SNMP-1000-B - Vox Technologies

SNMP-1000-B
Intelligent SNMP/HTTP
System Manager
Features
 Monitors system fans, temperature, voltage, power supply, CPU fan, CPU
temperature, Vcore, watchdog timer, etc.
 Stand alone system monitoring: no driver needed, OS-independent
 Remote alarm notification through SNMP/HTTP, e-mail or pager
 Easy status monitoring through Ethernet using a browser
 Highly reliable: functions even when system or power fails
 Modular design eases system integration and customization
Introduction
The SNMP-1000-B is a platform independent system management module that can detect system operating conditions and notify users to take necessary action to avert system
failure through multiple communication protocols. With the SNMP-1000-B installed, a system monitoring and management can be integrated into an existing SNMP-based network
management environment. The SNMP-1000-B also has a built-in web-based administration interface which allows users to monitor the system operation from any place with Internet
connectivity. The SNMP-1000-B adds another dimension of reliability to your most critical applications.
Powerful yet Easy to Use
The SNMP-1000-B can detect a wide variety of internal system conditions, including temperature, voltage, fan rotation, power supply or CPU operations such as
watchdog timer output. Through its I2C interface it can even monitor CPU temperature and voltages of Advantech’s full-sized CPU cards. Depending on the alarm
severity or user setup, it can generate several different alarm outputs, including SNMP trap, e-mail, pager, acoustic signal, system reset and digital output. Through the
easy-to-use web-based user interface, users can set the alarm criteria and select alarm outputs for each sensor input independently to meet user requirements. The backup battery
enables the SNMP-1000-B to perform its alarm function even during total system power failure.
Web-enabled, No Driver Needed
The onboard 10/100 Mbps Fast Ethernet interface enables the SNMP-1000-B to be connected to your existing network, independent from the system’s connection. It supports multiple
network protocols such as TCP/IP, SNMP, HTTP and Telnet, allowing you to manage your systems simply by using a web browser. No special software driver is needed thus eliminating
compatibility issues with different operating systems.
Online Upgrade and Batch Setup
You can upgrade the firmware online by using the included setup utility. There is no need to go to a remote site and disassemble the chassis to collect each SNMP-1000-B module
or card for firmware upgrade. The setup utility also supports “batch setup” function, which allows you to save a configuration and duplicate it to many other SNMP-1000-B modules
and cards. This function saves tremendous time and effort when you have a number of SNMP-1000-B units installed in your environment.
Flexible Modular Hardware Design
The modular design of the SNMP-1000-B allows it to be easily customized to fit into any system. The ultra compact module is only 41 mm wide and 94 mm long. It can be mounted
on standard or customized carrier boards to plug into any standard PCI/ISA slot.
Optional
SNMP-1000-E1B1
SNMP-1000-E2B1
SNMP-1000-B
Firmware Specifications
System Status
Monitoring and
Management
Alarm Notification
Supported Protocols
Management Function
Sensor Specifications
Real-time healthy status monitoring: Provides real-time
status display in HTTP/Java graphical format
History log up to 600 records. Data can be downloaded
through network or sent by e-mail
Alarm event record display
E-mail: Can set up to 4 addresses to receive e-mails
SNMP trap: Notify up to 8 SNMP administrators
Pager notification: Dial out through external modem to
send messages to up to 8 pagers
Audible alarm sound
TCP, UDP, IP, ICMP, DHCP, BOOTP, ARP, SNMP, HTTP,
Telnet
Web-based remote configure, control and monitor
Remote reset, power down and power up
Remote digital output signal control
Remote message display control
Firmware upgrade from serial port and Ethernet port
Modem dial in (console mode only)
Voltage
Input
Input
Temperature
Fan Speed
Power Good
Sensor
Interface
Range
Input
Range
Input
Range
Interface
Input
CPU Card
Healthy
Compatibility
Digital Input/
Output
Input
Output
+5 VDC, -5 VDC, +5 VSB, +3.3 VDC, +12 VDC, -12 VDC
9 (one for on-board sensor, eight for external
sensors)
LM75
I2C
-30 ~ 125 °C (-22 ~ 257 °F)
9 (7 for SNMP-1000-E2A1)
700 ~ 10000 rpm
4 (1 for SNMP-1000-E2A1)
High > 2.4 VDC, Low < 0.8 VDC
I2C
CPU Vcore, CPU fan, CPU temperature (up to 2
CPUs), +5 VDC, -5 VDC, VI/O, +12 VDC, -12 VDC
PCA-6002-B, 6003, 6004, 6005-B, 6181,
6183,6184, 6185, 6186, 6277-B, 6187, 6188,
6189, 6190
AIMB-740, 741, 742, 744, 750, 760,762,
560,554
8 (SNMP-1000-E1B1 only)
4 (3 for SNMP-1000-2A1)
System Specifications
Processor System
Environment
Ethernet
Serial Port
Miscellaneous
Battery
Power Requirement
CPU
Firmware
Memory
Interface
Interface
Baud Rate
Buzzer Support
Detect Time-out Signal of System
Watchdog Timer
Charge Time
Battery Type
Capacity
Battery Life
Typical
Temperature
Humidity
Dimensions
Physical Characteristics
80188 compatible
512 KB Embedded Flash ROM
512 KB SRAM
10/100Base-T
RS-232
9600 bps
Yes
Yes
Yes
3 hr
Li-Ion
1800 mAh (full charged, for 45 ~ 50 minutes operation, depending on system configuration)
1 year @ 20° C, 80% capacity after 500 cycles of charge and discharge
5 V @ 550 mA
Operating
Non-Operating
0 ~ 60° C (-32 ~ 140° F)
-20 ~ 70° C (4 ~ 158° F)
5 ~ 95 % RH, non-condensing
Kernel module: 40.5 x 93 mm (1.59" x 3.66")
Carrier board: 55 x 115 mm (2.17" x 4.53")
PCI/ISA I/O extension module: 175 x 107 mm (6.89" x 4.21")
Ordering Information
Part Number
SNMP-1000-E1B1
SNMP-1000-E2B1
Description
SNMP/HTTP system manager development kit, including the kernel module mounted on a PCI/ISA carrier board, 3 sets of temperature sensors,
and cables
SNMP/HTTP system manager card for ACP series chassis, including the kernel module
* Compatible with Advantech chassis series: IPC-622, IPC-623, IPC-7143, IPC-7220 and all ACP series chassis (except ACP-1000P2/X2)
Online Download www.advantech.com/products