Sharp | LC-60C7450U | LC-60C7450U

IP Link® Device Interface
Communication Sheet
shrp_10_6197_1.pke
Revision: 10/30/2012
This document provides additional assistance with wiring your Extron IP Link enabled product to your device.
Different components may require a different wiring scheme than those listed below.
For complete operating instructions, refer to the user's manual for the specific Extron IP Link enabled product or
the controlled device manufacturer supplied documentation.
Device Specifications:
Device Type:
Manufacturer:
Firmware Version:
Model(s):
Display
Sharp
N/A
LC-60C7450U, LC-60C8470U, LC-70C7450U, LC-70C8470U
Version History:
Driver
Version
1
Date
10/29/2012
IP Link
Compiler
GC
Version
1.5.1
3.3.2
Notes
Initial version.
Driver Notes:
Page 1 of 5
IP Link® Device Interface
Communication Sheet
shrp_10_6197_1.pke
Revision: 10/30/2012
Control Commands & States:
Side Bar
Smart stretch
Zoom
Stretch
Normal (PC)
Zoom [PC]
Stretch [PC]
Dot by Dot
Full Screen
Auto
Original
Toggle
Audio Mute
On
Off
Toggle
Channel Number
0 to 9
.
Enter
Aspect Ratio
Clear
Channel TV (Step)
Up
Down
Closed Caption
Toggle
Freeze
Toggle
Input
TV
HDMI1
HDMI2
HDMI3
HDMI4
Component
Video 1
Video 2
PC
Up
Down
Left
Right
Menu
Enter
Toggle
Menu Navigation
Exit
Power Control
On
Off
Toggle
Tuner Mode
Analog Air
Digital Air
Digital Cable 1
Digital Cable 2
Volume (Discrete)
0 to 60 in steps of 1
Volume (Step)
Up
Down
Page 2 of 5
IP Link® Device Interface
Communication Sheet
shrp_10_6197_1.pke
Revision: 10/30/2012
Status Available:
Side Bar
Smart stretch
Zoom
Stretch
Normal (PC)
Zoom [PC]
Stretch [PC]
Dot by Dot
Full Screen
Auto
Original
Audio Mute
On
Off
Connection Status
Connected
Disconnected
Input
PC
HDMI1
HDMI2
HDMI3
HDMI4
Component
Video 1
Video 2
Power Control
On
Off
Volume (Discrete)
0 to 60 in steps of 1
Aspect Ratio
Page 3 of 5
IP Link® Device Interface
Communication Sheet
shrp_10_6197_1.pke
Revision: 10/30/2012
MLC60 Series Supported Commands:
Side Bar
Smart stretch
Zoom
Stretch
Normal (PC)
Zoom [PC]
Stretch [PC]
Dot by Dot
Full Screen
Auto
Original
Toggle
Audio Mute
On
Off
Toggle
Channel TV (Step)
Up
Down
Closed Caption
Toggle
Freeze
Toggle
Input
TV
HDMI1
HDMI2
HDMI3
HDMI4
Component
Video 1
Video 2
PC
Up
Down
Left
Right
Menu
Enter
Off
Toggle
Aspect Ratio
Toggle
Menu Navigation
Exit
Power Control
On
Volume (Discrete)
0 to 60 in steps of 1
Volume (Step)
Up
Down
*To keep RS232 port open during standby, the “RS232 Enable” needs to be configured on the “Power Off” button
on MLC60 series.
Page 4 of 5
shrp_10_6197_1.pke
IP Link® Device Interface
Communication Sheet
Revision: 10/30/2012
Cable and Adapter Requirements:
F/F RS-232 Null Modem Serial Cable.
Notes for the Device:
Serial communication:
Port Type: RS-232
Baud Rate: 9600
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
Pin Assignments Diagram:
Note: Captive screw connector may also be used as a serial connection.
General Notes:
Page 5 of 5
Download PDF

advertising