Magnavox 50MF412B Owner`s manual

Owner’s Manual
Manual del Propietario
Manuel du Propriétaire
50MF412B
39MF412B
Necesita ayuda
inmediata?
www.magnavox.com/support
www.magnavox.com/support
www.magnavox.com/support
1 866 341 3738
1 866 341 3738
1 866 341 3738
2
Contents
1 Notice
5
2 Important
6
6
6
6
Positioning the TV
Regulatory notices
Environmental care
3 Get started
Features
Supplied accessories
Symbols used in this Owner’s Manual Stand assembly Attaching the base
Mounting the unit on your furniture
Managing cables
Installing the remote control batteries
Remote control
Control panel
Terminals
Connecting the antenna or the cable
Plugging in the AC power cord
Initial setup
7
7
7
7
8
8
8
9
9
10
11
11
12
12
13
4 Use your TV
14
14
14
14
15
15
15
15
16
16
17
5 Use more of your TV
18
18
19
20
20
20
21
21
21
22
22
23
25
26
27
27
27
28
Switching on your TV and putting it in standby mode
Adjusting volume
Switching channels
Watching channels from an external device
Using auto mode
Sleep timer
Switching audio mode
fun-Link options
Changing picture format
TV screen information
Displaying the main menu
Picture
Sound
Setup
Autoprogram
Channel list
Add channels
Antenna confirmation
Features
Caption settings
Child and ratings lock
PC settings
fun-Link (HDMI CEC)
Setting your location to home
E-sticker
Language
USB
6 Upgrade your TV software
29
29
29
7 Connecting devices
30
30
30
8 Useful tips
33
33
33
9 Information
35
35
35
10Specifications
36
11Warranty
37
Checking your current software version
Upgrading the software
Selecting your connection quality
Connecting your devices
FAQ
Troubleshooting
Glossary
Maintenance
English
3
Return your Product Registration Card or visit at
www.magnavox.com/support today to get the very most from your purchase.
Registering your model with MAGNAVOX makes you eligible for all of the valuable benefits listed below, so don't miss out.
Complete and return your Product Registration Card at once or visit at www.magnavox.com/support to ensure:
*Product Safety Notification
By registering your product, you'll receive notification directly from the manufacturer - in the rare case of a
product recall or safety defect.
Know these
safety symbols
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The caution marking is located on the rear or bottom of the cabinet.
*Additional Benefits
Registering your product guarantees that you'll receive
all of the privileges to which you're entitled, including
special money-saving offers.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the apparatus’s enclosure
that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the apparatus.
WARNING:
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Apparatus shall
not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the
apparatus.
CAUTION:
ATTENTION:
To prevent electric shock, match wide blade of plug to wide slot, fully insert.
Pour éviter les choc électriques,introduire la lame la plus large de la fiche dans la borne correspondante de la
prise et pousser jusqu’au fond.
Visit our World Wide Web Site at www.magnavox.com/support
www.CE.org/safety
English
4
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7.Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8.Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9.Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11. Only use attachments / accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart / apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
Note to the CATV system installer:
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building, as close
to the point of cable entry as practical.
Example of Antenna Grounding as per NEC − National
Electric Code
GROUND CLAMP
ANTENNA DISCHARGE
UNIT (NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
ELECTRIC SERVICE
EQUIPMENT
Wall Mount Bracket Kit
Brand: SANUS
•
•
•
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
Funai is not liable for these types of accidents or injury noted below.
Model #
Screw dimension
•
•
50MF412B
F55
M6 x 0.787” (20mm)
•
39MF412B
SAN25b
M4 x 0.472” (12mm)
•
•
ANTENNA LEAD IN WIRE
The recommended Wall Mount Bracket Kit (sold separately)
allows the mounting of the TV on the wall. For detailed information on installing the wall mount, refer to the
Wall Mount Instruction Book.
Funai is not responsible for any damage to the product or injury
to yourself or others if you elect to install the TV Wall Mount
Bracket or mount the TV onto the Bracket on your own.
The Wall Mount Bracket must be installed by experts.
•
•
Install the Wall Mount Bracket on a sturdy vertical wall.
If installed onto a ceiling or slanted wall, the TV and Wall Mount
Bracket may fall which could result in a severe injury.
Do not use screws that are longer or shorter than their specified
length. If screws too long are used this may cause mechanical or
electrical damage inside the TV set. If screws too short are used
this may cause the TV set to fall.
Do not fasten the screws by excessive force. This may damage
the product or cause the product to fall, leading to an injury.
For safety reasons use 2 people to mount the TV onto a Wall
Mounting Bracket.
Do not mount the TV onto the Wall Mounting Bracket while
your TV is plugged in or Turned On. It may result in an electrical
shock injury.
When installing the unit on the wall, allow this much space.
Top:
11.8 inches (30cm)
Left and right side:
5.9 inches (15cm)
Bottom:
3.9 inches (10cm)
English
5
1 Notice
MAGNAVOX is a registered trademark of Philips Electronics North
America Corporation and is used by Funai Electric Co., Ltd. and Funai
Corporation, Inc. under license from Philips Electronics North America. 
Funai reserves the right to change products at any time without being
obliged to adjust earlier supplies accordingly.
The material in this Owner’s Manual is believed adequate for the
intended use of the system. If the product or its individual modules or
procedures are used for purposes other than those specified herein,
confirmation of their validity and suitability must be obtained. Funai
warrants that the material itself does not infringe any United States
patents. No further warranty is expressed or implied.
Funai cannot be held responsible neither for any errors in the content
of this document nor for any problems as a result of the content in this
document. Errors reported to Funai will be adapted and published on
the Funai support website as soon as possible.
Modifications
This apparatus may generate or use radio frequency energy. Changes
or modifications to this apparatus may cause harmful interference
unless the modifications are expressly approved in the Owner’s Manual.
The user could lose the authority to operate this apparatus if an
unauthorized change or modification is made.
Cables
Connections to this device must be made with shielded cables with
metallic RFI / EMI connector hoods to maintain compliance with FCC
Rules and Regulations.
Canadian notice
This Class B Digital apparatus complies with Canadian ICES-003.
Standard Television Receiving Apparatus, Canada BETS-7 / NTMR-7.
Copyright
All other registered and unregistered trademarks are the property of
their respective owners.
Pixel characteristics
This LCD product has a high number of color pixels. Although it has
effective pixels of 99.999% or more, black dots or bright points of light
(red, green or blue) may appear constantly on the screen. This is a
structural property of the display (within common industry standards)
and is not a malfunction.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
Warranty
No components are user serviceable. Do not open or remove covers
to the inside of the product. Repairs may only be done by Service
Centers and official repair shops. Failure to do so shall void any
warranty, stated or implied.
Any operation expressly prohibited in this Owner’s Manual, any
adjustments or assembly procedures not recommended or authorized
in this Owner’s Manual shall void the warranty.
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits
for a Class B Digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one
or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio or television technician
for help.
Declaration of Conformity
Trade Name :
Responsible Party :
Model :
Address :
MAGNAVOX
FUNAI CORPORATION, Inc.
50MF412B, 39MF412B
19900 Van Ness Avenue, Torrance, CA
90501 U.S.A.
Telephone Number : 1 866 341 3738
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
is a trademark of SRS Labs, Inc.
TruSurround XT technology is incorporated
under license from SRS Labs, Inc.
SRS TruSurround XT® creates a truly
immersive surround sound experience with
rich bass and clear dialog from only two
speakers.
Portions of this software are copyright © The FreeType Project
(www.freetype.org).
The American Academy of Pediatrics discourages television viewing
for children younger than two years of age.
© 2012 Funai Electric Co., Ltd. All rights reserved.
No part of this Owner’s Manual may be reproduced, copied,
transmitted, disseminated, transcribed, downloaded or stored in any
storage medium, in any form or for any purpose without the express
prior written consent of Funai. Furthermore, any unauthorized
commercial distribution of this Owner’s Manual or any revision hereto is
strictly prohibited.
English
6
2 Important
Environmental care
Positioning the TV
•
•
•
•
•
•
•
•
•
•
•
•
Large screen TVs are heavy. 2 people are required to carry and
handle a large screen TV.
Make sure to hold the upper and bottom
frames of the unit firmly as illustrated.
Install the unit in a horizontal and stable
position.
Do not install the unit in direct sunlight
or in a place subject to dust or strong
vibration.
Depending on the environment, the temperature of this unit may
increase slightly. This is not a malfunction.
Avoid a place with drastic temperature changes.
Do not place anything directly on top or bottom of the unit.
Depending on your external devices, noise or disturbance of the
picture and / or sound may be generated if the unit is placed too
close to them. In this case, please ensure enough space between
the external devices and the unit.
Do not insert the AC power cord into the power socket outlet
before all the connections are made.
Ensure that you always have easy access to the AC power cord or
plug to disconnect the TV from the power.
Before you move the TV, disconnect attached cables to prevent
damage to connectors.
Be sure to unplug the AC power cord from the AC outlet before
moving or carrying the unit.
Regulatory notices
Do not place the unit on the furniture that is capable of being tilted
by a child and an adult leaning, pulling, standing or climbing on it.
A falling unit can cause serious injury or even death.
This apparatus should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided.
Make sure to leave a space of 4 inches (10cm) or more around this
apparatus.
Press to turn the unit on and go into standby mode.
To completely turn Off the unit, you must unplug the AC power cord.
Disconnect the AC plug to shut the unit off when trouble is found or
not in use. The AC plug shall remain readily available.
Never use a gas duster on this TV.
The gas trapped inside of this unit may cause ignition and explosion.
CAUTION:Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
WARNING:Batteries (battery pack or battery installed) shall not be
exposed to excessive heat such as sunshine, fire or the
like.
WARNING:To prevent injury, this apparatus must be securely
attached to the furniture / wall in accordance with the
instructions. Tipping, shaking, or rocking the unit may
cause injury / death.
The packaging of this product is intended to be recycled.
Contact your local authorities for information about how to recycle the
packaging.
For product recycling information, please visit - www.magnavox.com
End of life directives
This LCD TV contains a lamp with Mercury, please dispose of according
to all local, state and federal laws.
Magnavox pays a lot of attention to produce environment-friendly
products in green focal areas. Your new TV contains materials which can
be recycled and reused. At the end of its life, specialized companies can
dismantle the discarded TV to concentrate the reusable materials and to
minimize the amount of materials to be disposed of. Please ensure you
dispose of your old TV according to local regulations.
Disposal of used batteries
The batteries supplied do not contain the heavy metals mercury and
cadmium. Nevertheless, in many areas batteries may not be disposed
of with your household waste. Please ensure you dispose of batteries
according to local regulations.
English
7
3 Get started
Supplied accessories
Owner’s Manual
Features
•
DTV / Analog TV / CATV
•
Information display
Quick Start guide
Quick
•
Autoprogram
•
Child lock
•
Closed Caption decoder
IMPORTANT
Start
You can use your remote control to select channels which are broadcast in
Digital format and conventional Analog format. Also, cable subscribers can
access their cable TV channels.
You can display the title, contents (DTV only) and other information of the
current program on the TV screen.
Registration card
Remote Control and
batteries (AAA, 1.5V x 2)
TV base and screws
50 inch TVs
This unit automatically scans and memorizes channels available in your area,
eliminating difficult setup procedures.
39 inch TVs
This feature allows you to block children’s access to inappropriate
programs.
MTS / SAP tuner
Audio can be selected from the remote control.
•
Auto Standby
•
Sleep timer
•
Choices for on-screen language
•
•
Stereo sound function
PLL frequency synthesized tuning
AAA
•
AAA
Built-in Closed Caption decoder displays text for Closed Caption
supported programs.
Screws packed with this unit:
Cable management tie
If there is no Input signal and no operation for 15 minutes, the unit will go
into Standby mode automatically.
Model
Quantity
Size
50MF412B
8
M4 x 12
39MF412B
3
M4 x 20
AC power cord (50 inch TVs only)
You can set the unit to go into Standby mode after a specific amount of
time.
Select your on-screen language: English, Spanish or French.
Provides free and easy channel selection and lets you tune directly to any
channel using the number and decimal point “•” buttons on the remote
control.
•
Various adjustment for picture and sound
Customizes image quality suitable for your room and sets your sound
preference.
•
fun-Link via HDMI link
•
•
HDMI Input
HDMI-DVI Input
•
•
•
•
Component Video Input
PC Input
AV Input
USB terminal
•
•
Digital Audio Output
Headphone Audio Output
fun-Link allows your other HDMI link devices to be controlled by the HDMI
cable connected to your TV.
If your video device has DVI Output jack, use an HDMI-DVI conversion
cable to connect the unit.
The picture (JPEG) and video (Motion JPEG) files stored on a USB Memory
Stick can be played back on this unit.
Note
•• If you lose the screws, please purchase the above-mentioned Phillips head screws at
your local store.
•• If you need to replace these accessories, please refer to the part name or No. with
the illustrations and call our toll free customer support line found on the cover of this
Owner’s Manual.
When using a universal remote control to operate this unit.
•• Make sure the component code on your universal remote control is set to our brand.
Refer to the instruction book accompanying your remote control for more details.
•• We do not guarantee 100% interoperability with all universal remote controls.
Symbols used in this Owner’s Manual
The following is the description for the symbols used in this
Owner’s Manual. Description refers to:
Digital TV operation
Analog/Cable TV operation
•
If neither symbol appears, the operation is applicable to both.
English
8
39 inch TVs
Stand assembly
(50 inch TVs only)
1 1 1
2 2 2
1
3 3 3
1
2
1
x 4
2
2
Attaching the base
You must attach the base to the unit to have it as a table top unit.
Be sure the front and rear of the base match the proper direction.
For large screen TVs, at least 2 people are required for these steps.
50 inch TVs
1
4
5
x 3
Note
•• Make sure to use a table which can support the weight of this unit and is larger than
this unit.
•• Make sure the table is in a stable location.
•• When attaching the base, ensure that “FRONT” with “arrow” written on the bottom of
the base is downward. If it’s not downward, the 2 hooks don’t fit into the base.
•• When attaching the base, ensure that all screws are tightly fastened. If the base is not
5
properly attached, it could cause the unit to fall, resulting in injuries as well as damage
to the unit.
•• To remove the base from this unit, unscrew the Phillips head screws in step 2.
Be careful not to drop the base when you remove it.
2
Mounting the unit on your furniture
(39 inch TVs only)
Screw this unit on your furniture tightly using wood screw (not supplied)
in the hole at the back of the base as shown.
x 4
•• Recommended screw dimension : 3/16 x 3/4 inches (5.1 x 20 mm)
rear of this unit
screw hole
Note
•• When you remove this unit make sure to unscrew the wood screw from your Wood
Stand, Furniture and other wood item.
English
9
Managing cables
Route your antenna cable and all other cables through the cable
management tie at the back of the TV.
The holder helps keep your cables tidy and easily manageable.
1
Attach the cable management tie as illustrated below.
2
Pass cables through the cable management tie to avoid tangles.
Installing the remote control batteries
1
2
Slide the battery cover off the back of the remote control.
Insert the 2 supplied batteries (AAA, 1.5V). Be sure the + and −
ends of the batteries line up with the markings inside the case.
3 Slide the cover back into position.
Note
•• Remove the batteries if not using the remote control for an extended period of time.
English
10
a
Remote control
a
j
b
k
l
c
m
d
b
c
d
e
f
g
e
f
g
h
h
n
o
p
i
j
k
i
l
m
n
o
p
(POWER-ON / STANDBY-ON)
ress to Turn the unit On and go into Standby mode. To completely
P
Turn Off the unit, you must unplug the AC power cord.
AUTO MODE
Cycles through preset picture and sound settings.
SAP
Digital Mode (DTV) : Press to select the Audio language.
Analog Mode (Analog TV) : Press to select the Audio mode.
0 − 9 (NUMBER buttons)
Press to select channels.
• (DOT)
Press to shift the subchannel from the main channel.
PREV.CH Press to return to the previously viewed channel.
CH + / −
Press to select channels.
VOL + / −
Press to adjust the volume.
(MUTE)
Press to turn the sound On and Off.
BACK
Press to return to the previous menu operation.
OK
Press to decide the command of setting when the main menu is
displayed.
▲▼◄► (NAVIGATION buttons)
Press to move left / right / up / down through the items.
SOURCE
Toggle to select the connected devices.
SLEEP
Press to activate the sleep timer.
FORMAT
Selects a picture format.
H / G Press to skip backward or forward chapters, titles or
tracks on a disc.
Press to search backward or forward through the disc.
E / D
LINK
Press to call up various menu’s from your fun-Link
connected device through an HDMI cable.
Press to stop the disc playback.
C
Press to pause the disc playback.
F
Press to begin or restart the disc playback.
B
COLOR buttons
Functionally useful for fun-Link.
INFO
Displays information about the TV channel or accessory device.
MENU
Press to display the main menu.
English
11
a VOL ◄/►
Control panel
50 inch TVs
a
3
b
4
c
2
d
e
Touch to adjust volume down (◄) / up (►) or to move
left (◄) / right (►) when selecting menu items.
b CH ▲/▼
Touch to select channels or to move up (▲) / down (▼) when
selecting menu items.
c MENU
Touch to display the main menu. d SOURCE
Touch to select the connected devices. e (POWER-ON / STANDBY-ON)
Touch to Turn the unit On and go into Standby mode.
To completely Turn Off the unit, you must unplug the AC power
cord.
f Power On indicator
Lights up red when the unit is in Standby mode and flashes while
the unit is Turning On. g Infrared sensor
Receives IR signals from remote control.
g
f
39 inch TVs
a
f
b
g
c
d
e
Terminals
l
m
h
i
n
j
k
o
h Digital Audio Output jack
Digital Audio (S/PDIF) Output to home theaters and other Digital
Audio systems.
i Component (Y/Pb/Pr) / Composite Video (VIDEO) Input jacks for
VIDEO
Composite Video Input (VIDEO) jack is shared jack with
Component Video Input (Y) jack.
j Analog Audio (L/R) Input jacks
Connect Analog Audio signals from;
- HDMI-DVI / Analog Audio (L/R) jacks signal
- Component Video / Analog Audio (L/R) jacks signal
- Composite Video / Analog Audio (L/R) jacks signal
- PC Connection / Analog Audio (L/R) jacks signal with Stereo
mini 3.5mm plug Audio cable on PC
k HDMI Input jack(s)
Digital audio and video Input from high definition Digital devices
such as Blu-ray disc players, cable boxes and satellite set-top
boxes.
l PC Input jack
VGA cable connection for PC.
m USB terminal
Data Input from USB Memory Stick only.
Do not connect any device to this terminal such as; Digital
camera, keyboard, mouse, etc.
n 75 ohm Cable / Antenna connection
Signal Input from an antenna, cable or satellite.
o Headphone Audio Output jack
Headphone 3.5mm stereo jack for personal listening.
English
12
Connecting the antenna or the cable
Be sure your antenna or other device is connected properly before
plugging in the AC power cord.
Connecting a set-top box, Blu-ray disc / DVD recorder
via composite connectors and Analog Audio
Do not place your recorder too close to the screen because some
recorders can be susceptible to signals.
If you connect to an antenna through RF cable
Any DTV programs that are broadcasted in your area can be received
for free through an antenna connection.
cable
RF cable
OUT
IN
IN
If the TV is connected to a cable box or satellite set-top box via a
coaxial connection, set the TV to channel 3, 4 or the channel specified
by the service provider.
RF cable
IN
OUT
RF cable
OUT
Audio (L/R) +
Video cables
IN
Audio (L/R) + Video cables
Blu-ray disc/DVD recorder
If you connect a set-top box through RF cable
IN
OUT
OUT
RF cable
antenna
set-top box
IN
RF cable
IN
antenna
cable
OUT
set-top box
If you connect a set-top box through HDMI
If the TV is connected to a cable box or satellite set-top box via HDMI,
make sure you select the correct Source by using SOURCE.
Note
•• If you have any question about the DTV’s antenna, visit www.antennaweb.org for further
information.
•• Depending on your antenna system, you may need different types of combiners
••
••
••
••
••
(mixers) or separators (splitters) for HDTV signal. The minimum RF bandpass on these
devices is 2,000MHz or 2GHz.
For your safety and to avoid damage to this unit, please unplug the RF coaxial cable
from the antenna Input jack before moving the unit.
If you did use an antenna to receive Analog TV, it should also work for DTV reception.
Outdoor or attic antennas will be more effective than a set-top box or inside antenna.
To Turn On your reception source easily between antenna and cable, install an antenna
selector.
If you are not receiving a signal from your cable service, contact the Cable provider.
Only the left loudspeaker reproduces sound for mono equipment. Use a mono to
stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.
Plugging in the AC power cord
Make sure that the AC power cord must be plugged to an AC outlet
after all the necessary connections are made.
Caution
RF cable
IN
OUT
HDMI cable
IN
set-top box
If the TV is connected to a cable box or satellite set-top box via
Component Video Input, make sure you select the correct Component
Video Source by using SOURCE.
RF cable
OUT
IN
IN
IN
OUT
Component (Y/Pb/Pr) video cables
this unit (AC 120V).
•• Connecting the AC power cord to a power supply outside of this range may result in
fire or electrical shocks.
Note
If you connect a set-top box through Component Video Input
Audio (L/R) cables
•• Do not connect the AC power cord to a power supply outside the indicated voltage of
set-top box
•• Each time you plug in the AC power cord, no operations will be performed for a few
seconds. This is not a malfunction.
English
13
These operations are accessible by remote control.
Some may also be accessible by control panel on the main unit.
4
Use ▲▼ to select the desired location setting, then press OK.
Initial setup
Retail
Initial setup
This section will guide you through the unit’s initial setting which
includes selecting a language for your on-screen menu and autoprogram,
which automatically scans and memorizes viewable channels.
Location Home is recommended for normal home use.
In the Retail Store mode, all settings are fixed.

Home
Before you begin:
Make sure the unit is connected to antenna or cable.
Select
1
After making all the necessary connections, press to Turn On the
unit.
• It may take a few moments to Turn On the unit for the first time.
• Initial setup menu appears automatically after the unit is Turned
On.
2 Use ▲▼ to select the on-screen language from the choices
(English / Español / Français) on the right side of the TV screen, then
press OK.
3 Use ▲▼ to select Antenna for TV channels or Cable for CATV
channels, then press OK.
Initial setup
Make sure the antenna is connected to ‘’ANTENNA IN’’ jack.
Select your signal source.
Antenna
Antenna
Cable
Skip
OK
• Select Retail, the unit will be set up with predefined setting for
retail displays.
• Select Home, the unit is set to maximize the energy efficiency
for home setting and it can be adjusted through a choice of
picture and sound quality according to your preference. Use this
setting to remove the E-sticker if visible from the display. ➠ p. 27
• When the initial setup is completed, the lowest memorized
channel with the confirmation message of the location setting
will be displayed on the TV screen.
• You must set Home in step 4. Otherwise, Picture and Sound
settings you adjusted will not be memorized after the unit goes
into Standby mode.
Note
•• If you are not receiving a signal from your cable service, contact the Cable provider.
•• If you press or MENU during autoprogram, this setup of TV channels will be
canceled.
Cable
•• The initial autoprogram function can be executed for either Antenna or Cable only
Or
ANTENNA IN
Select
OK
Back
Skip
–– When Antenna is selected, the TV detects antenna signals. It
searches for DTV and Analog TV channels available in your area.
–– When Cable is selected, the TV detects signals supplied by cable. It
searches for DTV, Analog TV and Cable channels available in your
area.
• Autoprogram will begin.
Initial setup
Please wait while the system is scanning for channels.
Auto programming may take more than 20 minutes to
complete.
0%
Digital channels
0 ch
Analog channels
0 ch
Skip
once. When you change the connection (Antenna / Cable), set Autoprogram again.
➠ p. 20
•• If there is no signal Input from the antenna terminal and no operation for several
seconds after you Turn On the unit, helpful hints appears. Follow the instructions listed
on the TV screen.
Initial setup
No channel is registered.
Try Autoprogram again?
Verify that you have a cable connected to the “ANTENNA IN” jack
on the back of the TV, the channel installation process
searches this connection. If you are using a cable or satellite
box, please confirm the input which you have connected to
the box and press “SOURCE” key on the remote control to
select the appropriate source input.

Select
OK
Retry
Later
Skip
After an initial setup is completed...
• If you want to scan the channels automatically again.
Autoprogram ➠ p. 20
• You can add the desired cable and Analog channels
unmemorized by autoprogram.
Add channels
➠ p. 21
• If you want to change to another language.
Language ➠ p. 27
• If you want to change the location setting.
Location ➠ p. 27
English
14
4 Use your TV
Switching channels
Switching on your TV and putting it in standby
mode
•• The above image is an example for 50 inch screen size TVs.
It may differ depending on what product you purchased.
To Turn Power On or to Turn Standby On
•
Touch or press . on the front panel or the remote control.
Note
•• Energy consumption contributes to air and water pollution. When the AC power
cord is plugged in, your TV consumes energy. Your TV has very low standby power
consumption.
Adjusting volume
•• The above image is an example for 50 inch screen size TVs.
It may differ depending on what product you purchased.
To select Channels by using CH ▲/▼ or CH + / −
•
ouch CH ▲(up) / ▼(down) on the front panel or press CH + / −
T
on the remote control.
To select Channels by using the NUMBER buttons
Digital TV operation
•
For Digital channels, press a number followed by a dot “•” and the
corresponding sub channel number. –– When selecting Digital channel 11.1
Be sure to press • before entering the subchannel number.
Analog/Cable TV operation
•• The above image is an example for 50 inch screen size TVs.
It may differ depending on what product you purchased.
To increase or decrease volume
•
Touch VOL ◄(down) / ►(up) on the front panel or press
VOL + / − on the remote control.
To mute or unmute sound
•
•
Press
Press
on the remote control to mute the sound.
again or VOL + / − to recover the original sound.
–– When selecting cable or Analog channel 11
Press PREV.CH to return to the previously viewed channel.
Note
•• To select the non-memorized channels, use the NUMBER buttons.
•• No Signal will appear on the TV screen after the subchannel broadcast is over.
•• Audio only program message will appear on the TV screen, when you receive only
sound signal.
English
15
Watching channels from an external device
Sleep timer
Switching Each Input Mode can easily switch with the remote control
between TV (DTV or Analog TV) and external devices when they are
connected to the unit.
Sleep Timer can set the unit to go into Standby mode after an
incremental period of time.
1
Turn On a set-top box or the connected device.
• The picture from your set-top box or the connected device
might appear automatically on the TV screen.
If the picture does not appear
Press SLEEP repeatedly to change the amount of
Sleep
120min.
time (increases the time by 30 minutes up to 120
minutes).
Press SLEEP once to call up the display for checking the remaining time.
Press SOURCE repeatedly to select the set-top box or the
connected device and wait a few seconds till the picture appears.
•
To cancel sleep timer, press SLEEP repeatedly until Off is displayed.
e.g.)
Source
TV
HDMI1
HDMI2
HDMI3
Video
PC
11.1
HDMI1
HDMI2
DTV / AnalogTV
channel
Switching audio mode
Video
or
HDMI3
Component
• Pressing ▲ reverses the direction of the Input modes.
PC
2Use the remote control of the set-top box or the connected device
to select channels.
1Press SAP to display the currently selected
language and the number of available languages.
Using auto mode
1
Digital TV operation
11.1
English 1/3
2Press SAP repeatedly to cycle through the available audio languages.
Press AUTO MODE to set your TV to a predefined picture and
sound setting.
Note
•• Available languages differ depending on the broadcast.
•• Other is displayed when the audio language cannot be acquired or the acquired
languages are other than English, French or Spanish.
Analog/Cable TV operation
2
Use ▲▼to select one of the following settings :
Auto picture
Auto sound
Description
Personal
The customized settings you defined using
the Picture and Sound menu
Standard
For normal TV viewing
Enhanced picture contrast, sharpness and
sound for viewing in a well-lit room
Vivid
Sports
Brilliant picture settings and clear sound for
high action
Movie
Deep picture and powerful sound settings
for a cinematic experience
Game
-
Optimized for PCs and game consoles
Eco
-
Eco TV settings for low power
consumption
-
Music
Optimized for music playback
-
News
Controls picture tone and set the anchor's
voice at a comfortable volume
1
2
Press SAP to display the currently selected audio mode.
While receiving an MTS broadcast, press
repeatedly to cycle through the available audio
channels.
e.g.) When all audio are available
SAP / STEREO
SAP / MONO
SAP / STEREO
STEREO: Outputs stereo-audio
SAP : Outputs second audio program
MONO : Outputs mono-audio
11
SAP / STEREO
English
16
For 16:9 video signal
fun-Link options
If you have our brand products such as Blu-ray disc player or DVD
recorder that are compatible with fun-Link functions, connect them to
this unit via an HDMI cable so you can simply operate various items
from this unit’s remote control.
Before you begin:
You must set On in Device control and fun-Link control. ➠ p. 26
Otherwise, LINK does not work even if you connected our brand
devices to this unit.
To enjoy fun-Link, verified and recommended devices are as
follows;
MAGNAVOX
MBP1300
1
MBP5320
MRD430B
MRD733B
Press LINK to display fun-Link options menu.
fun-Link options
Device-menu
Normal
Device-menu
Controls the menu of your connected fun-Link device.
Movie expand
Full can also be selected
after Wide if an HDMI
device is selected. This
picture format similarly
displays like Normal.
Full (HDMI device only)
Normal
4:3
Movie expand
Wide
Zoom
Original size.
Shortened horizontally.
Sidebars appear on both edges of the screen.
Vertically stretched to fill the screen.
This only crops out the top of the picture.
Zoom
Maximum size without changing its horizontal and vertical
ratio.
Wide
Horizontally stretched picture.
This crops out the left and right sides of the picture.
Device-contents
Device-favorite
4:3
For 4:3 video signal
Device-contents Controls the top menu of your DVD or Blu-ray discs.
Device-favorite
2
Controls the pop-up menu of your Blu-ray discs.
Use ▲▼or OK on this unit’s remote control to operate the
desired functions for your devices.
Note
•• Some of fun-Link functions may not be available depending on your fun-Link devices
or discs.
•• You must connect this unit to our brand fun-Link devices and be sure its
fun-Link (HDMI CEC) setting is also set to On.
•• We do not guarantee 100% interoperability with other brands of HDMI link compliant
devices.
Normal
Full (HDMI device only)
Normal
16:9
Movie expand
Changing picture format
Display modes can be selected when your TV receives a 16:9 or 4:3
video signal.
Three types of display modes can be selected for a PC Input signal.
Press FORMAT repeatedly to switch the TV aspect ratio.
16:9
Movie expand
Full can also be selected
after Wide if an HDMI
device is selected. This
picture format similarly
displays like 16:9.
Wide
Zoom
Original size.
Sidebars appear on both edges of the screen.
Stretched horizontally to fill the screen.
Stretched more vertically at the top of the screen.
This crops out the top of the picture.
Zoom
Maximum size that is more vertically stretched to fill the
screen.
This crops out the top and bottom of the picture.
Wide
Original size and the edges stretched horizontally to fill the
screen.
For PC Input signal
Normal
Full
Unscaled
•• This unit can also be connected to your PC that has a DVI terminal. Use an HDMI-DVI
conversion cable for this Video connection and it requires Stereo mini 3.5mm plug Audio
cable for Analog Audio signal as well.
•• Refer to 16:9 video signal on this page if PC has HDMI Output.
Normal
Proportionately stretched picture.
Sidebars appear on both edges of the screen.
Full
Stretched out of proportion to fill the screen.
Unscaled
Original size.
English
17
TV screen information
You can display the currently selected channel or other information
such as the aspect ratio on the TV screen.
In the Digital mode, the detailed broadcasting information for the
current off the air channel such as program title and program guides are
displayed.
1
Press INFO.
Digital TV operation
a
b
c
A Day of Memories
d
11.1
KABC
A quarter-century ago,which may now qualify as the
good old days of newspapering,run-of-paper sales
accounted for 80 percent of the industry's advertising
revenues. Department stores and supermarket were
English 1/2
1080i
HD
Rating
16:9
e
f
CC
TV: TV-14
g
h
a program title
b program guide
(The program guide added to broadcasting information is
displayed to a maximum of 4 lines.)
c broadcast station
Analog/Cable TV operation
d
11
SAP / STEREO
480i
SD
TV-PG DLSV
4:3
e
f
CC
g
h
2
d channel number
Switching channels ➠ p. 14
eaudio language (DTV) / audio mode (Analog TV)
Switching audio mode
➠ p. 15
f program’s image aspect ratio
Changing picture format
➠ p. 16
g CC (not available if Closed Caption is set to Off)
Caption settings ➠ p. 22
h child lock rating
Child and ratings lock ➠ p. 23
Press INFO to hide the information.
Note
•• When the program guide consists of more than 4 lines, use ▲▼ to scroll to the
next / previous lines.
•• No description provided. is displayed when the program guide is not provided.
•• While the program guide is displayed, the Closed Caption function is interrupted.
•• In external Input mode, the following screen is displayed;
e.g.) When an external device is connected to Video Input jack.
Video
480i
SD
TV-PG DLSV
4:3
CC
•• The information display will automatically disappear in 5 seconds.
English
18
5 Use more of your TV
This section describes the overview of the main menu displayed when
you press MENU.
The main menu consists of the function setting items below.
Displaying the main menu
1
2
Press MENU to display the main menu.
Use ▲▼ to select the desired menu and an item, then press OK
or use ▲▼◄► to determine the setting.
Picture
➠ p. 19
Adjusting the picture mode or customize the picture
quality as your preference.
Sound
➠ p. 20
Adjusting the sound mode, equalizer and some other
sound functions.
Picture
Sound
Setup
Features
Language
USB
Auto picture
Backlight
Contrast
Brightness
Color
Tint
Sharpness
Advanced settings
Personal
Setup
18
50
30
30
0
2
➠ p. 20
Scanning the channels available in your area and see what
the antenna levels are.
Features
➠ p. 22
Adjusting the Closed Caption, parental guide and some
other useful functions.
Language
➠ p. 27
You can choose English, Spanish or French as your
on-screen language.p
USB
➠ p. 28
You can view picture (JPEG) and video (Motion JPEG) files
stored on a USB Memory Stick.
3
When the setting is completed, press MENU or BACK to exit.
English
19
*You can set a particular about picture quality in Advanced settings.
Picture
Picture
Sound
Setup
Features
Language
USB
Before you begin:
You must set Home in Location. ➠ p. 27
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes into Standby mode.
1
Press MENU and use ▲▼ to select Picture then press OK.
Picture
Sound
Setup
Features
Language
USB
2
Auto picture
Backlight
Contrast
Brightness
Color
Tint
Sharpness
Advanced settings
Personal
18
50
30
30
0
2
to select the desired setting, then press OK
(Personal, Standard, Vivid, Sports, Movie, Game and Eco)
When you adjust the following settings, Personal will
be set automatically.
Backlight
Cursor ◄
to reduce power
consumption
Cursor ►
to set the backlight
brighter
Contrast
to decrease contrast
to increase contrast
Brightness
to decrease brightness
to increase brightness
to decrease color
intensity
to increase color intensity
to add red
to add green
to soften
to sharpen
Color
Tint
Sharpness
* Advanced settings
to select the desired setting, then press OK
(Color alignment, Noise reduction, *Dynamic backlight,
Black stretch, Dynamic contrast and Gamma)
*Dynamic backlight will only display for 50 inch TVs.
Color
temperature
mode
Normal
On
On
On
On
Gamma 2
to set the color temperature to Personal,
Cool, Normal and Warm
When you adjust the following settings,
Personal will be set automatically.
Cursor ◄
Color
alignment
Cursor ►
to decrease contrast
with red
to increase contrast
with red
to decrease contrast
to increase contrast
with green
Blue gain
to decrease contrast
with blue
to increase contrast
with blue
Red offset
to decrease
brightness with red
to increase brightness
with red
to decrease
to increase brightness
to decrease
brightness with blue
to increase brightness
with blue
Red gain
Use ▲▼◄► to select the item you want to adjust, then press
OK.
Auto picture
Color alignment
Noise reduction
Dynamic backlight
Black stretch
Dynamic contrast
Gamma
Green gain with green
Green offset brightness with green with green
Blue offset
Noise
reduction
Off
to set noise reduction to Off
On
to reduce noise in an image
*Dynamic
backlight
Off
to set dynamic backlight to Off
On
to adjust backlight for best picture quality
based on the incoming video signal
Black
stretch
Off
to set black stretch to Off
On
to enhance black color
Off
to set dynamic contrast to Off
On
to enhance contrast in an image automatically
Dynamic
contrast
Gamma 1
Gamma
Gamma 2
Gamma 3
to change the gamma setting
English
20
Sound
Setup
Before you begin:
You must set Home in Location. ➠ p. 27
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes into Standby mode.
1
Before you begin:
Make sure the unit is connected to antenna or cable.
1
Press MENU and use ▲▼ to select Sound, then press OK.
Picture
Sound
Setup
Features
Language
USB
Auto sound
Equalizer
SRS TruSurround XT
Auto volume leveling
TV speakers
Primary MTS
Picture
Sound
Setup
Features
Language
USB
Standard
On
Off
On
Stereo
2
2Use ▲▼◄► to select the item you want to adjust, then press
OK.
Auto sound
to select the desired setting, then press OK.
(Personal, Standard, Vivid, Sports, Movie, Music and
News)
When you adjust the following settings (Equalizer,
SRS TruSurround XT and Auto volume leveling),
Personal will be set automatically. Adjust the tonal quality for each frequency.
Cursor ◄
Equalizer
Cursor ►
to adjust the each level of tonal quality
Press BACK to go back to the previous menu.
This selects sound modes for more spatial or surround sound
reproduction.
SRS TruSurround XT
Off
to set SRS TruSurround XT® to Off
On
to set SRS TruSurround XT® to On
Auto volume
leveling
to remove the auto volume leveling
On
to reduce volume differences between
the TV commercials and the programs
TV speakers
to output sound from the unit’s
speakers
Off
not to output sound from the unit’s
speakers
to control Audio Output from your
connected fun-Link Compliant Devices
CEC Link with VOL + / − by using this unit's
remote control.
You can set the output mode as a default for the sound mode (Analog TV only).
This setting is not interlocked when you change the output mode by
pressing SAP. Refer to Switching audio mode. ➠ p. 15
Primary MTS
Stereo
to output stereo-audio
Mono
to output mono-audio
SAP
to output second audio program
Adjust the following items.
Be sure the RF cable is correctly connected to this unit and you are
registered with your cable TV provider when you install Cable channels.
1Use ▲▼ to select Autoprogram, then press OK.
• If you run Autoprogram when you have locked channels, a
message appears asking to enter your PIN . Enter your PIN in
order to complete the installation. You need to set the channel
lock again after the installation.
2Use ▲▼ to select an appropriate option, then press OK.
–– When Antenna is selected, the TV detects antenna signals.
It searches for DTV and Analog TV channels available in your
area.
–– When Cable is selected, the TV detects signals supplied by cable. It
searches for DTV, Analog TV and Cable channels available in your
area.
Picture
Sound
Setup
Features
Language
USB
You can select the Audio Output from the unit’s speakers or not. If your
amplifier is HDMI link function compatible and connected by an HDMI
cable to this unit, some sound operations such as volume up can be
changed by using this unit’s remote control. Make sure fun-Link control
is set to On. ➠ p. 26
On
Autoprogram
Channel list
Add channels
Antenna
Autoprogram
This function keeps a constant loudness differential between the TV
commercials and the programs.
Off
Press MENU and use ▲▼ to select Setup, then press OK.
Autoprogram will rescan all channels.
Auto programming may take more than 20
minutes to complete.

Back
Antenna
Cable
Select your signal source.
Antenna
Cable
Or
ANTENNA IN
Continued on next page.
English
21
• When the scanning and memorizing are completed, the lowest
memorized channel will be displayed.
Autoprogram
This function lets you add the off the air Analog TV or Analog Cable
channels that were not added by the autoprogram due to reception
conditions during the initial setting.
Please wait while the system is scanning for channels.
Auto programming may take more than 20 minutes to
complete.
1
2
75%
Digital channels
10 ch
Analog channels
6 ch
Add channels
Exit
Note
•• After setting Autoprogram, using CH + / − skips unavailable programs automatically.
•• If you are not receiving a signal from your cable service, contact the Cable provider.
•• If you press or MENU during autoprogram, the setup of TV channels will be
Use ▲▼ to select Add channels, then press OK.
Use the NUMBER buttons to enter the number of the channel you
want to add, then press OK.
Picture
Sound
Setup
Features
Language
USB
Add channels
For analog channels, select a
channel to be added using
number keys.
For digital channels, you must
perform Autoprogram function.

canceled.
•• Even if Autoprogram is completed, the channel setting will be lost if the AC power
cord is unplugged before the unit goes into Standby mode by pressing
Ch Change
.
Back
•• The PIN Code will be required once you set a PIN code in the Child and ratings lock.
➠ p. 23
•• If you want to change your PIN code, follow the instruction of Change PIN. ➠ p. 25
Note
•• If setup completes successfully, Added to the channel list. is displayed.
•• If external Input is used, it is not possible to register the channel and Unavailable will be
displayed on the TV screen.
Channel list
•• Some channels cannot be selected by CH + / −. Use the NUMBER buttons to select
the memorised channels.
The channels selected here can be skipped when selecting the channels
using CH + / −.
Those channels can still be selected with the NUMBER buttons.
1
2
Use ▲▼ to select Channel list, then press OK.
Use ▲▼ to select the channel you want to remove, then press
OK.
Picture
Sound
Setup
Features
Language
USB
Highlight channels for
Ch Up / Down key selection.
Ch Select
Watch / Skip
DTV
DTV
DTV
11.1
11.2
11.3
Back
• The channel display for the removed channel darkens. You will
not be able to select the channel again using CH + / −.
• To reactivate a removed channel, use ▲▼ and press OK. The
registered channels are highlighted.
• When you remove a main channel, its subchannels are removed
as well.
Note
•• The channel with DTV indicated on the display is ATSC. Otherwise the channel is
Analog TV.
Antenna confirmation
Digital TV operation
This function lets you check the Digital signal strength of each channel.
1
2
Use ▲▼ to select Antenna, then press OK.
Use the NUMBER buttons or CH + / − to select the channel for
which you want to check the Digital signal strength.
Picture
Sound
Setup
Features
Language
USB
Back
Current
50 Max
50
Ch Change
Note
•• If the channel is set to Analog channel or external Input, you cannot confirm the
antenna condition.
English
22
Analog/Cable TV operation
Features
1
Press MENU and use ▲▼ to select Features, then press OK.
Picture
Sound
Setup
Features
Language
USB
2
Caption settings
Child lock
PC settings
fun-Link (HDMI CEC)
Location
E-sticker
Software upgrade
Caption service
Home
--
Adjust the following items.
Off
Select if you do not want caption service.
CC-1
and
T-1
The primary caption and text services. The
captioning or text is displayed in the same
language as the program’s dialog (up to 4
lines of script on the TV screen).
CC-3
and
T-3
Rarely available and broadcasters use them
only in special conditions, such as when CC-1
and CC-3 or T-1 and T-3 are not available.
•There are 3 display modes according to
programs:
CC-2,
CC-4,
T-2
and
T-4
2
Pop-on
Once characters are stored in
memory, they are displayed all
at once.
Roll-up
Displays the characters
continuously by scrolling (max.
4 lines).
Font style
Closed Captioning displays the audio portion of programming as text
superimposed over the video.
Font
Use ▲▼ to select Caption settings, then press OK.
Picture
Sound
Setup
Features
Language
USB
Displays Input characters on the
TV screen immediately.
You can choose the size, font, color, background and other
characteristics of the caption text.
Caption settings
1
Paint-on
Caption service
Digital caption service
Caption style
Font size
Font color
Font opacity
Caption style
Off
Off
Background
Edge
Closed Captioning font
style, size, color and
transparency can be
changed.
Background Background color and
color
transparency of the
Background displayed caption can be
switched.
opacity
Edge color
Edge type
Edge color and type of
the displayed caption can
be switched.
Picture display
S o, you must be Philip. H i!
I’m pleased to meet yo
u.
you.
Use ▲▼◄► to select the item you want to adjust, then press
OK.
Font
Edge
Digital TV operation
(Edge color and Edge type)
In addition to the basic Closed Caption, DTV has its own Closed
Caption called Digital caption service. Use this menu to change the
settings for Digital caption service.
Off
Digital caption service
CS-1 to
CS-6
(Font style, Font size, Font color and Font opacity)
Background
(Background color and Background opacity)
Selects if you do not want Digital
caption service.
Selects one of these before changing
any other item in Caption settings
menu. Choose CS-1 under normal
circumstances.
• Review your setting choice made below by looking in the upper
right corner of the displayed setting box (not all selections show
the differences selected).
Continued on next page.
English
23
Note
Picture
Sound
Setup
Features
Language
USB
• Digital caption service that you can switch differs depending on the broadcast
description.
• Caption style will not effect if the User setting is set to Off.
• Closed Captioning service may not be controlled by this unit’s menu options if you are
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
watching television through an external cable or satellite set-top box. In which case
you will need to use the menu options on the external set-top box to control Closed
Captioning.
The captions do not always use correct spelling and grammar.
Not all TV programs and product commercials include Closed Caption information.
Refer to your area TV program listings for the TV channels and times of Closed Caption
shows. The captioned programs are usually noted in the TV listings with service marks
such as CC.
Not all captioning services are used by a TV channel during the transmission of a
Closed Caption program.
Closed Caption will NOT be displayed when you are using an HDMI connection.
To show the Closed Caption on your TV screen, broadcast signal must contain the
Closed Caption data.
Not all TV programs and commercials have the Closed Caption or all types of the
Closed Caption.
Captions and texts may not exactly match the TV voice.
Changing channels may delay the Closed Caption for a few seconds.
Adjusting or muting the volume may delay the Closed Caption for a few seconds.
Abbreviations, symbols and other grammatical shortcuts may be used in order to keep
pace with the on-screen action. This is not a malfunction.
The caption or text characters will not be displayed while the main menu or functions
display is shown.
If a black box appears on the TV screen, this means that the Closed Caption is set to
the text mode. To clear the box, select CC-1, CC-2, CC-3, CC-4 or Off.
If the unit receives poor quality television signals, the captions may contain errors or
there might be no captions at all. Some possible causes of poor quality signals are:
- Automobile ignition noise
- Electric motor noise
- Weak signal reception
- Multiplex signal reception (ghosts or screen flutter)
- Data dropout and Pixelation (for DTV only)
The unit retains the Closed Caption setting if the power fails.
When the unit receives special effects playback signal (e.g. Search, Slow and Still) from a
VCR’s video Output channel (ch3 or ch4), the unit may not display the correct caption
or text.
The EUT setting that satisfies § 79.102 (e) is as follows:
Font: Mono-font
Character size: Large
Child and ratings lock
You can prevent your children from watching certain programs or
certain channels by locking the TV controls and by using ratings.
1
Use ▲▼ to select Child lock, then press OK.
Picture
Sound
Setup
Features
Language
USB
2
Caption settings
Child lock
PC settings
fun-Link (HDMI CEC)
Location
E-sticker
Software upgrade
Home
--
Use the NUMBER buttons to enter the 4-digit numbers for your
PIN code.
• When you have not set up your PIN code, enter 0, 0, 0, 0.
• When the PIN code is correct, Child lock menu is displayed.
See the following description for setting each item.
Channel lock
US movie ratings lock
US TV ratings lock
Canadian English rating
Canadian French rating
Region ratings lock
Clear region ratings lock
Change PIN
Note
• When you select a rating and set it to
•
•
•
•
•
•
or , the higher ratings will be blocked
automatically. The lower ratings will be available for viewing.
When you set the highest rating to , all ratings turn to automatically.
To block any inappropriate programs, set your limits in US movie ratings lock,
US TV ratings lock and Region ratings lock.
The child lock setting will be retained after a power failure or after the power is
removed for longer than 10 seconds (except the PIN code reverts to 0000).
Child and ratings lock ➠ p.23
Region ratings lock and Clear region ratings lock will be available when the unit
receives a Digital broadcast using the new rating system.
For the United States, the unit may download the Region Ratings Lock Table, if required.
The Canadian rating systems on this unit are based on CEA-766-A and CRTC policy.
Channel lock
Particular channels or external Input modes can be invisible in this
function.
3
4
Use ▲▼ to select Channel lock, then press OK.
Use ▲▼ to select the particular channels or external Input, then
press OK repeatedly to switch between view and block.
•
indicates that the channel or Input Source is locked.
•
indicates that the channel or Input Source is not locked.
Picture
Sound
Setup
Features
Language
USB
HDMI1
HDMI2
HDMI3
Video
PC
40.1
DTV
40.2
DTV
English
24
Setting US movie and TV ratings
US movie ratings lock is the rating system created by MPAA.
US TV ratings lock has controlled access to individual programs based
on their age ratings and content rating.
3
Use ▲▼ to select US movie ratings lock or US TV ratings lock,
then press OK.
4 Use ▲▼ to select the desired rating, then press OK repeatedly to
switch between view and block.
• For US TV ratings, you can further set the sub ratings to block
specific elements of programming.
•
or indicates that the rating is locked.
•
indicates that the rating is not locked.
US movie ratings lock
To set the sub ratings
As for TV-Y7, TV-PG, TV-14 or TV-MA, you can further set the sub
ratings to block specific elements of programming. To set the sub ratings,
follow the step below.
Use ▲▼ ◄► to select the desired rating, then press OK repeatedly
to switch between and .
Picture
Sound
Setup
Features
Language
USB
All
(FV) Fantasy Violence
None
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
Picture
Sound
Setup
Features
Language
USB
TV-MA
All
NR
G
US TV ratings
PG
PG-13
R
NC-17
TV-Y7
(FV) Fantasy Violence
TV-PG
(D) Dialog
(L) Language
(S) Sex
(V) Violence
TV-14
X
TV-MA
US TV ratings lock
•• Blocked sub rating will appear beside the main rating category in US TV ratings lock
All
menu.
•• You cannot block a sub rating if the main rating is set to .
•• Changing the category to or automatically changes all its sub ratings to the same
None
(
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
US TV ratings Description
All
NR
(L) Language
(S) Sex
(V) Violence
Note
Picture
Sound
Setup
Features
Language
USB
US movie
ratings
Sub Rating
All ratings locked including no rating
None
No rating
−
TV-Y
Appropriate for all children
−
TV-Y7
Appropriate for all children 7 and older
G
TV-G
General audience
PG
TV-PG
Parental guidance suggested
PG-13
−
Unsuitable for children under 13
−
TV-14
Unsuitable for children under 14
R
−
Restricted under 17 requires accompanying
parent or adult guardian
NC-17
−
No one under 17 admitted
X
TV-MA
Mature audience only
or
).
English
25
Canadian English or Canadian French ratings
You can select the rating for Canadian English or Canadian French
broadcasting.
3
Use ▲▼ to select Canadian English rating or
Canadian French rating, then press OK.
4 Use ▲▼ to select the desired rating, then press OK repeatedly to
switch between view and block.
•
indicates that the rating is locked.
•
indicates that the rating is not locked.
Canadian
English rating
Canadian
Description
French rating
All
Locked all ratings
E
Exempt program
C
C8+
−
For all children
−
For children over 8
G
This function lets you adjust the PC screen position, clock and phase
during PC Input.
Use ◄► to adjust Clock setting to stabilize the PC screen and Phase
setting to improve the clarity of the PC screen.
1
Use ▲▼ to select PC settings, then press OK.
Picture
Sound
Setup
Features
Language
USB
Auto adjustment
Horizontal position
Vertical position
Clock
Phase
−
8ans+
Unsuitable for ages under 8
PG
−
Parental guidance suggested
−
13ans+
Unsuitable for ages under 13
14+
−
Unsuitable for ages under 14
−
16ans+
Unsuitable for ages under 16
18+
18ans+
Adult audience only
2
Use ▲▼ to select the item you want to adjust, then press OK.
• The horizontal/vertical position, clock and phase of the PC
screen are automatically adjusted.
Auto adjustment
Select if you want to adjust automatically.
Cursor ◄
Horizontal position to move PC screen left
•• The V-Chip can block non rated programs as per “CEA-608-E sec. L.3”. If the option to
block NR, None or E programs is used in US movie ratings lock, US TV ratings lock,
Canadian English rating or Canadian French rating accordingly “unusual results
may occur and the unit may not receive emergency bulletins or other types of
programming:” / Emergency Bulletins (Such as EAS messages, weather warnings
and others) / Locally originated programming / News / Political / Public Service
Announcements / Religious / Sports / Weather.
Vertical position
Clock
Phase
Cursor ►
to move PC screen right
to move PC screen down to move PC screen up
to decrease setting value
to increase setting value
Note
•• You may not obtain an appropriate screen with Auto adjustment for some signals. In
Change PIN
this case, adjust the settings manually.
•• Adjust Phase setting after Clock setting has been properly adjusted.
Although the default PIN code (0000) is supplied with the unit, you can
set your own PIN code.
Use ▲▼ to select Change PIN, then press OK.
Press the NUMBER buttons to enter the new 4-digit PIN code.
• Enter PIN code again in Confirm PIN. entry field.
Picture
Sound
Setup
Features
Language
USB
0
0
0
0
General audience
Note
3
4
PC settings
Enter PIN.
-
Confirm PIN.
-
PIN Code
Back
Note
•• Make sure new PIN code and confirm PIN code must be exactly the same. If they are
different, the space is cleared for reentering.
•• Your PIN code will be erased and returns to the default PIN code (0000) when a
power failure occurs.
•• If you forget the PIN code, unplug the AC power cord then wait for 10 seconds to plug
the AC power cord in again.
The unit will restore the PIN code to 0000 as the factory default.
English
26
Device list
fun-Link (HDMI CEC)
This function allows you to operate the linked functions between our
brand devices with a fun-Link feature and this unit connecting through
an HDMI cable. You must connect this unit to our brand fun-Link
devices and be sure its fun-Link (HDMI CEC) setting is also set to On.
1
Use ▲▼ to select fun-Link (HDMI CEC), then press OK.
Picture
Sound
Setup
Features
Language
USB
fun-Link control
Auto device off
Auto TV on
Device control
Device list
On
On
On
On
This function lets you see the product model number or name of
connected devices.
Use ▲▼ to select the desired fun-Link devices listed on the TV screen,
then press OK.
Your connected fun-Link device will be Turned On if the device is in
Stand by mode.
Picture
Sound
Setup
Features
Language
USB
HDMI1
DVD recorder
HDMI2
Blu-ray disc player
HDMI3
Home theater system
Input Change
2
Use ▲▼◄► to select the item you want to adjust, then press
OK.
Set the fun-Link control On or Off. The following additional settings will
be grayed out when you set to Off.
fun-Link control
Off
Disables all fun-Link.
On
Selects if you have connected an
external device that is compatible with
the fun-Link function.
You can set your device to Turn Off by interlocking from this unit’s
power.
Auto device off
Off
Your connected fun-Link device stays on
even if the unit goes into Standby mode.
On
Your connected fun-Link device Turns
Off automatically when the unit goes
into Standby mode.
This unit will Turn On when the Power On signal is sent from your
connected fun-Link device.
Off
This unit stays in Standby mode even if
you Turn On your connected fun-Link
device.
On
This unit Turns on automatically when
you Turn On your connected fun-Link
device.
Auto TV on
You can operate some functions such as disc playback or call up the
menu of the connected devices, by using this unit’s remote control.
Device control
Off
Disables the device control.
On
PLAY B / STOP C / FWD D / REV E / SKIP G /SKIP H / PAUSE F / LINK / ▲▼◄► / OK / BACK / the NUMBER buttons / RED / GREEN / BLUE / YELLOW can be used to control
your connected fun-Link devices by this
unit’s remote control.
Refresh
Back
English
27
Setting your location to home
Language
You can set the location of your TV to Home or Retail. Choosing Home
gives you full flexibility to change predefined settings for picture and sound.
1
Use ▲▼ to select Location, then press OK.
Picture
Sound
Setup
Features
Language
USB
2
Caption settings
Child lock
PC settings
fun-Link (HDMI CEC)
Location
E-sticker
Software upgrade
Home
--
Use ▲▼ to select Home or Retail, then press OK.
Retail
The unit will be set up with predefined settings for retail
displays. In this setting, you can set the backlight brighter. Home
The unit is set to maximize the energy efficiency for home
setting and it can be adjusted through a choice of picture
and sound quality according to your preference.
•• You must set Home. Otherwise, personalized picture and sound settings will not be
memorized after the unit goes into Standby mode.
E-sticker
When you set Location to Retail store, E-sticker (Electronic Sticker) is
displayed. E-sticker can be Turned Off using procedure below.
Use ▲▼ to select E-sticker, then press OK.
Use ▲▼ to select Off, then press OK.
Off
You can Turn Off E-sticker.
Top
E-sticker is displayed on top of the TV screen.
Bottom
E-sticker is displayed on bottom of the TV screen.
Note
•• If you select Home, E-sticker will not be displayed.
Press MENU and use ▲▼ to select Language, then press OK.
Picture
Sound
Setup
Features
Language
USB
Select your menu language.
English
Seleccione el idioma para el menú.
Español
Sélectionnez la langue du menu.
Français
2
Note
1
2
1
Use ▲▼ to select English, Español or Français, then press OK.
Note
•• If you need the English menu instead of the Spanish or French menu’s, press MENU.
Use ▲▼ to select Idioma or Langue, then press OK.
Use ▲▼ to select English then press OK.
Press MENU to exit the main menu.
English
28
Picture (JPEG)
USB
1
Use ▲▼ to select the desired file, then press OK.
Your TV is fitted with a USB connection that enables you to view
photos or watch Motion JPEG files stored on a USB Memory Stick.
Your USB
1
..
Image1.jpg
Image2.jpg
Image3.jpg
Image4.jpg
Image5.jpg
Connect the USB Memory Stick to the USB terminal on the side of
your TV.
2 Press MENU and use ▲▼ to select USB, then press OK.
• The highlighted text will move to the name of your USB
Memory Stick, then press OK again.
\
Picture
Sound
Setup
Features
Language
USB
Picture Picture
Image1.jpg
Picture
Image1.jpg
1200:900
2009:04:02 17:42:06
Your USB
This menu allows you to enjoy
your pictures and videos via
your USB device.
1
2 Thumbnails
3
4
Press “OK” key to play/pause
• To toggle between List and Thumbnails press
the NUMBER 2 button each time.
• The unit goes to the Slide show automatically.
To pause / play the Slide show, press OK.
• Use the NUMBER buttons (1 through 4) to see the file detail
( 1 ) or change the following settings ( 2 ~ 4 ).
See the description on the top of the next column.
3
Item
Use ▲▼ to select the Picture or Video, then press OK.
• The files recorded under the following specifications are
required.
1
More Detail
4
Picture (JPEG) Upper limit 24Mpixel
Size
Start show
320 x 240 (QVGA)
Frame rate 30fps
Video
(Motion JPEG)
Audio type
Transitions
Note
••
••
••
••
3
Press 3, then use ▲▼ to change the display time
choosing from; Short, Medium and Long.
4
Press 4 or OK to stop the Slide show.
While the Slide show is Off, the following 2 settings will be
displayed.
2
Every press on 2 will turn the picture clockwise by 90
degrees.
3
Press 3, then use ▲▼ to select the zoom factor (1x, 2x
or 4x). Press OK to set the zoom factor.
Slide time
•• Up to 2GB (FAT16) or 8GB (FAT32) capacity can be supported.
•• Up to 10,000 files or 1,000 folders with 19 hierarchies can be recognized.
•• Up to 255 English characters can be recognized.
•• This unit does not support MTP(Media Transfer Protocol).
•• This unit supports FAT16 and FAT32 file systems.
•• If the file is not supported, an error message appears.
•• When the USB Memory Stick is not recognized, try reconnecting it again.
•• We cannot be held responsible if your USB Memory Stick is not supported, nor will we
accept any liability for damage or loss of stored data.
A file name exceeding 128 characters or contains a dot character is not supported on
this TV.
Progressive JPEG files are not supported.
Only a Motion JPEG file with an “.avi” extension is supported. An extension “.mov” is
not supported.
During Motion JPEG playback, “Pause”, “Forward” and “Reverse” do not work on this
unit.
Press 2, then use ▲▼ to select the transition mode
choosing from;
None, Dissolve, Wipe right, Wipe left, Wipe up,
Wipe down, Box in and Box out.
2
Sampling frequency
LPCM (32 kHz, 44.1 kHz or 48 kHz)
Quantization bit rate (16 bit)
Detail
Press 1 to display file details below.
Name, Album, Date, Size and Next.
Press 1 again to remove file details.
Press 4 or OK to start the Slide show.
While the Slide show is on, the following 2 settings will be
displayed.
Stop show
Rotate
Zoom
Video (Motion JPEG)
1
Use ▲▼ to select the desired file, then press OK.
Your USB
Video Video
MOVIE1.avi
Video
Title:
Director:
Date:
Duration:
..
MOVIE1.avi
MOVIE2.avi
MOVIE3.avi
MOVIE4.avi
MOVIE5.avi
1
2
MOVIE1.avi
2009/04/02
00:06:37
3
Supported format: motion jpeg, 320 x 240, 30FPS
• To stop playback and return to the file list, press
BACK, OK or CH +.
• Press CH − to play back from the beginning.
Item
1
More Detail
Detail
Press 1 to display file details below.
Title, Director, Date and Duration.
Press 1 again to remove file details.
4
English
29
6 Upgrade your TV software
Magnavox continuously tries to improve its products and we strongly
recommend that you upgrade the TV software when upgrades are
available.
New software can be downloaded from our website at
www.magnavox.com/support/download_list.php
using the model number of your TV to find information.
Checking your current software version
1 Press MENU and use ▲▼ to select Features, then press OK.
2 Use ▲▼ to select Software upgrade, then press OK.
Picture
Sound
Setup
Features
Language
USB
3
Current software info
Upgrade
Warning
•• When the software upgrade is running, don’t press any buttons.
•• Do not remove the USB Memory Stick during the software upgrade.
•• If an error occurs during the upgrade, retry the procedure or for further assistance,
please contact Call Center.
Downloading the software
Find information and software related to your TV and download the
latest software upgrade file to your PC.
1
On your PC, open a web browser and go to
www.magnavox.com/support/download_list.php
2 Enter the model number in the “Type the Model Number...” field.
3 Click the desired software to be downloaded.
• Decompress the ZIP-file.
4 Copy the upgrade file to the root directory of the USB Memory
Stick.
Starting the software upgrade
1
Connect your USB Memory Stick with the upgrade file to the USB
terminal on the side of your TV.
Use ▲▼ to select Current software info, then press OK.
• The version and a description of the current software is
displayed.
Picture
Sound
Setup
Features
Language
USB
Back
Release Version:
XXXXXXX_XX_XX_XXXX_XX
Upgrading the software
You can upgrade the software by using USB Memory Stick.
Preparing for the software upgrade
2
3
4
5
Press MENU and use ▲▼ to select Features, then press OK.
Use ▲▼ to select Software upgrade, then press OK.
Use ▲▼ to select Upgrade, then press OK.
Read the on-screen instructions and confirm that you want to
continue with the installation.
Picture
Sound
Setup
Features
Language
USB
Start now
Would you like to upgrade the software?
You require the following equipment :
•
•
•
A PC with web browsing capability.
An archive utility that supports the ZIP-format (e.g. WinZip for Windows or StuffIt for Mac OS).
An empty clean formatted USB Memory Stick.
Note
•• Only FAT / DOS-formatted portable memory is supported.
•• Use only software upgrades that can be found on the Magnavox web site.
6
When the software upgrade is completed, press to set the unit
to go into Standby mode, then remove the USB Memory Stick and
then press again to Turn the unit On.
• The TV starts up with the new software.
For further assistance, please contact Call Center.
English
30
7 Connecting devices
No supplied cables are used with these connections:
•• Please purchase the necessary cables at your local store.
Before you connect AC power cord:
Be sure other devices are connected properly before plugging in the AC
power cord.
Connecting your devices
HDMI Digital connection
HDMI connection offers the highest picture quality.
HDMI (High-Definition Multimedia Interface) transports high definition
Digital video and multi-channel Digital Audio through a single cable.
set-top box
or
Selecting your connection quality
IN
HDMI - Highest quality
OUT
HDMI cable
Blu-ray disc player
or
HD game console
HDMI-DVI connection
Supports high-definition Digital signals and gives highest picture and
sound quality. Video and audio signals are combined in one cable.
You must use HDMI for full high-definition video and to enable
fun-Link (HDMI CEC).
This unit can be connected to your device that has a DVI terminal.
Use an HDMI-DVI conversion cable for this connection and it requires
audio cable for Analog Audio signal as well.
Note
•• Magnavox HDMI supports HDCP (High-bandwidth Digital Contents Protection).
HDCP is a form of Digital Rights Management that protects high definition content in
Blu-ray discs or DVDs.
IN
OUT
cable receiver or
satellite box with the
DVI Output jack
HDMI-DVI
conversion cable
Component (Y Pb Pr) - High quality
IN
OUT
Audio (L/R) cables
Note
•• Use an HDMI cable with the HDMI logo (a certified HDMI cable). High Speed HDMI
Supports high-definition Analog signals but gives lower picture quality than
HDMI. Component (Y/Pb/Pr) Video cables combine red / green / blue
video cables with red / white audio (L/R) cables. Match the cable colors
when you connect to the TV.
Composite - Basic quality
For analog connections. Composite Video / Audio Analog cable usually
combine a yellow video cable with red / white audio (L/R) cables. With
this unit, yellow cable must be connected to Y (green) of Component
Video Input jacks.
cable is recommended for the better compatibility.
For HDMI connection
•• The unit accepts 480i / 480p / 720p / 1080i, 1080p 24/30/60Hz of video signals, 32kHz
/ 44.1kHz and 48kHz of audio signals.
•• This unit accepts 5.1 channel audio signal (Dolby Digital) and 2 channel audio signal
(LPCM).
•• This unit accepts only signals in compliance with EIA861.
For HDMI-DVI connection
•• The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.
•• HDMI-DVI connection requires separate audio connections as well and the audio
signals are output as Analog (L/R) Audio.
•• DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.
English
31
Component Analog Video Connection
Digital Audio Output Connection
Component Analog Video connection offers better picture quality for
video devices connected to the unit.
If you connect to the unit’s Component Video (Y/Pb/Pr) Input jacks,
connect Analog Audio cables to the Analog Audio (L/R) Input jacks.
If you connect this unit to an external Digital Audio device, you can
enjoy multi-channel audio like 5.1ch Digital broadcasting sound.
Use a Digital Audio coaxial cable to connect the unit to external Digital
Audio devices.
OUT
IN
set-top box
Audio (L/R) cables
or
IN
OUT
IN
Blu-ray disc/DVD recorder
Component (Y/Pb/Pr) Video cables
Note
•• The unit accepts 480i / 480p / 720p and 1080i of video signals for this connection.
Composite Analog Video Connection
Composite Analog Video connection offers standard picture quality for
video devices connected to the unit.
If you connect to the unit’s Composite Video (Y/VIDEO) Input jack,
connect audio cables to the Audio (L/R) Input jacks. When the Audio is
monaural, then only connect to the Audio L Input jack.
OUT
DVD player
Audio (L/R) + Video cables
IN
Note
•• With this unit, yellow cable must be connected to Y (green) of Component Video Input
jacks.
•• Whenever you connect to the Composite Video Input jack (Y/VIDEO), you must
disconnect the Component Video Input jacks (Pb and Pr). If you leave those jacks
connected, it may cause of unstable picture.
•• Only the left loudspeaker reproduces sound for mono equipment. Use a mono to
stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.
OUT
Digital Audio coaxial cable
Digital home theater
amplifier
English
32
The following video signals can be displayed:
PC connection
Format
HDMI connection
This unit can be connected to your PC that has a HDMI terminal. Use
an HDMI cable for this Digital connection.
VGA
SVGA
800 x 600
XGA
1,024 x 768
1,280 x 768
1,360 x 768
1,920 x 1,080
WXGA
FHD
IN
Refresh rate
640 x 480
60Hz
Other formats or non-standard signals will not be displayed correctly.
OUT
HDMI cable
Resolution
PC
Note
•• Please purchase the VGA cable or HDMI-DVI conversion cable that has a ferrite core.
•• The following operations may reduce noise.
••
HDMI-DVI connection
This unit can be connected to your PC that has a DVI terminal. Use
an HDMI-DVI conversion cable for this Video Digital connection and it
requires Stereo mini 3.5mm plug Audio cable for Analog Audio signal as
well.
••
••
••
- Attach a ferrite core to the AC power cord of your PC.
- Unplug the AC power cord and use the built-in battery of your PC.
Use an HDMI cable with the HDMI logo (a certified HDMI cable). High Speed HDMI
cable is recommended for the better compatibility.
The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.
HDMI-DVI connection requires separate audio connections as well and the audio
signals are output as Analog (L/R) Audio.
DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.
USB Memory Stick
This unit offers easy playback of picture (JPEG) and video
(Motion JPEG) files.
Insert the USB Memory Stick into the USB terminal shown below.
USB ➠ p. 28
IN
OUT
HDMI-DVI
conversion cable
IN
PC
OUT
Stereo mini 3.5 mm plug Audio cable
VGA connection
This unit is equipped with a PC Input jack. If you connect this unit to
your PC, you can use this unit as a PC monitor.
Use a VGA cable for this Video connection and it requires a Stereo mini
3.5mm plug Audio cable for Analog Audio signal as well.
Note
•• The unit recognizes only a USB Memory Stick.
•• Do not use a USB hub or an extension cable to connect an external hard disk drive to
IN
VGA cable
the unit. (Not supported.)
•• A USB Memory Stick is always inserted to this unit directly.
•• A USB Memory Stick is not supplied with this unit.
•• We do not guarantee that all USB Memory Sticks can be supported by this unit.
•• Be sure to keep a backup copy of the original files on your device before you play them
OUT
PC
OUT
IN
back on this unit. We have no responsibilities for damage or loss of your stored data.
•• To protect your USB Memory Stick files from being erased place the write protect
sliding tab in the protect position.
Stereo mini 3.5 mm plug Audio cable
•• When you are ready to remove a USB Memory Stick, set the unit to go into Standby
mode to avoid any damage to your data and the unit.
•• A USB Memory Stick that requires its own driver or the device with a special system
such as fingerprint recognition are not supported.
•• This unit is not allowed to use the USB Memory Stick which requires an external
power supply (500mA or more).
English
33
8 Useful tips
FAQ
Question
My remote control does not
work.
What should I do?
Answer
•• Check the antenna or cable connection to the main unit.
•• Check the batteries of the remote control.
•• Check if there is an obstacle between the infrared sensor window and the remote control.
•• Test the signal Output use IR Signal Check. ➠ p. 35
If okay, then possible infrared sensor trouble.
•• Aim the remote control directly at the infrared sensor window on the front of the unit.
•• Reduce the distance to the unit.
•• Re-insert the batteries with their polarities (+/– ) as indicated.
•• When there is an infrared-equipped device such as PC near this unit, it may interrupt the remote control signal of this unit. Move
the infrared-equipped device away from this unit, change the angle of the infrared sensor or Turn Off the infrared communication
function.
How come the Initial setup
appears every time I Turn On
this unit?
•• Connect the RF coaxial cable to the unit directly and run the initial setup.
•• Make sure to complete the initial setup before the unit goes into Standby mode.
Why can I not watch some RF
signal TV programs.
•• Autoprogram must be completed when you set up the unit for the first time or move it to a location where previously unavailable
channels are broadcast.
•• Make sure Autoprogram has been completed. ➠ p. 20
•• The selected channel may not be broadcasting.
•• When Autoprogram is interrupted and not completed, some channels will not be received. Make sure to complete the
Autoprogram. ➠ p. 20
•• The selected channel cannot be viewed by the Child and ratings lock setting. ➠ p. 23
•• The unit requires some kind of antenna Input. An indoor antenna (Digital or VHF / UHF), an external antenna (Digital or VHF / UHF)
or an RF coaxial cable from your wall cable/satellite box needs to be plugged into the unit.
How come there is no image
from the connected external
devices?
•• Check if the correct Input mode is selected by pressing SOURCE or using CH + / −. Refer to Watching channels from an external
device. ➠ p. 15
•• Check the antenna, cable or other Input connection to the unit.
•• When using the Component Video connection check that the Green (Y), Blue (Pb/Cb) and Red (Pr/Cr) connectors are connected
to their corresponding colored jacks on the unit.
When I enter a channel number,
it changes automatically.
•• Many Digital channels have alternate channel numbers. The unit changes the numbers automatically to the ones signifying the
broadcasting station channel number. These basic numbers used for previous Analog broadcasts. (e.g., Input ch# 30 automatically
changes to ch# 6.1)
Why are captions not displayed
entirely? Or, captions are
delayed behind the dialog.
•• Captions that are delayed a few seconds behind the actual dialog are common for live broadcasts. Most captioning production
companies can display a dialog to maximum of 220 words per minute. If a dialog exceeds that rate, selective editing is used to
insure that the captions remain up-to date with the current TV screen dialog.
How can I set the clock ?
•• There is no clock function on this unit.
I cannot change the Child lock
setting because my PIN code no
longer works.
•• If a Power failure occurs for longer than 10 seconds the child lock setting is retained, but the PIN code is reset to the default code
0000. Refer to Child and ratings lock. ➠ p. 23
Troubleshooting
If the unit does not perform properly when operated as instructed in this Owner’s Manual,
check the following chart and all connections once before calling for service.
Symptom
Remedy
No power
•• Make sure the AC power cord is plugged in.
•• Make sure that the AC outlet supplies the proper voltage, plug another electrical appliance into the AC outlet to ensure that the AC
outlet operates normally.
•• If a power failure occurs, unplug the AC power cord for 1 minute to allow the unit to reset itself.
Control buttons do not work.
•• Press only one button at a time. Do NOT press more than one button at the same time.
•• Ensure that no buttons on the remote control are depressed and move freely.
Continued on next page.
English
34
Symptom
Remedy
Power is ON but no screen
image.
•• Check whether the connection of the antenna, cable receiver or satellite box is connected correctly.
•• Check whether all the cables to the unit are connected to the correct Output jack of your device like Blu-ray disc / DVD recorder.
•• Make sure that the selected Input mode is connected to the working Input jack.
•• Check if your computer is NOT in sleep mode when the Input mode of this unit is in PC mode. Tap any key on the keyboard to
wake up your computer.
No picture or sound
•• Check if the Power is on.
•• Check whether all the cables to the unit are connected to the correct Output jack of your device like Blu-ray / DVD recorder.
•• View other TV channels. The problem might be limited to the broadcasting station or weak signal strength.
•• Unplug the AC power cord and wait for about 1 minute, then plug the AC power cord and Turn On the unit again.
•• Check whether the connection of the antenna, cable receiver or satellite box is connected correctly.
•• Make sure that the selected Input mode is connected to the working Input jack.
•• Check if your computer is NOT in sleep mode when the Input mode of this unit is in PC mode. Tap any key on the keyboard to
wake up your computer.
so that the volume bar and current volume level will appear on the TV screen.
•• Make sure that the sound is not muted. Press
. If so, use VOL + / − to adjust to the desired volume.
•• Make sure that the volume is NOT set to 0 or
No color
•• View other TV channels. The problem might be limited to the broadcasting station or weak signal strength.
•• Adjust Color in Picture settings. ➠ p. 19
No sound, distorted sound or
incorrect Audio Sound is heard
when using the HDMI-DVI
connections.
•• Make sure that the Analog Audio signals from the HDMI-DVI device are connected to the Analog Audio (L/R) Input jacks.
•• When using Component Analog Video, Composite Analog Video or PC VGA Video make sure that the Analog Audio (L/R)
connectors are mounted into the Audio (L/R) Input jacks.
Adjusted Picture or Sound
settings are not effective every
time the unit is Turned On.
•• You must set Home in Location. ➠ p. 27
Otherwise, the settings you adjusted will not be memorized after the unit goes into Standby mode.
Sound OK, picture poor
•• Electrical interference from nearby appliances may affect picture quality.
•• Adjust Contrast and Brightness in Picture settings. ➠ p. 19
•• View other TV channels. The problem might be limited to the broadcasting station or weak signal strength.
•• For the best picture quality, watch High Definition wide screen programs.
If the HD content is not available, watch Standard Definition programs instead.
Picture OK, sound poor
•• View other TV channels. The problem might be limited to the broadcasting station or weak signal strength.
•• Check if the audio cable is connected into the unit correctly.
You see a distorted picture or
hear an unusual sound.
•• You may be getting interference from electrical appliances, automobiles, motorcycles or fluorescent lights.
•• Try moving the unit to another location to see if this is the cause of the problem.
Ghosts, lines or streaks in picture
•• Electrical interference from nearby appliances may affect picture quality.
•• View other TV channels. The problem might be limited to the broadcasting station or weak signal strength.
You see noise or trash on the
screen.
•• When the capabilities of the unit exceed the capabilities of the Digital broadcasting, the signal will be increased to match the
capabilities of the display of the unit. This may cause noise or trash.
Different color marks on the TV
screen
•• View other TV channels. The problem might be limited to the broadcasting station, missing data or pixelation.
You switch to a different Input
and the volume changes.
•• This unit will memorize the volume level from the last time you adjusted it.
•• If the volume of the sound from another device is higher or lower, then the loudness will change.
•• Make sure Auto volume leveling is set to On. ➠ p. 20
You switch to a different Input
and the screen size changes.
•• This unit will memorize the viewing mode from the last time you used the particular Input modes.
The display image does not
cover the entire screen.
•• If you are using the unit as a PC monitor, make sure that Horizontal position and Vertical position in PC settings are set correctly.
•• If you are watching TV or using the Composite Video, Component Video or HDMI with 480i Input, press FORMAT repeatedly to
switch various screen modes.
Captions are displayed as a white
box. No caption is displayed in
the Closed Caption-supported
program.
•• Interference from buildings or weather conditions may cause captioning to be incomplete if watching Analog TV signals.
•• Broadcasting station may shorten the program to insert advertisements.
•• The Closed Caption decoder cannot read the information of the shortened program.
Black box is displayed on the TV
screen.
•• The text mode is Selected. For caption, select CC-1, CC-2, CC-3, CC-4 or Off.
Note
•• The LCD screen is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a fixed point of blue, green or red.
This is not to be considered a defect in the LCD screen.
•• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual for more details on correct operations.
English
35
9 Information
Glossary
Maintenance
Cabinet Cleaning
Analog TV (NTSC)
Acronym that stands for National Television Systems Committee and the name
of Analog broadcasting standards.
Off the air Analog TV signals are no longer being sent by major broadcasting
stations in the USA.
Aspect ratio
The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other
words, the TV screen is almost square); widescreen models are 16:9 (the TV
screen is almost twice as wide as its height).
CEC (Consumer Electronics Control)
This allows you to operate the linked functions between our brand devices with
CEC feature and this unit. We do not guarantee 100% interoperability with other
brands of CEC compliant devices.
Component Video
This is a video signal format that conveys each of 3 principal colors of light
(red, blue and green) through different signal lines. This allows the viewers to
experience picture colors as original as it is. There are several signal formats,
including Y / Pb / Pr and Y / Cb / Cr.
Dolby Digital
The system developed by Dolby Laboratories to compress Digital sound. It offers
stereo sound (2ch) or multi-channel audio.
DTV (ATSC)
Initialism that stands for Advanced Television Systems Committee and the name
of the Digital broadcasting standards.
E-sticker
E-sticker is showing set features, technical information, etc on this TV set
that is displayed on the TV screen mainly used by TV retailers. Previously the
information was on a printed sticker that was put on the display.
HDMI (High-Definition Multimedia Interface)
Interface that supports all uncompressed, Digital Audio / Video formats including
set-top box, Blu-ray / DVD recorder or Digital television, over a single cable.
HDTV (High Definition TV)
Ultimate Digital format that produces high resolution and high picture quality.
PIN code
A stored 4-digit number that allows access to parental control features.
SAP (Secondary Audio Program)
Second-audio channel delivered separately from main-audio channel. This audio
channel is used as an alternate in bilingual broadcasting.
SDTV (Standard Definition TV)
Standard Digital format that is similar to the Analog TV picture quality.
SRS TruSurround XT®
Creates a truly immersive surround sound experience with rich bass and clear
dialog from only two speakers.
•
•
Wipe the front panel and other exterior surfaces of the unit with
a soft cloth.
Never use a solvent or alcohol. Do not spray insecticide liquid near
the unit. Such chemicals may cause damage and discoloration to
the exposed surfaces.
Panel Cleaning
Wipe the panel of the unit with a soft cloth. Before cleaning the panel,
disconnect the AC power cord.
Servicing
Should your unit become inoperative, do not try to correct the
problem yourself. There are no user serviceable parts inside. Call
our toll free customer support line found on the cover of this
Owner’s Manual to locate an authorized service center.
IR Signal Check
If the remote control is not working properly, you can use a Digital
camera (including a cellular phone with built-in camera) to see if it is
sending out an infrared signal.
With a Digital camera
(including built-in cell phone cameras):
Point the Digital Camera towards the remote control
infrared diode at the front of the remote control.
Press any button on the remote control and look
through the camera display. If the infrared pulsating
light appears through the camera, the remote control
is sending out an IR signal.
English
36
10 Specifications
Model #
50MF412B / 39MF412B
Type
FHD (1920 x 1080 pixels 60Hz)
Aspect ratio
16:9
Viewing angles
176° (V) by 176° (H)
Built-in Digital tuner
ATSC / NTSC
Mono / Stereo
Mono, Stereo, SRS TruSurround XT®
Power Output (RMS watts)
10 W x 2
Equalizer
5 band
Picture
Sound
Ease of use
Picture format
SD (4:3 Source)
HD (16:9 Source)
HDMI AV (4:3 Source)
HDMI AV (16:9 Source)
PC Source
: Normal / 16:9 / Movie expand / Zoom / Wide
: Normal / 4:3 / Movie expand / Zoom / Wide
: Normal / 16:9 / Movie expand / Zoom / Wide / Full
: Normal / 4:3 / Movie expand / Zoom / Wide / Full
: Normal / Full / Unscaled
(Refer to HDMI AV (16:9 Source) above if PC has HDMI Output.)
Photo Slide show
JPEG files only
Video playback
Motion JPEG 320 x 240, 30fps and file extension “.avi” only
Connectivity
Component Video Input (Y/Pb/Pr)
1
supporting video signals : 480i/p, 720p, 1080i 60Hz
Composite Video Input
(shared terminal with Y of components)
1
HDMI Input
3
supporting video signals :
480i/p, 720p, 1080i/p, 24Hz-60Hz
PC-Input signal up to FHD (1920 x 1080)
Audio L/R Input
1
PC Input
via VGA, HDMI and HDMI-DVI + Analog Audio L/R
USB
1
Digital Audio Output
1
supporting Dolby Digital
Headphone Output
1
1/8 inches (3.5mm)
Power requirements
120V~ AC +/− 10%, 60Hz +/− 0.5%
Power
Temperature
Operating temperature
•
Specifications are subject to change without prior notice.
41 °F (5 °C) to 104 °F (40 °C)
English
37
11Warranty
LIMITED WARRANTY
NINETY (90) DAY LABOR / ONE (1) YEAR PARTS
WARRANTY COVERAGE:
This warranty obligation is limited to the terms as set forth
below.
WHO IS COVERED:
This product warranty is issued to the original purchaser or the
person receiving the product as a gift against defects in materials
and workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original
sales receipt showing the product name and the purchase date
from an authorized retailer is considered such proof.
WHAT IS COVERED:
This warranty covers new products if a defect in material or
workmanship occurs and a valid claim is received within the
Warranty Period. At its option, the company will either (1)
repair the product at no charge, using new or refurbished
replacement parts, or (2) exchange the product with a product
that is new or which has been manufactured from new, or serviceable used parts and is at least functionally equivalent or most
comparable to the original product in current inventory, or (3)
refund the original purchase price of the product.
Replacement products or parts provided under this warranty are
covered against defects in materials and workmanship from the
date of the replacement or repair for ninety (90) days or for the
remaining portion of the original product’s warranty, whichever
provides longer coverage for you. When a product or part is
exchanged, any replacement item becomes your property and the
replaced item becomes company property. When a refund is
given, your product becomes company property.
Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) day limited warranty.
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all requirements
can result in delay.
WHAT IS NOT COVERED - EXCLUSIONS AND LIMITATIONS:
This Limited Warranty applies only to new company manufactured products that can be identified by the trademark, trade
name, or logo affixed to it. This Limited Warranty does not apply
to any hardware product or any software, even if packaged or
sold with the product, as manufacturers, suppliers, or publishers
may provide a separate warranty for their own products packaged with the bundled product.
The company is not liable for any damage to or loss of any programs, data, or other information stored on any media contained
within the product, or other additional product or part not covered by this warranty. Recovery or reinstallation of programs,
data or other information is not covered under this Limited
Warranty.
or a part that has been modified without written company permission, or (d) if any serial number has been removed or defaced,
or (e) product, accessories or consumables sold “AS IS” without
warranty of any kind by including refurbished product sold “AS
IS” by some retailers.
This Limited Warranty does not cover:
• Shipping charges to return defective product.
• Labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or
repair of antenna/signal source systems outside of the product.
• Product repair and/or part replacement because of improper
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images or
screen markings resulting from viewing fixed stationary content for extended periods, product cosmetic appearance items
due to normal wear and tear, unauthorized repair or other
cause not within the control of the company.
• Damage or claims for products not being available for use, or
for lost data or lost software.
• Damage from mishandled shipments or transit accidents when
returning product.
• A product that requires modification or adaptation to enable
it to operate in any country other than the country for which
it was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
• A product used for commercial or institutional purposes
(including but not limited to rental purposes).
• Product lost in shipment and no signature verification receipt
can be provided.
• Failure to operate per Owner’s Manual.
TO OBTAIN ASSISTANCE…
Contact the Customer Care Center at:
1 866 341 3738
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CONSUMER, WITH THE ISSUING COMPANY NOT LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON
THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
ON THIS PRODUCT IS LIMITED IN DURATION TO THE
DURATION OF THIS WARRANTY.
Some states do not allow the exclusions or limitation of incidental or consequential damages, or allow limitations on how long an
implied warranty lasts, so the above limitations or exclusions may
not apply to you.
This warranty does not apply (a) to damage caused by accident,
abuse, misuse, neglect, misapplication, or non-supplied product,
(b) to damage caused by service performed by anyone other than
company approved Authorized Service Location, (c) to a product
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
FUNAI CORPORATION, Inc. 19900 Van Ness Avenue, Torrance, CA 90501
English
FUNAI CORPORATION, Inc.
19900 Van Ness Avenue, Torrance, CA 90501
A21U0UD /A21UBUH /A21T0UH