,
CT250
Headset & Amplifier
May require 6x4 modular stub &
socket cables
Headset & Direct Connect Cord with Reversed RJ
Headset connects via handset port.
Can use B10 to swap between
handset/headset. B10 setting A1 on
7912. B10 setting A4 on 7911.
Headset & Bottom Cable
Soundpro requires: SP5020,
Jabra requires: GN27361101 &
Plantronics requires: SP9007.
Dedicated headset port. *CS60 in
handset port only, use New Call/End
Call key with handset on hook.
7941 needs KJBOX to use handset
via Soundshield. 7960: CS60
settings w/out HL10: connect to
headset port, Config 4, tx B rx 3.
CISCO
7911, 7912 IP Phones
7902, 7905, 7910, 7931, 7940,
7941, 7942, 7960, 7961,
7962G, 7970, 7970 IP Phones
Wireless - EHS available please refer EHS guide
Recommendations: Bluetooth
wireless headset or M175C
7925 IP Phone
Headset with 2.5mm Plug
7920
Headset & Curly Cord with 2.5mm Plug
Wireless - EHS available please refer EHS guide
521G, 521SG, 524G, 524SG,
SPA525G IP Phones
Headset & Curly Cord with 2.5mm Plug
921, 941, 942, 962, SPA942 IP
Phones
Headset & Curly Cord with 2.5mm Plug
9971
Soundpro requires: SP5020
Jabra requires: GN8801199
Plantronics requirs: SP9007.
Please note smart cord for Jabra
(GN8801199) setting on 2
Headset & Bottom Cable
Wireless - EHS available please refer EHS guide
Commander
Commander AN
Not Compatible
Commander BN
Headset & Amplifier
Can't be programmed
Commander D
Headset & Bottom Cable
Soundpro requires: SP5020,
Jabra requires: GN27361101,
Plantronics requires: SP9007.
Headset program (SPKR) 626
(SPKR)
Commander E
Headset & Amplifier
Page 4 of 14
Equipment Type
Headset Type
Set up Information
Commander F
Headset & Amplifier
Commander HX
Headset & Amplifier
Headset program: press #151#;
Handset program: press #150#
Commander I
Headset & Direct Connect Cord
Plantronics requires HIC-01 cord
part# 49323-01. Can be
programmed
Commander N
Headset & Amplifier
Only if hardwired cord has been
modified
Commander NT - Principle,
Advantage, Standard,
Economy
Headset & Direct Connect Cord OR Headset & Amplifier
The Economy station does not
have a headset socket. Set Amp
through handset socket. Handsfree
key will operate as headset release
key when headset is in use.
Commander S206, 408, 824
Headset & Amplifier
Commander S207, 416, 620
Commander T105
Not Compatible
Commander T106, 210
Headset & Amplifier
Commander Elite
Headset & Direct Connect Cord
Commander Vision
Headset & Direct Connect Cord
Headset connects via handset port.
Can use B10 to swap between
handset/headset.
Commander Connect 760/40,
760/41
Headset & Direct Connect Cord
Use programming buttons to select
headset mode.
Headset & Bottom Cable
Soundpro requires: SP5020,
Jabra requires: GN27361101,
Plantronics requires: SP9007.
Requires D modification - phone
specific product.
Datapoint
Infoswitch ACD
DBA
SmartTalk 308
Headset & Amplifier
SmartTalk TNG3
Headset & Amplifier
DeTeWe
OpenCom 100 Series, 73IP,
75IP
Headset & Curly Cord with RJ45 Plug
Use CS60 with AP1. No GN1000 or
HL10.
DORO
Congress 100, 200, 305
Headset & Direct Connect Cord
AFTI 20, 22, 30, 40 CRT10
Headset & Amplifier
Ericsson
ASB30 Console
ASB100 Console
ASB900 Console
Headset & Amplifier
ACP1000
Headset & Amplifier
BCS 150 - Console 2754
Headset & Amplifier
Lemo Plug required - supplied by
Ericsson.
BCS 150 - 2751, 2752, 2755,
2753
Headset & Amplifier
Can be programmed. Can use
direct connect headsets but receive
may be low.
BP24, 40, 50, BP8-111c
Headset & Amplifier
Lemo Plug required - supplied by
Ericsson.
Page 5 of 14
Equipment Type
Headset Type
Set up Information
Select
Headset & Amplifier
Headset switch on phone
MD110/BP150/BP250/MD
Express, 199/202/203,
DBC 2011, 22401,
Dialog 3000 Series
3201/3202/3203/3210/3211/32
13 Console 2663
Headset & Amplifier
Can be programmed. Can use direct
connect headsets but receive may
be low.
Dialog 4000 Series for
MD110, 4220 Lite
Headset & Amplifier
No headset port or release key. Can
use direct connect headsets but
receive may be low
4222/4223/4224/4225
Headset & Direct Connect Cord
Headset port with release key. Note:
On 4222, CS60 only works in
handset port.
IP Series 4422, 4425
Headset & Direct Connect Cord
DBC-503, 214
Headset & Amplifier
Tempo 28I / 96i
Headset & Amplifier
Dialog 2561
Headset & Amplifier
DBC 22201, 22301
Headset & Direct Connect Cord
Can't be programmed
Fujitsu
F600 Series - Attendant
(610 / 620 / 640) Console,
AT-I, AT-II, AT-III, AT-IV
Headset & Amplifier
Can be programmed.
E600 Essence - Attendant
Console, DTLE48D, FDT-1,
FDT-3, FDT-4, WINATT
Consoles (E630 / E650)
Headset & Amplifier
Can be programmed.
F9600 Series - ATTCON D6,
ATTCON D7, MLDTI, MLDTII,
MLDTIII, MLDTIV, DT12DS,
DT24DS
Headset & Amplifier
Plantronics requires Fujitsu Cord
part# 21847-06
F9600 Series - AT, ET Phones
Headset & Direct Connect with Reversed RJ
Coral - IA-2002 / IA2002 BL,
TA-2002H / TA-2002HBL, DST
(Digital Std Tel)
DKT-1110 / DKT-1110 BL,
DXT-2320 / DKT-2320 BL,
DKT-2321 / DKT-2321 BL,
DKT-2322 / DKT-2322 BL,
GKT-4320 / GKT- 4320 BL
Headset & Direct Connect Cord
Headset key can be programmed by
technician from maintenance
console
Flexset 280D
Headset & Direct Connect Cord
If using B10: setting 4B
M3000/M5000
Headset & Amplifier with PL Plug
PL Plug also known as BPO 431 or
BPO Left - phone specific product.
ISDX MKI, MKIII, MKIIIA,
MKIV Screen Console
Headset & Amplifier with PR Plug
PR Plug also known as BPO 430 or
BPO Right - phone specific product.
ISDT, ISDT300 DX 20 Console
Headset & Amplifier
CDSS System
Headset & Amplifier with J Plug
M8/M8+ Handset
M1000/M2000
Not Compatible
GPT Plessey
Hyundai
Page 6 of 14
J Plug also known as BPO 420
(phone specific product)
Equipment Type
Headset Type
Set up Information
Headset & Amplifier
For HX, program headset with
handset on receiver ### (on) and
##* (off)
DK1-21, DK2-21, DK3-21,
DK6-21, DK6-31, DK6-33
Headset & Direct Connect Cord
Headset Mode "Speaker 775" Some
phones are Bluetooth enabled but
can not be used with BT headsets
that require passwords (eg Voyager's
or Jabra M5390)
KPU61H, AK1-21
Headset & Amplifier
Plantronics requires Fujitsu cord
part# 21847-06. Headset Mode
"Speaker 775"
DK1-31, DK3-31, DK3-33,
AK1-23, KPU61, KPU62,
KPU63, AK1-22
Headset & Amplifier
Headset Mode "Speaker 775"
KPU63 can't be programmed
DK7, DK7-21
Headset & Amplifier
Handsets
Hybrex
IPC
Headset with Bottom Cable
Plantronics requires part#
SP9018. Connect via B10 switcher.
Do not use A10-16. All wireless will
work.
9825, 9826, 9836, 9837,
IQTEL80, IQTEL300,
IQTEL500, IQ50, IQ90, IQ250,
IQ450, IQE2, IQE3, Studio
Series 20 / 25
Headset & Amplifier
Phone can't be programmed, will
need to lift handset on/off hook to
answer/end calls.
IQTEL300 Headset Mode
IQTEL500 Headset Mode
Headset & Direct Connect Cord
IQ350, IQ550, 260, 360, 333,
560, 750, IDEA 330, 331
Headset & Direct Connect Cord
Choose "P" switch on phone
Leaderphone HS Series 726,
852, 1025HS, 1026, 1026HS
Headset & Bottom Cable
Soundpro requires: SP5020 Jabra
requires: GN27361101 Plantronics
requires: SP9007
Handsets
Headset & Amplifier
Can't be programmed.
PHB1100, PHM1200
Headset & Bottom Cable
Soundpro requires: SP5020
Jabra requires: GN27361101
Plantronics requires: SP9007
SPA901
Headset & Amplifier
SPA921, SPA922, SPA941,
SPA942, SPA962
Headset & Curly Cord with 2.5mm Plug
IQMX Trading Turret
Interquartz
Leader
Linksys
Matrix
EON48, NEO10
Headset & Direct Connect Cord
Mitel
SX2000 - Console & Handset
Headset & Amplifier
16E/24E - Superset 3 & 4
Headset & Amplifier
Consoles 6, 7, 7000PC
Headset & Amplifier with 2 Prong Plug
Page 7 of 14
Equipment Type
Headset Type
SuperSet 4000 Series 4015,
4025, 4125, 4150
Set up Information
Headset & Direct Connect Cord
5001 & 5201
Headset & Amplifier
5000 & 5200 Series IP Phones
5005, 5010, 5020, 5020i, 5140,
5205, 5215, 5220, 5230, 5240,
5320, 5330, 5340, 5312
Headset & Direct Connect Cord
5005, 5205 release key
programmable. All others have
headset port & release key as
standard. 5312/5330/5340 can't
use lifter - phone is angled too high.
5550 IP Phone
Headset & Direct Connect Cord
No handset cradle so can't use
handset lifter.
NEC
AT3 / AT3B / AT30
Headset & Amplifier
NEAX 7400 ICS - SN694,
SN626, SN708, HA630Z Also
known as ETJ Series
Headset & Amplifier
Phone has existing NEC Slim line K
Plug, (2 prong) Amp connects into K
Plug
Dterm 8DC, 16DS, 16DD,
24DS
Also known as ETJ Series
Headset & Amplifier
If phone has existing NEC ADA1
adapter, direct connect headset is
recommended & then phone can be
programmed.
* Please refer to set up information
NEAX7400IMX - SN716 Dterm
DTP8, DTP16D (65 series)
Dterm75
Also known as ETJ Series
Headset & Direct Connect Cord
Can be programmed by phone
technician. Models vary so not all
will have headset port - use headset
& amp.
* Please refer to set up information
DTP32D
Headset & Direct Connect Cord
Can be programmed by phone
technician.
NEAX2400 - SN611 Console
(2400 SDS)
Also known as ETE Series
Headset & Amplifier
Remove large plate under unit by
lifting leaver on right side. Slide
plate towards you. Set the four
position to D
NEAX 2400 - HA630Z
Console, SN626
Also known as ETE Series
Headset & Amplifier with 2 Prong Plug
NEAX 2400 - Dterm HB, Dterm
IIB, DtermIII, Dterm 6D, Dterm
16D, Dterm V
Also known as ETE Series
Headset & Amplifier
Dterm 6D, 16D & V can be
programmed by phone technician
NECD3, D5
Headset & Amplifier
D5 can have release key
Ranger AK
Headset & Amplifier
For Plantronics if buzzing occurs,
reverse cable on Amp
Ranger DK/NDK
Also known as ETW Series
Headset & Amplifier
If phone has existing NEC ADA1
adapter, direct connect headset is
recommended & then phone can be
programmed
NDK9000
Also known as ETW Series
Headset & Amplifier
Ranger Pro - DTU8 (Pro Talk)
DTU16D (Pro Exec) DTU32D
(Pro Mstr)
Headset & Direct Connect Cord
Can be programmed by phone
technician
Xen Axis, Master - DTU
Handsets IPK / Look / Exec /
Pro
Headset & Direct Connect Cord
Can be programmed by phone
technician
Xen Alpha Handsets - DTB
Handsets Talk / Vision
Handsets
Headset & Bottom Cable
Soundpro requires: SP5020
Jabra requires: GN27361101
Plantronics requires: SP9007
Can't be programmed
Xen Topaz Handsets - Topaz
Talk / Topaz Vision
Headset & Amplifier
No Headset Port
Dterm i Series, Aspire ITR
8D3A
Headset & Direct Connect Cord
Can be programmed by phone
technician
Page 8 of 14
Equipment Type
Headset Type
Set up Information
Electra Elite Dterm Series E
DTU-8, DTU-8D, DTU-16,
DTU-16D, DTU-32, DTU-32D,
DTP-8, DTP-8D, DTP-16,
DTP-16D, DTP-32, DTP-32D
Headset & Direct Connect Cord
DTR 16D
Headset & Direct Connect Cord
DT300, DT700 IP Phone
Headset & Direct Connect Cord
Nitsuko
DX Series
Headset & Direct Connect Cord
TX Series
Headset & Amplifier
Can be programmed by technician
or lift handset on/off hook
Nortel/Meridian/Exicom
SL-1, 100 Digital
Headset & Amplifier
Meridian - M1250 Console,
M1309 ACD Handset
M2216 ACD Handset
Headset & Amplifier
M1250 requires K (2 prong) plug.
Can be programmed by phone
technician. Turn handset volume
down, use Amp to control volume.
* Please refer to set up information
M2006, M2008, M2317,
M5216, M5316 (aka 578/19)
Headset & Amplifier
Can be programmed by phone
technician
M2216
Headset & Direct Connect Cord
Connect to Handset Port
M2616, M6320
Headset & Direct Connect Cord
Can be programmed by phone
technician
M2250 Console
Headset & Amplifier with 2 Prong Plug
Console volume down, use Amp to
control volume. Can use wireless
headset with 2 Prong Plug, can't
use handset lifter
GSX Range, GDK Range Elite, Aria 2 Button, 8 Button,
30 Button, Director
Headset & Amplifier
Can be programmed by phone
technician. Turn handset volume
down, use Amp to control volume.
For Plantronics phone models GSX,
GDK change to setting 1 on amp
and no batteries in Amp.
3901
Headset & Amplifier
Business Series Terminals
T7100
Headset & Amplifier
1002, 1004, 1007 IP Phone
1120e, 1140e, 1150e
IP Phones 2002, 2004, 2007
IP Phone
Headset & Direct Connect Cord
1140 angle too steep for handset
lifter
Wireless - EHS Available please refer EHS guide
M3902
Headset & Amplifier
M3903, M3904, M3905,
M7208, M7310, M7308,
M7316, M7324, M7900,
T7208, T7316, NT8B20,
NT8B30, NT8B40, NT8B50,
NTZK23AA
Headset & Direct Connect Cord
Or use headset & amp via headset
port to allow onhook use. CS60:
rotary setting = 1; TX under base =
B; RX on rear = 2.
Exicom Goldstar KD36W
Headset & Direct Connect Cord
Connect to handset port
BCM Series (Business Call
Manager)
Headset & Direct Connect Cord
OKI
IP-10DS & U-24D
Headset & Amplifier
Can programme ans/release key
Page 9 of 14
Equipment Type
Headset Type
Set up Information
IP-20DHF
Headset & Direct Connect Cord
Ri-30D
Headset & Amplifier
Program speaker button for headset:
Menu, Others, No.2
Headset/Handset, No.3 Headset 1
Headset & Direct Connect Cord
Set polarity switch to "2"
KXT Range (analogue)
123210, 123220, 123235,
123250, 1232TD, 2332, 2315,
2260, KX-T7750AL
Headset & Amplifier
Phone can't be programmed
Analogue Properietary
Handsets 7030, 7050A,
7250AL, 7450, 7330, 7350,
7665, KX-F50
Headset & Amplifier
Oricom
TP29
Panasonic
KXT AL Range 7220, 7230,
7235, 7433, 7560, 7565
Digital Proprietary Handsets
KX-T7433AL, T7436AL,
T7425AL
Headset & Direct Connect with Reversed RJ
Analogue Handsets
KX-T7730AL, KX-TG2421,
KX-TG2431, KX-TG5821,
5822, 5838, 5839
Headset & Curly Cord with 2.5mm Plug
Hybrid IP-PBX Range
KX-T7633AL, T7630AL,
T7625AL, KX-T7667
DP Handsets KX-DT333,
KX-DT343, KX-DT346
Headset & Curly Cord with 2.5mm Plug
IP Phone KXNT321
Headset & Curly Cord with 2.5mm Plug
Headset programming - press
PROGRAM, dial 999, dial 1 for
handset or 2 for headset, followed by
STORE, PROGRAM
Headset programming - On 7630
press PROGRAM button - press the
button on the phone you wish to
assign as the headset button, prett
the up & down key/toggle until
"headset" appears on the display,
press STORE. To exit either lift
handset or replace in cradle to return
to idle mode. To activate headset
press this button & light will come
on. Once light is on then using the
handsfree button will answer & hang
up calls. Handsfree facility does not
function when phone is in headset
mode.
Phillips
7655
Headset & Direct Connect Cord with Reversed RJ
D1200 Console
Headset & Amplifier with 2 Prong Plug
D1200 Handsets 30P,
IS Series, SBX Range
Headset & Amplifier
Sopho S & Sopho K Console
Headset & Amplifier
Sopho S & Sopho K Handsets
Headset & Amplifier
Plantronics requires: P10
Requires D Plug, also known as FKS
plug (Phone specific product)
Polaris NRX Business Telephones
NRX-1, NRX-4
Need to lift handset on/off hook to
answer/end calls
Headset & Amplifier
Page 10 of 14
Equipment Type
NRX-2H, NRX-3, NRX-5,
NRX-6H
NRXEVO250, NRXEVO350,
NRXEVO450
Headset Type
Set up Information
Headset & Bottom Cable
Soundpro requires: SP5020
Jabra requires: GN27361101
Plantronics requires: SP9007.
Headset & Bottom Cable
Soundpro requires: SP5020
Jabra requires: GN27361101
Plantronics requires: SP9007.
GN1000 does not give incoming call
alert.
* Wireless - please refer to set up information
Polycom IP Telephones
IP300, IP500, IP600
Headset & Direct Connect Cord
Wireless - EHS Available please refer EHS Guide
IP330, IP601
Headset & Curly Cord with 2.5mm Plug
Wireless - EHS Available please refer EHS Guide
CX200, CX700
Headset & Direct Connect Cord
Can't use handset lifters
Rockwell
Sectra View 1, 2, Set
Convergence
Headset & Amplifier
Transend
Headset & Amplifier
Spectraset 150
Headset & Direct Connect Cord
Samsung
DCS, DCS 70 & DCS Compact
SLTe, 6B Basic, STD 12B,
LCD24B, LCDivory 24B,
Economy Digital
Headset & Direct Connect Cord
DX Series
Headset & Direct Connect Cord
DCS Gateway
Headset & Amplifier
HX - Standard or Executive
Keystation
Headset & Amplifier
DS 5000 Series / DS 5021D
Headset & Amplifier
DECT Handsets (SPR5000)
Not Compatible
Fax Machines: SF150,
SF110T, SF1600, SF2900M,
SF4000, SF4100, SF4120,
SF5500, SF5600, SF6050
Headset & Amplifier
To enable ANS/RLS key press TRSF
110 then 20 for handset or 21 for
headset & press TRSF to store.
ANS/RLS light will be on to indicate
headset is active. *For DCS #151#
for ON & #150# for OFF* Please
note: iDCS 8D Handset SW10ND
is recommended.
To enable ANS/RLS key press TRSF
110 then 20 for handset or 21 for
headset & press TRSF to store.
ANS/RLS light will be on to indicate
headset is active.
ShoreTel
IP 110, IP115
IP 212K, IP 230, IP230g,
IP 265, IP560, IP560g, IP565g
Headset & Amplifier
Soundpro requires: SWP Headset
& SPA908
Jabra requires: GN8801199
Plantronics requires: SPA908.
Bluetooth Compatible
Headset & Bottom Cable
Wireless - EHS available please refer EHS guide
Softphone
Any USB Headset
Page 11 of 14
Equipment Type
Headset Type
Set up Information
ISDX System - Console
MK 1, MK111, MK111A, MKV1
Headset & Amplifier
Occasionally requires U plug, also
known as BPO 430 - phone specific
product
ISDX System ISDT, ISDT300,
QLINK agent set
Headset & Direct Connect Cord
Wiring varies, compatiblity is not
gauranteed.
ISDX System - ISDT 300+
M8 / M8+ / M1200 / M2000
Not Compatible
ISDX System - Multiline
ML16S/M3000
Headset & Direct Connect Cord
Requires U plug, also known as
BPO - 430 phone specific product.
Turn handset volume down, use
Amp to control volume.
CDSS System Console
Headset & Amplifier
Requires U plug, also known as
BPO 430 - phone specific product.
Turn handset volume down, use
Amp to control volume.
Hicom 110/120/130
Ultraset Standard
Comfort Ultraset
Headset & Amplifier
Release key programmable, replaces
handsfree function but only available
on version 2 with comfort phone
Hicom 100 - T8, T16D
Headset & Amplifier
Hicom 100 - T16
Headset & Direct Connect Cord
Hicom 400 / 300 / 118 / 150
Optiset E - Entry / Memory
Basic Standard / Advance
Headset & Direct Connect Cord
Siemens
Can be programmed. Plug into
handset socket.
Wireless - EHS available refer EHS guide
Advance Plus
Headset & Amplifier
Plug into handset socket
EMS Attendant Console
12000, 601, 80/30, 60/60
Headset & Amplifier
Requires M plug - phone specific
product
2 Wire Telephones
Profiset 10 & 20
Set 211, Set 221
Headset & Amplifier
PC Based Optiset
Headset & Amplifier
Optipoint 400, 500
Entry & Economy
Headset & Amplifier
Requires adapter sect AC2 between
handset & amplifier. Adapter
available as an accessory with Hicom
Wireless - EHS available refer EHS guide
Optipoint 400, 500
Standard & Advance
Headset & Direct Connect Cord
Wireless - EHS available refer EHS guide
Snom
300, 320, 360, 370
Headset & Direct Connect Cord
820, 821, & 870
Headset & Direct Connect Cord with Reversed RJ
Wireless - EHS available through SNOM distributor
SOX / Tennyson
Handset
Headset & Direct Connect Cord
Sun Moon Star
Digital Key System
Headset & Amplifier
Tandberg
Page 12 of 14
0 is headset off, 1 is headset on.
Use speaker/handsfree button for
headset operation. Use setting No 5
to adjust volume.
Equipment Type
Headset Type
Set up Information
150MXP Videophone
Headset & Curly Cord with 2.5mm Plug
Telstra
Access 25 & 35
Access 228, 248
Headset & Amplifier
Telstra Slim 50
Not Compatible
Telstra E PABX
Headset & Amplifier
Handset is hardwired
Touchfone 200, 300, 400
Executive T1000S T1000CND
Headset & Bottom Cable
Soundpro requires: SP5020
Jabra requires: GN27361101
Plantronics requires: SP9007 or
Amp. Phone can't be programmed.
*Please note T1000 need KJBOX
to use handset via Soundshield.
M5216 P ACD (discontinued)
Headset & Direct Connect Cord
Dedicated headset port. Headset
auto select (Program) (Headset)
M6320
Headset & Direct Connect Cord
M7310N
Headset & Direct Connect Cord
Freedom 500
Headset with 3.5mm Right Angle QD Cord
Recommend only Plantronics part number for cord is SP9027
Spectrum M5316 P Prof
Headset & Amplifier
Amp can be plugged into either
headset or handset socket (direct
connect headsets may cause low
receive volumes)
Spectrum BT450
Headset & Bottom Cable
Soundpro requires: SP5020
Jabra requires: GN27361101
Plantronics requires: SP9007
Spectrum M5317
Headset & Amplifier
Amp can be plugged inot headset or
handset socket. Direct Connect
headsets may cause low volume.
Strata CT, Strata DK PABX
with: Handsets 2500 Series
Handsets 3500 Series
Headset & Amplifier
If customer has DK/HEAD adaptor
from Toshiba, can use direct
connect. DKT 2000 series use GN
Smart Cord on Setting 7
3000 Series
Headset & Direct Connect Cord
Toshiba
Uniden
FP099, FP103, FP105
Headset & Amplifier
SSE17+1
Not Compatible
Yealink
T-26P, T-28, T-28P, T-22 &
EXP39
Headset & Direct Connect Cord
Wireless - EHS available through Yealink distributor
Zultys
ZIP2x2
Headset & Direct Connect Cord
ZIP4x4, ZIP4x5
Headset & Curly Cord with 2.5mm Plug
Page 13 of 14
Connect via handset port, leave
handset on hook. Please note
GN1000 is to big for this handset
and other ZIP2 models
Equipment Type
Headset Type
Set up Information
ZIP4x4L
Headset & Amplifier with 2 Prong Plug
Plantronics requires: P10 amp
with 2 Prong Plug. PC Headsets
with soundcard conn also work in
headset port. Wireless units - use
handset port
51i, 53i, 55i, 57i, 71i
Headset & Direct Connect Cord
Wireless - EHS Available please refer to EHS Guide
Page 14 of 14