HEAVY-DUTY 3/4" AND 7/16" IMPACT WRENCHES

H
E
A
V
Y
-
D
U
T
Y
HEAVY-DUTY
3/4" AND 7/16" IMPACT WRENCHES
FULL POWER IN REVERSE
BEST POWER TO WEIGHT RATIO
9075-20
• 3/4" SQUARE DRIVE WITH FRICTION
■ New Mechanism Delivers Higher Torque
And Smoother Operation
■ Metal Housing
■ 7.0 Amp Milwaukee Built Motor
■ Soft Grip Handle
■ Ergonomically Balanced Center Grip
RING AND THROUGH HOLE SOCKET RETENTION
380
FT.-LBS.
OF TORQUE!
9075-20 FEATURES:
■ 3/4" Square Drive With Friction Ring
and Through Hole Rocket Retention
■ Forward/Reverse Rocker Switch (AC/DC)
Is Ideal When Frequent Reversing Is
Necessary
SEE PAGES 13, 24,
AND 28
FOR CORDLESS
IMPACT WRENCHS
9092-20 FEATURES:
■ 7/16" Hex Quick-Change Dual Ball Bit
Holder
■ Forward/Reverse Lever
■ Hanger Bracket w/Solid Steel Ring for
hanging on belts, climbing pegs and for lifting
with a rope and clasp.
■ Variable Speed Trigger with Speed Setting
Dial
9092-20
• 7/16" HEX QUICK-CHANGE
DUAL BALL BIT HOLDER
• 10' QUIK-LOK CORD
315
FT.-LBS.
OF TORQUE!
SPECIFICATIONS
CAT.
NO.
9075-20
9092-20
VOLTS
120 AC/DC
120 AC
AMPS
7.0
7.0
IMPACTS
PER
MINUTE
2500
1000-2600
NO
LOAD
RPM
1,750
600-1,800
TORQUE
FT./LBS.
380
315
LENGTH
INCHES
11-5/8
12-1/4
NET
WGT.
LBS.
6.2
6.5
SHIP
WGT.
LBS.
8.0
7.8
STANDARD EQUIPMENT: FOR 9075-20 – Tool and 8' 2-Wire Fixed Cord. FOR 9092-20 – Tool and Quik-Lok® Cord 48-76-5010.
ACCESSORIES
1/2" SQUARE DRIVE
HEX SOCKETS
Standard equipment for 9072-22 Kit.
49-66-3080 1/2"
49-66-3090 9/16"
49-66-3100 5/8"
49-66-3110 11/16"
49-66-3120 3/4"
49-66-3130 13/16"
5" LENGTH 1/2" SQUAREDRIVE EXTENSION
48-95-5000
Adapts to 1/2" Square Drive. Provides 5"
additional length where required for use with
sockets.
1/2" SQUARE DRIVE TO 7/16" HEX
QUICK-CHANGE ADAPTER
48-66-0061
Use with 7/16" hex shank auger bits,
selfeed bits or other 7/16" hex shank accessories which have ball-retainer grooves.
RETAINING RINGS FOR 3/4" SQUARE ANVILS
44-86-0282
1-7/16" ID (use with 1-1/2" hub sockets)
44-86-0285
1-5/8" ID (use with 1-3/4" hub sockets)
ROUND END DETENT KIT
49-17-0410
Use with 9066-6, 9068, 9070-20, 9072-20
and 9075-20. For quick socket changes.
1/2" SQUARE DRIVE UNIVERSAL JOINT
48-03-0500
Fits 1/2" Square Drive.Use with Hex Sockets
to reach difficult places at various angles...
also allows clearance around obstructions.
5/8" HEX QUICK-CHANGE
CONVERSION KIT
14-46-9095
Completely assembled, easily converts
7/16" front end to 5/8" hex.
FLAT END DETENT KIT
49-17-0405
For 9066-6, 9068, 9070-20, 9072-20 and
9075-20.
Replaces standard round detent pin on 90666, 9068. Socket will not slip off unless detent
pin is pressed in.
Below Serial No. 656-38701, Use 49-17-0400
Positive Detent Kit
76
CHUCK ADAPTOR
48-66-0065
For 9092-20 and 9099-20.
Adds versatility by enabling these tools
to drill small holes (1/2" diameter max.)
with jobber bits in steel, wood and plastic;
or with carbide tipped bits to drill mortar,
brick, etc. (NOT for use with any accessory
that results in continuous impacting.)
GREASE
49-08-7655
49-08-4220
Type “Z” grease. For 9070-20, 9071-20,
9072-20.
Type “J” grease. For 9075-20.