Lifepro ALLEVARED User Manual

Lifepro ALLEVARED is a red light therapy belt designed to enhance wellness and recovery. It features 105 LEDs that provide full coverage for the lower back and waist, and can also be used on the upper back, arms, legs, and feet. The device offers customizable treatments with five intensity levels, three modes (red, near-infrared, and combined), and pulsed light therapy. ALLEVARED is lightweight, foldable, and comes with multiple power options making it convenient for at-home use or on-the-go.

PDF Download
Document
Lifepro ALLEVARED User Manual - Red Light Therapy Belt | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • 105 LEDs
  • 3 Modes
  • 5 Intensity Levels
  • Pulsed Light Therapy
  • Foldable
  • Multiple Power Options

Frequently asked questions

The AllevaRed has three modes: red light therapy (660nm), near-infrared therapy (850nm), and red + near-infrared therapy (660+850nm).

Pulsed light therapy uses rapid pulses of light to produce improved results. The light rapidly turns on and off at a particular frequency (for example 10 Hz). The frequency is a measure of the pause between one 'on' time and the next. With 10 Hz pulsed light therapy, the light pulses on and off 10 times per second. Press the On/Pulse/Off button once to turn on 10 Hz pulsed light therapy.

We recommend 30-minute treatment sessions with your AllevaRed for optimal results. We recommend using the AllevaRed 3–7 times per week, depending on your wellness goals. Do not use continuously for more than 30 minutes, and wait at least 2 hours between 30-minute sessions.

For red light therapy to work most effectively, it is best to wear the AllevaRed directly against your skin. However, you may use the AllevaRed over light cotton clothing, if desired.

Wipe down the inside of the AllevaRed belt with a soft, dry cloth after each use. Never allow water or other liquids to come into contact with the device. Do not use abrasive, corrosive, solvent, or chemical cleaners or harsh detergents. Make sure to turn off, unplug, and allow the AllevaRed to cool down before cleaning.
Preparing document for printing…
0%