HP Pavilion v2000 - Desktop PC Specifications

Maintenance and Service
Guide
HP Pavilion dv2000 Notebook PC
Document Part Number: 417981-001
June 2006
This guide is a troubleshooting reference used for maintaining
and servicing the computer. It provides comprehensive
information on identifying computer features, components, and
spare parts; troubleshooting computer problems; and performing
computer disassembly procedures.
© Copyright 2006 Hewlett-Packard Development Company, L.P.
Microsoft and Windows are U.S. registered trademarks of
Microsoft Corporation. Intel and Core are trademarks or registered
trademarks of Intel Corporation or its subsidiaries in the United States and
other countries. AMD, Sempron, Turion, and combinations thereof, are
trademarks of Advanced Micro Devices, Inc. Bluetooth is a trademark
owned by its proprietor and used by Hewlett-Packard Company under
license.
The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the
express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty.
HP shall not be liable for technical or editorial errors or omissions
contained herein.
Maintenance and Service Guide
HP Pavilion dv2000 Notebook PC
First Edition: June 2006
Document Part Number: 417981-001
Contents
1 Product Description
1.1
1.2
1.3
1.4
1.5
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2
Resetting the Computer. . . . . . . . . . . . . . . . . . . . . . . 1–4
Power Management. . . . . . . . . . . . . . . . . . . . . . . . . . 1–5
External Components . . . . . . . . . . . . . . . . . . . . . . . . 1–6
Design Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . 1–22
2 Troubleshooting
2.1
2.2
2.3
2.4
Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Setup Utility . . . . . . . . . . . . . . . . . . . . . . .
Setup Utility Menus . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting Flowcharts . . . . . . . . . . . . . . . . . . .
Maintenance and Service Guide
2–1
2–2
2–6
2–9
iii
Contents
3 Illustrated Parts Catalog
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
Serial Number Location . . . . . . . . . . . . . . . . . . . . . . 3–1
Computer Major Components. . . . . . . . . . . . . . . . . . 3–2
Display Assembly Components . . . . . . . . . . . . . . . 3–16
Mass Storage Devices . . . . . . . . . . . . . . . . . . . . . . . 3–18
Plastics Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–20
Cable Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–21
Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–22
Sequential Part Number Listing . . . . . . . . . . . . . . . 3–25
4 Removal and Replacement Preliminaries
4.1 Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2 Service Considerations . . . . . . . . . . . . . . . . . . . . . . .
Plastic Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cables and Connectors . . . . . . . . . . . . . . . . . . . . . . .
4.3 Preventing Damage to Removable Drives . . . . . . . .
4.4 Preventing Electrostatic Damage . . . . . . . . . . . . . . .
4.5 Packaging and Transporting Precautions . . . . . . . . .
4.6 Workstation Precautions . . . . . . . . . . . . . . . . . . . . . .
4.7 Grounding Equipment and Methods . . . . . . . . . . . . .
iv
4–1
4–2
4–2
4–2
4–3
4–4
4–5
4–6
4–7
Maintenance and Service Guide
Contents
5 Removal and Replacement Procedures
5.1 Serial Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–2
5.2 Disassembly Sequence Chart . . . . . . . . . . . . . . . . . . 5–3
5.3 Preparing the Computer for Disassembly . . . . . . . . . 5–5
5.4 Hard Drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–7
5.5 RTC Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–11
5.6 Computer Feet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–12
5.7 Memory Module . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–13
5.8 Mini Card Module. . . . . . . . . . . . . . . . . . . . . . . . . . 5–16
5.9 Optical Drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–20
5.10 Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–22
5.11 Switch Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–26
5.12 Display Assembly . . . . . . . . . . . . . . . . . . . . . . . . . 5–30
5.13 Top Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–43
5.14 TouchPad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–48
5.15 Wireless Switch Board . . . . . . . . . . . . . . . . . . . . . 5–52
5.16 Modem Module. . . . . . . . . . . . . . . . . . . . . . . . . . . 5–54
5.17 Audio/Infrared Board . . . . . . . . . . . . . . . . . . . . . . 5–56
5.18 Bluetooth Module . . . . . . . . . . . . . . . . . . . . . . . . . 5–58
5.19 USB Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–60
5.20 Speaker Assembly. . . . . . . . . . . . . . . . . . . . . . . . . 5–62
5.21 Display Lid Switch Module . . . . . . . . . . . . . . . . . 5–64
5.22 System Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–68
5.23 Power Connector Cable. . . . . . . . . . . . . . . . . . . . . 5–71
5.24 ExpressCard Assembly . . . . . . . . . . . . . . . . . . . . . 5–73
5.25 Fan/Heat Sink Assembly. . . . . . . . . . . . . . . . . . . . 5–76
5.26 Processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–84
Maintenance and Service Guide
v
Contents
6 Specifications
A Screw Listing
B Backup and Recovery
C Display Component Recycling
D Connector Pin Assignments
E Power Cord Set Requirements
Index
vi
Maintenance and Service Guide
1
Product Description
The HP Pavilion dv2000 Notebook PC offers advanced
modularity, Intel® Core™ Duo and Core Solo processors or
AMD Turion™ 64 Mobile Technology and Mobile AMD
Sempron™ processors, and extensive multimedia support.
HP Pavilion dv2000 Notebook PC
Maintenance and Service Guide
1–1
Product Description
1.1 Features
■
The following processors are available, varying by
computer model:
❏ Intel Core Duo T2600 (2.16-GHz)
❏ Intel Core Duo T2500 (2.00-GHz)
❏ Intel Core Duo T2400 (1.83-GHz)
❏ Intel Core Duo T2250 (1.73-GHz)
❏ Intel Core Duo T2300 (1.66-GHz)
❏ Intel Core Duo T2050 (1.60-GHz)
❏ Intel Core Solo T1350 (1.80-GHz)
❏ AMD Turion ML-52 1.60-Ghz
❏ AMD Turion ML-50 1.60-GHz
❏ Mobile AMD Sempron 3400+ (1.80-GHz)
❏ Mobile AMD Sempron 3200+ (1.60-GHz)
1–2
■
14.0-inch WXGA (1280 × 768) TFT display with over
16.7 million colors, varying by computer model
■
120-, 100-, 80-, 60-, or 40-GB high-capacity hard drive,
varying by computer model
■
256-MB DDR synchronous DRAM (SDRAM) at 667 MHz
and 533 MHz, expandable to 2.0 GB
■
Microsoft® Windows® XP Home Edition or Windows XP
Professional, or Free DOS, varying by computer model
■
Full-size Windows keyboard with embedded numeric keypad
■
TouchPad pointing device with on/off button and dedicated
two-way scroll zone
■
Integrated 10/100 BASE-T Ethernet local area network
(LAN) network interface card (NIC) with RJ-45 jack
■
Integrated high-speed 56K modem with RJ-11 jack
Maintenance and Service Guide
Product Description
■
Integrated wireless support for Mini Card IEEE 802.11b and
802.11b/g WLAN device
■
Support for one ExpressCard
■
External 65-watt AC adapter with 3-wire power cord
■
6-cell or 12-cell Li-Ion battery
■
Stereo speakers with volume up and down buttons
■
Integrated Web camera (select models only)
■
Integrated microphone (select models only)
■
Support for the following optical drives:
❏ DVD/CD-RW Combo Drive
❏ DVD±RW/R and CD-RW Double-Layer Combo Drive
❏ DVD±RW/R and CD-RW Double-Layer Combo Drive
with LightScribe
■
Connectors:
❏ Audio-in (microphone)
❏ Audio-out (headphone)
❏ Consumer infrared lens
❏ Docking (select models only)
❏ ExpressCard
❏ External monitor
❏ IEEE 1394 digital (select models only)
❏ Memory Reader Slot (select models only)
❏ Power
❏ RJ-11 (modem)
❏ RJ-45 (network)
❏ S-Video-out (select models only)
❏ Universal Serial Bus (USB) v. 2.0
Maintenance and Service Guide
1–3
Product Description
1.2 Resetting the Computer
If the computer you are servicing has an unknown password,
follow these steps to clear the password. These steps also
clear CMOS:
1. Prepare the computer for disassembly (refer to Section 5.3,
“Preparing the Computer for Disassembly,” for more
information).
2. Remove the real-time clock (RTC) battery (refer to
Section 5.5, “RTC Battery,” for more information).
3. Wait approximately 5 minutes.
4. Replace the RTC battery and reassemble the computer.
5. Connect AC power to the computer. Do not reinsert any
batteries at this time.
6. Turn on the computer.
All passwords and all CMOS settings have been cleared.
1–4
Maintenance and Service Guide
Product Description
1.3 Power Management
The computer comes with power management features that
extend battery operating time and conserve power. The
computer supports the following power management features:
■
Standby
■
Hibernation
■
Setting customization by the user
■
Hotkeys for setting the level of performance
■
Battery calibration
■
Lid switch standby/resume
■
Power button
■
Advanced Configuration and Power Management (ACPM)
compliance
Maintenance and Service Guide
1–5
Product Description
1.4 External Components
The external components on the front of the computer are shown
below and described in Table 1-1.
Front Components
Table 1-1
Front Components
Item
Component
Function
1
Power light
■ On: The computer is on.
■ Blinking: The computer is in standby.
■ Off: The computer is off.
2
Battery light
■ On: A battery is charging.
■ Blinking: A battery that is the only
available power source has reached a
low battery condition or a critical
low-battery condition.
■ Off: If the computer is plugged into an
external power source, the light is turned
off when all batteries in the computer are
fully charged. If the computer is not
plugged into an external power source,
the light stays off until the battery
reaches a low-battery condition.
3
Drive light
Blinking: The hard drive or optical drive is
being accessed.
1–6
Maintenance and Service Guide
Product Description
Table 1-1
Front Components
Item
Component
Function
4
Wireless switch
(select models only)
Turns the wireless feature on or off, but
does not create a wireless connection.
establish a wireless connection, a
✎ To
wireless network must already be set
up.
5
Wireless light
Blue: An integrated wireless device, such
as a wireless local area network (LAN)
device and/or a Bluetooth® device, is
turned on.
Red: An integrated wireless device is
turned off.
6
Consumer infrared
lens
Links the computer to the HP Remote
Control.
7
Audio-in
(microphone) jack
Connects an optional computer headset
microphone, stereo array microphone, or
monaural microphone.
8
Audio-out
(headphone) jacks (2)
Produce sound when connected to optional
powered stereo speakers, headphones, ear
buds, a headset, or television audio.
on your computer model,
✎ Depending
the computer may have 1 or 2
audio-out (headphone) jacks.
Maintenance and Service Guide
1–7
Product Description
The external components on the right side of the computer are
shown below and described in Table 1-2.
Right-Side Components
1–8
Maintenance and Service Guide
Product Description
Table 1-2
Right-Side Components
Item
Component
Function
1
Optical drive
Reads an optical disc.
2
USB ports (2)
Connect optional USB devices.
3
RJ-11 (modem) jack
Connects a modem cable.
4
Power connector
Connects an AC adapter.
Maintenance and Service Guide
1–9
Product Description
The external components on the left side of the computer are
shown below and described in Table 1-3.
Left-Side Components
1–10
Maintenance and Service Guide
Product Description
Table 1-3
Left-Side Components
Item
Component
Function
1
Security cable slot
Attaches an optional security cable to the
computer.
security cable is designed to act
✎ The
as a deterrent, but it may not prevent
the computer from being mishandled
or stolen.
2
S-Video-out jack
Connects an optional S-Video device such
as a television, VCR, camcorder, overhead
projector, or video capture card.
3
External monitor port
Connects an external VGA monitor or
projector.
4
Expansion port 3
Connects the computer to an optional
expansion product.
computer has only one
✎ The
expansion port. The term expansion
port 3 describes the type of
expansion port.
5
RJ-45 (network) jack
Connects a network cable.
6
USB port
Connects an optional USB device.
7
1394 port
Connects an optional IEEE 1394 or 1394a
device, such as a camcorder.
8
Digital Media Slot
Supports the following optional digital card
formats: Secure Digital (SD) Memory Card,
MultiMediaCard (MMC), Secure Digital
Input/Output (SD I/O), Memory Stick (MS),
Memory Stick Pro (MSP), xD-Picture Card
(XD), xDPicture Card (XD) Type M.
9
Digital Media
Slot light
On: A digital card is being accessed.
10
ExpressCard slot
Supports optional ExpressCard/54 cards.
Maintenance and Service Guide
1–11
Product Description
The keyboard components on the computer are shown below and
described in Table 1-4.
Keyboard Components
1–12
Maintenance and Service Guide
Product Description
Table 1-4
Keyboard Components
Item
Component
Function
1
f1 to f12 keys (12)
Execute frequently used system functions
when pressed in combination with the
fn key.
2
caps lock key
Enables caps lock and turns on the caps
lock light.
3
fn key
Executes frequently used system
functions when pressed in combination
with a function key or the esc key.
4
Windows logo key
Displays the Microsoft Windows Start
menu.
5
Windows
applications key
Displays a shortcut menu for items
beneath the pointer.
6
Arrow keys
Move the cursor around the screen.
7
Embedded numeric
keypad keys (15)
Can be used like the keys on an external
numeric keypad.
8
num lock key
Enables numeric lock, turns on the
embedded numeric keypad, and turns
on the num lock light.
Maintenance and Service Guide
1–13
Product Description
The top components on the computer are shown below and
described in Table 1-5.
Top Components, Part 1
1–14
Maintenance and Service Guide
Product Description
Table 1-5
Top Components, Part 1
Item
Component
Function
1
Caps lock light
On: Caps lock is on.
2
Power button
When the computer is
■ Off, press to turn on the computer.
■ On, press to enter hibernation.
■ In standby, briefly press to exit standby.
■ In hibernation, briefly press to exit
hibernation.
If the computer has stopped responding
and Microsoft® Windows® shutdown
procedures cannot be used, press and hold
the power button for at least 5 seconds to
turn off the computer.
3
Speakers (2)
Produce sound.
4
Internal microphones
(2, select models only)
Record sound.
If there is a microphone icon next to each
microphone opening, your computer has
internal microphones.
5
Integrated camera
Records video and captures still
photographs.
6
Volume mute button
Mutes and restores speaker volume.
7
Volume scroll zone
Adjusts volume. Slide your finger to the left
to decrease volume and to the right to
increase volume. Alternatively, you can tap
the left half of the scroll zone to decrease
volume, or you can tap the right half of the
scroll zone to increase volume.
8
Num lock light
On: Num lock is on or the embedded
numeric keypad is enabled.
Maintenance and Service Guide
1–15
Product Description
The top components on the computer are shown below and
described in Table 1-6.
Top Components, Part 2
1–16
Maintenance and Service Guide
Product Description
Table 1-6
Top Components, Part 2
Item
Component
Function
1
Media button
If QuickPlay is not installed and the
computer is
■ On, the media button opens the music
program or Media menu, allowing you to
select a multimedia program.
■ Off, the media button does not function.
■ In standby, the media button resumes
from standby into Windows.
If QuickPlay is installed and the computer is
■ On, the media button opens the music
program or Media menu, allowing you to
select a multimedia program.
■ Off, the media button opens the music
program or the Media menu, allowing
you to select a multimedia program.
■ In standby, the media button resumes
from standby into Windows.
media button does not affect the
✎ The
hibernation file or the procedure for
restoring from hibernation.
2
DVD button
Maintenance and Service Guide
When the computer is
■ On, the DVD button opens the default
DVD program to start a DVD in the
optical drive.
■ Off, the DVD button opens QuickPlay to
start a DVD in the optical drive. If the
QuickPlay software is not installed, the
computer starts in Windows.
■ In hibernation, opens QuickPlay to start a
DVD in the optical drive. If the QuickPlay
software is not installed, the computer
resumes from hibernation.
1–17
Product Description
The top components on the computer are shown below and
described in Table 1-7.
Top Components, Part 3
Table 1-7
Top Components, Part 3
Item
Component
Function
1
Previous/Rewind
Button
When a disc is playing in the optical drive:
■ Press to play the previous track or
chapter.
■ Press fn+ this button to rewind.
2
Play/Pause button
When a disc is in the optical drive and is
■ Not playing, press to play the disc.
■ Playing, press to pause the disc.
3
Next/Fast Forward
button
When a disc is playing in the optical drive:
Stop button
When a disc is playing in the optical drive,
press to stop the current disc activity.
4
1–18
■ Press once to play the next track or
chapter.
■ Press fn+ this button to fast forward.
Maintenance and Service Guide
Product Description
The TouchPad components are shown below and described in
Table 1-8.
TouchPad Components
Table 1-8
TouchPad Components
Item
Component
Function
1
TouchPad on/off
button
Enables/disables the TouchPad.
2
TouchPad
Moves the pointer and selects or activates
items on the screen.
3
Left and right
TouchPad buttons
Function like the left and right buttons on an
external mouse.
4
TouchPad scroll zone
Scrolls upward or downward.
Maintenance and Service Guide
1–19
Product Description
The external components on the bottom of the computer are
shown below and described in Table 1-9.
Bottom Components
Table 1-9
Bottom Components
Item
Component
Function
1
Battery bay
Holds the battery
2
Battery release latch
Releases the battery from the battery
bay.
3
Optical drive
Reads an optical disc.
4
Hard drive bay
Holds the hard drive.
1–20
Maintenance and Service Guide
Product Description
Table 1-9
Bottom Components (Continued)
Item
Component
Function
5
Vents (4)
Enable airflow to cool internal
components.
Ä
To prevent overheating, do not
obstruct vents. Use the computer
only on a hard, flat surface. Do
not allow another hard surface,
such as an adjoining optional
printer, or a soft surface, such as
pillows or thick rugs, or clothing,
to block airflow.
computer fan starts up
✎ The
automatically to cool internal
components and prevent
overheating. It is normal for the
internal fan to cycle on and off
during routine operation.
6
Memory module
compartment
Contains the memory module slots.
7
Mini Card compartment
Holds a wireless LAN device
(select models only).
prevent an unresponsive
✎ To
system and the display of a
warning message, replace only
with a Mini Card device
authorized for use in the
computer by the governmental
agency that regulates wireless
devices in your country. If you
replace the device and then
receive a warning message,
remove the device to restore
computer functionality. Then
contact Customer Care through
the Help and Support Center.
Maintenance and Service Guide
1–21
Product Description
1.5 Design Overview
This section presents a design overview of key parts and features
of the computer. Refer to Chapter 3, “Illustrated Parts Catalog,”
to identify replacement parts, and Chapter 5, “Removal and
Replacement Procedures,” for disassembly steps.
The system board provides the following device connections:
Ä
■
AMD Turion and Mobile AMD Sempron processors or
Intel Core Duo and Core Solo processors
■
Audio
■
Display
■
ExpressCard
■
Fan
■
Hard drive
■
Keyboard and TouchPad
■
Memory module
■
Mini Card modules
CAUTION: To properly ventilate the computer, allow at least a 7.6-cm
(3-inch) clearance on the left and right sides of the computer.
The computer uses an electric fan for ventilation. The fan is
controlled by a temperature sensor and is designed to turn on
automatically when high temperature conditions exist. These
conditions are affected by high external temperatures, system
power consumption, power management/battery conservation
configurations, battery fast charging, and software. Exhaust air is
displaced through the ventilation grill located on the left side of
the computer.
1–22
Maintenance and Service Guide
2
Troubleshooting
Å
WARNING: Only authorized technicians trained by HP should repair
this equipment. All troubleshooting and repair procedures are detailed
to allow only subassembly-/module-level repair. Because of the
complexity of the individual boards and subassemblies, do not attempt
to make repairs at the component level or modifications to any printed
wiring board. Improper repairs can create a safety hazard. Any
indication of component replacement or printed wiring board
modification may void any warranty or exchange allowances.
2.1 Setup Utility
The Setup Utility is a ROM-based information and customization
utility that can be used even when your Windows operating
system is not working or will not load.
The utility reports information about the computer and provides
settings for startup, security, and other preferences.
1. Turn on or restart the computer in Windows.
2. Before Windows opens and while the “Press <F10> to enter
setup” prompt is displayed in the lower-left corner of the
screen, press f10.
Maintenance and Service Guide
2–1
Troubleshooting
2.2 Using the Setup Utility
Changing the Language of the Setup Utility
The following procedure explains how to change the language of
the Setup Utility. If the computer is not in the Setup Utility, begin
at step 1. If the computer is in the Setup Utility, begin at step 2.
1. To open the Setup Utility, turn on or restart the computer in
Windows, and then press f10 while the prompt, “Press <F10>
to enter setup,” is displayed in the lower-left corner of the
screen.
2. Use the arrow keys to select System Configuration >
Language, and then press enter.
3. Press f5 or f6 (or use the arrow keys) to select a language, and
then press enter to select a language.
4. When a confirmation prompt with your preference selected is
displayed, press enter to save your preference.
5. To set your preferences and exit the Setup Utility, press f10
and then follow the instructions on the screen.
Your preferences go into effect when the computer restarts in
Windows.
2–2
Maintenance and Service Guide
Troubleshooting
Navigating and Selecting in the Setup Utility
Because the Setup Utility is not Windows-based, it does not
support the TouchPad. Navigation and selection are by keystroke.
■
To choose a menu or a menu item, use the arrow keys.
■
To choose an item in a drop-down list or to toggle a field, for
example an Enable/Disable field, use either the arrow keys
or f5 or f6.
■
To select an item, press enter.
■
To close a text box or return to the menu display, press f1.
■
To display additional navigation and selection information
while the Setup Utility is open, press f1.
Displaying System Information
The following procedure explains how to display system
information in the Setup Utility. If the Setup Utility is not open,
begin at step 1. If the Setup Utility is open, begin at step 2.
1. To open the Setup Utility, turn on or restart the computer in
Windows, and then press f10 while the prompt, “Press <F10>
to enter setup,” is displayed in the lower-left corner of the
screen.
2. Access the system information by using the Main menu.
3. To close the Setup Utility without changing any settings, use
the arrow keys to select Exit > Exit Discarding Changes,
and then press enter. (The computer restarts in Windows.)
Maintenance and Service Guide
2–3
Troubleshooting
Restoring Default Settings in the
Setup Utility
The following procedure explains how to restore the Setup Utility
default settings. If the computer is not in the Setup Utility, begin
at step 1. If the computer is in the Setup Utility, begin at step 2.
1. To open the Setup Utility, turn on or restart the computer in
Windows, and then press f10 while the prompt, “Press <F10>
to enter setup,” is displayed in the lower-left corner of the
screen.
2. Select Exit > Load Setup Defaults, and then press f10.
3. When the Setup Confirmation is displayed, press enter to save
your preferences.
4. To set your preferences and exit the Setup Utility, press f10,
and then follow the instructions on the screen.
The Setup Utility default settings are set when you exit the
Setup Utility and go into effect when the computer restarts.
password, security, and language settings are not
✎ Your
changed when you restore the factory default settings.
Using Advanced Setup Utility Features
This guide describes the Setup Utility features recommended for
all users. For more information about the Setup Utility features
recommended for advanced users only, refer to the Help and
Support Center, which is accessible only when the computer is in
Windows.
The Setup Utility features available for advanced users include a
hard drive self-test, a Network Service Boot, and settings for boot
order preferences.
The “<F12> to boot from LAN” message that is displayed in the
lower-left corner of the screen each time the computer is started
or restarted in Windows or restored from hibernation is the
prompt for a Network Service Boot.
2–4
Maintenance and Service Guide
Troubleshooting
The “Press <ESC> to change boot order” message that is
displayed in the lower-left corner of the screen each time the
computer is started or restarted in Windows or restored from
hibernation is the prompt to change the boot order.
Closing the Setup Utility
You can close the Setup Utility with or without saving changes.
■
To close the Setup Utility and save your changes from the
current session, use either of the following procedures:
❏ Press f10, and then follow the instructions on the screen.
– or –
❏ If the Setup Utility menus are not visible, press esc to
return to the menu display. Then use the arrow keys to
select Exit > Exit Saving Changes, and then press enter.
When you use the f10 procedure, you are offered an option
to return to the Setup Utility. When you use the Exit
Saving Changes procedure, the Setup Utility closes when
you press enter.
❏ To close the Setup Utility without saving your changes
from the current session:
If the Setup Utility menus are not visible, press esc to
return to the menu display. Then use the arrow keys
to select Exit > Exit Discarding Changes, and then
press enter.
After the Setup Utility closes, the computer restarts in Windows.
Maintenance and Service Guide
2–5
Troubleshooting
2.3 Setup Utility Menus
The menu tables in this section provide an overview of Setup
Utility options.
of the Setup Utility menu listed in this chapter may not
✎ Some
be supported by your computer.
Selecting from the Main Menu
Table 2-1
Main Menu
Select
To Do This
System Information
■
■
■
View and change the system time and date.
View identification information about the
computer.
View specification information about the
processor, memory size, system BIOS, and
keyboard controller version (select models
only).
Selecting from the Security Menu
Table 2-2
Security Menu
Select
To Do This
Administrator password
Enter, change, or delete an administrator
password.
Power-on password
Enter, change, or delete a power-on password.
2–6
Maintenance and Service Guide
Troubleshooting
Selecting from the System
Configuration Menu
Table 2-3
System Configuration Menu
Select
To Do This
Language Support
Change the Setup Utility language.
Embedded WLAN Device
Radio
Enable/disable an embedded wireless LAN
device.
Embedded Bluetooth
Device (select models only)
Enable/disable an embedded Bluetooth® device
(select models only).
Enhanced SATA support
(select models only)
Enable/disable enhanced SATA mode.
Boot Options
Set the following boot options:
■ f10 and f12 Delay (sec.)—Set the delay for the
f10 and f12 functions of the Setup Utility in
intervals of 5 seconds each (0. 5, 10, 15, 20).
■ CD-ROM boot—Enable/disable boot from
CD-ROM.
■ Floppy boot—Enable/disable boot from Floppy.
■ Internal Network Adapter boot—Enable/disable
boot from Internal Network Adapter.
■ Boot Order—Set the boot order for:
❐ USB Floppy
❐ ATAPI CD/DVD ROM Drive
❐ Hard drive
❐ USB Diskette on Key
❐ USB Hard drive
❐ Network adapter
Maintenance and Service Guide
2–7
Troubleshooting
Selecting from the Diagnostics Menu
Table 2-4
Diagnostics Menu
Select
To Do This
Hard Disk Self Test
Run a comprehensive self-test on the hard drive.
models with two hard drives, this menu
✎ On
option is called the Primary Hard Disk Self
Test.
Secondary Hard Disk Self
Test (select models only)
2–8
Run a comprehensive self-test on a secondary
hard drive.
Maintenance and Service Guide
Troubleshooting
2.4 Troubleshooting Flowcharts
Table 2-5
Troubleshooting Flowcharts Overview
Flowchart
Description
2.1
“Flowchart 2.1—Initial Troubleshooting”
2.2
“Flowchart 2.2—No Power, Part 1”
2.3
“Flowchart 2.3—No Power, Part 2”
2.4
“Flowchart 2.4—No Power, Part 3”
2.5
“Flowchart 2.5—No Power, Part 4”
2.6
“Flowchart 2.6—No Video, Part 1”
2.7
“Flowchart 2.7—No Video, Part 2”
2.8
“Flowchart 2.8—Nonfunctioning Docking Device (if applicable)”
2.9
“Flowchart 2.9—No Operating System (OS) Loading”
2.10
“Flowchart 2.10—No OS Loading, Hard Drive, Part 1”
2.11
“Flowchart 2.11—No OS Loading, Hard Drive, Part 2”
2.12
“Flowchart 2.12—No OS Loading, Hard Drive, Part 3”
2.13
“Flowchart 2.13—No OS Loading, Diskette Drive”
Maintenance and Service Guide
2–9
Troubleshooting
Table 2-5
Troubleshooting Flowcharts Overview (Continued)
Flowchart
Description
2.14
“Flowchart 2.14—No OS Loading, Optical Drive”
2.15
“Flowchart 2.15—No Audio, Part 1”
2.16
“Flowchart 2.16—No Audio, Part 2”
2.17
“Flowchart 2.17—Nonfunctioning Device”
2.18
“Flowchart 2.18—Nonfunctioning Keyboard”
2.19
“Flowchart 2.19—Nonfunctioning Pointing Device”
2.20
“Flowchart 2.20—No Network/Modem Connection”
2–10
Maintenance and Service Guide
Troubleshooting
Flowchart 2.1—Initial Troubleshooting
Begin
troubleshooting.
N
Go to
Is there
power?
“Flowchart
2.2—No Power,
Part 1.”
Y
N
Check
LED board,
speaker
connections.
Beeps,
LEDs, or error
messages?
N
Y
Go to
All drives
working?
N
Go to
Is there video?
(no boot)
Y
“Flowchart
2.6—No Video,
Part 1.”
N
Keyboard/
pointing
device
working?
Y
N
Go to
Is the OS
loading?
N
Go to
Is there
sound?
Y
“Flowchart
2.9—No Operating
System (OS)
Loading.”
Y
“Flowchart
2.15—No Audio,
Part 1.”
Y
Maintenance and Service Guide
“Flowchart
2.17—Nonfunctioning Device.”
Go to
“Flowchart
2.18—Nonfunctioning Keyboard”
or “Flowchart
2.19—Nonfunctioning Pointing
Device.”
N
Connecting
to network
or modem?
Y
Go to
“Flowchart
2.20—No
Network/Modem
Connection.”
End
2–11
Troubleshooting
Flowchart 2.2—No Power, Part 1
No power
(power LED
is off).
Remove from
docking device
(if applicable).
N
N
Power up
on battery
power?
Go to
Power up
on battery
power?
Reset
power.*
“Flowchart
2.3—No Power,
Part 2.”
Y
Y
N
N
Power up
on AC
power?
Power up
on AC power?
Reset
power.*
Go to
“Flowchart
2.4—No Power,
Part 3.”
Y
Y
Y
Power up in
docking
device?
Done
*NOTES
1. On select models, there is a separate
reset button.
2. On select models, the computer can be
reset using the standby switch and either
the lid switch or the main power switch.
N
1. Reseat the power cables in the docking
device and at the AC outlet.
2. Ensure the AC power source is active.
3. Ensure that the power strip is working.
Y
Done
2–12
N
Power up
in docking
device?
Go to
“Flowchart
2.8—Nonfunctioning
Docking Device (if
applicable).”
Maintenance and Service Guide
Troubleshooting
Flowchart 2.3—No Power, Part 2
Continued from
“Flowchart
2.2—No Power,
Part 1.”
Visually check for
debris in battery
socket and clean
if necessary.
Y
Power on?
Done
N
Check battery by
recharging it,
moving it to
another computer,
or replacing it.
N
Replace
power supply
(if applicable).
Power on?
Y
N
Go to
Done
Power on?
“Flowchart
2.4—No Power,
Part 3.”
Y
Done
Maintenance and Service Guide
2–13
Troubleshooting
Flowchart 2.4—No Power, Part 3
Continued from
“Flowchart
2.3—No Power,
Part 2.”
Plug directly
into AC outlet.
Y
Power LED
on?
Done
N
Reseat AC adapter
in computer and
at power source.
Y
Power on?
Done
N
External
N
Try different
outlet.
Power outlet
active?
Y
Internal or
external AC
adapter?
Replace external
AC adapter.
N
Internal
Go to
“Flowchart
2.5—No Power,
Part 4.”
Replace
power cord.
Power on?
Y
Y
Done
Power on?
Done
N
2–14
Maintenance and Service Guide
Troubleshooting
Flowchart 2.5—No Power, Part 4
Continued from
“Flowchart
2.4—No Power,
Part 3.”
Open
computer.
Y
Loose or
damaged
parts?
N
Reseat loose
components and
boards and
replace damaged
items.
Close
computer and
retest.
N
Power on?
Y
Done
Replace the following items (if applicable). Check
computer operation after each replacement:
1. Internal DC-DC converter*
2. Internal AC adapter
3. Processor board*
4. System board*
*NOTE: Replace these items as a set to prevent
shorting out among components.
Maintenance and Service Guide
2–15
Troubleshooting
Flowchart 2.6—No Video, Part 1
No video.
Docking Device
Go to
Stand-alone
or docking
device?
*NOTE: To change from internal to
external display, use the hotkey
combination.
“Flowchart
2.7—No Video,
Part 2.”
Stand-alone
Internal or
external
display*?
Y
Adjust
brightness.
A
Adjust
brightness.
Press lid
switch to ensure
operation.
Y
Video OK?
Done
N
Internal
External
Video OK?
Y
Done
N
Video OK?
Done
N
Replace the following one at a time. Test after each replacement.
1. Cable between computer and computer display (if applicable)
2. Display
3. System board
Check for bent
pins on cable.
N
Video OK?
Y
Internal and
external
video OK?
Replace
system
board.
Y
Done
2–16
N
Try
another
display.
Done
Maintenance and Service Guide
Troubleshooting
Flowchart 2.7—No Video, Part 2
Continued from
“Flowchart
2.6—No Video,
Part 1.”
Remove
computer from
docking device,
if connected.
Adjust
display
brightness.
Check brightness
of external
monitor.
N
Y
Go to “A” in
“Flowchart
2.6—No Video,
Part 1.”
Video OK?
Y
Video OK?
Done
N
Check that computer is properly
seated in docking device,
for bent pins on cable,
and for monitor connection.
Try another
external
monitor.
Y
Video OK?
Y
Internal
and external
video OK?
Done
Done
N
N
Go to
Adjust external
monitor display.
Maintenance and Service Guide
“Flowchart
2.8—Nonfunctioning
Docking Device (if
applicable).”
2–17
Troubleshooting
Flowchart 2.8—Nonfunctioning Docking Device
(if applicable)
Nonfunctioning
docking device.
Reseat power
cord in docking
device and
power outlet.
Check voltage
setting on docking
device.
Reinstall
computer into
docking device.
Y
Reset monitor
cable connector at
docking device.
Docking
device
operating?
N
Y
Docking
device
operating?
N
Done
Done
Test replacement
docking device with
new computer.
Remove computer,
replace docking
device.
2–18
Maintenance and Service Guide
Troubleshooting
Flowchart 2.9—No Operating System (OS)
Loading
No OS
loading.*
Reseat power
cord in docking
device and
power outlet.
No OS loading from hard drive,
go to “Flowchart 2.10—No OS Loading,
Hard Drive, Part 1.”
No OS loading from diskette drive,
go to “Flowchart 2.13—No OS Loading,
Diskette Drive.”
No OS loading from optical drive,
go to “Flowchart 2.14—No OS Loading,
Optical Drive.”
No OS loading from network,
go to “Flowchart 2.20—No Network/Modem
Connection.”
*NOTE: Before beginning troubleshooting, always
check cable connections, cable ends, and drives
for bent or damaged pins.
Maintenance and Service Guide
2–19
Troubleshooting
Flowchart 2.10—No OS Loading, Hard Drive,
Part 1
OS not
loading from
hard drive.
Y
Nonsystem
disk message?
N
Go to
“Flowchart
2.11—No OS
Loading,
Hard Drive, Part 2.”
Reseat
external
hard drive.
Y
OS loading?
Done
N
N
Boot
from
CD?
N
Y
Boot
from
diskette?
Check the Setup
utility for correct
booting order.
Y
Change boot
priority through
the Setup Utility
and reboot.
N
Boot
from
hard drive?
N
Y
Boot
from
hard drive?
Done
Y
2–20
Go to
“Flowchart
2.13—No OS
Loading,
Diskette Drive.”
Go to
“Flowchart
2.17—Nonfunctioning
Device.”
Maintenance and Service Guide
Troubleshooting
Flowchart 2.11—No OS Loading, Hard Drive,
Part 2
Continued from
“Flowchart
2.10—No OS
Loading,
Hard Drive, Part 1.”
Reseat
hard drive.
N
1. Replace
hard drive.
2. Replace system
board.
Disc or
diskette in
drive?
Y
Y
Hard drive
accessible?
Done
N
Remove disc or
diskette and
reboot.
Run FDISK.
Y
Boot
from
hard drive?
N
Done
N
Hard drive
partitioned?
Y
N
Y
N
Go to
“Flowchart
2.13—No OS
Loading,
Diskette Drive.”
Boot
from diskette
drive?
Create partition,
and then format
hard drive to
bootable
C:\ prompt.
Hard drive
formatted?
Format hard drive
and bring to
a bootable
C:\ prompt.
Computer
booted?
Load OS using
Operating System disc
(if applicable).
Y
N
Y
Hard drive
accessible?
Y
Done
N
Go to
“Flowchart
2.12—No OS
Loading,
Hard Drive, Part 3.”
Maintenance and Service Guide
Go to
“Flowchart
2.12—No OS
Loading,
Hard Drive, Part 3.”
2–21
Troubleshooting
Flowchart 2.12—No OS Loading, Hard Drive,
Part 3
Continued from
“Flowchart
2.11—No OS
Loading,
Hard Drive, Part 2.”
N
System
files on hard
drive?
Install OS
and reboot.
Y
Y
Y
Virus
on
hard drive?
OS
loading from
hard drive?
Clean virus.
N
Done
N
Y
Run SCANDISK and
check for
bad sectors.
Diagnostics on
disc or diskette?
Replace
hard drive.
N
N
Can bad
sectors
be fixed?
Run diagnostics
and follow
recommendations.
Replace
hard drive.
Y
N
Boot from
hard drive?
Fix bad
sectors.
Replace
hard drive.
Y
Done
2–22
Maintenance and Service Guide
Troubleshooting
Flowchart 2.13—No OS Loading, Diskette Drive
Y
OS not loading
from
diskette drive.
Reseat
diskette drive.
OS
loading?
Done
N
Y
N
Bootable
diskette
in drive?
Nonsystem
disk message?
N
Y
N
Check diskette
for system files.
Try different
diskette.
Go to
Boot
from another
device?
“Flowchart
2.17—Nonfunctioning Device.”
Y
Y
N
Diskette
drive enabled
in the Setup
utility?
Nonsystem
disk error?
Enable drive
and cold boot
computer.
N
Y
Replace the following
components
individually, retesting
after each
replacement:
■ Diskette drive
■ System board
Y
Y
N
Install bootable
diskette and
reboot computer.
Is diskette
drive boot
order
correct?
Change boot
priority using
the Setup Utility.
OS
loading?
Reset the computer.
Refer to
Section 1.2,
“Resetting the
Computer,” for
Done
N
instructions.
Go to
“Flowchart
2.17—Nonfunctioning
Device.”
Maintenance and Service Guide
2–23
Troubleshooting
Flowchart 2.14—No OS Loading, Optical Drive
Y
No OS
loading from
CD-ROM or
DVD-ROM drive.
N
Install bootable
disc and
reboot
computer.
Bootable
disc in
drive?
Disc
in drive?
Y
N
Install
bootable disc.
Try another
bootable disc.
Y
Boots from
CD or DVD?
Done
N
Y
Boots from
CD or DVD?
Reseat
drive.
Done
N
N
Booting
from another
device?
Y
Y
Booting
order
correct?
N
Go to
“Flowchart
2.17—Nonfunctioning
Device.”
Reset the computer.
Refer to
Go to
Section 1.2,
“Resetting the
Computer,” for
“Flowchart
2.17—Nonfunctioning
Device.”
instructions.
Correct boot
order using
the Setup Utility.
2–24
Maintenance and Service Guide
Troubleshooting
Flowchart 2.15—No Audio, Part 1
Y
Turn up audio
internally or
externally.
No audio.
Audio?
Done
N
N
Y
Computer in
docking device
(if applicable)?
Go to
Internal
audio?
Undock
N
“Flowchart
2.16—No Audio,
Part 2.”
Y
Go to
Replace the
docking device.
“Flowchart
2.16—No Audio,
Part 2.”
Y
Go to
“Flowchart
2.17—Nonfunctioning
Device.”
Audio?
Done
N
Maintenance and Service Guide
2–25
Troubleshooting
Flowchart 2.16—No Audio, Part 2
Continued from
“Flowchart
2.15—No Audio,
Part 1.”
N
Audio
driver in OS
configured?
Reload
audio drivers.
Y
N
Correct
drivers for
application?
Load drivers and
set configuration
in OS.
Y
Connect to
external
speaker.
N
Audio?
Y
Replace audio
board and
speaker
connections
in computer
(if applicable).
Y
Audio?
Done
N
Replace the following components
individually, retesting after each
replacement:
■ Internal speakers
■ Audio board (if applicable)
2–26
Maintenance and Service Guide
Troubleshooting
Flowchart 2.17—Nonfunctioning Device
Nonfunctioning
device.
Reseat
device.
Unplug the nonfunctioning device from the computer
and inspect cables and plugs for bent or broken pins
or other damage.
Y
Clear
CMOS.
Fix or
replace
broken item.
Any physical
device detected?
N
Go to
Reattach device.
Close computer,
plug in power,
and reboot.
“Flowchart
2.9—No
Operating System
(OS) Loading.”
Replace hard drive.
N
Device
boots
properly?
N
Replace NIC.
If integrated NIC,
replace system
board.
Y
Device
boots
properly?
Y
Done
Maintenance and Service Guide
Replace diskette
drive.
Done
2–27
Troubleshooting
Flowchart 2.18—Nonfunctioning Keyboard
Keyboard
not operating
properly.
Connect computer
to good external
keyboard.
N
External
device
works?
Replace
system
board.
Y
Reseat internal
keyboard
connector
(if applicable).
N
Keyboard
operating
properly?
Replace internal
keyboard or
cable.
Y
Y
Keyboard
operating
properly?
Done
Done
N
Replace
system
board.
2–28
Maintenance and Service Guide
Troubleshooting
Flowchart 2.19—Nonfunctioning Pointing
Device
Pointing device
not operating
properly.
Connect computer
to good external
pointing device.
N
Replace
system
board.
External
device
works?
Y
Reseat internal
pointing device
connector
(if applicable).
N
Replace internal
pointing device
or cable.
Pointing device
operating
properly?
Y
Y
Pointing device
operating
properly?
Done
Done
N
Replace
system
board.
Maintenance and Service Guide
2–29
Troubleshooting
Flowchart 2.20—No Network/Modem
Connection
No network
or modem
connection.
N
Replace jack
or have jack
activated.
Network
or modem jack
active?
Y
Y
Connect
to nondigital
line.
Digital
line?
N
Y
N
NIC/modem
configured
in OS?
Network
or modem
connection
working?
Reload
drivers and
reconfigure.
Done
N
Y
Disconnect all
power from
the computer
and open.
Replace
NIC/modem
(if applicable).
Reseat NIC/modem
(if applicable).
Network
or modem
connection
working?
Y
Done
N
Replace
system
board.
2–30
Maintenance and Service Guide
3
Illustrated Parts Catalog
This chapter provides an illustrated parts breakdown and a
reference for spare part numbers and option part numbers.
3.1 Serial Number Location
When ordering parts or requesting information, provide the
computer serial number and model number located on the bottom
of the computer.
Serial Number Location
Maintenance and Service Guide
3–1
Illustrated Parts Catalog
3.2 Computer Major Components
Computer Major Components
3–2
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-1
Spare Parts: Computer Major Components
Spare Part
Number
Item
Description
1
14.0-inch, WXGA display assembly (includes
wireless antenna transceivers and cables)
417048-001
to Section 3.3, “Display Assembly Components,” for
✎ Refer
display assembly internal component spare part number
information.
2
Switch covers (include wireless button and light)
For use with full-featured computer models
For use with defeatured computer models
417079-001
417080-001
3
Power button board (includes power button
board cable)
417084-001
4
Keyboards
For use only with computer models using Intel processors:
Belgium
Greece
Israel
Korea
Latin America
Portugal
417068-A41
417068-151
417068-BB1
417068-AD1
417068-161
417068-131
Saudi Arabia
Switzerland
Taiwan
Thailand
Turkey
417068-171
417068-111
417068-AB1
417068-281
417068-141
For use with all computer models:
Brazil
Denmark
France
French Canada
Germany
International
Italy
417068-201
417068-081
417068-051
417068-121
417068-041
417068-B31
417068-061
Maintenance and Service Guide
Norway
Spain
Sweden/Finland
The United
Kingdom
The United States
417068-091
417068-071
417068-101
417068-031
417068-001
3–3
Illustrated Parts Catalog
Computer Major Components
3–4
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-1
Spare Parts: Computer Major Components (Continued)
Item
Description
5
Top cover rear strips
For use with full-featured computer models
For use with defeatured computer models
6
8a
8b
8c
8d
9a
9b
430466-001
417088-001
Top covers (include TouchPad)
For use with full-featured computer models
For use with defeatured computer models
7a
7b
Spare Part
Number
430467-001
417090-001
TouchPad
TouchPad bracket
430464-001
TouchPad cable (not illustrated)
417082-001
Plastics Kit
417073-001
Includes:
ExpressCard slot bezel
Hard drive cover (includes 2 captive screws, secured by C-clips)
Memory module compartment cover (includes 2 captive screws,
secured by C-clips)
Mini Card compartment cover (includes 1 captive screws, secured by
a C-clip)
Modem modules (include modem module cable)
For use with computer models using Intel processors
For use with computer models using AMD
processors
Modem module cable
417083-001
431852-001
10
ExpressCard assembly
417112-001
11
Speaker assembly
417089-001
Maintenance and Service Guide
3–5
Illustrated Parts Catalog
Computer Major Components
3–6
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-1
Spare Parts: Computer Major Components (Continued)
Item
Description
12
System boards
Spare Part
Number
For use with computer models using Intel processors:
■ PM/G72M-V for use with full-featured computer
models
■ GM for use with full-featured computer models
■ GMZ for use with defeatured computer models
417035-001
417036-001
417037-001
For use with computer models using AMD processors:
■ For use with full-featured computer models
■ For use with defeatured computer models
431483-001
431844-001
13
Wireless switch board (includes wireless switch
board cable)
417092-001
14
Audio/infrared board (includes audio/infrared
board cable)
417086-001
15
Processors (include thermal pad)
Intel Core Duo T2600 (2.16-GHz)
Intel Core Duo T2500 (2.00-GHz)
Intel Core Duo T2400 (1.83-GHz)
Intel Core Duo T2250 (1.73-GHz)
Intel Core Duo T2300 (1.66-GHz)
Intel Core Duo T2050 (1.60-GHz)
417044-001
417043-001
417042-001
430455-001
417041-001
430454-001
Intel Core Solo T1350 (1.80-GHz)
430456-001
Maintenance and Service Guide
3–7
Illustrated Parts Catalog
Computer Major Components
3–8
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-1
Spare Parts: Computer Major Components (Continued)
Item
Description
Spare Part
Number
15
Processors (include thermal pad)
(Continued)
AMD Turion ML-52 1.60-GHz
AMD Turion ML-50 1.60-GHz
431846-001
431845-001
Mobile AMD Sempron 3400+ (1.80-GHz)
Mobile AMD Sempron 3200+ (1.60-GHz)
431849-001
431484-001
16
Bluetooth® module (includes Bluetooth
module cable)
397923-001
17
Fan/heat sink assemblies (include thermal pads)
For use with computer models using Intel processors:
■ For use on UMA system boards
■ For use on discrete system boards
18
430463-001
417081-001
For use with computer models using AMD
processors
431851-001
Fan/heat sink assembly mounting bracket
(not illustrated)
417114-001
Power connector cables
For use with UMA system boards
For use only with computer models using Intel
processors
19
USB board (includes USB board cable)
20
Base enclosures
430462-001
430461-001
417085-001
For use with full-featured computer models
For use with defeatured computer models
417093-001
430469-001
Rubber Feet Kit (includes computer feet, not
illustrated)
417095-001
Maintenance and Service Guide
3–9
Illustrated Parts Catalog
Computer Major Components
3–10
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-1
Spare Parts: Computer Major Components (Continued)
Item
Description
21
Batteries
12-cell, 8.8-AHr
6-cell, 4.0-AHr
22
Spare Part
Number
417067-001
417066-001
Hard drives (include frame and connector)
For use only with computer models using Intel processors:
5400-rpm, 120-GB
417059-001
For use with all computer models:
5400-rpm, 100-GB
5400-rpm, 80-GB
5400-rpm, 60-GB
5400-rpm, 40-GB
23
RTC battery
24
Memory modules, 1-DIMM, DDR2
417058-001
417057-001
417056-001
430460-001
417076-001
PC2-5300, 667-MHz
1024 MB
512 MB
256 MB
417055-001
417054-001
417053-001
PC2-4200, 533-MHz
1024 MB
512 MB
256 MB
417052-001
417051-001
417050-001
Maintenance and Service Guide
3–11
Illustrated Parts Catalog
Computer Major Components
3–12
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-1
Spare Parts: Computer Major Components (Continued)
Spare Part
Number
Item
Description
25
Mini Card modules
For use with computer models using Intel processors:
■ 802.11b/g WLAN module for use in the countries
listed below. These countries are categorized as
most of the world (MOW 1).
Antigua &
Barbuda
Argentina
Australia
Bahamas
Barbados
Brunei
Canada
Chile
Dominican
Republic
Guam
Guatemala
Hong Kong
Panama
India
Indonesia
Malaysia
Mexico
New Zealand
■ 802.11b/g WLAN module for use in the countries
listed below. These countries are categorized as
most of the world (MOW 2).
Aruba
Austria
Azerbaijan
Bahrain
Belgium
Bermuda
Bulgaria
Cayman
Islands
Columbia
Croatia
Cyprus
The Czech
Republic
Denmark
Egypt
El Salvador
Estonia
Finland
France
Georgia
Germany
Greece
Hungary
Iceland
Ireland
Italy
Latvia
Lebanon
Maintenance and Service Guide
The Philippines
Poland
Portugal
Romania
Russia
Serbia and
Montenegro
Singapore
Slovakia
Liechtenstein
Lithuania
Luxembourg
Malta
Monaco
409407-001
Paraguay
Saudi Arabia
Taiwan
The United
States
Vietnam
409407-002
The
Netherlan
ds
Norway
Oman
Slovenia
South Africa
Spain
Sri Lanka
Sweden
Switzerland
Turkey
The United
Kingdom
Uzbekistan
3–13
Illustrated Parts Catalog
Computer Major Components
3–14
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-1
Spare Parts: Computer Major Components (Continued)
Spare Part
Number
Item
Description
25
Mini Card modules (Continued)
■ 802.11a/b/g WLAN module for use in the countries
listed below. These countries are categorized as
the rest of the world (ROW).
China
Ecuador
Haiti
Honduras
Pakistan
Peru
Qatar
South Korea
409497-001
Uruguay
Venezuela
For use with computer models using AMD processors:
■ 802.11a/b/g LJ WLAN module for use in
the United States and Canada
417377-001
■ 802.11a/b/g LJ WLAN module for use in the ROW
countries listed below:
417377-002
China
Ecuador
Haiti
Qatar
South Korea
Uruguay
Venezuela
■ 802.11b/g HS WLAN module for use in
the United States and Canada
416376-001
■ 802.11b/g HS WLAN module for use in the ROW
countries listed below:
416376-002
China
Ecuador
Haiti
26
Honduras
Pakistan
Peru
Honduras
Pakistan
Peru
Qatar
South Korea
Uruguay
Venezuela
Optical drives (include bezel)
DVD/CD-RW Combo Drive
DVD±RW/R and CD-RW Double-Layer Combo Drive
DVD±RW/R and CD-RW Double-Layer Combo Drive
with LightScribe
Maintenance and Service Guide
417060-001
417061-001
417062-001
3–15
Illustrated Parts Catalog
3.3 Display Assembly Components
Display Assembly Components
3–16
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-2
Display Assembly Components
Spare Part Number Information
Spare Part
Number
Item
Description
1a
1b
1c
Display Plastics Kit
For use with full-featured computer models
For use with defeatured computer models
Includes:
■ Display bezel
■ Microphone
■ Display enclosure
2
Display inverter
417097-001
3
Web camera (includes Web camera bracket)
417113-001
4
Display panels
For use with full-featured computer models
For use with defeatured computer models
430457-001
430458-001
5
Wireless antenna transceivers and cables
417106-001
6
Display Hinge Kit (includes left and right
display hinges)
For use with full-featured computer models
For use with defeatured computer models
430473-001
417102-001
7
430471-001
417100-001
Display Cable Kit (includes the Web camera cable,
item #7)
417099-001
Display lid switch module (for use only with
computer models using Intel processors;
not illustrated)
417087-001
Display Label Kit (not illustrated)
417110-001
Display Screw Kit (includes screws and rubber screw
covers, not illustrated)
417104-001
Maintenance and Service Guide
3–17
Illustrated Parts Catalog
3.4 Mass Storage Devices
Mass Storage Devices
3–18
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-3
Mass Storage Devices
Spare Part Number Information
Item
Description
1
Hard drives (include frame and connector)
5400-rpm, 120-GB
5400-rpm, 100-GB
5400-rpm, 80-GB
5400-rpm, 60-GB
5400-rpm, 40-GB
2
Spare Part
Number
417059-001
417058-001
417057-001
417056-001
430460-001
Optical drives
DVD/CD-RW Combo Drive
DVD±RW/R and CD-RW Double-Layer Combo
Drive
DVD±RW/R and CD-RW Double-Layer Combo
Drive with LightScribe
USB digital drive (not illustrated)
Maintenance and Service Guide
417060-001
417061-001
417062-001
364727-001
3–19
Illustrated Parts Catalog
3.5 Plastics Kit
Plastics Kit Contents
Table 3-4
Plastics Kit
Spare Part Number Information
Item
1
2
3
4
3–20
Description
Spare Part
Number
Plastics Kit
417073-001
Includes:
Mini Card compartment cover (includes 1 captive screws, secured by
a C-clip)
Hard drive cover (includes 2 captive screws, secured by C-clips)
Memory module compartment cover (includes 2 captive screws,
secured by C-clips)
ExpressCard slot bezel
Maintenance and Service Guide
Illustrated Parts Catalog
3.6 Cable Kit
Cable Kit Contents
Table 3-5
Cable Kit
Spare Part Number Information
Item
1
2
3
4
Description
Spare Part
Number
Cable Kit
417075-001
Includes:
LED board cable
TouchPad cable
USB board cable (includes num lock light cable)
Bluetooth module cable
Maintenance and Service Guide
3–21
Illustrated Parts Catalog
3.7 Miscellaneous
Table 3-6
Spare Parts: Miscellaneous (not illustrated)
Description
Spare Part
Number
Analog TV tuner
407941-001
Composite S-Video and audio input cable
407939-001
DVB-T TV tuner
412175-001
DVB-T TV tuner antenna
412176-001
Earbud headset
371693-003
HP 65W AC Adapter
409843-001
HP Remote Control
407313-001
RF cable
408485-001
RF input adapter cable
407940-001
USB infrared receiver
408483-001
USB travel mouse
309674-001
Wireless laser mouse
430958-001
3–22
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-6
Spare Parts: Miscellaneous (not illustrated) (Continued)
Spare Part
Number
Description
Screw Kit (includes the following screws; refer to
Appendix A, “Screw Listing,” for more information on screw
specifications and usage)
■
■
■
■
■
■
Phillips PM3.0×3.0 screw
Phillips PM2.5×9.0 screw
Phillips PM2.5×7.0 screw
Black Phillips PM2.5×5.0 screw
Silver Phillips PM2.5×5.0 screw
Phillips PM2.0×5.0 captive screw
Maintenance and Service Guide
417108-001
■ Phillips PM2.0×13.0 spring-loaded
shoulder screw
■ Phillips PM2.0×9.0 spring-loaded
shoulder screw
■ Phillips PM2.0×8.0 screw
■ Phillips PM2.0×4.0 screw
■ Phillips PM2.0×3.0 screw
■ Phillips PM2.0×2.0 screw
3–23
Illustrated Parts Catalog
Table 3-6
Spare Parts: Miscellaneous (not illustrated) (Continued)
Spare Part
Number
Description
Power cords for use in:
Australia and New Zealand
383496-011
Belgium, Europe, Finland, France, Germany, Greece,
the Netherlands, Norway, Portugal, Spain, and Sweden
383496-021
Brazil
383496-201
Canada, French Canada, Latin America, Thailand, and the
United States
383496-001
Denmark
383496-081
Hong Kong and the United Kingdom
383496-031
Israel
383496-BB1
Italy
383496-061
Korea
383496-AD1
People’s Republic of China
383496-AA1
Switzerland
383496-111
Taiwan
383496-AB1
3–24
Maintenance and Service Guide
Illustrated Parts Catalog
3.8 Sequential Part Number Listing
Table 3-7
Spare Parts: Sequential Part Number Listing
Spare Part
Number
Description
309674-001
USB travel mouse
364727-001
USB digital drive (not illustrated)
371693-003
Earbud headset (glossy black)
383496-001
Power cord for use in Canada, French Canada, Latin America,
Thailand, and the United States
383496-011
Power cord for use in Australia and New Zealand
383496-021
Power cord for use in Belgium, Europe, Finland, France,
Germany, Greece, the Netherlands, Norway, Portugal, Spain,
and Sweden
383496-031
Power cord for use in Hong Kong and the United Kingdom
383496-061
Power cord for use in Italy
383496-081
Power cord for use in Denmark
383496-111
Power cord for use in Switzerland
383496-201
Power cord for use in Brazil
383496-AA1
Power cord for use in the People’s Republic of China
383496-AB1
Power cord for use in Taiwan
383496-AD1
Power cord for use in Korea
383496-BB1
Power cord for use in Israel
397923-001
Bluetooth® module (includes Bluetooth module cable)
407313-001
HP Remote Control
Maintenance and Service Guide
3–25
Illustrated Parts Catalog
Table 3-7
Spare Parts: Sequential Part Number Listing (Continued)
Spare Part
Number
Description
407939-001
Composite S-Video and audio input cable
407940-001
RF input adapter cable
407941-001
Analog TV tuner
408483-001
USB infrared receiver
408485-001
RF cable
409407-001
802.11b/g WLAN Mini Card module for use only with
computer models using Intel processors in the MOW1
countries listed below:
Antigua &
Barbuda
Argentina
Australia
Bahamas
Barbados
Brunei
3–26
Canada
Chile
Dominican
Republic
Guam
Guatemala
Hong Kong
Panama
India
Indonesia
Malaysia
Mexico
New Zealand
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-7
Spare Parts: Sequential Part Number Listing (Continued)
Spare Part
Number
409407-002
Description
802.11b/g WLAN Mini Card module for use only with
computer models using Intel processors in the MOW2
countries listed below:
Aruba
Austria
Azerbaijan
Bahrain
Belgium
Bermuda
Bulgaria
Cayman Islands
Columbia
Croatia
Cyprus
The Czech
Republic
Denmark
409497-001
Egypt
El Salvador
Estonia
Finland
France
Georgia
Germany
Greece
Hungary
Iceland
Ireland
Italy
Latvia
Lebanon
The Philippines
Poland
Portugal
Romania
Russia
Serbia and
Montenegro
Singapore
Slovakia
Liechtenstein
Lithuania
Luxembourg
Malta
Monaco
802.11a/b/g WLAN Mini Card module for use only with
computer models using Intel processors in the ROW countries
listed below:
China
Ecuador
Haiti
Honduras
Pakistan
Peru
409843-001
HP 65W AC Adapter
412175-001
DVB-T TV tuner
412176-001
DVB-T TV tuner antenna
Maintenance and Service Guide
Qatar
South Korea
3–27
Illustrated Parts Catalog
Table 3-7
Spare Parts: Sequential Part Number Listing (Continued)
Spare Part
Number
Description
416376-001
802.11b/g HS WLAN Mini Card module for use only with
computer models using AMD processors in the United States
and Canada
416376-002
802.11b/g HS WLAN Mini Card module for use only with
computer models using AMD processors in the ROW
countries listed below:
China
Ecuador
Haiti
Honduras
Pakistan
Peru
Qatar
South Korea
416377-001
802.11a/b/g LJ WLAN Mini Card module for use only with
computer models using AMD processors in the United States
and Canada
416377-002
802.11a/b/g LJ WLAN Mini Card module for use with
computer models using AMD processors in the ROW
countries listed below:
China
Ecuador
Haiti
Honduras
Pakistan
Peru
Qatar
South Korea
417035-001
PM/G72M-V system board for use only with full-featured
computer models using Intel processors
417036-001
GM system board for use only with full-featured computer
models using Intel processors
417037-001
GMZ system board for use only with defeatured computer
models using Intel processors
417041-001
Intel Core Duo T2300 (1.66-GHz) processor (includes
thermal pad)
417042-001
Intel Core Duo T2400 (1.83-GHz) processor (includes
thermal pad)
3–28
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-7
Spare Parts: Sequential Part Number Listing (Continued)
Spare Part
Number
Description
417043-001
Intel Core Duo T2500 (2.00-GHz) processor (includes
thermal pad)
417044-001
Intel Core Duo T2600 (2.16-GHz) processor (includes
thermal pad)
417048-001
14.0-inch, WXGA display assembly (includes wireless
antenna transceivers and cables)
417050-001
1-DIMM, DDR2, PC2-4200, 533-MHz, 256-MB
memory module
417051-001
1-DIMM, DDR2, PC2-4200, 533-MHz, 512-MB
memory module
417052-001
1-DIMM, DDR2, PC2-4200, 533-MHz, 1024-MB
memory module
417053-001
1-DIMM, DDR2, PC2-5300, 667-MHz, 256-MB
memory module
417054-001
1-DIMM, DDR2, PC2-5300, 667-MHz, 512-MB
memory module
417055-001
1-DIMM, DDR2, PC2-5300, 667-MHz, 1024-MB
memory module
417056-001
5400-rpm, 60-GB hard drive (includes frame and connector)
417057-001
5400-rpm, 80-GB hard drive (includes frame and connector)
417058-001
5400-rpm, 100-GB hard drive (includes frame and connector)
417059-001
5400-rpm, 120-GB hard drive for use only with computer
models using Intel processors (includes frame and connector)
417060-001
DVD/CD-RW Combo Drive
417061-001
DVD±RW/R and CD-RW Double-Layer Combo Drive
417062-001
DVD±RW/R and CD-RW Double-Layer Combo Drive with
LightScribe
Maintenance and Service Guide
3–29
Illustrated Parts Catalog
Table 3-7
Spare Parts: Sequential Part Number Listing (Continued)
Spare Part
Number
Description
417066-001
6-cell, 4.0-AHr battery
417067-001
12-cell, 8.8-AHr battery
417068-001
Keyboard for use in the United States
417068-031
Keyboard for use in the United Kingdom
417068-041
Keyboard for use in Germany
417068-051
Keyboard for use in France
417068-061
Keyboard for use in Italy
417068-071
Keyboard for use in Spain
417068-081
Keyboard for use in Denmark
417068-091
Keyboard for use in Norway
417068-101
Keyboard for use in Sweden/Finland
417068-111
Keyboard for use in Switzerland
417068-121
Keyboard for use in French Canada
417068-131
Keyboard for use in Portugal
417068-141
Keyboard for use in Turkey
417068-151
Keyboard for use in Greece
417068-161
Keyboard for use in Latin America
417068-171
Keyboard for use in Saudi Arabia
417068-201
Keyboard for use in Brazil
417068-281
Keyboard for use in Thailand
417068-A41
Keyboard for use in Belgium
417068-AB1
Keyboard for use in Taiwan
3–30
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-7
Spare Parts: Sequential Part Number Listing (Continued)
Spare Part
Number
Description
417068-AD1
Keyboard for use in Korea
417068-B31
Keyboard for use internationally
417068-BB1
Keyboard for use in Israel
417073-001
Plastics Kit
417075-001
Cable Kit
417076-001
RTC battery
417079-001
Switch cover for use with full-featured computer models
(include wireless button and light)
417080-001
Switch cover for use with defeatured computer models
(includes wireless button and light)
417081-001
Fan/heat sink assembly (include thermal pads) for use only on
computer models using Intel processors
417082-001
TouchPad cable
417083-001
Modem module for use only on computer models using
Intel processors
417084-001
Power button board (includes power button board cable)
417085-001
USB board (includes USB board cable)
417086-001
Audio/infrared board (includes audio/infrared board cable)
417087-001
Display lid switch module
417088-001
Top cover rear strip for use with defeatured computer models
417089-001
Speaker assembly
417090-001
Top cover for use with defeatured computer models (includes
TouchPad)
417092-001
Wireless switch board (includes wireless switch board cable)
Maintenance and Service Guide
3–31
Illustrated Parts Catalog
Table 3-7
Spare Parts: Sequential Part Number Listing (Continued)
Spare Part
Number
Description
417093-001
Base enclosure for use with defeatured computer models
417095-001
Rubber Feet Kit (includes computer feet])
417097-001
Display inverter
417099-001
Display Cable Kit (includes the Web camera cable)
417100-001
Display Plastics Kit for use with defeatured computer models
(includes display bezel, microphone, and display enclosure)
417102-001
Display Hinge Kit (includes left and right display hinges) for
use with defeatured computer models
417104-001
Display Screw Kit (includes screws and rubber screw covers)
417106-001
Wireless antenna transceivers and cables
417108-001
Screw Kit
417110-001
Display Label Kit
417112-001
ExpressCard assembly
417113-001
Web camera (includes bracket)
417114-001
Fan/heat sink assembly mounting bracket
430454-001
Intel Core Duo T2050 (1.60-GHz) processor (includes
thermal pad)
430455-001
Intel Core Duo T2250 (1.73-GHz) processor (includes
thermal pad)
430456-001
Intel Core Solo T1350 (1.80-GHz) processor (includes
thermal pad)
430457-001
Display panels for use with full-featured computer models
430458-001
Display panels for use with defeatured computer models
430460-001
5400-rpm, 40-GB hard drive (includes frame and connector)
3–32
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-7
Spare Parts: Sequential Part Number Listing (Continued)
Spare Part
Number
Description
430461-001
Power connector cable for use only on computer models using
Intel processors
430462-001
Power connector cable for use with UMA system boards
430463-001
Fan/heat sink assembly (include thermal pads) for use on
UMA system boards
430464-001
TouchPad
430466-001
Top cover rear strip for use with full-featured computer models
430467-001
Top cover for use with full-featured computer models
(includes TouchPad)
430469-001
Base enclosure for use with defeatured computer models
430471-001
Display Plastics Kit for use with full-featured computer models
(includes display bezel, microphone, and display enclosure)
430473-001
Display Hinge Kit (includes left and right display hinges) for
use with full-featured computer models
430958-001
Wireless laser mouse
431843-001
System board for use only with full-featured computer models
using AMD processors
431844-001
System board for use with defeatured computer models using
AMD processors
431845-001
AMD Turion ML-50 1.60-GHz processor (includes
thermal pad)
431846-001
AMD Turion ML-52 1.60-GHz processor (includes
thermal pad)
431848-001
Mobile AMD Sempron 3200+ (1.60-GHz) processor (includes
thermal pad)
Maintenance and Service Guide
3–33
Illustrated Parts Catalog
Table 3-7
Spare Parts: Sequential Part Number Listing (Continued)
Spare Part
Number
Description
431849-001
Mobile AMD Sempron 3400+ (1.80-GHz) processor (includes
thermal pad)
431851-001
Fan/heat sink assembly for use only on computer models
using AMD processors (includes thermal pad)
431852-001
Modem module for use only on computer models using
AMD processors
3–34
Maintenance and Service Guide
4
Removal and Replacement
Preliminaries
This chapter provides essential information for proper and
safe removal and replacement service.
4.1 Tools Required
You will need the following tools to complete the removal and
replacement procedures:
■ Magnetic screwdriver
■ Phillips P0 and P1 screwdrivers
■ Flat-bladed screwdriver
Maintenance and Service Guide
4–1
Removal and Replacement Preliminaries
4.2 Service Considerations
The following sections include some of the considerations
that you should keep in mind during disassembly and assembly
procedures.
you remove each subassembly from the computer, place
✎ As
the subassembly (and all accompanying screws) away from
the work area to prevent damage.
Plastic Parts
Using excessive force during disassembly and reassembly can
damage plastic parts. Use care when handling the plastic parts.
Apply pressure only at the points designated in the maintenance
instructions.
Cables and Connectors
Ä
CAUTION: When servicing the computer, ensure that cables are
placed in their proper locations during the reassembly process.
Improper cable placement can damage the computer.
Cables must be handled with extreme care to avoid damage.
Apply only the tension required to unseat or seat the cables
during removal and insertion. Handle cables by the connector
whenever possible. In all cases, avoid bending, twisting, or
tearing cables. Ensure that cables are routed in such a way that
they cannot be caught or snagged by parts being removed or
replaced. Handle flex cables with extreme care; these cables
tear easily.
4–2
Maintenance and Service Guide
Removal and Replacement Preliminaries
4.3 Preventing Damage to
Removable Drives
Removable drives are fragile components that must be handled
with care. To prevent damage to the computer, damage to a
removable drive, or loss of information, observe the following
precautions:
■ Before removing or inserting a hard drive, shut down the
computer. If you are unsure whether the computer is off or
in Hibernation, turn the computer on, and then shut it down
through the operating system.
■ Before removing a diskette drive or optical drive, ensure that
a diskette or disc is not in the drive and ensure that the optical
drive tray is closed.
■ Before handling a drive, ensure that you are discharged of
static electricity. While handling a drive, avoid touching the
connector.
■ Handle drives on surfaces covered with at least one inch of
shock-proof foam.
■ Avoid dropping drives from any height onto any surface.
■ After removing a hard drive, CD-ROM drive, or a diskette
drive, place it in a static-proof bag.
■ Avoid exposing a hard drive to products that have magnetic
fields, such as monitors or speakers.
■ Avoid exposing a drive to temperature extremes or liquids.
■ If a drive must be mailed, place the drive in a bubble pack
mailer or other suitable form of protective packaging and label
the package, “FRAGILE: Handle With Care.”
Maintenance and Service Guide
4–3
Removal and Replacement Preliminaries
4.4 Preventing Electrostatic Damage
Many electronic components are sensitive to electrostatic
discharge (ESD). Circuitry design and structure determine the
degree of sensitivity. Networks built into many integrated circuits
provide some protection, but in many cases, the discharge
contains enough power to alter device parameters or melt
silicon junctions.
A sudden discharge of static electricity from a finger or other
conductor can destroy static-sensitive devices or microcircuitry.
Often the spark is neither felt nor heard, but damage occurs.
An electronic device exposed to electrostatic discharge might not
be affected at all and can work perfectly throughout a normal
cycle. Or the device might function normally for a while, then
degrade in the internal layers, reducing its life expectancy.
4–4
Maintenance and Service Guide
Removal and Replacement Preliminaries
4.5 Packaging and Transporting
Precautions
Use the following grounding precautions when packaging and
transporting equipment:
■ To avoid hand contact, transport products in static-safe
containers, such as tubes, bags, or boxes.
■ Protect all electrostatic-sensitive parts and assemblies with
conductive or approved containers or packaging.
■ Keep electrostatic-sensitive parts in their containers until
the parts arrive at static-free workstations.
■ Place items on a grounded surface before removing items
from their containers.
■ Always be properly grounded when touching a sensitive
component or assembly.
■ Store reusable electrostatic-sensitive parts from assemblies
in protective packaging or nonconductive foam.
■ Use transporters and conveyors made of antistatic belts and
roller bushings. Ensure that mechanized equipment used for
moving materials is wired to ground and that proper materials
are selected to avoid static charging. When grounding is not
possible, use an ionizer to dissipate electric charges.
Maintenance and Service Guide
4–5
Removal and Replacement Preliminaries
4.6 Workstation Precautions
Use the following grounding precautions at workstations:
■ Cover the workstation with approved static-shielding material
(refer to Table 4-2, “Static-Shielding Materials”).
■ Use a wrist strap connected to a properly grounded work
surface and use properly grounded tools and equipment.
■ Use conductive field service tools, such as cutters,
screwdrivers, and vacuums.
■ When using fixtures that must directly contact dissipative
surfaces, only use fixtures made of static-safe materials.
■ Keep the work area free of nonconductive materials, such
as ordinary plastic assembly aids and Styrofoam.
■ Handle electrostatic-sensitive components, parts, and
assemblies by the case or PCM laminate. Handle these
items only at static-free workstations.
■ Avoid contact with pins, leads, or circuitry.
■ Turn off power and input signals before inserting or removing
connectors or test equipment.
4–6
Maintenance and Service Guide
Removal and Replacement Preliminaries
4.7 Grounding Equipment and
Methods
Grounding equipment must include either a wrist strap or a
foot strap at a grounded workstation.
■ When seated, wear a wrist strap connected to a grounded
system. Wrist straps are flexible straps with a minimum of
one megohm ±10% resistance in the ground cords. To provide
proper ground, wear a strap snugly against the skin at all times.
On grounded mats with banana-plug connectors, use alligator
clips to connect a wrist strap.
■ When standing, use foot straps and a grounded floor mat.
Foot straps (heel, toe, or boot straps) can be used at standing
workstations and are compatible with most types of shoes
or boots. On conductive floors or dissipative floor mats, use
foot straps on both feet with a minimum of one megohm
resistance between the operator and ground. To be effective,
the conductive strips must be worn in contact with the skin.
Other grounding equipment recommended for use in preventing
electrostatic damage includes
■ Antistatic tape.
■ Antistatic smocks, aprons, and sleeve protectors.
■ Conductive bins and other assembly or soldering aids.
■ Nonconductive foam.
■ Conductive tabletop workstations with ground cords of
one megohm resistance.
■ Static-dissipative tables or floor mats with hard ties to
the ground.
■ Field service kits.
■ Static awareness labels.
■ Material-handling packages.
■ Nonconductive plastic bags, tubes, or boxes.
■ Metal tote boxes.
■ Electrostatic voltage levels and protective materials.
Maintenance and Service Guide
4–7
Removal and Replacement Preliminaries
Table 4-1 shows how humidity affects the electrostatic voltage
levels generated by different activities.
Table 4-1
Typical Electrostatic Voltage Levels
Relative Humidity
Event
10%
40%
55%
Walking across carpet
35,000 V
15,000 V
7,500 V
Walking across vinyl floor
12,000 V
5,000 V
3,000 V
Motions of bench worker
6,000 V
800 V
400 V
Removing DIPS from plastic tube
2,000 V
700 V
400 V
Removing DIPS from vinyl tray
11,500 V
4,000 V
2,000 V
Removing DIPS from Styrofoam
14,500 V
5,000 V
3,500 V
Removing bubble pack from PCB
26,500 V
20,000 V
7,000 V
Packing PCBs in foam-lined box
21,000 V
11,000 V
5,000 V
✎ A product can be degraded by as little as 700 V.
Table 4-2 lists the shielding protection provided by antistatic
bags and floor mats.
Table 4-2
Static-Shielding Materials
Material
Use
Voltage Protection Level
Antistatic plastic
Bags
1,500 V
Carbon-loaded plastic
Floor mats
7,500 V
Metallized laminate
Floor mats
5,000 V
4–8
Maintenance and Service Guide
5
Removal and Replacement
Procedures
This chapter provides removal and replacement procedures.
There are as many as 100 screws, in 13 different sizes, that must
be removed, replaced, or loosened when servicing the computer.
Make special note of each screw size and location during removal
and replacement.
Refer to Appendix A, “Screw Listing,” for detailed information
on screw sizes, locations, and usage.
Maintenance and Service Guide
5–1
Removal and Replacement Procedures
5.1 Serial Number
Report the computer serial number to HP when requesting
information or ordering spare parts. The serial number is
located on the bottom of the computer.
Serial Number Location
5–2
Maintenance and Service Guide
Removal and Replacement Procedures
5.2 Disassembly Sequence Chart
Use the chart below to determine the section number to be
referenced when removing computer components.
Disassembly Sequence Chart
Section
Description
5.3
Preparing the Computer for
Disassembly
# of Screws Removed
Battery
0
5.4
Hard Drive
2 loosened to remove the hard
drive cover
2 removed to remove the
hard drive
4 removed to disassemble the
hard drive
5.5
RTC Battery
0
5.6
Computer Feet
0
5.7
Memory Module
2 loosened to remove the
memory module compartment
cover
5.8
Mini Card Module
1 loosened to remove the
Mini Card module
compartment cover
2 removed to remove the
Mini Card
Ä
5.9
To prevent an unresponsive system and the display of a
warning message, install only a Mini Card device
authorized for use in your computer by the governmental
agency that regulates wireless devices in your country. If
you install a device and then receive a warning message,
remove the device to restore computer functionality. Then
contact Customer Care.
Optical Drive
Maintenance and Service Guide
1 to remove the optical drive
2 to remove the optical drive
bracket
5–3
Removal and Replacement Procedures
Disassembly Sequence Chart (Continued)
Section
Description
# of Screws Removed
5.10
Keyboard
3
5.11
Switch Cover
4 to remove the switch cover
2 to remove the power switch
board
5.12
Display Assembly
Display bezel
Web camera
Display inverter
Display hinges
Display panel
Wireless antenna transceivers
Microphones
Web camera cable
5
6
3
2
4
0
2
0
0
5.13
Top Cover
18
5.14
TouchPad
7
5.15
Wireless Switch Board
2
5.16
Modem Module
2
5.17
Audio/Infrared Board
2
5.18
Bluetooth Module
2
5.19
USB Board
1
5.20
Speaker Assembly
3
5.21
Display Lid Switch Module
2 to remove the top cover
rear strip
1 to remove the display lid
switch module
5.22
System Board
2
5.23
Power Connector Cable
1
5–4
Maintenance and Service Guide
Removal and Replacement Procedures
Disassembly Sequence Chart (Continued)
Section
Description
# of Screws Removed
5.24
ExpressCard Assembly
4
5.25
Fan/Heat Sink Assembly
5 loosened
5.26
Processor
1 loosened
5.3 Preparing the Computer for
Disassembly
Before you begin any removal or installation procedures:
1. Shut down the computer. If you are unsure whether the
computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
Battery Spare Part Number Information
12-cell, 8.8-AHr
6-cell, 4.0-AHr
417067-001
417066-001
4. Remove the battery by following these steps:
a. Turn the computer upside down with the front panel
toward you.
Maintenance and Service Guide
5–5
Removal and Replacement Procedures
b. Slide and hold the battery release latch 1 to the left.
(The front edge of the battery disengages from
the computer.)
c. Lift the front edge of the battery 2 up and swing it back.
d. Remove the battery.
Removing the Battery
Reverse the above procedure to install the battery.
5–6
Maintenance and Service Guide
Removal and Replacement Procedures
5.4 Hard Drive
Hard Drive Spare Part Number Information
For use only with computer models using Intel processors:
5400-rpm, 120-GB
417059-001
For use with all computer models:
5400-rpm, 100-GB
5400-rpm, 80-GB
5400-rpm, 60-GB
5400-rpm, 40-GB
417058-001
417057-001
417056-001
430460-001
1. Prepare the computer for disassembly (refer to Section 5.3).
Maintenance and Service Guide
5–7
Removal and Replacement Procedures
2. Loosen the two Phillips PM2.0×5.0 screws 1 that secure the
hard drive cover to the computer.
3. Lift the left side of the cover 2 and swing it to the right.
4. Remove the hard drive cover.
hard drive cover is included in the Plastics Kits, spare part
✎ The
number 417073-001.
Removing the Hard Drive Cover
5–8
Maintenance and Service Guide
Removal and Replacement Procedures
5. Remove the two black Phillips PM2.5×5.0 screws 1 that
secure the hard drive to the computer.
6. Use the mylar tab 2 to lift the hard drive 3 until it
disconnects from the computer.
7. Remove the hard drive from the hard drive bay.
Removing the Hard Drive
Maintenance and Service Guide
5–9
Removal and Replacement Procedures
8. Remove the four Phillips PM3.0×3.0 screws 1 that secure
the hard drive frame to the hard drive.
9. Lift the frame 2 straight up to remove if from the hard drive.
Removing the Hard Drive Frame and Connector
Reverse the above procedure to install and reassemble the
hard drive.
5–10
Maintenance and Service Guide
Removal and Replacement Procedures
5.5 RTC Battery
RTC Battery Spare Part Number Information
RTC battery
417076-001
1. Prepare the computer for disassembly (refer to Section 5.3).
2. Remove the hard drive cover (Section 5.4).
3. Disconnect the RTC battery cable 1 from the system board.
4. Remove the RTC battery 2.
Replacing the RTC Battery
Maintenance and Service Guide
5–11
Removal and Replacement Procedures
5.6 Computer Feet
The computer feet are adhesive-backed rubber pads. The feet are
included in the Rubber Feet Kit, spare part number 417095-001.
The feet attach to the base enclosure in the locations illustrated
below.
Replacing the Computer Feet
5–12
Maintenance and Service Guide
Removal and Replacement Procedures
5.7 Memory Module
Memory Module Spare Part Number Information
PC2-5300, 667-MHz
1024-MB
512-MB
256-MB
417055-001
417054-001
417053-001
PC2-4200, 533-MHz
1024-MB
512-MB
256-MB
417052-001
417051-001
417050-001
1. Prepare the computer for disassembly (refer to Section 5.3).
Maintenance and Service Guide
5–13
Removal and Replacement Procedures
2. Loosen the two Phillips PM2.0×5.0 screws 1 that secure the
memory module compartment cover to the computer.
3. Lift the right edge of the memory module compartment
cover 2, and then swing it to the left.
4. Remove the memory module compartment cover.
memory module compartment cover is included in the
✎ The
Plastics Kit, spare part number 417073-001.
Removing the Memory Module Compartment Cover
5–14
Maintenance and Service Guide
Removal and Replacement Procedures
5. Spread the retaining tabs 1 on each side of the memory
module socket to release the memory module. (The edge of
the module opposite the socket rises away from the
computer.)
6. Slide the module 2 away from the socket at an angle.
modules are designed with a notch 3 to prevent
✎ Memory
incorrect installation into the memory module socket.
Removing the Memory Module
Reverse the above procedure to install a memory module.
Maintenance and Service Guide
5–15
Removal and Replacement Procedures
5.8 Mini Card Module
Mini Card Module Spare Part Number Information
For use with computer models using Intel processors:
■ 802.11b/g WLAN module for use in the MOW 1 countries
listed below:
Antigua &
Barbuda
Argentina
Australia
Bahamas
Barbados
Brunei
Canada
Chile
Dominican
Republic
Guam
Guatemala
Hong Kong
Panama
India
Indonesia
Malaysia
Mexico
New Zealand
■ 802.11b/g WLAN module for use in the MOW 2 countries
listed below:
Aruba
Austria
Azerbaijan
Bahrain
Belgium
Bermuda
Bulgaria
Cayman Islands
Columbia
Croatia
Cyprus
The Czech
Republic
Denmark
5–16
Egypt
El Salvador
Estonia
Finland
France
Georgia
Germany
Greece
Hungary
Iceland
Ireland
Italy
Latvia
Lebanon
The Philippines
Poland
Portugal
Romania
Russia
Serbia and
Montenegro
Singapore
Slovakia
Liechtenstein
Lithuania
Luxembourg
Malta
Monaco
409407-001
Paraguay
Saudi Arabia
Taiwan
The United States
Vietnam
409407-002
The Netherlands
Norway
Oman
Slovenia
South Africa
Spain
Sri Lanka
Sweden
Switzerland
Turkey
The United
Kingdom
Uzbekistan
Maintenance and Service Guide
Removal and Replacement Procedures
Mini Card Module Spare Part Number Information (Continued)
■ 802.11a/b/g WLAN module for use in the ROW countries
listed below:
China
Ecuador
Haiti
Honduras
Pakistan
Peru
Qatar
South Korea
409497-001
Uruguay
Venezuela
For use with computer models using AMD processors:
■ 802.11a/b/g LJ WLAN module for use in
the United States and Canada
417377-001
■ 802.11a/b/g LJ WLAN module for use in the ROW
countries listed below:
417377-002
China
Ecuador
Haiti
Honduras
Pakistan
Peru
Qatar
South Korea
Uruguay
Venezuela
■ 802.11b/g HS WLAN module for use in the United States
and Canada
416376-001
■ 802.11b/g HS WLAN module for use in the ROW
countries listed below:
416376-002
China
Ecuador
Haiti
Honduras
Pakistan
Peru
Maintenance and Service Guide
Qatar
South Korea
Uruguay
Venezuela
5–17
Removal and Replacement Procedures
1. Prepare the computer for disassembly (Section 5.3).
2. Loosen the Phillips PM2.0×5.0 screw 1 that secures the
Mini Card compartment cover to the computer.
3. Lift the right edge of the Mini Card compartment cover 2,
and then swing it to the left.
4. Remove the Mini Card compartment cover.
Mini Card compartment cover is included in the Plastics
✎ The
Kit, spare part number 417073-001.
Removing the Mini Card Compartment Cover
5–18
Maintenance and Service Guide
Removal and Replacement Procedures
5. Make note of which wireless antenna cable is attached to
which antenna clip on the Mini Card module before
disconnecting the cables, then disconnect the cables 1 from
the module.
6. Remove the two Phillips PM2.0×4.0 screws 2 that secure the
Mini Card module to the computer. (The edge of the module
opposite the socket rises away from the computer).
7. Remove the module 3 by pulling it away from the socket at
an angle.
Card WLAN modules are designed with a notch 4 to
✎ Mini
prevent incorrect installation into the Mini Card module socket.
Removing a Mini Card Module
Reverse the above procedure to install a Mini Card module.
Maintenance and Service Guide
5–19
Removal and Replacement Procedures
5.9 Optical Drive
Optical Drive Spare Part Number Information
DVD/CD-RW Combo Drive
DVD±RW/R and CD-RW Double-Layer Combo Drive
DVD±RW/R and CD-RW Double-Layer Combo Drive with
LightScribe
417060-001
417061-001
417062-001
1. Prepare the computer for disassembly (Section 5.3).
2. Remove the Phillips PM2.5×7.0 screw 1 that secures the
optical drive to the computer.
3. Insert a thin tool, such as a paper clip, into the media tray
release hole 2. (The optical drive media tray releases from
the optical drive.)
4. Use the media tray frame to slide the optical drive 3 to
the left.
5. Remove the optical drive.
Removing the Optical Drive
5–20
Maintenance and Service Guide
Removal and Replacement Procedures
6. Position the optical drive with the optical drive bracket
toward you.
7. Remove the two Phillips PM2.0×3.0 screws 1 that secure the
optical drive bracket to the optical drive.
8. Remove the optical drive 2.
Removing the Optical Drive Bracket
Reverse the above procedure to reassemble and install the
optical drive.
Maintenance and Service Guide
5–21
Removal and Replacement Procedures
5.10 Keyboard
Keyboard Spare Part Number Information
For use only with computer models using Intel processors:
Belgium
Greece
Israel
Korea
Latin America
Portugal
417068-A41
417068-151
417068-BB1
417068-AD1
417068-1614
17068-131
Saudi Arabia
Switzerland
Taiwan
Thailand
Turkey
417068-171
417068-111
417068-AB1
417068-281
417068-141
Norway
Spain
Sweden/Finland
The United Kingdom
The United States
417068-091
417068-071
417068-101
417068-031
For use with all computer models:
Brazil
Denmark
France
French Canada
Germany
Internationally
Italy
417068-201
417068-081
417068-051
417068-121
417068-041
417068-B31
417068-061
417068-001
1. Prepare the computer for disassembly (Section 5.3).
5–22
Maintenance and Service Guide
Removal and Replacement Procedures
2. Remove the three Phillips PM2.5×7.0 screws that secure the
keyboard to the computer.
Removing the Keyboard Screws
Maintenance and Service Guide
5–23
Removal and Replacement Procedures
3. Turn the computer display-side up with the front panel
toward you.
4. Open the computer as far as possible.
5. Slide the keyboard 1 back to release the tabs on the front of
the keyboard from the top cover.
6. Lift the rear edge of the keyboard 2 and swing it forward
until it rests on the palm rest.
Releasing the Keyboard
5–24
Maintenance and Service Guide
Removal and Replacement Procedures
7. Release the zero insertion force (ZIF) connector 1 to which
the keyboard cable is connected and disconnect the keyboard
cable 2 from the system board.
Disconnecting the Keyboard Cable
8. Remove the keyboard.
Reverse the above procedure to install the keyboard.
Maintenance and Service Guide
5–25
Removal and Replacement Procedures
5.11 Switch Cover
Switch Cover Spare Part Number Information
For use with full-featured computer models
For use with defeatured computer models
417079-001
417080-001
1. Prepare the computer for disassembly (Section 5.3).
2. Remove the keyboard (Section 5.10).
3. Close the computer.
4. Turn the computer upside down with the front panel
toward you.
5. Remove the three Phillips PM2.5×9.0 screws 1 and the silver
Phillips PM2.5×5.0 screw 2 that secure the switch cover to
the computer.
Removing the Switch Cover Screws
5–26
Maintenance and Service Guide
Removal and Replacement Procedures
6. Turn the computer display-side up with the front toward you.
7. Open the computer as far as possible.
8. Disconnect the power button board cable 1 from the
system board.
9. Release the ZIF connector to which the LED board cable 2 is
connected and disconnect the cable from the system board.
Disconnecting the Switch Cover Cables
Maintenance and Service Guide
5–27
Removal and Replacement Procedures
10. Lift the front edge of the switch cover 1 to disengage it from
the computer.
11. Slide the switch cover 2 to the right to disengage it from the
computer.
12. Remove the switch cover 3.
Removing the Switch Cover
5–28
Maintenance and Service Guide
Removal and Replacement Procedures
power button board is available using spare part number
✎ The
417084-001.
13. If it is necessary to replace the power button board, remove
the two Phillips PM2.0×3.0 screws 1 that secure the board to
the switch cover, and then remove the power button board 2.
14. If it is necessary to replace the LED board cable, release the
ZIF connector 3 to which the cable is connected and
disconnect the cable 4 from the LED board.
Removing the Power Button Board and LED Board Cable
Reverse the above procedure to install the switch cover.
Maintenance and Service Guide
5–29
Removal and Replacement Procedures
5.12 Display Assembly
Display Assembly Spare Part Number Information
14.0-inch, WXGA display assembly (includes wireless antenna
transceivers and cables)
417048-001
1. Prepare the computer for disassembly (Section 5.3).
2. Disconnect the Mini Card WLAN antenna cables from the
Mini Card WLAN module (Section 5.8).
3. Remove the Phillips PM2.5×9.0 screw that secures the
display assembly to the computer.
Removing the Display Screw
5–30
Maintenance and Service Guide
Removal and Replacement Procedures
4. Turn the computer display-side up with the front toward you.
5. Open the display as far as possible.
6. Disconnect the following cables:
1 Display cable
2 Web camera cable
3 Microphone cable
7. Remove the wireless antenna cables 4 from the hole in the
system board.
Disconnecting the Display, Web Camera, and Microphone Cables
and Removing the Wireless Antenna Cables
Maintenance and Service Guide
5–31
Removal and Replacement Procedures
Ä
CAUTION: Support the display assembly when removing the following
screws. Failure to support the display assembly can result in damage to
the display assembly and other computer components.
8. Remove the two black Phillips PM2.5×5.0 screws 1 and the
two Phillips PM2.5×7.0 screws 2 that secure the display
assembly to the computer.
9. Remove the display assembly 3.
Removing the Display Assembly
5–32
Maintenance and Service Guide
Removal and Replacement Procedures
10. Remove the following:
1 Four rubber screw covers on the top edge of the
display bezel
2 Two rubber screw covers on the bottom edge of the
display bezel
3 Four Phillips PM2.5×5.0 screws on the top edge of the
display bezel
2 Two Phillips PM2.5×9.0 screws on the bottom edge of
the display bezel
display bezel rubber screw covers are included in the
✎ The
Display Plastics Kit, spare part number 417104-001.
Removing the Display Bezel Screws
Maintenance and Service Guide
5–33
Removal and Replacement Procedures
display bezel is included in the Display Plastics Kit, spare
✎ The
part numbers 430471-001 (for use with full-featured computer
models) and 417100-001 (for use with defeatured computer
models).
11. Flex the insides edges of the left and right sides 1 and the top
and bottom sides 2 of the display bezel until the bezel
disengages from the display enclosure.
12. Remove the display bezel 3.
Removing the Display Bezel
5–34
Maintenance and Service Guide
Removal and Replacement Procedures
Display Assembly Subcomponents
Spare Part Number Information
Web camera
417113-001
13. Remove the Phillips PM2.5×4.0 screw 1 that secures the
Web camera to the display enclosure.
14. Remove the display Web camera 2 from the
display enclosure.
15. Disconnect the camera cable 3 from the camera board.
Removing the Display Web Camera
Maintenance and Service Guide
5–35
Removal and Replacement Procedures
16. Turn the Web camera upside down.
17. Remove the two Phillips PM2.0×3.0 screws 1 that secure the
Web camera to the bracket.
18. Remove the Web camera 2 from the bracket.
Removing the Display Web Camera Bracket
5–36
Maintenance and Service Guide
Removal and Replacement Procedures
Display Assembly Subcomponents
Spare Part Number Information
Display inverter
417097-001
19. Remove the two Phillips PM2.5×5.0 screws 1 that secure the
inverter to the display enclosure.
20. Remove the inverter 2 from the display enclosure.
21. Disconnect the display cable 3 and the backlight cable 4
from the display inverter.
Removing the Display Inverter
Maintenance and Service Guide
5–37
Removal and Replacement Procedures
Display Assembly Subcomponents
Spare Part Number Information
Display Hinge Kit (includes left and right display hinges)
For use with full-featured computer models
For use with defeatured computer models
430473-001
417102-001
22. Remove the two Phillips PM2.5×7.0 screws 1 that secure
each hinge to the display panel.
23. Remove the display hinges 2.
24. Remove the display hinge covers 3 from the display hinges.
Removing the Display Hinges
5–38
Maintenance and Service Guide
Removal and Replacement Procedures
Display Assembly Subcomponents
Spare Part Number Information
Display panels
For use with full-featured computer models
For use with defeatured computer models
430457-001
430458-001
25. Remove the display panel from the display enclosure.
Removing the Display Panel
Maintenance and Service Guide
5–39
Removal and Replacement Procedures
Display Assembly Subcomponents
Spare Part Number Information
Wireless antenna transceivers and cables
417106-001
26. If it is necessary to replace the wireless transceivers and
cables, remove the two Phillips PM2.5×4.0 screws 1 that
secure the left and right transceivers to the display enclosure.
27. Remove the wireless antenna cables from the clips 2 built in
to the left and right sides of the display enclosure.
28. Detach the wireless antenna transceivers 3 from the
display enclosure.
29. Remove the wireless antenna cables 4.
Removing the Wireless Antenna Transceivers and Cables
5–40
Maintenance and Service Guide
Removal and Replacement Procedures
microphones are included in the Display Cable Kit, spare
✎ The
part number 410099-001.
30. If it is necessary to replace the microphones and cables,
release the retention tabs 1 built in to the display enclosure
lining that secure the microphones and cables to the
display enclosure.
31. Remove the microphones from the clips 2 in the
display enclosure.
32. Remove the microphone cables 3 from the display enclosure.
Removing the Microphones
Maintenance and Service Guide
5–41
Removal and Replacement Procedures
Web camera cable is included in the Display Cable Kit,
✎ The
spare part number 410099-001.
33. If it is necessary to replace the Web camera cable, release the
retention tabs 1 built in to the display enclosure lining that
secure the Web camera cable to the display enclosure.
34. Remove the Web camera cable 2 from the display enclosure.
Removing the Web Camera Cable
Reverse the above procedure to reassemble and install the
display assembly
5–42
Maintenance and Service Guide
Removal and Replacement Procedures
5.13 Top Cover
Top Cover Spare Part Number Information
For use with full-featured computer models
For use with defeatured computer models
430467-001
417090-001
1. Prepare the computer for disassembly (Section 5.3) and
remove the following components:
❏ Hard drive (Section 5.4)
❏ Mini Card compartment cover (Section 5.8)
❏ Optical drive (Section 5.9)
❏ Keyboard (Section 5.10)
❏ Switch cover (Section 5.11)
❏ Display assembly (Section 5.12)
Maintenance and Service Guide
5–43
Removal and Replacement Procedures
2. Remove the six Phillips PM2.5×9.0 screws 1 and the
Phillips PM2.5×7.0 screw 2 that secure the top cover to
the computer.
Removing the Top Cover Screws, Part 1
5–44
Maintenance and Service Guide
Removal and Replacement Procedures
3. Remove the two Phillips PM2.0×3.0 screws 1 and the
four Phillips PM2.0×4.0 screws 2 that secure the top cover
to the computer.
Removing the Top Cover Screws, Part 2
Maintenance and Service Guide
5–45
Removal and Replacement Procedures
4. Turn the computer right-side up with the front toward you.
5. Release the ZIF connector 1 to which the TouchPad cable is
connected and disconnect the cable 2 from the system board.
Disconnecting the TouchPad Cable
5–46
Maintenance and Service Guide
Removal and Replacement Procedures
6. Remove the four Phillips PM2.5×4.0 screws 1 and the
Phillips PM2.5×9.0 screw 2 that secure the top cover to
the computer.
Removing the Top Cover Screws, Part 3
7. Lift up the front edge of the top cover and remove it.
Removing the Top Cover
Reverse the above procedure to install the top cover.
Maintenance and Service Guide
5–47
Removal and Replacement Procedures
5.14 TouchPad
TouchPad Spare Part Number Information
TouchPad (includes TouchPad bracket and Touchpad cable)
430464-010
TouchPad cable
417082-001
1. Prepare the computer for disassembly (Section 5.3) and
remove the following components:
❏ Hard drive (Section 5.4)
❏ Mini Card compartment cover (Section 5.8)
❏ Optical drive (Section 5.9)
❏ Keyboard (Section 5.10)
❏ Switch cover (Section 5.11)
❏ Display assembly (Section 5.12)
❏ Top cover (Section 5.13
5–48
Maintenance and Service Guide
Removal and Replacement Procedures
2. Release the ZIF connector 1 to which the TouchPad cable is
connected and disconnect the cable 2 from the
TouchPad board.
Removing the TouchPad Cable
Maintenance and Service Guide
5–49
Removal and Replacement Procedures
3. Remove the five Phillips PM2.0×3.0 screws 1 that secure the
TouchPad bracket to the top cover.
4. Remove the TouchPad Bracket 2 and TouchPad board 3
from the top cover.
removing the TouchPad bracket and TouchPad board,
✎ When
make note of the location of the TouchPad button actuators 4.
Removing the TouchPad
5–50
Maintenance and Service Guide
Removal and Replacement Procedures
5. Remove the two Phillips PM2.0×2.0 screws 1 that secure the
TouchPad board to the TouchPad bracket.
6. Remove the TouchPad board 2 from the TouchPad bracket.
Removing the TouchPad Board
Reverse the above procedure to install the TouchPad.
Maintenance and Service Guide
5–51
Removal and Replacement Procedures
5.15 Wireless Switch Board
Wireless Switch Board Spare Part Number Information
Wireless switch board (includes wireless switch board cable)
417092-001
1. Prepare the computer for disassembly (Section 5.3) and
remove the following components:
❏ Hard drive (Section 5.4)
❏ Mini Card compartment cover (Section 5.8)
❏ Optical drive (Section 5.9)
❏ Keyboard (Section 5.10)
❏ Switch cover (Section 5.11)
❏ Display assembly (Section 5.12)
❏ Top cover (Section 5.13)
5–52
Maintenance and Service Guide
Removal and Replacement Procedures
2. Disconnect the wireless switch board cable 1 from the
system board.
3. Remove the two Phillips PM2.0×3.0 screws 2 that secure the
wireless switch board to the computer.
4. Remove the wireless switch board 3.
Removing the Wireless Switch Board
Reverse the above procedure to install the wireless switch board.
Maintenance and Service Guide
5–53
Removal and Replacement Procedures
5.16 Modem Module
Modem Module Spare Part Number Information
For use only with computer models using Intel processors
For use only with computer models using AMD processors
417083-001
431852-001
1. Prepare the computer for disassembly (Section 5.3) and
remove the following components:
❏ Hard drive (Section 5.4)
❏ Mini Card compartment cover (Section 5.8)
❏ Optical drive (Section 5.9)
❏ Keyboard (Section 5.10)
❏ Switch cover (Section 5.11)
❏ Display assembly (Section 5.12)
❏ Top cover (Section 5.13)
5–54
Maintenance and Service Guide
Removal and Replacement Procedures
2. Disconnect the modem module cable 1 from the
modem module.
3. Remove the two Phillips PM2.0×4.0 screws 2 that secure the
modem module to the system board.
4. Lift up on the front of the modem module 3 to disconnect it
from the system board.
5. Remove the Modem module.
Removing the Modem Module
Reverse the above procedure to install the modem module.
Maintenance and Service Guide
5–55
Removal and Replacement Procedures
5.17 Audio/Infrared Board
Audio/Infrared Board Spare Part Number Information
Audio/infrared board (includes audio/infrared board cable)
417086-001
1. Prepare the computer for disassembly (Section 5.3) and
remove the following components:
❏ Hard drive (Section 5.4)
❏ Mini Card compartment cover (Section 5.8)
❏ Optical drive (Section 5.9)
❏ Keyboard (Section 5.10)
❏ Switch cover (Section 5.11)
❏ Display assembly (Section 5.12)
❏ Top cover (Section 5.13)
5–56
Maintenance and Service Guide
Removal and Replacement Procedures
2. Release the ZIF connector to which the audio/infrared board
cable is connected and disconnect the cable 1 from the
system board.
3. Remove the two Phillips PM2.5×5.0 screws 2 that secure the
audio/infrared board to the computer.
4. Lift the rear edge of the audio/infrared board 3 and swing it
forward until the audio connectors disengage from the
base enclosure.
5. Remove the audio/infrared board 4.
Removing the Audio/Infrared Board
Reverse the above procedure to install the audio/infrared board.
Maintenance and Service Guide
5–57
Removal and Replacement Procedures
5.18 Bluetooth Module
Bluetooth Module Spare Part Number Information
Bluetooth module (includes Bluetooth module cable)
397923-001
1. Prepare the computer for disassembly (Section 5.3) and
remove the following components:
❏ Hard drive (Section 5.4)
❏ Mini Card compartment cover (Section 5.8)
❏ Optical drive (Section 5.9)
❏ Keyboard (Section 5.10)
❏ Switch cover (Section 5.11)
❏ Display assembly (Section 5.12)
❏ Top cover (Section 5.13)
❏ Audio/infrared board (Section 5.17)
5–58
Maintenance and Service Guide
Removal and Replacement Procedures
2. Disconnect the Bluetooth module cable 1 from the
system board.
3. Remove the two Phillips PM2.0×3.0 screws 1 that secure the
Bluetooth module to the computer.
4. Remove the Bluetooth module 3.
Removing the Bluetooth Module
Reverse the above procedure to install the Bluetooth module.
Maintenance and Service Guide
5–59
Removal and Replacement Procedures
5.19 USB Board
USB Board Spare Part Number Information
USB board
417085-001
1. Prepare the computer for disassembly (Section 5.3) and
remove the following components:
❏ Hard drive (Section 5.4)
❏ Mini Card compartment cover (Section 5.8)
❏ Optical drive (Section 5.9)
❏ Keyboard (Section 5.10)
❏ Switch cover (Section 5.11)
❏ Display assembly (Section 5.12)
❏ Top cover (Section 5.13)
5–60
Maintenance and Service Guide
Removal and Replacement Procedures
2. Disconnect the USB board cable 1 from the system board.
3. Remove the Phillips PM2.5×4.0 screw 2 that secures the
USB board to the computer.
4. Lift the USB board 3 straight up to remove it from the
computer.
5. Remove the num lock light 4 from the clip in the base
enclosure
Removing the USB Board
Reverse the above procedure to install the USB board.
Maintenance and Service Guide
5–61
Removal and Replacement Procedures
5.20 Speaker Assembly
Speaker Assembly Spare Part Number Information
Speaker assembly
417089-001
1. Prepare the computer for disassembly (Section 5.3) and
remove the following components:
❏ Hard drive (Section 5.4)
❏ Mini Card compartment cover (Section 5.8)
❏ Optical drive (Section 5.9)
❏ Keyboard (Section 5.10)
❏ Switch cover (Section 5.11)
❏ Display assembly (Section 5.12)
❏ Top cover (Section 5.13)
5–62
Maintenance and Service Guide
Removal and Replacement Procedures
2. Disconnect the speaker cable 1 from the system board.
3. Remove the three Phillips PM2.5×4.0 screws 2 that secure
the speakers to the computer.
4. Lift the speakers 3 straight up to remove them from the
computer.
Removing the Speaker Assembly
Reverse the above procedure to install the speaker assembly.
Maintenance and Service Guide
5–63
Removal and Replacement Procedures
5.21 Display Lid Switch Module
Display Lid Switch Module Spare Part Number Information
Display lid switch module
417087-001
1. Prepare the computer for disassembly (Section 5.3) and
remove the following components:
❏ Hard drive (Section 5.4)
❏ Mini Card compartment cover (Section 5.8)
❏ Optical drive (Section 5.9)
❏ Keyboard (Section 5.10)
❏ Switch cover (Section 5.11)
❏ Display assembly (Section 5.12)
❏ Top cover (Section 5.13)
5–64
Maintenance and Service Guide
Removal and Replacement Procedures
2. Turn the computer upside down with the front toward you.
3. Remove the two silver Phillips PM2.5×5.0 screws that secure
the top cover rear strip to the computer.
Removing the Base Enclosure Trim Screws
Maintenance and Service Guide
5–65
Removal and Replacement Procedures
4. Turn the computer right-side up with the front toward you.
5. Remove the top cover rear strip from the computer.
top cover rear strips are available using spare part numbers
✎ The
430466-001 (for use with full-featured computer models) and
417088-001 (for use with defeatured computer models).
Removing the Top Cover Rear Strip
5–66
Maintenance and Service Guide
Removal and Replacement Procedures
6. Disconnect the display lid switch module cable 1 from the
system board.
7. Remove the Phillips PM2.0×3.0 screw 2 that secures the
display lid switch module to the computer.
8. Remove the display lid switch module 3 from the
system board.
Removing the Display Lid Switch Module
Reverse the above procedure to install the display lid switch
module.
Maintenance and Service Guide
5–67
Removal and Replacement Procedures
5.22 System Board
System Board Spare Part Number Information
For use only with computer models using Intel processors:
■ PM/G72M-V for use with full-featured computer models
■ GM for use with full-featured computer models
■ GMZ for use with defeatured computer models
417035-001
417036-001
417037-001
For use only with computer models using AMD processors:
■ For use with full-featured computer models
■ For use with defeatured computer models
431483-001
431844-001
replacing the system board, ensure that the following
✎ When
components are removed from the defective system board and
installed on the replacement system board:
■ RTC battery (Section 5.5)
■ Memory modules (Section 5.7)
■ Mini Card module (Section 5.8)
■ Modem module (Section 5.16)
■ ExpressCard assembly (Section 5.24)
■ Fan/heat sink assembly (Section 5.25)
■ Processor (Section 5.26)
1. Prepare the computer for disassembly (Section 5.3) and
remove the following components:
❏ Hard drive (Section 5.4)
❏ Optical drive (Section 5.9)
❏ Keyboard (Section 5.10)
❏ Switch cover (Section 5.11)
5–68
Maintenance and Service Guide
Removal and Replacement Procedures
❏ Display assembly (Section 5.12)
❏ Top cover (Section 5.13)
2. Turn the top cover right-side up with the front toward you.
3. Disconnect the power connector cable 1 from the
system board.
4. Remove the two Phillips PM2.5×5.0 screws 2 that secure
the system board to the top cover.
Removing the System Board Screws
Maintenance and Service Guide
5–69
Removal and Replacement Procedures
5. Use the optical drive connector 1 to lift the right side of the
system board until it rests at an angle.
6. Slide the system board 2 to the right until the connectors on
the left side of the system board disengage from the
base enclosure.
7. Remove the system board 3.
Removing the System Board
5–70
Maintenance and Service Guide
Removal and Replacement Procedures
5.23 Power Connector Cable
Power Connector Cable Spare Part Number Information
For use with UMA system boards
For use only with computer models using Intel processors
430462-001
430461-001
1. Prepare the computer for disassembly (Section 5.3) and
remove the following components:
❏ Hard drive (Section 5.4)
❏ Optical drive (Section 5.9)
❏ Keyboard (Section 5.10)
❏ Switch cover (Section 5.11)
❏ Display assembly (Section 5.12)
❏ Top cover (Section 5.13)
❏ System board (Section 5.22)
Maintenance and Service Guide
5–71
Removal and Replacement Procedures
2. Remove the Phillips PM2.5×5.0 screw 1 that secures the
connector frame to the base enclosure.
3. Remove the connector frame 2 to the base enclosure.
4. Remove the power connector 3 from the connector frame.
5. Remove the modem connector 4 from the connector frame.
Removing the Power Connector Cable and Modem Cable
Reverse the above procedure to install the power connector cable
and modem cable.
5–72
Maintenance and Service Guide
Removal and Replacement Procedures
5.24 ExpressCard Assembly
ExpressCard Assembly Spare Part Number Information
ExpressCard assembly
417112-001
1. Prepare the computer for disassembly (Section 5.3) and
remove the following components:
❏ Hard drive (Section 5.4)
❏ Optical drive (Section 5.9)
❏ Keyboard (Section 5.10)
❏ Switch cover (Section 5.11)
❏ Display assembly (Section 5.12)
❏ Top cover (Section 5.13)
❏ System board (Section 5.22)
2. Turn the system board upside down with the front
toward you.
Maintenance and Service Guide
5–73
Removal and Replacement Procedures
3. Lift the insulation material 1 from the system board to
expose the ExpressCard assembly rear screws.
4. Remove the two Phillips PM2.0×4.0 screws 2 and the two
Phillips PM2.0×8.0 screws 3 that secure the ExpressCard
assembly to the system board.
Removing the Fan/Heat Sink Assembly
5–74
Maintenance and Service Guide
Removal and Replacement Procedures
5. Turn the system board right-side up with the front
toward you.
6. Remove the ExpressCard assembly from the system board.
Removing the ExpressCard Assembly
Reverse the above procedure to install the ExpressCard assembly.
Maintenance and Service Guide
5–75
Removal and Replacement Procedures
5.25 Fan/Heat Sink Assembly
Fan/Heat Sink Assembly Spare Part Number Information
For use with computer models using Intel processors:
■ For use on UMA system boards
■ For use on discrete system boards
430463-001
417081-001
For use with computer models using AMD processors
431851-001
1. Prepare the computer for disassembly (Section 5.3) and
remove the following components:
❏ Hard drive (Section 5.4)
❏ Optical drive (Section 5.9)
❏ Keyboard (Section 5.10)
❏ Switch cover (Section 5.11)
❏ Display assembly (Section 5.12)
❏ Top cover (Section 5.13)
❏ System board (Section 5.22)
2. Turn the computer upside down with the front toward you.
5–76
Maintenance and Service Guide
Removal and Replacement Procedures
3. Disconnect the fan cable from the system board.
Disconnecting the Fan Cable
Maintenance and Service Guide
5–77
Removal and Replacement Procedures
4 and 5 apply only to computer models using
✎ Steps
Intel processors.
4. Loosen the four Phillips PM2.0×13.0 screws 1 and the
Phillips PM2.0×9.0 screw 2 that secure the fan/heat sink
assembly to the system board.
5. Remove the fan/heat sink assembly 3 from the system board.
Removing Fan/Heat Sink Assembly
5–78
Maintenance and Service Guide
Removal and Replacement Procedures
6 and 7 apply only to computer models using
✎ Steps
AMD processors.
6. Loosen the Phillips PM2.0×9.0 screw 1 and the four Phillips
PM2.0×13.0 screws 2 that secure the fan/heat sink assembly
to the system board.
7. Remove the fan/heat sink assembly 3 from the system board.
Removing Fan/Heat Sink Assembly
Maintenance and Service Guide
5–79
Removal and Replacement Procedures
following note applies only to computer models using
✎ The
Intel processors:
The thermal pads should be thoroughly cleaned from the surfaces
of the fan/heat sink assembly 1 and 3, video memory chip 2,
and processor 4 each time the fan/heat sink assembly is removed.
Thermal pads should be installed on all surfaces before the
fan/heat sink assembly is reinstalled. Thermal pads are included
with all fan/heat sink assembly, system board, and processor
spare part kits.
Replacing the Thernal Pads
5–80
Maintenance and Service Guide
Removal and Replacement Procedures
following note applies only to computer models using
✎ The
AMD processors:
The thermal pads should be thoroughly cleaned from the surfaces
of the fan/heat sink assembly 1 and 2, video memory chip 3,
and processor 4 each time the fan/heat sink assembly is removed.
Thermal pads should be installed on all surfaces before the
fan/heat sink assembly is reinstalled. Thermal pads are included
with all fan/heat sink assembly, system board, and processor
spare part kits.
Replacing the Thernal Pads
Maintenance and Service Guide
5–81
Removal and Replacement Procedures
following note applies only to computer models using
✎ The
Intel processors:
The fan/heat sink assembly mounting bracket should be replaced
as shown in the following illustration when installing the fan/heat
sink assembly.
The fan/heat sink assembly mounting bracket is available using
spare part number 417114-001.
Removing the Fan/Heat Sink Assembly Mounting Bracket
5–82
Maintenance and Service Guide
Removal and Replacement Procedures
following note applies only to computer models using
✎ The
AMD processors:
The fan/heat sink assembly mounting bracket should be replaced
as shown in the following illustration when installing the fan/heat
sink assembly.
The fan/heat sink assembly mounting bracket is available using
spare part number 417114-001.
Removing the Fan/Heat Sink Assembly Mounting Bracket
Reverse the above procedure to install the fan/heat sink assembly.
Maintenance and Service Guide
5–83
Removal and Replacement Procedures
5.26 Processor
Processor Spare Part Number Information
For use with computer models using Intel processors:
■
■
■
■
■
■
Intel Core Duo T2600 (2.16-GHz)
Intel Core Duo T2500 (2.00-GHz)
Intel Core Duo T2400 (1.83-GHz)
Intel Core Duo T2250 (1.73-GHz)
Intel Core Duo T2300 (1.66-GHz)
Intel Core Duo T2050 (1.60-GHz)
417044-001
417043-001
417042-001
430455-001
417041-001
430454-001
■ Intel Core Solo T1350 (1.80-GHz)
430456-001
For use with computer models using AMD processors:
■ AMD Turion ML-52 1.60-Ghz
■ AMD Turion ML-50 1.60-GHz
431846-001
431845-001
■ Mobile AMD Sempron 3400+ (1.80-GHz)
■ Mobile AMD Sempron 3200+ (1.60-GHz)
431849-001
431484-001
1. Prepare the computer for disassembly (Section 5.3) and
remove the following components:
❏ Hard drive (Section 5.4)
❏ Optical drive (Section 5.9)
❏ Keyboard (Section 5.10)
❏ Switch cover (Section 5.11)
❏ Display assembly (Section 5.12)
❏ Top cover (Section 5.13)
❏ System board (Section 5.22)
5–84
Maintenance and Service Guide
Removal and Replacement Procedures
2 and 3 apply only to computer models using
✎ Steps
Intel processors.
2. Turn the processor locking screw 1 one-half turn
counterclockwise until you feel a click.
3. Lift the processor 2 straight up and remove it.
The gold triangle 4 on the processor should be aligned with
✎ the
triangle icon 3 embossed on the processor socket when
you install the processor.
Removing the Processor
Maintenance and Service Guide
5–85
Removal and Replacement Procedures
4 and 5 apply only to computer models using
✎ Steps
AMD processors.
4. Turn the processor locking screw 1 one-half turn
counterclockwise until you feel a click.
5. Lift the processor 2 straight up and remove it.
The gold triangle 3 on the processor should be aligned with
✎ the
triangle icon 4 embossed on the processor socket when
you install the processor.
Removing the Processor
Reverse the above procedure to install a processor.
5–86
Maintenance and Service Guide
6
Specifications
This chapter provides physical and performance specifications.
Table 6-1
Computer
Dimensions
Length
Width
Height (varies from front to back)
Weight
With discrete system board
With UMA system board
33.4 cm
23.7 cm
2.6 to 3.9 cm
13.2 in
9.33 in
1.02 to 1.54 in
2.48 kg
2.39 kg
5.47 lbs
5.27 lbs
Stand-alone power requirements
Operating voltage
Operating current
18.5 V dc to 19.0 V dc
3.5 A or 4.74 A
Temperature
Operating*
Nonoperating
5°C to 35°C
-20°C to 60°C
41°F to 95°F
-4°F to 140°F
Relative humidity (noncondensing)
Operating
Nonoperating
Maintenance and Service Guide
10% to 90%
5% to 95%, 38.7°C (101.6°F) maximum
wet bulb temperature
6–1
Specifications
Table 6-1
Computer (Continued)
Maximum altitude (unpressurized)
Operating (14.7 to 10.1 psia)
Nonoperating (14.7 to 4.4 psia)
-15 m to 3,048 m
-15 m to 12,192 m
-50 ft to 10,000 ft
-50 ft to 40,000 ft
Shock
Operating
Nonoperating
125 g, 2 ms, half-sine
200 g, 2 ms, half-sine
Random Vibration
Operating
Nonoperating
0.75 g zero-to-peak, 10 Hz to 500 Hz,
0.25 oct/min sweep rate
1.50 g zero-to-peak, 10 Hz to 500 Hz,
0.5 oct/min sweep rate
*Applicable product safety standards specify thermal limits for plastic surfaces.
The computer operates well within this range of temperatures.
6–2
Maintenance and Service Guide
Specifications
Table 6-2
14.0-inch, WXGA, SVA Display
Dimensions
Height
Width
Diagonal
27.94 cm
20.83 cm
35.56 cm
Number of colors
Up to 16.8 million
Contrast ratio
250:1
Brightness
180 nits typical
11.0 in
8.2 in
14.0 in
Pixel resolution
Pitch
Format
Configuration
0.279 × 0.279 mm
1280 × 768
RGB vertical stripe
Backlight
Edge lit
Character display
80 × 25
Total power consumption
4W
Viewing angle
+/-40° horizontal, +20/-40° vertical
typical
Maintenance and Service Guide
6–3
Specifications
Table 6-3
Hard Drives
120-GB*
100-GB*
Dimensions
Height
Width
Weight
Interface type
9.5 mm
70 mm
99 g
9.5 mm
70 mm
99 g
ATA-5
ATA-5
100 MB/sec
ATA security
100 MB/sec
ATA security
3 ms
13 ms
24 ms
3 ms
13 ms
24 ms
234,433,260
195,363,650
Transfer rate
Synchronous (maximum)
Security
Seek times (typical read, including setting)
Single track
Average
Maximum
Logical blocks†
Disk rotational speed
Operating temperature
5400 rpm
5°C to 55°C (41°F to 131°F)
restrictions and exclusions apply. Consult Customer Care
✎ forCertain
details.
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Accessible
capacity is less.
†Actual drive specifications may differ slightly.
6–4
Maintenance and Service Guide
Specifications
Table 6-3
Hard Drives (Continued)
80-GB*
60-GB*
40-GB *
Dimensions
Height
Width
Weight
Interface type
9.5 mm
70 mm
102 g
9.5 mm
70 mm
99 g
9.5 mm
70 mm
99 g
ATA-5
ATA-5
ATA-5
100 MB/sec
ATA security
100 MB/sec
ATA security
100 MB/sec
ATA security
3 ms
13 ms
24 ms
3 ms
13 ms
24 ms
3 ms
13 ms
24 ms
156,301,488
117,210,240
78,140,160
Transfer rate
Synchronous
(maximum)
Security
Seek times (typical read, including setting)
Single track
Average
Maximum
Logical blocks†
Disk rotational speed
Operating temperature
5400 rpm
5°C to 55°C (41°F to 131°F)
restrictions and exclusions apply. Consult Customer Care
✎ forCertain
details.
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Accessible
capacity is less.
†Actual drive specifications may differ slightly.
Maintenance and Service Guide
6–5
Specifications
Table 6-4
DVD/CD-RW Combo Drive
Applicable disc
Read:
Write:
DVD-R, DVD-RW,
CD-R and CD-RW
DVD-ROM (DVD-5,
DVD-9, DVD-10,
DVD-18),
CD-ROM (Mode 1 and 2)
CD Digital Audio
CD-XA ready (Mode 2,
Form 1 and 2)
CD-I ready (Mode 2,
Form 1 and 2)
CD-R, CD-RW
Photo CD (single and
multisession)
CD-Bridge
Center hole diameter
1.5 cm (0.59 in)
Disc diameter
Standard disc
Mini disc
6–6
12 cm (4.72 in)
8 cm (3.15 in)
Maintenance and Service Guide
Specifications
Table 6-4
DVD/CD-RW Combo Drive (Continued)
Disc thickness
1.2 mm (0.047 in)
Track pitch
0.74 µm
Access time
CD media
DVD media
< 110 ms
< 210 ms
< 130 ms
< 225 ms
Random
Full stroke
Audio output level
Line-out, 0.7 V rms
Cache buffer
2 MB
Data transfer rate
CD-R (24X)
CD-RW (10X)
CD-ROM (24X)
DVD (8X)
Multiword DMA mode 2
3600 KB/s (150 KB/s at 1X CD rate)
1500 KB/s (150 KB/s at 1X CD rate)
3600 KB/s (150 KB/s at 1X CD rate)
10,800 KB/s (1352 KB/s at 1X DVD rate)
16.6 MB/s
Startup time
< 15 seconds
Stop time
< 6 seconds
Maintenance and Service Guide
6–7
Specifications
Table 6-5
DVD±RW/R and CD-RW Double-Layer
Combo Drive
Applicable disc
Read:
Write:
DVD-R, DVD-RW,
CD-R and CD-RW
DVD-ROM (DVD-5,
DVD-R and DVD-RW
DVD-9, DVD-10,
DVD-18),
CD-ROM (Mode 1 and 2)
CD Digital Audio
CD-XA ready (Mode 2,
Form 1 and 2)
CD-I ready (Mode 2,
Form 1 and 2)
CD-R, CD-RW
Photo CD (single and
multisession)
CD-Bridge
Center hole diameter
1.5 cm (0.59 in)
Disc diameter
Standard disc
Mini disc
6–8
12 cm (4.72 in)
8 cm (3.15 in)
Maintenance and Service Guide
Specifications
Table 6-5
DVD±RW/R and CD-RW Double-Layer
Combo Drive (Continued)
Disc thickness
1.2 mm (0.047 in)
Track pitch
0.74 µm
Access time
CD
DVD
< 175 ms
< 285 ms
< 230 ms
< 335 ms
Random
Full stroke
Audio output level
Audio-out, 0.7 Vrms
Cache buffer
2 MB
Data transfer rate
CD-R (16X)
CD-RW (8X)
CD-ROM (24X)
DVD (8X)
DVD-R (4X)
DVD-RW (2X)
Multiword DMA mode 2
2,400 KB/s (150 KB/s at 1X CD rate)
1,200 KB/s (150 KB/s at 1X CD rate)
3,600 KB/s (150 KB/s at 1X CD rate)
10,800 KB/s (1,352 KB/s at 1X DVD rate)
5,400 KB/s (1,352 KB/s at 1X DVD rate)
2,700 KB/s (1,352 KB/s at 1X DVD rate)
16.6 MB/s
Startup time
< 15 seconds
Stop time
< 6 seconds
Maintenance and Service Guide
6–9
Specifications
Table 6-6
System DMA
Hardware DMA
System Function
DMA0
Not applicable
DMA1
Not applicable
DMA2
Not applicable
DMA3
Not applicable
DMA4
Direct memory access controller
DMA5
Available for ExpressCard
DMA6
Not assigned
DMA7
Not assigned
6–10
Maintenance and Service Guide
Specifications
Table 6-7
System Interrupts
Hardware IRQ
System Function
IRQ0
System timer
IRQ1
Quick Launch buttons
IRQ2
Cascaded
IRQ3
USB2 Enhanced Host Controller—24CD
IRQ4
COM1
IRQ5*
Conexant AC—Link Audio
SMBus Controller—24C3
Data Fax Modem with SmartCP
IRQ6
Diskette drive
IRQ7*
Parallel port
IRQ8
System CMOS/real-time clock
IRQ9*
Microsoft ACPI-compliant system
IRQ10*
USB UHCI controller—24C2
GM/GME Graphic Controller
Realtek RTL8139 Family PCI fast Ethernet Controller
IRQ11
USB EHCI controller—24CD
USB UHCI controller—24C4
USB UHCI controller—24C7
Pro/Wireless 2200BG
TI OHCI 1394 host controller
TI PCI1410 CardBus controller
*Default configuration
✎ ExpressCard may assert IRQ3, IRQ4, IRQ5, IRQ7, or IRQ20.
Maintenance and Service Guide
6–11
Specifications
Table 6-7
System Interrupts (Continued)
Hardware IRQ
System Function
IRQ12
Synaptics PS/2 port pointing device
IRQ13
Numeric data processor
IRQ14
Primary IDE channel
IRQ15
Secondary IDE channel
IRQ17
Conexant AC -Link Audio
IRQ17
Soft V90 Data Fax Modem with SmartCP
IRQ17
ATi Mobility Radeon Xpress 200 Series
IRQ19
Standard Enhanced PCI to USB Host Controller
IRQ19
Standard OpenHCD USB Host Controller
IRQ19
Standard OpenHCD USB Host Controller
IRQ20
TI 6411 PCIxx21/x515 Cardbus Controller
IRQ20
TI OHCI Compliant IEEE 1394 Host Controller
IRQ21
TI Integrated PCIxx21 FlashMedia Controller
IRQ21
Broadcom 802.11b/g WLAN
IRQ21
Microsoft ACPI-compliant system
IRQ22
Realtek RTL8100CL Family PCI fast Ethernet
Controller
IRQ23
SDA Standard Compliant SD Host Controller
*Default configuration
✎ ExpressCard may assert IRQ3, IRQ4, IRQ5, IRQ7, or IRQ20.
6–12
Maintenance and Service Guide
Specifications
Table 6-8
System I/O Addresses
I/O Address (hex)
System Function (shipping configuration)
0x00000000-0x00000CF7
PCI bus
0x00000000-0x00000CF7
Direct memory access controller
0x00000020-0x00000021
Programmable interrupt controller
0x0000002E-0x0000002F
System board resources
0x00000040-0x00000043
System timer
0x00000060-0x00000060
Quick Launch Buttons
0x00000061-0x00000061
System speaker
0x00000062-0x00000062
Microsoft ACPI-Compliant Embedded
Controller
0x00000064-0x00000064
Quick Launch Buttons
0x00000066-0x00000066
Microsoft ACPI-Compliant Embedded
Controller
0x00000070-0x00000071
System CMOS/real time clock
0x00000072-0x00000073
System board resources
0x00000080-0x0000008F
Direct memory access controller
0x00000092-0x00000092
System board resources
0x000000A0-0x000000A1
Programmable interrupt controller
0x000000B0-0x000000B1
System board resources
0x000000C0-0x000000DF
Direct memory access controller
0x000000F0-0x000000FE
Numeric data processor
0x00000170-0x00000177
Secondary IDE Channel
Maintenance and Service Guide
6–13
Specifications
Table 6-8
System I/O Addresses (Continued)
I/O Address (hex)
System Function (shipping configuration)
0x000001F0-0x000001F7
Primary IDE Channel
0x00000220-0x0000022F
System board resources
0x00000274-0x00000277
ISAPNP Read Data Port
0x00000279-0x00000279
ISAPNP Read Data Port
0x00000280-0x00000293
System board resources
0x00000376-0x00000376
Secondary IDE Channel
0x000003B0-0x000003BB
PCI standard PCI-to-PCI bridge
0x000003B0-0x000003BB
ATI MOBILITY RADEON Xpress 200 Series
0x000003C0-0x000003DF
PCI standard PCI-to-PCI bridge
0x000003C0-0x000003DF
ATI MOBILITY RADEON Xpress 200 Series
0x000003F6-0x000003F6
Primary IDE Channel
0x0000040B-0x0000040B
System board resources
0x000004D0-0x000004D1
System board resources
0x000004D6-0x000004D6
System board resources
0x00000530-0x00000537
System board resources
0x00000870-0x0000087F
System board resources
0x00000A79-0x00000A79
ISAPNP Read Data Port
0x00000C00-0x00000C01
System board resources
0x00000C14-0x00000C14
System board resources
0x00000C50-0x00000C52
System board resources
0x00000C6C-0x00000C6C
System board resources
6–14
Maintenance and Service Guide
Specifications
Table 6-8
System I/O Addresses (Continued)
I/O Address (hex)
System Function (shipping configuration)
0x00000C6F-0x00000C6F
System board resources
0x00000CD4-0x00000CD5
System board resources
0x00000CD6-0x00000CD7
System board resources
0x00000CD8-0x00000CDF
System board resources
0x00000D00-0x0000FFFF
PCI bus
0x00000F40-0x00000F47
System board resources
0x00001080-0x00001080
System board resources
0x00008000-0x0000805F
System board resources
0x00008100-0x000081FF
System board resources
0x00008400-0x0000840F
ATI SMBus
0x00008410-0x0000841F
Standard Dual Channel PCI IDE Controller
0x00009000-0x00009FFF
PCI standard PCI-to-PCI bridge
0x00009000-0x00009FFF
ATI MOBILITY RADEON Xpress 200 Series
0x0000A000-0x0000A0FF
Realtek RTL8139/810x Family Fast Ethernet
NIC
0x0000F000-0x0000FFFF
PCI standard PCI-to-PCI bridge
0x0000FD00-0x0000FDFF
Texas Instruments PCIxx21/x515 Cardbus
Controller
0x0000FE00-0x0000FEFF
Texas Instruments PCIxx21/x515 Cardbus
Controller
Maintenance and Service Guide
6–15
Specifications
Table 6-9
System Memory Map
Memory Map Address (hex)
System Function (shipping configuration)
0xD4100000-0xD41FFFFF
PCI standard PCI-to-PCI bridge
0xD4100000-0xD41FFFFF
ATI MOBILITY RADEON Xpress 200 Series
0xD8000000-0xDBFFFFFF
PCI standard PCI-to-PCI bridge
0xD8000000-0xDBFFFFFF
ATI MOBILITY RADEON Xpress 200 Series
0xFAC00000-0xFEBFFFFF
PCI standard PCI-to-PCI bridge
0xF6C00000-0xFABFFFFF
PCI standard PCI-to-PCI bridge
0xD4000000-0xD4000FFF
Standard OpenHCD USB Host Controller
0xD4001000-0xD4001FFF
Standard OpenHCD USB Host Controller
0xD4002000-0xD4002FFF
Standard Enhanced PCI to USB Host
Controller
0xD4003000-0xD40033FF
ATI SMBus
0xFFF80000-0xFFFFFFFF
System board
0xE0000000-0xE03FFFFF
System board
0xE0000000-0xE03FFFFF
System board resources
0x0000-0x0FFF
System board
6–16
Maintenance and Service Guide
Specifications
Table 6-9
System Memory Map (Continued)
Memory Map Address (hex)
System Function (shipping configuration)
0xD4208000-0xD42087FF
Texas Instruments OHCI Compliant IEEE
1394 Host Controller
0xD4200000-0xD4203FFF
Texas Instruments OHCI Compliant IEEE
1394 Host Controller
0xD4204000-0xD4205FFF
Broadcom 802.11b/g WLAN
0xFFEFF000-0xFFEFFFFF
Texas Instruments PCIxx21/x515 Cardbus
Controller
0xFFEFE000-0xFFEFEFFF
Texas Instruments PCIxx21/x515 Cardbus
Controller
0xF2C00000-0xF6BFFFFF
Texas Instruments PCIxx21/x515 Cardbus
Controller
0xD4206000-0xD4207FFF
Texas Instruments PCIxx21 Integrated
FlashMedia Controller
0xD4209000-0xD42090FF
SDA Standard Compliant SD Host Controller
0xD4208C00-0xD4208CFF
SDA Standard Compliant SD Host Controller
0xD4208800-0xD42088FF
SDA Standard Compliant SD Host Controller
Maintenance and Service Guide
6–17
Specifications
Table 6-9
System Memory Map (Continued)
Memory Map Address (hex)
System Function (shipping configuration)
0xD4209400-0xD42094FF
Realtek RTL8139/810x Family Fast Ethernet
NIC
0xD4003400-0xD40034FF
Conexant AC-Link Audio
0xD4003800-0xD40038FF
SoftV90 Data Fax Modem with SmartCP
0xFEC00000-0xFEC00FFF
System board resources
0xFEE00000-0xFEE00FFF
System board resources
0xA0000-0xBFFFF
PCI bus
0xA0000-0xBFFFF
PCI standard PCI-to-PCI bridge
0xA0000-0xBFFFF
ATI MOBILITY RADEON Xpress 200 Series
0xD6000-0xD7FFF
PCI bus
0xDC000-0xDDFFF
PCI bus
0xDD000-0xDDFFF
Texas Instruments PCIxx21/x515 Cardbus
Controller
0xE0000-0xFFFFF
System board
0x40000000-0xFFFFFFFF
PCI bus
6–18
Maintenance and Service Guide
A
Screw Listing
This appendix provides specification and reference information
for the screws used in the computer. All screws listed in this
appendix are available in the Screw Kit, spare part number
417108-001, and the Display Screw Kit, spare part number
417104-001.
Table A-1
Phillips PM3.0×3.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Silver
4
3.0 mm
3.0 mm
4.0 mm
Where used:
4 screws that secure the hard drive frame to the hard drive (documented in
Section 5.3)
Phillips PM3.0×3.0 Screw Locations
Maintenance and Service Guide
A–1
Screw Listing
Table A-2
Phillips PM2.0×5.0 Captive Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
5
5.0 mm
2.0 mm
4.0 mm
Where used:
1 Two screws that secure the hard drive cover to the computer (screws are
captured on the cover by C-clips; documented in Section 5.4)
2 Two screws that secure the memory module compartment cover to the
computer (screws are captured on the cover by C-clips; documented in
Section 5.7)
3 One screw that secures the Mini Card compartment cover to the computer
(screw is captured on the cover by a C-clip; documented in Section 5.8)
Phillips PM2.0×5.0 Captive Screw Locations
A–2
Maintenance and Service Guide
Screw Listing
Table A-3
Black Phillips PM2.5×5.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
15
5.0
2.5 mm
4.0 mm
Where used:
2 screws that secure the hard drive to the computer (documented in Section 5.4)
Black Phillips PM2.5×5.0 Screw Locations
Maintenance and Service Guide
A–3
Screw Listing
Table A-3
Black Phillips PM2.5×5.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
15
5.0
2.5 mm
4.0 mm
Where used:
2 screws that secure the display assembly to the computer (documented in
Section 5.12)
Black Phillips PM2.5×5.0 Screw Locations
A–4
Maintenance and Service Guide
Screw Listing
Table A-3
Black Phillips PM2.5×5.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
15
5.0
2.5 mm
4.0 mm
Where used:
4 screws that secure the display bezel to the display assembly (documented in
Section 5.12)
Black Phillips PM2.5×5.0 Screw Locations
Maintenance and Service Guide
A–5
Screw Listing
Table A-3
Black Phillips PM2.5×5.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
15
5.0
2.5 mm
4.0 mm
Where used:
2 screws that secure the display inverter to the display assembly (documented
in Section 5.12)
Black Phillips PM2.5×5.0 Screw Locations
A–6
Maintenance and Service Guide
Screw Listing
Table A-3
Black Phillips PM2.5×5.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
15
5.0
2.5 mm
4.0 mm
Where used:
2 screws that secure the audio/infrared board to the computer (documented in|
Section 5.17)
Phillips PM2.5×5.0 Screw Locations
Maintenance and Service Guide
A–7
Screw Listing
Table A-3
Black Phillips PM2.5×5.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
15
5.0
2.5 mm
4.0 mm
Where used:
2 screws that secure the system board to the computer (documented in
Section 5.22)
Phillips PM2.5×5.0 Screw Locations
A–8
Maintenance and Service Guide
Screw Listing
Table A-3
Black Phillips PM2.5×5.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
15
5.0
2.5 mm
4.0 mm
Where used:
One screw that secures the connector bracket to the computer (documented in|
Section 5.23)
Phillips PM2.5×5.0 Screw Location
Maintenance and Service Guide
A–9
Screw Listing
Table A-4
Phillips PM2.0×4.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
10
4.0 mm
2.0 mm
4.0 mm
Where used:
2 screws that secure the Mini Card module to the computer (documented in
Section 5.8)
Phillips PM2.0×4.0 Screw Locations
A–10
Maintenance and Service Guide
Screw Listing
Table A-4
Phillips PM2.0×4.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
10
4.0 mm
2.0 mm
4.0 mm
Where used:
4 screws that secure the top cover to the computer (documented in
Section 5.13)
Phillips PM2.0×4.0 Screw Locations
Maintenance and Service Guide
A–11
Screw Listing
Table A-4
Phillips PM2.0×4.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
10
4.0 mm
2.0 mm
4.0 mm
Where used:
2 screws that secure the modem module to the computer (documented in
Section 5.16)
Phillips PM2.0×4.0 Screw Locations
A–12
Maintenance and Service Guide
Screw Listing
Table A-4
Phillips PM2.0×4.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
10
4.0 mm
2.0 mm
4.0 mm
Where used:
2 screws that secure the ExpressCard assembly to the computer (documented
in Section 5.24)
Phillips PM2.0×4.0 Screw Locations
Maintenance and Service Guide
A–13
Screw Listing
Table A-5
Phillips PM2.5×7.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
11
7.0 mm
2.5 mm
4.0 mm
Where used:
1 One screw that secures the optical drive to the computer (documented in
Section 5.9)
2 Three screws that secure the keyboard to the computer (documented in
Section 5.10)
3 One screw that secures the top cover to the computer (documented in
Section 5.13)
Phillips PM2.5×7.0 Screw Locations
A–14
Maintenance and Service Guide
Screw Listing
Table A-5
Phillips PM2.5×7.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
11
7.0 mm
2.5 mm
4.0 mm
Where used:
2 screws that secure the display assembly to the computer (documented in
Section 5.12)
Phillips PM2.5×7.0 Screw Locations
Maintenance and Service Guide
A–15
Screw Listing
Table A-5
Phillips PM2.5×7.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
11
7.0 mm
2.5 mm
4.0 mm
Where used:
4 screws that secure the display hinges to the display assembly (documented in
Section 5.12)
Phillips PM2.5×7.0 Screw Locations
A–16
Maintenance and Service Guide
Screw Listing
Table A-6
Phillips PM2.0×3.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
18
3.0 mm
2.0 mm
4.0 mm
Where used:
2 screws that secure the optical drive bracket to the optical drive (documented in
Section 5.9)
Phillips PM2.0×3.0 Screw Locations
Maintenance and Service Guide
A–17
Screw Listing
Table A-6
Phillips PM2.0×3.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
18
3.0 mm
2.0 mm
4.0 mm
Where used:
2 screws that secure the power button board to the computer (documented in
Section 5.11)
Phillips PM2.0×3.0 Screw Locations
A–18
Maintenance and Service Guide
Screw Listing
Table A-6
Phillips PM2.0×3.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
18
3.0 mm
2.0 mm
4.0 mm
Where used:
2 screws that secure the Web camera to the Web camera bracket (documented
in Section 5.12)
Phillips PM2.0×3.0 Screw Locations
Maintenance and Service Guide
A–19
Screw Listing
Table A-6
Phillips PM2.0×3.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
18
3.0 mm
2.0 mm
4.0 mm
Where used:
2 screws that secure the top cover to the computer (documented in
Section 5.13)
Phillips PM2.0×3.0 Screw Locations
A–20
Maintenance and Service Guide
Screw Listing
Table A-6
Phillips PM2.0×3.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
18
3.0 mm
2.0 mm
4.0 mm
Where used:
5 screws that secure the TouchPad bracket to the top cover (documented in
Section 5.14)
Phillips PM2.0×3.0 Screw Locations
Maintenance and Service Guide
A–21
Screw Listing
Table A-6
Phillips PM2.0×3.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
18
3.0 mm
2.0 mm
4.0 mm
Where used:
1 Two screws that secure the wireless switch board to the computer
(documented in Section 5.15)
2 Two screws that secure the Bluetooth module to the computer (documented
in Section 5.18)
3 One screw that secures the display lid switch module to the computer
(documented in Section 5.21)
Phillips PM2.0×3.0 Screw Locations
A–22
Maintenance and Service Guide
Screw Listing
Table A-7
Phillips PM2.5×9.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
13
9.0 mm
2.5 mm
4.0 mm
Where used:
1 Three screws that secure the switch cover to the computer (documented in
Section 5.11)
2 One screw that secures the display assembly to the computer (documented
in Section 5.12)
Phillips PM2.5×9.0 Screw Locations
Maintenance and Service Guide
A–23
Screw Listing
Table A-7
Phillips PM2.5×9.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
13
9.0 mm
2.5 mm
4.0 mm
Where used:
2 screws that secure the display bezel to the display assembly (documented in
Section 5.12)
Phillips PM2.5×9.0 Screw Locations
A–24
Maintenance and Service Guide
Screw Listing
Table A-7
Phillips PM2.5×9.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
13
9.0 mm
2.5 mm
4.0 mm
Where used:
6 screws that secure the top cover to the computer (documented in
Section 5.12)
Phillips PM2.5×9.0 Screw Locations
Maintenance and Service Guide
A–25
Screw Listing
Table A-7
Phillips PM2.5×9.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
13
9.0 mm
2.5 mm
4.0 mm
Where used:
One screw that secures the top cover to the computer (documented in
Section 5.12)
Phillips PM2.5×9.0 Screw Location
A–26
Maintenance and Service Guide
Screw Listing
Table A-8
Silver Phillips PM2.5×5.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Silver
3
5.0
2.5 mm
4.0 mm
Where used:
One screw that secures the switch cover to the computer (documented in
Section 5.11)
Silver Phillips PM2.5×5.0 Screw Location
Maintenance and Service Guide
A–27
Screw Listing
Table A-8
Silver Phillips PM2.5×5.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Silver
3
5.0
2.5 mm
4.0 mm
Where used:
2 screws that secure the base enclosure trim to the computer (documented in
Section 5.21)
Silver Phillips PM2.5×5.0 Screw Locations
A–28
Maintenance and Service Guide
Screw Listing
Table A-9
Phillips PM2.5×4.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
11
4.0 mm
2.5 mm
4.0 mm
Where used:
1 One screw that secures the Web camera to the display enclosure
(documented in Section 5.9)
2 Two screws that secure the wireless antenna transceivers to the
display enclosure (documented in Section 5.9)
Phillips PM2.5×4.0 Screw Locations
Maintenance and Service Guide
A–29
Screw Listing
Table A-9
Phillips PM2.5×4.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
11
4.0 mm
2.5 mm
4.0 mm
Where used:
4 screws that secure the top cover to the computer (documented in
Section 5.13)
Phillips PM2.5×4.0 Screw Locations
A–30
Maintenance and Service Guide
Screw Listing
Table A-9
Phillips PM2.5×4.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
11
4.0 mm
2.5 mm
4.0 mm
Where used:
One screw that secures the USB board to the computer (documented in
Section 5.19)
Phillips PM2.5×4.0 Screw Location
Maintenance and Service Guide
A–31
Screw Listing
Table A-9
Phillips PM2.5×4.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
11
4.0 mm
2.5 mm
4.0 mm
Where used:
3 screws that secure the speaker assembly to the computer (documented in
Section 5.20)
Phillips PM2.5×4.0 Screw Locations
A–32
Maintenance and Service Guide
Screw Listing
Table A-10
Phillips PM2.0×2.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Silver
2
2.0 mm
2.0 mm
4.0 mm
Where used:
2 screws that secure the TouchPad board to the TouchPad bracket
(documented in Section 5.13)
Phillips PM2.0×2.0 Screw Locations
Maintenance and Service Guide
A–33
Screw Listing
Table A-11
Phillips PM2.0×8.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
2
8.0 mm
2.0 mm
4.0 mm
Where used:
2 screws that secure the fan/heat sink assembly to the system board
(documented in Section 5.25)
Phillips PM2.0×8.0 Screw Locations
A–34
Maintenance and Service Guide
Screw Listing
Table A-12
Phillips PM2.0×13.0 Spring-Loaded Shoulder Screw
mm
Color
Qty.
Length
Thread
Head
Width
Silver
8
13.0 mm
2.0 mm
6.0 mm
Where used:
4 screws that secure the fan/heat sink assembly to the system board on
computer models using Intel processors (documented in Section 5.25)
Phillips PM2.0×13.0 Spring-Loaded Shoulder Screw Locations
Maintenance and Service Guide
A–35
Screw Listing
Table A-12
Phillips PM2.0×13.0 Spring-Loaded Shoulder Screw
(Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Silver
8
13.0 mm
2.0 mm
6.0 mm
Where used:
4 screws that secure the fan/heat sink assembly to the system board on
computer models using AMD processors (documented in Section 5.25)
Phillips PM2.0×13.0 Spring-Loaded Shoulder Screw Locations
A–36
Maintenance and Service Guide
Screw Listing
Table A-13
Phillips PM2.0×9.0 Spring-Loaded Shoulder Screw
mm
Color
Qty.
Length
Thread
Head
Width
Silver
2
9.0 mm
2.0 mm
6.0 mm
Where used:
One screw that secures the fan/heat sink assembly to the system board on
computer models using Intel processors (documented in Section 5.25)
Phillips PM2.0×9.0 Spring-Loaded Shoulder Screw Location
Maintenance and Service Guide
A–37
Screw Listing
Table A-13
Phillips PM2.0×9.0 Spring-Loaded Shoulder Screw
(Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Silver
2
9.0 mm
2.0 mm
6.0 mm
Where used:
One screw that secures the fan/heat sink assembly to the system board on
computer models using AMD processors (documented in Section 5.25)
Phillips PM2.0×9.0 Spring-Loaded Shoulder Screw Location
A–38
Maintenance and Service Guide
B
Backup and Recovery
Recovering System Information
Tools provided by the operating system and PC Recovery
software are designed to help you with the following tasks for
safeguarding your information and restoring it in case of a system
failure:
■
Back up your information regularly to protect your important
system files.
■
Make a set of recovery discs (PC Recovery software feature).
Recovery discs are used to start up (boot) your computer and
restore the operating system and software programs to factory
settings in case of system failure or instability.
■
Create system restore points (operating system feature).
System restore points allow you to reverse undesirable
changes to your computer by restoring the computer to an
earlier state.
■
Recover a program or driver (PC Recovery software feature).
This feature helps you reinstall a program or driver without
performing a full system recovery.
■
Perform a full system recovery (PC Recovery software
feature). With PC Recovery, you can recover your full
factory image if you experience system failure or instability.
PC Recovery works from a dedicated recovery partition on
the hard drive or from recovery discs you create.
Maintenance and Service Guide
B–1
Backup and Recovery
Backing Up Your Information
When to Back Up
■
On a regularly scheduled basis.
✎ Set reminders to back up your information periodically.
■
Before the computer is repaired or restored.
■
Before you add or modify hardware or software.
Backup Suggestions
■
Create system restore points using Windows XP Professional
System Restore feature.
■
Store personal files in the My Documents folder and back up
these folders periodically.
■
Back up templates stored in their associated programs.
■
Save customized settings in a window, toolbar, or menu bar
by taking a screen shot of your settings.
The screen shot can be a time saver if you have to reset your
preferences.
To copy the screen and paste it into a Word document:
a. Display the screen.
b. Copy the screen:
To copy only the active window, press alt+fn+prt sc.
To copy the entire screen, press fn+prt sc.
c. To paste the copied images into a document, open Word,
and then select Edit > Paste.
B–2
Maintenance and Service Guide
Backup and Recovery
Using System Restore Points
When you back up your system, you are creating a system restore
point. A system restore point allows you to save and name a
snapshot of your hard drive at a specific point in time. You can
then recover back to that point if you want to reverse subsequent
changes made to your system.
to an earlier restore point does not affect data files
✎ Recovering
saved or e-mails created since the last restore point.
You also can create additional restore points to provide increased
protection for your system files and settings.
When to Create Restore Points
■
Before you add or extensively modify software or hardware.
■
Periodically, whenever the system is performing optimally.
revert to a restore point and then change your mind, you
✎ Ifcanyoureverse
the restoration.
Create a System Restore Point
1. Select Start > Help and Support, and then click System
Restore.
The System Restore window opens.
2. Click Create a restore point, and then click Next.
3. Follow the on-screen instructions.
Maintenance and Service Guide
B–3
Backup and Recovery
Restore to a Previous Date and Time
To revert to a restore point (created at a previous date and time),
when the computer was functioning optimally:
1. Select Start > Help and Support, and then click System
Restore.
The System Restore window opens.
2. Click Restore my computer to an earlier time, and then
click Next.
3. Follow the on-screen instructions.
Creating Recovery Discs
PC Recovery Disc Creator creates a set of recovery CDs or DVDs
for the computer. Use recovery discs to restore the operating
system and software programs to factory settings, in case of
system failure or instability.
these discs carefully and keep them in a safe place. The
✎ Handle
software allows the creation of only one set of recovery discs.
Note the following guidelines before creating recovery discs:
■
You will need high quality CD-R, DVD-R, or DVD+R media
(purchased separately).
and double-layer DVD±RW are not compatible
✎ DVD±RW/R
with the PC Recovery Disc Creator software.
B–4
■
The computer must be connected to AC power during this
process.
■
Only one set of recovery discs can be created per computer.
Maintenance and Service Guide
Backup and Recovery
■
Number each disc before inserting it into the computer
optical drive.
■
If necessary, you can exit the program before you have
finished creating the recovery discs. The next time you open
PC Recovery Disc Creator, you will be prompted to continue
the disc creation process.
To create a set of recovery discs:
1. Select Start > All Programs > System Recovery >
PC Recovery Disc Creator.
The PC Recovery Disc Creator tool opens.
2. Click Next.
you are operating the computer on battery power, you will be
✎ Ifprompted
to connect to AC power before you can go to the
next step.
3. Select the type of disc you want to use and click Next.
software examines the image and displays the number of
✎ The
blank discs needed to create your recovery discs.
4. Insert the first disc and follow the on-screen instructions to
complete the creation of the recovery discs.
Maintenance and Service Guide
B–5
Backup and Recovery
Reinstalling Software Programs and Drivers
If a program or driver preinstalled at the factory is accidentally
erased or is damaged, the Application and Driver Recovery tool
allows you to reinstall it.
not provided with this computer must be reinstalled
✎ Software
from the disc provided by the manufacturer or downloaded
from the manufacturer's Web site.
✎ Before reinstalling the program, be sure it is fully uninstalled.
The Application and Driver Recovery tool replaces corrupted
system files and reinstalls deleted system files within the
program.
■
In most cases, if the program you are reinstalling is still on
your computer, the reinstallation process does not affect your
personal settings.
■
In all cases, if a program has been deleted from your
computer, the reinstallation process reinstalls the program or
utility to the factory image but cannot restore your personal
settings.
Reinstalling Preinstalled Programs and
Drivers
1. Remove the program or driver:
some cases, drivers are not listed in the Add or Remove
✎ InPrograms
list. If the driver is not listed, it does not need to be
removed.
a. Select Start > Control Panel > Add or Remove
Programs.
b. Click the program or driver you want to remove, and then
click Change/Remove.
B–6
Maintenance and Service Guide
Backup and Recovery
2. Select Start > All Programs > System Recovery >
Application and Driver Recovery.
The Application and Driver Recovery tool opens.
3. Select Application Installation or Driver Installation, and
then click Next.
4. Follow the on-screen instructions to complete the program or
driver recovery.
5. Restart the computer if prompted.
Reinstalling Programs from Discs
1. Insert the disc into the optical drive.
2. When the installation wizard opens, follow the installation
instructions on the screen.
3. Restart the computer if prompted.
Performing a Recovery
PC Recovery software allows you to repair or restore the system
if you experience system failure or instability. PC Recovery
works from recovery discs that you create or from a dedicated
recovery partition on the hard drive.
Windows XP has its own built-in repair features,
✎ Microsoft
such as System Restore and driver roll-back capabilities. If you
have not already tried these features, try them before using
PC Recovery.
Recovery only recovers software that was preinstalled at
✎ PC
the factory. Software not provided with this computer must be
reinstalled from the disc provided by the manufacturer or
downloaded from the manufacturer's Web site.
Maintenance and Service Guide
B–7
Backup and Recovery
Recovering from the Recovery Discs
To restore the system from the recovery discs:
1. Back up all personal files.
2. Insert the first recovery disc into the optical drive and restart
the computer.
3. Follow the on-screen instructions.
Recovering from the Partition on the
Hard Drive
You can perform a recovery from the partition on the hard drive
from either the Start button or f11.
To restore the system from the partition:
1. Access the PC Recovery tool:
❏ To access PC Recovery from the Start button, select
Start > All Programs > System Recovery >
PC Recovery.
❏ To access PC Recovery from f11, restart the computer and
press f11 while the “Press <F11> for recovery” message is
displayed on the screen.
The PC Recovery tool opens.
2. Select PC Recovery and click Next.
The computer restarts and the PC Recovery tool opens.
3. Click OK.
4. Follow the on-screen instructions to complete the system
recovery.
If you want to perform a destructive recovery:
destructive recovery formats the hard drive and restores the
✎ Acomputer
to its factory state. Select this option only as a last
resort.
B–8
Maintenance and Service Guide
Backup and Recovery
a. Click Advanced Options on the System Recovery screen.
b. Select Destructive Recovery and follow the on-screen
instructions.
Deleting the Recovery Partition on the
Hard Drive
The PC Recovery Advanced Options menu provides the option of
deleting the recovery partition, which will increase space on the
hard drive. Delete the recovery partition only if you have already
created recovery discs.
Ä
CAUTION: After you create the recovery discs, you can increase
space on the hard drive by deleting the recovery partition. However,
doing this is not recommended. If you delete this partition, you will lose
any information that is on the partition, including the PC Recovery
software. Thereafter, you must use the recovery discs to access PC
Recovery software.
To delete the recovery partition:
1. If you have not already created recovery discs, create
them now.
2. Select Start > All Programs > System Recovery >
PC Recovery.
The PC Recovery tool opens.
3. Select PC Recovery and click Next.
The computer restarts and the PC Recovery tools opens.
4. Click OK.
5. At the System Recovery screen, click Advanced Options.
6. Select Delete Recovery Partition (not recommended) and
follow the on-screen instructions.
Maintenance and Service Guide
B–9
Backup and Recovery
Updating Reinstalled Software
After you perform a system recovery, connect to the Internet to
update all reinstalled software.
To access update links for the operating system and other
software provided on your computer:
»
Select Start > Help and Support.
To update optional software, follow the instructions provided by
the software manufacturer. Some programs include an update
feature you can access from a Help button or menu within the
program.
B–10
Maintenance and Service Guide
C
Display Component Recycling
Å
WARNING: The backlight contains mercury. Caution should be
exercised when removing and handling the backlight to avoid
damaging this component and causing exposure to the mercury.
Ä
CAUTION: The procedures in this appendix can result in damage to
display components. The only components intended for recycling
purposes are the liquid crystal display (LCD) panel and the backlight.
Careful handling should be exercised when removing these
components.
Disposal
✎ Materials
This HP product contains mercury in the display assembly
backlight and may require special handling at end-of-life.
Disposal of mercury may be regulated because of environmental
considerations. For disposal or recycling information, contact
your local authorities or visit the Electronic Industries Alliance
(EIA) at http://www.eiae.org.
Maintenance and Service Guide
C–1
Display Component Recycling
This appendix provides disassembly instructions for the display
assembly. The display assembly must be disassembled to gain
access to the backlight 1 and the LCD panel 2.
procedures differ from one display assembly to
✎ Disassembly
another. The procedures provided in this appendix are general
disassembly instructions. Specific details, such as screw sizes,
quantities, and locations, and component shapes and sizes, can
vary from one computer model to another.
Refer to Section 5.12, “Display Assembly,” for display assembly
disassembly steps.
C–2
Maintenance and Service Guide
Display Component Recycling
Perform the following steps to disassemble the display assembly:
1. Remove all screw covers 1 and screws 2 that secure the
display bezel to the display assembly.
Removing the Display Bezel Screw Covers and Screws
Maintenance and Service Guide
C–3
Display Component Recycling
2. Lift up and out on the left and right inside edges 1 and the
top and bottom inside edges 2 of the display bezel until
the bezel disengages from the display assembly.
3. Remove the display bezel 3.
Removing the Display Bezel
C–4
Maintenance and Service Guide
Display Component Recycling
4. Disconnect all LCD panel cables 1 from the display inverter
board and remove the inverter board 2.
Removing the Display Inverter Board
Maintenance and Service Guide
C–5
Display Component Recycling
5. Remove all screws 1 that secure the LCD panel to the
display enclosure.
6. Remove the LCD panel 2 from the display enclosure.
Removing the LCD Panel
C–6
Maintenance and Service Guide
Display Component Recycling
7. Turn the LCD panel upside down.
8. Remove all screws that secure the LCD panel frame to the
LCD panel.
Removing the LCD Panel Frame Screws
Maintenance and Service Guide
C–7
Display Component Recycling
9. Use a sharp-edged tool to cut the tape 1 that secures the side
of the LCD panel to the LCD panel frame.
10. Remove the LCD panel frame 2 from the display panel.
Removing the LCD Panel Frame
C–8
Maintenance and Service Guide
Display Component Recycling
11. Remove the screws 1 that secure the backlight cover to the
LCD panel.
12. Lift the top edge of the backlight cover 2 and swing it
forward.
13. Remove the backlight cover.
Removing the Backlight Cover
Maintenance and Service Guide
C–9
Display Component Recycling
14. Turn the LCD panel right-side up.
15. Remove the backlight cables 1 from the clip 2 in the
LCD panel.
Releasing the Backlight Cables
C–10
Maintenance and Service Guide
Display Component Recycling
16. Turn the LCD panel upside down.
17. Remove the backlight frame from the LCD panel.
Removing the Backlight Frame
Maintenance and Service Guide
C–11
Display Component Recycling
Å
WARNING: The backlight contains mercury. Caution should be
exercised when removing and handling the backlight to avoid
damaging this component and causing exposure to the mercury.
18. Slide the backlight out of the backlight frame.
Removing the Backlight
C–12
Maintenance and Service Guide
Display Component Recycling
19. Disconnect the display cable 1 from the LCD panel.
20. Remove the screws 2 that secure the LCD panel to the LCD
rear panel.
21. Release the LCD panel 3 from the LCD rear panel.
22. Release the tape 4 that secures the LCD panel to the LCD
rear panel.
Releasing the LCD Panel
Maintenance and Service Guide
C–13
Display Component Recycling
23. Remove the LCD panel.
Removing the LCD Panel
24. Recycle the backlight and LCD panel.
C–14
Maintenance and Service Guide
D
Connector Pin Assignments
Table D-1
Universal Serial Bus
Pin
Signal
Pin
Signal
1
+5 VDC
3
Data +
2
Data –
4
Ground
Maintenance and Service Guide
D–1
Connector Pin Assignments
Table D-2
RJ-45 (Network)
Pin
Signal
Pin
Signal
1
Transmit +
5
Unused
2
Transmit –
6
Receive –
3
Receive +
7
Unused
4
Unused
8
Unused
D–2
Maintenance and Service Guide
Connector Pin Assignments
Table D-3
S-Video-Out
Pin
Signal
Pin
Signal
1
TV-Ground
5
TV-CD
2
TV-CVBS
6
TV-Ground
3
TV-Ground
7
TV-YD
4
TV-Ground
Maintenance and Service Guide
D–3
Connector Pin Assignments
Table D-4
External Monitor
Pin
Signal
Pin
Signal
1
Red analog
9
+5 VDC
2
Green analog
10
Ground
3
Blue analog
11
Monitor detect
4
Not connected
12
DDC 2B data
5
Ground
13
Horizontal sync
6
Ground analog
14
Vertical sync
7
Ground analog
15
DDC 2B clock
8
Ground analog
D–4
Maintenance and Service Guide
Connector Pin Assignments
Table D-5
RJ-11 (Modem)
Pin
Signal
Pin
Signal
1
Unused
4
Unused
2
Tip
5
Unused
3
Ring
6
Unused
Maintenance and Service Guide
D–5
Connector Pin Assignments
Table D-6
Audio-In (Microphone)
Pin
Signal
Pin
Signal
1
Audio signal in
3
Ground
2
Audio signal in
Table D-7
Audio-Out (Headphone)
Pin
Signal
Pin
Signal
1
Audio out, left channel
3
Ground
2
Audio out, right channel
D–6
Maintenance and Service Guide
E
Power Cord Set Requirements
3-Conductor Power Cord Set
The wide range input feature of the computer permits it to operate
from any line voltage from 100 to 120 or 220 to 240 volts AC.
The power cord set included with the computer meets the
requirements for use in the country where the equipment
is purchased.
Power cord sets for use in other countries must meet the
requirements of the country where the computer is used.
Maintenance and Service Guide
E–1
Power Cord Set Requirements
General Requirements
The requirements listed below are applicable to all countries.
E–2
■
The length of the power cord set must be at least 1.5 m
(5.0 ft) and a maximum of 2.0 m (6.5 ft).
■
All power cord sets must be approved by an acceptable
accredited agency responsible for evaluation in the
country where the power cord set will be used.
■
The power cord sets must have a minimum current capacity
of 10 amps and a nominal voltage rating of 125 or 250 V AC,
as required by each country’s power system.
■
The appliance coupler must meet the mechanical
configuration of an EN 60 320/IEC 320 Standard Sheet C13
connector for mating with the appliance inlet on the back of
the computer.
Maintenance and Service Guide
Power Cord Set Requirements
Country-Specific Requirements
3-Conductor Power Cord Set Requirements
Country/Region
Accredited Agency
Applicable Note Number
Australia
EANSW
1
Austria
OVE
1
Belgium
CEBC
1
Canada
CSA
2
Denmark
DEMKO
1
Finland
FIMKO
1
France
UTE
1
Germany
VDE
1
Italy
IMQ
1
Japan
METI
3
✎ NOTES:
1. The flexible cord must be <HAR> Type HO5VV-F, 3-conductor, 1.0 mm²
conductor size. Power cord set fittings (appliance coupler and wall plug)
must bear the certification mark of the agency responsible for evaluation
in the country where it will be used.
2. The flexible cord must be Type SPT-3 or equivalent, No. 18 AWG,
3-conductor. The wall plug must be a two-pole grounding type with a
NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration.
3. The appliance coupler, flexible cord, and wall plug must bear a “T” mark
and registration number in accordance with the Japanese Dentori Law. The
flexible cord must be Type VCT or VCTF, 3-conductor, 1.00 mm² conductor
size. The wall plug must be a two-pole grounding type with a Japanese
Industrial Standard C8303 (7 A, 125 V) configuration.
Maintenance and Service Guide
E–3
Power Cord Set Requirements
3-Conductor Power Cord Set Requirements (Continued)
Country/Region
Accredited Agency
Applicable Note Number
Korea
EK
4
The Netherlands
KEMA
1
Norway
NEMKO
1
People’s Republic
of China
CCC
5
Sweden
SEMKO
1
Switzerland
SEV
1
Taiwan
BSMI
4
United Kingdom
BSI
1
United States
UL
2
✎ NOTES:
1. The flexible cord must be <HAR> Type HO5VV-F, 3-conductor, 1.0 mm²
conductor size. Power cord set fittings (appliance coupler and wall plug)
must bear the certification mark of the agency responsible for evaluation
in the country where it will be used.
2. The flexible cord must be Type SPT-3 or equivalent, No. 18 AWG,
3-conductor. The wall plug must be a two-pole grounding type with a
NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration.
3. The appliance coupler, flexible cord, and wall plug must bear a “T” mark
and registration number in accordance with the Japanese Dentori Law. The
flexible cord must be Type VCT or VCTF, 3-conductor, 1.00 mm² conductor
size. The wall plug must be a two-pole grounding type with a Japanese
Industrial Standard C8303 (7 A, 125 V) configuration.
4. The flexible cord must be Type RVV, 3-conductor, 0.75 mm² conductor size.
Power cord set fittings (appliance coupler and wall plug) must bear
the certification mark of the agency responsible for evaluation in the country
where it will be used.
5. The flexible cord must be Type VCTF, 3-conductor, 0.75 mm² conductor
size. Power cord set fittings (appliance coupler and wall plug) must bear the
certification mark of the agency responsible for evaluation in the country
where it will be used.
E–4
Maintenance and Service Guide
Index
1394 port 1–11
A
AC adapter, spare part
numbers 3–22, 3–27
analog TV tuner, spare part
number 3–22, 3–26
arrow keys 1–13
audio troubleshooting 2–25
audio/infrared board
removal 5–56
spare part number 3–7,
3–31, 5–56
audio-in (microphone) jack
location 1–7
pin assignments D–6
audio-out (headphone) jack
location 1–7
pin assignments D–6
B
base enclosure, spare part
numbers 3–9, 3–32, 3–33
battery
removal 5–5
spare part numbers 3–11,
3–30, 5–5
battery bay 1–20
battery light 1–6
Maintenance and Service Guide
battery release latch 1–20
Bluetooth module
removal 5–58
spare part number 3–9,
3–25, 5–58
Bluetooth module cable,
illustrated 3–21
bottom components 1–20
C
Cable Kit
contents 3–21
spare part number 3–21,
3–31
cables, service considerations
4–2
caps lock key 1–13
caps lock light 1–15
CMOS clearing 1–4
components
bottom 1–20
front 1–6
keyboard 1–12
left-side 1–10
right-side 1–8
top 1–14, 1–16, 1–18
TouchPad 1–19
Index–1
Index
composite S-Video and audio
input cable, spare part
number 3–22, 3–26
computer feet, locations 5–12
Computer Setup
Advanced Menu 2–8
File Menu 2–6
Security Menu 2–6
Tools Menu 2–7
computer specifications 6–1
connector pin assignments
external monitor D–4
headphone D–6
microphone D–6
monitor D–4
RJ-11 (modem) D–5
RJ-45 (network) D–2
S-Video-out D–3
Universal Serial Bus (USB)
D–1
connectors, service
considerations 4–2
D
design overview 1–22
Digital Media Slot 1–11
Digital Media Slot light 1–11
disassembly sequence chart
5–3
diskette drive, OS loading
problems 2–23
display assembly
removal 5–30
spare part number 3–3,
3–29, 5–30
specifications 6–3
Index–2
display bezel
removal 5–34
spare part numbers 5–34
Display Cable Kit, spare part
number 3–32, 5–41, 5–42
Display Hinge Kit, spare part
numbers 3–32, 3–33, 5–38
display hinge, removal 5–38
Display Label Kit, spare part
number 3–32
display lid switch module
removal 5–64
spare part number 3–31,
5–64
display panel
removal 5–39
spare part numbers 3–32,
5–39
Display Plastics Kit, spare part
numbers 3–32, 3–33
Display Screw Kit, spare part
number 3–32
docking device,
troubleshooting 2–18
drive light 1–6
drives, preventing damage 4–3
DVB-T TV tuner antenna,
spare part number 3–22,
3–27
DVB-T TV tuner, spare part
number 3–22, 3–27
DVD button 1–17
DVD/CD-RW Combo Drive
OS loading problems 2–24
precautions 4–3
removal 5–20
Maintenance and Service Guide
Index
spare part number 3–15,
3–19, 3–29, 5–20
specifications 6–6
DVD±RW and CD-RW
Combo Drive, OS loading
problems 2–24
DVD±RW/R and CD-RW
Combo Drive
precautions 4–3
removal 5–20
spare part numbers 3–15,
3–19, 3–29, 5–20
specifications 6–8, 6–9
E
electrostatic discharge 4–4,
4–8
expansion port 3 1–11
ExpressCard assembly
removal 5–73
spare part number 3–5,
3–32, 5–73
ExpressCard slot 1–11
ExpressCard slot bezel,
illustrated 3–20
external monitor port
location 1–11
pin assignments D–4
F
f1 to f12 keys 1–13
fan/heat sink assembly
removal 5–76
spare part numbers 3–9,
3–31, 3–33, 3–34, 5–76
Maintenance and Service Guide
fan/heat sink assembly
mounting bracket
installing 5–82, 5–83
spare part number 3–9,
3–32, 5–82
features 1–2
feet, locations 5–12
flowcharts, troubleshooting
no audio 2–25, 2–26
no network/modem
connection 2–30
no OS loading 2–19
no OS loading from
diskette drive 2–23
no OS loading from hard
drive 2–20, 2–21, 2–22
no OS loading from optical
drive 2–24
no power 2–12, 2–14, 2–15
no video 2–16, 2–17
nonfunctioning device
2–27
nonfunctioning docking
device 2–18
nonfunctioning keyboard
2–28
nonfunctioning pointing
device 2–29
fn key 1–13
front components 1–6
G
grounding equipment and
methods 4–7
Index–3
Index
H
L
hard drive
OS loading problems 2–20
precautions 4–3
removal 5–7
spare part numbers 3–11,
3–19, 3–29, 3–32, 5–7
specifications 6–4
hard drive bay 1–20
hard drive cover
illustrated 3–20
removal 5–8
headphone jack
location 1–7
pin assignments D–6
headset, spare part number
3–22, 3–25
HP Remote Control, spare part
number 3–22
LED board cable
illustrated 3–21
removal 5–29
left-side components 1–10
I
I/O address specifications 6–13
infrared port 1–7
interrupt specifications 6–11
inverter
removal 5–37
spare part number 3–32,
5–37
K
keyboard
removal 5–22
spare part numbers 3–3,
3–30, 3–31, 5–22
troubleshooting 2–28
keyboard components 1–12
keypad keys 1–13
Index–4
M
mass storage devices, spare
part numbers 3–18
Media button 1–17
memory module
removal 5–13
spare part numbers 3–11,
3–29, 5–13
memory module compartment
1–21
memory module compartment
cover
illustrated 3–20
removal 5–14
microphone
location 1–15
removal 5–41
microphone jack
location 1–7
pin assignments D–6
Mini Card compartment 1–21
Mini Card compartment cover
illustrated 3–20
removal 5–18
Mini Card module
removal 5–16
spare part numbers 3–13,
3–15, 3–26, 3–27, 3–28,
5–16
Maintenance and Service Guide
Index
modem connector, removal
5–72
modem jack
location 1–9
pin assignments D–5
modem module
removal 5–54
spare part numbers 3–5,
3–31, 3–34, 5–54
modem, troubleshooting 2–30
monitor port
location 1–11
pin assignments D–4
mouse, spare part number
3–22, 3–25, 3–33
N
network jack
location 1–11
pin assignments D–2
network, troubleshooting 2–30
Next/Fast Forward button
1–18
nonfunctioning device,
troubleshooting 2–18, 2–27
num lock key 1–13
num lock light 1–15
O
optical drive
location 1–9, 1–20
OS loading problems 2–24
precautions 4–3
removal 5–20
spare part numbers 3–15,
3–19, 5–20
specifications 6–8, 6–9
Maintenance and Service Guide
P
packing precautions 4–5
password clearing 1–4
plastic parts 4–2
Plastics Kit
contents 3–20
spare part number 3–5,
3–20, 3–31
Play/Pause button 1–18
pointing device,
troubleshooting 2–29
power button 1–15
power button board
removal 5–29
spare part number 3–3,
3–31, 5–29
power connector 1–9
power connector cable
removal 5–71
spare part numbers 3–9,
3–33, 5–71
power cord
set requirements E–2
spare part numbers 3–24,
3–25
power light 1–6
power management features
1–5
power, troubleshooting 2–12
Previous/Rewind button 1–18
processor
removal 5–84
spare part numbers 3–7,
3–9, 3–28, 3–29, 3–32,
3–33, 3–34, 5–84
Index–5
Index
R
remote control, spare part
number 3–25
removal
preliminaries 4–1
procedures 5–1
replacement
preliminaries 4–1
procedures 5–1
RF cable, spare part number
3–22, 3–26
RF input adapter cable, spare
part number 3–22, 3–26
right-side components 1–8
RJ-11 (modem) jack
location 1–9
pin assignments D–5
RJ-45 (network) jack
location 1–11
pin assignments D–2
RTC battery
removal 5–11
spare part number 3–11,
3–31, 5–11
Rubber Feet Kit, spare part
number 3–9, 3–32
S
Screw Kit, spare part number
3–23, 3–32
screw listing A–1
security cable slot 1–11
serial number 3–1, 5–2
service considerations 4–2
Setup Utility 2–1
Index–6
speaker assembly
removal 5–62
spare part number 3–5,
3–31, 5–62
speakers 1–15
specifications
computer 6–1
display 6–3
DVD/CD-RW Combo
Drive 6–6
DVD±RW/R and CD-RW
Combo Drive 6–8, 6–9
hard drive 6–4
I/O addresses 6–13
interrupts 6–11
optical drive 6–8, 6–9
system DMA 6–10
static shielding materials 4–8
Stop button 1–18
S-Video-out jack
location 1–11
pin assignments D–3
switch cover
removal 5–26
spare part numbers 3–3,
3–31, 5–26
system board
removal 5–68
spare part numbers 3–7,
3–28, 3–33, 5–68
system DMA 6–10
T
tools required 4–1
top components 1–14, 1–16,
1–18
Maintenance and Service Guide
Index
top cover
removal 5–43
spare part numbers 3–5,
3–31, 3–33, 5–43
top cover rear strip
removal 5–66
spare part numbers 3–5,
3–31, 3–33, 5–66
TouchPad 1–19
removal 5–48
spare part number 3–5,
3–33, 5–48
TouchPad buttons 1–19
TouchPad cable
illustrated 3–21
removal 5–49
spare part number 3–5,
3–31, 5–48
TouchPad components 1–19
TouchPad on/off button 1–19
TouchPad scroll zone 1–19
transporting precautions 4–5
troubleshooting
audio 2–25
docking device 2–18
flowcharts 2–9
keyboard 2–28
modem 2–30
network 2–30
nonfunctioning device
2–18, 2–27
OS loading 2–19
overview 2–1
pointing device 2–29
power 2–12
video 2–16
Maintenance and Service Guide
U
Universal Serial Bus (USB)
connector
location 1–9, 1–11
pin assignments D–1
unknown password 1–4
USB board
removal 5–60
spare part number 3–9,
3–31, 5–60
USB board cable, illustrated
3–21
USB digital drive, spare part
number 3–19, 3–25
USB infrared receiver, spare
part number 3–22, 3–26
USB travel mouse, spare part
number 3–22, 3–25
V
vents 1–21
video troubleshooting 2–16
volume button 1–15
volume scroll zone 1–15
W
Web camera
location 1–15
removal 5–35
spare part number 3–17,
3–32, 5–35
Web camera bracket, removal
5–36
Web camera cable, removal
5–42
Windows applications key
1–13
Index–7
Index
Windows logo key 1–13
wireless antenna
removal 5–40
spare part number 3–32,
5–40
wireless laser mouse, spare
part number 3–22, 3–33
wireless light 1–7
wireless switch 1–7
wireless switch board
removal 5–52
spare part number 3–7,
3–31, 5–52
workstation precautions 4–6
Index–8
Maintenance and Service Guide