CZ302
Bluetooth® CD/USB/MP3/WMA RECEIVER
LECTEUR Bluetooth® CD/USB/MP3/WMA
RECEPTOR Bluetooth® CD/USB/MP3/WMA
English
Contents
Thank you for purchasing this Clarion product.
• Please fully read this owner’s manual before operating this equipment.
• Check the contents of the enclosed warranty card and store it in a safe place with this manual.
1. FEATURES........................................................................................................................ 2
2. PRECAUTIONS................................................................................................................. 2
Front Panel / Generalities............................................................................................... 3
USB Port......................................................................................................................... 3
Remove the DCP............................................................................................................ 3
Attach the DCP............................................................................................................... 3
Storing the DCP in the DCP Case.................................................................................. 3
3. CONTROLS....................................................................................................................... 4
Operational Panel........................................................................................................... 4
Names of Buttons............................................................................................................ 4
Notes of remote control using......................................................................................... 4
Remote Control (RCX001).............................................................................................. 5
4. CAUTIONS ON HANDLING.............................................................................................. 5
Handling Discs................................................................................................................ 5
5. OPERATIONS.................................................................................................................... 6
Basic Operations............................................................................................................. 6
System Setup.................................................................................................................. 6
Audio Setup..................................................................................................................... 7
Radio Operations............................................................................................................ 7
SiriusXM Satallite Radio Operations............................................................................... 8
CD/MP3/WMA Operations.............................................................................................. 9
USB Operations............................................................................................................ 10
iPod & iPhone Operations............................................................................................. 11
Bluetooth Operations.................................................................................................... 12
AUX Operations............................................................................................................ 13
6. TROUBLE SHOOTING.................................................................................................... 14
7. ERROR DISPLAYS......................................................................................................... 15
8. SPECIFICATIONS........................................................................................................... 15
9. INSTALLATION / WIRE CONNECTION GUIDE............................................................. 16
1
CZ302
2. PRECAUTIONS
Compatible with iPod® / iPhone® with Pandora® internet radio App
Built-in Parrot Bluetooth® Handsfree (HFP) and Audio Streaming (A2DP & AVRCP)
SiriusXM-Ready™ with iTunes® Tagging
For your safety, the driver should not operate the controls while driving.
Also, while driving, keep the volume to a level at which external sounds can be heard.
WARNING
1.When the interior of the car is extremely
cold and the player is used soon after
switching on the heater, moisture may
form on the disc or the optical parts of the
player and proper playback may not be
possible. If moisture forms on the disc,
wipe it off with a soft cloth. If moisture
forms on the optical parts of the player,
do not use the player for about one hour.
The condensation will disappear naturally
allowing normal operation.
2. Driving on extremely bumpy or rough
roads can cause the disc to skip during
playback.
Expanding Systems
Expanding audio features
3.This unit uses precision parts and
components for its operation. In the
event that trouble arises, never open the
case, disassemble the unit, or lubricate
the rotating parts. Contact your Clarion
dealer or service center.
4 Channel Amplifier
iPod/iPhone
(Connect via CCA-748)
USB Memory
(Connect via CCA-755)
Portable Player
(Connect via AUX IN Jack)
Bluetooth®
cellular phone
SiriusXM Connect™
Vehicle Tuner
Note:
• The items listed outside of the frames are the commercial products generally sold.
• CCA-748 and CCA-755: Sold by separately.
English
1. FEATURES
4.This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of the
FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and
can radiate radio frequency energy and,
if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio reception,
which can be determined by turning
the equipment off and on, the user is
encouraged to consult the dealer or an
experienced radio technician for help.
5.“Made for iPod,” and “Made for iPhone”
mean that an electronic accessory has
been designed to connect specifically to
iPod, or iPhone, respectively, and has
been certified by the developer to meet
Apple performance standards.
Apple is not responsible for the operation
of this device or its compliance with safety
and regulatory standards. Please note
that the use of this accessory with iPod or
iPhone may affect wireless performance.
iPhone,iPod and iTunes are trademarks
of Apple Inc., registered in the U.S. and
other countries.
6.P andora, the Pandora logo and other
Pandora marks are trademarks or
registered trademarks of Pandora Media,
Inc. or its subsidiaries worldwide.
“If you have any issues with the Pandora application on your mobile phone, please
direct them to pandora-support@pandora.
com.”
7.The Bluetooth word mark and logos are
owned by the Bluetooth SIG, Inc. and any
use of such marks by Clarion Co.,Ltd. is
under license.
Other trademarks and trade names are
those of their respective owners.
8.SiriusXM and all related marks and logos
are trademarks of SiriusXM Radio, Inc. All
rights reserved.
CZ302
2
English
Remove the DCP
Cleaning the body
CZ302
530-1710kHz
87.9-107.9MHz
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2)THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
THIS DEVICE COMPLIES WITH DHHS RULES 21 CFR CHAPTER I
SUBCHAPTER J APPLICABLE AT DATE OF MANUFACTURE.
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
CLARION CO.,LTD.
7-2,SHINTOSHIN,CHUO-KU,SAITAMA-SHI,SAITAMA-KEN,JAPAN
MANUFACTURED:
URF
FCC ID: AX2CZ302
QDID NO.: B017789
TX-1098B-A
CHINA
PN:127070009678
• Use a soft, dry cloth and gently wipe off
any dirt or dust.
• For tough dirt, apply some neutral
detergent diluted in water to a soft cloth,
wipe off the dirt gently, then wipe again
with a dry cloth.
• Do not use benzene, thinner, car cleaner,
etc., as these substances may damage
the body or cause the paint to peel. Also,
leaving rubber or plastic products in
contact with the body for long periods of
time may cause stains.
The control panel can be detached to prevent
theft. When detaching the control panel, keep
it in the safety place and prevent scratches.
We recommend taking the DCP
(DETACHABLE CONTROL PANEL) with you
when leaving the car.
1.Press the [SRC / ] button (1 sec.) to turn
off the power.
2.Deeply push in [OPEN] button to unlock
the DCP.
3.H old the side popped out, remove the
DCP.
Attach the DCP
USB Port
INFORMATION FOR USERS:
Changes or modifications to this product
unapproved by the manufacturer will void the
warranty and will violate FCC approval.
Front Panel / Generalities
For a longer service life, be sure to read the
following cautions.
• Do not allow any liquids on the unit from
drinks, umbrellas, etc. Doing so may
damage the internal circuitry.
• Do not disassemble or modify the unit in
any way. Doing so may result in damage.
• Do not let cigarettes burn the display.
Doing so may damage or deform the
body.
• If a problem should occur, have the unit
inspected at your store of purchase.
• The remote control unit may not work if
the remote control sensor is exposed to
direct sunlight.
3
CZ302
• The USB memory stick may stick out when inserted,so it may cause danger during driving. When connect USB memory stick to the main unit, please use a USB extension cable(CCA-755).
•T h e U S B m e m o r y s t i c k s m u s t b e
recognized as “USB mass storage class“
to work properly. Some models may not
operate correctly.
When the memorized data is lost or
damaged by any chance, Clarion shall
not be liable for any damage.
When using an USB memory stick, we
recommend that you backup your data
stored on it before using a personal
computer etc.
•Data files may be broken when using USB
memory sticks in the following situation:
When disconnecting the USB memory
stick or turning the power off during
reading data.
When affected by static electricity or
electric noise.
Connect/disconnect the USB memory stick
when it is not accessed.
•C onnecting with the computer is not
covered.
1.Hold the DCP and ensure that the panel
faces towards you. Set the right side of the
DCP into the DCP bracket.
2.Press the left side of the DCP until it locks.
Storing the DCP in the DCP Case
Hold the DCP, as shown in the figure below,
and put it into the supplied DCP case.
DCP
DCP case
Note:
If the DCP is dirty, wipe off the dirt with a soft,
dry cloth only.
CAUTION
• The DCP can easily be damaged by shocks.
After removing it, be carefully not to drop it or
subject it to strong shocks.
• Once the [OPEN] button is pressed and DCP
is unlocked, car vibrations can cause the DCP
to fall.
• The connector for the main unit and DCP
is extremely important. Be careful not to
damage it by pressing on it with fingernails,
screwdrivers, etc.
Operational Panel
[MIC]
[ SRC /
[BAND /
]
[
] [MENU /
/
]
[PS/AS]
]
[OPEN]
[VOLUME]
[DISP]
Disc Slot
[1~6]
[
] USB Connector
[ISR] AUX Jack
Names of Buttons
[ SRC / ] Button
• Power / Toggle the audio source
[BAND / ] Button
•RADIO mode – Select tuner band
•BT mode – Dial/Answer / Transfer call / Redial
(long press)
•SiriusXM mode – Select tuner band/Select
category (long press)
•PANDORA mode – skip song
[MENU / ] Button
• MP3/WMA mode – Search function.
• CD mode – No function.
• RADIO mode – No function.
• AUX mode – No function.
• USB mode – Search function
• iPod mode – iPod menu
• PANDORA mode – Station select
• BT mode – Terminate call
•SiriusXM mode – Replay mode / Direct select,
Alert list, MyMusic list (long press)
[ ] Button
• Press
to eject disc.
[ISR] Button
•Recall ISR station stored in memory and
store current station in ISR memory (long
press)
•iTunes Tagging (When connected with
SiriusXM Vehicle Tuner and displayed
”TAG” on display at SiriusXM - mode.)
English
Names of Buttons
3. CONTROLS
[DISP] Button
• Display switch
• System setup (long press)
[ MIC ] Hole
• Internal microphone
[1~6] Buttons
• [1] Button:Scan play / Preset station 1 /
Create new station(PANDORA
mode)
• [2] Button: Repeat play / Preset station 2.
• [3] Button: Random play / Preset station 3.
• [4] Button:Play / Pause / Top play (long
press) / Preset station 4.
• [5] Button:Previous folder / Preset station
5.
10 tracks down (long press
Thumbs down(PANDORA
mode)
• [6] Button:Next folder / Preset station 6.
10 tracks up (long press) /
Thumbs up (PANDORA mode)
,
] Buttons
[
•Previous / next track
•Search (long press)
•PANDORA mode – Station up/down
[Open] Button
•Unlock the front panel.
[PS / AS] Button
•Scan play / Preset scan
•Auto memory store (long press)
•SiriusXM mode – Channel scan (in current
category) /Preset scan (long press)
[ ] Button
• Sound effect setting
[VOLUME] Knob
• Adjust volume level / Confirm (press)
• PANDORA mode – Bookmark song / Artist(long press)
• SiriusXM mode – Add Artist Alert / Add Song
Alert (long press)
Notes of remote control using
1.Aim the remote control at the remote sensor
on the unit.
2.Remove the battery from the remote control
or insert a battery insulator if the battery has
not been used for a month or longer.
3.D O NOT store the remote control under
direct sunlight or in high temperature
environment, or it may not function properly.
4.U s e “ b u t t o n s h a p e d ” l i t h i u m b a t t e r y
“CR2025” (3V) only.
5.D O NOT subject battery to recharge,
disassemble, heat or dispose in fire or
water.
6.I nsert the battery in proper direction
according to the (+) and (-) polarities.
7.Store the battery in a place where children
cannot reach to avoid the risk of accident.
Inserting the Battery
1.Slide remote control unit’s rear cover in
the direction shown.
2.I nsert battery (CR2025) into insertion
guides with printed side (+) up.
3.Press battery into compartment as shown.
4.Replace and slide cover until it clicks into
place.
Insertion guide
CZ302
4
English
Remote Control (RCX001)
4. CAUTIONS ON HANDLING
[SRC / ] Button
• Toggle the audio source
•Power on / Power off (long press)
[RDM] Button
• Random play
• PANDORA mode – Thumbs up
,
] Buttons
[
• Preset station up/down
• Previous / next track
•Search (long press)
•PANDORA mode – Station up/down
[RPT] Button
• Repeat play
•PANDORA mode – Bookmark song /
Artist (long press)
[SCN/PS/AS] Button
•Scan play / Preset scan
•Auto memory store (long press)
•PANDORA mode – Thumbs down
•SiriusXM mode– Channel scan (in current
category)/ Preset scan (long press)
[BAND/TOP] Button
•CD/MP3/WMA/USB mode – Top play (long
press)
•RADIO mode – Select tuner band
•PANDORA mode – Skip song
•SiriusXM mode – Select tuner band, quit
Replay(Replay mode) / Select category(long
press)
[ , ] Buttons
• Volume up / down
Handling Discs
[MUTE] Button
• Mute the volume
[ISR] Button
•Recall ISR station stored in memory and
store current station in ISR memory (long
press)
•iTunes Tagging (When connected with
SiriusXM Vehicle Tuner and displayed ”TAG”
on display at SiriusXM - mode.)
[DISP] Button
• Display switch
5
CZ302
Storage
• New discs may have some roughness
around the edges. If such discs are used,
the player may not work or the sound may
skip. Use a ball-point pen or the like to
remove any roughness from the edge of
the disc.
• Do not expose discs to direct sunlight or
any heat source.
• Do not expose discs to excess humidity or
dust.
• Do not expose discs to direct heat from
heaters.
Ball-point pen
Roughness
[SRC /
[
,
]
[BAND/TOP]
[
,
]
[
]
]
[MUTE]
[SCN/
PS/AS]
[ISR]
[DISP]
[RDM ]
[RPT ]
[
] Button
• Play / Pause
• SirusXM mode – Replay mode
Handling
Cleaning
• To remove fingermarks and dust, use a soft
cloth and wipe in a straight line from the
center of the disc to the circumference.
• Do not use any solvents, such as
commercially available cleaners, anti-static
spray, or thinner to clean discs.
• After using special disc cleaner, let the disc
dry off well before playing it.
On Discs
• Never stick labels on the surface of the disc
or mark the surface with a pencil or pen.
• Never play a disc with any cellophane tape
or other glue on it or with peeling off marks.
If you try to play such a disc, you may not
be able to get it back out of the player or it
may damage the player.
• Do not use discs that have large scratches,
are misshapen, cracked, etc.
Use of such discs may cause misoperation
or damage.
• To remove a disc from its storage case,
press down on the center of the case and
lift the disc out, holding it carefully by the
edges.
• Do not use commercially available disc
protection sheets or discs equipped with
stabilizers, etc. These may damage the
disc or cause breakdown of the internal
mechanism.
• Never turn off the power and remove the
unit from the car with a disc loaded.
CAUTION
For your safety, the driver should not insert
or eject a disc while driving.
System Setup
In any mode, press and hold [DISP] button to
] or [
]
enter system setup. Press [
button to select options, rotate the [VOLUME]
knob to adjust.
Basic Operations
Note:
•Refer to the diagrams in “3. CONTROLS”
when reading this chapter.
CAUTION
Volume adjustment
Rotate the [VOLUME] knob on the front
panel or press the [ ] or [ ] button on the
remote control.
The adjustable range of volume is 0 to 40.
CLOCK
Press the [VOLUME] knob to enter clock
setting mode, rotate the [VOLUME] knob to
] or [
] button to
set clock, press [
select hour or minute, press and hold the
[VOLUME] knob to confirm.
When the unit is turned on, starting and
stopping the engine with its volume
raised to the maximum level may harm
your hearing.
Be careful about adjusting the volume.
While driving, keep the volume level at
which external sounds can still be heard.
Power on / off
Playing source selection
Notes:
Press [SRC / ] button on the front panel or
remote control repeatedly to choose desired
playing source.
AUX SENS (AUX mode)
Rotate the [VOLUME] knob to choose AUX
Input sensitivity LOW, MID or HIGH at AUX
mode.
Note:
PARENTAL PASSWORD (SiriusXM mode)
Change parental password. Original code is
“0000”
• Start the engine before using this unit.
• Be careful about using this unit for a long
time without running the engine. If you
drain the car’s battery too far, you may not
be able to start the engine and this can
reduce the service life of the battery.
1. Start the engine. The power button / knob
illumination on the unit will light up.
Engine ON
position
2. Press the [SRC / ] button on the front
panel or the remote control to turn on the
power under standby mode. The unit goes
back to the last status after power on.
3. Press and hold the [SRC / ] button on
the front panel or the remote control to
turn off the power.
Mute
CAUTION
Playing source selection means selecting
which mode, such as DISC mode, RADIO
mode and AUX mode.
Display system time
Press the [DISP] button on the front panel or
[DISP] button on the remote control to switch
the display information from clock, station
information (radio mode), or track information
(CD mode).
DX/LO (RADIO mode)
Rotate the [VOLUME] knob to choose radio
local or distant at RADIO mode.
• LO: Only stations with strong signal can
be received.
• DX: Stations with strong and weak signals
can be received.
LOCK CH (SiriusXM mode)
Lock the current channel
UNLOCK CH (SiriusXM mode)
Unlock current locked channel.
UNLOCK ALL CH (SiriusXM mode)
Unlock all parental locked channels.
ALERT: ON/OFF (SiriusXM mode)
Activate interruption by Artist and Song alert
DELETE ALL ALERT (SiriusXM mode)
Delete saved alert items for artist and song.
RESET
Note:
* When the [RESET] button is pressed,
preset radio stations, titles, etc. stored in
memory are cleared.
Press the [MUTE] button on the remote
control to mute the volume from the unit.
Note:
Doing the operation above again or adjusting
volume will release muting.
RESET
SELECT (BT mode)
This ”SELECT” menu is intended to
automatically paired by selecting a mobile
phone was stored.
This unit can store three mobile phones. The
mobile phone will be stored in paired order
to the unit. The mobile phone can be stored
up to three. The fourth mobile phone can not
be stored. If you want to store a fourth mobile
phone, please delete unwanted mobile phone
from ”DELETE” menu.
1. Rotate the [VOLUME] knob to choose the
pair mobile phone name from the pairing
list.
2. Press and hold the [VOLUME] knob to
confirm.
DELETE (BT mode)
1. R otate the [VOLUME] knob to choose
the paired mobile phone name from the
pairing list.
2. Press and hold the [VOLUME] knob to
confirm.
English
5. OPERATIONS
DISCON (BT mode)
Disconnect currently connected mobile
phone.
1. R otate the [VOLUME] knob, mobile
phone displays are currently connected.
2. Press and hold the [VOLUME] knob to
disconnect.
MIC SEL (BT mode)
Rotate the [VOLUME] knob to choose
Microphone EXTERNAL or INTERNAL.
MIC GAIN (BT mode)
Rotate the [VOLUME] knob to choose Mic
gain: -5,-4,-3,-2,-1,0,1, 2, 3, 4, 5.
You can change the gain of MIC when a
telephone partner cannot hear your voice.
TONE SEL (BT mode)
You can get mobile phone ring tone from the
speaker.
Rotate the [VOLUME] knob to choose
AUTO or INTERNAL.
• AUTO:
Mobile phone ring tone from the speaker.
• INTERNAL:
The unit original ring tone from the speaker.
AUTO ANS (BT mode)
To answer incoming calls automatically.
Rotate the [VOLUME] knob to choose
AUTO ANS ON or OFF.
AUTO CON: ON/OFF (BT mode)
Automatically connects the mobile phone
was last connected.
Rotate the [VOLUME] knob to choose
AUTO CON ON or OFF.
PIN CODE
Rotate and press the [VOLUME] knob
to choose a 4-digit password. Press the
[VOLUME] knob more than 1 seconds to
confirm.
The PIN CODE default setting is “ 0000 “.
CZ302
6
English
Radio Operations
System Setup
SCRN SVR: ON/OFF
Rotate the [VOLUME] knob to choose SCRN
SVR (screen saver) ON or OFF.
REAR/S-W
Rotate the [VOLUME] knob to choose
REAR or S-WOOFER (SUB-WOOFER).
SCROLL: ON/OFF
For track information that is longer than the
display panel:
When SCOLL is ON, the LCD will scroll the
ID3 TAG information across the display, e.g.:
TRACK->FOLDER->FILE->ALBUM->TITLE>ARTIST->TRACK->...
When SCROLL is OFF, the LCD will display
one of the ID3 TAG information, the default
is TRACK, but user can adjust it to other ID3
TAG information by press [DISP] button.
SW PHASE
Rotate the [VOLUME] knob to choose
SUBWOOFER phase REVERSE or
NORMAL.
S-CTRL (IPOD mode) : ON/OFF
Rotate the [VOLUME] knob to choose
S-CTRL(Simple control) ON or OFF.
* Refer to P11.
PANDORA: ON/OFF
Select OFF if the Pandora application has not
been installed on your iPod touch or iPhone.
DIMMER: ON/OFF
Rotate the [VOLUME] knob to choose
DIMMER ON or OFF.
• ON: LCD dimmer is active when small light
of vehicle is turned ON.
• OFF: LCD always maximum brightness
regardless of the vehicle small light.
TEL-SW
Rotate the [VOLUME] knob to choose
MUTE, ON or OFF.
• MUTE:
The sound from this unit is muted during
telephone calls.
• OFF:
This unit continues normal operation even
when the cellular phone is used.
• ON:
You can listen to your telephone calls from
the speakers connected to this unit.
*When listening to your calls on your car
speakers, you can adjust the volume by
turning the [VOLUME] knob.
BEEP: ON/OFF
Rotate the [VOLUME] knob to choose
button beep sound ON or OFF.
12/24H
Rotate the [VOLUME] knob to choose time
format: 12 or 24 hours.
Rotate the [VOLUME] knob to changes
CUSTOM, and press the [VOLUME] knob,
the press [
] or [
] button to select
it including: BAS-G -> BAS-F -> BAS-Q ->
MID-G -> MID-F -> MID-Q -> TRE-G -> TRE-F,
rotate the [VOLUME] knob to select a value.
BAS-G / MID-G / TRE-G: (-7)- (+7)
BAS-F: 50/100/200
BAS-Q: 0.7/1/1.4/2
MID-F: 500/1K/2K
MID-Q: 0.7/1/1.4/2
7
CZ302
Selecting the radio band
Press the [BAND / ] button on the panel
or on the remote control to select one radio
band among FM1, FM2, FM3, AM.
Manual tuning
During manual tuning, the frequency will be
changed in steps.
] or [
] button on the panel
Press the [
to tune in a higher / lower station.
] or [
] button on the
Press the [
remote control to select preset stations.
Auto tuning
Press and hold the [
] or [
] button
to seek a higher / lower station.
To stop searching, repeat the operation
above or press other buttons having radio
functions.
TRE-F: 5k/10k/15k
TRE-Q 0.7/1/1.4/2
Press the [ ] button, then press [
] or
[
] button to select USER preset
including:
BALANCE -> FADER -> M-B EX -> LPF(low
pass filter) -> S-W VOL (Subwoofer
Volume), rotate the [VOLUME] knob to
select a value.
BALANCE:LEFT 1-7->CENTER->RIGHT
1-7
FADER:FRONT 1-7->CENTER->REAR 1-7
M-BEX: ON/OFF
LPF: THROUGH/60/90/120
HPF:THROUGH/60/90/120
SUBW VOL: (-6)-(+6)
To stop auto store, press other buttons
having radio functions.
Notes:
1. After auto store, the previous stored
stations will be overwritten.
2. The unit has 4 bands, such as FM1, FM2,
FM3 and AM. FM3 and AM can store
by AS function. Each band can store 6
stations, CZ302 can store 24 stations
in total.
Manual store
When one expected radio station has been
detected, press and hold number button 1-6
to store it in the memory.
Recall the stored stations
Press one numeric button among 1 to 6 on
the panel to select the corresponding stored
station.
Note:
Local seeking
When a station is received, searching stops
and the station is played.
When LOCAL seeking is ON, only those
radio stations with strong radio signal could
be received.
To select LOCAL function, press and hold
the [ DISP ] button on the front panel, then
] button repeatedly until LO or
press [
DX displays on the screen, and rotate the
[volume] knob to select Local or Distant
mode.
Preset scan
Preset scan receives the stations stored
in preset memory in order. This function is
useful when searching for a desired station
in memory.
Audio Setup
Press the [ ] button to enter sound effect
setting mode. First press shows current EQ.
Rotate the [VOLUME] knob to changes BEAT
EQ in this order:
OFF -> B-BOOST -> IMPACT -> EXCITE ->
CUSTOM
Select tuner as playing source
Press [SRC / ] button once or more to
enter RADIO mode.
1. Press the [PS/AS] button.
2.When a desired station is tuned in, press
the [PS/AS] button again to continue
receiving that station.
Note:
e careful not to press and hold the [PS/AS]
B
button for 1 second or longer, otherwise the
auto store function will begin and the unit
starts storing stations.
Auto store
Only stations with sufficient signal strength
will be detected and stored in the memory.
Press and hold the [PS/AS] button (1 sec.)
to start automatic station search.
Note:
The number of radio stations that can be
received will decrease after the local seeking
mode is ON.
SiriusXM Satallite Radio Operations
Displaying the Identification (ID) Code
3. Rotate [VOLUME] knob and select “NO”,
and press [VOLUME] knob to quit.
4. You can manage the stored Alert memory
setting. Press and hold [MENU /
] and
rotate [VOLUME] knob to select “ALERT
LIST”. Press [VOLUME] knob to display
stored alert items. Rotate and press
[VOLUME] knob to select desired alert
item. Then select “ON” to activate alert,
“OFF” to deactivate or “DELETE” to delete
this item. (press and hold [VOLUME] knob)
You can also activate and deactivate Alert
function in System Setup menu.
Before you listen to satellite radio, you must
subscribe to the service using the SiriusXM
Radio ID number.
1. Press [SRC / ] button to activate
SiriusXM-mode.
] or [
] to select channel “0”.
2. Press [
The unit displays Radio ID.
Notes:
1.The Radio ID is located on the bottom of
the SiriusXM Connect Vehicle Tuner.
2.Please note that the SiriusXM Radio ID
does not include the letters I, O, S or F.
3.Activate the SiriusXM Connect Vehicle
Tuner using one of the two methods below:
• Online: Go to “www.siriusxm.com/
activatenow” and choose ACTIVATE
RADIO.
• Phone: Call 1-800-XM-RADIO (1-800-9672346).
Storing Channel Presets
1. P ress [BAND / ] to select the desired
band you want to store the preset in.
There are 3 Satellite Radio Preset bands.
Each press of [BAND / ] changes the
band:
SXM1 -> SXM2 -> SXM3 -> SXM1
2.T une to the desired channel and then
press and hold one of the preset buttons (1
through 6), to store the channel.
3.Repeat the procedure to store up to 5 other
channels on to the same band.
Note:
•A total of 18 channels can be stored in the
preset memory, 6 channels for each band
(SXM1,SXM2 and SXM3).
Tuning Channels using Presets
1. P ress [BAND / ] to select the desired
band of Presets you wish to access.
2.Press the preset button (1 through 6) that
has your desired Satellite Radio channel
stored in memory.
Category Browsing
1. Press and hold [BAND / ] to activate the
Category Browsing mode.
2.R otate the [VOLUME] knob to select
desired category.
3.P ress [
] or [
] to select desired
channel within the selected Category. You
can see channel name, channel number,
artist, title or content by pressing [DISP].
4.P ress [VOLUME] to tune to selected
channel.
Note:
If no operation is perfprmed for 10 seconds,
the Category Browsing mode is canceled.
Preset scan
Preset scan receives the stations stored
in preset memory in order. This function is
useful when searching for a desired station
in memory.
1.Press and hold the [PS/AS] button.
2.When a desired station is tuned in, press
the [PS/AS] button again to continue
receiving that station.
Channel scan (in current category)
Channel scan receives the channel (in
current category) in order. This function is
useful when searching for a desired channel
in current category.
1.Press the [PS/AS] button.
2.When a desired channel is tuned in, press
the [PS/AS] button again to continue
receiving that channel.
Note:
•Be careful not to press and hold the
[PS/AS] button for 1 second or longer,
otherwise the preset scan function will
begin and the unit starts scaning presets.
Artist & Song Alerts
While listening to SiriusXM Satellite Radio,
you can be alerted when your favorite songs
or artists are playing on other channels. The
radio will display an Alert message when a
matching artist or song is found on another
channel. Then you can choose if you want to
tune to that favorite or you can ignore it and
stay on your current channel. Information
on setting up the Artist and Song alerts is
described below.
1. W hile listening to favorite song, press
[VOLUME] knob to add the artist or press
and hold [VOLUME] knob to add the song
to the “Artist & Song Alerts” list.
2. Rotate [VOLUME] knob and select “YES”,
and press [VOLUME] knob to store item.
Notes:
•You can store up to 50 items for Artist
& Song Alerts. “XU(sed)/YE(mpty)” is
displayed when the new item is stored. X
is the total number of song titles or artist
names stored in memory, and Y is the total
number memory locations still available for
storage.
•If either the artists or song title is not
available, “NO SONG” or “NO ARTIST”
will be displayed.
•If you try to store item when memory is
full, “MEMORY FULL” is displayed. If
you want to store another, please delete
existing alert item.
Receiving and Tuning to an Alert
Whenever a stored artist or song is playing
on another channel alert message, “ART
ALERT” or “SNG ALERT” appears on the
unit display.To tune to artist or song identified
by the alert, press [VOLUME] knob.
Notes:
•If no operation is performed for 5 seconds,
the unit returns to normal mode.
•Artist name and Song title which you have
stored and which are currently playing
will be displayed in category called “MY
MUSIC” in search mode.
My Music search
You can access the channel which is
broadcasting the contents in the activated
Alert list.
1. Press and hold [MENU /
], and rotate
[VOLUME] knob to select “MY MUSIC
LIST”.
2. Press [VOLUME] knob to display matched
songs which are currently broadcasted
3.Rotate [VOLUME] knob to select desired
song, and press [VOLUME] to tune to that
channel.
English
SiriusXM Satallite Radio Operations
Note:
•If there is no matched songs broadcasted, it
displays “MEM EMPTY”.
Replay function
The Replay feature allows you to pause,
rewind, and replay up to 30 minutes of live
SiriusXM Satellite Radio.
1.While listening to a SiriusXM channel, press
[MENU /
] to enter Replay mode. The
display will show“PAUSE” when entering
this mode.
2.Press [ ] to resume playback of the stored
audio from the point at which it was paused.
During playback,the SiriusXM Tuner will
continue to store the channel audio until you
exit the Replay mode.
During REPLAY playback:
].
•Fast rewind: Press and hold [
forward: Press and hold [
].
•Fast
•Returning
to the beginning of the current
song:
Press [
].(If you press [
] in the first
2 seconds of a song,you return to the
beginning of the previous song.)
• A dvancing to the beginning of the next
song: press [
].
3. Press [MENU / ]] to finish Replay mode.
Notes:
•If you continue to press the [
] button until
the end,the Replay mode is canceled, and
the unit will change to live SiriusXM radio
mode.
•I f you change channels while in Replay
mode, the unit will exit Replay mode to
live Satellite mode and clear the Replay
memory.
•R eplay mode is being kept when you
change the source other than SiriusXM
mode.
iTunes song tagging
With iTunes song tagging, you can tag songs
you hear while listening to SiriusXM Satellite
Radio. The tagging information is saved in your
CZ302
8
English
SiriusXM Satallite Radio Operations
radio until you connect your iPod or iPhone
and then the tagging information is transferred
to your iPod/iPhone. When your iPod/iPhone
is connected to iTunes, you will then be able
to preview and purchase the song that you
heard while listening to SiriusXM Satellite
Radio.
Information on using the iTunes song tagging
feature is described below.
1.In SiriusXM mode, press [DISP] button.
Each time you press this button, the
display changes as shown below.
Band/Channel number/channel name =>
Artist Name => Song Title=> Content Info
=> Category Name => Clock => Band/
Channel number/channel name
* If there is no text information,nothing will
be displayed.
1.A song may be tagged while listening to a
SiriusXM channel if the display shows the
“TAG” icon.
2.Press [ISR] button while the desired song
is playing.
3.When completed, “STORED TAG X OF
64” is displayed.
X means the number of tag stored.
Parental Lock / Unlock
The SiriusXM Parental Control feature allows
you to control access to channels that you
consider inappropriate for younger listener.
When enabled, the Parental Control feature
requires you to enter a password to tune to
the locked channels. Information on setting
up the password, setting up the channels
to be locked, and the method to access the
locked channels is described below.
1. For setting up the password, press and
hold [DISP] and press [
] to select
“PARENTAL PASSWORD”. Press
[VOLUME] knob to change password.
Enter old password, new password.
To enter code, rotate [VOLUME] knob
to decide number and [
] or [
] to
select digit. Each time you need to press
and hold [VOLUME] knob to confirm
password. (Original password is “0000”)
2. For setting up the channels to be locked,
press and hold [DISP] during tuning to
the desired channel, and select “LOCK
CH” and press [VOLUME] knob to start to
lock channel. You will be asked to input
password. Enter password and “LOCK”
will be displayed if it is successful.
3. For unlocking the locked channel, press
] to select
and hold [DISP], and press [
“UNLOCKCH”. Enter password and you
can unlock the channel.
4. For accessing the locked channels, select
channel by “DIRECT SELECT”.
P r e s s a n d h o l d [ M E N U /
] and
select “DIRECT SELECT” by pressing
[VOLUME] knob. Input desired locked
channel (need to input 3 digit) and input
password, then you can tune to that
locked channel.
Notes:
•During tagging, the iPod/iPhone takes priority to save the tag information.
If no iPod/iPhone is connected, the tag
information is saved to this unit.
•This unit can store up to 64 pieces of tag
information. When the memory of the unit
is full, “MEMORY FULL” may be displayed.
•When iPod/iPhone that doesn’t support the
tagging function is connected, “TRANSFER
FAIL” may be displayed.
•If there is stored tag information on the
unit, when an iPod/iPhone supporting the
tag function is connected, the stored tag
information will be transferred to iPod/
iPhone automatically.
•I f t a g i n f o r m a t i o n a l r e a d y e x i s t s ,
“ALREADY TAGGED” will be displayed
when you try to tag information again.
•Tagging may be canceled by changing the
frequency or station.
•If a song is tagged and the remaining
storage volume of the connected iPod/
iPhone is sufficient to hold the song’s tag
information, it will be saved on the iPod/
iPhone.
Changing the Display
Text information, such as the channel name,
artist name/feature, song/program title and
content is available with each SiriusXM
channel. The unit can display this text
information as explained below.
9
CZ302
CD/MP3/WMA Operations
This unit can playback MP3/WMA
files
Note:
• If you play a WMA file with active DRM
(Digital Rights Management), there will be
no audio.
To disable DRM
(Digital Rights Management)
When using Windows Media Player 9/10/11,
click on Tool -> Options -> Copy Music tab,
then under Copy settings, unclick the Check
box for copy project music. Then, reconstruct
files.
Personally constructed WMA files are used
at your own responsibility.
Precautions when creating MP3/
WMA file
Usable sampling rates and bit rates
1.MP3: Sampling rate 8 kHz-48 kHz, Bit rate
8 kbps-320 kbps / VBR
2.WMA: Bit rate 8 kbps-320 kbps
File extensions
1.A lways add a file extension “.MP3”,
“.WMA” to MP3, WMA file by using single
byte letters. If you add a file extension
other than specified or forget to add the
file extension, the file cannot be played.
2.Files without MP3/WMA data will not play.
The files will be played soundlessly if you
attempt to play files without MP3/WMA
data.
* When VBR files are played, the play time
display may differ the play location.
* When MP3/WMA files are played, a little
no sound part is caused between tunes.
Logical format (File system)
1.When writing MP3/WMA file on a CD-R
disc or CD-RW disc, please select
“ISO9660 level 1, 2 or Joliet” or Apple ISO
as the writing software format. Normal
play may not be possible if the disc is
recorded on another format.
2. T he folder name and file name can be
displayed as the title during MP3/WMA
play but the title must be within 32 single
byte alphabetical letters and numerals
(including an extension).
3. Do not affix a name to a file inside a folder
having the same name.
Folder structure
A disc with a folder having more than 8
hierarchical levels will be impossible.
Number of files or folders
1. U p to 999 files can be recognized per
folder.
Up to 3000 files can be played.
2. Tracks are played in the order that they
were recorded onto a disc. (Tracks
may not always be played in the order
displayed on the PC.)
3. S ome noise may occur depending on
the type of encoder software used while
recording.
Eject function
Just pressing the [
.
] button, ejects the disc
Notes:
•I f y o u f o r c e a C D i n t o b e f o r e a u t o
reloading, this can damage the CD.
•If a CD (12 cm) is left ejected for 15
seconds, the CD is automatically reloaded
(Auto reload).
Listening to a disc already loaded
in the unit
Press the [SRC / ] button to select the CD/
MP3/WMA mode.
When the unit enters the CD/MP3/WMA
mode, play starts automatically.
Loading a CD
Insert
a CD into the center of the CD
SLOT with label facing up. The CD plays
automatically after loading.
Notes:
•Never insert foreign objects into the CD
SLOT.
•If the CD is not inserted easily, there may
be another CD in the mechanism or the
unit may require service.
•Discs without the
or
mark and
CD-ROMs cannot be played by this unit.
•Some CD-R/CD-RW discs may not be
usable.
TEXT
CD/MP3/WMA Operations
Track-down
] button to move back to
1.Press the [
the beginning of the current track.
2.Press the [
] button twice to move
back to the beginning of the previous
track.
3.For MP3/WMA disc, press and hold the
[ 5 ] button (1 sec.) to move back to -10 tracks.
Fast-forward/Fast-reverse
Pausing play
1. Press the [ 4 ] button to pause play.
“PAUSE” appears in the display.
2.To resume CD play, press the [ 4 ] button
again.
Displaying CD titles
This unit can display title data for MP3/WMA
disc.
When SCROLL is OFF, each time you
press the [ DISP ] button to change the title
display.
MP3/WMA disc
Track -> Folder -> File title -> Album -> Title
-> Artist -> Track ...
Notes:
•If MP3/WMA disc has no ID3 TAG,, “NO
TITLE” appears in the display.
•Only ASCII characters can be displayed in
Tags.
Selecting a track
Track-up
1.Press the [
] button to move ahead to
the beginning of the next track.
2.Each time you press the [
] button, the
track advances ahead to the beginning of
the next track.
3.For MP3/WMA disc, press and hold the
[ 6 ] button (1 sec.) to move ahead to +10 tracks.
Fast-forward
] button .
Press and hold the [
Fast-reverse
Press and hold the [
] button .
*For MP3/WMA discs, it takes some time
until the start of searching and between
tracks. In addition, some errors may occur
in the play time.
Folder Select
This function allows you to select a folder
containing MP3/WMA files and start playing
from the first track in the folder.
1. Press the [ 5 ] or [ 6 ] button.
Press the [ 6 ] button to move the next
folder. Press the [ 5 ] button to move the
previous folder.
2.To select a track, press the [
] or [
]
button.
Search Function
1.P ress the [MENU /
] button to enter
fold sch mode. Press the [VOLUME]
button to enter the folder list search mode.
2. Turn the [VOLUME] knob to select a folder.
3.Press the [VOLUME] button to enter the
file list search mode. And then the track
list appears in the display.
4. Turn the [VOLUME] knob to select a track.
5. Press the [VOLUME] knob to play.
* When play back MP3 / WMA file, this
function is performed in the current folder.
Top function
The top function resets the CD player to the
first track of the disc. Press and hold the [ 4 ]
button (1 sec.) to play the first track (track No.
1) on the disc.
*In case of MP3/WMA, the first track of the
current folder will be played.
Other various play functions
Scan play
This function allows you to locate and play
the first 10 seconds of all the tracks recorded
on a disc.
Press the [ 1 ] button to perform scan play.
Repeat play
This function allows you to play the current
track repeatedly or play a track currently
being played in the MP3/WMA folder
repeatedly.
CD:
1.Press the [ 2 ] button once or more until
“RPT ON” appears on the LCD to perform
repeat play.
2.Press [ 2 ] button again to cancel repeat
playback, “RPT OFF” appears on the
LCD.
MP3/WMA:
1.Press the [ 2 ] button once or more until
“TRACK RPT” appears on the display to
perform repeat play, and “RPT” segment
lights on.
2.For MP3/WMA files, press [ 2 ] button
repeatedly until “FOLD RPT” appears on
the display for folder repeat play.
3.Press [ 2 ] button repeatedly until “RPT
OFF” appears on the display to cancel
repeat playback, and “RPT” segment
goes off.
Random play
This function allows you to play all tracks
recorded on a disc in a random order.
Press the [ 3 ] button to perform random
play.
English
CD/MP3/WMA Operations
USB Operations
1.Open the cover of the USB connector to
the right. Insert a USB cable (CCA-755)
into the USB connector. Insert a USB
device into the USB cable.
When connecting a USB device, the unit
will read the files automatically.
2.To remove the USB device, you should
first select another source or turn off
the power, in order to avoid damaging
the USB device. Then take off the USB
device. Open the cover to the left.
3.O p e r a t i o n i s s a m e a s M P 3 / W M A
operation.
CCA-755
CZ302
10
English
iPod & iPhone Operations
iPod & iPhone Operations
Connect
•Some iPod models do not support this
function. Consult your nearest Clarion
dealer or website to confirm which models
do not support this function.
Connect an iPod or iPhone to the USB
connector via CCA-748 cable.
When connecting a device, the unit will read
the files automatically. The track information
displays on the screen once playback start.
MENU
In the S-CTRL OFF mode, press [MENU / ]
button, rotate the [VOLUME] knob select
“MUSIC” or “VIDEO”.
Select “MUSIC”, press the [VOLUME]
knob, then rotate the [VOLUME] knob to
show PLAY LISTS / ARTISTS / ALBUMS /
GENRES / SONGS / COMPOSERS, press
and rotate the [VOLUME] knob to select a
desired option, then press the [VOLUME]
knob to confirm.
Select “VIDEO”, press the [VOLUME] knob,
then rotate the [VOLUME] knob to show
MOVIES / MUSIC VIDEO / TV SHOWS /
VIDEO PODCASTS / RENTALS, press
and rotate the [VOLUME] knob to select a
desired option, then press the [VOLUME]
knob to confirm.
Note:
VIDEO MENU item is different by the model
of connected iPod and language setting.
Repeat play
This function allows you to play the current
track repeatedly or play all tracks in your
iPod/iPhone repeatedly.
1.Press the [ 2 ] button once or more until
“RPT ON” appears on the LCD to perform
repeat play.
2.Press [ 2 ] button repeatedly until “RPT
OFF” appears on the LCD to cancel repeat
playback.
Random play
This function allows you to play all tracks
recorded on a disc in a random order.
1.Press [ 3 ] button repeatedly until “ALBUM
RDM” appears on the LCD for album random
play.
11
CZ302
iPod menu alphabet search
to monitor
CCA-748
2.Press the [ 3 ] button once or more until
“SONG RDM” appears on the LCD to
perform random play.
3.Press [ 3 ] button repeatedly until “RDM
OFF” appears on the LCD to cancel
random playback.
Setting iPod simple control mode
Use this function if you wish to operate
through your iPod connected to this unit via
the USB cable.
* The factory default setting is “ OFF “.
1.Press and hold [ DISP ] button to enter
system setup.
] or [
] button to select
2.Press [
“ S-CTRL“.
3.Rotate the [VOLUME] knob to select
“ ON “ or “ OFF “ .
•O N: Operations are made through your
iPod.
•O F F: O p e r a t i o n s c a n n o t b e m a d e
through your iPod.
Notes:
•When performing iPod operations using
simple control mode, make the operations
slowly. If repetitive operations are
performed too quickly, unforeseen errors
may occur.
•When performing iPod operations using
simple control mode, please do not
operate the iPod and the unit at the same
time, otherwise there may be unexpected
event happened.
This function searches the subfolders for
desired alphabetical letters.
1.Press the [MENU / ] button to select the
iPod menu mode.
2.P ress the [VOLUME] knob to switch
between categories.
MUSIC: PLAYLIST, ARTISTS, ALBUMS,
GENRES, SONGS, COMPOSERS
VIDEO: MOVIES, MUSIC VIDEOS,
TV SHOWS, VIDEO PADCASTS,
RENTALS
3.Press the [VOLUME] knob. (The contents
of the category are displayed.)
4.Press and hold the [DISP] button (1 sec.).
5.Rotate the [VOLUME] knob to select the
desired letter to search.
6.P ress the [DISP] button again to next
perform search.
7. Press the [ VOLUME ] knob to confirm.
Listening to Pandora
You can listen to Pandora internet radio by
connecting an iPod/iPhone that has Pandora
Application already installed.
To start streaming, connect the iPod/iPhone
with Pandora already launched.
When the unit displays “PLEASE LAUNCH
PANDORA APPLICATION ON MOBILE
DEVICE” in PANDORA mode, please launch
the Pandora Application by operating the iPod/
iPhone connected.
] button to enter the
1.Press the [SRC/
Pandora mode.
Selecting a station from list
] button and select ”BY
Press the [MENU /
DATE” or ”A-Z” by rotating the [VOLUME]
knob and press the [ VOLUME ] knob.
• BY DATE: List in an created date order
• A-Z: List in an alphabetical order
Go to next station or previous station(an
alphabetical order)
] button on the panel or remote
Press the [
control to go to next station.
] button on the panel or remote
Press the [
control to go to previous station.
Thumbs up/down
Thumbs up:
press the [ 6 ] button on the panel or the [RDM]
button on the remote control for thumbs up.
Giving a track the thumbs up will tell Pandora
to play more tracks like that one.
Thumbs down:
press the [ 5 ] button on the panel or the [SCN]
button on the remote control for thumbs down.
Giving a track the thumbs down will skip to the
next track (subject to skip limit), and Pandora
will remember not to play that track on the
station again.
Notes:
•You can personalize your stations by
“thumbs up” or “thumbs down”.
• Pandora limits the number of thumbs down allowed on their service.
If you attempt to thumbs down tracks
beyond the limit, the current song continues
to playback.
BOOKMARK artist or song
Short-press the [VOLUME] knob or the [RPT]
buton on the remote control to Bookmark
artist.
Long-press the [VOLUME] knob or the [RPT]
button on the remote control to Bookmark
current artist of the track.
Creating new stations
Short-press the [1] button on the panel to
create a new station from the current artist.
Long-press the [1] button on the panel to
create a new track.
Note:
If the name of the station you wish to create
for a track title or an artist name is the same
as the station name currently playing, “NOW
PLAY” appears on the display and the station
will not be created.
Bluetooth Operations
Skip
Press the [BAND / ] button on the panel or
on the remote control for the next tracks in
station.
Note:
•Pandora limits the number of skips allowed
on their service. If you attempt to skip tracks
beyond the limit, ”SKIP LIMIT” is displayed.
Play/Pause
Press the [ 4 ] button on the panel or the [
button on the remote control for play/ pause.
]
Connect
Connect an iPod or iPhone to the USB
connector via CCA-748 cable.
When connecting a device, the unit will read
the files automatically. The track information
displays on the screen once playback start.
MENU
In the S-CTRL OFF mode, press
] button,rotate the [VOLUME]
[MENU /
knob select “MUSIC” or “VIDEO”.
Select “MUSIC”, press the [VOLUME] knob,
then rotate the [VOLUME] knob to show PLAY
LISTS / ARTISTS / ALBUMS / GENRES /
SONGS / COMPOSERS, press
and rotate the [VOLUME] knob to select a
desired option, then press the [VOLUME]
knob to confirm.
Select “VIDEO”, press the [VOLUME] knob,
then rotate the [VOLUME] knob to show
MOVIES / MUSIC VIDEOS / TV SHOWS/
VIDEO PODCASTS / RENTALS, press and
rotate the [VOLUME] knob to select a desired
option, then press the [VOLUME] knob to
confirm
Note:
VIDEO MENU item is different by the model of
connected iPod and language setting.
Repeat play
This function allows you to play the current
track repeatedly or play all tracks in your
iPod/iPhone repeatedly.
1.Press the [ 2 ] button once or more until
“RPT ON” appears on the LCD to perform
repeat play.
2.Press [ 2 ] button repeatedly until “RPT
OFF” appears on the LCD to cancel repeat
playback.
The Bluetooth allows you to utilize your car’s
built-in audio system for wireless mobile
phone or music handsfree communication.
Some Bluetooth mobile phones have the
audio features, and some portable audio
players support Bluetooth feature. This
system can play audio data stored in a
Bluetooth audio device. The car stereo with
Bluetooth will be able to retrieve phonebook
contacts, received call, dialed call, missed
call, incoming calls, outgoing call and listen
to music.
Notes:
• Do not leave the microphone of Bluetooth
handsfree in the places with wind passing
such as air outlet of the air conditioner,
etc. This may cause a malfunction.
•If leave it in the places subjected to
direct sun, high temperature can cause
distortion, discoloration which may result
in a malfunction.
•This system will not operate or may
operate improperly with some Bluetooth
audio players.
•C l a r i o n c a n n o t g u a r a n t e e t h e
compatibility of all mobile phones together
with unit.
•Audio playback will be set to the same
volume level as set during telephone call.
This might cause problems, if extreme
volume level is set during telephone call.
Handsfree Operations Pairing
1.Turn on Bluetooth function of your mobile
phone.
2.E nter mobile phone’s Bluetooth setup
menu.
3. Search for new Bluetooth devices.
4.Select CZ302 from the pairing list on the
mobile phone.
5.E nter “0000” as the password (The
password default setting is “ 0000 ”).
6. After pairing successfully, the unit will
enter Bluetooth mode automatically, and
“BLUETOOTH CONNECTED” will appear
on the LCD.
7. The unit can connect three units.
*During pairing, depending on type of
mobile phone, a six digit PIN code will be
shown on both the source unit’s display
and the mobile phone.
In this case, please make sure that you
have the same PIN code on both devices,
and then confirm on the mobile phone.
English
iPod & iPhone Operations
Making a call
Operation from Bluetooth menu
] button to switch the
Press the [SRC /
source to “BLUETOOTH”. Press [MENU / ]
button to select a way to make outgoing call:
• Dial Number
1.Press the [MENU / ] button.
2. Rotate the [VOLUME] knob on to switch:
, “DIAL NUMBER”.
3. Press the [VOLUME] knob to confirm the
selection.
4.Rotate the [VOLUME] knob to select a
number, press the knob to confirm and
ready to input the next digit. Repeat the
above until all numbers inputted.
5. Press the [BAND / ] button to dial.
6. Press [MENU / ] to terminate call.
• Dialled/Missed/ Received
You can search any Dialled/Missed/
Received .
1.R otate the [VOLUME] knob to select
“DIALLED”, “MISSED” , “RECEIVED”.
2.Press the [VOLUME] knob to enter the
selected call history.
3.Rotate the [VOLUME] knob to scroll the
contacts.
4.When the contact name or mobile phone
No. is displayed, press the [VOLUME]
knob to call the mobile phone No. of that
contact.
* Press the [MENU /
] button to end the
call.
• Call from Phonebook
You can search the contact name in the
phonebook and make call.
CZ302
12
English
Bluetooth Operations
1.Rotate the [VOLUME] knob to select “USER
PHONEBOOK” .
2.P ress the [VOLUME] knob to enter the
selected phonebook.
3.R otate the [VOLUME] knob to scroll the
contacts.
4.The phone number and the name to scroll
display.When the contact name is displayed,
press the [VOLUME] knob to call the mobile
phone No. of that contact.
*Press the [MENU / ] button to end the call.
Notes:
•Some mobile phones may not be able to
transfer data of Phonebook.
•After RESET, please wait few minutes until
data transferred following to the Bluetooth
mode selection. During that, “PHONEBOOK
UPDATING” is on the display.
• Redial
You can call last dialed number.
Press and hold the [BAND / ] button (1sec).
• Call Transfer
You can switch Handsfree call and mobile
phone call.
Press the [BAND / ] button during call.
• Answering a call
You can answer an incoming call by pressing
the [BAND / ] button.
*Press the [MENU /
] button to reject an
incoming call.
Audio Streaming Operations
What is audio streaming?
Audio streaming is a technique for transferring
audio data such that it can be processed as
a steady and continuous stream. Users can
stream music from their external audio player
to their car stereo wirelessly and listen to the
tracks through the car’s speakers. Please
consult your nearest Clarion dealer for more
information on the product of wireless audio
streaming transmitter offered.
13
CZ302
Bluetooth Operations
CAUTION
Please avoid operating your connected
mobile phone while audio streaming as
this may cause noise or sound choppy
on the song playback.
Audio streaming may or may not
resume after telephone interrupt as this
is dependent on mobile phone.
System will always return to
Radio mode if audio streaming is
disconnected.
Note:
Be sure to read the chapter “Pairing before
proceeding.
Play / Pause a track
1.P ush the [ 4 ] button to pause audio
playback.
2.To resume audio playback, push the [ 4 ]
knob again.
display and return to previously selected audio
source. Some Bluetooth audio players may not
have play / pause synchronized with this unit.
Please make sure both device and main unit are
in the same play / pause status in BT MUSIC
mode.
ID3TAG display
During music streaming playback, for music
information that is longer than the display panel:
When SCROLL is ON, the LCD will display ID3
TAG information cyclely, e.g: ALBUM->TITLE
->ARTIST...
When SCROLL is OFF, the LCD will display
one of the ID3 TAG information, the default
is TRACK, but user can adjust it to other
ID3 TAG information by press [DISP]
button.
Selecting a track
Track-up
1.Press the [
] button to move to the
beginning of the next track.
2.Each time the [
] button is pressed,
playback proceeds to another track in
the advancing direction.
Track-down
1.Press the [
] button to move to the
beginning of the previous track.
2.Each time the [
] button is pressed,
playback proceeds to previous track in
the reverse direction.
Note:
Playing order will depend on Bluetooth
audio player. When [
] button is
pressed, some A2DP devices will restart
the current track depends on the duration
of playback.
During music streaming playback,
“A2DP ” will be shown on the display.
When A2DP and HFP device
is disconnected,“BLUETOOTH
DISCONNECT” will be shown on the
AUX Operations
Press [SRC /
] button on the panel to select
“AUX”.
AUX is just for audio content with 3.5mm Jack
connector plugged into audio-in socket on the
front panel.
AUX Input sensitivity setting
1. Press and hold the [DISP] button (1 sec.).
2.T urn the [VOLUME] knob to select “AUX
SENS”.
3.If the output level of connected external audio
player is “HIGH”, rotate [VOLUME] knob
and choose “LOW”. And if the output level is
“LOW”, choose “HIGH”.
Problem
USB device cannot be
inserted.
GENERAL
Problem
Unit can not power on.
Cause
Unit fuse blown.
Car battery fuse blown.
Unit can not power on.
Nothing happens
when buttons are
The microprocessor has
pressed.
Measure
Replace with new fuse of correct rating.
Replace with new fuse of correct rating.
Turn off the power and remove the DCP.
Press the [RESET] button with a thin rod.
Note:
When the [RESET] button is pressed, turn off
malfunctioned due to noise, etc. the ACC power.*
Display is not
accurate.
* When the [RESET] button is pressed,
frequencies of radio stations, titles, etc. stored
in memory are cleared.
Improper audio output connection. Check wiring and correct.
Volume set too low.
No/low audio output.
Poor sound quality or
distortion.
Increase volume level.
Speakers damaged.
Replace speakers.
Heavily biased volume balance.
Adjust the channel balance to center position.
Speaker wiring is in contact with
metal part of car.
Insulate all speaker wiring connections.
Non-standard disc used.
Use a standard disc.
Speaker power rating does not
match unit.
Replace speakers.
Wrong connections.
Check wiring and correct.
Speaker is shorted.
Check wiring and correct.
Unit resets itself when Incorrect connection between ACC
Check wiring and correct.
engine is off.
and Battery.
Disc cannot be
loaded.
Sound skips or is
noisy.
Sound is bad when
power is first turned
on.
Cause
Another disc is already loaded.
There is an object install installed
the unit.
Compact disc is dirty.
Compact disc is heavily scratched
or warped.
Condensation may form on the internal
lens when the car is parked in a
humid place.
Measure
Eject the disc before loading the new one.
Remove the object inside the unit.
Clean the compact disc with a soft cloth.
Replace with a compact disc with no
scratches.
Let dry for about 1 hour with power on.
Measure
Reversing the connection direction of the USB device,
try it again.
The USB connector is broken.
Replace with a new USB device.
The USB device is damaged.
Disconnect the USB device and reconnect. If the
device is still not recognized, try replacing with a
different USB device.
Connectors are loose.
No sound heard with
the display “No File”
shown.
No MP3/WMA file is stored in the
USB device.
Store these files properly in the USB device.
Sound skips or is noisy.
MP3/WMA files are not encoded
properly.
Use MP3/WMA files encoded properly.
Bluetooth
Problem
Cannot pair the
Bluetooth enabled
device with the car
audio system.
The audio quality
is poor after
connection with a
Bluetooth-enabled
device.
Cause
Measure
The device does not support the
Use another device to connect.
profiles required for the system.
The Bluetooth function of the device Refer to the user manual of the device for how to
is not enabled.
enable the function.
Adjust the position of the microphone.
The microphone is not correctly
For example, stick the microphone onto the dashboard
positioned.
where close to the driver.
Move the device closer to the car audio system or
The Bluetooth reception is poor.
remove any obstacle between the device and the
system.
SiriusXM Advisory Messages
Message
CHEK TUNER
CHK ANTENA
DISC Player
Problem
USB device is not
recognized.
Cause
The USB device has been inserted
with wrong direction.
English
6. TROUBLE SHOOTING
NO SIGNAL
CHAN UNSUB
CH UNAVAIL
CH LOCKED
SUBSCRIPTN
UPDATED
Description
Check the SiriusXM tuner connection on the back of the unit to ensure that its correctly
connected.
Ensure the SiriusXM antenna cable is connected to the SiriusXM tuner correctly.
Check the SiriusXM antenna wire for breaks or sharp bends. Replace the antenna if necessary.
Press RESET located….. If the message remains, the antenna may have been damaged.
The vehicle must be outside, and the antenna must have a clear view of the southern sky.
The magnetic antenna must be mounted on the outside of the vehicle for the best reception.
This channel is not included in your SiriusXM subscription plan.
Call 1-800-XM-RADIO (1-800-967-2346) to subscribe.
This channel is not a valid SiriusXM channel.
The channel number has been entered incorrectly, or the channel was removed from the
SiriusXM channel lineup
The selected channel has been locked by the parental controls, or a mature channel has been
selected.
A prompt to enter the unlock code will appear. Enter the unlock code as described on page 9.
An update to your SiriusXM subscription has been received by the SiriusXM tuner. Press any
button to continue.
CZ302
14
8. SPECIFICATIONS
The disc format is not supported.
Try another disc.
This is a failure of deck’s mechanism.
Consult your store of purchase.
If an error display other than the ones described above appears, press the [RESET] button. If the
problem persists, turn off the power and consult your store of purchase.
*When the [RESET] button is pressed, frequencies of radio stations, titles, etc. stored in
memory are cleared.
General
AM Tuner
Frequency range: 530-1710kHz
Usable sensitivity (S/N=20dB): 30dBμ
CD Player
System: Disc digital audio system
Frequency response: 20Hz-20kHz
Signal/noise ratio: >94dB
Total harmonic distortion: Less than 0.1% (1kHz)
Channel separation: >60dB
MP3/WMA mode
MP3 sampling rate: 8 kHz to 48 kHz
MP3 bit rate: 8 kbps to 320 kbps / VBR
WMA bit rate: 8 kbps to 320 kbps
Logical format: ISO9660 level 1,2
J oliet file system
USB
Specification: USB 1.0/2.0
Playable audio format:
MP3(.mp3): MPEG 1/2/Audio Layer-3
WMA(.wma): Ver 7/8/9.1/9.2
Power supply voltage:
14.4VDC (10.8 to 15.6V allowable),
negative ground
Pre-Amp output voltage:
2.0V (CD play mode: 1kHz, 0dB, 10k load)
Fuse: 15A
Dimensions of the Main Unit:
188mm Width × 58mm Height × 190mm Depth
7-2/5(width) × 2-7/25(Height) × 7-12/25(Depth)
Weight of the Main Unit: 2.97lb.(1.35kg)
Dimensions of the Remote Control unit:
43mm Width × 11mm Height × 113mm Depth
1-2/3(Width) × 2/5(Height) × 4-2/5(Depth)
Weight of the Remote Control Unit:
1.16oz. (36g) (including battery)
7”
178mm
6-2/3” 170mm
Bluetooth
Specification: Bluetooth Ver. 2.0+EDR
Profile: HFP (Hands-free Profile)
A2DP (Advanced Audio Distribution Profile)
AVRCP (AV Remote Control Profile)
PBAP (Phone Book Access Profile)
Send/Receive Sensitivity: Class 2
7-2/5” 188mm
Note:
Input
Audio input sensitivity:
High: 320mV (at 1V output)
15
CZ302
allowable)
50mm
1-4/5”
46mm
2-7/25”
58mm
•S pecifications and design are subject
to change without notice for further
improvement.
Audio Amplifier
Maximum power output:
180W (45W x 4)
Speaker impedance: 4 (4 to 8
2”
163mm
Measure
Eject the disc then reload it properly.
Mid: 650mV (at 1V output)
Low: 1.3V (at 1V output)
(input impedance 10 k or greater)
Aux-in level: ≤2V
6-2/5”
ERROR 5
Cause
Disc is inserted incorrectly.
Frequency range: 87.9-107.9MHz
Usable sensitivity: 8dBf
Frequency response: 30Hz-15kHz
Stereo separation: 30dB(1kHz)
Signal/noise ratio: >55dB
1/2” 14 mm
Display
ERROR 3
FM Tuner
190mm
If an error occurs, one of the following displays is displayed.
Take the measures described below to solve the problem.
7-12/25”
English
7. ERROR DISPLAYS
Power Output:
19W RMS x 4 Channels at 4
and 1% THD+N
Signal to Noise Ratio:
94dBA (reference: 1W into 4)
1.Prepare all articles necessary for
installing the source unit before
starting.
2.Install the unit within 30° of the
horizontal plane. (Figure 2)
3.If you have to do any work on the car
body, such as drilling holes, consult
your car dealer beforehand.
CONTENTS
1) Before Starting....................................................................... 16
2) Package Contents.................................................................. 16
3) General Cautions................................................................... 16
4) Cautions on Installation.......................................................... 16
5) Installing the Source Unit....................................................... 16
6) Removing the Source Unit..................................................... 17
7) Wiring and Connections......................................................... 18
8) Connecting the accessories................................................... 18
English
4) Cautions on Installation
9. I NSTALLATION / WIRE
CONNECTION GUIDE
4.Use the enclosed screws for
installation.
Using other screws can cause
damage.
(Figure 3)
Chassis
Chassis
Damage
Max 30˚
Max. 6 mm (M5 screw)
1) Before Starting
Figure 2
1.This set is exclusively for use in cars with a
negative ground 12 V power supply.
2.Read these instructions carefully.
3.Be sure to disconnect the battery “terminal” before
starting. This is to prevent short circuits during
installation. (Figure 1)
5) Installing the Source Unit
Car battery
Figure 1
2) Package Contents
Wire connector............................................. 1
DCP case..................................................... 1
Remote control unit (with battery)................ 1
Owner’s manual........................................... 1
Warranty card............................................... 1
Special screw (Front panel lock).................. 1
3) General Cautions
1.Do not open the case. There are no
user serviceable parts inside. If you
drop anything into the unit during
installation, consult your dealer or an
authorized Clarion service center.
1.Place the mounting bracket into the instrument panel, use a screwdriver to bend
each stopper of the mounting bracket inward, then secure the stopper.
2.Wire as shown in Section 7) .
3.Insert the source unit into the mounting bracket until it locks.
4.Take care of the top and bottom of the trim ring and mount it so that all the hooks
are locked.
Notes:
1.Some car models require special mounting kits for proper installation.
Consult your Clarion dealer for details.
2. Fasten the front stopper securely to prevent the source unit from coming loose.
• Console opening dimensions
(182 mm)
2.Use a soft, dry cloth to clean the case. Never use a rough cloth, thinner,
benzine, or alcohol etc. For tough dirt, apply a little cold or warm water to a
soft cloth and wipe off the dirt gently.
Hole
53 mm
Source unit................................................... 1
Front panel................................................... 1
Trim ring....................................................... 1
Mounting bracket.......................................... 1
Screws M5x6 mm......................................... 4
L-key............................................................. 2
Figure 3
CZ302
16
English
Notes of installation
1. Before installation, please make sure
proper connections are conducted and
the unit operates normally. Improper
connection may result in damage to the
unit.
2. Use only accessories designed and
manufactured for this unit and other
unauthorized accessories may result in
damage to the unit.
3. Before installation, please fasten all power
cables.
4. DO NOT install the unit in the place where
close to hot area to prevent damage to
electrical components such as the laser
head.
5. Install the unit horizontally. Installing the
unit more than 30 degree vertically may
result in worse performance.
Dashboard
Method B
6) Removing the Source Unit
6. To prevent electric spark, connect the
positive pole first and then the negative
pole.
7. DO NOT block the cooling fan exit to
ensure sufficient heating dissipation of this
unit, or it may result in damage to this unit.
Disassemble trim ring
1. Push the trim ring to right and pull out the
right part.
Unit Installation
M5x6
Method A
1. Insert mounting bracket into dash board,
choose appropriate mounting tab according
to the gap width, bending the mounting
tab outwards with a screwdriver to fix the
mounting bracket in place.
2. Slide the unit into the bracket until you hear
a click sound.
2. Push the trim ring to left and pull out the
left part.
Dashboard
Mounting Frame
Screwdriver
1. Insert this unit directly to the opening of
the dashboard.
2.Place M5×6 cylindrical screw through the
holes of the mounting frame located inside
the opening to holes of the unit and fasten
the screws to left & right.
Trim ring installation
Disassemble the unit
1. Switch off the power.
2. Remove the panel.
3. Remove the trim ring.
4.Insert the removal keys straight back until
they lock, then pull the unit out.
Attach the trim ring around the front panel.
Take care of the top and bottom of the trim
ring and mount it so that all the hooks
are locked.
5. Disconnect all the wires.
Mounting Bracket
Top
Bottom
17
CZ302
7) Wiring and Connections
Black
White
Gray
Rear Left /
SUB OUT 1
Rear audio output (Left)/
Subwoofer output 1
Front Right
Gray/Black
White
Black
Red
Rear Right /
SUB OUT 2
Black
Brown wire (Phone mute lead)
Connect to cellular phone mute lead.
Front Left
White/Black
Purple
Rear Right
Yellow wire (Memory back-up lead)
Connect directly to battery
FUSE 15A
Purple/Black
Gray
White
Red
Green
Left
Right
Front audio
output terminal
Black
Rear Left
Red wire (Power lead)
Accessory
12V
Green/Black
4-Speaker system
SWC
Steering wheel
control terminal
Rear audio output (Right)/
Subwoofer output 2
Black
MIC
Black
External microphone
(RCB-199:Sold by separately)
English
16-Pin Connector Extension Lead
(attached to the source unit)
or
Blue/White wire (Amplifier turn-on lead)
Connect to remote turn-on lead of amplifier
2-Speaker system
Black wire (Ground lead)
Gray
Front Right
White
Front Left
Connect to vehicle chassis ground
Gray/Black
White/Black
Orange/White wire (Illumination lead)
Connect it to the car power supply terminal
for illumination
Purple
(Black)
Antenna
Purple/Black
Green
Refer to the right
Not used.
Insulate each wire
Blue wire (Auto antenna lead)
Connect it to the car power supply terminal
for antenna
Green/Black
8) Connecting the accessories
SiriusXM Connect™ Vehicle Tuner to
be connected:Sold separately
•Connecting to the external amplifier
External amplifiers can be connected to the 4 channel RCA output connections. Ensure that the connectors are not grounded or shorted to prevent damage to the
unit.
CZ302
18
Clarion Co., Ltd.
All Rights Reserved. Copyright © 2012: Clarion Co., Ltd.
Printed in China / Imprimé en Chine / Impreso en China
PN: 127075013932