Senco | F75 | Clinching Staplers D & F Series

Clinching Staplers D & F Series
Clinching Staplers D & F Series
Lightweight tools feature self-contained staple driving slinching ability
SENCO’s extremely lightweight (2.7 lbs.) D Series Staplers
are designed for packaging applications. SENCO’s F Series
Staplers are widely used in packaging, display, and bedding
applications where staples must be driven and clinched.
Special throat depths are available for sisal models and
packaging models. The D & F Series Staplers provide
excellent performance with a minimum of maintenance.
D Series
The DFP stapler drives
F Series staples.
Used wherever two materials must be stapled and clinched.
D Series: Used in light assembly operations joining wood
and corrugated or other materials together. In shoemaking,
used for attaching wooden or steel shanks, upper to
insoles, vamps, straps, ornaments, and buckles. Widely
used in corrugated box fabrication. F Series: For stapling
sisal and other fillers in bedding. Ideal for recessed-end
packaging, preassembly setup, boxes, and displays. As a
cutting-room stapler for shoemaking, it fastens material up
to 20-ply thick.
F Series
The F75 drives
J Series staples.
The easy handling and speed of the D & F Series Staplers
cut fastening time dramatically, reduce fabrication costs,
and virtually eliminate operator fatigue. Least experienced
employees can reach operating proficiency in a couple of
hours. These staplers are designed for minimum maintenance, fast loading and long service life.
Clinching Staplers D & F Series
Tool Specifications:
D Series
Tool Weight: 2.7 lbs. (1.2 kg)
Height: 7-3/8" (187 mm)
Length: 8" (203 mm)
Lip Length: 1/2” (13 mm)
Jaw Openings: 9/116" or 13/16"
Throat Depth: 4-3/4"
Staple Capacity: 112-168, in various lengths and gauges
F Series
Tool Weight: 4.1 to 4.2 lbs. (1. 9 kg)
Height: 9-13/16" to 10-3/4" (249 mm to 273 mm)
Length: 14-5/8" (371 mm)
Lip Length: 1/2” to 5/8"(13 to 16 mm)
Throat Depth: 1-1/2" or 4" with sisal models; 4-3/4" with
Staple Capacity: 146-224, in various lengths and gauges
Air pressured required for both tools: 70-90 p.s.i.g.
D Series
F Series
Fastener Specifications:
F Series
Crown: 1/2”
Width:.50", Thickness:. 019"
J Series
Crown: 7/16"
Width:.075", Thickness:. 023"
D Series The DFP stapler drives F Series staples.
Dimensions shown may be converted into metric measure on
basis of 1 “ = 25.40 millimeters (mm).
F Series The F75 drives J Series staples.
For additional information on how SENCO fastening systems will save you time, reduce costs, and increase quality, call your nearest Authorized SENCO
Dealer or Distributor listed in the Yellow Pages under “Staples, “ or call our toll-free Action Line: 1-800-543-4596.
2001 by Senco Products, Inc. Order MK306 Litho in U.S.A. Visit our web site:
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF