Bush | 1080P | Instruction manual | Bush 1080P Instruction manual

32”/40” 1080P Digital LED LCD Television
INSTRUCTION MANUAL
Customer helpline: 0845 604 0105
Contentss
01 Safety Warnings
2
Welcome ................................................................................2
Important Information ......................................................2
Safety notice .........................................................................3
Electrical connections........................................................4
02 About your LED LCD TV
5
Viewing the Control Panel................................................5
Viewing the Connection Panel .......................................5
Get to know your remote control..................................6
Installing the Stand ........................................................... 7
Connecting your TV............................................................7
Preparation of your remote control..............................8
03 Getting Started
9
Setting up...............................................................................9
Tuning your TV .....................................................................9
Common interface ......................................................... 12
Using your TV..................................................................... 14
Adjusting picture settings............................................. 14
Adjusting sound settings .............................................. 15
Function settings.............................................................. 16
Time settings...................................................................... 17
Lock menu settings ......................................................... 18
Shortcut menu display ................................................... 19
04 Using the features
21
Teletext functions............................................................. 21
USB mode............................................................................ 22
Using external USB disk for recording ...................... 24
05 Reference Sections
26
Troubleshooting ............................................................... 26
Specification ...................................................................... 27
06 Product Guarantee
BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105
28
1
01 Safety Warningss
WELCOME
Thanks for buying this 32"/40" 1080P Digital LED LCD TV. This guide will help you set up and begin using your TV.
First, check the contents of your box with the parts checklist below:
t 32"/40" 1080P Digital LED LCD TV
t Remote control
t AAA battery ×2
t Instruction Manual
t Quick Start Guide
t TV stand
t 5 x Screws for TV stand
t Component adapter , Component audio adapter , SCART adapter
t TV Digital Guide
t Cover-Bottom
Now you can get started!
IMPORTANT INFORMATION
READ ALL INSTRUCTIONS BEFORE USE AND KEEP FOR FUTURE REFERENCE.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE.
FOR ANY PROBLEMS, REFER SERVICING TO THE CUSTOMER HELP LINE. THERE IS A LIGHTNING ARROW SYMBOL IN
THE TRIANGLE: THIS SYMBOL INDICATES HIGH VOLTAGE IS PRESENT INSIDE. IT IS DANGEROUS TO MAKE ANY KIND OF
CONTACT WITH ANYINSIDE PART OF THIS PRODUCT.
THERE IS A EXCLAMATION MARK IN THE TRIANGLE: THIS SYMBOL ALERTS YOU THAT IMPORTANT LITERATURE
CONCERNING OPERATION AND MAINTENANCE HAS BEEN INCLUDED WITH THIS PRODUCT.
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK AND FIRE, DO NOT PUT THE TV SET NEAR
SOURCES OF HUMIDITY. DO NOT USE ANY ABRASIVE CLEANERS WHICH MAY SCRATCH OR DAMAGE
THE LCD SCREEN. AVOID CONTACT WITH OBJECTS THAT MAY SCRATCH THE LCD SCREEN.
NOTE: SERVICING THE UNIT YOURSELF IS UNAUTHORISED AND COULD LEAD TO INJURY OR PRODUCT
DAMAGE. REFER ALL SERVICING TO THE CUSTOMER HELPLINE.
P.02
BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105
SAFETY NOTICE
O For your protection,please read these instruction completely and keep this manual for future reference.
O Please ensure that the set has adequate ventilation.
O Do not place the set near a heat source or in direct sunlight.
O Do not put the unit near water or oil as it may cause a fire.
O During thunderstorms, unplug both the antenna and power plug to prevent damage.
O Do not use a damaged power plug or put the power supply near a heat source as it may cause electric shock or
fire.
O To prevent potential fire, do not overload an electrical outlet with too many plugs.
O Place the set on a level surface to prevent it from tipping and potential damage.
O Do not remove the cover of the set or try to service your TV. This may result in electrical shock or fire. All service
work must be completed by an authorised technician.
O If there are any abnormal sounds or smells from the unit, unplug it immediately and contact an authorised
service provider.
O To prevent fire, do not use or store any flammable materials near the unit.
O To prevent electric shock, ensure that any external antenna connected to the set is clear of contact with any
power lines.
O Do not plug/unplug the unit while your hands are wet. This may cause an electric shock.
O Please ensure a solid connection with the AC wall socket in order to avoid shock and potential fire.
O To prevent electric shock or fire, please prevent rain from entering the set along the wire connected to the
outside antenna.
O When cleaning, please unplug the unit. Use a soft cotton cloth. Do not use any abrasive cleansers, and prevent
water from entering the set.
O If any plugs or input wires are dirty, unplug the set and clean them. This will prevent the risk of electric shock or
fire.
O If the set is not going to be used for an extended period, unplug the unit from the main power.
The apparatus should not be exposed to dripping or splashing and no objects filled with liquids, such as vases
should be placed on the apparatus.
The mains plug is used for disconnecting the device, make it easily accessible.
Do not use any accessories that are not recommended by the manufacture.
BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105
P.03
01 Saftety Warnings
O To prevent fire, do not place the unit near a damp wall.
ELECTRICAL CONNECTIONS
CONNECTING TO POWER
Check that the voltage marked on the product corresponds with your supply voltage. This product is fitted with a
13A plug complying with BS1363. If this plug is unsuitable or needs to be replaced, please note the following:
PLUG REPLACEMENT
If you need to replace the fitted plug:
WARNING
Never connect live or neutral wires to the earth terminal of the
plug. Only fit an approved 13 Amp BS1363/A plug and the correct
rated fuse. If in doubt, consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured as follows:
Blue
Neutral
Brown
Live
As the colours of the wires in the mains lead of this apparatus may not correspond
with the coloured markings identifying the terminals in your plug, proceed
as follows:
The wire which is coloured blue must be connected to the terminal, which is marked with N or coloured blue. The
wire which is coloured brown must be connected to the terminal which is marked L or coloured brown. The green
and yellow wire must be connecting to the terminal marked with the letter E or the earth symbol . Always ensure
that the plug cord grip is fastened correctly.
If a 13A (BS1363) fused plug is used it must be fitted with a 3A fuse conforming to BS1362 and be ASTA approved. If
in doubt contact a qualified electrician.
WASTE ELECTRICAL PRODUCTS SHOULD NOT BE DISPOSED OF WITH
HOUSEHOLD WASTE. PLEASE RECYCLE WHERE FACILITIES EXIST. CHECK
WITH YOUR LOCAL AUTHORITY FOR RECYCLING ADVICE.
TruSurround XT, SRS and the
symbol are trademarks of SRS Labs, Inc. TruSurround XT technology is
incorporated under license from SRS Labs, Inc.
TruSurround XT® creates a truly immersive surround sound experience with rich bass and clear dialog from only
two speakers.
P.04
BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105
02 About your LED LCD TVs
Viewing the Control Panel
SO URCE
1
MENU
2
VOL
3
CH
4
5
4 CH+/5 POWER
Toggles between all the available input
sources
Press to see an on-screen menu of your TV’s
features.
Press to increase or decrease the volume .
1 SOURCE
2 MENU
3 VOL+/-
Press to change channels.
Press to turn the TV on and off.
Viewing the Connection Panel
[TV Rear Panel]
8
[TV Side Panel]
1
1
2
3
4
5
6
7
SCART
Component
Component Audio
PC
PC/DVI AUDIO
HDMI3 IN
HDMI2 IN
L
R
AUDIO
COMPONENT IN
2
input
input
input
input
input
input
input
Pr
3
PC
4
PC/DVI AUDIO
PC IN
HDMI 3 IN
HDMI 2 IN
6
7
5
8
9
0
A
B
C
10
11
USB
SCART
Pb
12
HDMI 1 IN
Y
DIGITAL AUDIO OUT
(OPTICAL )
ANT IN
9
13
Common Interface
Earphone
ANTENNA
input
Optical
output
USB
HDMI1 IN
input
BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105
P.05
GET TO KNOW YOUR REMOTE CONTROL
When using the remote control, aim it towards the remote sensor on the TV.
Note
O RED button, GREEN button, BLUE
button and YELLOW button are fast
text button in analog signal. Function
button in DVBT (just reference the
OSD)
P.06
1
2
3
4
5
6
7
8
9
0
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
[
\
]
`
Stand By
DVD Menu / REC
DVD open / close
Picture Mode
Sound Mode
Call Screen Display
Sleep button
DTV Audio / NICAM / DVD Audio
Aspect Ratio Control button
Channel list button
Subtitle button
Program Number Channel selection
Source Exchange
Q.VIEW / Swap Channel
V+/V-: Volume selection
P+/P-: Channel selection
Mute
Menu button
GUIDE button (only for DTV)
Favourite list button
OK button
Cursor Mover button
Back button (only for USB)
Exit Screen Display
REPEAT (only for DVD, USB, REC & Timeshift)/CANCEL button
Zoom (only for DVD & USB)/Teletext index (only for TV) / REC index
Play / Pause button (only for DVD & USB) / Timeshift
Stop (only for DVD, USB, REC & Timeshift)
Fast Reverse (only for DVD, USB, REC & Timeshift)
Fast Forward (only for DVD, USB, REC & Timeshift)
Previous (only for DVD, USB & REC)
Next (only for DVD, USB & REC)
DVD Set up / Text
DVD Title / Teletext Mix
DVD Search / Teletext Subcode
DVD 10+ / Teletext Hold
DVD Program / Teletext Reveal
DVD A-B Repeat / Teletext Size
DVD Call / Teletext Mode
DVD Angle/Teletext Time
BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105
Installing the Stand
To get started, you need the (5) screws that are included in the box with your TV .
Glass stand is BS EN 12150: 2000 comply
Model / Catalogue Number: 529-6091
Retailer: Argos
Retailer address: 489-499 Avebury
Boulevard
Saxon Gate West
Central Milton Keynes
MK9 2NW
To attach the stand to your TV, follow these steps:
B
C
D
E
Lay your TV screen down on a soft surface such as a couch or bed.
Make sure to distinguish between the front and back of the stand when assembling them.
Attach your stand to the TV.
02 About your LED LCD
A
Make sure the stand is installed on the stand at a proper level, do not apply excess pressure.
Fasten the (5) screws at the five positons as the right picture.
CONNECTING YOUR TV
ANTENNA CONNECTION
Connect your aerial to the side of the TV into the ANTENNA IN socket.
IMPROVE YOUR SIGNAL
To improve picture quality in a poor signal area, use a signal amplifier (not supplied).
CONNECT YOUR PC TO THE TV
You can use your TV as a monitor for your personal computer by connecting it with a VGA cable (not supplied).
A
B
C
D
E
F
Read your computer user guide and check it has a VGA connector.
Turn the power off on your TV and PC.
Connect a D type 15-pin VGA interface cable to the VGA video interface connector on the PC. Connect the other
end of the cable to the PC interface connector on the TV. Tighten the screws on the VGA connectors and connect
the audio cable (not supplied) to the audio input socket on the back of the TV.
Turn on the power of the TV firstly and then the PC.
Press the button on the TV or TV remote control to set the video input mode to PC.
Once the image shows, if there is noise present, change the VGA mode to another resolution, change the refresh
rate to another rate or adjust the brightness and contrast on the menu until the picture is clear.
BUSH | 1080p Digital LED LCD| User Manual | Helpline: 0845 604 0105
P.07
CONNECT A DVD PLAYER TO YOUR
TV
PREPARATION OF
YOUR REMOTE
Connect the DVD video outputs (Y, Pb, Pr) with the
supplied component adapter and component audio
adapter to the COMPONENT (Y, Pb, Pr) IN socket on your
TV.
CONTROL
A
B
BATTERY INSTALLATION
C
Turn on the DVD player and insert a DVD.
Press the source buttom on the remote control to
select the source of COMPONENT in your TV .
Refer to the DVD player user guide for operating
A
Place the remote control face down, then open the
cover of the battery compartment.
instructions.
DVD
B
Install two AAA batteries. (The + and - symbol of the
battery must match with the marks on the remote).
SCART INPUT
A
B
C
Connect the scart lead from the external device
(DVD player, Set-top box or games console) with the
supplied SCART adapter to the TV scart socket.
C
Close the cover of the battery compartment.
Press the SOURCE button to select SCART mode.
Press the PLAY button on the external device.
HDMI INPUT
A
B
C
Connect the cable from the HDMI device to the TV
HDMI socket.
Press the SOURCE button to select HDMI mode.
Refer to the HDMI device user guide for how to
operate.
MOUNT YOUR TV ONTO THE WALL
You can mount your TV onto the wall by using a wall
bracket (not supplied). Use M4/M6 machine screws (4
pcs) to screw the TV onto the bracket (not supplied).
P.08
BATTERY CAUTION
Confirm there is no object between the remote control
and the remote sensor of the TV set.
Sunshine or other strong light will interfere with the
signal sent by the remote control. In this situation turn
the TV set to avoid the direct light source.
Do not put the remote control in direct heat or in a
damp place as you may damage the remote.
Please use two AAA 1.5V batteries. Do not mix battery
types. Install the batteries at the correct polarities. Do
not use rechargeable batteries. If your TV is to be stored
BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105
for a period of time, remove the batteries from the
remote control.
03 Getting Started
Setting up
If you have attached a DVD player or similar external
device to the TV, you will need to tell the TV to display
the content from it. Simply press SOURCE which will
bring up the source menu in the left corner of the
screen, use the and button to highlight the
required source and press OK select.
For details of how to plug in other equipment see GET
TO KNOW YOUR TV on page 5.
DTV
LOCATION
03 Getting Started
You will need to place your TV near your plug socket (so
the power cable can comfortably reach) and within reach
of your aerial socket or extension lead.
CONNECTION
A
B
Insert your TV aerial lead into the Antenna input at
the side of the TV.
Insert the batteries into the remote control. Make
sure they are inserted the right way around,
matching the polarity as indicated inside the battery
compartment.
AUTO SEARCH
A
Press MENU button.
SWITCHING YOUR TV ON
A
B
C
Press the button on the right side of the TV once.
A red flashing light will appear in the middle of the
screen.
Press on the remote control. The TV will turn on
and the red light will flash. This may take a few
moments.
Select your chosen language when prompted from
the list that will appear on screen. Use the button
to scroll to the language you want and press to
confirm.
TUNING YOUR TV
B
C
D
Press button to select Tuning menu, press button to enter.
Press button to select Country item.
Press button to select you needed.
Press button to select Auto Search item, press
OK button to enter.
Press button to select the OK option, and press
OK button to start searching.
Press the MENU button, you can choose to skip the
TV /DTV Search or not.
SWITCHING TO AN EXTERNAL
SOURCE OTHER THAT TV
BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105
P.09
Press EXIT button to exit.
Analog Manual Search
Follow the below steps when you need to have a manual
search.
A
E
Press MENU button.
Press EXIT button to stop auto search during
searching.
Note
O It may take a few moments to complete the Auto
Search.
DIGITAL MANUAL SEARCH
A
B
Press MENU button.
C
B
C
Press button to select Tuning menu, press
button to enter.
Press button to select Analog Manual Search
item, press button to enter.
Press button to select Tuning menu, press button to enter.
Press button to select Digital Manual Search
item, press button to enter.
D
E
Press button to select Search item, press
button is used to select the higher frequency
channel.
Press button is used to select the lower frequency
channel.
And then select Storage To, press button to
select the position number you want the channel
on. Once a channel is located, you can press red
button to save it. Press EXIT button to exit.
V Sound System
D
E
P.10
Press button to select “Sound System”, then
press button to select the correct sound system.
Press button to select the Channel.
Press OK button to start searching.
Once a channel is located, you can press OK button
to save it.
V Current CH
Press button to select the channel number to
BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105
edit.
V Storage To
Press button to select the program number you
want to storage to.
V Fine tune
If the picture and/or sound are poor, try using the
FINE TUNE feature. Do not use this feature unless
reception is poor.
A
B
Repeat above steps A-C, then press button to
select the Fine Tune item.
B
Press button repeatedly to carry out fine
tune, till the best picture and sound are obtained,
then loosen the button.
C
Press button to select the number position of
channel name. Press button to select number.
You can press the EXIT button to cancel the changes
at anytime.
O The RENAME function is only available in ATV
program.
Channel Edit
Using this function, you can rename, move, set favorite
channel and skip the channel in the analogue mode.
A
Press MENU button.
MOVE
A
B
C
B
C
Press button to select the number position you
want to remove to, press yellow button to confirm.
You can press the EXIT button to cancel the changes
at anytime.
Setting favourite channel
Press button to select TUNING menu, press button to enter.
Press button to select CHANNEL EDIT item.
Press button to enter the sub-menu. You can
press red, green, yellow or blue button to enter the
menu you need.
RENAME
A
Press button to select the channel and press
yellow button to select the position.
Press button to select the channel, and press
green button to rename.
A
B
C
D
Press button to select the channel, press red
button to set your favourite channel.
You can press the red button to cancel the changes
at anytime.
Press FAV button on the remote control and
Favourite List will be displayed.
Press button to select the channel, and press
OK button to enter.
SKIP
A
BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105
Press button to select the channel and press
blue button to skip the current channel.
P.11
03 Getting Started
Note
B
You can press the blue button to cancel the changes
at anytime.
GUIDE (Electronic Program Guide)
Using this function, you can access the DTV program
information.
A
Press MENU button.
Warning
t Switch off your TV before any module is inserted in
the Common Interface slot.
B
C
A
Press button to select TUNING menu.
Press button to enter.
Insert the CAM correctly, then Smart Card to the CI
slot that is located at the side of the TV.
CI Slot
Press button to select the guide item.
Press OK button to enter the submenu, the
electronic program guide is displayed.
You can quickly call up Guide menu by GUIDE
button on the remote control.
CAM
Smart Card
Note
O Only DTV mode.
B
COMMON INTERFACE
The common interface (CI) slot is designed to accept the
Conditional Access (CA) Module and Smart card in order
to view the pay TV programmes and additional services.
Contact your Common Interface service provider to get
more information about the modules and subscription.
Please noted that CA modules and smart cards are
neither supplied nor optional accessories from us.
P.12
C
D
Turn on the TV and it will display the below message
if the CA module is detected. Wait for few moments
until the card is activated.
Press the MENU button to display the Main Menu
and use the and button to highlight the “CI
information” line and press the “OK” button.
Detailed information on the CI card in use is
displayed.
BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105
E
F
Press OK button to access the card menu. Refer to
the module instruction manual for setting details.
B
When module is removed, the following message
will appear on the screen.
C
D
E
Press button to select TUNING menu, press button to enter.
Press button to select Software Upgrade item.
Press button to set it as On. (The default is Off )
The Start Upgrade item can be selected.(The default
is grey and cannot be selected).
Software Update function
13%
t When you get the updating news from the TV shop’s
web, you can update the operating software using
the Download menu. The data for various units are
transferred consecutively on a special receiving
channel.
F
Press button to select the Start Upgrade
option and use OK button to enter. Then the TV will
restart and search the upgrade information.
Note
O If the upgrade information is received, the TV will
begin to upgrade. Or else, the TV will be back the
DTV source.
G
Load the receiver identification. This process may
also take several minutes. You can press EXIT button
to cancel the download and your TV set will be back
the DTV source.
Note
O You can get information from the TV shop or
internet.
100%
Press EXIT to cancel download
Operation
A
Updating in progress - Do not turn off the TV
15%
Press MENU button.
BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105
P.13
03 Getting Started
t You need to search the channel with updating code
stream.
Press EXIT to cancel download
H
After the download has finished, your TV set will
enter burning state and the indicator light is shining.
The menu 4 of right appears.
The set will be back the DTV source when the update is
completed.
USING YOUR TV
B
How to select the TV program
A
B
Using Program number button Enter the channel
number with the number keypad on the remote
control.
Using P+/P- button.
Press the P+/P- button to select a channel number.
HOW to adjust volume
C
D
E
Press button to select Picture menu, press button to enter.
Press button to select the item requires
adjusting.
Press button to adjust the selection item.
When you are satisfied with your choice, press the
EXIT button to return to normal viewing or press
MENU button to return to the previous menu.
V Contrast
Press V+/V- button on the remote control or the side of
the TV to adjust the volume level.
This will adjust the intensity of bright parts in the
picture but keep the dark parts unchanged.
V Brightness
CH.LIST function
Press CH.LIST button on the remote control will display
Channel List menu, and then press button to enter.
Press button to select the channel, and then press
OK button to enter.
ADJUSTING PICTURE
SETTINGS
This will adjust the light output of the complete
picture, which will mainly affect the darker areas of
the picture.
V Colour
This will adjust the saturation level of the colours to
suit your personal preference.
V Sharpness
This will adjust the sharpness of fine details in the
picture.
V Tint
Allows you to select the colour mix (Tint) of the
picture.
Changing the Picture Setting
A
Press MENU button.
Note
O The Tint function is only available in NTSC mode.
V Mode
This will select the picture mode. Select Standard/
Mild/User/Vivid according to the program. You can
quickly select the desired mode by P.MODE button on
the remote control.
P.14
BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105
V Colour temperature
your listening position.
This will increase or decrease Warm (red) and Cool
(blue) colours to suit personal preferences.
Select Cool to give the white colour a blue tint,
Normal to give the white colour a neutral tint, Warm
to give the white colour a red tint.
V Noise Reduction
Automatically filters out and reduces the image noise
and improves picture quality when receiving weak
video signals.
Select Off/Low/Standard/High according to the
image noise.
V Reset
V Mode
This will select the sound mode.
Press button to select Standard/Music/Theater/
User according to the program. You can quickly select
the desired mode by S.MODE button on the remote
control.
V AVL (Automatic volume control)
This will reduces the differences in volume level
among broadcasters.
V SRS TS XT
This will control the Woofer output.
Press button to select SRS TS XT.
Press button to set SRS TS XT as OFF, ON.
To recover to the default value.
This will control the Digital Audio Output.
Press button to select Digital Audio Output.,
Press button to set Digital Audio Output. as OFF,
RAW , PCM.
SETTINGS
V Equalizer
Changing the Sound Setting
A
B
C
D
E
This sound setting can be adjusted to suit your
personal preference.
Press MENU button.
Press button to select Sound menu, press button to enter.
Press button to select the item requires
adjusting.
Press button to adjust the selection item.
When you are satisfied with your choice, press the
EXIT button to return to normal viewing or press
MENU button to return to the previous menu.
Press button to select Primary/Secondary item,
and then press button to select the languages
you needed.
Press button to select Close item, press OK button
to close it.
Menu
Balance
Mode
AVL
SRS TS XT
Digital Audio Output
OK
Equalizer
Audio Languages OK
Reset
OK
Picture
Sound
Tuning
Standard
Off
Off
Off
V Audio Languages
! 0
!
!
!
!
Menu
English
Function
Time
Lock
V Balance
This will adjust the output of the right and left
speakers to obtain the best stereo reproduction for
Balance
Mode
AVL
SRS TS XT
Digital Audio Output
2XWSXW
OK
Equalizer
OK
OK
Audio Languages
JHV OK
Reset
OK
OK
Picture
BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105
Sound
Tuning
Standard
Off
Off
Off
2II
! 0
!
!
!
!
English
(QJOLVK
Function
Time
Lock
P.15
03 Getting Started
V Digital Audio Output
ADJUSTING SOUND
Note
O The Audio Language function is only available
in DTV mode.
V Reset
t 4:3 mode
To recover to the default menu setting.
Choose 4:3 when you want to view a picture
with an original 4:3 aspect ratio, with gray bars
appearing at both the left and right sides.
FUNCTION SETTINGS
A
To set the picture proportion, press button to
select 4:3/Zoom1/Zoom2/Wide/16:9/Auto. You can
quickly select the desired mode by SCREEN button on
the remote control.
t 16:9 mode
Choose 16:9 when you want to adjust the picture
horizontally, in a linear proportion to fill the entire
screen.
Press MENU button.
t Zoom1
Choose Zoom1 when you want to view the picture
without any alteration. However, the top and
bottom portions of the picture will be cropped.
t Zoom2
B
Press button to select Function menu, press button to enter.
Choose Zoom2 when you want the picture to be
altered, both vertically extended and cropped.
The picture taking a halfway trade off between
alteration and screen coverage.
t Wide
Choose Wide when you want to adjust the picture
in a non-linear proportion, that is, more enlarged
at top sides and no alteration, at bottom side.
V Blue Screen
This will select the character background colour.
Note
O The Blue Screen function is only available for
ATV mode.
C
D
E
Press button to select the item requires adjusting.
Press button to adjust the selection item.
When you are satisfied with your choice, press the
EXIT button to return to normal viewing or press
MENU button to return to the previous menu.
V Language
To select the menu language.
V Subtitle Language
To select the Subtitle language.
V Recorder
To recorder the DTV program. Details of Recorder are
described in the page of 24 -26.
V SCART Input
The item is not able to be selected.
V OSD Time Out
To set how long you want the menus to appear
on-screen. Each press of button repeatedly to
select the number of preset minutes, the Time will be
set in sequence: off, 10sec, 15sec, 30sec, 45sec, 60sec.
V Display Mode
P.16
BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105
Menu
OK
OK
OK
OK
OK
Date
Month
Year
<OK 02 >
<OK 3
>
< 2009 >
Close
C
V OSD Transparency
To set the transparency background of OSD, the
transparency will be set in sequence: Off, 25%, 50%,
75%, 100%.
V Reset
O In DTV mode, because the time information is
from the signal, the Clock and Date are not able
to be changed.
If you want to change the time, turn off the TV in
ATV mode, then turn on the TV.
TIME SETTINGS
V Clock
V Off Time
Press MENU button.
Press button to select Time menu, press button to enter.
A
B
Menu
Press MENU button.
Press button to select Time menu, press button to enter.
Menu
OK
OK
Hour
Minute
OK
OK
OK
<OK
OK
<
02
03
Repeat
Hour
Minute
>
>
Close
C
Press button to select Clock item, press button to enter setting.
Press button to select hour or minute, press
button to adjust the value.
C
Press MENU button.
Press button to select Time menu, press button to enter.
<OK
<OK
<
Off >
00 >
00 >
Close
V Date
A
B
OK
OK
Press button to select Off Time item, press button to enter setting.
Press button to select Repeat option, and
then pressbutton to set it on.
Press button to select hour or minute, press
button to adjust the value.
When the off time has arrived, the TV set will
enter into standby mode.
V Sleep
The sleep timer automatically shuts off the TV after a
preset time (from 5 to 240 minutes).
BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105
P.17
03 Getting Started
Note
To recover to the default value.
A
B
Press button to select Date item, press button to enter setting.
Press button to select the option, and then
press button to adjust value.
A
Press the MENU button and then use button
to select the Time menu.
Menu
OK
OK
source volume and so on. Pressing MENU on the remote
control, press button to select Lock menu, press button to enter the sub-menu, and you will be required
to enter the password. The initial password of the
television is 0000. If you forget your password, you can
always input 9443 to regain control.
OK
Menu
OK
OK
B
C
D
Press the button and then use button to
select the Sleep.
Press the button and then use button
to select the number of minutes. Select Off, 5Min,
10Min, 15Min, 30Min, 45Min, 60Min, 90Min,
120Min, 180Min, 240Min.
V CHANGE PASSWORD
A
When you are satisfied with your choice, press
MENU button to return to the previous menu or
press the EXIT button to return to TV viewing.
And the time begins to count down from the
number of minutes selected.
Press button to select Change Password
item. Press button to enter the submenu.
Menu
OK
V Time Zone
A
OK
OK
Press MENU button.
Menu
OK
OK
OK
B
C
D
E
Press button to select Time menu, press button to enter.
Press button to select Time Zone item.
Press button to select the correct time zone.
Press MENU button to save and exit.
LOCK MENU
SETTINGS
Using this function can control the tuner, program,
P.18
B
When you have inputted the four digits you will
be prompted to enter it again.
Your new password will then be automatically
saved.
V CHILD LOCK
Press button to select Child Lock.
Press button to set On or Off mode. If lock on
mode is set, Child Lock is in activated automatically.
In such case, if Child Lock button (button on the
television) is pressed, the screen will display Child
Lock, which can be erased by press of MENU button.
5 seconds later after the latest press, the screen
display will disappear automatically. The Child Lock
mode can be resumed by entering Lock Set menu, set
Child Lock On or Off.
V Tuning Lock
Press to select Tuner Lock and to set On/Off.
BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105
(To set On, some operation such as search will be not
available. When enter the Tuning menu, Tuner Lock
will be on the screen. If you want to operate Tuning
menu, you need to enter the Lock menu to set Tuner
Lock Off or operate unlock.)
V Channel NO.
Channel NO. is opted for setting up preset channel.
Press button to select preset Channel. Press button to select channel number.
V Clear Lock
Press button to select Unlock mode. Press button to unlock all set modes, setting all lock options
to off, and the maximum volume returns to 100.
SHORTCUT MENU
DISPLAY
V Source set
V Subtitle Function
A
V Source Lock
Source Lock will control the On or Off of hinder
external input modes.
Press button to set as on or off.
When the source lock is set as on, TV source will
display, at this time, when press SOURCE button,
the TV can switch to corresponding source and will
display the Source is locked.
B
Press SUBTITLE button on the remote control will
display Subtitle languages menu, press button
to enter.
Press button to select the item and press OK
button to enter. You can press the EXIT button to
cancel the changes at anytime.
Menu
Note
OK
O Press SUBTITLE button on the remote, it will
display subtitle languages menu only in the DTV
mode.
OK
V CH.LIST Function
A
Press CH.LIST button on the remote control, will
display Channel List menu.
V Max Volume
Press button to select Max Volume. Press button for adjustment between 0-100. If a certain
Value is set, when volume is being adjusted, the
sound value can not exceed maximum volume value.
If current volume is over Max Volume, when lock set
menu is set, current volume will become set maximum
volume, if current volume is below maximum volume,
customer set volume will stay unchanged.
V Initial Volume
The TV will remember it after your setting, that will be
the volume when turn on the TV next time.
V Parental Lock
B
Press button to select parental lock. Press button to select OFF or 4-18 to limit the age of
children who will watch TV.
BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105
Press button to select the channel and press
OK button to enter. You can press the EXIT button
to cancel the changes at anytime.
P.19
03 Getting Started
Channel set is opted for setting up start source.
Press button to select Off, DTV, TV, SCART ,
Component, PC, HDMI1, HDMI2, HDMI3, USB in turn.
DVD is available for some model.
V GUIDE Function
Press GUIDE button on the remote control, will
display Program Guide menu, press button
to select the program.
You can press the EXIT button to cancel the changes
at anytime.
Note
O Press AUDIO button on the remote, it will
display Audio Languages menu only in the DTV
mode.
V Eliminate Sound
Note
O Available only in the DTV mode.
V FAV Function
Press FAV button on the remote control, will display
Favourite List menu.
Press button to select program and press OK
button to enter. You can press the EXIT button to
cancel the changes at anytime.
When you need to pay attention to surrounded
sounds, or there is a telephone calling you
or there are some guests visiting you, the sound
elimination (mute) function is very convenient.
A
B
Press the MUTE button on the remote control and
“Mute” type face will display on the lower part of
the screen. At this Time, the sound of the TV set is
turned off.
If you want to recover the sound, press the MUTE
button again or directly press V+ button.
V Quick program view
This function enables quick swap to the last watched
program. Press Q.view button, and the TV will be back
to the TV source, expect in the USB and DVD source.
V INFO
Press INFO button on the remote control, will display
the current channel information.
You can press the EXIT button to cancel the changes
at anytime.
A
Suppose the channel number you used just now
is 8 and the channel number you are using is 18
(as shown in the figure).
V AUDIO/I/II
Press AUDIO button on the remote control, will
display Audio Languages menu.
Press button to select the desired settings and
press OK button to enter.
You can press the EXIT button to cancel the changes
at anytime.
P.20
BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105
t Mute function
V Page up/down
Use the P+/P- buttons to browse next or previous
page.
To select a Teletext page, enter the page number
using the numeric key pad on the remote control,
or use the P+ or P- buttons, or the coloured Fast text
buttons.
B
C
If you want to return to the last watched program
channel 8, you can simply press the Q.View button.
If you want to return to channel 18, press the
button again. Use this function, you can easily
change between the channel you are using and
the channel you used last Timer.
04 Using the features
Teletext functions
Teletext is an information system, broadcast by certain
channels, which can be read like a newspaper. It also
provides subtitles for people with hearing difficulties or
those who are unfamiliar with the language in which a
particular program is being broadcast (cable networks,
satellite channels, etc.).
V Mix mode
04 Using the features
V Page number entering
To view the TV picture while in Text mode press the
button, this will superimpose the Teletext data on top
of the TV picture. Press this button again to return to
Full text.
V INDEX
Press the INDEX button to go to the index page of
teletext.
Note
O The teletext buttons could be working even if
there is no teletext signal, but there is no teletext
display.
Teletext
V Language change
Pressing the
button will change the Teletext
characters between Eastern and Western.
V Teletext functions
To select “teletext” press the
button on the
handset. To switch off teletext, press the button
again. “Note all menu functions are not available
in teletext mode”. Only a few direct button control
functions are available in teletext mode, they are:
t Volume adjustment
V Hold
Pressing the button will stop the teletext page
automatically updating. This feature is very useful
where there are several teletext pages or data on the
same page number.
BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105
P.21
and only for your reference. Please see the actual
product if necessary.
V Size
Pressing the button changes between full screen top
half bottom half full screen. This feature is very useful as
it magnifies the image making the characters easier to
read.
TO USE THE USB DEVICE
A
t
t
t
t
V Reveal
Photo: *.jpg;
Music: *.mp3 files;
Movie: *.avi files;
TEXT: *.txt
Note
Pressing the
button will reveal hidden text. This
feature is used to reveal information such as answers to
Teletext on-line interactive puzzles.
O Due to the particularity of file cording, some files
may be unable to read.
B
V Time
While in normal TV mode only, pressing the button
will display the teletext time in the top right hand corner
for a few seconds.
C
Supported equipment:
Support the equipment that supports Mass Storage
Protocol and whose file system is FAT32, such
as some USB disks, mobile harddisks, and MP3
player. If USB equipment could not be identified
due to unsupported file system, please format the
equipment to the above-mentioned file system.
To achieve smooth playing, ensure the following:
t The file code rate should be lower than 300KB/S;
t Due to the limitation of USB signal transmission
distance, it is recommended not to use USB patch
cord, in case of using the cord, make sure that its
length is not over 1m;
t Use high-speed USB equipment in conformity
with USB2.0 full speed Interface Standard; If USB
equipment in conformity with USB1.1 full speed
Interface Standard is used, the playing may be
unsmooth.
V Fast text coloured buttons
Fast text automatically displays the four most commonly
used pages that the broadcaster thinks that you may
want to choose next. Press the same coloured button on
the remote control as the coloured link at the bottom of
the teletext page to go directly to that page.
When connecting/removing the USB
device
V Subcode
Pressing the button by entering its 4-digit number to
enter a secondary page.
A
B
C
USB MODE
Note
O The diagrams in the following section are schematic
P.22
Supported file formats:
D
Press “SOURCE” on the remote control unit to select
USB option.
Insert USB equipment into corresponding USB
interface 2s after starting the system.
After entering the system menu, press “/“ on the
remote control unit to select the require USB files,
press “OK” button to confirm the selection and enter
the file list relative to the selection.
Press “/“ on the remote control unit to select the
required file, press “OK” button to enter the selected file.
BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105
E
To exit the streaming media playing system and
watch a TV program, you must press “BACK” button
to return to the streaming media main menu at first
(to protect equipment), and then press “SOURCE” to
select “TV” to return to the TV mode.
picture file list.
Note
Q Under source of USB, when press button MENU,
screen goes black, except when images or movies
are being played.
C
D
Q Please do not unplug the USB device when the
connected USB storage device is working. When such
device is suddenly separated or unplugged, the stored
files or the USB storage device may be damaged.
Operating the USB device
A
B
C
D
E
F
Press “/“ to scroll through main menu or
submenu and select your desired option.
E
Press “/“ to select the picture you want to play,
press ”OK“ to confirm, and then press “PLAY/PAUSE”
button to play the pictures.
If you want to pause the picture which is being
palyed, press the PALY/PAUSE button again.
Press ”ZOOM“ to magnify the picture. When the
picture is enlarged, press “/“ and “/“ to
move the picture.
Press “PREV/NEXT“ to select the last or next picture.
Press “/“ to rotate the picture.
Press “STOP” to stop the picture being played.
To exit playing, just press “BACK” repeatedly.
Note
Press “OK” to confirm your selection.
O The menu display varies with the photo name and
pixel in your equipment.
Press “/“ to achieve the FWD (fast forward) and
REV (fast back) of the option being played.
Press “PLAY/PAUSE” to play, and press it again to
pause playing.
Playing Music
Press “ZOOM” to magnify pictures; when the picture is
enlarged, press “/“ and “/“ to move the picture.
A
Press “STOP“ to stop playing, or return to the
previous menu, and press “BACK” repeatedly to
return to the main menu.
B
After entering USB main interface, press “/“ to
select “MUSIC”.
Press ”OK“ to confirm the selection and enter the
music file list.
Note
O You can choose the photos or music in different
files to play together.
Playing a Picture
A
B
After entering USB main interface, press “/“ to
select “PHOTO” item.
Press ”OK“ to confirm the selection and enter the
BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105
P.23
04 Using the features
Q While playing the USB, press “BACK” button
repeatly, the screen picture will return to USB
main interface, and only at this time you can
switch corresponding signal sources by pressing
“SOURCE” again.
C
D
Press “/“ and “OK” button to select the music
you want to play, then press “PLAY/PAUSE“ button
to play the music.
Press “/“ to achieve the REV (fast back) and FWD
(fast forward) of the music being played.
Press “PREV/NEXT “ to select the last or next music.
Press “STOP“ to stop the music being played,
when the current interface is the music being
played.
B
Press “OK” to confirm the selection and enter the
text file list.
To return to the main menu, just press “BACK”
repeatedly.
C
Note
O You can enjoy the music and the picture at the
same time.
D
Playing a Movie
Press “/” and “OK” button to select the text you
want to play, and then press “PLAY/PAUSE” button
to play the text.
Press “PREV/NEXT “ to select the last or next text.
To exit the “Text” mode, just press “BACK” repeatedly.
Note
A
B
Atter entering USB main interface, press “/“ to
select “Movie”.
Press “OK” to confirm the selection and enter the
movie file list.
O You can enjoy the music and the text at the same
time.
Using External USB
Disk For Recording
A
C
D
Press “/“ and “OK” button to select the movie
you want to play, and then press “PLAY/PAUSE”
button to play the movie.
Press “ZOOM” to magnify the picture.
Press “PREV/NEXT “ to select the last or next movie.
Press “STOP“ to stop the movie being played.
To exit playing, just press “BACK” repeatedly.
B
Text
A
P.24
Insert the USB device with FAT32 format into the
USB connector. Then, press MENU button.
C
After entering USB main interface, press “/“ to
select “Text” .
D
Press button to select FUNCTION menu, press
button to enter .
Press button to select Recorder. Press OK
button to enter the submenu.
Press button to Select Disk and press or OK
button to enter. Press button to select disk if
BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105
your device has several disks.
E
O The minimum device size for record is 1GB. Provide
device formatting function is up to 2TB. The max
Multi-Partition is 16 partitions and one is active at
a time.
Press button to select Format and press to
enter. Press button to select the size you want
to format. Press OK button to format the USB Disk.
O Bit rate:
t Device bit-rate>4.5MB/s REC is safe at HD
stream
t Device bit-rate>1.5MB/s REC is safe at SD
stream
t Device bit-rate<600KB/s REC is bad for REC
O The system can not work normally if the USB
device have the listing problem below:
t The device has bug.
t The device has error block.
t The device reports the unfaithful size.
Note
O The system will format the whole device and if your
device size is bigger than 1GB, you can set the size
which is used for time shift.
Format may take several minutes and the time is
depending on the memory size. Press button
to select the Time Shift Disk Size. The max device size
for Time Shift is 8GB. Then, press OK button to save.
t USB device should be format as FAT32 format by
your PC before insert to the USB connector.
TIME SHIFT
Time Shift function is only available in DTV mode. Press
PLAY/PAUSE to pause the program, and press PLAY/
PAUSE again, the time shift program will be played. If
you want to stop time shift function, press the STOP
button.
You can stop the time shift program being played by
pressing the EXIT button.
Note
O If you select all the size format for time shift, you
can not do any recording.
G
Waiting for the system checking. And you can see
the speed data after the success checking.
RECORDING
A
Press D.MENU button to record the program being
played, and press D.MENU or EXIT button to make
the recording interface minimum.
Note
O Only have to format when you use the device for
record for the first time.
BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105
P.25
04 Using the features
F
IMPORTANT
05 Reference Sections
TROUBLESHOOTING
B
C
Press STOP button to stop the program recording
being played.
For Playback the recorded program. Press INDEX
button to open the recorded list.
Press button to select the content you recorded.
Press the button to display the program
information.
Press button to cancel.
Press OK or PLAY/PAUSE button to play the
program recorded and press STOP button to stop it.
Note
O Changing the channel will not influence the
recording in the same frequency, but will influence
the time shift. When the recorded program is being
played, you can not delete it.
O Press the INDEX button repeatedly, the program
will be displayed in the order of program name,
channel name, program time, file name and file
length.
P.26
„ To assist in location of possible faults use the help
guide below:
No picture, no
sound
Verify if the television is
properly plugged in.
Verify if the television has a
proper supplied power source.
Verify if electricity is available.
Blank screen
Verify if correct signals are
input.
Operate the remote to change
signal input to correct input.
Restart the television if power
supply is interrupted.
No sound
Press MUTE button and verify if
Mute mode is set.
Switch to other channel and
verify if the same problem
happens.
Press VOL+ button to see if the
problem can be solved.
Poor sound
Verify if sound system is correct.
Refer to user‘s manual for
adjustment.
No picture in
some channel
Verify if correct channel is
selected.
Adjust the antenna.
No color for
some channel
program
(black and
white)
Verify if the same problem exists
in other channels.
Check out of picture and sound
systems.
Refer to relative instructions
in the Manual for color
adjustment.
Spots with
some or all
pictures
Verify if the antenna is correctly
connected.
Verify if the antenna is in good
condition.
Make fine adjustment of
channel.
BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105
Power
consumption
See rating plate
Dimensions (W
× D × H) cm
102.0 × 29.0 × 72.4
(including base) (LED40T3)
79.1 × 21.0 × 56.6
(including base) (LED32T3)
Environment
conditions
Working temperature:
+5 °C - +35 °C
Working humidity:
20% - 80%
Storage temperature:
-15 °C - +45 °C
Storage humidity:
5% - 90%
Accessory
User manual
Remote control
Base cover
Quick start guide
Battery (×2)
Note
O If the fault can not be repaired using the above
guide consult with your local authorized service
centre.
O The TV set must only be repaired by a qualified
registered service person. Never attempt to
remove the back cover as the TV set has dangerous
voltages in side that may cause a fatally or fire.
Specification
SCREEN SECTION
Type
A-si TFT active matrix
Viewable angle
176 (H) 176 (V)
Colour system
PAL, SECAM, NTSC
(AV)
* The part specifications of this TV set provided here are
for reference only.
Differences may occur as product technology is
updated.
Design and specifications are subject to change
without notice.
05 Reference Sections
Television out
of control
Disconnect the television from
power supply and 10 seconds
later, connect the television
to the power supply. If the
problem still exists, contact
authorized after-sales service
for technical assistance.
TV/VIDEO SECTION
Sound system
BG, DK, I, L
Video input
SCART, YPb/Pr, YCb/Cr,
PC, HDMI, USB
GENERAL SECTION
DTV Y/Pb/Pr
Component: 480i/p, 576i,
720p, 1080i, 1080p
Power
See rating plate
BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105
P.27
06 Product Guarantees
PRODUCT GUARANTEE
This product is guaranteed against manufacturing defects for a period of
Year
This product is guaranteed for twelve months from the date of original purchase. Any
defect that arises due to faulty materials or workmanship will either be replaced,
refunded or repaired free of charge where possible during this period by the dealer
from whom you purchased the unit.
The guarantee is subject to the following provisions:
- The guarantee does not cover accidental damage, misuse, cabinet parts, knobs
or consumable items.
- The product must be correctly installed and operated in accordance with the
instructions contained in this manual.
- It must be used solely for domestic purpose.
- The guarantee will be rendered invalided if the product is re-sold or has been
damaged by inexpert repair.
- Specifications are subject to change without notice.
- The manufacturer disclaims any liability for the incidental or consequential damages.
- The guarantee is in addition to, and does not diminish your statutory or legal rights.
- In the event of a problem with the product within the guarantee period call the
customer helpline on 0845 604 0105
Guarantor: Argos Ltd
489 - 499 Avebury Boulevard
Central Milton Keynes
MK9 2NW
BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105
P.28
0090509580
Download PDF