VIZIO
QUICK START GUIDE
Model: S3820w-C0
IMPORTANT SAFETY INSTRUCTIONS
Your Unit is designed and manufactured to operate within defined design limits, and misuse may result in electric
shock or fire. To prevent your Unit from being damaged, the following rules should be observed for its installation, use,
and maintenance. Please read the following safety instructions before operating your Unit. Keep these instructions
in a safe place for future reference.
• Do not overload power strips and extension cords. Overloading can result in fire or electric
shock.
• Read these instructions.
• Keep your Unit away from moisture. Do not expose your Unit to rain or moisture. If water penetrates into your Unit,
unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or
the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as when the power supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
• To reduce the risk of electric shock or component damage, switch off the power before connecting other
components to your Unit.
• Unplug the power cord before cleaning your Unit. A damp cloth is sufficient for cleaning. Do not use a liquid or a
spray cleaner on your Unit. Do not use abrasive cleaners.
• The wall socket should be located near your Unit and be easily accessible
• Do not use your Unit if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord
and contact your dealer immediately. Do not try to repair your Unit yourself.
• Avoid using dropped or damaged appliances. If your Unit is dropped and the housing is damaged, the internal
components may function abnormally. Unplug the power cord immediately and contact your dealer for repair.
Continued use of your Unit may cause fire or electric shock.
• Do not install your Unit in an area with heavy dust or high humidity. Operating your Unit in environments with
heavy dust or high humidity may cause fire or electric shock.
• Ensure that the power cord and any other cables are unplugged before moving your Unit.
• When unplugging your Unit, hold the power plug, not the cord. Pulling on the power cord may damage the wires
inside the cord and cause fire or electric shock. When your Unit will not be used for an extended period of time,
unplug the power cord.
• To reduce risk of electric shock, do not touch the connector with wet hands.
• Insert the remote control batteries in accordance with instructions. Incorrect polarity may cause the battery to
leak which can damage the remote control or injure the operator.
• See the important note and rating located on the back of the unit.
• WARNING - This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled
with liquid near the equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain, or moisture.
• CAUTION - Danger of explosion or fire if batteries are mistreated. Replace only with the same or specified type.
• Do not leave the batteries exposed to direct sunlight for a long period of time with doors and windows closed.
Do not disassemble the batteries or dispose of it in fire.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Explanation of WARNING symbols:
• Always use the accessories recommended by the manufacturer to insure compatibility.
The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to
the presence of not isolated dangerous voltage within the product that may be sufficient magnitude to
constitute a risk of shock to persons.
• When moving your Unit from an area of low temperature to an area of high temperature, condensation may
form in the housing. Wait before turning on your Unit to avoid causing fire, electric shock, or component damage.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and servicing instructions in the literature accompanying the appliance.
• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable
operation of your Unit and to protect it from overheating, be sure these openings are not blocked or covered. Do
not place your Unit in a bookcase or cabinet unless proper ventilation is provided.
• Never push any object into the slots and openings on your Unit enclosure. Do not place any objects on the
top of your Unit. Doing so could short circuit parts causing a fire or electric shock. Never spill liquids on your Unit.
• When connected to a power outlet, power is always flowing into your Unit. To totally disconnect power, unplug
the power cord.
PACKAGE CONTENTS
High Definition Sound Bar
Power Cable
Stereo RCA to 3.5mm
Audio Cable
2 x Sound Bar Wall
Mount Brackets
Remote Control
with Batteries
This Quick
Start Guide
Coaxial Audio
Cable
Digital Optical
Cable
2 x Wall
Mount Screws
(Size: M4 x
10mm)
Wall Mount
Template
CONTROLS & CONNECTIONS
Back of Sound Bar
L
DIGITAL (3)
AUX (1)
R
OPTICAL (4)
AUX (2)
AC IN
120V~ ∕ 60Hz
60W
AUX (1)
Analog Audio In
(Stereo RCA)
SERVICE
SUB OUT
USB (6)
L
DIGITAL (3)
AUX (1)
R
OPTICAL (4)
AUX (2)
AC IN
120V~ ∕ 60Hz
60W
Power Port
*Supports .WAV file format playback only
SERVICE
Service Port
For use by service
technicians only.
SUB OUT
USB (6)
USB* (6)
USB In
DIGITAL (3)
Coaxial In
OPTICAL (4)
Digital Optical Audio In
AUX (2)
Analog Audio In
(Stereo 3.5mm)
SUB OUT
Subwoofer Out
L
DIGITAL (3)
AUX (1)
R
OPTICAL (4)
AUX (2)
AC IN
120V~ ∕ 60Hz
60W
Back of Sound Bar
SERVICE
SUB OUT
USB (6)
Control Buttons are located here:
Power Press to turn soundbar on or off.
Input Press to change the audio source.
Bluetooth Input Hold to pair.
(See ‘Bluetooth Pairing’ for more information.)
+
-
Volume Increase or decrease the
loudness of the audio.
FIRST-TIME SETUP
Back of Sound Bar
1
L
DIGITAL (3)
AUX (1)
R
OPTICAL (4)
AUX (2)
AC IN
120V~ ∕ 60Hz
60W
GOOD
3.5MM TO
RCA CABLE
SERVICE
SUB OUT
USB (6)
BETTER
BETTER
DIGITAL COAXIAL
CABLE**
DIGITAL OPTICAL
CABLE**
GOOD
3.5MM TO
RCA CABLE
CHOOSE ONE CABLE:
BETTER
GOOD
AND CONNECT IT TO YOUR TV
*Not all TVs have the audio outputs shown above. To connect the Sound Bar directly to
your other devices (Blu-ray player, game system, etc.) see your device’s user manual.
**When using either of the Digital Inputs, if there is no audio: (A) try setting the TV
output to PCM or (B) Connect directly to your Blu-ray/other source, some TVs do not
pass through digital audio.
L
2
DIGITAL (3)
AUX (1)
Connect the Power Cable to
the Sound Bar.
R
OPTICAL (4)
AUX (2)
AC IN
120V~ ∕ 60Hz
60W
SERVICE
SUB OUT
USB (6)
L
DIGITAL (3)
AUX (1)
R
OPTICAL (4)
AUX (2)
AC IN
120V~ ∕ 60Hz
60W
SERVICE
SUB OUT
USB (6)
3
Plug the Power Cable into
a power outlet.
4
Sound Bar is centered
below the TV.
For the best surround sound experience, position the Sound Bar as shown.
The Sound Bar should be close to ear level.
5
Top
6
Top
Remove the battery cover
by gently sliding it away
from the remote.
7
Turn your TV on, then press the Power button
on the remote to turn the Sound Bar on.
Press the Input button to switch between
audio sources. For example, if you
connected your TV to Input 1, set the Sound
Bar to Input 1.
Hardware setup is complete.
Insert the included batteries
and gently slide the battery
cover back into place.
Input
Power
USING THE REMOTE
Input
Press to change input source.
Volume +
Press to increase volume.
Previous
Press to return to previous track.
(Changes Treble and Bass levels)
Bluetooth
Press to enter Bluetooth input.
(To enter force pair mode, press and hold for 5 seconds)
Power
Press to turn on or off.
Enter/Play/Pause
Press to select an option.
Press to play or pause.
Next
Press to skip to the next track.
(Changes Treble and Bass levels)
TruVolume
Press to enable/disable TruVolume.
TruSurround HD
Press to enable/disable TruSurround HD.
Mute
Press to mute/unmute.
Volume –
Press to decrease volume.
Treble
Press to enter treble adjustment mode.
Bass
Press to enter bass adjustment mode.
LED INDICATORS
LED Indicators are located here:
The LED Indicators will behave differently with each button on the remote control.
Function
LED Behavior
Analog Audio In - AUX (1)
Input
•
Analog Audio In - AUX Stereo RCA (1)
Coaxial In - Digital (3)
•
Analog Audio In - AUX Stereo 3.5mm (2)
•
Coaxial In- Digital (3)
•
Digital Optical Audio In - Optical (4)
•
Bluetooth
Digital Optical Audio In Optical (4)
(When searching for device)
DTS TruVolume
On/Off
DTS TruSurround
On/Off
Press the INPUT button on the remote to cycle through the available inputs:
Analog Audio In - AUX (2)
Bluetooth
Bluetooth Pairing
Description
Flash from Left to Right
and back continuously.
TruVolume On:
TruVolume Off:
TruSurround On:
TruSurround Off:
Press and hold the
button on the remote. The Sound Bar will be discoverable for 15
minutes. You can now search for the Sound Bar (VIZIO S3820w) using your Bluetooth Device.
The sound bar will power down if no device is found.
Note: Set your Bluetooth device into pairing mode prior to the Sound Bar.
Press the TVOL button to enable/disable TruVolume. When enabled (On), TruVolume
provides a consistent and comfortable volume level for a more enjoyable listening
experience.
Press the TSHD button to enable/disable DTS TruSurround. When enabled (On), all inputs will
produce virtual surround sound. When disabled (Off), all sources will playback in stereo.
Treble Levels
Two center LEDs indicate
Treble level 0.
Press the TREBLE button then press the Next/Previous button to increase/decrease the
treble level. The LED indicators will move to the right with increasing levels and to the left with
decreasing levels.
Bass Levels
Two center LEDs indicate
Bass level 0.
Press the BASS button then press the Next/Previous button to increase/decrease the bass
level. The LED indicators will move to the right with increasing levels and to the left with
decreasing levels.
Dolby Digital
Dolby Digital Logo.
Dolby Digital is only available on either the Coaxial In or Digital Optical Audio In inputs.
When a Dolby Digital signal is detected, the Dolby Digital logo will light up for 5 seconds
before fading away.
BLUETOOTH PAIRING
To pair the Sound Bar with a Bluetooth device:
1. Press and hold the Bluetooth button
on the Sound Bar or the Bluetooth button
on the remote for five (5) seconds.
When the Sound Bar is in Bluetooth Pairing Mode, the LED Indicators on the Display Panel on the front of the Sound Bar
will light sequentially from left to right and back again.
Once the device is paired, the LED Indicators will stop flashing.
2. You can now search for the Sound Bar (VIZIO S3820w) using your Bluetooth device. For more information, see the
documentation that came with your device.
3. Play audio from your Bluetooth device. Volume can be controlled on your source device and
the Sound Bar.
Back of Sound Bar
USING BLUETOOTH MODE
Your Sound Bar supports music streaming from smartphones, tablets, and computers with Bluetooth capability.
Device compatibility will vary, see your device’s documentation for more information. Once you have paired your
source device to the Sound Bar, as long as you stay within range of the Sound Bar, your device should remain
paired, even if you change the input on the Sound Bar.
Your Sound Bar is not equipped with a microphone, so it cannot operate as a hands-free
device for a smartphone.
Maximizing Signal
A Bluetooth signal has a range of up to 30 feet. Keep in mind that Bluetooth is a compressed audio format, so
streamed music may lose some integrity when compared to a wired connection.
Try the following if your sound quality is less than optimal:
•
If you hear any break-up or disconnect while streaming music from your device, move the source device
closer to the Sound Bar.
•
Be sure that there are no solid obstructions in the line-of-sight between the Sound Bar and the source
device.
•
Other wireless devices can affect Bluetooth range, including wireless security cameras, wireless video
baby monitors, cordless phones, and microwave ovens. Turning off or moving these devices may improve
Bluetooth range.
Reduce the volume levels on your device and on the Sound Bar before pressing Play. High volume
levels can damage your hearing.
ADVANCED SETUP
Connect up to four (4) different devices
to the Sound Bar (devices shown are
examples; you can use any device).
To listen to a device, change the input
source on the Sound Bar.
Optical, Coaxial, and 3.5mm cables
transmit audio only. Connecting a
video device requires a separate video
connection from the device to your TV.
RCA AUDIO
CABLE
L
DIGITAL (3)
AUX (1)
R
OPTICAL (4)
AUX (2)
AC IN
120V~ ∕ 60Hz
60W
DIGITAL COAXIAL
CABLE
Game Console
*Supports .WAV file format playback only
Back of Sound Bar
SERVICE
SUB OUT
USB (6)
USB
THUMB DRIVE*
Network Media Player
DIGITAL OPTICAL
CABLE
3.5mm AUDIO
CABLE
Tablet/MP3 Player/Laptop
CONNECTING A SUBWOOFER
Back of Sound Bar
L
DIGITAL (3)
AUX (1)
R
OPTICAL (4)
AUX (2)
AC IN
120V~ ∕ 60Hz
60W
SERVICE
SUB OUT
USB (6)
Optional Subwoofer*
To connect a subwoofer:
1.
Press the BASS button on the remote control to enter bass
adjustment mode.
2.
Use the Previous/Next buttons to adjust the bass level to
the center position.
3.
Power Off the Sound Bar and Subwoofer. Connect an
RCA cable from the Sound Bar to the Subwoofer.
4.
Power On the Sound Bar and Subwoofer.
5.
Manually adjust the SUB gain (Volume) and phase to
your preference. See your subwoofer’s user manual for
more information.
6.
Use the BASS button on the remote control to adjust the
subwoofer’s output.
RCA Subwoofer Cable*
*RCA subwoofer cable and subwoofer not included.
WALL MOUNTING THE SOUND BAR
1
Wall-Mount
Screw Holes
Back of Sound Bar
L
DIGITAL (3)
AUX (1)
R
OPTICAL (4)
AUX (2)
AC IN
120V~ ∕ 60Hz
60W
SERVICE
SUB OUT
USB (6)
Insert the two wall-mount screws into the wall-mount screw
holes, and then tighten them with a Phillips screwdriver.
2
Place the included wall mounting template against the wall
under your TV. Mark the four bracket holes using a pencil.
3
Be sure your screws are attached
to wood studs, drywall anchors
(for drywall), or concrete anchors
(for brick/concrete walls).
Screws for attaching the brackets
to the wall are not included.
Choose the screw type and
length appropriate to your home’s
construction. If in doubt, consult a
professional installer.
22.5 in
(571.5 mm)
Wall Mount Screw
Screw Size: M4 x 10
If you are unfamiliar with power tools or the layout of
electrical wiring in the walls of your home, consult a
professional installer.
USING BUTTON COMBINATIONS
There are 3 functions that are triggered by 3 different button combinations on the Sound Bar.
Function
LED Behavior
Description
Factory
Reset
All 12 LEDs will
flash 3 times:
Reset the Sound Bar to the factory default settings. To perform a Factory Reset, Press and Hold
the Bluetooth( ) and Volume Down (—) buttons for 5 seconds.
Note: This will erase all settings and preferences that you have set.
VIZIO TV
Remote
Control
Enable VIZIO TV Remote:
Disable VIZIO TV Remote:
Enable Energy Star:
Energy Star
Disable Energy Star:
Enable/disable the use of a VIZIO TV remote control to power on and adjust the volume
of the sound bar. To enable/disable this function, Press and Hold the Power (
) and
Volume Up ( + )buttons for 5 seconds.
When the Energy Star setting is enabled, the sound bar will automatically power down after
a period of inactivity. When disabled, the sound bar will remain powered on until you turn
it off. To enable/disable this function, Press and Hold the Power (
) and Volume Down (—)
buttons for 5 seconds.
Note: Energy Star setting is enabled by default.
Back of Sound Bar
Power
Input
Bluetooth Input
+
-
Volume
HELP & TROUBLESHOOTING
There is no power.
• Press the POWER button on the remote control or on the top of your Sound Bar.
• Ensure the power cord is securely connected.
• Plug a different device into the electrical outlet to verify that the outlet is working correctly.
There is no sound.
• Increase the volume. Press Volume Up on the remote control or on the top of your Sound Bar.
• Press MUTE on the remote to ensure the Sound Bar is not muted.
• Press INPUT on the remote or on the top of your Sound Bar to select a different input source.
• When using either of the Digital Inputs, if there is no audio: (A) Try setting the TV output to PCM or (B) Connect directly to
your Blu-ray/other source, some TVs do not pass through digital audio.
• On digital inputs, the input LEDs will flash rapidly if an unsupported format is present. Set the source to output PCM.
• Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED or STANDARD, not
VARIABLE. Consult your TV’s user manual for more detailed information.
• If using Bluetooth, ensure that the volume on your source device is turned up and that the device is not muted.
I hear buzzing or
humming.
• Ensure all cables and wires are securely connected.
• Connect a different source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does not, the problem may
be with the original device.
• Connect your device to a different input on the Sound Bar.
The remote
isn’t working.
• Replace the remote batteries with new ones.
• Point the remote directly at the center of the Sound Bar when pressing a button.
• If using a Bluetooth connection, some of the buttons on the remote may not be supported by the streaming
application. (e.g., Pandora doesn’t support the Back button.)
DO YOU HAVE QUESTIONS?
LET US HELP!
YOUR PRODUCT INCLUDES FREE LIFETIME TECH SUPPORT
The VIZIO support team is highly
trained and is based in the
United States.
We can help with:
• New Product Setup
• Connecting Your Devices
• Technical Problems
• And More
Phone: (877) 878-4946 (TOLL-FREE)
Email: techsupport@VIZIO.com
Web: http://store.VIZIO.com/support
Hours of operation: Monday - Friday: 5 am to 8 pm (PST)
Saturday - Sunday: 7 am to 4 pm (PST)
We speak English • Se habla Español • Nous parlons Français
VIZIO RECOMMENDS
M-Series Razor LED Smart TV
TM
The all-new VIZIO M-Series Razor LED™ Smart TV with Theater 3D® has arrived. With an ultra-modern design,
brilliant Razor LED™ picture quality, and the new, faster VIZIO Internet Apps Plus™ Smart TV experience, it’s the
must-have entertainment upgrade you’ve been waiting for.
Available at VIZIO.com
product sold separately
ONE-YEAR LIMITED WARRANTY
ON PARTS AND LABOR
Covers units purchased as new in United States and Puerto Rico Only
VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one year of non-commercial usage and ninety (90)
days of commercial use. If a Product covered by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the Product at its sole option
and discretion.
To obtain warranty service, contact VIZIO Technical Support via email: TechSupport@VIZIO.com or via phone at 877 MY VIZIO (877.698.4946) from 5:00AM to 9:00PM Monday through
Friday and 8:00AM to 4:00PM Saturday and Sunday, Pacific Time, or visit www.VIZIO.com. PRE-AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE
CENTER. Proof of purchase in the form of a purchase receipt or copy thereof is required to show that a Product is within the warranty period.
Parts and Labor
There will be no charge for parts or labor during the warranty period. Replacement parts and Products may be new or recertified at VIZIO’s option and sole discretion. Replacement parts
and Products are warranted for the remaining portion of the original warranty or for ninety (90) days from warranty service or replacement, whichever is greater.
Type of Service
Defective Products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for transportation costs to the service center, but VIZIO will cover return
shipping to the customer. PRE-AUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER FOR WARRANTY SERVICE.
Product returns to VIZIO’s service centers must utilize either the original carton box and shipping material or packaging that affords an equal degree of protection. VIZIO Technical Support
will provide instructions for packing and shipping the covered Product to the VIZIO service center.
Limitations and Exclusions
VIZIO’s one-year limited warranty only covers defects in materials and workmanship. This warranty does not cover, for example: cosmetic damage, normal wear and tear, improper
operation, improper voltage supply or power surges, signal issues, damages from shipping, acts of God, any type of customer misuse, modifications or adjustments, as well as installation
and set-up issues or any repairs attempted by anyone other than by a VIZIO authorized service center. Products with unreadable or removed serial numbers, or requiring routine
maintenance are not covered. This one year limited warranty does not cover Products sold “AS IS”, “FACTORY RECERTIFIED”, or by a non-authorized reseller.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND
DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE
OR LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL
LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE.
CHECK www.VIZIO.com FOR THE MOST CURRENT VERSION.
SPECIFICATIONS
Sound Bar:
Inputs:
Two 3” High-Efficiency Full-Range Transducers
Two 2” x 4” Bass Radiators
One 3.5mm Stereo Audio
One RCA Stereo Audio
One Optical (Toslink)
One Digital Coaxial Audio
Bluetooth (Wireless)
Sound Pressure Level (System):
98 dB
Frequency Response (System):
70 Hz - 19 KHz
Voltage:
Compliances:
120 VAC, 60 Hz
UL, C-UL, FCC
LEGAL & COMPLIANCE
FCC Class B Radio Interference Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
Notice:
1. The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct
such interference.
RF Exposure Information
This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to
radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
IC Statement
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired
operation of the device.
IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Disposal and Recycling
You must dispose of this product properly, according to local laws and regulations. Because this
product contains electronic components and a battery, it must be disposed of separately from
household waste. Contact local authorities to learn about disposal and recycling options.
Other:
Image(s) used under license from Shutterstock.com
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured
under license from DTS Licensing Limited. DTS, the Symbol,
& DTS and the Symbol together are registered trademarks,
and DTS TruSurround is a trademark of DTS, Inc. DTS, Inc. All
Rights Reserved.
For DTS patents, see http://patents.dts.com. Manufactured
under license from DTS Licensing Limited. DTS, the Symbol,
& DTS and the Symbol together are registered trademarks,
and DTS TruVolume is a trademark of DTS, Inc. © DTS, Inc.
All Rights Reserved.
This product qualifies for ENERGY STAR in the “factory
default” setting and this is the setting in which power
savings will be achieved. Changing the factory default
settings or enabling other features will increase power
consumption that could exceed the limits necessary to
qualify for ENERGY STAR rating.
We want to help you save energy.
© 2014 VIZIO INC. ALL RIGHTS RESERVED.
140109EM-B