MICRO2+
USER MANUAL
Wintal MICRO2+ USER MANUAL
Contents
BRIEF INTRODUCTION .................................................... 1
FEATURE .................................................................................. 1
BASIC PERFORMANCE ........................................................... 1
PRODUCT DETAILS ......................................................... 2
PACKING LIST .......................................................................... 2
FRONT VIEW ............................................................................ 2
BACK VIEW ............................................................................... 3
REMOTE CONTROL ................................................................. 4
BASIC OPERATION .......................................................... 7
USAGE PREPARING ................................................................ 7
OPERATION OF PRODUCT USAGE ............................... 9
SETUP MENU ......................................................................... 11
PICTURE VIEW MODE ........................................................... 13
MUSIC PLAY MODE ................................................................ 14
MOVIE PLAY MODE ................................................................ 15
SUBTITLE ................................................................................ 16
MAINTENANCE NOTICE ................................................ 19
FAQ .................................................................................. 20
OTHERS .......................................................................... 22
Brief introduction
Feature
This product is a new type of high-definition home video
player, which can play your favorite pictures, audio/videos
files from the built-in external storage device and memory
card including SD (Secure Digital) card, MMC (Multi
Media Card) to a connected audio/video playback device.
With Full-HD 1080P HDMI Output, you can be sure the
Micro2+ will be your player of choice!
Basic performance
Video Format: MKV, AVI, MP4, MPG, FLV, VOB, DAT,
RM/RMVB
Audio Format: MP3, WMA, AAC, APE, OGG, FLAC
Image Format: JPG/BMP/PNG
USB HOST:
Connection USB mass storage device
HDMI:
High Definition Multimedia Interface
1080P output: Full-HD 1080P (1920x1080) output
1
Product details
Packing list
Check the accessories. If there are some missing, please
contact your supplier immediately
Item
Quantity
Media player
1
Power adaptor
1
Remote control
1
AV cable
1
Batteries
2
User’s Manual
1
Front view
Element Definition
Element
Remark
1
USB
supports multiple external USB
HOST
storage devices
2
LED Light
LED light display
2
3
4
IR
Infrared sensor
2-in-1card
Supports SD, MMC
reader
How to use memory cards: The Product has an integrated
multimedia card reader supporting memory cards
including SD, and MMC. Gently insert the memory card
into the reader with the arrow side upward until there is a
“click” sound.
Back View
Element Definition
Element
1
AV
2
3
HDMI
Digital
Coax
DC IN
4
Remark
Outputs composite video
Outputs digital signal via HDMI port
Output option “SPDIF”/”RAW” audio
via coax port
Inputs power
3
Remote control
4
BUTTON
POWER
MUTE
HOME
FUNCTION
Turn on and off in the stand by mode
Turn on or shut audio output
Switch to the main menu.
AUDIO
Switch the audio format output
Zoom in/out.
Press to switch between NTSC, PAL,
480P, 576P, 720P 50HZ, 720P 60HZ,
TV SYSTEM
1080I 50HZ and 1080I 60HZ, 1080P
24HZ , 1080P 50HZ,1080P 60HZ.
ZOOM
SUBTITLE
PLAY
STOP
PAUSE/STEP
RETURN
Press to set the type, colour, the text
encoding format ,size of subtitle, when
playing the video
Press to play media file and to auto play
the picture
End the playback of a media file
Press to pause the playback. Press
continuously for step by step playback
Return to the previous menu
VOL-
Press to decrease the volume
VOL+
Press to increase the volume
REPEAT
Press to set repeat option: sequence,
random, only once, rotate one, rotate all.
5
Press to return to previous file
Press to go to next file
Press shortly to move cursor left
Press shortly to move cursor right
Press shortly to move cursor up
Press shortly to move cursor down
OK
Press this button confirms a selection
and starts the playback of a media file.
Press to fast rewind from current play
and again to select the speed
SETUP
Press to fast forward from current play
and again to select the speed
In any mode, press to enter to
corresponding setting menu
GOTO
Jump to the appointed time/page when
playing video
DISPLAY
Press to display time, title, information of
chapter when play video and photo
0-9
Press to input digital
ALL
Press this button, the list of all
documents in storage media will display.
MUSIC
Press this button, the list of music
documents in storage media will display.
6
PHOTO
Press this button, the list of photo
documents in storage media will display.
MOVIES
Press this button, the list of film
documents in storage media will display.
Basic operation
Usage preparing
1. Power connection
Take out power adapter from the package and connect
2. Connection of TV audio and video output
The product is designed with multiple outputs, including
composite (AV), digital coax and HDMI. Individuals can
select different interfaces according to their needs. The
product can detect video output automatically, making the
operation friendly and convenient. Please refer to the
following instructions for connection to avoid any problem.
Composite output connection (AV)
Plug the yellow connector into the AV output of product
and AV input of TV, and plug the red and white
7
connector into the audio input of TV or HIFI. Turn on the
TV and select the correct AV mode. Turn on the product
and TV will display the initiation screen of the Micro2+.
Note: You must select to the “PAL/NTSC” output, if
not there is no video output by AV.
Coaxial output connection
Coaxial output: Connect the Coaxial connector of the
media player with the coaxial connector of other video or
audio device by Coaxial cable. Then enter the product's
audio output format interface, select the Digital Output
option “RAW”. It is available to enjoy 5.1 high quality
sounds through a multi channel decoder/amplifier with
coaxial input.
Note: when output format selected is “normal”, there is no
audio output by coaxial output, and when output format
selected is “SPDIF” / “RAW”, the HDMI and AV outputs
will have no audio output.
8
HDMI output mode
HDMI is an output with best audio and video quality which
outputs digital video and audio. Connect HDMI cable to
output of product and display device with HDMI input.
Select the correct HDMI input on the TV until it displays
the initiation screen of the Micro2+.
Note: When output is set to “HDMI”, there is no video
output by AV. When output is set to “PAL/NTSC” output,
there is no video output by HDMI.
The usage of USB HOST interface
The USB HOST port can read external mobile hard disk,
FLASH drive, digital cameras, card readers and other
data storage devices to directly play a variety of
high-definition formats high-fidelity audio and video files.
Operation of product usage
When connecting the power supply for the first time, press
the “Power” key on the remote control and the device will
power on automatically and appear at the main menu.
9
Please read the following instructions carefully to
understand the function of each option.
Main menu: There will be three function options on the
main menu.
You can enter this main menu by press “HOME” key on
the remote control. Under the main interface, you may
select the USB Device, Smart Card, or Setup icon by
press
and
key on the remote control, then press
“OK” key to browse or play the corresponding files stored
in the external USB, card and the card reader. In addition
to, you can go to the setup menu directly and set up the
“Language”, “Video”, “Audio”, “Photo” settings and so on
according to your needs.
10
Setup Menu
Select “Setup” option to enter the setup menu. Then
select any option you want by pressing
and
on
the remote controller, and press OK to confirm or press
“Return” to exit.
System Setup
Language: Select to choose the OSD (On Screen Display)
language. Press
and
to select the language.
Press OK to confirm.
Screen: Turns the screensaver function on or off. Press
the navigation keys to select. Screen saver mode will
automatically start after 2, 5 or 10 minutes of non activity.
AutoPlay: when AutoPlay is set to on, the Micro2+ will
begin to play media in the AUTOPLAY folder created in
the root directory of the media that is inserted. Power on,
11
the media player auto repeat play the video within the
folder, and it can plug and auto play.
Restore Default: restore the factory’s default settings
System Info: View software version information
Audio Setup
Select to choose the audio output:
Normal: Digital signal is directly outputted through product
SPDIF LPCM: The digital audio signal which is decoded
by the product outputs through coaxial
SPDIF RAW: The raw digital signal of multimedia data
directly outputs through coaxial, at this time the remote
control has no function of adjusting the volume.
Video Setup
Video Output: Select to adjust TV system: NTSC, PAL,
480P, 576P, 720P 50HZ, 720P 60HZ, 1080i 50HZ, 1080i
60HZ, 1080P 24HZ, 1080P 50HZ, 1080P 60HZ
Resume Play: On/Off. When a movie is paused, the
device will record the position that the movie is paused
and the next user can choose “Resume Play” to continue
from the last pause point.
Auto Detect: On/Off Turns the Auto Detect function on or
off.
12
Photo Setup
Slide Show Timing: Set time interval of slide show.
3/5/10/20s
Transition Effect: Select picture transition effects, there
are eight different effects to choose.
Background Music: There are two options to choose:
“Folder” and “Play List”. If you choose the option of
“Folder”, the music must be in the same folder as your
photos, and you can choose background music’s position
by the navigation. If you choose “Play List”, Every time
you startup the media player you must choose a folder as
the background music folder, and play a song in it. When
you play pictures the music within this folder will become
background music.
Picture view mode
Enter a storage device, and the files under the current
and
to select the
directory will be listed. Press
folder containing your photo files.
13
Enter the folder press
and
to select the photo you
want to view and press “OK”, the photo is displayed full
screen.
When you browse the photo, press the
and
key
to view the previous or next photo. If you want to playback
some music during the slideshow, simply make sure that
you copy your music file(s) in the same directory as the
pictures.
Music play mode
Enter a storage device and the files under the current
directory will be listed. Press
folder containing your audio files.
14
and
to select the
A thumbnail strip appears at the bottom of the screen,
and
to select
along with song information. Press
the file you want to play and press OK to play. This
browsing music function supports MP3, WMA, AAC APE,
OGG, FLAC format Playback.
Movie play mode
Enter a storage device, and the files under the current
directory will be set out. Press
and
to select the
folder containing your video files.
15
Enter the folder press
and
to select the movie
you want to view and press OK the movie is played full
screen. The Product supports multiple video formats,
including RM, RMVB, AVI, MPG, VOB, DAT and so on.
In addition, the Product also supports breakpoint movie
play. Next time you play the movie, there will be a prompt:
“is play from the breakpoint”. If you choose to “YES”, the
movie will start from where it stops last time.
Subtitle
The media player supports subtitle file formats including
SSA, SUB, SRT. Make sure the subtitle file and the video
file are in the same folder and the same name. When
playing the file, press SUBTITLE button to show / hide the
subtitle setup menu and realize subtitles settings. If using
external subtitles in a movie, press the arrow keys on the
16
remote control to select the option to adjust and press OK
to confirm. Then we can set the encode format , font size,
font colour of the subtitle and subtitle selection by
pressing UP/DOWN arrow key on remote control. For
example, to change the colour of subtitle, firstly select the
colour option by pressing right arrow keys, then press OK
key to enter, finally press up/down arrow key to select the
option you need and press OK key to confirm the setting.
Specification
USB host
Video output
Support multiple USB storage
Composite video /HDMI
Audio output
Stereo/digital HDMI/ Coaxial
Audio
Video
MP3, WMA, AAC, APE, OGG, FLAC
MKV, AVI, MP4, MPG, FLV, VOB,
DAT, RM/RMVB
SSA, SRT,SUB
JPG/BMP/PNG
AC input: 100V~240V,50/60HZ
DC output: 5V/2A
Subtitle
Picture
Power
adapter
Dimension
Weight
133 x 80 x 18 mm
340g
Supported video, audio and picture formats as follows
17
DECODE
FORMARTS
MPEG-1
MPEG-2
VIDEO
MPEG-4,
XVID
RM/RMVB
720×576
VOB
720×576
MPG
1920×1080P
AVI
1920×1080P
MP4
1920×1080P
MKV
1920×1080P
1920×1080P
MP3
PICTURE
320×240
MPG
RM/RVMB
H.264
AUDIO
RESOLUTION
DAT
AVI
1920×1080P
MP4
1920×1080P
MOV
1920×1080P
MKV
1920×1080P
Support
WMA
Support
AAC
Support
APE
Support
OGG
Support
FLAC
Support
JPG/JPEG
Support
BMP
Support
PNG
Support
Note: File format support can be changed or upgraded
without notice.
18
Maintenance notice
To protect the normal use of all accessories, please kindly
make sure to understand and pay attention to following
points.

Power input AC100~240V, output DC 5V/2A.

Under normal working status, power adapter will
keep warming, but body temperature of 60 degree
or under is normal.

Please be sure of aeration under normal working
status, do not put the device in bed, sofa, or similar
area where cooling effect is no good.

Please do not teardown personally, but send it back
to the pointed service agent, or there will be danger
of electronic shock.

Please pull out the cable and shut the device
immediately when cable broken or liquid in, and
send to pointed agent for repair.

We advise to use the product in the environment of
room temperature. The range of environment
temperature is 0~40°C.
19
FAQ
This chapter gives you information on how to solve some
problems that may occur with your player.
Q: I have connected the Player to my television. Why
is no picture showing on my television or no sound
coming from my television?
A: This problem may have several causes. Please check
the following items:
1) Please ensure that you have selected the correct AV
source on your television set.
2) Please check that you have connected the correct
cable for the output of the video and audio signals.
Information on the correct connection of the Player to your
home entertainment system can be found in the
“Connection of TV audio and video output” chapter in the
basic operation instructions.
3) The output signal of the player does not match the
signal source of the TV. Press “Video” on the remote
control to switch video output until there is image. Repeat
this procedure until the picture is correctly displayed on
your television.
Q: My Player does not play any sound.
A: The volume is too low / Mute is active.
Please check if the volume for your Player and your
television or your home entertainment system is set to an
20
adequate volume and that the sound is not switched off
via the “Mute” button. Otherwise, please select the correct
digital output mode in the Setup Menu. You can also refer
to the Audio Settings.
Q: Why must I NOT disconnect the player from the
mains supply without having switched if off
beforehand?
A: The loading or saving of the current system settings
takes approx. 10 seconds when the Player is turned on or
off. If the player is disconnected from the mains supply
without having been switched off beforehand, settings
and data may be lost. Please always switch off the Player
by pressing the power button on the device or on the
remote control and wait until the power button on the
Player lights up red.
Q: The language of the user interface has been
changed. How do I change the language?
A: In order to change the selected language, enter the
“Setting” menu. Select the language you want and press
the OK button on your remote control to confirm. The
selected languages are displayed.
21
Q: I have adjusted the settings of the Player under
“Settings” and would like to restore the factory
defaults.
A: execute the setting menu item “Restore defaults”. The
Player will be reset to the factory defaults. The saved files
are not deleted when you do this.
Q: During power on, why the TV will have a short
flash, blue screen or screensaver?
A: This is normal, when the system initialize, it will setup
the corresponding parameters so it can output the correct
video signal to the TV, during the initializing time, the TV
will receive incorrect signals or the signals will not be
stable and will cause the TV screen to flash, some TV will
treat it as no signal, and will display a blue screen or
screensaver
Others
The accessories of products may be different, for this
series products are various according to different series
and models.
Please refer to packing list or contact your agent for
information. Also understand no advance notice for
further
product
improvement,
outlook
design
and
specification update. The illustration may be a little
different from the real product.
22