Belkin | F5D7011 | User manual | Belkin F5D7011 User manual

High-Speed Mode
Wireless G Notebook
Network Card
Connect your laptop computer to
a FASTER wireless network
User Manual
F5D7011
Table of Contents
1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Advantages of a Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . . 1
Placement of your Wireless Networking Hardware for
Optimal Performance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Applications and Advantages . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Product Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
5
6
6
7
7
3 Installing and Setting Up the Card . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Step 1: Install the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Step 2: Plug the Card in an Available CardBus
Slot of your Laptop. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Step 3: Let Windows Finish the Installation . . . . . . . . . . . . . . . . . 10
4 Using the Belkin Wireless LAN Utility . . . . . . . . . . . . . . . . . . . . . . .
Setting Wireless Network Preferences . . . . . . . . . . . . . . . . . . . . .
Securing your Wi-Fi Network . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Monitoring the Status of your Network Connection. . . . . . . . . . .
Monitoring Data Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Finding Available Networks in your Area . . . . . . . . . . . . . . . . . . .
Performing Diagnostic Tests on your Connection . . . . . . . . . . . .
12
13
16
28
30
31
32
5 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
6 Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Introduction
Advantages of a wireless network
•
Mobility – you no longer need a dedicated “computer room”—
you can work on a networked laptop or desktop computer
anywhere within your wireless range
•
Easy installation – Belkin Easy Installation Wizards make
setup simple
•
Flexibility – set up and access printers, computers, and other
networking devices from anywhere in your home
•
Easy Expansion – the wide range of Belkin networking products
let you expand your network to include devices such as printers
and gaming consoles
•
No cabling required – you can spare the expense and hassle of
retrofitting Ethernet cabling throughout the home or office
•
Widespread industry acceptance – choose from a wide range
of interoperable networking products
1
1
2
3
4
5
6
7
8
9
10
section
Thank you for purchasing the Belkin High-Speed Mode Wireless G
Notebook Network Card (the Card). Now you can take advantage
of this great new technology without using cables. The High-Speed
Mode Wireless G Notebook Network Card works like a conventional
network card, but without the wires. The easy installation and setup
will have you networking wirelessly in minutes. Please be sure to read
through this User Manual completely, and pay special attention to the
section entitled “Placement of your Wireless Networking Hardware for
Optimal Performance”.
Introduction
Placement of your Wireless Networking Hardware for
Optimal Performance
Your wireless connection will be stronger the closer your computer
is to your Wireless Router (or Access Point). Typical indoor operating
range for your wireless devices is between 100 and 200 feet. In the
same way, your wireless connection and performance will degrade
somewhat as the distance between your Wireless Router (or Access
Point) connected devices increases. This may or may not be
noticeable to you. As you move further from your Wireless Router
(or Access Point), connection speed may decrease. Factors that can
weaken signals simply by getting in the way of your network’s radio
waves are metal appliances or obstructions, and walls.
If you have concerns about your network’s performance that might
be related to range or obstruction factors, try moving the computer
to a position between five and ten feet from the Wireless Router (or
Access Point), in order to see if distance is the problem. If difficulties
persist even at close range, please contact Belkin Technical Support.
Note: While some of the items listed below can affect network
performance, they will not prohibit your wireless network from
functioning; if you are concerned that your network is not operating
at its maximum effectiveness, this checklist may help.
1.
Placement of your Wireless Router or Access Point
Place your Wireless Router (or Access Point), the central connection
point of your network, as close as possible to the center of your
wireless network devices.
To achieve the best wireless network coverage for your “wireless
clients,” (i.e. computers enabled by Belkin Wireless Notebook
Network Cards, Wireless Desktop Network Cards, and Wireless
USB Adapters):
•
Ensure that your Wireless Router (or Access Point) antennas
are parallel to each other, and are positioned vertically (toward
the ceiling). If your Wireless Router (or Access Point) itself is
positioned vertically, point the antennas as much as possible in
an upward direction.
•
In multistory homes, place the Wireless Router (or Access Point) on a
floor that is as close to the center of the home as possible. This may
mean placing the Wireless Router (or Access Point) on an upper floor.
•
Try not to place the Wireless Router (or Access Point) near a
cordless 2.4GHz phone.
2
Introduction
Avoid Obstacles and Interference
Avoid placing your Wireless Router (or Access Point) near devices
that may emit radio “noise”, such as microwave ovens. Other objects
that can inhibit Wireless communication can include:
•
Refrigerators
•
Washers and/or dryers
•
Metal cabinets
•
Large aquariums
•
Metallic-based UV tinted windows
2
3
4
If your wireless signal seems weak in some spots, make sure that
objects such as these are not blocking the signal’s path between your
computers and Wireless Router (or Access Point).
3.
1
Cordless Phone Placement
If the performance of your wireless network is impaired after
attending to the above issues, and you have your cordless phone:
•
Try moving cordless phones away from Wireless Router or
Access Point and your wireless-enabled computers
•
Unplug and remove the battery from any cordless phone
that operate on the 2.4GHz band (check manufacturers
information). If this fixes the problem, your phone may
be interfering.
•
If your phone supports channel selection, change the
channel on the phone to the furthest channel from your
wireless network, as possible. For example, change the
phone to channel 1 and move your Wireless Router (or
Access Point) to channel 11. See your phone’s user manual
for detailed instructions.
•
If necessary, consider switching to a 900MHz or 5GHz
cordless phone.
4. Choose the “quietest” channel for your wireless network
In locations where homes or offices are close together, such as
apartment buildings or office complexes, there may be wireless
networks nearby that can conflict with yours. Use the Site Survey
capabilities of your Wireless LAN Utility to locate any other wireless
3
5
6
7
8
9
10
section
2.
Introduction
networks, and move your Wireless Router (or Access Point) and
computers to a channel as far away from other networks as possible.
Experiment with more than one of the available channels, in order to
find the clearest connection and avoid interference from neighboring
cordless phones or other wireless devices.
Use the detailed Site Survey and wireless channel information
included in your User Guide for more information.
5.
Secure connections, VPNs, and AOL
Secure connections are connections that typically require a user
name and password, and are used where security is important.
Secure connections include:
•
Virtual Private Network (VPN) connections, often used to connect
remotely to an office network
•
The “Bring Your Own Access” program from America Online
(AOL), which lets you use AOL through broadband provided by
another cable or DSL service
•
Most on-line banking websites
•
Many commercial websites which require a username and
password to access your account
Secure connections can be interrupted by a computer’s power
management setting, which causes it to “go to sleep.” The simplest
solution to avoid this is to simply reconnect by re-running the VPN or
AOL software, or by re-logging into the secure web site.
A second alternative is to change your computer’s power management
settings so it does not go to sleep; however, this may not be appropriate
for portable computers. To change your power management setting
under Windows, see the “Power Options” item in the Control Panel.
If you continue to have difficulty with Secure Connection, VPNs and
AOL please review steps 1-4 above to be sure you have addressed
these issues.
These guidelines should allow you to cover the maximum possible area
with your Wireless Router. Should you need to cover an even wider
area, we suggest Belkin’s Wireless Range Extender/Access Point.
For more information regarding our networking products, visit our
website at www.belkin.com/networking or call Belkin Technical Support.
4
Overview
1
Product Features
•
2.4GHz ISM (Industrial, Science, and Medical) band operation
•
Integrated easy-to-use Wireless Configuration Utility
•
CardBus interface, for operation in virtually any notebook computer
•
WPA, 64-bit WEP (Wired Equivalent Privacy), or 128-bit encryption
•
Wireless access to networked resources
•
Support for both Infrastructure and Ad-Hoc (peer-to-peer)
networking modes
•
Easy installation and use
•
Internal antenna
•
LED power and network link indicators
2
3
4
5
6
7
8
9
10
*When operating in High-Speed Mode, this Wi-Fi device may achieve an actual throughput
of up to or greater than 34.1 Mbps, which is the equivalent throughput of a system
following 802.11g protocol and operating at a signaling rate of 125 Mbps. Actual throughput
will vary depending on environmental, operational and other factors.
5
section
The Card complies with the IEEE 802.11g standard in order to
communicate with other 802.11g-compliant wireless devices at
54Mbps or the faster 125 High-Speed Mode (HSM)*. The card
is compatible with all 802.11g devices as well as other 802.11b
products at 11Mbps. 802.11g products operate on the same 2.4GHz
frequency band as 802.11b Wi-Fi products.
Overview
Applications and Advantages
•
Wireless roaming with a laptop around the home or office
Offers the freedom of networking without cables
•
Connection rates of up to 54Mbps or 125Mbps* using HSM
provides immediate, higher-speed wireless connectivity at home,
work, and hot spot locations without compromising the use of
existing 802.11b products
•
Compatibility with 802.11b products
802.11g wireless LAN solutions are backward-compatible with
existing Wi-Fi (IEEE 802.11b) products and with other products
that display the 54g mark and/or 125HSM mark
•
Difficult-to-wire environments
Enables networking in buildings with solid or finished walls, or
open areas where wiring is difficult to install
•
Frequently changing environments
Adapts easily in offices or environments that frequently rearrange
or change locations
•
Temporary LANs for special projects or peak time
Sets up temporary networks, (such as at trade shows, exhibitions
and constructions sites), on a short-term basis; also companies
who need additional workstations for a peak activity period.
•
SOHO (Small Office/Home Office) networking needs
Provides the easy and quick, small network installation SOHO
users need.
Product Specifications
Host Interface
32-bit Cardbus
Power Consumption
Tx/Rx peak 550/350mA @
3.3 VDC(max)
Operating Temperature
32 –185 degrees F (0 –85 degrees C)
Storage Temperature
-40 –194 degrees F (-40 – 90 degrees C)
Humidity
(Max. 95% (non-condensing)
Typical Operating Range
Up to 200 feet (Wireless performance
may vary depending on the
networking environment)
*When operating in High-Speed Mode, this Wi-Fi device may achieve an actual throughput
of up to or greater than 34.1 Mbps, which is the equivalent throughput of a system
following 802.11g protocol and operating at a signaling rate of 125 Mbps. Actual throughput
will vary depending on environmental, operational and other factors.
6
Overview
(b)
1
2
3
4
(c)
5
6
(a) Power LED
Lights up when the Card receives power
(b) Link LED
Lights up when the Card links to a wireless network
Slowly flashes when not linked to a wireless network
(c) Card Connector
Part of the Card that fits into your computer’s
CardBus slot
System Requirements
•
•
PC-compatible laptop with one available CardBus slot
Windows ® 98SE, Me, 2000, XP
Package Contents
•
High-Speed Mode Wireless G Notebook Network Card
•
Quick Installation Guide
•
Installation Software CD
•
User Manual
7
7
8
9
10
section
(a)
Installing and Setting up the Card
Step 1
Install the Software
WARNING: INSTALL THE SOFTWARE BEFORE INSERTING THE CARD.
1.1 Insert the Installation Software CD into your CD-ROM drive.
1. 2 The Belkin Setup Utility will automatically appear.
Note: If the Setup Utility screen does not appear within 20 seconds,
open your CD-ROM drive by double-clicking on the “My Computer”
icon and insert the CD. Double-click on the CD-ROM drive that the
installation CD has been placed in to start the installation. Then,
double-click on the folder named “Files”. Next, double-click on the
icon named “setup.exe”.
1.3 In the menu window, drag your mouse over the “Install” button
then select “Click here” to start the software installation program.
8
Installing and Setting up the Card
1.4 The installer will now start. Click
“Next” and follow the
on-screen instructions.
1
2
4
Step 2
Plug the Card in an Available CardBus Slot of your Laptop
5
6
2.1 During the install process, you
will be prompted to insert your
Card. Insert the Card, label side
UP, into your computer’s CardBus
slot firmly until it stops. The power
light on the top will turn on when
it is inserted properly.
Note: If your system did not
prompt you to insert your Card
after the installation is completed,
please do so now.
2.2 After the installation is complete,
click “Finish”.
9
7
8
9
10
section
3
Installing and Setting up the Card
Step 3
Let Windows Finish the Installation
3.1 Depending on the version of
Windows you are using, you
might see the “Found New
Hardware Wizard” screen.
Select “Install the software
automatically (Recommended)”
and click “Next”.
3.2 You might also see a screen
similar to this one. This DOES
NOT mean there is a problem.
Select “Continue Anyway” and
follow the on-screen instructions.
3.3 If you are using Windows 98SE
or Me, you will be asked to restart
your computer. If you
are using Windows 2000 or
XP, click “Finish” to finish the
installation process.
3.4 When the installation is
complete, a small Signal
Indicator icon in your system
tray (bottom right corner of
most screens) will appear.
Double-click the Signal
Indicator icon to bring up the
Wireless Network” screen.
10
Installing and Setting up the Card
3.5 Select the network you want
to connect to under “Available
networks” and click “Connect”.
1
2
4
5
3.6 The Signal Indicator icon in
your system tray should now
turn green (yellow if the signal
is weak.)
Installation is now complete!
6
7
8
9
10
11
section
3
Using the Belkin Wireless LAN Utility
How to Access the Belkin Wireless LAN Utility
Double-click the Signal Indicator icon to bring up the “Wireless
Network” screen.
The following screen will appear:
Next, click on the “Advanced” button to enable the Belkin Wireless
LAN Utility. This utility will allow you to view and configure the
wireless settings of your card.
12
Using the Belkin Wireless LAN Utility
1
Setting Wireless Network Preferences
Click on the “Wireless Networks” tab.
2
(a)
3
(c)
(d)
(i)
4
(j)
5
(e)
(k)
(f)
(g)
(h)
(m)
(l)
6
7
8
9
(a) Enable Radio
Use this option to turn your wireless network radio ON or OFF. You
may want to turn the radio off while in airplanes or to conserve the
battery life of your mobile computer. When the radio is disabled, the
power LED on your Card will turn off and the system tray wireless
network icon will be depicted with an “X”.
(b) Available Networks
This displays a list of wireless networks in your area. If you don’t see
a name in the box, click on the “Refresh” (j) button to rescan for any
available networks. To connect to a network, select a network name in
the Available Networks list box and click the “Configure” (i) button
Click “OK” (m) in the “Wireless Network Properties” box to add the
network name to the “Preferred Networks” (c) list. Wait up to one
minute for the network connection to be made. Your computer is
(d)
connected to the selected network when you see a blue bubble
on top of the icon for that network.
(c) Preferred Networks
Displays a list of the networks that you have previously configured.
(d) is the network you are currently
The one with the blue bubble
connected to. You may rank the networks by selecting the network
13
10
section
(b)
Using the Belkin Wireless LAN Utility
name in the “Preferred Networks” list then clicking on the “Move Up”
and “Move Down” (k) buttons. Networks appearing higher on the list
will be preferred over networks listed lower on the list. If a preferred
network is unavailable, the Card will attempt to connect to the next
available network on the list.
(e, f) Add, Remove
You may “Add” (e) and “Remove” (f) networks from the Preferred
Networks list by using these buttons.
(g) System Tray Icon
Check this box so that the wireless icon appears on your system tray.
(h) Properties
To change the properties and WEP (security) settings of a network,
select a network from the Preferred Networks (c) then click on the
“Properties” (h) button.
(l) Advanced
Allows you to select the type of networks you want to connect to.
When the “Advanced” (l) button is checked, the screen on the next
page will appear.
(a)
(b)
(i)
(c)
(j)
(d)
(e)
(k)
(h)
(f)
(g)
(l)
14
Using the Belkin Wireless LAN Utility
1
2
3
Any Available Network (access point preferred)
5
When this option is selected, the Card will attempt to connect to any
available network in the area. Access point networks will be preferred
over ad-hoc networks. Access Point (Infrastructure) networks only
mode allows you to connect to the Internet by accessing the wireless
router or wireless access point or your network
6
Access Point (Infrastructure) Networks Only
8
When this option is selected, the Card will attempt to connect to
any available wireless router or access point in the area. Ad-Hoc
networks will be excluded from the list of available networks when
this option is selected.
9
Computer-to-Computer (Ad-Hoc) Networks Only
When this option is selected, the Card will attempt to connect to any
available computer in the area that’s also configured to be used in
Ad-Hoc mode. The wireless router or access point will be excluded
from the list of available networks when this option is selected.
15
7
10
section
4
Using the Belkin Wireless LAN Utility
Securing your Wi-Fi® Network
Here are a few different ways to maximize the security of your wireless
network and protect your data from unwanted intrusion. This section
is intended for the home, home office, and small office user. At the
time of publication, three encryption methods are available.
Encryption Methods:
Name
64-bit Wired
128-bit
Equivalent Privacy Encryption
Wi-Fi
Protected
Access
Wi-Fi
Protected
Access
Acronym
64-bit WEP
128-bit WEP
WPA-TKIP
WPA-AES
Security
Good
Better
Best
Best
Features
Static keys
Static keys
Dynamic key
encryption
and mutual
authentication
Dynamic key
encryption
and mutual
authentication
Encryption keys
based on RC4
algorithm (typically
40-bit keys)
Added security
over 64-bit
WEP using a
key length of
104 bits, plus
24 additional
bits of systemgenerated data
TKIP (temporal
key integrity
protocol)
added so
that keys are
rotated and
encryption is
strengthened
AES
(Advanced
Encryption
Standard)
does not
cause any
throughput
loss.
WEP (Wired Equivalent Privacy)
WEP (Wired Equivalent Privacy) is a common protocol that adds
security to all Wi-Fi-compliant wireless products. WEP gives wireless
networks the equivalent level of privacy protection as a comparable
wired network.
64-Bit WEP
64-bit WEP was first introduced with 64-bit encryption, which
includes a key length of 40 bits plus 24 additional bits of systemgenerated data (64 bits total). Some hardware manufacturers refer
to 64-bit as 40-bit encryption. Shortly after the technology was
introduced, researchers found that 64-bit encryption was too easy
to decode.
16
Using the Belkin Wireless LAN Utility
128-Bit Encryption
As a result of 64-bit WEP’s potential security weaknesses, a more
secure method of 128-bit encryption was developed. 128-bit
encryption includes a key length of 104 bits plus 24 additional bits of
system-generated data (128 bits total). Some hardware manufacturers
refer to 128-bit as 104-bit encryption.
2
3
4
5
Encryption Keys
After selecting either the 64-bit WEP or 128-bit encryption mode, it is
critical that you generate an encryption key. If the encryption key is
not consistent throughout the entire wireless network, your wireless
networking devices will be unable to communicate with one another.
You can enter your key by typing in the hex key. A hex (hexadecimal)
key is a mixture of numbers and letters from A–F and 0–9. For 64-bit
WEP, you need to enter 10 hex keys. For 128-bit WEP, you need to
enter 26 hex keys.
For instance:
6
7
8
9
10
AF 0F 4B C3 D4 = 64-bit WEP key
C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit key
Write down the hex WEP key from your wireless router or access
point and enter it manually into the hex WEP key table in your Card’s
configuration screen.
17
section
Most of the new wireless equipment in the market today supports
both 64-bit WEP and 128-bit WEP encryption, but you might have
older equipment that only supports 64-bit WEP. All Belkin wireless
products will support both 64-bit WEP and 128-bit encryption.
1
Using the Belkin Wireless LAN Utility
WPA (Wi-Fi Protected Access)
WPA (Wi-Fi Protected Access) is a new Wi-Fi standard that improves
upon the security features of WEP. To use WPA security, the drivers
and software of your wireless equipment must be upgraded to support
it. These updates will be found on your wireless vendor’s website.
There are two types of WPA security: WPA-PSK (no server), and WPA
(with radius server).
WPA-PSK (no server) uses what is known as a pre-shared key as
the network key. A network key is a password that is between 8 and
63 characters long. It can be a combination of letters, numbers,
or characters. Each client uses the same network key to access
the network. Typically, this is the mode that will be used in a home
environment.
WPA (with radius server) is a system where a radius server
distributes the network key to the clients automatically. This is
typically found in a business environment.
For a list of Belkin wireless products that support WPA, please visit
our website at www.belkin.com/networking.
Most Wireless products ship with security turned off. So once you
have your network working, you may need to activate WEP or WPA
and make sure all your wireless devices are sharing the same
network key.
18
Using the Belkin Wireless LAN Utility
The following diagram shows the effect of not having the correct
network key throughout your network.
2
Network key=
MyPassword
3
4
5
Network key=
MyPassword
Wireless G Router
Wireless G Notebook
Network Card
6
7
Network key=
WRONG Password
8
Wireless G Desktop
Network Card
The Card cannot access the network because it uses a different network key than the one
configured on the wireless router.
Setting Up your Belkin Wireless Router or Access Point
to Use Security
To start using security, you need to first enable WEP or WPA for
your wireless router or access point. For Belkin Wireless Routers (or
Access Points), these security features can be configured by using
the web-based interface. See your wireless router (or access point)
manual for directions on how to access the management interface.
Changing the Wireless Security Settings
The Belkin Wireless G Router and Belkin G Range Extender/Access
Point are equipped with the latest WPA security feature. They also
support the legacy WEP security standard. By default, wireless
security is disabled.
To enable security, you will need to determine which standard you
want to use. To access the security settings, click “Security” on the
wireless section using the web-based interface. (See your wireless
router or access point manual for directions on how to access the
security settings.)
19
9
10
section
Wireless G USB
Network Adapterz
Network key=
MyPassword
1
Using the Belkin Wireless LAN Utility
WEP Setup
64-Bit WEP Encryption
1.
Select “64-bit WEP” from the drop-down menu.
2.
After selecting your WEP encryption mode, you can enter your
key by typing in the hex key manually, or you can type in a
passphrase in the “Passphrase” field and click “Generate” to
create a key.
A hex (hexadecimal) key is a mixture of numbers and letters from
A–F and 0–9. For 64-bit WEP, you need to enter 10 hex keys.
For instance:
AF 0F 4B C3 D4 = 64-bit WEP Key
3.
Click “Apply Changes” to finish. Encryption in the wireless router
or access point is now set. Each of your computers on your
wireless network will now need to be configured with the same
security settings.
WARNING: If you are using a wireless client to turn on the security
settings in your wireless router or access point, you will temporarily
lose your wireless connection until you activate security on your
wireless client. Please record the key prior to applying changes in the
wireless router or access point. If you don’t remember the hex key,
your client will be locked out of the wireless router or access point.
20
Using the Belkin Wireless LAN Utility
1
128-Bit WEP Encryption
Select “128-bit WEP” from the drop-down menu.
2.
2
After selecting your WEP encryption mode, you can enter your
key manually by typing in the hex key manually, or you can type
in a passphrase in the “Passphrase” field and click “Generate” to
create a key.
3
A hex (hexadecimal) key is a mixture of numbers and letters from
A–F and 0–9. For 128-bit WEP, you need to enter 26 hex keys.
For instance:
C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit WEP key
4
5
6
7
8
9
10
3.
Click “Apply Changes” to finish. Encryption in the wireless router
or access point is now set. Each of the computers on your
wireless network will now need to be configured with the same
security settings.
WARNING: If you are using a wireless client to turn on the security
settings in your wireless router or access point, you will temporariy
lose your wireless connection until you activate security on your
wireless client. Please record the key prior to applying changes in the
wireless router or access point. If you don’t remember the hex key,
your client will be locked out of the wireless router or access point.
21
section
1.
Using the Belkin Wireless LAN Utility
WPA-PSK (no server)
Choose this setting if your network does not use a radius server. WPA-PSK
(no server) is typically used in home and small office networking.
1.
From the Security Mode drop-down menu, select “WPA-PSK
(no server)”.
2.
Enter your network key. This can be from 8 to 63 characters and
can be letters, numbers, or symbols. This same key must be used
on all of the clients (network cards) that you want to include in
your wireless network.
3.
Click “Apply Changes” to finish. You must now set all clients
(network cards) to match these settings.
22
Using the Belkin Wireless LAN Utility
WPA (with server) Settings
1
Choose this setting if your network uses a radius server to distribute
keys to the clients (network cards). WPA (with server) is typically used
in business networks.
2
From the Security Mode drop-down menu, select “WPA (with
Radius Server)”.
3
2.
Enter the IP address of the radius server into the “Radius
Server” fields.
4
3.
Enter the radius key into the “Radius Key” field.
4.
Enter the key interval. The key interval is how often the keys are
distributed (in packets).
5
6
7
8
9
10
5.
Click “Apply Changes” to finish. You must now set all clients
(network cards) to match these settings.
IMPORTANT: You must now set all wireless network cards/
adapters to match these settings.
23
section
1.
Using the Belkin Wireless LAN Utility
Configuring your Belkin Wireless G Notebook and Wireless G
Desktop Network Cards to Use Security
At this point, you should already have your wireless router or access
point set to use WPA or WEP. In order for you to gain wireless
connection, you will need to set your Wireless G Notebook and
Wireless G Desktop Network Cards to use the same security settings.
Connecting your Computer to a Wireless Router or Access Point that
requires a 64-Bit or 128-Bit WEP Key:
1.
Double-click the Signal Indicator icon
to bring up the
“Wireless Network” screen. The “Advanced” button will allow you
to view and configure more options of your Card.
2.
Under the “Wireless Network” tab, select a network name from
the “Available networks” list and click “Configure”.
3.
Under “Data Encryption” select “WEP”.
4.
Ensure that the check box “The key is provided for me
automatically” at the bottom is unchecked. If you are using this
computer to connect to a corporate network, please consult your
network administrator if this box needs to be checked.
24
Using the Belkin Wireless LAN Utility
5.
Type your WEP key in the “Network key” box.
1
2
3
5
6
7
8
Important: A WEP key is a mixture of numbers and letters from A–F
and 0–9. For 128-bit WEP, you need to enter 26 keys. For 64-bit WEP,
you need to enter 10 keys. This network key needs to match the key
you assign to your wireless router or access point.
6.
Click “OK”, and then “Apply” to save the settings.
25
9
10
section
4
Using the Belkin Wireless LAN Utility
Connecting your Computer to a Wireless Router or Access Point that
uses WPA-PSK (no server)
1.
Double-click the “Signal Indicator” icon
to bring up the
“Wireless Network Properties” screen. The “Advanced” button will
allow you to view and configure more options of your Card.
2.
Under the “Wireless Networks” tab, select a network name from
the “Available networks” list and click “Configure”. The following
screen will appear.
3.
Under “Network Authentication” select “WPA-PSK”.
4.
Type your WPA key in the “Network key” box.
Important: WPA-PSK is a combination of numbers and letters
from A–Z and 0–9. For WPA-PSK. The key must be between 8
and 63 characters long, and needs to match the key you assign
to your wireless router or access point.
5.
Click “OK”, then “Apply” to save the settings.
26
Using the Belkin Wireless LAN Utility
Connecting your Computer to a Wireless Router or Access Point that
uses WPA (with Radius Server)
1
1.
2
Double-click the “Signal Indicator” icon
to bring up the
“Wireless Network Properties” screen. The “Advanced” button
will allow you to view and configure more options of your Card.
3.
4.
5.
27
Under the “Wireless
Networks” tab, select a
network name from the
“Available networks” list
and click “Configure”. The
screen to the left
will appear.
Under “Network
Authentication”
select “WPA”.
Under the
“Authentication” tab,
select the settings that
are indicated by your
network administrator.
Click “OK”, to save
the settings.
4
5
6
7
8
9
10
section
2.
3
Using the Belkin Wireless LAN Utility
Monitoring the Status of your Network Connection
Click on the “Link Status” tab.
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)
(i)
(j)
(a) Network Name (SSID)
The SSID is the wireless network name. This field shows the current
network name that you are connected to.
(b) AP’s MAC Address
Shows the MAC address of the wireless router or access point that
you are connected to.
(c) WEP
Shows whether the network you are associated with has WEP
encryption enabled or disabled.
(d) Speed
Displays the data rate of the current connection.
(e) Channel
Shows the current channel (1-11) you are using. When connected to a
wireless router or access point, the channel is set automatically. When
connected to another computer using Ad-Hoc mode, the channel can
be set manually. All computers using Ad-Hoc mode (computer-tocomputer) need to operate under the same channel.
28
Using the Belkin Wireless LAN Utility
(f) Client IP Address
Shows the IP address of the computer. The IP address is obtained
automatically by default. You may set the IP address manually through
Windows Networking Properties.
(g) Network Connection Type
(h) Radio State
2
3
4
5
Shows whether the radio of your wireless client is enabled or
disabled.
6
(i) Signal
7
Displays the wireless signal strength in decibels (dBm). The decibel
scale is negative, so smaller absolute values correspond to stronger
signals (i.e. -20 dBm is stronger than -80 dBm). The signal to noise
ratio (SNR) is the difference between the signal and the noise (e.g.
if the noise is -80 dBm and the signal is -20 dBm, the SNR is 60
dB); the larger the SNR, the better. In general, connections should
have an SNR greater than 20 dBm, or the user may experience poor
reliability and/or performance. If the signal is less than -50 dBm, the
user should consider repositioning their workstation Wireless Router
or Access Point, rotating the Wireless Router or Access Point’s
antennas, or Limiting their Transmission Rate (described on page 38
of the troubleshooting section of the manual), to ensure a reliable
wireless connection.
(j) Noise
Displays the intensity of the external noise, on this wireless channel,
in decibels (dBm). If the noise is greater than -70 dBm, the user
should consider changing the wireless channel used in their Wireless
Router or Access Point, to ensure a reliable wireless connection.
29
8
9
10
section
Shows the current wireless mode the Card is operating in. There are
two operating modes: Infrastructure and Ad-Hoc. Infrastructure is the
most common mode to operate in. Infrastructure mode is used when
connecting your PC to a wireless router or a wireless access point.
Ad-Hoc mode is used to connect two or more computers together
without the use of a wireless router or an access point.
1
Using the Belkin Wireless LAN Utility
Monitoring Data Transfer
Click on the “Statistics” tab.
The Statistics tab shows you how much data has been sent and
received and if any errors occurred. This screen is mostly for
diagnostics. Note that the number of data packets lost is recorded. A
large number of lost data packets may indicate that there is a problem
or interference in your area. (See the Troubleshooting section for tips
on how to improve performance.)
30
Using the Belkin Wireless LAN Utility
1
Finding Available Networks in your Area
Click on the “Site Monitor” tab.
Clicking on the “Site Monitor” tab will display a list of all available
wireless routers or access points in your area.
(b)
(c)
3
(d)
4
5
6
(e)
(f)
(g)
7
8
9
(a) Network Name (SSID)
The network name of the wireless router or access point.
(b) Channel
The current operating channel of the wireless router or access point.
(c) Signal Strength
The signal strength of the related wireless router or access point.
(d) WEP (Encryption)
Will display “Off” when encryption is disabled, “64-bit” when 64-bit
encryption is enabled, and “128-bit” when 128-bit encryption is enabled.
(e) Ad-Hoc Networks Only
Check this box to display available Ad-Hoc networks only. An Ad-Hoc
network is a computer-to-computer network.
(f) Advanced
Displays additional information about the selected network.
(g) Freeze
Takes a “snapshot” of the signal strength at the time of the site
survey. Click again to unfreeze.
31
10
section
(a)
2
Using the Belkin Wireless LAN Utility
Performing Diagnostic Tests on your Connection
Click on the “Diagnostics” tab.
This page allows you to perform several diagnostic tests that are
available for your Belkin High-Speed Mode Wireless G Notebook
Network Card.
Control Registers
This test verifies the read and write capabilities of the network
controller registers by writing various values to the registers and
verifying the result. The device driver uses these registers to perform
network functions such as sending and receive information. If the test
fails, the network adapter may not work properly.
SPROM Format Version
This test verifies the content of the SPROM by reading a portion
of the SPROM and computing the checksum. The test fails if the
computed checksum is different than the checksum stored in
the SPROM.
Memory Tests
This tests verifies that the network controller internal memory is
functioning properly. The test writes patterned values to the memory
and reading back the results. The test fails if an erroneous value is
read back. The network controller will not function without its
internal memory.
32
Using the Belkin Wireless LAN Utility
Interrupt Test
This test verifies that the NDIS driver is able to receive interrupts
from the network controller.
Loopback Test
1
2
3
LED Test
4
This test verifies that your 802.11 wireless networking
hardware is functioning correctly.
5
6
7
8
9
10
33
section
This test verifies that the NDIS driver is able to send packets and
receive packets from the network controller.
Troubleshooting
I can’t connect to the Internet wirelessly
If you are unable to connect to the Internet from a wireless
computer, please check the following items:
1. Look at the lights on your Wireless Router. If you’re using a
Belkin Wireless Router, the lights should be as follows:
• The “Power” light should be on.
• The “Connected” light should be on, and not blinking.
• The “WAN” light should be either on or blinking.
If your Belkin Wireless Router’s lights have the above
characteristics, go to number 2. below.
If this is NOT the case, make sure:
• The Router power cord is plugged in
• All cables are connected between the router and
the modem
• All the modem’s LEDs are functioning correctly. If not, see
your modem’s user manual.
• Reboot the Router
• Reboot the Modem
If you continue to have issues, please contact Belkin
Technical Support.
If you are not using a Belkin Wireless Router, consult that router
manufacturer’s user guide.
2. Open your wireless utility software by clicking on the icon in
the system tray at the bottom right-hand corner of the screen.
If you’re using a Belkin wireless card, the tray icon should look
like this (the icon may be red or green):
34
Troubleshooting
3. The exact window that opens will vary depending on the model
of wireless card you have; however, any of the utilities should
have a list of “Available Networks”. Available networks are
wireless networks you can connect to.
1
2
If you are using a Belkin 802.11g (125HSM) router, or Belkin
802.11g (54g) router, “Belkin54g” is the default name.
3
If you are using a Belkin 802.11b router, the default name should
be “WLAN”.
4
The name of your wireless network appears in
“Available Networks”
If the correct network name is listed in the “Available Networks”
list, please follow the steps below to connect wirelessly:
1. Click on the correct network name in the “Available Networks” list.
2. If the network has security (encryption) enabled, you will
need to enter the network key. Click “Connect”. For more
information regarding security, see the page entitled: “Securing
your Wi-Fi Network” on pg. 16 of the user manual.
3. Within a few seconds, the tray icon in the lower
right-hand corner of your screen should turn green, indicating
a successful connection to the network.
If you are still unable to access the Internet after connecting to
the wireless network, please contact Belkin Technical Support.
35
5
6
7
8
9
10
section
If using a non-Belkin router, please consult your router
manufacturers user manual for the default name.
Troubleshooting
The name of your wireless network DOES NOT appear in the list
of “Available Networks”
If the correct network name is not listed, check the SSID settings
to see if they match. The SSID is case-sensitive and the spelling
on each computer must be exactly the same in order for the Card
to connect to the Wireless Router or Access Point.
Note: To check the SSID settings or look for an available
network, double-click the Signal Indicator icon to bring up the
“Wireless Networks” screen. Click “Add” if you do not see the
network you are trying to connect to and type in the SSID. For
more information about setting up a SSID please reference your
router manufacture’s user manual.
If issues persist even at close range, please contact Belkin
Technical Support.
Installation CD-ROM does not start Setup Utility
If the CD-ROM does not start the Setup Utility automatically, it
could be that the computer is running other applications that are
interfering with the CD drive.
If the Setup Utility screen does not appear within 15-20 seconds,
open up your CD-ROM drive by double-clicking on the “My
Computer” icon. Next, double-click on the CD-ROM drive that the
Installation CD has been placed in to start the installation. Then
double-click on the folder named “Files”. Next, double-click on
the icon named “setup.exe”.
Power LED does not come ON; Card is not working
If the LED indicators are not ON, the problem may be that the
Card is not connected or installed properly.
Verify that the Card is plugged firmly into the CardBus slot of
your computer. Check to see that the drivers for the Card have
been installed. Right click on the “My Computer” icon on your
desktop. Choose “Properties” and navigate to the “Device
Manager” and see if your CardBus Card is listed without any
errors. If an error is indicated contact Belkin Technical Support.
36
Troubleshooting
Link LED is blinking slowly; Cannot connect to a wireless
network or the Internet
If your Card appears to be functioning properly, but you cannot
connect to a network or you have a red wireless icon at the
bottom of your screen, the problem may be that there is a
mismatch between the network name (SSID) settings in your
wireless network properties.
Note: To check the SSID settings or look for an available
network, double-click the Signal Indicator icon to bring up the
“Wireless Networks” screen. Click “Add” if you do not see the
network you are trying to connect to and type in the SSID.
For more information about setting up a SSID please reference
your router manufactures user manual. If issues persist even at
close range, please contact Belkin Technical Support.
Link LED is solid but cannot connect to the Internet
If you have a signal but can’t get online or obtain an IP address,
the problem may be that there is a mismatch between the
Encryption key settings in your computer and Wireless Router
or Access Point.
Check the WEP key settings to see if they match. The key is
case-sensitive and the spelling on each computer and Wireless
Router or Access Point must be exactly the same in order for the
Adapter to connect to the router. For more information about
encryption please see “Securing your Wi-Fi Network” on page 16
of this manual.
If issues persist even at close range, please contact please
contact Belkin Technical Support.
37
2
3
4
5
6
7
8
9
10
section
Check the SSID settings to see if they match. The SSID is
case-sensitive and the spelling on each computer must be
exactly the same in order for the Card to connect to the
Wireless Router or Access Point.
1
Troubleshooting
Data transfer is sometimes slow
Wireless Technology is radio-based, which means connectivity
and the throughput performance between devices decreases
when the distance between devices increases. Other factors that
will cause signal degradation (metal is generally the worst culprit)
are obstructions such as walls and metal appliances. As a result,
the typical indoor range of your wireless devices will be between
100 to 200 feet. Note also that connection speed may decrease
as you move further from the Wireless Router or Access Point.
In order to determine if wireless issues are related to range, we
suggest temporarily moving the computer, if possible, to five to
ten feet from the Wireless Router or Access Point. Please see the
section titled “Placement of your Wireless Networking Hardware
for Optimal Performance” on page 2 of this manual. If issues
persist even at close range, please contact please contact Belkin
Technical Support.
Signal strength is poor
Wireless Technology is radio-based, which means connectivity
and the throughput performance between devices decreases
when the distance between devices increases. Other factors that
will cause signal degradation (metal is generally the worst culprit)
are obstructions such as walls and metal appliances. As a result,
the typical indoor range of your wireless devices will be between
100 to 200 feet. Note also that connection speed may decrease
as you move further from the Wireless Router or Access Point.
In order to determine if wireless issues are related to range, we
suggest temporarily moving the computer, if possible, to five to
ten feet from Wireless Router or Access Point.
Changing the wireless channel – Depending on local wireless
traffic and interference, switching the wireless channel of your
network can improve performance and reliability. The default
channel the router is shipped with is channel 11, you may choose
from several other channels depending on your region; see your
router or access point user manual for instructions on how to
choose other channels.
Limiting the wireless transmit rate – Limiting the wireless
transmit rate can help improve the maximum wireless range,
and connection stability. Most wireless cards have the ability
38
Troubleshooting
If issues persist even at close range, please contact please
contact Belkin Technical Support.
Why are there two wireless utilities in my system tray?
Which one do we use?
There are several features and advantages from using the Belkin
wireless utility over the Windows XP Wireless Zero Configuration
utility. We offer a site survey, detailed link information and
adapter diagnosis, to name a few.
It’s essential to know which utility is managing your adapter. We
recommend using the Belkin wireless utility.
To use the Belkin wireless utility follow the steps below:
Step 1 Right-click on the network status icon in the system tray
and select View Available Wireless Networks.
Step 2 Click on the Advanced button in the lower-left corner of
the Available Wireless Networks window.
Step 3 From the Advanced tab uncheck “Use Windows to
configure my wireless network”. Once the box is unchecked click
OK to close the Window.
You are now using the Belkin wireless Utility to configure the
wireless card.
39
1
2
3
4
5
6
7
8
9
10
section
to limit the transmission rate. To change this property, go to
the Windows Control Panel, open the Network Connections
and double-click on your wireless card’s connection. In the
properties dialog, select the configure button on the General tab
(Windows 98 users will have to select the wireless card in the list
box and then click properties), then choose the advanced tab and
select the Rate property. Wireless client cards are usually set to
automatically adjust the wireless transmit rate for you, but doing
so can cause periodic disconnects when the wireless signal is
too weak; as a rule, slower transmission rates are more stable.
Experiment with different connection rates until you find the best
one for your environment; note that all available transmission
rates should be acceptable for browsing the Internet. For more
assistance, see your wireless card’s literature.
Troubleshooting
Card does not perform or connection is unstable when computer has
a second built-in wireless network card (such as a mini PCI or
Intel® Centrino™)
This condition occurs if your computer has a built-in wireless
card while your Belkin Wireless Card is also active. This happens
because Windows must now handle two active
wireless connections.
You need to disable the built-in wireless card from your computer
under “Network Adapters” in the Device Manager.
Card does not perform or connection is slow when computer has a
built-in wired Ethernet card
This condition occurs if your computer has an active Ethernet
card while your Wireless Adapter is also active. This happens
because Windows must now handle two active network
connections.
You need to disable the Ethernet card from your computer under
“Network Adapters” in the Device Manager.
40
Troubleshooting
What’s the difference between 802.11b, 802.11g and 802.11a?
Currently there are three levels of wireless networking standards,
which transmit data at very different maximum speeds. Each is based
on the designation 802.11(x), so named by the IEEE, the board that
is responsible for certifying networking standards. The most common
wireless networking standard, 802.11b, transmits information at
11Mbps; 802.11a and 802.11g work at 54Mbps. See the following
chart for more detailed information.
2
3
4
5
Wireless
Technology
802.11b
802.11g
802.11a
Speed
11Mbps
54Mbps
54Mbps
Frequency
Common
household
devices such as
cordless phones
and microwave
ovens may
interfere with the
unlicensed band
2.4 GHz
Common
household
devices such as
cordless phones
and microwave
ovens may
interfere with the
unlicensed
band 2.4 GHz
5GHz uncrowded
band
Incompatible
with 802.11b
or 802.11g
7
8
9
10
Compatibility
Compatible
with 802.11g
Compatible
with 802.11b
Range
Depends on
interference typically 100–200
ft. indoors
Less
Depends on
interference interference range is
typically 100–200
typically
ft. indoors
50-100 feet
Adoption
Mature –
widely adopted
Expected to
continue to grow
in popularity
Slow adoption
for consumers more popular in
business
environments
Price
Inexpensive
More expensive
Most expensive
41
6
section
Wireless Comparison
1
Troubleshooting
Technical Support
You can find technical support information at www.belkin.com or
www.belkin.com/networking. If you want to contact technical support
by phone, please call:
US: 877-736-5771
Europe: 00 800 223 55 460
Australia: 1800 666 040
42
Information
1
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES
FOR ELECTROMAGNETIC COMPATIBILITY
We, Belkin Corporation, of 501 West Walnut Street,
Compton, CA 90220, declare under our sole
responsibility that the product,
F5D7011
Caution: Exposure to Radio Frequency Radiation.
The radiated output power of this device is far below the FCC radio
frequency exposure limits. Nevertheless, the device shall be used in such
manner that the potential for human contact normal operation is minimized.
When connecting an external antenna to the device, the antenna shall be
placed in such a manner to minimize the potential for human contact during
normal operation. In order to avoid the possibility of exceeding the FCC radio
frequency exposure limits, human proximity to the antenna shall not be less
than 20cm (8 inches) during normal operation.
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
43
3
4
5
6
7
8
9
10
section
to which this declaration relates,
complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device
must accept any interference received, including
interference that may cause undesired operation.
2
Information
This equipment generates, uses, and can radiate radio frequency energy.
If not installed and used in accordance with the instructions, it may cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try and
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Modifications
The FCC requires the user to be notified that any changes or modifications to
this device that are not expressly approved by Belkin Corporation may void
the users authority to operate the equipment.
Canada-Industry Canada (IC)
The wireless radio of this device complies with RSS 139 & RSS 210 Industry
Canada. This Class B digital complies with Canadian ICES-003.
Cet appareil numérique de la classe B conforme á la norme NMB-003 du Canada.
Europe-European Union Notice
Radio products with the CE 0682 or CE alert marking
comply with the R&TTE Directive (1995/5/EC) issued by the
Commission of the European Community.
Compliance with this directive implies conformity to the following European
Norms (in brackets are the equivalent international standards).
• EN 60950 (IEC60950) – Product Safety
• EN 300 328 Technical requirement for radio equipment
• ETS 300 826 General EMC requirements for radio equipment.
To determine the type of transmitter, check the identification label on your
Belkin product.
44
Information
Products with the CE marking comply with the EMC Directive (89/336/EEC)
and the Low Voltage Directive (72/23/EEC) issued by the Commission of the
European Community. Compliance with these directives implies conformity
to the following European Norms (in brackets are the equivalent international
standards).
• EN 55022 (CISPR 22) – Electromagnetic Interference
• EN 55024 (IEC61000-4-2,3,4,5,6,8,11) – Electromagnetic Immunity
• EN 61000-3-2 (IEC610000-3-2) – Power Line Harmonics
• EN 61000-3-3 (IEC610000) – Power Line Flicker
• EN 60950 (IEC60950) – Product Safety
Products that contain the radio transmitter are labeled with CE 0682 or CE
alert marking and may also carry the CE logo.
This warranty does not apply if the product has been damaged by accident,
abuse, misuse, or misapplication; if the product has been modified without
the written permission of Belkin; or if any Belkin serial number has been
removed or defaced.
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE
IN LIEU OF ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESSED
OR IMPLIED. BELKIN SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED
WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
No Belkin dealer, agent, or employee is authorized to make any modification,
extension, or addition to this warranty.
BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF
WARRANTY, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT
NOT LIMITED TO, LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO
OR REPROGRAMMING OR REPRODUCING ANY PROGRAM OR DATA
STORED IN, OR USED WITH, BELKIN PRODUCTS.
Some states do not allow the exclusion or limitation of incidental or
consequential damages or exclusions of implied warranties, so the above
limitations of exclusions may not apply to you. This warranty gives you
specific legal rights, and you may also have other rights that vary from state
to state.
45
2
3
4
5
6
7
8
9
10
section
Belkin Corporation Limited Lifetime Product Warranty
Belkin Corporation warrants this product against defects in materials and
workmanship for its lifetime. If a defect is discovered, Belkin will, at its
option, repair or replace the product at no charge provided it is returned
during the warranty period, with transportation charges prepaid, to the
authorized Belkin dealer from whom you purchased the product. Proof of
purchase may be required.
1
High-Speed Mode
Wireless G Notebook
Network Card
belkin.com
Belkin Tech Support
US: 877.736.5771
310.898.1100 ext. 2263
Europe: 00 800 223 55 460
Australia: 1800 666 040
Belkin, Ltd.
7 Bowen Crescent • West Gosford
NSW 2250 • Australia
Tel: +61 (0) 2 4372 8600
Fax: +61 (0) 2 4372 8603
Belkin Corporation
501 West Walnut Street
Compton • CA • 90220 • USA
Tel: 310.898.1100
Fax: 310.898.1111
Belkin Components B.V.
Starparc Building • Boeing Avenue 333
1119 PH Schiphol-Rijk • The Netherlands
Tel: +31 (0) 20 654 7300
Fax: +31 (0) 20 654 7349
Belkin Components, Ltd.
Express Business Park • Shipton Way
Rushden • NN10 6GL • United Kingdom
Tel: +44 (0) 1933 35 2000
Fax: +44 (0) 1933 31 2000
© 2004 Belkin Corporation. All rights reserved. All trade names are registered trademarks
of respective manufacturers listed. BROADCOM, 54g, the 54g logo, 125 High Speed
Mode, and the 125 High Speed Mode logo are trademarks of Broadcom Corporation in
the United States and/or other countries.
P74488-A
Download PDF

advertising