Process Control Instrumentation Product

Process Control Instrumentation Product
Process Control Instrumentation
Product
Effective 01/01/16
2
TABLE OF CONTENTS
Important Information When Placing An Order
3
Cooling Tower Controllers
MicroVision EX Series Controllers
MicroVision Series Controllers
MicroTrac Series Controllers
4
5
6
Boiler Controllers
MicroVision Boiler Series Controllers
7
Timers
MicroVision Series Timer
8
Accessories
Flow Controllers
Bowl Strainer
Portable Testers for Conductivity
Calibration Solutions
Digital Glycol Feeders
Corrosion Coupon Racks
Coupons
Contacting Head Water Meters
Cooling Tower Applications—Valves - Solenoid & Motorized Ball Valves
Boiler Applications—Valves - Motorized Ball Valves & Valve Packages
Flow Control Valves
Sample Cooler
Bleed-Off Piping
Sample Stream Parts
9
9
9
9
10
11
11
12
13
14
14
15
15
15
Parts
ACT / ABC
PULSAtrol
Flow Assembly Diagrams
16
17-18
19-21
Policies and Procedures
Terms and Conditions
22-23
24-25
We reserve the right to update the information contained in this catalog without notice.
3
IMPORTANT INFORMATION
WHEN PLACING AN ORDER
1. Fax, mail or telephone orders directly to the Customer Service Department:
Pulsafeeder Incorporated—A Unit of IDEX Corporation
Standard Product Operations Main Office & Manufacturing Facility
27101 Airport Road, Punta Gorda, Florida, USA 33982-2462 E-Mail: [email protected]
Telephone: 800-333-6677 or 941-575-3800 Fax: 800-456-4085 or 941-575-4085
www.pulsatron.com
2. Please have the following information available when placing an order:
Account Name
Special Tags or Marks (if needed)
Billing Zip Code
Item(s) Being Ordered
Purchase Order Number
Quantity of Each Item
Ship To Address
Pricing
Payment Terms
Shipping Information
3. Orders are entered upon receipt. Our ability to change in house orders is limited. Please be certain your orders are complete
when placed. Any order cancellation or change request is subject to a cancelation fee.
4. Orders are assigned standard lead times based on the size of the order and product mix.
Orders requiring expedited shipping (sooner than the standard lead times) are subject to a expedite charge.
Unless the order clearly requests expedited shipping, the order will be treated as a routine order. When expedited shipping is
requested a designated carrier must be selected. Orders that need to ship the same day must be received by 2:00 PM EST.
Same day and next working day shipping is generally available for larger orders but not guaranteed, please verify with customer
service. Pulsafeeder shall have no liability if it is unable to provide expedited shipping of an order.
5. Repairs and returns are coordinated through our Customer Service Department. All orders returned must have factory
authorization and are subject to a 25% restocking charge for standard product
6.
Other Locations:
PULSAFEEDER-Europe
Via Kennedy, 12-20090
Segrate—Milano– Italy
Tel: +0039 377 706 6300
Latin America (Office Only)
Mario Pani 400, Piso 1, Oficina 111
Col. Lomas de Santa Fe, Cuajimalpa de Morelos
C.P 05300, México, D.F.
Tel: 52-55-4738-4124












Far East (Office Only)
Room 3502-3504, Zhao Feng Plaza
No. 1027 Changning Rd
Shanghai 200050, China
Tel:
86-2163906367
Fax:
86-2163863338
IDEX India Private Ltd.
S14, First Floor
Solitaire Corporate Park,
167, Guru Hargovindji Marg, Chakala
Andheri (East)
Mumbai 400 093, India
Tel: 91-22-66435500
Fax: 91-22-66780055
Prices are subject to change without notice and are effective when order is accepted and acknowledged at point of shipment.
When ordering, specify your P.O. number, model number, quantity, price, shipping and/or billing address and order date.
Standard terms are NET 30 days from date of invoice for approved domestic accounts on open account and NET 60 days from
date of invoice for approved international accounts.
WE ACCEPT VISA AND MASTERCARD.
PAYMENT BY CREDIT CARD WILL NOT RECEIVE AN ADDITIONAL DISCOUNT.
All prices are FCA, Shippers Dock, Punta Gorda, FL.
Custom product sales are final.
Charges for export documentation may apply an very by requirements.
Expedite fees may apply. Orders requiring expedited shipping (sooner than the standard lead times) are subject to an expedite
charge
Fees for changes to or cancellation of orders may apply.
Minimum factory order of $30.
Possession of price schedule does not guarantee right to purchase direct from factory.
We reserve the right to update the information contained in this catalog without notice.
4
Cooling Tower Controllers
MicroVisionEX Series
EX
MicroVision
is a microprocessor-based conductivity, pH and ORP
controller, with the features and functions you need for accurate
monitoring and control of cooling tower water that won’t break your
budget!
Features











Toroidal conductivity sensor.
One-point calibration.
Large easy to read color display.
Lockable front cover.
Multiple level security codes.
Up to 10 digital inputs.
Optional 4-20 mA analog outputs.
Dry contact alarm output.
Battery backup.
USB data logging is standard:
 Up to 2 years of data logging.
 Upload/Download program settings.
 Upgrades to the Operating System.
Optional Ethernet interface.
Programmable
Timers
Flow Switch
Model #
Control Parameters
MVECXXXPX-XXX-XXX
Conductivity control
3
No
MVECXXXPF-XXX-XXX
Conductivity control
3
Yes
MVECXXXPA-XXX-XXX
Conductivity control
3
Yes
MVECXXXPD-XXX-XXX
Conductivity control
3
Yes
MVEC5XXPF-XXX-XXX
Conductivity control
4
Yes
MVEC5XXPA-XXX-XXX
Conductivity control
4
Yes
MVECPXXPF-XXX-XXX
Conductivity and pH
6
Yes
MVECPXXPA-XXX-XXX
Conductivity and pH
6
Yes
MVECPXXPD-XXX-XXX
Conductivity and pH
6
Yes
MVECOXXPF-XXX-XXX
Conductivity and ORP
6
Yes
MVECOXXPA-XXX-XXX
Conductivity and ORP
6
Yes
MVECOXXPD-XXX-XXX
Conductivity and ORP
6
Yes
MVECPOXPF-XXX-XXX
Cond.,pH and ORP
5
Yes
MVECPOXPA-XXX-XXX
Cond.,pH and ORP
5
Yes
MVECPOXPD-XXX-XXX
Cond.,pH and ORP
5
Yes
Note: For CE approved and non-prewired models change the end of the code from "-XXX" to "-CZXXX"
Programmable Timer Modes:
• Pulse
• Percent
• Percent Post Bleed
• Limit
• 28 Day –Biocide
• Alarm Relay
MicroVision EX Parts
Part No.
12-600-00
16-170-07
16-170-08
04-000-21-1
04-060-00
04-060-01
Description
Acc kit, Fuse, relay name lables, IOM
Probe Tee
Flow Assembly, Cond, Flow
Toroidal probe
pH probe
ORP probe
MicroVision EX Accessories and Expansions
Part No.
UGK-MILOUT
Description
4-20mA output - Upgrade kit (1)
Panel Mounted
No
No
Yes
Yes
No
Yes
No
Yes
Yes
No
Yes
Yes
No
Yes
Yes
Pump Mounts
0
0
0
1 to 3
0
0
0
0
1 to 3
0
0
1 to 3
0
0
1 to 3
Digital Inputs
5
5
5
5
5
5
10
10
10
10
10
10
10
10
10
USB
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
Digital Input Assignments
• #1 Flow Sswitch
• #2 to 4 Drum Levels
• #5 Water Meter – Hall Effect or Dry Contact
• #6 & 7 Water Meter – Dry Contact
• #8, 9 & 10 Water Meter–Hall Effect or Dry Contact
5
Cooling Tower Controllers
MicroVision Series
The MicroVision controller series features is innovative Toroidal sensor
technology. Toroidal sensors are not susceptible to fouling and eliminate
the need for routine cleaning and calibration.
The MicroVision is designed specifically for cooling tower applications.
The MicroVision is a microprocessor-based conductivity controller with
selectable timer and dual biocide control.
The MicroVision controller comes standard with selectable timer, Dry
contact/Hall Effect water meter input, dual biocide with pre-bleed, lockout,
inhibitor interface, and four programmable start times per biocide, 4-20mA
output, dry contact alarm output and 3 drum level inputs.
The base unit comes with the controller, toroidal sensor with signal cable,
and a power cord. Pre-wired pigtails on the relays, and a pre-wired flow
switch are available to make installation quick and easy. A 15' signal cable
is standard, up to 100’ optional, on models without a flow switch, and a 3'
cable is standard on models with a flow switch.
MicroVision Selection Guide
MVS
_
_
_
-
PRODUCT
DESIGNATOR
Position 1, 2 & 3
MVS
= MicroVision Toroidal Conductivity Cooling Tower Controller
VOLTAGE
Position 4
1
2
= 115 volt
= 230 volt
POWER WIRING
Position 5
X
P
= Liquid Tight connections (required for CE input power cord options below)
= Prewired power cord and relays (115 VAC Only)
PANELS
Position 6
X
F
A
B
C
D
=
=
=
=
=
=
No Panel and No Flow assembly
Flow assembly, No Panel
Standard Panel & Flow Assembly
Panel & Flow Assy, 1 Pump Mount, strainer, sensor tee, inj tee & rails
Panel & Flow Assy, 2 Pump Mount, strainer, sensor tee, 2 inj tees & rails
Panel & Flow Assy, 3 Pump Mount, strainer, sensor tee, 3 inj tees & rails
SUFFIX CODE
Position 7, 8 & 9
XXX
750
PC025
PC050
PC075
PC100
CZ_XXX
=
=
=
=
=
=
=
Suffix Code
3/4" Back Flow Check Valve
25 Feet (7.6m) of Probe and Flow Switch wiring
50 Feet (15.2m) of Probe and Flow Switch wiring
75 Feet (22.8m) of Probe and Flow Switch wiring
100 Feet (30.4m) of Probe and Flow Switch wiring
CE Approval w/input power cord and plug (CZXXX=European plug ; CZUKXXX=UK plug; CZSUIXXX=Swiss plug)
MicroVision Parts
Part No.
16-100-33
16-830-66
Description
Probe Tee
Standard Flow Assembly
MicroVision Accessories and Expansions
P art Nu m b er
Descrip tion
CK750
Check Valve Kit
P C025
Cable, Cond, Flow - Extension Kit; 25 ft
P C050
Cable, Cond, Flow - Extension Kit; 50 ft
P C075
Cable, Cond, Flow - Extension Kit; 75 ft
P C100
Cable, Cond, Flow - Extension Kit; 100 ft
_____
6
Cooling Tower Controllers
MICROtrac Series
The MICROtrac controller series features is innovative Toroidal sensor
technology. Toroidal sensors are not susceptible to fouling and eliminate the
need for routine cleaning and calibration.
The MICROtrac measures the conductivity of the cooling tower recirculating
water via a toroidal conductivity sensor. The controller activates two
independent relay outputs based on bleed and a selectable feed mode of
operation.
The MICROtrac controller comes standard with selectable rising or falling
setpoint for open or closed loop control, water meter pulse input, percent timer,
% post bleed timer and limit timer.
The base unit comes with the controller, toroidal sensor with signal cable, and
a power cord. Optional features such as a sensor mounting tee, pre-wired
pigtails on the relays, and a pre-wired flow switch are available to make
installation quick and easy. A 15' signal cable is standard, up to 100’ optional,
on models without a flows witch, and a 3' cable is standard on models with a
flow switch.
MicroTrac Selection Guide
MTC
_
_
_
PRODUCT
DESIGNATOR
Position 1, 2 & 3
MTC
= MicroTrac Toroidal Conductivity Cooling Tower Controller
VOLTAGE
Position 4
1
2
= 115 volt
= 230volt
RELAY & POWER
WIRING
Position 5
X
L
P
= Prewired power cord & Liquid-Tight relay connections
= Liquid-Tight connections only
= Prewired power cord and relays (115 VAC only)
SENSOR TEE
Position 6
X
T
= Standard (no tee)
= Sensor Tee with 3/4" inlet/outlet connections
FLOW SWITCH
Position 7
X
F
L
A
B
=
=
=
=
=
Standard (no flow switch)
Flow Switch with 3' cable
Standard Flow Assembly (no panel)
Standard Panel & Flow Assembly
Deluxe Panel & Flow Assy, 1 Pump Mount, in/out ball valves, strainer, inj tee & rails
SUFFIX CODE
Position 7, 8 & 9
XXX
750
PC025
PC050
PC075
PC100
CZ_XXX
=
=
=
=
=
=
=
Suffix Code
3/4" Back Flow Check Valve
25 Feet (7.6m) of Probe and Flow Switch wiring
50 Feet (15.2m) of Probe and Flow Switch wiring
75 Feet (22.8m) of Probe and Flow Switch wiring
100 Feet (30.4m) of Probe and Flow Switch wiring
CE Approval w/input power cord and plug (CZXXX=European plug ; CZUKXXX=UK plug; CZSUIXXX=Swiss plug)
MicroTrac Parts
Part No.
04-000-21-1
16-100-01
16-100-33
Description
Toroidal sensor
Flow switch
Sensor Tee
_
-
_____
7
Boiler Controllers
MicroVision Boiler Series
The MicroVision Boiler Controller delivers comprehensive boiler water control
with ‘plug & play’ simplicity, at outstanding value. This latest addition to the
MicroVision family of controllers is configured specifically for boiler water control,
and utilizes intuitive software which provides simple set-up, while providing state of
the art maintenance of the water in your boiler. Features of this device include a
reliable temperature compensated conductivity probe, 5 output relays with
selectable timers, scalable 4-20mA output to report conductivity, hall-effect and
pulse water meter inputs and digital drum levels or a flow switch.
MicroVision Boiler Selection Guide
MVBX
PRODUCT
DESIGNATOR
Position 1 thru 4
MVBX
= MicroVision Boiler Controller
REVIEW AND POWER
WIRING
Position 5
P
C
= Prewired with pigtails (115 VAC only)
= Conduit connections (115V or 230V)
ENCLOSURE
OPTIONS
Position 6
H
= Heavy Duty Enclosure
SYSTEM
OPTIONS
X
A
ASSEMBLED
B
Position 7
C
F
= None
= 1/2" Solenoid valve, one 1" orifice union w/4 plates
(Timed Sample) 100 PSI Max.
= 1/2" Motorized ball valve one 1/2" flow throttling valve
(Timed Sample) 250 PSI Max.
= 1/2" Motorized ball valve one 1" orifice union w/4 plates
(Timed Sample) 250 PSI Max.
= 3/4" Motorized ball vlv, one 3/4" throtting vlv, one 1/2" throttling vlv
(Continuous Sample) 250 PSI Max.
= 3/4" Motorized ball valve, two 1" orifice union w/4 plates
(Continuous Sample) 250 PSI Max.
= High Pressure Flow Assembly (250 PSI) for cooling tower appliications
SENSOR
OPTIONS
Position 8
X
S
= No Sensor Provided
= Contact Electrode, 250 PSI Max (210 PSI for steam) 392° F Max
CABLE
LENGTH
Position 9 thru 11
000
010
025
050
075
100
150
= No Cable Supplied
= 10 Feet of sensor cable
= 25 Feet of sensor cable
= 50 Feet of sensor cable
= 75 Feet of sensor cable
= 100 Feet of sensor cable
= 150 Feet of sensor cable
SUFFIX CODES
Position 12 thru 18
XXX
CZ_XXX
= Standard Unit
= CE Approval (CZXXX=Europe; CZUKXXX=UK; CZSUIXXX=Switzerland/Liechtenstein)
D
E
MicroVision Boiler Parts
Part No.
CCBS-MVB
Description
MicroVision Boiler Sensor - No Cross
_
_
_
_
___
-
XXX
8
Programmable Timers
MicroVision Timer
The MicroVision -Timer is a microprocessor-based selectable timer
controlller. Designed specifically for timer based control applications,
MicroVision Timer comes with the features and functions you need for
accurate timer based control.
The MicroVision Timer comes standard with the five programmable
digital inputs that can be programmed as Drum Level inputs, water meter
inputs or a Hall effect input and five programmable timers for 28 day,
pulse, percent, cycle and system alarm.
The base unit comes with the controller and a power cord. Optional
features such as a pre-wired flow switch are available to make
installation quick and easy. A 15' signal cable is standard, up to 100’
optional, on models without a flow switch, and a 3' cable is standard on
models with a flow switch.
MicroVision Timer Selection Guide
MVT
PRODUCT
DESIGNATOR
Position 1, 2 & 3
MVT
= MicroVision Timer Controller
VOLTAGE
Position 4
1
2
= 115 volt
= 230 volt (no prewired power cord or relays available)
POWER WIRING
Position 5
X
P
= Liquid Tite connections only (required for 230VAC)
= Prewired w/Power Cord and Pigtails for 115 VAC
PANELS
Position 6
X
F
A
B
C
D
=
=
=
=
=
=
SUFFIX CODE
Position 7 thru 13
XXX
CZ_XXX
= Suffix Code
= CE Approval (CZXXX=Europe; CZUKXXX=UK; CZSUIXXX=Switzerland/Liechtenstein)
A completed model should look like "MVT1PB-XXX
No Panel and No Flow assembly
Flow assembly, No Panel
Standard Panel & Flow Assembly
Panel & Flow Assy, 1 Pump Mount, strainer, inj tee & rails
Panel & Flow Assy, 2 Pump Mount, strainer, 2 inj tees & rails
Panel & Flow Assy, 3 Pump Mount, strainer, 3 inj tees & rails
_
_
_ -
___
9
Flow Controller
The versatile Flow Controller may be used to establish flow/no- flow control of metering pumps in various applications. Each unit
comes prewired with an eight-foot, three-wire power cord for easy installation. A test switch is also provided for manual circuit tests.
Flow Controllers
Model No.
FC2000
FC2000C
1
2
3
4
Description
Flow Controller - Standard flow controller has 3/4 PVC threaded connections with 3/4"
PVC slip adaptors to use if needed. 1 GPM minimum flow required for activation
Flow Controller - Standard flow controller w/ 1 PVC slip connectors;
1 GPM min. flow required for activation.
Available options for FC2000 & FC2000C:
Receptacle functions (Standard--both on with flow)
Both on with no flow
One on with flow, other on no flow
One on with flow, other service
One on with no flow, other service
Replacement Flow Assemblies
Pump Part Discount Applies on
Flow Controllers
Part No.
16-977-79
16-977-71
Description
3/4 (FC2000)
1 (FC2000C)
Bowl Strainer - Cooling Tower Applications
The polypropylene bowl strainers ensure the controller’s sensors are protected from debris in the sample stream piping. Rated 100
psi at 70OF.
Bowl Strainers
Part Number
12-069-62
12-069-64
12-069-66
Description
3/4" Bowl Strainer (50 MESH)
3/4" Bowl Strainer (80 MESH)
3/4" Bowl Strainer (100 MESH)
Model No.
HJ6BC
HJ7B
Description
0-100, 0-1000, 0-10,000 µS/cm
0-50, 0-500, 0-5,000 µS/cm
Model No.
HJ6BC
Part
HJ7BNo.
Description
Calibration
0-100, 0-1000, 0-10,000
µS/cm
Description
0-50, 0-500, 0-5,000 µS/cm
20-016-26
20-016-28
Part No.
20-016-00
20-016-02
20-016-26
20-016-04
20-016-28
20-016-00
20-016-36
20-016-02
20-016-37
20-016-04
20-016-38
20-016-39
20-016-36
20-016-40
20-016-37
20-016-41
20-016-38
20-016-39
20-016-42
20-016-40
20-016-43
20-016-41
20-016-44
20-016-45
20-016-42
20-016-43
12-043-58
20-016-44
20-016-45
Solutions
2000 conductivity Calibration
(6 pack)
5000
conductivity (6 pack)
Description
500 conductivity (1 bottle)
Conductivity Solutions (500 ml
2000 conductivity (1 bottle)
2000 conductivity (6 pack)
5000 conductivity (1 bottle)
5000 conductivity (6 pack)
pH Kit Solutions
500 conductivity (1 bottle)
pH
4 buffer
solution(1- bottle)
4 oz
2000
conductivity
pH
4 buffer
solution(1- bottle)
32 oz
5000
conductivity
pH 7 buffer solution - 4 oz
pH Kit Solutions
pH 7 buffer solution - 32 oz
pH 4 buffer solution - 4 oz
pH 10 buffer solution - 4 oz
pH 4 buffer solution - 32 oz
pH 10 buffer solution - 32 oz
pH 7 buffer solution - 4 oz
pH 7 buffer solution ORP
- 32 oz Kit Solutions
ORP
mVsolution
buffer solution
pH 10100
buffer
- 4 oz - 4 oz
ORP
mVsolution
buffer solution
pH 10100
buffer
- 32 oz- 32 oz
ORP 465 mV buffer solution - 4 oz
ORP Kit Solutions
ORP 465 mV buffer solution - 32 oz
ORP 100 mV buffer solution - 4 oz
ORP 100 mV bufferCalibration
solution - 32 oz Kit / Tee
Calibration
Kit buffer
/ Tee solution - 4 oz
ORP 465 mV
ORP 465 mV buffer solution - 32 oz
12-043-58
Calibration Kit / Tee
Conductivity Testers
Hand Held Conductivity Testers
Calibration Solutions
Hand Held Conductivity Testers
Solutions
Conductivity Solutions (500 ml bottles)
Calibration Kit / Tee
bottles)
10
Digital Glycol Feeders
Pulsafeeder’s Digital Glycol Feeder provides a consistent operating
pressure in closed loop systems. This allows a controlled percentage of
glycol solution to be fed from the 55 gallon tank. The Digital Glycol Feeder
is available in two models; the DGF1 for single loop and the DGF2 for dual
loop systems. The control unit utilizes an 8-bit microcontroller for precise
feed system control. The NEMA4X enclosure can be wired conduit or
prewire for easy startup. The preplumbed assembly includes a pressure
gauge, pressure switch, and pressure relief valve to prevent excessive
pressure build up. A low liquid level switch with optional audible alarm
prevents the gear pump from operating when the solution is low.
Controller Discount Applies
on Digital Glycol Feeder
DIGITAL GLYCOL FEEDER Selection Guide
CLOSED LOOPS
Position 4
1 = Single Loop
2 = Dual Loop
CONDUIT / PREWIRE
Position 5
A = Conduit
B = Prewire
AUDIBLE ALARM
Position 6
A = without Audible Alarm
B = with Audible Alarm
ALARM OUTPUT
OPTION
Position 7
X
A
B
C
D
E
PRESSURE
SWITCH OPTION
Position 8
A = Standard pressure switch, 30 to 50 psi (adjustable to 80 psi)
B = Low pressure switch, 5 to 10 psi (adjustable to 35 psi)
C = One standard and one low pressure switch (DGF2 only)
PUMP AND
VOLTAGE RATING
Position 9
A = 115VAC no pump
C = 115VAC 60Hz 1.50GPM @ 100psi
E = 115VAC 60Hz 3.75GPM @ 100 psi
AGENCY APPROVAL
Position 10
X = None
PANEL ASSEMBLY
Position 11
B = Assembled (must ship via freight)
=
=
=
=
=
=
None
Dry Contact, Single
Dry Contact, Dual
AC Output, Single
AC Output, Dual
Dry Contact, Single & AC Output, Single
Accessories
Digital Glycol Feeder for Closed Loop Systems
Replacement Pumps
Part No.
18-600-35
18-600-42
Description
115V 60Hz 1.50GPM @ 100PSI
115V 60Hz 3.75GPM @ 100PSI
16-171-81-9
Wand, level, adjustable up to 34
16-171-81-3
Cable, extension, 10' with connectors
05-052-18
Fuse, 16A, 250V, 5X20MM
12-140-00
12-140-01
Standard pressure switch 30 - 50psi (adjustable to 80 psi)
Low pressure switch to 5 - 10psi (adjustable to 35 psi)
12-130-01
12-130-03
Standard pressure gauge 0-100psi, liquid filled
Low pressure gauge 0-30psi, liquid filled
Replacement Wand
Cables
Replacement Fuse
Pressure Switches
Pressure Gauge
DGF_
_
_
_
_
_
_
_
11
Corrosion Coupon Racks
Our Corrosion Coupon Racks are hydrostatically tested for
maximum system performance exceeding industry standards.
These simple and reliable coupon test stations are typically
installed on the side stream of re-circulating systems to allow for
controlled testing of coupon samples. Samples are periodically
removed and examined by a laboratory in order to calculate
corrosion rates and other effects such as pitting and deposition.
Corrosion Coupon Racks
M od el Nu m b er
S tation s
M ou n t
CCR2
2 Station
.50" HPDE
CCR20DF 5
2 Station
CCR20DX 7X 8CF 5
2 Station
.25 " HDPE
.25 " HDPE
Piping
3/4" PVC
3/4" black iron
3/4" black iron
CCR20DX S X 7
2 Station
CCR20X 1X 4X 7
2 Station
.25 " HDPE
.25 " HDPE
3/4" black iron w/ SS Holder rod
3/4" PVC
CCR20X 1X 7F 5
2 Station
.25 " HDPE
3/4" PVC
CCR2D
2 Station
.50" HPDE
CCR2X 1X 4X 8A
2 Station
.25 " HDPE
3/4" black iron
3/4" PVC
CCR40DX S X 7
4 Station
CCR40X 1X 4X 7
4 Station
.25 " HDPE
.25 " HDPE
3/4" black iron w/ SS Holder rod
3/4" PVC
CCR40X 1X 7F 5
4 Station
.25 " HDPE
3/4" PVC
CCR4DX 7X 8C
4 Station
.50 " HDPE
3/4" black iron
Descrip tion
3/4" PVC inlet ball valve
Flow control valve 5 GPM (3/4" only)
3/4" brass gate valve 250 psi; Y strainer for 3/4" PVC;
Flow control valve 5 GPM (3/4" only)
3/4" brass gate valve 250 psi
Quick release coupon holders (PVC only); PVC outlet ball valve
3/4" hot/cold water flow meter, Max. 100 psi (7 bar) @ 130ºF (54ºC).
Quick release coupon holders (PVC only); PVC outlet ball valve
Flow control valve 5 GPM (3/4" only)
Quick release coupon holders (PVC only); Y Strainer for 3/4" PVC
3/4" hot/cold water flow meter, Max. 100 psi (7 bar) @ 130ºF (54ºC).
3/4" brass gate valve 250 psi
Quick release coupon holders (PVC only); PVC outlet ball valve
3/4" hot/cold water flow meter, Max. 100 psi (7 bar) @ 130ºF (54ºC).
Quick release coupon holders (PVC only); Flow control valve 5 GPM (3/4" only)
PVC outlet ball valve
3/4" brass gate valve 250 psi; Y Strainer for 3/4" black iron
Coupon Rack Replacement Parts
P art Nu m b er
Descrip tion
16- 756- 51- 1
Quick Release coupon holder with hardware
16- 756- 50
PVC and CPVC holder with hardware
16- 756- 42
Steel on black iron holder with hardware
33- 022- 16
3/4" hot/cold water flow meter
Coupon Rack Accessories
Coupons for Corrosion Coupon Racks & Deposit Monitors
Coupon Rack Replacement Parts
P art Nu m b er
Descrip tion
03- 220- 10
Mild Steel
P art Nu m b er
Descrip tion
03- 220- 00
Copper
16- 756- 51- 1
Quick Release coupon holder with hardware
03- 220- 60
303 Stainless Steel
16- 756- 50
PVC and CPVC holder with hardware
03- 220- 70
304 Stainless Steel
16- 756- 42
Steel on black iron holder with hardware
03- 220- 20
316 Stainless Steel
33- 022- 16
3/4" hot/cold water flow meter
03- 220- 50
Nickel
03- 221- 30
Brass
03- 221- 40
Bronze
P art Nu m b er
Descrip tion
03- 221- 50
Aluminum
03- 220- 10
Mild Steel
03- 220- 00
Copper
03- 220- 60
303 Stainless Steel
03- 220- 70
304 Stainless Steel
03- 220- 20
316 Stainless Steel
03- 220- 50
Nickel
03- 221- 30
Brass
03- 221- 40
Bronze
03- 221- 50
Aluminum
Coupons for Corrosion Coupon Racks & Deposit Monitors
12
Water Meters - Contacting Head Water Meters
Multi-Jet Meters:
3/4 in. to 2 in., are designed for use in conjunction with a pulse timer to
proportionally control pumps, valves etc. Typical applications include
water treatment in cooling tower and boiler systems, water chlorination,
car washes and other industrial processes which require proportional
control. The Multi-Jet chamber of the water meter assures accuracy over
a wide range of flows with low head loss. To prevent wear and maintain
accuracy the load is equally distributed on the impeller.
Lead Free
Contacting Water Meter
Turbine Meters:
Contacting
Water Meter
3 inch to 6 inch operate continuously with exceptional accuracy. Each
meter incorporates a highly efficient horizontal turbine that essentially
floats on the water. The turbine is attached to a Tungsten steel shaft
riding in Jewel bearings. The rotation of the turbine is transmitted through
a magnetic drive to a sealed odometer register.
Lead Free Brass Contacting Water Meters - Cold Water
Code
1=
3=
4=
5=
Select Water
Meter Size
Code
00 =
01 =
02 =
03 =
04 =
07 =
Rating
Less Reed
0.1 GPC
0.25 GPC
0.5 GPC
1 GPC
10 GPC
Rating
.625" x .75"
1" NPT
1.5" NPT
2" NPT
Reference
.25 - 20 GPM
.75 - 50 GPM
1.5 - 100 GPM
2 - 160 GPM
Gallons Per Contact (GPC)
3/4" x 5/8"
1"
1.5"
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
MTR _
_ _ -G
2"
X
X
Lead Free
3/4" - 2" Meters have male Epoxy Coated NPT Brass Bodies with unions, rated for 150 PSI max, 105 O F max.
Brass Contacting Water Meters - Cold Water
Code
2=
3=
4=
5=
Select Water
Meter Size
Code
00 =
01 =
03 =
04 =
06 =
07 =
Standard Brass
Rating
Less Reed
0.1 GPC
0.5 GPC
1 GPC
5 GPC
10 GPC
Rating
.75" NPT
1" NPT
1.5" NPT
2" NPT
Reference
.5 - 30 GPM
.75 - 50 GPM
1.5 - 100 GPM
2 - 160 GPM
Gallons Per Contact (GPC)
3/4"
1"
1.5"
X
X
X
X
X
X
X
MTR _
_ _ -A
2"
X
X
X
3/4" - 2" Meters have male Epoxy Coated NPT Brass Bodies with unions, rated for 150 PSI max, 105 O F max.
Turbine Contacting Water Meters - Cold Water
Code
Select Water
Meter Size
Rating
6 = 3" Flanged
7 = 4" Flanged
8 = 6" Flanged
Code
Ratings
10 =
13 =
100 GPC
1,000 GPC
Reference
440 GPM
660 GPM
1650 GPM
MTR _
__
Gallons Per Contact (GPC)
3"
4"
6"
X
X
X
X
X
X
3", 4" & 6" Meters have Epoxy Coated Ductile Iron Flanged Bodies, rated for 200 PSI max, 105 O F max.
Water Meters get a
pump accessory
discount
13
Solenoid Valves - Cooling Tower Applications
Standard Solenoid Valves
Part Number
12-072-62
12-072-53
12-072-54
12-072-55
12-072-56
Standard Solenoid Valve
12-072-57
12-072-58
12-072-59
Description
2 Way N/C 1/4" Stainless Steel Body with tefon Seat. 150 psi MOPD at 160 O F.
120/60, 110/50 volt - ASCO vlv
2 Way N/C 1/2" NPT Brass Body. 0 psi min - 150 psi MOPD at 180 O F.
120/60, 110/50 volt - ASCO vlv
2 Way N/C 3/4" NPT Brass Body. 0 psi min - 150 psi MOPD at 180 O F.
120/60, 110/50 volt - ASCO vlv
2 Way N/C 1" NPT Brass Body. 0 psi min - 150 psi MOPD at 180 O F.
120/60 volt - ASCO vlv
2 Way N/C 1" NPT Brass Body. 5 psi min - 150 psi MOPD at 180 O F.
120/60, 110/50 volt - ASCO vlv
2 Way N/C 1 1/2" NPT Brass Body. 0 psi min - 150 psi MOPD at 180 O F.
120/60 volt - ASCO vlv
2 Way N/C 1 1/2" NPT Brass Body. 5 psi min - 150 psi MOPD at 180 O F.
120/60 volt - ASCO vlv
2 Way N/C 2" NPT Brass Body. 5 psi min - 150 psi MOPD at 180 O F.
120/60 volt - ASCO vlv
High Temp Solenoid Valves
12-072-60
12-072-61
High Temp Solenoid Valve
2 Way N/C 1/2" NPT Brass Body. 1 psi min - 125 psi MOPD at 353 O F.
120/60 volt - ASCO vlv
2 Way N/C 3/4" NPT Brass Body. 2 psi min - 125 psi MOPD at 353 O F.
120/60, 110/50 volt - ASCO vlv
12-048-00
2 Way N/C 1/2" Brass Body, PTFE. 0 psi differential, 100 psi @ 356 OF. 115 VAC.
12-056-00
2 Way N/C 3/4" Brass Body, PTFE. 0 psi differential, 100 psi @ 356 OF. 115 VAC.
Motorized Ball Valves
EC Series - Motorized Valves
Part Number
EC Series Motorized Valve
12-045-00
12-054-10
12-057-00
Description
Motorized Valves for Cooling Tower Applications
Low differential pressure applications. Brass bodies. Spring return.
1/2" NPT (25 psi maximum)
3/4" NPT (25 psi maximum)
1" NPT (15 psi maximum)
14
Motorized Ball Valves & Valve Packages - Boiler Applications
Materials of construction: Solenoid Valves are bronze body with stainless steel pilot and valves; Motorized Ball Valves are
carbon steel body with 316 stainless steel ball and stem; Throttling Valves are carbon steel body and valve; and Orifice Unions
are carbon steel union with stainless steel plates.
Valve Packages
Part Number
16-896-00
16-896-04
16-896-08
Timed Sample Systems
Description
Up to 100 psi
Package includes 1/2" solenoid valve (12-048-00) and 1" orifice
union with 4 orifice plates (12-012-00 and 12-013-50).
Up to 300 psi
Package includes 1/2" motorized ball valve with heavy duty 90
degree actuator (16-892-00) and 1/2" flow throttling valve (12-046-01).
Up to 450 psi
Package includes 1/2" motorized ball valve with 360 degree actuator
(16-892-02) and 1" orifice union with 4 orifice plates (12-012-00 and 12-013-50).
Valve Packages
Throttling Valve
Continuous Sample Systems
16-896-02
16-896-06
16-896-10
Up to 100 psi
Package includes 3/4" solenoid valve (12-056-00) and two 1" orifice
unions with 4 orifice plates each (12-012-00 and 12-013-50).
Up to 300 psi
Package includes 3/4 motorized ball valve with 90 degree actuator
(16-892-01), 3/4 flow throttling valve (12-055-01), and 1/2" flow throttling
valve (12-046-01).
Up to 425 psi
Package includes 3/4" motorized ball valve with 360 degree actuator (16-892-04)
and two 1" orifice unions with 4 orifice plates each (12-012-00 and 12-013-50).
Available option:
-2
230 VAC service
Note: Materials of construction: Solenoid Valves are bronze body with stainless steel pilot and
valves; Motorized Ball Valves are carbon steel body with 316 stainless steel ball and stem;
Throttling Valves are carbon steel body and valve; and Orfice Unions are carbon steel union with
stainless steel plates.
Motorized Ball Valves
Motorized Ball Valve
Part Number
16-892-00
16-892-01
16-892-02
16-892-04
Available
option:
Part
Number
-2
16-892-00
Part Number
16-892-01
12-040-00
16-892-02
12-040-10
16-892-04
Description
1/2" motorized ball valve (10-75 Worcester Actuator)
3/4" motorized ball valve (10-75 Worcester Actuator)
1/2" motorized ball valve (10-36 Worcester Actuator)
3/4" motorized ball
valve (10-36 Worcester
Actuator)
Motorized
Ball Valves
Description
230 motorized
VAC service
1/2"
ball valve (10-75 Worcester Actuator)
Description
3/4" motorized ball valve (10-75 Worcester Actuator)
Worcester
10-75
only Worcester Actuator)
1/2"
motorized
ballactuator
valve (10-36
Worcester
10-36
only Worcester Actuator)
3/4"
motorized
ballactuator
valve (10-36
Available option:
-2
Part
Part Number
Number
12-040-00
12-043-00
12-040-10
12-051-00
230 VAC service
Motorized Ball Valve
Description
Description
Worcester
actuator
Worcester 10-75
1/2" steam
ratedonly
ball valve only
Worcester
actuator
Worcester 10-36
3/4" steam
ratedonly
ball valve only
12-049-00
Mounting kit for 12-051-00 & 12-040-00
Parts
Motorized Ball Valve Parts
Part Number
Description
Flow Control Valves
12-043-00
Worcester
1/2" steam rated ball valve only
Part
Number
Description
Flow control valves maintain sufficient back pressure
in boiler blowdown
lines
in rated
order
prevent
12-051-00
Worcester
balltovalve
only flashing and to ensure
12-075-01
3/8" valve 3/4"
(300steam
psi maximum)
adequate blowdown rates. The orifice union includes
four plates, Mounting
1/16” , kit
1/8”,
¼” and& 12-040-00
a 5/16”. Flow control valves include an
12-049-00
for
12-051-00
12-046-01
1/2" valve (300 psi maximum)
Flow Control Valves - Boiler Applications
indexed position indictor.
Flow Control Valves
Orifice
Union
Orifice Plates
12-055-01
3/4" valve (300 psi maximum)
Part Number
12-075-01
Part Number
12-046-01
12-012-00-1
12-055-01
12-013-50
Description
Orifice Unions & Orifice
3/8"
valve (300 psi maximum)
Description
1/2"
valveunion
(300with
psi maximum)
1" orifice
set of (4) orifice plates
3/4"
maximum)
Set ofvalve
four (300
orificepsi
plates
Part
Part Number
Number
12-012-00-1
12-013-50
16-900-18
Description
Description
1" orifice union
with set
of (4)
orifice plates
Includes
SVC
solenoid
valve, steel Y-strainer, and brass shutoff valve.
Set
3/4"of four orifice plates
16-900-12
1"
Flow Control Valves
Plates
Orifice
Unions
& Orifice
Plates
Bleed-off
Piping
Assembly
Bleed-off Piping Assembly
Sample Cooler
16-892-02
16-892-04
Available option:
-2
Part Number
12-040-00
12-040-10
1/2" motorized ball valve (10-36 Worcester Actuator)
3/4" motorized ball valve (10-36 Worcester Actuator)
230 VAC service
Description
Worcester 10-75 actuator only
Worcester 10-36 actuator only
Motorized water
Ball Valve
Parts steam lines or tanks
Pulsafeeder’s Sample Cooler part number 12-066-00 is a safe method of withdrawing
from boilers,
containing chemicals and for cooling the withdrawnPart
liquid
for subsequent
Number
Descriptionchemical analysis.
12-043-00
12-051-00
12-049-00
Part Number
12-066-00
Worcester 1/2" steam rated ball valve only
Worcester 3/4" steam rated ball valve only
Sample Coolers
Mounting kit for 12-051-00 & 12-040-00
Description
Sample Cooler
Part Number
12-075-01
12-046-01
12-055-01
Description
3/8" valve (300 psi maximum)
1/2" valve (300 psi maximum)
3/4" valve (300 psi maximum)
Flow Control Valves
Bleed-Off Piping Assembly - Cooling TowerOrifice
Applications
Unions & Orifice Plates
The pre-plumbed bleed-off assemblies make installation
of a cooling
tower bleed valve easy. The assemblies include a solenoid
Part Number
Description
valve, Y strainer and a brass shutoff valve.
12-012-00-1
1" orifice union with set of (4) orifice plates
12-013-50
Set of four orifice plates
Part Number
Description
Includes SVC solenoid valve, steel Y-strainer, and brass shutoff valve.
3/4"
1"
Bleed-off Piping Assembly
16-900-18
16-900-12
Sample Steam Parts
Sample Stream Parts
Part Number
12-069-00
12-070-00
12-072-00
16-810-00
16-810-03
16-810-08
04-300-08
Description
3/4" Clear PVC Y-strainer
Replacement mesh for 12-069-00
3/4" PVC ball valve
2 stage injection manifold
3 stage injection manifold
5 stage injection manifold
Sample valve assembly
15
16
ACT / ABC Parts
ACT / ABC Parts (101/102 only)
P art Nu m b er
08- 986- 05
Descrip tion
Power supply board assembly, ET L/CE
ACT Parts (101/102 only)
P art Nu m b er
08- 986- 06
Descrip tion
Limit timer board assembly
ABC Mother Board Panel Assemblies, Complete
P art Nu m b er
15- 920- 28
Descrip tion
Panel assembly ABC102
ACT Flow Assemblies, Complete
P art Nu m b er
16- 596- 20
Descrip tion
Flow assembly, with flow switch conductivity (no sensor)
ACT Flow Assembly Components
P art Nu m b er
03- 093- 00
03- 096- 62- E
04- 300- 08
03- 096- 56- E
03- 096- 52- E
03- 005- 05
03- 005- 04- 2
06- 008- 00- E
03- 096- 71- E
04- 300- 90- 1
04- 300- 91
Descrip tion
Male adaptor, 3/4"
Elbow tee, 3/4"
Sample valve assembly
T ee, sensor
T ee, flow, clear
O-ring, 1 1/2" ID, 1 3/4" OD, 1/16" T hk (tee)
O-ring, 15/16" ID, 1 1/8" OD, 3/32" T hk (sensor/ sensor holder)
Coupling Nut
Pipe Nipple, 3/4" x 3.00 long
Flow Switch
"CE" flow switch
ACT Replacement Sensor
P art Nu m b er
04- 600- 02
Descrip tion
Conductivity; Stainless Steel with 10' cable
ABC Replacement Sensors
P art Nu m b er
04- 750- 14- 1
04- 750- 13- 1
Descrip tion
Conductivity (ABC50) only
In-Line type Max. Press. 250 psi, Max T emp. 400ºF
Conductivity (ABC101/102) only
In-Line type Max. Press. 250 psi, Max T emp. 400ºF w/T emp. Comp.
17
Parts
Daughter Cards
P art Nu m b er
08- 985- 05
08- 985- 50
08- 600- 06
08- 600- 16
08- 600- 08
08- 600- 18
08- 600- 12
08- 600- 13
08- 600- 48
08- 600- 59
Descrip tion
Conductivity card
Isolated pH card
Dual conductivity card
Single conductivity card
Dual pH/ORP card
Single pH card
Dual 4-20mA output card
Single 4-20mA output card
Serial line comm. card w/o 14.4K baud modem
Serial line comm. card w/ 14.4K baud modem
Ap p licab le S eries
100
100
All Series except 100
All Series except 100
All Series except 100
All Series except 100
All Series except 100
200/300/9200
9300/9500/9601
9300/9500/9602
Descrip tion
Mother board, 100 Series
Mother board with 2 line display
Mother board for 2 line display
Mother board with 8 line display
Mother board for 8 line display
Ap p licab le S eries
100
200/9200
200/9200
300/9300/9500/9600
300/9300/9500/9601
Mother Boards
P art Nu m b er
08- 985- 00- E
08- 600- 14- 2
08- 600- 50
08- 600- 15- 2
08- 600- 52
Power Supply / Relay Boards
P art Nu m b er
12- 042- 76
08- 600- 04- 1
08- 600- 04- 2
12- 042- 78
08- 600- 03- 3
08- 600- 65- 3
Descrip tion
Power supply/relay board w/ K option
Relay board w/o dry contact option
Relay board w/o dry contact option
Relay board w/o dry contact option
Relay board w/o dry contact option
Relay board w/o dry contact option
Ap p licab le S eries
100
200
200/9200
300
All Series except 100
400/9300/9500/9600
Kits, Power Supply / Relay Boards
P art Nu m b er
12- 042- 71
12- 042- 77
12- 042- 72
12- 042- 78
12- 042- 83
Descrip tion
Kit, Power supply/relay board complete
Kit, Relay board complete
Kit, power supply board w/ cables to relay board
Kit, Relay board complete
Kit, Relay board complete
Ap p licab le S eries
100
200/9200
200/300/9200
300
9300/9500/9600
Descrip tion
Relay, AC/IO, module, plug-in/screw mounting
Relay, SPDT , 10A, 12VDC coil, mech., plug-in
Ap p licab le S eries
200/300/9200
All Series except 100
Relays
P art Nu m b er
10- 001- 08- E
10- 001- 12
18
Parts
Complete Flow Assemblies
Standard Flow Assemblies
P art Nu m b er
Descrip tion
16- 596- 00
Flow assembly, with flow switch (no sensor)
16- 596- 02
Flow assembly, with flow switch for pH or ORP (no sensor)
16- 596- 08
Flow assembly, with flow switch for pH/ORP/Cond (no sensors)
16- 596- 12
Flow assembly, with flow switch for pH/Cond or ORP/Cond (no sensors)
16- 596- 22
Flow assembly, with flow switch for conductivity (no sensor)
"CE" Flow Assemblies (R1)
P art Nu m b er
Descrip tion
16- 596- 03
Flow assembly, with flow switch for pH or ORP (no sensors)
16- 596- 05
Flow assembly, with flow switch for pH/ORP (no sensors)
16- 596- 13
Flow assembly, with flow switch for pH/Cond or ORP/Cond (no sensors)
16- 596- 23- 1
Flow assembly, with flow switch for conductivity (no sensor)
Series MC9000 Replacement Sensors
P art Nu m b er
Note:
Ap p lication
04- 600- 92- 1
MC9000 Stainless steel electrodes, 12" cable terminated w/DIN plug.
Conductivity
04- 600- 92- 2
MC9000 Stainless steel electrodes, 120" cable terminated w/DIN plug.
Conductivity or Make-up
04- 600- 93- 1
MC9000 CE approved, Stainless steel electrodes, 12" cable terminated w/Liquid T ight.
Conductivity
04- 600- 93- 2
MC9000 CE approved, Stainless steel electrodes, 120" cable terminated w/Liquid T ight.
Conductivity or Make-up
04- 000- 00
MC9000 Epoxy body, dual junction, 42mm extension w/3 ft. cable.
pH
04- 000- 01
MC9000 Epoxy body, dual junction, 42mm extension w/10 ft. cable.
pH
04- 000- 10
MC9000 Epoxy body, platinum band, single junction, 42mm extension w/3 ft. cable.
ORP
04- 000- 11
MC9000 Epoxy body, platinum band, single junction, 42mm extension w/10 ft. cable.
ORP
04- 300- 92
Flow switch, 3/4" with 18" cable terminated with DIN plug.
Flow
04- 300- 94
Flow switch, 3/4" with 120" cable terminated with DIN plug.
Flow
04- 300- 93
Flow switch, CE approved, 3/4" with 18" cable terminated w/Liquid T ight.
Flow
Series MB9000 Replacement Sensors
P art Nu m b er
Note:
Ap p lication
04- 750- 18
MB9000 Series replacement sensor. S. S. electrodes.
Conductivity
04- 048- 00
MB9000 Series replacement sensor. S. S. body, 10' cable.
pH
04- 400- 50
MB9000 Series replacement sensor. Kynar body, 3' cable.
pH, Self Cleaning
MC9500 & MB9600 Accessories
Single Point Level Wands
P art Nu m b er
Descrip tion
16- 171- 81- 2
Adjustable to 26" with 3 ft. cable
16- 171- 81- 1
Adjustable to 42" with 3 ft. cable
16- 171- 81- 4
Adjustable to 60" with 3 ft. cable
Kits, Fuse / Spare Parts
P art Nu m b er
Descrip tion
Ap p licab le S eries
12- 450- 01
Kit, fuses (1A, 125V and 5A, 125V) and jumpers
100
12- 450- 04
Kit, fuses (5A 250V slo-blo) and jumpers
100
12- 042- 62
Kit, fuse, 5A, 125V, rectangular (pkg. of 5)
200/300/9200
12- 042- 62- 1
Kit, fuse, 5A, 250V, round (pkg. of 5)
200/300/9200
12- 450- 00
Kit, fuses (1A, 250V and 5A, 250V) and jumpers
200/300/9200
12- 042- 62- 2
Kit, fuse, 5A, 250V, slo-blo, round (pkg. of 5)
All Series except 100
12- 450- 03
Kit, fuses (1A & 5A, 250V, slo-blo) and jumpers
All Series except 100
19
Flow Assembly Parts
Flow Assembly Diagram
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
Drawing #1
03-005-05
03-005-04-2
06-008-00-E
03-096-69
03-096-71-E
03-096-75
03-093-00
03-096-62-E
04-300-08
03-096-56-E
03-096-52-E
03-169-14
03-107-00
03-096-50-E
03-096-54-E
03-096-64-E
04-300-14
NC980005-000
L9801300-188
06-164-00
U0811415
06-189-00-E
04-300-90-1
20
Flow Assembly Parts
Hi-Pressure Flow Assembly Diagram
1.
2.
3.
4.
5.
6.
7.
8.
9.
03-068-00
03-135-13
03-135-14
03-135-15
03-135-16
03-135-17
03-135-18
03-176-00
12-600-90
Drawing #2
21
Flow Assembly Parts
MicroVision Flow Assembly Diagram
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
04-350-96
03-180-33
16-100-33
03-701-21
03-701-27
12-072-04
03-126-08
NC980005-000
03-104-00
03-188-02
22
Policies and Procedures
1.
2.
3.
4.
Manufacturer’s Equipment Warranty
a.
Pulsafeeder warrants all pumps and controllers of its manufacture to be free of defects in material or workmanship. Liability
under this policy extends for 24 months from the date of shipment. The manufacturer’s liability is limited to repair or
replacement of any failed equipment or part which is proven defective in material or workmanship upon manufacturer’s
examination. This warranty does not include removal or installation costs and in no event shall the manufacturer’s liability
exceed the selling price of such equipment or part.
b.
The manufacturer disclaims all liability for damage to its products through improper installation, maintenance, use or
attempts to operate such products beyond their functional capacity, intentionally or otherwise, or any other unauthorized
repair. The manufacturer is not responsible for consequential or other damages, injuries or expense incurred through the use
of its products.
c.
The above warranty is in lieu of any other warranty, whether expressed or implied. The manufacturer makes no warranty of
fitness or merchantability. No agent of ours is authorized to provide any warranty other than the above.
Pulsafeeder’s Parts and Accessory Warranty
a.
Pulsafeeder, Inc. warrants parts and accessories provided to be free of defects in material or workmanship. Unless
otherwise noted below, liability under this policy extends for 90 days from date of shipment from the factory when sold as
service parts. (Replaceable elastomeric parts (PTFE) are expendable and are not covered by any warranty either expressed
or implied.)
b.
This policy is extended to a full 12 months from the date of installation or 18 months from shipment from the factory
whichever comes first on the following accessories;
Digital Glycol Feeders
Pre-Engineered Systems
Corrosion Coupon Racks
Analog Timers
Water Meters
Flow Controllers
c.
MicroTrac and MicroVision toroidal probes are warranted for 24 months from date of shipment from the factory when
purchased in conjunction with the controller.
All other electrodes/probes and sensors are considered maintenance items and such are warranted for six (6) months from
the date of shipment when purchased in conjunction with the controller.
Any electrodes/probes other than toroidal and sensors purchased as spare parts are warranted for 90 days from date of
shipment.
d.
The manufacturer’s liability is limited to repair or replacement of any failed equipment or part which is proven defective in
material or workmanship upon manufacturer’s examination. This warranty does not include removal or installation costs and
in no event shall the manufacturer’s liability exceed the selling price of such equipment or part.
e.
The manufacturer disclaims all liability for damages to its products through improper installation, maintenance, use or
attempts to operate such products beyond their functional capacity, intentionally or otherwise, or any unauthorized repair.
The manufacturer is not responsible for consequential or other damages, injuries or expense incurred through the use of its
products.
f.
The above warranty is in lieu of any other warranty, whether expressed or implied. The manufacturer makes no warranty of
fitness or merchantability. No agent of ours is authorized to provide any warranty other than the above.
Process for All Returned Goods (Warranty Items)
a.
Please contact our Technical Service Department to request a RMA (Return Material Authorization) number prior to returning
any goods. The following information will be required:
Billing and ship-to address
Model number and serial number
Contact name and phone number
Reason for return
Purchase order (where applicable)
A packing slip will be provided to the shipper and MUST accompany the product being returned. Packages received without
our proper packing list will be refused by the receiver.
b.
All material must be returned freight prepaid.
c.
All material must be properly packaged to prevent damage in shipment.
d.
All products used in a chemical application MUST accompany an MSDS
e.
All products MUST be wiped and flushed clean of any and all chemicals, solvents or buffers and be warranted to be safe for
handling. You will be requested to acknowledge the condition of the product being returned on our packing list. Any product
received that is deemed to be unsafe for handling or without this acknowledgement will be refused by our receiver.
f.
All warranty repairs will follow the 2 year warranty policy and will refer to the original purchase date.
Non-Warranty Return Procedure (Charge Repair)
a.
If you are experiencing a concern with your Pulsafeeder product, first consult the distributor, dealer or Regional Sales
Manager or the operation and maintenance manual for assistance. If service of your non-warranty unit is necessary, you
must request a return material authorization. A RMA form will be issued and must be used as the packing list attached to the
outside of the box. Please send the unit freight prepaid with the RMA number visibly displayed on the outside of the carton.
All products MUST be wiped and flushed clean of any and all chemicals, solvents or buffers and be warranted to be safe for
handling. You will be requested to acknowledge the condition of the product being returned on our packing list. Any product
received that is deemed to be unsafe for handling or without this acknowledgement will be refused by our receiver.
b.
All products used in a chemical application MUST accompany an MSDS
c..
The charges listed in the following table will apply.
Product
Repair Cost
Pumps and Pump Accessories – within 5 years of sale date
Current List Price x .50 x Part Discount Multiplier
Controllers and Controller Accessories within 5 years of sale date
Current List Price x .50 x Part Discount Multiplier
Any item older than 5 years from date of sale
With purchase order, $50 bench fee to evaluate. The $50 bench fee may be applied
towards repair cost of unit or towards a new controller
All Charge Repairs have a 90 day warranty from date of repair.
23
Policies and Procedures continued
5.
Credit for Return of New, Unused Equipment
a.
No equipment will be accepted beyond six months after date of shipment from factory for credit.
b.
Only new, unused and undamaged standard equipment will be accepted for return to stock.
c.
All credits are based on evaluation and acceptance of material as new and unused by Pulsafeeder. You will be requested to
acknowledge the condition of the product being returned on our packing list. Any product received that is deemed to be
unsafe for handling or without this acknowledgement will be refused by our receiver.
d.
A restocking fee of 25% will apply to returned goods. When a PO is provided for a replacement item at the time of the return
request the restocking fee will be 15%. Note: any product mounted on a panel or skid will be charged a 50% re-stocking fee.
e.
A request for a Returned Material Authorization (RMA) number must be made prior to returning product to Pulsafeeder.
f.
All equipment shall be returned with the RMA Packing List form attached to the outside of the box.
g.
If any chemical, solvent or buffer has been introduced into the product it must be wiped and flushed clean of any and all
substances prior to returning to Pulsafeeder.
h.
All material shall be returned freight prepaid.
i.
Private label products or Engineered Panel Mount Systems are not returnable.
6.
Pricing Errors
a.
Pulsafeeder does their very best to avoid errors in billing. You will receive a confirmation of your order within 24 hours of
order entry. If upon review the customer feels there is a discrepancy, they should contact Pulsafeeder Customer Service as
soon as possible to resolve.
b.
Should an invoice be received that the customer believes to have incorrect pricing, they should notify Pulsafeeder Customer
Service to investigate.
Missing Items
a.
If a product is received by the customer with an item missing the customer must notify Pulsafeeder Customer Service within 7
days of receipt of the product by the end user. A replacement item will be sent at no charge as quickly as possible.
b.
If a shipment is received by the customer with a line item missing they must notify Pulsafeeder Customer Service within 7
days of receipt of the product by the end user. If the customer had been billed for that item, a credit will be issued against the
original Sales Order and a new Sales Order will be created for the replacement product.
Damaged Items
a.
Should the customer receive an order that was damaged in transit, the customer must notify the carrier directly to initiate a
claim on the day of delivery.
b.
Should the customer receive a product with damaged components due to improper packaging they should notify Pulsafeeder
Customer Service within 7 days of receipt of product by end user. A replacement item will be sent at no charge as quickly as
possible.
Technical Support Services Available
a.
Pulsafeeder’sSales Support teamavailableall yourand support. The principle mission of this group is to sell and support our
customer base in a timely and effective manner. This includes the ability to provide in-field service training, assistance in start
-up of our products and perform field repair of goods when required.
b.
Scope
Pulsafeeder, Inc. factory Field Service Technicians are available throughout the World for field services on all Pulsafeeder
products. Services include:
i.
Maintenance Training Seminars, including Classroom slide presentations and or Hands-on Training. The seminar
will take approximately four to five hours, and if time permits minor repair and or adjustments may be made to the
customer’s pumps, controllers or accessories.
ii.
Pre-start up inspections and start up testing/calibration of pumps, controllers and accessories.
iii.
Field repairs of pumps controllers and accessories
iv.
Diagnosing and recommending solutions to systems problems.
7.
8.
9.
Fee Schedule
Service Rate (1)
Normal 8 hour day
$125.00 / hour
Overtime (in excess of 8 hrs each day)
$175.00 / hour
Sundays, National Holiday
$225.00 / hour
Travel time to job site and return
$115.00 / hour
Travel expenses (air fare, hotel, car and meals)
Chargeable to customer at cost.
Minimum charge
4 hour labor, plus travel time and expenses
End User Training Seminars
(1)
Normal work day
$1000.00 / day plus expenses (air fare, car rental, hotel and meals at cost)
Sundays, National Holiday
$1800.00 / day plus expenses (air fare, car rental, hotel and meals at cost)
All rates listed in this section are actual hourly and daily rates, not reference rates
24
TERMS & CONDITIONS
1 . AGREEMENT. The contract of sale resulting from Seller’s documentation together with these terms and conditions (“Contract”) constitutes the entire
agreement between the parties hereto, except as modified in writing signed by both the Seller and Purchaser. The Seller is Pulsafeeder, Inc. and the
Purchaser is identified in the Contract. Any terms in a purchase order, irrespective of their materiality, which are either different from or additional to
Seller’s conditions of sale, are objected to and are excluded unless the Seller expressly agrees in writing to such terms. Execution of such forms by
Seller to accommodate Purchaser’s procurement or accounting procedures or to evidence agreed up on change orders shall not be construed as assent
to Purchaser’s terms. Acceptance of the goods shipped shall constitute assent to Seller’s conditions of sale. This Contract shall be binding up on Purchaser and Seller, and on their successors and assigns.
2 . PROPOSAL OR QUOTATION. A proposal shall not become binding up on Seller until it has been executed and returned by Purchaser. An oral quotation shall not be considered an offer: only a written confirmation thereof incorporating Seller’s terms and conditions shall constitute an offer. All quotations are valid for 30 days unless stated different on the written quotation.
3. ORDER PLACEMENT. All orders shall be subject to acknowledgement by Pulsafeeders and shall be subject to Pulsafeeder’s terms and conditions in
effect on the date the order is accepted. No modifications to the terms and conditions referred to or contained in any request for proposal, order, or other
document from a customer shall apply unless negotiated and approved via written documentation with Pulsafeeder SPO. Any order cancellation or
change request is subject to a cancelation / change fee.
The minimum order amount is US$30.00 based on Pulsafeeders list prices in effect at the time the order is received.
All orders must be submitted with correct pricing and shipping information. Orders submitted without correct pricing and shipping information may be
rejected or delayed.
4 . CREDIT. Credit terms of payment must have the approval of Seller’s Credit Department and must be specified in writing on Seller’s invoice or in the
Contract. If Purchaser’s credit is found by Seller to be unsatisfactory . Seller may rescind or terminate this contract. If at any time during the term of this
contract purchaser’s financial responsibility becomes impaired or unsatisfactory to Seller, Seller reserves the right to stop shipment on notification to
Purchaser, project owner and surety with a demand for payment in advance or at time of delivery for future deliveries or to require other security satisfactory to Seller and in the absence thereof, to cancel the unfilled portion of the Contract. Seller will notify Purchaser promptly of its decision to stop shipments and give an advance notice to the extent this is possible. In the absence of credit terms, sales are for cash.
5. PAYMENT. Specific terms of payment for this order shall be set forth on the reverse side of this Contract or identified and appended hereto. Purchaser agrees to make payment at Seller’s location specified in this Contract in lawful money of the United States. Purchaser further agrees to make all payments when due to Seller in accordance with the agreed terms of payment in this Contract without reference to Purchaser’s agreement with or payments
by the owner and with no right of retention.
6 . INTEREST AND COSTS. Purchaser agrees to pay interest at 1.5% per month (to the extent permitted by law) on all delinquent balances if and when
assessed by Seller, and any attorney’s fees or court costs arising out of and made necessary in collection of its obligation to Seller created by this Contract.
7 . TAXES. Any federal, state or local tax assessment, fee, duty or charge hereafter imposed on or measured by the products purchased hereunder shall
be for Purchaser’s account unless Purchaser furnishes Seller an acceptable exemption certificate from such tax, fee, duty or charge prior to shipment.
8 . FORCE MAJEURE. Seller shall make delivery in accordance with the terms of this Contract or within a reasonable time in the absence of any commitment, but Seller shall not be liable for delays or defaults in delivery caused by floods, fires, storms, or other acts of God, by war or act of public enemy
(or civil disturbance), strikes, lock outs, shortages of labor or raw materials and supplies (including fuel) or production facilities, transportation service or
equipment shortages or failures, action of any governmental authority or other conditions beyond Seller’s reasonable control.
9 . CANCELLATION. If Purchaser desires to cancel or change any portion of this Contract, the purchaser must make such request in writing to Seller.
Seller may, in its sole discretion, accept or reject any such request. If accepted, the Purchaser nonetheless must take delivery and make payment to
Seller for all material manufactured and in process of manufacture at time of notice, and all special materials ordered at time of notice and for which
Seller must take delivery , unless otherwise agreed by Seller in writing. All such materials must be removed from Seller’s premises within 30 days after
payment and payment will due at time of notice. Seller also reserves the right to make a cancellation charge in the event of cancellation by the Purchaser
of an order placed in Seller’s shipping schedule and acknowledged by Seller. Any order cancellation is subject to a cancelation fee.
10 . INSPECTION AND TESTING . Seller’s standard specifications and tests apply to all orders. All charges for inspections or tests not regularly furnished are for Purchaser’s account and subject to prior negotiation. All inspections shall be conducted at Seller’s plant, and failure of Purchaser to avail
himself of inspection privileges shall be deemed a waiver of such privileges.
11 . PRICES. Prices are subject to change without notice. Orders based on published prices and accepted for scheduled shipment will be invoiced at
Seller’s applicable price in effect on the scheduled date of shipment, unless otherwise specifically noted on the order acknowledgment. All prices will be
in accordance with applicable government regulations. Orders specifying palletizing or special packaging will involve special charges.
12 . DELAYS. All orders are accepted subject to Seller’s ability to make delivery at the time and in the quantities specified, and Seller shall not be liable
for damages for failure to make partial or complete shipment or for any delay in making shipments. Purchaser shall be liable for any added expenses
incurred by Seller because of Purchaser’s delay in furnishing requested information to Seller, delay resulting from order changes by Purchaser, or delay
in unloading shipments at delivery point.
13 . SHIPMENT. Seller will select method of shipment and routing when transportation charges are for account of Seller. When shipping instructions are
specified by the Purchaser, all costs will be for the account of the Purchaser. The foregoing includes, but is not limited to, carriers charges for notification
prior to delivery, demurrage, delay in unloading, diversion, or reconsignment. All shipments are Free Carrier (FCA) or EX Works( EXW) (Incoterms 2010)
shippers dock Punta Gorda FL.
On all customer arranged freight (will advise) the customer has 48 hours after Pulsafeeder has advised them that the shipment is complete and ready for
shipment to arrange pickup. If the shipment has not left Pulsafeeder within the 48 hour period the customer will be charged 1% of the shipment invoice
value for each 24 hour period that the shipment remains at the Pulsafeeder facility. Pulsafeeder may also place the shipment in a public storage at the
customer’s expense and without liability to Pulsafeeder.
Any expedited order will be subject to a expedite fee.
25
Unless the order clearly requests expedited shipping, the order will be treated as a routine order. When expedited shipping is requested a designated carrier must be selected. Orders that need to ship the same day must be received by 2:00 PM EST. Same day and next working day shipping is generally available for larger orders but not guaranteed, please verify with customer service. Pulsafeeder shall have no liability if it is unable to provide expedited shipping
of an order.
14 . TITLE. Title to products transfers up on shipment from the Pulsafeeder facility according to FCA Shippers Dock or EXW Punta Gorda FL (Incoterms
2010). Purchaser is then responsible for proper protection of product, placement, compliance with all regulations and ordinances, and will indemnify Seller
against all claims for personal injuries or property damage arising from the storage, use or handling of such products.
15 . IN TRANSIT CLAIMS. Claims for damage or shortage in transit must be made against the carrier by the owner of the shipment according to the FCA or
EXW terms of the Contract. Purchaser has the responsibility to inspect shipments before or during unloading to identify any such damage or shortage and
see that appropriate notation is made on the delivery tickets or an inspection report furnished by the local agent of the carrier in order to support a claim.
16 . CLAIMS. Notice of Claims against Seller hereunder for any reason, must be made to Seller in writing promptly after discovery and within any applicable
warranty period. Failure to give such notice to Seller shall constitute a waiver by Purchaser of any right later to assert such a claim.
17 . RETURNS. Returned goods shall be accepted for credit only if in salable condition and only with evidence of Seller’s prior written consent. Seller will
assess charges for freight both ways and any costs necessary to restore such goods to the regular plant inventory . The amount of credit given will depend
further up on the degree of salability of products accepted in opinion of Seller.
18 . PATENTS. Seller agrees to defend, and to protect Purchaser against loss or damage arising out of any legal action for patent infringement in connection with the manufacture of its products sold to Purchaser, provided Seller is notified promptly of any such action with complete information and is given an
opportunity to defend.
19 . WARRANTY : LIMITATION OF LIABILITY. Seller warrants title to each individual product sold under this Contract and further warrants for a period of
twenty four (24 ) months from ship date, but only to the extent and limit of the purchase price paid for such individual product, that such product conforms to
the specifications set forth in the Contract and is free from defects in material and workmanship under normal service and use for which it was designed.
Seller’s sole obligation and Purchaser’s exclusive remedy under this warranty shall be limited to one of the following, as selected by Seller: delivering to
Purchaser a replacement for any product or part thereof determined by Seller to be defective, repairing such product or part, or refunding the purchase
price (or an equitable portion thereof) paid for such product or part by Purchaser. SELLER MAKES NO WARRANTY OF FITNESS OR MERCHANTABILITY, AND NO OTHER WARRANTY, WHETHER EXPRESS OR ARISING BY OPERATION OF LAW, COURSE OF DEALING, USAGE OF TRADE OR
OTHERWISE IMPLIED SHALL EXIST IN CONNECTION WITH SELLER’S PRODUCTS OR ANY SALE OR USE THERE OF. Purchaser must notify Seller
promptly and within the warranty period of any claim under this warranty. Seller’s warranty extends only to the first purchaser of a product from Seller or
Seller’s authorized distributor. All goods not manufactured by Seller are warranted only to the extent of the warranties of the original manufacturer. Seller
disclaims any liability arising from tort, including strict liability , and Seller further disclaims any liability (whether arising under this or any other provision of
this Contract or otherwise) for any costs (including costs of removal or replacement), liabilities, lost profits, loss of good will or any other general, special,
incidental or consequential damages incurred by Purchaser in connection with this Contract or any product purchased there under.
20 . LAW . This order shall be governed by and shall be construed by the law of the State of New York .
21 . GOVERNMENTAL REGULATIONS. Seller warrants that no code, law, regulation or ordinance of the United States, a state or any other governmental
authority or agency or any applicable Executive Order has been violated in the manufacture or sale of the items covered by this Agreement and warrants
that the equipment, supplies, and/or articles covered thereby conform with all such requirements.
22 . NUCLEAR FINANCIAL PROTECTION. Purchaser agrees to procure and maintain, as available to it, nuclear energy liability insurance, in a form of
policy approved by the Nuclear Regulatory Commission, and protection, as available, against liability for nuclear incidents not covered by such insurance
through an indemnity agreement, as provided in Section 170 of the Atomic Energy Act of 1954, as amended, or any succeeding comparable statutory provision, and the regulations there under. Such financial protection shall be effective prior to the time any equipment purchased from us is used or installed at
or in connection with any nuclear facility and shall cover us an insured party . To the extent that such financial protection is not suitable to Purchaser. Purchaser agrees to use its best efforts to cause such financial protection to be obtained by eligible parties. We will cooperate with Purchaser and representatives of the nuclear energy insurance syndicates in complying with all underwriting requirements and with those insurance recommendations which may be
mutually agreed up on. Notwithstanding any representations or warranties made by us elsewhere in these conditions of sale, we shall not be responsible for
any bodily injury or property damage liability or any other public liability for any nuclear incidents, whether or not in respect of or arising in connection with
use or installation of our equipment at any nuclear facility or in connection with any such facility . Purchaser hereby assumes any liability which might otherwise be imposed up on us and agrees to indemnify us and hold harmless from any such liability and costs or expenses in connection therewith.
26
27
PLC001 L15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement