ViewSonic | E70FSB | User guide | ViewSonic E70FSB User guide

ViewSonic
®
E70fB/E70fSB
CRT Monitor
- User Guide
- Guide de l’utilisateur
- Guía del usuario
- Guia do usuário
ViewSonic
®
Model No. : VCDTS22355-6
Content
Compliance Information ........................................................................................ 1
Copyright Information............................................................................................. 2
Product Registration ................................................................................................ 2
Geeting Started
Package Contents .................................................................................................... 3
Precautions .............................................................................................................. 3
Quick Installation .................................................................................................... 4
Using the Monitor
Setting the Timing Mode ......................................................................................... 5
Adjusting the Screen Image .................................................................................... 6
OSD Lock Settings .................................................................................................. 7
Main Menu Controls ............................................................................................... 8
Other Information
Specifications .......................................................................................................... 10
Troubleshooting....................................................................................................... 11
Cusomer Support ..................................................................................................... 12
Cleaning the Monitor .............................................................................................. 13
Limited Warranty .................................................................................................... 14
ViewSonic
E70fB/E70fSB
i
Compliance Information
For U.S.A.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy, and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Warning
To assure continued FCC compliance, the user must use grounded power supply cord and the
cables which are included with the equipment or specified. Also, any unauthorized changes or
modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate this device.
For Canada
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numeique de la Classe B repecte toutes les exigences du Reglement sur le
materiel brouilleur du Canada.
User Information for all Countries
Notice: Use the cables which are included with the unit or specified.
ViewSonic
E70fB/E70fSB
1
Copyright Information
Copyright© ViewSonic Corporation, 2006. All rights reserved.
Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of
Microsoft Corporation in the United States and other countries.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered
trademarks of ViewSonic Corporation.
VESA is a registered trademark of the Video Electronics Standards Association. DPMS and
DDC are trademarks of VESA.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages resulting from
furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right
to change product specifications without notice. Information in this document may change
without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any
purpose without prior written permission from ViewSonic Corporation.
Product Registration
To meet your future needs, and to receive any additional product information as it becomes
available, please register your product on the Internet at: www.viewsonic.com. The
ViewSonic® Wizard CD-ROM also provides an opportunity for you to print the registration
form, which you may mail or fax to ViewSonic.
For Your Records
Product Name:
Model Number:
Document Number:
Serial Number:
Purchase Date:
E70fB/E70fSB
ViewSonic 17” Color Monitor
VCDTS22355-6
E70fB/E70fSB-9_UG_ENG Rev. 1C 05-16-06
_____________________________________
_____________________________________
Product disposal at end of product life
ViewSonic is concerned about the preservation of our environment. Please dispose of this
product properly at the end of its useful life. For TCO’03 recycling information, please refer
to our website:
1. USA: www.viewsonic.com/pdf/recyclePlus.pdf
2. Europe: www.viewsoniceurope.com
3. Taiwan: recycle.epa.gov.tw.
ViewSonic
E70fB/E70fSB
2
Geeting Started
Congratulations on your purchase of a ViewSonic® color monitor.
Important! Save the original box and all packing material for future shipping needs.
Note : The word “Windows” in this user guide refers to the following Microsoft operating
systems: Windows 95, Windows NT, Windows 98, Windows 2000, Windows Me (Millennium),
and Windows XP.
Package Contents
Your package includes:
• Color monitor
• DB-15 video cable
• Power cord
• ViewSonic Wizard CD-ROM
• Quick Star Guide
Note : The CD jacket contains the Quick Start Guide, and the CD includes the User Guide
PDF files and INF/ICM display optimization files. The INF file ensures compatibility with
Windows operating systems, and the ICM file (Image Color Matching) ensures accurate onscreen colors. ViewSonic recommends that you install both files.
Precautions
•
For best viewing conditions sit at least
18” from the monitor.
•
Avoid touching the screen with your
fingers. Oils from the skin are difficult
to remove.
•
Never remove the rearcover. The
monitor contains high voltage parts. You
may suffer serious injury if you touch
these parts.
•
Avoid exposing the monitor to direct
sunlight or another heat source,
including an open flame. The monitor
should be facing away from direct
sunlight to reduce glare.
•
Always handle your monitor with care
when moving it.
ViewSonic
E70fB/E70fSB
•
Place your monitor in a well ventilated
area. Do not place anything on the
monitor that prevents adequate
dissipation of heat.
•
Ensure the area around the monitor is
clean and free of moisture.
•
Keep the monitor away from magnets,
motors, transformers, speakers, and
televisions.
•
Do not place heavy objects on the
monitor, video cable, or power cord.
•
If smoke, abnormal noise, or strange
odor is present, immediately switch
the monitor off and call your dealer
or ViewSonic. It is dangerous to
continueusing the monitor.
3
Quick Installation
1.
2.
Connect power cord
Connect the power cord to a properly
grounded AC outlet.
Connect video cable
M a ke s u r e b ot h t he mon it or a nd
computer are turned OFF.
• Con ne ct t he v ide o cable t o t he
computer.
Macintosh ® users: Models older than
G3 require a Macintosh adapter. Attach
the adapter to the computer and plug the
video cable into the adapter.
To order a ViewSonic ® Macintosh
a d a pt e r, c ont a c t View Son ic. Se e
“Customer Support” on page 12.
3.
Turn ON monitor and computer
Turn ON the monitor, then turn ON the
computer. This sequence (monitor before
computer) is very important.
Note : At this point Windows users may
receive a message asking them to install
the INF file.
4.
Install Display Optimization files
(INF and ICM files)
(1) Insert the ViewSonic Wizard CDROM into your computer’s CD-ROM
drive.
Note : If your computer does not have a
CD-ROM drive, see “Customer Support”
on page 12.
(Continued)
(2) Wait for the CD-ROM to auto-start.
Note : If the CD-ROM does not autostart:
double-click on the CD-ROM icon in
Windows Explorer, then double-click on
viewsonic.exe.
(3) Follow the on-screen instructions.
5.
Windows users: Set the Timing
Mode (resolution and refresh rate)
Example: 1280 X 1024 @ 75Hz.
For instructions on changing the
resolution and refresh rate, see the
graphic card’s user guide.
Installation is complete. Enjoy your
new ViewSonic color monitor.
To be best prepared for any future
customer service needs: print this user
guide and write the serial number in
“For Your Records” on page 2. (See
back of monitor.)
To register your product go online to
www.viewsonic.com.
The ViewSonic Wizard CD-ROM also
provides an opportunity for you to print
the registration form which you may
mail or fax to ViewSonic.
Power cord
AC wall outlet
Video cable
ViewSonic
E70fB/E70fSB
4
Using the Monitor
Setting the Timing Mode
Setting the timing mode is important for maximizing the quality of the screen image and
minimizing eye strain. The timing mode consists of the resolution (example 1024 x 768) and
refresh rate (or vertical frequency; example 85 Hz). After setting the timing mode, use the
OnView® controls to adjust the screen image.
For the best picture quality set your monitor timing mode to:
VESA 1024 x 768 @ 85 Hz.
To set the Resolution:
1.
Right-click on the Windows desktop.
2.
Click Properties on the drop-down menu.
3.
Click the Settings tab.
4.
Move the slider pointer which displays in the Desktop area or Screen area in the window.
Note : The refresh rate should already be set if you have done the CD installation (or refer to
your graphics card documentation).
ViewSonic
E70fB/E70fSB
5
Adjusting the Screen Image
Use the buttons on the front control panel to display and adjust the OnView® controls which
display on the screen. The OnView controls are explained at the top of the next page and are
defined in “Main Menu Controls” on page 8.
Main Menu
MAIN MENU (1)
CONTRAST / BRIGHTNESS
With OnView controls
ZOOM
H. POSITION / SIZE
V. POSITION / SIZE
PINCUSHION / PIN BALANCE
TRAPEZOID / PARALLEL
TILT
EXIT :
1
SELECT :
2
Front Control Panel
ViewSonic
Memory Recall returns adjustments to the original factory settings if the display is
operating in a factory preset timing mode listed in this user guide.
Displays Main Menu; also
saves changes/exits Main
Menu
Scroll through menu options
and adjust the displayed
control
ViewSonic
E70fB/E70fSB
Power Light
Power On/Off
Displays control screen for
highlighted control (or pair
of controls). Also, toggles
between pairs of controls on
some control screens
6
OSD Lock Settings
You have the option of using the On Screen Display (OSD) locking feature, OSD LOCK, to
prevent unwanted changes to the current image settings.
•
OSD Lock : Press and hold the [1] and [▼] buttons on the face of the monitor for 5
seconds. The message “OSD LOCK” will then display briefly, indicating that the OSD
image settings are now locked.
•
OSD Unlock : Press and hold the [1] and [▼] buttons again for 5 seconds. The message
“OSD UNLOCK” will then display briefly, indicating that the OSD image settings are
now unlocked.
Do the following to adjust the screen image:
1. To display the Main Menu, press button [1].
MAIN MENU (1)
CONTRAST / BRIGHTNESS
ZOOM
H. POSITION / SIZE
V. POSITION / SIZE
PINCUSHION / PIN BALANCE
TRAPEZOID / PARALLEL
TILT
EXIT :
2.
SELECT :
1
2
To select a control you want to adjust, press the arrow buttons on the front control panel
of your monitor and scroll through the choices. When the control you want is highlighted,
press button [2].
Note : Some controls on the Main Menu are listed in pairs, such as Contrast/Brightness.
Display control screen (sample shown in step 3 below). Press button [2] to toggle to the
next control in the pair.
3.
To adjust the selected control, such as CONTRAST in the sample below, press the arrow
buttons.
CONTRAST
EXIT : 1
4.
BRIGHTNESS : 2
To save the control setting and Exit the menu press button [1] twice.
ViewSonic
E70fB/E70fSB
7
Main Menu Controls
Adjust the menu items shown below by using the up and down buttons.
Control
Explanation
__________________________________________________________________________________
Contrast adjusts the difference between the image background
(black level) and the foreground (white level).
Brightness adjusts the background black level of the screen
image.
Zoom expands and contracts the entire screen image.
Horizontal Position moves the screen image left or right.
Horizontal Size adjusts width of the screen image.
Vertical Position moves the screen image up or down.
Vertical Size adjusts the height of the screen image.
Pincushion curves the vertical sides of the screen image.
Pin Balance curves the vertical edges of the screen image to
the left or right.
Trapezoid adjusts the top and bottom of the screen image until
they have equal length.
Parallel slants the vertical edges of the screen image until they
are parallel.
Tilt rotates the entire screen image.
Degauss removes the build-up of magnetic fields that can
cause irregular colors to appear around the edges of screen
images. There are two ways to degauss the display:
automatically by turning the monitor on, or manually by
selecting the Degauss control from the menu. With Degauss
selected from the menu, press button [2] to degauss the monitor
manually.
Important: Do not degauss repeatedly. Doing so can be
harmful to the display. Wait at least 20 minutes before selecting
this control again.
ViewSonic
E70fB/E70fSB
8
Control
Explanation
__________________________________________________________________________________
ViewMatch® Color provides several color options: several
preset color temperatures and User Color which allows you to
adjust red (R), green (G), and blue (B). The factory setting for
this product is 9300K (9300° Kelvin).
9300K— Adds blue to the screen image for cooler white (used
in most office settings with fluorescent lighting).
6500K— Adds red to the screen image for warmer white and
richer red.
5000K— Adds blue and green to the screen image for a darker
color.
User Color — Individual adjustments for red, green, and blue.
Moire Moire reduces interference patterns that appear as ripples,
waves, or unwanted background color textures. Interference
patterns of this type are most noticeable when viewingimages
having closely spaced lines or finely detailed patterns.
Language allows you to choose from among several languages
for the menus and control screens: English, French, German,
Italian, Spanish, Traditional Chinese, Simplified Chinese, and
Japanese.
Memory Recall returns adjustments to the original factory
settings if the display is operating in a factory preset timing
mode listed in this user guide.
Exception: This control does not affect changes made with the
User Color control.
OSD Position allows you to move the on-screen display
menus and control screens.
ViewMeter® displays the frequencies (horizontal and vertical)
coming from the graphics card of the computer.
ViewSonic
E70fB/E70fSB
9
Other Information
Specifications
CRT
Type
Dot Pitch
Phosphor
Glass suface
O
17”(16.0” viewable diagonal area). 90 deflection,
0.21 mm horizontal, 0.13 mm vertical,
and 0.25 mm diagonal dot pitch
RGB P22, medim short persistence
TM~50%, anti-glare and anti-reflection
Input Signal
Video
Sync
RGB Analog (0.7/1.0 Vp-p, 75 Ohms)
fH:30-70 kHz, fv:50-160 Hz
H/V Separate (TTL), Composite
Compatibility
PC
Macintosh1
VGA up to 1280 x 1024
Power Macintosh (may require Macintosh cable adapter)
Resolution
Recommended and
supported
1280 x 1024 @ 60 Hz
1024 x 768 @ 75, 85 Hz
800 x 600 @ 75, 85 Hz
640 x 480 @ 60, 75, 85 Hz
640 x 400 @ 70 Hz
MAC 640 x 480 @ 67 Hz
MAC 800 x 600 @ 75 Hz
MAC 1024 x 768 @ 75 Hz
Power
Voltage
AC 100-240 VAC
50/60 Hz
Display Area
Default
Full scan
310 mm(H) x 230 mm(V) (typical)
325 mm(H) x 243 mm(V) (depends on signal timing)
Operating
Conditions
Temperature
Humidity
Altitude
32 F to 104 F (0 C to 40 C)
5% to 95% (no condensation)
To 10,000 feet
Storage
Conditions
Temperature
Humidity
Altitude
-40 F to 140 F (-40 C to 60 C)
5% to 95% (no condensation)
To 40,000 feet
Dimensions
Physical
(monitor)
410 mm (W) x 405.5 mm (H) x 420 mm (D)
16.1” (W) x 16.0” (H) x 16.5” (D)
Weight
Net
15.0 kg / 33.1 lb (monitor only)
Regulations
.
O
O
O
O
O
O
O
MPR II, FCC-B, ICES-B, DHHS
Power Consumption
Modes
1
O
On
Sleep
Off
< 75W typical; (Green LED)
< 4W (Orange LED)
< 2W
Macintosh models prior to G3 require a Macintosh adapter. To order a ViewSonic® Macintosh adapter, contact
Customer Support. You will need to provide the product serial number.
Note : This product was designed for operation in the magnetic fields of the hemisphere where it was purchased.
ViewSonic
E70fB/E70fSB
10
Troubleshooting
No power
•
Make sure power button (or switch) is ON.
•
Make sure A/C power cord is securely connected to the back of the monitor and to a
power outlet.
•
Plug another electrical device (like a radio) into the power outlet to verify that the outlet
is supplying proper voltage.
Power is ON but no screen image
•
Make sure the video cable supplied with the monitor is tightly secured to the video
output port on the back of the computer. If the other end of the video cable is not attached
permanently to the monitor, tightly secure it to the monitor.
•
Adjust brightness and contrast.
•
Verify whether an adapter is required for proper signal continuity between graphics card
and monitor.
Flickering
•
Not enough power supplied. Connect the monitor to a different outlet. If using a surge
protector, reduce the number of devices plugged in.
•
Check the ViewMeter from the main menu to verify the refresh rate (vertical frequency)
is 75 Hz or higher. See “Specifications” on page 10.
•
Remove any devices from the area around the monitor that emit magnetic fields such as
radios, surge protectors, unshielded speakers, fluorescent lights, AC power converters,
desk fans, etc.
•
Make sure the graphics card in your computer can use non-interlaced mode at the desired
frequencies. To enable your graphics card to support higher refresh rates, try selecting
fewer colors or running lower resolutions.
Wrong or abnormal colors
•
If any colors (red, green, or blue) are missing, check the video cable to make sure it is
securely connected. Loose or broken pins in the cable connector could cause an improper
connection.
•
Connect the monitor to another computer.
•
Select Degauss from the Main Menu. Do this only once.
•
If you have an older graphics card, contact ViewSonic® Customer Support.
Entire screen image rolls vertically
•
Make sure video input signals are within the monitor’s specified frequency range.
•
Try the monitor with another power source, graphics card, or computer system.
•
Connect the video cable securely.
Control buttons do not work
•
Press only one button at a time.
ViewSonic
E70fB/E70fSB
11
Customer Support
For technical support or product service, see the table below or contact your reseller.
Note : You will need the product serial number.
Country/
Region
Web Site
T=Telephone
F=Fax
E-mail
United States
www.viewsonic.com/support/
T: 800 688 6688
F: 909 468 1202
service.us@viewsonic.com
Canada
www.viewsonic.com/support/
T= (866) 463 4775
F= (909) 468 1202
service.ca@viewsonic.com
United Kingdom
www.viewsoniceurope.com/uk
T= 0207 949 0307
F= +44 (0) 1293 643 910
service.eu@viewsoniceurope.com
Europe, Middle East,
Baltic countries, and
North Africa
www.viewsoniceurope.com
Contact your reseller
service.eu@viewsoniceurope.com
Australia and New
Zealand
www.viewsonic.com.au/support/
AUS= 1800 880 818
NZ= 0800 008 822
service@au.viewsonic.com
Singapore/
Malaysia/Thailand
www.viewsonic.com.sg/support/
T= +65 6273 4018
F= +65 6273 1566
service@sg.viewsonic.com
South Africa/
Other countries
www.viewsonic.com
T= +886 (2) 2246 3456
F= +886 (2) 8242 3668
service@sd.viewsonic.com
Hong Kong
www.hk.viewsonic.com/support/
T= +852 310 22 900
F= +852 2268 6778
service@hk.viewsonic.com
Macau
www.hk.viewsonic.com/support/
T= +853 700 303
service@hk.viewsonic.com
ViewSonic
E70fB/E70fSB
12
Cleaning the Monitor
•
Make sure the monitor is turned off.
•
Never spray or pour any liquid directly onto the screen or case.
To clean the screen :
1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
2.
If still not clean, apply a small amount of non-ammonia, non-alcohol based glass
cleaner onto a clean, soft, lint-free cloth, and wipe the screen.
To clean the case :
1. Use a soft, dry cloth.
2.
If still not clean, apply a small amount of a non-ammonia, non-alcohol based, mild nonabrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.
Disclaimer :
ViewSonic does not recommend the use of any ammonia or alcohol-based cleaners on the
monitor screen or case. Some chemical cleaners have been reported to damage the screen
and/or case of the monitor. ViewSonic will not be liable for damage resulting from use of any
ammonia or alcohol-based cleaners.
ViewSonic
E70fB/E70fSB
13
Limited Warranty
VIEWSONIC® CRT MONITORS
What the warranty covers:
ViewSonic® warrants its products to be free from defects in material and workmanship, under normal use, during
the warranty period. If a product proves to be defective in material or workmanship during the warranty period,
ViewSonic® will at its sole option repair or replace the product with a like product. Replacement product or parts
may include remanufactured or refurbished parts or components.
How long the warranty is effective:
ViewSonic® Monitor products are warranted for three (3) years for all parts excluding the display tube, and three (3) years for
labor from the date of the first customer purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
b.
c.
d.
e.
f.
g.
h.
failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by ViewSonic®.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuations or failure.
Use of supplies or parts not meeting ViewSonic’s specifications.
Normal wear and tear.
Any other cause which does not relate to a product defect.
3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static image is displayed
on the product for an extended period of time.
4. Removal, installation, transportation, insurance, and set-up service charges.
How to get service:
1. For information about receiving service under warranty, contact ViewSonic® Customer Support at 800-888-8583. You
will need to provide your product’s serial number.
2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your
address, (d) a description of the problem, and (e) the serial number of the product.
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic® service center or
ViewSonic®.
4. For additional information or the name of the nearest ViewSonic® service center, contact ViewSonic®.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein including the implied
warranty of merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic® shall not be liable for:
1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of
the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business
relationships, or other commercial loss, even if advised of the possibility of such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
Effect of state law:
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states
do not allow limitations on implied warranties and/or do not allow the exclusion of incidental or consequential damages, so
the above limitations and exclusions may not apply to you.
Sales outside the U.S.A. and Canada:
For warranty information and service on ViewSonic® products sold outside of the U.S.A. and Canada, contact ViewSonic® or
your local ViewSonic® dealer.
Warranty_VSMON Rev. 1c
4.3: ViewSonic CRT Monitor Warranty
ViewSonic
E70fB/E70fSB
1 of 1
Release Date: 03-31-05
14
ViewSonic
®
Download PDF