Brother DCP-J100 User`s guide

Basic User’s Guide
DCP-J100
DCP-J105
Version 0
ASA/SAF
If you need to contact Customer Service
Please complete the following information for future
reference:
Model Number: DCP-J100 and DCP-J105
(Circle your model number)
Serial Number: 1
Date of Purchase:
Place of Purchase:
1
The serial number is on the back of the unit. Retain
this User's Guide with your sales receipt as a
permanent record of your purchase, in the event of
theft, fire or warranty service.
Register your product on-line at
http://www.brother.com/registration/
© 2014 Brother Industries, Ltd. All rights reserved.
User's Guides and where do I find them?
Which Guide?
What's in it?
Where is it?
Product Safety Guide
Read this Guide first. Please read the Safety
Instructions before you set up your machine. See
this Guide for trademarks and legal limitations.
Printed / In the box
Quick Setup Guide
Follow the instructions for setting up your machine
and installing the drivers and software for the
operating system and connection type you are
using.
Printed / In the box
Basic User’s Guide
Learn the basic Copy and Scan operations, and how
to replace consumables. See troubleshooting tips.
PDF file / CD-ROM
Advanced User’s Guide
Learn more advanced operations: Copy, printing
reports and performing routine maintenance.
PDF file / CD-ROM
Software and Network
This Guide provides instructions for Scanning,
Printing and other operations that can be performed
by connecting your Brother machine to a computer.
You can also find useful information about using the
Brother ControlCenter utility, using your machine in
a network environment, and frequently used terms.
HTML file/CD-ROM
AirPrint Guide 3
This Guide provides information for using AirPrint to
print from OS X v10.7.x, 10.8.x and your iPhone,
iPod touch, iPad, or other iOS device to your Brother
machine without installing a printer driver.
PDF file / Brother
Google Cloud Print
This Guide provides details on how to use Google
Cloud Print™ services for printing over the Internet.
PDF file / Brother
This Guide provides useful information about
printing from your mobile device and scanning from
your Brother machine to your mobile device when
connected to a Wi-Fi network.
PDF file / Brother
Solutions Center 2
User’s Guide
Guide
1
3
Mobile Print/Scan Guide
for Brother iPrint&Scan 3
1
Network features are not supported by the DCP-J100.
2
Visit us at http://solutions.brother.com/.
3
DCP-J105 only
Solutions Center 2
Solutions Center 2
i
Table of Contents
(Basic User’s Guide)
1
General information
1
Using the documentation .......................................................................................1
Symbols and conventions used in the documentation ....................................1
Accessing Brother Utilities (Windows® 8) .............................................................2
Accessing the Advanced User’s Guide and Software and Network
User’s Guide .......................................................................................................2
Viewing User’s Guides ....................................................................................2
How to access Guides for Advanced Features......................................................4
Accessing Brother Support (Windows®) ................................................................5
Accessing Brother Support (Macintosh) ................................................................5
Control panel overview ..........................................................................................6
Warning LED indications .................................................................................8
LCD display ...........................................................................................................8
LCD Contrast...................................................................................................8
2
Loading paper
9
Loading paper and other print media.....................................................................9
Loading envelopes ........................................................................................12
Unprintable area ............................................................................................14
Paper settings......................................................................................................15
Paper Type ....................................................................................................15
Paper Size .....................................................................................................15
Acceptable paper and other print media..............................................................16
Recommended print media ...........................................................................16
Handling and using print media .....................................................................16
Choosing the right print media.......................................................................18
3
Loading documents
19
How to load documents .......................................................................................19
Using the scanner glass ................................................................................19
Unscannable area .........................................................................................20
4
Making copies
21
How to copy .........................................................................................................21
Stop copying..................................................................................................21
Copy settings .......................................................................................................21
Paper Options................................................................................................22
5
How to print from a computer
23
Printing a document.............................................................................................23
ii
6
How to scan to a computer
24
Before scanning................................................................................................... 24
Scanning a document as a PDF file using ControlCenter4 (Windows®) ............. 24
How to change the machine’s SCAN mode settings for PDF scanning using
ControlCenter4 (Windows®) ............................................................................. 28
How to scan a document as a PDF file using the control panel
(Windows® and Macintosh) .............................................................................. 30
A
Routine maintenance
31
Replacing the ink cartridges ................................................................................ 31
Cleaning and checking the machine.................................................................... 34
Cleaning the scanner glass ........................................................................... 34
Cleaning the print head .................................................................................34
Checking the print quality .............................................................................. 35
Checking the print alignment ......................................................................... 36
Setting the date and time..................................................................................... 37
B
Troubleshooting
38
Identifying your problem ......................................................................................38
Error and maintenance messages....................................................................... 39
Printer jam or paper jam ................................................................................ 44
If you are having difficulty with your machine ...................................................... 52
Machine Information ............................................................................................ 58
Checking the serial number........................................................................... 58
Checking the firmware version ...................................................................... 58
Reset functions.............................................................................................. 58
How to reset the machine.............................................................................. 58
C
Settings and features tables
59
Using the Settings tables ..................................................................................... 59
Menu keys ...........................................................................................................59
Menu table ...........................................................................................................61
Entering Text ....................................................................................................... 70
Entering numbers, letters and symbols ........................................................ 70
Inserting spaces ............................................................................................ 70
Making corrections ........................................................................................70
iii
D
Specifications
71
General ................................................................................................................71
Print media...........................................................................................................73
Copy ....................................................................................................................74
Scanner ...............................................................................................................75
Printer ..................................................................................................................76
Interfaces .............................................................................................................77
Network (DCP-J105)............................................................................................78
Computer requirements .......................................................................................79
Consumable items ...............................................................................................80
E
iv
Index
81
Table of Contents
(Advanced User’s Guide)
The Advanced User’s Guide explains the following features and operations.
You can view the Advanced User’s Guide on the CD-ROM.
1
General setup
Memory Storage
Setting Daylight Saving Time
(MFC models only)
(Not available in South Africa)
Automatic Daylight Saving Time
(MFC models only)
(For South Africa only)
Sleep Mode
Auto Power Off (DCP model)
LCD
Mode Timer (MFC models only)
2
A
Routine maintenance
Cleaning and checking the machine
Packing and shipping the machine
B
Glossary
C
Index
Security features
(MFC models only)
TX Lock
3
Sending a fax
(MFC models only)
Additional sending options
Additional sending operations
4
Receiving a fax
(MFC models only)
Memory Receive (Monochrome only)
Additional receiving operations
5
Dialling and storing numbers
(MFC models only)
Additional dialling operations
Additional ways to store numbers
6
Printing reports
Fax reports (MFC models only)
Reports
7
Making copies
Copy options
v
vi
1
General information
Using the
documentation
1
WARNING
1
Thank you for buying a Brother machine!
Reading the documentation will help you
make the most of your machine.
Symbols and conventions
used in the documentation
The following symbols and conventions are
used throughout the documentation.
Bold
Italics
Courier
New
Bold typeface identifies
specific buttons on the
machine’s control panel, or on
the computer screen.
Italicized typeface
emphasizes an important
point or refers you to a related
topic.
Text in the Courier New font
identifies messages on the
LCD of the machine.
1
WARNING indicates a potentially
hazardous situation which, if not avoided,
could result in death or serious injuries.
CAUTION
1
CAUTION indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injuries.
IMPORTANT
IMPORTANT indicates a potentially
hazardous situation which, if not avoided,
may result in damage to property or loss of
product functionality.
NOTE
Notes tell you how to respond to a situation
that may arise or give tips about how the
operation works with other features.
Electrical Hazard icons alert you to
possible electrical shocks.
1
Chapter 1
Accessing Brother
Utilities (Windows® 8)
If you are using a tablet or PC running
Windows® 8, you can make your selections
either by tapping the screen or by clicking
with your mouse.
After the printer driver is installed,
(Brother Utilities) appears on both the
Start screen and the desktop.
a
Tap or click Brother Utilities from
either the Start screen or the desktop.
1
Accessing the
Advanced User’s
Guide and Software
and Network User’s
Guide
This Basic User’s Guide does not contain all
the information about the machine, such as
how to use the advanced Copy, Printer,
Scanner, and Network features. When you
are ready to learn detailed information about
these operations, you can read the
Advanced User’s Guide and Software and
Network User’s Guide in HTML format that
are on the CD-ROM.
Viewing User’s Guides
(Windows®)
b
Select your machine.
DCP-XXXX (where XXXX is your model
name) from the programs list, and then
choose User’s Guides.
(Windows® 8/Windows Server® 2012
(DCP-J105))
Click
(Brother Utilities), and then click
the drop-down list and select your model
name (if not already selected). Click Support
in the left navigation bar, and then click
User’s Guides.
If you have not installed the software, you can
find the documentation on the CD-ROM by
following these instructions:
2
Choose the function you want to use.
1
1
(Windows® XP/Windows Vista®/Windows® 7/
Windows Server® 2003 (DCP-J105)/
Windows Server® 2008 (DCP-J105)/
Windows Server® 2008 R2 (DCP-J105))
(Start), All Programs, select Brother,
c
1
General information
a
Turn on your PC. Insert the Brother
CD-ROM into your CD-ROM drive.
NOTE
(Macintosh)
a
Turn on your Macintosh. Insert the
Brother CD-ROM into your CD-ROM
drive. The following window will appear.
b
c
Double-click the User’s Guides icon.
d
Click User’s Guides. If the country
screen appears, choose your country.
e
When the list of User’s Guides appears,
choose the Guide you want to read.
If the Brother screen does not appear, go
to Computer or My Computer. (For
Windows® 8/Windows Server® 2012
(DCP-J105): Click
1
(File Explorer)
on the taskbar, and then go to Computer.)
Double-click the CD-ROM icon, and then
double-click start.exe.
b
If the model name screen appears, click
your model name.
c
If the language screen appears, click
your language. The CD-ROM
Top Menu will appear.
d
e
Select your model and language if
needed.
Click User’s Guides.
Click PDF/HTML documents. If the
country screen appears, choose your
country. After the list of User’s Guides
appears, choose the guide you want to
read.
3
1
Chapter 1
How to find Scanning instructions
1
There are several ways you can scan
documents. You can find the instructions as
follows:
 Scan
Click Manuals on your model’s page to
download the documentation.
 ControlCenter
Your machine can be connected to a wireless
network.
 Basic network setup instructions
(See Quick Setup Guide.)
 The wireless access point or router
supports Wi-Fi Protected Setup™ or
AOSS™
(See Quick Setup Guide.)
 More information about network setup
(See Software and Network User’s
Guide.)
1
AirPrint Guide (DCP-J105)
1
This Guide provides information for using
AirPrint to print from OS X v10.7.x, 10.8.x and
your iPhone, iPod touch, iPad, or other iOS
device to your Brother machine without
installing a printer driver.
Google Cloud Print Guide (DCP-J105)
1
This Guide provides details on how to use
Google Cloud Print™ services for printing
over the Internet.
Mobile Print/Scan Guide for Brother
iPrint&Scan (DCP-J105)
This Guide provides useful information about
printing from your mobile device and
scanning from your Brother machine to your
mobile device when connected to a Wi-Fi®
network.
4
1
You can view and download these Guides
from the Brother Solutions Center at:
http://solutions.brother.com/.
Software and Network User’s Guide
How to find Network setup
instructions (DCP-J105)
How to access Guides
for Advanced Features
1
General information
Accessing Brother
Support (Windows®)
You can find all the contacts you will need,
such as web support (Brother Solutions
Center) on the CD-ROM.
 Click Brother Support on the Top Menu.
The following screen will appear:
 To access our website
(http://www.brother.com/), click
Brother Home Page.
 For the latest news and product support
information
(http://solutions.brother.com/), click
Brother Solutions Center.
 To visit our website for original Brother
Supplies
(http://www.brother.com/original/),
click Supplies Information.
 To access the Brother CreativeCenter
(http://www.brother.com/creativecenter/)
for FREE photo projects and printable
downloads, click
Brother CreativeCenter.
1
Accessing Brother
Support (Macintosh)
1
You can find all the contacts you will need,
such as web support (Brother Solutions
Center) on the CD-ROM.
 Double-click the Brother Support icon.
The following screen will appear:
 To register your machine from the Brother
Product Registration Page
(http://www.brother.com/registration/),
click On-Line Registration.
 For the latest news and product support
information
(http://solutions.brother.com/), click
Brother Solutions Center.
 To visit our website for original Brother
Supplies
(http://www.brother.com/original/), click
Supplies Information.
 To return to the top menu, click Back or if
you have finished, click Exit.
5
1
Chapter 1
Control panel overview
1
The DCP-J100 and DCP-J105 have the same control panel keys.
8
7
100% Normal
01
1
1
2
6
Copy keys:
You can temporarily change the copy settings
when in copy mode.
 Enlarge/Reduce
Lets you enlarge or reduce size of copies
depending on the ratio you select.
 Copy Quality
Use this key to temporarily change the
quality of your copies.
 Number of Copies
Use this key to make multiple copies.
 Copy Options
You can quickly and easily select
temporary settings for copying.
Menu keys:
 Menu
Lets you access the main menu.
 +a or -b
Press to scroll through the menus and
options.
 OK
Lets you select a setting.
3
SCAN
Lets you access Scan mode.
4
Start keys:

Mono Start
Lets you start making copies in
monochrome. Also lets you start a
scanning operation (in colour or mono,
depending on the scan setting in the
ControlCenter software).

Colour Start
Lets you start making copies in full colour.
Also lets you start a scanning operation (in
colour or mono, depending on the scan
setting in the ControlCenter software).
General information
1
6
2
3
5
4
5
You can turn the machine on and off.
If you turn the machine off, it will still
periodically clean the print head to maintain
print quality. To prolong print head life, provide
the best ink cartridge economy, and maintain
print quality, you should keep your machine
connected to the power at all times.
6
Stop/Exit
Stops an operation or exits from a menu.
7
Warning LED
Blinks in orange when the LCD displays an
error or an important status message.
8
LCD (Liquid Crystal Display)
Displays messages on the screen to help you
set up and use your machine.
7
Chapter 1
Warning LED indications
The Warning LED (Light Emitting Diode) is a
light that shows the DCP status. The LCD
shows the current machine status when the
machine is idle.
LED
DCP
status
Description
Ready
The DCP is ready for
use.
1
LCD display
LCD Contrast
You can adjust the LCD contrast for a sharper
and more vivid display. If you are having
difficulty reading the LCD, try changing the
contrast setting.
a
b
Press Menu.
c
Press a or b to choose
2.LCD Contrast.
Press OK.
d
Press a or b to choose Light or Dark.
Press OK.
e
Press Stop/Exit.
Off
Orange
8
Cover open The cover is open.
Close the cover. (See
Error and maintenance
messages on page 39.)
Cannot
print
Replace the ink
cartridge with a new
one. (See Replacing the
ink cartridges
on page 31.)
Paper error
Put paper in the tray or
clear the paper jam.
Check the LCD
message. (See If you
are having difficulty with
your machine
on page 52.)
Other
messages
Check the LCD
message. (See Error
and maintenance
messages on page 39.)
Press a or b to choose
0.Initial Setup.
Press OK.
1
1
2
Loading paper
2
b
Loading paper and
other print media
Lift the output paper tray cover (1).
2
2
1
Load only one size of paper and one type of
paper in the paper tray at any time.
(For more information about paper size,
weight and thickness, see Choosing the right
print media on page 18.)
a
Pull the paper tray completely out of the
machine.
c
NOTE
• If the paper support flap (1) is open, close
it, and then close the paper support (2).
Gently press and slide the paper width
guides (1) and then the paper length
guide (2) to fit the paper size.
Make sure that the triangular marks (3)
on the paper width guides (1) and paper
length guide (2) line up with the marks
for the paper size you are using.
1
3
1
2
• When you load a different paper size in
the tray, you will need to change the
Paper Size setting in the menu of the
machine at the same time.
(See Paper Size on page 15.)
2
3
9
Chapter 2
e
NOTE
When you are using Legal size paper,
press and hold the universal guide release
button (1) as you slide out the front of the
paper tray. (Only available for some
countries.)
Gently put the paper into the paper tray
print side down and top edge in first.
Check that the paper is flat in the tray.
1
d
Fan the stack of paper well to avoid
paper jams and misfeeds.
IMPORTANT
Be careful not to push the paper in too far;
it may lift at the back of the tray and cause
paper feed problems.
NOTE
NOTE
Always make sure that the paper is not
curled or wrinkled.
10
If you want to add paper before the tray is
empty, remove the paper from the tray
and combine it with the paper you are
adding. Always fan the stack of paper well
before loading it in the tray. If you add
paper without fanning the stack, the
machine may feed multiple pages.
Loading paper
f
Gently adjust the paper width guides (1)
to fit the paper.
Make sure the paper width guides lightly
touch the sides of the paper.
i
While holding the paper tray in place,
pull out the paper support (1) until it
locks into place, and then unfold the
paper support flap (2).
2
1
2
1
IMPORTANT
DO NOT use the paper support flap for
Legal size paper. (Only available for some
countries.)
g
Close the output paper tray cover.
h
Slowly and firmly push the paper tray
completely into the machine.
11
Chapter 2
Loading envelopes
2
Loading envelopes
a
About envelopes
2
 Use envelopes that weigh between 80 to
95 gsm.
 Some envelopes need margin settings to
be set in the application. Make sure you
do a test print first before printing multiple
envelopes.
IMPORTANT
DO NOT use the following types of
envelopes, as they will not feed correctly:
• That are of a baggy construction.
• That have windows.
• That are embossed (have raised
writing on them).
• That have clasps or staples.
• That are pre-printed on the inside.
Glue
Double flaps
Occasionally you may experience paper
feed problems caused by the thickness,
size and flap shape of the envelopes you
are using.
12
Before loading, press the corners and
sides of envelopes to make them as flat
as possible.
IMPORTANT
If envelopes are “double-feeding”, put one
envelope in the paper tray at a time.
2
Loading paper
b
Put envelopes in the paper tray with the
address side down. If the envelope flaps
are on the long edge, load the
envelopes in the tray with the flap on the
left, as shown in the illustration. Gently
press and slide the paper width
guides (1) and paper length guide (2) to
fit the size of the envelopes.
If you have problems printing on
envelopes with the flap on the short edge,
try the following:
a
b
Open the envelope flap.
c
Select Reverse Print (Windows®) or
Reverse page orientation (Macintosh)
in the printer driver’s dialog box, and
then adjust the size and margins in your
application.
(See Software and Network User’s
Guide.)
2
Put the envelope into the paper tray with
the address side down and the flap
positioned as shown in the illustration.
1
2
13
2
Chapter 2
Unprintable area
2
The printable area depends on the settings in the application you are using. The figures show the
unprintable areas on cut-sheet paper and envelopes. The machine can print in the shaded areas
of cut-sheet paper when the Borderless print feature is available and turned on.
(See Software and Network User’s Guide.)
Cut-Sheet Paper
Envelopes
1
2
1
4
2
3
4
3
Top (1)
Left (2)
Bottom (3)
Right (4)
Cut-Sheet
3 mm
3 mm
3 mm
3 mm
Envelopes
22 mm
3 mm
22 mm
3 mm
NOTE
The Borderless print feature is not available for envelopes and 2-sided printing.
14
Loading paper
Paper settings
Paper Type
2
2
To get the best print quality, set the machine
for the type of paper you are using.
a
b
c
d
e
Press Menu.
Paper Size
2
You can use the following sizes of paper for
copies: A4, A5, Photo (10  15 cm), Letter
and Legal 1. When you change the size of
paper you load in the machine, you will need
to change the Paper Size setting at the
same time.
Press a or b to choose 2.Copy.
Press OK.
a
b
Press a or b to choose 1.Paper Type.
Press OK.
c
Press a or b to choose Plain Paper,
Inkjet Paper, Brother BP71,
Other Glossy or Transparency.
Press OK.
Press a or b to choose 2.Paper Size.
Press OK.
d
Press a or b to choose A4, A5,
10x15cm, Letter or Legal 1.
Press OK.
Press Stop/Exit.
e
Press Stop/Exit.
NOTE
1
Press Menu.
Press a or b to choose 2.Copy.
Press OK.
Only available for some countries.
The machine ejects paper with the printed
surface face up onto the paper tray at the
front of the machine. When you use
transparencies or glossy paper, remove
each sheet at once to prevent smudging
or paper jams.
15
2
Chapter 2
Acceptable paper and
other print media
The print quality can be affected by the type
of paper you use in the machine.
To get the best print quality for the settings
you have chosen, always set the Paper Type
to match the type of paper that is loaded in
the tray.
You can use plain paper, inkjet paper (coated
paper), glossy paper, transparencies and
envelopes.
Recommended print media
2
To get the best print quality, we suggest using
the Brother paper in the table.
If Brother paper is not available in your
country, we recommend testing various
papers before purchasing large quantities.
We recommend using 3M Transparency Film
when you print on transparencies.
Brother paper
Paper Type
Item
We recommend testing various paper types
before buying large quantities.
A4 Plain
BP60PA
A4 Glossy Photo
BP71GA4
For best results, use Brother paper.
A4 Inkjet (Matte)
BP60MA
10  15 cm Glossy
Photo
BP71GP
 When you print on inkjet paper (coated
paper), transparencies and glossy paper,
be sure to choose the correct print media
in the printer driver’s Basic tab or the
machine’s Paper Type setting.
(See Paper Type on page 15.)
 When you print on Brother Photo paper,
load one extra sheet of the same photo
paper in the paper tray. An extra sheet has
been included in the paper package for
this purpose.
 When using transparencies or photo
paper, remove each sheet at once to
prevent smudging or paper jams.
 Avoid touching the printed surface of the
paper immediately after printing; the
surface may not be completely dry and
may stain your fingers.
16
2
Handling and using print
media
 Store paper in its original packaging and
keep it sealed. Keep the paper flat and
away from moisture, direct sunlight and
heat.
 Avoid touching the shiny (coated) side of
the photo paper. Load photo paper with
the shiny side facing down.
 Avoid touching either side of the
transparency paper because they absorb
water and perspiration easily, and this
may cause decreased output quality.
Transparencies designed for laser
printers/copiers may stain your next
document. Use only transparencies
recommended for inkjet printing.
2
Loading paper
IMPORTANT
DO NOT use the following kinds of paper:
• Damaged, curled, wrinkled, or
irregularly shaped paper
2
1
1
1
2 mm or greater curl may cause jams
to occur.
• Extremely shiny or highly textured
paper
• Paper that cannot be arranged
uniformly when stacked
• Short grain paper
Paper capacity of the output paper
tray cover
2
Up to 50 sheets of 80 gsm A4 paper.
 Transparencies and photo paper must be
picked up from the output paper tray cover
one page at a time to avoid smudging.
17
Chapter 2
Choosing the right print media
2
Paper type and size for each operation
Paper Type
Paper Size
Cut-Sheet
Cards
Envelopes
Transparencies
1
2
Usage
Copy
Printer
A4
210  297 mm (8.3  11.7 in.)
Yes
Yes
Letter
215.9  279.4 mm (8 1/2  11 in.)
Yes
Yes
Legal 1
215.9  355.6 mm (8 1/2  14 in.)
Yes
Yes
Executive
184  267 mm (7 1/4  10 1/2 in.)
–
Yes
JIS B5 1
182  257 mm (7.2  10.1 in.)
–
Yes
A5
148  210 mm (5.8  8.3 in.)
Yes
Yes
A6
105  148 mm (4.1  5.8 in.)
–
Yes
Photo
10  15 cm (4  6 in.)
Yes
Yes
Photo 2L
13  18 cm (5  7 in.)
–
Yes
Index Card
127  203 mm (5  8 in.)
–
Yes
C5 Envelope
162  229 mm (6.4  9 in.)
–
Yes
DL Envelope
110  220 mm (4.3  8.7 in.)
–
Yes
Com-10
105  241 mm (4 1/8  9 1/2 in.)
–
Yes
Monarch
98  191 mm (3 7/8  7 1/2 in.)
–
Yes
A4
210  297 mm (8.3  11.7 in.)
Yes
Yes
Letter
215.9  279.4 mm (8 1/2  11 in.)
Yes
Yes
Legal 1
215.9  355.6 mm (8 1/2  14 in.)
Yes
Yes
A5
148  210 mm (5.8  8.3 in.)
Yes
Yes
Only available for some countries.
Paper weight, thickness and capacity
Paper Type
2
Weight
Thickness
No. of
sheets
Plain Paper
64 to 120 gsm
0.08 to 0.15 mm
100 1
Inkjet Paper
64 to 200 gsm
0.08 to 0.25 mm
20
Glossy Paper
Up to 220 gsm
Up to 0.25 mm
20 2
Photo Card
Up to 220 gsm
Up to 0.25 mm
20 2
Index Card
Up to 120 gsm
Up to 0.15 mm
30
Envelopes
80 to 95 gsm
Up to 0.52 mm
10
Transparencies
–
–
10
Cut-Sheet
Cards
1
Up to 100 sheets of 80 gsm paper.
2
BP71 (260 gsm) paper is especially designed for Brother inkjet machines.
18
3
Loading documents
How to load
documents
b
3
3
Using the document guidelines on the
left and top, place the document
face down in the upper left corner of the
scanner glass.
You can make copies, or scan from the
scanner glass.
Using the scanner glass
3
3
1
You can use the scanner glass to copy, or
scan single pages or pages of a book.
Document sizes supported
Length:
Up to 297 mm
Width:
Up to 215.9 mm
Weight:
Up to 2 kg
How to load documents
a
3
3
1
Lift the document cover.
c
document cover
Close the document cover.
IMPORTANT
If you are scanning a book or thick
document, DO NOT slam the cover down
or press on it.
19
Chapter 3
Unscannable area
3
The scannable area depends on the settings
in the application you are using. The figures
show the unscannable areas.
1
2
4
3
Usage
Copy
Scan
20
Document
Size
Top (1)
Left (2)
Bottom (3)
Right (4)
All paper
sizes
3 mm
3 mm
1 mm
1 mm
4
Making copies
How to copy
4
The following steps show the basic copy
operation.
a
b
c
4
4
If you want more than one copy, press
Number of Copies repeatedly until the
number of copies you want appears (up
to 99).
Or press a or b to change the number of
copies.
The machine returns to its default settings
one minute after it finishes copying.
NOTE
You can save some of the copy settings
you use most often by setting them as the
default. You can find instructions on how
to do this in the section for each feature.
Press Mono Start or Colour Start.
To stop copying, press Stop/Exit.
Copy settings
When you want to quickly change the copy
settings temporarily for the next copy, use the
Copy keys. You can use different
combinations of settings.
Place the document face down on the
scanner glass.
(See Using the scanner glass
on page 19.)
Stop copying
4
4
(Basic User’s Guide)
For information about changing the following
copy settings, see page 22.
 Paper Type
 Paper Size
(Advanced User’s Guide)
For information about changing the following
copy settings, see Advanced User’s Guide:
Copy options.
 Quality
 Enlarge/Reduce
 Page Layout
 2in1(ID)
 Density
 Remove Background
21
Chapter 4
Paper Options
4
Paper Type
4
If you are copying on a special type of paper,
set the machine for the type of paper you are
using to get the best print quality.
Press
Paper Size
If you are copying on paper other than A4
size, you will need to change the Paper Size
setting. You can copy only on A4, A5, Photo
(10  15 cm), Letter, or Legal 1 paper.
Press
10(W)x15(H)cm
Inkjet Paper
Letter
Brother BP71
Legal 1
Other Glossy
and then a or b to
choose Paper Size
Transparency
a
b
c
Load your document.
Enter the number of copies you want.
Press Copy Options and a or b to
choose Paper Type.
Press OK.
d
Press a or b to choose the type of paper
you are using.
Press OK.
e
Press Mono Start or Colour Start.
NOTE
To change the default setting, see Paper
Type on page 15.
22
A4
A5
Plain Paper
and then a or b to
choose Paper Type
4
1
Only available for some countries
a
b
c
Load your document.
Enter the number of copies you want.
Press Copy Options and a or b to
choose Paper Size.
Press OK.
d
Press a or b to choose the size of paper
you are using.
Press OK.
e
Press Mono Start or Colour Start.
NOTE
To change the default setting, see Paper
Size on page 15.
5
How to print from a computer
Printing a document
5
5
The machine can receive and print data from
your computer. To print from a computer, you
must install the printer driver.
(For more information, see Software and
Network User’s Guide.)
a
Install the Brother printer driver from the
CD-ROM. (See Quick Setup Guide.)
b
From your application, choose the Print
command.
c
Choose the name of your machine in the
Print dialog box and click Properties or
Preferences, depending on the
application you are using.
d
Choose the settings you want to change
in the Properties dialog box.
Commonly used settings include:
5
 Media Type
 Print Quality
 Paper Size
 Orientation
 Colour / Greyscale
 Ink Save Mode
 Scaling
 2-sided / Booklet
e
f
Click OK.
Click Print (or OK depending on the
application you are using) to begin
printing.
23
6
How to scan to a computer
Before scanning
6
6
To use the machine as a scanner, install a scanner driver.
If the machine is on a network (DCP-J105), configure it with a TCP/IP address.
 Install the scanner drivers from the CD-ROM. (See Quick Setup Guide: Install MFL-Pro Suite.)
 Configure the machine with a TCP/IP address if network scanning does not work (DCP-J105).
Scanning a document as a PDF file using
ControlCenter4 (Windows®)
(For detailed information, see Software and Network User’s Guide.)
NOTE
• The screens on your PC may vary depending on your model.
• This section is based on using the Advanced Mode of ControlCenter4.
ControlCenter4 is a software utility that lets you quickly and easily access the applications you use
most often. Using ControlCenter4 eliminates the need to manually launch specific applications.
a
b
Load your document. (See How to load documents on page 19.)
(Windows® XP, Windows Vista® and Windows® 7)
Open ControlCenter4 by clicking
(Start)/All Programs/Brother/DCP-XXXX (where
XXXX is your model name)/ControlCenter4. The ControlCenter4 application will open.
(Windows® 8)
Click
(Brother Utilities), and then click the drop-down list and select your model name
(if not already selected). Click SCAN in the left navigation bar, and then click
ControlCenter4. The ControlCenter4 application will open.
24
6
How to scan to a computer
c
If the ControlCenter4 Mode screen appears, choose the Advanced Mode, and then click
OK.
6
d
Make sure the machine you want to use is selected from the Model drop-down list.
25
Chapter 6
e
Set the scanning configuration.
Click Configuration, and then select Button settings, Scan and File.
The configuration dialog box appears. You can change the default settings.
1
2
3
4
5
1 Choose PDF (*.pdf) from the File Type drop-down list.
2 You can enter the file name you want to use for the document.
3 You can save the file to the default folder, or choose your preferred folder by clicking the
(Browse) button.
4 You can choose a scanning resolution from the Resolution drop-down list.
5 You can choose the document size from the Document Size drop-down list.
f
26
Click OK.
How to scan to a computer
g
h
Click the Scan tab.
Click File.
6
i
Click Scan.
The machine starts the scanning process. The folder where the scanned data is saved will
open automatically.
27
Chapter 6
How to change the machine’s SCAN mode
settings for PDF scanning using ControlCenter4
(Windows®)
You can change your machine’s SCAN mode settings using ControlCenter4. (Windows®)
a
(Windows® XP, Windows Vista® and Windows® 7)
Open ControlCenter4 by clicking
(Start)/All Programs/Brother/DCP-XXXX (where
XXXX is your model name)/ControlCenter4. The ControlCenter4 application will open.
(Windows® 8)
Click
(Brother Utilities), and then click the drop-down list and select your model name
(if not already selected). Click SCAN in the left navigation bar, and then click
ControlCenter4. The ControlCenter4 application will open.
b
c
d
28
Make sure the machine you want to use is selected from the Model drop-down list.
Click the Device Settings tab.
Click Device Scan Settings.
6
How to scan to a computer
e
Choose the File tab. You can change the default settings.
1
2
3
4
5
6
1 Choose PDF (*.pdf) from the File Type drop-down list.
2 You can enter the file name you want to use for the document.
3 You can save the file to the default folder, or choose your preferred folder by clicking the
(Browse) button.
4 You can choose a scanning resolution from the Resolution drop-down list.
5 You can choose the document size from the Document Size drop-down list.
f
Click OK.
29
Chapter 6
How to scan a document as a PDF file using the
control panel (Windows® and Macintosh)
a
Load your document. (See How to load documents on page 19.)
b
Press
c
Press a or b to choose Scan to File.
Press OK.
d
If the machine is connected to a network 2, press a or b to select the PC Name. Press OK.
Do one of the following:
(SCAN).
 If you want to use the default settings, press a or b to choose Off.
Press OK.
Go to step g.
 If you want to change the default settings, go to step e.
e
Press a or b to choose On.
Press OK.
f
Choose the settings for Scan Type as required. Press OK.
Repeat this step for the settings for Resolution, File Type, Scan Size and
Remove Bkg. Clr.
g
Press Mono Start or Colour Start.
The machine starts the scanning process.
NOTE
The following scan modes are available.
• Scan to File
• Scan to Image
• Scan to E-mail
• Web Service 1 2
1
Windows® users only. (Windows Vista® SP2 or later, Windows® 7 and Windows® 8)
(See Software and Network User’s Guide.)
2
(DCP-J105)
30
6
A
Routine maintenance
Replacing the ink
cartridges
Your machine is equipped with an ink dot
counter. The ink dot counter monitors the
level of ink in each of the four cartridges.
When the machine detects an ink cartridge is
running out of ink, the machine will display a
message.
NOTE
For example, when one of the ink
cartridges is nearly at the end of its life, the
LCD will display Ink Low XXXXXXX
(name of colour).
You should purchase a replacement
cartridge in preparation for when the
machine indicates the colour is completely
at the end of its life.
When one of the ink cartridges is at the
end of its life, the LCD will display
Cannot Print or B&W Print Only.
You should only replace the actual ink
cartridge when this message
Cannot Print or B&W Print Only
appears on the LCD.
The LCD will show which ink cartridge is low
or needs replacing. Be sure to follow the LCD
prompts to replace the ink cartridges in the
correct order.
A
CAUTION
A
If ink gets in your eyes, wash it out with
water at once and call a doctor if you are
concerned.
IMPORTANT
Brother multifunction machines are
designed to work with ink of a particular
specification and will work to a level of
optimum performance and reliability when
used with Brother Original ink cartridges.
Brother cannot guarantee this optimum
performance and reliability if ink or ink
cartridges of other specifications are
used. Brother does not therefore
recommend the use of cartridges other
than Brother Original cartridges or the
refilling of used cartridges with ink from
other sources. Damage to the product
caused by the use of consumables
manufactured by third parties may not be
covered by the product warranty. Please
refer to the terms of the product warranty.
a
Open the ink cartridge cover (1).
If an ink cartridge has reached the end
of its life, the LCD shows
B&W Print Only or Cannot Print.
Even though the machine tells you to replace
an ink cartridge, there will be a small amount
of ink left in the ink cartridge. It is necessary
to keep some ink in the ink cartridge to
prevent air from drying out and damaging the
print head assembly.
1
31
A
b
Press the lock release lever (1) as
shown to release the cartridge indicated
on the LCD. Remove the cartridge from
the machine.
d
Turn the green release lever on the
orange protective packing (1)
counterclockwise until it releases the
vacuum seal. Then remove the orange
protective packing as shown.
1
1
1
c
Open the new ink cartridge bag for the
colour indicated on the LCD, and then
take out the ink cartridge.
IMPORTANT
DO NOT shake the ink cartridges. If ink
gets on your skin or clothing, immediately
wash it off with soap or detergent.
32
Routine maintenance
e
f
Each colour has its own correct position.
Insert the ink cartridge in the direction of
the arrow on the label.
Gently push the back of the ink
cartridge—marked PUSH—until the
cartridge lever lifts, and then close the
ink cartridge cover.
NOTE
• If you replaced an ink cartridge, for
example Black, the LCD may ask you to
verify that it is a brand new one (for
example, Did You Change Blck?).
For each new cartridge you installed,
press a (Yes) to reset the ink dot counter
for that colour. If the ink cartridge you
installed is not a brand new one, be sure
to press b (No).
• If the LCD shows No Ink Cartridge or
Cannot Detect after you install the ink
cartridge, check that the ink cartridge is a
brand new Brother Original cartridge and
that it is installed correctly. Remove the
ink cartridge and reinstall it slowly and
firmly until the cartridge lever lifts.
A
IMPORTANT
• DO NOT take out ink cartridges if you do
not need to replace them. If you do so, it
may reduce the ink quantity and the
machine will not know the quantity of ink
left in the cartridge.
• DO NOT touch the cartridge insertion
slots. If you do so, the ink may stain your
skin.
g
The machine will automatically reset the
ink dot counter.
• If you mix the colours by installing an ink
cartridge in the wrong position, clean the
print head several times after correcting
the cartridge installation.
• Once you open an ink cartridge, install it in
the machine and use it up within six
months of installation. Use unopened ink
cartridges by the expiration date written on
the cartridge package.
• DO NOT dismantle or tamper with the ink
cartridge; this can cause the ink to leak out
of the cartridge.
33
Cleaning and checking
the machine
Cleaning the scanner glass
a
Unplug the machine from the electrical
socket.
b
Lift the document cover (1). Clean the
scanner glass (2) and the white
plastic (3) with a soft lint-free cloth
moistened with a non-flammable glass
cleaner.
A
A
To maintain good print quality, the machine
will automatically clean the print head when
needed. You can start the cleaning process
manually if there is a print quality problem.
Clean the print head if you get a horizontal
line in the text or graphics, or blank text on
your printed pages. You can clean Black only;
Yellow, Cyan, and Magenta at once; or all
four colours at once.
Cleaning the print head consumes ink.
Cleaning too often uses ink unnecessarily.
IMPORTANT
DO NOT touch the print head. Touching
the print head may cause permanent
damage and may void the print head’s
warranty.
1
3
2
NOTE
In addition to cleaning the scanner glass
with a non-flammable glass cleaner, run
your finger tip over the glass to see if you
can feel anything on it. If you feel dirt or
debris, clean the glass again
concentrating on that area. You may need
to repeat the cleaning process three or
four times. To test, make a copy after each
cleaning attempt.
34
Cleaning the print head
a
b
Press Menu.
c
Press a or b to choose 2.Cleaning.
Press OK.
d
Press a or b to choose Black, Colour
or All.
Press OK.
The machine cleans the print head.
When cleaning has finished, the
machine will go back to the Ready
mode.
Press a or b to choose 1.Ink.
Press OK.
A
Routine maintenance
g
NOTE
• If you clean the print head at least five
times and the print has not improved, try
installing a new Brother Original
Innobella™ ink cartridge for each
problematic colour. Try cleaning the print
head again up to five more times. If the
print has not improved contact Brother
customer service or your local Brother
dealer.
The LCD asks you if the print quality is
OK.
Do one of the following:
 If all lines are clear and visible, press
a (Yes) to finish the Print Quality
check and go to step k.
 If you can see missing short lines as
shown below, press b to choose No.
OK
• You can also clean the print head from
your PC.
Poor
(See Software and Network User’s
Guide.)
Checking the print quality
The LCD asks you if the print quality is
OK for black and then the three colours.
Press a (Yes) or b (No).
i
The LCD asks you if you want to start
cleaning.
Press a (Yes).
The machine starts cleaning the print
head.
j
After the cleaning procedure is finished,
press Colour Start.
The machine prints the Print Quality
Check Sheet again. Return to step h.
k
Press Stop/Exit.
A
If faded or streaked colours and text appear
on your printouts, some of the print head
nozzles may be clogged. You can check this
by printing the Print Quality Check Sheet and
looking at the nozzle check pattern.
a
b
h
Press Menu.
Press a or b to choose 1.Ink.
Press OK.
c
Press a or b to choose 1.Test Print.
Press OK.
d
Press a or b to choose
Print Quality.
Press OK.
e
Press Colour Start.
The machine starts printing the Print
Quality Check Sheet.
f
Check the quality of the four colour
blocks on the sheet.
If you clean the print head at least five times
and the print has not improved, try installing a
new Genuine Brother Brand replacement ink
cartridge for each problematic colour. Try
cleaning the print head again up to five more
times. If the print has not improved, contact
Brother customer service or your local
Brother dealer.
IMPORTANT
DO NOT touch the print head. Touching
the print head may cause permanent
damage and may void the print head's
warranty.
35
A
NOTE
e
Press Mono Start or Colour Start.
The machine starts printing the
Alignment Check Sheet.
f
For the “A” pattern, press a or b to
choose the number of the test print that
has the least visible vertical stripes
(1-9).
Press OK.
Repeat this step for the B, C, D and E
patterns. In the example number 6 is the
best choice for A, B, C, D and E.
g
Press Stop/Exit.
i
When a print head
nozzle is clogged
the printed
sample looks like
this.
After the print
head nozzle is
cleaned, the
horizontal lines
are gone.
Checking the print alignment
A
If your printed text becomes blurred or
images become faded, you may need to
adjust the print alignment after transporting
the machine.
a
b
Press Menu.
c
Press a or b to choose 1.Test Print.
Press OK.
d
Press a or b to choose Alignment.
Press OK.
Press a or b to choose 1.Ink.
Press OK.
NOTE
i
When the print
alignment is not
adjusted correctly,
text looks blurry
like this.
36
After the print
alignment is
adjusted correctly,
text looks like this.
Routine maintenance
Setting the date and
time
A
Setting the date and time allows the machine
to clean the print head regularly and maintain
optimum print quality.
a
b
Press Menu.
c
Press a or b to choose 1.Date&Time.
Press OK.
d
Press a or b to enter the last two digits of
the year, and then press OK.
e
Press a or b to enter the two digits for
the month, and then press OK.
f
Press a or b to enter the two digits for
the day, and then press OK.
g
Press a or b to enter the two digits for
the hour in 24-hour format, and then
press OK.
(For example, enter 1 5 for 3:00 P.M.)
h
Press a or b to enter the two digits for
the minute, and then press OK.
i
Press Stop/Exit.
Press a or b to choose
0.Initial Setup.
Press OK.
A
37
B
Troubleshooting
B
If you think there is a problem with your machine, check each of the items below first and follow
the troubleshooting tips.
You can correct most problems by yourself. If you need additional help, the Brother Solutions
Center offers the latest FAQs and troubleshooting tips.
Visit us at http://solutions.brother.com/.
Identifying your problem
B
First, check the following:
 The machine's power cord is connected correctly and the machine's power switch is turned on.
 All of the protective parts have been removed.
 Paper is inserted correctly in the paper tray.
 The interface cables are securely connected to the machine and the computer, or the wireless
connection is set up on both the machine and your computer.
 LCD messages
(See Error and maintenance messages on page 39.)
If you did not solve your problem with the above checks, identify your problem and then go to the
suggested page.
Paper handling and Printing problems:
 Printing Difficulties on page 52
 Print Quality Difficulties on page 54
 Paper Handling Difficulties on page 55
Copying problems:
 Copying Difficulties on page 56
Scanning problems:
 Scanning Difficulties on page 56
Software and Network problems:
 Software Difficulties on page 56
 Network Difficulties (DCP-J105) on page 57
38
Troubleshooting
Error and maintenance messages
B
As with any sophisticated office product, errors may occur and consumable items may need to be
replaced. If this happens, your machine identifies the error or required routine maintenance and
shows the appropriate message. The most common error and maintenance messages are shown
in the table.
You can clear most errors and perform routine maintenance by yourself. If you need additional
help, the Brother Solutions Center offers the latest FAQs and troubleshooting tips:
Visit us at http://solutions.brother.com/.
Error Message
Cause
Action
B&W Print Only
One or more of the colour ink
cartridges have reached the end of
their life.
Replace the ink cartridges. (See
Replacing the ink cartridges
on page 31.)
You can use the machine in
monochrome mode for approximately
four weeks depending on the number
of pages you print.
NOTE
Replace XX Ink
While this message appears on the
LCD, each operation works in the
following way:
 Printing
If you choose Greyscale in the
Advanced tab of the printer
driver, you can use the machine
as a monochrome printer.
2-sided printing is not available
when this message appears.
 Copying
If the paper type is set to
Plain Paper you can make
copies in monochrome.
Cannot Detect
You installed a new ink cartridge too
quickly and the machine did not
detect it.
An ink cartridge is not installed
correctly.
Cannot Print
Replace XX Ink
The machine will stop all print
operations, you cannot use the
machine until a new ink cartridge is
installed in the following cases:
• If you unplug the machine or take
out the ink cartridge.
• If the paper type is set to anything
except Plain Paper.
• (Windows®) If you check
Slow Drying Paper in the Basic
tab of the printer driver.
(Macintosh) If you check
Slow Drying Paper in the
Print Settings of the printer
driver.
Take out the new ink cartridge and
re-install it slowly and firmly until the
cartridge lever lifts. (See Replacing
the ink cartridges on page 31.)
If you are using non Brother Original
ink, the machine may not detect the
ink cartridge.
Replace the cartridge with a Brother
Original ink cartridge. If the error
message remains, contact Brother
customer service or your local
Brother dealer.
One or more of the ink cartridges
have reached the end of their life. The
machine will stop all print operations.
Replace the ink cartridges. (See
Replacing the ink cartridges
on page 31.)
39
B
Error Message
Cause
Action
Clean Unable XX
The machine has a mechanical
problem.
Open the scanner cover and remove
any foreign objects and paper scraps
from inside the machine. If the error
message continues, disconnect the
machine from the power for several
minutes and reconnect it.
Init Unable XX
Print Unable XX
Scan Unable XX
A foreign object, such as a paper clip
or a piece of ripped paper, is in the
machine.
Close Ink Cover
The ink cartridge cover is not locked
in the closed position.
Firmly close the ink cartridge cover
until it locks into place.
Cover is Open
The scanner cover is not locked in the
closed position.
Lift the scanner cover, and then close
it again.
Make sure the USB cable (if used)
has been guided correctly through the
cable channel and out the back of the
machine.
Data Remaining
Print data is left in the machine's
memory.
Press Stop/Exit. The machine will
cancel the job and clear it from the
memory. Try to print again.
High Temperature
The room temperature is too high.
After lowering the room temperature,
allow the machine to cool down to
room temperature and then try again.
40
Troubleshooting
Error Message
Cause
Action
Ink Box Full
The ink absorber box or flushing box
is full. These components are
periodic maintenance items that may
require replacement after a period of
time to ensure optimum performance
from your Brother machine. Because
these components are periodic
maintenance items, the replacement
is not covered under the warranty.
The need to replace these items and
the time period before replacement is
dependent on the number of purges
and flushes required to clean the ink
system. These boxes acquire
amounts of ink during the different
purging and flushing operations. The
number of times a machine purges
and flushes for cleaning varies
depending on different situations. For
example, frequently powering the
machine on and off will cause
numerous cleaning cycles since the
machine automatically cleans itself
upon power up. The use of
non-Brother ink may cause frequent
cleanings because non-Brother ink
could cause poor print quality, which
is resolved by cleaning. The more
cleaning the machine requires, the
faster these boxes will fill up.
The ink absorber box or flushing box
will need to be replaced. Contact
Brother customer service or your
local Brother dealer to have your
machine serviced.
Other reasons for cleaning are:
1
After a paper jam has been
cleared, the machine
automatically cleans itself.
2
The machine automatically cleans
itself after sitting idle for more than
30 days (infrequent use).
3
The machine automatically cleans
itself after ink cartridges of the
same colour have been replaced
12 times.
B
NOTE
Repairs resulting from the use of
non-Brother supplies may not be
covered under the stated product
warranty.
InkBox NearFull
The ink absorber box or flushing box
is nearly full.
Contact Brother customer service or
your local Brother dealer.
Ink Low XXXXXXX
One or more of the ink cartridges are
near the end of their life.
Order a new ink cartridge. You can
continue printing until the LCD shows
Cannot Print. (See Replacing the
ink cartridges on page 31.)
Low Temperature
The room temperature is too low.
After increasing the room
temperature, allow the machine to
warm up to room temperature and
then try again.
No Ink Cartridge
An ink cartridge is not installed
correctly.
Take out the new ink cartridge and
re-install it slowly and firmly until the
cartridge lever lifts. (See Replacing
the ink cartridges on page 31.)
41
Error Message
Cause
Action
No Paper Fed
The machine is out of paper or paper
is not correctly loaded in the paper
tray.
Do one of the following:
 Refill the paper in the paper tray,
and then press Mono Start or
Colour Start.
 Remove and reload the paper,
then press Mono Start or
Colour Start. (See Loading
paper and other print media
on page 9.)
The paper tray was not fully inserted. Remove the paper tray and re-install
it until it locks into place, and then
press Mono Start or Colour Start on
the control panel.
Paper dust has accumulated on the
surface of the paper pick-up rollers.
Clean the paper pick-up rollers.
(See Advanced User’s Guide:
Cleaning the paper pick-up rollers.)
The Jam Clear Cover is not closed
correctly.
Make sure the Jam Clear Cover is
closed evenly at both ends. (See
Printer jam or paper jam on page 44.)
The paper is jammed in the machine. Remove the jammed paper by
following the steps in Printer jam or
paper jam on page 44.
If this error occurs often during
2-sided printing, the paper feed
rollers may be stained with ink. Clean
the paper feed rollers.
(See Advanced User’s Guide:
Cleaning the paper feed rollers.)
Out of Memory
The machine's memory is full.
If a copy operation is in process:
 Press Stop/Exit and wait until the
other operations that are in
process finish, and then try again.
 Press Mono Start or
Colour Start to print the pages
scanned so far.
42
Troubleshooting
Error Message
Cause
Action
Paper Jam
The paper is jammed in the machine. Remove the jammed paper by
following the steps in Printer jam or
paper jam on page 44.
Make sure the paper length guide is
set to the correct paper size.
DO NOT extend the paper tray when
you load A5 or smaller size paper.
(The extendable tray is only available
for some countries.)
If there is a repeat paper jam, a small
piece of paper may be stuck in the
machine. Make sure paper is not still
jammed in the machine. (See
Additional paper jam clear operations
on page 47.)
Wrong Paper Size
Paper dust has accumulated on the
surface of the paper pick-up rollers.
Clean the paper pick-up rollers.
(See Advanced User’s Guide:
Cleaning the paper pick-up rollers.)
The Paper Size setting does not
match the size of paper in the tray. Or,
you did not set the paper guides in the
tray to the indicators for the paper
size you are using.
1
Check that the Paper Size you
choose matches the size of paper
in the tray.
(See Paper Size on page 15.)
2
Make sure you loaded the paper
in a Portrait position, by setting
the paper guides to the indicators
for your paper size. (See Loading
paper and other print media
on page 9.)
3
After you have checked the paper
size and the paper position, press
Mono Start or Colour Start.
If you are printing from your
computer, make sure the paper size
you choose in the printer driver
matches the size of paper in the tray.
(See Software and Network User’s
Guide.)
43
B
Printer jam or paper jam
B
d
Place both hands under the plastic tabs
on both sides of the machine and lift the
scanner cover into the open position.
e
Pull the jammed paper (1) out of the
machine.
Locate and remove the jammed paper by
following these steps:
a
Unplug the machine from the electrical
socket.
b
Pull the paper tray (1) completely out of
the machine.
1
c
Pull the two green levers inside the
machine towards you to release the
jammed paper.
1
44
Troubleshooting
f
Move the print head (if necessary) to
take out any paper remaining in this
area. Make sure that jammed paper is
not left in the corners of the machine (1)
and (2).
1
2
IMPORTANT
• DO NOT touch the encoder strip (1).
Doing this may cause damage to the
machine.
• If the print head is in the right corner as
shown in the illustration (2), you cannot
move it. Re-connect the power cord. Hold
down Stop/Exit until the print head moves
to the centre. Then unplug the machine
from the power source and take out the
paper.
• If the paper is jammed under the print
head, unplug the machine from the power
source, and then move the print head to
take out the paper.
Hold the concave areas with the triangle
marks shown in the illustration (3) to move
the print head.
2
B
1
3
• If ink gets onto your skin, immediately
wash with soap and plenty of water.
45
g
Be sure to look carefully inside the
machine (1) for any pieces of paper.
i
1
1
j
h
46
Look inside the machine from a lower
angle, and make sure there are no
pieces of paper remaining.
Open the Jam Clear Cover (1) at the
back of the machine.
Remove the jammed paper.
Troubleshooting
k
Close the Jam Clear Cover.
Make sure the cover is closed correctly.
CAUTION
Be careful not to pinch your fingers when
you close the scanner cover.
n
l
Put the paper tray firmly back in the
machine.
While holding the paper tray in place,
pull out the paper support until it locks in
the open position, and then unfold the
paper support flap. Make sure you pull
out the paper support until it locks into
place.
IMPORTANT
DO NOT use the paper support flap for
Legal size paper. (Only available for some
countries.)
o
Re-connect the power cord.
NOTE
B
If there is a repeat paper jam, a small
piece of paper may be stuck in the
machine. (See Additional paper jam clear
operations on page 47.)
Additional paper jam clear operations
m
Lift the scanner cover (1) to release the
lock. Gently push the scanner cover
support down (2) and close the scanner
cover (3) using both hands.
a
Unplug the machine from the electrical
socket.
b
Pull the paper tray (1) completely out of
the machine.
B
1
1
3
2
47
c
Pull the two green levers inside the
machine towards you to release the
jammed paper.
d
Place both hands under the plastic tabs
on both sides of the machine and lift the
scanner cover into the open position.
48
e
Load one sheet of thick A4 or Letter
sized paper, such as glossy paper, deep
into the machine as shown in the
illustration.
Troubleshooting
f
If the thick paper is pushing any jammed
paper out, remove the jammed paper.
h
Open the Jam Clear Cover (1) at the
back of the machine.
1
i
IMPORTANT
DO NOT touch the encoder strip (1).
Doing this may cause damage to the
machine.
Load one sheet of thick A4 or Letter
sized paper, such as glossy paper, deep
into the machine as shown in the
illustration.
B
1
g
Pull the thick paper out of the machine.
49
j
If the thick paper is pushing any jammed
paper out, remove the jammed paper.
l
Close the Jam Clear Cover.
Make sure the cover is closed correctly.
m
Lift the scanner cover (1) to release the
lock. Gently push the scanner cover
support down (2) and close the scanner
cover (3) using both hands.
1
IMPORTANT
DO NOT touch the encoder strip (1).
Doing this may cause damage to the
machine.
1
3
2
CAUTION
Be careful not to pinch your fingers when
you close the scanner cover.
k
50
Pull the thick paper out of the machine.
Troubleshooting
n
Put the paper tray firmly back in the
machine.
o
Re-connect the power cord.
B
51
If you are having difficulty with your machine
NOTE
• For technical help, you must contact Brother customer support.
• If you think there is a problem with your machine, check the following chart and follow the
troubleshooting tips. You can correct most problems by yourself.
• If you need additional help, the Brother Solutions Center offers the latest FAQs and
troubleshooting tips.
Visit us at http://solutions.brother.com/.
Printing Difficulties
Difficulty
Suggestions
No printout.
Check that the correct printer driver has been installed and chosen.
Check to see if the LCD is showing an error message.
(See Error and maintenance messages on page 39.)
Make sure that the machine is online.
(Windows® XP and Windows Server® 2003 (DCP-J105))
Click Start/Printers and Faxes. Right-click Brother DCP-XXXX Printer (where
XXXX is your model name). If the printer is offline, it will show Use Printer Online.
Select this option to enable the printer.
(Windows Vista® and Windows Server ® 2008 (DCP-J105))
Click
/Control Panel/Hardware and Sound/Printers. Right-click
Brother DCP-XXXX Printer (where XXXX is your model name). If the printer is
offline, it will show Use Printer Online. Select this option to enable the printer.
(Windows® 7 and Windows Server® 2008 R2 (DCP-J105))
Click
/Devices and Printers. Right-click Brother DCP-XXXX Printer (where
XXXX is your model name) and choose See what’s printing. Click Printer and
make sure that Use Printer Offline is unchecked.
(Windows® 8 and Windows Server® 2012 (DCP-J105))
Move your mouse to the lower right corner of your desktop. When the menu bar
appears, click Settings, and then click Control Panel. In the
Hardware and Sound (Hardware) group, click View devices and printers.
Right-click Brother DCP-XXXX Printer (where XXXX is your model name) and
select See what’s printing. If printer driver options appear, select your printer
driver. Click Printer in the menu bar and make sure that Use Printer Offline is not
selected.
One or more ink cartridges have reached the end of their life.
(See Replacing the ink cartridges on page 31.)
52
B
Troubleshooting
Printing Difficulties (continued)
Difficulty
Suggestions
No printout.
The document will not print if the old, unprinted data remains in the printer driver
spooler. Open the printer icon, and then delete all the data. Your printer icon can
be found in the following way:
(continued)
(Windows® XP and Windows Server® 2003 (DCP-J105))
Click Start/Printers and Faxes.
(Windows Vista® and Windows Server® 2008 (DCP-J105))
Click
/Control Panel/Hardware and Sound/Printers.
(Windows® 7 and Windows Server® 2008 R2 (DCP-J105))
Click
/Devices and Printers/Printers and Faxes.
(Windows® 8 and Windows Server® 2012 (DCP-J105))
Move your mouse to the lower right corner of your desktop. When the menu bar
appears, click Settings/Control Panel/Hardware and Sound (Hardware)
group/View devices and printers/Printers.
(Mac OS X v10.6.8)
Click System Preferences/Print & Fax.
(OS X v10.7.x, 10.8.x)
Click System Preferences/Print & Scan.
The headers or footers appear
when the document displays on the
screen but they do not show up
when it is printed.
There is an unprintable area on the top and bottom of the page. Adjust the top and
bottom margins in your document to allow for this.
Cannot perform “Page Layout”
printing.
Check that the paper size setting in the application and in the printer driver are the
same.
Print speed is too slow.
Try changing the printer driver setting. The highest resolution needs longer data
processing, sending and printing time. Try the other quality settings in the printer
driver as follows:
(See Unprintable area on page 14.)
(Windows®)
Click Colour Settings on the Advanced tab, and make sure you uncheck
Colour Enhancement.
(Macintosh)
Choose Color Settings, click Advanced Color Settings, and make sure you
uncheck Color Enhancement.
Turn the Borderless feature off. Borderless printing is slower than normal printing.
(See Software and Network User’s Guide.)
Colour Enhancement is not
working correctly.
If the image data is not full colour in your application (such as 256 colour), Colour
Enhancement will not work. Use at least 24 bit colour data with the Colour
Enhancement feature.
Machine does not print from
Try to reduce the print resolution.
Adobe® Illustrator®.
(See Software and Network User’s Guide.)
53
B
Print Quality Difficulties
Difficulty
Suggestions
Poor print quality.
Check the print quality. (See Checking the print quality on page 35.)
Make sure that the Media Type setting in the printer driver or the Paper Type
setting in the machine’s menu matches the type of paper you are using.
(See Paper Type on page 15.)
(See Software and Network User’s Guide.)
Make sure that your ink cartridges are fresh. The following may cause ink to clog:
 The expiration date written on the cartridge package has passed. (Brother
Original cartridges stay usable for up to two years if kept in their original
packaging.)
 The ink cartridge has been in your machine for over six months.
 The ink cartridge may not have been stored correctly before use.
Make sure you are using Brother Original Innobella™ ink. Brother does not
recommend the use of cartridges other than Brother Original cartridges or the
refilling of used cartridges with ink from other sources.
Make sure you are using one of the recommended types of paper.
(See Acceptable paper and other print media on page 16.)
The recommended environment for your machine is between 20 C to 33 C.
White horizontal lines appear in text
or graphics.
Clean the print head. (See Cleaning the print head on page 34.)
Make sure you are using Brother Original Innobella™ ink.
Try using the recommended types of paper.
(See Acceptable paper and other print media on page 16.)
To prolong print head life, provide the best ink cartridge economy and maintain
print quality, we do not recommend frequently unplugging the machine and/or
leaving the machine unplugged for extended periods of time. We recommend
using
to power down the machine. Using
allows minimal power to
the machine ensuring periodic cleanings of the print head occur.
The machine prints blank pages.
Clean the print head. (See Cleaning the print head on page 34.)
Make sure you are using Brother Original Innobella™ ink.
To prolong print head life, provide the best ink cartridge economy and maintain
print quality, we do not recommend frequently unplugging the machine and/or
leaving the machine unplugged for extended periods of time. We recommend
using
to power down the machine. Using
allows minimal power to
the machine ensuring periodic cleanings of the print head occur.
Characters and lines are blurred.
Check the printing alignment. (See Checking the print alignment on page 36.)
Printed text or images are skewed.
Make sure the paper is loaded correctly in the paper tray and the paper guides are
adjusted correctly. (See Loading paper and other print media on page 9.)
Make sure the Jam Clear Cover is closed correctly.
Smudge or stain at the top centre of
the printed page.
54
Make sure the paper is not too thick or curled.
(See Acceptable paper and other print media on page 16.)
Troubleshooting
Print Quality Difficulties (continued)
Difficulty
Suggestions
Printing appears dirty or ink seems
to run.
Make sure you are using the recommended types of paper. (See Acceptable
paper and other print media on page 16.) Don't handle the paper until the ink is
dry.
Make sure the print side is face down in the paper tray.
Make sure you are using Brother Original Innobella™ ink.
If you are using photo paper, make sure that you have set the correct paper type.
If you are printing a photo from your PC, set the Media Type in the printer driver.
Ink is smudged or wet when using
glossy photo paper.
Be sure to check the front and back of the paper. Place the glossy surface (printing
surface) face down. (See Paper Type on page 15.)
If you use glossy photo paper, make sure that the paper type setting is correct.
Stains appear on the reverse side
or at the bottom of the page.
Make sure the printer platen is not dirty with ink. (See Advanced User’s Guide:
Cleaning the machine’s printer platen.)
Make sure you are using Brother Original Innobella™ ink.
Make sure you are using the paper support flap.
(See Loading paper and other print media on page 9.)
Make sure the paper feed rollers are not dirty with ink.
(See Advanced User’s Guide: Cleaning the paper feed rollers.)
The machine prints dense lines on
the page.
(Windows®)
Check Reverse Order in the Basic tab of the printer driver.
The printouts are wrinkled.
(Windows®)
In the printer driver Advanced tab, click Colour Settings and uncheck
Bi-Directional Printing.
B
(Macintosh)
In the printer driver, choose Print Settings, click Advanced, choose
Other Print Options and uncheck Bi-Directional Printing.
Make sure you are using Brother Original Innobella™ ink.
Paper Handling Difficulties
Difficulties
Suggestions
The machine does not feed paper.
Make sure the paper tray is pushed in all the way until it clicks into place.
Make sure the Jam Clear Cover at the back of the machine is closed.
If the LCD shows the Paper Jam message and you still have a problem, see Error
and maintenance messages on page 39.
If there is no paper, load a new stack of paper into the paper tray.
If there is paper in the paper tray, make sure it is straight. If the paper is curled,
straighten it. Sometimes it is helpful to remove the paper, turn the stack over and
put it back into the paper tray.
Reduce the amount of paper in the paper tray, and then try again.
Clean the paper pick-up rollers.
(See Advanced User’s Guide: Cleaning the paper pick-up rollers.)
Photo paper does not feed
correctly.
When you print on Brother Photo paper, load one extra sheet of the same photo
paper in the paper tray. An extra sheet has been included in the paper package
for this purpose.
55
Paper Handling Difficulties (continued)
Difficulties
Suggestions
Machine feeds multiple pages.
Do the following:
(See Loading paper and other print media on page 9.)
 Make sure the paper is loaded correctly in the paper tray.
 Remove all the paper from the tray and fan the stack of paper well, then put it
back in the tray.
 Make sure you do not push the paper in too far.
Make sure the Jam Clear Cover is closed correctly. (See Printer jam or paper jam
on page 44.)
Make sure the Base Pad in the paper tray is not dirty. (See Advanced User’s
Guide: Cleaning the paper pick-up rollers.)
There is a paper jam.
See Printer jam or paper jam on page 44. Make sure the paper guides are set to
the correct paper size. Do not extend the paper tray when you load A5 or smaller
size paper. (The extendable tray is only available for some countries.)
Paper jam reoccurs.
If there is a repeat paper jam, a small piece of paper may be stuck in the machine.
Make sure paper is not still jammed in the machine. (See Additional paper jam
clear operations on page 47.)
The paper jams when you use
2-sided print.
Use one of the jam prevention settings, 2-sided1 or 2-sided2.
(For more information, see Software and Network User’s Guide.)
If paper jams occur often during 2-sided printing, the paper feed rollers may be
stained with ink. Clean the paper feed rollers. (See Advanced User’s Guide:
Cleaning the paper feed rollers.)
Copying Difficulties
Difficulty
Suggestions
Fit to Page does not work correctly.
Make sure your source document is not skewed.
Reposition the document and try again.
Scanning Difficulties
Difficulty
Suggestions
TWAIN or WIA errors appear when
starting to scan. (Windows®)
Make sure the Brother TWAIN or WIA driver is chosen as the primary source in
your scanning application.
TWAIN or ICA errors appear when
starting to scan. (Macintosh)
Make sure the Brother TWAIN driver is chosen as the primary source.
You can also scan documents using the ICA Scanner Driver.
(See Software and Network User’s Guide.)
Software Difficulties
Difficulty
Suggestions
Cannot install software or print.
(Windows®)
Run the Repair MFL-Pro Suite program on the CD-ROM. This program will repair
and reinstall the software.
“Device Busy”
Make sure the machine is not showing an error message on the LCD.
56
Troubleshooting
Network Difficulties (DCP-J105)
Difficulty
Suggestions
Cannot print over the network.
Make sure that your machine is powered on and is online and in the Ready mode.
Print a Network Configuration Report (See Advanced User’s Guide: Reports) and
check the current Network settings printed in this list.
If you are using a wireless connection or are having Network problems
see Software and Network User’s Guide.
The network scanning feature does
not work.
(Windows®)
It is necessary to configure the third-party Security/Firewall Software to allow
Network scanning. To add port 54925 for Network scanning, enter the information
below:
In Name: Enter any description, for example Brother NetScan.
In Port number: Enter 54925.
In Protocol: UDP is selected.
Please refer to the instruction manual that came with your third-party
Security/Firewall Software or contact the software manufacturer.
(Macintosh)
Select Other from the Model drop-down list in the main screen of ControlCenter2.
In the Device Selector window, make sure Network is selected in
Connection Type, and then click Browse. Reselect your network machine, and
press OK.
The Brother software cannot be
installed.
(Windows®)
Allow network access to the following programs if your security software displays
an alert message during MFL-Pro Suite installation.
(Macintosh)
If you are using a firewall function of anti-spyware or antivirus security software,
temporarily disable it and then install the Brother software.
Cannot connect to wireless
network.
Investigate the problem using the WLAN Report.
Press Menu, and then press a or b to choose 4.Print Reports. Press OK.
Press a or b to choose 3.WLAN Report, and then press OK.
See Software and Network User’s Guide.
Reset the network settings.
Press Menu, and then press a or b to choose 3.Network. Press OK. Press a or
b to choose 0.Network Reset, and then press OK.
See Software and Network User’s Guide.
57
B
Machine Information
Checking the serial number
B
c
d
c
d
58
2 Network (DCP-J105)
You can reset the print server back to its
factory settings, such as the password
and IP address information.
(DCP-J100)
Press a or b to choose
4.Machine Info.
Press OK.
(DCP-J105)
Press a or b to choose
5.Machine Info.
Press OK.
3 All Settings
You can restore all settings to the factory
default.
Brother strongly recommends performing
this procedure before handing over or
disposing of the machine.
Press a or b to choose 1.Serial No.
Press OK.
Your machine’s serial number will
appear on the LCD.
How to reset the machine
Press Stop/Exit.
a
b
Press Menu.
c
Press a or b to choose 4.Reset.
Press OK.
d
(DCP-J100)
Press a or b to choose the type of reset,
1.Machine Reset or
2.All Settings.
Press OK.
(DCP-J105)
Press a or b to choose the type of reset,
1.Machine Reset, 2.Network or
3.All Settings.
Press OK.
e
f
Press a to choose a Reset.
You can see the machine’s firmware version
on the LCD.
a
b
1 Machine Reset
You can reset the machine’s settings,
such as the Date and Time.
Press Menu.
Checking the firmware
version
Press Menu.
Press Stop/Exit.
Press a or b to choose
0.Initial Setup.
Press OK.
B
(DCP-J100)
Press a or b to choose
4.Machine Info.
Press OK.
(DCP-J105)
Press a or b to choose
5.Machine Info.
Press OK.
Press a or b to choose 2.Version.
Press OK.
Your machine’s firmware version will
appear on the LCD.
B
The following reset functions are available:
B
You can see the machine’s serial number on
the LCD.
a
b
Reset functions
Press a to confirm.
B
C
Settings and features tables
Using the Settings
tables
Menu keys
C
C
C
Your machine is easy to set up and operate.
All you have to do is press the Menu keys to
choose the settings and options you want to
set as they are displayed on the screen.
We have created step-by-step Settings tables
so you can see all the available choices for
each setting and feature at-a-glance. You can
use these tables to quickly choose your
preferred settings in the machine.
Access the menu.
Scroll through the current
menu level.
C
Go to the next menu level.
Accept an option.
Exit the menu or stop the
current operation.
59
To access the menu mode:
a
b
Press Menu.
Choose an option.
You can scroll quickly through each
menu level by pressing a or b.
1.Ink
2.Copy
3.Network
4.Print Reports
5.Machine Info.
0.Initial Setup
c
Press OK when that option appears on
the LCD.
The LCD will then show the next menu
level.
d
Press a or b to scroll to choose the
setting you want to change.
Press OK.
e
Press a or b to choose the option you
want.
Press OK.
The LCD will show Accepted.
f
Press Stop/Exit.
60
Settings and features tables
Menu table
C
The menu table will help you understand the menu selections of your machine. The factory
settings are shown in bold with an asterisk.
Menu (
)
C
Level1
Level2
Level3
Options
Descriptions
Page
1.Ink
1.Test Print
—
Print Quality
Lets you check the print
quality or alignment.
35
Lets you clean the print
head.
34
Lets you check the
available ink volume.
See
Alignment
2.Cleaning
—
Black
Colour
36
All
3.Ink Volume
—
-nnnnnnn+
-onnnnnn+
.
-oonnnnn+
-ooonnnn+
-oooonnn+
-ooooonn+
-oooooon+
C
-ooooooo+
2.Copy
1.Paper Type
—
Plain Paper*
Inkjet Paper
Sets the type of paper in
the paper tray.
15
Sets the size of the paper
in the paper tray.
15
Brother BP71
Other Glossy
Transparency
2.Paper Size
—
A4*
A5
10x15cm
Letter
(Legal is only available for
some countries.)
Legal
3.Quality
—
Normal*
Best
4.Density
—
-onnnn+
-nonnn+
Chooses the copy
resolution for your type of
document.
See
.
Adjusts the density of
copies.
-nnonn+*
-nnnon+
-nnnno+
See Advanced User’s Guide.
The default settings are shown in Bold with an asterisk.
61
Network menu (DCP-J105)
C
Level1
Level2
Level3
Options
Descriptions
Page
3.Network
1.TCP/IP
1.BOOT Method
Auto*
Chooses the BOOT
method that best suits
your needs.
See
Static
RARP
BOOTP
DHCP
2.IP Address
[000-255].
Enter the IP address.
[000-255].
[000-255].
[000-255]
3.Subnet Mask
[000-255].
Enter the Subnet mask.
[000-255].
[000-255].
[000-255]
4.Gateway
[000-255].
[000-255].
Enter the Gateway
address.
[000-255].
[000-255]
5.Node Name
BRWXXXXXXXXXXXX
Lets you check the Node
name.
6.WINS Config
Auto*
Chooses the WINS
configuration mode.
Static
7.WINS Server
(Primary)
000.000.000.000
(Secondary)
000.000.000.000
8.DNS Server
(Primary)
000.000.000.000
(Secondary)
000.000.000.000
9.APIPA
On*
Off
Specifies the IP address
of the primary or
secondary DNS server.
Automatically allocates
the IP address from the
link-local address range.
2.WLAN Assistant
—
—
You can configure your
wireless network settings
using the Brother
CD-ROM.
3.Setup Wizard
—
—
You can manually
configure your print
server for a wireless
network.
See Software and Network User’s Guide.
The default settings are shown in Bold with an asterisk.
62
Specifies the IP address
of the primary or
secondary WINS server.
.
Settings and features tables
Level1
Level2
Level3
Options
Descriptions
Page
3.Network
4.WPS/AOSS
—
—
You can easily configure
your wireless network
settings using the onebutton push method.
See
5.WPS w/PIN Code
—
—
You can easily configure
your wireless network
settings using WPS with
a PIN code.
6.WLAN Status
1.Status
—
You can see the current
wireless network status.
2.Signal
—
You can see the current
wireless network signal
strength.
3.SSID
—
You can see the current
SSID.
4.Comm. Mode
—
You can see the current
Communication Mode.
7.MAC Address
—
—
You can see your
machine’s MAC address
from the control panel.
8.WLAN Enable
—
On
Lets you use the wireless
network connection.
(Continued)
Off*
0.Network Reset
—
—
.
Restores all network
settings to the factory
default.
C
See Software and Network User’s Guide.
The default settings are shown in Bold with an asterisk.
Menu (continued)
C
Level1
Level2
Level3
Options
Descriptions
Page
3.Print Reports
(DCP-J100)
1.User Settings
—
—
See
2.Network Config
—
—
Prints these lists and
reports.
4.Print Reports
(DCP-J105)
(DCP-J105)
—
—
58
3.WLAN Report
.
(DCP-J105)
4.Machine Info.
(DCP-J100)
1.Serial No.
—
—
Lets you check the serial
number of your machine.
5.Machine Info.
(DCP-J105)
2.Version
—
—
Lets you check the
firmware version of your
machine.
See Advanced User’s Guide.
The default settings are shown in Bold with an asterisk.
63
Level1
Level2
Level3
Options
Descriptions
Page
0.Initial Setup
1.Date&Time
—
—
Sets the date and time in
your machine.
37
2.LCD Contrast
—
Light
Adjusts the contrast of the
LCD.
See
Dark*
3.Sleep Mode
—
1 Min
2 Mins
3 Mins
.
You can choose how long
the machine will remain
idle before it goes into
Sleep mode.
5 Mins*
10 Mins
30 Mins
60 Mins
4.Reset
1.Machine Reset
a Reset b Exit
Resets all the machine’s
settings that you have
changed, such as the
Date and Time.
2.Network
a Reset b Exit
Resets the print server
back to the factory
defaults, such as the
password and IP address
information.
a Reset b Exit
Resets all the machine’s
settings back to the
factory default.
Off
8hours
When this feature is set to
On the machine will turn
itself off one hour after
entering Sleep Mode.
When set to Off, the
machine will not power off
automatically.
(Choose the
language you
want to use)
Allows you to change the
LCD language for your
country.
(DCP-J105)
2.All Settings
(DCP-J100)
3.All Settings
(DCP-J105)
5.Auto Power Off
—
1hour*
2hours
4hours
0.Local Language
—
(depending on
your country)
See Advanced User’s Guide.
The default settings are shown in Bold with an asterisk.
64
58
See
.
Settings and features tables
Enlarge/Reduce (
) (Temporary settings)
C
Level1
Level2
Level3
Options
Descriptions
Page
—
—
—
Fit to Page
You can choose the
enlargement and
reduction ratio.
See
Custom(25-400%)
.
198% 10x15cmiA4
186%10x15cmiLTR
141% A5iA4
100%*
97% LTRiA4
93% A4iLTR
83%
69% A4iA5
47% A4i10x15cm
See Advanced User’s Guide.
The default settings are shown in Bold with an asterisk.
Copy Quality (
) (Temporary settings)
C
C
Level1
Level2
Level3
Options
Descriptions
Page
—
—
—
Normal*
Choose the Copy
resolution.
See
Best
.
See Advanced User’s Guide.
The default settings are shown in Bold with an asterisk.
65
Copy Options (
) (Temporary settings)
C
Level1
Level2
Level3
Options
Descriptions
Page
Paper Type
—
—
Plain Paper*
Choose the paper type.
22
A4*
Choose the paper.
22
A5
(Legal is only available for
some countries.)
Inkjet Paper
Brother BP71
Other Glossy
Transparency
Paper Size
—
—
10(W)x15(H)cm
Letter
Legal
Density
—
—
-onnnn+
Adjusts the density.
-nonnn+
-nnonn+*
-nnnon+
-nnnno+
Stack/Sort
—
—
Stack*
Sort
Page Layout
—
—
Off(1in1)*
2in1(P)
You can choose to stack
or sort multiple copies.
You can make N in 1 or
Poster copies.
2in1(L)
2in1(ID)
4in1(P)
4in1(L)
Poster(3x3)
Remove Bkg. Clr
—
—
Off*
Low
Medium
High
See Advanced User’s Guide.
The default settings are shown in Bold with an asterisk.
66
Changes the amount of
background colour that is
removed.
See
.
Settings and features tables
SCAN (
)
C
Level1
Level2
Level3
Options
Descriptions
Page
Scan to E-mail
Set Options
—
Off*
If you want to use the
control panel to change
the machine’s settings,
choose On.
See
On
.
The settings below will appear when On is selected in Set Options.
Scan Type
—
Colour*
Black and White
Resolution
—
100dpi
200dpi*
You can choose the scan
type for your document.
You can choose the scan
resolution for your
document.
300dpi
600dpi
File Type
—
(If you choose the
Colour option in
the Scan Type
setting)
You can choose the file
format for your document.
PDF*
JPEG
(If you choose the
Mono option in
the Scan Type
setting)
C
PDF*
TIFF
Scan Size
—
A4*
A5
You can choose the scan
size for your document.
10x15cm
Business Card
Letter
Remove Bkg. Clr
—
Off*
Low
Changes the amount of
background colour that is
removed.
Medium
High
See Software and Network User’s Guide.
The default settings are shown in Bold with an asterisk.
67
Level1
Level2
Level3
Options
Descriptions
Page
Scan to Image
Set Options
—
Off*
If you want to use the
control panel to change
the machine’s settings,
choose On.
See
On
The settings below will appear when On is selected in Set Options.
Scan Type
—
Colour*
Black and White
Resolution
—
100dpi
200dpi*
You can choose the scan
type for your document.
You can choose the scan
resolution for your
document.
300dpi
600dpi
File Type
—
(If you choose the
Colour option in
the Scan Type
setting)
You can choose the file
format for your document.
PDF*
JPEG
(If you choose the
Mono option in
the Scan Type
setting)
PDF*
TIFF
Scan Size
—
A4*
A5
You can choose the scan
size for your document.
10x15cm
Business Card
Letter
Remove Bkg. Clr
—
Off*
Low
Medium
High
See Software and Network User’s Guide.
The default settings are shown in Bold with an asterisk.
68
Changes the amount of
background colour that is
removed.
.
Settings and features tables
Level1
Level2
Level3
Options
Descriptions
Page
Scan to File
Set Options
—
Off*
If you want to use the
control panel to change
the machine’s settings,
choose On.
See
On
.
The settings below will appear when On is selected in Set Options.
Scan Type
—
Colour*
Black and White
Resolution
—
100dpi
200dpi*
You can choose the scan
type for your document.
You can choose the scan
resolution for your
document.
300dpi
600dpi
File Type
—
(If you choose the
Colour option in
the Scan Type
setting)
You can choose the file
format for your document.
PDF*
JPEG
(If you choose the
Mono option in
the Scan Type
setting)
PDF*
C
TIFF
Scan Size
—
A4*
A5
You can choose the scan
size for your document.
10x15cm
Business Card
Letter
Remove Bkg. Clr
—
Off*
Low
Changes the amount of
background colour that is
removed.
Medium
High
Web Service
Scan
—
—
(DCP-J105)
Scan for E-mail
—
—
(Appears when
you install a Web
Services
Scanner, which is
displayed in your
computer’s
Scan for Fax
—
—
Scan for Print
—
—
You can scan data by
using the Web Services
protocol.
Windows®
Explorer.)
See Software and Network User’s Guide.
The default settings are shown in Bold with an asterisk.
69
Entering Text
C
You may need to enter text into the machine.
Entering numbers, letters and symbols
C
Press a or b repeatedly to select the number, letter or symbol you want to choose, and press
Number of Copies. Repeat for each character until the number or name is complete and then
press OK.
Inserting spaces
C
To enter a space, press Number of Copies.
NOTE
The characters that are available may differ depending on your country.
Making corrections
If you entered an incorrect number or letter and want to change it, press Enlarge/Reduce or
Number of Copies several times to move the cursor under the incorrect character.
Then press a or b repeatedly to re-enter the correct letter.
You can enter a blank as the correct letter in the same way.
70
C
D
Specifications
D
General
D
NOTE
This chapter provides a summary of the machine’s specifications. For additional specifications
visit http://www.brother.com/.
Printer Type
Inkjet
Print Head
Mono:
Piezo with 210 nozzles  1
Colour:
Piezo with 70 nozzles  3
Memory Capacity
64 MB
LCD (Liquid Crystal
Display)
16 characters  1 line
Power Source
(Taiwan)
AC 100 to 120 V 50/60 Hz
(For other countries)
AC 220 to 240V 50/60Hz
Power Consumption 1
(India)
Copying Mode:
Approx. 16 W 2
Ready Mode:
Approx. 3 W 3
D
Sleep Mode:
Approx. 1.1 W
Off:
Approx. 0.4 W 3 4
3
(For Taiwan and other countries)
Copying Mode:
Approx. 16 W 2
Ready Mode:
Approx. 2.5 W 3
Sleep Mode:
Approx. 0.7 W 3
Off:
Approx. 0.2 W 3 4
1
Measured when the machine is connected to the USB interface. Power consumption varies slightly depending on the
usage environment or part wear.
2
When using resolution: standard / document: ISO/IEC 24712 printed pattern.
3
Measured according to IEC 62301 Edition 2.0.
4
Even when the machine is turned off, it will automatically turn itself on periodically for print head maintenance, and
then turn itself off.
71
Dimension
161 mm
435 mm
374 mm
471 mm
Weight
7.1 kg
Noise Level
Sound Pressure
Temperature
Humidity
Document Size
Operating:
50 dB(A) (Maximum) 1
Operating:
10 to 35 C
Best Print Quality:
20 to 33 C
Operating:
20 to 80% (without condensation)
Best Print Quality:
20 to 80% (without condensation)
Scanner Glass Width: Max. 215.9 mm
Scanner Glass Length: Max. 297 mm
1
72
Noise depends on printing conditions.
Specifications
Print media
Paper Input
D
Paper Tray
D
 Paper type:
Plain Paper, Inkjet Paper (coated paper),
Glossy Paper 1 and Transparency 1 2
 Paper size 3:
A4, Legal 4, Executive, Letter, JIS B5 4, A5, A6, Envelopes (Com-10,
DL, C5, Monarch), Photo (10  15 cm), Photo 2L (13  18 cm) and
Index Card (127  203 mm)
Width: 98 mm - 215.9 mm
Length: 148 mm - 355.6 mm
For more details, see Paper weight, thickness and capacity
on page 18.
 Maximum paper tray capacity:
Approx. 100 sheets of 80 gsm plain paper
Paper Output
Up to 50 sheets of 80 gsm plain paper (face up print delivery to the output
paper tray) 1
1
For glossy paper or transparencies, remove printed pages from the output paper tray immediately after they exit the
machine to avoid smudging.
2
Use only transparency paper recommended for inkjet printing.
3
See Paper type and size for each operation on page 18.
4
Only available for some countries.
D
73
Copy
D
Colour/Monochrome
Yes/Yes
Copy Width
204 mm 1
Multiple Copies
Stacks/Sorts up to 99 pages
Enlarge/Reduce
25% to 400% (in increments of 1%)
Resolution
Prints up to 1200  2400 dpi
1
74
When copying on A4 size paper.
Specifications
Scanner
D
Colour/Monochrome
Yes/Yes
TWAIN Compliant
Yes
(Windows® XP 1/Windows Vista®/Windows® 7/Windows® 8)
(Mac OS X v10.6.8, 10.7.x, 10.8.x)
WIA Compliant
Yes
(Windows® XP 1/Windows Vista®/Windows® 7/Windows® 8)
ICA Compliant
Yes (Mac OS X v10.6.8, 10.7.x, 10.8.x)
Colour Depth
30 bit colour Processing (Input)
24 bit colour Processing (Output) / 256 levels per colour
Greyscale
10 bit colour Processing (Input)
8 bit colour Processing (Output) / 256 levels per colour
Resolution
Up to 19200  19200 dpi (interpolated) 2
Up to 1200  2400 dpi (optical)
Scanning Width and Length
Width: Up to 213.9 mm
Length: Up to 295 mm
1
Windows® XP in this User’s Guide includes Windows® XP Home Edition, Windows® XP Professional, and Windows®
XP Professional x64 Edition.
2
Maximum 1200  1200 dpi scanning when using the WIA Driver for Windows® XP, Windows Vista®, Windows® 7 and
Windows® 8 (resolutions up to 19200  19200 dpi can be selected by using the Brother scanner utility).
D
75
Printer
D
Resolution
Up to 1200  6000 dpi
Printing Width 3
204 mm [210 mm (borderless) 1]
Borderless 2
A4, Letter, A6, Photo (10  15 cm), Index Card
(127  203 mm), Photo 2L (13  18 cm)
Print Speed 4
1
When the Borderless feature is set to On.
2
See Paper type and size for each operation on page 18.
3
When printing on A4 size paper.
4
For detailed specifications visit http://www.brother.com/.
76
Specifications
Interfaces
D
USB 1 2
A USB 2.0 interface cable that is no longer than 2 m.
Wireless LAN 3
IEEE 802.11b/g/n (Infrastructure/Ad-hoc Mode)
1
Your machine has a Hi-Speed USB 2.0 interface. The machine can also be connected to a computer that has a USB
1.1 interface.
2
Third party USB ports are not supported.
3
DCP-J105 only
D
77
Network (DCP-J105)
D
NOTE
For more information about the Network specifications, see the Software and Network User’s
Guide.
You can connect your machine to a network for Network Printing and Network Scanning 1. Also
included is Brother BRAdmin Light 2 Network Management software.
Wireless Network
Security
SSID (32 characters), WEP 64/128 bit, WPA-PSK (TKIP/AES),
WPA2-PSK (AES)
Wireless Setup
Support Utility
AOSS™
Yes
WPS
Yes
1
See Computer requirements on page 79.
2
(Windows®) If you require more advanced printer management, use the latest Brother BRAdmin Professional utility
version that is available as a download from http://solutions.brother.com/.
(Macintosh) The latest Brother BRAdmin Light is available as a download from http://solutions.brother.com/.
78
Specifications
Computer requirements
D
SUPPORTED OPERATING SYSTEMS AND SOFTWARE FUNCTIONS
Hard Disk Space to
install
PC Interface
Computer Platform & Operating
System Version
Windows®
Operating
System
USB 2
Wireless
Processor
802.11b/g/n 3
Printing
32bit (x86)
or 64bit
(x64)
processor
For
Applications
For Drivers
(including
Drivers)
150 MB
1 GB
Windows Vista® 1
500 MB
1.3 GB
Windows® 7 1
650 MB
Windows® XP
Home 1
Scanning
Windows® XP
Professional 1
Windows® 8 1
Windows Server®
N/A
Printing
50 MB
N/A
2003 3
Windows Server®
2003 R2 3
Windows Server®
2008 3
D
64bit (x64)
processor
Windows Server®
2008 R2 3
Windows Server®
2012 3
Macintosh
Operating
System
Mac OS X v10.6.8
Printing
OS X v10.7.x
Scanning
Intel®
Processor
80 MB
550 MB
OS X v10.8.x
Conditions:
1
For WIA, 1200  1200 resolution. Using the
Brother Scanner Utility enables to enhance up to
19200  19200 dpi.
2
Third party USB ports are not supported.
3
DCP-J105 only
For the latest driver updates, visit us at
http://solutions.brother.com/.
All trademarks, brand and product names are the
property of their respective companies.
79
Consumable items
Ink
The machine uses individual Black, Yellow, Cyan and Magenta ink
cartridges that are separate from the print head assembly.
Service Life of Ink
Cartridge
The first time you install a set of ink cartridges the machine will use
an amount of ink to fill the ink delivery tubes for high quality
printouts. This process will only happen once. After this process is
complete the cartridges provided with your machine will have a
lower yield than standard cartridges (75 %). With all following ink
cartridges you can print the specified number of pages.
Replacement
Consumables
<Super High Yield Black> LC539XLBK
<Super High Yield Yellow> LC535XLY
<Super High Yield Cyan> LC535XLC
<Super High Yield Magenta> LC535XLM
Black - Approximately 2,400 pages 1
Yellow, Cyan and Magenta - Approximately 1,300 pages 1
1
Approx. cartridge yield is declared in accordance with ISO/IEC 24711.
For more information about the replacement consumables, visit us
at http://www.brother.com/pageyield/.
What is Innobella™?
Innobella™ is a range of genuine consumables offered by Brother.
The name "Innobella™" derives from the words "Innovation" and
"Bella" (meaning "Beautiful" in Italian) and is a representation of the
"innovative" technology providing you with "beautiful" and "long
lasting" print results.
When you print photo images, Brother recommends Innobella™
glossy photo paper (BP71 series) for high quality. Brilliant prints are
made easier with Innobella™ Ink and paper.
80
D
E
Index
A
Apple Macintosh
See Software and Network User’s Guide.
B
Brother
CreativeCenter ........................................5
C
Cleaning
print head ..............................................34
scanner .................................................34
Consumable items ...................................80
Control panel overview ..............................6
ControlCenter
See Software and Network User’s Guide.
Copy
paper size .............................................22
paper type .............................................22
using scanner glass ..............................19
D
Document
loading ..................................................19
E
Envelopes ......................................... 12, 18
Error messages on LCD ..........................39
B&W Print Only .....................................39
Cannot Detect .......................................39
Cannot Print ..........................................39
Clean Unable ........................................40
Cover is Open .......................................40
Data Remaining ....................................40
Init Unable .............................................40
Ink Box Full ...........................................41
Ink Low .................................................41
InkBox NearFull ....................................41
No Ink Cartridge ....................................41
No Paper Fed .......................................42
Out of Memory ......................................42
Paper Jam ............................................43
Print Unable ......................................... 40
Scan Unable ......................................... 40
Wrong Paper Size ................................ 43
G
Greyscale ................................................ 75
H
Help
Menu Table .......................................... 61
using menu keys .................................. 59
I
Ink cartridges
ink dot counter ...................................... 31
replacing ............................................... 31
Innobella™ .............................................. 80
J
Jams
paper .................................................... 44
L
LCD (Liquid Crystal Display) ..................... 7
Contrast .................................................. 8
M
Macintosh
See Software and Network User’s Guide.
Maintenance, routine
replacing ink cartridges ........................ 31
Mode, entering
SCAN ..................................................... 6
81
E
P
U
Paper ................................................ 16, 73
capacity .................................................18
loading ............................................. 9, 12
loading envelopes .................................12
printable area ........................................14
size ........................................................15
type ................................................ 15, 18
Print
difficulties ..............................................52
paper jams ............................................44
printable area ........................................14
resolution ..............................................76
specifications ........................................76
Printing
See Software and Network User’s Guide.
Unscannable area ................................... 20
R
Resolution
copy ......................................................74
print .......................................................76
scan ......................................................75
S
Scanning
See Software and Network User’s Guide.
Serial Number
how to find ..............See inside front cover
Step-by-step Settings Tables ...................59
T
Text, entering ...........................................70
Transparencies ...........................16, 18, 73
Troubleshooting
error messages on LCD ........................39
if you are having difficulty
copying ...............................................56
Network ..............................................57
paper handling ...................................55
print quality .........................................54
printing ...............................................52
scanning .............................................56
software .............................................56
maintenance messages on LCD ...........39
paper jam ..............................................44
82
W
Windows®
See Software and Network User’s Guide.
Visit us on the World Wide Web
http://www.brother.com/
This machine is approved for use in the country of purchase only. Local Brother companies or their
dealers will only support machines purchased in their own countries.
www.brotherearth.com