Sami WS-2383 Owner's Manual

PDF
Document
EN
WEARABLE
User Manual
WS-2383
Thank you for purchasing the Sami wearable WS-2383. Read the instructions
carefully to obtain optimum results and preserve it for future reference.
DESCRIPTION OF THE WEARABLE.
CONTENTS.
Wearable, USB magnetic charging cable, instruction manual.
CHARGING.
Connect the device to a computer or laptop with the USB Magnetic cable for
charging. Put in contact the magnetic end of the USB cable with the charging
points positioned in the back of your device. Kindly use only the USB cable
included with the wearable. If you use a power adapter for charging, the
output of the power adapter should be 5V, 1A. Charging time: 1-2 hours approx.
Please charge the device fully before using it. Take care with the magnet side
of the cable, if you connect to the AC and you have contact with a metal
surface, you may damage the charging cable.
HOW TO POWER ON / POWER OFF?
1) To turn ON the smart band, long press the side button for a few seconds.
The side button is situated in the right of the of the screen.
2) To turn OFF the smart band, while the device is in the home screen menu,
one click the side button to enter in general menu. Then slide on the
screen from down to up until you reach the icon of Setting. Click on that
and than click on General, tap in the icon Power off and confirm to
shutdown to make it power off.
HOW TO CONTROL?
This device is equipped with a full touch display screen, it supports full screen
touch control and a side button
BUTTON PRESS
1) Short tap in the icon to select/enter in that menu. Slide from top/bottom to
go to the next/previous page. Long press on the selected icon to enter or
short press the side button to return to the previous interface.
2) In the home page, long press the screen for a few seconds until the screen
zooms out, then slide the screen up or down and select the digital clock
style you prefer to change it.
3) You can download and install more dials on the dial market by the app.
GETTING STARTED:
- For Android
1) How to obtain the BT Connection APK (VeryFit)
Search for the VeryFit APP in the Play Store; download it and install it in your
Android smartphone, or go to our website www.sami.es and download the
application.
2) Installation of the VeryFit APK.
When installing the VeryFit application on your Android, you must allow all the
Application Permissions, allow this VeryFit app auto run.
The first time you run this VeryFit app, it will ask you to Enable Notifications,
please tap OK and tap the VeryFit and confirm OK. You must tap
OK/Allow/Pair/Yes/Confirm for any pop-up request. On your Android permission
management, allow all application permissions.
3) How to make the wearable pair with your Android smart phone?
*First, turn on the Bluetooth of your Phone.
*Second, run the VeryFit app on your Phone, on the home page of VeryFit, find
the pairing request by the setting all your values requested and then select
“watch”. You must have the screen of the watch on and the APP will search for
new Bluetooth device(s), when the available Bluetooth device displays, please
select WS-2383 (the BT name of this device). Select the device on the app to
make it pair. Select “confirm tick” on the watch and the pairing will be finished
in a few seconds. When you pair for the first time, the VeryFit app will ask you to
o enable GPS and Bluetooth, and authorize VeryFit to get access to the
location service while using the app. Please accept all the requests for the
correct functioning of the device. When you finish select OK/Confirm/Allow for
any pop-up request.
4) In the case that on the watch you have the QR CODE on the screen, then in
the APP VeryFit click the icon of scan on the top left of the menu and scan the
qr code of the watch with the camera.
Important: To enable all notifications of different softwares such as WhatsAPP,
Facebook, Skype, Twitter, you will need to turn on the notifications on the APP
manually. On the VeryFit homepage, select the icon “Device” (situated on the
right bottom of the screen),  select “WS-2383”  select “message notification”
 turn on “Allow notification” and turn on all the APP notifications you want to
active. To confirm you must click on the
icon located on the top right.
THIS IS A NEW ERA SINGLE CONNECTION WATCH, IT WILL CONNECT THE BT CALL
DIRECTLY ON YOUR BLUETOOTH MENU SETTINGS.
- For iPhone
1) How to obtain the BT Connection APP (VeryFit)
Search for the VeryFit APP in the APP Store; download it and install it in your iOS
smartphone
2) Installation of the VeryFit APP.
When installing the VeryFit application on your iOS, you must allow all the
Application Permissions, allow this VeryFit app auto run.
The first time you run this VeryFit app, it will ask you to Enable Notifications,
please tap OK and tap the VeryFit and confirm OK. You must tap
OK/Allow/Pair/Yes/Confirm for any pop-up request. On your Android permission
management, allow all application permissions.
3) How to make the wearable pair with your Android smart phone?
*First, turn on the Bluetooth of your Phone.
*Second, run the VeryFit app on your Phone, on the home page of VeryFit, find
the pairing request by the setting all your values requested and then select
“watch”. You must have the screen of the watch on and the APP will search for
new Bluetooth device(s), when the available Bluetooth device displays, please
select WS-2383 (the BT name of this device). Select the device on the app to
make it pair. Select “confirm tick” on the watch and the pairing will be finished
in a few seconds. When you pair for the first time, the VeryFit app will ask you to
o enable GPS and Bluetooth, and authorize VeryFit to get access to the
location service while using the app. Please accept all the requests for the
correct functioning of the device. When you finish select OK/Confirm/Allow for
any pop-up request.
4) In the case that on the watch you have the QR CODE on the screen, then in
the APP VeryFit click the icon of scan on the top left of the menu and scan the
qr code of the watch with the camera.
* Now you can start using your desired functions of the smart band.
Important: To enable all notifications of different softwares such as WhatsAPP,
Facebook, Skype, Twitter, you will need to turn on the notifications on the APP
manually. On the VeryFit homepage, select the icon “Device” (situated on the
right bottom of the screen),  select “WS-2383”  select “message notification”
 turn on “Allow notification” and turn on all the APP notifications you want to
active. To confirm you must click on the icon
located on the top right
THIS IS A NEW ERA SINGLE CONNECTION WATCH, IT WILL CONNECT THE BT CALL
DIRECTLY ON YOUR BLUETOOTH MENU SETTINGS.
-PRODUCT FEATURES
BLUETOOTH (BLE 5.3)
FULL HD AMOLED TOUCH SCREEN 1.99&quot;
3D DISPLAY
BUILT IN VIBRATING MOTOR
BUILT IN HEART RATE SENSOR
BUILT IN GRAVITY SENSOR
GESTURE CONTROL TO LIGHT UP THE DISPLAY SCREEN
BUILT IN BLUETOOTH CALL FUNCTION WITH HD DSP CLEAR AUDIO
VOICE ASSISTANT
1) Time/Date/Battery displaying
2) Activity:
This watch can collect and display all your activity: Exercise/Activity/Walking
data and goals of the day, histogram of Exercise/Activity/Walking data per hour
throughout the day, Steps and Distance of the day, Recovery Time and Maximal
Oxygen Uptake for the latest Exercise, Daily Goal Setting, etc.
3) Sports – You can preset 12 sports mode on your watch and choose from 100
different sport modes including Outdoor Run/Indoor Run/Outdoor walk/Indoor
walk /Hiking/Outdoor cycle/Cricket/Yoga/Indoor cycle/Workout/
Rower/Elliptical.
Enter to the sports mode by selecting the sports icon,  select
the sport type  enter the sports countdown automatically.
During sports, to pause sports short press the side button, and
to restore sports short press the side button again. To end up
sports long press the icon on the screen and confirm end.
This device supports intelligent exercise recognition. It can recognize whether
the user is running/walking. It supports automatically pausing an exercise or
reminding when an exercise ends. This feature can be turned on/off on the
app.
4) Exercise record
Records the date of each exercise and you can view it any time.
5) Heart Rate
1. You can manually measure the heart rate on the watch. In the APP settings,
you can turn on/off the intelligent around-the-clock monitoring of the heart
rate, or view the heart data.
2. Each time heart rate is measured, keep your arm and wrist still and wait
patiently until the measurement finishes.
6) Blood oxygen
1. You can manually measure SPO2 on the watch. In addition, the watch
supports automatic around-the-clock SPO2 monitoring. In the APP settings, you
can turn on/off this function, or view the SPO2 data.
2. Each time blood oxygen is measured, keep your arm and wrist still and wait
patiently until the measurement finishes.
7) Blood Pressure
1. You can manually measure Blood Pressure on the watch.
2. Each time blood oxygen is measured, keep your arm and wrist still and wait
patiently until the measurement finishes.
8) Stress level measure
1. You can manually measure stress on the watch. In addition, the watch
supports automatic around-the-clock stress monitoring. In the APP settings, you
can turn on/off this function, or view the stress data.
2. Each time stress is measured, keep your arm and wrist still and wait patiently
until the measurement finishes.
9) Breathe Training: Helps you regulate your breathing and relax your mood.
1. Click Breath training icon to access this feature. you can choose the duration,
it helps adjust your breathing;
2. Click Start to directly enter the breath training animation. Follow the vibration
and animation frequency to adjust your breathing. Reasonable breath training
can help soothe your emotions.
10)
Sleep
You can view the most recent sleep record and sleep status at each stage.
11)
Weather forecast
Supports Current city Three-day weather viewing, you can view today’s &quot;current
weather, highest and lowest weather values&quot; and the &quot;highest and lowest
weather values&quot; for the next six days.
12) Music control – control music via bt on your mobile. Watch cannot
playback or store music
13)
Stopwatch
Use the watch as a stopwatch. The stopwatch has a “Lap” function.
14)
Alarm Clock
1. You can add, delete an alarm, or turn the alarm on/off on the watch, and also
set an alarm for the watch via the app.
2. You can set the alarm delay time and times in the APP to decide how long you
want to delay and how many times to delay.
15)
Timer
You can set a timer with a preset duration on the watch, and the timer will
remind you when the timer expires; you can customize the timer time.
16)
Find phone
17) Settings:
1. In the watch’s settings, you can set the screen-on time, ringtone volume and
vibration, etc.
2. In the watch’s settings, you can also shut down, restart or reset the watch
(once reset, all data stored in the watch will be cleared, and the watch will be
unpaired from your phone).
18) Reminder
The watch supports multiple reminder modes, including message reminder,
incoming call reminder, walking reminder, drinking reminder, exercise goal
reminder, exercise center rate warning reminder, etc
19) Phone
1.
2.
3.
You can add up to 10 frequent contacts to your watch through the app,
then call these contacts on your watch.
You can view recent call history on your watch and call the numbers
displayed in the call history.
You can make calls through the watch’s dialer.
Data can be sync from the wearable to the smart phone on the VeryFit
APK/APP.
Your smart phone will synchronize when the Bluetooth is paired with this device.
20)AI Voice
Controls your phones built-in voice assistants such as Siri or Google Assistant by
putting voice messages from the watch
FUNCTIONS
PHONE CALL NOTIFICATION - vibrating reminder for incoming phone calls and
display on screen. This function needs to be turned on manually at the VeryFit
APK/APP.
PHONE CALL - built in HD mic and speaker, can make call from dial pad or
contact list.
MESSAGE NOTIFICATION - vibrating reminder for incoming messages and
display on screen, including SMS, WhatsApp, Facebook, Twitter, Skype
messages, etc. This function needs to be turned on manually at the VeryFit
APK/APP. Memory for 10 messages.
CLOCK SCREENS (Different home digital clocks) - In the home screen of the
smart band, long press the screen for a few seconds to change the style of the
digital clock. You can also select the cloud dials from the APK/APP
SLEEP MONITOR - supported on the watch and VeryFit APK/APP
ALARM CLOCK - supported on the watch and VeryFit APK/APP
FIND THE DEVICE (Looking for your mobile phone) supported on the VeryFit
APK/APP
SEDENTARY REMIDER (REMIND TO MOVE) –set it on the VeryFit APK/APP
Do Not Disturb Mode – set it on the VeryFit APK/APP
GESTURE CONTROL (Raise your hand to light up the screen).
GPS MAP TRACE: view it on the BT APP/APK VeryFit when you do your sports.
TECHNICAL SPECIFICATIONS:
Display screen: Full Touch Amoled Screen 1.99&quot;
Screen resolution: 410 x 494 pixels.
Screen Swipe Refresh: 60FPS
Dial: Multi dial and Dynamic Dial
Internal Memory: 512Mb Nor Flash
MCU: SF32LB563
Touch Sensor: FT3168
Acceleration and gyroscopes: SC7A20H
Heart rate sensor: HX3918
Charge I/O port : USB magnetic charging cable
Battery: Built in Li-Polymer 350mAh
Stand by time: 8-10 DAYS
Working time with BT CALL: 3-5 DAYS
Bluetooth: BLE 5.3
Water-resist Rating: 3ATM this device resists 30 meters waterproof (3ATM). Not
valid for hot water shower due to vapor.
Weight: 47g silicone strap, 120 g steel strap
Declaration of Conformity
Hereby we,
Name of manufacturer:
SANTOSHI SL
Address:
CALLE FELIPE ASENJO N.56
Zip code &amp; City:
28947 - FUENLABRADA ( MADRID )
Country:
SPAIN
declare that this DoC is issued under our sole responsibility and that this product:
Product description:
Smart Watch
Type designation(s):
WS-2383
Trademark:
SAMI WEARABLE
is in conformity with the relevant Union harmonization legislation:
DIRECTIVE EMC 2014/30/EU
DIRECTIVE LVD 2014/35/EU
Standard CE (RED): DIRECTIVE 2014/53/EU
Standard RoHS: 2011/65/EU: (RoHS) Restriction of Hazardous Substance.
with reference to the following standards applied:
EN 60950-1: 2006+A11:2009+A1:2010+A12:2011+A2:2013
EN 62479:2010
EN 301 489-1 V2.1.1 (2017-02)
EN 301 489-17 V3.1.1 (2017-02)
EN 300 328 V2.1.1 (2016-11)
Signature
Full name: VISHAL MIRPURI
Position: ADMINISTRATOR
Date: 13/12/2023
">
Hello! I am an AI chatbot specifically trained to assist you with the Sami WS-2383 Owner's manual. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!