Magnavox | MAS-30037 | User guide | Magnavox MAS-30037 User guide

User guide
S M A RT. V E RY S M A RT.
MAS-100 MINI HI-FI STEREO SYSTEM
T!
PORTAN
M
Return
your Warranty
Registration Card
within 10 days
I
Read this manual first!
Congratulations on purchasing this Magnavox product.
We’ve included everything you need to get started.
If you have any problems, Magnavox Representatives can
help you get the most from your new product by explaining:
• Hookups,
• First Time Setup, and
• Feature Operation.
Do not attempt to return this product to the store.
S
EE
W H Y INSI
DE
For fast help, call us first!
1-800-705-2000
Thank you for making Magnavox a part of your home!
1
pg 001-029/MAS100/37-Eng
1
5/9/02, 2:40 PM
8240 009 34231
CAUTION
Canada
English:
This digital apparatus does not exceed
the Class B limits for radio noise
emissions from digital apparatus as set
out in the Radio Interference
Regulations of the Canadian
Department of Communications.
Français:
Cet appareil numérique n'emet pas
de bruits radioélectriques dépassant
les limites applicables aux appareils
numériques de Class B prescrites dans
le Règlement sur le Brouillage
Radioélectrique édicté par le Ministère
des Communications du Canada.
Use of controls or adjustments or
performance of procedures other
than herein may result in hazardous
radiation exposure or other unsafe
operation.
ATTENTION
L'utilisation des commandes ou
réglages ou le non-respect des
procédures ci-incluses peuvent se
traduire par une exposition
dangereuse à l'irradiation.
ATENCIÓN
This warning label is located on the rear side
and inside this laser product.
: INVISIBLE
LASER RADIATION
WHEN OPEN. DO NOT STARE INTO BEAM.
CAUTION
El uso de mando o ajustes o la
ejecucción de métodos que no sean
los aquí descritos puede ocasionar
peligro de exposición a radiación.
INVISIBLE LASER RADIATION WHEN OPEN.
DANGER:AVOID DIRECT EXPOSURE TO BEAM.
JA SUOJALUKITUS OHITETTAESSA OLET
VARO! AVATTAESSA
ALTTIINANAKYMATTOMAALLE LASERSATEILYLLE. ALA
KATSO SATEESEEN.
VARNING!
OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD.
OCH SPARREN AR URKOPPLAD.BETRAKTA EJ STRÅLEN.
or
DANGER - Invisible laser radiation when open.
AVOID DIRECT EXPOSURE TO BEAM.
2
pg 001-029/MAS100/37-Eng
2
5/9/02, 2:40 PM
8240 009 34231
£
2
3
4
2
™
¡
%
(
%
^
7
)
8
#
3CD
CD / CD-R /
CD-RW COMPATIBLE
MINI HIFI STEREO SYSTEM
*
CHANGER
STANDBY-ON
&
1
2
3
4
FM•AM
CD 1
3 CD DIRECT PLAY
CD
^
CD 3
PREV•PRESET
DIGITAL SOUND
CONTROL
DYNAMIC
BASS BOOST
FULL AUTO STOP
DECK 1
PLAYBACK•RECORD
%
SEARCH /
TUNING
▲
DSC
DISC
CHANGE
CD 2
SEARCH /
TUNING
OPEN•CLOSE
6
MASTER VOLUME
TAPE
DEMO STOP
PROGRAM
NEXT•PRESET
CLOCK•TIMER
$
▲
5
7
8
9
TAPE 1•2
TUNER
DIM
#
@
CONTINUOUS PLAY
PLAYBACK
DECK 2
0
!
3
pg 001-029/MAS100/37-Eng
3
3
5/9/02, 2:40 PM
8240 009 34231
Return your Warranty Registration card today to
ensure you receive all the benefits you’re entitled to.
• Once your Magnavox purchase is
registered, you’re eligible to receive all
the privileges of owning a Magnavox
product.
• So complete and return the Warranty
Registration Card enclosed with your
purchase at once, and take advantage
of these important benefits.
Warranty
Verification
Owner
Confirmation
Model
Registration
Registering your product
within 10 days confirms
your right to maximum
protection under the
terms and conditions of
your Magnavox warranty.
Your completed Warranty
Registration Card serves
as verification of ownership in the event of product theft or loss.
Returning your Warranty
Registration Card right
away guarantees you’ll
receive all the information
and special offers which
you qualify for as the
owner of your model.
Know these
safety symbols
For Customer Use
Enter below the Serial No. which is located on the rear of the cabinet. Retain this
information for future reference.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
t
This “bolt of lightning” indicates uninsulated material
within your unit may cause
an electrical shock. For the safety of
everyone in your household, please do
not remove product covering.
s
The “exclamation point” calls
attention to features for
which you should read the
enclosed literature closely to prevent
operating and maintenance problems.
Model No. _______________________
Serial No. ________________________
WARNING: TO PREVENT
FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE.
CAUTION: To prevent electric
shock, match wide blade of plug to
wide slot, and fully insert.
MAC5097
4
pg 001-029/MAS100/37-Eng
4
5/9/02, 2:40 PM
8240 009 34231
ATION
y!
r
r
Hu
DED W
AY
EE
S REG
TR
N
IS
Visit our World Wide Web Site at http://www.magnavox.com
IT
HIN 10 D
Congratulations on your purchase,
and welcome to the “family!”
Dear Magnavox product owner:
Thank you for your confidence in Magnavox.You’ve selected one of the
best-built, best-backed products available today. And we’ll do everything in
our power to keep you happy with your purchase for many years to come.
As a member of the Magnavox “family,” you’re entitled to protection by
one of the most comprehensive warranties and outstanding service networks in the industry.
What’s more, your purchase guarantees you’ll receive all the information
and special offers for which you qualify, plus easy access to accessories
from our convenient home shopping network.
And most importantly you can count on our uncompromising commitment
to your total satisfaction.
All of this is our way of saying welcome – and thanks for investing in a
Magnavox product.
Sincerely,
Lawrence J. Blanford
President and Chief Executive Officer
P.S. Remember, to get the most from your Magnavox product,
you must return your Warranty Registration Card within
10 days. So please mail it to us right now!
5
pg 001-029/MAS100/37-Eng
5
5/9/02, 2:40 PM
8240 009 34231
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
12.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near
water.
Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer or sold with
the apparatus. When a cart is
used, use caution when moving
the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning
6. Clean only with a dry cloth.
storms or when unused for long periods of
time.
7. Do not block any ventilation
14. Refer all servicing to qualified service
openings. Install in accordance with
the manufacturer´s instructions.
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
8. Do not install near any heat sources
such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the
safety purpose of the
polarized or
AC Polarized
Plug
grounding-type plug.
A polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third grounding
prong.The wide blade or the third prong
are provided for your safety. If the provided
plug does not fit into your outlet, consult an
electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
15.Battery usage CAUTION – To
prevent battery leakage which may result in
bodily injury or damage to the unit:
●
Install all batteries correctly, + and - as
marked on the unit.
●
Do not mix batteries (old and new or
carbon and alkaline, etc.).
●
Remove batteries when the unit will not be
used for a long time.
EL 6475-E003: 01/6
11.Only use attachments/accessories
specified by the manufacturer.
Class II equipment symbol
This symbol indicates that the unit has
a double insulation system
6
pg 001-029/MAS100/37-Eng
6
5/9/02, 2:40 PM
8240 009 34231
English
Index
Français
English ------------------------------------------------ 8
E s p añ o l
Français -------------------------------------------- 33
Español --------------------------------------------- 59
7
pg 001-029/MAS100/37-Eng
7
5/9/02, 2:40 PM
8240 009 34231
Contents
English
General Information
Tape Operation/Recording
Supplied accessories ............................................ 9
Environmental information ................................ 9
Safety information ................................................ 9
Loading tape ........................................................ 21
Playing tapes ........................................................ 21
Rewinding/Fast forwarding ............................... 22
General information on recording ................. 22
Preparation for recording ................................ 22
One touch recording ......................................... 22
CD Synchronized start recording .................. 22
Dubbing tapes ..................................................... 23
Preparations
Rear connections ........................................ 10–11
Power
Antennas connection
Speakers connection
Inserting batteries into the remote control . 11
Controls
Controls on the system and remote
control .................................................................. 12
Basic Functions
Plug and Play ........................................................ 13
Demonstration mode ........................................ 14
Switching the system on ................................... 14
Switching the system to standby mode ........ 14
Dim mode ............................................................ 14
Volume control ................................................... 14
Sound control ..................................................... 15
Maintenance .............................................. 23
Clock/Timer
View clock ............................................................ 24
Clock setting ....................................................... 24
Timer setting ................................................ 24–25
Deactivating the timer
Activating the timer
Sleep timer setting ............................................. 25
Specifications ........................................... 26
Troubleshooting ............................. 27–28
DSC (Digital Sound Control)
DBB (Dynamic Bass Boost)
CD Operation
Discs for playback .............................................. 16
Loading discs ....................................................... 16
Playing discs ......................................................... 17
Selecting a desired track/passage .................... 17
Replacing discs during playback ...................... 17
Repeat and Shuffle ....................................... 17–18
Repeat play
Random play
Programming the disc tracks ........................... 18
Erasing the program .......................................... 18
Radio Reception
Tuning to radio stations .................................... 19
Storing preset radio stations .................... 19–20
Automatic preset programming
Manual preset programming
Tuning to preset radio stations ....................... 20
Erasing a preset radio station .......................... 20
8
pg 001-029/MAS100/37-Eng
8
5/9/02, 2:40 PM
8240 009 34231
General Information
● Before operating the system, check that the
operating voltage indicated on the typeplate (or
the voltage indication beside the voltage
selector) of your system is identical with the
voltage of your local power supply. If not, please
consult your dealer.
● Place the system on a flat, hard and stable
surface.
● Place the system in a location with adequate
ventilation to prevent internal heat build-up in
your system. Allow at least 10 cm (4 inches)
clearance from the rear and the top of the unit
and 5 cm (2 inches) from each side.
Supplied accessories
–
–
–
–
Safety information
English
This system complies with the FCC rules,
Part 15 and with 21 CFR 1040.10.
Operation is subject to the following two
conditions:
– This device may not cause harmful
interference, and
– This device must accept any interference
received, including interference that may
cause undesired operation.
2 speaker boxes
remote control
AM loop antenna
FM wire antenna
Environmental information
All unnecessary packaging has been omitted. We
have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).
Your system consists of materials which can be
recycled and reused if disassembled by a
specialized company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
● Do not expose the system, batteries or discs to
excessive moisture, rain, sand or heat sources
caused by heating equipment or direct sunlight.
● The lens may cloud over when the system is
suddenly moved from cold to warm
surroundings, making it impossible to play a disc.
Leave the system in the warm environment until
the moisture evaporates.
● The mechanical parts of the set contain selflubricating bearings and must not be oiled or
lubricated.
● When the system is switched to Standby
mode, it is still consuming some power.
To disconnect the system from the
power supply completely, remove the AC
power plug from the wall socket.
9
pg 001-029/MAS100/37-Eng
9
5/9/02, 2:40 PM
8240 009 34231
Preparations
English
AM loop
antenna
FM wire antenna
speaker
(right)
C
+ R –
B
speaker
(left)
– L +
A
AC power cord
B Antennas Connection
Rear connections
The type plate is located at the rear of the
system.
A Power
Connect the supplied AM loop antenna and FM
antenna to the respective terminals. Adjust the
position of the antenna for optimal reception.
AM Antenna
Before connecting the AC power cord to the
wall outlet, ensure that all other connections
have been made.
WARNING!
– For optimal performance, use only the
original power cable.
– Never make or change any connections
with the power switched on.
Fix the claw
to the slot
● Position the antenna as far as possible from a TV,
VCR or other radiation source.
10
pg 001-029/MAS100/37-Eng
10
5/9/02, 2:40 PM
8240 009 34231
Preparations
FM Antenna
1
English
Inserting batteries into the
remote control
Insert two batteries type R03 or AAA (not
supplied) into the remote control with the
correct polarity as indicated by the "+" and
"-" symbols inside the battery compartment.
2
● For better FM stereo reception, connect an
outdoor FM antenna to the FM AERIAL (FM
ANTENNA) terminal.
C Speakers Connection
Front Speakers
Connect the speaker wires to the SPEAKERS
terminals, right speaker to "R" and left speaker to
"L", colored (marked) wire to "+" and black
(unmarked) wire to "-".
1
2
● Fully insert the stripped portion of the speaker
wire into the terminal as shown.
Notes:
– For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of +/- speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
CAUTION!
– Remove batteries if they are exhausted
or will not be used for a long time.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical substances, so
they should be disposed off properly.
Notes for remote control:
– First select the source you wish to control
by pressing one of the source select keys on
the remote control (for example CD 1/2/3,
TUNER).
– Then select the desired function (for
exampleÉ, í, ë).
11
pg 001-029/MAS100/37-Eng
11
5/9/02, 2:40 PM
8240 009 34231
Controls (illustrations on page 3)
English
Controls on the system and
remote control
$n
–
1 STANDBY ON y
–
–
^
to switch the system on or to standby mode.
2 TAPE (TAPE 1/2)
–
to select tape mode.
3 TUNER (FM•AM)
–
to select waveband : FM or AM.
4 CD 1 / CD 2 / CD 3 (CD 1/2/3)
–
to select disc tray 1, 2 or 3.
5 CD OPEN/CLOSE
–
to open or close the disc tray.
6 DISC CHANGE
–
to change disc(s).
7 DIGITAL SOUND CONTROL (DSC)
–
8
–
9
0
!
@
–
#
–
to select the desired sound effect :
JAZZ, ROCK, TECHNO or OPTIMAL.
DYNAMIC BASS BOOST (DBB)
to select the desired bass boost level.
PROGRAM
for CD ................. to program disc tracks.
for Tuner ............. to program preset radio stations.
for Clock ............ to select 12- or 24-hour clock
mode.
for Timer ............. to select CD program mode as
the wake up source.
Tape deck 1 operation
â .......................... to start recording.
É .......................... to start playback.
à / á ............... to rewind or fast forward.
70 ........................ to stop playback/recording or to
open the tape door.
Å .......................... to interrupt playback or
recording.
Tape deck 2 operation
É .......................... to start playback.
à / á ............... to rewind or fast forward.
70 ........................ to stop playback or to open the
tape door.
Å .......................... to interrupt playback.
CLOCK•TIMER
to view the clock, set the clock or set the timer.
DIM
to select different brightness for the display
screen : DIM 1, DIM 2, DIM 3 or DIM OFF.
to connect headphones.
% MASTER VOLUME 3
&
–
*
(
–
)
–
¡
–
™
–
£
–
4 (VOL +/-)
to increase or decrease the volume.
Mode Selection
PLAY•PAUSE ÉÅ
for CD ................. to start or interrupt playback.
for Plug & Play…(on the system only) to initiate
and start plug & play mode.
SEARCH/TUNING à á
for CD ................. to search backward/forward.
for Tuner ............. to tune to a lower or higher
radio frequency.
for Clock ............ (on the system only) to set the
hour.
STOP•CLEAR / DEMO STOP Ç
for CD ................. to stop playback or to clear a
program.
for Tuner ............. (on the system only) to stop
programming or to erase a
selected preset.
for Demo ........... (on the system only) to activate/
deactivate the demonstration.
for Clock ............ (on the system only) to exit clock
setting or cancel timer.
for Plug & Play…(on the system only) to exit plug
& play mode.
PREV í / NEXT ë (PRESET 4 / 3 )
for CD ................. to skip to the beginning of the
current, previous, or next track.
for Tuner ............. to select a preset radio station.
for Clock ............ (on the system only) to set the
minute.
Display screen
to view the current status of the system.
Disc tray
REPEAT
to playback track(s)/disc(s)/program repeatedly.
MUTE
to interrupt or resume sound reproduction.
SHUFFLE
to playback all available discs and their tracks/
program in random order.
SLEEP
to activate/deactivate or set the sleep timer.
B
to switch the system to standby mode.
12
pg 001-029/MAS100/37-Eng
12
5/9/02, 2:40 PM
8240 009 34231
STANDBY-ON
2
FM•AM
TAPE 1•2
TUNER
CD 1
3 CD DIRECT PLAY
CD
MASTER VOLUME
TAPE
CD 2
CD 3
SEARCH /
TUNING
PREV•PRESET
▲
DSC
DIGITAL SOUND
CONTROL
SEARCH /
TUNING
NEXT•PRESET
DEMO STOP
PROGRAM
DYNAMIC
BASS BOOST
CLOCK•TIMER
IMPORTANT!
Before you operate the system, complete
the preparation procedures.
Plug and Play
Plug and Play allows you to store all available
radio stations automatically.
First time setup/power up
1
When you turn on the main power, "AUTO
INSTALL - PRESS PLAY" is displayed.
2
PressÉÅ on the system to start installation.
➜ "INSTALL" is displayed, followed by "TUNER"
and "AUTO".
➜ PROG starts flashing.
➜ All available radio stations with sufficient signal
strength will be stored automatically, starting
from FM and followed by AM band.
➜ When all the available radio stations are
stored or the memory for 40 presets are used,
the last preset radio station will be played.
▲
OPEN•CLOSE
DISC
CHANGE
English
Basic Functions
DIM
To exit without storing the Plug and Play
● Press Çon the system.
➜ If you do not complete the Plug and Play
installation, the function will be restarted when
you next turn on the main power again.
Notes:
– When the power is turned on, the disc tray may
open and close to initialize the system.
– If no stereo frequency is detected during
Plug and Play, "CHECK ANTENNA" will be
displayed.
– During Plug and Play, if no button is pressed
within 15 seconds, the system will exit Plug and
Play mode.
To reinstall Plug and Play
1
In Standby or Demonstration mode, press and
holdÉÅ on the system until "AUTO INSTALL
- PRESS PLAY" is displayed.
2
PressÉÅ again to start installation.
➜ All previously stored radio stations will be
replaced.
13
pg 001-029/MAS100/37-Eng
13
5/9/02, 2:40 PM
8240 009 34231
Basic Functions
English
Demonstration mode
Dim mode
The system has a demonstration mode that
shows the various available features.
You can select the desired brightness for the
display.
To activate the demonstration
● In standby mode, press and holdÇon the
system until "WELCOME" is displayed.
➜ The demonstration will begin.
To deactivate the demonstration
● Press and holdÇon the system until
"DEMO OFF" is displayed.
➜ The system will switch to standby mode.
Note:
– If you have not deactivated the demonstration, it
will resume five seconds after the system switches
to standby mode.
Switching the system on
In standby/demonstration mode
● Press STANDBY ON to switch on the last
selected source.
● Press CD 1/2/3, TUNER or
TAPE (TAPE 1/2).
● Press CD OPEN/CLOSE.
➜ The system will switch to CD mode.
Switching the system to standby
mode
In demonstration mode
● Press and hold Ç on the system.
In any other source mode
● Press STANDBY ON (or B on the remote
control).
➜ The clock will appear on the display when the
system is in standby mode.
● In any source mode (except standby mode),
press DIM repeatedly to select : DIM 1, DIM 2,
DIM 3 or DIM OFF.
➜ DIM is shown, except for DIM OFF mode.
DIM
mode
Brightness
Spectrum
Analyzer
1
normal
off
2
half
on
3
half
off
OFF
normal
on
Note:
– In standby mode, pressing DIM to select half or
full brightness for clock display.
Volume control
Press MASTER VOLUME 3 or 4 (VOL +
or - on the remote control) to increase or
decrease the volume level.
To listen through the headphones
● Connect the headphones plug to
the n socket at the front of the
system.
➜ The speakers will be muted.
To switch off the volume temporarily
● Press MUTE on the remote control.
➜ Playback will continue without sound and
"MUTE" is displayed.
● To restore the volume, press MUTE again or
increase the volume level.
14
pg 001-029/MAS100/37-Eng
14
5/9/02, 2:40 PM
8240 009 34231
Basic Functions
English
Sound control
DSC (Digital Sound Control)
The DSC feature enables you to enjoy special
sound effects that have preset equalizer settings,
which provide improved music reproduction.
● Press DSC to select : JAZZ, ROCK, TECHNO or
OPTIMAL.
➜ The selected DSC is shown.
DBB (Dynamic Bass Boost)
There are three DBB settings to enhance the
bass response.
● Press DBB repeatedly to select a bass boost
level.
➜ “DBB 1 (or 2/3)” and the respective bass
boost level are shown.
To deactivate DBB
● Press DBB repeatedly until ““DBB OFF” is
displayed.
Note:
– Some discs or tapes might be recorded in high
modulation, which causes a distortion at high
volume. If this occurs, switch off DBB or reduce the
volume.
Automatic DSC-DBB selection
The best DBB setting is generated automatically
for each DSC selection. You can manually select
the DBB setting that best suits your listening
environment.
DSC
DBB
JAZZ
off
ROCK
on (3)
TECHNO
on (3)
OPTIMAL
on (2)
15
pg 001-029/MAS100/37-Eng
15
5/9/02, 2:40 PM
8240 009 34231
CD Operation
English
CD / CD-R /
CD-RW COMPATIBLE
MINI HIFI STEREO SYSTEM
3CD
CHANGER
STANDBY-ON
2
FM•AM
TAPE 1•2
TUNER
CD 1
3 CD DIRECT PLAY
CD
CD 2
CD 3
SEARCH /
TUNING
PREV•PRESET
▲
DSC
DIGITAL SOUND
CONTROL
SEARCH /
TUNING
NEXT•PRESET
DEMO STOP
PROGRAM
DYNAMIC
BASS BOOST
CLOCK•TIMER
IMPORTANT!
– This system is designed for regular discs.
Therefore, do not use any accessories such
as disc stabilizer rings or disc treatment
sheets, etc., which may jam the changer
mechanism.
– Do not load more than one disc into
each tray.
▲
OPEN•CLOSE
DISC
CHANGE
MASTER VOLUME
TAPE
DIM
Loading discs
1
Press CD OPEN/CLOSE to open the disc
tray.
2
Load up to two discs on the individual disc trays.
To load the third disc, press DISC CHANGE.
➜ The disc tray will rotate until the empty tray
is ready for loading.
Discs for playback
This system can playback all digital audio CD,
finalized digital audio CD-Recordable (CDR)
discs and finalized digital audio CD-Rewritable
(CDRW)discs.
2
1
OPEN•CLOSE
3
CD CHANGER
VOLUME
DEMO
CLOCK.TIMER
2
CD TAPE
RECORD
TIMER SET
1
2
3
SHUFFLE
FMMW
SW LW
STEREO
RECORD PROGRAM
FRONT DBB
BACK
HSD
AMPM
NR
TIMER
PRESET
3
PLAY
MODE
PROGRAM
SET CLOCK
1
SIDE
RDS
MODE
CLEAR
DUBBING
BAND
SHUFFLE
TIMER
TUNING
Press CD OPEN/CLOSE to close the disc
tray.
➜ "READING" is displayed. The selected disc
tray, total number of tracks and the playing time
will appear on the display.
Notes:
– Load the discs with the label side facing up.
– To ensure good system performance, wait until
the disc tray completely reads the disc(s) before
proceeding.
16
pg 001-029/MAS100/37-Eng
16
5/9/02, 2:40 PM
8240 009 34231
CD Operation
a disc is loaded in the disc tray
To skip to the beginning of the current
track during playback
● Press í once.
the current selected disc tray is empty
the current selected disc tray is loaded
or playing
To play all discs on the disc tray
● PressÉÅ.
➜ All the available discs will play once, then stop.
➜ During playback, the selected disc tray, track
number and elapsed playing time of the current
track are displayed.
English
Playing discs
Replacing discs during playback
1
Press DISC CHANGE.
➜ The disc tray will open without interrupting
current playback.
2
To change the inner disc, press DISC
CHANGE again.
➜ "DISC CHANGE" is displayed and the disc
will stop playing.
➜ The disc tray will close to retrieve the inner
disc, then reopen with the inner disc accessible.
To play the selected disc only
● In CD mode, press CD 1, CD 2 or CD 3 on
the system.
➜ The selected disc will play once, then stop.
Repeat and Shuffle
To interrupt playback
● PressÉÅ.
➜ The current track time flashes.
Repeat play
You can select and change the various play
modes before or during playback.
1
Press REPEAT on the remote control
repeatedly to select :
➜ "TRACK" – to repeat playback of the current
track.
➜ "DISC" – to repeat playback of the current
disc.
➜ "ALL" or "PROGRAM" – to repeat playback of
all available discs or programmed tracks.
To search for a particular passage during
playback
● Press and hold à or á and release it when
the desired passage is located.
➜ During searching, the volume will be reduced.
2
To resume normal playback, press REPEAT
until "REPEAT OFF" is displayed.
➜ REP is shown, except for REPEAT OFF mode.
To select a desired track
● Press í or ë repeatedly until the desired
track is displayed.
1
Press SHUFFLE on the remote control.
➜ SHUF is shown and "SHUFFLE" is displayed.
➜ All the available discs or programmed tracks
(if program is active) will be played in random
order.
2
To resume normal playback, press SHUFFLE
again.
➜ SHUF disappears.
● To resume playback, pressÉÅagain.
To stop playback
● Press Ç.
Selecting a desired track/passage
Random play
● If playback is stopped, pressÉÅ to start
playback.
Note:
– In Shuffle mode, pressingí will cause the
player to skip only to the beginning of the current
track.
17
pg 001-029/MAS100/37-Eng
17
5/9/02, 2:40 PM
8240 009 34231
CD Operation
English
Notes:
– During program play or shuffling mode, it is not
possible to repeat playback for the current disc
(Repeat Disc mode).
– Pressing the CD OPEN/CLOSE button will cancel
all repeat and shuffling modes.
Programming the disc tracks
Programming tracks is possible when playback is
stopped. Up to 40 tracks can be stored in the
memory in any order.
1
Load the desired discs on the disc tray (refer to
“Loading discs”).
2
Press PROGRAM to start programming.
➜ PROG starts flashing.
3
4
Press CD 1/2/3 to select a disc.
Press í or ë repeatedly to select the desired
track.
5
Press PROGRAM to store the track.
● Repeat steps 3–5 to store other discs and
tracks.
6
To end programming, press Ç once .
➜ PROG stays and the program mode remains
active.
➜ The total number of tracks programmed and
the total playing time are displayed.
7
To start program play, pressÉÅ.
➜ "PLAY PROGRAM" is displayed.
To review the program
● Stop playback and press í or ë repeatedly.
● To exit review mode, press Ç.
Erasing the program
● Press Ç once when playback is stopped or
twice during playback.
➜ PROG disappears and "PROGRAM CLEARED"
is displayed.
Note:
– The program will be erased when the system is
disconnected from the power supply or when the
disc tray is opened.
For Recording, please refer to “Tape
Operation/Recording”.
Notes:
– If the total playing time is more than "99:59"
or if one of the programmed tracks has a number
greater than 30, then "--:--" is displayed
instead of the total playing time.
– If you attempt to program more than 40 tracks,
"FULL" is displayed.
– During programming, if no button is pressed
within 20 seconds, the system will exit the Program
mode automatically.
18
pg 001-029/MAS100/37-Eng
18
5/9/02, 2:40 PM
8240 009 34231
STANDBY-ON
2
FM•AM
TAPE 1•2
TUNER
CD 1
3 CD DIRECT PLAY
CD
MASTER VOLUME
TAPE
CD 2
CD 3
SEARCH /
TUNING
PREV•PRESET
▲
DSC
DIGITAL SOUND
CONTROL
SEARCH /
TUNING
NEXT•PRESET
DEMO STOP
PROGRAM
DYNAMIC
BASS BOOST
CLOCK•TIMER
DIM
Tuning to radio stations
1
Press TUNER to select TUNER mode.
➜ "TUNER" is displayed. A few seconds later, the
current radio frequency will appear on the
display.
➜ If an FM station is received in stereo, is
displayed.
2
Press TUNER again to select the desired
waveband : FM or AM.
3
Press and hold à or á until the frequency
indication starts to change, then release.
➜ The display will show "SEARCH" until a radio
station with sufficient signal strength is found.
4
Repeat step 3 if necessary until you find the
desired radio station.
● To tune to a weak station, press à or á briefly
and repeatedly until optimal reception is found.
Storing preset radio stations
You can store up to 40 preset radio stations in
the memory.
▲
OPEN•CLOSE
DISC
CHANGE
English
Radio Reception
To begin automatic preset from a desired
preset number
● Press í or ë to select the desired preset
number.
➜ If a radio station has been stored in one of
the presets, it will not be stored again under
another preset number.
2
Press and hold PROGRAM until "AUTO" is
displayed.
➜ PROG starts flashing.
➜ All available radio stations with sufficient signal
strength will be stored automatically, starting
from FM and followed by AM band.
➜ When all the available radio stations are
stored or the memory for 40 presets are used,
the last preset radio station will be played.
To stop storing the automatic preset
● Press PROGRAM or Ç on the system.
Note:
– If no preset number is selected, automatic preset
will begin from preset (1) and all your former
presets will be overridden.
Automatic Preset Programming
● Plug and Play setting (refer to “Basic Functions Plug and Play”).
OR
1
Press TUNER to select TUNER mode.
19
pg 001-029/MAS100/37-Eng
19
5/9/02, 2:40 PM
8240 009 34231
Radio Reception
English
Erasing a preset radio station
Manual Preset Programming
1
Tune to your desired radio station (refer to
“Tuning to radio stations”).
1
2
Press PROGRAM.
➜ PROG starts flashing.
➜ The next available preset number is displayed
for selection.
2
To store the radio station to another
preset number
● Press í or ë to select the desired preset
number.
3
Press PROGRAM again to store the radio
station.
➜ PROG disappears.
● Repeat steps 1–3 to store other radio stations.
Press í or ë to select the preset radio station
to be erased.
Press and hold Çon the system until “PRESET
DELETED” is displayed.
➜ The deleted radio frequency remains on the
display.
➜ The preset numbers of all other preset radio
stations in the band with higher numbers are
also decreased by one.
● Repeat steps 1–2 to erase other preset radio
stations.
For Recording, please refer to “Tape
Operation/Recording”.
To exit manual preset mode
● Press Ç on the system.
Notes:
– If you attempt to store more than 40 preset
radio stations, "FULL" is displayed.
– During programming, if no key is pressed within
20 seconds, the system will exit the Program mode
automatically.
Tuning to preset radio stations
● Once you’ve programmed the radio stations,
press í or ë to select the desired preset
number.
➜ The preset number, radio frequency, and
waveband are displayed.
20
pg 001-029/MAS100/37-Eng
20
5/9/02, 2:40 PM
8240 009 34231
English
Tape Operation / Recording
STANDBY-ON
2
FM•AM
TAPE 1•2
TUNER
CD 1
3 CD DIRECT PLAY
CD
TAPE
CD 2
CD 3
SEARCH /
TUNING
PREV•PRESET
DIGITAL SOUND
CONTROL
▲
DSC
SEARCH /
TUNING
DEMO STOP
PROGRAM
DYNAMIC
BASS BOOST
FULL AUTO STOP
DECK 1
NEXT•PRESET
CLOCK•TIMER
DIM
CONTINUOUS PLAY
PLAYBACK
PLAYBACK•RECORD
IMPORTANT!
– Before playing a tape, check and tighten
slack tape with a pencil. Slack tape may
jam or burst in the mechanism.
– C-120 tape is extremely thin and is easily
deformed or damaged. It is not
recommended for use in this system.
– Store the tapes at room temperature and
do not put them too close to a magnetic
field (for example, a transformer, TV or
speaker).
Loading tape
1
▲
OPEN•CLOSE
DISC
CHANGE
MASTER VOLUME
Press TAPE to select TAPE
mode.
➜ "TAPE" is displayed.
DECK 2
Playing tapes
To playback a selected tape deck
● PressÉ on tape deck 1 or 2.
➜ The tape will stop at the end of playback.
Continuous playback of two tapes
1
2
3
Load the tapes in tape deck 1 and 2.
PressÉon tape deck 2.
Press Å on tape deck 1, followed byÉ.
➜ Playback will begin from tape deck 2 and
continue with tape deck 1. It will stop at the end
of tape deck 1.
To interrupt playback
● Press Å.
2
Press 70 to open the tape
deck door.
● To resume playback, press Åagain.
3
Load the tape with the open
side downward and full spool to the left.
To stop playback
● Press 70.
4
Close the tape deck door.
21
pg 001-029/MAS100/37-Eng
21
5/9/02, 2:40 PM
8240 009 34231
Tape Operation / Recording
English
Preparation for recording
Rewinding / Fast forwarding
1
Stop playback, press à or á.
➜ The tape will stop automatically at the end of
rewinding or fast forwarding.
2
Press 70 to stop rewinding or fast forwarding.
Note:
– During rewinding or fast forwarding of a tape, it
is also possible to select another source (CD or
TUNER, for example).
General information on
recording
● For recording, use only tape of IEC type I
(normal tape).
● The recording level is set automatically,
regardless of the position of the Volume, DBB,
DSC and so forth.
● The tape is secured at both ends with leader
tape. At the beginning and end of the tape,
nothing will be recorded for six to seven
seconds.
● To prevent accidental recording, break out the
tab on the left shoulder of the tape side you
want to protect.
1
Load a recordable tape into tape deck 1 with full
spool to the left.
2
Prepare the source to be recorded.
CD 1/2/3 – load the disc(s).
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 2 with the full spool to the left.
When recording is in progress
➜ REC starts flashing.
● It is not possible to listen to another source.
● It is not possible to activate the timer function
during recording or tape dubbing.
One touch recording
1
Press CD 1/2/3 or TUNER to select the
source.
2
3
Start playback of the selected source.
Press ● on tape deck 1 to start recording.
To stop recording
● Press 70 on tape deck 1.
CD Synchronized start recording
1
Press CD 1/2/3 to select the disc.
● You can program the tracks in the order you
want them to be recorded (refer to “CD
Operation - Programming the disc tracks”).
2
IMPORTANT!
– Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
– Recording is possible only on tape deck 1.
Press ● on tape deck 1 to start recording.
➜ The disc will start playback automatically.
To stop recording
● Press 70 on tape deck 1, then press Ç to stop
disc playback.
Note:
– During CD synchronized start recording, do not
fast forward/rewind the tape in tape deck 2.
22
pg 001-029/MAS100/37-Eng
22
5/9/02, 2:40 PM
8240 009 34231
Dubbing tapes
1
Load the prerecorded tape in tape deck 2.
● Make sure both tapes have their full spool to the
left.
2
3
Notes:
– Dubbing of tapes is possible only from tape
deck 2 to tape deck 1.
– To ensure good dubbing, use tapes of the same
length.
Press Å on tape deck 1 and followed by ●.
PressÉon tape deck 2.
➜ Recording will start automatically.
● Dubbing of tapes is possible on one side of the
tape only. To continue recording on the reverse
side, at the end of side A, flip the tape to side B
and repeat the procedure.
To stop dubbing
● Press 70 on tape deck 1 and 2.
Maintenance
Cleaning the Cabinet
● Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.
Cleaning Discs
● When a disc becomes dirty,
clean it with a cleaning cloth.
Wipe the disc from the center
out.
● Do not use solvents such as
benzene, thinner, commercially
available cleaners, or antistatic spray intended for
analog records.
Cleaning the disc lens
● After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure good
playback quality, clean the disc lens with Philips
CD Lens Cleaner or any commercially available
cleaner. Follow the instructions supplied with
cleaner.
Cleaning the Heads and the Tape Paths
● To ensure good recording and playback quality,
clean the heads A and B, the capstan(s) C,
and pressure roller(s) D after every 50 hours
of tape operation.
● Use a cotton swab slightly moistened with
cleaning fluid or alcohol.
● You can also clean the heads by playing a
cleaning tape once.
Demagnetizing the heads
● Use a demagnetizing tape available at your
dealer.
23
pg 001-029/MAS100/37-Eng
23
5/9/02, 2:40 PM
8240 009 34231
English
Tape Operation / Recording
Clock/Timer
English
STANDBY-ON
2
FM•AM
TAPE 1•2
TUNER
CD 1
3 CD DIRECT PLAY
CD
CD 2
CD 3
SEARCH /
TUNING
PREV•PRESET
▲
DSC
DIGITAL SOUND
CONTROL
SEARCH /
TUNING
DYNAMIC
BASS BOOST
NEXT•PRESET
DEMO STOP
PROGRAM
CLOCK•TIMER
▲
OPEN•CLOSE
DISC
CHANGE
MASTER VOLUME
TAPE
DIM
Notes:
– The clock setting will be cancelled when the
power cord is disconnected or if a power failure
occurs.
– During clock setting, if no button is pressed
within 90 seconds, the system will exit clock setting
mode automatically.
View clock
The clock (if it is set) will be shown in standby
mode.
To view the clock in any source mode
(CD or TUNER for example)
● Press CLOCK•TIMER.
➜ The clock is displayed for a few seconds.
➜ If the clock has not been set, "--:--" is
displayed.
Timer setting
The system can switch on to CD or TUNER
mode automatically at a preset time, serving as
an alarm to wake you up.
Clock setting
The clock can be set in either 12-hour or
24-hour mode ("12:00 AM" or "00:00", for
example)
1
In standby or view clock mode, press
CLOCK•TIMER once. In other source mode,
press CLOCK•TIMER twice.
2
Press PROGRAM repeatedly to select clock
mode.
➜ "12:00 AM" or "00:00" starts flashing.
3
Press à or á on the system repeatedly to set
the hour.
4
Press í or ë on the system repeatedly to set
the minute.
5
Press CLOCK•TIMER again to store the
setting.
➜ The clock starts working.
IMPORTANT!
– Before setting the timer, ensure that the
clock is set correctly.
– The timer will always be switched on
after it has been set.
– The timer will not start if a recording is in
progress.
– The volume of the timer controlled
playback will increase gradually from the
minimum level to the last tuned volume
level.
1
Press and hold CLOCK•TIMER for more than
two seconds to select timer mode.
➜ "12:00 AM" or "00:00" or the last timer
setting starts flashing.
➜ starts flashing.
To exit without storing the setting
● Press Çon the system.
24
pg 001-029/MAS100/37-Eng
24
5/9/02, 2:41 PM
8240 009 34231
2
Press CD 1/2/3, TUNER or PROGRAM to
select the desired source.
➜ “CD1 [or 2, 3] XX:XX" indicates the CD
mode is selected.
➜ “TU XX:XX” indicates the Tuner mode is
selected.
➜ “PROG XX:XX" indicates the CD program
mode is selected.
● Before setting timer, make sure the music source
has been prepared.
CD 1/2/3 – Load the disc(s). To start from a
specific track, make a program (refer to “CD
Operation - Programming the disc tracks”).
TUNER – tune to the desired radio station.
3
Press à or á on the system repeatedly to set
the hour for the timer to start.
4
Press í or ë on the system repeatedly to set
the minute for the timer to start.
Activating the timer (for the same preset
time and source)
1
Press and hold CLOCK•TIMER for more than
two seconds.
2
Press CLOCK•TIMER again to store.
➜ The last set timer information is displayed for
a few seconds and is shown.
Sleep timer setting
The sleep timer enables the system to switch to
standby mode automatically at a preset time.
1
Press SLEEP on the remote control repeatedly
to select a preset time.
➜ The selections are as follows (time in
minutes):
15 ™ 30 ™ 45 ™ 60 ™ 90 ™ 120 ™
OFF ™ 15 …
➜ "SLEEP XX" or "OFF" is displayed. "XX" is the
time in minutes.
2
When you reach the desired length of time, stop
pressing the SLEEP button.
is shown, except for "OFF" mode.
➜
➜ The sleep timer is now set. Before the system
switches to standby mode, a countdown of 10
seconds is displayed.
"SLEEP 10" ™ "SLEEP 9".... ™ "SLEEP 1"
™ "SLEEP"
5
Press CLOCK•TIMER to store the timer.
➜ "TIMER ON" is displayed, followed by the set
timer "XX:XX" and the selected source.
➜ remains on the display.
● At the preset time, the selected sound source
will play.
To exit without storing the setting
● Press Çon the system.
Notes:
– When the preset time is reached and the
selected disc tray is empty, the next available disc
will be selected. If all the disc trays are not
available,Tuner will be selected automatically.
– During timer setting, if no button is pressed
within 90 seconds, the system will exit timer setting
mode automatically.
Deactivating the timer
1
Press and hold CLOCK•TIMER for more than
two seconds.
2
Press Ç on the system to cancel the timer.
➜ "CANCEL" is displayed and the disappears.
To check the remaining length of time
after sleep timer is activated
● Press SLEEP once.
To change the preset sleep timer
● Press SLEEP again while the remaining sleep
timer is shown.
➜ The display will show the next sleep timer
options.
To deactivate the sleep timer
● Press SLEEP repeatedly until "OFF" is displayed,
or press the STANDBY ON button.
25
pg 001-029/MAS100/37-Eng
25
5/9/02, 2:41 PM
8240 009 34231
English
Clock/Timer
Specifications
English
AMPLIFIER
Output power ................................... 4 W total power
...................................................................... 2 x 2 W RMS(1)
Signal-to-noise ratio .......................... ≥ 67 dBA (IEC)
Frequency response .......................... 50 – 15000 Hz
Impedance loudspeakers ......................................... 8 Ω
Impedance headphones .................... 32 Ω -1000 Ω
(1) (8Ω, 60 Hz – 12.5 kHz, 10% THD)
CD PLAYER
Number of programmable tracks ......................... 40
Frequency range .................................. 20 – 20000 Hz
Signal-to-noise ratio ....................................... ≥ 80 dBA
Channel separation .......................... ≥ 60 dB (1 kHz)
Total harmonic distortion ........................... < 0.003%
GENERAL INFORMATION
Material .............................................................. Polystyrene
AC Power ................................................... 120 V / 60 Hz
Power Consumption
Active ......................................................................... 24 W
Standby .................................................................. ≤ 11 W
Dimensions (w x h x d)
.......................................... 13.00 x 12.20 x 10.43 (inch)
...................................................... 330 x 310 x 265 (mm)
Weight (without speakers) .................. 9.74 pounds
............................................................................................ 4.4 kg
Subject to modification
TUNER
FM wave range ................................... 87.5 – 108 MHz
AM wave range .................................. 530 – 1700 kHz
Number of presets ........................................................ 40
Antenna
FM ................................................... 300 Ω dipole wire
AM ............................................................ Loop antenna
TAPE DECK
Frequency response
Normal tape (type I) ...... 80 – 10000 Hz (8 dB)
Signal-to-noise ratio
Normal tape (type I) ................................ ≥ 48 dBA
Wow and flutter ....................................... ≤ 0.35% DIN
SPEAKERS
System .................................... double port bass reflex
Impedance ........................................................................ 8 Ω
Woofer .................................................... 1 x 4" full range
Dimensions (w x h x d)
........................................................ 7.2 x 12.2 x 6.5 (inch)
...................................................... 183 x 310 x 165 (mm)
Weight ..................................................... 3.4 pounds each
................................................................................ 1.6 kg each
26
pg 001-029/MAS100/37-Eng
26
5/9/02, 2:41 PM
8240 009 34231
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you
are unable to solve a problem by following these hints, consult your dealer or service center.
Problem
Solution
CD OPERATION
“NO DISC” is displayed.
“DISC NOT FINALIZED” is displayed.
RADIO RECEPTION
Radio reception is poor.
– Insert a disc.
– Check if the disc is inserted upside down.
– Wait until the moisture condensation at the lens
has cleared.
– Replace or clean the disc, see “Maintenance”.
– Use a finalized CD-RW or CD-R.
– If the signal is too weak, adjust the antenna or
connect an external antenna for better reception.
– Increase the distance between the Mini HiFi
System and your TV or VCR.
TAPE OPERATION/RECORDING
Recording or playback cannot be made.
– Clean deck parts, see “Maintenance”.
– Use only NORMAL (IEC I) tape.
– Apply a piece of adhesive tape over the missing
tab space.
27
pg 001-029/MAS100/37-Eng
27
5/9/02, 2:41 PM
8240 009 34231
English
Troubleshooting
Troubleshooting
English
GENERAL
The system does not react when buttons
are pressed.
Sound cannot be heard or is of poor
quality.
The left and right sound outputs are
reversed.
The remote control does not function
properly.
The timer is not working.
The Clock/Timer setting is erased.
The system displays features
automatically.
– Remove and reconnect the AC power plug and
switch on the system again.
– Adjust the volume.
– Disconnect the headphones.
– Check that the speakers are connected correctly.
– Check if the stripped speaker wire is clamped.
– Check the speaker connections and location.
– Select the source (CD 1/2/3 or TUNER, for
example) before pressing the function button
(É,í,ë).
– Reduce the distance between the remote
control and the system.
– Insert the batteries with their polarities
(+/– signs) aligned as indicated.
– Replace the batteries.
– Point the remote control directly towards the IR
sensor.
– Set the clock correctly.
– Press and hold CLOCK•TIMER to switch on the
timer.
– If recording or tapes dubbing is in progress, stop
recording.
– Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
– Press and hold Çon the system to switch off
the demonstration.
28
pg 001-029/MAS100/37-Eng
28
5/9/02, 2:41 PM
8240 009 34231
LIMITED WARRANTY
MAGNAVOX AUDIO SYSTEM
One Year Free Exchange
This product must be carried in for an exchange.
WHO IS COVERED?
BEFORE REQUESTING EXCHANGE...
You must have proof of purchase to exchange the product. A sales
receipt or other document showing that you purchased the product is
considered proof of purchase. Attach it to this owner’s manual and
keep both nearby.
Please check your owner’s manual before requesting an exchange.
Adjustments of the controls discussed there may save you a trip.
WHAT IS COVERED?
Warranty coverage begins the day you buy your product. For one year
thereafter, a defective or inoperative product will be replaced with a
new, renewed, or comparable product at no charge to you. A replacement product is covered only for the original warranty period. When
the warranty on the original product expires, the warranty on the
replacement product also expires.
WHAT IS EXCLUDED?
Your warranty does not cover:
• labor charges for installation or setup of the product, adjustment of
customer controls on the product, and installation or repair of
antenna systems outside of the product.
• product repair and/or part replacement because of misuse, accident, unauthorized repair or other cause not within the control of
Magnavox.
• reception problems caused by signal conditions or cable or antenna
systems outside the unit.
• a product that requires modification or adaptation to enable it to
operate in any country other than the country for which it was
designed, manufactured, approved and/or authorized, or repair of
products damaged by these modifications.
• incidental or consequential damages resulting from the product.
(Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. This
includes, but is not limited to, prerecorded material, whether copyrighted or not copyrighted.)
• a product that is used for commercial or institutional purposes.
WHERE IS EXCHANGE AVAILABLE?
You may exchange the product in all countries where the product is
officially distributed by Magnavox. In countries where Magnavox does
not distribute the product, the local Magnavox service organization will
attempt to provide a replacement product (although there may be a
delay if the appropriate product is not readily available).
EXCHANGING A PRODUCT IN U.S.A.,
PUERTO RICO, OR U.S. VIRGIN ISLANDS...
Contact your dealer to arrange an exchange. Or, ship the product,
insured and freight prepaid, and with proof of purchase enclosed, to
the address listed below.
Small Product Service Center
Magnavox
1001 Snapps Ferry Road
Plant 2, Building 6
Greeneville, TN 37743
(In U.S.A., Puerto Rico, and U.S. Virgin Islands, all implied warranties,
including implied warranties of merchantability and fitness for a particular purpose, are limited in duration to the duration of this express
warranty. But, because some states do not allow limitations on how
long an implied warranty may last, this limitation may not apply to
you.)
EXCHANGING A PRODUCT IN CANADA...
Please contact Magnavox at:
1-800-661-6162 (French Speaking)
1-800-705-2000 (English Speaking or Spanish Speaking)
(In Canada, this warranty is given in lieu of all other warranties. No
other warranties are expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose. Magnavox
is not liable under any circumstances for any direct, indirect, special,
incidental or consequential damages, howsoever incurred, even if notified of the possibility of such damages.)
REMEMBER...
Please record below the model and serial numbers found on the product. Also, please fill out and mail your warranty registration card
promptly. It will be easier for us to notify you if necessary.
MODEL # ___________________________________________
SERIAL # ___________________________________________
This warranty gives you specific legal rights. You may have other rights which
vary from state/province to state/province.
Magnavox, P.O. Box 520890, Miami, FL 33152
(402) 536-4171
EL6519E001 / 3-02
29
pg 001-029/MAS100/37-Eng
29
5/9/02, 2:41 PM
8240 009 34231
Download PDF