Pulnix | TMC-63M | TMC-73M/TMC-63M

768 x 494/752 x x582
TMC-73M/TMC-63M
Color Interlaced Scan CCD









High efficiency 1/3” interline transfer CCD with micro lenses
768H x 494V resolution (NTSC)
752H x 582V resolution (PAL)
Small size, rugged construction
Shutter from 1/60 to 1/10,000 sec.
Selectable white balance, auto-shutter and AGC
External adjustments for gain, hue, chroma, and other functions
Low light sensitivity of 5 lux at f/1.4
OEM boardsets available
www.jai.com
NTSC/PAL
Specifications for TMC-73M/TMC-63M
Specifications
TMC-73M
TMC-63M
Spectral Response
1/3” interlaced scan IT CCD
ICX408AK-6
Active pixels
768 (H) x 494 (V)
752 (H) x 582 (V)
Cell size
6.35 μm x 7.4 μm
7.35 μm x 7.4 μm
Color filter
Cy, Ye, Mg, G complementary color filter
Scanning
2.1 interlace, field mode scanning
525 lines, 59.54 Hz
Synchronization
625 lines, 50 Hz
Internal sync only
TV resolution
fH=15.734 KHz
fV=59.95 Hz
fH=15.625 KHz
fV=50.00 Hz
460 (H) x 400 (V) TVL
450 (H) x 450 (V) TVL
S/N ratio
>50 dB (AGC off)
Sensitivity
5.0 lux f=1.4 (AGC ON)
VBS= 1.0 Vp-p at 75 Ω (NTSC & PAL)
Y=1.0 Vp-p with sync, C= 285 mV at 75 Ω
Video output
Color balance
Manual white balance (selectable)
AGC
Max. 32 dB AGC, on-off switchable,
manual gain control
Gamma
Operating temperature
.4
.3
.2
.1
.0
1
2
3
12V DC, 190 mA
Auto Iris connector
.6
.5
G
Mg
400
500
600
700
Connector Pin-out
CS-mount
Power
Ye
Cy
Wavelength (nm)
0.45
Lens mount
1.0
.9
.8
.7
ICX409AK-6
Relative Response
Sensor
|
11
4
12-Pin Connector
9
8
10
7
12
5
6
Internal wiring only, galvanometirc iris driver
and iris video output
1
2
3
4
5
6
GND
+12V in
GND
Video out (VBS)
N/C (Ext. Cont.)
Atuo/Man
7
8
9
10
11
12
Chroma out (Data in)
N/C (Load in)
Y out (CLK in)
D0
D1
D2
-10° C to 50° C
(-30° C to +65° C extended temp optional)
Vibration
7 Grms (10 Hz to 2000 Hz) Random
Switches
Dimensions
40 mm dia. x 73 mm
Weight
120 g (without tripod)
Dimensions
Front view
Switches
Auto/MAN ... Auto-shutter on/off switch. Manual control by D0, D1, D2
AGC/MGC ... AGC on/off switch. Manual control by serial input
55/32 ......... White balance at 5500ºK/3200ºK
External control mode (optional)
12 bit serial D/A is built-in. It controls 8 bits of data and 4 bits of address for
1. Manual Gain, 2. Iris level control for galvanometric lens, 3. Chroma level,
4. R-Y hue control, 5. B-Y hue control, 6. Spare for Ext. control mode. Set EXT
cont (#%) to Low and apply serial data. Clock and Load to #7, 8 and 9 pins.
Consult JAI for details.
Side view
Ordering Information
Camera
TMC-73MB
BottomBoard
view set dimensions
(Note" Board set sold only in
custom OEM quantity lots.)
Europe, Middle East & Africa
Phone +45 4457 8888
Fax +45 4491 8880
Visit our web site on www.jai.com
TMC-73M (NTSC), TMC-63M (PAL)
RoHS Compliant
RMC-73M (NTSC), RMC-63M (PAL)
Optional Accessories (must be ordered separately)
Asia Pacific
Phone +81 45 440 0154
Fax +81 45 440 0166
TMC-73MB
Board set dimensions
(Note" Board set sold only in
custom OEM quantity lots.)
Lead Processing
Power Supply
12VDC, 300mA
Power Cable
12P-02 for NTSC/PAL and Y/C
KC-10 for NTSC/PAL only
Americas
Phone (Toll-Free) 1 800 445 5444
Phone +1 408 383 0300
TMC-73MB
Board set dimensions
(Note" Board set sold only in
custom OEM quantity lots.)
Company and product names mentioned in this datasheet are trademarks or registered trademarks of their respective owners.
JAI A·S cannot be held responsible for any technical or typographical errors and reserves the right to make changes to products and documentation without prior notification.
70 G, 11 ms, half-sine
71-0008 Rev B.03.21.2007
Shock
Download PDF