Brother MFC-9320CW User`s guide

Multi-Protocol On-board Ethernet Multi-function Print Server and
Wireless (IEEE 802.11b/g) Ethernet Multi-function Print Server
NETWORK
USER’S GUIDE
DCP-9010CN
MFC-9010CN
MFC-9120CN
MFC-9320CW
Not all models are available in all countries.
Please read this manual thoroughly before using this machine on
your network. You can view this manual in the CD-ROM at any
time, please keep the CD-ROM in a convenient place for quick
and easy reference at all times. You can also download the
manual in PDF format from the Brother Solutions Center.
(http://solutions.brother.com/)
The Brother Solutions Center (http://solutions.brother.com/) is
your one stop resource for all your printing needs. Download the
latest drivers and utilities for your machine, read FAQs and
troubleshooting tips or learn about special printing solutions.
Version A
ENG
Definitions of notes
We use the following icon throughout this User’s Guide:
IMPORTANT
Note
IMPORTANT indicates a potentially hazardous situation which, if not avoided, may result in
damage to property or loss of product functionality.
Notes tell you how you should respond to a situation that may arise or give tips about how
the operation works with other features.
Trademarks
The Brother logo is a registered trademark of Brother Industries, Ltd.
Brother is a registered trademark of Brother Industries, Ltd.
Microsoft, Windows, Windows Server, Outlook and Internet Explorer are registered trademarks of Microsoft
Corporation in the United States and/or other countries.
Windows Vista is either a registered trademark or a trademark of Microsoft Corporation in the United States
and other countries.
Apple, Macintosh, Safari and TrueType are trademarks of Apple Inc., registered in the United States and
other countries.
Linux is the registered trademark of Linus Torvalds in the U.S. and other countries.
UNIX is a registered trademark of The Open Group in the United States and other countries.
Adobe, Flash, Illustrator, Photoshop, PostScript and PostScript 3 are either registered trademarks or
trademarks of Adobe Systems Incorporated in the United States and/or other countries.
Corel and CorelDRAW are trademarks or registered trademarks of Corel Corporation and/or its subsidiaries
in Canada, the United States and/or other countries.
BROADCOM, SecureEasySetup and the SecureEasySetup logo are trademarks or registered trademarks of
Broadcom Corporation in the United States and/or other countries.
WPA, WPA2, Wi-Fi Protected Access and Wi-Fi Protected Setup are either trademarks or registered
trademarks of Wi-Fi Alliance in the United States and/or other countries.
Wi-Fi and Wi-Fi Alliance are registered trademarks of the Wi-Fi Alliance.
AOSS is a trademark of Buffalo Inc.
Any trade names and product names of companies appearing on Brother products, related
documents and any other materials are all trademarks or registered trademarks of those respective
companies.
i
Compilation and publication notice
Under the supervision of Brother Industries, Ltd., this manual has been compiled and published, covering the
latest product’s descriptions and specifications.
The contents of this manual and the specifications of this product are subject to change without notice.
Brother reserves the right to make changes without notice in the specifications and materials contained
herein and shall not be responsible for any damages (including consequential) caused by reliance on the
materials presented, including but not limited to typographical and other errors relating to the publication.
©2011 Brother Industries, Ltd.
IMPORTANT NOTE
 This product is approved for use in the country of purchase only.
Do not use this product outside the country of purchase as it may violate the wireless telecommunication
and power regulations of that country.
 Windows® XP in this document represents Windows® XP Professional, Windows® XP Professional x64
Edition and Windows® XP Home Edition.
 Windows Server® 2003 in this document represents Windows Server® 2003 and Windows Server® 2003
x64 Edition.
 Windows Server® 2008 in this document represents Windows Server® 2008 and Windows Server® 2008
R2.
 Windows Vista® in this document represents all editions of Windows Vista®.
 Windows® 7 in this document represents all editions of Windows® 7.
 The machine illustrations are based on MFC-9320CW.
 Not all models are available in all countries.
ii
Brother numbers
IMPORTANT
For technical and operational assistance, you must call the country where you purchased the machine.
Calls must be made from within that country.
For Customer Service
In USA
1-877-BROTHER (1-877-276-8437)
In Canada
1-877-BROTHER
In Brazil
helpline@brother.com.br
In Europe
Visit http://www.brother.com/ for contact information on your local Brother office.
 Service center locator (USA)
For the location of a Brother authorized service center, call 1-877-BROTHER (1-877-276-8437).
 Service center locations (Canada)
For the location of a Brother authorized service center, call 1-877-BROTHER.
If you have any comments or suggestions, please write to us at:
In USA
Customer Support
Brother International Corporation
100 Somerset Corporate Boulevard
Bridgewater NJ 08807-0911
In Canada
Brother International Corporation (Canada), Ltd.
Marketing Dept.
1 Hôtel de Ville
Dollard des Ormeaux, QC
H9B 3H6
Canada
In Brazil
Brother International Corporation do Brasil Ltda.
Av. Paulista, 854 - 15 and. - Ed. Top Center
CEP: 01310-100 - São Paulo - SP - Brasil
In Europe
European Product & Service Support
1 Tame Street
Audenshaw
Manchester, M34 5JE, UK
iii
Internet address
Brother Global Web Site: http://www.brother.com/
For Frequently Asked Questions (FAQs), Product Support, Driver Updates and Utilities:
http://solutions.brother.com/
Ordering accessories and supplies
In USA:
1-877-552-MALL (1-877-552-6255)
1-800-947-1445 (fax)
http://www.brothermall.com/
In Canada:
1-877-BROTHER
http://www.brother.ca/
iv
Table of Contents
1
Introduction
1
Overview....................................................................................................................................................1
Network features........................................................................................................................................2
Network printing...................................................................................................................................2
Network scanning ................................................................................................................................2
Network PC Fax (For MFC-9120CN and MFC-9320CW) ...................................................................2
Fax to Server (For MFC-9120CN and MFC-9320CW: available as a download)................................2
Management utilities............................................................................................................................2
Internet fax/scan to E-mail server
(For MFC-9120CN and MFC-9320CW: available as a download) ..................................................4
Store Print Log to Network ..................................................................................................................4
Types of network connections ...................................................................................................................5
Wired network connection example.....................................................................................................5
Wireless network connection examples (For MFC-9320CW only) ......................................................7
Protocols....................................................................................................................................................8
TCP/IP protocols and functionalities....................................................................................................8
Other protocol....................................................................................................................................11
2
Configuring your machine for a network
12
Overview..................................................................................................................................................12
IP addresses, subnet masks and gateways ............................................................................................12
IP address .........................................................................................................................................12
Subnet mask......................................................................................................................................13
Gateway (and router).........................................................................................................................14
Step by step chart....................................................................................................................................14
Setting the IP address and subnet mask .................................................................................................15
Using the BRAdmin Light utility to configure your machine as a network printer ..............................15
Using the control panel to configure your machine for a network......................................................17
Using other methods to configure your machine for a network .........................................................17
Changing the print server settings ...........................................................................................................18
Using the BRAdmin Light utility to change the print server settings ..................................................18
Using the BRAdmin Professional 3 utility to change print server settings (Windows®) .....................18
Using the control panel to change the print server settings...............................................................19
Using Web Based Management (web browser) to change the print/scan server settings ................19
Using Remote Setup to change the print server settings
(Not available for Windows Server® 2003/2008) (For MFC-9120CN and MFC-9320CW)............20
Using other methods to change print server settings ........................................................................20
v
3
Configuring your machine for a wireless network (For MFC-9320CW)
21
Overview..................................................................................................................................................21
Wireless network terms and concepts .....................................................................................................22
SSID (Service Set Identifier) and channels .......................................................................................22
Authentication and encryption ...........................................................................................................22
Step by step chart for wireless network configuration ............................................................................25
For Infrastructure mode .....................................................................................................................25
For Ad-hoc mode...............................................................................................................................26
Confirm your network environment..........................................................................................................27
Connected to a computer with an access point in the network (Infrastructure mode).......................27
Connected to a wireless capable computer without an access point in the network (Ad-hoc mode)........27
Confirm your wireless network setup method..........................................................................................28
Configuration using the Brother installer application on the CD-ROM to configure your wireless
network machine (Recommended)................................................................................................28
Configuration using the SES/WPS or AOSS control panel menu
(Automatic Wireless mode) (Infrastructure mode only) .................................................................29
Configuration using the machine’s control panel Setup Wizard to configure your machine
for a wireless network....................................................................................................................29
Configuration using the PIN Method of Wi-Fi Protected Setup (Infrastructure mode only) ...............30
Configure your machine for a wireless network.......................................................................................31
Using the Brother installer application on the CD-ROM to configure your machine for a
wireless network ............................................................................................................................31
Using the SES/WPS or AOSS control panel menu to configure your machine for a
wireless network (Automatic Wireless mode)................................................................................31
Using the Setup Wizard from the control panel .................................................................................34
Using the PIN Method of Wi-Fi Protected Setup ...............................................................................38
4
Wireless configuration for Windows® using the Brother installer application
(For MFC-9320CW)
40
Configuration in Infrastructure mode .......................................................................................................40
Before configuring the wireless settings ............................................................................................40
Configure the wireless settings..........................................................................................................41
5
Wireless configuration for Macintosh using the Brother installer application
(MFC-9320CW only)
42
Configuration in Infrastructure mode .......................................................................................................42
Before configuring the wireless settings ............................................................................................42
Configure the wireless settings..........................................................................................................44
vi
6
Control panel setup
52
Network menu..........................................................................................................................................52
TCP/IP ...............................................................................................................................................52
Ethernet (wired network only)............................................................................................................60
Setup Wizard (MFC-9320CW wireless network only) .......................................................................60
SES/WPS/AOSS (MFC-9320CW wireless network only)..................................................................60
WPS w/PIN Code (MFC-9320CW wireless network only).................................................................61
WLAN Status (MFC-9320CW wireless network only) .......................................................................61
Set to Default (MFC-9320CW only)...................................................................................................63
Wired Enable (MFC-9320CW wired network only)............................................................................63
WLAN Enable (MFC-9320CW wireless network only) ......................................................................64
E-mail / IFAX (For MFC-9120CN and MFC-9320CW: available as a download) ..............................64
How to set a new default for Scan to E-mail (E-mail server)
(For MFC-9120CN and MFC-9320CW: available as a download) ................................................74
How to set a new default for Scan to FTP (For MFC-9120CN and MFC-9320CW) ..........................75
How to set a new default for Scan to Network (For MFC-9120CN and MFC-9320CW) ...................76
Fax to Server (For MFC-9120CN and MFC-9320CW: available as a download)..............................77
Time Zone (For MFC-9120CN and MFC-9320CW) .........................................................................78
Restoring the network settings to factory default.....................................................................................79
Printing the Network Configuration List ...................................................................................................80
7
Driver Deployment Wizard (Windows® only)
81
Overview..................................................................................................................................................81
Connection methods................................................................................................................................81
Peer-to-peer ......................................................................................................................................81
Network Shared.................................................................................................................................82
How to install the Driver Deployment Wizard software............................................................................83
Using the Driver Deployment Wizard software ........................................................................................84
8
Network printing from Windows®: basic TCP/IP Peer-to-Peer printing
87
Overview..................................................................................................................................................87
Configuring the standard TCP/IP port......................................................................................................88
Printer driver not yet installed ............................................................................................................88
Printer driver already installed ...........................................................................................................88
Other sources of information ...................................................................................................................89
9
Internet printing for Windows®
90
Overview..................................................................................................................................................90
IPP printing for Windows® 2000/XP, Windows Vista®, Windows® 7 and Windows Server® 2003/2008.........91
For Windows Vista®, Windows® 7 and Windows Server® 2008 .......................................................91
For Windows® 2000/XP and Windows Server® 2003 .......................................................................93
Specifying a different URL.................................................................................................................95
Other sources of information ...................................................................................................................95
vii
10
Network printing from Macintosh using the BR-Script 3 driver
96
Overview..................................................................................................................................................96
How to choose the BR-Script 3 printer driver (TCP/IP) ...........................................................................96
For Mac OS X 10.3.9 to 10.4.x users ................................................................................................96
For Mac OS X 10.5.x to 10.6.x ..........................................................................................................99
Other sources of information .................................................................................................................100
11
Web Based Management
101
Overview................................................................................................................................................101
How to configure the machine settings using Web Based Management (web browser).......................102
Password information ............................................................................................................................103
Secure Function Lock 2.0 (For MFC-9320CW) .....................................................................................104
How to configure the Secure Function Lock 2.0 settings using Web Based Management
(web browser) (For MFC-9320CW) .............................................................................................105
Changing the Scan to FTP configuration using a web browser
(For MFC-9120CN and MFC-9320CW).............................................................................................108
Changing the Scan to Network configuration using a web browser
(For MFC-9120CN and MFC-9320CW)..............................................................................................110
12
Internet fax and Scan to E-mail
(E-mail server) (For MFC-9120CN and MFC-9320CW)
112
Internet fax overview..............................................................................................................................112
Getting connected ...........................................................................................................................112
Control panel key functions .............................................................................................................113
Sending an Internet fax ...................................................................................................................113
Manually entering text .....................................................................................................................114
Receiving E-mail or Internet fax ......................................................................................................114
Receiving an Internet fax to your computer.....................................................................................115
Forwarding received E-mail and fax messages...............................................................................115
Relay broadcasting..........................................................................................................................115
TX Verification Mail..........................................................................................................................117
Setup Mail TX ..................................................................................................................................118
Setup Mail RX..................................................................................................................................118
Error mail .........................................................................................................................................118
Important information on Internet fax...............................................................................................119
Scan to E-mail (E-mail server) overview................................................................................................120
How to operate Scan to E-mail (E-mail server) ...............................................................................120
Using One Touch or Speed Dial number.........................................................................................121
viii
13
Security features
122
Overview................................................................................................................................................122
Security terms..................................................................................................................................122
Security protocols ............................................................................................................................123
Security methods for E-mail notification ..........................................................................................123
Configuring the protocol settings ...........................................................................................................124
Managing your network printer securely................................................................................................125
Secure Management using Web Based Management (web browser) ............................................125
Secure Management using BRAdmin Professional 3 (for Windows®) ............................................127
Printing documents securely using IPPS...............................................................................................128
Specifying a different URL...............................................................................................................128
Using E-mail notification with user authentication .................................................................................129
Creating and installing a certificate........................................................................................................131
Creating and installing a self-signed certificate ...............................................................................132
Creating CSR and installing a certificate .........................................................................................144
Import and export the certificate and private key.............................................................................145
14
Troubleshooting
146
Overview................................................................................................................................................146
General problems ..................................................................................................................................147
Network print software installation problems .........................................................................................149
Printing problems...................................................................................................................................152
Scanning and PC Fax problems ............................................................................................................153
Wireless network troubleshooting (For MFC-9320CW) .........................................................................156
Wireless connection problem ..........................................................................................................156
Protocol-specific troubleshooting...........................................................................................................157
Windows® 2000/XP, Windows Vista®, Windows® 7 and Windows Server® 2003/2008 IPP
troubleshooting ............................................................................................................................157
Web Based Management (web browser) troubleshooting (TCP/IP)................................................157
A
Appendix A
158
Using services .......................................................................................................................................158
Other ways to set the IP address (for advanced users and administrators) ..........................................159
Using DHCP to configure the IP address ........................................................................................159
Using BOOTP to configure the IP address......................................................................................159
Using RARP to configure the IP address ........................................................................................160
Using APIPA to configure the IP address........................................................................................160
Using ARP to configure the IP address ...........................................................................................160
Using the TELNET console to configure the IP address .................................................................162
Using the Brother Web BRAdmin server software for IIS to configure the IP address....................163
Installation when using web services (For Windows Vista® and Windows® 7 users)............................164
Installation when using a Network Print Queue or Share (printer driver only) .......................................165
ix
B
Appendix B
166
Print server specifications......................................................................................................................166
Ethernet wired network....................................................................................................................166
Ethernet wireless network ..............................................................................................................167
Function table and default factory settings ............................................................................................169
MFC-9010CN and DCP-9010CN ....................................................................................................169
MFC-9120CN ..................................................................................................................................170
MFC-9120CN (Internet Fax and Scan to E-mail Server available as a download) .........................173
MFC-9320CW..................................................................................................................................177
MFC-9320CW (Internet Fax and Scan to E-mail Server available as a download).........................182
Entering Text .........................................................................................................................................189
C
Index
191
x
1
Introduction
1
1
Overview
1
Your Brother machine can be shared on a 10/100 Mb wired or IEEE 802.11b/802.11g wireless Ethernet
network using the internal network print server. The print server supports various functions and methods of
connection depending on the operating system you are running on a network supporting TCP/IP. These
functions include printing, scanning, PC Fax send, PC Fax receive, Remote Setup and Status Monitor. The
following chart shows what network features and connections are supported by each operating system.
Operating Systems
Windows® 2000/XP
Windows Vista®
Windows Server®
2003/2008
Mac OS X 10.3.9 or
greater
Windows® 7
10/100BASE-TX wired Ethernet
(TCP/IP)
r
r
r
IEEE 802.11b/g wireless
Ethernet (TCP/IP) 1
r
r
r
Printing
r
r
r
BRAdmin Light
r
r
r
BRAdmin Professional 3 2
r
r
Web BRAdmin 2
r
r
BRPrint Auditor 3
r
r
Web Based Management
(web browser)
r
r
Internet Printing (IPP)
r
r
Scanning
r
r
PC Fax Send 4
r
r
PC Pax Receive 4
r
Remote Setup 4
r
r
Status Monitor
r
r
Driver Deployment Wizard
r
r
r
1
Only the MFC-9320CW has IEEE 802.11b/802.11g wireless Ethernet (TCP/IP) available.
2
BRAdmin Professional and Web BRAdmin are available as a download from http://solutions.brother.com/.
3
Available when using BRAdmin Professional 3 or Web BRAdmin with devices that are connected to your client PC via the USB interface.
4
Not available for MFC-9010CN and DCP-9010CN
To use the Brother machine through a network, you need to configure the print server, and set up the
computers you use.
1
Introduction
Network features
1
1
Your Brother machine has the following basic network features.
Network printing
1
The print server provides printing services for Windows® 2000/XP, Windows Vista®, Windows® 7 and
Windows Server® 2003/2008 supporting the TCP/IP protocols and Macintosh (Mac OS X 10.3.9 or greater)
supporting TCP/IP.
Network scanning
1
You can scan documents over the network to your computer (See Network Scanning in the Software User’s
Guide).
Network PC Fax (For MFC-9120CN and MFC-9320CW)
1
You can directly send a file from your computer as a PC Fax over your network (See Brother PC-FAX
Software for Windows® and Sending a fax for Macintosh in the Software User’s Guide for a complete
description). Windows® users can also PC Fax receive (See PC-FAX receiving in the Software User’s Guide).
Fax to Server (For MFC-9120CN and MFC-9320CW: available as a download)
1
The Fax to Server feature allows the machine to scan documents and send them via a separate fax server.
Unlike Internet fax or I-Fax, the Fax to Server feature utilizes a server to send the documents as fax data over
phone or T-1 lines.
Note
In order to use this function, please download the necessary software from the download page in the
Brother Solution Center. (http://solutions.brother.com/)
Management utilities
1
BRAdmin Light
1
BRAdmin Light is a utility for initial setup of Brother network connected devices. This utility can search for
Brother products on your network, view the status and configure basic network settings, such as IP address.
The BRAdmin Light utility is available for Windows® 2000/XP, Windows Vista®, Windows® 7 and Windows
Server® 2003/2008 and Mac OS X 10.3.9 or greater computers. For installing BRAdmin Light on Windows®,
please see the Quick Setup Guide provided with the machine. For Macintosh users, BRAdmin Light will be
installed automatically when you install the printer driver. If you have already installed the printer driver, you
don’t have to install it again.
For more information on BRAdmin Light, visit us at http://solutions.brother.com/.
2
Introduction
BRAdmin Professional 3 (Windows®)
1
1
BRAdmin Professional 3 is a utility for more advanced management of network connected Brother devices.
This utility can search for Brother products on your network and view the device status from an easy to read
explorer style window that changes color identifying the status of each device. You can configure network
and device settings along with the ability to update device firmware from a Windows® computer on your LAN.
BRAdmin Professional 3 can also log activity of Brother devices on your network and export the log data in
an HTML, CSV, TXT or SQL format.
For users who want to monitor locally connected printers, install the BRPrint Auditor software on the client
PC. This utility allows you to monitor printers that are connected to a client PC via the USB interface from
BRAdmin Professional 3.
For more information and to download the software, visit us at http://solutions.brother.com/.
Web BRAdmin (Windows®)
1
Web BRAdmin is a utility for managing network connected Brother devices. This utility can search for Brother
products on your network, view the status and configure the network settings.
Unlike BRAdmin Professional 3, which is designed for Windows® only, Web BRAdmin is a server based utility
that can be accessed from any client PC with a web browser that supports JRE (Java Runtime Environment).
By installing the Web BRAdmin server utility on a computer running IIS 1, administrators can connect to the
Web BRAdmin server using a web browser, which then communicates with the device itself.
For more information and to download the software, visit us at http://solutions.brother.com/.
1
Internet Information Server 4.0 or Internet Information Services 5.0/5.1/6.0/7.0
BRPrint Auditor (Windows®)
1
The BRPrint Auditor software brings the monitoring power of Brother network management tools to locally
connected machines. This utility allows a client computer to collect usage and status information from a MFC
or DCP connected via the USB interface. The BRPrint Auditor can then pass this information to another
computer on the network running BRAdmin Professional 3 or Web BRAdmin 1.45 or greater. This allows the
administrator to check items such as page counts, toner and drum status and the firmware version. In addition
to reporting to Brother network management applications this utility can E-mail the usage and status
information directly to a predefined E-mail address in a CSV or XML file format (SMTP Mail support required).
The BRPrint Auditor utility also supports E-mail notification for reporting warning and error conditions.
Web Based Management (web browser)
1
The Web Based Management allows you to monitor Brother printer’s status or change some of its
configuration settings using a web browser.
Note
We recommend Microsoft® Internet Explorer® 6.0 (or greater) or Firefox 1.0 (or greater) for Windows® and
Safari 1.3 (or greater) for Macintosh. Please also make sure that JavaScript and Cookies are always
enabled in whichever browser you use. If a different web browser is used, make sure it is compatible with
HTTP 1.0 and HTTP 1.1.
3
Introduction
Remote Setup
1
1
The Remote Setup software allows you to configure network settings from a Windows® or Macintosh
(Mac OS X 10.3.9 or greater) computer. (See Remote Setup in the Software User’s Guide.)
Internet fax/scan to E-mail server
(For MFC-9120CN and MFC-9320CW: available as a download)
1
The Brother machine can be assigned an E-mail address allowing you to send, receive or forward documents
over a Local Area Network or the Internet to PC’s or other Internet fax machines. Before using this function,
you have to configure the necessary machine settings by using the machine’s control panel. (For details, see
Internet fax and Scan to E-mail (E-mail server) (For MFC-9120CN and MFC-9320CW) on page 112.) You
can also configure these settings using Web Based Management (web browser) see Web Based
Management on page 101, or Remote Setup see Using Remote Setup to change the print server settings
(Not available for Windows Server® 2003/2008) (For MFC-9120CN and MFC-9320CW) on page 20.)
Note
In order to use this function, please download the necessary software from the download page in the
Brother Solutions Center. (http://solutions.brother.com/)
Store Print Log to Network
1
The Store Print Log to Network feature allows you to save the print log file from your Brother machine to a
network server using the CIFS. You can record the ID, Type of print job, User name, Date, Time, the number
of printed pages and color pages for every print job. You can configure this setting using Web Based
Management (web browser). For more information of this function, please download the
Store Print Log to Network manual from the download page on the Brother Solutions Center.
(http://solutions.brother.com/)
4
Introduction
Types of network connections
1
1
Wired network connection example
1
Generally there are two types of network connections: Peer-to-Peer and Network Shared environment.
Peer-to-Peer printing using TCP/IP
1
In a Peer-to-Peer environment, each computer directly sends and receives data to each device. There is no
central server controlling file access or printer sharing.
Windows
R
Windows
TCP/IP
R
Windows
R
TCP/IP
1 Router
2 Network printer (your machine)
 In a smaller network of 2 or 3 computers, we recommend the Peer-to-Peer printing method as it is easier
to configure than the Network Shared printing method described on the following page. See Network
Shared printing on page 6.
 Each computer must use the TCP/IP Protocol.
 The Brother machine needs to have an appropriate IP address configuration.
 If you are using routers, the Gateway address must be configured on the computers and the Brother
machine.
 The Brother machine can also communicate with Macintosh (TCP/IP compatible operating systems).
5
Introduction
Network Shared printing
1
In a Network Shared environment, each computer sends data via a centrally controlled computer. This type
of computer is often called a “Server” or a “Print Server”. Its job is to control the printing of all print jobs.
1 Client computer
2 Also known as “Server” or “Print server”
3 TCP/IP or USB (where available)
4 Printer (your machine)
 In a larger network, we recommend a Network Shared printing environment.
 The “server” or the “print server” must use the TCP/IP print protocol.
 The Brother machine needs to have an appropriate IP address configuration unless the machine is
connected via the USB interface at the server.
6
1
Introduction
Wireless network connection examples (For MFC-9320CW only)
1
1
Connected to a computer with an access point on the network (Infrastructure mode)
1
This type of network has a central access point at the heart of the network. The access point can also act as
a bridge or a gateway to a wired network. When the Brother wireless machine (your machine) is part of this
network, it receives all print jobs via an access point.
1 Access point
2 Wireless network printer (your machine)
3 Wireless capable computer communicating with the access point
4 Wired computer which is not wireless capable connected to the access point with the Ethernet
cable
Connected to a wireless capable computer without an access point on the network
(Ad-hoc mode)
1
This type of network does not have a central access point. Each wireless client communicates directly with
each other. When the Brother wireless machine (your machine) is part of this network, it receives all print jobs
directly from the computer sending the print data.
1 Wireless network printer (your machine)
2 Wireless capable computer
7
Introduction
Protocols
1
1
TCP/IP protocols and functionalities
1
Protocols are the standardized sets of rules for transmitting data on a network. Protocols allow users to gain
access to network connected resources.
The print server used on this Brother product supports the TCP/IP (Transmission Control Protocol/Internet
Protocol) protocol.
TCP/IP is the most popular set of protocols used for communication such as Internet and E-mail. This protocol
can be used in almost all operating systems such as Windows®, Windows Server®, Macintosh and Linux®.
The following TCP/IP protocols are available on this Brother product.
Note
• You can configure the protocol settings by using the HTTP interface (web browser).
See How to configure the machine settings using Web Based Management (web browser) on page 102.
• For information about supported security protocols, see Security protocols on page 123.
DHCP/BOOTP/RARP
1
By using the DHCP/BOOTP/RARP protocols, the IP address can be automatically configured.
Note
To use the DHCP/BOOTP/RARP protocols, please contact your network administrator.
APIPA
1
If you do not assign an IP address manually (using the control panel of the machine or the BRAdmin software)
or automatically (using a DHCP/BOOTP/RARP server), the Automatic Private IP Addressing (APIPA)
protocol will automatically assign an IP address from the range 169.254.1.0 to 169.254.254.255.
ARP
1
Address Resolution Protocol performs mapping of an IP address to MAC address in a TCP/IP network.
DNS client
1
The Brother print server supports the Domain Name System (DNS) client function. This function allows the
print server to communicate with other devices by using its DNS name.
NetBIOS name resolution
1
Network Basic Input/Output System name resolution enables you to obtain the IP address of the other device
using its NetBIOS name during the network connection.
8
Introduction
WINS
1
1
Windows Internet Name Service is an information providing service for the NetBIOS name resolution by
consolidating an IP address and a NetBIOS name that is in the local network.
LPR/LPD
1
Commonly used printing protocols on a TCP/IP network.
SMTP client
1
Simple Mail Transfer Protocol (SMTP) client is used to send E-mails via the Internet or Intranet.
Custom Raw Port (Default is Port9100)
1
Another commonly used printing protocol on a TCP/IP network. It enables interactive data transmission.
IPP
1
The Internet Printing Protocol (IPP Version 1.0) allows you to print documents directly to any accessible
printer via the internet.
Note
For the IPPS protocol, see Security protocols on page 123.
mDNS
1
mDNS allows the Brother print server to automatically configure itself to work in a Mac OS X Simple Network
Configured system. (Mac OS X 10.3.9 or greater.)
TELNET
1
The Brother print server supports TELNET server for command line configuration.
SNMP
1
The Simple Network Management Protocol (SNMP) is used to manage network devices including computers,
routers and Brother network ready machines. The Brother print server supports SNMPv1, SNMPv2c and
SNMPv3.
Note
For the SNMPv3 protocol, see Security protocols on page 123.
LLMNR
1
The Link-Local Multicast Name Resolution protocol (LLMNR) resolves the names of neighboring computers,
if the network does not have a Domain Name System (DNS) server. The LLMNR Responder function works
in both the IPv4 or IPv6 environment when using a computer that has the LLMNR Sender function such as
Windows Vista® and Windows® 7.
9
Introduction
Web services
1
1
The Web Services protocol enables Windows Vista® and Windows® 7 users to install the Brother printer
driver by right clicking the machine icon from the Start / Network selection.
See Installation when using web services (For Windows Vista® and Windows® 7 users) on page 164.
The Web Services also lets you check the current status of the machine from your computer.
Web server (HTTP)
1
The Brother print server is equipped with a built in web server that allows you to monitor its status or change
some of its configuration settings using a web browser.
Note
• We recommend Microsoft® Internet Explorer® 6.0 (or greater) or Firefox 1.0 (or greater) for Windows® and
Safari 1.3 (or greater) for Macintosh. Please also make sure that JavaScript and Cookies are always
enabled in whichever browser you use. If a different web browser is used, make sure it is compatible with
HTTP 1.0 and HTTP 1.1.
• For the HTTPS protocol, see Security protocols on page 123.
FTP
1
The File Transfer Protocol (FTP) allows the Brother machine to scan black and white or color documents
directly to an FTP server located locally on your network or on the internet.
SNTP
1
The Simple Network Time Protocol is used to synchronize computer clocks on a TCP/IP network. You can
configure the SNTP settings using Web Based Management (web browser). (For the details, see Web Based
Management on page 101.)
CIFS
1
The Common Internet File System is the standard way that computer users share files and printers in
Windows®.
IPv6
1
This machine is compatible with IPv6, the next generation internet protocol. For more information on the IPv6
protocol, visit http://solutions.brother.com/.
10
Introduction
Other protocol
1
1
LLTD
1
The Link Layer Topology Discovery protocol (LLTD) lets you locate the Brother machine easily on the
Windows Vista® and Windows® 7 network map. Your Brother machine will be shown with a distinctive icon
and the node name. The default setting for this protocol is Off. You can activate LLTD using the BRAdmin
Professional 3 utility software. Visit the download page for your model at http://solutions.brother.com/ to
download BRAdmin Professional 3.
11
2
Configuring your machine for a network
2
Overview
2
2
Before using your Brother machine in a network environment, you must install the Brother software and also
configure the appropriate TCP/IP network settings on the machine itself. In this chapter, you will learn the
basic steps required to print over the network using TCP/IP protocol.
We recommend that you use the Brother installer on the Brother CD-ROM to install the Brother software as
this will guide you through the software and network installation. Please follow the instructions in the supplied
Quick Setup Guide.
Note
If you do not wish to, or are unable to use the Brother installer or any of Brother’s software tools, you can
also use the machine’s control panel to change network settings.
For more information, see Control panel setup on page 52.
IP addresses, subnet masks and gateways
2
To use the machine in a networked TCP/IP environment, you need to configure the IP address and subnet
mask. The IP address you assign to the print server must be on the same logical network as your host
computers. If it is not, you must properly configure the subnet mask and the gateway address.
IP address
2
An IP address is a series of numbers that identifies each computer connected to a network. An IP address
consists of four numbers separated by dots. Each number is between 0 and 255.
 Example: In a small network, you would normally change the final number.
• 192.168.1.1
• 192.168.1.2
• 192.168.1.3
12
Configuring your machine for a network
How the IP address is assigned to your print server:
2
If you have a DHCP/BOOTP/RARP server in your network (typically a UNIX®/Linux or Windows® 2000/XP,
Windows Vista®, Windows® 7 or Windows Server® 2003/2008 network) the print server will automatically
obtain its IP address from the DHCP server and register its name with any RFC 1001 and 1002-compliant
dynamic name services.
2
Note
On smaller networks, the DHCP server may also be the router.
For more information on DHCP, BOOTP and RARP, see:
Using DHCP to configure the IP address on page 159.
Using BOOTP to configure the IP address on page 159.
Using RARP to configure the IP address on page 160.
If you do not have a DHCP/BOOTP/RARP server, the Automatic Private IP Addressing (APIPA) protocol will
automatically assign an IP address from the range 169.254.1.0 to 169.254.254.255. For more information on
APIPA, see Using APIPA to configure the IP address on page 160.
Subnet mask
2
Subnet masks restrict network communication.
 Example: Computer 1 can talk to Computer 2
• Computer 1
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.000
• Computer 2
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.000
Note
0 denotes that there is no limit to communication at this part of the address.
In the above example, we can communicate with anything that has an IP address that begins with
192.168.1.xx. (Where xx are numbers between 0 and 255.)
13
Configuring your machine for a network
Gateway (and router)
2
A gateway is a network point that acts as an entrance to another network and sends data transmitted via the
network to an exact destination. The router knows where to direct data that arrives at the gateway. If a
destination is located on an external network, the router transmits data to the external network. If your network
communicates with other networks, you may need to configure the Gateway IP address. If you do not know
the Gateway IP address then contact your Network Administrator.
Step by step chart
a
2
Configure the TCP/IP settings.
 Configure the IP address
i
See page 15
 Configure the subnet mask
i
See page 15
 Configure the gateway
i
See page 15
 Using the BRAdmin Light utility
i
See page 18
 Using the BRAdmin Professional 3 utility
i
See page 18
 Using the control panel
i
See page 19
 Using the Web Based Management (web browser)
i
See page 19
 Using the Remote Setup
i
See page 20
 Using other methods
i
See page 20
b
2
Change the print server settings.
14
Configuring your machine for a network
Setting the IP address and subnet mask
2
Using the BRAdmin Light utility to configure your machine as a network printer
2
BRAdmin Light
2
The BRAdmin Light utility is designed for initial setup of the Brother network connected devices. It also can
search for Brother products in a TCP/IP environment, view the status and configure basic network settings,
such as IP address. The BRAdmin Light utility is available for Windows® 2000/XP, Windows Vista®,
Windows® 7, Windows Server® 2003/2008 and Mac OS X 10.3.9 or greater.
How to configure your machine using the BRAdmin Light utility
2
Note
• Please use the BRAdmin Light utility that was supplied on the CD-ROM of your Brother product. You can
also download the latest Brother BRAdmin Light utility from http://solutions.brother.com/.
• If you require more advanced printer management, use the latest version of BRAdmin Professional 3 utility
that is available as a download from http://solutions.brother.com/. This utility is only available for
Windows® users.
• If you are using a firewall function of anti-spyware or antivirus applications, temporarily disable them. Once
you are sure that you can print, configure the software settings following the instructions.
• Node name: Node name appears in the current BRAdmin Light window. The default node name of the
print server in the machine is “BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a wireless
network. (“xxxxxxxxxxxx” is your machine’s MAC Address / Ethernet Address.)
• The default password for Brother print servers is “access”.
a
Start the BRAdmin Light utility.
 For Windows®
Click Start / All Programs 1 / Brother / BRAdmin Light / BRAdmin Light.
1
Programs for Windows® 2000 users
 For Macintosh
Double-click Mac OS X or Macintosh HD (Startup Disk) / Library / Printers / Brother / Utilities /
BRAdmin Light.jar file.
b
BRAdmin Light will search for new devices automatically.
15
2
Configuring your machine for a network
c
Double-click the unconfigured device.
Windows®
Macintosh
2
Note
• If the print server is set to its factory default settings (if you do not use a DHCP/BOOTP/RARP server), the
device will appear as Unconfigured in the BRAdmin Light utility screen.
• You can find the node name and MAC Address (Ethernet Address) by printing the Network Configuration
List.
See Printing the Network Configuration List on page 80.
d
Choose STATIC from Boot Method. Enter the IP Address, Subnet Mask and Gateway (if needed) of
your print server.
Windows®
e
f
Macintosh
Click OK.
With the correctly programmed IP address, you will see the Brother print server in the device list.
16
Configuring your machine for a network
Using the control panel to configure your machine for a network
2
You can configure your machine for a network using the control panel Network menu.
See Control panel setup on page 52.
Using other methods to configure your machine for a network
2
2
You can configure your machine for a network using other methods.
See Other ways to set the IP address (for advanced users and administrators) on page 159.
17
Configuring your machine for a network
Changing the print server settings
2
Note
(MFC-9320CW only) For wireless network users, you need to configure the wireless settings to change
the print server settings.
See Configure your machine for a wireless network on page 31.
Using the BRAdmin Light utility to change the print server settings
a
2
2
Start the BRAdmin Light utility.
 For Windows®
Click Start / All Programs 1/ Brother / BRAdmin Light / BRAdmin Light.
1
Programs for Windows® 2000 users
 For Macintosh
Double-click Mac OS X or Macintosh HD (Startup Disk) / Library / Printers / Brother / Utilities /
BRAdmin Light.jar file.
b
c
d
e
Choose the print server which you want to change the settings.
Choose Network Configuration from the Control menu.
Enter a password. The default password is “access”.
You can now change the print server settings.
Note
If you want to change more advanced settings, use the BRAdmin Professional 3 utility that is available as
a download from http://solutions.brother.com/. (Windows® only)
Using the BRAdmin Professional 3 utility to change print server settings
(Windows®)
2
Note
• Please use the latest version of the BRAdmin Professional 3 utility that is available as a download from
http://solutions.brother.com/. This utility is only available for Windows® users.
• If you are using a firewall function of anti-spyware or antivirus applications, temporarily disable them. Once
you are sure that you can print, configure the software settings following the instructions.
• Node name: The Node name for each Brother device on the network appears in BRAdmin Professional 3.
The default Node name is “BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a wireless
network. (“xxxxxxxxxxxx” is your machine’s MAC Address / Ethernet Address.)
18
Configuring your machine for a network
a
Start the BRAdmin Professional utility (from Windows® 2000/XP, Windows Vista®, Windows® 7 and
Windows Server® 2003/2008), by clicking Start / All Programs 1 / Brother Administrator Utilities /
Brother BRAdmin Professional 3 / BRAdmin Professional 3.
1
b
c
d
e
Programs for Windows® 2000 users
2
Choose the print server which you want to configure.
Choose Configure Device from the Control menu.
Enter a password if you have set one. The default password is “access”.
You can now change the print server settings.
Note
• If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the
device will appear as APIPA in the BRAdmin Professional 3 utility screen.
• You can find the node name and MAC Address / Ethernet Address by printing out the Network
Configuration List. (See Printing the Network Configuration List on page 80 for information on how to print
the Network Configuration List on your print server.)
Using the control panel to change the print server settings
2
You can configure and change the print server settings using the control panel Network menu.
See Control panel setup on page 52.
Using Web Based Management (web browser) to change the print/scan server
settings
2
A standard web browser can be used to change your print server settings using the HTTP (Hyper Text
Transfer Protocol). (See How to configure the machine settings using Web Based Management (web
browser) on page 102.)
19
Configuring your machine for a network
Using Remote Setup to change the print server settings
(Not available for Windows Server® 2003/2008)
(For MFC-9120CN and MFC-9320CW)
2
2
®
Remote Setup for Windows
2
The Remote Setup application allows you to configure network settings from a Windows® application. When
you access this application, the settings on your machine will be downloaded automatically to your PC and
displayed on your PC screen. If you change the settings, you can upload them directly to the machine.
a
Click the Start button, All Programs 1, Brother, MFC-XXXX LAN (or DCP-XXXX LAN), then
Remote Setup.
1
b
c
d
Programs for Windows® 2000 users
Enter a password. The default password is “access”.
Click TCP/IP.
You can now change the print server settings.
Remote Setup for Macintosh
2
The Remote Setup application allows you to configure many MFC settings from a Macintosh application.
When you access this application, the settings on your machine will be downloaded automatically to your
Macintosh and displayed on your Macintosh screen. If you change the settings, you can upload them directly
to the machine.
a
Double click the Mac OS X or Macintosh HD (Startup Disk) icon on your desktop, Library, Printers,
Brother, then Utilities.
b
c
d
e
Double click the Remote Setup icon.
Enter a password. The default password is “access”.
Click TCP/IP.
You can now change the print server settings.
Using other methods to change print server settings
2
You can configure your network printer using other methods.
See Other ways to set the IP address (for advanced users and administrators) on page 159.
20
3
Configuring your machine for a wireless
network (For MFC-9320CW)
3
Overview
3
To connect your machine to your wireless network, you need to follow the steps in the Quick Setup Guide.
Configuration using the CD-ROM installer and a USB cable is a recommended for Windows® users. By using
this method, you can easily connect your machine to your wireless network. Macintosh users should choose
their preferred configuration method from the choices covered in the Quick Setup Guide.
Please read this chapter for additional methods on how to configure the wireless network settings. For
information on TCP/IP settings, see Setting the IP address and subnet mask on page 15. Then, in Network
printing from Windows®: basic TCP/IP Peer-to-Peer printing on page 87 or Network printing from Macintosh
using the BR-Script 3 driver on page 96, you will learn how to install the network software and drivers into the
operating system running on your computer.
Note
• To achieve optimum results with normal everyday document printing, place the Brother machine as close
to the network access point/router as possible with minimal obstructions. Large objects and walls between
the two devices as well as interference from other electronic devices can affect the data transfer speed of
your documents.
Due to these factors, wireless may not be the best method of connection for all types of documents and
applications. If you are printing large files, such as multi-page documents with mixed text and large
graphics, you may want to consider choosing wired Ethernet for a faster data transfer, or USB for the
fastest throughput speed.
• Although the Brother MFC-9320CW can be used in a both wired and wireless network, only one
connection method can be used at a time.
21
3
Configuring your machine for a wireless network (For MFC-9320CW)
Wireless network terms and concepts
3
If you want to use your machine in a wireless network you must configure the machine to match the settings
of the existing wireless network. This section provides some of the main terms and concepts of these settings,
which may be helpful when you configure your machine for a wireless network.
SSID (Service Set Identifier) and channels
3
You need to configure the SSID and a channel to specify the wireless network you want to connect to.
 SSID
Each wireless network has its own unique network name and it is technically referred to as SSID or ESSID
(Extended Service Set Identifier). The SSID is a 32-byte or less value and is assigned to the access point.
The wireless network devices you want to associate to the wireless network should match the access
point. The access point and wireless network devices regularly send wireless packets (referred to as a
beacon) which has the SSID information. When your wireless network device receives a beacon, you can
identify the wireless network that is close enough for the radio waves to reach your device.
 Channels
Wireless networks use channels. Each wireless channel is on a different frequency. There are up to
14 different channels that can be used when using a wireless network. However, in many countries the
number of channels available are restricted. (For more information, see Ethernet wireless network
on page 167.)
Authentication and encryption
3
Most wireless networks use some kind of security settings. These security settings define the authentication
(how the device identifies itself to the network) and encryption (how the data is encrypted as it is sent on the
network). If you do not correctly specify these options when you are configuring your Brother wireless
device, it will not be able to connect to the wireless network. Therefore care must be taken when
configuring these options. Please refer to the information below to see which authentication and encryption
methods your Brother wireless device supports.
Authentication methods
3
The Brother printer supports the following methods:
 Open system
Wireless devices are allowed to access the network without any authentication.
 Shared key
A secret pre-determined key is shared by all devices that will access the wireless network.
The Brother wireless machine uses the WEP key as the pre-determined key.
 WPA-PSK/WPA2-PSK
Enables a Wi-Fi Protected Access Pre-shared key (WPA-PSK/WPA2-PSK), which enables the Brother
wireless machine to associate with access points using TKIP for WPA-PSK or AES for WPA-PSK and
WPA2-PSK (WPA-Personal).
22
3
Configuring your machine for a wireless network (For MFC-9320CW)
 LEAP
Cisco LEAP (Light Extensible Authentication Protocol) has been developed by Cisco Systems, Inc. which
uses a user ID and password for authentication.
 EAP-FAST
EAP-FAST (Extensible Authentication Protocol-Flexible Authentication via Secured Tunnel) has been
developed by Cisco Systems, Inc. which uses a user ID and password for authentication, and symmetric
key algorithms to achieve a tunneled authentication process.
3
The Brother machine supports the following inner authentications:
• EAP-FAST/NONE
EAP-FAST authentication for CCXv3 networks.
• EAP-FAST/MS-CHAPv2
EAP-FAST authentication for CCXv4 networks. Uses MS-CHAPv2 for the inner authentication method.
• EAP-FAST/GTC
EAP-FAST authentication for CCXv4 networks. Uses GTC for the inner authentication method.
Encryption methods
3
Encryption is used to secure the data that is sent over the wireless network. The Brother wireless machine
supports the following encryption methods:
 None
No encryption method is used.
 WEP
By using WEP (Wired Equivalent Privacy), the data is transmitted and received with a secure key.
 TKIP
TKIP (Temporal Key Integrity Protocol) provides per-packet key mixing a message integrity check and
rekeying mechanism.
 AES
AES (Advanced Encryption Standard) is the Wi-Fi authorized strong encryption standard.
 CKIP
The original Key Integrity Protocol for LEAP by Cisco Systems, Inc.
23
Configuring your machine for a wireless network (For MFC-9320CW)
Network key
3
There are some rules for each security method:
 Open system/Shared key with WEP
This key is a 64-bit or 128-bit value that must be entered in an ASCII or hexadecimal format.
• 64 (40) bit ASCII:
3
Uses 5 text characters. e.g. “WSLAN” (this is case sensitive).
• 64 (40) bit hexadecimal:
Uses 10 digits of hexadecimal data. e.g. “71f2234aba”
• 128 (104) bit ASCII:
Uses 13 text characters. e.g. “Wirelesscomms” (this is case sensitive)
• 128 (104) bit hexadecimal:
Uses 26 digits of hexadecimal data. e.g. “71f2234ab56cd709e5412aa2ba”
 WPA-PSK/WPA2-PSK and TKIP or AES
Uses a Pre-Shared Key (PSK) that is 8 or more characters in length, up to a maximum of 63 characters.
 LEAP
Uses User ID and Password.
• User ID: Up to a maximum of 64 characters in length.
• Password: Up to a maximum of 32 characters in length.
 EAP-FAST
Uses User ID and Password.
• User ID: less than 64 characters in length.
• Password: less than 32 characters in length.
24
Configuring your machine for a wireless network (For MFC-9320CW)
Step by step chart for wireless network configuration
3
For Infrastructure mode
a
3
Confirm your network environment. See page 27.
3
 Infrastructure mode
 Ad-hoc mode
Connected to a computer with an access point
b
See page 26
Connected to a wireless capable computer without
an access point
Confirm your wireless network setup method. See page 28.
Using the Brother
installer application
(Recommended)
(Windows®)
Temporarily using a
USB cable
c
or
Using the
SES/WPS/AOSS
control panel menu
(Automatic
Wireless mode)
Using the Setup
Wizard from the
control panel
Using the PIN
Method of Wi-Fi
Protected Setup
(Macintosh)
Temporarily using a
network cable
Configure your machine for a wireless network. See page 31.
See page 40
See page 42
See page 31
See page 34
See page 38
Installing drivers and software (See the Quick Setup Guide)
Wireless configuration and installing drivers and software have been completed.
25
Configuring your machine for a wireless network (For MFC-9320CW)
For Ad-hoc mode
a
3
Confirm your network environment. See page 27.
 Ad-hoc mode
 Infrastructure mode
Connected to a wireless capable computer without
an access point
b
or
See page 25
Connected to a computer with an access point
3
Confirm your wireless network setup method. See page 28.
Using the Setup Wizard from the control panel (Recommended)
c
Configure your machine for a wireless network. See page 31.
See page 34
Installing drivers and software (See the Quick Setup Guide)
Wireless configuration and installing drivers and software have been completed.
26
Configuring your machine for a wireless network (For MFC-9320CW)
Confirm your network environment
3
Connected to a computer with an access point in the network
(Infrastructure mode)
3
3
1
4
2
3
1 Access point
2 Wireless network printer (your machine)
3 Wireless capable computer connected to the access point
4 Wired computer which is not wireless capable connected to the access point with an Ethernet
cable
Connected to a wireless capable computer without an access point in the
network (Ad-hoc mode)
3
This type of network does not have a central access point. Each wireless client communicates directly with
each other. When the Brother wireless machine (your machine) is part of this network, it receives all print jobs
directly from the computer sending the print data.
2
1
2
1 Wireless network printer (your machine)
2 Wireless capable computer
Note
We do not guarantee the wireless network connection with Windows Server® products in Ad-hoc mode.
27
Configuring your machine for a wireless network (For MFC-9320CW)
Confirm your wireless network setup method
3
There are four methods to configure your wireless network machine. The Brother installer application
(recommended), WPS/AOSS from the control panel menu, the machine’s control panel or the PIN Method of
Wi-Fi Protected Setup. The setup process will be different depending on your network environment.
3
Configuration using the Brother installer application on the CD-ROM to
configure your wireless network machine (Recommended)
3
You can use the Brother installer application on the CD-ROM we have provided with the printer. You will be
guided by the on-screen instructions until you are able to use your Brother wireless network machine. You
must know your wireless network settings before you proceed with this installation. (See Using the Brother
installer application on the CD-ROM to configure your machine for a wireless network on page 31.)
Configuration temporarily using a USB or network cable
You can temporarily use a USB cable or network cable to configure your Brother machine for your wireless
network.
USB method (For Windows®)
 You can remotely configure the machine from a computer that is also on the network using a USB cable
(A) 1.
A
1
You can configure the wireless settings of the machine using a USB cable temporarily connected to a wired or wireless computer.
28
Configuring your machine for a wireless network (For MFC-9320CW)
Ethernet cable method (For Macintosh)
 If there is an Ethernet Hub or Router on the same network as the WLAN access point (A), you can
temporarily connect the Hub or Router to the machine using a network cable (B). You can then remotely
configure the machine from a computer on the network.
A
3
B
Configuration using the SES/WPS or AOSS control panel menu
(Automatic Wireless mode) (Infrastructure mode only)
3
If your wireless access point (A) supports either SecureEasySetup, Wi-Fi Protected Setup (PBC 1) or
AOSS™, you can configure the machine without knowing your wireless network settings. (See Using the
SES/WPS or AOSS control panel menu to configure your machine for a wireless network (Automatic Wireless
mode) on page 31.)
A
1
Push Button Configuration
Configuration using the machine’s control panel Setup Wizard to configure
your machine for a wireless network
3
You can use the machine’s control panel to configure your wireless network settings. By using the control
panel Setup Wizard function, you can easily connect your Brother machine to your wireless network. You
must know your wireless network settings before you proceed with this installation. (See Using the
Setup Wizard from the control panel on page 34.)
29
Configuring your machine for a wireless network (For MFC-9320CW)
Configuration using the PIN Method of Wi-Fi Protected Setup
(Infrastructure mode only)
3
If your wireless access point (A) supports Wi-Fi Protected Setup, you can also configure using the
PIN Method of Wi-Fi Protected Setup. (See Using the PIN Method of Wi-Fi Protected Setup on page 38.)
 Connection when the wireless access point/router (A) doubles as a Registrar 1.
3
A
 Connection when another device (C), such as a computer is used as a Registrar 1.
A
C
1
The Registrar is a device that manages the wireless LAN.
30
Configuring your machine for a wireless network (For MFC-9320CW)
Configure your machine for a wireless network
3
IMPORTANT
• If you are going to connect your Brother machine to your network, we recommend that you contact your
system administrator prior to installation. You must know your wireless network settings before you
proceed with this installation.
• If you have previously configured the wireless settings of the machine, you must reset the network LAN
settings before you can configure the wireless settings again. Press Menu, 7, 0 for Network Reset,
press 1 for Reset and then choose 1 for Yes to accept the change. The machine will restart automatically.
Using the Brother installer application on the CD-ROM to configure your
machine for a wireless network
3
For installation, see Wireless configuration for Windows® using the Brother installer application (For
MFC-9320CW) in Chapter 4 and Wireless configuration for Macintosh using the Brother installer application
(MFC-9320CW only) in Chapter 5.
Using the SES/WPS or AOSS control panel menu to configure your machine for
a wireless network (Automatic Wireless mode)
3
If your wireless access point/router supports either SecureEasySetup, Wi-Fi Protected Setup (PBC 1) or
AOSS™, you can configure the machine easily without knowing your wireless network settings. Your Brother
machine has the SES/WPS/AOSS menu on the control panel. This feature automatically detects which mode
your access point uses, SecureEasySetup, Wi-Fi Protected Setup or AOSS™. By pushing a button on the
wireless access point/router and the machine, you can setup the wireless network and security settings. See
the user’s guide for your wireless access point/router for instructions on how to access one-push mode.
1
Push Button Configuration
Note
Routers or access points that support SecureEasySetup, Wi-Fi Protected Setup or AOSS™ have the
symbols shown below.
a
Plug the machine’s power cord into the AC power outlet. Turn on the machine’s power switch.
31
3
Configuring your machine for a wireless network (For MFC-9320CW)
b
Press Menu, 7, 2, 7. Using a or b, choose On and press OK.
Press Stop/Exit.
WLAN Enable
On
c
Press Menu, 7, 2, 3 for SES/WPS/AOSS.
This feature will automatically detect which mode (SecureEasySetup, Wi-Fi Protected Setup or AOSS™)
your access point uses to configure your machine.
WLAN
3.SES/WPS/AOSS
Note
If your wireless access point supports Wi-Fi Protected Setup (PIN Method) and you want to configure your
machine using the PIN (Personal Identification Number) Method, see Using the PIN Method of Wi-Fi
Protected Setup on page 38.
d
The machine will search for an access point that supports SecureEasySetup, Wi-Fi Protected Setup or
AOSS™ for 2 minutes.
Setting WLAN
e
Put your access point in the SecureEasySetup mode, Wi-Fi Protected Setup mode or AOSS™ mode,
depending on what is supported by your access point. Please refer to the instruction manual that came
with your access point. You will see Connecting AOSS, Connecting SES or Connecting WPS on
the LCD while the machine searches for your access point.
f
If the LCD shows Connected, the machine has successfully connected to your access point/router. You
can now use your machine in a wireless network.
If the LCD shows Connection Error, a session overlap has been detected. The machine has
detected more than one access point/router on your network with the SecureEasySetup mode, the
Wi-Fi Protected Setup mode or AOSS™ mode enabled. Make sure that only one access point/router has
the SecureEasySetup mode, the Wi-Fi Protected Setup mode or the AOSS™ mode enabled and try
starting from c again.
If the LCD shows No Access Point, the machine has not detected your access point/router on your
network with the SecureEasySetup mode, the Wi-Fi Protected Setup mode or AOSS™ mode enabled.
Move the machine closer to your access point/router and try starting from c again.
If the LCD shows Connection Fail, the machine has not successfully connected to your access
point/router. Try starting from c again. If the same message is indicated again, reset the machine back
to the default factory settings and try again. (For resetting, see Restoring the network settings to factory
default on page 79.)
32
3
Configuring your machine for a wireless network (For MFC-9320CW)
LCD messages when using the SES/WPS/AOSS control panel menu
LCD shows
Setting WLAN
Connection status
Action
Searching or accessing the access
point, and downloading settings from the
access point.
—
Connecting to the access point.
—
Connection succeeded.
—
Connecting SES
Connecting WPS
3
Connecting AOSS
Connected
Connection Error
Session overlap has been detected.
Check that only one router or access point has
the SecureEasySetup mode, the Wi-Fi Protected
Setup mode or AOSS™ mode enabled and try
starting from step c again.
No Access Point
The access point detection failed.
Move the machine closer to your access
point/router and try starting from step c again.
1 Try starting from step c again.
Connection Fail
Connection failed.
2 If the same message continues, reset the
machine back to the factory settings and try
again.
(Windows®)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Install MFL-Pro Suite from
the CD-ROM menu.
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please double-click Start Here OSX from
the CD-ROM.
33
Configuring your machine for a wireless network (For MFC-9320CW)
Using the Setup Wizard from the control panel
3
You can configure your Brother machine by using the Setup Wizard function. This is located in the
Network menu on the machine’s control panel. See to the steps below for further information.
a
Write down the wireless network settings of your access point or wireless router. If you do not know them,
contact your network administrator or the manufacturer of your access point/router.
Check and record the current wireless network settings.
Network name:(SSID, ESSID)
Communication Mode
Authentication method
Encryption mode
Infrastructure
Open system
WEP 2
NONE
Shared key
WEP
WPA/WPA2-PSK 1
AES
Network key 4
—
2
TKIP 3
LEAP
CKIP
EAP-FAST/NONE
AES
EAP-FAST/MS-CHAPv2
TKIP
EAP-FAST/GTC
Ad-hoc
Open system
WEP 2
NONE
—
1
WPA/WPA2-PSK is a Wi-Fi Protected Access Pre-Shared Key, which lets the Brother wireless machine associate with access points using
TKIP or AES encryption (WPA-Personal). WPA2-PSK (AES), WPA-PSK (TKIP/AES) uses a Pre-Shared Key (PSK) that is 8 or more
characters in length, up to a maximum of 63 characters.
2
The WEP key is for 64-bit encrypted networks or 128-bit encrypted networks and can contain both numbers and letters. If you do not know
this information you should see the documentation provided with your access point or wireless router. This key is a 64-bit or 128-bit value
that must be entered in an ASCII or HEXADECIMAL format.
For example:
64-bit ASCII:
Uses 5 text characters e.g. “Hello” (this is case sensitive)
64-bit Hexadecimal:
Uses 10 digits of hexadecimal data e.g. “71f2234aba”
128-bit ASCII:
Uses 13 text characters e.g.
“Wirelesscomms” (this is case sensitive)
128-bit Hexadecimal:
Uses 26 digits of hexadecimal data
e.g.“71f2234ab56cd709e5412aa3ba”
3
This is supported for WPA-PSK only
4
Encryption key, WEP key, Passphrase.
For LEAP and EAP-FAST, record the User Name and Password
34
3
Configuring your machine for a wireless network (For MFC-9320CW)
For example:
Network name:(SSID, ESSID)
HELLO
b
c
d
Communication Mode
Authentication method
Encryption mode
Network key
Infrastructure
WPA2-PSK
AES
12345678
3
Plug the machine’s power cord into the AC power outlet. Turn on the machine’s power switch.
Press Menu on the control panel of the Brother machine.
Press a or b to choose Network.
Press OK.
Select ab or OK
7.Network
e
Press a or b to choose WLAN.
Press OK.
Network
2.WLAN
f
Press a or b to choose Setup Wizard.
Press OK.
WLAN
2.Setup Wizard
g
If the following message appears, press 1 to choose On. The wired network interface will become
inactive with this setting.
WLAN Enable ?
1.On 2.Off
h
The machine will search for your network and display a list of available SSIDs. You should see the SSID
you wrote down earlier. If the machine finds more than one network use a or b key to choose your
network, then press OK. Go to l.
If your access point is set to not broadcast the SSID, you will have to manually add the SSID name. Go to i.
i
Choose <New SSID> using a or b.
Press OK. Go to j.
Select SSID&Set
<New SSID>
j
Enter a new SSID. (For information how to type text, see Entering Text on page 189.)
Press OK.
SSID:
35
Configuring your machine for a wireless network (For MFC-9320CW)
k
Press a or b to choose Infrastructure or Ad-hoc.
Press OK.
Do one of the following:
If you chose Infrastructure, go to l.
If you chose Ad-hoc, go to m.
Mode Select
Infrastructure
l
3
Choose the Authentication method using a or b, and press OK.
Auth. Select
Open System
Do one of the following:
If you chose Open System, go to step m.
If you chose Shared Key, go to step n.
If you chose WPA/WPA2-PSK, go to q.
If you chose LEAP, go to step r.
If you chose EAP-FAST/NONE, EAP-FAST/MSCHAP 1 or EAP-FAST/GTC, go to step q.
1
m
Shown on the LCD as EAP-FAST/MSCHAPv2.
Choose the Encryption type, None or WEP using a or b, and press OK.
Encryption Type?
None
Do one of the following:
If you chose None, go to step t.
If you chose WEP, go to step n.
n
Choose the key option; KEY1, KEY2, KEY3, KEY4 using a or b, and press OK.
Set WEP KEY
KEY1:
If you chose the key which shows **********, go to step o.
If you chose a blank key, go to step p.
o
If you want to change the key you chose in step n, press 1 to choose Change. Go to step p.
If you want to keep the key you chose in step n, press 2 to choose Keep. Go to step t.
KEY1:***********
1.Change 2.Keep
p
Enter a new WEP key you wrote down in step a on page 34. Press OK. Go to step t. (To enter text
using keypad, see Entering Text on page 189.)
WEP:
q
Choose the Encryption type, TKIP or AES using a or b. Press OK.
If you have chosen WPA/WPA2-PSK in step l, go to step s.
If you have chosen EAP-FAST in step l, go to step r.
Encryption Type?
TKIP
36
Configuring your machine for a wireless network (For MFC-9320CW)
r
Enter the user name you wrote down in step a on page 34. Press OK. Go to step s. (To enter text using
keypad, see Entering Text on page 189.)
USER:
s
Enter the password you wrote down in step a on page 34. Press OK. Go to step t. (To manually enter
the text, see Entering Text on page 189.)
PASS:
t
To apply the settings, choose Yes. To cancel, choose No.
Apply Settings?
1.Yes 2.No
If you chose Yes, go to step u.
If you chose No, go back to step h.
u
v
The machine starts to connect to the wireless device you have chosen.
If your wireless device is connected successfully, the display shows Connected for one minute and
configuration is completed.
Connected
If the connection failed, the display shows Connection Fail for one minute. See Wireless network
troubleshooting (For MFC-9320CW) on page 156.
(Windows®)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Install MFL-Pro Suite from
the CD-ROM menu.
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please double-click Start Here OSX from
the CD-ROM.
37
3
Configuring your machine for a wireless network (For MFC-9320CW)
Using the PIN Method of Wi-Fi Protected Setup
3
If your wireless access point/router supports Wi-Fi Protected Setup (PIN Method), you can configure the
machine easily. The PIN (Personal Identification Number) Method is one of the connection methods
developed by the Wi-Fi Alliance. By inputting a PIN which is created by an Enrollee (your machine) to the
Registrar (a device that manages the wireless LAN), you can setup the wireless network and security
settings. See the user’s guide for your wireless access point/router for instructions on how to access the
Wi-Fi Protected Setup mode.
3
Note
Routers or access points that support Wi-Fi Protected Setup have a symbol as shown below.
a
b
Plug the machine’s power cord into the AC power outlet. Turn on the machine’s power switch.
Press Menu, 7, 2, 7. Using a or b, choose On and press OK.
Press Stop/Exit.
WLAN Enable
On
c
d
Press Menu, 7, 2, 4 for WPS w/PIN Code.
The LCD will show an 8 digit PIN and the machine starts searching for an access point for 5 minutes.
Connecting WPS
PIN:XXXXXXXX
e
Using a computer that is on the network, type “http://access point’s IP address/” into your
browser. (Where “access point’s IP address” is the IP address of the device that is used as the
Registrar 1.) Go to the WPS (Wi-Fi Protected Setup) setting page and input the PIN which the LCD
shows in d to the Registrar and follow the on-screen instructions.
1
The Registrar is normally the access point/router.
Note
The setting page is different, depending on the brand of access point/router. See the instruction manual
that came with your access point/router.
Windows Vista® and Windows® 7
3
If you are using your Windows Vista® or Windows® 7 computer as a Registrar, follow these steps:
Note
To use a Windows Vista® or Windows® 7 computer as a Registrar, you need to register it to your network
in advance. See the instruction manual that came with your access point/router.
38
Configuring your machine for a wireless network (For MFC-9320CW)
f
1
(Windows Vista®)
Click
, Network, and then Add a wireless device.
(Windows® 7)
Click
, Control Panel, Network and Internet, and then Add a wireless device to the network.
2
Choose your machine and click Next.
3
Input the PIN which the LCD shows in d on page 38 and then click Next.
4
Choose your network that you want to connect to, and then click Next.
5
Click Close.
3
If the LCD shows Connected, the machine has successfully connected to your access point/router. You
can now use your machine in a wireless network.
If the LCD shows Connection Fail, the machine has not successfully connected to your access
point/router. Try starting from c again. If the same message is indicated again, reset the machine back
to the default factory settings and try again. (For resetting, see Restoring the network settings to factory
default on page 79.)
If the LCD shows No Access Point, the machine has not detected your access point/router on your
network with the Wi-Fi Protected Setup mode enabled. Move the machine closer to your access
point/router and try starting from c again.
Or an incorrect PIN has typed into the WPS (Wi-Fi Protected Setup) setting page on your router or
access point. Retype the correct PIN and try starting from c again.
(Windows®)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Install MFL-Pro Suite from
the CD-ROM menu.
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please double-click Start Here OSX from
the CD-ROM.
39
4
Wireless configuration for Windows®
using the Brother installer application
(For MFC-9320CW)
4
Configuration in Infrastructure mode
4
Before configuring the wireless settings
4
4
IMPORTANT
• The following instructions will install your Brother machine in a network environment using the Brother
installer application for Windows® found on the CD-ROM we have provided with the machine.
• If you are using Windows® XP, or currently using a computer connected to an access point/router by
network cable, you need to know the wireless settings.
Item
Record the current wireless network settings
SSID (Network Name)
Network Key (Security Key/Encryption Key)
• If you have previously configured the wireless settings of the printer, you must reset the print server back
to its factory default settings (see Restoring the network settings to factory default on page 79).
• You need to temporarily use a USB cable during configuration.
40
Wireless configuration for Windows® using the Brother installer application (For MFC-9320CW)
Configure the wireless settings
a
b
Put the supplied CD-ROM into your CD-ROM drive.
c
The CD-ROM main menu will appear. Click Initial Installation.
4
The opening screen will appear automatically.
If the model name screen appears, choose your machine. If the language screen appears, choose your
language.
4
Note
• If the window does not appear, use Windows® Explorer to run the start.exe program from the root folder
of the Brother CD-ROM.
• When the User Account Control screen appears,
(Windows Vista®) click Allow.
(Windows® 7) click Yes.
d
e
f
Click Wireless LAN Setup Wizard.
g
Follow the screen instructions to configure the wireless settings.
Choose Use your computer or the control panel directly. and click Next.
Choose Temporarily use a USB cable (Recommended) and then click Next.
When the Important Notice screen appears, read the notice, check the box after you confirm the
wireless setting is enabled and then click Next.
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Install MFL-Pro Suite from
the CD-ROM menu.
41
5
Wireless configuration for Macintosh
using the Brother installer application
(MFC-9320CW only)
5
Configuration in Infrastructure mode
5
Before configuring the wireless settings
5
IMPORTANT
• The following instructions will install your Brother machine in a network environment using the Brother
installer application for Macintosh found on the CD-ROM we have provided with the machine.
5
• You must know your wireless network settings before you proceed with this installation.
Make sure you take notes on all the current settings such as SSID, authentication and encryption of your
wireless network environment. If you do not know them, contact your network administrator or the
manufacturer of your access point/router.
Check and record the current wireless network settings.
Network name:(SSID, ESSID)
Communication Mode
Authentication method
Encryption mode
Infrastructure
Open system
WEP 2
NONE
Shared key
WEP
WPA/WPA2-PSK 1
AES
Network key 4
—
2
TKIP 3
LEAP
CKIP
EAP-FAST/NONE
AES
EAP-FAST/MS-CHAPv2
TKIP
EAP-FAST/GTC
1
WPA/WPA2-PSK is a Wi-Fi Protected Access Pre-Shared Key, which lets the Brother wireless machine associate with access points using
TKIP or AES encryption (WPA-Personal). WPA2-PSK (AES), WPA-PSK (TKIP/AES) uses a Pre-Shared Key (PSK) that is 8 or more
characters in length, up to a maximum of 63 characters.
42
Wireless configuration for Macintosh using the Brother installer application (MFC-9320CW only)
2
The WEP key is for 64-bit encrypted networks or 128-bit encrypted networks and can contain both numbers and letters. If you do not know
this information you should see the documentation provided with your access point or wireless router. This key is a 64-bit or 128-bit value that
must be entered in an ASCII or HEXADECIMAL format.
For example:
64-bit ASCII:
Uses 5 text characters e.g. “Hello” (this is case sensitive)
64-bit Hexadecimal:
Uses 10 digits of hexadecimal data e.g. “71f2234aba”
128-bit ASCII:
Uses 13 text characters e.g.
“Wirelesscomms” (this is case sensitive)
128-bit Hexadecimal:
Uses 26 digits of hexadecimal data
e.g.“71f2234ab56cd709e5412aa3ba”
3
This is supported for WPA-PSK only
4
Encryption key, WEP key, Passphrase.
For LEAP and EAP-FAST, record the User Name and Password
5
For example:
Network name:(SSID, ESSID)
HELLO
Communication Mode
Authentication method
Encryption mode
Network key
Infrastructure
WPA2-PSK
AES
12345678
• If you have previously configured the wireless settings of the machine, you must reset the network LAN
settings before you can configure the wireless settings again. Press Menu, 7, 0 for Network Reset,
press 1 for Reset and then choose 1 for Yes to accept the change. The machine will restart automatically.
• If you are using a firewall function of anti-spyware or antivirus applications, temporarily disable them. Once
you are sure that you can print, configure the software settings following the instructions again.
• You need to temporarily use an Ethernet cable during configuration. (The Ethernet cable is not a standard
accessory.)
43
Wireless configuration for Macintosh using the Brother installer application (MFC-9320CW only)
Configure the wireless settings
a
b
c
Plug the machine’s power cord into the AC power outlet. Turn on the machine’s power switch.
d
Double-click the Utilities icon.
5
Turn on your Macintosh.
Put the supplied CD-ROM into your CD-ROM drive. Double-click the MFL-Pro Suite icon on your
desktop.
5
e
Double-click the Wireless Device Setup Wizard.
44
Wireless configuration for Macintosh using the Brother installer application (MFC-9320CW only)
f
Choose Step by Step install (Recommended) and then click Next.
5
g
Choose With cable (Recommended) and then click Next.
45
Wireless configuration for Macintosh using the Brother installer application (MFC-9320CW only)
h
Connect the Brother wireless device to your access point using a network cable and click Next.
5
i
Choose the machine you wish to configure, and click Next. If the list is blank, check if the access point
and the printer are powered on, and then click Refresh.
Note
• The default Node name is “BRNxxxxxxxxxxxx”. (“xxxxxxxxxxxx” is your machine’s MAC Address /
Ethernet Address.)
• You can find your machine’s MAC Address / Ethernet Address by printing out the Network Configuration
List. See Printing the Network Configuration List on page 80.
46
Wireless configuration for Macintosh using the Brother installer application (MFC-9320CW only)
j
The wizard will search for wireless networks available from your machine. Choose the access point you
wish to associate the machine with, and then click Next.
5
Note
• "SETUP" is the default SSID of the machine. Do not choose this SSID.
• If the list is blank, check that the access point has power and is broadcasting the SSID, and then see if the
machine and the access point are within range for wireless communication. Then, click Refresh.
• If your access point is set to not broadcast the SSID you can manually add it by clicking the Add button.
Follow the on-screen instructions for entering the Name (SSID), and then click Next.
k
If your network is not configured for Authentication and Encryption, the following screen will appear. To
continue configuration, click OK and go to step m.
47
Wireless configuration for Macintosh using the Brother installer application (MFC-9320CW only)
l
If your network is configured for Authentication and Encryption, the following screen will appear. When
configuring your Brother wireless machine, you must configure your machine to match the
Authentication and Encryption settings you wrote down on page 42 for your existing wireless
network. Choose the Authentication Method and Encryption Mode from the pop-up menu list in each
setting box. Then enter the Network Key and Confirm Network Key, and then click Next.
5
Note
• If you want to setup or configure an additional WEP key indexes other than WEP key1, click Advanced.
• If you do not know the Authentication or Encryption settings for your network, contact your network
administrator.
• If you are using WEP and the printed Network Configuration page in step m shows Link OK in the Wireless
Link Status, but the machine is not found on your network, make sure you entered the WEP key correctly.
The WEP key is case sensitive.
48
Wireless configuration for Macintosh using the Brother installer application (MFC-9320CW only)
m
Click Next. The settings will be sent to your machine. The settings will remain unchanged if you click
Cancel. The Network Configuration page will be printed.
5
Note
• If you want to manually enter the IP address settings of your machine, click Change IP Address and enter
the necessary IP address settings for your network.
• The control panel settings will be automatically changed to WLAN when the wireless settings are sent to
your machine.
49
Wireless configuration for Macintosh using the Brother installer application (MFC-9320CW only)
n
Check the printed Network Configuration page. Choose the status as it is shown in the
Wireless Link Status on the Network Configuration page. Click Next.
If your status is "Link OK.", go to step p.
If your status is "Failed To Associate", go to step o.
5
o
Click Finish. Wireless setup was unable to associate with a wireless network. This is probably due to
incorrect security settings. Reset the print server back to its factory default settings. (See Restoring the
network settings to factory default on page 79.) Confirm the security settings of your wireless network
and try starting from step e again.
50
Wireless configuration for Macintosh using the Brother installer application (MFC-9320CW only)
p
Disconnect the network cable between your access point (hub or router) and the machine, and click
Next.
5
q
Check the box after you confirm that you have completed the wireless settings, and then click Finish.
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please double-click Start Here OSX from
the CD-ROM.
51
6
Control panel setup
6
Network menu
6
Before using your Brother product in a network environment, you need to configure the correct TCP/IP
settings.
In this chapter, you will learn how to configure the network settings using the control panel, located on the
front of the machine.
The Network menu selections of the control panel allow you to set up the Brother machine for your network
configuration. Press Menu, then press a or b to choose Network. Proceed to the menu selection you wish
to configure. For additional information on the menu, see Function table and default factory settings
on page 169.
Please note that the machine is supplied with the BRAdmin Light utility and Remote Setup applications, which
also can be used to configure many aspects of the network. (See Changing the print server settings
on page 18.)
TCP/IP
6
6
If you connect the machine with an Ethernet cable to your network, use the Wired LAN menu selections. If
you connect the machine to a wireless Ethernet network, use the WLAN menu selections.
This menu has ten sections: Boot Method, IP Address, Subnet Mask, Gateway, Node Name,
WINS Config, WINS Server, DNS Server, APIPA and IPv6.
Boot Method
6
This selection controls how the machine obtains an IP address. The default setting is Auto.
Note
If you do not want your print server configured via DHCP, BOOTP or RARP, you must set the
Boot Method to Static so that the print server has a static IP address. This will prevent the print server
from trying to obtain an IP address from any of these systems. To change the Boot Method, use the
machine’s control panel, BRAdmin Light utility, Remote Setup or Web Based Management (web browser).
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
(MFC-9120CN, MFC-9010CN and DCP-9010CN) Go to step d.
(MFC-9320CW) Go to step c.
c
(MFC-9320CW only)
(For Wired) Press a or b to choose Wired LAN.
(For Wireless) Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose TCP/IP.
Press OK.
52
Control panel setup
e
Press a or b to choose Boot Method.
Press OK.
f
Press a or b to choose Auto 1, Static 2, RARP 3, BOOTP 4 or DHCP 5.
Press OK.
 If you chose Auto, RARP, BOOTP or DHCP, go to step g.
 If you chose Static, go to step h.
g
Enter how many times the machine tries to obtain the IP address. We recommend you to enter 3 or more.
Press OK.
h
Press Stop/Exit.
1
Auto mode
In this mode, the machine will scan the network for a DHCP server, if it can find one, and if the DHCP server is configured to allocate an IP address
to the machine, then the IP address supplied by the DHCP server will be used. If no DHCP server is available, then the machine will scan for a
BOOTP server. If a BOOTP server is available, and it is configured correctly, the machine will take its IP address from the BOOTP server. If a
BOOTP server is not available, the machine will scan for a RARP server. If a RARP server also does not answer, the IP Address is set using the
APIPA protocol. After the machine is initially powered ON, it may take a few minutes for the machine to scan the network for a server.
2
Static mode
In this mode the machine’s IP address must be manually assigned. Once entered the IP address is locked to the assigned address.
3
RARP mode
The Brother print server’s IP address can be configured using the Reverse ARP (RARP) facility on your host computer. (For more information on
RARP, see Using RARP to configure the IP address on page 160.)
4
BOOTP mode
BOOTP is an alternative to RARP that has the advantage of allowing configuration of the subnet mask and gateway. (For more information on
BOOTP, see Using BOOTP to configure the IP address on page 159.)
5
DHCP mode
Dynamic Host Configuration Protocol (DHCP) is one of several automated mechanisms for IP address allocation. If you have a DHCP server in
6
your network (typically a UNIX, Windows® 2000/XP, Windows Vista®, Windows® 7 network) the print server will automatically obtain its IP address
from a DHCP server and register its name with any RFC 1001 and 1002 compliant dynamic name services.
Note
• If you do not want your print server configured via DHCP, BOOTP or RARP, you must set the BOOT Method to static so that the print server has
a static IP address. This will prevent the print server from trying to obtain an IP address from any of these systems. To change the BOOT Method,
use the machine’s control panel Network menu, BRAdmin applications, Remote Setup or Web Based Management (web browser).
• On smaller networks, the DHCP server may be the router.
IP Address
6
This field displays the current IP address of the machine. If you have chosen a Boot Method of Static, enter
the IP address that you wish to assign to the machine (check with your network administrator for the IP
address to use). If you have chosen a method other than Static, the machine will attempt to determine its IP
address using the DHCP or BOOTP protocols. The default IP address of your machine will probably be
incompatible with the IP address numbering scheme of your network. We recommend that you contact your
network administrator for an IP address for the network the unit will be connected on.
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
(MFC-9120CN, MFC-9010CN and DCP-9010CN) Go to step d.
(MFC-9320CW) Go to step c.
53
Control panel setup
c
(MFC-9320CW only)
(For Wired) Press a or b to choose Wired LAN.
(For Wireless) Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose TCP/IP.
Press OK.
e
Press a or b to choose IP Address.
Press OK.
f
Enter the IP address using the dial pad. (To enter numbers and text, see Entering Text on page 189.)
Press OK.
g
Press Stop/Exit.
6
Subnet Mask
6
This field displays the current subnet mask used by the machine. If you are not using DHCP or BOOTP to
obtain the subnet mask, enter the desired subnet mask. Check with your network administrator for the subnet
mask to use.
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
(MFC-9120CN, MFC-9010CN and DCP-9010CN) Go to step d.
(MFC-9320CW) Go to step c.
c
(MFC-9320CW only)
(For Wired) Press a or b to choose Wired LAN.
(For Wireless) Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose TCP/IP.
Press OK.
e
Press a or b to choose Subnet Mask.
Press OK.
f
Enter the Subnet Mask address using the dial pad. (To enter numbers and text, see Entering Text
on page 189.)
Press OK.
g
Press Stop/Exit.
54
Control panel setup
Gateway
6
This field displays the current gateway or router address used by the machine. If you are not using DHCP or
BOOTP to obtain the gateway or router address, enter the address you wish to assign. If you do not have a
gateway or router, leave this field blank. Check with your network administrator if you are unsure.
a
b
c
Press Menu.
Press a or b to choose Network.
Press OK.
(MFC-9120CN, MFC-9010CN and DCP-9010CN) Go to step d.
(MFC-9320CW) Go to step c.
(MFC-9320CW only)
(For Wired) Press a or b to choose Wired LAN.
(For Wireless) Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose TCP/IP.
Press OK.
e
Press a or b to choose Gateway.
Press OK.
f
Enter the Gateway address using the dial pad. (To enter numbers and text, see Entering Text
on page 189.)
Press OK.
g
Press Stop/Exit.
6
Node Name
6
You can register the machine name on the Network. This name is often referred to as a NetBIOS name; it will
be the name that is registered by the WINS server on your network. Brother recommends the name
“BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a wireless network. (“xxxxxxxxxxxx” is
your machine’s MAC Address / Ethernet Address.)
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
(MFC-9120CN, MFC-9010CN and DCP-9010CN) Go to step d.
(MFC-9320CW) Go to step c.
c
(MFC-9320CW only)
(For Wired) Press a or b to choose Wired LAN.
(For Wireless) Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose TCP/IP.
Press OK.
55
Control panel setup
e
Press a or b to choose Node Name.
Press OK.
f
g
Press 1 to choose Change.
h
Press Stop/Exit.
Enter the Node Name using the dial pad. (To enter numbers and text, see Entering Text on page 189.)
Press OK.
WINS Config
6
This selection controls how the machine obtains the IP address of the WINS server.
a
b
Press Menu.
6
Press a or b to choose Network.
Press OK.
(MFC-9120CN, MFC-9010CN and DCP-9010CN) Go to step d.
(MFC-9320CW) Go to step c.
c
(MFC-9320CW only)
(For Wired) Press a or b to choose Wired LAN.
(For Wireless) Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose TCP/IP.
Press OK.
e
Press a or b to choose WINS Config.
Press OK.
f
Press a or b to choose Auto or Static.
Press OK.
g
Press Stop/Exit.
Auto
6
Automatically uses a DHCP request to determine the IP addresses for the primary and secondary WINS
servers. You must set the BOOT Method to Auto for this feature to work.
Static
6
Uses a specified IP address for the primary and secondary WINS servers.
56
Control panel setup
WINS Server
6
Primary WINS Server IP Address
6
This field specifies the IP address of the primary WINS (Windows® Internet Name Service) server. If set to a
non-zero value, the machine will contact this server to register its name with the Windows® Internet Name
Service.
Secondary WINS Server IP Address
6
This field specifies the IP address of the secondary WINS server. It is used as a backup to the Primary WINS
server address. If the Primary server is unavailable, the machine still can register itself with a secondary
server. If set to a non-zero value, the machine will contact this server to register its name with the Windows®
Internet Name Service. If you have a primary WINS server, but no secondary WINS server, simply leave this
field blank.
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
(MFC-9120CN, MFC-9010CN and DCP-9010CN) Go to step d.
(MFC-9320CW) Go to step c.
c
(MFC-9320CW only)
(For Wired) Press a or b to choose Wired LAN.
(For Wireless) Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose TCP/IP.
Press OK.
e
Press a or b to choose WINS Server.
Press OK.
f
Press a or b to choose Primary or Secondary.
Press OK.
g
Enter the WINS Server address using the dial pad. (To enter numbers and text, see Entering Text
on page 189.)
Press OK.
h
Press Stop/Exit.
57
6
Control panel setup
DNS Server
6
Primary DNS Server IP Address
6
This field specifies the IP address of the primary DNS (Domain Name System) server.
Secondary DNS Server IP Address
6
This field specifies the IP address of the secondary DNS server. It is used as a backup to the Primary DNS
server address. If the Primary server is unavailable, the machine will contact the Secondary DNS server. If
you have a primary DNS server, but no secondary DNS server, simply leave this field blank.
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
(MFC-9120CN, MFC-9010CN and DCP-9010CN) Go to step d.
(MFC-9320CW) Go to step c.
c
(MFC-9320CW only)
(For Wired) Press a or b to choose Wired LAN.
(For Wireless) Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose TCP/IP.
Press OK.
e
Press a or b to choose DNS Server.
Press OK.
f
Press a or b to choose Primary or Secondary.
Press OK.
g
Enter the DNS Server address using the dial pad. (To enter numbers and text, see Entering Text
on page 189.)
Press OK.
h
Press Stop/Exit.
6
APIPA
6
The setting of On will cause the print server to automatically allocate a Link-Local IP address in the range
(169.254.1.0 - 169.254.254.255) when the print server cannot obtain an IP address through the Boot Method
you have set. (See Boot Method on page 52.) Choosing Off means the IP address does not change, when
the print server cannot obtain an IP address through the Boot Method you have set.
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
(MFC-9120CN, MFC-9010CN and DCP-9010CN) Go to step d.
(MFC-9320CW) Go to step c.
58
Control panel setup
c
(MFC-9320CW only)
(For Wired) Press a or b to choose Wired LAN.
(For Wireless) Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose TCP/IP.
Press OK.
e
Press a or b to choose APIPA.
Press OK.
f
Press a or b to choose On or Off.
Press OK.
g
Press Stop/Exit.
IPv6
6
6
This machine is compatible with IPv6, the next generation internet protocol. If you want to use the IPv6
protocol, choose On. The default setting for IPv6 is Off. For more information on the IPv6 protocol, visit
http://solutions.brother.com/.
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
(MFC-9120CN, MFC-9010CN and DCP-9010CN) Go to step d.
(MFC-9320CW) Go to step c.
c
(MFC-9320CW only)
(For Wired) Press a or b to choose Wired LAN.
(For Wireless) Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose TCP/IP.
Press OK.
e
Press a or b to choose IPv6.
Press OK.
f
Press a or b to choose On or Off.
Press OK.
g
Press Stop/Exit.
Note
• If you set IPv6 to On, turn off the power switch and then turn it back on to enable this protocol.
• After you choose IPv6 On, this setting will be applied to both the wired and wireless LAN interface.
59
Control panel setup
Ethernet (wired network only)
6
Ethernet link mode. Auto allows the print server to operate in 100BASE-TX full or half duplex, or in 10BASE-T
full or half duplex mode by auto negotiation.
You can fix the server link mode to 100BASE-TX Full Duplex (100B-FD) or Half Duplex (100B-HD) and
10BASE-T Full Duplex (10B-FD) or Half Duplex (10B-HD). This change is valid after the print server has been
reset (default is Auto).
Note
If you incorrectly set this value, you may not be able to communicate with your print server.
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
c
(MFC-9320CW only)
Press a or b to choose Wired LAN.
Press OK.
d
Press a or b to choose Ethernet.
Press OK.
e
Press a or b to choose Auto, 100B-FD, 100B-HD, 10B-FD or 10B-HD.
Press OK.
f
Press Stop/Exit.
6
Setup Wizard (MFC-9320CW wireless network only)
6
The Setup Wizard guides you through the wireless network configuration. (For more information, see the
Quick Setup Guide or Using the Setup Wizard from the control panel on page 34.)
SES/WPS/AOSS (MFC-9320CW wireless network only)
6
If your wireless access point supports either SecureEasySetup, Wi-Fi Protected Setup (PBC 1) or AOSS™
(one-push method), you can configure the machine easily without a computer. Your Brother machine has the
SES/WPS/AOSS menu on the control panel. This feature automatically detects which mode your access
point uses, SecureEasySetup, Wi-Fi Protected Setup or AOSS™. By pushing a button on the wireless access
point/router and the machine, you can setup the wireless network and security settings. See the user’s guide
for your wireless access point/router for instructions on how to access one-push mode. (For more information,
see the Quick Setup Guide or Using the SES/WPS or AOSS control panel menu to configure your machine
for a wireless network (Automatic Wireless mode) on page 31.)
1
Push Button Configuration
60
Control panel setup
WPS w/PIN Code (MFC-9320CW wireless network only)
6
If your wireless access point supports Wi-Fi Protected Setup (PIN Method), you can configure the machine
easily without a computer. The PIN (Personal Identification Number) Method is one of the connection
methods developed by the Wi-Fi Alliance. By inputting a PIN which is created by an Enrollee (your machine)
to the Registrar (a device that manages the wireless LAN), you can setup the wireless network and security
settings. See the user’s guide for your wireless access point/router for instructions on how to access the
Wi-Fi Protected Setup mode. (For more information, see Using the PIN Method of Wi-Fi Protected Setup
on page 38.)
WLAN Status (MFC-9320CW wireless network only)
Status
6
6
6
This field displays the current wireless network status; Active(11b), Active(11g),
Wired LAN Active, WLAN OFF, Connection Fail or AOSS Active.
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
c
Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose WLAN Status.
Press OK.
e
Press a or b to choose Status.
Press OK.
f
The current wireless network status will be displayed; Active(11b), Active(11g),
Wired LAN Active, WLAN OFF, Connection Fail or AOSS Active.
g
Press Stop/Exit.
Signal
6
This field displays the current wireless network signal strength; Signal:Strong, Signal:Medium,
Signal:Weak or Signal:None.
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
c
Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose WLAN Status.
Press OK.
61
Control panel setup
e
Press a or b to choose Signal.
Press OK.
f
The current wireless network signal strength will be displayed; Signal:Strong, Signal:Medium,
Signal:Weak or Signal:None.
g
Press Stop/Exit.
SSID
6
This field displays the current wireless network SSID. The display shows up to 32 characters of the SSID
name.
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
c
Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose WLAN Status.
Press OK.
e
Press a or b to choose SSID.
Press OK.
f
g
The current wireless network SSID will be displayed.
6
Press Stop/Exit.
Comm.Mode
6
This field displays the current wireless network communication mode; Ad-hoc or Infrastructure.
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
c
Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose WLAN Status.
Press OK.
e
Press a or b to choose Comm. Mode.
Press OK.
f
g
The current wireless network communication mode will be displayed; Ad-hoc or Infrastructure.
Press Stop/Exit.
62
Control panel setup
Set to Default (MFC-9320CW only)
6
The Set to Default allows you to reset each wired or wireless settings to the factory default. If you want
to reset both wired and wireless settings, see Restoring the network settings to factory default on page 79.
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
c
(For Wired) Press a or b to choose Wired LAN.
(For Wireless) Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose Set to Default.
Press OK.
e
f
6
Press 1 to choose Reset.
Press Stop/Exit.
Wired Enable (MFC-9320CW wired network only)
6
If you want to use the wired network connection, set Wired Enable to On.
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
c
Press a or b to choose Wired LAN.
Press OK.
d
Press a or b to choose Wired Enable.
Press OK.
e
Press a or b to choose On or Off.
Press OK.
f
Press Stop/Exit.
63
Control panel setup
WLAN Enable (MFC-9320CW wireless network only)
6
If you want to use the wireless network connection, set WLAN Enable to On.
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
c
Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose WLAN Enable.
Press OK.
e
Press a or b to choose On or Off.
Press OK.
f
Press Stop/Exit.
6
E-mail / IFAX (For MFC-9120CN and MFC-9320CW: available as a download)
6
This menu has five selections: Mail Address, Setup Server, Setup Mail RX, Setup Mail TX and
Setup Relay. As this section requires you to enter a lot of text characters, you may find that it is more
convenient to use Web Based Management and your favorite web browser to configure these settings. (See
Web Based Management on page 101.) These settings must be configured for the IFAX feature to work. (For
more details about Internet fax, see Internet fax and Scan to E-mail (E-mail server) (For MFC-9120CN and
MFC-9320CW) on page 112.)
You can also access the character you want by repeatedly pressing the appropriate number key using the
machine’s control panel. (For more information, see Entering Text on page 189.)
Note
In order to use this function, please download the necessary software from the download page in the
Brother Solution Center. (http://solutions.brother.com/)
Mail Address
a
b
6
Press Menu.
Press a or b to choose Network.
Press OK.
c
Press a or b to choose E-mail/IFAX.
Press OK.
d
Press a or b to choose Mail Address.
Press OK.
e
Press 1 to change. Enter the mail address (up to 60 characters).
Press OK.
f
Press Stop/Exit.
64
Control panel setup
Setup Server
SMTP Server
6
6
This field displays the node name or IP address of an SMTP mail server (outgoing E-mail server) on your
network.
(Ex, “mailhost.brothermail.net” or “192.000.000.001”)
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
c
Press a or b to choose E-mail/IFAX.
Press OK.
d
Press a or b to choose Setup Server.
Press OK.
e
Press a or b to choose SMTP Server.
Press OK.
f
Press a or b to choose Name or IP Address.
Press OK.
g
Enter the SMTP server address (up to 64 characters).
Press OK.
h
Press Stop/Exit.
SMTP Port
6
6
This field displays the SMTP port number (for outgoing E-mails) on your network.
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
c
Press a or b to choose E-mail/IFAX.
Press OK.
d
Press a or b to choose Setup Server.
Press OK.
e
Press a or b to choose SMTP Port.
Press OK.
f
Enter the SMTP port number.
Press OK.
g
Press Stop/Exit.
65
Control panel setup
Auth. for SMTP
6
You can specify the security method for E-mail notification. (For details on security the methods for E-mail
notification, see Security methods for E-mail notification on page 123.)
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
c
Press a or b to choose E-mail/IFAX.
Press OK.
d
Press a or b to choose Setup Server.
Press OK.
e
Press a or b to choose Auth. for SMTP.
Press OK.
f
Press a or b to choose None, SMTP-AUTH or POP bef.SMTP.
Press OK.
g
If you chose None or POP bef.SMTP in step f, go to step k.
If you chose SMTP-AUTH in step f, go to step h.
h
Enter the account name for SMTP authentication.
Press OK.
i
Enter the account password for SMTP authentication.
Press OK.
j
Enter the account password again.
Press OK.
k
Press Stop/Exit.
POP3 Server
6
6
This field displays the node name or IP address of the POP3 server (incoming E-mail server) used by the
Brother machine. This address is necessary for the Internet fax features to function correctly.
(Ex, “mailhost.brothermail.net” or “192.000.000.001”)
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
c
Press a or b to choose E-mail/IFAX.
Press OK.
d
Press a or b to choose Setup Server.
Press OK.
e
Press a or b to choose POP3 Server.
Press OK.
66
Control panel setup
f
Press a or b to choose Name or IP Address.
Press OK.
g
Enter the POP3 server address (up to 64 characters).
Press OK.
h
Press Stop/Exit.
POP3 Port
6
This field displays the POP3 port number (for incoming E-mails) used by the Brother machine.
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
c
Press a or b to choose E-mail/IFAX.
Press OK.
d
Press a or b to choose Setup Server.
Press OK.
e
Press a or b to choose POP3 Port.
Press OK.
f
Enter the POP3 port number.
Press OK.
g
Press Stop/Exit.
6
Mailbox Name
6
You can specify a mailbox name on the POP3 server where the internet print jobs are to be retrieved.
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
c
Press a or b to choose E-mail/IFAX.
Press OK.
d
Press a or b to choose Setup Server.
Press OK.
e
Press a or b to choose Mailbox Name.
Press OK.
f
Enter the user account name assigned to the Brother machine that will login to the POP3 server (up to
60 characters).
Press OK.
g
Press Stop/Exit.
67
Control panel setup
Mailbox Pwd
6
You can specify the password for the POP3 server account where the internet print jobs are to be retrieved.
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
c
Press a or b to choose E-mail/IFAX.
Press OK.
d
Press a or b to choose Setup Server.
Press OK.
e
Press a or b to choose Mailbox Pwd.
Press OK.
6
f
Enter the user password assigned to the machine that will login to the POP3 server (up to 32 characters).
Please note that this password is case sensitive.
Press OK.
g
Enter the password again.
Press OK.
h
Press Stop/Exit.
Note
To set for no password, enter a single space.
APOP
6
You can enable or disable the APOP (Authenticated Post Office Protocol).
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
c
Press a or b to choose E-mail/IFAX.
Press OK.
d
Press a or b to choose Setup Server.
Press OK.
e
Press a or b to choose APOP.
Press OK.
f
Press a or b to choose On or Off.
Press OK.
g
Press Stop/Exit.
68
Control panel setup
Setup Mail RX
Auto Polling
6
6
When set to On, the machine automatically checks the POP3 server for new messages.
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
c
Press a or b to choose E-mail/IFAX.
Press OK.
d
Press a or b to choose Setup Mail RX.
Press OK.
e
Press a or b to choose Auto Polling.
Press OK.
f
Press a or b to choose On or Off.
Press OK.
g
Press Stop/Exit.
Poll Frequency
6
6
Sets the interval for checking for new messages on the POP3 server (default is 10Min).
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
c
Press a or b to choose E-mail/IFAX.
Press OK.
d
Press a or b to choose Setup Mail RX.
Press OK.
e
Press a or b to choose Poll Frequency.
Press OK.
f
Enter the polling frequency (up to 60 minutes).
Press OK.
g
Press Stop/Exit.
69
Control panel setup
Header
6
This selection allows the contents of the mail header to be printed when the received message is printed.
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
c
Press a or b to choose E-mail/IFAX.
Press OK.
d
Press a or b to choose Setup Mail RX.
Press OK.
e
Press a or b to choose Header.
Press OK.
f
Press a or b to choose All, Subject+From+To or None.
Press OK.
g
Press Stop/Exit.
6
Del Error Mail
6
When set to On, the machine automatically deletes error mails that the machine cannot receive from the POP
server.
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
c
Press a or b to choose E-mail/IFAX.
Press OK.
d
Press a or b to choose Setup Mail RX.
Press OK.
e
Press a or b to choose Del Error Mail.
Press OK.
f
Press a or b to choose On or Off.
Press OK.
g
Press Stop/Exit.
70
Control panel setup
Notification
6
The notification feature allows a confirmation of receipt message to be transmitted to the sending station
when the Internet Fax has been received.
This feature only works on Internet Fax machines that support the “MDN” specification.
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
c
Press a or b to choose E-mail/IFAX.
Press OK.
d
Press a or b to choose Setup Mail RX.
Press OK.
e
Press a or b to choose Notification.
Press OK.
f
Press a or b to choose On, MDN or Off.
Press OK.
g
Press Stop/Exit.
6
Setup Mail TX
6
Sender Subject
6
This field displays the subject that is attached to the Internet fax data being sent from the Brother machine to
a computer.
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
c
Press a or b to choose E-mail/IFAX.
Press OK.
d
Press a or b to choose Setup Mail TX.
Press OK.
e
Press a or b to choose Sender Subject.
Press OK.
f
If you want to change the Sender Subject, press 1 to choose Change to change the Sender Subject.
Go to g.
If you don’t want to change the Sender Subject, press 2 to choose Exit.
Go to h.
g
Enter the subject information (up to 40 characters).
Press OK.
h
Press Stop/Exit.
71
Control panel setup
Size Limit
6
Some E-mail servers do not allow you to send large E-mail documents (the System Administrator will often
place a limit on the maximum E-mail size). With this function enabled, the machine will display
Out of Memory when trying to send E-mail documents over 1 Mbyte in size. The document will not be sent
and an error report will be printed. The document you are sending should be separated into smaller
documents that will be accepted by the mail server. (For your information, a 42 page document based on the
ITU-T Test Chart #1 test chart is approximately 1 Mbyte in size.)
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
c
Press a or b to choose E-mail/IFAX.
Press OK.
d
Press a or b to choose Setup Mail TX.
Press OK.
e
Press a or b to choose Size Limit.
Press OK.
f
Press a or b to choose On or Off.
Press OK.
g
Press Stop/Exit.
Notification
6
6
The notification feature allows a confirmation of receipt message to be transmitted to the sending station
when the Internet Fax has been received.
This feature only works on Internet Fax machines that support the “MDN” specification.
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
c
Press a or b to choose E-mail/IFAX.
Press OK.
d
Press a or b to choose Setup Mail TX.
Press OK.
e
Press a or b to choose Notification.
Press OK.
f
Press a or b to choose On or Off.
Press OK.
g
Press Stop/Exit.
72
Control panel setup
Setup Relay
Rly Broadcast
6
6
This function allows the machine to receive a document over the Internet, and then relay it to other fax
machines through conventional analog landlines.
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
c
Press a or b to choose E-mail/IFAX.
Press OK.
d
Press a or b to choose Setup Relay.
Press OK.
e
Press a or b to choose Rly Broadcast.
Press OK.
f
Press a or b to choose On or Off.
Press OK.
g
Press Stop/Exit.
Relay Domain
6
6
You can register the Domain Names (Max. 10) that are allowed to request a Relay Broadcast.
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
c
Press a or b to choose E-mail/IFAX.
Press OK.
d
Press a or b to choose Setup Relay.
Press OK.
e
Press a or b to choose Relay Domain.
Press OK.
f
Press a or b to choose Relay(01 - 10).
Press OK.
g
Enter the Relay Domain name for the Domain that is being allowed to request a Relay Broadcast.
Press OK. (Up to 30 characters)
h
Press Stop/Exit.
73
Control panel setup
Relay Report
6
A Relay Broadcast Report can be printed at the machine that will act as a Relay Station for all Relay
Broadcasts.
Its primary function is to print reports of any relayed broadcasts that have been sent through the machine.
Please note: In order to use this function, you must assign the relay domain in the “Trusted Domains” section
of the Relay function settings.
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
c
Press a or b to choose E-mail/IFAX.
Press OK.
d
Press a or b to choose Setup Relay.
Press OK.
e
Press a or b to choose Relay Report.
Press OK.
f
Press a or b to choose On or Off.
Press OK.
g
Press Stop/Exit.
6
Note
For more information on Relay Broadcast, see Relay broadcast from a computer on page 117.
How to set a new default for Scan to E-mail (E-mail server)
(For MFC-9120CN and MFC-9320CW: available as a download)
6
You can choose the default color file type for the Scan to E-mail (E-mail server) function. (For the details on
how to operate Scan to E-mail (E-mail server), see Internet fax and Scan to E-mail (E-mail server) (For
MFC-9120CN and MFC-9320CW) on page 112.)
Note
In order to use this function, please download the necessary software from the download page in the
Brother Solution Center. (http://solutions.brother.com/)
a
b
c
Press Menu.
Press a or b to choose Network.
Press OK.
Press a or b to choose Scan To E-mail.
Press OK.
74
Control panel setup
d
Press a or b to choose Color 100 dpi, Color 200 dpi, Color 300 dpi, Color 600 dpi,
Gray 100 dpi, Gray 200 dpi, Gray 300 dpi, B&W 200 dpi or B&W 200x100 dpi.
Press OK.
e
If you chose Color 100 dpi, Color 200 dpi, Color 300 dpi, Color 600 dpi,
Gray 100 dpi, Gray 200 dpi or Gray 300 dpi in step d, press a or b to choose PDF,
Secure PDF, JPEG or XPS.
If you chose B&W 200 dpi or B&W 200x100 dpi in step d, press a or b to choose PDF, Secure PDF
or TIFF.
Press OK.
f
Press Stop/Exit.
How to set a new default for Scan to FTP (For MFC-9120CN and MFC-9320CW)
6
6
You can choose the default color file type for the Scan to FTP function.
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
c
Press a or b to choose Scan To FTP.
Press OK.
d
Press a or b to choose Color 100 dpi, Color 200 dpi, Color 300 dpi, Color 600 dpi,
Gray 100 dpi, Gray 200 dpi, Gray 300 dpi, B&W 200 dpi or B&W 200x100 dpi.
Press OK.
e
If you chose Color 100 dpi, Color 200 dpi, Color 300 dpi, Color 600 dpi,
Gray 100 dpi, Gray 200 dpi or Gray 300 dpi in step d, press a or b to choose PDF,
Secure PDF, JPEG or XPS.
If you chose B&W 200 dpi or B&W 200x100 dpi in step d, press a or b to choose PDF, Secure PDF
or TIFF.
Press OK.
f
Press Stop/Exit.
Note
For how to operate Scan to FTP, see Network Scanning in the Software User’s Guide on the CD-ROM we
have provided with the machine.
75
Control panel setup
How to set a new default for Scan to Network
(For MFC-9120CN and MFC-9320CW)
6
You can choose the default color and file type for the Scan to Network function to scan a document directly
to a server supporting CIFS on your local network or on the internet. (For the CIFS protocol, see Protocols
on page 8.)
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
c
Press a or b to choose ScanTo Network.
Press OK.
d
Press a or b to choose Color 100 dpi, Color 200 dpi, Color 300 dpi, Color 600 dpi,
Gray 100 dpi, Gray 200 dpi, Gray 300 dpi, B&W 200 dpi or B&W 200x100 dpi.
Press OK.
e
If you chose Color 100 dpi, Color 200 dpi, Color 300 dpi, Color 600 dpi,
Gray 100 dpi, Gray 200 dpi or Gray 300 dpi in step d, press a or b to choose PDF,
Secure PDF, JPEG or XPS.
If you chose B&W 200 dpi or B&W 200x100 dpi in step d, press a or b to choose PDF, Secure PDF
or TIFF.
Press OK.
f
Press Stop/Exit.
6
Note
For how to operate Scan to Network, see Network Scanning in the Software User’s Guide on the CD-ROM
we have provided with the machine.
76
Control panel setup
Fax to Server (For MFC-9120CN and MFC-9320CW: available as a download)
6
The Fax to Server feature allows the machine to scan a document and send it over the network to a separate
fax server. The document will then be sent from the server as fax data to the destination fax number over
standard phone lines. When the Fax to Server feature is set to On all automatic fax transmissions from the
machine will be sent to the fax server for fax transmission. You can continue to send a fax directly from the
machine using the manual fax feature.
To send a document to the fax server the correct syntax for that server must be used. The destination fax
number must be sent with a prefix and a suffix that match the parameters used by the fax server. In most
cases the syntax for the prefix is “fax=” and the syntax for the suffix would be the domain name of the fax
server E-mail gateway. The suffix must also include the “@” symbol at the beginning of the suffix. The prefix
and the suffix information must be stored in the machine before you can use the fax to server function.
Destination fax numbers can be saved in the One Touch or Speed Dial locations or entered using the dial
pad (up to 20 digit numbers). For example if you wanted to send a document to a destination fax number of
123-555-0001 the following syntax would be used.
6
Note
• In order to use this function, please download the necessary software from the download page in the
Brother Solution Center. (http://solutions.brother.com/)
• Your fax server application must support an E-mail gateway.
Setting Fax to Server to On
6
You can store the prefix/suffix address for the fax server in the machine.
Note
You can enter the prefix and suffix address using up to a total of 40 characters.
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
c
Press a or b to choose Fax to Server.
Press OK.
d
Press a or b to choose On.
Press OK.
e
Press a or b to choose Prefix.
Press OK.
77
Control panel setup
f
g
h
i
j
k
Enter the prefix using dial pad.
Press OK.
Press a or b to choose Suffix.
Press OK.
Enter the suffix using dial pad.
Press OK.
Press Stop/Exit.
How to operate Fax to Server
a
b
c
6
Place the document in the ADF or on the scanner glass.
6
Enter the fax number.
The machine will send the message over a TCP/IP network to the fax server.
Time Zone (For MFC-9120CN and MFC-9320CW)
6
This field displays your country time zone. The time shown is the time difference between your country and
Greenwich Mean Time. For example, the Time Zone for Eastern Time in the USA and Canada is UTC-05:00.
a
b
Press Menu.
Press a or b to choose Network.
Press OK.
c
Press a or b to choose Time Zone.
Press OK.
d
Press a or b to choose the time.
Press OK.
e
Press Stop/Exit.
Windows® Time Zone setting
6
You can see the time difference for your country by using the Time Zone setting in Windows®.
a
For Windows Vista®, Windows® 7 and Windows Server® 2008:
Click the
button, Control Panel, Date and Time, and then Change time zone.
®
For Windows XP and Windows Server® 2003:
Click the Start button, Control Panel, Date and Time, and then choose Time Zone.
For Windows® 2000:
Click the Start button, Settings, Control Panel, Date/Time, and then choose Time Zone.
b
Change the date and time. Verify your time zone settings from the pull-down menu (this menu displays
the time difference from GMT).
78
Control panel setup
Restoring the network settings to factory default
6
If you wish to reset the print server back to its default factory settings (resetting all information such as the
password and IP address information), please follow these steps:
Note
This function restores all wired and wireless network settings to the factory default.
a
b
c
d
e
f
Press Menu.
Press a or b to choose Network.
Press OK.
Press a or b to choose Network Reset.
Press OK.
6
Press 1 to choose Reset.
Press 1 to choose Yes for reboot.
The machine will re-start. You can now reconnect the network cable and configure the network settings
to work with your network.
79
Control panel setup
Printing the Network Configuration List
6
Note
Node name: Node name appears on the Network Configuration List. The default node name is
“BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a wireless network. (“xxxxxxxxxxxx” is
your machine’s MAC Address / Ethernet Address.)
The Network Configuration List prints a report listing all the current network configuration including the
network print server settings.
a
(For MFC-9320CW) Press Menu. Press a or b to choose Print Reports. Press OK.
(For MFC-9120CN) Press Reports.
(For MFC-9010CN and DCP-9010CN) Press Menu. Press a or b to choose Machine Info.. Press OK.
b
Press a or b to choose Network Config.
Press OK.
c
(For US) Press Black Start or Color Start.
(For UK) Press Mono Start or Colour Start.
6
Note
If the IP Address on the Nework Configuration List shows 0.0.0.0, wait for one minute and try again.
80
7
Driver Deployment Wizard
(Windows® only)
7
Overview
7
The Driver Deployment Wizard software can be used to ease the installation or even automate the installation
of a locally connected or network connected printer. The Driver Deployment Wizard can also be used to
create self running executable files which when run on a remote PC, completely automates the installation of
a printer driver. The remote PC does not have to be connected to a network.
Connection methods
7
The Driver Deployment Wizard supports the two connection methods.
Peer-to-peer
7
The device is connected to the network but each user prints directly to the printer WITHOUT printing through
a central queue.
1 Client computer
2 Network printer (your machine)
81
7
Driver Deployment Wizard (Windows® only)
Network Shared
7
The device is connected to a network and a central print queue is used to manage all print jobs.
7
1 Client computer
2 Also known as “Server” or “Print Server”
3 TCP/IP or USB
4 Printer (your machine)
82
Driver Deployment Wizard (Windows® only)
How to install the Driver Deployment Wizard software
a
Put the supplied CD-ROM into your CD-ROM drive. If the model name screen appears, choose your
machine. If the language screen appears, choose your language.
b
c
The CD-ROM main menu will appear. Click Network Utilities.
7
Choose the Driver Deployment Wizard installation program.
Note
When the User Account Control screen appears,
(Windows Vista®) click Allow.
(Windows® 7) click Yes.
d
e
f
Click Next in response to the Welcome message.
Read the License Agreement carefully. Then follow the on-screen instructions.
7
Click Finish. Now the Driver Deployment Wizard software has been installed.
83
Driver Deployment Wizard (Windows® only)
Using the Driver Deployment Wizard software
a
b
c
d
7
When you run the Wizard for the first time you will see a welcome screen. Click Next.
Choose MFC, and then click Next.
Choose your connection type to the machine that you want to print to.
Choose the option you require, and follow the on-screen instructions.
If you choose Brother Peer-to-Peer Network Printer, the following screen is displayed.
7
 Setting the IP Address
If the printer does not have an IP address, the Wizard will allow you to change the IP address by
selecting the printer from the list and by selecting the Configure IP option. A dialog box then appears
which allows you to specify information such as the IP address, subnet mask and also the gateway
address.
84
Driver Deployment Wizard (Windows® only)
e
Choose the printer driver if you wish to install.
 If the printer driver you wish to use is installed on your computer:
Check the box of Currently installed drivers and choose the printer you wish to install, and then
click Next.
 If the driver you wish to use is not installed on your computer:
1 Click Have Disk.
2 Choose the OS you wish to use, and then click OK.
3 Click Browse... and choose the appropriate printer driver that is contained in the CD-ROM or in
the network share. Click Open.
4 For example, choose the “X:\driver\32 1\your language” folder (where X is your drive letter). Click
OK.
1
32 folder for 32-bit OS users and 64 folder for 64-bit OS users
7
f
Click Next after you choose the correct driver.
85
Driver Deployment Wizard (Windows® only)
g
A summary screen will appear. Confirm the settings of the driver.
 Creating an executable file
The Driver Deployment Wizard software can also be used to create self running.EXE files. These selfrunning.EXE files can be saved to the network, copied to a CD-ROM, USB Flash memory drive or
even E-mailed to another user. Once run, the driver and its settings are automatically installed without
any user intervention.
• Copy the Driver files to this PC and create an installation program for other users.
Choose this option if you wish to install the driver onto your computer and also create a self-running
executable file for use with another computer using the same operating system as your own.
• Only create an Installation Program for other users.
Choose this option if the driver is already installed on your computer and you wish to create a
self-running executable file without installing the driver again on your own computer.
Note
• If you work in a "queue" based network and you create an executable file for another user who does not
have access to the same printer queue that you define into the executable file, the driver when installed
on the remote computer will default to LPT1 printing.
• If you check the box of Currently installed drivers in step e, you can change the default settings of the
printer driver, such as paper size by clicking Custom....
h
Click Finish. The driver is automatically installed to your computer.
86
7
8
Network printing from Windows®:
basic TCP/IP Peer-to-Peer printing
8
Overview
8
To connect your machine to your network, you need to follow the steps in the Quick Setup Guide. We
recommend that you use the Brother installer application on the CD-ROM which we have provided with the
machine. By using this application, you can easily connect your machine to your network and install the
network software and printer driver which you need to complete the configuration of your printer for a network.
You will be guided by the on-screen instructions until you are able to use your Brother network machine.
If you are a Windows® user and want to configure your machine without using the Brother installer
application, use the TCP/IP protocol in a Peer-to-Peer environment. Please follow the instructions in this
chapter. This chapter explains how to install the network software and the printer driver which you will need
to be able to print using your network machine.
Note
• You must configure the IP address on your machine before you proceed with this chapter. If you need to
configure the IP address, see Setting the IP address and subnet mask on page 15 first.
• Verify the host computer and the machine are either on the same subnet, or that the router is properly
configured to pass data between the two devices.
8
• If you are connecting to a Network Print Queue or Share (printing only), see Installation when using a
Network Print Queue or Share (printer driver only) on page 165 for installation details.
• The default password for Brother print server is “access”.
87
Network printing from Windows®: basic TCP/IP Peer-to-Peer printing
Configuring the standard TCP/IP port
8
Printer driver not yet installed
a
Put the supplied CD-ROM into your CD-ROM drive. If the model name screen appears, choose your
machine. If the language screen appears, choose your language.
b
c
d
e
f
g
The CD-ROM main menu will appear. Click Initial Installation.
8
Click Printer Driver Only (for Network).
Click Next in response to the Welcome message. Follow the on-screen instructions.
Choose Standard Installation and click Next.
Choose Brother Peer-to-Peer Network Printer, and then click Next.
Follow the on-screen instruction, and then click Next.
Note
Contact your administrator if you are not sure about the location and name of the printer on the network.
h
8
Continue through the wizard clicking Finish when complete.
Printer driver already installed
8
If you have already installed the printer driver and wish to configure it for network printing, follow these steps:
a
(Windows Vista®)
Click the
button, Control Panel, Hardware and Sound, and then Printers.
®
(Windows 7)
Click the
button, Devices and Printers.
(Windows Server® 2008)
Click the Start button, Control Panel, Hardware and Sound, and then Printers.
(Windows® XP and Windows Server® 2003)
Click the Start button and choose Printers and Faxes.
(Windows® 2000)
Click the Start button and choose Settings and then Printers.
b
c
d
e
f
Right click on the printer driver you wish to configure, and then choose Properties.
Click the Ports tab and click Add Port.
Choose the port that you wish to use. Typically this would be Standard TCP/IP Port. Then click the
New Port... button.
The Standard TCP/IP Port Wizard will start.
Enter the IP address of your network printer. Click Next.
88
Network printing from Windows®: basic TCP/IP Peer-to-Peer printing
g
h
Click Finish.
Close Printer Ports and Properties dialog box.
Other sources of information
8
See Configuring your machine for a network on page 12 to learn how to configure the IP address of the
printer.
8
89
9
Internet printing for Windows®
9
Overview
9
Windows® 2000/XP, Windows Vista®, Windows® 7 and Windows Server® 2003/2008 users can print using
TCP/IP and the standard Network Printing IPP protocol software built into Windows® 2000/XP, Windows
Vista®, Windows® 7 and Windows Server® 2003/2008 installation.
Note
• You must configure the IP address on your printer before you proceed with this chapter. If you need to
configure the IP address, see Chapter 2 first.
• Verify the host computer and machine are either on the same subnet, or that the router is properly
configured to pass data between the two devices.
• The default password for Brother print servers is “access”.
• This print server also supports the IPPS printing. (See Printing documents securely using IPPS
on page 128.)
9
90
Internet printing for Windows®
IPP printing for Windows® 2000/XP, Windows Vista®,
Windows® 7 and Windows Server® 2003/2008
9
Use the following instructions if you wish to use the IPP printing capabilities of Windows® 2000/XP, Windows
Vista®, Windows® 7 and Windows Server® 2003/2008.
The steps may vary depending on your operating system.
For Windows Vista®, Windows® 7 and Windows Server® 2008
a
9
(Windows Vista®)
Click the
button, Control Panel, Hardware and Sound, and then Printers.
®
(Windows 7)
Click the
button, Devices and Printers.
(Windows Server® 2008)
Click the Start button, Control Panel, Hardware and Sound, and then Printers.
b
c
d
e
Click Add a printer.
Choose Add a network, wireless or Bluetooth printer.
9
Click The printer that I want isn’t listed.
Choose Select a shared printer by name and then enter the following in the URL field:
http://printer’s IP address:631/ipp (where “printer’s IP address” is the printer’s IP
address or the node name.)
Note
If you have edited the hosts file on your computer or are using a Domain Name System (DNS), you can
also enter the DNS name of the print server. As the print server supports TCP/IP and NetBIOS names,
you can also enter the NetBIOS name of the print server. The NetBIOS name can be seen in the Network
Configuration List. (To learn how to print the Network Configuration List, see Printing the Network
Configuration List on page 80.) The NetBIOS name assigned is the first 15 characters of the node name,
and by default it will appear as “BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a
wireless network. (“xxxxxxxxxxxx” is your machine’s MAC Address / Ethernet Address.)
91
Internet printing for Windows®
f
When you click Next, Windows Vista®, Windows® 7 and Windows Server® 2008 will make a connection
with the URL that you specified.
 If the printer driver has already been installed:
You will see the printer selection screen in the Add Printer Wizard. Click OK.
If the appropriate printer driver is already installed on your computer, Windows Vista®, Windows® 7
and Windows Server® 2008 will automatically use that driver. In this case, you will simply be asked if
you wish to make the driver the default printer, after which the Driver installation wizard will complete.
You are now ready to print.
Go to step k.
 If the printer driver has NOT been installed:
One of the benefits of the IPP printing protocol is that it establishes the model name of the printer
when you communicate with it. After successful communication you will see the model name of the
printer automatically. This means that you do not need to inform Windows Vista®, Windows® 7 and
Windows Server® 2008 about the type of printer driver to be used.
Go to step g.
g
If your printer is not in the list of supported printers, click Have Disk. You will then be asked to insert the
driver disk.
h
Click Browse and choose the appropriate Brother printer driver that is contained on the CD-ROM or in
the network share. Click Open.
i
j
Click OK.
Specify the model name of the printer. Click OK.
Note
• When the User Account Control screen appears, click Continue or Yes.
• If the printer driver that you are installing does not have a Digital Certificate you will see a warning
message. Click Install this driver software anyway to continue with the installation. The Add Printer
Wizard will then complete.
k
You will see the Type a printer name screen in the Add Printer. Check the Set as the default printer
check box if you want to use this printer as the default printer, and then click Next.
l
To test the printer connection, click Print a test page, and then click Finish. The printer is now
configured and ready to print.
92
9
Internet printing for Windows®
For Windows® 2000/XP and Windows Server® 2003
a
(Windows® XP and Windows Server® 2003)
Click the Start button and choose Printers and Faxes.
(Windows®2000)
Click the Start button and choose Settings and then Printers.
b
(Windows® XP and Windows Server® 2003)
Click Add a printer to start the ‘Add printer’ wizard.
(Windows® 2000)
Double click the Add Printer icon to start the ‘Add printer’ wizard.
c
d
Click Next when you see the Welcome to the Add Printer Wizard screen.
e
f
9
Choose Network Printer.
(Windows® XP and Windows Server® 2003)
Choose A network printer, or a printer attached to another computer.
(Windows® 2000)
Choose Network Printer.
Click Next.
(Windows® XP and Windows Server® 2003)
Choose Connect to a printer on the Internet or on a home or office network and then enter the
following in the URL field:
http://printer’s IP address:631/ipp
(where “printer’s IP address” is the printer’s IP address or the node name.)
(Windows® 2000)
Choose Connect to a printer on the Internet or on your intranet and then enter the following in the
URL field:
http://printer’s IP address:631/ipp
(Where “printer’s IP address” is the printer’s IP address or the node name.)
Note
If you have edited the hosts file on your computer or are using a Domain Name System (DNS), you can
also enter the DNS name of the print server. As the print server supports TCP/IP and NetBIOS names,
you can also enter the NetBIOS name of the print server. The NetBIOS name can be seen in the Network
Configuration List. (To learn how to print the Network Configuration List, see Printing the Network
Configuration List on page 80.) The NetBIOS name assigned is the first 15 characters of the node name
and by default it will appear as “BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a
wireless network. (“xxxxxxxxxxxx” is your machine’s MAC Address / Ethernet Address.)
93
9
Internet printing for Windows®
g
When you click Next, Windows® 2000/XP and Windows Server® 2003 will make a connection with the
URL that you specified.
 If the printer driver has already been installed:
You will see the printer selection screen in the ‘Add printer’ wizard.
If the appropriate printer driver is already installed on your computer, Windows® 2000/XP and
Windows Server® 2003 will automatically use that driver. In this case, you will simply be asked if you
wish to make the driver the default printer, after which the Add Printer wizard will complete. You are
now ready to print.
Go to step l.
 If the printer driver has NOT been installed:
One of the benefits of the IPP printing protocol is that it establishes the model name of the printer
when you communicate with it. After successful communication you will see the model name of the
printer automatically. This means that you do not need to inform Windows® 2000/XP and Windows
Server® 2003 about the type of printer driver to be used.
Go to step h.
h
The driver installation starts automatically.
Note
If the printer driver that you are installing does not have a Digital Certificate you will see a warning
message. Click Continue Anyway 1 to continue with the installation.
1
9
Yes for Windows® 2000 users
i
(Windows® XP and Windows Server® 2003)
Click Have Disk. You will then be asked to insert the driver disk.
(Windows® 2000)
Click OK when you see the Insert Disk screen.
j
Click Browse and choose the appropriate Brother printer driver that is contained on the CD-ROM or in
the network share.
For example, choose the “X:\driver\32 1\your language” folder (where X is your drive letter). Click
Open.
1
k
l
m
32 folder for 32-bit OS users and 64 for 64-bit OS users
Click OK.
Check Yes if you want to use this printer as the default printer. Click Next.
Click Finish and the printer is now configured and ready to print. To test the printer connection, print a
test page.
94
Internet printing for Windows®
Specifying a different URL
9
Please note that there are several possible entries that you can enter for the URL field.
http://printer’s IP address:631/ipp
This is the default URL and we recommend that you use this URL.
http://printer’s IP address:631/ipp/port1
This is for HP Jetdirect compatibility.
http://printer’s IP address:631/
Note
If you forget the URL details, you can simply enter the above text (http://printer’s IP address/)
and the printer will still receive and process data.
Where “printer’s IP address” is the printer’s IP address or the node name.
• For example:
http://192.168.1.2/
http://BRN123456765432/
Other sources of information
9
For how to configure the IP address of the printer, see Configuring your machine for a network on page 12.
95
9
10
Network printing from Macintosh using
the BR-Script 3 driver
10
Overview
10
This chapter explains how to configure the BR-Script 3 (PostScript® 3™ language emulation) printer driver
on a Network using Mac OS X 10.3.9 or greater.
IMPORTANT
For the latest drivers and information on the Mac OS X you are using, visit the Brother Solutions Center
at: http://solutions.brother.com/.
How to choose the BR-Script 3 printer driver (TCP/IP)
For Mac OS X 10.3.9 to 10.4.x users
a
b
c
d
e
10
10
Turn the power of the machine ON.
From the Go menu, choose Applications.
Open the Utilities folder.
Double click the Printer Setup Utility icon.
10
Click Add.
96
Network printing from Macintosh using the BR-Script 3 driver
f
(Mac OS X 10.3.9) Choose IP Printing.
(Mac OS X 10.4.x) Choose IP Printer.
(Mac OS X 10.3.9)
g
(Mac OS X 10.4.x)
(Mac OS X 10.3.9) Enter the IP address of the printer into the Printer Address box.
(Mac OS X 10.4.x) Enter the IP address of the printer into the Address box.
(Mac OS X 10.3.9)
10
(Mac OS X 10.4.x)
Note
• The Network Configuration List will allow you to confirm the IP address. For more information on how to
print the configuration page, see Printing the Network Configuration List on page 80.
• When specifying the Queue Name, use the PostScript® service “BRNxxxxxxxxxxxx_AT” for Macintosh.
(“xxxxxxxxxxxx” is your machine’s MAC Address / Ethernet Address.)
97
Network printing from Macintosh using the BR-Script 3 driver
h
From the Printer Model pull-down list choose your model. For example, choose
Brother MFC-XXXX BR-Script3.
(Mac OS X 10.3.9)
i
(Mac OS X 10.4.x)
Click Add and the printer will be available from the Printer List. The machine is now ready to print.
10
98
Network printing from Macintosh using the BR-Script 3 driver
For Mac OS X 10.5.x to 10.6.x
a
b
c
d
e
Turn the power of the machine ON.
f
g
Choose Line Printer Daemon-LPD from the Protocol list.
10
From the Apple menu, choose System Preferences.
Click Print & Fax.
Click + button to add your machine.
Choose IP.
10
Enter the IP address of the printer into the Address box.
Note
• The Network Configuration List will allow you to confirm the IP address. For more information on how to
print the configuration page, see Printing the Network Configuration List on page 80.
• When specifying the Queue Name, use the PostScript® service “BRNxxxxxxxxxxxx_AT” for Macintosh.
(“xxxxxxxxxxxx” is your machine’s MAC Address / Ethernet Address.)
99
Network printing from Macintosh using the BR-Script 3 driver
h
From the Print Using pop-up menu choose Select a driver to use, and then from the printer model
scrolling list choose your model. For example, choose Brother MFC-XXXX BR-Script3, and then click
Add.
i
From the Default Printer pop-up menu choose your model to set as the default printer. The printer is
now ready.
10
Other sources of information
10
See Chapter 2 of this User’s Guide to learn how to configure the IP address of the printer.
100
11
Web Based Management
11
Overview
11
A standard Web Browser can be used to manage your machine using the HTTP (Hyper Text Transfer
Protocol). You can get the following information from a machine on your network using a web browser.
 Printer status information
 Change Fax configuration items, such as General Setup, Quick-Dial settings and Remote Fax
 Change network settings such as TCP/IP information.
 Configure Secure Function Lock 2.0
 Configure Scan to FTP
 Configure Scan to Network
 Software version information of the machine and print server
 Change network and machine configuration details
Note
We recommend Microsoft® Internet Explorer® 6.0 (or greater) or Firefox 1.0 (or greater) for Windows® and
Safari 1.3 (or greater) for Macintosh. Please also make sure that JavaScript and Cookies are always
enabled in whichever browser you use. If a different web browser is used, make sure it is compatible with
HTTP 1.0 and HTTP 1.1.
You must use the TCP/IP protocol on your network and have a valid IP address programmed into the print
server and your computer.
Note
• To learn how to configure the IP address on your machine, see Configuring your machine for a network
on page 12.
• You can use a web browser on most computing platforms, for example, Macintosh and UNIX users are
also able to connect to the machine and manage it.
• You can also use the BRAdmin applications to manage the printer and its network configuration.
• This print server also supports HTTPS for secure management using SSL. (See Managing your network
printer securely on page 125.)
101
11
Web Based Management
How to configure the machine settings using Web Based
Management (web browser)
11
A standard web browser can be used to change your print server settings using the HTTP (Hyper Text
Transfer Protocol).
Note
• We recommend to use HTTPS protocol for your internet security when configuring the settings using Web
Based Management. To enable the HTTPS protocol, see Configuring the protocol settings on page 124.
• To use a web browser, you will need to know the IP address or node name of the print server.
a
b
Start your web browser.
Type “http://printer’s IP address/” into your browser. (where “printer’s IP address” is
the printer’s IP address or the node name)
 For example:
http://192.168.1.2/
Note
• If you have edited the hosts file on your computer or are using a Domain Name System (DNS), you can
also enter the DNS name of the print server. As the print server supports TCP/IP and NetBIOS names,
you can also enter the NetBIOS name of the print server. The NetBIOS name can be seen in the Network
Configuration List. (To learn how to print the Network Configuration List, see Printing the Network
Configuration List on page 80.) The NetBIOS name assigned is the first 15 characters of the node name
and by default it will appear as “BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a
wireless network. (“xxxxxxxxxxxx” is your machine’s MAC Address / Ethernet Address.)
• For Macintosh users, you can have easy access to the Web Based Management System by clicking the
machine icon on Status Monitor screen. For more information, see the Software User’s Guide on the
CD-ROM.
c
d
Click Network Configuration.
e
f
Click OK.
Enter a user name and a password. The default User Name is “admin” and the default password is
“access”.
You can now change the print server settings.
Note
If you have changed the protocol settings, restart the printer after clicking Submit to activate the
configuration.
102
11
Web Based Management
Password information
11
Web Based Management offers two levels of password access. Users are able to access the General Setup,
Fax Settings, I-Fax Settings (MFC-9120CN and MFC-9320CW only), Copy Settings, Printer Settings
and USB Direct I/F. The default user name for User is “user” (case sensitive) and the default password is
“access”.
Administrators are able to access all settings. The login name for the Administrator is “admin” (case
sensitive) and the default password is “access”.
11
103
Web Based Management
Secure Function Lock 2.0 (For MFC-9320CW)
11
Secure Function Lock 2.0 from Brother helps you to save money and increase security by restricting the
functions available on your Brother machine.
Secure Function Lock allows you to configure passwords for selected users, granting them access to some,
or all, of these functions, or limiting them to a page limit. This means that only authorized people can use
them.
You can configure and change the following Secure Function Lock settings using a web browser.
 PC print 1
 USB Direct Print
 Copy
 Color Print
 Page Limit
 Fax TX
 Fax RX
 Scan
1
If you register the PC user login names, you can restrict PC print without the user entering a password. For more detail, see Restricting PC print
by PC user login name on page 106.
11
104
Web Based Management
How to configure the Secure Function Lock 2.0 settings using Web Based
Management (web browser) (For MFC-9320CW)
11
Basic configuration
a
11
Click Administrator Settings on the MFC-XXXX web page, and then click Secure Function Lock.
11
b
Choose On from Function Lock.
Note
To configure Secure Function Lock through the embedded web server, you have to enter the Administrator
Password (four digit number). If the settings have been configured previously using the Panel menu and
you want to change the settings, you must fill in the blank in the Administrator Password box first.
c
Enter an up to 15 digit alphanumeric group name or user name in the ID Number / Name box and then
enter a four-digit password in the PIN box.
d
Uncheck the functions that you want to restrict in the Print box or the Others box. If you want to configure
the maximum page count, check the On box in Page Limit, and then enter the number in the Max box.
Then click Submit.
105
Web Based Management
e
If you want to restrict the PC printing by PC login user name, click PC Print Restriction by Login Name
and configure the settings. (See Restricting PC print by PC user login name on page 106.)
Scanning when using Secure Function Lock 2.0
11
The Secure Function Lock 2.0 feature allows the administrator to restrict which users are allowed to scan.
When the scan feature is set to off for the public user setting, only users who have scan selected in the check
box will be able to scan. To push scan from the control panel of the machine users must enter their PIN to
access the scan mode. To pull scan from their computer, restricted users must also enter their PIN on the
control panel of the machine before they can scan from their computer. If the PIN is not entered at the
machines control panel the user will get an error message on their computer when they attempt to pull scan.
Restricting PC print by PC user login name
11
By configuring this setting, the printer can authenticate by PC user login name to allow a print job from a
registered computer.
a
Click PC Print Restriction by Login Name. The PC Print Restriction by Login Name screen will
appear.
11
b
Enter the PC user login name in the Login Name box and then choose the ID Number you set in the
ID Number / Name in step c in Basic configuration from the ID Number pull-down list for each Login
Name.
106
Web Based Management
c
Click Submit.
Note
• If you want to restrict PC print per group, choose the same ID Number for each PC login name you want
in the group.
• If you are using the PC login name feature you must also make sure that the Use PC Login Name box in
the printer driver is checked. For more information about the printer driver, see Chapter 1 in the
Software User’s Guide on the CD-ROM.
• The Secure Function Lock feature does not support the BRScript driver for printing.
Setting up public mode
11
You can set up the public mode to restrict what functions are available for public users. Public users do not
need to enter a password to access the features made available through this setting.
a
b
Uncheck the check box for the function that you want to restrict in the Public Mode box.
Click Submit.
Other features
11
You can set up the following features in the Secure Function Lock 2.0:
 All Counter Reset
You can reset the page counter by clicking All Counter Reset.
 Export to CSV file
You can export the current page counter including ID Number / Name information as a CSV file.
11
 Last Counter Record
The machine retains the page count after the counter has been reset.
 Counter Auto Reset Settings
You can automatically reset the page counters by configuring the time interval based on Daily, Weekly or
Monthly settings.
Note
• Secure Function Lock 2.0 can be configured using BRAdmin Professional 3; this is available as a
download from http://solutions.brother.com/. This utility is only available for Windows® users.
• The configuration you have set on the control panel for Secure Function Lock is applied to the Web Based
Management settings automatically.
107
Web Based Management
Changing the Scan to FTP configuration using a web browser
(For MFC-9120CN and MFC-9320CW)
11
Scan to FTP allows you to scan a document directly to an FTP server on your local network or on the Internet.
(See Chapter 4 in the Software User’s Guide for more details on Scan to FTP.)
a
Click Administrator Settings on the MFC-XXXX web page, and then click
FTP/Network Scan Settings.
b
You can choose what profile numbers (1 to 10) to use for Scan to FTP settings.
You can also store two user defined file names that can be used for creating an FTP Server Profile in
addition to the seven present file names in Create a User Defined File Name. A maximum of
15 characters can be entered in each of the two fields.
After setting, click Submit.
c
Click FTP/Network Scan Profile on Administrator Settings page.
Now you can configure and change the following Scan to FTP settings using a web browser.
11
 Profile Name (Up to 15 characters)
 Host Address (FTP server address)
 Username
 Password
 Store Directory
 File Name
 Quality
 File Type
 Passive Mode
 Port Number
108
Web Based Management
You can set Passive Mode to OFF or ON depending on your FTP server and network firewall configuration.
By default this setting is OFF. You can also change the port number used to access the FTP server. The
default for this setting is port 21. In most cases these two settings can remain as default.
Note
Scan to FTP is available when FTP server profiles are configured using Web Based Management.
11
109
Web Based Management
Changing the Scan to Network configuration using a web
browser (For MFC-9120CN and MFC-9320CW)
11
Scan to Network allows you to scan documents directly to a shared folder on a CIFS server located on your
local network or the Internet. (For more information on CIFS protocol, see Protocols on page 8.) To enable
the CIFS protocol, check the box for CIFS from the Network Configuration page. (See Chapter 12 in the
Software User’s Guide for more details on Scan to Network.)
Note
Scan to Network supports Kerberos Authentication and NTLMv2 Authentication. 1
1
Available for Windows® 2000 or greater.
a
Click Administrator Settings on the MFC-XXXX web page, and then click
FTP/Network Scan Settings.
b
c
You can choose what profile numbers (1 to 10) to use for Scan to Network settings.
Click FTP/Network Scan Profile on Administrator Settings page.
Now you can configure and change the following Scan to Network settings using a web browser.
11
 Profile Name (Up to 15 characters)
 Host Address
 Store Directory
 File Name
 Quality
 File Type
 Use PIN for authentication
110
Web Based Management
 PIN Code
 Auth. Method
 Username
 Password
 Kerberos Server Address
11
111
12
Internet fax and Scan to E-mail
(E-mail server)
(For MFC-9120CN and MFC-9320CW)
12
Internet fax overview
12
Internet faxing (IFAX) allows you to send and receive fax documents using the Internet as the transport
mechanism. Documents are transmitted in E-mail messages as attached TIFF-F files. This means that
computers are also able to receive and send documents, providing that the computer has as an application
that can generate and view TIFF-F files, you can use any TIFF-F viewer application. Any documents sent via
the machine will automatically be converted into a TIFF-F format. If you wish to send and receive messages
to and from your machine, your mail application on the computer must be able to support the MIME format.
E-mail
Relay Fax
(G3 TX)
Internet
E-mail
Intenet Fax
Internet
Relay E-mail
12
Note
• In order to use this function, please download the necessary software from the download page in the
Brother Solution Center. (http://solutions.brother.com/)
• Internet Fax is available in Black & White only.
Getting connected
12
Before sending or receiving an Internet fax you must configure your Brother machine to communicate with
your network and mail server. You must ensure the following: a correctly configured IP address for your
machine, an E-mail address for your machine, the mail server(s) IP address, mailbox name and password for
your Brother machine. If you are unsure of any of these items, please contact your systems Administrator.
(For details of how to configure this information, see Web Based Management on page 101.)
112
Internet fax and Scan to E-mail (E-mail server) (For MFC-9120CN and MFC-9320CW)
Control panel key functions
12
Shift + 1
12
Used to change input mode. You can use dial pad keys as Standard alphabet character keys.
Dial Pad
12
Used to enter Standard Alpha characters (26 letters), as well as @. space ! “ # % & ’ () + / : ; < > = ? [ ] ^ - $
, l _ and Numbers.
d or c
12
Moves the LCD cursor to the left or right when you enter text.
OK
12
Used to store multiple numbers.
(For US) Black Start or Color Start
(For UK) Mono Start or Colour Start
12
Begins transmitting the document.
Stop/Exit
12
Deletes entered data and stops the scanning or transmitting process.
One Touch
(Address Book)
12
These functions work the same way as with conventional machine’s.
However, please note that you cannot use chain dialing for E-mail address.
12
(For US) Shift + Black Start or Color Start
(For UK) Shift + Mono Start or Colour Start
12
Used to receive E-mail from the POP3 server manually.
Sending an Internet fax
12
Sending an Internet fax is the same as sending a normal fax. If you have already programmed the addresses
of the destination Internet fax machines as One Touch or Speed-Dial locations, you can send the Internet fax
by loading the document into the machine, use the Fax Resolution key to set the preferred resolution and
choose a Speed Dial or One Touch number and press Black Start/Mono Start or Color Start/Colour Start.
If you wish to manually enter the Internet fax address, load the document into the machine and press Shift
and 1 simultaneously to change into the “alphabet” dialing mode.
To manually enter the Internet fax address, see Entering Text on page 189.
113
Internet fax and Scan to E-mail (E-mail server) (For MFC-9120CN and MFC-9320CW)
Manually entering text
12
Press Shift and 1 simultaneously to change into the “alphabet” dialing mode.
You can use the Dial Pad to enter the E-mail address. For more information, see Entering Text on page 189.
Please note that also you can connect to the machine using a web browser and store the E-mail address
information to a Speed Dial or One Touch location through Web Based Management. (For more information
on Web Based Management, see Web Based Management on page 101.)
As you enter an Internet fax address, the address will appear character by character on the LCD panel. If you
specify more than 22 characters, the LCD panel will scroll the name to the left character by character. You
can enter up to 60 characters.
Press Black Start/Mono Start or Color Start/Colour Start to send the document.
After the document is scanned, it is transmitted to the recipient Internet fax machine automatically via your
SMTP server. You can cancel the send operation by pressing the Stop/Exit key during scanning. After the
transmission is finished, the machine will return to standby mode.
Some E-mail servers do not allow you to send large E-mail documents (the System Administrator will often
place a limit on the maximum E-mail size). With this function enabled, the machine will display
Out of Memory when trying to send E-mail documents over 1 Mbyte in size. The document will not be sent
and an error report will be printed. The document you are sending should be separated into smaller
documents that will be accepted by the mail server. (For your information, a 42 page document based on the
ITU-T Test Chart #1 test chart is approximately 1 Mbyte in size.)
Receiving E-mail or Internet fax
12
There are 2 ways you can receive E-mail messages:
 POP3 receiving (manually initiated)
 POP3 receiving at regular intervals
Using POP3 receiving the machine must poll the E-mail server to receive the print jobs. This polling can occur
at set intervals (for example, you can configure the machine to poll the E-mail server at 10 minute intervals)
or you can manually poll the server by pressing the Shift + Black Start/Mono Start or
Color Start/Colour Start keys.
If your machine starts to receive E-mail print jobs, the LCD panel will reflect this activity. For example, you
will see Receiving on the LCD panel followed by xx E-mail(s). If you press the Shift +
Black Start/Mono Start or Color Start/Colour Start keys to manually poll the E-mail server for E-mail print
jobs and there are no mail documents waiting to be printed, the machine will display No Mail on the LCD
panel for two seconds.
If your machine is out of paper when receiving data, the received data will be held in the machine's memory.
This data will be printed automatically after paper is re-inserted into the machine. (For European, Asian and
Oceanic machines, Memory Receive must be switched On.)
If the received mail is not in a plain text format or an attached file is not in the TIFF-F format, the following
error message will be printed: “ATTACHED FILE FORMAT NOT SUPPORTED. FILE NAME:XXXXXX.doc”.
If the received mail is too large, the following error message will be printed: "E-MAIL FILE TOO LARGE". If
Delete POP Receive Error Mail is ON (default) then the error mail is automatically deleted from the E-mail
server.
114
12
Internet fax and Scan to E-mail (E-mail server) (For MFC-9120CN and MFC-9320CW)
Receiving an Internet fax to your computer
12
When a computer receives an Internet fax document, the document is attached to a mail message that
informs the computer that it has received a document from an Internet fax. This is notified in the subject field
of the received mail message.
If the computer to which you wish to send a document is not running Windows® 2000/XP, Windows Server®
2003, Windows Server® 2008, Windows Vista® or Windows® 7 operating system, please inform the
computer's owner that they must install some software that can view TIFF-F files.
Forwarding received E-mail and fax messages
12
You can forward received E-mail or standard fax messages to another E-mail address or fax machine.
Received messages can be forwarded via E-mail to a computer or Internet fax. They can also be forwarded
via standard phone lines to another machine.
The setting can be enabled using a web browser or through the front panel of the machine. The steps for
configuring fax forward can be found in the User’s Guide supplied with your machine.
Please see the User’s Guide included with the machine to check that this feature is supported.
Relay broadcasting
12
This function allows the Brother machine to receive a document over the Internet, and then relay it to other
fax machines through conventional telephone lines.
If you wish to use your machine as a relay broadcast device, you must specify the domain name that you trust
at the machine, in other words, the portion of the name after the “@” sign.
A trusted domain refers to the E-mail address. For example, if the other party’s address is bob@brother.com,
then we identify the domain as brother.com. If the E-mail address is jack@brother.co.uk, then we identify the
domain as brother.co.uk.
Use care in selecting a trusted domain since any user on a trusted domain will be able to send a relay
broadcast. You can register up to 10 domain names.
Relay broadcast can support the relay of a document up to a maximum of 48 fax machines through
conventional telephone lines.
115
12
Internet fax and Scan to E-mail (E-mail server) (For MFC-9120CN and MFC-9320CW)
Relay broadcast from a machine
12
FAX@brother.com
UKFAX@brother.co.uk
123456789
Internet
UKFAX@brother.co.uk(fax#123456789)
In this example, your machine has an E-mail address of FAX@brother.com, you wish to send a document
from this machine to another machine in England with an E-mail address of UKFAX@brother.co.uk, this
machine will then forward the document to a standard fax machine using a conventional telephone line. If
your E-mail address is FAX@brother.com, you must configure a trusted domain name of brother.com on the
machine in England that will broadcast the document to the conventional fax machine. If you do not enter the
domain name information, then the machine in the middle (the machine that will broadcast the document) will
not trust any internet jobs that it receives from the machine in the @brother.com domain.
After the trusted domain is set you can send the document from your machine [e.g. FAX@brother.com] by
entering the E-mail address of the machine [e.g. UKFAX@brother.co.uk] that will forward the document
followed by the phone number of the fax that will receive the document. The following is an example of how
to enter the E-mail address and phone number.
UKFAX@brother.co.uk(fax#123456789)
Fax Phone Number
E-mail address
12
The word "fax#" must be
included with the phone
number inside the parenthesis.
Sending to multiple phone numbers:
12
If you want to have the document relayed to more than one standard fax machine the address can be entered
using the following method:
a
b
c
d
Enter the phone number of the first Fax machine UKFAX@brother.co.uk(fax#123).
Press OK.
Enter the phone number of the second Fax machine UKFAX@brother.co.uk(fax#456).
(For US) Press Black Start or Color Start.
(For UK) Press Mono Start or Colour Start.
116
Internet fax and Scan to E-mail (E-mail server) (For MFC-9120CN and MFC-9320CW)
Relay broadcast from a computer
12
Your PC
UKFAX@brother.co.uk
123456789
Internet
UKFAX@brother.co.uk(fax#123456789)
You can also send E-mail from your computer and have it relayed to a conventional fax machine. The method
of entering the phone number of the conventional fax machine that will receive the relayed E-mail will vary
depending on the mail application you are using. The following are some examples of different mail
applications:
Some E-mail applications do not support sending to multiple phone numbers. If your E-mail application
cannot support multiple phone numbers you will only be able to relay to one fax machine at a time.
Enter the address of the relay machine and phone number of the fax in the “TO” box using the same method
used when sending from a machine.
UKFAX@brother.co.uk(fax#123456789)
Microsoft® Outlook®:
12
For Microsoft® Outlook® 97 or greater, the address information must be entered into the address book as
follows:
Name: fax#123456789
E-mail address: UKFAX@brother.co.uk
12
TX Verification Mail
12
Transmission Verification Mail supports two separate functions. Verification Mail for sending allows you to
request notification from the receiving station that the Internet Fax or E-mail was received and processed.
Verification Mail for receiving allows you to transmit a default report back to the sending station after
successfully receiving and processing an Internet Fax or E-mail.
To use this feature you must set the Notification option within the Setup Mail RX and
Setup Mail TX options.
117
Internet fax and Scan to E-mail (E-mail server) (For MFC-9120CN and MFC-9320CW)
Setup Mail TX
12
You can set the Notification option in the Setup Mail TX option to either On or Off. When switched
to On an additional field of information is sent with the image data. This field is named “MDN”.
MDN (Mail Disposition Notification):
This field requests the status of the Internet Fax/E-mail message after delivery through the SMTP (Send Mail
Transfer Protocol) transport system. Once the message has arrived at the receiving station this data is used
when the machine or user reads or prints the received Internet Fax or E-mail. For example, if the message is
opened for reading or is printed the receiving station sends back a notification to the original sending machine
or user.
The receiving station must support the MDN field in order to be able to send a notification report, otherwise
the request will be ignored.
Setup Mail RX
12
There are three possible settings for this option On, MDN or Off.
Receive Notification “On”
When switched to “On” a fixed message is sent back to the sending station to indicate successful reception
and processing of the message. These fixed messages depend on the operation requested by the sending
station.
Report messages consist of:
SUCCESS: Received From <mail address>
Receive Notification “MDN”
When switched to “MDN” a report as described above is sent back to the sending station if the originating
station sent the “MDN” field to request confirmation.
Receive Notification “Off”
12
Off switches all forms of receive notification Off, no message are sent back to the sending station regardless
of the request.
Error mail
12
If there is a mail delivery error while sending an Internet fax, the mail server will send an error message back
to the machine and the error message will be printed. If there is an error while receiving mail, an error
message will be printed (Example: “The message being sent to the machine was not in a TIFF-F format.”).
118
Internet fax and Scan to E-mail (E-mail server) (For MFC-9120CN and MFC-9320CW)
Important information on Internet fax
12
Internet fax communication on a LAN system is basically the same as communication via E-mail; however, it
is different from fax communication using standard phone lines. The following is important information for
using Internet fax:
 Factors such as the receiver’s location, structure of the LAN system, and how busy the circuit (such as the
internet) is, may cause the system to take a long time to send back an error mail (normally 20 sec. to
30 sec.).
 In the case of transmission through the Internet, due to its low level of security, we recommend that you
use standard phone lines to send confidential documents.
 If the receiver’s mail system is not compatible with the MIME format, you cannot transmit a document to
the receiver. Depending on the receiver’s server, there may be some cases in which the error mail will not
be sent back.
 If the size of a document’s image data is too large, there is a possibility of unsuccessful transmission.
 You cannot change the font or character size of Internet mail that you received.
12
119
Internet fax and Scan to E-mail (E-mail server) (For MFC-9120CN and MFC-9320CW)
Scan to E-mail (E-mail server) overview
12
When you choose Scan to E-mail (E-mail Server) you can scan a black and white or color document and send
it directly to an E-mail address from the machine. You can choose PDF or TIFF for Black and White and PDF
or JPEG for color.
Note
Scan to E-mail (E-mail Server) requires SMTP/POP3 mail server support. (See Security methods for
E-mail notification on page 123.)
How to operate Scan to E-mail (E-mail server)
a
Put the document face up in the ADF, or face down on the scanner glass.
b
Press
c
Press a or b to choose Scan to E-mail.
Press OK.
d
Press a or b to choose Change Setting.
Press OK.
If you don’t have to change the quality, press a or b to choose Enter Address.
Press OK and then go to h.
e
Press a or b to choose Color 100 dpi, Color 200 dpi, Color 300 dpi, Color 600 dpi,
Gray 100 dpi, Gray 200 dpi, Gray 300 dpi, B&W 200 dpi or B&W 200x100 dpi.
Press OK.
If you chose Color 100 dpi, Color 200 dpi, Color 300 dpi, Color 600 dpi,
Gray 100 dpi, Gray 200 dpi or Gray 300 dpi, go to step f.
If you chose B&W 200 dpi or B&W 200x100 dpi, go to step g.
f
g
h
12
(Scan).
12
Press a or b to choose PDF, Secure PDF, JPEG or XPS. Press OK and go to step h.
Press a or b to choose PDF, Secure PDF or TIFF. Press OK and go to step h.
The LCD prompts you to enter an address. Enter the destination E-mail address from the dial pad or use
the One Touch key or Speed Dial number. Press Black Start/Mono Start or Color Start/Colour Start.
The machine starts the scanning process.
Note
You can only choose a One Touch key or Speed Dial number that has an E-mail address registered as
the scan profile.
120
Internet fax and Scan to E-mail (E-mail server) (For MFC-9120CN and MFC-9320CW)
Using One Touch or Speed Dial number
12
You can also scan a document directly to an address you registered in a One Touch or Speed Dial number.
When you scan the document, the settings you registered with the One Touch or Speed Dial will be used for
the quality and the file type. Only One Touch or Speed Dials with an E-mail address registered can be used
when you scan data using One Touch or Speed Dial. (Internet Fax addresses are not available for use.)
a
Put the document face up in the ADF, or face down on the scanner glass.
b
Press
c
d
Choose One Touch.
(Scan).
(For US) Press Black Start or Color Start.
(For UK) Press Mono Start or Colour Start.
The machine starts the scanning progress.
Note
You can store the scan resolution (scan profile) for each E-mail address if you store the E-mail address in
a One Touch or Speed Dial number.
12
121
13
Security features
13
Overview
13
In today’s world there are many security threats to your network and the data that travels over it. Your Brother
machine employs some of the latest network security and encryption protocols available today. These
network features can be integrated into your overall network security plan to help protect your data and
prevent unauthorized access to the machine. This chapter explains various security protocols supported and
how to configure them.
Security terms
13
 CA (Certificate Authority)
A CA is an entity that issues digital certificates (especially X.509 certificates) and vouches for the binding
between the data items in a certificate.
 CSR (Certificate Signing Request)
A CSR is a message sent from an applicant to a CA in order to apply for issue of a certificate. The CSR
contains information identifying the applicant, the public key generated by the applicant and the digital
signature of the applicant.
 Certificate
A Certificate is the information that binds together a public key with an identity. The certificate can be used
to verify that a public key belongs to an individual. The format is defined by the x.509 standard.
 Digital signature
A Digital signature is a value computed with a cryptographic algorithm and appended to a data object in
such a way that any recipient of the data can use the signature to verify the data's origin and integrity.
 Public key cryptosystem
A Public key cryptosystem is a modern branch of cryptography in which the algorithms employ a pair of
keys (a public key and a private key) and use a different component of the pair for different steps of the
algorithm.
 Shared key cryptosystem
A Shared key cryptosystem is a branch of cryptography involving algorithms that use the same key for two
different steps of the algorithm (such as encryption and decryption).
122
13
Security features
Security protocols
13
The Brother print server supports the following security protocols.
Note
How to configure the protocol settings, see Using Web Based Management (web browser) to change the
print/scan server settings on page 19.
SSL (Secure Socket Layer) / TLS (Transport Layer Security)
13
These security communication protocols encrypt data to prevent security threats.
Web server (HTTPS)
13
The internet protocol that the Hyper Text Transfer Protocol (HTTP) uses SSL.
IPPS
13
The printing protocol that the Internet Printing Protocol (IPP Version 1.0) uses SSL.
SNMPv3
13
The Simple Network Management Protocol version 3 (SNMPv3) provides user authentication and data
encryption to manage network devices securely.
Security methods for E-mail notification
13
The Brother print server supports the following security methods for E-mail notification.
Note
How to configure the settings of security methods, see Using Web Based Management (web browser) to
change the print/scan server settings on page 19.
POP before SMTP (PbS)
13
The user authentication method for sending E-mail from a client. The client is given permission to use the
SMTP server by accessing the POP3 server before sending the E-mail.
SMTP-AUTH (SMTP Authentication)
13
SMTP-AUTH expands SMTP (the Internet E-mail sending protocol) to include an authentication method that
ensures the true identity of the sender is known.
APOP (Authenticated Post Office Protocol)
13
APOP expands POP3 (the Internet receiving protocol) to include an authentication method that encrypts the
password when the client receives E-mail.
123
13
Security features
Configuring the protocol settings
13
You can enable or disable each protocol and security method using Web Based Management (web browser).
Note
We recommend Microsoft® Internet Explorer® 6.0 (or greater) or Firefox 1.0 (or greater) for Windows® and
Safari 1.3 (or greater) for Macintosh. Please also make sure that JavaScript and Cookies are always
enabled in whichever browser you use. To use a web browser, you will need to know the IP address of the
print server.
a
b
Start your web browser.
Type “http://printer’s IP address/” into your browser (where “printer’s IP address” is
the printer’s IP address or the node name).
 For example:
http://192.168.1.2/
Note
• If you have edited the hosts file on your computer or are using a Domain Name System, you can also enter
the DNS name of the print server.
• For Windows® users, as the print server supports TCP/IP and NetBIOS names, you can also enter the
NetBIOS name of the print server. The NetBIOS name can be seen on the Network Configuration List. To
learn how to print the Network Configuration List, see Printing the Network Configuration List on page 80.
The NetBIOS name assigned is the first 15 characters of the node name and by default it will appear as
“BRNxxxxxxxxxxxx" for a wired network or "BRWxxxxxxxxxxxx" for a wireless network.
c
d
e
f
Click Network Configuration.
Enter a user name and a password. The default User Name is “admin” and the default Password is
“access”.
Click OK.
13
Click Configure Protocol.
Now you can configure the protocol settings.
Note
If you change the protocol settings, restart the printer after clicking Submit to activate the configuration.
124
Security features
Managing your network printer securely
13
To manage your network printer securely, you need to use the management utilities with security protocols.
Secure Management using Web Based Management (web browser)
13
We recommend to use HTTPS and SNMPv3 protocol for secure management. To use the HTTPS protocol,
the following printer settings are required.
 A certificate and private key must be installed in the printer. (For how to install a certificate and private key,
see Creating and installing a certificate on page 131.)
 The HTTPS protocol must be enabled. To enable the HTTPS protocol, enable
SSL communication is used (port 443) from the Advanced Setting page of
Web Based Management (web server) on the Configure Protocol page. (To enable the HTTPS
protocol, see Configuring the protocol settings on page 124.)
Note
• We recommend Microsoft® Internet Explorer® 6.0 (or greater) or Firefox 1.0 (or greater) for Windows® and
Safari 1.3 (or greater) for Macintosh. Please also make sure that JavaScript and Cookies are always
enabled in whichever browser you use. To use a web browser, you will need to know the IP address of the
print server.
• We recommend to disable the Telnet, FTP and TFTP protocols. Accessing the machine using these
protocols is not secure. See Configuring the protocol settings on page 124.
a
b
Start your web browser.
Type “https://Common Name/” into your browser. (Where “Common Name” is the Common Name
that you assigned for the certificate, such as an IP address, node name or domain name.) (For how to
assign a Common Name for the certificate, see Creating and installing a certificate on page 131.)
 For example:
https://192.168.1.2/ (if the Common Name is the printer’s IP address)
Note
• If you have edited the hosts file on your computer or are using a Domain Name System, you can also enter
the DNS name of the print server.
• For Windows® users, as the print server supports TCP/IP and NetBIOS names, you can also enter the
NetBIOS name of the print server. The NetBIOS name can be seen on the Network Configuration List. To
learn how to print the Network Configuration List, see Printing the Network Configuration List on page 80.
The NetBIOS name assigned is the first 15 characters of the node name and by default it will appear as
“BRNxxxxxxxxxxxx" for a wired network or "BRWxxxxxxxxxxxx" for a wireless network.
c
You can now access the printer using HTTPS.
We recommend secure management (SNMPv3) be used along with the HTTPS protocol. If you use the
SNMPv3 protocol, follow the steps below.
Note
You can also change the SNMP settings by using BRAdmin Professional 3 or Web BRAdmin.
125
13
Security features
d
e
f
g
h
i
Click Network Configuration.
Enter a user name and a password. The default User Name is “admin” and the default Password is
“access”.
Click OK.
Click Configure Protocol.
Make sure that the SNMP setting is enabled, and then click Advanced Setting of SNMP.
You can configure the SNMP settings from the screen below.
We have three SNMP connection modes of operation.
 SNMPv3 read-write access
With this mode the print server uses version 3 of SNMP protocol. If you want to manage the print server
securely, use this mode.
Note
When you use the SNMPv3 read-write access mode, please note the following.
13
• You can manage the print server by using BRAdmin Professional 3, Web BRAdmin or Web Based
Management (web browser) only.
• We recommend secure SSL communication (HTTPS) be used.
• Except for BRAdmin Professional 3 and Web BRAdmin, all applications that use SNMPv1/v2c will be
restricted. To allow the use of SNMPv1/v2c applications, use
SNMPv3 read-write access and v1/v2c read-only access or SNMPv1/v2c read-write access
mode.
126
Security features
 SNMPv3 read-write access and v1/v2c read-only access
In this mode the print server uses the read-write access of version 3 and the read-only access of version 1
and version 2c of the SNMP protocol.
Note
When you use the SNMPv3 read-write access and v1/v2c read-only access mode, some of Brother
applications (e.g. BRAdmin Light) that access to the print server do not work properly since they authorize
the read-only access of version 1 and version 2c. If you want to use all applications, use the
SNMPv1/v2c read-write access mode.
 SNMPv1/v2c read-write access
In this mode the print server uses version 1 and version 2c of the SNMP protocol. You can use all Brother
applications under this mode. However, it is not secure since it will not authenticate the user and the data
will not be encrypted.
Note
For more information, see the Help text in Web Based Management.
Secure Management using BRAdmin Professional 3 (for Windows®)
13
To use the BRAdmin Professional utility securely, you need to follow the points below.
13
 We strongly recommend to use the latest version of the BRAdmin Professional 3 utility or Web BRAdmin
that are available as a download from http://solutions.brother.com/. If you use an older version of
BRAdmin 1 to manage your brother machines the user authentication will not be secure.
 If you want to avoid access to your printer from older versions of BRAdmin 1, you need to disable the
access from older versions of BRAdmin 1 from Advanced Setting of SNMP on Configure Protocol page
using Web Based Management (web browser). (See Using Web Based Management (web browser) to
change the print/scan server settings on page 19.)
 Disable the Telnet, FTP and TFTP protocols. Accessing the machine using these protocols is not secure.
(For how to configure the protocol settings, see Using Web Based Management (web browser) to change
the print/scan server settings on page 19.) If you disable the FTP, Scan to FTP function will be disabled.
 If you use BRAdmin Professional and Web Based Management (web browser) together, use Web Based
Management with the HTTPS protocol. (See Secure Management using Web Based Management (web
browser) on page 125.)
 If you are managing a mixed group of older print servers 2 and the new NC-6700h or NC-7500w print
servers with BRAdmin Professional, we recommend using a different password in each group. This will
ensure security is maintained on the new NC-6700h or NC-7500w print servers.
1
BRAdmin Professional older than Ver. 2.80, Web BRAdmin older than Ver. 1.40, BRAdmin Light for Macintosh older than Ver. 1.10
2
NC-2000 series, NC-2100p, NC-3100h, NC-3100s, NC-4100h, NC-5100h, NC-5200h, NC-6100h, NC-6200h, NC-6300h, NC-6400h, NC-8000,
NC-100h, NC-110h, NC-120w, NC-130h, NC-140w, NC-8100h, NC-9100h, NC-7100w, NC-7200w, NC-2200w
127
13
Security features
Printing documents securely using IPPS
13
To print documents securely over the internet, you can use the IPPS protocol.
Note
• Communication using IPPS cannot prevent unauthorized access to the print server.
• IPPS is available for Windows® 2000/XP, Windows Vista®, Windows® 7 and Windows Server®
2003/2008.
To use the IPPS protocol, the following printer settings are required.
 A certificate and private key must be installed in the printer. For how to install certificate and private key,
see Creating and installing a certificate on page 131.
 The HTTPS protocol must be enabled. To enable the IPPS protocol, enable
SSL communication is used (port 443) from the Advanced Setting page on IPP on the
Configure Protocol page. For information of how to access the Configure Protocol page, see
Configuring the protocol settings on page 124.
The basic steps for IPPS printing are the same as IPP printing. For detailed information, see Internet printing
for Windows® in Chapter 9.
Specifying a different URL
13
Please note that there are several possible entries that you can enter for the URL field.
https://Common Name/ipp/
This is the default URL and we recommend that you use this URL. Please note the Get More Info option will
not display any printer data.
https://Common Name/ipp/port1/
This is for HP Jetdirect compatibility. Please note the Get More Info option will not display any printer data.
Note
If you forget the URL details, you can simply enter the above text (https://Common Name/) and the
printer will still receive and process data.
Where “Common Name” is the Common Name that you assigned for the certificate, such as an IP address,
node name or domain name. (For how to assign a Common Name for the certificate, see Creating and
installing a certificate on page 131.)
• For example:
https://192.168.1.2/ (If the Common Name is the printer’s IP address.)
128
13
Security features
Using E-mail notification with user authentication
13
To use the E-mail notification function via secure SMTP server that requires a user authentication, you need
to use POP before SMTP or SMTP-AUTH method. These methods prevent an unauthorized user from
accessing the mail server. You can use Web Based Management (web browser), BRAdmin Professional and
Web BRAdmin to configure these settings.
Note
You need to match the settings of POP3/SMTP authentication with one of the E-mail servers. Contact your
network administrator or your internet service provider about the configuration before using.
How to configure the POP3/SMTP settings using Web Based Management (web browser).
a
b
Start your web browser.
Type “http://printer’s IP address/” into your browser (where “printer’s IP address” is
the printer’s IP address or the node name).
 For example:
http://192.168.1.2/
Note
• If you have edited the hosts file on your computer or are using a Domain Name System, you can also enter
the DNS name of the print server.
• For Windows® users, as the print server supports TCP/IP and NetBIOS names, you can also enter the
NetBIOS name of the print server. The NetBIOS name can be seen on the Network Configuration List. To
learn how to print the Network Configuration List, see Printing the Network Configuration List on page 80.
The NetBIOS name assigned is the first 15 characters of the node name and by default it will appear as
“BRNxxxxxxxxxxxx" for a wired network or "BRWxxxxxxxxxxxx" for a wireless network.
c
d
Click Network Configuration.
e
f
g
Click OK.
Enter a user name and a password. The default User Name is admin and the default Password is
access.
13
Click Configure Protocol.
Make sure that the POP3/SMTP setting is Enable, and then click Advanced Setting of POP3/SMTP.
129
Security features
h
You can configure the POP3/SMTP settings on this page.
Note
• You can also change the SMTP port number using Web Based Management. This is useful if your ISP
(Internet Service Provider) implements the “Outbound Port 25 Blocking (OP25B)” service. By changing the
SMTP port number to a specific number which your ISP is using for the SMTP server (for example, port
587), you would then be able to send an E-mail via the SMTP server. You will also need to check
SMTP-AUTH of SMTP Server Authentication Method to enable the SMTP server authentication.
• If you can use both POP before SMTP and SMTP-AUTH, we recommend choosing SMTP-AUTH.
• If you choose POP before SMTP for the SMTP Server Authentication Method, you need to configure the
POP3 settings. You can also use the APOP method.
• For more information, see the Help text in the Web Based Management.
• You can also confirm whether the E-mail settings are correct after configuration by sending a test E-mail.
i
j
After configuring, click Submit. The Test E-mail Send/Receive Configuration dialog appears.
Follow the instructions on-screen if you want to test with the current settings.
130
13
Security features
Creating and installing a certificate
13
The Brother print server allows you to use SSL/TLS communication by configuring a certificate and
corresponding private key. This print server supports two certification methods. A self-signed certificate and
a certificate that is issued by a CA (Certificate Authority).
 Using self-signed certificate
This print server issues its own certificate. Using this certificate, you can easily use the SSL/TLS
communication without having a certificate from a CA. (See Creating and installing a self-signed certificate
on page 132.)
 Using a certificate from a CA
There are two methods for installing a certificate from a CA. If you already have a CA or if you want to use
a certificate from an outside trusted CA:
• When using a CSR (Certificate Signing Request) from this print server. (See Creating CSR and
installing a certificate on page 144.)
• When importing a certificate and a private key. (See Import and export the certificate and private key
on page 145.)
Note
• If you are going to use SSL/TLS communication, we recommend that you contact your system
administrator before using.
• This print server stores only one pair of a certificate and a private key that you installed or previously
imported. This printer overwrites the certificate and the private key if you install a new one.
• When you reset the print server back to its default factory settings, the certificate and the private key that
are installed will be deleted. If you want to keep the same certificate and the private key after resetting the
print server, export them before resetting and re-install them. (See How to export the certificate and private
key on page 145.)
This feature can be configured using Web Based Management (web browser) only. Follow these steps to
access the configure certificate page using Web Based Management.
a
b
13
Start your web browser.
Type “http://printer’s IP address/” into your browser (where “printer’s IP address” is
the printer’s IP address or the node name).
 For example:
http://192.168.1.2/
Note
• If you have edited the hosts file on your computer or are using a Domain Name System, you can also enter
the DNS name of the print server.
• For Windows® users, as the print server supports TCP/IP and NetBIOS names, you can also enter the
NetBIOS name of the print server. The NetBIOS name can be seen on the Network Configuration List. To
learn how to print the Network Configuration List, see Printing the Network Configuration List on page 80.
The NetBIOS name assigned is the first 15 characters of the node name and by default it will appear as
“BRNxxxxxxxxxxxx" for a wired network or "BRWxxxxxxxxxxxx" for a wireless network.
131
Security features
c
d
e
f
g
Click Network Configuration.
Enter a user name and a password. The default User Name is “admin” and the default Password is
“access”.
Click OK.
Click Configure Certificate.
You can configure the certificate settings from the screen below.
Note
• The functions that are grayed and unlinked indicate they are not available.
• For more information on configuration, see the Help text in the Web Based Management.
Creating and installing a self-signed certificate
13
13
How to create and install a self-signed certificate
a
b
13
Click Create Self-Signed Certificate on the Configure Certificate page.
Enter a Common Name and a Valid Date, then click Submit.
Note
• The length of the Common Name is less than 64 bytes. Enter an identifier such as an IP address, node
name or domain name to use when accessing this printer through SSL/TLS communication. The node
name is displayed by default.
• A warning will pop-up if you use the IPPS or HTTPS protocol and enter a different name in the URL than
the Common Name that was used for the self-signed certificate.
c
Now the self-signed certificate is created successfully.
132
Security features
d
e
f
Follow the on-screen instructions to configure the other security settings.
Restart the printer to activate the configuration.
Now the self-signed certificate is saved in your printer memory. To use SSL/TLS communication, the
self-signed certificate also needs to be installed on your computer. Proceed to the next section.
How to install the self-signed certificate on your computer
13
Note
The following steps are for Microsoft® Internet Explorer®. If you use another web browser, follow the help
text of the web browser itself.
For Windows Vista® and Windows® 7 users that have administrator rights
a
Click the
b
Right-click Internet Explorer, and then click Run as administrator.
13
button and All Programs.
13
Note
When the User Account Control screen appears,
(Windows Vista®) click Continue.
(Windows® 7) click Yes.
133
Security features
c
Type “https://printer’s IP address/” into your browser to access your printer (where
“printer’s IP address” is the printer’s IP address or the node name).
Then, click Continue to this website (not recommended).
d
Click Certificate Error, and then click View certificates. For the rest of the instructions, follow the steps
from d on page 141.
13
134
Security features
For Windows Vista® and Windows® 7 users that do not have administrator rights
13
a
Click the
b
Right click Internet Explorer, and then click Run as administrator.
c
Choose the Administrator that you want to install with and enter the administrator password, and then
click OK or Yes.
button and All Programs.
13
135
Security features
d
Type “https://printer’s IP address/” into your browser to access your printer (where
“printer’s IP address” is the printer’s IP address or the node name).
Then, click Continue to this website (not recommended).
e
Click Certificate Error, and then click View certificates.
13
f
Choose the Details tab, and then click Copy to File....
136
Security features
g
Click Next.
h
Make sure that DER encoded binary X.509 (.CER) is chosen, and then click Next.
i
Click Browse....
13
137
Security features
j
Click Browse Folders.
k
Choose a folder you want to save the certificate file in and enter a file name, and then click Save.
Note
If you choose Desktop, the certificate file is saved to the Desktop of the Administrator that you chose.
l
Click Next.
13
138
Security features
m
Click Finish.
n
Click OK.
o
Click OK.
13
139
Security features
p
Open the folder that you saved the certificate file in k and double-click the certificate file. For the rest of
the instructions, follow the steps from d on page 141.
For Windows® 2000/XP and Windows Server® 2003/2008 users
a
b
Start your web browser.
c
When the following dialog appears, click View Certificate.
13
Type “https://printer’s IP address/” into your browser to access your printer (where
“printer’s IP address” is the IP address or the node name that you assigned for the certificate).
13
140
Security features
d
Click Install Certificate... from the General tab.
e
When the Certificate Import Wizard appears, click Next.
13
141
Security features
f
Choose Place all certificates in the following store and then, click Browse....
g
Choose Trusted Root Certification Authorities and then, click OK.
h
Click Next.
13
142
Security features
i
Click Finish.
j
Click Yes, if the fingerprint (thumbprint) is correct.
Note
The fingerprint (thumbprint) is printed on the Network Configuration List. (To learn how to print the Network
Configuration List, see Printing the Network Configuration List on page 80.)
k
Click OK.
l
Now the self-signed certificate is installed on your computer, and the SSL/TLS communication is
available.
13
143
Security features
Creating CSR and installing a certificate
13
How to create the CSR
a
b
13
Click Create CSR on the Configure Certificate page.
Enter a Common Name and your information, such as Organization. Then click Submit.
Note
• We recommend that the Root Certificate from the CA be installed on your computer before creating the
CSR.
• The length of the Common Name is less than 64 bytes. Enter an identifier such as an IP address, node
name or domain name to use when accessing this printer through SSL/TLS communication. The node
name is displayed by default. The Common Name is required.
• A warning will pop-up if you enter a different name in the URL than the Common Name that was used for
the certificate.
• The length of the Organization, the Organization Unit, the City/Locality and the State/Province is less
than 64 bytes.
• The Country/Region should be an ISO 3166 country code composed of two characters.
c
d
When the contents of the CSR appear, click Save to save the CSR file to your computer.
Now the CSR is created.
Note
• Follow your CA policy regarding the method to send a CSR to your CA.
• If you are using Enterprise root CA of Windows Server® 2003/2008, we recommend using the
Web Server Certificate Template when creating the certificate. For more information, visit us at
http://solutions.brother.com/.
How to install the certificate to your printer
13
When you receive the certificate from a CA, follow the steps below to install it into the print server.
Note
Only a certificate issued with this printer’s CSR can be installed.
a
b
c
d
e
f
Click Install Certificate on the Configure Certificate page.
Specify the file of the certificate that has been issued by a CA, and then click Submit.
Now the certificate is created successfully.
Follow the on-screen instructions to configure the other security settings.
Restart the printer to activate the configuration.
Now the certificate is saved in your printer. To use SSL/TLS communication, the Root Certificate from
the CA needs to be installed on your computer. Contact your network administrator about installation.
144
13
Security features
Import and export the certificate and private key
13
How to import the certificate and private key
a
b
c
d
e
f
g
Click Import Certificate and Private Key on the Configure Certificate page.
Specify the file that you want to import.
Enter the password if the file is encrypted, and then click Submit.
Now the certificate and private key are imported successfully.
Follow the on-screen instructions to configure the other security settings.
Restart the printer to activate the configuration.
Now the certificate and private key are imported to your printer. To use SSL/TLS communication, the
Root Certificate from the CA needs to also be installed on your computer. Contact your network
administrator about the installation.
How to export the certificate and private key
a
b
13
13
Click Export Certificate and Private Key on the Configure Certificate page.
Enter the password if you want to encrypt the file.
Note
If a blank password is used, the output is not encrypted.
c
d
e
Enter the password again for confirmation, and then click Submit.
Specify the location where you want to save the file.
Now the certificate and private key are exported to your computer.
13
Note
You can import the file that you exported.
145
14
Troubleshooting
14
Overview
14
This chapter explains how to resolve typical network problems you may encounter when using the machine.
If after reading this chapter, you are unable to resolve your problem, please visit the Brother Solutions Center
at: http://solutions.brother.com/
This chapter is divided into the following sections:
 General problems
 Network print software installation problems
 Printing problems
 Scanning and PC Fax problems
 Protocol-specific troubleshooting
 Wireless network specific troubleshooting (For MFC-9320CW)
14
146
Troubleshooting
General problems
14
CD-ROM is inserted, but does not start automatically
14
If your computer does not support Autorun, the menu will not start automatically after inserting the CD-ROM.
In this case, execute Start.exe in the root directory of the CD-ROM.
How to reset the Brother print server back to the factory default
14
You can reset the print server back to its factory default settings (resetting all information such as the
password and IP address information). (See Restoring the network settings to factory default on page 79.)
My computer cannot find the machine/print server.
I cannot make a necessary connection to the machine/print server.
My machine/print server does not appear in the window of Remote Setup, BRAdmin Light or
BRAdmin Professional.
14
 For Windows®
The Firewall setting on your computer may be rejecting the necessary network connection to the machine.
In this case, you will need to disable the Firewall on your computer and install the drivers again.
Windows® XP SP2 or greater users:
a
b
c
d
14
Click the Start button, Control Panel, Network and Internet Connections.
Click Windows Firewall.
Click the General tab. Make sure that Off (not recommended) is selected.
Click OK.
Note
After the Brother software package is installed, enable your Firewall again.
Windows® 7 users:
14
Click the
button, Control Panel, System and Security and then Windows Firewall. Make sure the
Windows Firewall state is set to off.
147
14
Troubleshooting
Windows Vista® users:
a
Click the
button, Control Panel, Network and Internet, Windows Firewall and click
Change settings.
b
When the User Account Control screen appears, do the following.
14
 Users who have administrator rights: Click Continue.
 For users who do not have administrator rights: Enter the administrator password and click OK.
c
d
Click the General tab. Make sure that Off (not recommended) is selected.
Click OK.
Note
After the Brother software package is installed, enable your Firewall again.
 Macintosh
Choose your machine again in the DeviceSelector application located in Mac OS X or Macintosh HD
(Startup Disk) / Library / Printers / Brother / Utilities / DeviceSelector or from the model pop-up menu
of ControlCenter2.
14
148
Troubleshooting
Network print software installation problems
14
The Brother print server is not found during the setup of the network print software or from the
installation of the printer driver of the Brother machine in Windows®.
The Brother print server is not found using the Simple Network Configuration capabilities of
Mac OS X.
14
 For a network with an Ethernet cable connection
Make sure you have completed the IP address setting of the Brother print server according to Chapter 2
of this User’s Guide before installing the network print software or printer driver.
 For a wireless network
Make sure you have completed the IP address setting and wireless network settings of the Brother print
server according to Chapter 3 of this User’s Guide before installing the network print software or printer
driver.
Check the following:
a
b
Make sure that the machine is powered on, is on-line and ready to print.
Check the connection status for your network.
For wired network users:
14
Check to see if there is any LED activity. Brother print servers have two LEDs on the back panel of the
machine. The upper orange LED shows Speed status. The lower green LED shows Link/Activity
(Received/Transmit) status.
 The upper LED is orange: The Speed LED will be orange if the print server is connected to a
100BASE-TX Fast Ethernet network.
 The upper LED is off: The Speed LED will be off if the print server is connected to a 10BASE-T
Ethernet network.
 The lower LED is green: The Link/Activity LED will be green if the print server is connected to a
Ethernet network.
 The lower LED is off: The Link/Activity LED will be off if the print server is not connected to the
network.
14
149
Troubleshooting
For wireless network users (MFC-9320CW only):
14
Note
Make sure that your machine setting for a wireless network is ON.
Check to see if the wireless signal on the LCD display is following in Ready mode or Sleep mode with
infrastructure mode:
(Strong) /
(Medium) /
(Weak)
Your machine is connected to the wireless network.
If the signal is (None), your machine is not connected to the wireless network. To configure your
machine for a wireless network, see Configuring your machine for a wireless network (For
MFC-9320CW) on page 21.
Note
If you attempt to connect to any network (Ad-hoc or Infrastructure Mode) using open system authentication
the wireless signal strength indicator will show a full signal even if the machine cannot connect.
c
Print the Network Configuration List and check if the settings such as IP address settings are correct for
your network. The problem may be the result of a mismatched or duplicate IP address. Verify that the IP
address is correctly loaded into the print server, and make sure that no other nodes on the network have
this IP address. (For information on how to print the Network Configuration List, see Printing the Network
Configuration List on page 80.)
d
Verify that the print server is on your network as follows:
 For Windows®
Try pinging the print server from the host operating system command prompt with the command:
Click Start, All Programs 1, Accessories then choose Command Prompt.
1
Programs for Windows® 2000 users
ping ipaddress
Where ipaddress is the print server IP address (note that in some instances it can take up to two
minutes for the print server to load its IP address after setting the IP address).
 For Mac OS X 10.3.9 or greater
1
From the Go menu, choose Applications.
2
Open the Utilities folder.
3
Double click the Terminal icon.
4
Try pinging the print server from the Terminal window:
14
ping ipaddress
Where ipaddress is the print server IP address (note that in some instances it can take up to
two minutes for the print server to load its IP address after setting the IP address).
150
Troubleshooting
e
If you have tried step a to step d above and it does not work, then reset the print server back to the
default factory settings and try from the initial setup again. (For information on how to reset to the default
factory settings, see Restoring the network settings to factory default on page 79.)
f
(For Windows®)
If the installation failed, the Firewall on your computer may be blocking the necessary network
connection to the machine. In this case, you will need to disable the Firewall on your computer and reinstall the drivers. (For how to disable the Firewall, see General problems on page 147.) If you are using
personal Firewall software, see the user’s guide for your software or contact the software manufacturer.
14
151
Troubleshooting
Printing problems
14
Print job is not printed
14
Check the status and configuration of the print server.
a
b
Make sure that the machine is powered on, is on-line and ready to print.
c
Verify that the print server is on your network as follows:
Print the Network Configuration List of the machine and check if the settings such as IP address settings
are correct for your network. The problem may be the result of mismatched or duplicate IP address.
Verify that the IP address is correctly loaded into the print server, and make sure that no other nodes on
the network have this IP address. (For information on how to print the Network Configuration List, see
Printing the Network Configuration List on page 80.)
 For Windows®
1
Try pinging the print server from the host operating system command prompt with the command:
ping ipaddress
Where ipaddress is the print server IP address (note that in some instances it can take up to
two minutes for the print server to load its IP address after setting the IP address).
2
If a successful response is received, then proceed to Windows® 2000/XP, Windows Vista®,
Windows® 7 and Windows Server® 2003/2008 IPP troubleshooting on page 157. Otherwise,
proceed to step d.
 For Mac OS X 10.3.9 or greater
1
From the Go menu, choose Applications.
2
Open the Utilities folder.
3
Double click the Terminal icon.
4
Try pinging the print server from the Terminal window:
14
ping ipaddress
Where ipaddress is the print server IP address (note that in some instances it can take up to
two minutes for the print server to load its IP address after setting the IP address).
d
If you have tried step a to step c above and it does not work, then reset the print server back to the
default factory settings and try from the initial setup again. (For information how to reset to the default
factory settings, see Restoring the network settings to factory default on page 79.)
Error during printing
14
If you try to print while other users are printing large amounts of data (e.g. many pages or color pages with a
large amount of graphics at high resolution), the printer is unable to accept your print job until the ongoing
printing is finished. If the waiting time of your print job exceeds a certain limit, a time out situation occurs, which
causes the error message. In such situations, execute the print job again after the other jobs are completed.
152
Troubleshooting
Scanning and PC Fax problems
14
The network scanning feature does not work in Windows®
The network PC Fax feature does not work in Windows®
14
Firewall settings on your PC may be rejecting the necessary network connection. Follow the instructions
below to disable the Firewall. If you are using personal Firewall software, see the user’s guide for your
software or contact the software manufacturer.
Windows® XP SP2 or greater users:
a
Click the Start button, Control Panel, Network and Internet Connections and then
Windows Firewall. Make sure that Windows Firewall on the General tab is set to On.
b
c
d
Click the Advanced tab and Settings... button.
e
f
g
h
14
Click the Add button.
To add port 54925 for network scanning, enter the information below:
1. In Description of service: Enter any description, for example, “Brother Scanner”.
2. In Name or IP address (for example 192.168.0.12) or the computer hosting this service on your
network: Enter “Localhost”.
3. In External Port Number for this service: Enter “54925”.
4. In Internal Port number for this service: Enter “54925”.
5. Make sure UDP is selected.
6. Click OK.
Click the Add button.
To add port 54926 for network PC Fax, enter the information below:
1. In Description of service: Enter any description, for example, “Brother PC Fax”.
2. In Name or IP address (for example 192.168.0.12) or the computer hosting this service on your
network: Enter “Localhost”.
3. In External Port Number for this service: Enter “54926”.
4. In Internal Port number for this service: Enter “54926”.
5. Make sure UDP is selected.
6. Click OK.
If you still have trouble with your network connection, click the Add button.
To add port 137 for network scanning, network printing and network PC Fax receiving, enter the
information below:
1. In Description of service: Enter any description, for example, “Brother PC Fax receiving”.
2. In Name or IP address (for example 192.168.0.12) or the computer hosting this service on your
network: Enter “Localhost”.
3. In External Port Number for this service: Enter “137”.
4. In Internal Port number for this service: Enter “137”.
5. Make sure UDP is selected.
6. Click OK.
153
14
Troubleshooting
i
Make sure if the new setting is added and is checked, and then click OK.
Note
After the Brother software package is installed, enable your Firewall again.
Windows Vista® users:
a
Click the
button, Control Panel, Network and Internet, Windows Firewall and click
Change settings.
b
When the User Account Control screen appears, do the following.
14
 Users who have administrator rights: Click Continue.
 For users who do not have administrator rights: Enter the administrator password and click OK.
c
d
e
f
g
h
i
j
Make sure that on (recommended) is selected on the General tab.
Click the Exceptions tab.
Click the Add port... button.
To add port 54925 for network scanning, enter the information below:
1. In Name: Enter any description, for example, “Brother Scanner”.
2. In Port number: Enter “54925”.
3. Make sure UDP is selected.
4. Click OK.
Click the Add port... button.
To add port 54926 for network PC Fax, enter the information below:
1. In Name: Enter any description, for example, “Brother PC Fax”.
2. In Port number: Enter “54926”.
3. Make sure UDP is selected.
4. Click OK.
Make sure that the new setting is added and is checked, and then click Apply.
14
If you still have trouble with your network connection such as network scanning or printing, check
File and Printer Sharing box in the Exceptions tab and then click Apply.
Note
After the Brother software package is installed, enable your Firewall again.
154
Troubleshooting
Windows® 7 users:
a
Click the
button, Control Panel, System and Security and then Windows Firewall.
Make sure the Windows Firewall state is set to On.
b
c
d
e
f
Click Advanced settings. The Windows Firewall with Advanced Security window appears.
14
Click Inbound Rules.
Click New Rule.
Choose Port and click Next.
To add a port enter the information below:
 For network scanning
Choose UDP and enter “54925” in the Specific local ports:.
Click Next.
 For network PC-Fax
Choose UDP and enter “54926” in the Specific local ports:.
Click Next.
g
h
i
j
k
l
m
n
Choose Allow the connection and click Next.
Check the applicable items and click Next.
Enter any description in Name: (for example “Brother Scanner” or “Brother PC-Fax”) and click Finish.
Make sure that the new setting is added and is checked.
Click Outbound Rules.
Click New Rule.
Choose Port and click Next.
To add port enter the information below:
 For network scanning
14
Choose UDP and enter “54925” in the Specific remote ports:.
Click Next.
 For network PC-Fax
Choose UDP and enter “54926” in the Specific remote ports:.
Click Next.
o
p
q
r
Choose Allow the connection and click Next.
Check the applicable items and click Next.
Enter any description in Name: (for example “Brother Scanner” or “Brother PC-Fax”) and click Finish.
Make sure that the new setting is added and is checked.
155
Troubleshooting
Wireless network troubleshooting (For MFC-9320CW)
14
Wireless connection problem
14
The wireless network connection is sometimes disabled.
14
The wireless network connection status is affected by the environment where the Brother printer and other
wireless devices are located. The following conditions may cause connection problems:
 A concrete or metal framed wall is installed between the Brother machine and the access point/router.
 Electric appliances such as televisions, computer appliances, microwave ovens, intercoms,
mobile/cellular phones and the battery chargers and AC power adapters are installed close to your
network.
 A broadcast station or high-tension wire is located close to your network.
 A nearby fluorescent light is being switched on or off.
14
156
Troubleshooting
Protocol-specific troubleshooting
14
Windows® 2000/XP, Windows Vista®, Windows® 7 and Windows Server®
2003/2008 IPP troubleshooting
14
I want to use a different Port number other than 631.
14
If you are using Port 631 for IPP printing, you may find that your firewall may not let the print data through. If
this is the case, use a different port number (port 80), or configure your Firewall to allow Port 631 data
through.
To send a print job using IPP to a printer using Port 80 (the standard HTTP port) enter the following when
configuring your Windows® 2000/XP, Windows Vista®, Windows® 7 and Windows Server® 2003/2008
system.
http://ipaddress/ipp/
The “Go to printer’s Web site” option in Windows® XP, Windows Vista® and Windows® 7 is not
working
The “Get More Info” option in Windows® 2000 and Windows Server® 2003/2008 is not working
14
If you are using a URL of:
http://ipaddress:631/ or http://ipaddress:631/ipp/
the Get More Info option in Windows® 2000/XP, Windows Vista®, Windows® 7 and Windows Server®
2003/2008 will not function. If you wish to use the Get More Info option, use the following URL:
http://ipaddress/
This will then force Windows® 2000/XP, Windows Vista®, Windows® 7 and Windows Server® 2003/2008 to
use Port 80 to communicate with the Brother print server.
Web Based Management (web browser) troubleshooting (TCP/IP)
14
a
If you cannot connect to the print server using your web browser it may be worth checking the Proxy
Settings of your browser. Look in the Exceptions setting and if necessary, type in the IP address of the
print server. This will stop your computer from trying to connect to your ISP or proxy server every time
you wish to look at the print server.
b
Make sure that you are using the correct web browser, we recommend Microsoft® Internet Explorer® 6.0
(or greater) or Firefox 1.0 (or greater) for Windows® and Safari 1.3 (or greater) for Macintosh. Please
also make sure that JavaScript and Cookies are always enabled in whichever browser you use. If a
different web browser is used, make sure it is compatible with HTTP 1.0 and HTTP 1.1.
157
14
A
Appendix A
A
Using services
A
A service is a resource that can be accessed by computers that wish to print to the Brother print server. The
Brother print server provides the following predefined services (do a SHOW SERVICE command in the
Brother print server remote console to see a list of available services): Enter HELP at the command prompt
for a list of supported commands.
Service (Example)
Definition
BINARY_P1
TCP/IP binary
TEXT_P1
TCP/IP text service (adds carriage return after each line feed)
PCL_P1
PCL service (switches PJL-compatible printer to PCL mode)
BRNxxxxxxxxxxxx
TCP/IP binary
BRNxxxxxxxxxxxx_AT
PostScript® service for Macintosh
POSTSCRIPT_P1
PostScript® service (switches PJL-compatible printer to PostScript® mode)
Where “xxxxxxxxxxxx” is your machine’s MAC Address (Ethernet Address).
A
158
Appendix A
Other ways to set the IP address (for advanced users and
administrators)
A
For information on how to configure your machine for a network using the BRAdmin Light utility, see Setting
the IP address and subnet mask on page 15.
Using DHCP to configure the IP address
A
The Dynamic Host Configuration Protocol (DHCP) is one of several automated mechanisms for IP address
allocation. If you have a DHCP server in your network, the print server will automatically obtain its IP address
from the DHCP server and register its name with any RFC 1001 and 1002-compliant dynamic name services.
Note
If you do not want your print server configured via DHCP, BOOTP or RARP, you must set the Boot Method
to static so that the print server has a static IP address. This will prevent the print server from trying to
obtain an IP address from any of these systems. To change the Boot Method, use the machine’s control
panel Network menu, BRAdmin applications, Remote Setup or Web Based Management (web browser).
Using BOOTP to configure the IP address
A
BOOTP is an alternative to RARP that has the advantage of allowing configuration of the subnet mask and
gateway. In order to use BOOTP to configure the IP address make sure that BOOTP is installed and running
on your host computer (it should appear in the /etc/services file on your host as a real service; type
man bootpd or refer to your system documentation for information). BOOTP is usually started up via the
/etc/inetd.conf file, so you may need to enable it by removing the “#” in front of the bootp entry in that
file. For example, a typical bootp entry in the /etc/inetd.conf file would be:
#bootp dgram udp wait /usr/etc/bootpd bootpd -i
Depending on the system, this entry might be called “bootps” instead of “bootp”.
Note
In order to enable BOOTP, simply use an editor to delete the “#” (if there is no “#”, then BOOTP is already
enabled). Then edit the BOOTP configuration file (usually /etc/bootptab) and enter the name, network
type (1 for Ethernet), MAC Address (Ethernet Address) and the IP address, subnet mask and gateway of
the print server. Unfortunately, the exact format for doing this is not standardized, so you will need to refer
to your system documentation to determine how to enter this information (many UNIX systems also have
template examples in the bootptab file that you can use for reference). Some examples of typical
/etc/bootptab entries include: (“BRN” below is “BRW” for a wireless network.)
BRN310107 1
00:80:77:31:01:07 192.168.1.2
and:
BRN310107:ht=ethernet:ha=008077310107:\ip=192.168.1.2:
Certain BOOTP host software implementations will not respond to BOOTP requests if you have not included
a download filename in the configuration file. If this is the case, simply create a null file on the host and specify
the name of this file and its path in the configuration file.
As with RARP, the print server will load its IP address from the BOOTP server when the printer is powered on.
159
A
Appendix A
Using RARP to configure the IP address
A
The Brother print server’s IP address can be configured using the Reverse ARP (RARP) facility on your host
computer. This is done by editing the /etc/ethers file (if this file does not exist, you can create it) with an
entry similar to the following:
00:80:77:31:01:07
BRN008077310107 (or BRW008077310107 for a wireless network)
Where the first entry is the MAC Address (Ethernet Address) of the print server and the second entry is the
name of the print server (the name must be the same as the one you put in the /etc/hosts file).
If the RARP daemon is not already running, start it (depending on the system the command can be rarpd,
rarpd -a, in.rarpd -a or something else; type man rarpd or refer to your system documentation for
additional information). To verify that the RARP daemon is running on a Berkeley UNIX based system, type
the following command:
ps -ax | grep -v grep | grep rarpd
For AT&T UNIX-based systems, type:
ps -ef | grep -v grep | grep rarpd
The Brother print server will get the IP address from the RARP daemon when the printer is powered on.
Using APIPA to configure the IP address
A
The Brother print server supports the Automatic Private IP Addressing (APIPA) protocol. With APIPA, DHCP
clients automatically configure an IP address and subnet mask when a DHCP server is not available. The
device chooses it's own IP address in the range 169.254.1.0 through to 169.254.254.255. The subnet mask
is automatically set to 255.255.0.0 and the gateway address is set to 0.0.0.0.
By default, the APIPA protocol is enabled. If you want to disable the APIPA protocol, you can disable it using
control panel of the machine. (For more information, see APIPA on page 58.)
Using ARP to configure the IP address
A
If you are unable to use the BRAdmin application and your network does not use a DHCP server, you can
also use the ARP command. The ARP command is available on Windows® systems that have TCP/IP
installed as well as UNIX systems. To use ARP enter the following command at the command prompt:
arp -s ipaddress ethernetaddress
ping ipaddress
Where ethernetaddress is the MAC Address (Ethernet Address) of the print server and ipaddress is
the IP address of the print server. For example:
160
A
Appendix A
 Windows® systems
Windows® systems require the dash “-” character between each digit of the MAC Address (Ethernet
Address).
arp -s 192.168.1.2 00-80-77-31-01-07
ping 192.168.1.2
 UNIX/Linux systems
Typically, UNIX and Linux systems require the colon “:” character between each digit of the MAC Address
(Ethernet Address).
arp -s 192.168.1.2 00:80:77:31:01:07
ping 192.168.1.2
Note
You must be on the same Ethernet segment (that is, there cannot be a router between the print server and
operating system) to use the arp -s command.
If there is a router, you may use BOOTP or other methods described in this chapter to enter the IP address.
If your administrator has configured the system to deliver IP addresses using BOOTP, DHCP or RARP
your Brother print server can receive an IP address from any one of these IP address allocation systems.
In which case, you will not need to use the ARP command. The ARP command only works once. For
security reasons, once you have successfully configured the IP address of a Brother print server using the
ARP command, you cannot use the ARP command again to change the address. The print server will
ignore any attempts to do this. If you wish to change the IP address again, use a Web Based Management
(web browser), TELNET (using the SET IP ADDRESS command) or factory reset the print server (which
will then allow you to use the ARP command again).
A
161
Appendix A
Using the TELNET console to configure the IP address
A
You can also use the TELNET command to change the IP address.
TELNET is an effective method to change the machine’s IP address. But a valid IP address must already be
programmed into the print server.
Type TELNET <command line> at the command prompt of the system prompt, where <command line>
is the IP address of the print server. When you are connected, push the Return or Enter key to get the “#”
prompt. Enter the password “access” (the password will not appear on the screen).
You will be prompted for a user name. Enter anything in response to this prompt.
You will then get the Local> prompt. Type SET IP ADDRESS ipaddress, where ipaddress is the
desired IP address you wish to assign to the print server (check with your network administrator for the IP
address to use). For example:
Local> SET IP ADDRESS 192.168.1.3
You will now need to set the subnet mask by typing SET IP SUBNET subnet mask, where subnet mask
is the desired subnet mask you wish to assign to the print server (check with your network administrator for
the subnet mask to use). For example:
Local> SET IP SUBNET 255.255.255.0
If you do not have any subnets, use one of the following default subnet masks:
255.0.0.0 for class A networks
255.255.0.0 for class B networks
255.255.255.0 for class C networks
The leftmost group of digits in your IP address can identify the type of network you have. The value of this
group ranges from 1 through 127 for Class A networks (e.g., 13.27.7.1), 128 through 191 for Class B networks
(e.g.,128.10.1.30), and 192 through 255 for Class C networks (e.g., 192.168.1.4).
If you have a gateway (router), enter its address with the command SET IP ROUTER routeraddress,
where routeraddress is the desired IP address of the gateway you wish to assign to the print server. For
example:
Local> SET IP ROUTER 192.168.1.4
Type SET IP METHOD STATIC to set the method of IP access configuration to static.
To verify that you have entered the IP information correctly, type SHOW IP.
Type EXIT or Ctrl-D (i.e., hold down the control key and type “D”) to end the remote console session.
A
162
Appendix A
Using the Brother Web BRAdmin server software for IIS to configure the IP
address
A
The Web BRAdmin server software is designed to manage all LAN/WAN Brother network connected devices.
By installing the Web BRAdmin server software on a computer running IIS 1, administrators with a web
browser can connect to the Web BRAdmin server, which then communicates with the device itself. Unlike the
BRAdmin Professional utility, which is designed for Windows® systems only, the Web BRAdmin server
software can be accessed from any client computer with a web browser that supports Java.
Please note this software is not included on the CD-ROM that was supplied with your Brother product.
Please visit http://solutions.brother.com/ to learn more about this software and to download it.
1
Internet Information Server 4.0 or Internet Information Services 5.0/5.1/6.0/7.0
A
163
Appendix A
Installation when using web services
(For Windows Vista® and Windows® 7 users)
A
The steps may vary depending on your operating system.
Note
• You must configure the IP address on your machine before you proceed with this section. If you have not
configured the IP address, see Setting the IP address and subnet mask on page 15.
• Verify the host computer and print server are either on the same subnet, or that the router is properly
configured to pass data between the two devices.
a
Click the
b
The machine’s Web Services Name will be shown with the printer icon. Right-click the machine you want
to install.
button and then choose Network.
Note
The Web Services Name for the Brother machine is your model name and the MAC Address (Ethernet
Address) of your machine (e.g. Brother MFC-XXXX (model name) [XXXXXX] (MAC Address / Ethernet
Address)).
c
d
Click Install.
When the User Account Control screen appears, do the following.
 Users who have administrator rights: Click Continue or Yes.
 For users who do not have administrator rights: Enter the administrator password and click OK or
Yes.
e
f
g
h
Choose Locate and install driver software (recommended).
Insert Brother CD-ROM.
Choose Browse my computer for driver software (advanced) on your computer.
Choose your CD-ROM drive and then the driver \ 32 1 \ your language folder.
Click OK.
1
i
A
32 folder for 32-bit OS users and 64 for 64-bit OS users
Click Next to begin installation.
164
Appendix A
Installation when using a Network Print Queue or Share
(printer driver only)
A
Note
If you are going to connect to a shared printer on your network, we recommend that you ask your system
administrator about the queue or share name for the printer prior to installation.
a
b
c
d
e
f
g
Start the CD-ROM installation menu program according to the Quick Setup Guide.
Choose the model name and your language (if necessary), and then click Initial Installation.
Click Printer Driver Only (for Network).
Click Next in response to the Welcome message. Follow the on-screen instructions.
Choose Standard Installation and click Next.
Choose Network Shared Printer, and then click Next.
Choose your printer’s queue, and then click OK.
Note
Contact your administrator if you are not sure about the location and name of the printer in the network.
h
Click Finish. Setup is now complete.
A
165
B
Appendix B
B
B
Print server specifications
B
Ethernet wired network
B
Network Board
Model name
NC-6700h type2
LAN
You can connect your machine to a network for Network Printing, Network Scanning,
PC Fax and Remote Setup. 1 2
Support for
Windows® 2000 Professional, Windows® XP,
Windows® XP Professional x64 Edition, Windows Vista®, Windows® 7,
Windows Server® 2003/2008 and Windows Server® 2003 x64 Edition 2
Mac OS X 10.3.9 or greater 3
Protocols
IPv4:
ARP, RARP, BOOTP, DHCP, APIPA (Auto IP),
WINS/NetBIOS name resolution, DNS resolver, mDNS,
LLMNR responder, LPR/LPD, Custom Raw Port/Port9100, IPP/IPPS,
FTP server, FTP client, POP before SMTP, SMTP AUTH, APOP,
TELNET Server, SNMPv1/v2c/v3, HTTP/HTTPS server,
TFTP client and server, SMTP client, ICMP, Web services Print, SNTP,
CIFS Client, SSL/TLS, LLTD responder
IPv6:
(Turned off as default) NDP, RA, DNS resolver, mDNS, LLMNR responder,
LPR/LPD, Custom Raw Port/Port9100, IPP/IPPS, FTP server, FTP client,
POP before SMTP, SMTP AUTH, APOP, TELNET Server,
SNMPv1/v2c/v3, HTTP/HTTPS server, TFTP client and server,
SMTP client, ICMPv6, Web services Print, SNTP, CIFS Client, SSL/TLS,
LLTD responder
Network type
Ethernet 10/100 BASE-TX Auto Negotiation (Wired LAN)
Management
utilities
BRAdmin Light
BRAdmin Professional 3 4
Web BRAdmin 4 5
BRPrint Auditor 6
Web Based Management (web browser)
1
PC Fax Send for Mac
2
Printing only for Windows Server® 2003/2008
3
For the latest driver updates, visit http://solutions.brother.com/
4
BRAdmin Professional and Web BRAdmin are available as a download from http://solutions.brother.com/. They are for Windows® only.
5
Client computers with a web browser supporting Java.
6
Available when using BRAdmin Professional 3 or Web BRAdmin with devices that are connected to your client PC via the USB interface.
166
Appendix B
Ethernet wireless network
B
B
Network board
model name
NC-7500w type2
LAN
You can connect your machine to a network for Network Printing, Network Scanning,
PC Fax and Remote Setup 1 2.
Support for
Windows® 2000 Professional, Windows® XP,
Windows® XP Professional x64 Edition, Windows Vista®, Windows® 7, Windows
Server® 2003/2008 and Windows Server® 2003 x64 Edition
Mac OS X 10.3.9 or greater 3
Protocols
Management
utilities
IPv4:
ARP, RARP, BOOTP, DHCP, APIPA (Auto IP),
WINS/NetBIOS name resolution, DNS resolver, mDNS,
LLMNR responder, LPR/LPD, Custom Raw Port/Port9100, IPP/IPPS,
FTP server, FTP client, POP before SMTP, SMTP AUTH, APOP,
TELNET Server, SNMPv1/v2c/v3, HTTP/HTTPS server,
TFTP client and server, SMTP client, ICMP, Web services Print, SNTP,
CIFS Client, SSL/TLS, LLTD responder
IPv6:
(Turned off as default) NDP, RA, DNS resolver, mDNS,
LLMNR responder, LPR/LPD, Custom Raw Port/Port9100, IPP/IPPS,
FTP server, FTP client, POP before SMTP, SMTP AUTH, APOP,
TELNET Server, SNMPv1/v2c/v3, HTTP/HTTPS server,
TFTP client and server, SMTP client, ICMPv6, Web services Print,
SNTP, CIFS Client, SSL/TLS, LLTD responder
BRAdmin Light
BRAdmin Professional 3 4
Web BRAdmin 4 5
BRPrint Auditor 6
Web Based Management (web browser)
Network type
IEEE 802.11 b/g (Wireless LAN)
Frequency
2412-2472 MHz
RF channels
USA/Canada 1-11
Japan
802.11b: 1-14, 802.11g: 1-13
Others
1-13
Communication Infrastructure, Ad-hoc (802.11b only)
mode
Data rates
Link distance
802.11b
11/5.5/2/1 Mbps
802.11g
54/48/36/24/18/12/11/9/6/5.5/2/1 Mbps
70m (233 ft.) at lowest data rate (The distance rate will vary upon environment and other
equipment location.)
167
Appendix B
Network
security
128 (104) / 64 (40) bit WEP, WPA2-PSK (AES), WPA-PSK (TKIP/AES), LEAP (CKIP),
EAP-FAST (TKIP/AES)
Setup support
utilities
SecureEasySetup, Wi-Fi Protected Setup, AOSS™
1
PC Fax Send for Mac
2
Printing only for Windows Server® 2003/2008
3
For the latest driver updates, visit http://solutions.brother.com/
4
BRAdmin Professional and Web BRAdmin are available as a download from http://solutions.brother.com/. They are for Windows® only.
5
Client computers with a web browser supporting Java.
6
Available when using BRAdmin Professional 3 or Web BRAdmin with devices that are connected to your client PC via a USB port.
168
B
Appendix B
Function table and default factory settings
B
B
MFC-9010CN and DCP-9010CN
B
The factory settings are shown in Bold with an asterisk.
Main menu
Submenu
Menu selections
Options
4.Network
1.TCP/IP
1.Boot Method
Auto*
Static
RARP
BOOTP
DHCP
(If you choose Auto, RARP, BOOTP or DHCP, you will be
asked to enter how many times the machine tries to obtain
the IP address.)
2.IP Address
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]* 1
3.Subnet Mask
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]* 1
4.Gateway
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
5.Node Name
BRNxxxxxxxxxxxx
(up to 32 characters)
6.WINS Config
Auto*
Static
7.WINS Server
Primary
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
Secondary
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
8.DNS Server
Primary
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
Secondary
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
9.APIPA
On*
Off
169
Appendix B
Main menu
Submenu
Menu selections
Options
4.Network
1.TCP/IP
0.IPv6
On
(continued)
(continued)
2.Ethernet
B
Off*
—
Auto*
100B-FD
100B-HD
10B-FD
10B-HD
0.Network
Reset
1.Reset
1.Yes
2.No
2.Exit
1
On connection to the network, the machine will automatically set the IP address and Subnet Mask to values appropriate for your network.
MFC-9120CN
B
The factory settings are shown in Bold with an asterisk.
Main menu
Submenu
Menu selections
Options
5.Network
1.TCP/IP
1.Boot Method
Auto*
Static
RARP
BOOTP
DHCP
(If you choose Auto, RARP, BOOTP or DHCP, you will be
asked to enter how many times the machine tries to obtain
the IP address.)
2.IP Address
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]* 1
3.Subnet Mask
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]* 1
4.Gateway
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
5.Node Name
BRNxxxxxxxxxxxx
(up to 32 characters)
6.WINS Config
Auto*
Static
170
Appendix B
Main menu
Submenu
Menu selections
Options
5.Network
1.TCP/IP
7.WINS Server
Primary
(continued)
(continued)
B
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
Secondary
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
8.DNS Server
Primary
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
Secondary
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
9.APIPA
On*
Off
0.IPv6
On
Off*
2.Ethernet
—
Auto*
100B-FD
100B-HD
10B-FD
10B-HD
3.Scan To
FTP
—
Color 100 dpi*
(If you choose Color option)
Color 200 dpi
PDF*
Color 300 dpi
Secure PDF
Color 600 dpi
JPEG
Gray 100 dpi
XPS
Gray 200 dpi
(If you choose Gray option)
Gray 300 dpi
PDF*
B&W 200 dpi
Secure PDF
B&W 200x100 dpi
JPEG
XPS
(If you choose B&W option)
PDF*
Secure PDF
TIFF
171
Appendix B
Main menu
Submenu
Menu selections
Options
5.Network
4.ScanTo
Network
—
Color 100 dpi*
(If you choose Color option)
Color 200 dpi
PDF*
Color 300 dpi
Secure PDF
Color 600 dpi
JPEG
Gray 100 dpi
XPS
Gray 200 dpi
(If you choose Gray option)
Gray 300 dpi
PDF*
B&W 200 dpi
Secure PDF
B&W 200x100 dpi
JPEG
(continued)
B
XPS
(If you choose B&W option)
PDF*
Secure PDF
TIFF
5.Time Zone —
—
UTC+XX:XX
UTC-XX:XX
0.Network
Reset
1.Reset
2.No
2.Exit
1
1.Yes
—
On connection to the network, the machine will automatically set the IP address and Subnet Mask to values appropriate for your network.
172
Appendix B
MFC-9120CN (Internet Fax and Scan to E-mail Server available as a download)
B
B
Note
In order to use this function, please download the necessary firmware from the download page on the
Brother Solutions Center website. (http://solutions.brother.com/)
The factory settings are shown in Bold with an asterisk.
Main menu
Submenu
Menu selections
Options
5.Network
1.TCP/IP
1.Boot Method
Auto*
Static
RARP
BOOTP
DHCP
(If you choose Auto, RARP, BOOTP or DHCP, you will be
asked to enter how many times the machine tries to obtain
the IP address.)
2.IP Address
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]* 1
3.Subnet Mask
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]* 1
4.Gateway
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
5.Node Name
BRNxxxxxxxxxxxx
(up to 32 characters)
6.WINS Config
Auto*
Static
7.WINS Server
Primary
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
Secondary
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
8.DNS Server
Primary
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
Secondary
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
173
Appendix B
Main menu
Submenu
Menu selections
Options
5.Network
1.TCP/IP
9.APIPA
On*
(continued)
(continued)
B
Off
0.IPv6
On
Off*
2.Ethernet
—
Auto*
100B-FD
100B-HD
10B-FD
10B-HD
3.E-mail/
IFAX
1.Mail Address
Name (up to 60 characters)
2.Setup Server
1.SMTP Server
Name (Up to 64 characters)
IP Address
[000-255].[000-255].
[000-255].[000-255]
2.SMTP Port
00025*
[00001-65535]
3.Auth. for SMTP
None*
SMTP-AUTH
POP bef.SMTP
4.POP3 Server
Name (Up to 64 characters)
IP Address
[000-255].[000-255].
[000-255].[000-255]
5.POP3 Port
00110*
[00001-65535]
6.Mailbox Name
(Up to 60 characters)
7.Mailbox Pwd
(Up to 32 characters)
8.APOP
On
Off*
3.Setup Mail RX 1.Auto Polling
On*
Off
2.Poll Frequency
10Min*
(01Min to 60Min)
3.Header
All
Subject+From+To
None*
174
Appendix B
Main menu
Submenu
Menu selections
5.Network
3.E-mail/
IFAX
3.Setup Mail RX 4.Del Error Mail
On*
(continued)
Off
(continued)
Options
B
(continued)
5.Notification
On
MDN
Off*
4.Setup Mail TX 1.Sender Subject
2.Size Limit
(Up to 40 characters)
On
Off*
3.Notification
On
Off*
5.Setup Relay
1.Rly Broadcast
On
Off*
2.Relay Domain
RelayXX:
Relay (01 - 10)
3.Relay Report
On
Off*
4.Scan To
E-mail
—
Color 100 dpi*
(If you choose Color option)
Color 200 dpi
PDF*
Color 300 dpi
Secure PDF
Color 600 dpi
JPEG
Gray 100 dpi
XPS
Gray 200 dpi
(If you choose Gray option)
Gray 300 dpi
PDF*
B&W 200 dpi
Secure PDF
B&W 200x100 dpi
JPEG
XPS
(If you choose B&W option)
PDF*
Secure PDF
TIFF
175
Appendix B
Main menu
Submenu
Menu selections
Options
5.Network
5.Scan To
FTP
—
Color 100 dpi*
(If you choose Color option)
Color 200 dpi
PDF*
Color 300 dpi
Secure PDF
Color 600 dpi
JPEG
Gray 100 dpi
XPS
Gray 200 dpi
(If you choose Gray option)
Gray 300 dpi
PDF*
B&W 200 dpi
Secure PDF
B&W 200x100 dpi
JPEG
(continued)
B
XPS
(If you choose B&W option)
PDF*
Secure PDF
TIFF
6.ScanTo
Network
—
Color 100 dpi*
(If you choose Color option)
Color 200 dpi
PDF*
Color 300 dpi
Secure PDF
Color 600 dpi
JPEG
Gray 100 dpi
XPS
Gray 200 dpi
(If you choose Gray option)
Gray 300 dpi
PDF*
B&W 200 dpi
Secure PDF
B&W 200x100 dpi
JPEG
XPS
(If you choose B&W option)
PDF*
Secure PDF
TIFF
7.Fax to
Server
—
—
On
Off*
8.Time Zone —
—
UTC+XX:XX
UTC-XX:XX
0.Network
Reset
1.Reset
1.Yes
2.No
2.Exit
—
176
Appendix B
MFC-9320CW
B
B
The factory settings are shown in Bold with an asterisk.
Main Menu
Submenu
7.Network 1.Wired LAN
Menu Selections
1.TCP/IP
Options
1.Boot Method
Auto*
Static
RARP
BOOTP
DHCP
(If you choose Auto, RARP, BOOTP
or DHCP, you will be asked to enter
how many times the machine tries to
obtain the IP address.)
2.IP Address
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]* 1
3.Subnet Mask
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]* 1
4.Gateway
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
5.Node Name
BRNxxxxxxxxxxxx
(up to 32 characters)
6.WINS Config
Auto*
Static
7.WINS Server
(Primary)
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
(Secondary)
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
177
Appendix B
Main Menu
Submenu
7.Network 1.Wired LAN
(continued)
(continued)
Menu Selections
1.TCP/IP
Options
8.DNS Server
(continued)
B
(Primary)
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
(Secondary)
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
9.APIPA
On*
Off
0.IPv6
On
Off*
2.Ethernet
—
Auto*
100B-FD
100B-HD
10B-FD
10B-HD
3.Set to Default
4.Wired Enable
1.Reset
—
2.Exit
—
—
On*
Off
2.WLAN
1.TCP/IP
1.Boot Method
Auto*
Static
RARP
BOOTP
DHCP
(If you choose Auto, RARP, BOOTP
or DHCP, you will be asked to enter
how many times the machine tries to
obtain the IP address.)
2.IP Address
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]* 1
3.Subnet Mask
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]* 1
4.Gateway
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
178
Appendix B
Main Menu
Submenu
Menu Selections
7.Network 2.WLAN
1.TCP/IP
(continued)
(continued)
(continued)
Options
5.Node Name
B
BRWxxxxxxxxxxxx
(up to 32 characters)
6.WINS Config
Auto*
Static
7.WINS Server
(Primary)
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
(Secondary)
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
8.DNS Server
(Primary)
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
(Secondary)
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
9.APIPA
On*
Off
0.IPv6
On
Off*
2.Setup Wizard
—
—
3.SES/WPS/AOSS
—
—
4.WPS w/PIN Code
—
—
179
Appendix B
Main Menu
Submenu
7.Network 2.WLAN
(continued)
Menu Selections
5.WLAN Status
Options
1.Status
(continued)
B
Active(11b)
Active(11g)
Wired LAN Active
WLAN OFF
Connection Fail
AOSS Active
2.Signal
Signal:Strong
Signal:Medium
Signal:Weak
Signal:None
3.SSID
—
4.Comm. Mode
Ad-hoc
Infrastructure
6.Set to Default
7.WLAN Enable
1.Reset
—
2.Exit
—
—
On
Off*
3.Scan To
FTP
—
Color 100 dpi*
(If you choose Color option)
Color 200 dpi
PDF*
Color 300 dpi
Secure PDF
Color 600 dpi
JPEG
Gray 100 dpi
XPS
Gray 200 dpi
(If you choose Gray option)
Gray 300 dpi
PDF*
B&W 200 dpi
Secure PDF
B&W 200x100 dpi
JPEG
XPS
(If you choose B&W option)
PDF*
Secure PDF
TIFF
180
Appendix B
Main Menu
Submenu
7.Network 4.ScanTo
Network
(continued)
Menu Selections
—
Options
Color 100 dpi*
(If you choose Color option)
Color 200 dpi
PDF*
Color 300 dpi
Secure PDF
Color 600 dpi
JPEG
Gray 100 dpi
XPS
Gray 200 dpi
(If you choose Gray option)
Gray 300 dpi
PDF*
B&W 200 dpi
Secure PDF
B&W 200x100 dpi
JPEG
B
XPS
(If you choose B&W option)
PDF*
Secure PDF
TIFF
5.Time Zone
—
—
UTC+XX:XX
UTC-XX:XX
0.Network
Reset
1.Reset
1.Yes
2.No
2.Exit
1
—
—
—
On connection to the network, the machine will automatically set the IP address and Subnet Mask to values appropriate for your network.
181
Appendix B
MFC-9320CW (Internet Fax and Scan to E-mail Server available as a download)
B
B
Note
In order to use this function, please download the necessary firmware from the download page on the
Brother Solutions Center website. (http://solutions.brother.com/)
The factory settings are shown in Bold with an asterisk.
Main Menu
Submenu
7.Network 1.Wired LAN
Menu Selections
1.TCP/IP
Options
1.Boot Method
Auto*
Static
RARP
BOOTP
DHCP
(If you choose Auto, RARP, BOOTP
or DHCP, you will be asked to enter
how many times the machine tries to
obtain the IP address.)
2.IP Address
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]* 1
3.Subnet Mask
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]* 1
4.Gateway
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
5.Node Name
BRNxxxxxxxxxxxx
(up to 32 characters)
6.WINS Config
Auto*
Static
7.WINS Server
(Primary)
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
(Secondary)
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
182
Appendix B
Main Menu
Submenu
7.Network 1.Wired LAN
(continued)
(continued)
Menu Selections
1.TCP/IP
Options
8.DNS Server
(continued)
B
(Primary)
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
(Secondary)
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
9.APIPA
On*
Off
0.IPv6
On
Off*
2.Ethernet
—
Auto*
100B-FD
100B-HD
10B-FD
10B-HD
3.Set to Default
4.Wired Enable
1.Reset
—
2.Exit
—
—
On*
Off
2.WLAN
1.TCP/IP
1.Boot Method
Auto*
Static
RARP
BOOTP
DHCP
(If you choose Auto, RARP, BOOTP
or DHCP, you will be asked to enter
how many times the machine tries to
obtain the IP address.)
2.IP Address
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]* 1
3.Subnet Mask
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]* 1
4.Gateway
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
183
Appendix B
Main Menu
Submenu
Menu Selections
7.Network 2.WLAN
1.TCP/IP
(continued)
(continued)
(continued)
Options
5.Node Name
B
BRWxxxxxxxxxxxx
(up to 32 characters)
6.WINS Config
Auto*
Static
7.WINS Server
(Primary)
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
(Secondary)
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
8.DNS Server
(Primary)
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
(Secondary)
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
9.APIPA
On*
Off
0.IPv6
On
Off*
2.Setup Wizard
—
—
3.SES/WPS/AOSS
—
—
4.WPS w/PIN Code
—
—
184
Appendix B
Main Menu
Submenu
7.Network 2.WLAN
(continued)
Menu Selections
5.WLAN Status
Options
1.Status
(continued)
B
Active(11b)
Active(11g)
Wired LAN Active
WLAN OFF
Connection Fail
AOSS Active
2.Signal
Signal:Strong
Signal:Medium
Signal:Weak
Signal:None
3.SSID
—
4.Comm. Mode
Ad-hoc
Infrastructure
6.Set to Default
7.WLAN Enable
1.Reset
—
2.Exit
—
—
On
Off*
3.E-mail/
IFAX
1.Mail Address
Name (Up to 60 characters)
2.Setup Server
1.SMTP Server
Name (Up to 64 characters)
IP Address
[000-255].[000-255].
[000-255].[000-255]
2.SMTP Port
00025*
[00001-65535]
3.Auth. for SMTP
None*
SMTP-AUTH
POP bef.SMTP
4.POP3 Server
Name (Up to 64 characters)
IP Address
[000-255].[000-255].
[000-255].[000-255]
5.POP3 Port
00110*
[00001-65535]
6.Mailbox Name
(Up to 60 characters)
7.Mailbox Pwd
(Up to 32 characters)
8.APOP
On
Off*
185
Appendix B
Main Menu
Submenu
7.Network 3.E-mail/
IFAX
(continued)
(continued)
Menu Selections
3.Setup Mail RX
Options
1.Auto Polling
B
On*
Off
2.Poll Frequency
10Min*
(01Min to 60Min)
3.Header
All
Subject+From+To
None*
4.Del Error Mail
On*
Off
5.Notification
On
MDN
Off*
4.Setup Mail TX
1.Sender Subject
(Up to 40 characters)
2.Size Limit
On
Off*
3.Notification
On
Off*
5.Setup Relay
1.Rly Broadcast
On
Off*
2.Relay Domain
RelayXX:
Relay (01 - 10)
3.Relay Report
On
Off*
186
Appendix B
Main Menu
Submenu
7.Network 4.Scan To
E-mail
(continued)
Menu Selections
—
Options
Color 100 dpi*
(If you choose Color option)
Color 200 dpi
PDF*
Color 300 dpi
Secure PDF
Color 600 dpi
JPEG
Gray 100 dpi
XPS
Gray 200 dpi
(If you choose Gray option)
Gray 300 dpi
PDF*
B&W 200 dpi
Secure PDF
B&W 200x100 dpi
JPEG
B
XPS
(If you choose B&W option)
PDF*
Secure PDF
TIFF
5.Scan To
FTP
—
Color 100 dpi*
(If you choose Color option)
Color 200 dpi
PDF*
Color 300 dpi
Secure PDF
Color 600 dpi
JPEG
Gray 100 dpi
XPS
Gray 200 dpi
(If you choose Gray option)
Gray 300 dpi
PDF*
B&W 200 dpi
Secure PDF
B&W 200x100 dpi
JPEG
XPS
(If you choose B&W option)
PDF*
Secure PDF
TIFF
187
Appendix B
Main Menu
Submenu
7.Network 6.ScanTo
Network
(continued)
Menu Selections
—
Options
Color 100 dpi*
(If you choose Color option)
Color 200 dpi
PDF*
Color 300 dpi
Secure PDF
Color 600 dpi
JPEG
Gray 100 dpi
XPS
Gray 200 dpi
(If you choose Gray option)
Gray 300 dpi
PDF*
B&W 200 dpi
Secure PDF
B&W 200x100 dpi
JPEG
B
XPS
(If you choose B&W option)
PDF*
Secure PDF
TIFF
7.Fax to
Server
—
8.Time Zone
—
—
On
Off*
—
UTC+XX:XX
UTC-XX:XX
0.Network
Reset
1.Reset
—
1.Yes
2.No
2.Exit
—
—
188
Appendix B
Entering Text
B
B
When setting certain menu selections, such as the E-mail address, you will need to type text characters. The
dial pad keys have letters printed on them. The keys: 0, # and l do not have printed letters because they are
used for special characters.
Press the appropriate dial pad key the required number of times to access the characters below:
 For setting an E-mail address, Scan To FTP menu options and E-mail/IFAX menu options
Press
Key
one
time
two
times
three
times
four
times
five
times
six
times
seven
times
eight
times
nine
times
1
@
.
/
1
@
.
/
1
@
2
a
b
c
A
B
C
2
a
b
3
d
e
f
D
E
F
3
d
e
4
g
h
i
G
H
I
4
g
h
5
j
k
l
J
K
L
5
j
k
6
m
n
o
M
N
O
6
m
n
7
p
q
r
s
P
Q
R
S
7
8
t
u
v
T
U
V
8
t
u
9
w
x
y
z
W
X
Y
Z
9
 For setting other menu selections
Press
Key
one
time
two
times
three
times
four
times
five
times
2
A
B
C
2
A
3
D
E
F
3
D
4
G
H
I
4
G
5
J
K
L
5
J
6
M
N
O
6
M
7
P
Q
R
S
7
8
T
U
V
8
T
9
W
X
Y
Z
9
Inserting spaces
B
To enter a space in a fax number, press c once between numbers. To enter a space in a name, press c twice
between characters.
Making corrections
B
If you entered a letter incorrectly and want to change it, press d to move the cursor to the incorrect character,
and then press Clear/Back.
189
Appendix B
Repeating letters
B
B
To enter a character on the same key as the previous character, press c to move the cursor right before
pressing the key again.
Special characters and symbols
B
Press l, # or 0, and then press d or c to move the cursor to the symbol or character you want.
Press OK to choose it. The symbols and characters below will appear depending on your menu selection.
Press l
for
(space) ! “ # $ % & ’ ( ) l + , - . / m
Press #
for
:;<=>?@[]^_\~‘|{}
Press 0
for
(For USA) É À È Ê Î Ç Ë Ö 0
(For UK) Ä Ë Ö Ü À Ç È É 0
190
C
Index
A
F
Accessories and supplies ...........................................iv
AES ........................................................................... 23
AOSS™ ....................................................... 29, 31, 60
APIPA .......................................................... 8, 58, 160
APOP ...................................................................... 123
ARP .....................................................................8, 160
Authentication ........................................................... 22
Factory default .......................................................... 79
Firewall ................................................... 147, 151, 153
FTP ........................................................................... 10
B
H
BINARY_P1 ............................................................ 158
BOOTP ........................................................ 8, 53, 159
BRAdmin Light ........................................................1, 2
BRAdmin Professional ............................... 1, 3, 15, 18
BRNxxxxxxxxxxxx ................................................... 158
BRNxxxxxxxxxxxx_AT ............................................ 158
Brother
accessories and supplies .........................................iv
Brother installer application .................................28, 29
Brother Solutions Center .....................................15, 18
HTTPS ............................................................123, 125
Hyper Text Transfer Protocol .................................... 19
C
CA ...................................................................122, 131
Certificate ........................................................122, 131
Channels ................................................................... 22
CIFS .......................................................................... 10
CKIP .......................................................................... 23
Control panel ............................................................. 19
CSR ........................................................................ 122
D
DHCP ........................................................... 8, 53, 159
Digital signature ...................................................... 122
DNS client ................................................................... 8
DNS server ............................................................... 58
Domain ................................................................91, 93
Driver Deployment Wizard ....................................1, 81
E
EAP-FAST ................................................................ 23
Encryption ................................................................. 23
G
Gateway .................................................................... 55
I
Infrastructure mode .............................................40, 42
Internet printing .....................................................1, 90
IP address ...........................................................12, 53
IPP ........................................................................9, 91
IPPS ................................................................123, 128
IPv6 .....................................................................10, 59
L
LEAP ......................................................................... 23
LLMNR ........................................................................ 9
LLTD ......................................................................... 11
LPR/LPD ..................................................................... 9
M
MAC Address 8, 15, 16, 18, 19, 46, 55, 80, 91, 93, 97,
.................................99, 102, 158, 159, 160, 161, 164
Macintosh printing ..................................................... 96
mDNS ......................................................................... 9
N
NetBIOS name resolution ........................................... 8
Network Configuration List ........................................ 80
Network Key .............................................................. 24
Network printing ........................................................ 87
Network shared printing .............................................. 6
Node name ............................................................... 55
O
Open system ............................................................. 22
Operating systems ...................................................... 1
191
C
Index
P
T
Password .................................................................. 90
PBC .............................................................. 29, 31, 60
PCL_P1 ................................................................... 158
Peer-to-Peer ............................................................... 5
PIN Method .................................................. 30, 38, 61
Ping .................................................................150, 152
POP before SMTP ..........................................123, 129
Port9100 ..................................................................... 9
POSTSCRIPT_P1 ................................................... 158
Print server setting .................................................... 18
private key ............................................................... 131
Protocol ....................................................................... 8
Public key cryptosystem ......................................... 122
TCP/IP ..................................................................8, 52
TCP/IP printing .......................................................... 87
TELNET ..............................................................9, 162
Text
entering ................................................................ 189
special characters ................................................ 190
TEXT_P1 ................................................................ 158
TKIP .......................................................................... 23
Trademarks .................................................................. i
R
RARP ........................................................... 8, 53, 160
Remote Setup .......................................................1, 20
Restoring the network settings .................................. 79
RFC 1001 ................................................................ 159
S
SecureEasySetup ........................................ 29, 31, 60
Security terms ......................................................... 122
Service .................................................................... 158
Shared key ................................................................ 22
Shared key cryptosystem ........................................ 122
Simple Network Configuration for Mac OS X .......... 149
SMTP client ................................................................. 9
SMTP-AUTH ...................................................123, 129
SNMP .......................................................................... 9
SNMPv3 ..........................................................123, 125
Specifications .......................................................... 166
SSID .......................................................................... 22
SSL/TLS ..........................................................123, 131
Status Monitor ............................................................. 1
Subnet mask .......................................................13, 54
W
Web Based Management (web browser) . 19, 124, 125
Web BRAdmin ............................................................ 3
Web server (HTTP) ................................................... 10
Web server (HTTPS) .............................................. 123
Web services ....................................................10, 164
WEP .......................................................................... 23
Wi-Fi Protected Setup ............... 29, 30, 31, 38, 60, 61
WINS ........................................................................... 9
WINS Config ............................................................. 56
WINS Server ............................................................. 57
Wireless network ....................................................... 21
WPA-PSK/WPA2-PSK .............................................. 22
192
C