EasyGO | SMART KEY SYSTEM UNIVERSAL | Easygo Owners Manual

SMART KEY SYSTEM
UNIVERSAL
Engine Push Start System
Engine Remote Start
Proximity Key Entry
Vehicle Security Alarm
Be fo re o p e ra ti n g yo u r Easygo Sma rtke y syste m,please read this
o w n e r ’ s ma n u a l ca re fu l l y a n d ke e p i t i n yo u r ve h i cl e .
1. Smart Keyless Exit and Entry
1.1 Smart Keyless Exit (Auto arm/lock)
1.2 Smart Keyless Entry (Auto disarm/unlock)
1.3 How to disable Smart Keyless entry/exit function
1.4 Auto Cancel “Smart Keyless entry/exit function”
10
10
SMART KEYLESS EXIT AND ENTRY
1.1 Smart Keyless Exit ( Auto arm/lock)
1.5~3M
Vehicle
Proximity Range
In normal status (system is dis-armed and engine is OFF), when you exit
the vehicle and close the doors, walk away with the smart key from the
vehicle about 1.5 to 3 meters, the doors will lock with one light flash and
one horn chirp. The system will enter into standard security mode (armed)
simultaneously.
Note: Please always make sure that you have the smart key with you
before exiting the vehicle! If you forget to take the smart key with you
and left it inside the vehicle, then the doors will NOT be locked, and
the system will NOT enter into arm mode as the smart key is within
the vehicle proximity range.
If you hear the horn chirp 3 times and see the parking lights flash 1 time
with 5 seconds after closing the vehicle doors, it’s an indication that
some doors are left open !
1.2 Smart Keyless Entry ( Auto disarm/unlock)
1.5~3M
Vehicle
Proximity Range
In arm mode, approach the vehicle with the smart key within the vehicle
range, the system will be disarmed and doors will be unlocked automatically
with 2 lights flashes and 2 horn chirps (no horn chirp, if disarm from mute
security mode).
1.3 How to disable Smart Keyless entry/exit function
In some cases, you may need to cancel the Smart keyless entry/exit function, (For example: when you are washing your
vehicle and have to walk away and close to your vehicle frequently, if you won’t want your vehicle doors shift between lock
and unlock frequently, you’d better cancel the Smart keyless entry/exit function by performing the operation below:
Step 1: With the vehicle in normal status, press and hold the unlock button (button #3) on the smart key for 3 seconds.
The horn will chirp 1 time and parking lights will flash 1 time for confirmation.
Step 2: If you want to enable the Smart Keyless entry/exit function, just repeat Step 1. The horn will chirp 2 times and
the parking lights will flash 2 times for confirmation.
Note: If you disable the “Smart Keyless Entry/Exit Functin”, the “Passive Arming Function” will be automatically
activated to protect your vehicle in case you forget to arm the security system yourself. Please go to Page #9 to read
the details of “Passive Arming Function”.
1.4 Auto Cancel “Smart Keyless entry/exit function”
If there is no smart key or manual operation of system within 36 hours, the Smart Keyless entry/exit function will automatically
shut down to conserve vehicle battery life. When returning to the vehicle, you will have to manually press the unlock button
once to get the Smart Keyless entry/exit function re-activated.
OFF
ACC
ON
enters into “Remote Engine Start Mode” and
If the engine is successfully remote started, the parking lights will flash 10 times and the
horn will chirp 10 times for confirmation. If there is no any other operation performed within 15 minutes
after remote starting the engine, it will be automatically turned OFF.
Note: If the engine fails to be remote started, it will make another 2 attemps. If the 3 attemps all fail,
the system will exit “Remote Engine Start Mode”.
3.1.2 Press the unlock button on the smart key to disarm the vehicle security system and unlock the door
to enter. You will see the parking lights flash 2 times and hear the horn chirp 2 times (no horn chirps if the
system is in mute security mode.)
E
Note: If the vehicle is disarmed, but none of the doors have been opened within 15 seconds, the security
system will regard it as an accidental operation, it will turn OFF the engine and re-arm itself and lock all
the doors for security purpose.
EMERGENCY SYSTEM OVERRIDE (VALET) SENSOR
If the remote Smart Keys are NOT functioning due to drained battery, you can do the
below operations to disarm the security system and push start the engine:
Step 1: The Valet Sensor is mounted on the front windshield of driver side (inside vehicle),
If you are outside of the vehicle when the remote Smart key is NOT functioning, you need
to walk to the front windshield of the vehicle and put the remote Smart keys close to or onto
the part of windshield on which the Valet Sensor is sticke on, then it will disarm the security
system and unlock the doors, so you can enter into the vehicle.
Step 2: After you get into the vehicle, hold the remote Smart Keys up to the Valet Sensor
again, and press the Engine Start/Stop button with foot brake depressed to start the engine.
You can also push the Engine Start/Stop button without pressing foot brake to cycle between
ACC/ON/OFF modes.
Note: You may have to remove the back cover and take the inside battery out as it may
cause intermittent interference.
Normally the above Step 1 will allow you to disarm the security system and unlock the doors to get into the vehicle, but it still have a
chance to fail as some interference may occur or your vehicle windshield glass is extra thick or has been installed with metallic Solar
Film.
If the above Step 1 fails to disarm the sytem and unlock the doors, you can use the provided mechanical spare key to manually unlock
the vehicle from the driver’s door key cylinder to enter into the vehicle, and then go to the above step 2 to push start the engine.
5.1.2 Press the Engine Start/Stop button by 10 times slowly ( wait for 1 second after each press and then give another press, totally
press 10 times.). The warning LED light will turn ON and the parking lights will flash 1 time and the horn will chirp 1 time for confirmation
of entering into “Smart key programming” mode.
5.1.3
5.1.3
4
If the security system is not armed within 15 seconds, it will arm the system and lock
the doors automatically by itself and the parking lights will flash 1 time and the horn
will chirp 1 time for confirmation. This is a safety feature to protect your vehicle in
case you forget to arm the security sytem yourself.
The Passive Arming Function is de-activated by default as the Smartkey System
already has the “Smart keyless entry/exit” function, it will be automatically activated
when the “Smart Keyless entry/exit” function has been disabled.
Useful Tip:
In “Passive Arming Mode”, if you forgot to
take the smart key and left it inside vehicle,
the system can sense it and will NOT lock
it inside. But it’s NOT safe with the doors
unlocked and vehicle disarmed, so please
always make sure that you have the smart
key with you before exiting the vehicle!
CAR SEARCHING
“SMART KEYLESS
ENTRY/EXIT” ON/OFF
/
MUTE SECURITY
10
EASYGO-UNV-OM-V2
COPYRIGHT © 2013 SPACEKEY USA, INC. ALL RIGHTS RESERVED.
Download PDF