Miele SOFTTRONIC W 1215 Operating instructions

Operating instructions
Washer
W 1215
To prevent accidents and
machine damage,
read these instructions
before installation or use.
UV
M.-Nr. 05 874 920
Contents
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Guide to the washer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Before using for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Using the washer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1. Prepare and sort the laundry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2. Load the laundry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3. Select a program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Program guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4. Select wash options (if needed) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5. Select the temperature and spin speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
6. Add detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Water softener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Fabric softener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Starch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Fabric dye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Using the washer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
7. Select Delay Start (if needed) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
8. Start the program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
9. Activate the program lock (if necessary) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
10. Remove the laundry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Cancelling a program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Interrupting a program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Making changes to the program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Adding/removing laundry during a wash program . . . . . . . . . . . . . . . . . . . . . . . . 22
Locking the washer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Electronic program lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Child Safety Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Washer care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Cleaning the washer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Cleaning the detergent drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Cleaning the drain pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Quick Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Center pages
2
Contents
Washer care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Cleaning the water inlet filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Cleaning the inlet hose filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Cleaning the filter in the inlet valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
A wash program cannot be started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
The program was interrupted and a fault message appears. . . . . . . . . . . . . . . . . 29
General issues with the washer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Poor wash results. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
The door will not open when the "Door" button is pressed. . . . . . . . . . . . . . . . . . . 32
Opening the drum door during a power failure . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Technical Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
PC Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Warranty terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Help protect our environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Front view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Back view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Installation site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Remove the shipping struts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Installing the shipping struts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Level the washer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Installation beneath a counter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Washer stand with drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Washer/ Dryer Stack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Plumbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Water connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
3
IMPORTANT SAFETY INSTRUCTIONS
,WARNING - To reduce the risk
of fire, electric shock or injury to
persons while using your appliance,
follow basic safety precautions,
including the following:
Read all instructions before using
the appliance.
GROUNDING INSTRUCTIONS
This appliance must be grounded.
In the event of malfunction or
breakdown, grounding will reduce the
risk of electric shock by providing a
path of least resistance for electric
current. This appliance is equipped
with a cord having an
equipment-grounding conductor and a
grounding plug. The plug must be
plugged into an appropriate outlet that
is properly installed and grounded in
accordance with all local codes and
ordinances.
WARNING - Improper connection
of the equipment-grounding
conductor can result in a risk of electric
shock. Check with a qualified
electrician or serviceman if you are in
doubt as to whether the appliance is
properly grounded.
Do not modify the plug provided
with the appliance - if it will not fit
the outlet, have a proper outlet installed
by a qualified electrician.
Do not wash articles that have
been previously cleaned in,
washed in, soaked in or spotted with
gasoline, dry-cleaning solvents or other
flammable or explosive substances.
4
These articles give off vapors that could
ignite or explode. Do not add these
items to the washload.
Under certain conditions, hydrogen
gas may be produced in a hot
water system that has not been used
for 2 weeks or more. HYDROGEN GAS
IS EXPLOSIVE. If the hot water system
has not been used for such a period,
turn on all hot water faucets and let the
water flow from each for several
minutes before using the washing
machine. This will release any built up
hydrogen gas. Do not smoke or use an
open flame during this time, as the gas
is flammable .
Do not allow children to play on or
in the appliance. Close supervision
is necessary when the appliance is
used near children.
Before the appliance is removed
from service or discarded, remove
the door.
Do not reach into the appliance if
the drum is moving.
Do not install or store this
appliance where it will be exposed
to the weather.
Do not tamper with
the controls.
Do not repair or replace any part of
the appliance or attempt any
servicing unless specifically
recommended in these operating
instructions.
SAVE THESE INSTRUCTIONS
Guide to the washer
Control panel
a Program selection buttons eFor selecting a program.
b Wash options
Special features to enhance a wash
program.
c Temperature button
For selecting the desired wash
temperature.
f Program sequence display
Shows the currect cycle of the wash
program.
g "Buzzer" button
h FAULT-indicators
i "Delay Start" button
For delaying the start of a program.
d Spin speed button
For selecting the desired spin speed.
j "Start/Stop" button T
Begins the wash program or
interrupts a program.
e PC Indicator
Allows a service technician to check
and update the wash programs.
k "On/Off" button
Turns the machine on and off.
l "Door" button
Opens the drum door.
m Display (h min)
Shows the delayed start time and the
countdown to the end of the
program.
5
Before using for the first time
The appliance must be correctly
installed and connected before the
first use. Please see the "Installation
instructions".
For safety reasons, it is not possible to
run a spin cycle before the first use. A
program must be run without laundry
and without detergent to flush out any
residual water from the factory testing
process, as well as to activate the spin
cycle. Using detergent can cause
sudsing and ball valve activation,
resulting in the future maximum use of
detergent.
^ Turn on the water valve.
^ Press the "On/Off" button.
^ Select the "Extra White" program with
the program buttons.
^ Press the "Start/Stop" button T.
Once the program ends, the washer
can be used for laundry.
6
Using the washer
1. Prepare and sort the laundry
General tips
^ Empty all pockets.
– Dark fabrics often bleed the first few
times they are washed. They should
be washed seperately several times
before being included in a mixed
load.
,Foreign objects left in pockets
(e.g. nails, coins, paper clips, etc.)
can cause damage to clothes and
the machine.
^ Sort the laundry.
– Remove any lead weights or strips
from curtains before washing.
– Loose undergarment underwires
should be removed or sewn in place
before washing.
– Woolens and knitted garments
should be turned inside out.
– Close zippers, hooks and eyelets
before washing.
– Comforter covers and pillowcases
should be fastened in order to
prevent small items from rolling
inside of them.
Only wash items in the machine that are
labeled machine washable by the
manufacturer. Most garments have a
fabric care label in the collar or side
seam. Sort the laundry by care label
and color.
Do not machine wash items if it is not
recommended on the fabric care label.
^ Pretreat stains.
Tough stains (e.g. blood, egg, coffee,
tea, etc.) or badly soiled areas (e.g.
collars and cuffs) should be penetrated
with a stain remover or a paste made
from powdered detergent and warm
water.
,Do not use chemical solvents in
the machine.
7
Using the washer
2. Load the laundry
3. Select a program
^ Turn on the washer using the "On/Off"
button.
^ Open the drum door using the "Door"
button.
^ Load the laundry into the drum. For
best results, wash mixed loads of
small and large items. This will
improve washing effectiveness and
help distribute the load evenly.
Note: Overloading the washer will
cause poor wash results and wrinkling.
^ Close the drum door.
To prevent damage to the door seal
and clothing, make sure that there
are no clothes caught between the
drum door and the seal.
8
^ Press the "PROGRAMS" button e or
- until the desired program indicator
lights.
Using the washer
Program guide
Temperatures
Fabric
care
symbol
Spin
speed
Normal
Options: Extended, Heavy Soil, Soak, Sensitive
Hot
8
Very Warm
E
C
Warm
7
B
Cold
6
A
No Heat
e
Wrinkle-free
Options: Extended, Heavy Soil, Soak, Sensitive
Hot
8
Very Warm
E
C
Warm
7
B
Cold
6
A
No Heat
e
Sanitize
Options: Extended, Heavy Soil, Soak, Sensitive
Sanitize
9
Max
Very Hot
ö
High
Extra White
Options: Extended, Heavy Soil, Soak
Sanitize
9
Max
Very Hot
ö
High
Hot
8
Delicates
Options: Extended, Heavy Soil, Soak
Warm
7
B
Cold
6
A
No Heat
e
Max
High
Med
Low
Laundry
For a rapid wash of colorfast items and
mixed loads made from cottons and
linen, e.g. jeans, t-shirts, underwear,
socks.
For cotton blends, polyester blends
and synthetics (e.g. acrylic, nylon,
ramie). Fabric softener can be
dispensed in the final rinse of these
programs to reduce static cling.
For white items with special hygienic
demands, e.g. baby clothing,
underwear, towels.
For white items without special
hygienic demands.
For delicate machine washable
clothing, e.g. satin, hosiery, lingerie,
lace or crocheted (non-wool) items.
9
Using the washer
Temperatures
Fabric
care
symbol
Woolens /
Options: Sensitive
Warm
7
B
High
Cold
6
A
Med
No Heat
e
Silk
Options: Sensitive
Cold
6
No Heat
e
Handwash /
Options: Extended, Heavy soil, Sensitive
Warm
7
B
Cold
6
A
No Heat
e
Sturdy
Options: None
Warm
7
Cold
6
No Heat
e
Custom
Options: Extended, Heavy Soil, Soak, Sensitive
Sanitize
9
Max
Very Hot
ö
High
Hot
8
Med
Very Warm
E
C
Low
Warm
7
B
Slow
Cold
6
A
Hold
No Heat
e
10
Spin
speed
A
Slow
Laundry
For hand washable and machine
washable wool and wool blends.
For hand washable and machine
washable silks and other non-wool
handwashable garments.
Med
For handwashable items with no wool
or silk content.
B
Med
A
Low
For a mixed load of colorfast or perma
press items, or for cotton blends.
No Spin
All options can be selected individually
for colorfast or white items.
Using the washer
4. Select wash options
(if needed)
The upper button selects the following
"OPTIONS":
Extended
For laundry with normal to heavy soiling
or stains.
– Extended
The main wash cycle time for the wash
program will be extended.
– Extended and Heavy Soil
Heavy Soil
– Extended and Soak
For heavily soiled laundry where a
pretreatment is necessary to remove
surface soiling.
– Heavy Soil
– Soak
– no selection
Soak
The lower button selects the "Sensitive"
options.
For heavy soiling and stubborn stains
(e.g. blood, grease, chocolate) that
require soaking before the main wash.
The preset soak time is 2 hours.
Sensitive
An additional final rinse that will wash
away detergent residue and scents.
Buzzer
A buzzer signals the end of the wash
program, or after "No spin".
^ Select the desired "OPTIONS". Press
the upper button until the indicator of
the desired wash option lights.
See the Program Guide to determine
which options can be selected in each
program.
The buzzer will sound until the washer
is turned off. Once activated, the
buzzer is active in all programs unless
turned off.
The warning sound (indicating a fault
has occured) will activate independent
of whether the buzzer is turned on or
off.
If a wash option is chosen and it is not
compatible with the program, the
indicator light will go out when the
button is released.
11
Using the washer
5. Select the temperature and
spin speed
The default temperature and spin
speed will automatically be selected for
each program. However, you can adjust
the temperature and spin speed within
the parameters of the selected wash
program.
^ Press the "TEMP" and "SPIN" buttons
until the indicator of the desired
setting lights.
12
Program
Spin speed
Normal
High
Wrinkle Free
Med
Sanitize
High
Extra White
High
Delicates
Low
Woolens /
High
Silk /
Slow
Handwash /
Med
Sturdy
Med
Custom
Med-no Spin
The laundry is spun after the main
wash and between the rinse cycles.
Reducing the final spin speed will also
reduce the rinse spin speeds. If in the
programs "Sturdy" and "Custom" a spin
speed lower that "Med" is selected, an
extra rinse cycle is added to remove
any detergent left in the laundry.
Using the washer
Special spin options
No spin
Hold
^ Select "No spin".
^ Select "Hold".
The laundry is not spun and remains
soaking in water. This will prevent
wrinkles if the laundry is not removed
immediately at the end of the wash
program.
– To start the final spin:
The laundry is not spun after the final
rinse, but the water is drained away.
After the drain cycle, the washer goes
immediately into the anti-crease cycle.
Spinning between these rinses is also
omitted in this setting. If "No spin" is
selected in the programs "Sturdy" and
"Custom", an extra rinse cycle is
added.
The washer is set to default to the
maximum spin speed of the wash
program. You can select a lower spin
speed. Start the final spin with the
"Start/Stop" T button.
– To finish the program:
Press the "Door" button. The water
will be drained away.
– Use the "Door" button to open the
door.
13
Using the washer
6. Add detergent
For optimum wash results, it is
important to use the correct amount of
detergent.
Too little detergent may cause
– Ineffective cleaning of laundry;
fabrics may become gray and stiff
over time.
– Grease stains on the laundry.
– Hard water deposits on the heating
element.
Too much detergent may cause
– Oversudsing with minimal drum
movement; poor wash, rinse and
spin results.
– Higher water consumption through
an automatic, additional rinse cycle.
– Higher environmental burden.
^ Pull out the detergent dispenser
drawer and add detergent to the
compartments.
j = Detergent for the main wash
i = Only add detergent (1/4 of the
total recommended amount of
detergent) to this compartment
if the "Heavy Soil" wash option
is selected.
§
= Fabric softener or liquid starch.
^ Close the detergent dispenser
drawer.
,Do not use detergents
containing chemical solvents.
14
Detergent
Use only high-efficiency, low
sudsing laundry detergent
formulated for front loading washing
machines.
For wool and wool blend fabrics, use a
detergent specially formulated for
woolens.
Follow instructions on the detergent
packaging for the correct use and
amount of detergent. Adjust the amount
of detergent if the load is smaller or
more or less soiled than normal.
Add detergent to the main wash
compartment j at the beginning of
each wash program.
Only add detergent (1/4 total
recommended amount) to compartment
i if the "Heavy Soil" option was
selected.
The amount of detergent used
depends on the level of soiling:
Light soiling
No soiling or stains are visible.
Normal soiling
Some visible soiling or a few light
stains.
Heavy soiling
Very visible soiling or stains.
The size of the load and the water
hardness level in your area have an
impact on the amount of detergent
necessary to obtain optimum wash
results. If you do not know the water
level hardness in your area, contact
your local water authority.
^ If you are using liquid detergent and
select the "Heavy Soil" option, use the
liquid detergent insert in the main
wash compartment j. This will
prevent the detergent for the main
wash from being used during the
prewash.
,Do not use chlorine bleach!
15
Detergent
Water hardness
Hardness
level
Water
quality
German
Water
hardness hardness
°d
in mmol/l
0 - 1.3
0-7
I
soft
II
moderate
1.3 - 2.5
7 - 14
III
hard to
very hard
over 2.5
over 14
Water softener
If the water hardness level is between II
and III, you can soften the water to
reduce detergent consumption.
The detergent packaging should
indicate the correct amount to use in
your machine. Add the detergent, then
add the water softener. You can then
use the recommended amount of
detergent for water hardness level I.
16
Detergent
Fabric softener
Fabric softener added to the wash
program will make fabrics feel softer
and will reduce static cling in the dryer.
Never mix fabric softener and starch
together in the fabric softener
compartment §. This will clog the
dispenser.
^ Open the lid of the fabric softener
compartment §.
^ Pour the amount of liquid fabric
softener into the compartment
according to the manufacturer’s
instructions. Do not exceed the
maximum fill level marked inside the
compartment, as the excess will
prematurely activate the siphon and
be wasted.
^ Close the compartment lid and push
in the dispenser drawer.
The fabric softener will automatically be
dispensed during the final rinse cycle.
A small amount of water will remain in
the compartment at the end of the
program.
17
Detergent
Starch
Mild liquid starch is a synthetic starch
wash used to give fabrics some
stiffness. Starching can be included in
any wash program as part of the final
rinse.
^ Open the fabric softener
compartment §.
^ Add the recommended amount of
starch to the compartment.
Do not exceed the maximum level
mark.
^ Close the compartment lid and push
in the dispenser drawer.
^ The starch will be dispensed during
the final rinse.
At the end of the program, a small
amount of water will remain in the fabric
softener compartment.
18
Fabric dye
Do not use fabric dyes in this
washer!
Using the washer
7. Select Delay Start (if needed) 8. Start the program
If you wish, the start of the wash
program can be delayed to take
advantage of lower energy rates, or to
have a load completed at a later time.
Delay start allows you to delay the start
of a program from 30 minutes to a
maximum of 24 hours.
^ Press the "Delay Start" button. The
Delay Start time will be extended with
each press of the button.
– For less than a 10 hour delay, the
delay time extends in 30 minute
increments.
– For more than a 10 hour delay, the
delay time extends in 1 hour
increments.
^ Press the flashing "Start/Stop T"
button to begin the program.
The display shows the maximum
program run time. It will count down in
minutes. For the first 10 minutes, the
washer calculates the water
absorbency of the laundry. The overall
program time might be shortened or
lengthened.
9. Activate the program lock
(if necessary)
^ Press the "START" button until the
"Child Lock" indicator lights up.
See "Locking the washer" for further
details.
Cancelling Delay Start
^ If the display shows 24, press "Delay
Start" again.
19
Using the washer
10. Remove the laundry
The "Status" indicator "Anti-Crease /
End" will be displayed at the end of a
program.
^ Use the "Door" button to open the
drum door.
Do not attempt to remove laundry
from the washer if the drum is
turning. You may seriously injure
yourself. If the drum turns with the
door open, contact Miele’s Technical
Service Department.
^ Remove the laundry.
^ Check the folds of the door seal for
any small articles which may have
been trapped.
Check the drum for any missed
pieces of laundry. Items
inadvertently left in the washer may
be damaged (e.g. shrink or discolor)
during the next wash cycle.
^ Turn the washer off using the "On/Off"
button.
^ Close the drum door.
20
Using the washer
Cancelling a program
You can cancel a wash program any
time after a program starts.
^ Press the "Start/Stop T" button.
The washer drains the wash water away
and the program is cancelled.
To add or remove laundry
^ Press the "Door" button.
To select another program
^ Turn off the washer using the "On/Off"
button.
Making changes to the
program
– A program change is not possible
after a program has started. To select
a different program, the started
program must be canceled.
– The buzzer can be turned on or off.
– A spin speed can be selected until
the final spin speed start.
No changes can be made if the
program lock is activated.
^ Turn on the washer using the "On/Off"
button.
Interrupting a program
^ Turn off the washer using the "On/Off"
button.
To continue the program
^ Turn on the washer using the "On/Off"
button.
21
Using the washer
Adding/removing laundry
during a wash program
You can interrupt the following
programs to add or remove a piece of
laundry:
– Normal
– Wrinkle-free
– Sturdy
^ Use the "Door" button to open the
door.
^ Add or remove the piece of laundry.
^ Close the drum door.
The program will continue
automatically.
Note
Once the program has started, the
washer cannot make adjustments for
the load size.
After adding or removing laundry, the
washer will default to the water and
electrical consumption of a full load.
The time remaining will automatically
adjust.
22
The drum door cannot be opened if:
– the water temperature is greater than
130°F (55°C).
– the water level is too high.
– the final spin speed has started.
– the program lock is activated.
If you press the "Door" button during
any of these conditions, the "Child
Lock" indicator will light.
Locking the washer
Electronic program lock
Child Safety Lock
The program lock prevents the washer
from being opened or the program,
temperature or spin speed from being
changed during a wash program.
The Child Safety Lock can be activated
to prevent a child from climbing inside
the washer.
To activate the program lock
^ Once the wash program has started,
hold the "Start/Stop T" button until
the "Child Lock" indicator illuminates.
The program lock is now activated.
The washer can no longer accept
program changes.
At the end of the program, the program
lock is automatically unlocked.
To cancel the program lock
^ Hold the "Start/Stop T" button until
the "Child Lock" indicator goes out.
When the Child Safety Lock is
activated, the drum door cannot be
opened and a program cannot be
started.
To activate the Child Safety Lock
Before activating the lock:
– The washer must be turned off.
– The drum door must be closed.
1. Press and hold the "Sensitive" and
"TEMP" buttons until step 4.
2. Turn on the washer using the "On/Off"
button.
3. Press the "Extended / Heavy Soil /
Soak" button three times.
4. Release the "Sensitive" and "TEMP"
buttons.
The "Child lock" indicator flashes.
5. Turn off the washer with the "On/Off"
button.
To deactivate the Child Safety Lock
Repeat steps 1. through 4.
The "Child Lock" indicator goes out.
23
Washer care
,Before cleaning the appliance,
disconnect the power supply by
unplugging the unit or manually
tripping the circuit breaker.
Cleaning the washer
^ Clean the exterior of the washer with
a mild solution of non-abrasive
detergent or soap and water. Wipe
dry with a soft cloth.
^ Clean the drum with a stainless steel
cleaner specially formulated for use
in a washing machine. This type of
cleaner is available from Miele’s
Technical Service Department.
Cleaning the detergent drawer
Detergent residue should be cleaned
out regularly.
^ Clean the siphon tube.
1. Remove the siphon tube from the
fabric softener compartment § and
rinse under warm water. Clean the pipe
on which the siphon tube is attached.
2.Replace the siphon tube.
,Do not use chemical solvents,
abrasive cleaners, glass or all
purpose cleaners. These can
damage plastic surfaces and other
parts.
^ Pull out the detergent drawer as far
as it will go. Press down on the red
release lever and pull the drawer out
of the machine.
^ Clean the detergent drawer with
warm water.
24
Washer care
Cleaning the drain pump
Occasionally, small objects (buttons,
coins, etc.) may become trapped in the
lint trap. If the machine does not drain
completely, the lint trap should be
checked to ensure that it is free of
foreign objects.
^ Turn off the appliance with the
"On/Off" button.
If the main drain hose is clogged, water
will be retained in the machine (a
maximum amount of 6.5 gal [25 l]).
,Caution: If laundry has been
washed at a high temperature, the
water draining out of the machine
will still be hot! Allow it to cool before
proceeding.
^ Turn the lint trap lid counterclockwise.
Do not remove it. About 2 quarts of
water will drain out of the hose.
If additional water remains in the
machine, tighten the lint trap lid and
empty the container. Repeat this
procedure as often as necessary.
^ To clean the lint trap, remove the tool
from behind the detergent dispenser
drawer.
^ Open the drain filter door.
25
Washer care
Once the flow of water stops:
^ Remove the drain filter lid.
^ Check that the drain pump impeller
(in the back of the chamber) rotates
freely by spinning with your hand.
^ Remove any foreign objects or lint
from the filter.
^ Return the drain filter and tighten into
place.
,If the drain filter is not tightened
securely, water will leak out when the
machine is used.
26
Quick Guide
Remove this guide for easy reference
Please read all
instructions, especially
the "Important Safety Instructions",
before using the washer.
Quick Guide
1. Sort the laundry.
^ Empty all pockets.
^ Sort the laundry by fabric and color.
^ Pretreat stains.
2. Load the laundry
3. Select a program
^ Select a desired program.
Refer to the "Program guide" to
determine which program is most
suitable for the load being washed.
4.Select wash options (if needed)
^ Turn on the washer using the "On/Off"
button.
^ Open the drum door by using the
"Door" button.
^ Load the laundry.
^ Close the drum door.
^ Press the upper button until the
indicator of the desired wash option
lights.
Make sure clothes will not be caught by
the door.
^ Press the lower button to select the
"Sensitive" wash option.
Quick Guide
5. Select the temperature and spin
speed
7. Select Delay Start (if needed)
^ Press the "Delay Start" button.
8. Start the program
^ Press the "Start/Stop" T button.
^ Press the "TEMP" and "SPIN" buttons
until the indicator of the desired value
lights.
6. Add detergent
9. Activate the program lock
(if necessary)
^ Hold the "START" button until the
"Child Lock" indicator lights up.
10. Unload the laundry
^ Open the drum door using the "Door"
button.
^ Remove the laundry.
^ Place the recommended amount of
detergent into the main wash
compartment j. If "Heavy Soil" is
selected, add 1/4 of the total amount
of detergent to the i compartment.
Place fabric softener or liquid starch
in compartment §.
^ Turn off the washer using the "On/Off"
button.
^ Close the drum door.
Quick Guide
Program guide
Woolens /
Normal
Options:
Extended, Heavy Soil, Soak, Sensitive
Temperatures:
Hot 8, Very Warm EC, Warm 7B,
Cold 6A, No Heat e
Spin speeds: Max, High
Items:
For a quick load of colorfast items.
Wrinkle Free
Options: Sensitive
Temperatures:
Warm 7B, Cold 6A, No Heat e
Spin speed: High, Med
Items:
For hand washable and machine washable
wool.
Silk
Options: Sensitive
Options:
Extended, Heavy Soil, Soak, Sensitive
Temperatures: Cold 6A, No Heat e
Temperatures:
Hot 8, Very Warm EC, Warm 7B,
Cold 6A, No Heat e
Items:
For silk items.
Spin speed: Med
Items:
For clothing that tends to wrinkle easily.
Sanitize
Options:
Extended, Heavy Soil, Soak, Sensitive
Temperatures:
Sanitize 9, Very Hot ö
Spin speeds: Max, High
Items:
For a load of whites with special hygienic
demands.
Extra White
Options: Soak, PreWash, Intensive
Temperatures:
Sanitize 9, Very Hot ö, Hot 8
Spin speeds: Max, High
Items:
Spin speed: Slow
Handwash /
Options: Extended, Heavy soil, Sensitive
Temperatures:
Warm 7B, Cold 6A, No Heat
Spin speed: Med
Items:
For handwashable items with no wool or silk
content.
Sturdy
Options: None
Temperatures:
Warm 7B, Cold 6A, No Heat e
Spin speeds:
Med, Low
Items:
For a quick, mixed load of colorfast items.
Custom
Options:
Extended, Heavy Soil, Soak, Sensitive
Options: Soak, Prewash, Intensive
Temperatures:
Sanitize 9, Very Hot ö, Hot 8, Very Warm
EC, Warm 7B, Cold 6A, No Heat e
Temperatures:
Warm 7B, Cold 6A, No Heat
Spin speeds:
Med, Low, Slow, Hold, No Spin
Spin speed: Low
Items:
All options can be selected individually for
colorfast or white items.
Delicates
Items:
For delicate clothing that wrinkles easily.
Washer care
Cleaning the water inlet filters
The washer has two water inlet filters to
protect each inlet valve. These filters
should be checked every 6 months and
cleaned, if necessary. (This may need
to be performed more frequently with
some water supplies).
Cleaning the inlet hose filter
^ Turn off the water valve.
,Inspect the hose regularly.
The
hose must be in good condition to
withstand high water pressure. The
hose should be replaced if there are
cracks in the surface, or if it has
been otherwise damaged or cut.
Cleaning the filter in the inlet
valve
^ Using a wrench, carefully loosen and
remove the plastic hose connector on
the inlet valve.
^ Using needle nose pliers, remove the
plastic filter by pulling on the bar (see
illustration). Rinse under water and
return parts.
Both filters must be put back in
place after cleaning.
^ Unscrew the inlet hose from the valve
by turning the connector
counterclockwise using a wrench, if
necessary.
^ Remove the rubber seal, 1, from the
connector.
^ Using needle nose pliers, grasp the
plastic filter, 2, and pull it out of the
hose connector.
^ Clean the filter under running water
and carefully remove any large
particles. Replace the filter and seal
and reconnect the hose.
^ Slowly turn on the valve and check
for leaks.
27
Frequently asked questions
, Repairs to electrical appliances must only be carried out by a qualified
and trained person in accordance with local and national safety regulations.
Repairs and other work by unqualified persons could be dangerous. The
manufacturer cannot be held responsible for unauthorized work.
The following section will help you avoid placing a service call by identifying
issues you may encounter while operating the machine:
A wash program cannot be started
Issue
Possible cause
The display stays
The washer has no
blank and no indicator power.
illuminates.
Solution
Check to determine if:
– the washer is plugged in.
– the circuit breaker has been
tripped.
The electronic lock
function is activated.
The door is not
The program will not
start after pressing the properly closed.
"Start/Stop T" button.
Deactivate the lock function.
The "Child Lock"
indicator flashes.
28
Close the drum door.
Frequently asked questions
The program was interrupted and a fault message appears.
Issue
The buzzer sounds, and
the "Drain" indicator
flashes.
"- - -". appears in the
display.
The buzzer sounds, and
the "Intake" indicator
flashes.
"- - -". appears in the
display.
The buzzer sounds, and
the "Intake" and "Drain"
indicators flash.
"- - -". appears in the
display.
The buzzer sounds and
the "Soak" and "Rinse"
indicators flash. "- - -".
appears in the display.
Possible cause
Solution*
The drain is blocked. Clean the drain pump and
lint trap. See "Washer care Cleaning the drain pump
and lint trap".
The drain hose is too The maximum drain pump
high.
height should not exceed 4ft.
(1.2 m).
The water intake is
Check to determine if:
blocked.
– the water valve is open.
– the inlet hose is kinked.
The inlet hose filter is Clean the filter under running
dirty.
water and carefully remove
any large particles.
There is a fault.
Call the Miele Service
Department.
There is a fault.
Restart the program.
If the fault message appears
again, call Miele’s Technical
Service Department.
* To turn off the fault message: Turn off the washer using the "On/Off" button.
29
Frequently asked questions
General issues with the washer
Issue
The "Oversudsing"
indicator lights.
The Main wash"
indicator flashes.
Possible cause
The machine has
oversudsed.
There is a fault.
Solution
Use less detergent in the
next wash program.
Restart the program.
If the fault message appears
again, call Miele’s Technical
Service Department.
The washer’s four feet Level the machine (see
are not resting evenly Installation Instructions.)
on the floor.
There are unusual
There is no fault. Lapping sounds at the beginning
sounds coming from the and end of the pump process are normal.
drain pump.
A large amount of
The water pressure is – Clean the water intake
too low.
hose filter under running
detergent residue
water and carefully
remains in the
dispenser drawer.
remove any large
particles.
– Select the "Sensitive"
button.
The fabric softener is
The siphon tube is
Clean the siphon tube (see
incorrectly positioned "Cleaning and carenot completely
dispensed, or too much or clogged.
"Cleaning the detergent
dispenser drawer").
water remains in the
fabric softener
compartment §.
The washer shakes
during the spin cycle.
30
Frequently asked questions
Poor wash results
Issue
Possible cause
Solution
The wash does not Liquid detergents do not – Use powdered bleach.
come clean with
contain bleaching
– Do not put liquid detergent
liquid detergent.
agents. Fruit, coffee or
and stain remover together in
tea stains cannot be
the same washcompartment.
effectively removed.
Laundry has a gray, An inadequate amount
– Add more detergent to the
laundry or use a liquid
sticky residue.
of detergent was used to
dissolve greasy deposits
detergent.
in heavily soiled laundry – Run a "Normal - Hot" program
(e.g. grease, oils or
with liquid detergent to clean
lotion stains).
the washer before using it for
laundry again.
There is white
The detergent was not
– After drying, remove white
detergent residue
completely dissolved
residue with a clothing brush.
on dark laundry.
because of hard water.
– Add a water softener to the
detergent for future loads.
31
Frequently asked questions
The door will not open when the "Door" button is pressed.
Possible cause
The washer is not hooked
up to electricity.
The washer is not turned
on.
The program lock is
activated.
The Child Lock function is
activated.
Power failure
Solution
Insert the plug into the outlet.
Turn on the washer using the "On/Off" button.
Deactivate the program lock as described in
"Locking the washer - Electronic program lock".
Deactivate the Child Safety Lock as described in
"Locking the washer - Child Safety Lock".
To open the the drum door, see "Frequently asked
questions - Opening the drum door during a power
failure."
The door was not properly Push on the drum door and at the same time, press
closed.
the "Door" button.
There is still water in the
Clean the drain filter and the drain pump as
drum and the washer
described in "Cleaning and Care - Cleaning the
cannot drain it away.
drain pump".
As a safeguard against scalding, the drum door cannot be opened if the wash
water temperature is over 130°F (55°C).
32
Frequently asked questions
Opening the drum door during
a power failure
^ Open the detergent dispenser
drawer.
^ Remove the tool.
,Make sure the machine is turned
off and the drum has stopped
turning. A moving drum is
dangerous.
^ To open the door, pull down on the
ring in the upper right corner of the
access area.
^ Open the lint trap door.
^ Drain the water from the washer as
described in "Washer care /
"Cleaning the drain pump and lint
trap."
33
Technical Service
Repairs
PC Update
In the event of any faults which you
cannot fix yourself, please contact the
Miele Technical Service Department
The indicator marked PC allows a
technician to make use of new
technology if new programs are
developed or new fabrics are
introduced.
U
1-800-999-1360
techserv@mieleusa.com
l
1 800 565-6435
service@miele.ca
When contacting the Technical Service
Department, please quote the model
and serial number of your appliance.
Both can be found on the dataplate
visible above the front glass on the
inside of the door.
34
Warranty terms
The washer is covered by the warranty
for 2 years from the date of installation.
See the Warranty booklet for details.
Optional accessories
Optional accessories are available at
your Miele dealer or through Miele’s
Technical Service Department.
INSTALLATION INSTRUCTIONS
Help protect our environment
Disposal of the packing
material
The cardboard box and packing
materials protect the appliance during
shipping. They have been designed to
be biodegradable and recyclable.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of children, as
they pose a danger of suffocation.
36
Disposal of an appliance
Old appliances may contain materials
that can be recycled. Please contact
your local recycling authority about the
possibilty of recycling these materials.
Ensure that the appliance presents no
danger to children while being stored
for disposal. Before discarding an
appliance, unplug it from the outlet, cut
off its power cord and remove any
doors to prevent hazards.
Installation
Front view
a Hot water intake hose
h Control panel
b Cold water intake hose
i Detergent dispenser drawer
c Power cord
j Drum door
d - g Drain hose (with adjustable and
removable elbow) showing drain
options
k Access panel to drain filter and drain
pump
l Recessed grip
m Four height- adjustable feet
37
Installation
Back view
a Lid excess end with transport grips
e Drain hose
b Power cord
f Shipping struts with rotary protection
c Cold water intake hose
g Mounting for:
d Hot water intake hose
– Water intake hose
– Drain hose
– Power cord
– Shipping struts
38
Installation
Installation site
A concrete or reinforced floor is the
most suitable surface for the washer.
These types of floors are less prone to
vibration during the spin cycle.
Note:
– The machine must be leveled and
securely positioned.
– To avoid vibration while spinning, the
machine should not be installed on
soft floor coverings.
,If the machine is installed on a
raised platform, it must be secured
with retaining clips. These clips are
available from your dealer or the
Miele Technical Service Department.
If installed on a masonary or
concrete base, the base should
have a 1/2" to 3/4" (12-20 mm) high
rim. This is required to prevent the
washer from vibrating off the stand
during the spin cycle.
If the installation must be performed on
a wooden floor:
^ Install the unit on a
23 1/4" x 20 1/2" x 1 3/16"
(59 x 52 x 3 cm) plywood base.
Ideally, the base should be large
enough to span several joists, and
should be anchored to the joists, not
just the floor boards.
It is best to install the washer in the
corner of a room, where the stability of
the floor is at its greatest.
39
Installation
Installation
Remove the shipping struts
^ Lift the machine from its shipping
pallet and move it to the installation
site.
Do not lift the washer by the drum
door!
,Ensure that the machine’s feet
and the floor are dry to prevent
slippage during the spin cycle.
^ Remove the left and right rotary
protection.
1. Unhook the rotary protection with a
screw driver.
2. Remove the rotary protection.
40
Installation
^ Turn the left shipping strut
counterclockwise 90° with the
enclosed combination wrench.
^ Turn the right shipping strut
counterclockwise 90° with the
enclosed combination wrench.
^ Pull out the shipping strut.
^ Pull out the shipping strut.
41
Installation
Installing the shipping struts
Reinstall the struts by reversing the
above procedure.
^ Close the holes with the rotary
protection and their caps.
^ Fasten the shipping struts at the rear
side of the washer. Take care to insert
the drill holes b onto the spigot a.
,Do not move the washer without
the shipping struts in place.
The shipping struts should be stored
in a safe place for future use. They
must be reinstalled before moving
the machine.
42
Installation
Level the washer
To ensure smooth operation, the washer
must be level.
Failure to level the machine can result
in increased water and energy
consumption, loud noise during the
spin cycle or "walking" across the floor
during use.
Adjust the four leveling feet
The washer is levelled by adjusting the
four feet:
^ Tip the machine slightly and place a
support, such as a block of wood,
underneath it.
^ Unscrew each of the four feet as
much as necessary by turning both
the foot, 1, as well as the locking ring,
2, to the left using a screwdriver.
^ Turn the locking ring, 2,
counterclockwise with the enclosed
combination wrench. Unscrew each
of the four feet as much as necessary
by turning both the foot, 1, as well as
the locking ring, 2, to the left.
^ Check that the machine stands level.
^ Once level, hold the foot, 1, immobile
with a wrench. Turn the locking ring,
2, with the combination wrench
towards the machine.
,All four locking rings must be
tight against the bottom of the
machine. In addition, check to see
that the feet were not inadvertently
unscrewed while tightening the
rings. Running a machine that is not
level or whose feet are not tight may
cause damage to both the machine
and its surrounding area.
,CAUTION: The washer is
extremely heavy. When tipping the
machine, be careful that it does not
slip.
43
Installation
Installation beneath a counter
Washer/ Dryer Stack
If a countertop is placed over the
washer, at least a 1/4" gap must be
left between the top of the machine
and bottom of the countertop;
nothing should be within 1/2" of any
other side of the washing machine.
– When the machine lid needs to be
removed to reduce the height of the
machine, a countertop kit* is
necessary. The cover plate in the
countertop kit replaces the machine
lid and ensures electrical safety.
– A filler frame* is recommenced at a
countertop height of 35 7/16" to
35 13/16" (90-91 cm)
– Water intake, drain and electrical
connections should be installed near
the machine and be easily
accessible.
An installation manual is supplied with
the countertop kit.
(* available from your Miele dealer or
Miele’s Technical Service Department).
Washer stand with drawer
A washer stand is available to raise the
machine for convenience. It has a
drawer to store cleaning essentials.
The stand can be purchased as an
optional accessory.
44
The Miele washing machine can be
installed as part of a washer-dryer
stack in combination with a Miele
tumble dryer. An appropriate "stacking
kit" is required (part # 12 996 026).
(* available from your Miele dealer or
Miele’s Technical Service Department.)
Note:
a Safety distance to the wall:
minimum 13/16" (2 cm)
b Height:
Stacking kit with pull out shelf
66 15/16" (170 cm)
Reinstallation of the machine lid
When reinstalling the machine lid,
check the fit of the cover at the rear
bracket to ensure safe transport.
Plumbing
The washing machine can be
connected to a potable water supply. A
non-return valve is not required unless
required by building code.
The washing machine has 1/2" pressure
hoses with 3/4" female hose thread
connections. If there is no water
hookup, contact a plumber to install a
connection. Make sure that the sealing
ring is seated properly on the hose
connector.
Replace the hose with a genuine Miele
hose only, or with a hose able to
withstand up to 145 psi (10 bar)
pressure. The water valve connector
must also be able to withstand 145 psi
(10 bar).
,The bolted connection is
pressurized by water pressure.
Open the water valve slowly to
check for leaks. Adjust the rubber
seal and the bolted connection if
necessary.
To protect the inlet valve the two
filters - one at the pressure hose /
valve connection and one at the the
inlet connection to the solenoid
valve- must not be removed.
Optional accessory hose extension
Hose extensions with a length of
8’ 2 7/16" to 13’ 1 1/2" (2.5 to 4 m) are
available from your Miele dealer or
Miele’s Technical Service Department.
45
Plumbing
Water connection
Tips for a hot water connection
Connect the cold water intake hose
(blue mark) to the cold water valve and
the hot water intake hose (red mark) to
the hot water valve.
– The hot water temperature from the
hot water valve must not exceed
140°F; the ideal temperature is
130°F.
If the machine is being connected to a
cold water supply only, both the hot
and cold water intake hoses must be
attached to the cold water valve
through the use of a Y adapter
(available at a hardware store). Both
hoses must be connected to a water
source, or the machine will not function
properly. Do not connect the washer
to hot water only.
If there is no water pressure at the hot
water inlet, the unit automatically
switches to cold water after several
minutes.
Turn on the valve(s) and check for
leaks. The water pressure must be
within 15-145 psi (1-10 bar). If the water
pressure is greater that 145 psi
(10 bar), a pressure reducer must be
installed. If the water pressure is below
15 psi (1 bar), there will not be enough
water available for a complete fill.
The water intake hoses are equipped
with screen filters. Do not remove these
filters except for cleaning.
46
Plumbing
Drainage
The 5 foot drain hose may be
connected as follows:
1. Directly into a sink: hook the hose
over the edge of the sink and secure
it firmly (e.g. by tying the hose to the
water faucet).
2. To a stand pipe: place the drain
hose into a 1 1/2" stand pipe and
secure it firmly.
^ The machine drains using a pump
with a maximum delivery height of
4 feet.
^ Make sure there are no kinks in the
drain hose.
If desired, the drain hose may be
extended to run a maximum of 16 feet,
as long as the 4 feet height is not
exceeded. Hose extensions are
available from your dealer or Miele’s
Technical Service Department.
3. To a floor drain: The machine is
equipped with an airgap/
anti-siphoning system so that no
minimum drain height is required.
47
Electrical connection
ELECTRICAL INSTRUCTIONS
GROUNDING INSTRUCTIONS
This appliance must be grounded. In
the event of malfunction or
breakdown, grounding will reduce
the risk of electric shock by
providing a path of least resistance
for electric current. This appliance is
equipped with a cord having an
equipment-grounding conductor
and a grounding plug. The plug
must be plugged into an appropriate
outlet that is properly installed and
grounded in accordance with all
local codes and ordinances.
WARNING – Improper connection of
the equipment-grounding conductor
can result in a risk of electric shock.
Check with a qualified electrician or
service representative if you are in
doubt as to whether the appliance is
properly grounded.
Do not modify the plug provided with
the appliance; if it will not fit the
outlet, have a proper outlet installed
by a qualified electrician.
This installation should be performed
by an experienced and qualified
technician, in accordance with local
codes and regulations.
The washing machine is supplied with a
5’ 3" long, 4 wire cord, ending in a
NEMA 14-30 P plug, ready for
connection to a 120/208-240 V, 15 A, 60
Hz, AC power supply.
The proper outlet can be purchased
from an electrical supply dealer or from
the Miele Technical Service Department
(request a NEMA 14-30 R receptacle).
"EASY INSTALLATION KIT"
If a dedicated 4 wire, 120/208-240 V,
15 Amp line is not available for this
appliance, an optional "Easy Installation
Kit" will allow you to connect to a 240 V,
30 Amp line .
This dual receptacle, wall mounted
connection box can ONLY be used for
connecting a Miele clothes washer and
a Miele clothes dryer to an existing
30 Amp (NEMA 10-30R) outlet.
For more information on the "Easy
Installation Kit," or if you have questions
concerning the electrical connection,
please contact:
48
U
1-800-999-1360
techserv@mieleusa.com
l
1-800-565-6435
service@miele.ca
49
50
51
Alterations rights reserved / 0704
This bio-friendly paper was bleached without the use of chlorine.
M.-Nr. 05 874 920 / 02