Extron electronics | P/2 DA2 | P/2 DA2 PLUS

DISTRIBUTION AMPLIFIERS
P/2 DA2 PLUS
Two Output VGA-QXGA Distribution Amplifier
n 300 MHz (-3dB) RGB video bandwidth
n VGA-QXGA compatible
n Individually buffered outputs
n ID Bit routing
n Selectable input and output sync impedance
n Attached VGA input cable
n Attached external, international
power supply
The Extron P/2 DA2 PLUS is a compact, one input, two output, high performance
VGA-QXGA distribution amplifier. It’s designed for presenters-on-the-go or
wherever a single, high resolution computer video signal needs to be routed to
two displays simultaneously.
www.extron.com
DESCRIPTION
specifications
The Extron P/2 DA2 PLUS is a compact one input, two output,
VGA-QXGA distribution amplifier. It is ideal for use in dual-display
presentation systems or anywhere that a single, high resolution
computer-video signal needs to be routed to two displays. The
P/2 DA2 PLUS distribution amplifier is equally at home on the road
with presenters-on-the-go, or when installed in small, tight places.
The P/2 DA2 PLUS offers 300 MHz (-3 dB) RGB video bandwidth and
is compatible with VGA-QXGA resolution graphic cards, monitors,
and projectors. Sync impedance can be set for optimum performance
with laptop computers.
For the utmost in portability, the P/2 DA2 PLUS is housed in a
briefcase-friendly, compact enclosure. To ensure that all components
stay together, the P/2 DA2 PLUS features an attached, 5-foot (1.5 m)
male VGA cable, as well as an attached, external, international
power supply.
Features
n Bandwidth – 300 MHz (-3dB) RGB video bandwidth maintains
signal integrity.
n Compatibility – Compatible with VGA-QXGA resolution graphic
cards, monitors, and projectors, as well as Macintosh® computers
with 15-pin HD outputs.
n ID bits – ID bits are routed through the local monitor output.
n Selectable sync impedance – Sync impedance can be set via
DIP-switch for optimum performance with laptop computers.
n Individually buffered outputs – Buffered outputs maintain the
original signal integrity and eliminate noise interference.
n External International Power supply – An external, attached,
autoswitching power supply provides worldwide power compatibility.
Video
Gain . .............................................. Unity
Peaking............................................ Fixed
Bandwidth....................................... 300 MHz (-3 dB)
Video input
Number/signal type.........................
Connectors......................................
Nominal level...................................
Minimum/maximum levels..............
Impedance . ....................................
Horizontal frequency........................
Vertical frequency.............................
Return loss ......................................
1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs
(1) 15-pin HD male cable (attached)
0.7 Vp-p for RGB
Analog: 0.3 V to 1.5 Vp-p with no offset
at unity gain
75 ohms
15 kHz to 135 kHz
30 Hz to 170 Hz
<-38 dB @ 5 MHz
Video output
Number/signal type......................... 1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs
output
1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs
local monitor output/loop-through
(ID bits are passed through)
Connectors ..................................... (2) 15-pin HD female
Nominal level................................... 0.7 Vp-p for RGB
Minimum/maximum levels.............. 0.3 V to 1.5 Vp-p (follows input)
Impedance . .................................... 75 ohms
Return loss ...................................... -41 dB @ 5 MHz
DC offset ........................................ ±5 mV maximum with input at 0 offset
Sync
Input type . .....................................
Output type.....................................
Input level . .....................................
Output level . ..................................
Input impedance ............................
Output impedance .........................
Max. propagation delay...................
Max. rise/fall time............................
Polarity.............................................
R GBHV, RGBS, RGsB, RsGsBs
RGBHV, RGBS, RGsB, RsGsBs
Analog or TTL, 1.7 V to 5 Vp-p
TTL: 0-5 Vp-p, unterminated
510 ohms (default) or 10k ohms, selectable
25 ohms (default) or 50 ohms, selectable
60 ns
4 ns
Positive or negative (follows input)
General
Application Diagram
Extron
P/2 DA2 Plus
Distribution Amplifier
PC
Local
Monitor
Projector
Attached external power supply . .... 100 VAC to 240 VAC, 50/60 Hz, 4.5 watts,
external, autoswitchable; to 12 VDC, 1 A,
regulated
Power input requirements................ 12 VDC, 0.2 A
Rack mount...................................... No
Enclosure type.................................. Plastic
Enclosure dimensions ...................... 1.5" H x 5.0" W x 2.5" D
3.8 cm H x 12.7 cm W x 6.4 cm D
(Depth excludes connectors.)
Product weight................................ 1.6 lbs (0.7 kg)
Shipping weight ............................. 3 lbs (2 kg)
Listings............................................. UL, CUL
Compliances.................................... CE
MTBF............................................... 30,000 hours
Warranty ......................................... 3 years parts and labor
NOTE: All nominal levels are at ±10%.
Model
P/2 DA2 PLUS
Version Description
Part Number
1x2 VGA-QXGA....................................................... 60-046-03
Specifications are subject to change without notice.
© 2007 Extron Electronics. All rights reserved. All trademarks mentioned are the property of their respective owners.
07-01
68-1357-01
REV. A
Download PDF