Epson | EX50 | User`s guide | Epson EX50 User`s guide

4Set up the remote control
3Plug in and turn on
EX30/EX50/EX70
Quick Setup
1
Open the A/V Mute slide (lens cover).
Before using the projector, read these instructions and the safety instructions in the
User’s Guide on your projector CD-ROM.
1 Unpack the projector
1
Remove the battery cover.
2
Insert the batteries.
3
Replace the battery cover.
EX30/EX50
You should have the following items:
2
onnect the power cord to the projector and plug
C
the other end into an electrical outlet.
EX70
Projector
5Connect your video source
Carrying case
The
power light on the projector turns orange.
Power light
Component-to-VGA
adapter
(EX30/EX50 only)
VGA cable
USB cable
Power cord
Follow these instructions to connect the projector to your computer using
the USB cable (Windows® only), or to your video equipment using an HDMI
cable (EX70 only) or component video cable. For instructions on using
other connection options, see the User’s Guide on your CD-ROM.
Connecting with a USB cable
If you’re connecting a Windows Vista , XP, or 2000 computer to the
®
Projector
remote control
(EX30/EX50)
Password
Protected sticker
Projector
remote control
(EX70)
User’s Guide
CD-ROM
Power button
Batteries
Interface label stickers
(Included for Canada only)
3
4
Canada only: For French speakers, remove sticker(s) from the interface
label backing sheet and place over corresponding text on the control
panel.
2Choose a location
The projector supports 4 viewing setups: front projection, ceiling projection,
rear projection, and rear/ceiling projection. Choose the best one for your
environment. If you install the projector in a rear or overhead position,
you’ll need to choose the correct projection option from the Extended
menu. See the User’s Guide on your CD-ROM for instructions.
The distance between the projector and the screen generally determines the
size of the image, but the size can also vary depending on the aspect ratio
(image shape), how you zoom into the image, and whether you’ve adjusted
other image settings. Depending on the projector model you are using and
the image settings you’ve chosen, you can place the projector anywhere
from 33 to 412 inches (84 to 1047 cm) from the screen.
Use the tables in the User’s Guide or the Image Size calculator on the
Multimedia Projectors page on Epson’s website to help you determine the
proper projection distance.
*411506800*
*411506800*
projector, you can use the USB cable. You don’t need to use the VGA
cable.
Turn on your computer.
ress the
P
power button on the projector or remote control. The
projector beeps, the
power light flashes green, and the projector
warms up. When the
power light stays green, the projector is
ready for use.
4
Connect the square end of the USB cable to the projector’s TypeB
USB port.
Connect the flat end of the cable to any available USB port on your
computer.
Power button
EX70
Turning off the projector
If you’re using a computer, shut it down first, while you can still
see the display.
2
Press the
3
2
3
EX30/EX50
Make sure the projector is turned on.
Turn on your computer or video source.
Power button
1
1
power button on the projector or remote control.
hen you see the confirmation message, press the
W
power button again. The projector beeps twice and the
power light
turns orange.
5
Follow the instructions on your computer screen to install the Epson
USB Display software (you need to install the software only the first
time you connect). After the software has been installed, you see
your computer’s screen displayed by the projector.
NOTE If
you see a “Digital Signature Warning” while installing the
software, select Continue.
You can connect an optional audio cable if you want to play sound through
the projector. See the User’s Guide on your CD-ROM for instructions.
W
ith Epson’s Instant Off® technology, there’s no cool-down period. When
you’re done, just unplug the projector and it’s ready to travel.
Turn over
4Set up the remote control
3Plug in and turn on
EX30/EX50/EX70
Quick Setup
1
Open the A/V Mute slide (lens cover).
Before using the projector, read these instructions and the safety instructions in the
User’s Guide on your projector CD-ROM.
1 Unpack the projector
1
Remove the battery cover.
2
Insert the batteries.
3
Replace the battery cover.
EX30/EX50
You should have the following items:
2
onnect the power cord to the projector and plug
C
the other end into an electrical outlet.
EX70
Projector
5Connect your video source
Carrying case
The
power light on the projector turns orange.
Power light
Component-to-VGA
adapter
(EX30/EX50 only)
VGA cable
USB cable
Power cord
Follow these instructions to connect the projector to your computer using
the USB cable (Windows® only), or to your video equipment using an HDMI
cable (EX70 only) or component video cable. For instructions on using
other connection options, see the User’s Guide on your CD-ROM.
Connecting with a USB cable
If you’re connecting a Windows Vista , XP, or 2000 computer to the
®
Projector
remote control
(EX30/EX50)
Password
Protected sticker
Projector
remote control
(EX70)
User’s Guide
CD-ROM
Power button
Batteries
Interface label stickers
(Included for Canada only)
3
4
Canada only: For French speakers, remove sticker(s) from the interface
label backing sheet and place over corresponding text on the control
panel.
2Choose a location
The projector supports 4 viewing setups: front projection, ceiling projection,
rear projection, and rear/ceiling projection. Choose the best one for your
environment. If you install the projector in a rear or overhead position,
you’ll need to choose the correct projection option from the Extended
menu. See the User’s Guide on your CD-ROM for instructions.
The distance between the projector and the screen generally determines the
size of the image, but the size can also vary depending on the aspect ratio
(image shape), how you zoom into the image, and whether you’ve adjusted
other image settings. Depending on the projector model you are using and
the image settings you’ve chosen, you can place the projector anywhere
from 33 to 412 inches (84 to 1047 cm) from the screen.
Use the tables in the User’s Guide or the Image Size calculator on the
Multimedia Projectors page on Epson’s website to help you determine the
proper projection distance.
*411506800*
*411506800*
projector, you can use the USB cable. You don’t need to use the VGA
cable.
Turn on your computer.
ress the
P
power button on the projector or remote control. The
projector beeps, the
power light flashes green, and the projector
warms up. When the
power light stays green, the projector is
ready for use.
4
Connect the square end of the USB cable to the projector’s TypeB
USB port.
Connect the flat end of the cable to any available USB port on your
computer.
Power button
EX70
Turning off the projector
If you’re using a computer, shut it down first, while you can still
see the display.
2
Press the
3
2
3
EX30/EX50
Make sure the projector is turned on.
Turn on your computer or video source.
Power button
1
1
power button on the projector or remote control.
hen you see the confirmation message, press the
W
power button again. The projector beeps twice and the
power light
turns orange.
5
Follow the instructions on your computer screen to install the Epson
USB Display software (you need to install the software only the first
time you connect). After the software has been installed, you see
your computer’s screen displayed by the projector.
NOTE If
you see a “Digital Signature Warning” while installing the
software, select Continue.
You can connect an optional audio cable if you want to play sound through
the projector. See the User’s Guide on your CD-ROM for instructions.
W
ith Epson’s Instant Off® technology, there’s no cool-down period. When
you’re done, just unplug the projector and it’s ready to travel.
Turn over
4Set up the remote control
3Plug in and turn on
EX30/EX50/EX70
Quick Setup
1
Open the A/V Mute slide (lens cover).
Before using the projector, read these instructions and the safety instructions in the
User’s Guide on your projector CD-ROM.
1 Unpack the projector
1
Remove the battery cover.
2
Insert the batteries.
3
Replace the battery cover.
EX30/EX50
You should have the following items:
2
onnect the power cord to the projector and plug
C
the other end into an electrical outlet.
EX70
Projector
5Connect your video source
Carrying case
The
power light on the projector turns orange.
Power light
Component-to-VGA
adapter
(EX30/EX50 only)
VGA cable
USB cable
Power cord
Follow these instructions to connect the projector to your computer using
the USB cable (Windows® only), or to your video equipment using an HDMI
cable (EX70 only) or component video cable. For instructions on using
other connection options, see the User’s Guide on your CD-ROM.
Connecting with a USB cable
If you’re connecting a Windows Vista , XP, or 2000 computer to the
®
Projector
remote control
(EX30/EX50)
Password
Protected sticker
Projector
remote control
(EX70)
User’s Guide
CD-ROM
Power button
Batteries
Interface label stickers
(Included for Canada only)
3
4
Canada only: For French speakers, remove sticker(s) from the interface
label backing sheet and place over corresponding text on the control
panel.
2Choose a location
The projector supports 4 viewing setups: front projection, ceiling projection,
rear projection, and rear/ceiling projection. Choose the best one for your
environment. If you install the projector in a rear or overhead position,
you’ll need to choose the correct projection option from the Extended
menu. See the User’s Guide on your CD-ROM for instructions.
The distance between the projector and the screen generally determines the
size of the image, but the size can also vary depending on the aspect ratio
(image shape), how you zoom into the image, and whether you’ve adjusted
other image settings. Depending on the projector model you are using and
the image settings you’ve chosen, you can place the projector anywhere
from 33 to 412 inches (84 to 1047 cm) from the screen.
Use the tables in the User’s Guide or the Image Size calculator on the
Multimedia Projectors page on Epson’s website to help you determine the
proper projection distance.
*411506800*
*411506800*
projector, you can use the USB cable. You don’t need to use the VGA
cable.
Turn on your computer.
ress the
P
power button on the projector or remote control. The
projector beeps, the
power light flashes green, and the projector
warms up. When the
power light stays green, the projector is
ready for use.
4
Connect the square end of the USB cable to the projector’s TypeB
USB port.
Connect the flat end of the cable to any available USB port on your
computer.
Power button
EX70
Turning off the projector
If you’re using a computer, shut it down first, while you can still
see the display.
2
Press the
3
2
3
EX30/EX50
Make sure the projector is turned on.
Turn on your computer or video source.
Power button
1
1
power button on the projector or remote control.
hen you see the confirmation message, press the
W
power button again. The projector beeps twice and the
power light
turns orange.
5
Follow the instructions on your computer screen to install the Epson
USB Display software (you need to install the software only the first
time you connect). After the software has been installed, you see
your computer’s screen displayed by the projector.
NOTE If
you see a “Digital Signature Warning” while installing the
software, select Continue.
You can connect an optional audio cable if you want to play sound through
the projector. See the User’s Guide on your CD-ROM for instructions.
W
ith Epson’s Instant Off® technology, there’s no cool-down period. When
you’re done, just unplug the projector and it’s ready to travel.
Turn over
Connecting with an HDMI cable (EX70 only)
For the best image and sound quality, connect your video equipment
to the HDMI port, if possible.
1
4
To select the best color mode, press the Color Mode button on the
remote control (EX70 only). Press it repeatedly to move through the
options.
Troubleshooting
If you see a blank screen
Connect an HDMI cable (not included) to the HDMI port on your
video player and the HDMI port on the projector.
Color Mode button
(EX70 only)
If you see a blank screen or the No signal message after turning on
your computer or video source, check the following:
 M
ake sure the
power light on the projector is green and not
flashing and the A/V Mute slide (lens cover) is open.
2
Start your video or presentation. Use the Source Search button
on the projector or the Search or Source Search button on the
remote control to select the HDMI source, if necessary.
Connecting with a component video cable
If your video equipment has component video connectors (three
connectors labeled either Y/Cb/Cr or Y/Pb/Pr), you can use a
component-to-VGA cable (not included) to connect the projector. Or,
with the EX30 and EX50, you can use a component video cable (not
included) along with the included component-to-VGA adapter.
Once you’ve connected the cable(s), start your video or presentation.
Use the Source Search button on the projector or the Search or
Source Search button on the remote control to select the video
source, if necessary.
You can connect an optional audio cable if you want to play sound
through the projector. See the User’s Guide on your CD-ROM for
instructions.
6
1
2
3
ee your User’s Guide on the CD-ROM for more information about S
image adjustments.
7Install your User’s Guide
and register your projector
1
Rotate the focus ring to sharpen the image. To reduce or enlarge
the image, rotate the zoom ring (EX50/EX70 only) or press the
Wide (enlarge) or Tele (reduce) button on the projector’s control
panel (EX30 only).
Focus ring
your image looks like
If
or
, first make sure the projector
is facing the screen squarely. Then, if necessary, press the
and
buttons on the projector’s control panel until the image
looks correct.
Insert the projector CD-ROM in your drive. If the installer doesn’t open
automatically, double-click the Epson CD-ROM icon, then double-click
the Epson installer icon.
2
Select English.
3
Follow the instructions on the screen to register.
NOTE You
Adjust the image
Zoom ring
(EX50/EX70 only)
4
o raise the image, press the foot release lever and lift the front
T
of the projector. Release the lever to lock the foot in the position
you want.
You can also select the Color Mode setting from the projector’s Image
menu. See the User’s Guide on your CD-ROM for instructions.
5
can also register at www.epson.com/webreg.
 M
ake sure the cables are connected correctly. (See the User’s Guide
for more information.)
 If you’ve connected more than one video source, you may need to
press the Source Search button on the projector or the Search or
Source Search button on the remote control to select the one you
want to watch. (Allow a few seconds for the projector to sync up
after pressing it.)
If the projector and the notebook don’t display the
same image
If you’re using a Windows notebook:
 H
old down the Fn key and press the function key (such as
or CRT/LCD) that lets you display on an external monitor. On most
systems, the
or CRT/LCD key lets you toggle between the
LCD screen and the projector, or display on both at the same time.
C
heck your monitor settings to make sure both the LCD screen
and the external monitor port are enabled. From the Control
Panel, open the Display utility. Click the Settings tab, then click
Advanced. The method for adjusting the settings varies by brand;
you may need to click a Monitor tab, then make sure the external
Monitor port is set as your primary display and/or enabled. See
your computer’s documentation or online help for details.
If you’re using a Macintosh® notebook with Mac OS® X:
fter you register the projector, click User’s Guide to install it.
A
(If you are using Windows and don’t already have Adobe® Reader®,
click Adobe Reader and follow the on-screen instructions to install it.)
When you’re done, click Exit.
1 From the Apple® menu, select System Preferences, then click
Display or Displays.
2 Select VGA Display or Color LCD, click Arrangement or Arrange,
and make sure Mirror Displays is checked.
To open your User’s Guide, double-click the User’s Guide icon on your
desktop.
Where to get help
Internet support
isit Epson’s support website at epson.com/support and select your
V
product for solutions to common problems. You can download utilities and
documentation, get FAQs and troubleshooting advice, or e-mail Epson with
your questions.
Visit http://www.presentersonline.com to access tips, templates, and
training for developing successful presentations.
Speak to a support representative
o use the Epson PrivateLine® Support service, call (800) 637-7661 and enter
T
the PIN on the Epson PrivateLine Support card that came with your projector.
This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday,
for the duration of your warranty period. You may also speak with a projector
support specialist by dialing one of the following numbers. (Toll or long
distance charges may apply.)
U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday-Friday
Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday-Friday
Days and hours of support are subject to change without notice.
Purchase supplies and accessories
ou can purchase screens and other accessories from an Epson authorized
Y
reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766).
Or you can purchase online at www.epsonstore.com (U.S. sales) or
www.epson.ca (Canadian sales).
Epson and Instant Off are registered trademarks and Epson Exceed Your Vision is a registered
logomark of Seiko Epson Corporation. PrivateLine is a registered trademark of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be
trademarks of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2008 Epson America, Inc. 6/08
Printed in XXXXXX
CPD-25831
Connecting with an HDMI cable (EX70 only)
For the best image and sound quality, connect your video equipment
to the HDMI port, if possible.
1
4
To select the best color mode, press the Color Mode button on the
remote control (EX70 only). Press it repeatedly to move through the
options.
Troubleshooting
If you see a blank screen
Connect an HDMI cable (not included) to the HDMI port on your
video player and the HDMI port on the projector.
Color Mode button
(EX70 only)
If you see a blank screen or the No signal message after turning on
your computer or video source, check the following:
 M
ake sure the
power light on the projector is green and not
flashing and the A/V Mute slide (lens cover) is open.
2
Start your video or presentation. Use the Source Search button
on the projector or the Search or Source Search button on the
remote control to select the HDMI source, if necessary.
Connecting with a component video cable
If your video equipment has component video connectors (three
connectors labeled either Y/Cb/Cr or Y/Pb/Pr), you can use a
component-to-VGA cable (not included) to connect the projector. Or,
with the EX30 and EX50, you can use a component video cable (not
included) along with the included component-to-VGA adapter.
Once you’ve connected the cable(s), start your video or presentation.
Use the Source Search button on the projector or the Search or
Source Search button on the remote control to select the video
source, if necessary.
You can connect an optional audio cable if you want to play sound
through the projector. See the User’s Guide on your CD-ROM for
instructions.
6
1
2
3
ee your User’s Guide on the CD-ROM for more information about S
image adjustments.
7Install your User’s Guide
and register your projector
1
Rotate the focus ring to sharpen the image. To reduce or enlarge
the image, rotate the zoom ring (EX50/EX70 only) or press the
Wide (enlarge) or Tele (reduce) button on the projector’s control
panel (EX30 only).
Focus ring
your image looks like
If
or
, first make sure the projector
is facing the screen squarely. Then, if necessary, press the
and
buttons on the projector’s control panel until the image
looks correct.
Insert the projector CD-ROM in your drive. If the installer doesn’t open
automatically, double-click the Epson CD-ROM icon, then double-click
the Epson installer icon.
2
Select English.
3
Follow the instructions on the screen to register.
NOTE You
Adjust the image
Zoom ring
(EX50/EX70 only)
4
o raise the image, press the foot release lever and lift the front
T
of the projector. Release the lever to lock the foot in the position
you want.
You can also select the Color Mode setting from the projector’s Image
menu. See the User’s Guide on your CD-ROM for instructions.
5
can also register at www.epson.com/webreg.
 M
ake sure the cables are connected correctly. (See the User’s Guide
for more information.)
 If you’ve connected more than one video source, you may need to
press the Source Search button on the projector or the Search or
Source Search button on the remote control to select the one you
want to watch. (Allow a few seconds for the projector to sync up
after pressing it.)
If the projector and the notebook don’t display the
same image
If you’re using a Windows notebook:
 H
old down the Fn key and press the function key (such as
or CRT/LCD) that lets you display on an external monitor. On most
systems, the
or CRT/LCD key lets you toggle between the
LCD screen and the projector, or display on both at the same time.
C
heck your monitor settings to make sure both the LCD screen
and the external monitor port are enabled. From the Control
Panel, open the Display utility. Click the Settings tab, then click
Advanced. The method for adjusting the settings varies by brand;
you may need to click a Monitor tab, then make sure the external
Monitor port is set as your primary display and/or enabled. See
your computer’s documentation or online help for details.
If you’re using a Macintosh® notebook with Mac OS® X:
fter you register the projector, click User’s Guide to install it.
A
(If you are using Windows and don’t already have Adobe® Reader®,
click Adobe Reader and follow the on-screen instructions to install it.)
When you’re done, click Exit.
1 From the Apple® menu, select System Preferences, then click
Display or Displays.
2 Select VGA Display or Color LCD, click Arrangement or Arrange,
and make sure Mirror Displays is checked.
To open your User’s Guide, double-click the User’s Guide icon on your
desktop.
Where to get help
Internet support
isit Epson’s support website at epson.com/support and select your
V
product for solutions to common problems. You can download utilities and
documentation, get FAQs and troubleshooting advice, or e-mail Epson with
your questions.
Visit http://www.presentersonline.com to access tips, templates, and
training for developing successful presentations.
Speak to a support representative
o use the Epson PrivateLine® Support service, call (800) 637-7661 and enter
T
the PIN on the Epson PrivateLine Support card that came with your projector.
This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday,
for the duration of your warranty period. You may also speak with a projector
support specialist by dialing one of the following numbers. (Toll or long
distance charges may apply.)
U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday-Friday
Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday-Friday
Days and hours of support are subject to change without notice.
Purchase supplies and accessories
ou can purchase screens and other accessories from an Epson authorized
Y
reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766).
Or you can purchase online at www.epsonstore.com (U.S. sales) or
www.epson.ca (Canadian sales).
Epson and Instant Off are registered trademarks and Epson Exceed Your Vision is a registered
logomark of Seiko Epson Corporation. PrivateLine is a registered trademark of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be
trademarks of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2008 Epson America, Inc. 6/08
Printed in XXXXXX
CPD-25831
Connecting with an HDMI cable (EX70 only)
For the best image and sound quality, connect your video equipment
to the HDMI port, if possible.
1
4
To select the best color mode, press the Color Mode button on the
remote control (EX70 only). Press it repeatedly to move through the
options.
Troubleshooting
If you see a blank screen
Connect an HDMI cable (not included) to the HDMI port on your
video player and the HDMI port on the projector.
Color Mode button
(EX70 only)
If you see a blank screen or the No signal message after turning on
your computer or video source, check the following:
 M
ake sure the
power light on the projector is green and not
flashing and the A/V Mute slide (lens cover) is open.
2
Start your video or presentation. Use the Source Search button
on the projector or the Search or Source Search button on the
remote control to select the HDMI source, if necessary.
Connecting with a component video cable
If your video equipment has component video connectors (three
connectors labeled either Y/Cb/Cr or Y/Pb/Pr), you can use a
component-to-VGA cable (not included) to connect the projector. Or,
with the EX30 and EX50, you can use a component video cable (not
included) along with the included component-to-VGA adapter.
Once you’ve connected the cable(s), start your video or presentation.
Use the Source Search button on the projector or the Search or
Source Search button on the remote control to select the video
source, if necessary.
You can connect an optional audio cable if you want to play sound
through the projector. See the User’s Guide on your CD-ROM for
instructions.
6
1
2
3
ee your User’s Guide on the CD-ROM for more information about S
image adjustments.
7Install your User’s Guide
and register your projector
1
Rotate the focus ring to sharpen the image. To reduce or enlarge
the image, rotate the zoom ring (EX50/EX70 only) or press the
Wide (enlarge) or Tele (reduce) button on the projector’s control
panel (EX30 only).
Focus ring
your image looks like
If
or
, first make sure the projector
is facing the screen squarely. Then, if necessary, press the
and
buttons on the projector’s control panel until the image
looks correct.
Insert the projector CD-ROM in your drive. If the installer doesn’t open
automatically, double-click the Epson CD-ROM icon, then double-click
the Epson installer icon.
2
Select English.
3
Follow the instructions on the screen to register.
NOTE You
Adjust the image
Zoom ring
(EX50/EX70 only)
4
o raise the image, press the foot release lever and lift the front
T
of the projector. Release the lever to lock the foot in the position
you want.
You can also select the Color Mode setting from the projector’s Image
menu. See the User’s Guide on your CD-ROM for instructions.
5
can also register at www.epson.com/webreg.
 M
ake sure the cables are connected correctly. (See the User’s Guide
for more information.)
 If you’ve connected more than one video source, you may need to
press the Source Search button on the projector or the Search or
Source Search button on the remote control to select the one you
want to watch. (Allow a few seconds for the projector to sync up
after pressing it.)
If the projector and the notebook don’t display the
same image
If you’re using a Windows notebook:
 H
old down the Fn key and press the function key (such as
or CRT/LCD) that lets you display on an external monitor. On most
systems, the
or CRT/LCD key lets you toggle between the
LCD screen and the projector, or display on both at the same time.
C
heck your monitor settings to make sure both the LCD screen
and the external monitor port are enabled. From the Control
Panel, open the Display utility. Click the Settings tab, then click
Advanced. The method for adjusting the settings varies by brand;
you may need to click a Monitor tab, then make sure the external
Monitor port is set as your primary display and/or enabled. See
your computer’s documentation or online help for details.
If you’re using a Macintosh® notebook with Mac OS® X:
fter you register the projector, click User’s Guide to install it.
A
(If you are using Windows and don’t already have Adobe® Reader®,
click Adobe Reader and follow the on-screen instructions to install it.)
When you’re done, click Exit.
1 From the Apple® menu, select System Preferences, then click
Display or Displays.
2 Select VGA Display or Color LCD, click Arrangement or Arrange,
and make sure Mirror Displays is checked.
To open your User’s Guide, double-click the User’s Guide icon on your
desktop.
Where to get help
Internet support
isit Epson’s support website at epson.com/support and select your
V
product for solutions to common problems. You can download utilities and
documentation, get FAQs and troubleshooting advice, or e-mail Epson with
your questions.
Visit http://www.presentersonline.com to access tips, templates, and
training for developing successful presentations.
Speak to a support representative
o use the Epson PrivateLine® Support service, call (800) 637-7661 and enter
T
the PIN on the Epson PrivateLine Support card that came with your projector.
This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday,
for the duration of your warranty period. You may also speak with a projector
support specialist by dialing one of the following numbers. (Toll or long
distance charges may apply.)
U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday-Friday
Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday-Friday
Days and hours of support are subject to change without notice.
Purchase supplies and accessories
ou can purchase screens and other accessories from an Epson authorized
Y
reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766).
Or you can purchase online at www.epsonstore.com (U.S. sales) or
www.epson.ca (Canadian sales).
Epson and Instant Off are registered trademarks and Epson Exceed Your Vision is a registered
logomark of Seiko Epson Corporation. PrivateLine is a registered trademark of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be
trademarks of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2008 Epson America, Inc. 6/08
Printed in XXXXXX
CPD-25831
Download PDF