datasheet: pdf
Commercial/Industrial Surge Suppression
Panelmount Surge Protection Device 600/347V
160KA w/Surge Counter
High quality TVSS for datacenters, industrial
facilities and commercial buildings.
Includes: Front panel sticker(s), User Manual
Standard Lead Time: Usually Ships within 3
PML4S Features
NEMA 1 enclosure
Replaceable surge
protection modules
Protection Working
Audible Alarms
Lightning and Surge
Remote monitoring
Low Z bussbars
Patented thermal
overload protection
Surge event counter
Meets the requirements of a NEMA 1 enclosure for indoor applications.
Allows you to use any combination of APC rack-mount surge protection
modules and replace them quickly and conveniently if needed.
SurgeArrest will warn you if its circuitry has been damaged by heavy strike
or power line surge and it is unable to provide 100% protection. If still under
warranty, APC will then replace your damaged SurgeArrest free of charge.
Provides notification of changing utility power and UPS conditions.
To prevent damage to your equipment from power surges and spikes.
Commercial/Industrial Surge Suppression Features & Benefits
Noise Filtering
Maximum surge
current ratings
120kA SurgeArrest models contain EMI/RFI filtering to reduce line noise
that can cause data loss and keyboard errors. 40kA and 80kA units do not
contain noise filtering components, so they can be used with powerline
networking systems (X10, HomePlug, PLC, etc.).
40kA, 80kA and 120kA per phase maximum surge current ratings, for all
your residential, commercial and individual equipment protection needs.
Catastrophic Event
SurgeArrest Panelmount SPDs are equipped with fuses and thermal
disconnects that react quickly to protect against dangerous high and low
current wiring faults as well as other catastrophic surge events. These
panelmount SPDs are passive, and continue to allow power through to your
home or building if any of the surge components are damaged.
Status Indicator LED's LED status indicators for each phase and an audible alarm provide immediate
failure notification when suppression circuitry has been damaged by a heavy
strike or surge.
Physical Size
For easy installation inside your circuit breaker panel (40kA model) or next
to your power distribution panels. (80kA and 120 kA models)
Chase nipple
Allows for mounting of the PM2X units rigidly to the side of your
Nominal Input Voltage
600V 3PH
Input Frequency
50/60 Hz
Input Connections
Hard Wire 5-wire (3PH + N + G)
Surge Protection and Filtering
Surge energy rating
12000 Joules
EMI/RFI Noise rejection (100 kHz 50 dB
to 10 mHz)
Peak Current Normal Mode
160 (/PH) kAmps
Peak Current Common Mode
160 kAmps
NM Surge Response Time (ns)
1 ns
Net Weight
10.45 KG
Maximum Height
305.00 mm
Maximum Width
305.00 mm
Maximum Depth
159.00 mm
Shipping Weight
11.82 KG
Shipping Height
445.00 mm
Shipping Width
406.00 mm
Shipping Depth
260.00 mm
SCC Codes
Operating Environment
-40 - 60 °C
Operating Relative Humidity
Operating Elevation
0-3000 meters
Storage Temperature
-55 - 60 °C
Storage Relative Humidity
Storage Elevation
0-3000 meters
Regulatory Approvals
UL 1283,UL 1449,cUL Listed
Standard Warranty
5 year repair or replace
UL 1449 TVSS Rating
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF