Digi-Tron | ULD | User manual | Digi-Tron ULD User manual

farnell.com
element14.com
3389
Test Equipment - Environmental, HVAC & Pressure
Page
3389 Moisture Meters . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pressure & Calibration . . . . . . . . . . . . . . . . . . . . .
3419 Temperature Probes & Accessories . . . . . . . . .
3416 Process Timers . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3392 Sound Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3393 Thermal Imagers. . . . . . . . . . . . . . . . . . . . . . . . . . .
3394 Thermometers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3395 Thermometers - Non Contact (IR) . . . . . . . . . . .
3396
3398
3399
3415
3415
3401
3412
3403
3409
Calibration
Pocket Anemometer
The pocket sized meter has a lightweight low-friction ball vane
providing high accuracy at high and low air velocity. The robust case incorporates a large easy to read display and wrist
strap.
Requires 1 x PP3 battery
Calibration Services
We offer two levels of calibration on most products:
NAMAS Calibration
In addition to Standard Calibration, UKAS provides
you with:
Instruments calibrated to UKAS approved procedures
NAMAS labels
NAMAS calibration certificate
UKAS approved calibration equipment
UKAS approved, temperature-controlled testing
equipment
Ì
Ì
Ì
Ì
Ì
Range
0.4 to 30 m/s
80 to 5910 ft/min
1.4 to 108 km/hr
0.9 to 67 mph
0.8 to 58 knots
Accuracy
Standard Calibration
Instruments calibrated to manufacturers’ specification, complete with:
Calibration labels
Integrity seals
Calibration certificate
All calibration results recorded and stored for five years
Re-calibration advice
Suitability for ISO9000
Selectable m/s, fpm, mph, km/hr or knots
Easy to use push button operation
Data hold freezes current measured value
Min/Max memory since power on
Supplied with instructions for use
Resolution
0.1
1
0.1
0.1
0.1
Below 20m/s ±3%FS, above 20m/s ±4%
333717.275784
Price Each
Order Code
1+
EA3000 and EA3010
These handheld anemometers are ideal
for the outdoor professional, being water
resistant and having a backlight makes
them ideal for all weather conditions.
EA3000 features
Ì Wind speed measurement in
mph, Km/h, m/s or Knots
Ì LCD backlight
Ì Auto power off
Ì Neck band included
Ì Water resistant
EA3010 extra features
Ì Beaufort wind graph display
Ì Wind chill display
Ì Max wind speed memory
Ì Temperature display in degrees
Celsius or Fahrenheit
Anemometers
Handheld Anemometer / Thermometer
13/430/0
381131.344352
Ì Accurate measurement of windspeed and ambient temperature
Ì Windspeed measurement in m/s, ft/min, km/h, mph, knots and
Beaufort scale bargraph
Ì Windchill display
Ì NTC Thermometer with temperature display in °C or °F
Ì Backlit LCD display
Ì Auto power off
Ì Supplied with battery and neckband
Thermometer
Range
Resolution
Accuracy
Battery
Mftrs.
Price Each
List No.
Order Code
EA3000
EA3010
838-8733
838-8741
Vane Anemoneter
72-6638
A small, low cost meter that can accurately measure air velocity and wind speed in air conditioning and heating systems.
-10°C to +45°C
0.2°C
± 2°C
3V (included)
Ì 31⁄2 digit LCD
Ì Accurate ±(3% + 2 digit) air velocity measurement
Ì Measurement in ft/min, m/sec, knots and
km/hr
Ì Low-friction ball bearing wheel
Ì Includes owner manual
Ì Requires 9V battery (not included)
Ì CE marked
446666.434967
Price Each
Order Code
1+
10+
127-1858
Price Each
Standard Calibration Charge
1+
Test Equipment – Environmental, HVAC & Pressure
Handheld Anemometers
231084
0 to 30 m/s
0.1 m/s
± 5%
51
462-5869
Calibration to UKAS - UK Accreditation of Measurement and Sampling, part of UKAS (United Kingdom Accreditation Service) offers the highest industry standard of integrity
available. The service is accepted by all UK approval agencies and is also recognised in
many other countries.
The calibration of your equipment is essential wherever you must ensure accuracy of measurement. To arrange for re-calibration of your equipment contact our Value Added Services on 0870 1200 206.
Delivery
We will give you a precise delivery date at the time of your enquiry
How to Order
symbol should be ordered by their normal order code,
Products highlighted with the
followed by the standard of calibration required. Calibration is charged at the stated rate.
For all other items displaying the calibration logo, contact Value Added Services and we
will supply you with a full quotation
Anemometer
Range
Resolution
Accuracy
Power, Test and Measurement
Anemometers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Barometers, Weather Stations
& Office Products . . . . . . . . . . . . . . . . . . . . . . . . . .
Environmental Dataloggers . . . . . . . . . . . . . . . . .
Hazardous Gas & Liquid Testers . . . . . . . . . . . .
Heating & Refrigeration. . . . . . . . . . . . . . . . . . . . .
Hygrometers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Light Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Liquid Testers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Page
S
m/sec
Km/hr
H=76.2, W=38.1, L=110
Resolution
0.8 to 30.0m/sec
0.1m/sec
2.8 to 108 km/h
0.1km/hr
knots
ft/min
1.6 to 58 knots
160 to 5900 ft/min
Resolution
0.1 knots
10 ft/min
3389
3390
farnell.com
Anemometers - continued
Vane Thermo-Anemometer
A remote vane thermo-anemometer measures air velocity and temperature. Excellent for ventilation
surveys, air conditioning, heating
and environmental monitoring.
Vane Anemoneter - continued
72-6638 - continued
228156
Mftrs.
Price Each
List No.
Order Code
72-6638
356-2669
1+
5+
Pocket Anemometers
410-1 & 410-2
Power, Test and Measurement
Available in two models:
410-1 wind or air flow and temperature
410-2 wind or air flow, temperature and
humidity
Ì Integrated 40mm vane
Ì Timed mean value calculation
Ì Hold function and min./max. values
Ì Windchill calculation for outdoor areas
Ì Backlit display
Ì Auto-off
Both models supplied with Calibration protocol, wrist strap, belt holder, protective cap &
batteries
Flow Velocity
Temperature
Humidity (410-2 only)
0.4 to 20 m/s
-10 to 50°C
0 to 100 %rh
0.1 m/s
0.1°C
0.1 %rh
± 0.2 m/s + 2% of m.v.
± 0.5 °C
± 2.5 %rh (5 to 95 %rh)
m/s, km/h, fpm, mph, knots, °C/°F
%rh, wet bulb, dewpoint
perceived temp. °C/°F (windchill), Beaufort
Operating Temperature -10 to 50°C
Battery Type
Alkaline (2 x AAA)
Battery Life
100hrs (410-1), 60hrs (410-2) (average, without display illumination)
Dimensions
133 x 46 x 25mm (Incl. Protective Cap)
Measuring Range
Resolution
Accuracy
Units
488462.503098
51
Price Each
Mftrs. List No.
Order Code
410-1
410-2
1+
147-1402
147-1403
Test Equipment – Environmental, HVAC & Pressure
Flexible Thermo-Anemometer
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Measures air velocity in m/s, ft/min, km/h, knots & mph
°C/°F temperature
Impact-resistant ABS case
Flexible gooseneck probe adjusts easily to the shape required
then remains rigid to allow easy one-hand operation
Large 25mm backlit 4 digit LCD display with function indicators
Simultaneous display of airflow and temperature
Data hold & max/min hold functions
Auto off and low battery indicator
Supplied with carry case & battery
Anemometer
Min
Max
Resolution
Accuracy
Thermometer
Range
Resolution
Accuracy
Physical
Battery
Dimensions (WxHxD)
Weight
m/s
0.6
30
0.01
±3%
ft/min
119
5900
1
±3%
mph
1.4
67
0.1
±3%
km/h
2.2
108
0.1
±3%
knots
1.2
58
0.1
±3%
Ì Measures air velocity in m/s, ft/min, km/h, knots
Ì °C/°F (switchable) temperature via K-type sensor in
the centre of the vane
Ì Impact-resistant ABS case with remote vane
Ì Remote 48mm Ø vane on permanently connected
1.7m coiled cable
Ì 43mm LCD display with large digits and function indicators
Ì Data hold & max/min functions (no min for air velocity)
Ì Auto off and low battery indicator
Ì Standard 1⁄4" camera bush for tripod mounting
Ì Can be used free standing with the desk-stand or on
W=76 H=162 D=39mm.
a tripod
Weight 413g
Ì Suitable for single-handed operation using the vane mounting clip attached to the instrument
Ì Supplied with rubber boot, carry case, shoulder strap & 9V battery
Measurement
Air Velocity (m/s)
Air Velocity (ft/min)
Air Velocity (km/h)
Air Velocity (knots)
Temperature (°C)
Temperature (°F)
Range
0.3 - 45m/s
60 - 8800ft/min
1 - 140km/h
0.6 - 88knots
0 - 60°C
32 - 140°F
Resolution
0.1m/s
10ft/min
0.1km/h
0.1knots
Accuracy
±3%
±3%
±3%
±3%
±2°C
±3°F
450393.460951
Mfrs.
Price Each
List No.
Order Code
AVM-618B
1+
129-7749
Price Each
Standard Calibration Charge
UKAS Calibration Charge
S
N
Anemometer with Remote Probe
TMA10A
The TMA10A is ideal for HVAC/R technicians measuring Heat / Ventilation / Air Conditioning / Refrigeration wind flow and temperature in residential, commercial and industrial air conditioning systems. It offers
numerous functions - use it to check air velocity FPM (Feet Per Minute), air volume
(flow) CFM (Cubic Feet per Minute) plus remote vane allows greater measurement flexibility. Switch between °C and °F, Input area
of flow measurement to gain accurate air velocity results. Measure an air flow source for
a continuous moving average for up to two
hours. Determine minimum, maximum and
average readings from a single point air source.
Ì Measuring Air velocity
Ì Data hold to freeze measurement display
Ì Direct measuring of air flow
of both readings
Ì Continuous Moving Average for up to 2 Ì RS232 interface output with optional
hours
software and cable
Ì MIN/MAX/AVG reading on a single point Ì Obtain air flow (CFM) average for multiÌ Air Velocity average for multiple points
point
Ì Non Sleep Mode (bypass auto power off)
489620.502903
-10°C to +60°C
0.1°C
±1.5°C
Price Each
Mftrs. List No.
Order Code
TMA10A
1x 9V PP3
45 x 163 x 34mm
247g
Price Each
480540.466706
Price Each
1+
142-6152
FREE GLOBAL LEGISLATION SUPPORT
RoHS, REACH, WEEE, ErP, Batteries
Directive - latest updates, free white
papers and live online Q&A at
element14.com/legislation
1+
146-6472
Standard Calibration Charge
A vane thermo-anemometer with a 0.4m flexible gooseneck sensor which measures air velocity and temperature. This easy-to-use velocity thermo-anemometer allows easy access
to areas that are hard to reach. Excellent for ventilation surveys, air conditioning, heating
and environmental monitoring.
Order Code
3390
element14.com
S
Large-Area Vane Anemometer
417
Features a fixed flow-temperature vane to measure flow, volume flow
and temperature. Volume flow is shown directly on the clear backlit display. Just input the duct measurements, and accurate volume flow calculations are automatically displayed. You can also switch
between flow and temperature. Flow direction, either from pressure or
vacuum source, is visible in the display.
Ì Direction recognition of flow
Ì Temperature, flow and volume flow measurement
Ì Multi-point or timed mean calculation
Ì Max/min values
Ì Hold button to freeze readings
Ì Display light
Ì Auto-Off function
Ì 2 years warranty
farnell.com
Probe Type
Measurement range
Resolution
NTC
0°C to +50°C
0.1°C
Vane
0.3 to 20 m/s
0.01 m/s
Volume Flow
0 to 99999 m3/h
0.1 m3/h (0 to 99.9 m3/h)
1 m3/h (100 to 99999 m3/h)
element14.com
3391
Thermo-Anemometer
975 AirMeter™
Accuracy
± 0.5°C± 1 digit ± (0.1m/s+1.5% of mv)± 1 digit
Operating Temperature 0 to 50°C
Battery
9V
Battery life
50 hours
418057
Price Each
Description
Order Code
Vane Anemometer
Instrument and Probe Case
1+
108-2990
108-3011
Compact Vane Anemometer
416
Direct display of volume flow
Multi-point or timed mean calculation
Max/min values
Hold button to freeze readings
Display light
Auto-Off function
Optional TopSafe protects instrument from dirt and
impact
Ì 2 years warranty
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Probe Type
Measurement range
Resolution
Accuracy
Operating Temperature
Battery
Battery life
Vane
0.6 to 40 m/s
0.1 m/s
± (0.2m/s + 1.5% of mv) ± 1 digit
-20 to 50°C
9V Alkali Manganese
80 hours
418051
Price Each
Description
Order Code
1+
NTC
-20°C to +70°C
0.1°C
± 0.5°C± 1 digit
-20 to 50°C
9V
20 hours
Order Code
Thermo-Anemometer
AirMeter with Velocity Probe
Air Velocity Probe
975
975V
975VP
127-2835
127-2836
127-2837
Airflow Meter
418065
Order Code
Thermal Anemometer
Instrument and Probe Case
TopSafe - Protective Carry Case
1+
108-2992
108-3011
108-2989
INTELLIGENT ONLINE BUYING
SYSTEM PROVIDING
Complete cost control, reduced
administration time, visibility of your
spend, flexibility and personalised to
your company’s needs.
farnell.com/ibuy
1+
Fluke 922
Thermal Anemometer
0 to 20 m/s
0.01 m/s
± (0.03m/s+5% of mv)± 1 digit
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
A simple solution for diagnosing
ventilation issues. The Fluke 922
makes airflow measurements easy
by combining three tools: differential
pressure, airflow, and velocity into a
single, rugged meter.
Ì Measure pressure drops across
key HVAC equipment to drive
peak performance and extend
equipment life
Ì Match ventilation to occupant
loads
Ì Monitor indoor vs. outdoor pressure relationships and manage
the building envelope
Promote indoor comfort and quality
Perform duct traversals for accurate airflow readings
Powerful meter provides differential and static pressure, air velocity and flow readings
Convenient coloured hoses help proper interpretation of pressure readings
Easy to use without sacrificing performance
Bright, backlit display for clear viewing in all environments
User-defined duct shape and size for maximum airflow accuracy
Resolution down to 0.001 in H2O
99 point data storage capacity
Min/Max/Average/Hold functions for easy data analysis
Auto power off saves battery life
Feature
Air Pressure
Air Velocity
Air Flow (Volume)
Temperature
Dimensions
51
Price Each
List No.
Price Each
Description
Accuracy
±0.5°C
±2%
±4%
2.75% + 75 ppm
±5% or ±3 ppm whichever is greater
±1°C
±1.2°C
1x PP3 battery (supplied)
Description
Temperature, flow and volume flow measurement
Multi-point or timed mean calculation
Ì Display light
Max/min values
Ì Auto-Off function
Hold button to freeze readings
Ì 2 years warranty
Probe Type
Measurement range
Resolution
Accuracy
Operating Temperature
Battery
Battery life
Range
-20°C to 50°C
10% to 90%
0.25 to 15 m/s
0 to 5000 ppm
0 to 500 ppm
-44°C to 50°C
-16°C to 50°C
0 to 3965 m3/min
Mfrs.
An easy to use, compact anemometer with an attached thermal probe
on a telescopic handle (max. 820mm). Duct measurements are easily
entered and the volume flow measurement is calculated and shown
on the clear display. In addition, it is possible to switch easily between flow and temperature readings.
Ì
Ì
Ì
Ì
Feature
Temperature
Relative Humidity
Air Velocity
CO2
CO
Dew Point Temperature
Wet Bulb Temperature
Volume Flow Rate
447122.460943
108-2988
108-3011
108-2989
Compact Thermal Anemometer
425
Fluke 975 AirMeter includes:
Meter, 3x AA alkaline batteries, user manual, calibration cap, hard carrying case, FlukeView
forms software, AC power adapter and international power plugs.
Fluke 975V AirMeter additionally includes: 1x 975VP Air Velocity Probe.
Test Equipment – Environmental, HVAC & Pressure
Vane Anemometer
Instrument and Probe Case
TopSafe - Protective Carry Case
W=114 x H=287 x D=51mm.
Weight 544g
Combining five tools in one, the Fluke 975 provides instant
answers on temperature, humidity, air velocity, CO2, and
CO and enables users to quickly generate detailed reports
for further analysis.
Ì Rugged and easy to use
Ì Instantly calculates dewpoint and wet bulb temperatures, % of outside air, and air flow
Ì Single point (99 records) or continuous data logging
(25,000 records) functionality
Ì Meter has a keypad lockout feature and it accepts a
Kensington lock
Ì Powerful FlukeView Forms software makes reporting
and analysis simple and fast.
Power, Test and Measurement
An easy to use anemometer with an attached 16mm vane
probe on a telescopic handle (maximum length 890 mm).
Just enter the duct measurements directly into the testo
416 and the volume flow measurement is shown on the
clear display. You can switch between flow and temperature readings easily. Timed and multi-point mean flow
calculations allow easy flow analysis, volume accumulation estimates, and temperature variation monitoring.
Range
Accuracy
4000 Pa
±(1%+1Pa)
±(1%+0.01 in H2O)
16 in H2O
±(1%+0.1mm H2O)
400mm H2O
40mbar
±(1%+0.01mbar)
0.6 PSI
±(1%+0.0001PSI)
250 to 16000fpm
±2.5% of rdg
1 to 80 m/s
±2.5% of rdg
0 to 99,999 cfm
0 to 99,999 m3/hr
0 to 99,999 l/s
0°C to 50°C
±(2% + 2°C)
W=78 x H=175 x D=42mm. Weight 640g
3391
3392
farnell.com
Anemometers - continued
element14.com
Combustible Gas Leak Detector
Ì Long 400mm gooseneck for hard-to-reach places
Ì Simple adustable ’tick-rate’ increases as
the sensor tip aproaches a leak
Ì Detects Methane, natural gas, butane
and propane
Airflow Meter - continued
Fluke 922 - continued
Fluke 922 includes:
Meter, 2x Rubber Hoses, 4x AA Batteries, Users Manual Soft Carrying Case
Fluke 922 Kit additionally includes:
12" pitot tubes, TPak Magnetic Strip, TPak Strap, TPak Latch Tab, Hard Carrying Case.
469774.469766
Mftrs.
Power, Test and Measurement
51
Description
List No.
Order Code
Thermo-Anemometer
T-A with velocity probe
Air Velocity Probe
922
922/KIT
PT12
132-7237
132-7238
132-7241
1+
Solid State, Low Power Semiconductor Sensor
Sensor sensitivity:
50 ppm (methane)
Response time:
< 2 second
Gasses Sensed (Partial List)
Methane, Natural Gas, Ammonia, Hydrogen Sulphide, Propane, Acetone, Petrol, Naphtha, Smoke, Steam,
Lacquer Thinners, Jet Fuel, Butane, Industrial Solvents, Alcohol
Particle Counter
Alarm
Visible & audible alarm at 10% LEL for Methane. Can be calibrated for other concentrations or gasses.
Fluke 985
The Fluke 985 Particle Counter is the a choice for
HVAC and IAQ professionals. From filter testing
to IAQ investigations, the counter is the portable
solution for determining airborne particle concentrations. Use the counter to immediately respond to occupant complaints, or as part of a comprehensive preventive maintenance program. With a large screen, intuitive icons for navigation and on-screen
data presentation, the counter allows users to run more tests quickly,
with less time spent cycling through screens to obtain the data.
Ì Measure filter efficiency
Ì Monitor industrial cleanrooms
Ì Pre-screen indoor air quality and confidently work with IAQ specialists
Ì Locate particle sources for remediation
Ì Report the effectiveness of repairs to customers
Ì Drive additional business by demonstrating the need for maintenance and repair
Ì Six channels and particle size range of 0.3 - 10.0 µm:
Ì 3.5" QVGC Color display
Ì USB/Ethernet charge cradle
Kit Contents: Counter unit, Charging/communication cradle, Ethernet cable, USB cable,
power supply, Zero count inlet-filter, filter adapter, sample inlet protective cap, Hard case,
Basic manual and User manual CD.
Test Equipment – Environmental, HVAC & Pressure
Channels
Flow rate
Light source
Count modes
Data storage
Alarms
Delay time
Sample inlet
Communication mode
Dimensions (LxWxD)
Weight
Operating temperature
0.3μm, 0.5μm, 1μm, 2μm, 5μm, 10μm
0.1 cfm (2.83 L/min)
775 nm to 795 nm, 90mW class 3B laser
Raw counts, #/m3, #/ft3, #/liter in Cumulative or Differential mode
10,000 records (rotating buffer)
Counts, low battery, sensor fail
0 to 24 hours
Isokinetic probe
USB or Etheret
272x99x53
680g
10°C to 40°C
Physical
Battery Type
Battery life
Flexible gooseneck
Price Each
Mftrs. List No.
Order Code
FLUKE-985
1+
211-4832
446885.430827
Order Code
Carbon Monoxide is difficult to detect, as it is a colourless, odorless, tastless and toxic gas
produced as a by-product of combustion. Because you can’t see, taste or smell it, carbon
monoxide can kill you before you know it is there. Fire professionals are increasingly called
upon to respond to calls regarding possible carbon monoxide poisonings. Any fuel burning
appliance, vehicle, tool or other device has the potential to produce dangerous levels of
carbon monoxide gas. Examples of carbon monoxide producing devices commonly in use
in or around you home include:
Fuel fired furnaces (non electric)
Gas water heaters
Fireplaces and wood stoves
Gas stoves and Gas dryers
222548
Carbon Monoxide Levels
0 ppm
Desirable level
100 ppm
Slight headache 2 to 3 hours
400 ppm
Frontal headache 1 to 2 hours, widespread in 2.5 to 3.5 hours
800 ppm
Dizzines, Nausea, convulsions within 45 minutes
3200 ppm Headache, dizziness, nausea within 5 to 10 minutes, death within 1 hour
6400 ppm Headache, dizziness, nausea within 1 to 2 minutes, death within 25 to 30 minutes
1+
127-0536
Combustible Gas Leak Detector
Ì Simple adjustable ’tick rate’ increases as the sensor tip approaches a leak
Ì Detects Methane, natural gas, butane and propane
Ì Long 400mm gooseneck for hard to reach places
Ì ’Tip-light’ illuminates the area of the leak
Ì Sensor provides accurate detection
Ì Rubber boot protects instrument
Solid State, low power
semiconductor sensor
Sensor sensitivity: 50 ppm (Methane)
Typical sensor life: 3 years
Reaction time: < 1 second
Gases sensed
(Partial list)
Methane, Natural Gas, Ammonia, Hydrogen, Propane,
Acetone, Petrol, Refrigerants, Ethylene, Halon,
Laquer, Thinners, Industrial Solvents, Alcohol, Jet fuel
Red LED
Flashes to indicate gas presence.
ON continuously indicates low battery
Audible indicator
From internal speaker, increased ’tick-rate’ with gas
presence.
Optional ear-piece for noisy environments
Green LED indicator
Indicates power on
Battery type
1 x 9 volt battery (PP9)
Battery life
>5h> continuous
Flexible gooseneck
400mm/18" reach
Bright LED incorporated in sensor head
Dimensions
100mm x 205mm x 36mm 4" x 8"1.5"
Weight
460g/15oz
Hazardous Gas & Liquid Testers
Carbon Monoxide
3 x C (supplied)
8 hours continuous use
400mm/16" reach
Price Each
658494
1600 ppm Headache, dizziness, nausea within 20 minutes, death within 1-2 hours
3392
W=72 H=221 D=46mm. Weight 520g
Price Each
220427
Mftrs.
Price Each
List No.
Order Code
CD100AA
1+
325-6145
Radiation Meters
Radiation Survey Meter
Fluke 481
Easy-to-use, handheld device helps to
protect operations and reassure employees. The Fluke-481 Radiation
Survey Meter is a portable and practical means for identifying irradiated goods, and for helping
to remediate contamination and safety issues while minimally impacting operations. Use of the device reassures
employees that radiation risks are known, monitored and
measured for their protection. If radiation is found, a clear
and quantifiable result allows managers to comply with federal guidelines, without overreacting with unnecessary
steps that might halt operations, impact productivity or lead to lost revenue.
Ì High sensitivity measurement of rate and dose simultaneously, with the capability to record peak rate
Ì Available with dose equivalent energy response (SI units)
Ì Easy touch keys
Ì Screen - Bright, highly visible colors
Ì Auto-ranging and auto-zeroing
Ì RS-232 communications interface with optional Windows-based Excel add-in for data
logging
farnell.com
Ì Ergonomic, anti-fatigue handle with replaceable grip, wrist strap and tripod mount
Ì Programmable flashing LCD display and audible alarm
Ì Easily-accessible battery door (operated by 2 9-volt alkaline batteries) on the outside of
the bottom case
Applications: Ideal for detecting irradiated goods, equipment, surfaces or environments in
industrial settings, for ensuring worker safety and complying with federal regulations.
Ì Food processing or packaging screening Ì Ports
Ì Transportation goods screening
Ì First Responders (Police/Fire)
Radiation detected
635082
Gas Analyser
KANE 425
Designed to meet EN50379, BS7927, BS7967 and IGE/11/UP/1B
the latest British and European standards for flue gas analysers. A
simple rotary switch enables the engineer to quickly measure combustion performance, differential pressure, differential temperature
and to perform timed let-by/tightness tests and room CO build-up
tests. On screen prompts guide the user where necessary. Thanks
to the high accuracy and stability of its pressure readings, difficult
tasks such as measuring flue draught or setting the differential
pressure of air/fuel ratio valves can be performed with confidence.
Ì Four line backlit display controlled by rotary switch
Ì Protective rubber sleeve with magnet for "hands free" use
Ì Multi-fuel: Natural Gas, Propane, Butane, LPG, Light Oils (28/35
sec)
Ì O2, CO, CO2, CO/CO2 ratio, temperature and efficiency readL=200, W=90,
ings
D=45mm
Ì High accuracy differential manometer
Ì Differential thermometer
Ì "Send" button for instant printout and logging
Ì Separate reports for: Combustion, Pressure, Let-by and Tightness, Temperature, CO
build up
Ì Battery life typically 12+ hours
Ì Designed to meet BS7927, BS7967 and EN50379
Ì Torch light
Price Each
Description
Order Code
Fluke 481 Ion Chamber Survey Meter
Fluke 481-DESI Ion Chamber Survey Meter, dose equivalent SI
1+
189-9066
189-9067
Accessories
Carry Case
189-9068
Heating & Refrigeration
Combustion Meter
KANE 250
Temperature Measurement
Flue Temperature
Inlet Temperature (Internal Sensor)
Inlet Temperature (External Sensor)
Gas Measurement
Oxygen
Carbon Monoxide
Carbon Dioxide
Efficiency
Excess Air
CO/CO2 ratio
Pressure (Differential)
Nominal Range ±80mBar
Maximum over-range without
damage to sensor is ±400mBar
Range
Resolution Accuracy
0 - 600°C
0 - 50°C
0 - 600°C
0.1°C
0.1°C
0.1°C
0 - 21%
0.1%
0 - 2000ppm (nom.) 1ppm
4000ppm max for 15 mins
0 - 30%
0.1%
0 - 99.9%
0.1%
0 - 250%
0.1%
0 - 0.9999
0.0001
±0.2 mBar
±1 mBar
±80 mBar
List No.
Code
Combustion Analyser
Combustion Analyser Kit
KANE250
KANE250 KIT
51
491377
2+
Price Each
Description
List No.
Order Code
Gas Analyser
Gas Analyser Kit
Gas Leak Detection Probe
NiMH Rechargeable Batteries
Soft Carry Case
425
425 KIT
GLD450
B15
17820
134-7870
134-7873
134-7874
134-7877
134-7878
1+
Refrigerant Leak Detector
RLD10
The RLD10 makes pinpointing leaks as easy as one, two. Detect
leaking refrigerant using the high sensitivity mode then switch to
the low sensitivity mode to pinpoint its source. If background noise
makes the audible tic hard to hear, you can count on the colour
scaled LED indicators.
Price Each
1+
0.001 mBar ±0.005 mBar
0.001 mBar ±0.03 mBar
0.01 mBar ±3% of reading
Each KANE425 is supplied with:
Flue probe, protective rubber sleeve with integral magnet, 2 pressure connectors, 4 x AA
alkaline batteries and instruction manual.
The KANE425KIT additionally includes:
Soft protective carry case, infra-red printer, plug-in gas leak detection probe, temperature
probe, NiMH rechargeable batteries and 220V mains charger.
339526.409900
Description
±0.3% reading
±1% reading
±0.2%
±5% reading
Mftrs.
Range
Resolution Accuracy
Temperature Measurement
Flue Temperature
0 - 600°C
1°C
±2°C±0.3% of reading
Inlet Temperature (Internal Sensor) 0 - 100°C
1°C
±1°C±0.3% of reading
Temp (Nett)
0 - 600°C
1°C
±2°C±0.3% of reading
Gas Measurement
Oxygen
0 - 21%
0.1%
±0.2%
Carbon Monoxide
0 - 1000ppm
1ppm
±10ppm<100ppm ±5% of rdg
4000ppm max for 15 mins
Carbon Dioxide
0 - 30%
0.1%
±0.3% reading
Efficiency
0 - 99.9%
0.1%
±1% reading
Excess Air
0 - 250%
0.1%
±0.2%
0 - 0.9999
0.0001
±5% reading
CO/CO2 ratio
General
Pre Programmed Fuels
Natural gas, light oil (28/35 sec), propane, butane, LPG
Battery life
4x AA type, approx 12 hours
Weight
1kg
Order
±0.2%
±10ppm<100ppm ±5% of rdg
Storage Capacity
99 Combustion Tests, 20 Pressure Tests, 20 Let-by / Tightness Tests,
20 Temperature Tests, 20 Room CO Tests
General
Pre Programmed Fuels
Natural gas, Propane, Butane, LPG, Light Oils (28/35 sec)
Ambient Operating Range
0°C to +40°C. 10% to 90% RH non-condensing.
Battery life
4x AA type, >12 hours (alkaline)
Dimensions
Handset: 200x45x90mm. Probe: L=300mm Ø6mm. Hose: 3m
Weight
0.8kg (handset with boot)
L=200, W=90, D=45mm
Mftrs.
±2°C±0.3% of reading
±1°C±0.3% of reading
±2°C±0.3% of reading
Ì
Ì
Ì
Ì
Ì
Ì
Ì
5+
505-7670
505-7681
Sensor
Sensitivity
Indicators
Auto zeros when turned on
LED panel indicates refrigerant leak concentration
Two position sensitivity selector
Audible tick rate
Long gooseneck probe
One-hand operation
Automatically detects all existing refrigerants and blends
Advanced ionisation detection
0.5 oz per year R134A
Audible: Variable tick
Visual: Scaled LED array
Warm-up
<10 seconds
Response time <1 second
Duty cycle
Battery life
Probe length
Ambient operating conditions
Power supply
Test Equipment – Environmental, HVAC & Pressure
The KANE 250 is the lowest priced combustion analyser that does not compromise on performance or features. Its unique rotary switch also makes it the simplest and quickest to use.
The KANE 250 is also available as a kit, consisting of
infra red printer, charger/mains adapter and carry case.
Ì O2, CO, CO2, CO/CO2 ratio and efficiency readings
Ì Multi fuel
Ì Professional quality sensors (CO readings to
1ppm)
Ì Detachable flue probe
Ì Real time clock
Ì Infra-red output to optional printer
Ì Rubber sleeve with integral magnet
Ì Designed to meet BS7927
3393
Power, Test and Measurement
Beta > 100 keV
Gamma > 7 keV
Operating ranges
0 mR/h to 5 mR/h (8 sec)
0 mR/h to 50 mR/h (2.5 sec)
0 mR/h to 500 mR/h (2 sec)
0 R/h to 5 R/h (2 sec)
0 R/h to 50 R/h (2 sec)
Accuracy
Within 10 % of readings between 10 % and 100 % of full scale indication on any
range, exclusive of energy response
Detector
Chamber (cc volume air ionization) 349 cc
Chamber wall (phenolic) 246 mg/cm2
Chamber window (mylar) 6.6 mg/cm2
Beta slide 440 mg/cm2
Automatic features
Auto-zeroing, auto-ranging, and auto-backlight
Power requirements
Two 9 V alkaline, 200 hours operation
Warm-up time
One minute
Battery life
Four+ hours continuous use per battery pack (assumes 50 % brightness of
LCD)
Dimensions (W x D x H) 100 x 200 x 150 mm
Weight
1.11 kg
element14.com
Continuous
Approximately eight hours
18-1/2"
0-40°C, 0 to 80% RH
One 9V battery
339530
The first online technical portal for design engineers
Log on, research, refine and design
Mftrs.
Price Each
List No.
Order Code
RLD10
505-7772
1+
3393
3394
farnell.com
Heating & Refrigeration - continued
element14.com
Pocket Hygrometer
610
Ultrasonic Leak Detector Kit
Ì Long-term drift-free Testo humidity sensor
Ì 2.5 %rh accuracy with calibration protocol
Ì Including dewpoint calculation and wet
bulb
Ì Hold function and max./min. values
Ì Backlit display
Ì Auto-off
Set of ULD-300 with UT-300 Transmitter
Ì Includes transmitter
Ì Transmitter [inch]pressurizes" area with ultrasonic
sound enabling the ULD 300 to
pinpoint leaks (used in areas where gas is not sufficiently pressurized)
Ì Applications include air tightness of cars or houses
Supplied with Calibration protocol, wrist strap,
belt holder, protective cap & batteries
525681
Mftrs.
Price Each
List No.
Order Code
TMULD-300
167-1208
1+
Power, Test and Measurement
Hygrometers
Temperature
Measuring Range
Resolution
Accuracy
Units
Humidty
Measuring Range
Resolution
Thermo-Hygrometer
Ì
Ì
Ì
Ì
Ì
Compact digital Hygro-Thermometer
Fast response time
High performance
Max hold and data hold function
Dual display and backlight
Humidity
Temperature
0 to 100 %rh
0.1 %rh
Accuracy
Units
± 2.5 %rh (5 to 95 %rh)
%rh, wet bulb, dewpoint
General Specifications
Battery Type
Battery Life
Alkaline (2 x AAA)
200 hrs (average,
without display illumination)
Dimensions (Incl. Protective Cap)
119 x 46 x 25mm
488389.503095
Range
0 to 100% RH
-20 to 60°C
Accuracy
±3.5% RH
±2°C
Price Each
Mftrs. List No.
Order Code
610
W=45 H=255 D=34mm. Weight 200g
1+
147-1397
Handheld Thermo-Hygrometer
Ì Dual display of humidity and temperature
Ì Measures temperature in °C or °F
Ì Impact-resistant ABS case with rubber boot and flipout desk stand
Ì Probe with 1.8m coiled cable
Ì 45mm high intensity backlit LCD with dual display and
status indicators
Ì Sampling rate 2.5 times per second
Ì Data hold and max/min hold functions
Ì Auto power off
Ì Mounting clip on the instrument allows single-handed
use
Ì Supplied with carry bag & strap, rubber boot and battery
624208
Mftrs.
51
-10°C to 50°C
0.1°C
± 0.5°C
°C/°F
Description
List No.
Thermo-Hygrometer
ST-321
Price Each
Order Code
1+
100-3032
Price Each
Test Equipment – Environmental, HVAC & Pressure
Standard Calibration Charge
UKAS Calibration Charge
S
N
Relative Humidity and Temperature Meter
TH-3
The TH-3 uses a precision capacitance sensor to deliver accurate performance with long term stability. This
high accuracy instrument measures the full range of
relative humidity from 0% to 100% and features an exceptionally wide ambient temperature measurement
range from -20°C (-4°F) to 60°C (140°F). The sensor
is mounted on a long shaft extending from the top surface of the unit, making probing of ductwork and hard
to reach areas more easy. The large LCD displays two
measurements simultaneously with a full range of display options including Hold, Min, Max, and Relative.
The TH-3 is a complete package and comes with soft
carry case, sensor cover, battery and manual.
Ì Auto power off
Ì Soft carrying case
Ì User manual includes Wet Bulb chart
Ì Laboratory grade
Ì Dual display of Relative Humidity and Temperature
simultaneously
Ì Relative function monitors humidity and temperature changes
Ì Extended probe stem to easily access air ducts
Ì Min/Max readings Data hold to freeze measurement value on display
Ì Capacitive sensor with protective cover
Thermometer
Range
Resolution
Accuracy
Humidity Meter
Range
Resolution
Accuracy
Dew Point
Range
Resolution
Accuracy
Wet Bulb
Range
Resolution
Accuracy
Physical
Battery
Dimensions (WxH)
Weight
-30°C to +100°C
0.1°C
±0.5°C
0 to 100% RH
0.1% RH
±2% RH
-30°C to +100°C
Order Code
PP3 (included)
72 x 155 x 35mm
210g
480495.466703
Order Code
1+
142-6148
Relative Humidity Meter
Ì Portable relative humidity and temperature
meter
Ì Large LCD
Ì Detachable 1m probe
Ì Fast response, high accuracy
Ì Measurement in °C or °F, selectable
Ì Supplied complete with probe and battery
489623.502902
TH-3
0°C to 80°C
0.1°C
±1°C
Price Each
Price Each
Mftrs. List No.
0.1°C
±1°C
1+
146-6476
Range
Accuracy
10% to 95% RH
0°C to +60°C°C (32 to 140°F)
0.1% RH
0.1°C, 1°F
2% RH,0.4°C, 1°F
Weight
Battery
Battery life
315g
1 x 9V PP3 (supplied)
100 hrs
Resolution
222472
Price Each
Order Code
710-6208
3394
1+
farnell.com
971
Ì
Ì
Ì
Ì
Ì
Ì
Invaluable for facility maintenance and utility technicians, HVACservice contractors, and specialists who assess indoor air quality
(IAQ). Lightweight and easy to hold, with a rugged holster and
twist-open protective sensor cover.
Simultaneously measures humidity and temperature
Measures dew point and wet bulb
99 record storage capacity
Min/Max/Avg Data Hold
Ergonomic design with built-in belt clip and protective holster
Backlit, dual readings display
Twist-open protective cap
Low battery indicator
Temperature Measurements
Range
-20°C to +60°C
Resolution
0.1°C
Accuracy
±0.5°C (0°C-45°C) / ±1.0°C (rest of range)
Response Time 500 ms
Sensor Type
NTC
Fully interchangeable without loss of precision
Measurements ranges 0...100%rh, -100...200°C
Based on AirChip 3000 digital technology
User configurable
Integral 2000 point data storage
Automatic sensor test and drift compensation
HygroClip2 HC2-S
Ì Humidity and temperature measurement in air
Ì Easily cable mounted
Ì Dimensions: 80 x 15mm diameter
HygroClip2 HC2-S
Humidity measuring range
Temperature limits
Accuracy at 23°C ±5°C
Probe material
Dust filter
0...100%rh
-40...100°C
±0.8%rh, ± 0.1°C
Black polycarbonate
Polyethylene
HC2-S
Price Each
List No.
Description
HC2-S
E2-02A
Ambient air probe
2m probe extension cable
Order Code
1+
169-8600
169-8604
Light Meters
624212
Mftrs.
Lux Meter
Price Each
Order Code
971
1+
Ì 31⁄2 digit display
Ì Low battery indicator
Ì Hand held digital light meter with integral sensor
Ì 3 switchable ranges
Ì Supplied with carry case
114-7977
Price Each
Standard Calibration Charge
UKAS Calibration Charge
S
N
Temperature and Humidity Instrument
625
An ideal entry level instrument for measurements of temperature,
humidity and dewpoint. Use it to monitor hard-to reach points in AC and
heating system ducts, environmental changes in remote rooms or storage
areas, anywhere you need to be two places at the same time or only have
one hand free to work. The clear back-lit display can be switched between
relative humidity, wet bulb, and dewpoint at the touch of a button. The temperature / humidity probe can be used 2 ways: either attached to the instrument or connected via a probe handle and cable (108-3014).
Range
Accuracy (±1 digit)
Resolution
-10°C to +60°C ±0.5°C
0.1°C
0 to 100% RH
±2.5% RH (5 - 95% RH) 0.1% RH
Requires 9V PP3 battery for operation
224552
Mftrs.
Price Each
List No.
Order Code
LX101
725-109
540
Ì
Ì
Ì
Ì
Ì
W=64 H=182 D=40mm. Weight 195g
418875
625 Thermo Hygrometer
108-3012
Accessories
Plug-In Probe Handle
Instrument and Probe Case
Protective Case
108-3014
108-3011
108-2989
Sensor is adjusted to the spectral sensitivity of the eye
Hold reading function
Max./min. values
Backlit display
Auto-off
Measuring Range
Price Each
Order Code
1+
Accuracy
Units
Operating Temperature
Battery Type
Battery Life
Dimensions
(Incl. Protective Cap)
HygroPalm Hand-Held Humidity Instrument
1+
Lux Meter
Includes: humidity/temperature measuring instrument, incl. plug-in
humidity probe head, battery and calibration protocol.
Description
(resolution 1 lux)
(resolution 10 lux)
(resolution 100 lux)
0 to 99,999 Lux
1 Lux (0 to 19,999 Lux)
10 Lux (20,000 to 99,999 Lux)
± 3% (Compared to reference)
Lux, Footcandle
0 to 50°C
Alkaline (2 x AAA)
20 hrs (average,
without display illumination)
133 x 46 x 25mm
Supplied with Calibration protocol, wrist strap, belt holder, protective cap & batteries
HygroPalm 22
488530.503099
Ì
Ì
Ì
Ì
Ì
Ì
Price Each
High accuracy humidity/temperature measurement
Rapid response and highly repeatable
Dew point and other psychrometric calculations
2000 data point memory
Auto-diagnostics and automatic error correction
Interchangeable probe option
Mftrs. List No.
532688
72-6693
An easy to use, versatile, hand-held, microprocessor controlled, digital light meter.
W=72, D=32, L=180
Price Each
List No.
Description
HP22
HygroPalm 22
Order Code
169-8599
1+
147-1404
Digital Light Meter
HygroPalm 22
Measuring range
0...100%rh, -100°C...+200°C (probe dependant)
Operating range
0...100%rh, -10°C...+60°C
Accuracy
±0.8 %rh, ±0.1K at 23±5°C
Resolution
0.02%rh, 0.01°C
Long-term stability
<1%rh/°C per year
Calculation
All psychrometric values
Adjustment
Multi-point %rh, 2 point °C from keypad
PC interface
USB
Display
Graphic, backlit
Power supply
9V battery,
Weight
Approx 210g
**Note: The HP22 is not supplied with a measurement probe, these should be
ordered separately
Mftrs.
Order Code
540
1+
Range
2000 LUX
20,000 LUX
100,000 LUX
Resolution
1 LUX
10 LUX
100 LUX
Range
200 Ft-cd
2,000 Ft-cd
10,000 Ft-cd
Ì 3 ranges 2,000/20,000/50,000 LUX
Ì 3 ranges 200/2,000/10,000 Ft-cd
Ì Extra large, dual function display with contrast adjustment
Ì User selectable lighting type (tungsten, fluorescent, daylight and mercury)
Ì Records max./min./avg. readings
Ì Data hold and auto power off
Ì Includes owner manual
Ì CE marked
Resolution
0.1Ft-cd
1Ft-cd
10Ft-cd
51
Test Equipment – Environmental, HVAC & Pressure
Probe
NTC Temperature Probe
Capacitive Humidity Sensor
0 - 1999 lux
0 - 19999 lux
19999 - 50,000 lux
Power, Test and Measurement
532689
Mftrs.
Humidity Measurements
Range
5% to 95% R.H.
Accuracy
±2.5% R.H. (10%-90% R.H.) / ±5% (rest of range)
Response Time 60 s with 1 m/s air movement
Sensor
Type
Electronic
Capacitance Polymer Film Sensor
W=60 H=194 D=34mm.
Weight 188g
List No.
3395
HygroClip2 Interchangeable Digital Probes
Temperature Humidity Meter
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
element14.com
Power
9V Battery (not included)
Dimensions W = 55mm, L = 85mm, D= 12mm
(sensor probe)
3395
3396
farnell.com
Light Meters - continued
Light Meter Manual Ranging
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Digital Light Meter - continued
72-6693 - continued
228182
Mftrs.
Price Each
List No.
Order Code
72-6693
356-2670
element14.com
1+
Measure in Lux or Footcandles, front panel switchable
Measuring Range to 20,0000 Lux or Foot candles
Silicon photodiode sensor and filter
Data Hold to freeze reading on the digital display
MIN / MAX ability to show high and low readings
Includes protective sensor cap
Large, 3-1/2 digit display
Light Meter
Power, Test and Measurement
W=80 H=170 D=43mm. Weight=390g
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Easy-to-use light meter with wide measuring range up to 400,000 lux, large LCD display, 41-segment analogue bargraph, relative mode and user-selectable measuring
units. Ideal for environmental monitoring,
health and safety checks, and industrial applications.
Ì Measures both Lux and Foot Candles
(FC), user selectable
Ì Manual range selection of 5 ranges
(Lux), 4 (FC)
Ì Impact-resistant ABS case with protective rubber boot
Ì Silicon photo diode sensor and spectral
response filter
Fully cosine corrected
Sensor connected to the instrument by a fixed approx 1.5 metre coiled cable
Measuring rate of 1.5 times per second
Easy to read - large 43mm backlit LCD display with 41 segment bar graph and function
indicators
Peak hold, Data hold and Max/min hold
Relative reading
Over range indication
Reset function
Auto power off and low battery indication
Supplied with carry pouch, rubber boot, protective lens cap & 9V battery
Range
Resolution
Accuracy
40,400,4000,40000,400000 Lux 0.01,0.1,1,10,100 Lux ±(5%+10d) <10kLux, ±(10%+10d) >10kLux,
40, 400, 4000, 40,000 FC
0.01, 0.1, 1, 10 FC
±(5%+10d) <10kLux, ±(10%+10d) >10kLux,
51
450419.460952
Mftrs.
525724
Mftrs.
List No.
Test Equipment – Environmental, HVAC & Pressure
Order Code
LX-1308
129-7753
Price Each
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì Peak hold and Data hold freezes
measured values
Ì Max/min hold
Ì Relative reading
Ì Over range indication
Ì Auto zero
Ì Auto power off and low battery indication
Ì USB interface for output to PC
Ì Supplied with carry pouch, rubber
boot, USB interface cable, protective lens cap & battery
525725
Order Code
Light Meter
142-6153
Price Each
List No.
Order Code
LM-120
1+
167-1223
Price Each
Standard Calibration Charge
S
Light Meter
T545
In order to have good light quality the luminous intensity in
places of work, hospitals, offices or schools has to fulfil
specific minimum values. This can be measured and documented
Ì Timed mean calculations
Ì Multi-point mean calculations via 99 measurement
points
Ì Up to 99 locations can be selected
Ì Logger function (3000 measured valued)
Ì Hold/Max/Min/Mean
Ì 2 switchable ranges of resolution
Ì Supplied with probe, battery and instruction manual
H=50mm, W=68mm, L=220mm
Measurement range 0 to 100,000 Lux
Resolution
0 to 32,000 Lux 1 Lux
0 to 100,000 Lux 10 Lux
Weight
500g
222568
Mftrs.
Price Each
List No.
Order Code
T545
1+
311-8447
Liquid Testers
pH Tester
Ì
Ì
Ì
Ì
Ì
pH:
480545.466707
Description
Measure in Lux or Footcandles, front panel switchable
Measuring Range to 200,000 Lux or 20,000 Foot candles
Silicon photodiode sensor and filter
Data Hold to freeze reading on the digital display
MIN / MAX ability to show high and low readings
Autoranging plus Manual Range
Zero function to null display before a reading
Auto Power Off to save battery life
Includes protective sensor cap
Large, 3-1/2 digit display
Mftrs.
Easy-to-use light meter with USB interface,
wide measuring range up to 400,000 lux,
large LCD display, 40-segment analogue bargraph, relative mode and user-selectable
measuring units. Ideal for environmental monitoring, health and safety checks, and industrial applications.
Ì Measures both Lux and Foot Candles (FC), user selectable
Ì Range selection of 4 ranges (Lux), 4 (FC)
Ì Impact-resistant ABS case with protective rubber boot
Ì Silicon photo diode sensor and spectral response filter
Ì Fully cosine corrected
Ì Sensor connected to the instrument by a fixed
approx 1.5 metre coiled cable
Ì Measuring rate of 1.5 times per second
Ì Easy to read - large backlit LCD display with
40 segment bar graph and function indicators
S
Light Meter Auto Ranging
Hand-Held Light Meter
400 / 4000 / 40000 / 400000 Lux
40 / 400 / 4000 / 40000 FC
Resolution 0.1 / 1 / 10 / 100 Lux
0.01 / 0.1 / 1 / 10 FC
Accuracy ±(5% + 10 digits) below 10000 Lux
±(10% + 10 digits) above 10000 Lux
Power
1x 9V PP3
Dimensions 80 x 170 x 43mm
(WxHxD)
Weight
390g
1+
167-1222
Standard Calibration Charge
1+
Range
Order Code
LM-100
Price Each
List No.
Price Each
Price Each
Low cost
Ideal for testing involving test-tubes or limited access
Large clear LCD
pH meter 710-7535
Replacement pH electrode 710-7547
replacement electrode available
0pH to 14pHpH, 0.01 res
Accuracy: ± 0.2pH
Calibration: Manual Single Point
1+
Dimensions: 66 x 50 x 25mm
IMPROVED BACK ORDER DELIVERY
222471
Price Each
Receive email updates with the exact status, due
date and despatch information of all your back
order items farnell.com
3396
Description
pH tester
Replacement electrode
Order Code
710-7535
710-7547
1+
farnell.com
Waterproof pocket pH Meters
Ì
Ì
Ì
Ì
Ì
Dual level display shows pH and °C
Battery life indication
Replaceable pH electrode
Waterproof and floating case
Automatic calibration
element14.com
Mftrs.
Order
Price Each
Description
List No.
Code
1+
pH Meter for liquids
pH Meter for liquids starter kit
206 PH1
206 PH1 KIT
3397
836-9089
836-9097
pH/ion/temp Meter
HI-8424
Temperature
Range
HI 98127
HI 98128
0.0 to 14.0
0.00 to 14.00
Resolution
0.1
0.01
Accuracy (@20°C)
±0.1
±0.05
0.0 to 60.0°C
0.0 to 60.0°C
Range
Resolution
0.1
0.1
Accuracy
±0.5°C
±0.5°C
Calibration
Automatic 1 or 2 points with 2 sets of memorised buffers
(pH 4.01/7.01/10.1 or pH 4.01/6.86/9.18)
Temperature compensation
Automatic (user may disengage)
Environment
From 0 to 50°C; RH 100%
Battery type/life
Ì Hand-held pH/mV°C meter
Ì Automatic calibration and 3 buffer recognition
Ì Auto and manual temperature compensation
Range
4 x 1.5V with BEPS (battery error prevention system)/350 hours
Auto shut off
After 8 minutes
LCD
Resolution
Custom, dual-level
Casing
Waterproof, 100% buoyancy
Stability indicator
Accuracy
Calibration
Temperature Compensation
Battery type/life
Dimensions
Weight
Illuminates when pH reading is stable
Dimensions
163x40x26
Weight
85g
Ì Supplied complete with epoxy-bodied
pH electrode and temperature and temperature probe
Ì Self-diagnostic error codes for problem
solving
0pH to 14pHpH
0 to ± 399.9mV (ISE),0 to ± 1999mV (ORP)
0.0°C to 100.0°C
0.01pH
0.1mV (ISE), 1mV (ORP)
0.1°C
± 0.01pH,± 1mV,± 0.4°C
auto with 3 memorised buffers 4.01, 7.01, 10.01
auto or manual from 0°C to 100°C
9V PP3 (supplied),100 hours
185 X 82 X 45mm
520g
224542
234810
Mftrs.
Price Each
List No.
HI-98127
HI-98128
HI-73127
Order Code
pH meter
pH meter
pH electrode
1+
369-5876
369-5888
369-5890
Mftrs.
Price Each
List No.
Order Code
HI-8424
710-8102
Spare pH electrode
HI-1230B
327-7033
Pocket Conductivity Tester
206
Primo5
1+
51
Microprocessor stick meter for conductivity and TDS
with push-button, single point auto-calibration and temperature compensation. Battery life is 250 hours with
new battery indicator on the LCD display.
Ì
Ì
Ì
Ì
Automatic calibration
Automatic temperature compensation
TDS or conductivity models
Suitable for laboratory, industry, production or field
use
W=50mm, D=25mm, L=180mm
H=197, W=33, D=20mm Weight = 69g
Compact pH measuring instruments for measuring liquids. Automatic recognition of a stable reading makes it easier to measure. The TopSafe case makes the instruments ideal for
outdoor applications or use in tough industrial conditions.
Ì Versatile, accurate pH measuring instrument
Ì Not affected by dust or dirt thanks to the TopSafe protection case
Ì Maintenance-free gel electrode
Ì Built-in temperature probe
Ì 2 line display
Ì Automatic full scale value recognition
Ì pH1 offers a probe head for liquids
Starter Kits also available, consisting of:
Ì Testo 206 instrument
Ì Belt / wall holder
Ì 2 x 250ml buffer solution with dosing chamber (pH4 and pH7)
Ì High standard aluminium storage case
Parameters
Sensor
Measurment channels
Measuring Range
Resolution pH
Resolution Temperature
Accuracy pH
Accuracy Temperature
pH / °C
Temperature compensation
pH electrode / NTC Display
2
Probes
0pH to 14pH
Measurement rate
0.01 pH
Operating temp
0.1°C
Storage temp
±0.02 pH
Battery
±0.4 °C
Battery Life
Primo
Primo5
1999 mg/l
1999S/cm
1mg/l
1S/cm
1.5% full scale
1S/cm
Automatic
auto at 1413 S/cm
auto from 0 to 60°C with ß = 2%/°C
250h, 2 x 1.5V
80g
228161
Price Each
Order Code
Primo5
327-7161
1+
Test Equipment – Environmental, HVAC & Pressure
pH Meter
Range
Resolution
Accuracy
Calibration
Temp compensation
Battery life/type
Weight
Power, Test and Measurement
pH
Easy-to-use portable pH/temperature meter with
mV range ion selective electrode work and redox
measurements. For easy and speed of use the meter benefits from auto or manual temperature compensation and auto calibration with three standard
pH buffers recognised.
Self-diagnostic error codes are displayed on the
LCD for example, to indicate an incorrect buffer or
defective electrode so that problems are quickly
and easy corrected by the user. Supplied complete
with general-purpose epoxy-bodied pH electrode
and temperature probe.
Automatic
LCD, 2 line, 0 to 70°C
Screw-in pH / °C probe modules
2 measurements per second
0°C to +60°C
-20°C to +70°C
1x CR2032
80 hours (auto off 10 min)
377679.381254
3397
3398
farnell.com
Mftrs.
Liquid Testers - continued
Price Each
List No.
Conductivity, pH and TDS Meter
Order Code
HI-991300
HI98129 and HI98130
Ì Dual level display shows pH or EC/TDS with C
Ì Waterproof immersion proof casing (also floats)
Ì Replaceable pH electrode cartridge
Ì Automatic calibration & temperature compensation
pH and Conductivity
Power, Test and Measurement
These pocket meters are fully automatic and combine several parameters within a compact
and waterproof case. Temperature compensation and calibration is automatic and the meters also incorporate a reading stability indicator to ensure false readings are not taken.
Measure either pH, conductivity or Total Dissolves Solids together with temperature in either °C or °F. All readings are clearly shown on the dual level LCD display.
Ì 460ml plastic screw top bottles
Ì Available for both conductivity and pH calibration
Ì Ready to use calibration standards
Ì Supplied with calibration chart
222570
Price Each
pH buffer solution
Order Code
pH4.01
pH7.01
pH10.01
Conductivity calibration solution
1413 µS/cm
84 µS/cm
710-7377
710-7389
Moisture Meters
Price Each
Description
List No.
Order Code
Combo Meter
Combo Meter
Electrode Cleaning Soln
HI98129
HI98130
HI7061
505-7437
505-7449
505-7292
1+
Moisture Meter
Measures the moisture level in sawn timber
(also cardboard or paper) and hardened materials (plaster, concrete and mortar).
Hand-Held Conductivity Meter
W=47 H=139 D=25mm. Weight 93g
HI 8733
Designed for use in quality control, industry, production areas, general laboratory and field use, the
HI-8733 uses a single, easy-to-clean multirange
PVC probe with four stainless steel rings to measure from de-ionised water to brine. Single point
calibration gives accurate readings accross the entire range and a built-in temperature sensor provides automatic temperature compensation. Temperature coefficient is adjustable from 0 to 2.5%
/°C. Supplied complete with probe and battery.
Measuring Principle Electrical Resistance
Electrodes
8mm integrated electrodes, replaceable
Measuring Range Wood: 6-44% Material 0.2-2%
Accuracy Wood: ±1% Material: ±0.05%
Power 3 x AAA
446883.430817
Price Each
Order Code
1+
127-0535
Test Equipment – Environmental, HVAC & Pressure
Moisture Meter
Ì
Ì
Ì
Ì
Ì
Ì Microprocessor hand-held conductivity meter
Ì Single probe covers the range: de-ionised water
to brine
Ì Single point calibration
Ì Automatic temperature compensation
Range
1+
710-5423
710-5435
710-5447
339518
Mftrs.
1+
327-7197
Pre-mixed Calibration Solution
HI98129
HI98130
Range
EC: 0 to 3999μS/cm
0 to 20mS/cm
TDS: 0 to 2000ppm
0 to 10ppt
pH: 0 to 14pH
0 to 14pH
Temp: 0 to +60°C and 32 to +140°F both meters
Resolution EC: 1μS/cm
0.01mS/cm
TDS: 1ppm
0.01ppt
pH: 0.01pH
0.01pH
Temp: 0.1°C & 0.1°F
0.1°C & 0.1°F
Accuracy
EC/TDS: ±2% full scale both meters
pH: ±0.05pH both meters
Temp: ±0.5°C or ±°F
Calibration 1 or 2 points automatic for pH, 1 point automatic for pH, 1 point automatic for EC/TDS
CompensationTemperature automatically compensated for in all ranges
Electrode
HI73127 pH electrode cartridge (supplied)
Power Supply 4x1.5v batteries, 100 hours use
51
2-in-1 digital and analogue moisture meter
Large LCD display
Wood - Range: 6-44% Accuracy: ±1%
Material - Range: 0.2-2% Accuracy: ±0.05%
Dimensions (WxHxD): 40 x 130 x 33mm. Weight 99g
0.0 to 199.9μ S/cm
0 to 1999μS/cm
0.00 to 19.99mS/cm
0.0 to 199.9mS/cm
0.1µS/cm, 1µS/cm, 0.01mS/cm, 0.1mS/cm
± 1% full scale
Manual single point through trimmer
Automatic with a compensation of 0 to 2.5% per °C
9V PP3, 100 hours
185 x 82 x 45mm
HI-8733
355g
Resolution
Accuracy
Calibration
Temperature compensation
Battery type / life
Dimensions
Mftrs. List No.
Weight
224545
Price Each
Order Code
486672.465666
1+
Price Each
710-7110
Order Code
1+
5+
143-0726
Combined pH/Conductivity/TDS Meter and
Thermometer HI-991300
Price Each
Simply press a button to go from one parameter to the next. Calibration is automatic for ease of use with auto-buffer recognition. The LCD
is dual level with a continuous temperature display in either °C or °F,
and with a stability indicator to ensure accuracy. Ideal for industrial,
production and field use, saving both time and resources. Supplied
with combination probe/electrode and battery.
Ì Measuring pH, conductivity, TDS and temperature all with one
probe
Range pH
Conductivity
Temperature °C
Calibration
Conductivity
0pH to 14pH
0 - 3999 μS/cm
0 - 1999ppm
0 - 60°
1 or 2pt(4.01, 6.86, 7.01, 9.18, 10.01)
1 pt at 1382ppm or 1413μS/cm
Resolution
0.01
1 μS/cm
1ppm
0.1
Accuracy
±0.02
2% full scale
±0.5
Battery/life
4 x AAA, 500h
224550
3398
element14.com
S
N
Standard Calibration Charge
UKAS Calibration Charge
Pocket Moisture Meters
606-1 & 606-2
Available in two models:
606-1 material moisture
606-2 material moisture, air temperature and humidity
Ì Measurement of wood moisture e.g. beech, spruce,
larch, oak, pine
Ì and maple
Ì Curves for cement screed, concrete, plaster, anhydrite,
cement mortar, lime and brick
Ì Hold and auto-test functions
Ì Backlit display
Ì Auto-off
606-2 Additional features:
Ì Air temperature and humidity measurement for monitoring drying processes
farnell.com
Both models supplied with Calibration protocol, wrist strap,
belt holder, protective cap & batteries
Measuring Range
Resolution
Accuracy
Units
Operating Temperature
Battery Type
Battery Life
Dimensions
element14.com
Pressure and Flow Meters
512
Moisture
Air Humidity (606-2 only) Air Temp. (606-2 only)
0 to 90%
0 to 100%rh
-10 to 50°C
0.1
0.1%rh
0.1°C
± 1% (Conductivity) ± 2.5%rh (5 to 95%rF
± 0.5°C
%rh, wet bulb, dewpoint
°C/°F
-10 to 50°C
Alkaline (2 x AAA)
200hrs (606-1), 130hrs (606-2) (average, without display illumination)
119 x 46 x 25mm (Incl. Protective Cap)
A range of 4 instruments for the measurement of pressure and velocity. All
of the instruments can be used with the
testo printer (836-9240) to provide onsite documentation of readings with
date/time and minimum/maximum values. Also available is a TopSafe case
(108-2989) to protect your instrument
from dirt, water and impact.
488398.503097
Price Each
Mftrs. List No.
Order Code
606-1
606-2
1+
147-1400
147-1401
W=57 H=202 D=42mm.
Weight 300g
Pressure & Calibration
510
Ì Measuring range of 0 to 100 mbar
Ì Temperature compensation
Ì Magnetic base for hands free instrument mounting
Ì Flow velocity measurement with Pitot
tube
Ì Air density compensation
Ì Backlit display
Ì Auto-off
Supplied with Calibration protocol, wrist
strap, belt holder, protective cap & batteries
Measuring Range
Resolution
Accuracy
488182.503092
Price Each
Mftrs. List No.
510
Order Code
1+
147-1394
Simultaneous display of flow and pressure value
8 units for pressure: kPa, mbar, bar, mm H2O, mmHg, psi, inch H2O, inch Hg
2 units for flow: m/s, fpm
Built-in density compensation
Smoothing adjustable between 1 to 20 display refreshes (0.5 s) as rolling mean
Readings printout with date/time and min./max. values
Hold/Max/Min function
Backlit display
2 years warranty
Model
108-3007
108-3008
Pressure Measurement
Probe Type
Measuring Range
Resolution
Overload
0mbar to 2mbar
0.001 mbar
±10 mbar
Built-in Pressure Probe
0mbar to 20mbar 0mbar to 200mbar
0.01 mbar
0.1 mbar
±200 mbar
±2000 mbar
Pitot Tube
2 to 17.5 m/s
0.1 m/s
Pitot Tube
5 to 55 m/s
0.1 m/s
Pitot Tube
10 to 100 m/s
0.1 m/s
No Flow
0.5% of fsv
0 to 60°C
120 hours
0.5% of fsv
0 to 60°C
120 hours
0.5% of fsv
0 to 60°C
120 hours
0.5% of fsv
0 to 60°C
120 hours
Flow Measurement
Probe Type
Measuring Range
Resolution
General Specifications
Accuracy ±1 digit
Operating Temperature
Battery Life
Description
108-3007
108-3008
108-3009
108-3010
Accessories
Meter / Probes Case
Protective Case
108-3011
108-2989
Hand Held Digital Manometers
Supplied with Calibration protocol, wrist
strap, belt holder, protective cap & batteries
511
Order Code
147-1395
1+
Model
Operating Range
2001P 2002P 2003P 2005P 2021P 2022P 2023P 2081P 2082P 2083P
130
1999 7 Bar 7 Bar Select- Select- Select- Select- Select- SelectmBar mBar
able
able
able
able
able
able
Scale Scale Scale Scale Scale Scale
Backlight
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Zeroing
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Hold
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Range Lock
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Max/Min
Ì
Ì
Ì
Ì
Ì
Ì
Smoothing
Ì
Ì
Ì
Ì
Ì
Ì
Units of Pressure
Ì
Ì
Ì
Ì
Ì
Ì
Datalogging
Ì
Ì
Ì
Operating Temperature 0°C to 50°C
51
1+
The 2000P series of hand held manometers represents a new standard in pressure measurement, ease of use and accuracy of reading. Selected models feature automatic leak testing and logging
Ì Pressure ranges from 25mbar to 7
bar
Ì Scales in mbar, bar, psi, inH2O, in
HG, mmH2O, mH2O, mm/cm/mHg,
Pa and kPa
Ì Accuracy perfomance 0.2% of reading
Ì Automatic zero calibration for added
accuracy
Ì Logging mode for storage, retrieval
and output readings
Ì Long battery life 200 hours
Ì Sealed to IP67
Ì Measures absolute pressure - For absolute pressure compensation at duct
measurements with pilot tube
Ì Calculation of barometric pressure
Ì Barometric altitude measurement
Ì Backlit display
Ì Auto-off
488347.503093
Order Code
Manometer, 0-2mbar
Manometer, 0-20mbar
Manometer, 0-200mbar
Manometer, 0-2000mbar
2000 Series
Price Each
0mbar to 2bar
1 mbar
±4000 mbar
418790
511
300 to 1,200 mbar
0.01 mbar
± 3.0mbar
hPa, mbar, Pa, mmH2O, mmHg, inH2O, inHg, psi, m, ft
0 to 50°C
Alkaline (2 x AAA)
500 hrs (average, without display illumination)
119 x 46 x 25mm
108-3010
Price Each
Pocket Manometer - Absolute Pressure
Measuring Range
Resolution
Accuracy
Units
Operating Temperature
Battery Type
Battery Life
Dimensions (Incl. Protective Cap)
108-3009
Test Equipment – Environmental, HVAC & Pressure
Units
Operating Temperature
Battery Type
Battery Life
Dimensions (Incl. Protective Cap)
0 to 100 mbar
0.01 mbar
± 0.03 mbar (0 to 0.30 mbar)
± 0.05 mbar (0.31 to 1.00 mbar)
± 0.1mbar +1.5% of m.v. (1.01 mbar to 100 mbar)
hPa, mbar, Pa, mmH2O, mmHg, inH2O, inHg, psi, m/s, fpm
0 to 50°C
Alkaline (2 x AAA)
500 hrs (average, without display illumination)
119 x 46 x 25mm
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Power, Test and Measurement
Pocket Manometer - Differential Pressure
Mftrs. List No.
3399
Battery Type 2AA
3399
3400
farnell.com
Pressure & Calibration - continued
Model
Operating Range (Low Range)
Operating Range (High Range)
Accuracy
Hand Held Digital Manometers - continued
2000 Series - continued
493259
Mftrs.
Price Each
List No.
Order Code
Power, Test and Measurement
2001P
2002P
2003P
2005P
2021P
2022P
2023P
2081P
2082P
2083P
(SC6/NC6)
(SC6/NC6)
(SC6/NC6)
(SC7/NC7)
(SC8/NC8)
(SC6/NC6)
(SC8/NC8)
(SC8/NC8)
(SC8/NC8)
(SC8/NC8)
P200 AHIS
P200 ULIS
0 to 199.9 mBar
0 to 19.99 mBar
0 to 2 Bar absolute
0 to 100 mBar
±(0.1%rdg + 0.1%fs + 1d) (20 to 30°C)
±(0.15%rdg + 0.15%fs + 1d) (-20 to 50°C)
4000 mBar
1000 mBar
9V PP3 giving approx. 100 hours life
70 x 140 x 26mm
250g
Maximium Over Pressure
Battery
Dimensions (WxHxD)
Weight
493315
151-1085
151-1086
151-1088
151-1089
300-3360
493-855
493-867
493-879
493-880
207-597
Mftrs.
Price Each
List No.
Order Code
P200AHIS
P200ULIS
Pressure Calibrator
Fluke 718 30/100 psi
The new Fluke 718 Pressure Calibrator presents a fresh alternative in pressure calibration. A complete, self-contained calibration
solution, the 718 offers:
Ì Built-in pressure/vacuum hand pump,
with vernier and bleed valve
Ì Pressure measurement to 0.05% of full
span, using an internal pressure sensor
Ì Wide range of selectable measurement
units for pressure
Ì Current measurement with 0.025% accuracy and 0.001 mA resolution
Ì 24 volt loop power supply
Ì Min-Max Hold functions
Ì Compact size and weight
Ì Simple, push-button user interface
Ì Rugged and reliable, for field use
S
S
S
N
N
N
Differential Manometers
PM Series
Using measurement technology developed from the 2000 Series the
PM range offers good performance at an affordable price.
Specifically designed for engineers using twin tube connections, the
PM range is ideal for soundness testing and setting up boiler differential gas pressures. Manufactured from tough ABS plastic, this water-resistant instrument is supplied with a rubber boot to provide
added protection during routine use. It can be magnetically attached
for ease of use, and the back lit LCD allows easy viewing of the display in poor light conditions.
The PM series is a suitable replacement for the conventional U-tube,
having a fast response coupled with high accuracy and at low cost.
Instruments are available with alternative pressure measurement
units as factory set options or as a selectable option on the PM-80
which also incorporates a smoothing and min/max function.
Test Equipment – Environmental, HVAC & Pressure
Ì Differential Input - 8mm tube connectors
Ì Water Resistant (IP67 rated)
Ì Rugged case with protective rubber
boot
Ì Magnetic attachment or tilt stand
Ì Push button Zero and Hold features
Ì Backlit Digital Display
Ì Auto Power Off after 12 minutes
Ì 0.01 resolution up to 19.99 mbar,
then auto switches to 0.1 resolution
Ì Measurement unit options (Selectable on the PM80)
Operating temperature
Battery type
Battery life
Display
Environmental
-10°C to 50°C (ambient)
2x AA (supplied)
Approx 200 hours
12.7mm custom LCD
Water resistant
(IP67 with hoses connected)
Auto power off
12 minutes
Accuracy
0.2% of reading+0.2 of full scale
+1 digit (over -10 to 50°C)
Resolution
0.01 up to 19.99mbar then auto
ranges to 0.1 up to 130mbar
Dimensions
155x67x40mm
Weight
180g
Units of measurement PM20 - mbar
Selectable
PM80
339435
Mftrs.
Price Each
List No.
Order Code
PM20 mbar
PM80 selectable
1+
500-4536
500-4603
Operating Modes
Measure pressure (using internal sensor)
Measure current
Measure current and supply loop power
Pressure Specifications (internal sensor
Range
0-30psi (207kpa)
0-100psi (690kpa)
Resolution
.001psi (.01kPa)
.01psi (.01kPa)
Temp Coeff.
-10 to 18°C
28 to 55°C
±.01% of range per °C
Accuracy
.05%FS
.05%FS
Engineering Units (in Hg)
PSI, in. H20 (4°C) in H20 (20°C), kPa, cm H20 (4°C), cm H20 (20°C), BAR, mBAR, kg/cm2, mmHg, in
Hg
Media
Gasses/Liquids (non corrosive)
Pressure
F.S. on 30G
F.S. on 100G
Current Specifications
Range
0 to 24mA
Input/Output
Pressure Input
Pressure module
Current input
Loop Supply
Voltage No.
Power
Battery Life
Safety
EMC
Resolution
.001mA
mA +5°C
.025% Rdg +1 count
24 Volts
Two 9 volt alkaline batteries
ANSI/NEDA 1604A or IEC 6LR619V
4 to 20 hours, depending on functions used
CSA C22.2 No. 1010.1:1992
EN50082-1:1992 and EN55022:1994 Class B
228159
Price Each
P200 Series
Mftrs. List No.
IS certified by BASEEFA for use in inflammable or explosive atmospheres, the units are classified as EEx ia IIC
T4. This certification is equivalent to EN 50 014:1997 +
Amendments 1&2 and EN50 020:2002. The units are
ready for site use anywhere, immediately. P200 instruments are suitable for use with non-corrosive, non-ionic
liquids and gases. Liquid pressure can be measured using an air buffer. Case proven their tough construction
makes them extremely durable and, therefore functional
in not only hazardous atmospheres but also rough environments.
Certified to EEx ia IIC T4
High accuracy
Choice of pressure ranges
Robust case
Clear, digital display
Battery low indication
Auto range
Quality electronics give excellent reliability
Easy to use
Temp Coeff. 18°C/to 55°C
+/- .005% or range per °C
1/8 in. NPT pressure fitting
input LEMO connector
shrouded banana jacks
Intrinsically Safe Digital Manometers
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
1+
151-1083
151-1084
Price Each
Standard Calibration Charge
Standard Calibration Charge
Standard Calibration Charge
UKAS Calibration Charge
UKAS Calibration Charge
UKAS Calibration Charge
51
3400
1+
element14.com
FLUKE 718/30
FLUKE 718/100
Order Code
1+
318-3324
318-3336
INTELLIGENT ONLINE BUYING
SYSTEM PROVIDING
Complete cost control, reduced
administration time, visibility of your
spend, flexibility and personalised to
your company’s needs.
farnell.com/ibuy
farnell.com
Fluke Pressure Calibrators
Compact sound level meter measures less than 9" in length, including the windscreen, yet provides selectable response time and frequency weighting. It is perfect for sound system testing, speaker
system measurement and environmental noise level monitoring.
Frequency range
Measuring level range
Frequency weighting
Microphone
Display
Display count
Time weighting
Level ranges
Accuracy
Power supply
Operating temperature
Dimensions
Weight
Price Each
Sound Level Meter
-12 to 36 psi,
-850 mbar to 2.4 bar
-12 to 120 psi,
-850 mbar to 8 bar
24 V dc
0.001 psi, 0.1 mbar
0.025 % range for 6
months.
0.035 % of range for
one (1) year
± 10 %
S
1+
165-9632
165-9633
USB interface with datalogging software
Internal datalogging
A and C weighting
Selectable fast / slow response time
Large 1999 count backlit LCD display
Analog bargraph display and numerous on-screen icons
AC/DC outputs for level recorder
Self calibration with internal oscillator
Selectable MIN or MAX hold and data hold function
Three measurement ranges
0.1dB resolution
Selectable auto-power-off
Threaded insert which accepts standard tripod mount
Removable windscreen
51
Kit Contents: Sound Meter, Windscreen, USB Cable, Software, 9V
Battery, Case and Instruction Manual.
Sound Level
Analogue Sound Level Meter
Ì Analogue sound level meter ideal for monitoring noise levels in the work place
Ì Measurements are indicated on a clear graduated scale
Ì Calibration can be checked and adjusted via an internal
sine wave oscillator
Ì Supplied with a soft carry case
Ì Requires a 9V PP3 heavy duty battery
Range
Resolution
Accuracy
Frequency range
31.5Hz to 8kHz
Measuring level range 30dB to 130dB
Frequency weighting A/C
40 to 80dB (Lo) / 80 to 120dB (Hi)
2dB increments
± 3% to JISdB(A) standard
Microphone
Display
Display count
Time weighting
Level ranges
12.7mm electret condenser
LCD
1999
FAST (125mS), SLOW (1
sec.)
Lo: 30dB to 100dB
Med: 50dB to 100dB
Hi: 60dB to 130dB
Auto: 30dB to 130dB
Accuracy
AC output
±1.4dB @ 1kHz
1Vrms at full scale, output impedance approximately 100Ω
DC output
10mV / dB, output impedance
approx 1kΩ
Power supply
9V battery or AC adaptor
Operating temperature 0°C to 40°C
Dimensions
247.65 x 63.5 x 25.4mm
Weight
350g
653368
Price Each
224561
Price Each
Order Code
1+
Mftrs. List No.
Description
72-947
Sound Level Meter
Order Code
1+
208-3812
Price Each
723-0564
Standard Calibration Charge
Test Equipment – Environmental, HVAC & Pressure
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Price Each
Order Code
1+
208-3810
USB Interface
524988
FLUKE-719 30G
FLUKE-719 100G
Order Code
Digital Sound Level Meter
Accuracy
N/A
Description
72-942
Price Each
Resolution
0.01 psi, 1 mbar
Mftrs. List No.
Standard Calibration Charge
Range
Mftrs.
List No.
31.5Hz to 8kHz
30dB to 130dB
A/C
12.7mm electret condenser
LCD
1999
FAST (125mS), SLOW (1 sec.)
Lo: 30dB to 100dB
Hi: 60dB to 130dB
±1.5dB @ 1kHz
9V battery
0°C to 40°C
209.55 x 57.15 x 31.75mm
230g
Power, Test and Measurement
Loop supply
Selectable MAX hold and data hold function
Two measurement ranges
Large 3/4" digit LCD backlit display
Threaded insert for tripod mount
Auto power off
1999 count display with 0.1dB resolution
Removable windscreen
653363
-30 °C to 60 °C
-10 °C to 55 °C
95 % (-10 °C to 30 °C);
75 % (30 °C to 40 °C); 45 %
(40 °C to 50 °C); 35 % (50 °C to 55 °C)
1 meter drop test
CSA C22.2 No. 1010.1:1992
EN50082-1:1992 and EN55022:1994 Class B
210 mm x 87 mm x 60 mm
912 g
Two 9 V alkaline batteries
12 hours with 12 mA into 500 Ω, 200
pump cycles to 100 psi, 500 pump cycles to 30 psi
Shock:
Safety:
EMC:
Size (HxWxD):
Weight:
Battery:
Battery life:
Fluke-719 100G
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Kit Contents: Sound Meter, 9V Battery, Carrying Case and Instruction Manual.
General specifications
Storage temperature:
Operating temperature:
Relative humidity:
3401
Digital Sound Level Meter
Ì Electric pump for one handed pressure calibration
Ì Best in class pressure measurement uncertainty of
0.025%
Ì Measure and source mA with best in class 0.015% accuracy
Ì Precision pressure adjust vernier
Ì Variable release rate bleed valve for easy pressure adjustment
Ì Ideal performance for high accuracy transmitter calibration
Ì 30 PSI and 100 PSI pressure ranges
Ì Programmable pump limit
- Eliminates over-pressurization
- Allows the user to program target pressures for pumping
Ì Extended measurement range with any of twenty-nine (29)
700Pxx Pressure Modules
Ì Source mA with simultaneous pressure measurement to
test valves and I/Ps
Ì Simulate mA signals to troubleshoot 4-20 mA loops
719-100G
Ì Test pressure switches with built n switch test function
Ì Power transmitters during test using 24 V loop supply
Ì Proven cleanout ports reduce pump failures
Includes: TL75 Test leads, AC72 Alligator clip set, Push fit connectors, Translucent test
hose, Product overview manual (print), and User’s manual (CD-ROM) in 14 languages
Specifications
Function
Measure or Source
Fluke-719 30G
element14.com
S
FREE GLOBAL LEGISLATION SUPPORT
RoHS, REACH, WEEE, ErP, Batteries
Directive - latest updates, free white
papers and live online Q&A at
element14.com/legislation
The first online technical portal for design engineers
Log on, research, refine and design
3401
3402
farnell.com
Sound Level - continued
element14.com
Digital Sound Lever Meter
An easy to use, hand-held, digital sound level meter.
Sound Level Calibrator
Ì 94dB and 114dB Sound Calibration at 1kHz
Ì Accurate and simple to use
Ì Fits 1/2" diameter microphone
Output sound pressure levels
Output frequency
Reference temperature conditions
Atmospheric pressure
Relative humidity
Accuracy of sound pressure level
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
114dB and 94dB re 20 μPa under reference
conditions
1000Hz, ±4%
> 23°C (73°F)
> 1013 mbar (760mm of Hg)
> 65%RH
±0.5dB Under stand reference environment
conditions
Range
35-80dB/50-100dB/80-130dB
Resolution 0.1dB
Accuracy ± 1.5dB at 1kHz(94dB level)
653751
Price Each
Power, Test and Measurement
Mftrs. List No.
Description
Order Code
72-853
Sound Level Calibrator
A weighting
3 ranges, 35-130dB measurement
31⁄2 digit LCD
Fast response
Meets IEC 651 type 2 standards
Over and under range indicator
Data hold
Includes owner manual
Requires 9V battery (not included)
CE marked
H=25, W=67
228191
1+
Mftrs.
208-3811
Price Each
List No.
Ì Designed to meet the measurement requirements of Safety
Engineers, Health, Industrial safety offices and quality control in various environments.
Ì A and C weightings for checking compliance with safety
regulations as well as acoustic analysis
Ì Measuring ranges:
A Weighting 30 ∼130dB
C Weighting 35∼130dB
Ì Frequency range: 31.5Hz∼8KHz
Ì Display with 0.1dB steps on a 4 digits LCD
Ì Slow (1 sec) and fast (125ms) response settings to check
peak and
average noise levels
Ì MAX/MIN recording
Ì Data Hold to freeze reading on digital display
Ì Accessories supplied: Carrying case, windscreen, user
manual and 9V Battery
Ì CE, designed to meet IEC651 Type2, ANSI S1.4 Type2
Test Equipment – Environmental, HVAC & Pressure
525726
Mftrs.
Price Each
List No.
Order Code
SM-10
1+
72-860A
The 72-860A is a hand held, general purpose sound meter for
type 2 measurement.
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Range
Resolution
Frequency Range
Accuracy
AC output
DC output
Dimensions
A and C weighting
351⁄2 digit LCD
35-130dB measurement
2 ranges
Meets IEC 651 type 2 standards
1⁄2" condenser microphone
Fast and slow dynamic response
Over and under range indicator
Maximum level hold
Internal oscillator for calibration
AC and DC signal output
RS232 interface
Includes owners manual, 9V battery, carrying case, RS232
interface cable wind screen and adjustment screwdriver
35-90dB(low),75-130dB(high)
0.1dB
30Hz to 12kHz
± 2.0dB at 1kHz(94dB level)
0.65 V RMS corresponding to each range step
10mV/dBm nominal
66.68 (W) X 241.3 (L) X 25.4 (H)
336783.343913
167-1225
Mftrs.
Price Each
Standard Calibration Charge
S
Sound Level Meter
Ì Complies to IEC61672-1 class 2, ANSI S1.4 class 2
Ì 1⁄2" electret condenser microphone
Ì MAX and MIN measurements
Ì Over and Under range display
Ì Frequency weighting A and C to respond for human sense or machine
monitoring
Ì Fast and slow time constant setting
Ì AC/DC voltage outputs for attachment
to frequency analyser etc
Ì Auto or manual ranging
Ì Large backlit LCD display with Bargraph
Ì User calibration via externally accessible potentiometer
30 - 130dB
50dB
±1.4dB
0.1dB
31.5Hz to 8kHz
A, C
Time Weighting
Display Update
Analogue Output
Dimensions (WxHxD)
Weight
Fast (125ms), Slow (1s)
2 times per second
AC = 1Vrms, DC = 10mV/dB
76 x 278 x 50mm
350g
Includes: tripod, windshield, battery, UK mains adaptor, 2m USB cable, software CD,
instruction manual and carry case
486564.465171
Price Each
Order Code
1+
3+
143-0720
Price Each
Standard Calibration Charge
UKAS Calibration Charge
S
N
Price Each
List No.
Order Code
72-860A
490-8430
1+
Sound Level Meters
815
testo 815: The ideal instrument for daily use. Whether it is for air conditioning or heating, disco noise, machine noise or
noise in combustion systems.
Common Features:
Ì Accuracy class 2 according to IEC 60651
Ì Easy to adjust (calibration screwdriver included)
Ì Frequency weighting according to characteristic line A and C
Ì Max / Min memory
Ì Built-in stand screw /(1/4 inch)
Ì Switchable time weighting Fast / Slow
Measuring Range
Accuracy ±1 digit
Resolution
Battery Life
32 to 130dB°C
Class 2 ± 1.0dB
0.1dB
70 hours
W=55 H=255
D=43mm. Weight 195g
Sound Level Calibrator:
Sound level measuring instruments should be re-calibrated
in case of changes in place or temperature. With the help
of the calibrator, available as an accessory, both instruments can easily be controlled and adjusted. Two levels
can be adjusted (94 and 114 dB). It is as well suited for
1/2 inch and 1 inch microphones of other makes.
Accuracy
Sound Pressure Level
Frequency
Battery Life
3402
1+
356-2657
378-5786
Digital Sound Level Meter
51
Level Range
Dynamic Range
Accuracy
Resolution
Frequency Range
Frequency Weighting
Order Code
72 - 6635
PP3 Battery
Sound Meter
± 0.5dB
94dB / 114dB switchable
1kHz
40 hours
farnell.com
418997
Price Each
Description
Order Code
815 Sound Level Meter
Sound Level Calibrator
1+
element14.com
Mercury Free Thermometer
Brannan
12/408/3
200mm white case with blue temperature scale and push button re-set.
Unique blue filling (Patent pending no. 00/54014) for a safer environment
108-3015
108-3018
Ì
Ì
Ì
Ì
Ì
Ì
Thermometers
Thermometer Strips
Environmentally Friendly
Reliable and Accurate
Capable of Low Temperatures
Easy to Read
Push Button
Centigrade and Fahrenheit Scale
These self-adhesive thermometer foils are ideal
for situations in which ordinary thermometers
cannot be used, such as small or moving parts.
Once the temperature sensitive elements react
there is a colour change (to black) – this is permanent and is irreversible.
339920.277155
Mftrs.
Price Each
List No.
Size
50 x 18mm
Accuracy ±1°C of temperature rating
Storage Up to 2 years (longer if stored in a fridge)
Maximum storage temperature 25°C
Order Code
12/408/3
1+
505-3778
Clip-on Pipe Thermometer
Brannan
33/401/0
A robust dial reading thermometer in a 63mm
case with a chrome bezel and aluminium finish scale. A spring attachment on the back
provides a secure fitting to pipework. Ideal for
testing inlet and outlet pipework to boilers etc.
339938.268073
Order Code
Price Each
1+
Range: +116°C to +154°C
Range: +160°C to +199°C
499-0389
499-0390
Wall Thermometer
General Purpose
Ì General purpose wall thermometer
Ì Red spirit filled in moulded plastic case
Ì Temperature range of -20°C to +50°C
339923.277186
Mftrs.
Price Each
List No.
Order Code
33/401/0
Power, Test and Measurement
Ì Supplied in booklets of 10
Temperature Range
3403
1+
505-3845
51
Fridge/Freezer Thermometer
Ì Zoned red scale (non toxic liquid) to indicate fridge and freezer storage temperatures
224528
224525
Price Each
Price Each
Order Code
Order Code
1+
722-6410
Pen Type Test Thermometer
‘Quick Set’ Max-Min. Thermometer
Ì
Ì
Ì
Ì
Ì
1+
722-6366
31/160/0
Wall moumted max-min thermometer
Retains both highest and lowest readings
Easily resetable via push-button
No separate magnet needed
Temperature range of -30°C to +50°C
Ì 120mm stainless steel probe
Ì Battery included
Ì Range -50 to +150°C
446667.434979
Price Each
Order Code
1+
127-1860
Waterproof Pen Type Thermometer
The thermometer offers low cost, rapid response, high accuracy and ease of use with a
robust waterproof design. It is ideal for liquid
and semi-solid sampling. The probe protection sheath has a vent hole in the end so that
the instrument can be used as a stirrer and
display the sample temperature. The sheath
can be connected to the head of the unit and
used as a handle extension. Powered by 1 x
1.5V button cell battery.
224526.410622
Price Each
Order Code
1+
722-6342
TROUBLESHOOTING TIPS
Chat online to one of our
technical engineers at farnell.com
Ì IP-65 waterproof polycarbonate case
and sheath
Ì Push button membrane keypad and display
Test Equipment – Environmental, HVAC & Pressure
Ì Horizontal fridge/freezer thermometer
Ì Moulded in food-safe white plastic
Ì Will hang or stand on shelf
Ì 133mm length, 4mm dia. stainless steel
probe
Ì 10mm high contrast LCD display
Ì Supplied with probe protector sheath,
battery and instructions for use
3403
3404
farnell.com
Thermometers - continued
Min/Max Thermometer with Alarm
MST-9258
Waterproof Pen Type Thermometer - continued
Range
Resolution
-50°C to +150°C
0.1°C (-19.9° to 149°), 1° (others)
element14.com
Accuracy
Ì 100mm x Ø4mm stainless steel penetration probe with handle and 1m cable
Ì Audible alarm at programmable high/low
temperature limits
Ì Min/Max memory and data hold function
Ì Impact resistant case features desk stand
and cable storage compartment
Ì Auto power off and low battery indication
Ì 30mm LCD display with function indicators
Ì One second sampling rate
±1°C
333721.275379
Price Each
Order Code
1+
127-1859
Pocket Digital Thermometer
FM10
W=60 H=120 D=20mm. Weight 77g
Range
Resolution
-50°C to +150°C
0.1°C / 1°C
Accuracy
Battery
1°C
1.5V (included)
447222.435089
Price Each
Power, Test and Measurement
Ì C/F selection
Ì Data hold
Ì Low cost, high accuracy thermometer
Ì Water resistant
Ì Auto off after 35mins
Temperature range
Resolution
Accuracy
-50°C to 150°C/58°F to 300°F
0.1°C/F
± 1°C/± 2°F
Order Code
1+
127-6192
Sampling time
Battery
1.5sec
1.5V button
Digital Thermometers
Check Temp
339955.277395
Mftrs.
Ì Low cost high accuracy thermometer
Ì Fast acting stainless steel probe
Ì Inbuilt calibration test
Price Each
List No.
Order Code
FM10
1+
500-4469
Check temp:
Stick meter with pointed tip
probe
Check temp 1: With pointed tip probe and 1m
cable
Probe Thermometers
TPP-C Celsius
Range
Resolution
Accuracy
-50°C to +150°C
0.1°C
±0.3°C (-20 to +90°C)
±0.5°C (-50 to +20°C)
±0.5°C (+91 to +150°C)3000
Battery-life 3000 hrs continuous
Weight
80g50
222470
Price Each
51
Test Equipment – Environmental, HVAC & Pressure
Celsius probe thermometers ideal for testing and troubleshooting as quick reference in
HVAC and Industrial applications. Available as the TPP1-C1 for Immersion and TPP2-C1
for surface measurements.
Ì
Ì
Ì
Ì
Ì
Temperature range -50 to 250°C
0.1°C resolution
Data hold
Overload display
31⁄2 digit LCD
Ì
Ì
Ì
Ì
Ì
Mftrs. List No.
Order Code
CHECKTEMP 1
CHECKTEMP
710-5769
710-5757
Hand-held Thermometer
Long battery life 200 hours typical
CE rated
Flat surface probe section
Easy to read digital display
Slim compact style
FM31
Ì Supplied complete with hand-held instrument with
Lumberg connector, rubber boot and general purpose probe
Ì Water resistant
Ì Auto off after 3 mins
Ì Open circuit indication
489622.502897
Mftrs.
Price Each
Description
List No.
Order Code
Immersion
Surface
TPP1-C1
TPP2-C1
146-6474
146-6475
1+
1+
Thermistor probe range
Accuracy
Battery type
Battery life
Checkfridge Temperature Monitor
-40°C to +110°C
0.5%
PP3
3000h
624189
Ì Thermal probe with 1m cable designed to reach into
refrigerators and freezers
Ì Thermistor probe made of fast responding food grade
stainless steel and silicon cable are easy to keep clean
Ì Compact casing is durable and easy to keep clean
Ì Large, easy to read LED
Ì User can easily verify the status of the meter with Cal check feature
Ì Low battery warning "ERR" message displays when battery needs charging
Ì Magnetic backing provides an easy way to attach to metal refrigerators and freezers
Range
Resolution
Accuracy (@25°C/77°F)
All other ranges
Typical EMC Deviation
Calibration
Calibration check
Probe/Probe dimensions
Battery type/life
Dimensions/Weight
Price Each
Description
Mftrs. List No.
Thermometer
Order Code
FM31
1+
465-8607
Price Each
Standard Calibration Charge
UKAS Calibration Charge
S
N
Temperature Probe Style Meter
-50.0 to +220°C
Ì
Ì
Ì
Ì
Ì
0.1° (-50 to 199.9°C), 1° (200 to 220°C)
±0.3°C (-20 to 90°C)
±0.4% F.S
±0.3°C
Compact size goes and measures anywhere
Dual display for RH and Temperature
Put meter into metric or English for measurement results
Stores Min/Max readings for comparisons
Data Hold function
Internal 2 point
Manual with front mounted switch
Stainless steel, general purpose/ 40 x 5mm
(1.5 x .187") and 1 meter silicon cable
1 x 1.5V AAA / approximately 3000 hours of continuous use
92x36x28/65g
234811
Mftrs.
List No.
HI-14700
Price Each
Order Code
1+
369-5918
525732
Mftrs.
3404
Price Each
List No.
Order Code
TH-1
167-1228
1+
farnell.com
Digital Thermometer
2046T
Measurement Range
Best Accuracy
-40°C to +120°C
±0.3%
Power 1x 9V PP3 type battery – not supplied
Ì 4 Digit LCD diplay with dual readings and backlight
Ì °C/°F/°K measurements
Ì Dual probe inputs
Ì K, J, T and E type probe compatibility
Ì Max/Min/Dif/Avg temperature display with hold function
Ì Sleep mode and low battery warning
Ì USB data transfer and datalogging (software supplied)
Ì USB or 9V battery Power
Ì Supplied with 9V battery, software, USB lead, K type probe and user manual
72-7715 Additional Features
Ì Hi/Lo alarm and signal output
Ì User self-calibration
Ì Additional R, S and N type probe compatibility
510032.509478
Price Each
Mftrs. List No.
Order Code
72-7712
72-7715
Digital Thermometer
KM340
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Price Each
Description
List No.
Order Code
Thermometer
Probe, General Purpose
2046T.
H0234D
500-4275
877-1278
1+
Digital Thermometer
Ì Ideal for education
Ì Uses a miniature silicon sensor which
is precalibrated in factory to measure
a wide temperature range
Ì Highly accurate with a very fast response time
Ì Sensor is housed in a rugged, stainless steel penetration probe
Ì Large LCD display provides clear,
easy to read digits
-40°C to +150°C
0.1°C
0.5%
for one year
Battery life
Dimensions
Weight
approx. 900 hours
180 x 180 x 40mm
280g
Order Code
725-9256
Accuracy
Operating temperature
Battery type
Battery life
±(0.2% of reading +1°C)
0 to +50°C
PP3, IEC 6LF22
200 hours
Mftrs.
Price Each
HI-8751
Thermocouple Type K
°C / °F
-50°C to +1300°C
1°
selectable KM340: 1°
1+
Price Each
Description
List No.
Order Code
Differential thermometer
Surface probe
Air probe
KM340
SK21M
AK28M
858-8945
858-8961
858-8988
1+
Digital Thermometer
K Type Thermometers
72-2060/72-2065
Ì Measures in °C or °F (plus Kelvin for
ATK-610B only). User selectable
Ì Impact-resistant ABS case with protective rubber holster & flip out stand
Ì 45mm LCD display with backlight and
function indicators
Ì Sampling rate of 2.5 times per second
Ì Auto power off
Ì Max hold and data hold functions
Ì Over range indication
Ì Low battery indication
Ì Room temperature compensation
(ATK-610B)
Ì ATK-612 Dual Input Thermometer accepts 2 inputs with individual measurements or as differential measurements,
W=76 H=162 D=39mm. Weight 210g
T1 minus T2
These single and dual input K-Type therÌ Powered by 1x 9V battery (included)
mometers offer high accuracy and fast reÌ Supplied with carry case, rubber holsponse times. They are suitable for industrial
ster, 950mm bead probe & battery (2
and laboratory use.
bead probes with ATK-612)
Rugged, K type single and dual input thermometer, ideal
for field or bench use - includes protective holster.
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
31⁄2 digit LCD
Selectable °C/°F, 1° resolution
Front panel offset adjustment
Dual thermocouple input (72-2065)
Displays T1 and T2 and T1-T2 in differential mode (72-2065)
Data hold
Maximum record
Includes holster, 9V battery, owner manual, thermocouple
probe (includes two thermocouple probe)
Temperature range -50°C to +1300°C; -58 to 1999°F
Accuracy
-15°C to 0°C: ±2°C, 0°C to 1000°C: ±(0.3% + 1°C)
Dimensions
70 (W) x 146.05 (H) x 39 (D)
228184
Mftrs.
Price Each
Description
List No.
Order Code
Dual Channel
72-2065
342-1569
1+
Range
-50°C to + 1300°C (-58°F to 2000°F)
Resolution 0.1°C / 1°C
Dual Channel Digital Thermometers
Accuracy
0.5% (0 - 1000°C)
Accuracy (Bead Probe) ±2.2°C or ±0.75% of rdg
450385.460944
Models: 72-7712, 72-7715
Dual channel digital thermometers with backlit LCD displays and
multiple probe type compatibility.
Description
List No.
Order Code
Model
Total Range
Single Input
Dual Input
TK-610B
TK-612
129-7747
129-7748
72-7712
-250°C through
+1372°C
±0.5%
0.1°C
100 samples
Best Accuracy
Resolution
Data Logging
General
LCD Size (WxH)
32x30mm
Dimensions (WxHxD) 85x175x30mm
Weight
270g
72-7715
-250°C through
+1767°C
±0.2%
0.1°C
100 samples
51
382643
224539
Mftrs. List No.
Sensor type
Scales
Measurement range
Resolution
Type K thermocouple thermometer
Selectable 0.1°/1° resolution
Displays temperature in °C or °F
Maximum temperature memory
Hold function
Protective slip-on boot with desk stand
Sub-miniature connector
Twin inputs (differential)
For all HVAC usage including flow and return temperature
measurements and radiator output checks
Mfrs.
Test Equipment – Environmental, HVAC & Pressure
Range
Resolution
Accuracy
1+
156-3717
156-3718
339932.268050
Mftrs.
3405
Power, Test and Measurement
An attractive, hand-held thermometer giving a reliable and
cost effective solution to contact temperature measurements in a variety of applications including the food hygiene
market. Thermistor probe based. Exceeds the recommendations in the Food Hygiene Regulations.
Ì Attractive, robust case design with strengthened display
and re-enforced keypad
Ì Large LCD with backlight
Ì Suitable for use with thermistor type probes
Ì Autoranging display
Ì Display hold
Ì Self calibrated to zero to eliminate inaccurate readings
caused by long-term or thermaldrift
Note: The thermometer is not sup- Ì Selectable Auto switch-off
plied with a probe, see below for Ì Low battery indication
manufacturers recommended op- Ì 500 hours battery life (typical)
tion.
Ì Splashproof IP65 rated
element14.com
Price Each
1+
Price Each
Standard Calibration Charge
UKAS Calibration Charge
S
N
3405
3406
farnell.com
Price Each
Thermometers - continued
Mftrs. List No.
High Accuracy Dual Input Thermometer
This dual input K-Type thermometer offers high accuracy and fast
response times. Suitable for industrial and laboratory use.
Power, Test and Measurement
Ì Measures in °C, °F or Kelvin, user selectable
Ì Impact-resistant ABS case with protective rubber holster and
flip out stand
Ì 45mm LCD display with high intensity backlight and function indicators
Ì Sampling rate of 2.5 times per second
Ì Auto power off
Ì Max hold and data hold
Ì Over range indication
Ì Low battery indication
Ì Scan function for T1, T2, T1-T2, max, hold
Ì Room temperature compensation
Ì Dual Input Thermometer accepts 2 inputs with individual measurements or as differential measurements, T1 minus T2
Ì Supplied with carry case, rubber holster, 2 x 950mm bead probes & battery
Range
Resolution
Accuracy
Power
Dimensions (WxHxD)
Weight
-200°C to +1372°C
0.1°C / 1°C
0.5% (above -100°C)
PP3 battery
76 x 165 x 43mm
403g
480174.465850
Price Each
Order Code
1+
142-6143
1+
493-508
500-4366
500-4391
493-521
493-533
Microprocessor Thermocouple Thermometers
Ì
Ì
Ì
Ì
Ì
Ì
Range -200 to 1370°C
Resolution of 0.1 to 999.9°C
Use with any K type probe
K type with HI/LO recall
K type dual input
KJT type
Easy to use, splashproof thermometers which fit comfortably in the hand with a wrist strap for security and
optional protective rubber holster. Microprocessor controlled for 0.1 resolution, high accuracy and wide temperature range.
HI-93531 displays temperature in °C/°F and gives HI/LO
temperature memory and HOLD button.
HI-93531 & HI-93532
-200.0 to 1370°C/-300 to 2500°CF
Range (K)
(J)
(T)
Resolution
Accuracy
Battery life
Weight/Dimensions
0.1°C (200 to 999.9°C), 1°C outside
0.2% FS
1 x 9V/100h
320g/143 x80 x38mm
Price Each
List No.
A new range of microprocessor thermometers
with ease of use and accuracy of reading. The
2000T’s ability to self calibrate achieves longterm accuracy and stability, and eliminates
readings caused by long term drift. They have
a robust design, strengthened display, re-enforced key pad and isolated battery compartment.
51
Test Equipment – Environmental, HVAC & Pressure
Ì SpeedRead for quicker readings
Ì Logging mode for storage, retrieval and
output of readings
Ì Accurate performance: 0.2% of reading
Ì Automatic zero calibration
Ì Wide temperature range
Ì Last settings memorised
Ì Simple to operate
Order Code
HI-93531K
0.1° from -199.9°C to +199.9°C 1°C elsewhere
-10°C to +50°C (ambient)
2x AA batteries
Typically 500 hours
12.7mm custom LCD
Indicated by O-C on display
Out displayed
IP65
12 minutes
155x67x40mm
180g
1+
356-5105
Digital Thermometer
110
Ì Long battery life: typically 500 hours
Ì 200BT protective holder with tilt stand
Ì Three K type probes designed to give a
long life. The handles are ultrasonically
welded and can be scrub washed
Ì Rugged construction
Ì Fast response
An affordable thermometer designed to provide accurate
measurements for many general temperature applications.
The instrument’s robust engineering makes it ideal for refrigerated storage rooms, freezers/coolers, storage cabinets, and general outdoor use. In addition, the optional
TopSafe protective case guards against damage from water, impact and dirt. Minimum and maximum values are
shown on a clear, 2-line backlit display for easy reading. A
wide choice of probes for a range of applications are available. In addition, the testo 110 can be upgraded for use
with a wireless temperature probe.
-200°C to +1350°C
0.1% rdg ±0.2°C above -100°C
0.5% rdg ±0.2°C below -100°C
Ì User-adjustable audible alarm limits aid in temperature
control
Ì User-adjustable measuring rate (wireless mode) helps
save battery power
Ì On-site documentation with the optional Testo printer, for easy temperature recording
Ì 2 years warranty
-250°C to +400°C
±0.2°C over range -20°C to +70°C
0.1% rdg ±0.2°C elsewhere
Probes:
In order to meet a wide spectrum of measuring requirements, Testo provides a large range
of air, immersion, surface and penetration probes.
W=64 H=182 D=40mm.
Weight 171g
Instrument Accuracies
2000T and 2088T
Range
Accuracy
2006T
Range
Accuracy
2029T and 2098T
K range
T range
J range
N range
R and S range
Accuracy
Description
NTC Surface Probe
NTC Immersion Probe
-200°C to +1350°C
-250°C to +400°C
-750°C to +750°C
-200°C to +1300°C
0°C to +1750°C
0.1% rdg ±0.2°C above -100°C
0.5% rdg ±0.2°C below -100°C
2000T
K
2 pin mini
2006T
T
2 pin mini
Ì
Ì
2088T
K
2 pin mini
Ì
Ì
Ì
Ì
Ì
Range
-50°C to +150°C
-50°C to +150°C
Accuracy
± 0.2°C (-25 to 74.9°C)
± 0.2°C (-25 to 74.9°C)
t99 Order Code
35s 108-3805
10s 108-3852
418987.429029
Price Each
Description
2029T
KT JNRS
2 pin mini
Ì
Ì
Ì
Ì
2098T
KT JNRS
2 pin mini
Ì
Ì
Ì
Ì
Ì
Ì
222543
3406
2000T
2006T
2029T
2098T
K0234 Type K general probe
Mftrs.
2000 Series
Series Option Table
Model
Sensor type
Connector type
°C/°F
Hold
Range lock
Max./Min
Averaging
Logging
Order Code
228212
Hand Held Digital Thermometers
Common Specification
Resolution
Operating temperature
Battery type
Battery life
Display
Sensor open circuit
Overrange/Underrange
Environmental
Auto switch off
Dimensions
Weight
element14.com
Order Code
Digital Thermometer
108-3804
Probes
NTC Surface Probe
NTC Immersion Probe
108-3805
108-3852
Other Accessories
Instrument and Probe Case
108-3011
1+
farnell.com
Digital Thermometer
922 and 925
Testo 925: 925 Type K thermocouple thermometer uses both corded and optional wireless
probes. A user-adjustable audible alarm sounds if set limits are exceeded. Measurements,
as well as Max-Min values, with time/date can be printed on-site with the optional Testo
printer.
Ì 1 channel measuring instrument with optional wireless probe
Ì Audible alarm sounds if limit value is exceeded
Ì Continuous display of max/min values
Ì Hold button to freeze reading
Ì Backlit display
Ì 2 year warranty
Probe Type
Range
Accuracy
Resolution
Battery Life
t99
5s
25s
3s
Order Code
561-642
108-3022
108-3023
624209
Order Code
Price Each
1+
922 Differential Thermo
925 Differential Thermo
108-3019
108-3020
Probes
Type K Fine Wire Probe
Type K Air Probe
Type K Surface Probe
561-642
108-3022
108-3023
Other Accessories
Protective Case
IRDA Printer
108-2989
836-9240
t99
5s
25s
3s
12s
Order Code
561-642
108-3022
108-3023
108-3034
418940.429027
Price Each
Description
Order Code
735-2 Multi-channel Thermometer
1+
108-3031
Probes
Type K Fine Wire Probe
Type K Air Probe
Type K Surface Probe
PT100 Immersion Probe
561-642
108-3022
108-3023
108-3034
The new Fluke 50 Series II contact thermometers offer fast response and laboratory accuracy (0.05% +0.3°C) in a rugged handheld test
tool
51 and 52 Series II:
Ì Large backlit dual display shows any combination of T1, T2 (52 only), T1-T2 (52 only) plus MIN, MAX, or AVG
Ì Relative time clock on MIN, MAX, and AVG
provides a time reference for major events
Ì Electronic Offset function allows compensation of thermocouple errors to maximise
overall accuracy
Ì Measures J, K, T and E-types of thermoÌ Battery door allows easy battery recouples
placement without breaking the caliÌ Readout in °C, °F, or Kelvin (K)
bration seal
Ì Optional Tool Pak accessory for hang- Ì Sleep mode increases battery life
ing your thermometer (302-9578)
Temperature range
J-type Thermocouples
K-type Thermocouples
T-type Thermocouples
E-type Thermocouples
Price Each
Standard Calibration Charge
UKAS Calibration Charge
Accuracy
Class 2
Class 2
Class 2
Class A
S
N
Advanced Multi-channel Thermometer
Temperature accuracy
Above -100°C (-148°F)
J, K, T, E and N-type
Below -100°C (-148°F)
Battery life
Weight
-210°C to 1200°C (-346°F to 2192°F)
-200°C to 1372°C (-328°F to 2501°F)
-250°C to 400°C (-418°F to 752°F)
-150°C to 1000°C (-238°F to 1832°F)
± [0.05% +0.3°C (0.5°F)]
J, K, E: ± [0.20% +0.3°C [0.5°F]
T-type: ± [0.50% +0.3°C (0.5°F]
1000 hours typical, AA
400g
624750
Price Each
735-2
A highly versatile multi-channel temperature measuring instrument. The instrument has the capability to register and display up
to 6 temperature probes: 3 wireless probes, 2 fast thermocouple
probes (Type K / T) and one high precision PT100 probe. The testo 735 has a large measuring range - from -200 to +1350 °C (dependent on probe used). Two freely selectable temperature values
are shown in the easy to read backlit display.
The differential temperature between any temperature values can
be calculated. The display of minimum or maximum values is possible for all temperature channels.
The testo 735 is designed for ease of use. The easy to follow menus allow users to take key measurements including time and
point mean calculation, differential temperature measurement,
max/min value display and the fixing of measurement values. The
testo 735-2 offers 3 User Profiles (Standard, Route and Longterm)
which can be tailored to suit specific applications. For example,
using the Route function, users can easily select measurement locations and the Longterm function provides direct access to the
number of measurements and the measurement rate.
Mftrs. List No.
Order Code
FLUKE 51 SERIES II
FLUKE 52 SERIES II
TPAK
C101 Carry Case
1+
318-3361
318-3373
302-9578
947-9783
Price Each
Standard Calibration
UKAS Calibration
51
Test Equipment – Environmental, HVAC & Pressure
Accuracy
Class 2
Class 2
Class 2
Description
Range
-50°C to 400°C
-60 to 400°C
-60 to 300°C
-50°C to +400°C
Fluke 51II/Fluke 52 II
Probes:
In order to meet a wide spectrum of measuring requirements, Testo provides a large range
of professional probes for immersion, surface and air measurements.
Range
-50°C to 400°C
-60 to 400°C
-60 to 300°C
Description
Type K Fine Wire Probe
Type K Air Probe
Type K Surface Probe
PT100 Immersion Probe
Digital Thermometers
Thermocouple Type K
-50°C to +1000°C
0.3%
±(0.7°C + 0.5% of mv) (remaining range)
0.1°C / 1°C
Upto 200 hours
Probe Type
Type K Fine Wire
Type K Air
Type K Surface
Features:
Ì Connection of 3 attachable probes and 3 radio probes
Ì Data printing on testo report printer
Ì Audible alarm when limit values are exceeded
Ì System accuracy up to 0.05°C
Ì Display of Delta T, min/max and mean values
Ì Instrument store for 10,000 readings
Ì PC-Software for filing and documenting measurement data
Ì Storage of single measurements or measurement series by location
Ì Quick access to the most important functions via user profiles
Applications:
Ì Simultaneous measurement of several temperatures, e.g. in a refridgeration system
Ì Fast temperature measurement on surfaces
Ì Precise temperature measurements
Probes:
In order to meet a wide spectrum of measuring requirements, Testo provides a large range
of professional probes. The range includes a choice of PT100 and thermocouple (Type K /
T) probes for immersion, surface and air measurements. Thermocouple probes offer users
rapid measurements and a wide measuring range. The PT100 immersion/penetration probe
offers high accuracy (up to 0.05°C, resolution of 0.001°C), ideally suited for use as a
working standard in quality assurance, laboratories and calibration services.
3407
Power, Test and Measurement
W=64 H=182 D=40mm. Weight 171g
Testo 922: A differential thermometer with 2-line display for easy temperature comparisons. An optional wireless temperature probe makes remote temperature monitoring easy.
Differential temperatures are easily displayed, while an audible alarm sounds if user-adjustable limit values are exceeded. Current measurements and Max-Min values can be printed
on-site with the optional Testo printer. Timed-interval printing (eg. once per minute) is possible and controlled from the testo 922.
Ì 2 channel measuring instrument with optional wireless probe
Ì Displays differential temperature
Ì Cyclical printing of readings, e.g. once a minute
element14.com
S
N
FREE GLOBAL LEGISLATION SUPPORT
RoHS, REACH, WEEE, ErP, Batteries
Directive - latest updates, free white
papers and live online Q&A at
element14.com/legislation
W=74 H=220 D=46mm. Weight 428g
3407
3408
farnell.com
Thermocouple Type K
Thermocouple Type N
Thermocouple Type T
Thermocouple Type J
Thermocouple Type R and S
Scales
Digital Thermometers
Fluke 53/54 Series II
element14.com
-200°C to +1372°C
-200°C to +1300°C
-200°C to +400°C
-200°C to +1200°C
-50°C to +1767°C
°C, °F, °A
Resolution
Accuracy
Operating Temperature
Connector Type
0.1° below +1000°,
1° above (autoranging)
<±0.1% ±0.2°C
-20°C to +40°C
Sub-miniature
382644
Mftrs.
Power, Test and Measurement
51
Test Equipment – Environmental, HVAC & Pressure
3408
The new Fluke 53/54 Series II contact thermometers offer fast response and laboratory accuracy (0.05% + 0.3°C) in a rugged handheld test tool.
Ì Large backlit dual display shows any combination of T1, T2, T1T2, plus MIN, Max or AVG
Ì Relative time clock on MIN, MAX and AVG provides a time reference for major events
Ì Electronic Offset function allows compensation of thermocouple error to maximize
overall accuracy
Ì Measures J, K, T and E-types of thermocouples
Ì Readout in °C, °F or Kelvin (K)
Ì Sleep mode increases battery life
Ì Battery door allows easy battery replacement without breaking the calibration seal
Ì Optional Tool Pak accessory for hanging your thermometer (302-9578)
Ì Data Logging up to 500 points of data with user adjustable recording interval
Ì Additional thermocouple types R, S and N (for a total of 7 different types)
Ì Real time clock captures the exact time of day when events occur
Ì Recall funtion allows logged data to be easily reviewed on the meter display
Ì USB port allows data to be exported to optional Fluke View Temperature PC software
Fluke View Forms Software
Here’s a fast and easy way to document, store and analyse temperature measurements.
Ì Produce professional-looking documents
Ì In-depth analysis with records, charts and graphs
Ì Standard and customisable forms
Ì Export data to the measurement analysis programs
Ì Supplied with USB cable
Battery
1000 hours typical, AA Weight
Warranty 3 years
220406
Options
FLUKE-53-2 B 50HZ
FLUKE-54-2 B 50HZ
FlukeView Forms Software
Meter Hanging Kit TPAK80-4
C101 Carry Case
Price Each
Order Code
1+
193-6624
193-6625
392-7921
302-9578
947-9783
(SC8/NC8)
(SC9/NC9)
–
–
–
Price Each
Standard Calibration Charge
Standard Calibration Charge
UKAS Calibration Charge
UKAS Calibration Charge
858-8953
858-8961
858-8970
858-8988
1+
Intrinsically-Safe Thermometer
3208IS
This accurate and easy-to-use instrument
is certified for use in flammable or explosive atmospheres up to and including
Zone 0. The tough construction makes it
extremely durable and therefore functional in not only
hazardous atmospheres but also hostile working environments. To complement the 3208i.s the following
probes are available:
S004K Surface probe providing a fast response and
comprising a 3.5mm 1⁄2 disk to allow uniform pressure
on surface to be measured.
S10PK Exposed junction thermocouple, PTFE-insulated for general-purpose use.
Ì Certified to ATex directive 94191EC
Ì High accuracy: 0.2% F.S. at ambient
Ì High and low resolution
Temperature range
Sensor
Resolution HI
Resolution LO
Operating temperature (ambient)
Ì Wide temperature range
Ì Robust case
Ì One handed operation
-50°C to +950°C
Type Thermocouple Type K
0.1°C ±0.2% reading ±0.5°C
1°C ±0.2% reading ±1°C
0°C to +50°C
Battery type
Battery life
Weight
Environmental
9V PP3
1000 hrs
250g
IP64
223045
Price Each
List No.
Order Code
3208I.S
K0234I/S
K0454D
717-4123
500-4342
717-4135
1+
Thermocouple Calibrator, DP6
± [0.20% +0.3°C (0.5°F)]
± [0.50% +0.3°C (0.5°F)]400g
Mftrs. List No.
Order Code
C9006IS
SK21M
PK24M
AK28M
Meter
General Probe
Surface probe
± [0.05% +0.3°C (0.5°F)]
± [0.05% +0.4°C (0.7°F)]
Calibration
List No.
Thermometer
Surface probe
Penetration probe
Air probe
Description
-210°C to 1200°C (-346°F to 2192°F)
-200°C to 1372°C (-328°F to 2501°F)
-250°C to 400°C (-418°F to 752°F)
-150°C to 1000°C (-238°F to 1832°F)
-200°C to 1300°C (-328°F to 2372°F)
0°C to 1767°C (32°F to 3212°F)
400g
Description
Mftrs.
Thermocouple types
K, J, T, E, N, R, S
Min./Max./Avg recording
Yes
Number of inputs
53-II (Single), 54-II (Dual)Compatible with optional toolpackYes
Time stamp
Time of day
Differential (T1-T2) readout
54-II only
Splash/dust resistant
Yes
Data logging up to 500 points
Yes
Dual display with backlightYes
IR data port for interface to PC Yes
Temperature Range
J-type Thermocouples
K-type Thermocouples
T-type Thermocouples
E-type Thermocouples
N-type Thermocouples
R and S-type Thermocouples
Temperature Accuracy
Above - 100°C (-148°F):
J, K, T, E and N-type
R and S-type
Below - 100°C (-148°F):
J, K, E and N-types
T-type
Price Each
S
S
N
N
Intrinsically Safe Thermometer
C9006IS
Ì Electronic thermometer with type K, N, T, J, R and S
thermocouple compatibility
Ì For use in hazardous areas such as refineries, petrochemical plants and gas distribution
Ì Certified to II 1 G EEx ia IIC T4 Baseefa 03 ATEX 0056
Ì Dust and waterproof to IP67 (BS EN 60529, IEC529) standards
Ì Max, min temperature memory and hold functions
Ì Displays temperature in °C, °F and K
Ì Selectable auto switch off
Ì Sub-miniature connector
The portable thermocouple calibrator is a
compact and easy to use instrument that is
equally at home in the laboratory or service
environment. The DP6 will both measure
and simulate the outputs from the 10 most
popular thermocouple types, and may be
scaled in °C, °F, °K or mV. Automatic reference junction compensation is provided
with the option for manual value entry. For
full portability the calibrator is powered by a
rechargeable battery giving more than 15
hours continuous use. The DP6 is delivered
in an ABS transport case which also houses the charger and a copper transition adapter
for easy connection to miniature thermocouple plugs.
Key Feature:
Ì Reference junction compensation
Ì Linearised for 10 thermocouple types
Ì Rechargeable battery
Ì Measures and sources
Ì Memory with 130 Stores
Ì Calibrated to ITS90 and IPTS68
Ì Digital calibration
Ì Displays in °C, °F, °K and mV
Ì 1 micro volt Resolution
Display:
4.5 digit high contrast LCD 10.2mm. Display range 19999 digits, automatic decimal point, polarity
and units. Two line alphanumeric LCD for programming and display of configuration
Ranges:
The reference junction reference value may also be set via the keyboard over the range 0°C to +100°C
Terminals:
2 4mm low thermal E.M.F . copper terminals
Storage Temperature:
-20°C to +50°C
Dimensions:
150mm x 130mm x 60mm (W H D) approx
Range
10mV
100mV
1V
DP6 Specifications
Max Display
Uncertainty
±15.000mV
±0.02% of reading
±0.015% FS
±150.00mV
±0.01% of reading
±0.015% FS
±1.5000V
±0.01% of reading
±0.015% FS
Resolution
1μV
10μV
100μV
538633
Mftrs.
Price Each
List No.
Order Code
930437
171-8668
1+
farnell.com
Thermometers - Non Contact (IR)
Pocket Infrared Thermometer
Ì Easy to use: hold within 2 feet of the area being
measured and push the button
Ì User selectable °C/°F
Ì Response time less than 1 second
Ì Large 12mm LCD display for readings and functions
Ì Automatic data hold
Ì Set min/max and lock
Ì Auto power off and low battery indication
Ì Impact-resistant ABS case
Ì Supplied with carry case, wrist strap & lithium battery
General Specifications
Operating Temperature
Battery Type
Battery Life
Dimensions (Incl. Protective Cap)
488395.503096
Mftrs. List No.
Infrared Thermometer
The Fluke 61 thermometer provides a quick non-contact temperature
measurement in a compact case surrounded with a protective holster.
Targeting objects is easy with the bright laser beam activated via the
simple push button operation. Even in the dark the display is simple to
read with the quality backlit screen. Ideal for measuring surface temperatures of rotating, hard-to-reach, electrically live or dangerously hot targets.
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
480460.465857
Pocket Infrared Thermometer
A pocket size infrared thermometer that can check all
typed of heating ventilation and air-conditioning (HVAC)
systems. Monitor performance of appliances such as
refrigerators, dishwashers, freezers and ovens to ensure proper cooking, grilling and storage temperatures.
6:1 distance to spot size ratio
Easy to use
Large LCD display
Backlit display
User selectable °C or °F
Automatic data hold
Auto power off
Low battery indication
Shock-absorbing holster increases ruggedness
Bright laser beam provides easy targeting
Large display clearly supplies data at a glance
Quality backlight illuminates the screen in the dark
Automatic sleep mode after 15 seconds extends battery life
Alkaline batteries provide over 4000 typical measurements
Battery life: 12 hours with laser and backlight activated
Dimensions (LxWxH): 184x45x38mm
Weight: 227g
Ranges
Response Time
Resolution
Repeatability
Accuracy
(Assumes ambient
operating temperature of 23°C)
Optical resolution
Emissivity
Minimum spot size
-18°C to 275°C (O°F to 527°F)
< 1 second
0.2°
± 2° of reading or ± 2%, whichever is greater
Foar Targets at:
-18°C to -1°C (0°F to 30°F): ± 3° (± 5°F)
-1°C to 275°C (30 to 527°F):
± 2% of reading or ± 2°C (± 3.5°F),
whichever is greater
8:1 Distance to spot size ratio
Fixed at 0.95
Minimum 200mm (spot 25mm)
333733
Price Each
Mftrs. List No.
Order Code
FLUKE 61
Infrared Food Thermometers
FoodPro Series
FoodPro - Quick surface scanning
The perfect companion to contact thermometers
Ì Fast non-contact temperature measurement without danger of contamination
Ì Signals potentially risky temperatures
with lighted LEDs
Ì Measurement spot illumination
FoodPro Plus - Complete food inspection
The all-in-one temperature monitoring tool
Features same as FoodPro with added:
Ì Integrated contact probe for confirmation
of vital core temperatures
Ì Timer with alarm function
H=94, W=56, D=28mm
Weight = 76g
Range
Basic accuracy
Resolution
Response time
-30 to + 270°C (-22 to +518°F) Optical resolution 6:1 distance to spot size ratio
±2% of reading
Emissivity
0.95 fixed
1°F/°C
Power
2x 1.5V AAA batteries (supplied)
< 1 second
381015.345256
Price Each
Order Code
1+
838-8580
Pocket Thermometer
810
FoodPro
Ì Surface temperature IR measurement with
1-point laser spot marking and 6:1 optics
Ì Air temperature measurement
Ì Display of differential temperature (e.g. between window and air)
Ì Hold function and max./min. values
Ì Backlit display
Ì Auto-off
Supplied with Calibration protocol, wrist strap,
belt holder, protective cap & batteries
Infra red thermometer
Temperature range
Accuracy
Response time
Spectral response
Emissivity
Distance to spot size
Working range
Minimum target size
Illumination to IR channel offset
Probe Thermometer
Temperature Range
Accuracy
Response time
Probe dimensions
Sensor type
Surface Temperature
Measuring Range
Resolution
Accuracy
Optics
Air Temperature
Measuring Range
Resolution
Accuracy
Units
1+
51
397-0061
FoodPro Plus
-30°C to +200°C
-35°C to +275°C
0 to +65°C: ±1°C
<0°C: ±1°C ±0.1 degree/degree
> 65°C: ±1.5% of reading
<500ms after initial reading
8 - 14μm
Pre-set for food applications
2.5:1 @ 90% energy
25 to 250mm
12mm
13mm
-
-40 to 200°C
-5 to +65: ±0.5°C
<-5°C: ±1°C
> 65°C: ±1% of reading
7 - 8 seconds (3 time constants)
ø: 3mm, Length: 80mm
Thin film platinum, class A RTD
Test Equipment – Environmental, HVAC & Pressure
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
1+
147-1398
FLUKE 61
Price Each
1+
Order Code
810
This pocket size and easy-to-use infrared thermometer is ideal for precise non-contact
measurement of surface temperatures. Suitable for monitoring appliances, heating, ventilation & air conditioning systems, food preparation and storage temperatures.
142-6144
-10 to 50°C
Alkaline (2 x AAA)
50 hrs (average, without display illumination)
119 x 46 x 25mm
Price Each
-35°C to +230°C
0.1°C
± (2%rdg + 2°C)
0.95, fixed
3V
40 x 75 x 20mm
33g
Order Code
3409
Power, Test and Measurement
Measuring Range
Resolution
Accuracy
Emissivity
Battery
Dimensions (WxHxD)
Weight
element14.com
339609.409820
-30°C to 300°C
0.1°C
± 2.0°C (-30 to +100°C, ± 2% of m.v. remaining range)
6:1
Mftrs.
Price Each
List No.
Order Code
FP
FP PLUS
127-2819
127-2820
1+
-10 to 50°C
0.1°C
± 0.5°C
°C/°F
3409
3410
farnell.com
Price Each
Thermometers - Non Contact (IR) continued
Model
Model: 72-820
A general purpose infrared, non-contact thermometer with
adjustable emissivity. Simply target the unit using the builtin laser pointer and squeeze the trigger to take fast and accurate surface temperature measurements.
Power, Test and Measurement
Ì
Ì
Ì
Ì
4 Digit LCD with backlight
°C/°F measurements
12:1 distance to spot ratio
Max/Min/Dif/Avg temperature display
with hold function
Ì
Ì
Ì
Ì
1+
142-6145
142-6146
Infrared Thermometer
IR608A
The IR 608A non-contact thermometer is the ideal tool for
customers who want to measure temperature in a variety of
applications. The unit has the following additional features:
Ì "Pistol grip design" for comfortable grip
Ì Measuring range -18°C to 275°C
Ì Laser sighting for accurate targeting
Ì Display hold (7 seconds)
Ì Distance to spot size ratio 8:1
Ì Accuracy to 2%
Ì Backlit display
Ì One year "no hassle" warranty
-18°C to +550°C
±1.8%
0.1°C
±0.5%
0.10 to 1.00
250ms
29x32mm
53x169x138mm
270g
Sleep mode and low battery warning
USB or 9V battery power
Tripod mount
Supplied with 9V battery, carry bag, USB
lead and user manual
510028.509462
Price Each
Description
Infrared Thermometer
Order Code
W=60 H=230 D=165mm. Weight 500g
1+
489625.502382
156-3715
Price Each
Description
Infrared Non Contact Thermometer
Order Code
Infrared Thermometer
Model: 72-823
A general purpose infrared, non-contact thermometer with a
wide temperature measurement range. Simply target the
unit using the built-in laser pointer and squeeze the trigger
to take fast and accurate surface temperature measurements.
1+
146-6481
Price Each
Standard Calibration Charge
UKAS Calibration ChargeNATA Calibration Charge
S
N
Infrared Thermometer
830-T1/-T2
Range
Accuracy
Resolution
Repeatability
Emissivity
Responce Time
LCD size (WxH)
Dimensions (WxHxD)
Weight
51
Test Equipment – Environmental, HVAC & Pressure
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
-32°C to +650°C
±1.8%
0.1°C
±0.5%
0.10 to 1.00
250ms
29x32mm
53x169x138mm
270g
4 Digit LCD with backlight
°C/°F measurements
20:1 distance to spot ratio
Max/Min/Dif/Avg temperature display with hold function
Sleep mode and low battery warning
USB or 9V battery power
Tripod mount
Supplied with 9V battery, carry bag, USB lead and user manual
510029.509474
Infrared Thermometer
Order Code
H=190, W=75, D=38mm Weight=200g
830-T1 features
Ì Fast logging
Ì Laser sighting
Ì Adjustable alarm limits
Ì Audible and visual alarm if limits
are exceeded
Ì Easy handling via pistol design
Ì Backlit display
Ì Adjustable emissitivity factor (0.2
to 1.0)
830-T2 Extra features
Ì Exact 2-point siting
Ì Accurate 12:1 lens
Ì External temperature probes can
be connected
Ì Emissivity level can be determined
An infrared thermometer with choice of 1 or 2-point laser sighting. Has adjustable limit values and alarm function, the 830-T2 also has connection for external probes.
Price Each
Description
1+
Measuring Range
Resolution
Accuracy
Application temp
Storage temp
Battery
Life
Lens
Contact temp measurement (type K)
Resolution
Accuracy
156-3716
Dual Laser Infrared Thermometers
-30°C to +400°C
0.5°C
±1.5°C (0.1 to +400°C) ±2°C (-30 to 0°C)
-20°C to +50°C
-40°C to +70°C
PP3
15 hours
830-T1: 10:1 830-T2: 12:1`
-50 to +500°C
0.1°C
±0.5°C
377676
Mftrs.
Ì Dual laser pointers converge to a single
spot when the unit is at the optimal distance from the object being measured
Ì Measures °C and °F
Ì Distance to spot size ratio is 8:1 at the
focal point
Ì Impact-resistant double moulded ABS
case
Ì Response time less than 150 milliseconds
Ì Large backlit LCD display with function
indicators
Ì Automatic data hold when trigger released
Model
Measuring Range
Resolution
Accuracy
Emissivity
Battery
Dimensions (WxHxD)
Weight
Price Each
List No.
Order Code
830-T1
830-T2
836-8996
836-9003
1+
INTELLIGENT ONLINE BUYING
SYSTEM PROVIDING
Ì Auto power off
Ì Over range indication
Ì Supplied with carry case and battery
IR-8861
-50°C to +450°C
0.1°C
± 1%
0.95, fixed
PP3
43 x 146 x 104mm
163g
IR-8862
-50°C to +650°C
0.1°C
± 1%
0.1 to 1.0, variable
480461.466695
3410
Order Code
IR-8861
IR-8862
Infrared Non Contact Thermometer
Range
Accuracy
Resolution
Repeatability
Emissivity
Responce Time
LCD size (WxH)
Dimensions (WxHxD)
Weight
element14.com
Complete cost control, reduced
administration time, visibility of your
spend, flexibility and personalised to
your company’s needs.
farnell.com/ibuy
farnell.com
Infrared Thermometer
Model 62
Ì Laser guided sighting system for easy targeting with 1%
accuracy
Ì Display in °C or °F
Ì Backlit display for easy reading in the dark
Ì MAX temp reading
Pistol grip
-30°C to +500°C
10:1
Response time
Resolution
Repeatability
Accuracy
<10°C:
10 to 30°C:
30 to 500°C:
Distance to target
Emissivity
≤0.5 seconds
0.2°C
2%
Response time
Resolution
Repeatability
Accuracy
< 26°C:
-26 to -18°C:
-18 to 23°C:
23 to 510°C:
> 510°C:
Distance to target
Emissivity
± 1.5°C
±1°C ±1.5% of reading
± 1.5°C
1.5m
Fixed at 0.95
W=101 H=152 D=38mm.
Weight 200g
63
Pistol grip
-32 to 535°C
12:1
Ì
Ì
Ì
MAX only
66
Pistol grip
-32 to 600°C
30:1
Ì
Ì
Ì
Ì
Ì
Ì
Ì
68
Pistol grip
-32 to 760°C
50:1
Ì
Ì
Ì
Ì
Ì
Ì
Ì
63
≤0.5 secs
0.2°C
66
≤0.5 secs
0.1°C
±0.5% or ≤ ±1°C
68
≤0.5 secs
0.1°C
±1.5% of reading
Up to 2m
Fixed at 0.95
±3°C
±2.5°C
±2°C
±1% of reading or ±1°C
±1% of reading or ±1°C
5m
8m
0.1 to 1.0 by 0.01 steps
624194
Mftrs.
624421
Mftrs
Description
List No.
IR Thermometer
Holster
C101 Hard Case
62
H6
C101
Price Each
Order Code
1+
947-9813
828-3931
947-9783
Description
List No.
63 IR Thermometer 535°C
Holster
Hard Case
63
H6
C101
Price Each
Order
Standard Calibration Charge
UKAS Calibration Charge
Infrared Thermometers
1+
+
921-0083
828-3931
947-9783
Price Each
S
N
Fluke 62 Max
Infrared & Contact Thermometer
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Temperature range
Accuracy
Response time (95%)
Optical resolution
Display resolution
Power
Battery life
Dimensions
Weight
Operating temperature
IP rating
62 Max
-30°C to 500°C
±1.5°C or ±1.5% of reading
<500ms
10:1
62 Max+
30°C to 650°C
±1.0°C or ±1.0% of reading
<300ms
12:1
0.1°C
AA battery
10 hours
8 hours
175x85x75mm
255g
0°C to 50°C
IP54
659726
Price Each
Mftrs. List No.
Type
FLUKE-62 MAX
FLUKE-62 MAX +
Single Laser
Dual Laser
Order Code
1+
211-8264
211-8265
Infrared Thermometers
60 Series
W=160 H=200 D=55mm. Weight 320g
Ì
Ì
Ì
Ì
Ì
Ì
The Fluke 60 Series non-contact thermometers are the ideal professional diagnostic tools for quick and accurate
temperature measurements. Ideal for
measuring surface temperatures of rotating, hard-to-reach, electricity live or
dangerously hot targets like electrical
motors and - panels, and heating and
ventilation systems. Laser sighting system guides measurements to the right
target and in less than a second, the
large temperature display provides a
readout of the surface temperature.
Laser guided sighting system for easy targeting with 1% accuracy
Up to 12 points datalogging with min, max and average functions
Up to 50:1 optical resolution
Choice between models with fixed or adjustable emissivity
Backlit display for easy reading in the dark
Temperatures up to 760°C
561 HVACPro
Ì IR thermometer for quick measurements up
close or at a distance, without a ladder
Ì Compatible with all standard mini-connector Ktype thermocouples
Ì Velcro pipe probe for superheat, sub-cooling or
other contact and ambient measurements
Ì Single-point laser sighting
Ì Temperature range optimized for HVAC/R applications
Ì Easy emissivity adjustment for measuring pipes
and ducts more accurately
Ì Lightweight, portable and very easy to use
Ì Efficient - no need to shut down equipment
when making IR measurements
Ì MIN, MAX and DIF temperature readings help
you quickly identify problems
Ì Scan large areas or small objects quickly and efficiently
Ì HVAC/R measurement guide included to maxiW=52 H=177 D=164mm. Weight 340g
mize your productivity
Ì Backlit LCD display with dual temperature measurements
Ì MAX, MINand DIF functions
Ì 7 second Data Hold
Ì Two year warranty
Supplied with: K-type velcro pipe probe, hard carry case, 2x AA batteries, user manual
and measurement guide.
Temperature range
Optical resolution
Emissivity
Response time
Accuracy
0°C to 550°C
<0°C
Resolution
Repeatability
Velcro Pipe Probe (Range 0 -100°C)
Physical
Power
-40°C to +550°C
12:1
Three settings: 0.3 / 0.7 / 0.95
≤500 ms
±1% of reading or ± 1°C whichever is greater
±(1% of reading + 1°C)
0.1°C
0.5%
±2.2°C
2 x AA batteries, giving 12 hours operation
440686.502109
Mftrs
Description
List No.
Thermometer
Holster
561
H6
Price Each
Order Code
1+
+
121-8793
828-3931
Price Each
Standard Calibration Charge
UKAS Calibration Charge
51
Test Equipment – Environmental, HVAC & Pressure
Ì
Dust and water-resistant
3 meter drop tested
Display in °C or °F
Ergonomically designed
Will clip to your tool belt or belt loop or easily fits into
your tool box
Precise laser technology makes for more accurate
and repeatable measurements
Fluke 62 Max+ has dual rotating lasers to help you
identify an area to be measured
Large and backlit display
Displays the minimum, maximum or average temperature, or the difference between two measurements
Hi and Lo alarms for rapid display of measurements
outside the limits
3411
Power, Test and Measurement
Form factor
Temperature range
Optical resolution
Form factor
Temperature range
Optical resolution
Laser beam
Backlit LCD display
Selectable °C or °F
MIN/MAX/AVG/DIF
Datalogging
Hi/Lo Alarm
Adjustable emissivity
element14.com
S
N
FREE GLOBAL LEGISLATION SUPPORT
RoHS, REACH, WEEE, ErP, Batteries
Directive - latest updates, free white
papers and live online Q&A at
element14.com/legislation
3411
3412
farnell.com
Included Accessories
Fluke 574: Hard carry case, batteries, thermocouple K probe, 220V PSU, DataTemp software, RS232 cable
Thermometers - Non Contact (IR) continued
Infrared & Contact Thermometers
566 and 568
Power, Test and Measurement
51
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì Measure -40°C to 800°C /-40°F to 1472°F
(568) or -40°C to 650°C / -40°F to 1202°F
(566)
Ì Easily access advanced features with the
soft-key buttons and graphical display
Ì Measure smaller objects from further away,
with a distance-to-spot ratio of 50:1 (568)
or 30:1 (566)
Ì Compatibility with all standard miniconnector K-type thermocouples allows you to preserve your thermocouple investments
Ì Confidently measure a wide variety of surfaces with the adjustable emissivity feature,
including a built-in material table
Ì Capture up to 99 points (568) or 20 point
(566) of data, for downloading and recalling
later
Easily trend and analyze data with included FlukeView Forms software (568) Two-inone infrared and contact thermometers with an innovative dot matrix display.
See your data right away without leaving the site, using the USB (568) and your laptop
for "Hands-free" datalogging
Confidently troubleshoot equipment with 1% measurement accuracy
Versatile interface with six languages from which to choose
98 x 96 pixel dot matrix display with two level backlight
Hi / Low Alarms
Min / Max / Avg / Diff
Trigger Lock
Test Equipment – Environmental, HVAC & Pressure
566
568
Optical resolution
30:1
50:1
Emissivity
Adjustable from 0.1 to 1.00
Response time
≤500 ms
Infrared Measurement Specs
Temperature range
-40°C to +650°C
-40°C to +800°C
0°C to 550°C
±1% of reading or ± 1°C whichever is greater
<0°C
±(1% of reading + 1°C)
K-Type Thermocouple Measurement Specs
Temperature range
-270°C to 1372°C
-40°C to 1372°C
±1% or 1°C whichever is greater
-270°C to -40°C
±(1°C + 0.2°
K-Type Bead Thermocouple Measurement Specs
Temperature range
-40°C to 260°C
-40°C to 260°C
±1.1°C
Physical
Data Storage
20 points
99 points
Power
2 x AA batteries, giving 12 hours operation
List No.
Thermometer
Thermometer
566
568
Price Each
Order Code
1+
150-3751
150-3752
Price Each
Standard Calibration Charge
UKAS Calibration Charge
S
N
Infrared Thermometers
570 Series
Temperature range
Optical resolution
Three dot laser beam for accurate
targeting
Adjustable emissivity
Bar graph display
Backlit LCD display
Selectable °C or °F
Audible and visible Hi/Lo alarm
MIN / MAX readings
AVG / DIF readings
Datalogging (number of measurements)
PC interface
Built-in digital camera
574
-30 to 900°C
Standard 60:1 / Close Focus
50:1
Ì
Ì
Ì
Ì
Ì
Ì/Ì
Ì
Ì
100
Price Each
List No.
Order Code
With Close Focus
574CF
1+
947-9856
Price Each
Standard Calibration Charge
S
Thermal Imagers
Thermal Imaging Camera, Ti9
The Fluke Ti9 Electrical - Thermal Imager provides a full picture
of many problems in installing, repairing and verifying electrical
and mechanical equipment.
Included Accessories:
Ì SmartView™ analysis and reporting software
Ì 2 GB SD Memory Card
Ì SD Card Reader for downloading images into your computer
Ì Rugged hard carry case and portable soft carry case
Ì Hand strap
Ì Rechargeable internal battery
Ì AC charger/power supply
Ì Printed Users Manual
Imaging performance
Thermal: Field of View (FOV )
23° horizontal x 17° vertical
Minimum focus distance
Thermal lens: 15 cm
Thermal sensitivity (NETD)
<0.2 °C at 30 °C (200 mK)
Minimum span (Auto/Manual)
10 °C/5 °C
Focus
Manual
Detector size
160 x 120
Visual (Visible light) camera
640 x 480 pixels, full color
Temperature measurement
Temperature range
-20°C to +250 °C (-4 °F to +482 °F)
Accuracy
± 5 ° C or 5 % (whichever is greater)
Measurement modes
Center point
Image presentation
Digital display
9.1 cm (3.6 in) diagonal landscape color VGA (640 x 480) LCD
LCD backlight
Selectable bright or auto
Palettes
Ironbow, blue-red, high contrast, grey
Power
Battery type
Internal rechargeable battery (included)
Battery operating time
3 to 4 hours continuous operation
Environmental and mechanical design
Operating temperature
-10 °C t o +50 °C (+14 °F to +122 °F)
Storage temperature
-20 °C to +50 °C (-4 °F to +122 °F)
Relative humidity
Operating and storage 10 % to 90 %, non-condensing
Water and dust resistant
IP54
Two meter (6.6 feet) drop test
Yes
Protective lens cover
Yes
Weight (including battery)
1.2 kg (2.6 lbs)
Imager size (HxWxD)
267 mm x 127 mm x 152 mm (10.5 in x 5.0 in x 6.0 in)
533540
Mftrs.
List No.
FLUKE TI9
Price Each
Order Code
1+
170-0079
RS232
Ì Enhanced optics allows measurements of smaller objects from farther away
Ì True Dimension™ three-dot laser sighting system highlights the true diameter of measurement spots at all distances
Ì Adjustable emissivity setting and 30 pre-set common material values for more accurate
measurements
Ì 100 data point memory for storage of measurements
Ì Temperatures up to 900°C
Ì 2 Years Warranty
3412
624205
Mftrs.
Features and Benefits:
Ì Rugged and Reliable: Engineered to withstand a 2 metre (6.6 feet) drop
Ì Excellent thermal sensitivity for seeing even small temperature differences (which could
indicate problems)
Ì 640 x 480 large 3.6” diagonal color LCD display (landscape format)
Ì Temperature measurement ranges for most Industrial and Commercial applications
Ì SmartView™ analysis and reporting software (with free upgrades through life of product)
Ì Removable 2 GB SD Memory Card for easy storage and transfer of thermal and visible
images
Ì Complete solution includes hardware and software to get you going
Ì Two-year warranty
Ì
492395.503400
Description
574
250 ms (95% of reading)
0.1°C of reading up to 900°C
±0.5% of reading or ±1°C
±0.75% of reading, ±0.75°C *
10.5m
Digitally adjustable from 0.1 to 1.0 in 0.01 increments
Response time
Resolution
Repeatability
Accuracy
Typical distance to target
Emissivity
* whichever is greater
Includes: Infrared thermometer with contact thermometer capabilities, FlukeView Forms
software (568 only), USB cable (568 only), K-type thermocouple bead probe, hard carrying case, quick start guide, and users manual.
Mftrs
element14.com
TROUBLESHOOTING TIPS
Chat online to one of our
technical engineers at farnell.com
farnell.com
Thermal Imager
Ti100 Series
A Fluke thermal imager can save you
time and money by finding potential
problems before they become costly
failures. With the innovative features and functionality in the
Fluke Ti125, Ti110 and Ti100 imagers, you can perform infrared inspections faster and more efficiently and thoroughly
document problem areas for additional follow-up.
Ì Find problems faster and easier-IR-Fusion姞 with AutoBlend™ mode (Ti125 only)-Accurately identify potential issues by combining digital and IR images with AutoBlend. It
blends digital and partially transparent IR images into a single informationfilled image.
Ì Multi-mode video recording-focus-free video in visible light and infrared with full IR-Fusion. (Ti110 and Ti125 only).
Ì Easily communicate the location of problems with the Electronic Compass (8-Point
Cardinal).
Kit contents: Thermal imagers, AC power adapter, lithium ion smart battery (Ti125 includes 2), USB cable, 2GB SD memory card, hard carrying case, soft transport bag, adjustable hand strap, printed users manual, manuals on CD, SmartView姞 software and warranty registration card. (Ti125 model also include a two-bay charging base and a multi-format
USB memory card reader).
Ti25
Ti110
Ti100
Features and Benefits:
Ì Rugged and Reliable: Engineered to withstand a 2 metre (6.6 feet) drop for maximum
ruggedness
Ì Excellent thermal sensitivity for seeing even small temperature differences (which could
indicate problems)
Ì 640 x 480 large 3.6” diagonal color LCD display (landscape format)
Ì Temperature measurement ranges optimized for Building Inspection and Diagnostics
applications
Ì SmartView™ analysis and reporting software (with free upgrades through life of product)
Ì Removable 2 GB SD Memory Card for easy storage and transfer of thermal images
Ì Complete solution includes hardware and software to get you going
Ì Two-year warranty for peace-of-mind and dependability
Ì Upgradeable to a TiR with IR-Fusion® capabilities
Ì
Imaging performance
Thermal: Field of View (FOV )
23° horizontal x 17° vertical
Minimum focus distance
Thermal lens: 15 cm
Thermal sensitivity (NETD)
<0.1 °C at 30 °C (100 mK)
Minimum span (Auto/Manual)
5 °C / 2.5 °C
Focus
Manual, on-handed focus capability
Detector size
160 x 120
Visual (Visible light) camera
640 x 480 pixels, full color
Temperature measurement
Temperature range
-20°C to +100 °C (-4 °F to +212 °F)
Accuracy
± 5 ° C or 5 % (whichever is greater)
Measurement modes
Center point
Image presentation
Digital display
9.1 cm (3.6 in) diagonal landscape color VGA (640 x 480) LCD
LCD backlight
Selectable bright or auto
Palettes
Ironbow, blue-red, high contrast, grey scale
Power
Battery type
Internal rechargeable battery (included)
Battery operating time
3 to 4 hours continuous operation
Environmental and mechanical design
Operating temperature
-10 °C t o +50 °C (+14 °F to +122 °F)
Storage temperature
-20 °C to +50 °C (-4 °F to +122 °F)
Operating and storage 10 % to 90 %, non-condensing
Relative humidity
Water and dust resistant
IP54
Two meter (6.6 feet) drop test
Yes
Protective lens cover
Yes
Weight (including battery)
1.2 kg (2.6 lbs)
Imager size (HxWxD)
267 mm x 127 mm x 152 mm (10.5 in x 5.0 in x 6.0 in)
533548
Mftrs.
Price Each
List No.
Order Code
FLUKE TIRX
1+
170-0081
Fluke TiR Series Thermal Imagers
Fluke TiR Series Thermal Imagers are built specifically for the
building diagnostic industry.
Property managers and facility
managers use thermal imaging
to protect investments and keep
buildings in a well maintained,
healthy state.
653681
Mftrs.
List No.
Price Each
Order Code
FLK-TI100 9HZ
FLK-TI110 9HZ
FLK-TI125 9HZ
209-4466
209-4467
209-4468
Accessories
Sun Visor
Tripod Mounting
Rechargeable Battery
209-4469
209-4470
209-4471
1+
FLUKE-TIR
Price Each
Standard Calibration Charge
S
Thermal Imaging Camera, TiRx
The new Fluke TiRx Inspector Thermal
Imager offers a superior image quality,
unmatched ruggedness and unique easeof-use at a breakthrough price point for
the building inspector, HVAC technician, or energy assessor/
auditor.
Included Accessories:
Ì SmartView™ analysis and reporting software
Ì 2 GB SD Memory Card (for storing well over 1200 images
at a time)
Ì SD Card Reader for easily downloading images into your
computer
Ì Rugged hard carry case and portable soft carry case
Ì Hand strap for use with the right or left hand.
Ì Rechargeable internal battery
Ì AC charger/power supply
Ì Printed Users Manual (individually printed in 16 different languages)
Ì Interactive Training DVD to help get you started
FLUKE-TIR1
Typical thermal imaging building applications:
Thermal imaging is an efficient, non-destructive testing method to detect (potential) problem areas such as:
Ì Moisture intrusion in roof systems, walls, flooring, ceilings and other building areas
Ì Leaks in water pipes, buried steam lines, water lines or underground heating systems
and sprinkler systems
Ì Missing or inadequate insulation areas
Ì Heat or cooling loss, HVAC/R problem areas
Ì Connection problems in low voltage electrical systems
Ì Termite and pest issues
Ì Construction failure areas
Product Specifications:
Fluke TiR1
Fluke TiR
Minimum Focus distance
15cm
Thermal sensitivity (NETD)
≤ 0.07 °C at 30 °C (70 mK)
≤ 0.1 °C at 30 °C (100 mK)
Accuracy
± 2 °C or 2 % (whichever is greater) ± 5 °C or 5 % (whichever is greater)
Voice memo recorder
Yes
No
(voice annotation)
Operating temperature
-10 °C to +50 °C
Storage temperature
-20 °C to +50 °C
Relative humidity
Operating and storage 10 % to 90 %, non-condensing
Water and dust resistant
IP54
Two meter (6.5 feet) drop test
Yes
Protective lens cover
Yes
Weight (including battery)
1.2 kg
Imager size (HxWxD)
267 mm x 127 mm x 152 mm
51
Test Equipment – Environmental, HVAC & Pressure
Thermal imaging performance
IR resolution (FPA size)
160 x 120 FPA Uncooled Microbolometer
Spectral band
7.5μm to 14μm (long wave)
Capture or refresh rate
9Hz or 30Hz versions
9Hz
Detector type
Field of view (FOV)
22.5°H x 31°V
Spatial resolution (IFOV)
3.39mRad
Min focus distance
152.5mm
1.2m
Thermal sensitivity (NETD)
≥ 0.10°C at 30°C target temp (100 mK)
Minimum span (auto)
5°C
Minimum span (manual)
2.5°C
Visual imaging performance
Color Alarm
High temp., low temp., isotherm
High temp.
–
Temperature measurement
Temperature range
-20°C to 350°C
-20°C to 250°C
Accuracy
± 2°C or 2% (at 25°C nominal, whichever is greater)
Focus mechanism
IR-OptiFlex™ focus system
Focus-free 1.2 m
Image presentation
LCD display
3.5 inch diagonal (portrait format)
Visible camera
2 megapixel
–
Power
Battery
Two
One
Battery operating time
4+ Hours (each)
General
Weight
726g
Dimensions (HxWxD)
284 x 86 x 135mm
3413
Power, Test and Measurement
Ì Exclusive IR-OptiFlex™ focus system-ensures that images are in good focus from 1.2 metres (4 feet) and beyond for optimum image clarity and scanning convenience. For shorter distances change to manual mode
with the touch of a finger (Ti110 and Ti125).
Ì Always have references handy-IR-PhotoNotes™ annotation system-Quickly identify and keep track of inspection
locations by adding digital images of important information and surrounding areas (Ti110 and Ti125).
element14.com
3413
3414
farnell.com
Thermal Imagers - continued
Industrial Thermal Imagers
Ti27 & Ti29
Fluke TiR Series Thermal Imagers
- continued
549352
Mftrs.
Price Each
List No.
Order Code
FLUKE-TIR
FLUKE-TIR1
1+
177-2097
177-2098
Thermal Imager
Ti10 & Ti25
The Ultimate Tools for Troubleshooting and Maintenance!
Power, Test and Measurement
51
Ì
Ì
Ì
Test Equipment – Environmental, HVAC & Pressure
The Fluke Ti25 and Ti10 are the perfect tools to add to your problem solving arsenal. Built for tough work environments, these highperformance, fully radiometric images are ideal for troubleshooting
electrical installations, electro-mechanical equipment, process instrumentation, HVAC equipment and others.
New IR-Fusion™ Technology, combines both visual and infrared
images at the same time, making the images easier to understand.
Ì
Ì
Ì Engineered and tested to withstand a 2 metre drop, when was the last time you dropped a tool?
Ì Withstands dust and water-tested to an IP54 rating
Ì Innovative protective lens cover protects the lens when not in use. The cover is securely attached and out of the way while images are being taken.
Ì Works in ambient temperatures as low as -10 °C and high as +50 °C
Ì Delivers the clear, crisp images needed to find problems fast
Ì Identify even small temperature differences that could indicate problems with excellent
thermal sensitivity (NETD)
Ì High performance, low noise sensor provides high quality image and stable temperature reading
Ì Even the smallest details become visible with the large, widescreen full VGA color LCD
display
Ì Intuitive, three-button menu is easy to use... simply navigate with the push of a thumb.
Ì No need to carry pen and paper, record findings by speaking into the camera. Voice
annotations can be recorded with every image you take. Voice comments are saved
along with individual images for future reference (Ti25 only)
Ì Store more than 3,000 screen images
Ì (.bmp format) for easy reporting direct into Microsoft Word™ and other programs or
1,200 IR-Fusion images, including thermal image, visual image, temperature data and
voice recorded comments for reporting and analysis purpose. Data is stored on included 2 GB SD memory card.
Ì
Ì
Ì
Ì
Fluke SmartView™ software is included with each Fluke thermal imager.
Ì Powerful, modular suite of software tools for viewing, annotating, editing and analyzing
of infrared images.
Ì Generate customizable, professional-looking reports in a few easy steps.
Ì Full support of IR-Fusion Technology lets you edit images in five viewing modes.
Compatability:
Windows® 2000 SP4 with update rollup 1/XP SP2/Vista
Ti25
Infra Red Performance
Thermal sensitivity @ 30°C
Minimum span (Auto/Manual)
Picture in Picture Modes
Measurement range
Accuracy
Markers
Voice memo recorder
Protection
Field of view
Spatial resolution
Minimum focus distance
Ti10
≤ 0.1°C (100mK)
≤ 0.2°C (200mK)
5 °C / 2.5 °C
10 °C / 5 °C
Blending-Min, Mid, & Max
Standard
-20 °C to 350 °C, 2 ranges
-20 °C to 250 °C
± 2 °C or 2% (whichever is greater) ± 5°C or 5% (whichever is greater)
Centre, Hot & Cold
Centre
✓
—
IP54
IP54
23° Horizontal x 17° Vertical
2.5 mrad
15cm
501657
Mftrs.
Ì
The greatest technological advancement in thermography may be how
Fluke has made it so simple to capture
images and analyze data right out of
the box. With just a push of your thumb, go from one handed manual smart focus to adding picture-in-picture and
even add comments in your own voice. The Fluke Ti27 and
Ti29 offers the only on-camera blended infrared with patented Fluke IR-Fusion® technology precisely aligning visible and IR images to better diagnose issues.
Ì Delivers the clear, crisp images needed to find problems
fast
Ì Identify even the smallest temperature differences that
could indicate problems with industry-leading thermal
sensitivity (NETD).
Automatic alignment (parallax correction) of visual and infrared images with Fluke patented IR-Fusion姞
Optional telephoto and wide angle lenses available for added versatility and special applications. (easily installable in the field)
Field replaceable batteries give you maximum flexibility no matter where your work
takes you
Intuitive, three-button menu is easy to use - simply navigate with the push of a thumb
No need to carry pen and paper - record findings by speaking into the imager. Voice
annotations can be recorded with every image you take. Voice comments are saved
along with individual images for future reference
One-handed focus capability, emissivity correction, reflected background temperature
compensation, and transmission correction increase the accuracy of measurements in
most situations
Adjustable hand strap for left-or right-handed use
Optimized for field use in challenging work environments
Engineered and tested to withstand a 2 m drop
Withstands dust and water - tested to an IP54 rating
Ti29
Ti27
Temperature
Temperature measurement range
-20°C to +600°C (-4°F to +1112°F)
(not calibrated below -10°C)
Temperature measurement accuracy
±2°C or 2% (at 25°C nominal, whichever is greater)
On-screen emissivity correction
Yes
On-screen reflected background temYes
perature compensation
On-screen transmission correction
Yes
Imaging performance
Image capture frequency
9 Hz refresh rate
Resolution
280 x 210 pixels
240 x 180 pixels
Total pixels
58800
43200
Standard infrared lens type
Field of view
23° x 17°
Spatial resolution (IFOV)
1.43 mRad
1.67 mRad
Minimum focus distance
150mm
Optional telephoto infrared lens type
Field of view
11.5° x 8.7°
Spatial resolution (IFOV)
0.72 mRad
0.84 mRad
Minimum focus distance
450mm
Optional wide-angle infrared lens type
Field of view
46° x 34°
Spatial resolution (IFOV)
2.86 mRad
3.34 mRad
Minimum focus distance
75mm
Focus mechanism
Manual, one-handed Smart Focus capability
General specifications
Display
91mm diagonal landscape color VGA (640 x 480) LCD with backlight and clear protective cover
Software
SmartView姞 full analysis and reporting software included
Safety standards
CSA (US and CAN): C22.2 No. 61010-1-04, UL: UL STD 61010-1
(2nd Edition), ISA: 82.02.01
Size (H x W x L)
277 x 122 x 170mm
Weight (battery included)
1.05kg
Supported Languages
Czech, English, Finnish, French, German, Italian, Japanese, Korean,
Polish, Portuguese, Russian, Simplified Chinese, Spanish, Swedish,
Traditional Chinese, and Turkish
Kit Contents: Thermal imager with standard infrared lens, AC power supply and universal
battery pack charger, 2 lithium ion battery packs, SD memory card, multi-format USB
memory card reader, SmartView姞 software, hard carrying case, soft transport bag, adjustable hand strap, printed users manual and warranty registration card.
635760
Price Each
List No.
Order Code
TI25
TI10
1+
155-3576
155-3577
Accessories
TI-CAR CHARGER
Standard Calibration Charge
UKAS Calibration Charge
155-3578
S
N
IMPROVED BACK ORDER DELIVERY
Receive email updates with the exact status, due
date and despatch information of all your back
order items farnell.com
3414
element14.com
Price Each
Description
Order Code
Ti29 Thermal Imager
Ti27 Thermal Imager
190-3547
190-3549
Accessories
Telephoto Infrared Lens
Wide-angle Infrared Lens
190-3551
190-3552
1+
farnell.com
element14.com
Process Timers
Industrial Thermal Imager
Ti32
Bench Process Timer
Designed for industrial and commercial
environments, the Fluke P3 Series of
thermal imagers deliver superior image
quality, versatility, and affordability
without compromise. They also boast superior infrared resolution, industry leading spatial resolution, and a high defi nition display creating the sharpest images in their price classes. Finding a potential problem before it becomes a costly
disaster shows you just how much a Fluke thermal imager
can save you in time, money and even lifes.
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Ì Delivers the clear, crisp images needed to find problems
fast with up to 320 x 240 sensor
Ì Identify even the smallest temperature differences that
could indicate problems with industry-leading thermal
sensitivity (NETD), down to 45 mK
Ì Automatic alignment (parallax correction) of visual and
infrared images with Fluke patented IR-Fusion姞
Field replaceable batteries give you maximum fl exibility no matter where your work
takes you.
Intuitive, three-button menu is easy to use - simply navigate with the push of a thumb
No need to carry pen and paper, record findings by speaking into the imager
Voice annotations can be recorded with every image you take. Voice comments are
saved along with individual images for future reference.
One-handed focus capability, emissivity correction, reflected background temperature
compensation, and transmission correction increase the accuracy of
measurements in most situations.
Adjustable hand strap for left-or right-handed use
Optimized for field use in challenging work environments
Engineered and tested to withstand a 2 m drop for the ultimate peace of mind
Withstands dust and water, tested to an IP54 rating
With their rugged design, integrated lens cover, protected display and 2 meter drop
test, they are designed to handle the harshest environments.
Kit contents: Thermal imager, smartView姞 software, 2 GB SD card, SD card reader, rugged hard carrying case, soft carrying case, hand strap, rechargeable battery, AC charger/
power supply and user manual.
Easy to use as a standard timer or automatically triggered by external devices for
start/stop via 4mm jack sockets. A high
accuracy timer, with a robust construction
ideal for regular use. Colour coded buttons
and jack sockets make the timer extremely
practical and convenient to use.
Ì Robust construction - impact-resistant
ABS case with non-slip rubber feet for
stability on the bench
Ì 30ppm quartz crystal with a fixed calibrated capacitor of 27pF for high accuracy timing
Ì 15mm LCD display
Ì 4mm jack sockets for Start/Stop & Reset allow automatic triggering of timer
by external devices
Ì Pressing the reset button during a timing cycle displays the time elapsed
Ì Supplied with battery
Capacity
Resolution
Accuracy
Power
Dimensions (WxHxD)
Weight
99mins, 59s, 99/100ths with auto roll-over
0.01s
± 1 Sec. in 24 hours
1x 1.5V AAA battery
105x80x100mm
151g
480551.466709
Price Each
Order Code
Temperature Probes & Accessories
Fine Wire Probes
KA Series
K type fine wire thermocouple sensors in
a choice of temperature ranges.
Ì PTFE fine wire sensors for KA01 and
Fibre Glass for KA02
Ì Class 1 material
Ì Moulded thermocouple miniature connector
Ti32
Visual imaging performance
Minimum focus distance
On camera operating modes
Color Alarm
Visible light camera
Temperature measurement
Temperature range
Accuracy
Measurement modes
Image presentation
Digital display
LCD backlight
Power
Battery type
Battery operating time
General
Weight
Dimensions (HxWxD)
320 x 240 Focal Plane Array, uncooled microbolometer
23° horizontal x 17° vertical
1.67 mRad
150mm
≤0.5°C at 30°C (50 mK)
2.5°C / 5°C
Manual
292mm x 220mm
450mm
1170mm x 86omm
75mm
339597.409722
Mftrs.
460mm
Picture-in-Picture and full screen IR plus Blending
High temperature alarm
2.0 MegaPixel
List No.
Range
KA01
KA02
-100 to + 250°C
-100 to + 650°C
1.05 kg
277 x 122 x 170mm
642373
FLUKE TI32
205-8941
Accessories
Telephoto Infrared Lens
Wide-angle Infrared Lens
190-3551
190-3552
1+
1+
492-0971
492-0983
K type surface probes for for general
purpose measurement, with a choice of
shaft sizes.
Ì Temperature range: -50 to
+1100°C
Ì The material can be bent without affecting performance
Ì Excellent for measurement of air,
gas, liquid and applications requiring
Two replaceable rechargeable battery packs (Lithium ion)
4+ hours per battery pack
Order Code
Order Code
KM Series
91mm landscape color VGA (640x480) LCD
Selectable bright or auto
Price Each
Price Each
General Purpose Probes
-20°C to 600°C
±2°C or 2%
Center point and hot and cold markers
Mftrs.
List No.
Temperature
difficult access
Ì Supplied with 2m curly cable with miniature plug
339595.409681
Mftrs.
Shaft
Price Each
List No.
Size (mm)
Order Code
KM01
KM03
KM04
100 x 1.5
100 x 3.0
300 x 3.0
492-0909
492-0880
492-0892
1+
51
Test Equipment – Environmental, HVAC & Pressure
Thermal imaging performance
Detector type
Field of view (FOV)
Spatial resolution (IFOV)
Min focus distance
Thermal sensitivity (NETD)
Minimum span (auto/manual)
Focus
Optional telephot infrared lens type
Field of view (FOV)
Minimum focus distance
Optional wide-angle infrared lens type
Field of view (FOV)
Minimum focus distance
1+
142-6154
Power, Test and Measurement
Ì
3415
3415
3416
farnell.com
Temperature Probes & Accessories continued
element14.com
Pipe Clamp Probe
KPS10
Ì K type probe with temperature range: -50
to +150°C
Ì Ideal for measurement of pipe temperatures, flow and return and radiator balancing
Ì Supplied with 2m of curly cable plus miniature plug
Surface Probes
KS Series
A range of K type surface probes for measuring within different temperature ranges.
Ì Excellent accuracy
Ì Fast response
Ì Fitted with 2m curly cable and miniature
plug
339598.409740
Mftrs.
339593.409615
Power, Test and Measurement
Mftrs.
Measuring
List No.
Range
KS08
KS07
KS01
-50 to +950°C
-50 to +600°C
-50 to +250°C
List No.
Order Code
KPS10
492-0995
1+
Price Each
Order Code
1+
Velcro Temperature Probe
492-0831
492-0843
492-0855
Model: 80PK-11
Ì Designed for hands free measurement
Ì Use several and leave in place for routine maintenance
Ì Use with any temperature-measuring instrument designed to accept Type-K
thermocouples
Ì Measurement Range: 30°C to 105°C
Ì Display Accuracy: ±0.1°C
Ì Measurement Time: 2 seconds
Ì Max. Voltage: 24V ac rms or 60V dc
Ì Cable: 0.5m, with 0.5m Velcro cuff
Needle Probes
KP Series
K type surface probes for for general purpose
(KP05), or heavy duty (KP07) measurement.
Ì Temperature range: -100 to 600°C
Ì With pencil point tip for ease of penetration
Ì Ideal for measurement of semi-solid or
solid materials
Ì Waterproof
460650.460648
Mftrs.
339594.409670
Mftrs.
Shaft
List No.
Diameter
KP05
51
Price Each
3.3mm
Price Each
Order Code
Price Each
Description
List No.
Order Code
Digital Multimeter
80PK-11
132-7567
1+
+
Price Each
1+
S
Standard Calibration Charge
UKAS Calibration Charge
NATA Calibration Charge
492-0867
N
Temperature Probes
Environmental Dataloggers
Test Equipment – Environmental, HVAC & Pressure
Low-cost USB Temperature Data Logger
EL-USB-LITE
A range of thermocouple probes designed for use with Fluke test meters for contact temperature measurements. SureGrip™ accessories are designed to improve steadiness in
slippery hands. Rubber overmoulded surfaces and finger-hugging curves give the user a
comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.
80PK-22 SureGrip™ Immersion Probe
Ì Type-K thermocouple for use in liquids and gels
Ì Measurement range: -40°C to 1090°C
80PK-24 SureGrip™ Air Probe
Ì Type-K thermocouple for use in air and non-caustic gas measurements
Ì Bead protected by perforated baffle
Ì Measurement range: -40°C to 816°C
80PK-25SureGrip™ Piercing Probe
Ì Type-K thermocouple suitable for food industry, liquids and gels
Ì Measurement range: -40°C to 350°C
80PT-25 SureGrip™ Piercing Probe
Ì 80PT-25: operates with T-type thermometers
Ì Measurement range: -196°C to 350°C
80PK-26 SureGrip™ General Purpose Probe
Ì Type-K thermocouple with tapered tip for use in air, non-caustic gas and surface applications
Ì Measurement range: -40°C to 816°C
80PK-27 SureGRip™ Industrial Surface Probe
Ì Type-K thermocouple for surfaces in rugged environment
Ì Durable ribbon sensor
Ì Measurement range: 127°C to 600°C
A low-cost data logger that measures and
stores temperature readings. The data logger
can be configured and the stored data downloaded by plugging the module into a PC’s
USB port and running the supplied control
software. The downloaded data can be
graphed, printed and exported to other applications.
Ì Stores up to 4000 temperature readings
Ì 30 days continuous use from a single
battery
Ì Supplied software supports Windows
98SE/2000/XP
Measurement Range
Internal Resolution
-10°C to +50°C
1 °C
3416
List No.
Order Code
491-7169
491-7170
491-7182
491-7194
491-7200
491-7212
1+
Accuracy (overall error)
Logging Rate
±3°C
every 30 minutes
415811.428945
Mftrs. List No.
Order Code
EL-USB-LITE
100-6157
1+
Temperature Data Logger with USB Interface
USB interface for set-up and data download
16,000 readings
-35 to +80°C measurement range
2 User-Programmable alarm thresholds
Bright red, green and amber LED status indication
Ì Replaceable internal lithium battery
Ì Translucent lid provides IP67 waterproof seal
Ì Supplied with batteries
Ì
Ì
Ì
Ì
Ì
Price Each
80PK-22
80PK-24
80PK-25
80PT-25
80PK-26
80PK-27
Measurement in °C or °F
Programmable logger name
Programmable high and low alarm limits
Red / Green alarm status indication at
the push of a button
Price Each
339464
Mftrs.
Ì
Ì
Ì
Ì
Module: H=20.5, W=20.5, L=94
Measurement Internal
Accuracy
Logging
Operating
Battery
Range
Resolution
(Overall Error)
Rate
Temperature
Life
-35 to +80°C 0.5°C
±1°C (typ.), ±2°C (Max.) 10 Sec. to 12 Hrs -25 to +80°C 1 Year (Min.)
338605.344023
Mftrs.
List No.
EL USB-1
Price Each
Order Code
491-3437
1+
farnell.com
Humidity measuring range
Resolution
Accuracy
Temperature measuring range
Thermocouple Data Logger with USB Interface
EL-USB-TC
element14.com
0 to 100% RH
0.5% RH
±3.5% RH
-35°C to +80°C
Resolution
Accuracy
Logging rate
3417
0.5% RH
±2°C
10 sec to 12 hours
381902.381932
Mftrs.
Price Each
List No.
Order Code
EL-USB-2
1+
852-2898
L = 118, Diameter = 27mm
This data logger measures and stores over 32,000 temperature readings from either a K, J
or T type thermocouple . A thermocouple is attached via the thermocouple socket at the
base of the unit. The user can easily set up the thermocouple type, thermocouple calibration, logging rate, start-time, logging mode, and download the stored data by plugging the
module straight into a PC’s USB port and running the purpose designed software under
Windows 98, 2000 or XP. Data can then be graphed, printed and exported to other applications. The data logger is supplied complete with a long-life lithium battery, which will last
for approximately 6 months. The data logger is protected
against moisture.
Measurement Range (K Type)
Measurement Range (J Type)
Measurement Range (T Type)
Resolution (Internal and displayed)
Logging Rate
Operating Temperature
Battery
Ì Logging rate (1s, 10s, 1m, 5m, 30m,
1hr, 6hr, 12hr)
Ì High and low alarms
Ì Start date and start Time
Ì Range of logging modes available
Ì Calibration facility
Contents: Data logger, software on CD, battery, 1.5m K-type thermocouple
-200°C to 1300°C
-130°C to 900°C
-200°C to 350°C
1°C
Min. (every 1s), Max. (every 12 hrs)
-35°C to 80°C
1⁄2AA 3.6V Lithium
489287.502078
Price Each
Mftrs. List No.
Order Code
EL-USB-TC
1+
EL-USB-CO
Measures and stores up to 32,000 Carbon
Monoxide (CO) readings over 0 to 300ppm
measurement range. The user can easily set
up the logging rate and start time, and download the stored data by plugging the module
into a PC’s USB port and running the supplied
software. The data can then be graphed, printed and exported to other applications. Data is
stored in non-volatile memory and is not lost
when the battery is flat. A bright red LED will
flash and an alarm will sound when a preset
alarm limit is exceeded.
Length = 112mm Ø27mm
Ì 0 to 300ppm CO Measurement Range
Ì Stores 32,000 readings
Ì Supplied software supports Windows
98SE/2000/XP
Ì
Ì
Ì
Ì
Measurement Range
Accuracy (overall error)
Logging Rate
Operating Temperature Range
0 to 200ppm CO
±15ppm (typical)
min: every 10s
USB Interface for Set-up and Data Download
User-Programmable Alarm Thresholds
Bright LED and audible alarm indication
Up to 3 months continuous operation from
supplied lithium battery
max: every 12h
-10 to 40°C
This product is not designed or approved for protecting humans or animal life against harmful concentrations of CO gas. If protection against harmful concentrations of CO gas is required, then the user should
employ a product that has been designed and approved for that purpose.
415828.428947
146-9293
Price Each
Real-Time USB Temperature and Humidity Monitor
Mftrs. List No.
EL-USB-RT
EL-USB-CO
Ì -10 to +60°C (+14 to +140°F) Temperature meaÌ USB Interface
surement
Ì User-Programmable alarm
Ì 0 to 100%RH Relative humidity measurement
thresholds for %RH & T
Ì Dew point indication via Windows Control Software
Windows Control Software
Easy to install and use. It provides an environment whereby the user can view the current
temperature and humidity or graph in real-time either the current data file or previously
saved files. The software can also show the current temperature and humidity in the notification area within the Window’s tool-bar. Right-clicking on the EL-USB-RT icon in the notification area enables the user to access the full functionality of the software with just one
click.
Contents: Data capture device, software on CD
Relative Humidity
Measurement Range
Repeatability
Accuracy (overall error) (20-80 %RH)
Response Time
0 to 100 %RH
±0.5 %RH
±4.5 %RH
5s
Temperature
Measurement Range
Repeatability
Accuracy (overall error)
Response Time
-10°C to 60°C
±0.3°C
±1.5°C
20s
489306
Price Each
Mftrs. List No.
Order Code
EL-USB-RT
1+
100-6159
USB to InfraRed Converter
51
USB-LINK-IR
Converts USB data into InfraRed format. This
allows a PC to communicate with other devices without the need for a wire link. To operate, simply plug USB-LINK-IR into a free
USB port, install the device driver and point
the USB-LINK-IR at the device you wish to
communicate with. USB-LINK-IR appears as
a COM port to PC applications and requires
no special software to operate. It requires no
batteries and no power adaptor, as it is powered from the host’s USB port. The module is
designed to work in existing COM port applications and is ideal for modern PCs which often have no RS232 port.
Ì Converts USB data into InfraRed format
Ì Transmit distance up to 1.0m
Ì Support for Windows 98SE/2000/XP,
MAC OS-X, Linux 2.40 and above
Ì Virtual COM port device driver
Baud Rate
Max. Communication Distance
9600 bps
1m
Ì Fully compatible with IrDA 1.4 and USB
1.1/2.0 specifications
Ì IrDA Data rate of 9600 Baud
Ì Designed to work with existing COM port
applications
Communication Cone
Operating Temperature Range
±15°
-10 to 50°C
415805.428944
Price Each
Mftrs. List No.
Order Code
USB-LINK-IR
100-6156
1+
ThermaTag Datalogger
TTKIT01 and TT01
1+
146-9295
Test Equipment – Environmental, HVAC & Pressure
When plugged into the USB port of
a PC installed with the purpose designed software under Windows
XP and Vista, EL-USB-RT measures temperature and relative humidity. The PC displays the temperature, humidity and dew point in
real-time and saves it to a file
which can store up to 7 day’s
worth of data. This data file is
overwritten at the beginning of
L = 77, W = 19, D = 11MM
each new logging session. The
software provides the option for the user to save the data file permanently to the harddrive. Temperature, relative humidity and dew point can be graphed, printed and exported
to other applications.
Order Code
Power, Test and Measurement
Ì USB Interface for set-up and data download
Ì 2 User-Programmable alarm thresholds
Ì Bright red and green LED Indication
Ì Replaceable internal lithium battery
Data Logger Set Ups:
Ì Logger name
Ì °C, °F
Carbon Monoxide (CO) Data
Logger with USB Interface
USB Relative Humidity and Temperature
Data Logger
EL-USB-2
L=103, W=27, D=27mm
Ì 16 000 RH readings
Ì 16 000 temperature readings
EL-USB-2 measures and stores relative humidity and temperature readings. Offers LED
status indication, user settable logging rate,
start-time and alarms. Downloads are stored
via a PCs USB port, software requires Win
98/2000 or XP and also allows humidity,
temp and dewpoint data to be graphed and
printed.
Ì 4 user-programmable alarms
Ì Status indicated by flashing red and green LED
The Digitron ThermaTag is a low cost single channel datalogger for temperature ranges
-40°C to 40°C or 0°C to 80°C, selectable via a user changeable link. Its compact size
makes it ideally suited for organisations requiring multiple loggers for critical temperature
monitoring of their products.
3417
3418
farnell.com
An 8 channel, PC based temperature data logger with USB interface. It can measure temperatures from -270°C to +1800°C and works with all popular types of thermocouple (B,
E, J, K, N, R, S, T). There is also a 60mV range that can be used for other types of sensor.
Supplied with PicoLog software for handling and analysis of all data.
Environmental Dataloggers - continued
ThermaTag Datalogger - continued
TTKIT01 and TT01 - continued
In addition to a green LED indicating the units active status the datalogger also features
programmable alarm limits. If an alarm condition occurs the integral red LED will flash indicating to the observer that the data logger has experienced temperature conditions outside
the pre-set parameters.
Once collected, the stored temperature readings (up to 2000) may be downloaded to a
computer through a cable interface (RS-232) using Digilog software, available in a number
of languages. Downloaded data may then be stored or transferred in a file format which is
compatible with most spread sheet packages.
Compact size and simple to use
Selectable temperature range:
-40°C to +40°C or 0°C to 80°C
Programmable limit alarms with integral
LED indicator
Ì 2000 Readings
Ì 12 month battery life
Ì
Ì
Ì
Ì
Power, Test and Measurement
Ì Free downloadable software - Excel
compatible
Ì Water resistant
Ì Robust construction
The kit is supplied with software and connection cable
Operating temp.-40°C to 40°C or 0°C to 80°C
Resolution
<0.1°C
Memory
2000 readings
Battery type
Lithium
Sample rate
60 sec. to 24 hours
Battery life
>1 Year (replaceable)
Alarm LEDs
4 sec red flash when alarm exceeded Size
42 x 27 x 13mm
Logging
8 sec green flash when active
Weight
20g
Memory full
16 sec green flash when full
Data recovery
Via plug and interface cable to PC
After down load Sleep
Recorder Start Up Programmed time/date
Accuracy
±0.5°C
339432
Mftrs.
Price Each
Description
List No.
Order Code
ThermaTag Kit
Additional datalogger
TTKIT01
TT01
500-4433
500-4445
1+
USB Data Logger
DrDAQ姞
DrDAQ has built in sensors for
light, temperature and sound. It can also measure voltage
and resistance. In addition it has a socket for standard pH
electrodes and connectors that allow the use of optional
external sensors for measuring.
51
Test Equipment – Environmental, HVAC & Pressure
Ì
Ì
Ì
Ì
Ì
Ì
Ì
Number of channels
Accuracy
Overload Potection
Conversion time
Input connectors
Common mode voltage
Output connector
Dimensions (WxDxH)
8
±(0.3%+0.5°C)
±10V
200ms for cold junction compensation
+ 200ms per active channel
Miniature thermocouple
±5V max
USB1.1 connector cable supplied
85 x 145 x 25mm
347749.344426
Mftrs.
Price Each
List No.
Order Code
TC08 USB
Relative Humidity and Temperature
Data Logger
HUMIDIPROBE
A straight forward and practical way to
monitor relative humidity and temperature readings, and record them directly
to your PC or laptop. The compact, allin-one probe design allows the HumidiProbe to be used in a wide range of applications from storage and transport,
environmental and meteorological, human comfort, server and IT room condition monitoring to production test.
Using the supplied PicoLog data acquisition software, data can be viewed both
during and after data collection in
spreadsheet or graphical format. Data can also be easily exported to other applications,
and software alarms can be configured for both temperature and relative humidity.
Ì Measures and records temperature and Ì Connects to a PC or laptop via USB port
relative humidity
- no power supply required
Ì Compact, all-in-one probe design
Ì Supplied with PicoLog data acquisition
Ì 0 to 100% (non-condensing) relative husoftware
midity measuring range
Ì Sample programs in C, Delphi, Excel,
Ì 0°C to +70°C temperature range
LabVIEW, and Visual Basic included
Ì Fast humidity response
417441.428885
Price Each
Description
No. of input channels
14
DC accuracy
±3%
Max. Sample rate
1 MS/s
Timebases
10 μs/div to 200 s/div
Bandwidth
100 kHz
PC connection
USB 2.0
Resolution
8 bits
Power supply
USB Port
Inputs characteristics BNC connector, 1 MΩ, DC coupledPC requirements Windows XP, Vista, Windows 7
Input ranges
±1.25 V, ±2.5 V, ±5 V, ±10 V
Order Code
HUMIDIPROBE
Easy-to-use paperless chart recorder with remote sensor and 49,000 readings memory.
Ideal to monitor and record temperature and
humidity conditions and history in controlled
environments, laboratories, clean rooms, storage and other critical areas.
627352
Order Code
USB DRDAQ
USB DRDAQ KIT
188-7216●
188-7217●
Accessories
PP163.
Humidity Probe
Ì Simultaneous numerical and graphical display of Humidity and Temperature readings
Ì Calculates Dew Point
1+
188-7218
Temperature Datalogger
USB TC-08
Ì Measures and records up to 8 thermocouples
Ì Works with all popukar thermocouple types
Ì High resolution and accuracy
Ì Wide temperature range (-270°C to
1800°C)
Ì Multiple units can be used on the
same PC if more than 8 channels
are required
Ì No power supply required
+
Paperless Humidity and Temperature Recorder
Price Each
List No.
1+
107-6341
Kit Content: USB DrDAQ, pH Electrode, 2 x 2m Temperature Sensors, Humidity Sensor,
Software CD, USB Installation Guide, 3m Sensor Extension Cable, Scope Probe x1/x10
Switchable and USB 2.0 1.8m Cable.
Mftrs.
1+
782-0178
Range
Accuracy Resolution Response Time
Temperature
0°C to +70°C ±0.5°C
0.01°C
5 to 30 seconds
Humidity
0 to 100% RH ±3% RH
0.03% RH
4 seconds
Conversion Time
2 seconds
Environmental
0 to 70°C (not waterproof)
PC Connection
USB 1.1 (USB 2.0 compatible)
Power Supply
From USB (50mA/port)
Supported Opertaing Systems
Windows XP (SP2), Vista and 7
DrDAQ as a data logger, oscilloscope and signal generator
Built-in sensors for light, sound and temperature
Measure pH - just plug in any standard pH electrode
Sockets for external sensors
Digital outputs to control external devices
USB connected and powered
Use up to 20 USB DrDAQs on a single PC
Ì Built in cold junction compensation
Ì Supplied with PicoLog data logging software
Ì USB interface ensures easy installation
Ì Large 120 x 75mm backlit LCD display with adjustable graphical resolution and pushbutton keypad
Ì Display indicates time, date, percentage of memory remaining and battery status
Ì Up to 49,000 data points internal memory and RS-232 interface for data transfer
Ì User-programmable recording intervals
Ì Detachable probe extends up to 1 metre for measurements in closed environments
(probe can be replaced as separate item and does not require recalibration)
Ì Audible and visual alarms with high and low limits
Ì Swivel keypad allows desk or wall mounting for easy viewing
Ì ExTerm software for Windows allows data transfer to PC, graphical display and export
as csv files to MS Excel for data analysis
Ì Supplied with built-in stand, detachable probe with 1m cable, RS232 cable, ExTerm data download software, AC/DC power adaptor and batteries
Thermometer
Range
-28°C to 60°C
Accuracy ±1.0°C
Humidity Meter
Range
10% to 95% RH
Accuracy
±3% RH
Physical
Battery
Dimensions (WxHxD)
Weight
3x AA batteries or AC adaptor
196 x 23 x 127mm
357 g
480525.466705
Ì Supports Windows XP, Vista and 7.
Price Each
Description
Paperless Recorder
3418
element14.com
Order Code
142-6149
1+
farnell.com
element14.com
3419
Barometers, Weather Stations & Office
Equipment
Hygrometer
608
608-H1
608-H2
Storage temperature
-40°C to +70°C
Battery type
9V block battery
Battery life
8736h
Measuring rate
18s
Weight
168g
Warranty
Measuring range
1 year
+10 to +95% RH
0 to +50°C
-20 to +50°C
+2 to 98% RH
-10 to +70°C
-40 to +70°C
Accuracy
±3% RH (+10 to +95% RH) ±1 digit
±2% RH (+2 to +98% RH) ±1 digit
Resolution
0.1% RH (0 to +100% RH)
0.1% RH (0 to +100% RH)
Probe type
NTC
NTC
Accuracy
±0.5°C (at 25°C) ±1 digit
±0.5°C (at 25°C) ±1 digit
Resolution
0.1°C (0 to +50°C)
0.1°C (-10 to +70°C)
0 to +50°C
-10 to +70°C
Operating temperature
Power, Test and Measurement
Ì Standard Testo 608-H1 hygrometer for continuous
measurement of humidity, temperature and dew
point
Ì The Testo 608-H2 alarm hygrometer with accuracy
of ±2%RH and LED alarm function reliably warns
you if limits have been exceeded
Ì Monitors ambient conditions and dew point in garden centres, storage and clean rooms, museums
and laboratories
Ì Stand alone or attachable
Ì With td dew point calculation and max/min display
Ì Humidity sensor not affected by water
Ì Testo 608-H2 comes with LED alarm to warns if limits are exceeded
234384
Mftrs.
Price Each
List No.
Order Code
608-H1
608-H2
369-5797
369-5803
1+
WMR100
ÌAll in one remote sensor
Ì Easy set up
Ì Full function weather station
Ì Weather forecast
Ì Indoor / outdoor temperature and humidity
Ì Outdoor windspeed and direction
Ì Barometric pressure and rainfall
Ì Heat index, windchill and dew-point calculations
Ì Max and Min memory
Ì PC download facility
486803.473978
Price Each
Order Code
143-0730
1+
Test Equipment – Environmental, HVAC & Pressure
Wireless Weather Station
51
3419
Download PDF