POL-EKO SMART Quick Start Manual

Quick Start Guide SMART ver. 1.23 (issued 3.01.2023)
Figure 2 Unmounting USB flash drive
Full manual is available on the website https://www.pol-eko.com.pl/download-english/
1.
First boot
During the first boot, the screen (Figure 1) will display information about saving the "Download" folder (with instruction manual in pdf format) on the USB flash drive. In order to do it,
insert the USB flash drive and wait a second for hardware detection, then press
. If you
press
you quit downloading the folder. The window will appear again during the next boot.
You can tick „Don’t show again” so that the window will not be displayed after switching on
the device.
Figure 1 Downloading the files
The folder “Download” can be downloaded from the submenu „Info”. To do it, go to the main
menu
and press the icon
. In order to save the full version of the instruction manual
on the USB flash drive, press the icon
. After inserting the flash drive into USB port wait
few seconds until the information “Flashdrive connected” will appear on the display.
After copying the data to the USB flash drive, before removing it from the
USB socket, it should be unmounted by pressing the icon
in the top
drop-down list (Figure 2). If the pendrive is not unmounted after connecting
to the computer, a message about pendrive damage may be displayed with
a repair proposal, when actually the pendrive is not damaged.
Before removing USB flash drive from the USB socket, it should be unmounted.
All CE declarations of conformity are in the full version of the instruction manual.
Quick Start Guide SMART ver. 1.23 (issued 3.01.2023)
Figure 2 Unmounting USB flash drive
Full manual is available on the website https://www.pol-eko.com.pl/download-english/
1.
First boot
During the first boot, the screen (Figure 1) will display information about saving the "Download" folder (with instruction manual in pdf format) on the USB flash drive. In order to do it,
insert the USB flash drive and wait a second for hardware detection, then press
. If you
press
you quit downloading the folder. The window will appear again during the next boot.
You can tick „Don’t show again” so that the window will not be displayed after switching on
the device.
Figure 1 Downloading the files
The folder “Download” can be downloaded from the submenu „Info”. To do it, go to the main
menu
and press the icon
. In order to save the full version of the instruction manual
on the USB flash drive, press the icon
. After inserting the flash drive into USB port wait
few seconds until the information “Flashdrive connected” will appear on the display.
After copying the data to the USB flash drive, before removing it from the
USB socket, it should be unmounted by pressing the icon
in the top
drop-down list (Figure 2). If the pendrive is not unmounted after connecting
to the computer, a message about pendrive damage may be displayed with
a repair proposal, when actually the pendrive is not damaged.
Before removing USB flash drive from the USB socket, it should be unmounted.
All CE declarations of conformity are in the full version of the instruction manual.