Acer | X1230K | User`s guide | Acer X1235 Series User`s guide

Acer Projector
X1130/X1230/X1230K/
X1230S/X1235 Series
User's Guide
Copyright © 2009. Acer Incorporated.
All Rights Reserved.
Acer Projector X1130/X1230/X1230K/X1230S/X1235 Series User's Guide
Original Issue: 1/2009
Changes may be made periodically to the information in this publication without obligation
to notify any person of such revisions or changes. Such changes will be incorporated in new
editions of this manual or supplementary documents and publications. This company makes
no representations or warranties, either expressed or implied, with respect to the contents
hereof and specifically disclaims the implied warranties of merchantability or fitness for a
particular purpose.
Record the model number, serial number, purchase date and place of purchase information in
the space provided below. The serial number and model number are recorded on the label
affixed to your projector. All correspondence concerning your unit should include the serial
number, model number and purchase information.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in
any form or by any means, electronically, mechanically, by photocopy, recording or otherwise,
without the prior written permission of Acer Incorporated.
Acer Projector X1130/X1230/X1230K/X1230S/X1235 Series
Model number: __________________________________
Serial number: ___________________________________
Date of purchase: ________________________________
Place of purchase: ________________________________
Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies'
product names or trademarks are used herein for identification purposes only and belong to
their respective companies.
"HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC."
iii
Information for Your Safety and
Comfort
Read these instructions carefully. Keep this document for future reference.
Follow all warnings and instructions marked on the product.
Turning the product off before cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Caution for plug as disconnecting device
Observe the following guidelines when connecting and disconnecting power to
the external power supply unit:
•
•
•
Install the power supply unit before connecting the power cord to the AC
power outlet.
Unplug the power cord before removing the power supply unit from the
projector.
If the system has multiple sources of power, disconnect power from the
system by unplugging all power cords from the power supplies.
Caution for Accessibility
Be sure that the power outlet you plug the power cord into is easily accessible
and located as close to the equipment operator as possible. When you need to
disconnect power to the equipment, be sure to unplug the power cord from the
electrical outlet.
Warnings!
•
•
•
Do not use this product near water.
Do not place this product on an unstable cart, stand or table. If the product
falls, it could be seriously damaged.
Slots and openings are provided for ventilation to ensure reliable
operation of the product and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug or other similar surface.
This product should never be placed near or over a radiator or heat register, or
in a built-in installation unless proper ventilation is provided.
•
Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any kind onto or into
the product.
iv
•
•
To avoid damage of internal components and to prevent battery leakage,
do not place the product on a vibrating surface.
Never use it under sporting, exercising, or any vibrating environment
which will probably cause unexpected short current or damage rotor
devices, lamp.
Using electrical power
•
•
•
•
•
This product should be operated from the type of power indicated on the
marking label. If you are not sure of the type of power available, consult
your dealer or local power company.
Do not allow anything to rest on the power cord. Do not locate this
product where people will walk on the cord.
If an extension cord is used with this product, make sure that the total
ampere rating of the equipment plugged into the extension cord does not
exceed the extension cord ampere rating. Also, make sure that the total
rating of all products plugged into the wall outlet does not exceed the fuse
rating.
Do not overload a power outlet, strip or receptacle by plugging in too
many devices. The overall system load must not exceed 80% of the branch
circuit rating. If power strips are used, the load should not exceed 80% of
the power strip's input rating.
This product's AC adapter is equipped with a three-wire grounded plug.
The plug only fits in a grounded power outlet. Make sure the power outlet
is properly grounded before inserting the AC adapter plug. Do not insert
the plug into a non-grounded power outlet. Contact your electrician for
details.
Warning! The grounding pin is a safety feature. Using a power outlet that is
not properly grounded may result in electric shock and/or injury.
Note: The grounding pin also provides good protection from unexpected
noise produced by other nearby electrical devices that may interfere with
the performance of this product.
•
Use the product only with the supplied power supply cord set. If you need
to replace the power cord set, make sure that the new power cord meets
the following requirements: detachable type, UL listed/CSA certified, type
SPT-2, rated 7A 125V minimum, VDE approved or its equivalent, 4.6 meters
(15 feet) maximum length.
v
Product servicing
Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage points or other risks. Refer all servicing to
qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service
personnel when:
•
•
•
•
•
•
the power cord or plug is damaged, cut or frayed
liquid was spilled into the product
the product was exposed to rain or water
the product has been dropped or the case has been damaged
the product exhibits a distinct change in performance, indicating a need
for service
the product does not operate normally after following the operating
instructions
Note: Adjust only those controls that are covered by the operating
instructions, since improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to normal condition.
Warning! For safety reasons, do not use non-compliant parts when adding
or changing components. Consult your reseller for purchase options.
Your device and its enhancements may contain small parts. Keep them out of
the reach of small children.
Additional safety information
•
•
•
Do not look into the projector's lens when the lamp is on. The bright light
may hurt your eyes.
Turn on the projector first and then signal sources
Do not place the product in following environments:
•
•
Space that is poorly ventilated or confined. At least 50cm clearance from walls
and free flow of air around the projector is necessary.
Locations where temperatures may become excessively high, such as inside of a
car with all windows rolled up.
Locations where excessive humidity, dust, or cigarette smoke may contaminate
optical components, shortening the life span and darkening the image.
Locations near fire alarms.
•
•
Locations with an ambient temperature above 40 ºC/104 ºF.
Locations where the altitudes are higher than 10000 feet.
•
•
•
Unplug immediately if there is something wrong with your projector. Do
not operate if smoke, strange noise or odor comes out of your projector. It
vi
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
might cause fire or electric shock. In this case, unplug immediately and
contact your dealer.
Do not keep using this product to break or drop it. In this case contact your
dealer for inspection.
Do not face the projector lens to the sun. It can lead to fire.
When switching the projector off, please ensure the projector completes
its cooling cycle before disconnecting power.
Do not turn off the main power abruptly or unplug the projector during
operation. It can lead to lamp breakage, fire, electric shock or other
trouble. The best way is to wait for the fan to turn off before turning main
power off.
Do not touch air outlet grille and bottom plate which becomes hot.
Clean the air filter frequently. The temperature inside may rise and cause
damage when the filter/ventilation slots clogged with dirt or dust.
Do not look into the air outlet grille when projector is operating. It may
hurt your eyes.
Always open the lens shutter or remove the lens cap when the projector is
on.
Do not block the projector lens with any object when the projector is
under operation as this could cause the object to become heated and
deformed or even cause a fire. To temporarily turn off the lamp, press HIDE
on the remote control.
The lamp becomes extremely hot during operation. Allow the projector to
cool for approximately 45 minutes prior to removing the lamp assembly for
replacement.
Do not operate lamps beyond the rated lamp life. It could cause it to break
on rare occasions.
Never replace the lamp assembly or any electronic components unless the
projector is unplugged.
The product will detect the life of the lamp itself. Please be sure to change
the lamp when warning messages display.
When changing the lamp, please allow unit to cool down, and follow all
changing instructions.
Reset the "Lamp Hour Reset" function from the Onscreen Display
"Management" menu after replacing the lamp module.
Do not attempt to disassemble this projector. There are dangerous high
voltages inside which may hurt you. The only user serviceable part is the
lamp which has its own removable cover. Refer servicing only to suitable
qualified professional service personnel.
Do not stand the projector on end vertically. It may cause the projector to
fall over, causing injury or damage.
This product is capable of displaying inverted images for ceiling mount
installation. Only use acer ceiling mount kit for mounting the projector
and ensure it is securely installed.
vii
Operating environment for using wireless function
(Optional)
Warning! For safety reasons, turn off all wireless or radio transmitting
devices when using your machine under the following conditions. These
devices may include, but are not limited to: wireless LAN (WLAN), Bluetooth
and/or 3G.
Remember to follow any special regulations in force in any area, and always
switch off your device when its use is prohibited or when it may cause
interference or danger. Use the device only in its normal operating positions.
This device meets RF exposure guidelines when used normally, and it and its
antenna are positioned at least 1.5 centimeters (5/8 inches) away from your
body. It should not contain metal and you should position the device the abovestated distance from your body.
To successfully transmit data files or messages, this device requires a good
quality connection to the network. In some cases, transmission of data files or
messages may be delayed until such a connection is available.
Ensure that the above separation distance instructions are followed until the
transmission is completed.
Parts of the device are magnetic. Metallic materials may be attracted to the
device, and persons with hearing aids should not hold the device to the ear with
the hearing aid. Do not place credit cards or other magnetic storage media near
the device, because information stored on them may be erased.
Medical devices
Operation of any radio transmitting equipment, including wireless phones, may
interfere with the functionality of inadequately protected medical devices.
Consult a physician or the manufacturer of the medical device to determine if
they are adequately shielded from external RF energy or if you have any
questions. Switch off your device in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to external RF transmissions.
Pacemakers. Pacemaker manufacturers recommend that a minimum separation
of 15.3 centimeters (6 inches) be maintained between wireless devices and a
pacemaker to avoid potential interference with the pacemaker. These
recommendations are consistent with the independent research by and
recommendations of Wireless Technology Research. Persons with pacemakers
should do the following:
•
•
Always keep the device more than 15.3 centimeters (6 inches) from the
pacemaker.
Not carry the device near your pacemaker when the device is switched on.
If you suspect interference, switch off your device, and move it.
viii
Hearing aids. Some digital wireless devices may interfere with some hearing
aids. If interference occurs, consult your service provider.
Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles such as electronic fuel injection systems, electronic
antiskid (antilock) braking systems, electronic speed control systems, and air bag
systems. For more information, check with the manufacturer, or its
representative, of your vehicle or any equipment that has been added. Only
qualified personnel should service the device, or install the device in a vehicle.
Faulty installation or service may be dangerous and may invalidate any
warranty that may apply to the device. Check regularly that all wireless
equipment in your vehicle is mounted and operating properly. Do not store or
carry flammable liquids, gases, or explosive materials in the same compartment
as the device, its parts, or enhancements. For vehicles equipped with an air bag,
remember that air bags inflate with great force. Do not place objects, including
installed or portable wireless equipment in the area over the air bag or in the
air bag deployment area. If in-vehicle wireless equipment is improperly
installed, and the air bag inflates, serious injury could result.
Using your device while flying in aircraft is prohibited. Switch off your device
before boarding an aircraft. The use of wireless teledevices in an aircraft may be
dangerous to the operation of the aircraft, disrupt the wireless telephone
network, and may be illegal.
Potentially explosive environments
Switch off your device when in any area with a potentially explosive
atmosphere and obey all signs and instructions. Potentially explosive
atmospheres include areas where you would normally be advised to turn off
your vehicle engine. Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death. Switch off the device at refueling points
such as near gas pumps at service stations. Observe restrictions on the use of
radio equipment in fuel depots, storage, and distribution areas; chemical plants;
or where blasting operations are in progress. Areas with a potentially explosive
atmosphere are often, but not always, clearly marked. They include below deck
on boats, chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), and areas where the air contains
chemicals or particles such as grain, dust or metal powders.
Caution for Listening
To protect your hearing, follow these instructions.
•
•
•
•
•
Increase the volume gradually until you can hear clearly and comfortably.
Do not increase the volume level after your ears have adjusted.
Do not listen to music at high volumes for extended periods.
Do not increase the volume to block out noisy surroundings.
Decrease the volume if you can't hear people speaking near you.
ix
Disposal instructions
Do not throw this electronic device into the trash when discarding. To minimize
pollution and ensure utmost protection of the global environment, please
recycle. For more information on the Waste from Electrical and Electronics
Equipment (WEEE) regulations, visit http://www.acer-group.com/public/
Sustainability/sustainability01.htm
Mercury advisory
For projectors or electronic products containing an LCD/CRT monitor or display:
"Lamp(s) contain Mercury,
Dispose Properly."
Lamp(s) inside this product contain mercury and must be recycled or disposed of
according to local, state or federal laws. For more information, contact the
Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal
information, check www.lamprecycle.org
x
First Thing First
Usage Notes
Do:
•
Turn off the product before cleaning.
•
Use a soft cloth moistened with mild detergent to clean the display
housing.
•
Disconnect the power plug from AC outlet if the product is not being used
for a long period of time.
Don't:
•
Block the slots and openings on the unit provided for ventilation.
•
Use abrasive cleaners, waxes or solvents to clean the unit.
•
Use under the following conditions:
•
•
•
•
In extremely hot, cold or humid environments.
In areas susceptible to excessive dust and dirt.
Near any appliance that generates a strong magnetic field.
Place in direct sunlight.
Precautions
Follow all warnings, precautions and maintenance as recommended in this
user's guide to maximize the life of your unit.
Warning:
•
•
Do not look into the projector's lens when the lamp is on. The bright light may hurt
your eyes.
To reduce the risk of fire or electric shock, do not expose this product to rain or
moisture.
•
•
Please do not open or disassemble the product as this may cause electric shock.
•
This product will detect the life of the lamp itself. Please be sure to change the lamp
when it shows warning messages.
•
Reset the "Lamp Hour Reset" function from the Onscreen Display "Management"
menu after replacing the lamp module.
•
When switching the projector off, please ensure the projector completes its cooling
cycle before disconnecting power.
•
•
•
Turn on the projector first and then the signal sources.
When changing the lamp, please allow unit to cool down, and follow all changing
instructions.
Do not use lens cap when projector is in operation.
When the lamp reaches the end of its life, it will burn out and may make a loud
popping sound. If this happens, the projector will not turn back on until the lamp
module has been replaced. To replace the lamp, follow the procedures listed under
"Replacing the Lamp".
First Thing First
iii
x
Usage Notes
x
Precautions
x
Introduction
1
Product Features
1
Package Overview
2
Projector Overview
3
Projector Outlook
3
Control Panel
4
Remote Control Layout
5
Getting Started
Connecting the Projector
Turning the Projector On/Off
7
7
8
Turning On the Projector
8
Turning Off the Projector
9
Adjusting the Projected Image
10
Adjusting the Height of Projected Image
10
How to Optimize Image Size and Distance
11
How to Get a Preferred Image Size by Adjusting
Distance and Zoom
13
User Controls
15
Installation Menu
15
Acer Empowering Technology
16
Onscreen Display (OSD) Menus
17
Color
18
Image
19
Setting
21
Management
23
Audio
24
Timer
25
Language
25
Contents
Information for Your Safety and Comfort
Appendices
26
Troubleshooting
26
LED & Alarm Definition Listing
30
Replacing the Lamp
31
Ceiling Mount Installation
32
Specifications
35
Compatibility Modes
37
Regulations and safety notices
40
1
Product Features
This product is single-chip DLP® projector. Outstanding features include:
•
DLP® technology
•
X1130: Native 800 x 600 SVGA resolution
X1230/X1230K/X1230S/X1235: Native 1024 x 768 XGA resolution
4:3 / 16:9 aspect ratio supported
•
Acer ColorBoost technology delivers nature's true colors for vivid, life-like
images
•
High brightness and contrast ratio
•
Versatile display modes (Bright, Standard, Video, Blackboard, User 1, User
2) enable optimum performance in any situation
•
NTSC/PAL/SECAM compatible with HDTV (720p, 1080i) support
•
Lower power consumption and economy (ECO) mode extends lamp life
•
Acer EcoProjeciton Technology delivers Intelligent power management
approach and physical efficiency improvement
•
Empowering Key reveals Acer Empowering Technology utilities (Acer
eView, eTimer, ePower Management) for easy adjustment of settings
•
Advanced keystone correction delivers optimum presentations
•
Multi-language Onscreen Display (OSD) menus
•
Full-function remote control
•
X1130/X1230/X1230K/X1235: Manual focus projection lens zooms up to
1.1X
•
2X digital zoom and pan move function
•
Microsoft® Windows® 2000, XP, Vista® OS compliant
English
Introduction
English
2
Package Overview
This projector comes with all the items shown below. Check to make sure your
unit is complete. Contact your dealer immediately if any thing is missing.
Projector with lens cap
Power cord
VGA cable
Composite video cable
Security card
User’s guide (CD-ROM)
Acer Projector
1
2
3
4
5
6
7
8
9
0
Quick Start Guide
Remote control
Carrying case
Quick start guide
Battery x 2
3
English
Projector Overview
Projector Outlook
Front / upper side
5
1
6
7
2
8
3
4
#
Description
#
Description
1
Power key and Power indicator
LED
5
Control panel
2
Projection lens
6
Zoom ring
3
Elevator button
7
Focus ring
4
Lens cap
8
Remote control receiver
Rear side
(X1130)
(X1230/X1230K/X1230S/X1235)
1
2
3
4 5
6
8
#
7
9
1
10
Description
3
4 5
8
#
9
Description
1
RS232 connector
6
Audio input connector
2
Monitor loop-through output
connector
7
Audio output connector
3
PC analog signal/HDTV/
8
component video input connector
Power socket
4
Composite video input connector
9
Kensington™ lock port
5
S-Video input connector
10 Tilt adjusting wheel
10
English
4
Control Panel
1
2
7
LAMP
TEMP
IR
3
8
4
9
5
6
10
3
#
Function
Description
1
LAMP
2
IR
Remote control receiver
3
Keystone
Adjusts image distortion caused by tilting
projection (±40 degrees).
4
Power key and Power
indicator LED
Refer to the "Turning the Projector On/
Off" section.
5
MENU
•
Launches the Onscreen Display (OSD)
menu, returns to the previous step for
the OSD menu operation or exits the
OSD menu.
•
Confirms your selection of items.
6
RESYNC
Automatically synchronizes the projector
to the input source.
7
TEMP
Temp Indicator LED
8
Empowering key
Enables unique Acer functions: eView,
eTimer, ePower Management.
9
Four directional select keys
Selects items or makes adjustments to your
selection.
10 SOURCE
Lamp Indicator LED
Chooses RGB, component video, S-Video,
composite video or HDTV source.
5
#
Function
English
Remote Control Layout
1
2
3
4
5
6
7
8
9
0
Description
1
Power
2
ASPECT RATIO
To choose the desired aspect ratio (Auto/4:3/16:9).
3
ZOOM
Zooms the projector display in or out.
4
RESYNC
Automatically synchronizes the projector to the input
source.
5
Refer to the "Turning the Projector On/Off" section.
Keystone
Four
directional
select keys
Adjusts image distortion caused by tilting projection
(±40 degrees).
Selects items or makes adjustments to your selection.
6
Keypad 0~9
Press "0~9" to input a password in the "Setting >
Security" OSD.
7
VGA
To change source to VGA. This connection supports
analog RGB, YPbPr (480p/576p/720p/1080i), and
YCbCr (480i/576i).
8
COMPONENT
To change source to Component video. This
connection supports YPbPr (480p/576p/720p/1080i)
and YCbCr (480i/576i).
9
S-VIDEO
To change source to S-Video.
English
6
#
Function
Description
10 HDMITM
To change source to HDMITM (for the model with
11 Infrared
transmitter
Sends signals to the projector.
12 Empowering key
Enables unique Acer functions: eView, eTimer,
ePower Management.
13 FREEZE
To pause the screen image.
14 HIDE
Momentarily turns off the video. Press "HIDE" to hide
screen image; press again to display the image.
15 SOURCE
Chooses RGB, component video, S-Video, composite
video or HDTV source.
16 MENU
•
Launches the Onscreen Display (OSD) menu,
returns to the previous step for the OSD menu
operation or exits the OSD menu.
•
Confirms your selection of items.
17 VOL UP/VOL DN
Increases/decreases the volume.
18 VIDEO
To change source to Composite video.
19 MUTE
To turn on/off the volume.
20 WIRELESS
Displays the image which is wirelessly transmitted
from the PC to the projector via the "Acer eProjection
Management" utility. (for wireless model)
HDMITM connector).
7
English
Getting Started
Connecting the Projector
DVD player,
Set-top box,
HDTV receiver
VGA
Display
D-Sub
Speakers
3
5
D-Sub
2
W R
R B G
5
2
HDTV adapter
D-Sub
D-Sub
1
RS232
RS232
Y
7
Video Output
Y
6
4
S-Video Output
5
W R
#
Description
#
5
Description
1
Power cord
Audio cable
2
VGA cable
6
S-Video cable
3
VGA to component video/HDTV
adapter
7
RS232 cable
4
Composite video cable
Note: To ensure the projector works well with your computer,
please make sure the timing of the display mode is compatible
with the projector.
English
8
Turning the Projector On/Off
Turning On the Projector
1
Remove the lens cap.
2
Ensure that the power cord and signal cable are securely connected.
The Power LED will flash red.
3
Turn on the projector by pressing
(POWER) on the control panel or
remote control, and the Power indicator LED will turn blue.
4
Turn on your source (computer, notebook, video player, etc.). The
projector will detect your source automatically.
•
If the screen displays "Lock" & "Source" icons, it means the projector
is locked onto a specific source type and there is no such type of input
signal detected.
•
If the screen displays "No Signal", please make sure the signal cables
are securely connected.
•
If you connect to multiple sources at the same time, use "SOURCE" on
the control panel or remote control, or the direct source key on the
remote control to switch between inputs.
2&3
1
Lens cap
LAMP
IR
TEMP
9
1
To turn off the projector, press
(POWER) twice. The message below
will display onscreen for 10 seconds.
"Please press power button again to complete the shutdown process."
2
Immediately after powering off, the Power indicator LED will flash
RED rapidly and the fan(s) will continue to operate for about 120
seconds. This is to ensure that the system cools correctly.
3
Once the system has finished cooling, the Power indicator LED will
turn solid RED which means the projector enters a standby mode.
4
It is now safe to unplug the power cord.
Warning: Do not turn on the projector immediately after
powering off.
Note: If you wish to turn the projector back on, you must wait for
60 seconds at least to press the "Power" button to restart the
projector.
Warning indicators:
•
If the projector automatically shuts down and the LAMP indicator
turns solid RED, please contact your local reseller or service center.
•
If the projector automatically shuts down and the TEMP indicator
turns solid RED, this indicates that the projector has overheated. The
message below will display onscreen if this is about to happen:
"Projector Overheated. Lamp will automatically turn off soon."
•
If the TEMP indicator flashes RED and the message below is displayed
onscreen, please contact your local dealer or service center:
"Fan fail. Lamp will automatically turn off soon."
English
Turning Off the Projector
English
10
Adjusting the Projected Image
Adjusting the Height of Projected Image
The projector is equipped with an elevator foot for adjusting the image height.
To raise the image:
1
Press the elevator button.
2
Raise the image to the desired height angle, then release the button
to lock the elevator foot into position.
3
Use Tilt adjusting wheel to fine-tune the display angle.
To lower the image:
1
Press the elevator button.
2
Lower the image to the desired height angle, then release the button
to lock the elevator foot into position.
3
Use Tilt adjusting wheel to fine-tune the display angle.
1
Elevator
button
3
Tilt adjusting wheel
2
Elevator foot
11
Consult the table below to find the optimal image sizes achievable when the
projector is positioned at a desired distance from the screen.
X1130/X1230/X1230K/X1235
If the projector is 3 m from the screen, good image quality is possible for image
sizes between 72" and 79".
•
Note: Remind as below figure, the space of 129 cm height is
required when located at 3 m distance.
Max
scre
Min
en s
iz
scre
e
en s
iz
79"
e
72"
Height:
118 cm
Height:
129 cm
From
base to
top of
image
3m
Desired distance
Minimum Screen Size (Min zoom)
Maximum Screen Size (Max zoom)
Desired
From base to
From base to
Distance Diagonal
Diagonal
top of image
top of image
(m)
(inch) W (cm) x H (cm)
(inch) W (cm) x H (cm)
(cm)
(cm)
<A>
<B>
<B>
<C>
<C>
1.5
36
75 x 55
59
40
81 x 60
66
2
48
98 x 74
79
53
108 x 81
87
2.5
60
123 x 92
98
66
134 x 101
108
3
72
147 x 110
118
79
161 x 121
129
3.5
84
172 x 129
138
93
188 x 141
152
4
96
196 x 147
157
106
215 x 161
174
4.5
108
221 x 165
177
119
242 x 181
195
5
120
245 x 184
197
132
269 x 202
216
6
144
294 x 221
236
159
323 x 242
260
7
168
343 x 257
275
185
376 x 282
303
8
192
392 x 294
315
212
430 x 323
347
9
216
441 x 331
354
238
484 x 363
390
10
241
490 x 368
395
265
538 x 403
434
11
265
539 x 404
434
291
591 x 444
477
12
289
588 x 441
473
318
645 x 484
521
Zoom Ratio: 1.1 x
English
How to Optimize Image Size and Distance
English
12
X1230S
If the projector is 3 m from the screen, good image quality is possible for image
sizes around 164".
•
Note: Remind as below figure, the space of 275 cm height is
required when located at 3 m distance.
164"
Height:
275 cm
From
base to
top of
image
3m
Desired distance
Minimum Screen Size (Min zoom)
Desired
From base to
Distance Diagonal
top of image
(m)
(inch) W (cm) x H (cm)
(cm)
<A>
<B>
<C>
0.5
27
56 x 42
46
1
55
111 x 83
92
1.5
82
167 x 125
138
2
109
222 x 167
183
2.5
137
278 x 208
229
3
164
333 x 250
275
3.5
191
389 x 292
321
4
219
444 x 333
367
4.5
246
500 x 375
413
5
273
556 x 417
458
6
328
667 x 500
550
Zoom Ratio: 1.0 x
13
The table below shows how to achieve a desired image size by adjusting either
the position or the zoom ring.
X1130/X1230/X1230K/X1235
To obtain an image size of 50" set the projector at a distance 1.9 m and 2.1 m
from the screen and adjust the zoom level accordingly.
•
50"
Desired
image size
Height:
82 cm
From base
to top of
image
2.1 m
1.9 m
Desired Image Size
Desired distance
Distance (m)
Top (cm)
Max zoom
<B>
Min zoom
<C>
From base to top of
image < D >
1.2
49
81 x 61
1.5
1.7
66
102 x 76
1.9
2.1
82
60
122 x 91
2.3
2.5
98
70
142 x 107
2.6
2.9
115
80
163 x 122
3.0
3.3
131
90
183 x 137
3.4
3.7
147
100
203 x 152
3.8
4.2
164
120
244 x 183
4.5
5.0
197
150
305 x 229
5.7
6.2
246
180
366 x 274
6.8
7.5
295
200
406 x 305
7.6
8.3
328
250
508 x 381
9.4
10.4
410
300
610 x 457
11.3
Diagonal (inch)
<A>
W (cm) x H (cm)
30
61 x 46
40
50
Zoom Ratio: 1.1 x
491
English
How to Get a Preferred Image Size by Adjusting
Distance and Zoom
English
14
X1230S
To obtain an image size of 50" set the projector at a distance 0.9 m from the
screen.
•
50"
Desired
image size
Height:
84 cm
From
base to
top of
image
0.9 m
Desired distance
Desired Image Size
Diagonal (inch)
<A>
Distance (m)
Top (cm)
W (cm) x H (cm)
Max zoom
<B>
Min zoom
<C>
From base to top of
image < D >
30
61 x 46
0.5
0.5
50
40
81 x 61
0.7
0.7
67
50
102 x 76
0.9
0.9
84
60
122 x 91
1.1
1.1
101
70
142 x 107
1.3
1.3
117
80
163 x 122
1.5
1.5
134
90
183 x 137
1.6
1.6
151
100
203 x 152
1.8
1.8
168
120
244 x 183
2.2
2.2
201
150
305 x 229
2.7
2.7
251
180
366 x 274
3.3
3.3
302
200
406 x 305
3.7
3.7
335
250
508 x 381
4.6
4.6
419
300
610 x 457
5.5
5.5
503
Zoom Ratio: 1.0 x
15
English
User Controls
Installation Menu
The installation menu provides an onscreen display (OSD) for projector
installation and maintenance. Use the OSD only when the message "No
signal input" is displayed on the screen.
1
Turn on the projector by pressing
remote control.
2
Press "MENU" on the control panel or remote control to launch the
OSD for projector installation and maintenance.
3
The background pattern acts as a guide to adjusting the calibration
and alignment settings, such as screen size and distance, focus and
more.
4
(POWER) on the control panel or
The Installation menu includes the following options:
•
Projection method
•
Menu location
•
Keystone settings
•
Language settings
•
Reset to factory default function
Use the up and down arrow keys to select an option, the left and right arrow keys to
adjust selected option settings, and the right arrow key to enter a submenu for
feature setting. The new settings will be saved automatically upon exiting the menu.
5
Push "MENU" anytime to exit the menu and return to the Acer
welcome screen.
English
16
Acer Empowering Technology
Empowering
Key
Acer Empowering Key provides three
Acer unique functions: "Acer eView
Management", "Acer eTimer
Management", and "Acer ePower
Management". Press " " for more
than one second to launch the
Onscreen Display main menu to modify
its function.
Acer eView Management
Press " " to launch "Acer eView
Management".
"Acer eView Management" is for
display mode selection. Please refer to
the "Onscreen Display (OSD) Menus"
section for more details.
Acer eTimer Management
Press " " to launch "Acer eTimer
Management".
"Acer eTimer Management" provides
the reminding function for
presentation time control. Please refer
to the "Onscreen Display (OSD) Menus"
section for more details.
Acer ePower Management
Press " " to launch "Acer ePower
Management".
"Acer ePower Management"provides
you one shortcut to save the lamp and
projector’s life. Please refer to the
"Onscreen Display (OSD) Menus"
section for more details.
17
The projector has multilingual Onscreen Display (OSD) menus that allow
you to make image adjustments and change a variety of settings.
Using the OSD menus
•
To open the OSD menu, press "MENU" on the control panel or remote
control.
•
When the OSD is displayed, use
to select an item in the main menu.
After selecting the desired main menu item, press
for feature setting.
•
Use
to enter a submenu
to select the desired item and adjust the settings by using
.
•
Select the next item to be adjusted in the submenu and adjust as described
above.
•
Press "MENU" on the control panel or remote control, the screen will
return to the main menu.
•
To exit the OSD menu, press "MENU" on the control panel or remote
control again. It will close and the projector will automatically save the
new settings.
Main menu
Setting
Submenu
English
Onscreen Display (OSD) Menus
English
18
Color
There are many factory presets optimized for various types
of images.
Display Mode
•
Bright: For brightness optimization.
•
Standard: For common environment.
•
Video: For playing video in a bright environment.
•
Blackboard: Blackboard mode can improve displayed
color when you project onto darker surfaces.
•
User 1: Memorize user’s settings.
•
User 2: Memorize user’s settings.
Adjusts the brightness of the image.
Brightness
Contrast
•
Press
to darken the image.
•
Press
to lighten the image.
Controls the degree of difference between the lightest
and darkest parts of the picture. Adjusting the contrast
changes the amount of black and white in the image.
•
Press
to decrease the contrast.
•
Press
to increase the contrast.
Color
Temperature
Adjusts the color temperature. At higher color
temperatures, the screen looks colder; at lower color
temperatures, the screen looks warmer.
Degamma
Effects the representation of dark scenery. With greater
gamma value, dark scenery will look brighter.
Color R
Adjusts the red color.
Color G
Adjusts the green color.
Color B
Adjusts the blue color.
19
Saturation
•
Press
image.
to decrease the amount of color in the
•
Press
image.
to increase the amount of color in the
Adjusts the color balance of red and green.
Tint
•
Press
image.
to increase the amount of green in the
•
Press
to increase the amount of red in the image.
Note: "Saturation" and "Tint" functions are not supported under computer
mode.
Image
Projection
Front-Desktop
•
The factory default setting.
Front-Ceiling
•
When you select this function, the projector inverts the
image for ceiling-mounted projection.
Rear-Desktop
•
When you select this function, the projector reverses the
image so that you can project behind a translucent
screen.
English
Adjusts a video image from black and white to fully
saturated colors.
English
20
Rear-Ceiling
•
When you select this function, the projector reverses and
inverts the image at same time. You can project from
behind a translucent screen with ceiling mounted
projection.
Use this function to choose your desired aspect ratio.
Aspect
Ratio
Auto Keystone
Manual
Keystone
•
Auto: Keep the image with original width-height ratio
and maximize the image to fit native horizontal or
vertical pixels.
•
4:3: The image will be scaled to fit the screen and
displayed using a 4:3 ratio.
•
16:9: The image will be scaled to fit the screen and
displayed using a 16:9 ratio.
Automatically adjusts image distortion caused by tilting
projection (±40 degrees).
Manually adjusts image distortion caused by tilting projection
(±40 degrees).
Adjusts the sharpness of the image.
Sharpness
H. Position
(Horizontal
Position)
V. Position
(Vertical
Position)
•
Press
to decrease the sharpness.
•
Press
to increase the sharpness.
•
Press
to move the image left.
•
Press
to move the image right.
•
Press
to move the image down.
•
Press
to move the image up.
Frequency
Changes the projector’s refresh rate to match the frequency
of your computer’s graphics card. If you experience a vertical
flickering bar in the projected image, use this function to
correct it.
Tracking
Synchronizes the signal timing of the display with the graphic
card. If you experience an unstable or flickering image, use
this function to correct it.
21
Note: "Sharpness" function is not supported under computer mode.
Setting
Menu Location
Chooses the OSD menu location on the display screen.
Source Lock
When this function is turned off, the projector will search for
other signals if the current input signal is lost. When this
function is turned on, it will lock the current source channel
before you press "SOURCE" on the control panel or remote
control for next channel.
Closed Caption Enable
Select "On" to enable the function when the selected input
signal carries closed captions.
•
Closed Caption
Captions: An onscreen display of the dialogue, narration,
and sound effects of TV programs and videos that are
closed captioned (usually marked as "CC" in TV listings).
Set your screen aspect ratio to 4:3. The function is not
available when the aspect ratio is "16:9" or "Auto".
This function is only available when a composite video
or S-Video input signal is selected and its system format
is NTSC.
Caption Version
Selects a preferred closed captioning mode. To view captions,
select CC1, CC2, CC3 or CC4 (CC1 displays captions in the
primary language in your area).
English
Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions
are not supported under video mode.
English
22
Security
This projector provides a useful security function for the
administrator to manage the usage of the projector.
Security
Press
to change the "Security" setting. If the security
function is enabled, your must enter "Administrator
Password" first before changing the security setting.
•
Select "On" to enable the security function. You have to
enter password depending on the "Security Mode".
Please refer to "User Password" section for details.
•
If "Off" is selected, you can switch on the projector
without password.
Timeout (Min.)
Once "Security" is set to "On", you can set timeout function.
•
Press
•
The range is from 10 to 990 minutes.
to select timeout duration.
•
When time is up, the projector will request you to enter
the password again.
•
The factory default setting of "Timeout (Min.)" is "Off".
•
Once the security function is enabled, the projector will
request you to enter password when switching on the
projector. Both "User Password" and "Administrator
Password" can be accepted for this dialogue.
User Password
•
Press
to set up or change "User Password".
•
Use the numerical keys on the remote control to set the
password and press "MENU" to confirm.
•
To delete the digits, Press
•
Enter the password again when you see "Confirm
Password" displayed.
•
The password should be 4~8 digits in length.
•
If you select "Request password only after plugging
power cord", you are requested to input the password
every time the power cord is plugged.
•
If you select "Always request password while projector
turns on", you are requested to input the password every
time the projector is turned on.
.
23
•
Press
to change "Administrator Password".
The factory default of "Administrator Password" is
"1234".
If you forget your administrator password, do the following
to retrieve the administrator password:
•
VGA OUT
(Standby)
•
Enter the unique 6-digit "Universal Password" which is
printed on the Security Card that came with your
projector. This unique password will be accepted by the
projector no matter what the administrator password is.
•
If the Security Card is lost, please contact your local Acer
service center.
Selecting "On" enables the function. The projector can output
a VGA signal when it is in standby mode and the VGA IN and
VGA OUT sockets are correctly connected to the devices.
Enabling this function slightly increases the standby
power consumption.
Reset
Press
after choosing "Yes" to return the display
parameters on all menus to the factory default settings.
Management
ECO Mode
Choose "On" to dim the projector lamp, which will also
lower the power consumption, reduce noise, and extend
the lamp life. Choose "Off" to return to the normal mode.
English
Administrator Password
You can enter "Administrator Password" when the "Enter
Administrator Password" or "Enter Password" dialogue box
displays.
English
24
High Altitude
Choose "On" to turn on the High Altitude mode. When
this function is turned on, the projector fans operate at full
speed continuously to cool down the projector’s
temperature.
Auto Shutdown
(Minutes)
The projector will automatically shut down while there is
no signal input detected after the setting time.
Lamp Hour Elapse Displays the lamp’s elapsed operating time (in hours).
Lamp Reminding
Lamp Hour Reset
Choose this function to show or to hide warning message
when the changing lamp message is displayed. The
message will show up 30 hours before end of life.
Press
after choosing "Yes" to turn the lamp hour
counter to 0 hours.
Audio
Volume
Mute
Power On/Off
Volume
•
Press
to decrease the volume.
•
Press
to increase the volume.
•
Choose "On" to turn mute on.
•
Choose "Off" to turn mute off.
Select this function to adjust the notification volume
when turning the projector on/off.
25
English
Timer
Timer Location
Choose the location of the timer on the screen.
Timer Start (or
Stop)
Press
Timer Period
(Minutes)
Press
Timer Volume
Select this function to adjust the notification volume
when the timer function is enabled and time is up.
Timer Display
Press
to start or stop the timer.
to adjust the timer period.
to choose a timer display mode.
Language
Language
Sets a language for the OSD menus. Use
select your preferred language.
•
Press
to confirm the selection.
to
English
26
Appendices
Troubleshooting
If you experience a problem with your Acer projector, refer to the following
troubleshooting guide. If the problem persists, please contact your local reseller
or service center.
Image Problems and Solutions
#
1
2
Problem
No image appears
onscreen
Partial, scrolling
or incorrectly
displayed image
(For PC (Windows
95/98/2000/XP))
Solution
•
Make sure all the cables are correctly connected as
described in the "Getting Started" section.
•
Ensure none of the connector pins are bent or
broken.
•
Check if the projection lamp has been securely
installed. Please refer to the "Replacing the Lamp"
section.
•
Make sure you have removed the lens cap and the
projector is switched on.
•
Press "RESYNC" on the control panel or remote
control.
•
For an incorrectly displayed image:
•
Open "My Computer > Control Panel," and
then double-click the "Display" icon.
•
Select the "Settings" tab.
•
Verify that your display resolution setting is
lower than or equal to WXGA+ (1440 x 900).
•
Click the "Advanced Properties" button.
If the problem still appears, change the monitor display
you are using and follow the steps below:
•
Verify that the resolution setting is lower than
or equal to WXGA+ (1440 x 900).
•
Click the "Change" button under the
"Monitor" tab.
•
Click "Show all devices > Standard monitor
types" under the SP box, and choose the
resolution mode you need under the "Models"
box.
•
Verify that the resolution setting of the
monitor display is lower than or equal to
WXGA+ (1440 x 900).
27
4
5
6
7
8
Partial, scrolling
or incorrectly
displayed image
(For notebooks)
The screen of the
notebook
computer is not
displaying your
presentation
Image is unstable
or flickering
Image has vertical
flickering bar
Image is out of
focus
Image is stretched
when displaying a
"widescreen"
DVD title
•
Press "RESYNC" on the control panel or remote
control.
•
For an incorrectly displayed image:
•
Follow the steps for item 2 (above) to adjust
the resolution of your computer.
•
Press the toggle output settings. Example:
[Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8],
Gateway [Fn]+[F4], IBM [Fn]+[F7], HP
[Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5]
•
If you experience difficulty changing resolutions or
your monitor freezes, restart all equipment
including the projector.
•
If you are using a Microsoft® Windows® based
notebook: Some notebook PCs may deactivate their
own screens when a second display device is in use.
Each has a different way to be reactivated. Refer to
your computer's manual for detailed information.
•
If you are using an Apple® Mac® OS based
notebook: In System Preferences, open Display and
select Video Mirroring "On."
•
Use "Tracking" to correct it. Refer to the "Image
Setting" section for more information.
•
Change the display color setting on your computer.
•
Use "Frequency" to make an adjustment. Refer to
the "Image Setting" section for more information.
•
Check and reconfigure the display mode of your
graphics card to make it compatible with the
projector.
•
•
•
Make sure the lens cap is removed.
Adjusts the focus ring on the projector lens.
Make sure the projection screen is within the
required distance of 3.9 to 37.2 feet (1.2 to 11.3
meters) from the X1130/X1230/X1230K/X1235
projector, or 1.6 to 18.0 feet (0.5 to 5.5 meters) from
the X1230S projector. Refer to the "How to Get a
Preferred Image Size by Adjusting Distance and
Zoom" section for more information.
When you play a DVD encoded in anamorphic or 16:9
aspect ratio you may need to adjust the following
settings:
•
If you play a 4:3 format DVD title, please change the
format to 4:3 in the projector OSD.
•
If the image is still stretched, you will also need to
adjust the aspect ratio. Set up the display format to
16:9 (wide) aspect ratio on your DVD player.
English
3
English
28
9
10
11
Image is too small
or too large
Image has slanted
sides
Image is reversed
•
•
Adjust the zoom lever on the top of the projector.
•
Press "MENU" on the control panel or remote
control. Go to "Image > Aspect Ratio" and try
different settings.
•
If possible, reposition the projector so that it is
centered on the screen and below the bottom of the
screen.
•
Press the Keystone correction keys on the control
panel or remote control until the image becomes
square.
•
Press "MENU" on the control panel or remote
control to open the OSD menu. Go to "Image > Auto
Keystone" or "Image > Manual Keystone" to make
adjustments.
•
Select "Image > Projection" on the OSD and adjust
the projection direction.
Move the projector closer to or further from the
screen.
Problems with the Projector
#
Condition
Solution
1
The projector stops responding
to all controls
If possible, turn off the projector, then
unplug the power cord and wait at least 30
seconds before reconnecting power.
2
Lamp burns out or makes a
popping sound
When the lamp reaches the end of its useful
life, it will burn out and may make a loud
popping sound. If this happens, the projector
will not turn on until the lamp module has
been replaced. To replace the lamp, follow
the procedures in the "Replacing the Lamp"
section.
29
#
1
Condition
Message
Message Reminder
Fan Fail - the system fan is not working.
Fan Fail.
Lamp will automatically turn off soon.
Projector Overheated - the projector has exceeded its
recommended operating temperature and must be allowed to
cool down before it is used. Please also check the dust filters if
they are installed. If the dust filter is clogged with dust, please
clean it. Please refer to "Cleaning and replacing the dust
filter" for details.
Projector Overheated.
Lamp will automatically turn off soon.
Replace the lamp - the lamp is about to reach its maximum
lifetime. Prepare to replace it soon.
Lamp is approaching the end of its useful life in full power operation.
Replacement suggested!
English
OSD Messages
English
30
LED & Alarm Definition Listing
LED Messages
Message
Power LED
Lamp LED
Temp LED
Red
Blue
Red
Red
Standby
(Power cord plugged in)
V
--
--
--
Power on
--
V
--
--
Lamp retry
--
Quick
flashing
--
--
Turning off (Cooling
state)
Quick
flashing
--
--
--
Turning off (Cooling
completed)
V
--
--
--
Error (Thermal failure)
--
V
--
V
Error (Fan lock failure)
--
V
--
Quick
flashing
Error (Lamp breakdown)
--
V
V
--
Error (Color wheel
failure)
--
V
Quick
flashing
--
31
Use a screwdriver to remove the screw(s) from the cover, and then pull out the
lamp.
The projector will detect the lamp life itself. It will show you a warning message
"Lamp is approaching the end of its useful life in full power operation.
Replacement Suggested!" When you see this message, change the lamp as soon
as possible. Make sure the projector has been cooled down for at least 30
minutes before changing the lamp.
Warning: Lamp compartment is hot! Allow it to cool down before
changing lamp!
1
12
4
2
1
2
3
2
9
2
1
2
10
7
5
11
6
8
To remove the lamp:
1
Turn the projector off by pressing
(POWER).
2
Allow the projector at least 30 mins to cool down.
3
Disconnect the power cord.
4
Use a screwdriver to remove the screws from the cover. (Illustration #1)
5
Push up and remove the cover.
6
Remove the screw that secures the lamp module (Illustration #2).
7
Pull out the lamp connector from a slot in the lamp compartment
(Illustration #3). Disconnect it from the projector (Illustration #4).
8
Lift the handle so that it stands up (Illustration #5). Pull out the lamp
module by force (Illustration #6).
To replace the lamp module, use a new lamp and follow illustrations #
7
- # 12 .
Warning: To reduce the risk of personal injury, do not drop the
lamp module or touch the lamp bulb. The bulb may shatter and
cause injury if it is dropped.
English
Replacing the Lamp
English
32
Ceiling Mount Installation
If you wish to install the projector using a ceiling mount, please refer to the
steps below:
1
Drill four holes into a solid, structurally sound part of the ceiling, and
secure the mount base.
Note: Screws are not included. Please obtain the appropriate
screws for your type of ceiling.
2
Secure the ceiling rod using the appropriate type of cylinder screws.
Ceiling Mount
Base
- Attach to
ceiling
Short Rod
Long Rod
Extension Rod
Screw Type A
50 mm length / 8 mm diameter -
Long Cylinder Cap
Allen Key
- For tighten/loosen
Tightening Screw
Medium Rod
33
Use the appropriate number of screws for the projector size to attach the
projector to the ceiling mount bracket.
Screw Type B
Large Washer
Smaller Washer
Screw Type C
Sliding Extension
Projector Bracket
Supports projector and
allows for adjustments
Spacer
- For heat dissipation
Note: It is recommended that you keep a reasonable space
between the bracket and the projector to allow for proper heat
distribution. Use two washers for extra support, if deemed
necessary.
4
Attach the ceiling bracket to the ceiling rod.
Tightening Screw
Screw Type A
50 mm length /8 mm diameter
Large cylinder cap
Allen Key
- For tighten/loosen
English
3
5
Adjust the angle and positioning as necessary.
Tightening Screw
Allen Key
Allen Key
Tightening Screw
Note: The appropriate type of screw and washer for each model is
listed in the table below. 3 mm diameter screws are enclosed in
the screw pack.
Models
X1130/X1230/
X1230K/X1230S/
X1235/
Screw Type B
Washer Type
Diameter (mm)
Length (mm)
Large
Small
3
25
V
V
119 mm
English
34
Screw M3
Depth 9.5 mm
189 mm
35
The specifications below are subject to change without notice. For final specs,
please refer to Acer's marketing documentation.
Projection system
DLP™
Resolution
•
X1130:
Native: SVGA (800 x 600)
Maximum: SXGA (1280 x 1024), WXGA+ (1440 x 900)
•
X1230/X1230K/X1230S/X1235
Native: XGA (1024 x 768),
Maximum: SXGA (1280 x 1024), WXGA+ (1440 x 900)
Computer compatibility
IBM PC and compatibles, Apple Macintosh, iMac and
VESA standards: WXGA+ (1440 x 900), WXGA (1280 x
800, 1280 x 768), SXGA (1280 x 1024), XGA (1024 x
768), SVGA (800 x 600), VGA (640 x 480)
Video compatibility
NTSC (3.58/4.43), PAL (B/D/G/H/I/M/N), SECAM (B/D/G/
K/K1/L), HDTV (720p, 1080i), EDTV (480p, 576p), SDTV
(480i, 576i)
Aspect ratio
4:3 (native), 16:9
Displayable colors
16.7 million colors
Projection lens
•
X1130/X1230/X1230K/X1235:
F = 2.56 - 2.8, f = 21.00 mm - 23.00 mm,
1:1.1 Manual Zoom and Manual Focus
•
X1230S:
F = 2.5, f = 10 mm, Manual Focus
Projection screen size (diagonal)
•
X1130/X1230/X1230K/X1235:
29" (73 cm) - 300" (762 cm)
•
X1230S:
27" (69 cm) - 300" (762 cm)
Projection distance
•
X1130/X1230/X1230K/X1235:
3.9' (1.2 m) - 37.2' (11.3 m)
•
X1230S:
1.6' (0.5 m) - 18.0' (5.5 m)
Throw ratio
Horizontal scan rate
•
X1130/X1230/X1230K/X1235: 53" @ 2 m (1.86 2.04 : 1)
•
X1230S: 109" @ 2 m (0.90 : 1)
31 - 93 kHz
Vertical refresh scan rate
48 - 86 Hz
Lamp type
Philips 189 W user-replaceable UHP
Keystone correction
+/-40 Degrees (Vertical), Manual & Auto
Digital zoom
2X
Audio
•
•
X1130: N/A
Weight
•
X1130/X1230/X1230K/X1235:
Approximate 2.3 kg (5.07 lbs.)
•
X1230S: Approximate 2.5 kg (5.51 lbs.)
X1230/X1230K/X1230S/X1235: 2 W x 1
English
Specifications
English
36
Dimensions (W x D x H)
264 x 225 x 95 mm (10.4" x 8.6" x 3.7")
Power supply
Universal AC input 100 - 240 V, input frequency 50/60
Hz
Power consumption
280 W
Operating temperature
0ºC to 40ºC / 32ºF to 104ºF
I/O connectors
•
•
•
•
•
Power socket x 1
RS232 x 1
VGA input x 1
Composite video x 1
S-Video x 1
Below items are for X1230/X1230K/X1230S/
X1235 only.
Standard package contents
•
•
•
3.5 mm audio jack input x 1
•
•
•
•
•
•
•
•
•
AC power cord x 1
VGA output x 1
3.5 mm audio jack output x 1
VGA cable x 1
Composite video cable x 1
Remote control x 1
Battery x 2 (for the remote control)
User's guide (CD-ROM) x 1
Quick start guide x 1
Security card x 1
Carrying case x 1
* Design and specifications are subject to change without notice.
37
1
English
Compatibility Modes
VGA Analog - PC Signal
Mode
Resolution
VGA_60
VGA_72
VGA_75
640 x 480
VGA_85
V.Frequency [Hz]
H.Frequency [KHz]
59.940
31.469
72.809
37.861
75.000
37.500
85.008
43.269
720 x 400_70
720 x 400
70.087
31.469
720 x 400_85
720 x 400
85.000
37.900
SVGA_56
56.000
35.200
SVGA_60
60.317
37.879
72.188
48.077
SVGA_75
75.000
46.875
SVGA_85
85.061
53.674
XGA_60
60.004
48.363
70.069
56.476
75.029
60.023
84.997
68.667
70.000
63.800
75.000
67.500
SVGA_72
XGA_70
XGA_75
800 x 600
1024 x 768
XGA_85
SXGA_70
SXGA_75
1152 x 864
SXGA_60
1280 x 1024
60.020
63.981
1280 x 960_60
1280 x 960
60.000
60.000
Mac G4
640 x 480@60Hz
59.94
31.469
MAC13
640 x 480@67Hz
66.667
35.000
Mac G4
800 x 600@60Hz
60.317
37.879
MAC16
832 x 624@75Hz
74.546
49.722
Mac G4
1024 x
768@60Hz
60.004
48.363
English
38
1024 x
768@75Hz
1152 x
870@75Hz
MAC19
MAC21
WXGA_60
1280 x 768
WXGA_75
2
3
75.020
60.241
75.060
68.680
60.000
47.400
74.890
60.290
WXGA_60
1280 x 720
59.94
45.000
WXGA_60
1280 x 800
59.81
49.702
WXGA+_60
1440 x 900
59.887
59.935
16:9 timing
1366 x 768
59.790
47.712
16:9 timing
1024 x 576
59.899
35.880
Acer AspireOne
1024 x 600
60.000
37.500
YPbPr Signal
Modes
Resolution
V.Frequency [Hz]
H.Frequency [KHz]
480i
720 x 480
(1440 x 480)
59.94
15.73
480p
720 x 480
59.94
31.47
576i
720 x 576
(1440 x 576)
50.00
15.63
576p
720 x 576
50.00
31.25
720p
1280 x 720
60.00
45.00
720p
1280 x 720
50.00
37.50
1080i
1920 x 1080
60.00
33.75
1080i
1920 x 1080
50.00
28.13
Video, S-Video Signal
Modes
V.Frequency [Hz]
H.Frequency [KHz]
fsc (MHz)
NTSC
15.73
60
3.58
PAL
15.63
60
4.43
39
15.63
60
4.25 or 4.41
PAL-M
15.73
60
3.58
PAL-N
15.63
60
3.58
PAL-60
15.73
60
4.43
NTSC4.43
15.73
60
4.43
English
SECAM
English
40
Regulations and safety notices
FCC notice
This device has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This device generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television
reception, which can be determined by turning the device off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the device and receiver.
•
Connect the device into an outlet on a circuit different from that to which
the receiver is connected.
•
Consult the dealer or an experienced radio/television technician for help.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to
comply with the Class B limits may be attached to this equipment. Operation
with non-certified peripherals is likely to result in interference to radio and TV
reception.
Caution
Changes or modifications not expressly approved by the manufacturer could
void the user's authority, which is granted by the Federal Communications
Commission, to operate this device.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Notice: Canadian users
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du
Canada.
Canada — Low-power license-exempt radio
communication devices (RSS-210)
a
Common information
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference
that may cause undesired operation of the device.
b
Operation in 2.4 GHz band
To prevent radio interference to the licensed service, this device is
intended to be operated indoors and installation outdoors is subject
to licensing.
Declaration of Conformity for EU countries
Acer hereby, declares that this projector series is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
Compliant with Russian regulatory certification
Radio device regulatory notice
Note: The regulatory information below is for models with
wireless LAN and/or Bluetooth only.
General
This product complies with the radio frequency and safety standards of any
country or region in which it has been approved for wireless use. Depending on
configurations, this product may or may not contain wireless radio devices (such
as wireless LAN and/or Bluetooth modules). The below information is for
products with such devices.
English
Remarque à l'intention des utilisateurs canadiens
English
41
English
42
European Union (EU)
R&TTE Directive 1999/5/EC as attested by conformity with the following
harmonized standard:
•
•
•
Article 3.1(a) Health and Safety
•
EN60950-1:2001 + A11:2004
•
EN50371:2002
Article 3.1(b) EMC
•
EN301 489-1 V1.6.1
•
EN301 489-3 V1.4.1 (Applicable to non-bluetooth wireless
keyboard mouse set).
•
EN301 489-17 V1.2.1
Article 3.2 Spectrum Usages
•
EN300 440-2 V1.1.2 (Applicable to non-bluetooth wireless
keyboard mouse set).
•
EN300 328 V1.7.1
•
EN301 893 V1.4.1 (Applicable to 5GHz high performance
RLAN)
List of applicable countries
EU member states as of May 2004 are: Belgium, Denmark, Germany, Greece, Spain, France,
Ireland, Italy, Luxembourg, the Netherlands, Austria, Portugal, Finland, Sweden, United
Kingdom Estonia, Latvia, Lithuania, Poland, Hungary, Czech Republic, Slovak Republic,
Slovenia, Cyprus and Malta. Usage allowed in the countries of European Union, as well as
Norway, Switzerland, Iceland and Liechtenstein. This device must be used in strict
accordance with the regulations and constraints in the country of use. For further
information, please contact a local office in the country of use.
www.acer.com
Federal Communications Commission
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
The following local Manufacturer / Importer is responsible for this declaration:
Product:
DLP Projector
Model Number:
QSV0812/QNX0813/QNX0816/
QNX0814/QNX0815
X1130/X1230/X1230K/
X1230S/X1235/ series
Machine Type:
Name of Responsible Party:
Acer America Corporation
Address of Responsible Party:
333 West San Carlos St.
San Jose, CA 95110
U. S. A.
Contact Person:
Acer Representative
Phone No.:
254-298-4000
Fax No.:
254-298-4147
English
Acer America Corporation
333 West San Carlos St., San Jose
CA 95110, U. S. A.
Tel: 254-298-4000
Fax: 254-298-4147
English
43
English
44
Acer Incorporated
8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih
Taipei Hsien 221, Taiwan
Declaration of Conformity
We,
Acer Incorporated
8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, Taiwan
Contact Person: Mr. Easy Lai
Tel: 886-2-8691-3089 Fax: 886-2-8691-3120
E-mail: easy_lai@acer.com.tw
Hereby declare that:
Product:
Trade Name:
Model Number:
Machine Type:
DLP Projector
Acer
QSV0812/QNX0813/QNX0816/QNX0814/QNX0815
X1130/X1230/X1230K/X1230S/X1235 series
Is compliant with the essential requirements and other relevant provisions of the following EC directives
and that all the necessary steps have been taken and are in force to assure that production units of the same
product will continue comply with the requirements.
EMC Directive 2004/108/EC as attested by conformity with the following harmonized standards:
-. EN55022: 2006, AS/NZS CISPR22: 2006, Class B
-. EN55024: 1998 + A1: 2001 + A2:2003
-. EN61000-3-2: 2006, Class A
-. EN61000-3-3: 1995 + A1: 2001+A2: 2005
Low Voltage Directive 2006/95/EC as attested by conformity with the following harmonized
standard:
-. EN60950-1: 2001 + A11: 2004
Council Decision 98/482/EC (CTR21) for pan- European single terminal connection to the Public
Switched Telephone Network (PSTN).
RoHS Directive 2002/95/EC on the Restriction of the Use of certain Hazardous Substances in
Electrical and Electronic Equipment
The standards listed below are applied to the product if built with WLAN module or wireless
keyboard and mouse.
R&TTE Directive 1999/5/EC as attested by conformity with the following harmonized standard:
•
Article 3.1(a) Health and Safety
-. EN60950-1:2001 + A11:2004
-. EN50371:2002
•
Article 3.1(b) EMC
-. EN301 489-1 V1.6.1
-. EN301 489-17 V1.2.1
•
Article 3.2 Spectrum Usages
-. EN300 328 V1.7.1
-. EN301 893 V1.4.1 (Applicable to 5GHz high performance RLAN).
Year to begin affixing CE marking 2009.
_______________________________
Easy Lai /Manager
Regulation Center, Acer Inc.
Download PDF

advertising