Laboratory Safety Equipment

Laboratory Safety Equipment
Laboratory Safety Equipment
As the new millennium continues, WaterSaver Faucet Co.
celebrates sixty-five years of service to the laboratory industry.
From humble origins, we have grown to become the largest
worldwide manufacturer of faucets, valves, safety equipment
and related products for laboratory use. Quality, innovation and
service have been our hallmarks.
All WaterSaver products are manufactured in Chicago, Illinois
USA in two state-of-the-art manufacturing plants. Both
WaterSaver facilities are Gold certified by the U.S. Green Building
Council under the “Leadership in Energy and Environmental
Design” (LEED) program for environmental sustainability and
energy efficiency.
This laboratory safety equipment catalog (LSE015) presents an
overview of our emergency eyewash and shower equipment
product line. The models shown here are representative
of the over 500 products in this product range. For further
information, please refer to a WaterSaver engineering catalog
(EC-010), visit our website (wsflab.com), or consult with our
offices in Chicago, Mexico, England, Dubai, Singapore and China.
All WaterSaver emergency eyewash and shower units are
designed and manufactured to meet or exceed industry
standards, including American National Standards Institute
ANSI/ISEA Z358.1-2014.
We owe our success to the contributions of dedicated
employees and the loyalty of our customers. For over half a
century, we have devoted ourselves to fulfilling the confidence
placed in us by those who buy and use our products. We are
dedicated to continuing that tradition for generations to come.
Steven A. Kersten
President
Table Of Contents
Design Considerations
1
Recessed Laboratory Units
6
Emergency Showers
12
Eye/Face Washes
16
Eyewashes
22
Eyewash/Drench Hose Units
29
Drench Hose Units
31
Safety Stations
32
Faucet-Mounted Eyewashes
36
Tempering Valves
38
Accessories
41
Design Considerations
Finishes
WaterSaver laboratory safety equipment is furnished with a polished chrome plated finish as standard. In addition, WaterSaver offers
a range of additional optional finishes to meet the requirements of every laboratory environment. The choice of finish depends upon
requirements for chemical resistance and the particular “look and feel” desired for the laboratory installation.
Three optional plated finishes with clear epoxy coating are shown below. Equipment can also be furnished with a colored epoxy power
coated finish. Please refer to the WaterSaver website (wsflab.com) for complete information.
Polished Chrome Finish with Clear Epoxy Coating (PCL)
In many lab environments, a polished chrome plated finish will not
withstand corrosion when exposed to acids, solvents and other materials
used in the lab. For these applications, WaterSaver offers a chemical resistant
clear epoxy coating that is applied over the chrome plating. Individual
components are polished and buffed to a smooth surface, then electroplated
with one layer of nickel and one layer of chrome. Following plating,
components are coated with a clear epoxy coating. The clear coating provides
the fittings with enhanced chemical resistance and ensures durability.
Satin Chrome Finish with Clear Epoxy Coating (SCC)
Polished chrome finishes tend to show fingerprints, watermarks, dust
and dirt. In a typical laboratory, few people will take the time to clean the
fittings to preserve their appearance. As a result, the service fixtures and
safety equipment can become unsightly very quickly.
WaterSaver offers two satin (brushed) finishes with clear epoxy
coating that address this concern. Satin chrome products with clear
epoxy coating have a silver/blue hue that is similar to the appearance
of stainless steel. Offering superior chemical resistance due to the
epoxy coating, these products will not show fingerprints, watermarks
or smudges. The products will enhance the appearance of the lab
environment.
Satin Nickel Finish with Clear Epoxy Coating (SNC)
Laboratory service fixtures and safety equipment with a satin nickel finish
with clear epoxy coating address the concerns noted above regarding
fingerprints, watermarks, etc. The satin nickel finish has a slight yellow hue
that is almost indistinguishable from stainless steel.
Note: Products with a polished chrome plated finish are available at published prices and at standard lead times. Products with
optional finishes must be factory ordered and thus may have longer lead times. In addition, these products may command an
upcharge in price, so pricing should be confirmed at time of order.
WaterSaver Faucet Co.
wsflab.com
1
Design Considerations
OSHA regulations, safe work practices and common sense demand that, where workers are handling potentially dangerous chemicals
or other materials, the workplace be equipped with equipment for rinsing the eyes, face or body in case an accident occurs. While
this seems like a simple matter, selecting, installing, using, and maintaining emergency equipment can be complicated. A variety of
considerations – ranging from design issues such as tepid water and drainage to differences in equipment performance – make the
process complex.
This catalog contains engineering and technical data on WaterSaver laboratory safety products. In addition, this catalog is intended to
serve as a reference manual for the proper selection, installation, use and maintenance of emergency eyewash and shower equipment.
Hopefully, the information contained in this catalog will assist our customers in constructing a comprehensive emergency equipment
program.
Emergency Equipment as the “Third Line of Defense”
While emergency equipment is a necessary part of a safe work environment, it must be emphasized that it is only the “third line of
defense” for workers in such environments. The first line of defense must always be setting up the work area and designing the work
flow and processes to minimize the possibility of an accident occurring. Many factors go into making a workplace safe. However,
practices such as storing hazardous materials in proper containers, marking the containers clearly and accurately, and keeping the
workplace clean and well organized can have a significant impact on minimizing the likelihood of an accident occurring.
The “second line of defense” for workers is assuring that, when workers do have to handle dangerous materials, personal protective
equipment is provided and used. Proper protective clothing, gloves and eye protection (such as goggles and face shields) can change a
potentially life-threatening spill into a harmless event.
However, even where work processes have been designed to minimize the possibility of an accident, and even where proper protective
equipment is in use, it is still possible that an accident can occur. For this reason, it is necessary that effective, functioning emergency
eyewash and shower equipment be provided.
OSHA Requirements
Constructing an emergency equipment program begins with a review of the OSHA requirements for such equipment. OSHA has
developed a series of regulations that require the use of emergency eyewash and shower equipment as a form of first aid treatment.
The broadest requirement for eyewash and shower usage is found in 29 CFR 1910.151, which states that “where the eyes or body of any
person may be exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body shall be
provided within the work area for immediate emergency use.”
This regulation requires that, anywhere there is a risk of a worker being injured by contact with harmful materials, the employer must
provide a means for immediate rinsing away of such materials. The equipment for rinsing the contaminants must be suitable for that
use, located within the work area, and able to be utilized immediately in the event of an emergency. The regulation does not, however,
specify what constitutes “suitable facilities” for drenching or flushing the eyes and body. The employer is free to select the equipment
which is best suited for the type of workplace and the type of risk involved.
In addition to this general requirement, OSHA has also adopted regulations that are applicable to particular workplaces and work
activities. The following are areas that are specifically addressed by OSHA:
• Powered Industrial Trucks (29 CFR 1910.178 (g) (2)) • Pulp, Paper and Paperboard Mills (29 CFR 1910.261 (g) (18))
• Telecommunications (29 CFR 1910.268 (b) (2))
• Activities Utilizing an Open Surface Tank (29 CFR 1910.94 (d) (9) (vii))
• Storage and Handling of Anhydrous Ammonia (29 CFR 1910.111 (a) (9) (iii, iv))
2
WaterSaver Faucet Co.
wsflab.com
Design Considerations
ANSI Standard Z358.1
The OSHA regulations listed in 29 CFR determine where and when emergency eyewash and shower equipment must be installed.
These regulations do not, however, specify design characteristics or minimum performance levels for this equipment. The American
National Standards Institute has adopted ANSI Standard Z358.1 “Emergency Eyewash and Shower Equipment” to address these issues.
This standard serves as a guide for the proper design, performance and installation of emergency equipment to comply with OSHA
regulations. The standard was most recently updated in 2014.
WaterSaver offers an ANSI Z358.1-2014 “Compliance Checklist”. This checklist summarizes and graphically presents the provisions
of ANSI Z358.1-2014 with respect to each type of emergency equipment. The checklist can be used to assist in the proper selection,
installation and maintenance of emergency equipment. It can also be used in performing an audit of existing emergency equipment.
Design Issues
There are several important design issues that must always be addressed when selecting and installing emergency equipment. These
include the following:
Location
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the
location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment
should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of
obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles
to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers
are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious,
emergency equipment should be installed immediately adjacent to the hazard.
Laboratory environments also require special consideration. It is common in many laboratory buildings to install emergency
equipment in a corridor or hallway outside of the lab room. This may satisfy the provisions of the standard but still not provide
workers with immediate access to emergency equipment. In these cases, consideration should be given to installing dual
purpose eyewash/drench hose units at lab sinks. These units are highly accessible and versatile. They provide immediate
protection for the eyes, face or body when a spill involves a relatively small amount of hazardous material. Please refer to the
“Eyewash/Drench Hose” section of this catalog for further information.
Water Supply
Proper operation of emergency equipment requires the availability of a large and continuous supply of potable water. The
water supply must, at a minimum, be capable of delivering the volumes of water required by the ANSI standard. Piping should
be at least as large as the inlet size of the unit to be installed. The water supply line must also be capable of delivering an
uninterruptible flow of water of at least 30 PSI flow pressure.
Water Temperature
The ANSI standard provides that the water delivered by emergency equipment be “tepid” (that is, moderately warm or
lukewarm). Tepid water is generally defined as between 60° (15° C) and 90° F (32°C) . However, where it is possible that a
chemical reaction might be accelerated by warm water, a medical professional should be consulted to determine what the
optimum water temperature would be.
The delivery of tepid water to emergency equipment may raise complicated engineering issues. In geographical areas subject
to cold weather, the water supplied by public water systems can be quite cold, at times just above freezing. Providing tepid
water requires heating the cold water or blending it with hot water to achieve a desirable temperature. Conversely, in warm
areas of the country, water standing in pipelines can be heated to a very hot temperature. Providing tempered water would
then involve chilling the water or adding cold water to the water supply line.
WaterSaver Faucet Co.
wsflab.com
3
Design Considerations
Water Temperature (cont’d)
There are several ways to design a water supply system to address the tepid water requirement. First, it is possible to provide both
hot and cold water supply lines to each location at which emergency equipment is installed. This is typically done in facilities
(such as laboratory buildings and schools) where hot and cold water systems are installed throughout the building. At each
emergency unit, a tempering valve would be installed to blend the hot and cold water to a preset temperature. The tempering
valve must be specially designed for use with emergency equipment, since these valves have dual built-in safety features. In the
event that there is an interruption in the hot water supply, the valve will still deliver a full flow of cold water to the equipment. If
there is an interruption in the cold water supply, the valve will shut off the water entirely to eliminate the possibility of scalding.
Please refer to the “Tempering Valves” section of this catalog for information on WaterSaver tempering valves.
The second way to address the tepid water issue is to install a recirculating tepid water system. This system can supply
multiple emergency equipment stations. The system continually recirculates warm water to each location. If one or more
units are activated, the system will automatically blend hot and cold water and add it to the water line to supply the units.
These systems must be sized and engineered for the particular facility in which they are to be installed. It is therefore
common to consult with the emergency equipment manufacturer during the design process. Please contact our regional sales
representatives or the factory for information on recirculating tempered water systems.
Water Disposal
The ANSI standard does not include any provisions regarding the disposal of waste water. However, consideration must be
given to where waste water will go. In particular, care must be taken that waste water not create a hazard, by creating a pool in
which someone might slip.
Most eyewash, eye/face wash and safety station units are designed with waste outlets for connection to drain piping.
WaterSaver recommends that units be connected to drain piping. For emergency showers and for other units without waste
connections, floor drains should be provided. Floor drains are important for two reasons. First, emergency showers deliver
a very high volume of water. This volume can cause significant water damage to the facility if drains are not provided. This
concern is heightened where there is a possibility that units might be inadvertently operated. Second, the absence of drainage
may be a deterrent to routine testing of emergency equipment. The testing process is more difficult if waste water must be
manually collected and removed.
After an emergency eyewash or shower has been used, the waste water may contain hazardous materials that cannot or
should not be introduced into a sanitary sewer system. It may be necessary to connect the drain piping from the emergency
equipment or floor drain to the building’s acid waste disposal system or to a neutralizing tank.
Handicapped Accessibility
The Americans with Disabilities Act (ADA) mandates that workplaces be accessible to and usable by physically handicapped
persons. Making workplaces accessible to handicapped persons has had an impact on how facilities are designed and the
equipment installed in facilities. With respect to emergency equipment, ADA regulations impose requirements for maximum
heights and reach, the types of actuators that are permitted, etc. WaterSaver offers specialized “barrier-free” products that will
assist in complying with governmental regulations (28 CFR Part 36) and compliance standards (ANSI 117.1-1-1992). Each barrierfree product is identified as such in this catalog.
4
WaterSaver Faucet Co.
wsflab.com
Design Considerations
Identification
ANSI Z358.1 provides that emergency units should be identified with highly visible signs. Without appropriate signage,
emergency equipment can blend into the background of the surrounding area and be difficult to locate in an emergency. The
signs used with emergency equipment should comply with the provisions of ANSI Z535.1 through ANSI Z535.5, utilizing a white
background with green lettering. Graphics and lettering should be of the correct size and format. WaterSaver supplies an
ANSI-compliant sign with every emergency eyewash and shower unit.
In addition to identification with appropriate signage, the emergency equipment itself should be designed to provide
maximum visibility. WaterSaver safety stations are furnished with safety orange polyethylene covers for the piping. In addition
to protecting the piping against corrosion, the orange covers assure that the equipment will be visible and readily identified in
an industrial plant.
Finally, the ANSI standard recommends that the area around emergency equipment be well lighted. WaterSaver alarm units
(see below) can be equipped with area lights to provide the necessary lighting.
Alarm Systems
Alarm systems are advisable for emergency equipment, particularly in remote locations or areas where only one employee
might be working. Alarm systems serve two important functions. First, they serve to alert facility personnel that an accident
has occurred and that a unit is in operation. This can help to insure that assistance is rendered as quickly as possible. Second,
alarm systems can be a deterrent to unintended or malicious operation of a safety unit.
Alarm systems incorporate a flow switch installed in the water supply line to an emergency unit with a visual indicator
light and audible alarm. When the unit is activated, the flow switch detects the movement of water in the line and sends a
signal that activates the light and horn. In addition, the alarm can relay the same signal to a monitoring station or building
management system. Please refer to the “Accessories - Alarms” section of this catalog for complete information.
Post-Installation Considerations
Simply installing emergency equipment is not a sufficient means of insuring worker safety. Employees must be trained in the location
of emergency equipment and in its proper use. In particular, workers must be trained that, in event of an emergency, the affected area
should be rinsed for at least fifteen minutes to assure that contaminants are rinsed away thoroughly and completely.
Most importantly, employers must develop a response plan to be used in the event that an accident does occur. The focus of the
response plan should be to provide assistance to the injured worker as quickly as possible.
Finally, all emergency equipment must be activated at least weekly to assure proper operation. A testing log should be maintained
to document the weekly check. At least annually, emergency equipment must be inspected to assure continued compliance with the
ANSI standard.
WaterSaver Faucet Co.
wsflab.com
5
Recessed Laboratory Units – Safety Stations
SSBF2150
Recessed Safety Station with Drain Pan,
Exposed Shower Head
Application: Recessed eye/face wash and shower safety station
with ceiling mounted exposed shower head.
ADA Compliance: When installed at recommended mounting
heights, unit complies with ADA requirements for accessibility by
handicapped persons.
Mounting: 16 gauge stainless steel cabinet with flanged rim for
recessed mounting in wall. Unit fits in 3-5/8" (92mm) deep wall.
Shower Head: 10" (254mm) diameter stainless steel. Furnished
with vertical supply pipe and ceiling escutcheon.
Shower Valve: 1" IPS brass stay-open ball valve with stainless steel
“panic bar” actuator.
Cover/Drain Pan: 16 gauge stainless steel combination cover and
drain pan. Grasping “panic bar” handle and opening cover pulls
spray head assembly down from vertical to horizontal position,
activating water flow. While unit is in operation, waste water is
collected in drain pan and returned into cabinet for drainage.
Unit remains in operation until cover is returned to closed
position.
Eye/Face Wash Spray Head Assembly: Two FS-Plus™ spray heads
mounted on supply arms. Each spray head has individually
adjustable flow control and filter to remove impurities from
water.
Eye/Face Wash Valve: 1/2" IPS brass plug-type valve with O-ring
seals. Furnished with in-line strainer to protect valve and spray
heads from debris in water line.
Pipe and Fittings: Exposed pipe and escutcheon are
stainless steel.
Supply: 1" NPT female inlet.
Waste: 2" NPT female outlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Unit is assembled and water tested
prior to shipment. Unit is third-party certified to comply with
ANSI Z358.1-2014.
U.S. Patent 5,768,721
Note: Shown with optional AP280-235 electric light and alarm
horn unit (sold separately).
Additional Model
SSBF2152 Same as above
except with “daylight
drain” for waste water on
front of unit.
6
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
Optional Features:
{{ 20 GPM flow control for shower head (add suffix “FC20”).
Accessories:
{{ Modesty curtain to provide privacy for user to disrobe while
using emergency shower (order AP250-065).
{{ Electric light and alarm horn assembly to notify personnel
that unit is in use (order AP280-235).
{{ AP3800 thermostatic mixing valve blends hot and cold
water to deliver tepid water as provided by ANSI Z358.1-2014
(add suffix “TMV”). Refer to “Tempering Valves” section for
complete technical information.
WaterSaver Faucet Co.
wsflab.com
Recessed Laboratory Units – Safety Stations
SSBF2160
Recessed Safety Station with Drain Pan,
Recess Mounted Shower Head
Application: Recessed eye/face wash and shower safety station
with ceiling mounted recessed shower head.
ADA Compliance: When installed at recommended mounting
heights, unit complies with ADA requirements for accessibility by
handicapped persons.
Mounting: 16 gauge stainless steel cabinet with flanged rim for
recessed mounting in wall. Unit fits in 3-5/8" (92mm) deep wall.
Shower Head: 10" (254mm) diameter stainless steel with flanged
rim for recessed mounting in ceiling.
Shower Valve: 1" IPS brass stay-open ball valve with stainless steel
“panic bar” actuator.
Cover/Drain Pan: 16 gauge stainless steel combination cover and
drain pan. Grasping “panic bar” handle and opening cover pulls
spray head assembly down from vertical to horizontal position,
activating water flow. While unit is in operation, waste water is
collected in drain pan and returned into cabinet for drainage.
Unit remains in operation until cover is returned to closed
position.
Eye/Face Wash Spray Head Assembly: Two FS-Plus™ spray heads
mounted on supply arms. Each spray head has individually
adjustable flow control and filter to remove impurities from
water.
Eye/Face Wash Valve: 1/2" IPS brass plug-type valve with O-ring
seals. Furnished with in-line strainer to protect valve and spray
heads from debris in water line.
Supply: 1" NPT female inlet.
Waste: 2" NPT female outlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Unit is assembled and water tested
prior to shipment. Unit is third-party certified to comply with
ANSI Z358.1-2014.
Note: ANSI Z358.1-2014 provides that shower heads be
installed no more than 96” above the finished floor. This
unit should therefore not be installed in ceilings or soffits
over 8 feet. For higher ceiling heights, we recommend the SSBF2150
or SSBF2170 units.
Note: Shown with optional AP280-235 electric light and alarm
horn unit (sold separately).
Additional Model
SSBF2162 Same as above
except with “daylight
drain” for waste water on
front of unit.
WaterSaver Faucet Co.
wsflab.com
U.S. Patent 5,768,721
Optional Features:
{{ 20 GPM flow control for shower head (add suffix “FC20”).
Accessories:
{{ Modesty curtain to provide privacy for user to disrobe while
using emergency shower (order AP250-065).
{{ Electric light and alarm horn assembly to notify personnel
that unit is in use (order AP280-235).
{{ AP3800 thermostatic mixing valve blends hot and cold
water to deliver tepid water as provided by ANSI Z358.1-2014
(add suffix “TMV”). Refer to “Tempering Valves” section for
complete technical information.
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
7
Recessed Laboratory Units – Safety Stations
SSBF2170
Recessed Safety Station with Drain Pan, Wall Mounted Shower Head
Application: Recessed eye/face wash and shower safety station
with wall mounted exposed shower head.
ADA Compliance: When installed at recommended mounting
heights, unit complies with ADA requirements for accessibility by
handicapped persons.
Mounting: 16 gauge stainless steel cabinet with flanged rim for
recessed mounting in wall. Unit fits in 3-5/8" (92mm) deep wall.
Shower Head: 10" (254mm) diameter stainless steel. Furnished
with horizontal supply pipe and wall escutcheon.
Shower Valve: 1" IPS brass stay-open ball valve with stainless steel
“panic bar” actuator.
Cover/Drain Pan: 16 gauge stainless steel combination cover and
drain pan. Grasping “panic bar” handle and opening cover pulls
spray head assembly down from vertical to horizontal position,
activating water flow. While unit is in operation, waste water is
collected in drain pan and returned into cabinet for drainage.
Unit remains in operation until cover is returned to closed
position.
Eye/Face Wash Spray Head Assembly: Two FS-Plus™ spray heads
mounted on supply arms. Each spray head has individually
adjustable flow control and filter to remove impurities from
water.
Eye/Face Wash Valve: 1/2" IPS brass plug-type valve with O-ring
seals. Furnished with in-line strainer to protect valve and spray
heads from debris in water line.
Pipe and Fittings: Exposed pipe and escutcheon are
stainless steel.
Supply: 1" NPT female inlet.
Waste: 2" NPT female outlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Unit is assembled and water tested
prior to shipment. Unit is third-party certified to comply with
ANSI Z358.1-2014.
U.S. Patent 5,768,721
Note: Shown with optional AP280-235 electric light and alarm
horn unit (sold separately).
Additional Model
SSBF2172 Same as above
except with “daylight
drain” for waste water on
front of unit.
8
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
Optional Features:
{{ 20 GPM flow control for shower head (add suffix “FC20”).
Accessories:
{{ Modesty curtain to provide privacy for user to disrobe while
using emergency shower (order AP250-065).
{{ Electric light and alarm horn assembly to notify personnel
that unit is in use (order AP280-235).
{{ AP3800 thermostatic mixing valve blends hot and cold
water to deliver tepid water as provided by ANSI Z358.1-2014
(add suffix “TMV”). Refer to “Tempering Valves” section for
complete technical information.
WaterSaver Faucet Co.
wsflab.com
Recessed Laboratory Units – Emergency Showers
ESBF670
Recessed Emergency Shower, Exposed Shower Head
Application: Recessed emergency shower with ceiling mounted
exposed shower head.
ADA Compliance: When installed at recommended mounting
heights, unit complies with ADA requirements for accessibility by
handicapped persons.
Shower Head: 10" (254mm) diameter stainless steel. Furnished
with vertical supply pipe and ceiling escutcheon.
Valve: 1" IPS brass stay-open ball valve with stainless steel
“panic bar." Pulling bar down activates shower; shower remains
in operation until bar is returned to original closed position.
Furnished with stainless steel access panel and 1” IPS unions for
valve.
Pipe and Fittings: Exposed pipe and escutcheon are stainless
steel.
Supply: 1” NPT female inlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Unit is assembled and water tested
prior to shipment. Unit is third-party certified to comply with
ANSI Z358.1-2014.
U.S. Patent 5,768,721
See SSBF672 for description of available options and accessories.
ESBF671
Recessed Emergency Shower, Recess Mounted Shower Head
Application: Recessed emergency shower with ceiling mounted
recessed shower head.
ADA Compliance: When installed at recommended mounting
heights, unit complies with ADA requirements for accessibility by
handicapped persons.
Shower Head: 10” (254mm) diameter stainless steel with flanged
rim for recessed mounting in ceiling.
Valve: 1" IPS brass stay-open ball valve with stainless steel
“panic bar." Pulling bar down activates shower; shower remains
in operation until bar is returned to original closed position.
Furnished with stainless steel access panel and 1” IPS unions for
valve.
Supply: 1” NPT female inlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Unit is assembled and water tested
prior to shipment. Unit is third-party certified to comply with
ANSI Z358.1-2014.
Note: ANSI Z358.1-2014 provides that shower heads be
installed no more than 96” above the finished floor. This
unit should therefore not be installed in ceilings or soffits
over 8 feet. For higher ceiling heights, we recommend the ESBF670
or ESBF672 units.
U.S. Patent 5,768,721
See SSBF672 for description of available options and accessories.
WaterSaver Faucet Co.
wsflab.com
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
9
Recessed Laboratory Units – Emergency Showers
ESBF672
Recessed Emergency Shower, Wall Mounted Shower Head
Application: Recessed emergency shower with wall mounted
exposed shower head.
ADA Compliance: When installed at recommended mounting
heights, unit complies with ADA requirements for accessibility by
handicapped persons.
Shower Head: 10" (254mm) diameter stainless steel. Furnished
with horizontal supply pipe and wall escutcheon.
Valve: 1" IPS brass stay-open ball valve with stainless steel
“panic bar." Pulling bar down activates shower; shower remains
in operation until bar is returned to original closed position.
Furnished with stainless steel access panel and 1” IPS unions for
valve.
Pipe and Fittings: Exposed pipe and escutcheon are stainless
steel.
Supply: 1” NPT female inlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Unit is assembled and water tested
prior to shipment. Unit is third-party certified to comply with
ANSI Z358.1-2014.
U.S. Patent 5,768,721
Optional Features:
{{ 20 GPM flow control for shower head (add suffix “FC20”).
Accessories:
{{ Modesty curtain to provide privacy for user to disrobe while
using emergency shower (order AP250-065).
{{ Electric light and alarm horn assembly to notify personnel
that unit is in use (order AP280-235).
{{ AP3800 thermostatic mixing valve blends hot and cold
water to deliver tepid water as provided by ANSI Z358.1-2014
(add suffix “TMV”). Refer to “Tempering Valves” section for
complete technical information.
10
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
WaterSaver Faucet Co.
wsflab.com
Recessed Laboratory Units – Eye/Face Washes
FEBF735DP
Recessed Eye/Face Wash with Drain Pan
Application: Recessed swing-down eye/face wash with drain pan.
ADA Compliance: When installed at recommended mounting
heights, unit complies with ADA requirements for accessibility by
handicapped persons.
Mounting: 16 gauge stainless steel cabinet with flanged rim for
recessed mounting in wall. Unit fits in 3-5/8" (92mm) deep wall.
Cover/Drain Pan: 16 gauge stainless steel combination cover and
drain pan. Grasping “panic bar” handle and opening cover pulls
spray head assembly down from vertical to horizontal position,
activating water flow. While unit is in operation, waste water is
collected in drain pan and returned into cabinet for drainage.
Unit remains in operation until cover is returned to closed
position.
Spray Head Assembly: Two FS-Plus™ spray heads mounted on
supply arms. Each spray head has individually adjustable flow
control and filter to remove impurities from water.
Valve: 1/2" IPS brass plug-type valve with O-ring seals. Furnished
with in-line strainer to protect valve and spray heads from debris
in water line.
Supply: 1/2" NPT female inlet.
Waste: 2" NPT female outlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Unit is assembled and water tested prior
to shipment. Unit is third-party certified to comply with ANSI
Z358.1-2014.
Additional Model:
{{ FEBF735FDP Same as above except with “daylight drain” for
waste water on front of unit.
Accessories:
{{ Electric light and alarm horn assembly to notify personnel
that unit is in use (order AP285-235).
{{ AP3600 thermostatic mixing valve blends hot and cold
water to deliver tepid water as provided by ANSI Z358.1-2014
(add suffix “TMV”). Refer to “Tempering Valves” section for
complete technical information.
WaterSaver Faucet Co.
wsflab.com
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
11
Emergency Showers
ES629
Emergency Shower, Recess Mounted
Application: Emergency shower for recessed mounting in a
finished ceiling or soffit.
Shower Head: 10" (254mm) diameter stainless steel with flanged
rim for flush mounting in ceiling.
Valve: 1" IPS brass stay-open ball valve. Valve is US-made with
chrome plated brass ball and PTFE seals. Furnished with stainless
steel actuating arm, 43" stainless steel pull rod and stainless steel
ceiling guide plate.
Pipe and Fittings: 1" IPS galvanized steel.
Supply: 1" NPT female inlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Unit is third-party certified to comply with
ANSI Z358.1-2014.
Note: ANSI Z358.1-2014 provides that shower heads be installed no
more than 96" above the finished floor. This unit should therefore
not be installed in ceilings over 8 feet. For higher ceilings, we
recommend the ES658 shower (see below).
ES658
Emergency Shower, Semi-Recessed Ceiling Mounted
Application: Emergency shower for semi-recessed mounting in a
finished ceiling. Unit is designed for installation in ceilings 8 - 10
feet above the finished floor.
Shower Head: 10" (254mm) diameter stainless steel. Furnished
with stainless steel vertical supply pipe and ceiling escutcheon.
Valve: 1" IPS brass stay-open ball valve. Valve is US-made with
chrome plated brass ball and PTFE seals. Furnished with stainless
steel actuating arm, 63-1/2" stainless steel pull rod and stainless
steel ceiling guide plate.
Pipe and Fittings: Exposed pipe and escutcheon are 1" IPS
stainless steel. Other pipe and fittings are 1" IPS galvanized steel.
Supply: 1" NPT female inlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Unit is third-party certified to comply with
ANSI Z358.1-2014.
Optional Features:
{{ 20 GPM flow control for shower head (add suffix “FC20”).
12
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
Accessories:
{{ Electric light and alarm horn assembly to notify personnel
that unit is in use (order AP280-235).
{{ AP3800 thermostatic mixing valve blends hot and cold
water to deliver tepid water as provided by ANSI Z358.1-2014
(add suffix “TMV”). Refer to “Tempering Valves” section for
complete technical information.
WaterSaver Faucet Co.
wsflab.com
Emergency Showers
ES635
Emergency Shower, Vertically Mounted
Application: Emergency shower for vertical mounting.
Shower Head: 10" (254mm) diameter safety orange ABS plastic.
Valve: 1" IPS chrome plated brass stay-open ball valve. Valve
is US-made with chrome plated brass ball and PTFE seals.
Furnished with stainless steel actuating arm and 29" stainless
steel pull rod.
Supply: 1" NPT female inlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Unit is third-party certified to comply with
ANSI Z358.1-2014.
ES692
Emergency Shower, Vertically Mounted, All-Stainless Steel
Application: All-stainless steel emergency shower for vertical
mounting.
Shower Head: 10" (254mm) diameter stainless steel.
Valve: 1" IPS stainless steel stay-open ball valve. Valve has
stainless steel ball and PTFE seals. Furnished with stainless steel
actuating arm and 29" stainless steel pull rod.
Supply: 1" NPT female inlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Unit is third-party certified to comply with
ANSI Z358.1-2014.
Optional Features:
{{ Safety green ABS plastic shower head (add suffix “GRN”)
{{ Safety yellow ABS plastic shower head (add suffix “YEL”)
{{ Stainless steel shower head (add suffix “SSH”)
{{ 20 GPM flow control for shower head (add suffix “FC20”)
WaterSaver Faucet Co.
wsflab.com
Accessories:
{{ Electric light and alarm horn assembly to notify personnel
that unit is in use (order AP280-205).
{{ AP3800 thermostatic mixing valve blends hot and cold
water to deliver tepid water as provided by ANSI Z358.1-2014
(add suffix “TMV”). Refer to “Tempering Valves” section for
complete technical information.
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
13
Emergency Showers
ES643
Application: Emergency shower for horizontal mounting.
Emergency Shower, Horizontally Mounted
Shower Head: 10" (254mm) diameter safety orange ABS plastic.
Valve: 1" IPS chrome plated brass stay-open ball valve. Valve
is US-made with chrome plated brass ball and PTFE seals.
Furnished with stainless steel actuating arm and 29" stainless
steel pull rod.
Pipe and Fittings: 1" IPS galvanized steel nipple with orange ABS
plastic elbow.
Supply: 1" NPT female inlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Unit is third-party certified to comply with
ANSI Z358.1-2014.
ES691
Emergency Shower, Horizontally Mounted, All-Stainless Steel
Application: All-stainless steel emergency shower for horizontal
mounting.
Shower Head: 10" (254mm) diameter stainless steel.
Valve: 1" IPS stainless steel stay-open ball valve. Valve has
stainless steel ball and PTFE seals. Furnished with stainless steel
actuating arm and 29" stainless steel pull rod.
Pipe and Fittings: 1" IPS stainless steel nipple and elbow.
Supply: 1" NPT female inlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Unit is third-party certified to comply with
ANSI Z358.1-2014.
Optional Features:
{{ Safety green ABS plastic shower head (add suffix “GRN”)
{{ Safety yellow ABS plastic shower head (add suffix “YEL”)
{{ Stainless steel shower head (add suffix “SSH”)
{{ 20 GPM flow control for shower head (add suffix “FC20”)
14
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
Accessories:
{{ Electric light and alarm horn assembly to notify personnel
that unit is in use (order AP280-205).
{{ AP3800 thermostatic mixing valve blends hot and cold
water to deliver tepid water as provided by ANSI Z358.1-2014
(add suffix “TMV”). Refer to “Tempering Valves” section for
complete technical information.
WaterSaver Faucet Co.
wsflab.com
Emergency Showers – Barrier-Free
ESBF643
Barrier-Free Emergency Shower, Horizontally Mounted
Application: Barrier-free emergency shower for horizontal
mounting.
ADA Compliance: When installed at recommended mounting
height, unit complies with ADA requirements for accessibility by
handicapped persons (maximum height and reach and distance
from obstructions).
Mounting: Unit should be installed so that shower head is at
least 82” above floor and 32” from wall or nearest obstruction.
Shower Head: 10" (254mm) diameter safety orange ABS plastic.
Valve: 1" IPS chrome plated brass stay-open ball valve. Valve is
US-made with chrome plated brass ball and PTFE seals. Furnished
with stainless steel actuating arm and 59-1/2" stainless steel pull
rod.
Pipe and Fittings: 1" IPS galvanized steel nipple with orange ABS
plastic elbow.
Supply: 1" NPT female inlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Unit is third-party certified to comply with
ANSI Z358.1-2014.
ESBF658
Barrier-Free Emergency Shower,
Semi-Recessed, Ceiling Mounted
Application: Barrier-free emergency shower for semi-recessed
mounting in a finished ceiling.
ADA Compliance: When installed at recommended mounting
heights, unit complies with ADA requirements for accessibility by
handicapped persons (maximum height and reach and distance
from obstructions).
Mounting: Unit is designed for installation in ceilings 8-10 feet
above finished floor. Unit should be installed so that shower
head is at least 82” above floor and 32” from wall or nearest
obstruction.
Shower Head: 10" (254mm) diameter stainless steel. Furnished
with stainless steel vertical supply pipe and ceiling escutcheon.
Valve: 1" IPS brass stay-open ball valve. Valve is US-made with
chrome plated brass ball and PTFE seals. Furnished with stainless
steel actuating arm, 63-1/2" stainless steel pull rod and stainless
steel ceiling guide plate.
Pipe and Fittings: Exposed pipe and escutcheon are 1" IPS
stainless steel. Other pipe and fittings are 1" IPS galvanized steel.
Supply: 1" NPT female inlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Unit is third-party certified to comply with
ANSI Z358.1-2014.
Optional Features:
{{ Safety green ABS plastic shower head (add suffix “GRN”)
{{ Safety yellow ABS plastic shower head (add suffix “YEL”)
{{ Stainless steel shower head (add suffix “SSH”)
{{ 20 GPM flow control for shower head (add suffix “FC20”)
WaterSaver Faucet Co.
wsflab.com
Accessories:
{{ Electric light and alarm horn assembly to notify personnel
that unit is in use (for ESBF643, order AP280-205; for ESBF658,
order AP280-235).
{{ AP3800 thermostatic mixing valve blends hot and cold
water to deliver tepid water as provided by ANSI Z358.1-2014
(add suffix “TMV”). Refer to “Tempering Valves” section for
complete technical information.
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
15
Eye/Face Washes
FE724
Eye/Face Wash, Wall Mounted
Application: WideArea™ eye/face wash for wall mounting. Four
GS-Plus™ spray heads deliver a flood of water over a wide area of
coverage for complete rinsing of eyes and face.
Mounting: Cast aluminum wall bracket with epoxy powder
coated finish.
Spray Head Assembly: Four GS-Plus™ spray heads. Each head has
a “flip top” dust cover, internal flow control and filter to remove
impurities from the water flow.
Valve: 1/2" IPS chrome plated brass stay-open ball valve. Valve is
US-made with chrome plated brass ball and PTFE seals.
Bowl: 11-1/2" (292mm) diameter stainless steel.
Supply: 1/2" NPT female inlet.
Waste: 1-1/4" NPT female outlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Unit is fully assembled and water tested
prior to shipment. Unit is third-party certified to comply with
ANSI Z358.1-2014.
FE727
Eye/Face Wash, Recessed Deck Mounted
Application: WideArea™ eye/face wash for recessed mounting in
countertop. Four GS-Plus™ spray heads deliver a flood of water
over a wide area of coverage for complete rinsing of eyes and face.
Spray Head Assembly: Four GS-Plus™ spray heads. Each head has
a “flip top” dust cover, internal flow control and filter to remove
impurities from the water flow.
Valve: 1/2" IPS brass stay-open ball valve. Valve is mounted on
aluminum angle bracket below counter and activated by pushdown knob.
Bowl: 13” (330mm) diameter stainless steel with flanged rim for
mounting in countertop. Furnished with all hardware necessary
for installation in counter.
Supply: 1/2" NPT male inlet.
Waste: 1-1/4" NPT female outlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Unit is assembled and water tested
prior to shipment. Unit is third-party certified to comply with
ANSI Z358.1-2014.
Optional Features:
{{ Stainless steel dust cover for each spray head (add suffix “DC”)
{{ Green ABS plastic bowl (add suffix “GRN”)
{{ Yellow ABS plastic bowl (add suffix “YEL”)
{{ Chrome plated brass tailpiece and trap with 1-1/2” IPS waste
connection (add suffix “T”)
{{ 1-1/2” OD chrome plated brass tailpiece (add suffix “TP”)
16
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
Accessories:
{{ AP3600 thermostatic mixing valve blends hot and cold
water to deliver tepid water as provided by ANSI Z358.1-2014
(add suffix “TMV”). Refer to “Tempering Valves” section for
complete technical information.
WaterSaver Faucet Co.
wsflab.com
Eye/Face Washes – Barrier-Free
FEBF721
Eye/Face Wash, Wall Mounted, Barrier-Free
Application: Barrier-free WideArea™ eye/face wash for wall
mounting.
ADA Compliance: Bowl is lowered and extended to permit access
by wheelchair user. Profile of unit is “flattened” to comply with
maximum height and knee clearance requirements. When
installed at recommended mounting height, unit complies with
ADA requirements for accessibility by handicapped persons.
Mounting: Wall-mounted bowl unit has welded stainless steel
wraparound skirt to conceal valve, drain and piping.
Spray Head Assembly: Four GS-Plus™ spray heads. Each head has
a “flip top” dust cover, internal flow control and filter to remove
impurities from the water flow.
Valve: 1/2" IPS brass stay-open ball valve. Valve is US-made with
chrome plated brass ball and PTFE seals.
Bowl: 11-1/2" (292mm) diameter stainless steel bowl.
Supply: 1/2" NPT female inlet.
Waste: 1-1/2" OD chrome plated brass tailpiece.
Sign: Furnished with universal identification sign.
Quality Assurance: Unit is fully assembled and water tested
prior to shipment. Unit is third-party certified to comply with
ANSI Z358.1-2014.
FEBF724
Eye/Face Wash, Wall Mounted, Barrier-Free
Application: Barrier-free WideArea™ eye/face wash for wall
mounting.
ADA Compliance: Bowl is lowered and extended to permit access
by wheelchair user. Profile of unit is “flattened” to comply with
maximum height and knee clearance requirements. When
installed at recommended mounting height, unit complies with
ADA requirements for accessibility by handicapped persons.
Mounting: Welded stainless steel bracket for wall mounting.
Spray Head Assembly: Four GS-Plus™ spray heads. Each head has
a “flip top” dust cover, internal flow control and filter to remove
impurities from the water flow.
Valve: 1/2” IPS chrome plated brass stay-open ball valve. Valve is
US-made with chrome plated brass ball and PTFE seals.
Bowl: 11-1/2" (292mm) diameter stainless steel.
Supply: 1/2" NPT female inlet.
Waste: 1-1/2" OD chrome plated brass tailpiece.
Sign: Furnished with universal identification sign.
Quality Assurance: Unit is fully assembled and water tested
prior to shipment. Unit is third-party certified to comply with
ANSI Z358.1-2014.
Optional Features:
{{ Stainless steel dust cover for each spray head (add suffix “DC”)
{{ Chrome plated brass tailpiece and trap with 1-1/2" IPS waste
connection (add suffix “T”)
WaterSaver Faucet Co.
wsflab.com
Accessories:
{{ AP3600 thermostatic mixing valve blends hot and cold
water to deliver tepid water as provided by ANSI Z358.1-2014
(add suffix “TMV”). Refer to “Tempering Valves” section for
complete technical information.
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
17
Eye/Face Washes
FE774
Eye/Face Wash, Deck Mounted, 90 Degree AutoFlow™
Application: AutoFlow™ eye/face wash for mounting on counter
next to sink. Water flow is activated by swinging the spray head
assembly out over sink.
Construction: Polished chrome plated brass.
Mounting: Unit is mounted on right (FE774) or left (FE774LH) side
of sink.
Spray Head Assembly: Two FS-Plus™ spray heads. Each head has
a “flip top” dust cover, internal flow control and filter to remove
impurities from the water flow.
Valve: 1/2" IPS brass plug-type valve with O-ring seals. Swinging
spray head assembly from storage to operational position opens
orifice and activates water flow. Unit remains in operation until
spray head assembly is swung back into the storage position.
Strainer: Unit is furnished with in-line strainer to protect valve
and spray heads from debris in water line.
Supply: 1/2" NPT female inlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Unit is fully assembled and water tested
prior to shipment. Unit is third-party certified to comply with
ANSI Z358.1-2014.
FE774LH
FE774
FE793
Eye/Face Wash, Deck Mounted, 90 Degree AutoFlow™,
All-Stainless Steel
Application: All-stainless steel AutoFlow™ eye/face wash for
mounting on counter next to sink. Water flow is activated by
swinging the spray head assembly out over sink.
Construction: Type 316 stainless steel.
Mounting: Unit is mounted on right (FE793) or left (FE793LH)
side of sink.
Spray Head Assembly: Two FS-Plus™ spray heads. Each head has
a “flip top” dust cover, internal flow control and filter to remove
impurities from the water flow.
Valve: 1/2" IPS stainless steel plug-type valve with O-ring seals.
Swinging spray head assembly from storage to operational
position opens orifice and activates water flow. Unit remains
in operation until spray head assembly is swung back into the
storage position.
Strainer: Unit is furnished with in-line strainer to protect valve
and spray heads from debris in water line.
Supply: 1/2" NPT female inlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Unit is fully assembled and water tested
prior to shipment. Unit is third-party certified to comply with
ANSI Z358.1-2014.
FE793LH
FE793
Optional Features:
{{ Stainless steel dust cover for each spray head (add suffix “DC”)
Finish Options (FE774 only):
{{ Polished chrome plated finish with clear epoxy coating (PCL)
{{ Satin chrome plated finish with clear epoxy coating (SCC)
{{ Satin nickel plated finish with clear epoxy coating (SNC)
18
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
Accessories:
{{ AP3600 thermostatic mixing valve blends hot and cold
water to deliver tepid water as provided by ANSI Z358.1-2014
(add suffix “TMV”). Refer to “Tempering Valves” section for
complete technical information.
WaterSaver Faucet Co.
wsflab.com
Eye/Face Washes
FE775
Eye/Face Wash, Deck Mounted, 90 Degree Swivel
Application: Swivel eye/face wash for mounting on counter next
to sink. Water flow is activated by flag handle.
Construction: Polished chrome plated brass.
Mounting: Unit is mounted on right (FE775) or left (FE775LH) side
of sink.
Spray Head Assembly: Two FS-Plus™ spray heads. Each head has
a “flip top” dust cover, internal flow control and filter to remove
impurities from the water flow. Spray heads swivel 90 degrees
from storage to operational position.
Valve: 1/2" IPS chrome plated brass stay-open ball valve. Valve is
US-made with chrome plated brass ball and PTFE seals.
Supply: 1/2” NPT male inlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Unit is fully assembled and water tested
prior to shipment. Unit is third-party certified to comply with
ANSI Z358.1-2014.
FE775LH
FE775
FE795
Eye/Face Wash, Deck Mounted, 90 Degree Swivel,
All-Stainless Steel
Application: All-stainless steel swivel eye/face wash for
mounting on counter next to sink. Water flow is activated by flag
handle.
Construction: Type 316 stainless steel.
Mounting: Unit is mounted on right (FE795) or left (FE795LH)
side of sink.
Spray Head Assembly: Two FS-Plus™ spray heads. Each head has
a “flip top” dust cover, internal flow control and filter to remove
impurities from the water flow. Spray heads swivel 90 degrees
from storage to operational position.
Valve: 1/2" IPS stainless steel stay-open ball valve with stainless
steel flag handle. Valve has stainless steel ball and PTFE seals.
Supply: 1/2” NPT male inlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Unit is fully assembled and water tested
prior to shipment. Unit is third-party certified to comply with
ANSI Z358.1-2014.
FE795LH
FE795
Optional Features:
{{ Stainless steel dust cover for each spray head (add suffix “DC”)
Finish Options (FE775 only):
{{ Polished chrome plated finish with clear epoxy coating (PCL)
{{ Satin chrome plated finish with clear epoxy coating (SCC)
{{ Satin nickel plated finish with clear epoxy coating (SNC)
WaterSaver Faucet Co.
wsflab.com
Accessories:
{{ AP3600 thermostatic mixing valve blends hot and cold
water to deliver tepid water as provided by ANSI Z358.1-2014
(add suffix “TMV”). Refer to “Tempering Valves” section for
complete technical information.
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
19
Eye/Face Washes
FE778
Application: AutoFlow™ eye/face wash for mounting on wall
behind sink. Water flow is activated by swinging the spray head
assembly down over sink.
Eye/Face Wash, Wall Mounted, 90 Degree AutoFlow™
Construction: Polished chrome plated brass.
Mounting: Unit is mounted on wall behind sink. Furnished with
stainless steel housing for valve and inlet piping. Note: If unit is
not installed at a sink, a floor drain should be provided underneath
unit to prevent accumulation of water on floor.
Spray Head Assembly: Two FS-Plus™ spray heads. Each head has
a “flip top” dust cover, internal flow control and filter to remove
impurities from the water flow.
Model
FE778LH-L
Shown
Valve: 1/2" IPS brass plug-type valve with O-ring seals. Swinging
spray head assembly down from storage to operational position
opens orifice and activates water flow. Unit remains in operation
until spray head assembly is swung back up into the storage
position.
Strainer: Unit is furnished with in-line strainer to protect valve
and spray heads from debris in water line.
Supply: 1/2" NPT female union inlet.
Sign: Furnished with universal identification sign.
FE778LH-L
FE778LH
FE778LH-R
FE778L
FE778
FE778R
FE798
Quality Assurance: Unit is fully assembled and water tested
prior to shipment. Unit is third-party certified to comply with
ANSI Z358.1-2014.
Application: Stainless steel AutoFlow™ eye/face wash for
mounting on wall behind sink. Water flow is activated by
swinging the spray head assembly down over sink.
Eye/Face Wash, Wall Mounted, 90 Degree AutoFlow™,
All-Stainless Steel
Construction: Type 316 stainless steel.
Mounting: Unit is mounted on wall behind sink. Furnished with
stainless steel housing for valve and inlet piping. Note: If unit is
not installed at a sink, floor drain should be provided underneath
unit to prevent accumulation of water on floor.
Spray Head Assembly: Two FS-Plus™ spray heads. Each head has
a “flip top” dust cover, internal flow control and filter to remove
impurities from the water flow.
Model
FE798LH-L
Shown
Valve: 1/2" IPS stainless steel plug-type valve with O-ring seals.
Swinging spray head assembly down from storage to operational
position opens orifice and activates water flow. Unit remains in
operation until spray head assembly is swung back up into the
storage position.
Strainer: Unit is furnished with in-line strainer to protect valve
and spray heads from debris in water line.
Supply: 1/2" NPT female union inlet.
Sign: Furnished with universal identification sign.
FE798LH-L
FE798LH
FE798LH-R
FE798L
FE798
FE798R
Optional Features:
{{ Stainless steel dust cover for each spray head (add suffix “DC”)
Finish Options (FE778 only):
{{ Polished chrome plated finish with clear epoxy coating (PCL)
{{ Satin chrome plated finish with clear epoxy coating (SCC)
{{ Satin nickel plated finish with clear epoxy coating (SNC)
20
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
Quality Assurance: Unit is fully assembled and water tested
prior to shipment. Unit is third-party certified to comply with
ANSI Z358.1-2014.
Accessories:
{{ AP3600 thermostatic mixing valve blends hot and cold
water to deliver tepid water as provided by ANSI Z358.1-2014
(add suffix “TMV”). Refer to “Tempering Valves” section for
complete technical information.
WaterSaver Faucet Co.
wsflab.com
Eye/Face Washes
FE779
Application: AutoFlow™ eye/face wash for mounting on counter
behind sink. Water flow is activated by swinging the spray head
assembly down over sink.
Eye/Face Wash, Deck Mounted, 90 Degree AutoFlow™
Construction: Polished chrome plated brass.
Mounting: Unit is mounted on counter behind sink. Note: If
unit is not installed at a sink, a floor drain should be provided
underneath unit to prevent accumulation of water on floor.
Spray Head Assembly: Two FS-Plus™ spray heads. Each head has
a “flip top” dust cover, internal flow control and filter to remove
impurities from the water flow.
Valve: 1/2" IPS brass plug-type valve with O-ring seals. Swinging
spray head assembly down from storage to operational position
opens orifice and activates water flow. Unit remains in operation
until spray head assembly is swung back up into the storage
position.
Model
FE779LH
shown
Strainer: Unit is furnished with in-line strainer to protect valve
and spray heads from debris in water line.
Supply: 1/2” NPT male inlet.
Sign: Furnished with universal identification sign.
FE779LH-L
FE779LH
FE779LH-R
FE779L
FE779
FE779R
FE799
Quality Assurance: Unit is fully assembled and water tested
prior to shipment. Unit is third-party certified to comply with
ANSI Z358.1-2014.
Application: All-stainless steel AutoFlow™ eye/face wash for
mounting on counter behind sink. Water flow is activated by
swinging the spray head assembly down over sink.
Eye/Face Wash, Deck Mounted, 90 Degree AutoFlow™,
All-Stainless Steel
Construction: Type 316 stainless steel.
Mounting: Unit is mounted on counter behind sink. Furnished
with stainless steel housing for valve and inlet piping. Note: If
unit is not installed at a sink, a floor drain should be provided
underneath unit to prevent accumulation of water on floor.
Spray Head Assembly: Two FS-Plus™ spray heads. Each head has
a “flip top” dust cover, internal flow control and filter to remove
impurities from the water flow.
Valve: 1/2" IPS stainless steel plug-type valve with O-ring seals.
Swinging spray head assembly down from storage to operational
position opens orifice and activates water flow. Unit remains in
operation until spray head assembly is swung back up into the
storage position.
Strainer: Unit is furnished with in-line strainer to protect valve
and spray heads from debris in water line.
Model FE799LH-L shown
Supply: 1/2” NPT male inlet.
Sign: Furnished with universal identification sign.
FE799LH-L
FE799LH
FE799LH-R
FE799L
FE799
FE799R
Optional Features:
{{ Stainless steel dust cover for each spray head (add suffix “DC”)
Finish Options (FE779 only):
{{ Polished chrome plated finish with clear epoxy coating (PCL)
{{ Satin chrome plated finish with clear epoxy coating (SCC)
{{ Satin nickel plated finish with clear epoxy coating (SNC)
WaterSaver Faucet Co.
wsflab.com
Quality Assurance: Unit is fully assembled and water tested
prior to shipment. Unit is third-party certified to comply with
ANSI Z358.1-2014.
Accessories:
{{ AP3600 thermostatic mixing valve blends hot and cold
water to deliver tepid water as provided by ANSI Z358.1-2014
(add suffix “TMV”). Refer to “Tempering Valves” section for
complete technical information.
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
21
Eyewashes
EW808
Eyewash, Recessed Deck Mounted, Exposed Valve
Application: Eyewash for recessed mounting in countertop. Valve
is mounted on top of counter.
Spray Head Assembly: Two GS-Plus™ spray heads. Each head has
a “flip top” dust cover, internal flow control and filter to remove
impurities from the water flow.
Valve: 1/2" IPS chrome plated brass stay-open ball valve. Valve is
US-made with chrome plated brass ball and PTFE seals. Valve is
mounted on counter and activated by flag handle.
Bowl: 13" (330mm) diameter stainless steel with flanged rim for
mounting in countertop. Furnished with all hardware necessary
for installation in counter.
Supply: 1/2" NPT male inlet.
Waste: 1-1/4" NPT female outlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Unit is assembled and water tested
prior to shipment. Unit is third-party certified to comply with
ANSI Z358.1-2014.
EW810
Eyewash, Recessed Deck Mounted, Concealed Valve
Application: Eyewash for recessed mounting in countertop. Valve
is mounted below counter.
Spray Head Assembly: Two GS-Plus™ spray heads. Each head has
a “flip top” dust cover, internal flow control and filter to remove
impurities from the water flow.
Valve: 1/2" IPS brass stay-open ball valve. Valve is mounted on
aluminum angle bracket below counter and activated by pushdown knob.
Bowl: 13" (330mm) diameter stainless steel with flanged rim for
mounting in countertop. Furnished with all hardware necessary
for installation in counter.
Supply: 1/2" NPT male inlet.
Waste: 1-1/4" NPT female outlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Unit is fully assembled and water tested
prior to shipment. Unit is third-party certified to comply with
ANSI Z358.1-2014.
Optional Features:
{{ Stainless steel dust cover for each spray head (add suffix “DC”)
{{ Chrome plated brass tailpiece and trap with 1-1/2” IPS waste
connection (add suffix “T”)
{{ 1-1/2" OD chrome plated brass tailpiece (add suffix “TP”)
22
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
Accessories:
{{ AP3600 thermostatic mixing valve blends hot and cold
water to deliver tepid water as provided by ANSI Z358.1-2014
(add suffix “TMV”). Refer to “Tempering Valves” section for
complete technical information.
WaterSaver Faucet Co.
wsflab.com
Eyewashes
EW814
Eyewash, Wall Mounted
Application: Eyewash for wall mounting.
Mounting: Cast aluminum wall bracket with epoxy powder
coated finish.
Spray Head Assembly: Two GS-Plus™ spray heads. Each head has
a “flip top” dust cover, internal flow control and filter to remove
impurities from the water flow.
Valve: 1/2" IPS chrome plated brass stay-open ball valve. Valve is
US-made with chrome plated brass ball and PTFE seals.
Bowl: 11-1/2" (292mm) diameter stainless steel.
Supply: 1/2” NPT female inlet.
Waste: 1-1/4" NPT female outlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Unit is fully assembled and water tested
prior to shipment. Unit is third-party certified to comply with
ANSI Z358.1-2014.
EW814BC
Eyewash, Wall Mounted, Bowl Cover
Application: Eyewash for wall mounting. Unit has stainless steel
cover to protect bowl and spray heads from dust, dirt and other
contaminants.
Mounting: Cast aluminum wall bracket with epoxy powder
coated finish.
Spray Head Assembly: Two GS-Plus™ spray heads. Each head has
an internal flow control and filter to remove impurities from the
water flow.
Valve: 1/2" IPS chrome plated brass stay-open ball valve. Valve is
US-made with chrome plated brass ball and PTFE seals.
Bowl: 11-1/2" (292mm) diameter stainless steel with bowl cover.
Cover is raised automatically when flag handle is activated. Cover
closes when handle is returned to closed position.
Supply: 1/2" NPT female inlet.
Waste: 1-1/4" NPT female outlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Unit is fully assembled and water tested
prior to shipment. Unit is third-party certified to comply with
ANSI Z358.1-2014.
Optional Features:
{{ Stainless steel dust cover for each spray head (add suffix “DC”)
{{ Chrome plated brass tailpiece and trap with 1-1/2” IPS waste
connection (add suffix “T”)
{{ 1-1/2" OD chrome plated brass tailpiece (add suffix “TP”)
WaterSaver Faucet Co.
wsflab.com
Accessories:
{{ AP3600 thermostatic mixing valve blends hot and cold
water to deliver tepid water as provided by ANSI Z358.1-2014
(add suffix “TMV”). Refer to “Tempering Valves” section for
complete technical information.
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
23
Eyewashes
EW805
Eyewash, Deck Mounted, 90 Degree AutoFlow™
Application: AutoFlow™ eyewash for mounting on counter next
to sink. Water flow is activated by swinging the spray head
assembly out over sink.
Construction: Polished chrome plated brass.
Mounting: Unit is mounted on right (EW805) or left (EW805LH)
side of sink.
Spray Head Assembly: Two GS-Plus™ spray heads. Each head has
a “flip top” dust cover, internal flow control and filter to remove
impurities from the water flow.
Valve: 1/2" IPS brass plug-type valve with O-ring seals. Swinging
spray head assembly from storage to operational position opens
orifice and activates water flow. Unit remains in operation until
spray head assembly is swung back into the storage position.
Strainer: Unit is furnished with in-line strainer to protect valve
and spray heads from debris in water line.
Supply: 1/2" NPT female inlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Unit is fully assembled and water tested
prior to shipment. Unit is third-party certified to comply with
ANSI Z358.1-2014.
EW805LH
EW805
EW895
Eyewash, Deck Mounted, 90 Degree AutoFlow™,
All-Stainless Steel
Application: All-stainless steel AutoFlow™ eyewash for mounting
on counter next to sink. Water flow is activated by swinging the
spray head assembly out over sink.
Construction: Type 316 stainless steel.
Mounting: Unit is mounted on right (EW895) or left (EW895LH)
side of sink.
Spray Head Assembly: Two GS-Plus™ spray heads. Each head has
a “flip top” dust cover, internal flow control and filter to remove
impurities from the water flow.
Valve: 1/2" IPS stainless steel plug-type valve with O-ring seals.
Swinging spray head assembly from storage to operational
position opens orifice and activates water flow. Unit remains
in operation until spray head assembly is swung back into the
storage position.
Strainer: Unit is furnished with in-line strainer to protect valve
and spray heads from debris in water line.
Supply: 1/2" NPT female inlet.
Sign: Furnished with universal identification sign.
EW895LH
EW895
Optional Features:
{{ Stainless steel dust cover for each spray head (add suffix “DC”)
Finish Options (EW805 only):
{{ Polished chrome plated finish with clear epoxy coating (PCL)
{{ Satin chrome plated finish with clear epoxy coating (SCC)
{{ Satin nickel plated finish with clear epoxy coating (SNC)
24
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
Quality Assurance: Unit is fully assembled and water tested
prior to shipment. Unit is third-party certified to comply with
ANSI Z358.1-2014.
Accessories:
{{ AP3600 thermostatic mixing valve blends hot and cold
water to deliver tepid water as provided by ANSI Z358.1-2014
(add suffix “TMV”). Refer to “Tempering Valves” section for
complete technical information.
WaterSaver Faucet Co.
wsflab.com
Eyewashes
EW806
Eyewash, Deck Mounted, 90 Degree Swivel
Application: Swivel eyewash for mounting on counter next to
sink. Water flow is activated by flag handle.
Construction: Polished chrome plated brass.
Mounting: Unit is mounted on right (EW806) or left (EW806LH)
side of sink.
Spray Head Assembly: Two GS-Plus™ spray heads. Each head has
a “flip top” dust cover, internal flow control and filter to remove
impurities from the water flow. Spray heads swivel 90 degrees
from storage to operational position.
Valve: 1/2" IPS chrome plated brass stay-open ball valve. Valve is
US-made with chrome plated brass ball and PTFE seals.
Supply: 1/2" NPT male inlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Unit is fully assembled and water tested
prior to shipment. Unit is third-party certified to comply with
ANSI Z358.1-2014.
EW806LH
EW806
EW893
Eyewash, Deck Mounted, 90 Degree Swivel, All-Stainless Steel
Application: All-stainless steel swivel eyewash for mounting on
counter next to sink. Water flow is activated by flag handle.
Construction: Type 316 stainless steel.
Mounting: Unit is mounted on right (EW893) or left (EW893LH)
side of sink.
Spray Head Assembly: Two GS-Plus™ spray heads. Each head has
a “flip top” dust cover, internal flow control and filter to remove
impurities from the water flow. Spray heads swivel 90 degrees
from storage to operational position.
Valve: 1/2" IPS stainless steel stay-open ball valve. Valve has
stainless steel ball and PTFE seals.
Supply: 1/2" NPT male inlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Unit is fully assembled and water tested
prior to shipment. Unit is third-party certified to comply with
ANSI Z358.1-2014.
EW893LH
EW893
Optional Features:
{{ Stainless steel dust cover for each spray head (add suffix “DC”)
Finish Options (EW806 only):
{{ Polished chrome plated finish with clear epoxy coating (PCL)
{{ Satin chrome plated finish with clear epoxy coating (SCC)
{{ Satin nickel plated finish with clear epoxy coating (SNC)
WaterSaver Faucet Co.
wsflab.com
Accessories:
{{ AP3600 thermostatic mixing valve blends hot and cold
water to deliver tepid water as provided by ANSI Z358.1-2014
(add suffix “TMV”). Refer to “Tempering Valves” section for
complete technical information.
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
25
Eyewashes
EW848
Application: AutoFlow™ eyewash for mounting on wall behind
sink. Water flow is activated by swinging the spray head
assembly down over sink.
Eyewash, Wall Mounted, 90 Degree AutoFlow™
Construction: Polished chrome plated brass.
Mounting: Unit is mounted on wall behind sink. Furnished with
stainless steel housing for valve and inlet piping. Note: If unit is
not installed at a sink, a floor drain should be provided underneath
unit to prevent accumulation of water on floor.
Spray Head Assembly: Two GS-Plus™ spray heads. Each head has
a “flip top” dust cover, internal flow control and filter to remove
impurities from the water flow.
Model
EW848LH-L
shown
Valve: 1/2" IPS brass plug-type valve with O-ring seals. Swinging
spray head assembly down from storage to operational position
opens orifice and activates water flow. Unit remains in operation
until spray head assembly is swung back up into the storage
position.
Strainer: Unit is furnished with in-line strainer to protect valve
and spray heads from debris in water line.
Supply: 1/2" NPT female union inlet.
Sign: Furnished with universal identification sign.
EW848LH-L
EW848LH
EW848LH-R
EW848L
EW848
EW848R
EW898
Quality Assurance: Unit is fully assembled and water tested
prior to shipment. Unit is third-party certified to comply with
ANSI Z358.1-2014.
Application: All-stainless steel AutoFlow™ eyewash for mounting
on wall behind sink. Water flow is activated by swinging the
spray head assembly down over sink.
Eyewash, Wall Mounted, 90 Degree AutoFlow™,
All-Stainless Steel
Construction: Type 316 stainless steel.
Mounting: Unit is mounted on wall behind sink. Furnished with
stainless steel housing for valve and inlet piping. Note: If unit is
not installed at a sink, a floor drain should be provided underneath
unit to prevent accumulation of water on floor.
Spray Head Assembly: Two GS-Plus™ spray heads. Each head has
a “flip top” dust cover, internal flow control and filter to remove
impurities from the water flow.
Valve: 1/2" IPS stainless steel plug-type valve with O-ring seals.
Swinging spray head assembly down from storage to operational
position opens orifice and activates water flow. Unit remains in
operation until spray head assembly is swung back up into the
storage position.
Model
EW898LH-L
shown
Strainer: Unit is furnished with in-line strainer to protect valve
and spray heads from debris in water line.
Supply: 1/2" NPT female union inlet.
Sign: Furnished with universal identification sign.
EW898LH-L
EW898LH
EW898LH-R
EW898L
EW898
EW898R
Optional Features:
{{ Stainless steel dust cover for each spray head (add suffix “DC”)
Finish Options (EW848 only):
{{ Polished chrome plated finish with clear epoxy coating (PCL)
{{ Satin chrome plated finish with clear epoxy coating (SCC)
{{ Satin nickel plated finish with clear epoxy coating (SNC)
26
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
Quality Assurance: Unit is fully assembled and water tested
prior to shipment. Unit is third-party certified to comply with
ANSI Z358.1-2014.
Accessories:
{{ AP3600 thermostatic mixing valve blends hot and cold
water to deliver tepid water as provided by ANSI Z358.1-2014
(add suffix “TMV”). Refer to “Tempering Valves” section for
complete technical information.
WaterSaver Faucet Co.
wsflab.com
Eyewashes
EW849
Application: AutoFlow™ eyewash for mounting on counter
behind sink. Water flow is activated by swinging the spray head
assembly down over sink.
Eyewash, Deck Mounted, 90 Degree AutoFlow™
Construction: Polished chrome plated brass.
Mounting: Unit is mounted on counter behind sink. Note: If
unit is not installed at a sink, a floor drain should be provided
underneath unit to prevent accumulation of water on floor.
Spray Head Assembly: Two GS-Plus™ spray heads. Each head has
a “flip top” dust cover, internal flow control and filter to remove
impurities from the water flow.
Valve: 1/2" IPS brass plug-type valve with O-ring seals. Swinging
spray head assembly down from storage to operational position
opens orifice and activates water flow. Unit remains in operation
until spray head assembly is swung back up into the storage
position.
Strainer: Unit is furnished with in-line strainer to protect valve
and spray heads from debris in water line.
Model EW849LH-L shown
Supply: 1/2" NPT male inlet.
Sign: Furnished with universal identification sign.
EW849LH-L
EW849LH
EW849LH-R
EW849L
EW849
EW849R
EW899
Quality Assurance: Unit is fully assembled and water tested
prior to shipment. Unit is third-party certified to comply with
ANSI Z358.1-2014.
Application: Stainless steel AutoFlow™ eyewash for mounting
on counter behind sink. Water flow is activated by swinging the
spray head assembly down over sink.
Eyewash, Deck Mounted, 90 Degree AutoFlow™,
All-Stainless Steel
Construction: Type 316 stainless steel.
Mounting: Unit is mounted on counter behind sink. Furnished
with stainless steel housing for valve and inlet piping. Note: If
unit is not installed at a sink, a floor drain should be provided
underneath unit to prevent accumulation of water on floor.
Spray Head Assembly: Two GS-Plus™ spray heads. Each head has
a “flip top” dust cover, internal flow control and filter to remove
impurities from the water flow.
Valve: 1/2" IPS stainless steel plug-type valve with O-ring seals.
Swinging spray head assembly down from storage to operational
position opens orifice and activates water flow. Unit remains in
operation until spray head assembly is swung back up into the
storage position.
Strainer: Unit is furnished with in-line strainer to protect valve
and spray heads from debris in water line.
Model EW899LH-L shown
Supply: 1/2" NPT male inlet.
Sign: Furnished with universal identification sign.
EW899LH-L
EW899LH
EW899LH-R
EW899L
EW899
EW899R
Optional Features
{{ Stainless steel dust cover for each spray head (DC)
Finish Options (EW849 only):
{{ Polished chrome plated finish with clear epoxy coating (PCL)
{{ Satin chrome plated finish with clear epoxy coating (SCC)
{{ Satin nickel plated finish with clear epoxy coating (SNC)
WaterSaver Faucet Co.
wsflab.com
Quality Assurance: Unit is fully assembled and water tested
prior to shipment. Unit is third-party certified to comply with
ANSI Z358.1-2014.
Accessories:
{{ AP3600 thermostatic mixing valve (TMV). Valve precisely
blends hot and cold water to deliver tepid water as provided
by ANSI Z358.1-2014.
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
27
Eyewashes – Barrier-Free
EWBF849
Eyewash, Deck Mounted, 90 Degree AutoFlow™, Barrier-Free
Application: Barrier-Free AutoFlow™ eyewash for mounting on
counter behind sink. Water flow is activated by swinging the
spray head assembly down over sink.
ADA Compliance: Unit is designed for use at handicapped
accessible workstations with 34" maximum counter height and
27" knee clearance. Eyewash spray head assembly is extended
and lowered to permit access by wheelchair user.
Construction: Polished chrome plated brass.
Mounting: Unit is mounted on counter behind sink. Note: If
unit is not installed at a sink, a floor drain should be provided
underneath unit to prevent accumulation of water on floor.
Spray Head Assembly: Two GS-Plus™ spray heads. Each head has
a “flip top” dust cover, internal flow control and filter to remove
impurities from the water flow.
Valve: 1/2" IPS brass plug-type valve with O-ring seals. Swinging
spray head assembly down from storage to operational position
opens orifice and activates water flow. Unit remains in operation
until spray head assembly is swung back up into the storage
position.
Model EWBF849LH-L shown
EWBF849LH-L EWBF849LH EWBF849LH-R EWBF849L
EWBF849
EWBF849R
Strainer: Unit is furnished with in-line strainer to protect valve
and spray heads from debris in water line.
Supply: 1/2" NPT male inlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Unit is fully assembled and water tested
prior to shipment. Unit is third-party certified to comply with
ANSI Z358.1-2014.
Optional Features:
{{ Stainless steel dust cover for each spray head (add suffix “DC”)
Finish Options:
{{ Polished chrome plated finish with clear epoxy coating (PCL)
{{ Satin chrome plated finish with clear epoxy coating (SCC)
{{ Satin nickel plated finish with clear epoxy coating (SNC)
28
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
Accessories:
{{ AP3600 thermostatic mixing valve blends hot and cold
water to deliver tepid water as provided by ANSI Z358.1-2014
(add suffix “TMV”). Refer to “Tempering Valves” section for
complete technical information.
WaterSaver Faucet Co.
wsflab.com
Eyewash/Drench Hose Units
EW1022
Eyewash/Drench Hose Unit,
Deck Mounted
Application: Dual purpose eyewash/drench
hose unit meets the provisions of ANSI
Z358.1-2014 as both an eyewash and a
drench hose. Unit may be left in the deck
flange for use as a fixed eyewash, leaving
the user’s hands free. Alternatively, unit
may be removed for use as a drench hose
to rinse any part of the user’s eyes, face or
body.
providing “hands free” operation. Valve
stays open until locking clip is released.
Mounting: Deck mounted. Flange has
handle locator guide to position spray
heads and handle facing forward at all
times.
Sign: Furnished with universal
identification sign.
Spray Head Assembly: Two GS-Plus™
spray heads mounted side-by-side.
Each head has a “flip top” dust cover,
internal flow control and filter to remove
impurities from the water flow.
Valve: Forged brass squeeze valve
activated by stainless steel lever handle.
Valve has replaceable stainless steel
seat for exceptional durability. Locking
clip engages when handle is depressed,
EW1026
Eyewash/Drench Hose Unit,
Wall Mounted
Quality Assurance: Unit is fully assembled
and water tested prior to shipment. Unit
is third party certified to comply with
ANSI Z358.1 - 2014
Additional Model
EW1022BP Same as above except with
in-line dual check backflow preventer for
installation on inlet of hose. Backflow
preventer is certified to comply with
ASSE 1024/CSA-B64. Note: Check with
code authority for compliance with local
plumbing code.
Hose: 8' reinforced PVC hose. 300 PSI
maximum working pressure. Note: Hose
must be inspected at least monthly for
indications of wear, abrasion, loss of
flexibility or loosening of end connections.
Mounting: Wall mounted. Bracket with
spring clips holds unit on wall. Clips
position spray heads and handle to face
forward at all times.
Quality Assurance: Unit is fully assembled
and water tested prior to shipment. Unit
is third party certified to comply with
ANSI Z358.1 - 2014
Valve: Forged brass squeeze valve
activated by stainless steel lever handle.
Valve has replaceable stainless steel
seat for exceptional durability. Locking
clip engages when handle is depressed,
providing “hands free” operation. Valve
stays open until locking clip is released.
WaterSaver Faucet Co.
wsflab.com
Supply: 3/8" NPT male swivel inlet.
Application: Dual purpose eyewash/
drench hose unit meets the provisions of
ANSI Z358.1-2014 as both an eyewash and
a drench hose. Unit may be left in the wall
bracket for use as a fixed eyewash, leaving
the user’s hands free. Alternatively, unit
may be removed for use as a drench hose
to rinse any part of the user’s eyes, face or
body.
Spray Head Assembly: Two GS-Plus™
spray heads mounted side-by-side.
Each head has a “flip top” dust cover,
internal flow control and filter to remove
impurities from the water flow.
Optional Features:
{{ Stainless steel dust cover for each
spray head (add suffix “DC”)
{{ Flexible stainless steel hose in place of
PVC hose (add suffix “FSH”)
{{ Undercounter hose guide bracket to
prevent hose from tangling or binding
(add suffix “HG”)
{{ In-line vacuum breaker installed
between valve and spray head
assembly (add suffix “VB”)
Hose: 8' reinforced PVC hose. 300 PSI
maximum working pressure. Note:
Hose must be inspected at least monthly
for indications of wear, abrasion, loss of
flexibility or loosening of end connections.
Finish Options:
{{ Polished chrome plated finish with
clear epoxy coating (PCL)
{{ Satin chrome plated finish with clear
epoxy coating (SCC)
{{ Satin nickel plated finish with clear
epoxy coating (SNC)
Supply: 3/8" NPT male swivel inlet.
Sign: Furnished with universal
identification sign.
Additional Model
EW1026BP Same as above except with
in-line dual check backflow preventer for
installation on inlet of hose. Backflow
preventer is certified to comply with
ASSE 1024/CSA-B64. Note: Check with
code authority for compliance with local
plumbing code.
Accessories:
{{ AP3600 thermostatic mixing valve
blends hot and cold water to deliver
tepid water as provided by ANSI
Z358.1-2014 (add suffix “TMV”). Refer
to “Tempering Valves” section for
complete technical information.
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
29
Eyewash/Drench Hose Units
EW1041
Eyewash/Drench Hose Unit,
45 Degree Panel Mounted
Application: Dual purpose eyewash/
drench hose unit meets the provisions
of ANSI Z358.1-2014 as both an eyewash
and a drench hose. Unit may be left
in the angle holder for use as a fixed
eyewash, leaving the user’s hands free.
Alternatively, unit may be removed for use
as a drench hose to rinse any part of the
user’s eyes, face or body.
Hose: 8' reinforced PVC hose. 300 PSI
maximum working pressure. Note:
Hose must be inspected at least monthly
for indications of wear, abrasion, loss of
flexibility or loosening of end connections.
Mounting: 45 degree panel mounted.
Angle flange has handle locator guide to
position spray heads and handle facing
forward at all times.
Quality Assurance: Unit is fully assembled
and water tested prior to shipment. Unit
is third party certified to comply with
ANSI Z358.1 - 2014.
Spray Head Assembly: Two GS-Plus™
spray heads mounted side-by-side.
Each head has a “flip top” dust cover,
internal flow control and filter to remove
impurities from the water flow.
Valve: Forged brass squeeze valve
activated by stainless steel lever handle.
Valve has replaceable stainless steel
seat for exceptional durability. Locking
clip engages when handle is depressed,
providing “hands free” operation. Valve
stays open until locking clip is released.
EW1046
Eyewash/Drench Hose Unit,
Wall Mounted
Application: Dual purpose eyewash/
drench hose unit meets the provisions of
ANSI Z358.1-2014 as both an eyewash and
a drench hose. Unit may be left in the wall
bracket for use as a fixed eyewash, leaving
the user’s hands free. Alternatively, unit
may be removed for use as a drench hose
to rinse any part of the user’s eyes, face or
body.
Mounting: Wall mounted. Bracket with
spring clips holds unit on wall. Clips
position spray heads and handle to face
forward at all times.
Spray Head Assembly: Two GS-Plus™
spray heads mounted side-by-side.
Each head has a “flip top” dust cover,
internal flow control and filter to remove
impurities from the water flow.
Valve: Forged brass squeeze valve
activated by stainless steel lever handle.
Valve has replaceable stainless steel
seat for exceptional durability. Locking
clip engages when handle is depressed,
providing “hands free” operation. Valve
stays open until locking clip is released.
Optional Features:
{{ Stainless steel dust cover for each
spray head (add suffix “DC”)
{{ Flexible stainless steel hose in place of
PVC hose (add suffix “FSH”)
{{ In-line vacuum breaker installed
between valve and spray head
assembly (add suffix “VB”)
30
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
Finish Options:
{{ Polished chrome plated finish with
clear epoxy coating (PCL)
{{ Satin chrome plated finish with clear
epoxy coating (SCC)
{{ Satin nickel plated finish with clear
epoxy coating (SNC)
Supply: 3/8” NPT male swivel inlet.
Sign: Furnished with universal
identification sign.
Additional Model
EW1041BP Same as above except with
in-line dual check backflow preventer for
installation on inlet of hose. Backflow
preventer is certified to comply with
ASSE 1024/CSA-B64. Note: Check with
code authority for compliance with local
plumbing code.
Hose: 12' reinforced nylon retractable
coiled hose. 180 PSI maximum rated
working pressure. Note: Hose must be
inspected at least monthly for indications
of wear, abrasion, loss of flexibility or
loosening of end connections.
Supply: 3/8" NPT female inlet.
Sign: Furnished with universal
identification sign.
Quality Assurance: Unit is fully assembled
and water tested prior to shipment. Unit
is third party certified to comply with
ANSI Z358.1 - 2014.
Additional Model
EW1046BP Same as above except with
in-line dual check backflow preventer for
installation on inlet of hose. Backflow
preventer is certified to comply with
ASSE 1024/CSA-B64. Note: Check with
code authority for compliance with local
plumbing code.
Accessories:
{{ AP3600 thermostatic mixing valve
blends hot and cold water to deliver
tepid water as provided by ANSI
Z358.1-2014 (add suffix “TMV”). Refer
to “Tempering Valves” section for
complete technical information.
WaterSaver Faucet Co.
wsflab.com
Drench Hose Units
EW1020
Drench Hose Unit, Deck Mounted
Application: Drench hose unit for deck
mounting. Note: Under ANSI Z358.12014, drench hose units supplement, but
do not replace, other types of emergency
equipment.
Mounting: Deck flange has handle locator
guide to position handle facing forward at
all times.
Spray Head: Single FS-Plus™ spray head.
Spray head has a “flip top” dust cover,
internal flow control and filter to remove
impurities from the water flow.
Valve: Forged brass squeeze valve
activated by stainless steel lever handle.
Valve has replaceable stainless steel seat
for exceptional durability.
Supply: 3/8" NPT male swivel inlet.
Sign: Furnished with universal
identification sign.
Quality Assurance: Unit is fully assembled
and water tested prior to shipment. Unit
is third party certified to comply with
ANSI Z358.1 - 2014.
Additional Model
EW1020BP Same as above except with
in-line dual check backflow preventer for
installation on inlet of hose. Backflow
preventer is certified to comply with
ASSE 1024/CSA-B64. Note: Check with
code authority for compliance with local
plumbing code.
Hose: 8' reinforced PVC hose. 300 PSI
maximum working pressure. Note:
Hose must be inspected at least monthly
for indications of wear, abrasion, loss of
flexibility or loosening of end connections.
EW1025
Drench Hose Unit, Wall Mounted
Application: Drench hose unit for wall
mounting. Note: Under ANSI Z358.12014, drench hose units supplement, but
do not replace, other types of emergency
equipment.
Mounting: Wall mounted hook holds unit
on wall.
Spray Head: Single FS-Plus™ spray head.
Spray head has a “flip top” dust cover,
internal flow control and filter to remove
impurities from the water flow.
Valve: Forged brass squeeze valve
activated by stainless steel lever handle.
Valve has replaceable stainless steel seat
for exceptional durability.
Hose: 8' reinforced PVC hose. 300 PSI
maximum working pressure. Note:
Hose must be inspected at least monthly
for indications of wear, abrasion, loss of
flexibility or loosening of end connections.
Optional Features:
{{ Stainless steel dust cover for spray
head (add suffix “DC”)
{{ Flexible stainless steel hose in place of
PVC hose (add suffix “FSH”)
{{ Undercounter hose guide bracket to
prevent hose from tangling or binding
(add suffix “HG”)
{{ In-line vacuum breaker installed
between valve and spray head
assembly (add suffix “VB”)
WaterSaver Faucet Co.
wsflab.com
Finish Options:
{{ Polished chrome plated finish with
clear epoxy coating (PCL)
{{ Satin chrome plated finish with clear
epoxy coating (SCC)
{{ Satin nickel plated finish with clear
epoxy coating (SNC)
Supply: 3/8" NPT male swivel inlet.
Sign: Furnished with universal
identification sign.
Quality Assurance: Unit is fully assembled
and water tested prior to shipment. Unit
is third party certified to comply with
ANSI Z358.1 - 2014.
Additional Model
EW1025BP Same as above except with
in-line dual check backflow preventer for
installation on inlet of hose.
Backflow preventer is certified to comply
with ASSE 1024/CSA-B64. Note: Check
with code authority for compliance with
local plumbing code.
Accessories:
{{ AP3600 thermostatic mixing valve
blends hot and cold water to deliver
tepid water as provided by ANSI
Z358.1-2014 (add suffix “TMV”). Refer
to “Tempering Valves” section for
complete technical information.
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
31
Safety Stations
SS902
Application: Combination eyewash and shower safety station.
Safety Station with Eyewash
Shower Head: 10" (254mm) diameter safety orange ABS plastic.
Shower Valve: 1" IPS chrome plated brass stay-open ball valve.
Valve is US-made with chrome plated brass ball and PTFE seals.
Furnished with stainless steel actuating arm and 29" stainless
steel pull rod.
Spray Head Assembly: Two GS-Plus™ spray heads. Each head has
a “flip top” dust cover, internal flow control and filter to remove
impurities from the water flow.
Eyewash Valve: 1/2" IPS chrome plated brass stay-open ball valve.
Valve is US-made with chrome plated brass ball and PTFE seals.
Eyewash Bowl: 11-1/2" (292mm) diameter stainless steel.
Pipe and Fittings: Schedule 40 galvanized steel. Furnished with
orange polyethylene covers for piping for high visibility and
corrosion resistance.
Supply: 1-1/4" NPT female top or side inlet.
Waste: 1-1/4" NPT female outlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Eyewash assembly is factory assembled and
water tested prior to shipment. Unit is third-party certified to
comply with ANSI Z358.1-2014.
Additional Models
SS902PCC Same as above except with polished chrome plated
brass pipe and fittings.
SS909 Combination eye/face wash and shower safety station.
Furnished with four GS-Plus™ spray heads for complete rinsing of
user’s eyes and face.
SS909PCC Same as above except with polished chrome plated
brass pipe and fittings.
Optional Features:
{{ Epoxy powder coating on galvanized pipe and fittings.
Available colors include orange (ORG), yellow (YEL), green
(GRN) and red (RED).
{{ Stainless steel shower head (add suffix “SSH”)
{{ 20 GPM flow control for shower head (add suffix “FC20”)
{{ Stainless steel dust cover for each spray head (add suffix “DC”)
32
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
Accessories:
{{ Modesty curtain to provide privacy for user to disrobe while
using emergency shower (order AP250-015).
{{ Electric light and alarm horn assembly to notify personnel that
unit is in use (order AP275-205).
{{ AP3800 thermostatic mixing valve blends hot and cold
water to deliver tepid water as provided by ANSI Z358.1-2014
(add suffix “TMV”). Refer to “Tempering Valves” section for
complete technical information.
WaterSaver Faucet Co.
wsflab.com
Safety Stations
SS991
Safety Station with Eyewash, All-Stainless Steel
Application: All-stainless steel combination eyewash and shower
safety station.
Shower Head: 10" (254mm) diameter stainless steel.
Shower Valve: 1" IPS stainless steel stay-open ball valve. Valve
has stainless steel ball and PTFE seals. Furnished with stainless
steel actuating arm and 29" stainless steel pull rod.
Spray Head Assembly: Two GS-Plus spray heads. Each head has
a “flip top” dust cover, internal flow control and filter to remove
impurities from the water flow.
Eyewash Valve: 1/2" IPS stainless steel stay-open ball valve. Valve
has stainless steel ball and PTFE seals.
Eyewash Bowl: 11-1/4" (292mm) diameter stainless steel.
Pipe and Fittings: Schedule 40 stainless steel. Furnished with
orange polyethylene covers for piping for high visibility and
corrosion resistance.
Supply: 1-1/4" NPT female top or side inlet.
Waste: 1-1/4” NPT female outlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Eyewash assembly is factory assembled and
water tested prior to shipment. Unit is third-party certified to
comply with ANSI Z358.1-2014.
Additional Model
SS994 Combination eye/face wash and shower safety station
with all-stainless steel construction. Furnished with four GS-Plus
spray heads for complete rinsing of user’s eyes and face.
Optional Features:
{{ 20 GPM flow control for shower head (add suffix “FC20”)
{{ Stainless steel dust cover for each spray head (add suffix “DC”)
WaterSaver Faucet Co.
wsflab.com
Accessories:
{{ Modesty curtain to provide privacy for user to disrobe while
using emergency shower (order AP250-015).
{{ Electric light and alarm horn assembly to notify personnel that
unit is in use (order AP275-205). Flashing light and alarm horn
are connected to flow switch that is activated by water flow.
{{ AP3800 thermostatic mixing valve blends hot and cold
water to deliver tepid water as provided by ANSI Z358.1-2014
(add suffix “TMV”). Refer to “Tempering Valves” section for
complete technical information.
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
33
Safety Stations – Barrier-Free
SSBF909
Safety Station with Eye/Face Wash, Barrier-Free
Application: Barrier-free combination WideArea™ eye/face wash
and shower safety station.
ADA Compliance: Unit complies with ADA requirements for
accessibility by handicapped person. Shower head and pull
rod are extended for improved access. Bowl is lowered and
extended to permit access by wheelchair user. Profile of unit is
“flattened” to comply with maximum height and knee clearance
requirements.
Shower Head: 10" (254mm) diameter safety orange ABS plastic.
Shower Valve: 1" IPS chrome plated brass stay-open ball valve.
Valve is US-made with chrome plated brass ball and PTFE seals.
Furnished with stainless steel actuating arm and 47-1/2" stainless
steel pull rod.
Spray Head Assembly: Four GS-Plus™ spray heads. Each head has
a “flip top” dust cover, internal flow control and filter to remove
impurities from the water flow.
Eye/Face Wash Valve: 1/2" IPS chrome plated brass stay-open ball
valve. Valve is US-made with chrome plated brass ball and PTFE
seals.
Eye/Face Wash Bowl: 11-1/2" (292mm) diameter stainless steel.
Pipe and Fittings: Schedule 40 galvanized steel. Furnished with
orange polyethylene covers for piping for high visibility and
corrosion resistance.
Supply: 1-1/4" NPT female top or side inlet.
Waste: 1-1/4" NPT female outlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Eye/face wash frame assembly is factory
assembled and water tested prior to shipment. Unit is thirdparty certified to comply with ANSI Z358.1-2014.
Additional Model
SSBF994 Same as above except with all-stainless steel
construction.
Optional Features:
{{ Epoxy powder coating on galvanized pipe and fittings.
Available colors include orange (ORG), yellow (YEL), green
(GRN) and red (RED).
{{ Stainless steel shower head (add suffix “SSH”)
{{ 20 GPM flow control for shower head (add suffix “FC20”)
{{ Stainless steel dust cover for each spray head (add suffix “DC”)
34
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
Accessories:
{{ Modesty curtain to provide privacy for user to disrobe while
using emergency shower (order APBF250-015).
{{ Electric light and alarm horn assembly to notify personnel that
unit is in use (order AP275-205).
{{ AP3800 thermostatic mixing valve blends hot and cold
water to deliver tepid water as provided by ANSI Z358.1-2014
(add suffix “TMV”). Refer to “Tempering Valves” section for
complete technical information.
WaterSaver Faucet Co.
wsflab.com
Safety Stations – Barrier-Free
SSBF909PCC
Safety Station with Eye/Face Wash, Barrier-Free,
All-Polished Chrome
Application: Polished chrome plated brass barrier-free
combination WideArea™ eye/face wash and shower safety
station.
ADA Compliance: Unit complies with ADA requirements for
accessibility by handicapped person. Shower head and pull
rod are extended for improved access. Bowl is lowered and
extended to permit access by wheelchair user. Profile of unit is
“flattened” to comply with maximum height and knee clearance
requirements.
Shower Head: 10" (254mm) diameter stainless steel.
Shower Valve: 1" IPS chrome plated brass stay-open ball valve.
Valve is US-made with chrome plated brass ball and PTFE seals.
Furnished with stainless steel actuating arm and 47-1/2" stainless
steel pull rod.
Spray Head Assembly: Four GS-Plus™ spray heads. Each head has
a “flip top” dust cover, internal flow control and filter to remove
impurities from the water flow.
Eye/Face Wash Valve: 1/2" IPS chrome plated brass stay-open ball
valve. Valve is US-made with chrome plated brass ball and PTFE
seals.
Eye/Face Wash Bowl: 11-1/2" (292mm) diameter stainless steel.
Pipe and Fittings: Polished chrome plated brass.
Supply: 1-1/4" NPT female top or side inlet.
Waste: 1-1/4" NPT female outlet.
Sign: Furnished with universal identification sign.
Quality Assurance: Eye/face wash frame assembly is factory
assembled and water tested prior to shipment. Unit is thirdparty certified to comply with ANSI Z358.1-2014.
Optional Features:
{{ Epoxy powder coating on galvanized pipe and fittings.
Available colors include orange (ORG), yellow (YEL), green
(GRN) and red (RED).
{{ Stainless steel shower head (add suffix “SSH”)
{{ 20 GPM flow control for shower head (add suffix “FC20”)
{{ Stainless steel dust cover for each spray head (add suffix “DC”)
WaterSaver Faucet Co.
wsflab.com
Accessories:
{{ Modesty curtain to provide privacy for user to disrobe while
using emergency shower (order APBF250-015).
{{ Electric light and alarm horn assembly to notify personnel that
unit is in use (order AP275-205).
{{ AP3800 thermostatic mixing valve blends hot and cold
water to deliver tepid water as provided by ANSI Z358.1-2014
(add suffix “TMV”). Refer to “Tempering Valves” section for
complete technical information.
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
35
Faucet-Mounted Eyewashes
EyeSafe™ faucet-mounted eyewashes convert any faucet into an emergency eyewash station without interfering with normal faucet
operation. An EyeSafe™ unit can be installed at any sink, close to where accidents might occur. In an emergency, the eyewash is quickly
located and activated, and provides an unlimited supply of potable water for rinsing the user’s eyes.
important: The EW100 and EW101 faucet-mounted eyewashes require two motions to operate (turn on water, pull knob to activate
eyewash flow). Therefore, WaterSaver does not believe that these units meet the provisions of ANSI Z358.1-2014 as eyewash units.
These units are intended solely as supplemental units in addition to dedicated, plumbed eyewash equipment installed in the workplace.
Faucet-mounted eyewashes should be used with cold or warm water only. Use of hot water might cause scalding.
EW100
EyeSafe™ Faucet-Mounted Eyewash
Application: Faucet-mounted eyewash for
sink faucets.
Outlet Heads: Outlet heads are mounted
3" apart and deliver a soft, aerated flow of
water. Heads angle forward toward user.
Angle of heads is adjustable to permit full
coverage and avoid splashing. Furnished
with float-off dust covers to protect outlet
heads.
Valve: Forged brass diverter valve. Pull
knob to activate eyewash; water pressure
holds eyewash in operation, leaving user’s
hands free. Push knob or turn off faucet to
return to normal faucet operation.
EW101
EyeSafe™ Faucet-Mounted Eyewash
Application: Faucet-mounted eyewash for
gooseneck-style faucets.
Outlet Heads: Outlet heads are mounted
5" apart and deliver a soft, aerated flow of
water. Heads angle forward and inward
toward user. Angle of heads is adjustable
to permit full coverage and avoid
splashing. Furnished with float-off dust
covers to protect outlet heads.
Valve: Forged brass diverter valve. Pull
knob to activate eyewash; water pressure
holds eyewash in operation, leaving user’s
hands free. Push knob or turn off faucet to
return to normal faucet operation.
Finish Options:
{{ Polished chrome plated finish with clear epoxy coating (PCL)
{{ Satin chrome plated finish with clear epoxy coating (SCC)
{{ Satin nickel plated finish with clear epoxy coating (SNC)
36
Inlet: Body has 55/64"-27 female thread.
Furnished with three adaptors (15/16"-27,
13/16"-27 and 3/8" NPS) for installing on
most commonly used faucets, including
laboratory-type faucets.
Outlet: Furnished with removable aerator
on bottom.
Quality Assurance: Unit is fully assembled
and water tested prior to shipment.
Inlet: Body has 55/64"-27 female thread.
Furnished with three adaptors (15/16"-27,
13/16"-27 and 3/8" NPS) for installing on
most commonly used faucets, including
laboratory-type faucets.
Outlet: Furnished with removable aerator
on bottom.
Quality Assurance: Unit is fully assembled
and water tested prior to shipment.
Accessories:
{{ Inlet adaptor with 13/16"-24 female thread (order AP400-012)
{{ Replacement float-off dust covers (package of 2)
(order 250-046R)
WaterSaver Faucet Co.
wsflab.com
Faucet-Mounted Eyewashes
EyeSafe faucet-mounted eyewashes convert any faucet into an emergency eyewash station without interfering with normal faucet
operation. An EyeSafe unit may be installed at any sink, close to where accidents might occur. In an emergency, the eyewash is quickly
located and activated, and provides an unlimited supply of potable water for rinsing the user’s eyes.
Operation: The EW200 and EW201 faucet-mounted eyewashes offer the ability to activate the eyewash in a single motion. These
units are equipped with a diverter valve for the eyewash and a separate control valve for the faucet. Once the unit is installed on a
faucet, the faucet may be opened and left “on” to a preset temperature. To use the faucet, the flow of water is controlled by a quarterturn ball valve and knob at the bottom of the eyewash. To use the eyewash, simply pull the knob on the diverter valve on the front of
the eyewash. Since the faucet is open, this is the only motion required to activate the eyewash. Water pressure holds the eyewash in
operation, leaving the user’s hands free. To return to normal faucet operation, push the knob in or turn off the faucet.
important: Faucet-mounted eyewashes are intended solely as supplemental units in addition to dedicated, plumbed eyewash
equipment installed in the workplace.
Faucet-mounted eyewashes should be used with cold or warm water only. Use of hot water might cause scalding. Leaving a faucet
“on” with a valve at the outlet closed can cause cross-mixing of the hot and cold water. The water supply lines and/or the faucet
should therefore be furnished with check valves to prevent such mixing from occurring.
These units must not be installed on a faucet with an atmospheric vacuum breaker, as the faucet control valve downstream of the
vacuum breaker will interfere with its function. WaterSaver recommends consulting with the local plumbing code authority prior to
installing these units.
EW200
EyeSafe™ Faucet-Mounted Eyewash with
Faucet Control Valve
Application: Faucet-mounted eyewash for
sink faucets.
Outlet Heads: Outlet heads are mounted
3" apart and deliver a soft, aerated flow of
water. Heads angle forward toward user.
Angle of heads is adjustable to permit full
coverage and avoid splashing. Furnished
with float-off dust covers to protect outlet
heads.
Eyewash Valve: Forged brass diverter
valve. Pull knob to activate eyewash;
water pressure holds eyewash in
operation, leaving user’s hands free. Push
knob to return to normal faucet operation.
EW201
EyeSafe-X™ Faucet-Mounted Eyewash
with Faucet Control Valve
Application: Faucet-mounted eyewash for
gooseneck-style faucets.
Outlet Heads: Outlet heads are mounted
5" apart and deliver a soft, aerated flow of
water. Heads angle forward and inward
toward user. Angle of heads is adjustable
to permit full coverage and avoid
splashing. Furnished with float-off dust
covers to protect outlet heads.
Eyewash Valve: Forged brass diverter
valve. Pull knob to activate eyewash; water
pressure holds eyewash in operation,
leaving user’s hands free. Push knob to
return to normal faucet operation.
WaterSaver Faucet Co.
wsflab.com
Faucet Control Valve: Quarter turn ball
valve with chrome plated brass ball,
molded PTFE seals and plastic handle.
Inlet: Body has 55/64"-27 female thread.
Furnished with three adaptors (15/16"-27,
13/16"-27 and 3/8" NPS) for installing on
most commonly used faucets, including
laboratory-type faucets.
Outlet: Furnished with removable aerator
on bottom.
Quality Assurance: Unit is fully assembled
and water tested prior to shipment.
Faucet Control Valve: Quarter turn ball
valve with chrome plated brass ball,
molded PTFE seals and plastic handle.
Inlet: Body has 55/64"-27 female thread.
Furnished with three adaptors (15/16"-27,
13/16"-27 and 3/8" NPS) for installing on
most commonly used faucets, including
laboratory-type faucets.
Outlet: Furnished with removable aerator
on bottom.
Quality Assurance: Unit is fully assembled
and water tested prior to shipment.
37
Tempering Valves
AP3600
Tempering Valve, 6 Gallon Capacity
Application: Tempering valve to blend
hot and cold water to deliver tepid water.
Valve has flow capacity of 0.5 to 6 gallons
per minute (GPM). Valve can be used with
eyewash, eye/face wash, dual purpose
eyewash/drench hose or drench hose unit.
Mounting: Furnished with heavy duty
bracket for mounting valve on panel or wall.
Temperature Control: Valve has bimetallic
thermostat that senses incoming water
temperature and automatically blends
water to 85°F (29°C). High temperature
limit stop is set to 90°F (32°C). Valve has
dial thermometer on outlet to monitor
temperature of delivered water.
ASSE 1071 Certified
AP3602
Tempering Valve, 6 Gallon Capacity,
Stainless Steel Cabinet
Fail Safe: In event of restriction or loss of
hot water supply, internal bypass allows
valve to deliver cold water to emergency
unit. In bypass mode, valve will deliver 4
GPM of cold water at 30 PSI flow pressure.
Application: Tempering valve to blend
hot and cold water to deliver tepid water.
Valve has flow capacity of 0.5 to 6 gallons
per minute (GPM). Valve can be used with
eyewash, eye/face wash, dual purpose
eyewash/drench hose or drench hose unit.
Mounting: Furnished with 16 gauge Type
304 stainless steel wall mounted cabinet
with hinged door and lock.
Temperature Control: Valve has bimetallic
thermostat that senses incoming water
temperature and automatically blends
water to 85°F (29°C). High temperature
limit stop is set to 90°F (32°C). Valve has
dial thermometer on outlet to monitor
temperature of delivered water.
ASSE 1071 Certified
Fail Safe: In event of restriction or loss of
hot water supply, internal bypass allows
valve to deliver cold water to emergency
unit. In bypass mode, valve will deliver 4
GPM of cold water at 30 PSI flow pressure.
In event of loss of cold water supply, valve
will close and not deliver water.
In event of loss of cold water supply, valve
will close and not deliver water.
Flow Capacity: Please refer to a
WaterSaver engineering catalog or to our
website (wsflab.com) for flow capacity of
valve at specified pressure drops.
Supply Pressure: 30-125 PSI supply pressure
required for proper operation of valve.
Supply Temperature: Minimum
temperature for hot water supply is
140° F (60° C).
Inlets: 1/2" nominal sweat female hot and
cold water inlets. Each inlet has check
valve and supply stop.
Outlet: 1/2" NPT female outlet.
Quality Assurance: Valve is fully
assembled and water tested prior to
shipment. Valve is certified to ASSE 1071.
Flow Capacity: Please refer to a
WaterSaver engineering catalog or to our
website (wsflab.com) for flow capacity of
valve at specified pressure drops.
Supply Pressure: 30-125 PSI supply pressure
required for proper operation of valve.
Supply Temperature: Minimum
temperature for hot water supply is
140° F (60° C).
Inlets: 1/2" nominal sweat female hot and
cold water inlets. Each inlet has check
valve and supply stop.
Outlet: 1/2" NPT female outlet.
Quality Assurance: Valve is fully
assembled and water tested prior to
shipment. Valve is certified to ASSE 1071.
Additional Model
AP3607 Same as above except with recess
mounted stainless steel cabinet.
Important: Per ANSI Z358.1-2014, the water delivered by emergency equipment should be “tepid”. Tepid is defined as moderately warm
or lukewarm, and is generally considered to be between 60°F (15°C) and 90°F (32°C). However, in certain circumstances, a chemical
reaction may be accelerated or otherwise affected by the water temperature. Please consult with a medical advisor to determine the
optimum delivered water temperature prior to specifying, installing or using a tempering valve.
Tempering valves will not deliver the appropriate water temperature if the system has not been sized correctly. Please refer to the flow
capacities and supply pressure requirements listed above when designing the tempered water system and selecting tempering valves.
Tempering valves, like all emergency eyewash and shower equipment, must be installed in accordance with the manufacturer’s
instructions and maintained on a regular basis. Under ANSI Z358.1-2014, all emergency equipment should be activated weekly and
inspected at least annually. Tempering valves should be treated the same and, in addition, must be regularly cleaned and cycled.
38
WaterSaver Faucet Co.
wsflab.com
Tempering Valves
AP3800
Tempering Valve, 44 Gallon Capacity
Application: Tempering valve to blend
hot and cold water to deliver tepid
water. Valve has flow capacity of 3.0 to
44 gallons per minute (GPM). Valve can
be used with a single installation of an
emergency shower or safety station, or
with multiple installations of emergency
shower, eyewash, eye/face wash, dual
purpose eyewash/drench hose, drench
hose and safety station units.
Mounting: Furnished with heavy duty
bracket for mounting valve on panel or wall.
Temperature Control: Valve has bimetallic
thermostat that senses incoming water
temperature and automatically blends
water to 85°F (29°C). High temperature
limit stop is set to 90°F (32°C). Valve has
dial thermometer on outlet to monitor
temperature of delivered water.
ASSE 1071 Certified
AP3802
Tempering Valve, 44 Gallon Capacity,
Stainless Steel Cabinet
Flow Capacity: Please refer to a
WaterSaver engineering catalog or to our
website (wsflab.com) for flow capacity of
valve at specified pressure drops.
Supply Pressure: 30-125 PSI supply pressure
required for proper operation of valve.
Supply Temperature: Minimum
temperature for hot water supply is
140° F (60° C).
Inlets: 1" NPT female hot and cold water
inlets. Inlets can be rotated 360 degrees
for top, back or bottom supply. Each inlet
has an integral water strainer, check valve
and supply stop.
Outlet: 1-1/4" NPT female outlet.
Fail Safe: In event of restriction or loss of
hot water supply, internal bypass allows
valve to deliver cold water to emergency
unit. In bypass mode, valve will deliver 20
GPM of cold water at 30 PSI flow pressure.
Quality Assurance: Valve is fully
assembled and water tested prior to
shipment. Valve is certified to ASSE 1071.
Application: Tempering valve to blend
hot and cold water to deliver tepid
water. Valve has flow capacity of 3.0 to
44 gallons per minute (GPM). Valve can
be used with a single installation of an
emergency shower or safety station, or
with multiple installations of emergency
shower, eyewash, eye/face wash, dual
purpose eyewash/drench hose, drench
hose and safety station units.
Flow Capacity: Please refer to a
WaterSaver engineering catalog or to our
website (wsflab.com) for flow capacity of
valve at specified pressure drops.
Mounting: Furnished with 16 gauge Type
304 stainless steel wall mounted cabinet
with hinged door and lock.
Inlets: 1" NPT female hot and cold water
inlets. Inlets can be rotated 360 degrees
for top, back or bottom supply. Each inlet
has integral water strainer, check valve
and supply stop.
Temperature Control: Valve has bimetallic
thermostat that senses incoming water
temperature and automatically blends
water to 85°F (29°C). High temperature
limit stop is set to 90°F (32°C). Valve has
dial thermometer on outlet to monitor
temperature of delivered water.
ASSE 1071 Certified
In event of loss of cold water supply, valve
will close and not deliver water.
Fail Safe: In event of restriction or loss of
hot water supply, internal bypass allows
valve to deliver cold water to emergency
unit. In bypass mode, valve will deliver 20
GPM of cold water at 30 PSI flow pressure.
In event of loss of cold water supply, valve
will close and not deliver water.
Supply Pressure: 30-125 PSI supply pressure
required for proper operation of valve.
Supply Temperature: Minimum
temperature for hot water supply is
140° F (60° C).
Outlet: 1-1/4" NPT female outlet.
Quality Assurance: Valve is fully
assembled and water tested prior to
shipment. Valve is certified to ASSE 1071.
Additional Model
AP3807 Same as above except with
recessed mounted stainless steel cabinet.
Important: Per ANSI Z358.1-2014, the water delivered by emergency equipment should be “tepid”. Tepid is defined as moderately warm
or lukewarm, and is generally considered to be between 60°F (15°C) and 90°F (32°C). However, in certain circumstances, a chemical
reaction may be accelerated or otherwise affected by the water temperature. Please consult with a medical advisor to determine the
optimum delivered water temperature prior to specifying, installing or using a tempering valve.
Tempering valves will not deliver the appropriate water temperature if the system has not been sized correctly. Please refer to the flow
capacities and supply pressure requirements listed above when designing the tempered water system and selecting tempering valves.
Tempering valves, like all emergency eyewash and shower equipment, must be installed in accordance with the manufacturer’s
instructions and maintained on a regular basis. Under ANSI Z358.1-2014, all emergency equipment should be activated weekly and
inspected at least annually. Tempering valves should be treated the same and, in addition, must be regularly cleaned and cycled.
WaterSaver Faucet Co.
wsflab.com
39
Tempering Valves
AP3900
Tempering Valve, 81 Gallon Capacity
Application: Tempering valve to blend
hot and cold water to deliver tepid water.
Valve has flow capacity of 3.0 to 81 gallons
per minute (GPM). Valve can be used with
a single installation of an emergency
shower or safety station, or with multiple
installations of emergency shower,
eyewash, eye/face wash, dual purpose
eyewash/drench hose, drench hose and
safety station units.
GPM of cold water at 30 PSI flow pressure.
In event of loss of cold water supply, valve
will close and not deliver water.
Mounting: Furnished with heavy duty
bracket for mounting valve on panel or wall.
Supply Temperature: Minimum
temperature for hot water supply is
140° F (60° C).
Temperature Control: Valve has bimetallic
thermostat that senses incoming water
temperature and automatically blends
water to 85°F (29°C). High temperature
limit stop is set to 90°F (32°C). Valve has
dial thermometer on outlet to monitor
temperature of delivered water.
Fail Safe: In event of restriction or loss of
hot water supply, internal bypass allows
valve to deliver cold water to emergency
unit. In bypass mode, valve will deliver 40
AP3902
Tempering Valve, 81 Gallon Capacity,
Stainless Steel Cabinet
Application: Tempering valve to blend
hot and cold water to deliver tepid water.
Valve is furnished with wall mounted
stainless steel cabinet. Valve has flow
capacity of 3.0 to 81 gallons per minute
(GPM). Valve can be used with a single
installation of an emergency shower
or safety station, or with multiple
installations of emergency shower,
eyewash, eye/face wash, dual purpose
eyewash/drench hose, drench hose and
safety station units.
Mounting: Furnished with 16 gauge Type
304 stainless steel wall mounted cabinet
with hinged door and lock.
Temperature Control: Valve has bimetallic
thermostat that senses incoming water
temperature and automatically blends
water to 85°F (29°C). High temperature
limit stop is set to 90°F (32°C). Valve has
dial thermometer on outlet to monitor
temperature of delivered water.
Fail Safe: In event of restriction or loss of
hot water supply, internal bypass allows
valve to deliver cold water to emergency
unit. In bypass mode, valve will deliver 40
Flow Capacity: Please refer to a
WaterSaver engineering catalog or to our
website (wsflab.com) for flow capacity of
valve at specified pressure drops.
Supply Pressure: 30-125 PSI supply pressure
required for proper operation of valve.
Inlets: 1-1/4” NPT female hot and cold
water inlets. Inlets can be rotated 360
degrees for top, back or bottom supply.
Each inlet has an integral water strainer,
check valve and supply stop.
Outlet: 1-1/2" NPT female outlet.
Quality Assurance: Valve is fully
assembled and water tested prior to
shipment.
GPM of cold water at 30 PSI flow pressure.
In event of loss of cold water supply, valve
will close and not deliver water.
Flow Capacity: Please refer to a
WaterSaver engineering catalog or to our
website (wsflab.com) for flow capacity of
valve at specified pressure drops.
Supply Pressure: 30-125 PSI supply pressure
required for proper operation of valve.
Supply Temperature: Minimum
temperature for hot water supply is
140° F (60° C).
Inlets: 1-1/4" NPT female hot and cold
water inlets. Inlets can be rotated 360
degrees for top, back or bottom supply.
Each inlet has an integral water strainer,
check valve and supply stop.
Outlet: 1-1/2" NPT female outlet.
Quality Assurance: Valve is fully
assembled and water tested prior to
shipment.
Additional Model
AP3907 Same as above except with
recessed mounted stainless steel cabinet.
Important: Per ANSI Z358.1-2014, the water delivered by emergency equipment should be “tepid”. Tepid is defined as moderately warm
or lukewarm, and is generally considered to be between 60°F (15°C) and 90°F (32°C). However, in certain circumstances, a chemical
reaction may be accelerated or otherwise affected by the water temperature. Please consult with a medical advisor to determine the
optimum delivered water temperature prior to specifying, installing or using a tempering valve.
Tempering valves will not deliver the appropriate water temperature if the system has not been sized correctly. Please refer to the flow
capacities and supply pressure requirements listed above when designing the tempered water system and selecting tempering valves.
Tempering valves, like all emergency eyewash and shower equipment, must be installed in accordance with the manufacturer’s
instructions and maintained on a regular basis. Under ANSI Z358.1-2014, all emergency equipment should be activated weekly and
inspected at least annually. Tempering valves should be treated the same and, in addition, must be regularly cleaned and cycled.
40
WaterSaver Faucet Co.
wsflab.com
Accessories – Modesty Curtains
AP250-015
Modesty Curtain for Horizontal Showers and Safety Stations
In an emergency, it is imperative that contaminated clothing
be removed as quickly as possible. However, a worker may be
reluctant to remove his or her clothing in the presence of coworkers. A modesty curtain will protect the privacy of the user
and permit disrobing while the shower is in operation.
Application: Modesty curtain for installation on horizontally
mounted emergency showers and free-standing combination
safety stations.
Mounting: Furnished complete with stainless steel track, brackets
and clamps for mounting on vertical and horizontal piping. All
hardware required for installation is included.
Curtain: White UV-resistant nylon curtain with ring hangers.
Curtain has tie-back so it can be neatly stored when shower is
not in use. Curtain has interior pocket for storing a smock to be
used after contaminated clothing is removed.
Additional Model
APBF250-015 Same as above except for installation on barrier-free
safety stations.
AP250-065
Modesty Curtain for Recessed Laboratory Units
In an emergency, it is imperative that contaminated clothing
be removed as quickly as possible. However, a worker may be
reluctant to remove his or her clothing in the presence of coworkers. A modesty curtain will protect the privacy of the user
and permit disrobing while the shower unit is in operation.
Application: Modesty curtain for use with recessed laboratory
units, including emergency showers and combination safety
stations.
Mounting: Stainless steel track assembly mounts on wall around
recessed safety unit. All hardware required for installation (except
screws or anchors for wall) is included.
Curtain: White UV-resistant nylon curtain with ring hangers.
Curtain has tie-back so it can be neatly stored when emergency
equipment is not in use. Curtain has interior pocket for storing a
smock to be used after contaminated clothing is removed.
WaterSaver Faucet Co.
wsflab.com
UPC listed 8116. ETL listed
101496. Units have been
tested to and comply with
ANSI Z358.1-2014.
41
Accessories – Alarms
AP275-205
Alarm Unit for Safety Stations,
Flashing Light and Horn
Alarm units serve two important functions when installed
with emergency eyewash and shower equipment. First, alarms
alert facility personnel that an accident has occurred and that
assistance may be required. Second, alarms deter unintended
or malicious activation of the emergency equipment. Alarms
are therefore advisable in schools and other facilities where the
possibility of vandalism is present. All alarm units are supplied
with a flow switch that senses the movement of water in the
supply line when an emergency unit is activated. The flow switch
activates a bright flashing light and loud horn and sends a signal
to a remote monitoring station or building management system.
Application: Alarm unit for use with free-standing combination
safety stations.
Mounting: Furnished with mounting hardware for installation
on the vertical pipe of safety station or on adjacent wall.
Visual Signal: Weatherproof amber flashing light with shatterresistant lens.
Audible Signal: Alarm horn with 100 db sound at 10 feet. Output
volume is adjustable.
Remote Monitoring: Unit sends signal to remote monitoring
location when water flow is activated.
Flow Switch: 1-1/4" IPS double pole, double throw flow switch for
installation in water supply line to safety station. Switch senses
flow of water when either eyewash or shower is activated. When
switch is activated, light turns on, alarm sounds and signal is sent
to remote monitoring station.
Electrical Requirements: 120 volt, 0.48 amp electrical supply is
required. Alarm is furnished with junction box, 5 foot NEMA 4X
flexible cord and receptacle. Electrical connections by others.
Quality Assurance: Unit is fully assembled and factory tested
prior to shipment.
Additional Models
A275-200 Same as above except without remote monitoring
capability. Flow switch is single pole, double throw.
A280-205 Alarm unit with flashing light and horn for use with
emergency showers. Furnished with 1" IPS double pole, double
throw flow switch.
A280-200 Same as above except without remote monitoring
capability. Flow switch is single pole, double throw.
42
WaterSaver Faucet Co.
wsflab.com
Accessories - Alarms
AP280-235
Alarm Unit for Recessed Laboratory Units,
Flashing Light and Horn
Alarm units serve two important
functions when installed with emergency
eyewash and shower equipment. First,
alarms alert facility personnel that an
accident has occurred and that assistance
may be required. Second, alarms deter
unintended or malicious activation of
the emergency equipment. Alarms
are therefore advisable in schools and
other facilities where the possibility of
vandalism is present. All alarm units are
supplied with a flow switch that senses
the movement of water in the supply line
when an emergency unit is activated. The
flow switch activates a bright flashing
light and loud horn and sends a signal to
a remote monitoring station or building
management system.
Application: Alarm unit for use with
recessed laboratory units.
Mounting: Combination light/alarm is
recess mounted in wall. Flow switch and
electrical wiring are located behind wall.
Audible Signal: Alarm horn with 90
db sound at 10 feet. Output volume is
adjustable.
Remote Monitoring: Unit sends signal to
remote monitoring location when water
flow is activated.
Flow Switch: 1" IPS double pole, double
throw flow switch for installation in
water supply line to safety station. Switch
senses flow of water when either eyewash
or shower is activated.
Electrical Requirements: 120 volt, 0.11 amp
electrical supply is required. Electrical
connections by others.
Quality Assurance: All components are
factory tested prior to shipment.
Additional Model
AP280-230 Same as above except without
remote monitoring capability. Flow
switch is single pole, double throw.
Visual Signal: Weatherproof amber
flashing light with shatter-resistant lens.
AP280-245
Alarm Unit for Surface Mounted
Laboratory Units
Alarm units serve two important
functions when installed in conjunction
with emergency eyewash and shower
equipment. First, alarms serve to alert
facility personnel that an accident has
occurred and that assistance to the user
may be required. Second, alarms deter
unintended or malicious operation of the
emergency equipment. For this reason,
they are advisable in schools and other
areas where the possibility of vandalism
is present. Alarms are activated by a flow
switch that senses the movement of
water in the supply line when the safety
unit is activated. Once activated, the
bright light flashes and the horn sounds
loudly.
Application: Alarm unit for use with
surface mounted laboratory units.
Mounting: Combination light/alarm is
surface mounted on wall. Flow switch
and electrical wiring are located behind
wall.
Audible Signal: Alarm horn with 90
db sound at 10 feet. Output volume is
adjustable.
Remote Monitoring: Unit sends signal to
remote monitoring location when water
flow is activated.
Flow Switch: 1” IPS double pole, double
throw flow switch for installation in
water supply line to safety station. Switch
senses flow of water when either eyewash
or shower is activated.
Electrical Requirements: 120 volt, 0.11 amp
electrical supply is required. Electrical
connections by others.
Quality Assurance: All components are
factory tested prior to shipment.
Additional Models
AP280-240
Same as above except without
remote monitoring capability. Flow
switch is single pole, double throw.
Visual Signal: Weatherproof amber
flashing light with shatter-resistant lens.
WaterSaver Faucet Co.
wsflab.com
43
Accessories - Spray Heads
Each spray head features:
• Unique design provides a consistently soft, full spray of water across a range of working pressures from 30 to 100 PSI
• Tough polypropylene plastic construction
• Integrated “flip-top” dust cover
• Easily accessible 1.8 GPM (GS-Plus™) or 3.2 GPM (FS-Plus™) flow controls.
• Dense (60 pore per inch) polyurethane internal filter
GS-Plus™ Spray Head
Item Part Number
A
B
C
D
Description
Item Part Number
GS-Plus™ Spray Head (complete)
Dust Cover and Cap Assembly (Pkg of 2)
60 PPI Polyurethane Filter (Pkg of 6)
1.8 GPM Flow Control (Pkg of 6)
E
F
G
H
AP470-021
AP470-022R
470-024R
470-025R
Description
FS-Plus™ Spray Head (complete)
Dust Cover and Cap Assembly (Pkg of 2)
60 PPI Polyurethane Filter (Pkg of 6)
3.2 GPM Flow Control (Pkg of 6)
A
E
B
F
C
G
D
44
AP470-001
AP470-002R
470-004R
470-005R
FS-Plus™ Spray Head
IMPORTANT
In order to operate properly, the
flow control must be inserted
into the body concave end first.
H
WaterSaver Faucet Co.
wsflab.com
Accessories - Signs
All signs are 8-1/2" x 11" plastic
Emergency
Shower
Emergency
Eyewash
Emergency
Eyewash/Drench Hose
Keep Area Clear
Test All Emergency Equipment Weekly
Keep Area Clear
Test All Emergency Equipment Weekly
Keep Area Clear
Test All Emergency Equipment Weekly
WaterSaver Faucet
701 W Erie St
Chicago, IL 60654
telephone
facsimile
250-009W
WaterSaver Faucet
701 W Erie St
Chicago, IL 60654
312 666 5500
312 666 5501
wsflab.com
telephone
facsimile
250-007W
WaterSaver Faucet
701 W Erie St
Chicago, IL 60654
312 666 5500
312 666 5501
wsflab.com
telephone
facsimile
250-010W
Emergency
Drench Hose
Emergency
Shower/Eyewash
Emergency
Shower/Eyewash
Keep Area Clear
Test All Emergency Equipment Weekly
Keep Area Clear
Test All Emergency Equipment Weekly
Keep Area Clear
Test All Emergency Equipment Weekly
WaterSaver Faucet
701 W Erie St
Chicago, IL 60654
312 666 5500
312 666 5501
wsflab.com
250-006W
WaterSaver Faucet Co.
wsflab.com
312 666 5500
312 666 5501
wsflab.com
telephone
facsimile
WaterSaver Faucet
701 W Erie St
Chicago, IL 60654
250-008W
312 666 5500
312 666 5501
wsflab.com
telephone
facsimile
WaterSaver Faucet
701 W Erie St
Chicago, IL 60654
312 666 5500
312 666 5501
wsflab.com
telephone
facsimile
250-012W
45
WaterSaver Faucet Co.
701 W Erie Street
Chicago, IL 60654
312 666 5500 TELEPHONE
312 666 5501 FACSIMILE
[email protected]flab.com
wsflab.com
WaterSaver Faucet de Mexico SA de CV
Calle Octava #1140
Parque Industrial Monterrey
Apodaca, NL 66603
52 81 1090 0000 TELEPHONE
WaterSaver Sales Asia Pte Ltd
30 Petain Road
208099 Singapore
65 6883 2105 TELEPHONE
65 6883 2509 FACSIMILE
WaterSaver LabTaps Ltd
Unit 11
High Carr Network Centre
Newcastle-Under-Lyme
Staffordshire, England, ST5 7XE
44 01782 576910 TELEPHONE
44 01782 576911 FACSIMILE
© 2015 WaterSaver Faucet Company WSF-LSE015
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement