Windsor | 10120270 | MODEL: SRXP15 10120270

120V
MODEL: SRXP15
10120270
86269790-D 04/2010
PRV NO. 980003
GROUNDING INSTRUCTIONS
This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path
of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped
with a cord having an equipment-grounding conductor and grounding plug. The plug must be inserted
into an appropriate outlet that is properly installed and grounded in accordance with all local codes
and ordinances.
WARNING
Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or service person if you are in doubt as to whether the outlet is
properly grounded. Do not modify the plug provided with the appliance – if it will not fit the outlet,
have a proper outlet installed by a qualified electrician.
This appliance is for use on a nominal 120-volt circuit, and has a grounded plug that looks like the
plug illustrated in sketch A. A temporary adaptor that looks like the adaptor illustrated in sketches B
and C may be used to connect this plug to a 2-pole receptacle as shown in sketch B if a properly
grounded outlet is not available. The temporary adaptor should be used only until a properly
grounded outlet (sketch A) can be installed by a qualified electrician. The green colored rigid ear, lug,
or the like extending from the adaptor must be connected to a permanent ground such as a properly
grounded outlet box cover. Whenever the adaptor is used, it must be held in place by a metal screw.
Note: In Canada, the use of a temporary adaptor is not permitted by the Canadian Electrical Code.
GROUNDED
OUTLET BOX
GROUNDED
OUTLET
ADAPTER
TAB FOR
GROUNDING SCREW
METAL SCREW
GROUNDING
PIN
(A)
(B)
(C)
INSTRUCCIONES PARA LA PUESTA A TIERRA
Este dispositivo tiene que ser puesto debidamente a tierra. Si se produce una avería o rotura, la
conexión a tierra constituye el camino de menor resistencia para la corriente eléctrica, reduciéndose el
riesgo de descargas peligrosas. El aparato cuenta con un cable con conductor de puesta a tierra y un
enchufe con clavija de puesta a tierra. Hay que conectar el enchufe a una toma de corriente adecuada,
instalada y puesta a tierra de acuerdo con las normas y ordenanzas locales.
ADVERTENCIA
Si se conecta de modo inadecuado el conductor de puesta a tierra del aparato pueden producirse
descargas eléctricas peligrosas para el usuario. En caso de dudas, pedir a un electricista
debidamente cualificado o a un técnico del servicio postventa que verifique que la toma de corriente
está bien puesta a tierra. Si el enchufe suministrado con el aparato no se adapta a la toma de corriente
disponible, no hay que modificar el enchufe, sino dirigirse a un electricista para que instale una tome de
corriente adecuada.
El aparato está dimensionado para su conexión a una red de 120 Voltios de tensión nominal, y cuenta
con un enchufe con clavija de puesta a tierra como el que se muestra en la figura A. Si no se dispone
de una toma de corriente con puesta a tierra, puede utilizarse un adaptador temporal como el que se
muestra en las figuras B y C para conectar el aparato a una toma de corriente de 2 polos como la que
aparece en la figura B. Hay que emplear este adaptador solamente durante el tiempo necesario hasta
que el electricista haya instalado una toma de corriente conectada debidamente a tierra (figura A). La
lengüeta, argolla o elemento similar de color verde que sobresale del adaptador tiene que ser
conectada a una toma de tierra permanente, tal como la cubierta metálica de puesta a tierra de la caja
de enchufe. Siempre que se utilice el adaptado hay que mantener esta toma tierra en su posición con
ayuda de un tornillo metálico.
Advertencia: en Canadá, la Canadian Electrical Code prohíbe el uso de adaptadores temporales.
CAJA DE ENCHUFE
CON TOMA
DE CORRIENTE
CONECTADA A
TIERRA
TOMA DE CORRIENTE
CONECTADA A TIERRA
ADAPTADOR
TORNILLO METALICO
APENDICE PARA
TORNILLO DE CONEXION
A TIERRA
CLAVIJA DE
PUESTA A TIERRA
(A)
(B)
(C)
PARTS LIST / XP15 / 120V
PARTS LIST / XP15 / 120V
POS
PRODUCT
CODE
PRV NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
27
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
46
47
48
49
51
52
53
54
55
56
86142430
86142340
86141970
86135510
86000880
86145640
86145700
86139280
86016900
86137780
86142310
86147140
86142300
86147030
86142650
86141550
86140830
86145340
86140810
86144760
86144770
86138050
86141860
86000500
86005220
86142910
86139970
86141620
86145320
86139290
86141090
86143140
86142290
86143060
86145350
86139450
86139260
86144620
86142880
86139320
86144900
86144930
86141250
86140080
86145280
86144910
86143120
86141120
86141190
86140860
86146310
5625UL
5296EW
5359HG
23011
0532
5160BLU
5161HG
5162
0103ER
0846
5256ER
0129
5187
0102
5040HG
5045HG
5803HG
5319
5706BL
5091
5360
5324
5800WI
5300
5301ER
5380HG
1073
5208
5210
5164
5082BLU
5098HG
5099
0187
5146
5145HG
5144HG
5424DG
5255ER
5266
5043
5289
5281HG
1823HG
5084
5163
5083
5085HG
5215UL
1092JE
1491JE
DESCRIPTION
HANDLE COMPLETE
HANDLE GRIP, SR GRY
GROMMET
CORD SET, 18/3 SJT RIB X40’ BLU
SWITCH / BLUE
SWITCH CAP
SWITCH CAP HOLDER GRY
CABLE CLAMP
SCREW C 3,9x16
ANTISTATIC WIRE
HANDLE CABLE 3WIRE W/CONNECTOR
SCREW, M4 x 12
HANDLE TUBE
SCREW M3,9x13 MM DIN 7981
HOSE, SENSOR GRY
EXTENSION TUBE, GRY
COVER
SPRING, BAG HOLDER
COVER RELEASE, BLUE
SAFETY CATCH SPRING
SAFETY CATCH, BAG HOLDER
BAG HOLDER
FRONT COVER COMPLETE
SENSOR FILTER BAG PACK
MICRO HYGIENE FILTER
INTERNAL COVER
CLAMP
FILTER SAFETY CATCH
SPRING (MICRO FILTER CATCH)
CABLE CLAMP
DUST BAG HOUSING LOCKING
LOCK CATCH GRY
HANDLE LOCK PLATE
LOCK PIN 4 x 33,5
STOP SPRING (HOOK)
CARRYING HANDLE GRY
CABLE HOOK LT GRY
RETAINING RING, DK GRY
INTERNAL CABLE 3WIRE LOOSE CON
CABLE CLAMP (FILTER BAG HSNG)
SEAL
SEAL, FILTER TUBE
DUST BAG HOUSING, 3-WIRE
CLIP, DUST BAG HOUSING
SPRING, LOCKING ROD
SEAL, FILTER BAG HOUSING NECK
LOCKING ROD, DUST BAG HOLDER
DUST BAG HOUS.BUMPER BASE
DUST BAG HOUSING, SR’S, 3-WIRE
CREVICE TOOL
UPHOLSTERY NOZZLE
PARTS LIST / XP15 / 120V
PARTS LIST / SENSOR XP15 / 120V
POS
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
PRODUCT
CODE
86144350
86141430
86141450
86141410
86146140
86143200
86147030
86139230
86145120
86146090
86146150
86146130
86137660
86144650
86138650
86145290
86137980
86293260
86137990
86146670
86146570
86140000
86138170
86138810
86138970
86144730
86137720
86138000
86145330
86142560
86147150
86147170
86143920
86145080
86138320
86138340
86144950
86146790
86146800
86144850
86139900
86139400
86146210
86143630
86144710
86143620
86145470
86145460
86143570
86140160
86147160
86147190
86140760
86145060
86147050
86138240
86005000
86138210
86016900
86146550
86143560
86138690
86144920
86138780
86138810
86145110
86143580
PRV NO.
5486WI
5008BLU
5143
5007BLU
5727UL
5258UL
0102
2494
5101
5178
5728
5717
5203ER
5205
5102BLU
5103
5051HG
5059OR
5053
5819HG
2010
2014
5287BLU
5290WI
5230HG
5155HG
5172OR
5303
5304
5154HG
0100
0176
5174HG
5060ER
5413HG
5414HG
5400-2
5401
5402
0197
5321UL
05117S
05135ST
5469
5100
5462
5129
5107
5112SW
5740ER
0107
0143
5173SW
5465
0104
5463
5110
5767HG
0103ER
0141
5018UL
5239BLU
5244HG
5288BLU
5290WI
5246
5117
DESCRIPTION
POWER HEAD COVER XP 15
EXHAUST FILTER CATCH
EXHAUST FILTER
EXHAUST FILTER COVER
SWIVEL NECK ASSEMBLY
MALE CONTACT HOLDER
SCREW M3,9x13 MM DIN 7981
CABLE CLAMP
SLEEVE
SWIVEL NECK SUPPORT R. H.
SWIVEL NECK SUPPORT L. H.
SWIVEL NECK BEARING
12V POWER SUPPLY 120V 3WIRE
RIBBON CABLE
BRUSH ROLLER RELEASE
SPRING
AXLE ASSEMBLY GRY
FOOT PEDAL, ORAGNS
AXLE
WHEEL GRAY
WHEE RETURN SPRING
CLAMP CONNECTING ROD (AXLE)
BEARING BLOCK RIGHT HAND
BRUSH ROLLER SET SR15
BUMPER SR15 GRY
RUBBING PLATE GRY
ACCESS DOOR ORANGE
AXLE, ACCESS DOOR
SPRING, ACCESS DOOR
HINGE, GRY
SCREW 2.9x9.5
SCREW M4 x 30
PILE ADJUSTMENT WHEEL GRY
SERVO MOTOR WITH GEAR BOX
BOTTOM PLATE
BOTTOM PLATE SR15
SEALING STRIP, 15’
WIRE TIE, BOTTOM PLATE, OUTER
WIRE TIE, BOTTOM PLACE, CENTER
SCR, M4X12 MM W/WASHER
CHASSIS SR15 GRAY
CARBON BRUSH SET 100-120v
THERMO SWITCH VAC
MOTOR 1000 W / 120 V
RUBBER MOUNTING
MOTOR PULLEY 2MR
SUPPORT LEVER
SUPPORT SPRING
MOTOR PULLEY COVER
COMPUTER CONTROLLER 115 & 230V
SCREW 2.9 x 13
WASHER 3.2
COVER (SWIVEL NECK)
SENSOR (WITH RED RING)
SCR M3.9 x 25 MM
BELT 2MR-310-6
BELT 219 3M HTDII-6
BEARING BLOCK L.H. CPL.
SCREW C 3,9x16
WASHER, LOCK
MOTOR COVER, GEY
BRUSH COVER RELEASE
SEAL BEARING GREY
BRUSH COVER GRY/BLU
BRUSH, ROLLER SR15
SHAFT EXTENSION
MOTOR PULLEY
NOTES:
IMPORTANT: Card must be filled out COMPLETELY and returned to
receive an additional 90 days on your warranty. You may also register
on line at www.windsorind.com/Windsor Warranty Reg. shtm
INNOVATIVE EQUIPMENT SOLUTIONS
Machine Registration Card
TYPE OF FACILITY (Circle one)
HT (Hotels)
S (Schools)
COMPANY/INSTITUTION
C (Contractors)
O (Other): _________________________________________________________
NAME
LIST MACHINE
PURCHASED FROM
_______________________________
MODEL NUMBER
TITLE
N (Nursing Homes)
__________________________________________
DISTRIBUTOR
_______________________________
SERIAL NUMBER
__________________________________________
CITY
HP (Hospitals)
HOW OFTEN
WILL YOU USE
THIS MACHINE?
D (Daily)
W (Weekly)
M (Monthy)
(Circle one)
_______________________________
ADDRESS
MODEL NUMBER
__________________________________________
DISTRIBUTOR
_______________________________
SERIAL NUMBER
__________________________________________
CITY
D (Daily)
W (Weekly)
M (Monthy)
(Circle one)
__________________________________________
D (Daily)
DISTRIBUTOR
W (Weekly)
_______________________________
MODEL NUMBER
_______________________________
CITY
STATE
ZIP
SERIAL NUMBER
__________________________________________
CITY
(Circle one)
_______________________________
MODEL NUMBER
PHONE
FAX
SERIAL NUMBER
@
DATE OF PURCHASE
EMAIL
A member of
Art.-No.06113, 08/2007
__________________________________________
CITY
D (Daily)
W (Weekly)
M (Monthy)
(Circle one)
Windsor Distributor, complete the following:
Sales Rep Name ________________________________________________________
Phone Number
Windsor
__________________________________________
DISTRIBUTOR
_______________________________
_______________________________ __________________________________________
M (Monthy)
1351 W. Stanford Ave.
Englewood, CO 80110 USA
(303)-762-1800
________________________________________________________
800-444-7654
FAX (303)-865-2794
8.627-016.0
PRV NO. 98823
NO POSTAGE
NECESSARY
IF MAILED
IN THE
UNITED STATES
BUSINESS REPLY MAIL
FIRST CLASS MAIL
PERMIT NO. 1185
ENGLEWOOD, CO
POSTAGE WILL BE PAID BY ADDRESSEE
Windsor
1351 W. Stanford Ave.
Englewood, CO 80110-9920
86269790-D 04/2010
06636 04/2010
Download PDF