Bush Hog | Tough SQ84T SQUealer | 42 The Grillo Climber Mower 9.21 Discover The

HYDROSTATICALLY SELF-PROPELLED
Hydrostatic Transmission
Control (Reverse) Hydrostatic Transmission Attachment Drive & Brake Control
Control (Forward)
Discover The Cutting Edge
Manufactured & Assembled in the USA
Adjustable Ground
Speed Control
Great for clearing under brush & saplings,
mowing around trees & under fences and
clearing paths & trails
L/R Pivot Trigger
Attachment
Rise/Lower
Transmission Control
MOWERS - GRILLO/TURF TEQ
pictured: Model 1305
Differential Lock- Standard
Park Brake - Optional
13 HP Honda© Engine
Large Tires Hydrostatic drive
Heavy 4-ply 18"x6.5"
Attachment Mounting Point
26" cutting width
28" wide deck
Mowing deck is
adjustable from center
up to 12" to the left
Two height adjustments
2.75" and 3.75"
Replaceable skids
Brush Cutter
12° of articulation between power unit and mowing deck
Power Rake
Power Broom
Power Edger
Model 1305 Multi-Use Tractor For Use With Quick Change Attachments
NEW
TUR 1305PL Plow
The 46 inch wide plow is ideal for snow removal
and grading/leveling soil and gravel. The Plow
angle (left/right) can be easily adjusted from the
operator position and its unique design has the
capability to allow the blade to oscillate or to be
locked into position. The Model 1305PL utilizes
an innovative compression spring trip release.
Additional features include a replaceable cutting
edge, a fully hydrostatic transmission with forward
/reverse and a 13 HP Honda engine. The Plow
can also be easily converted into a Power Edger,
Power Broom, Power Rake or Brush Cutter for all
season use. Plow also sold separately.
Design
The Grillo Climber Mower 9.21
The Climber will go where no
other ride-on mower will.
A 36” rear discharge tuff cut mower with 21 HP Vanguard air
cooled engine, front brakes, differential lock, roll bar, hydrostatic
transmission, and swing away blades. Extend your mowing into
sloping terrain, rough ground and tall grass.
The Climber’s unique design, with its low center of
gravity, central weight distribution, and differential
locking capability will help you mow places you
can’t even take a tractor. Go places you have
never gone before and extend your mowing where
previously impossible. The Climber is designed to
mow safely up and down slopes up to 33° and up
to 17° across slopes, even on difficult and slippery
terrain.
Reliability
The difference with Grillo is that as a family owned
business, established on quality, keeping this
value in their products is very important. Grillo
is Italian and built to last. Their high quality
components, top class manufacturing and
highly innovative design makes their mower
stand out above the rest. Professional equipment
that provides great performance.
Performance
The Climber is designed for the rough stuff. It
will take care of 3' tall grass, weeds and brush.
It’s capable of flattening an overgrown section,
or those properties you can’t mow every week,
making it a perfect choice for the Christmas tree
grower. Non-mulching rear discharge is the secret
to this aggressive and effective cutting system.
The Climber loses no power as it charges through
grass, leaving an even spread of cut grass in it’s
wake.
42
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: info@oescoinc.com
The Ultimate Tree Mower
A unique mower designed to maintain grass and
small brush growth on tree farms, nurseries
and blueberry farms
VENTRAC 3100/3200
with Tree Mower - LQ450
VENTRAC 3100/3200 Spraying Unit
VENTRAC - COMPACT TRACTORS
GAS OR DIESEL ENGINE OPTIONS
• All Wheel Drive
• Tree Deck 45”
• Hydro Lift
• 3 Cutting Heights - 2 1/4", 3 1/2", 4 3/4"
• Branch Lifters & Tire Covers - Standard
• Rear Engine Design, Less Heat/Noise/Exhaust
• Counter Rotating Blade, Rear Discharge Leaves Clippings in Middle
• 26” Turning Radius
• Suspended front chains, cuts tall grass more effectively,
reduces potential of front discharge
• Single swivel front tire
• Optional weed sprayer listed below
Sprayer nozzles are adjustable in width and height
SPRAY ATTACHMENT SPECIFICATIONS
Tank: 15 gallon polyethylene
Pump: 1.4 GPM, 12 volt diaphragm pump
Pressure: Manual adjustable bypass
Spray Nozzles: Single swivel nozzle bodies mounted one
each side of tractor. Adjustable in width and height
Controls: Independent nozzle controls right or left
Valves: Manual valves
Steel Framework: Easily attaches to tractor hitch
Tips: Standard, off-center flat fan, other tips available
as options.
Hand wand with 6’ hose included for spot spray treatment.
SET Ventrac-12V
All components available separately
Single swivel adjustable nozzle body with OC tips
VENTRAC with LC150 Stump Grinder
The LC150 stump grinder features 12 replaceable carbide cutting teeth.
Adjustable blade hydraulically lowers to double as a jack stand and depth gauge.
AVAILABLE FOR MODELS 3000, 3100 AND 3200
LC150 STUMP GRINDER SPECIFICATIONS
Rotor tip speed: 2,475 ft./min*
Rotor RPM: 620 RPM*
Cutting depth below ground level: 6"
* Engine speed of 3200 RPM
Ideal for grinding stumps in the tight quarters of a choose and cut operation
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: info@oescoinc.com
43
4200VXD ...PROFESSIONAL GRADE
VENTRAC - COMPACT TRACTORS
The 4200VXD Compact Articulating Tractor is professional grade, giving
you the ultimate in power, performance and productivity all in one
machine. Others can only dream about Ventrac's innovative design of
an articulating, oscillating frame, combined with All-Wheel-Drive allowing
you to maneuver around obstacles and traverse a variety of terrain.
4200VXD
RENTAL
AVAILABLE
Engines
745cc
Kawasaki 27 hp Gas 2-cyl
Vanguard 26.5 hp Dsl 3-cyl
952cc
952cc
Vanguard 31 hp Gas 3-cyl
Vanguard 31 hp Turbo Dsl 3-cyl 952cc
(All 4200VXD engines are Liquid-cooled)
Drive
Dimensions
All wheel drive (AWD)
Turning Radius
43 inches
A Full Complement Of Attachments Are Available
OVER 40 TO CHOOSE FROM!
CALL FOR DETAILS & DEMONSTRATION
Get attached - Get it done!
VENTRAC MOUNT SYSTEM
This easy-to-use connection gives the operator the
advantage of connecting and disconnecting to a variety
of Ventrac designed attachments with ease and speed.
• Single lever quick release
• Slide on attachment rails
• Quick and easy PTO connection
• “Quick Couplers” for hydraulic hoses
• Optional dual wheels for 30° continuous side hill operation
Wheelbase: 43 in.
Length: 77 in.
Overall Height: 67 in. (to top of rollbar)
Width: 49 in. (w/single turf tires)
70 in. (w/dual turf tires)
TACKLE THE IMPOSSIBLE!
Get maximum angle of operation with the
Ventrac 4200VXD, approved
for 30° continuous
operation, when
equipped with
dual wheels.
HEAVY METAL (HM) SERIES
44
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: info@oescoinc.com
LE 3100/3200 ...
Good things come in small packages
These power-packed units feature all-wheel-drive, power steering,
hydrostatic drive, and more. The Ventrac Mount System allows you
to change attachments quickly and efficiently, moving from job to
job with minimal effort.
Also standard on the 3100 & 3200
is Ventrac's patented S.D.L.A.
control, which allows for easy
command of speed, direction,
lift and auxiliary function all with
one hand.
Combine these features with a
tight 28" turning radius and you
will find the 3100 & 3200 can
tackle jobs reserved for much
larger, less maneuverable machines.
STANDARD FEATURES:
• All wheel drive
• Hydrostatic drive
• Articulating/oscillating frame
• S.D.L.A. controls
• Foot pedal
Shown with optional cab
3100: 21HP V-twin air cooled engine, gas OR 3200: 23.6HP Liquid cooled engine,
VENTRAC - COMPACT TRACTORS
Equipped with a patented Tandem
Drive train, the 3100 & 3200
efficiently transfers power to
where it's needed for unparalleled
performance and power.
OPTIONAL FEATURES:
• Knobby tires
• Weight transfer (standard on 3200)
• Tilt steering (standard on 3200)
• 12 volt power supply/switch control
• Suspension seat
• Roll bar
• Tractor cab
Over 20 attachments available
4100 ... As Individual As You Are
The Ventrac 4100 is designed and built with the same inherent quality, versatility,
safety and control as the 4200VXD. Equipped with a powerful V-Twin 31 HP
Air-Cooled engine and driven by Ventrac’s high efficiency hydraulic drive system.
4131
Engine
31 HP Kawasaki Gas (Air-cooled)
All wheel drive (AWD)
Drive
Dimensions
Turning Radius
Wheelbase: 43 in.
Length: 77 in.
Overall Height: 67 in. (to top of rollbar)
Width: 48 in. (w/single turf tires)
70 in. (w/dual turf tires)
43 inches
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: info@oescoinc.com
45
ZMT
Offset in-line slope mowers
For Agriculture and Roadside
Tractors from 50 - 80 HP
Ferri offset flails work well for long reach or
ditch bank mowing. Flails lift to 90° vertical or
down to -50°. Safe and perfectly balanced,
these machines allow for careful working even
in difficult situations. ME and MT mowers for
grass and light brush include adjustable rear
roller, internal sealed rotor bearings, double
skin and cast iron gear box.
ZMT160 — 50-60HP, 5'3" cut width
ZMT180 — 60-70HP, 5'11" cut width
ZMT200 — 70-80HP, 6'7" cut width
ZME
Offset in-line slope mowers
FLAIL MOWERS
Specifically designed for
compact tractors
ZME125 — 18-30HP, 4'1" cut width
ZME155 — 25-40HP, 5'1" cut width
MT
Mowers
For mowing grass and twigs
MT140 — 30-45HP,
MT160 — 35-50HP,
MT180 — 45-60HP,
MT200 — 50-70HP,
4'7" cut width
5'3" cut width
5'11" cut width
6'7" cut width
Flail Choppers
3 pt. hitch PTO chopper is very heavily constructed complete
with: rear roller, belt drive through H.D. gearbox, H.D. 5 lb.
flails, adjustable cut height 3/4" - 4 3/4", parallelogram hitch.
Brush rake and swinging rotary mower arm optional.
Model
ME
Mowers
For mowing grass
ME125 — 20-25HP, 4'1" cut width
ME155 — 25-30HP, 5'1" cut width
46
Cut Width
Offset from Center
Min. HP-Grass/Brush
Weight-Lbs.
BG-180
5'11"
4'10"
35/45
1280
KG-220
7'3"
6'2"
40/60
1480
Other widths available. Call for more information.
Parts and service for all Perfect mowers and shredders.
Call or write for specific information on Perfect equipment.
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: info@oescoinc.com
OMF-750 SERIES
REARS
• Super-duty low profile
Flail Chopper
• 2 3/4 lb. hard faced hammers
mounted on 3/4" Grade 9 bolts
with 1 1/2" mount pads
• 2.4375" spherical roller main bearings
• Double wall housing 3/8 liner under 3/16 skin
• 24" hydraulic offset standard
• Floating top link pad
• Cutting width from 4'-9'
• Heavy duty - 6'-2,154 lbs., 7'-2,350 lbs., 8'-2,550 lbs.
• Options: Push/pull mount
REARS FLAIL MOWERS
The Series 750 OMF flail uses
a double row spherical roller
bearing with oversize rollers
and an eccentric locking
collar. This rotor bearing is
nested in a labyrinth
grease seal.
OMF Flail Hanger
SPF FLAIL MOWER
• For the lowest horsepower available in
tractor restrictive plantings. Ideal for cane,
berries, Christmas trees, ski resorts,
parks, golf courses, nurseries.
• 3-point mount, centered or offset.
24 to100 inch cutting widths.
• Options: Low-profile unit. Hydraulic
offset. Front mount unit. Push/pull mount.
Right hand drive. Narrow vineyard profile
• 0 to 6 inch cutting height.
A
A
B
C
A - left hand drive, fixed right offset
B - left hand drive, fixed center mount
C - left hand drive, hydraulic pantograph
B
C
A - FL920 Super-TUF hardened grass blade
assembly for a finish cut
B - FL960 shredding knife assembly for a
coarse cut in grass and for shredding light
brush
The FL920 and FL960
blade assemblies are
easily replaceable without a wrench or socket.
Simply turn the D-ring
hanger and slip off the
blade.
Call, email or write for
specific information on
any flail mower.
C - FL940 crop chop knife for heavy
mowing and brush shredding
REARS FRONT MOUNT
Run the slopes with Rear’s Front
Mounted Pak-Flail. Pak-Flail mows
grass, eats brush and small trees.
Leaves a covering of mulch, an
ideal light bedding easily covered
by the first snow.
Call about the availability of rebuilt equipment
as an economical option to new!
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: info@oescoinc.com
47
SL
Manufactured in Italy
ORCHARD/FINISH MOWERS
Model
Main Deck Min. Tractor
Spindles
HP
Min.
Width
Max.
Width
Weight
(lbs.)
SL2-160-210
2
30
64"
84"
770
SL3-180-230
3
30
72"
92"
814
SL3-200-250
3
40
80"
100"
858
SL3-230-280
3
40
91"
110"
924
SL4-270-320
4
80
108"
128"
1100
SL4-310-380
4
60
122"
142"
1188
Fischer's SL Series orchard
mowers are rugged, compact and
low profile. They are ideal for
low-hanging fruit. The swing arm
is available in either mechanical or
hydraulic sensing retract. The
hydraulic sensing style uses the
tractor hydraulics to set the width,
then the self contained sensing
system moves the arm around
even the smallest trees with no
damage. All SL models include
30" hydraulic linear side shift.
SITREX Finish Mowers
SERIES RF ROTARY
MOWERS
3 pt hitch with swing arm.
Low construction to clear fruit
branches, parallelogram for
offset adjustment, front swivel
wheels to adjust to terrain,
large rear roller, swing arm
to cut around tree trunks.
Hydraulic offset, swing blades,
feeler bar, all optional.
NEW
RF-220 3pt w/ Cutting Width 7'3"
Specifications: Right offset only
Model
RF-220
RF-300
Cut Width
Offset from Ctr.
Min. HP
Weight-Lbs.
7'3"
7'1"
22
905
9'10"
8'4"
30
1135
SERIES ZA ROTARY
MOWERS
Trailed rotary mower with swing
arm. Trailed from the drawbar on
the tractor, these machines are
capable of large offset. Two large
tires and one swivel support
mower to give high quality cutting.
Swing arm cuts easily around fruit
tree trunks. Lengthways transport
featured for large machines.
ZA 300 Rotary w/ Cutting Width 9'10"
Specifications: Left offset only
Model
ZA-300 ZA-340
Cut Width
Offset from Ctr.
Min. HP
Weight-Lbs.
48
9'10"
9'1"
30
1115
L Series - Side discharge
Sitrex three spindle
finish mowers.
11'2"
10'10"
35
1230
NEW
• Two versions: rear discharge and
side discharge, suitable for parks,
golf courses, athletic fields,
highway maintenance & farming.
• 12-40HP
• Fully floating 3pt. hitch to obtain
best cutting finish, even on
undulating ground
• All rear discharge models are
fitted with safety chains
P Series - Rear discharge
ZA-380
12'6"
11'10"
40
1345
Model
Cut Width
Cut Height
HP Required
SM 120 L/P
48"
1"-4"
12-20
SM 150 L/P
60"
1"-4"
15-30
SM 180 L/P
72"
1"-4"
20-40
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: info@oescoinc.com
Model
Manufactured in Italy
GL
Spindles Min. Tractor Min.
HP
Width
Max.
Width
Weight
(lbs.)
GL4/50-130-215
4
30
51"
85"
660
GL4/60-140-245
4
30
55"
96"
704
GL4/60-180-280
4
40
71"
110"
858
GL4/70-180-300
4
40
71"
118"
891
GL4/80-200-340
4
50
79"
134"
1056
GL4/90-220-380
4
60
87"
150"
1177
ORCHARD/VINEYARD MOWERS
The Fischer GL4 features two precisionsensing hydraulically-controlled swing
arms, a self-contained hydraulic system
and height adjustable rollers, making it an
ideal mower for vineyards, tree plantations,
nurseries and high-density orchard
plantings. The GL4's ability to mow
carefully within the row is particularly
helpful to growers whose management
program does not include the use of
herbicide strips. Available in a wide range
of sizes.
Pictured with optional Herbicide Kit.
Manufactured in Italy
BV
Model
The BV2 is a versatile mower for fruit plantings of all types — tree fruit,
grapes or berries. The BV2 features a continuously variable hydraulic
width adjustment as well as hydraulic side-shift. It is an ideal machine
for variable width plantings where the management plan incorporates
herbicide strips.
Spindles Min.Tractor Min. Width
HP
Max.Width
Weight
(lbs.)
BV2-110-145
2
30
43"
43"
660
BV2-125-175
2
30
49"
69"
748
BV2-145-195
2
40
57"
77"
863
BV2-160-230
2
40
63"
91"
1078
BV2-190-260
2
50
75"
102"
1232
Fischer BV2 Features:
NEW
• 3 pt hitch mount
• Hydraulic width adjustment
• Hydraulic side shift
• Three over-sized cast gearboxes
• Heavy duty steel plate deck
• Two counter-rotating blade rotors with four
swing-mounted mower blades
• Chain guards, front and rear
Pictured with optional Herbicide Kit.
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: info@oescoinc.com
49
"THE ORIGINAL" SQUEALER ROTARY CUTTERS
Our BEST Selling Rotary Mower!
For light mowing on small or large areas
All made in the USA!
SQUEALER
BUSH HOG - ROTARY MOWERS
ALL PARTS AVAILABLE!!
Single Spindle
Models
SQ160
• Powder Coat Paint
• Below Deck Structure
• Rear Band
• Original Bush Hog Design
• Genuine Bush Hog Blades
• Laminated Tail Wheel
• 1" cutting capacity
• 5 Year Gearbox Limited Warranty
• Pan Type Blade Carrier
• EZ Clean Deck
• Quick Hitch Compatible
• Sidebands With Welded Skids
• EZ Lube Drivelines
• Quick Detach Gearbox Shields
• Bush Hog® Gearboxes
Squealer Squealer Squealer Squealer Squealer
142
148
160
172
184
Cut Width
42"
PTO HP required 10-25
48"
60"
72"
84"
15-20
25-40
35-45
Min. 50
SQ84T SQUEALER
with Twin Gearboxes and 9-inch offset
The SQ84T comes in a 7-foot cutting width for tractors from 35 to 50 PTO horsepower.
Reliable and durable, this model has everything that made Bush Hog famous.
SQ84T
290 SERIES Your BEST choice for medium duty cutting
296
• Cuts materials to 2"
• Extra deep 1/4" side bands
• Full length strongback
• EZ clean sloped 10 ga. decks
• 130 HP Bush Hog® gearbox
• Replaceable full length skids
• Slip clutch standard
295
296
297
5'
6'
7'
Cut Width
Min. HP
required
35 HP
45 HP
55 HP
320 SERIES Your BEST choice for heavy duty cutting
326
• Cuts materials to 3 1/2"
• Deep sidebands handle heavy volume
• Extra heavy duty hitch & tailwheel
Cut Width
assembly and wheel bracket
• Fabricated 7 ga. decks
Min. HP
• 1/4" Sidebands
required
• Deck reinforcements
• Blade pans
• Cat. 5 driveline
325
326
327
5'
6'
7'
40 HP
50 HP
60 HP
(lift)
40 HP
(pull)
406 SERIES One of the toughest cutters on the market!
The 406 is a heavy-duty mower for brush cutting, land clearing, rights-of-way and
highway maintenance. Minimum tractor HP - 60 PTO
406
50
• Cuts Material Up To 4 Inches
• Heavy Reinforced Deck
• Made For Heavy Brush Clearing
• Extra Heavy Blades
• Front Safety Chains Standard
• Fabricated 1/4 Inch Thick Deck
• 1/4 Inch Sidebands
• 3 Inch x 1 1/2 Inch x 1/4 Inch
Channel Strongbacks
• Heavy Duty A Frame And Tail
Wheel Bracket
• Extra Heavy Duty Blade Pan
• Extra Heavy Duty Bush Hog Blades
• Powder Coat Paint
• 6' Cut Width
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: info@oescoinc.com
We are very enthusiastic about this Italian picking platform!
NEW
Options:
Free wheel
device
for towing
Remote
control
Designed for efficiency, they
pick up empty bins with the
front lift and gently lower the
full bins with the rear lift.
Information needed to place
an order: row spacing, type
of planting (semi-dwarf, dwarf
on trellis, tall spindles on
trellis), bin sizes, and number
of pickers normally used.
PLATFORMS/TRANSPORTERS/DUMPERS
OESCO now offers the Pillon
line of fruit harvesting platforms.
These platforms are self
propelled, diesel powered with
hydraulic movements for the
elevation, width and leveling
of the platform. They are year
round, multiple use machines,
equipped with air compressors
for pruning. Other uses include:
thinning, trellis work and
net installation.
These machines are built to order, offering you the opportunity to customize
the unit exactly as you want it. Call to discuss your needs and receive a quote.
Transporters and Dumpers
Dump box with
3 expandable side
boards for large
loading platform
with hydraulic lift.
BRT BTR-500-HY
SPECIFICATIONS
Hydraulic dump
body with 50 gallon,
1100# capacity.
BRT BTR-500D
Engine
Honda GX160, 5.5 hp recoil start gasoline engine
Clutch
Belt driven with automatic disengagement when control lever is released
Transmission
3 forward gears and 1 reverse Mechanical – gears in oil
Speed
Speed forward 1st, .9mph; 2nd, 2mph; 3rd, 3.3mph; Reverse, .9mph
Steering
Independently controlled 28” radius minimum
Brakes
Expansion type, with automatic engagement at clutch disengagement
Ground Clearance
2.8” minimum at gearbox
Crawler Track Contact with Ground
24” long x 7” wide, 25” track width
Platform Body Adjustable side boards 40” – 48” long
BRT-500-HY
Adjustable side boards 26” – 44” wide
Capacity 1100 lbs., 50 degree tilt average hydraulic dump
Gravel Body
24” wide capacity 50 gallons
BRT-500-D
1100 lbs. hydraulic dump, 60 degree tilt average
Weight of Machine
450 lbs.
Operation
20 degree slope with load, 40 degrees without load
PTO/Hydraulic 2100 rpm / .6 gpm hydraulic flow
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: info@oescoinc.com
51
Powerful Articulated Tractor Series
for the most demanding farmers and woodlot owners
Tight turning & manuverability between rows or in woodlots
CLUSTER 70 SN
NEW
GOLDONI TRACTORS
The Cluster 70 SN is the powerhouse
of the Goldoni Articulated Tractor
Series. With a 66 HP water cooled
VM diesel engine, and a 3500 lb. 3 pt.
hitch lift capacity, the Cluster will out
perform other tractors of the same size.
The 47" minimum width lets you go where
no other tractor of this horsepower will.
EURO 45 SN
The mid-sized Euro W45SN is a powerful,
compact, yet stable tractor capable of
working well on slopes. With a 38 HP
water cooled Lombardini diesel engine,
low center of gravity and working widths
from 40" to 52", this tractor can handle
many of your toughest jobs in tight
spaces with ease.
NEW
NEW
BASE 20
The Base 20 is the most compact tractor
of the Goldoni Articulated Tractor Series.
With a width of just 32", this tractor will
go where no others will. A 21 HP air
cooled Lombardini diesel engine, 6
forward speeds and narrow profile make
this the perfect tractor for mowing, tilling
and cultivating in tight plantings.
Goldo
ni
are ava conventiona
lt
ilable b
y spec ractors
ial ord
er.
Premium Walk Behind 2-Wheel Tractors
NEW
52
JOKER 12S
The Joker 12S uses a cast
gearbox and Honda 9 HP
recoil start engine for
durability and long service
life. With 4 forward gears
and reversible handles, the
Joker can utilize other front
mount attachments, but
comes standard with their
27" adjustable tiller.
NEW
TWIST 6
The Goldoni Twist 6 has
a Honda 5.5 HP recoil
start engine, 22" tiller box
and 4 forward speeds to
give big performance in a
small package.
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: info@oescoinc.com
The Ultimate Trail and Farm Machine
RENTAL
AVAILABLE
Transcar W33SN “Syncro”
• Engine: Lombardini 2-cylinder diesel LDW1503 475kw, 33 HP,
water cooled
• Transmission: Manual shift, synchronized with 8 speeds forward
and 4 reverse
• Hydraulic service brake, double circuit acting on all four wheels
• Mechanical parking brake, acting on the rear wheels
• Power steering - articulated
• Rear standard 540 PTO
• ROPS approved rollover protection with seat belt
• Trilateral hydraulic dumping through a 4 stage sliding cylinder
• Tires: 10.0/75 x 15.3 ag tires, turf tires optional
• Body: 89”L x 59”W x 14”H
Transcar W40SN “Syncro”
GOLDONI TRANSCAR
The Goldoni Transcar is a powerful, versatile and compact
off road workhorse. With articulated steering and a 3500 lb.
load capacity, the Transcar will make small work of your
biggest jobs. From trails to construction sites to horse
farms, the Goldoni Transcar does it all.
Our #1 Seller!
• Lombardini LDW 1603 three cylinder diesel engine, 36.2 HP,
water cooled
• Tires: 10.0/75 x 15.3 ag tires, also available with turf tires
• 16 speed synchronized transmission, 8 forward and 8 reverse
with reverser
• 4 WD with rear wheel mechanical disengagement
• Differential lock—both axles—hydraulically operated
• Hydraulic brakes, double circuit, acting on all four wheels
• Hydrostatic steering—articulated
• Rear PTO—standard at 540 rpm, clockwise rotation
• Trilateral hydraulic dumping through a 5 stage sliding cylinder
• ROPS approved rollover protection with seat belt
• Body: 94”L x 59”W x 16”H
3-Way Dump: Right, Left and Back
Other models
available by
special order
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: info@oescoinc.com
53
RENTAL
AVAILABLE
Use with all kinds
of vehicles
(no steel tracks)
NURSERY CARTS/TRAKMATS
STRONG
FLEXIBLE
EASY-TO-USE
NO RUTS
NO DAMAGED LAWNS OR GROUNDS
NO WEATHER DELAYS
NO MORE DAMAGED PLYWOOD
3 Year Warranty!
TrakMats is a 1/2" thick polyethylene mat
made from 100% recycled material used to
support heavy equipment on grounds or turf.
Polyethylene is very flexible and will hold up to
60,000 pounds. No more ruts, damaged lawn
or weather delays!
3-YEAR
WARRANTY
YOU NEED A MAT SYSTEM TOUGH
ENOUGH TO DO THE JOB ...
LIGHT:
TRA TM2248 - 22 1/2" x 4' x 1/2" • 19 lbs.
TRA TM2272 - 22 1/4" x 6' x 1/2" • 29 lbs.
TRA TM2296 - 22 1/4" x 8' x 1/2" • 39 lbs.
TRA TM3696 - 36" x 8' x 1/2" • 64 lbs.
TRA TM4496 - 44 1/2" x 8' x 1/2" • 78 lbs.
The mats are UV protected and not affected by
hot or cold. The light colored mats stay cool
and are manufactured in convenient sizes to
fit the job. We recommend the width of the mat
should be at least 1/3 wider than the widest tire
on the vehicle. That gives the driver a mat size
they can stay on so the load can be distributed
to the ground. Hand cutouts are provided to
assist lifting the mat.
TrakMats will not absorb water, will not dry
rot and are not affected by oil, gas, or other
chemicals. No more heavy, wet, rotten, broken,
slippery plywood! Guaranteed against cracking
and breaking for 3 years from date of purchase.
To clean, simply wash with water.
W.W. Manufacturing Company, Inc.
BLACK (for use in mud conditions or where
damage to lawns is not a concern):
TRA TM2248B - 22 1/2" x 4' x 1/2" • 19 lbs.
TRA TM2272B - 22 1/4" x 6' x 1/2" • 29 lbs.
TRA TM2296B - 22 1/4" x 8' x 1/2" • 39 lbs.
TRA TM3696B - 36" x 8' x 1/2" • 64 lbs.
TRA TM4496B - 44 1/2" x 8' x 1/2" • 78 lbs.
GO FOR CART
Large H.D. deck
27"x60", deck cover
expanded metal,
deck height 20", two
Standard sizes available: 4'x8' (WWM 87),
swivel pneumatic
5'x8' (WWM 90), 4'x10' (WWM 88), 5'x10' (WWM 91), wheels front, 2-16"
5'x12' (WWM 92) and 6'x12' (WWM 93)
fixed pneumatic
Other sizes special order. Freight only.
wheels rear. Carrying
capacity 600 lbs.
TRACKING WAGONS (TRAILERS)
SERVICE CARTS
(WAGONS)
Heavy duty carts for garden
centers or nurseries. 600 lb.
capacity. Pneumatic tires,
expanded metal deck, 4"
high railing. Two sizes.
WWM 81 - 28"x48" deck
WWM 82 - 24"x36" deck
WWM 78
Tree/Ball Carts
• Drawbar with Clevis hitch (folds for storage)
• Expanded metal deck
• Front axle parking brake applied when drawbar
is raised/stored
• Heavy steel construction with angle iron
• Rear hitch for next wagon drawbar
• Both axles steer
• High speed wheels, bearings, hubs and axle pivot points.
To order: Call for quotation.
Options include multiple decks.
54
Heavy duty welded steel
tube standard with wide
floatation tires, two sizes
24" and 36" ball size. Truck
freight only.
24" ball 25" frame width, 29" overall 1" axle,
16x6.5x8 tires, 1000# cap.
WWM 224F
36" ball 30" frame width, 38" overall, 1" axle,
16x6.5x8 tires, 1000# cap.
WWM 230F
BAR B7-BW
BAR B3-4C
Pack-It Tree/Goods Carrier
BAR B3-4C - 68" x 68", 2-4 person carrier • 6.25 lbs.
BAR B7-BW - 49", 2 person carrier • 2.8 lbs.
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: info@oescoinc.com
Model RI
A tough versatile landscape
rake for Category 1 or 2
tractors, 35 HP and up
Call for information on all these Bush Hog items
2100 Series Post
Hole Diggers
Quick Hitch
Compatible!
Three models available.
Cat 1 or 2 mounting, 48"
digging depth, 6"-24"
augers.
2103
NEW
2101
2102
6' - 10'
HP Rating
35 HP and up
35 Series Blade
Hitch
Cat. 1or Cat. 2
3 pt. or quick
Available in 4, 5, 6 and
7 foot operating widths.
Caster Wheels
Optional, Pneumatic (6")
Cutting Edge
Optional, Replaceable Cutting Edge
End Boots
Optional
Scarifier
Optional, 10 heat treated, reversible,
alloy steel points, 72" wide
MBX Series Box Rakes
60" - 96"" widths
70 Series
Blade
Model FM
Available in 6, 7,
and 8 foot
operating widths.
Put a front mount rake
in place of your snowplow!
LLR & MLR Series
Rear Rakes
Light and medium Duty
NEW
60" - 90" widths. For tractors up to 50 HP.
BUSH HOG
Backhoes are
available in
tractor factory
colors
BUSH HOG
Front end loaders.
Available in
factory colors
MODEL
Fits Hitch
(Snowplow)
LAND PREPARATION
Max. Raking Width
007518 007528 007538 007548 007568
Fisher Western Diamond Meyers
Boss
Max. Raking Width w/extension down: 11'
Clear more brush!
Max. Raking Width w/extension up: 90"
Caster Wheels
Worksaver Grapples designed for tractors
that are equipped with a front loader.
2 sizes available.
Standard, 13/6.50 x 6 Pneumatic tires
with high speed bearings
Maschio Rotary Tillers
NEW
The Maschio Rotary Tillers have provided a strong reliable tool for over 40 years to the
agricultural market. Available in a wide variety of sizes. Contact us for details.
Other models available to 10' widths
NEW
NEW
W Series
41"-52" width
H Series
65"-81" width
U Series
63"-93" width
Single speed, chain drive, adjustable offset mast
Single speed, chain drive, fixed mast
4 speed, grear drive, fixed mast
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: info@oescoinc.com
55
REARS
PAK Fork
REARS
The “All-Around-Farm-Tool”
FORKS/SNOWBLOWERS/GROOMERS
• Constructed from 2"X4"
rectangular tubing
• 3 pt. hitch Cat. 1
• Transport fork
• Hooks up FAST
• 26" wide
• 44" load length
• Weight: 98 lbs.truck freight
• 1000 lb. capacity
PAK-STAK
Hydraulic fork lift attachment.
Available in 3 pt. hitch or
subframe mount. 84" - 94" lift
height. Fixed or hydraulic tilt.
BEST
SELLER!
REA PAK-STAK
Use it to haul pallets of fencing, fence posts, hay and feed. Transport tote
boxes of fruit and vegetables. Move irrigation pumps and small buildings.
The list goes on and on ... that's why it’s called the “All-Around-Farm-Tool”!
Clamp-On Bucket Forks -
REA PAKFORK
Models BF-1000, BF-2000, BF-3000, BF-4000,
and BF-6000
Available in 5 models from
1,000 to 6,000 lb. capacity.
Mounts in seconds without
tools, equipped with handles
for easy mounting, adjustable
handles and safety rated at
twice the capacity.
• Expand machine usage
• No hardware or chains needed
• Adjustable tine spacing
• Attaches in seconds
• 7 sizes
• 2,500-22,000 lb. capacity
CTI produces forks which adapt
to the loader bucket of a farm
tractor, backhoe or industrial
loader eliminating the need for a
separate forklift. These forks are
solid steel attached by welding
brackets to the bucket top lip. A
connecting bar holds the tines and when the bucket is rolled back, the forks
are attached. The tines adjust, no hardware or chains are necessary - and
they attach in seconds! Call for more information. See price list for models.
TT4800 and TT4900
Universal Lifts
• Designed for easy on-off
• Convenient operation to
any Cat. 1 or 2 three-point
hitch tractor
• Top link adjustable 22"- 28"
3-point TRANS-PORTER
Cat. I, 3 pt. hitch. Low cost carrying device designed to lift bulk
bins, feed, baled hay - almost anything including other implements.
• Lifting height - up to 16"
• 46" solid steel forks
• Tilts 10° at maximum lift height
EDW TP6412 - 1500 lb. capacity
For more models and detailed information please contact us.
SPIN GROOMER
Conditions and levels arena surfaces. Spins as you pull it. Levels at the
edges. 4 sizes: 5-8 foot diameters. Adjustable with just one moving part.
Bolt on hardened tines.
BLIZZARD
NEW
Agricultural Snowblowers
48"-94" width, for 15-75 HP
tractors. Manual or
hydraulic rotation.
Contact us
for details
and options
With attachable rake
56
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: info@oescoinc.com
ACCURATE AND PRECISE
3 PT. AND PULL SPREADERS
EUROPEAN MANUFACTURED VICON SPREADERS
Super Flow spreaders from Vicon fulfill all requirements for a
long service life. The glass fiber reinforced polyester hopper
and stainless steel meter disc is unaffected by aggressive types
of fertilizer. The
spreading unit and
frame use the unique
Duracoat Powder
painting system for
exceptional corrosion
resistance. The
bearings of the
spreading unit have
easily accessible
grease fittings for
maximum ease of maintennance.
The spreader is shipped with one standard broadcast spout. Many
spout options are available for banding and narrow spread patterns.
Call for options like covers, agitators, and hydraulic controls.
NEW
Vicon Maquinas
Agricolas Itda.
sitrex SPREADERS
2 Pull Models available
The Economical Option
Manufactured in
South America.
Heavy fiberglass hopper
with (non-adjustable
pendulum), spreads up
to 39' wide.
FSP 100
Optional spouts available.
It is important to know
that this is NOT the
same spreader as the
European Vicon Spreader.
Options and parts are different.
Spreaders for
green areas and
garden use. The
FSP series
spreaders are
designed to be
used on small
tractors, utility
vehicles and
ATV's without
PTO shaft. These
spreaders can be
used for spreading
fertilizers, sand or
salt depending on
the needs of the
user.
FSP 150
Model
Hopper
cap.
Max.
load
cap.
Width of Overall Hopper
spread height
width
pattern
SIT FSP-100
26.5
gallons
264
lbs.
2.2-6.5
yards
40"
32"
SIT FSP-150
38
gallons
352
lbs.
2.2-6.5
yards
42"
36"
Models and capacities. Shipped with standard spout.
Model Number
Capacity
VMA PS 303
VMA PS 403S
VMA PS 503S
660 lbs.
880 lbs.
1,100 lbs.
Weight Empty
Width X Height
187 lbs.
240 lbs.
253 lbs.
3.4' x 3'
4.7' x 3.2'
4.7' x 3.6'
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: info@oescoinc.com
57
Unsurpassed Mulching Versatility
The Crop Care™ Row Mulcher by Lanco lets you apply mulch
in a wide range of applications. You can apply a pattern that is
up to 48" wide and 1/2" deep, or 12" wide and 8" or more deep,
depending on material conditions and travel speeds.
By
ROW MULCHERS/ SPREADERS
• 5.4 yards, heaped 6000 lb. cap.
• 30 HP tractor
required
• 96" Hopper length
• 36" Hopper width
• Fully adjustable
tilting conveyor
• Dual directional
delivery system
• Mulch from both
sides
• Body: 12 gauge
Cross beam supports. Poly
galvanized steel
Model LS-1450
Standard
features:
lumber deck has a 10 year
warranty. Allows almost any
kind of material.
• 2-way conveyor
• PTO Hydraulic
drive
• Fine chain
• Manual endgate
RENTAL
AVAILABLE
Tilt control dual
directional belt
Other models and capacities available
NEW
5-in-1 SUPER
SPREADER
Other options available
INTERCHANGEABLE SPREADER ATTACHMENTS
The Lanco 5-in-1 Super Spreader is a state
of the art spreading machine for spreading
many kinds of material. The 5-in-1 features
interchangeable spreader attachments,
2.4 yd. (65 ft.) capacity, drive via tractor
Hyd (requires 8 GPM), net weight 2,300 lbs.,
maximum payload 8,300 lbs., W 67" x H 70",
Length 157", Apron Chain with 3-1/2" slat
opening spacing, rack and pinion end gate,
and agricultural rib tire (11L x 15, 8 ply)
58
LCO BT01
Beater Attachment - For straw manure
LCO BR01
Brush Attachment - For top dressing turf (sand or mulch)
LCO CC01
Cross Conveyor (L or R) Crescent Belt - For row mulching
LCO CC30
Cross Conveyor Dual (L & R) w/2 CC20 Deflector Kit Used for row mulching (L and R at the time)
LCO DD01
Dual Disc Attachment - Used for fertilizers and compost
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: info@oescoinc.com
Download PDF

advertising