AIR CONDITIONING SYSTEMS Natural Comfort for Everybody COMFORT TAKES ON NEW MEANING WITH THE POWER OF TECHNOLOGY Our technologically advanced Mr. Slim Power Inverter systems improve comfort, operate with significantly less noise, .... and provide increased energy savings. NEW REFRIGERANT Our air conditioners use R410A, HFC refrigerant. 01-02 Advanced Power Inverter Advanced Power Inverter Silent Operation Mitsubishi Electric’s new Power Inverter systems drastically reduce power consumption Technological Improvements for Super Quiet Operation To better meet the needs of shops and offices, our outdoor units are now offered in three-phase power supply models in addition to the existing line-up of single-phase models. Select the model to best match your needs from our expanded model range. Exceptionally Quiet Operation: Top Class in the Industry Newly designed fan blades and grille shape realise ultra-quiet operation. In low-noise mode, which activates automatically when the outside temperature drops, Power Inverter units are even quieter, with operating noise reduced by 3dB. Low-noise Priority Function A low-noise priority function is available when a commercially available timer or selection switch is connected. When a signal is received from the timer or switch, the unit begins running in the low-noise priority mode. (The switch must be set when installed.) PUHZ-RP/100/125/140 /170/200 R22 model 1/2 noise DAY NIGHT 1/3 noise 52dB 47dB (during cooling mode) R22 (during cooling mode) R410A Non-inverter units PUHZ-RP71 44dB (during cooling mode) Inverter units (PUHZ-RP) Normal Low-noise Mode 71class 52 47 44 100class 54 49 46 125class 55 50 47 140class 56 50 48 *Sound pressure level (dBA) Longer Maximum Piping Length As a result of increasing the volume of refrigerant, piping length has been increased to a maximum of 75m, expanding the range of layout possibilities for unit installation. PUHZ-RP250YHM-A Max.piping length 71 Single-phase Three-phase 100 125 140 170 200 250 can be stretched to 75m Max.height difference Max.piping length PUHZ-RP71 30m 50m PUHZ-RP 100/125/140/ 170/200/250 30m 75m Outdoor Line-up (PUHZ-RPseries) High Energy Efficiency High Power More Power for Faster Cooling/Heating Improved EER/COP The latest inverter technology improves the energy efficiency of heating/cooling operation from the previous model, realising further reductions in power consumption. 3.40 3.20 19% 3.33 The maximum operating speed and cooling/heating capacity of the new Mr. Slim Power Inverter units have been improved by as much as 33% (compared to conventional non-inverter models) when operating in either low or high outdoor temperatures. UP 33% 3.10 Improved Cooling/Heating Performance Cooling capacity UP 3.00 R22 Non-inverter 2.79 2.80 2.60 2.40 PEA-RP 170WGA PUHZ-BP 170YHA PEA-RP 170WHA PUHZ-RP 170Y(V)KA PEA-RP 170WHA PUHZ-RP 170Y(V)KA Cooling PEA-RP 170WGA PUHZ-BP 170YHA 71 7.7 8.1 105% 100 9.7 11.4 118% 125 12.4 14.0 113% 140 14.0 15.3 109% Heating capacity R22 Non-inverter Heating 4% 3.40 3.20 R410A Power inverter max. (PUHZ-RP) 2.33 2.20 2.00 4way cassette 23% 3.19 UP 3.25 UP 3.12 3.00 R410A Power inverter max. (PUHZ-RP) 71 8.4 10.2 121% 100 10.4 14.0 135% 125 14.0 16.0 114% 140 16.1 18.0 112% 2.80 2.60 2.60 Wider Performance Range Operation is now possible at lower speeds, thus cutting energy losses produced by the repeated On/Off operation of non-inverter models. Comfort is improved while power consumption is reduced. 2.40 2.20 2.00 PEA-RP 200WHA PUHZ-RP 200YKA PEA-RP 200WGA PUHZ-BP 200YHA PEA-RP 200WHA PUHZ-RP 200YKA Cooling PEA-RP 200WGA PUHZ-BP 200YHA Cooling capacity ranges Heating 71 class 3.3-8.1 kW 100 class 4.9-11.4 kW Comparison of EER(cooling mode) 125 class 5.5-14.0 kW Comparison of EER between non-inverter and Power Inverter (4-way cassette) models. EER Average 42% increase 3.40 3.5 57% 140 class 5.5-15.3 kW 0 2 4 6 8 UP 16 18kW 16 18kW 71 class 3.5-10.2 kW 39% 3.01 UP 3.0 100 class 4.5-14.0 kW 22% 2.22 2.33 UP 125 class 5.0-16.0 kW 2.47 2.17 Power Inverter Model 14 Heating capacity ranges 3.23 49% 71class 12 3.31 UP Outdoor Unit 10 140 class 5.0-18.0 kW 100class 125class 140class Non-inverter Model 0 2 4 6 8 10 12 14 03-04 Advanced Power Inverter Advanced Energy-saving Technologies Advanced Technology for High Efficiency Highly efficient fan and grille for outdoor unit Numerous Leading-edge Technologies Assure High Efficiency The shapes of the fan and grille of the outdoor unit were redesigned, realising an increase in blowing capacity and more efficient heat exchange while maintaining the same operating noise level. Outdoor unit fan opening increased <PUHZ–RP170/200> The diameter of the opening for the fan in the outdoor unit has been increased from 490 to 550mm. Blowing capacity has been increased while maintaining the same fan rotation speed. Reluctance DC Rotary Compressor (PUHZ-RP71) The reluctance DC motor has a rotor equipped with powerful neodymium magnets. The magnetic torque produced by the neodymium magnets and reluctance torque results in more efficient operation. DC compressor motor (rotor) Neodymium magnets Magnetic torque + Reluctance torque Opening increased from 490 to 550cm in diameter Highly Efficient Scroll Compressor (PUHZ-RP100/125/140/170/200) Grille shape changed <PUHZ–RP170/200> The shape of the air outlet grille has been changed to reduce pressure loss. This has helped improve heat exchange performance. Higher efficiency has been achieved by adding a frame compliance mechanism to the DC scroll compressor. The mechanism allows movement in the axial direction of the frame supporting the cradle scroll, thereby greatly reducing the leakage and friction loss, and ensuring extremely high efficiency at all speeds. Fixed scroll Leaking loss :minimum Thrust gas power: minimum Thrust friction loss :minimum Secondary back-pressure chamber minimizses thrust friction loss. Inflexed fan <PUHZ–RP170/200> Adoption of a fan with improved ventilation characteristics and a newly designed rear edge that suppresses wind turbulence raises fan operation efficiency. Frame Cradle scroll Primary back-pressure chamber minimizses leaking loss. Fan rear edge DC Fan Motor (PUHZ-RP71/100/125/140/170/200) Highly efficient heat exchanger A high density and increase in surface area have improved the heat-exchange efficiency of the heat exchanger. High-density heat exchanger <PUHZ–RP170/200> The pipe diameter has been changed from 9.52 to 7.94mm, resulting in a high-density heat exchanger. A highly efficient DC motor has been installed to drive the fan of outdoor units, realising up to 60% higher efficiency when compared to an equivalent AC motor. Vector-Wave Eco Inverter This inverter monitors the varying compressor motor frequency and creates the most efficient waveform for the motor speed. As a result, operating efficiency in all speed ranges is improved, less power is used and annual electricity costs are reduced. Smooth AC wave pattern 2 lines, 52 columns 2 lines, 64 columns (RP170) Heat-exchange surface area increased <PUHZ–RP170/200> The inverter has been made more compact by inserting the circuitry inside a synthetic resin molding. To ensure quiet operation, soft PWM control is used to prevent the metallic whine associated with conventional inverters. Sine-wave drive soft PWM Heat exchanger size extended horizontally, increasing the surface area. Increase in heat-exchanger surface area Heat exchanger Heat exchanger Power Receiver and Twin LEV Control (PUHZ-RP71/100/125/140/170/200) Mitsubishi Electric has developed a power receiver and twin linear expansion valves (LEVs) that optimise the performance of the compressor. By ensuring optimum control in response to the operating waveform and outdoor temperature, this technology is tailored to the characteristics of the new refrigerant to enhance operating efficiency. Dot Liquid-crystal Display Adopted The adoption of dot liquid-crystal display (LCD) technology and a large display screen for the control panel optimises visibility. Operation and control status are easily read at a glance. Display example [operation mode] Easy to Read/Easy to Use Industry First! Multi-language Display Dot liquid crystal display section MultiIanguage Operations can be shown in eight languages. The display can be switched easily to any of the compatible languages. [English] [Spanish] [Italian] [German] [French] [Russian] [Chinese] [Japanese] Energy-efficient Control Operation Control Function Limited Temperature Range Settings Air conditioner operation restricted to within a specified operating range COOL / DRY 19 (˚C) 30 (˚C) Possible temperature range setting 25 (˚C) 30 (˚C) Lower limit temperature The upper and lower limits for the temperature range during operation can be set. This prevents excessive heating or cooling, leading to increased energy savings. Auto-off Timer Automatically turns off air conditioner To prevent excessive cooling Lower temperatures cannot be selected. Recommend for use in Office Restaurant * The “Simple Timer,” which can be set at one-hour intervals, is set at the time of shipment from the factory. It can be changed to the “Auto-off Timer” function using the remote controller. Recommend for use in Meeting room Set the time for the air conditioner to turn off automatically. The timer can be set in the range from 30 minutes up to 4 hours in 30-minute intervals. Operation Lock Prevent operation settings from being changed * Only the administrator can change settings when using the Operation Lock mode. Recommend for use in Office Public facility like public hall Units can be set so that the operation mode cannot be changed. When “Operation Lock” is activated, new temperature setting commands are not accepted, thereby ensuring that the unit runs in the specified (locked in) temperature range. This promotes energy savings and prevents erroneous or mischievous operation. School / Private school Hospital Server room 05-06 Control Technologies Easy Maintenance Function (Mr. SLIM Power Inverter only) Weekly Timer – Introduced in Response to Market Demand Control temperature on a weekly basis Temperature settings and On/Off control can be managed over a period of one week using the Weekly Timer. Up to eight setting patterns per calendar day are possible. Nearly maintenance-free operation Monitor operation data of the indoor and outdoor units via the remote controller. The remote controller also lets you set the operating frequency, allowing easier inspection. Discharge temperature 64°C PAR-20MAA conventional MA remote controller PAC-YT34STA schedule timer Conventional inspection work Indoor unit Outdoor unit Measure the intake-air temperature Remove the service panel Measure the discharge temperature Measure the outdoorair temperature Economical & Space saving PAR-21MAA remote controller Setting example (restaurant in summer time) 26 Busy time Slow time Set to lower temperature Set to higher temperature Set temperature (˚C) 25 6 Opening time 24 3 1 5 Lunch time 4 2 23 Closing time Easy maintenance information Compressor Dinner time Setting of 7 patterns 22 0 7 10 12 14 16 18 20 22 24 (Hr.) *Result of cooperative study with Japan Facility Solution Co, Ltd. Operating current (A) Outdoor unit Indoor unit 4 Heat exchanger temperature (˚C) 7 Intake-air temperature (˚C) 5 Discharge temperature (˚C) 8 Heat exchanger temperature (˚C) 6 Outdoor-air temperature (˚C) 9 Filter operating time* (hr) *The filter operating time is the time elapsed since the filter was reset. Setting the temperature 1°C higher for cooling and 1°C lower for heating results in an energy savings of approximately 10%. Approximate 10%* Energy Savings *Based on in-house calculations. Refrigerant Leakage Check (Mr. SLIM Power Inverter only) Mr. Slim Power Inverter units come equipped with a useful new “Refrigerant Leakage Check” function. Using a wired remote controller, it is easy to check if refrigerant has been lost over a long period of use. This reduces service time and gives an added sense of safety. Product Line-up 4-way ceiling cassette SLZ Compact cassette 2.5kW 3.5kW 5.0kW SLZ-KA25VA (L) SLZ-KA35VA (L) SLZ-KA50VA (L) PLA Wide Power cassette Compact bulkhead Ceiling-concealed Ceiling-suspended SEZ 6.0kW PLA-RP60BA SEZ-KD25VA (L) SEZ-KD35VA (L) SEZ-KD50VA (L) SEZ-KD60VA (L) PCA-RP50KA PCA-RP60KA PEA PCA Wall-mounted PKA NEW NEW NEW NEW SUZ-KA50VA2 SUZ-KA60VA2 Outdoor unit SUZ-KA25VA2 *SEZ/SLZ indoor units should be connected to an SUZ outdoor unit. *PKA-RP71 and PCA-RP71HA: only for PUHZ-RP outdoor connection. SUZ-KA35VA2 Product Line-up of 7.1kW 10.0kW 12.5kW 14.0kW 17.0kW Inverter Units 20.0kW 25.0kW 07-08 Remote controller See page 15 for SLZ-VAL 9 10 PLA-RP71BA PLA-RP100BA PLA-RP125BA PLA-RP140BA 15 SEZ-KD71VA (L) for SEZ-VAL NEW NEW NEW 11 PEA-RP71EA PEA-RP100EA2 PEA-RP125EA PEA-RP140EA2 PEA-RP170WHA PEA-RP200WHA PEA-RP250WHA Combination only with PUHZ-RP71 PCA-RP71HA 12 PCA-RP125HA 13 PCA-RP100KA PCA-RP71KA PCA-RP140KA PCA-RP125KA Optional Combination only with PUHZ-RP71 Optional PKA-RP71FAL PKA-RP100FAL NEW NEW NEW NEW SUZ-KA71VA2 NEW PUHZ-RP100V/YHA2 PUHZ-RP71VHA3 PUHZ-RP125V/YHA2 PUHZ-RP140V/YHA2 PUHZ-RP170V/YKA PUHZ-RP200YKA PUHZ-RP250YHM-A 14 09 4-way Ceiling Cassette PLA SERIES Advancements in PLA Series improve style and performance for ensured indoor comfort Conventional model Wide Airflow Wide-angle outlets distribute airflow to all corners of the room, ensuring the room is sufficiently cooled/heated. Horizontal airflow and a fan speed reduced by 20% compared to conventional models also contribute to increased comfort for occupants. PLA-RP ✽ ✽ BA Less Cold Draft The “Horizontal Airflow” function prevents cold drafts from striking the body directly, thereby keeping the body from becoming over-chilled. Horizontal Airflow prevents drafty feeling Independent Vane Direction Setting (i-see Sensor: optional) PLA-RP60/71 100/125/140BA Using wired remote controller, set airflow direction for each vane (manual setting also possible) Horizontal flow Use the wired remote controller to set the airflow pattern of each vane independently. Easily adjust airflow to the interior layout and seasonal conditions, and ensure an even temperature distribution all the time. Fixed Set by remote Vertical flow controller Settings can be changed anytime using a wired remote controller. Wave Airflow Mode for Heating The airflow direction at each outlet changes intermittently, providing a consistent temperature throughout the room. ● “Wave Airflow” operation image Vertical Vertical Vertical Vertical flow flow flow flow Simultaneous horizontal and vertical operation ensure a comfortable room from corner to corner ● Wave control effect thermograph Vertical flow Swing mode Temperature gap with uneven temperature distribution Temperature gap is minimised, and room is warmed uniformly Specifications: 4-way ceiling cassette (PLA) Indoor unit PLA-RP60BA PLA-RP71BA Outdoor unit SUZ-KA60VA2 SUZ-KA71VA2 Function Capacity (min.-max.) (kW) Input (kW) Rated EER/COP Cooling Heating Cooling Heating 6.1 (1.1-6.3) 6.9 (0.9-8.0) 7.1 (0.9-8.1) 8.0 (0.9-10.2) 1.87 1.97 2.07 2.19 3.26 3.50 3.43 3.65 PLA-RP60BA Indoor unit PLA-RP71BA Power supply Airflow (Lo-Mi2-Mid-Hi) Sound pressure level Dimensions Weight CMM 12-14-16-18 14-16-18-21 L/S 200-233-267-300 233-267-300-350 (dB) 28-29-31-32 28-30-32-34 Unit: 258, Panel: 35 Height (mm) Width (mm) Unit: 840, Panel: 950 Depth (mm) Unit: 840, Panel: 950 (kg) Unit: 23, Panel: 6 10 4-way Ceiling Cassette Auto Fan Speed Mode The fan speed is adjusted automatically, thereby maintaining a comfortable room environment at all times. At the start of operation, a high fan speed realises quick heating/cooling of the room. Once the desired temperature is reached, the fan speed is reduced for stable heating/cooling and greater comfort. Mi1 Mi2 Hi 360° Floor-level temperature measured throughout the room. i-see Sensor works to ensure even temperature distribution and save energy (requires optional corner panel) Fan speed setting by remote controller (four levels) Lo 4-way cassettes can be equipped with the i-see Sensor, a radiation-based sensor that monitors floor-level temperatures throughout the room to ensure room comfort. Auto ✽Special setting is required for wireless remote controller. Quiet Operation An improved airflow path and powerful highcapacity flow fan contribute to the realisation of quieter operation. Power flow fan “Pure White” Colour i-see Sensor improves energy efficiency and enhances room comfort The i-see Sensor is an innovative Mitsubishi Electric technology that uses a radiation-based sensor to monitor temperature throughout the entire room. When connected to the air conditioner control panel, i-see Sensor works to maximise room comfort through 360° sensing that covers the whole floor space. ■ i-see Sensor Operation Stylish, pure white-coloured panels and wired remote controller express a clean, streamlined image that is a suitable match for any interior. The i-see Sensor rotates 90° and takes 5-second measurements to accurately determine floor-level temperatures on all sides of the room. Other Features 90° rotation • Stylish indoor-unit vane covers (when unit is turned off) • Maximum upward draining of 850mm • Wireless remote controller available • Duct flange for Fresh-air Intake • Branch duct 5sec measurement Automatic elevation to four metres Automatic Grille Lowering Function (Option) 1.2m 5sec measurement 90° rotation 5sec measurement 5sec measurement ● The i-see Sensor calculates the temperature by measuring the infrared rays emanating from the walls and floors, and measuring the floor-level temperature. ● The sensor rotates 360-degrees once every two minutes when there is significant temperature disparity and once every five minutes when a stable, even temperature has been reached. “I Feel” Temperature Control The sensory temperature is calculated by measuring the air-intake temperature and the floor temperature. This technology makes it possible to avoid overcooling or overheating. 1.6m Easy to use/Simple maintenance An automatic grille lowering function capable of stopping at eight different heights is available to simplify filter mainElevating (up-down) controller tenance. 2.0m 2.4m Without i-see Sensor Only intake-air temperature at the ceiling is measured, resulting in uneven temperature distribution. 2.8m With i-see Sensor Both floor-level and intake-air temperatures are measured, providing operation that creates a comfortable room environment from ceiling to floor. Indoor temperature Indoor temperature detecting sensor detecting sensor 3.2m Indoor temperature Indoor temperature detecting sensor detecting sensor 3.6m Wired remote controller (optional for Auto Elevating Panel) ✽ A receiver on the elevated panel detects commands from the wireless remote controller. 90° rotation 360° sensing Area which the sensor checks 4.0m Area Areawhich whichthe the “i-see i-see Sensor” Sensor checks checks 2.7m PLA-RP71BA PLA-RP100BA PLA-RP125BA PLA-RP140BA PUHZ-RP71VHA3 PUHZ-RP100V/YHA2 PUHZ-RP125V/YHA2 PUHZ-RP140V/YHA2 Cooling 7.1 (3.3-8.1) Heating Cooling Heating Cooling Heating Cooling 11.5m Heating 8.0 (3.5-10.2) 10.0 (4.9-11.4) 11.2 (4.5-14.0) 12.5 (5.5-14.0) 14.0 (5.0-16.0) 14.0 (5.5-15.3) 16.0 (5.0-18.0) 2.09 2.17 3.02 3.10 3.87 3.88 4.65 4.43 3.40 3.69 3.31 3.61 3.23 3.61 3.01 3.61 PLA-RP71BA PLA-RP100BA PLA-RP125BA PLA-RP140BA V: Single-phase, 50Hz, 230V Y: Three-phase, 50Hz, 400V 14-16-18-21 20-23-26-30 22-25-28-31 24-26-29-32 233-267-300-350 334-384-434-501 367-417-467-517 400-434-484-534 28-30-32-34 32-34-37-40 34-36-39-41 36-39-42-44 Unit: 298, Panel: 35 Unit: 840, Panel: 950 Unit: 840, Panel: 950 Unit: 25, Panel: 6 Unit: 27, Panel: 6 Heating Heating Set temperature: 23°C without i-see Sensor Set temperature: 20°C with i-see Sensor + Auto Fan Speed 37°C 37°C 25°C 25°C 13°C 13°C 11 Ceiling-concealed PEA SERIES For elegance and style, the PEA Series compliments the room environment with aesthetically pleasing ceiling installation and a vast line-up of performance functions. Freedom in Installation Versatile and easy installation is possible; for example, it is possible to adjust the distance between the air-intake and air-outlet vents to create the optimal airflow configuration. ■ Long rectangular room ■ Room with fixed ceiling fixtures ■ L-shaped room Flexible Duct Design Enables Use of High-pressure Static Fan PEA-RP71EA/100EA2 A flexible duct design and 150Pa external static high-pressure are incorporated. The increased variation in airflow options ensures operation that best matches virtually all room layouts. PEA-RP125EA/140EA2 PEA-RP170/ 200/250WHA Easier Handling The new ducted fan coil unit (PEA-RP170/200/250WHA) now has a two-piece construction. This allows separation of the indoor unit heat exchanger and the fan deck assembly for easier handling into the roof space. Must be reassembled and installed prior to using the system. Computerised Dehumidification The fan speed is controlled electronically in dehumidifying mode, increasing the range and efficiency of dehumidification. Specifications: Ceiling-concealed (PEA) Indoor unit Outdoor unit Function PEA-RP71EA PEA-RP100EA2 PEA-RP125EA PEA-RP140EA2 PEA-RP170WHA PEA-RP200WHA PEA-RP250WHA PUHZ-RP71VHA3 PUHZ-RP100V/YHA2 PUHZ-RP125V/YHA2 PUHZ-RP140V/YHA2 PUHZ-RP170V/YKA PUHZ-RP200YKA PUHZ-RP250YHM-A Cooling Cooling Cooling Cooling Capacity (min.-max.) (kW) Input (kW) Rated EER/COP* Heating 7.1 (3.3-8.1) Heating Cooling Heating Cooling Heating Cooling Heating 2.48 2.51 3.25 3.20 4.42 4.22 5.03 4.51 5.48 6.00 5.92 6.89 7.21 8.06 2.86 3.35 3.08 3.50 2.83 3.32 2.78 3.55 3.10 3.33 3.19 3.25 3.05 3.10 PEA-RP100EA2 PEA-RP125EA CMM 22-27 27-34 34-42 48-60 50-61-72 (Lo-Mid-Hi) 58-71-84 (Lo-Mid-Hi) L/S 367-450 450-567 567-700 800-1000 833-1017-1200 967-1183-1400 Power supply PEA-RP140EA2 PEA-RP170WHA PEA-RP200WHA PEA-RP250WHA V: Single-phase, 50Hz, 230V Y: Three-phase, 50Hz, 400V Airflow (Lo-Hi) 125 External static pressure Pa Sound pressure level (dB) Height (mm) Width (mm) Depth (mm) Weight Heating PEA-RP71EA Indoor unit Dimensions Heating 8.4 (3.5-10.2) 10.0 (4.9-11.4) 11.2 (4.5-14.0) 12.5 (5.5-14.0) 14.0 (5.0-16.0) 14.0 (5.5-15.3) 16.0 (5.0-18.0) 17.0 (9.0-20.0) 20.0 (9.5-22.4) 18.9 (9.0-22.4) 22.4 (9.5-25.0) 22.0 (11.2-27.0) 25.0 (12.5-29.0) (kg) 52-55 60-75-100-150 54-58 51-55 785 1,055 1,255 1,415 72 76 690 46 59 35-38-41 37-40-43 470 428 1,370 1,120 108 * Rated EER/COP for PEA-RP170/200/250WHA are measured at ESP 75 Pa. 12 Ceiling-suspended for Professional Kitchen PC SERIES High-performance, easy-to-maintain stainless-steel units perfect for use in kitchens and modern shops Tough on Oily Smoke A durable stainless-steel casing that is resistant to oil and grease is provided to protect the surface of the body. Grimy dirt and stains are removed easily, enabling the unit to be kept clean at all times. High-performance Oil Mist Filter A high-performance heavy-duty oil mist filter is included as standard equipment. The filtering system is 1.5-times more efficient than conventional filters, thereby effectively reducing the oily smoke entering the air conditioner. The filter is disposable to further simplify trouble-free cleaning and maintenance. ■ Oil mist filter ■ Pull the handle to easily slide the filter out Easy Maintenance – Even for Cleaning the Fan A separate fan casing that can be disassembled in sections is adopted to ensure easy fan cleaning. Drain pan cleaning onsite is also easy owing to the use of a pipe connector that can be quickly removed. Bring in Outside Air for Fresher Air Conditioning (Option) The rear panel has a knock-out opening that can be used to bring fresh air into the unit. This helps to improve ventilation in the kitchen for more comfort. Cosmetic Front and Hanging Fixture Covers (Option) PCA-RP71/125HA optional Cosmetic covers are available to prevent the collection of dust and grime on the main body and hanging fixture sections. Front cover Hanging fixture cover Fresh Outside-air Intake There is a knock-out opening on the rear panel of the unit that can be used to bring fresh air into the unit. This helps to improve ventilation and make the kitchen comfortable. Knock-out opening Fresh air knock-out opening (ø200), P71 pattern: 2 places; P125 pattern: 3 places. Flexible Duct (Procured locally) Duct Flange (ø200, Optional PAC-SF28OF-E) Notes: 1) A fresh-air duct flange is required (sold separately) 2) All fresh Outdoor-air Intake option is not available. Fresh Air Knock-out Opening (ø200) Specifications: Ceiling-suspended (PC) Indoor unit Outdoor unit Function Capacity (min.-max.) (kW) Input (kW) Rated EER/COP PCA-RP71HA PCA-RP125HA PUHZ-RP71VHA3 PUHZ-RP125V/YHA2 Cooling Heating Cooling Heating 7.1 (3.3-8.1) 7.6 (3.5-10.2) 12.5 (5.5-14.0) 13.8 (5.0-16.0) 2.30 2.23 4.10 4.16 3.09 3.41 3.05 3.32 PCA-RP71HA Indoor unit PCA-RP125HA V: Single-phase, 50Hz, 230V Y: Three-phase, 50Hz, 400V Power supply CMM 17-19 30-38 L/S 283-317 500-633 Sound pressure level (dB) 34-38 Height (mm) Width (mm) Depth (mm) Airflow (Lo-Hi) Dimensions Weight (kg) 44-50 280 1,520 1,136 650 41 56 13 Ceiling-suspended PCA SERIES A stylish indoor unit design and airflow settings for both high- and low-ceiling interiors expand installation possibilities Stylish Indoor Unit Design PCA-GA A stylish square-like design is adopted for the indoor units of all models. As a result, the units blend in better with the ceiling. PCA-K A Optional Drain Pump for Full-capacity Models Drain pump installation possible Drainage outlet can be 600mm above ceiling surface The pumping height of the optional drain pump has been increased from 400mm to 600mm, expanding flexibility in choosing unit location during installation work. Ceiling surface Equipped with Automatic Air-speed Adjustment In addition to the conventional 4-speed setting, units are now equipped with an automatic air-speed adjustment mode. This setting automatically adjusts the air-speed to conditions that match the room environment. At the start of heating/cooling operation, the airflow is set to high-speed to quickly heat/cool the room. When the room temperature reaches the desired setting, the airflow speed is decreased automaticalStrong Gentle ly for stable comfortable heating/cooling Start of After room cooling/heating… temperature is stabilised… operation. Units are equipped with a knockout hole that enables the induction of fresh outside-air. optional ● Outside-air intake characteristics Static pressure (Pa) Fresh Outside-air Intake PCA-RP50/60/71/100/125/140KA 50 0 –50 –100 –150 –200 –250 –300 RP100–140 PCA-RP60/71KA PCA-RP50KA 0 1 2 3 4 Airflow volume (m 3 /min) Equipped with High- /Low-ceiling Modes Units are equipped with highand low-ceiling operation modes that make it possible to switch the airflow volume to match room height. The ability to choose the optimum airflow volume makes it possible to optimise the breezy sensation felt throughout the room. Capacity High Standard Low ceiling ceiling ceiling 50 3.5m 2.7m 2.5m 60 3.5m 2.7m 2.5m 71 3.5m 2.7m 2.5m 100 4.2m 3.0m 2.6m 125 4.2m 3.0m 2.6m 140 4.2m 3.0m 2.6m Specifications: Ceiling-suspended (PCA) Indoor unit PCA-RP50KA PCA-RP60KA PCA-RP71KA PCA-RP71KA PCA-RP100KA PCA-RP125KA PCA-RP140KA Outdoor unit SUZ-KA50VA2 SUZ-KA60VA2 SUZ-KA71VA2 PUHZ-RP71VHA3 PUHZ-RP100V/YHA2 PUHZ-RP125V/YHA2 PUHZ-RP140V/YHA2 Cooling Cooling Cooling Cooling Function Heating Cooling Heating Cooling Heating Cooling Heating Capacity (min.-max.) (kW) 5.0 (1.1-5.6) 5.5 (0.9-6.6) 5.7 (1.1-6.3) 6.9 (0.9-8.0) 7.1 (0.9-8.1) 7.9 (0.9-10.2) 7.1 (3.3-8.1) Input (kW) Rated EER/COP Heating Heating Heating 8.0 (3.5-10.2) 10.0 (4.9-11.4) 11.2 (4.5-14.0) 12.5 (5.5-14.0) 14.0 (5.0-16.0) 14.0 (5.5-15.3) 16.0 (5.0-18.0) 1.66 1.71 1.77 2.02 2.06 1.96 1.97 2.22 2.62 3.02 3.88 3.88 4.65 4.43 3.01 3.22 3.22 3.42 3.45 4.03 3.61 3.61 3.81 3.71 3.22 3.61 3.01 3.61 PCA-RP50KA PCA-RP60KA CMM 10-11-13-15 15-16-17-19 16-17-18-20 22-24-26-28 23-25-27-29 24-26-29-32 L/S 167-183-217-250 250-267-283-317 267-283-300-333 367-400-433-467 383-417-450-483 400-433-483-533 Sound pressure level (dB) 32-34-37-40 33-35-37-40 35-37-39-41 37-39-41-43 39-41-43-45 41-43-45-48 Height (mm) Width (mm) Depth (mm) Indoor unit Airflow (Lo-Mi2-Mid-Hi) Weight PCA-RP71KA PCA-RP100KA PCA-RP125KA PCA-RP140KA V: Single-phase, 50Hz, 230V Y: Three-phase, 50Hz, 400V Power supply Dimensions PCA-RP71KA (kg) 230 960 1,280 1,600 680 25 32 36 38 39 14 Wall-mounted PKA SERIES Elegant design and compact dimensions are ideal for offices, stores and residential-use Auto-flap Shutter Enhances Good Looks The Intake Grille Filter Can be Completely Removed Allowing Easy Cleaning (Can be washed in water) Filter slides out 4-way Piping Provides More Flexibility in Selecting Installation Sites Wired Remote Controller Available (Option) A separately sold wired remote controller and a terminal block are available to suit various installation sites. Drain Pump Option Available with All Models PKA-RP71/100FAL optional Installation of the drain pump enables a drain outlet as high as 800mm above the base of the indoor unit. Drain water can be discharged easily even if the surface where the wall-mounted unit does not have direct access outside, increasing the degree of freedom for installation. Indoor unit Drain pump 800mm Specifications: Wall-mounted (PKA) Indoor unit Outdoor unit Function Capacity (min.-max.) (kW) Input (kW) Rated EER/COP PKA-RP71FAL PKA-RP100FAL PUHZ-RP71VHA3 PUHZ-RP100V/YHA2 Cooling Heating Cooling Heating 7.1 (3.3-8.1) 8.0 (3.5-10.2) 10.0 (4.9-11.4) 11.2 (4.5-14.0) 1.98 2.40 2.93 3.25 3.59 3.33 3.41 3.45 PKA-RP71FAL Indoor unit PKA-RP100FAL V: Single-phase, 50Hz, 230V Y: Three-phase, 50Hz, 400V Power supply CMM 15-20 22-28 L/S 250-333 367-467 Sound pressure level (dB) 39-45 Height (mm) Width (mm) Depth (mm) Airflow (Lo-Hi) Dimensions Weight (kg) 41-46 340 1,680 1,400 235 24 28 15 Compact 4-way Cassette Compact Bulkhead SLZ SEZ SERIES Compact, ultra-quiet concealed indoor units equipped with cutting-edge control technologies for enhanced comfort Compact Designs Models with capacity ranges for any room size. The dimensions of the SLZ are perfect for 2-metre-square installations, and the SEZ unit is a slim 200mm in height, making it ideal for tight installation spaces. 990mm 700mm 208mm 200mm 650mm 650mm SLZ-KA25/35/50 SEZ-KD35/50 Impressively Quiet S Series units offer whisper-quiet operation at a hushed noise level of 23dB (SEZ-KD25/35), ensuring a calm and comfortable environment. They’re so quiet that you’ll find yourself checking to see if they’re on. ● Noise level SLZ-KA25/35/50VA (L) Subway car interior Quiet passenger car interior (40km/h) Library interior 80dB 60dB 40dB Human Sound of hearing limits rustling leaves (Extremely quiet) 10dB 23dB Quiet! Energy-saving Operation Boasting low electricity consumption, SLZ/SEZ Series air conditioners are the key to fresh, cost-effective room comfort. SEZ-KD25/35/50/ 60/71VA (L) Air Cleaning Filter for SLZ for SEZ This built-in filter removes dust and other particulates, keeping the air clean all the time. Maintenance is as simple as vacuuming. The long-life filter in SLZ Series air conditioners can be used for approximately 2,500 hours before requiring replacement. Fresh-air intake Detail drawing of fresh-air intake 25 100 A duct hole is provided in the main body, making it possible to intake fresh air from outside. 73.4 Cut-out hole 0° 120 118 3- 2.8 hole Burring hole ° Drain pipe Electrical box Refrigerant pipe Ceiling surface 12 Fresh-air Intake Specifications: Compact 4-way cassette/Compact bulkhead (SLZ, SEZ) Indoor unit Outdoor unit SLZ-KA25VA (L) SLZ-KA35VA (L) SLZ-KA50VA (L) SEZ-KD25VA (L) SEZ-KD35VA (L) SEZ-KD50VA (L) SEZ-KD60VA (L) SUZ-KA25VA2 SUZ-KA35VA2 SUZ-KA50VA2 SUZ-KA25VA2 SUZ-KA35VA2 SUZ-KA50VA2 SUZ-KA60VA2 Cooling Function Heating Cooling Heating Cooling Heating Cooling Heating Cooling Heating Cooling Heating Cooling SEZ-KD71VA (L) SUZ-KA71VA2 Heating Cooling Heating Capacity (min.-max.) (kW) 2.5 (0.9-3.2) 3.2 (0.9-4.5) 3.5 (1.0-3.9) 4.0 (0.9-5.0) 4.6 (1.1-5.2) 5.0 (0.9-6.5) 2.5 (0.9-3.2) 3.0 (0.9-4.5) 3.7 (1.0-3.9) 4.2 (0.9-5.0) 5.1 (1.1-5.6) 6.4 (1.1-7.2) 5.6 (1.1-6.3) 7.4 (0.9-8.0) 7.1 (0.9-8.3) 8.1 (0.9-10.4) Input (kW) 0.68 0.85 1.04 1.09 1.53 1.55 0.75 0.83 1.09 1.13 1.64 1.81 1.86 2.11 2.36 2.18 Rated EER/COP 3.68 3.76 3.37 3.67 3.01 3.22 3.33 3.61 3.39 3.72 3.11 3.54 3.01 3.51 3.01 3.72 Indoor unit SLZ-KA25VA (L) SLZ-KA35VA (L) SLZ-KA50VA (L) SEZ-KD25VA (L) SEZ-KD35VA (L) SEZ-KD50VA (L) SEZ-KD60VA (L) SEZ-KD71VA (L) Single-phase, 50Hz, 230V Power supply Airflow (Lo-Mid-Hi) CMM 8-9-10 8-9-11 5.5-7-9 7-9-11 10-12.5-15 12-15-18 12-16-20 L/S 133-150-167 133-150-183 92-117-150 117-150-183 167-208-250 200-250-300 200-267-333 23-26-30 23-28-33 5-15-35-50 0 External static pressure Pa Sound pressure level (dB) Height (mm) Unit: 208, Panel: 20 200 200 200 Width (mm) Unit: 570, Panel: 650 790 990 1,190 Depth (mm) Unit: 570, Panel: 650 700 700 (kg) Unit: 16.5, Panel: 3 18 Dimensions Weight 28-31-37 29-33-38 30-34-39 21 30-34-37 30-34-38 30-35-40 700 23 27 *The SLZ-KA VAL and SEZ-KD VAL come equipped with a wireless remote controller. 16 Main Features Main features of Mr. Slim Inverter Units Indoor unit SLZ-VA SLZ-VAL SEZ-VA SEZ-VAL SUZ SUZ SUZ SUZ PLA Combination Outdoor unit Energy Saving Felt Temperature Control (i-see Sensor) PUHZ SUZ Opt Opt Opt Opt PEA PKA PUHZ-HA PUHZ-HM PUHZ-KA PUHZ PCA-KA PUHZ SUZ Opt Opt Opt Opt PCA-HA PUHZ Pure White Attractive Auto Vane Fresh-air Intake High-efficiency Filter Air Quality Oil Mist Filter Long-life filter Opt Filter Check Signal Horizontal Fin (Auto Swing) Air Distribution High Ceiling Mode Auto Fan Speed Mode On/Off Operation Timer Auto Change Over *1 *3 Auto Restart Convenience Low-temperature Cooling Low-noise Operation (Outdoor Unit) Rotation, Back-up and 2nd Stage Cut-in Function Opt PAR-21MAA Control *2 Opt Opt Opt Centralised On/Off Control *2 Opt Opt Opt Opt System Group Control *2 Opt Opt Opt Opt M-NET Connection *2 Opt Opt Opt Opt Opt Opt Opt Opt Opt Opt System Control Reuse of Existing Wiring Drain Pump *4 Opt Opt Opt Opt Opt Opt Opt Opt Opt Opt Opt Opt Opt Opt Opt Opt Opt Opt Opt Installation Pump Down Switch Flare Connection *5 Self-Diagnosis Function (Check Code Display) Maintenance Failure Recall Function *1 When multiple indoor units connected to an MXZ outdoor unit are running at the same time, simultaneous cooling and heating is not possible. *2 Please refer “System Control” on page 17 for details. *3 Indoor unit DIP SW1-9 must be “ON”. *4 Only available between PUHZ-HM models. *5 Not available with PEA-RP170/200WHA models. 17 System Controls System Controls ( SUZ and Mr. Slim Power Inverter only ) Versatile system controls can be realised by using optional parts, relay circuits, control panels, etc. System examples Wired remote controller A Wireless remote controller Single-remote controller control Details Major optional parts required • Either wired or wireless remote controller can be used Standard system None PAR-21MAA (Example of 1 : 1 system) B • Up to two remote controllers can be connected to one group Dual Remote Controllers Two remote controllers, one each for local and remote control of the system PAR-21MAA • Both wired and wireless remote controllers can be used in combination * Set “Main” and “Sub” remote controllers. (Example of 1 : 1 system) C Group control MAC-397IF-E* One remote controller can control multiple air conditioners simultaneously using the same setting. PAR-21MAA * The setting of the refrigerant address is required for outdoor unit. (Example of 1 : 1 system×2) D Operation Control by level signal (12VDC ) Turn on/off unit from a remote location, prohibit/permit operation using a local remote controller Relay box (to be purchased locally) Remote control panel Operation control by pulse signal Relay box (to be purchased locally) Connector cable for remote display Connector cable for remote display Remote control panel Wired remote controller (Example of 1 : 1 system×2) Remote display of operating status PAR-SL97A-E (Example of 1 : 1 system×2) Relay box (to be purchased locally) Remote control panel F Adapter for remote On/Off Remote control panel Wired remote controller (Example of 1 : 1 system×2) E Relay box (to be purchased locally) Adapter for remote On/Off • One remote controller can control up to 16 refrigerant systems • Outdoor unit can be started/ stopped (thermostat On/Off) individually. • Up to two remote controllers can be connected • MAC-397 IF-E is required for each indoor unit if the outdoor unit is SUZ or MXZ (if the outdoor unit is P Series, no optional parts are required) • Operation other than On/Off (adjustment of temperature, fan speed, and air direction, for example) can be performed even when remote controller operation is prohibited • Timer control is possible with an external timer • Adapter for remote On/Off PAC-SE55RA-E • Relay box (to be purchased locally) • Remote control panel (to be purchased locally) • The pulse signal can be turned On/Off. • Operation/Fault signal can be received at a remote location (12VDC signal) • Connector cable for remote display PAC-SA88HA-E/PAC-725AD (10 pcs. × PAC-SA88HA-E) • Relay box (to be purchased locally) • Remote control panel (to be purchased locally) • Operation/Fault signal can be received at a remote location (when channeled through the PAC-SF40RM no-voltage signal, when channeled through the PAC-SA88HA-E 12VDC signal) • Remote display panel (to be purchased locally) • Connector cable for remote display PAC-SA88HA-E/PAC-725AD (10 pcs. × PAC-SA88HA-E) • Relay box (to be purchased locally) • Remote operation adapter PAC-SF40RM PAR-SL97A-E (Example of 1 : 1 system×2) Remote operation adapter/ Connector cable for remote display + relay box Operating status can be displayed at a remote location. Remote display panel * Cannot be used with wireless remote controller PAR-21 MAA • Remote display panel (to be purchased locally) (Example of 1 : 1 system) G • Weekly Timer: Standard functions of PAR-21MAA On/Off and up to eight pattern temperatures can be set for each calendar day (initial setting) • Simple Timer: Unit can be set to turn on/off one time each in a 72hr period; setting intervals of 1hr • Auto-off Timer: Unit turns on/off after a specified time elapses. Can be set in the range from 30min to 4hr at intervals of 30min. Timer Operation On/Off timer enabled * For the control by external timer, refer to D operation control by level signal. • Wired remote controller PAR-21MAA • Wired remote controller kit for PKA PAR-21MAAT-E • Wireless remote controller PAR-SL97A-E • Wireless remote controller kit for PCA PAR-SL99B-E PAR-21MAA (Example of 1 : 1 system) *Simple Timer and Auto-off Timer cannot be used at the same time. H Centralised control (for Power Inverter only) Centralised control of dispersed air conditioning equipment allows effective monitoring/controlling. • Mounting the adapter for M-NET connection to the outdoor unit allows MELANS (M-NET system) connection Power supply unit Centralised remote controller G-50, etc. M-NET adapter PAC-SF80MA-E (Connection with M-NET system) Centralised On/Off control (for All Outdoor Units) MAC-821SC-E Up to eight indoor units can be switched On/Off with one remote controller. Indoor unit Outdoor unit I Interlocking with Lossnay Lossnay can be controlled with a remote controller. Lossnay operation cable Lossnay Wired remote controller (Example of 1 : 1 system) MAC-397IF-E PAC-SF81MA-E • Allows centralised control by MELANS • Centralised remote controller can be connected to each indoor unit via interface. • Units can be turned on/off independently or simultaneously using a centralised controller • On/Off statues of each unit can be confirmed viewing the LED display of the centralised controller • MAC-397IF-E (Interface) • MAC-821SC-E (Centralised remote controller) • Lossnay can be connected to the indoor unit Slim-Lossnay connection cable 18 Specifications Specifications: Outdoor Unit Outdoor unit SUZ-KA25VA2 SUZ-KA35VA2 SUZ-KA50VA2 SUZ-KA60VA2 External finish Munsell 3.0Y 7.8/1.1 Power supply Single-phase, 50Hz, 230V (kW) 0.55 0.65 0.85 1.2 34 (568)/32 (534) 33 (551) 49 (818) 50 (835)/48 (800) Cooling mode 46 47 53 55 Heating mode 46 48 55 55 59 61 68 69 Compressor output Airflow (cooling/heating) Sound pressure level (dB) CMM (L /S) (dB) Sound level Dimensions SUZ-KA71VA2 Height (mm) 550 850 880 Width (mm) 800 840 840 Depth (mm) 285 330 330 53 53 Weight (kg) Chargeless piping length (m) Max. piping length (m) 20 30 Breaker size (A) 10 20 33 37 7 *Above specifications are for outdoor units only. Outdoor unit PUHZ-RP71VHA3 PUHZ-RP100V/YHA2 PUHZ-RP125V/YHA2 External finish Munsell 3.0Y 7.8/1.1 Power supply V: Single-phase, 50Hz, 230V Y: Three-phase, 50Hz, 400V (kW) Compressor output Airflow (cooling/heating) Sound pressure level (dB) 1.9 55 (920) 2.4 2.9 100 (1670) Cooling mode 47 49 50 50 Silent mode 44 46 47 48 Heating mode 48 51 52 52 (dB) 66 69 70 71 Height (mm) 943 1350 Width (mm) 950 950 Depth (mm) 330+30 330+30 Sound level Dimensions CMM (L /S) 1.6 PUHZ-RP140V/YHA2 Weight (kg) 75 Chargeless piping length (m) 30 30 Max. piping length (m) 50 75 Discharge thermo, HP switch Discharge thermo, HP switch Protection device 121 116 Rated running current (cooling/heating) (A) 8.04/9.74 V: 12.53/12.39 Y: 4.08/4.03 V: 15.53/15.98 Y: 5.04/5.20 V: 19.65/19.92 Y: 6.37/6.46 Breaker size (A) 25 V: 32 Y: 16 V: 32 Y: 16 V: 40 Y: 16 *Above specifications are for outdoor units only. 19 Specifications Specifications: Outdoor Unit Outdoor unit PUHZ-RP170VKA/YKA PUHZ-RP200YKA PUHZ-RP250YHM-A External finish Munsell 3.0Y 7.8/1.1 Munsell 5Y 8/1 Power supply V: Single-phase, 50Hz, 230V Y: Three-phase, 50Hz, 400V Three-phase, 50Hz, 400V (kW) Compressor output 6.7 185 (3,083) Cooling mode 58 58 Silent mode 56 — Heating mode 59 58 (dB) 76 — Height (mm) 1,338 1,650 Width (mm) 1,050 920 Depth (mm) 330+30 760 Sound level Dimensions 3.6 140 (2,330) Airflow (cooling/heating) Sound pressure level (dB) 3.0 CMM (L /S) Weight (kg) Chargeless piping length (m) 30 7.5 Max. piping length (m) 75 75 V: 127 Y: 131 136 200 Discharge thermo, HP switch Protection device Rated running current (cooling/heating) (A) V: 23.8/24.8 Y: 8.0/8.8 8.7/10.2 10.54/11.80 Breaker size (A) V: 40 Y: 32 32 32 *Above specifications are for outdoor units only. Notes for All Specifications Rating conditions (AS/NZS 3823) Cooling - Indoor: 27°C (80°F) DB, 19°C (66°F) WB Outdoor: 35°C (95°F) DB Heating - Indoor: 20°C (68°F) DB Outdoor: 7°C (45°F) DB, 6°C (43°F) WB Total input based on the indicated voltage (indoor/outdoor) 50Hz Refrigerant piping length (one-way): 5m (16ft.) Indoor Outdoor Single-phase, 230V Single-phase, 230V/ Three-phase, 400V Guaranteed Operating Range SUZ-KA PUHZ PUHZ 25/35 50/60/71 71/100/125/140/170/200 250 Upper limit (DB) 46°C 43°C 46°C 43°C Lower limit (DB) –10°C –15°C Upper limit (DB) 24°C 24°C 21°C Lower limit (DB) –15°C –15°C –20°C Cooling –5°C (–15°C 1) –5°C 21°C Heating 2 –11°C 1 With the optional air outlet guide, the operation at –15°C outdoor temperature is possible. 2 –11°C for PUHZ-RP71. Sound Pressure Level • Sound pressure measurements were conducted in an anechoic chamber. • The actual noise level depends on the distance from the unit and the acoustic environment. Optional Parts 20 Optional Parts Part name Model name PAC-SG59SG-E Application name Part name Model name PUHZ-RP71/100/125/140 Air outlet guide High efficiency filter Air outlet shutter plate Application name PAC-SH88KF-E PCA-RP50KA PAC-SH89KF-E PCA-RP60/71KA PAC-SH90KF-E PCA-RP100/125/140KA PAC-SH95AG-E PUHZ-RP170/200 PAC-SH51SP-E PLA-RP High efficiency filter element PAC-SH59KF-E PLA-RP PAC-SH63AG-E PUHZ-RP71/100/125/140 i-see Sensor corner panel PAC-SA1ME-E PLA-RP PAC-SH96SG-E PUHZ-RP170/200 Air protection guide Joint pipe ø 9.52 ø 12.7 PAC-SG73RJ-E ø 15.88 ø 19.05 PAC-SG75RJ-E PUHZ-RP71 PUHZ-RP100/125/140/170/200 PAC-SC84PI-E PKA-RP71 PAC-SC86PI-E PKA-RP100 Built-in wireless remote control receiver kit PAR-SA9FA-E PLA-RP Control / service tool PAC-SK52ST-E PUHZ-RP71/100/125/140/170/200 PAC-SF81KC-E PCA-RP71HA M-NET adapter PAC-SF81MA-E PUHZ-RP71/100/125/140/170/200 PAC-SF82KC-E PCA-RP125HA Multi-function casement PAC-SH53TM-E PLA-RP PAC-SG64DP-E PUHZ-RP71/100/125/140 Oil mist filter element PAC-SG38KF-E PCA-RP71/125HA PAC-SH97DP-E PUHZ-RP170/200 Power supply terminal kit PAC-SG96HR-E All P Series (excluding PEA-RP • WHA) PAC-SE90DM-E PKA-RP PAC-SC32PTA All indoor units (excluding PEA-RP250WHA) PAC-SA89TA-EP PEA-RP250WHA Remote On/Off adapter PAC-SE55RA-E All indoor units Remote operation adapter PAC-SF40RM-E All indoor units (excluding PEA-RP250WHA) Remote sensor PAC-SE41TS-E All indoor units Space panel PAC-SH48AS-E PLA-RP Wired remote controller kit PAR-21MAAT-E PKA-RP Wireless remote controller kit PAR-SL94B-E PCA-RP • KA Wiring replace kit PAC-SH52HR-E PLA-RP L-shape connection pipe Decoration cover Drain pan Drain pump Drain socket Duct flange for fresh air Filter dryer PAC-SH83DM-E PCA-RP50KA PAC-SH84DM-E PCA-RP71/100/125/140KA PAC-SH85DM-E PCA-RP60KA PAC-SG61DS-E PUHZ-RP71/100/125/140/170/200 MAC-851DS SUZ-KA25/35 MAC-811DS SUZ-KA50/60/71 PAC-SF28OF-E PCA-RP71/125HA ø 9.52 (liquid) PAC-SG82DR-E ø 12.7 (liquid) PAC-SG85DR-E Flange for Fresh-air Intake Program timer PAC-SH65OF-E PUHZ-RP71/100/125/140/170/200 PLA-RP Refrigerant Piping Capacity SUZ-KA25 SUZ-KA35 SUZ-KA50 SUZ-KA60 SUZ-KA71 PUHZ-RP71 PUHZ-RP100/125/140 PUHZ-RP170/200 PUHZ-RP250 Between indoor & outdoor units Max. height difference (m) Max. piping length (m) 12 20 12 30 30 30 30 30 30 30 20 30 30 30 50 75 75 75 Pipe size OD (mm) (in.) Thickness (mm) Liquid: ø6.35 t 0.8 Gas: ø9.52 t 0.8 Liquid: ø6.35 t 0.8 Gas: ø9.52 t 0.8 Liquid: ø6.35 t 0.8 Gas: ø12.7 t 0.8 Liquid: ø6.35 t 0.8 Gas: ø15.88 t 1.0 Liquid: ø9.52 t 0.8 Gas: ø15.88 t 1.0 Liquid: ø9.52 (3 / 8) t 0.8 Gas: ø15.88 (5 / 8) t 1.0 Liquid: ø9.52 (3 / 8) t 0.8 Gas: ø15.88 (5 / 8) t 1.0 Liquid: ø9.52 (3 / 8) t 0.8 Gas: ø25.4 t 1.0 Liquid: ø9.52 t 0.8 Gas: ø22.2 t 1.0 21 Amount of Necessary Refrigerant Amount of Necessary Refrigerant ( R410A: kg ) Factory charged Additional charged Calculation Piping length 7m 10m 15m 20m 25m 30m SUZ-KA25 0.9 0.15 0.3 0.45 — — SUZ-KA35 1.05 0.15 0.3 0.45 — — SUZ-KA50 1.6 0.06 0.16 0.26 0.36 0.46 SUZ-KA60 1.8 0.06 0.16 0.26 0.36 0.46 SUZ-KA71 2.0 0.165 0.44 0.715 0.99 1.265 Xg = 30g/m × (length-5) m Xg = 20g/m × (length-7) m Factory charged Xg = 55g/m × (length-7) m Additional charged Piping length 10 - 30m 31 - 40m 41 - 50m 51 - 60m 61 - 75m PUHZ-RP71 3.5 0.6 1.2 — — PUHZ-RP100/125/140 5.5 0.6 1.2 1.8 2.4 Factory charged Additional charged Piping length PUHZ-RP170/200 10 - 30m 31 - 40m 41 - 50m 51 - 60m 61 - 70m 10.5 0.9 1.8 2.7 3.6 *The above values apply in the case of 1:1 connections. *Please refer to the service manual for PUHZ-RP250. 22 Please note: Air conditioners in this brochure contain and operate with refrigerant R410A and synthetic oils. Before attempting any installation work you must read the installation instructions. New tools, materials and procedures are required to install these products. Under Australian Law, only persons suitably licensed are permitted to install and service air conditioning units. Refer to Country, Commonwealth, State or Territory legislation, regulations and industry codes of practice, before installation of these products. Recovery and disposal of waste material must comply with Country, Commonwealth, State or Territory guidelines. Warm, even heat in winter and cool comfort in summer is only a phone call or click away. Simply contact your nearest Mitsubishi Electric Specialist today and you can find out all there is to know about how to enhance your living environment. Our specialists are fully qualified to give you all the right advice on which Mitsubishi Electric Air Conditioning System is right for you. To locate your nearest Mitsubishi Electric Specialist go to our website www.MitsubishiElectric.com.au They will determine whether a Compact Inverter System or a Power Inverter System best suits your needs, both in comfort and efficiency. You can either visit one of our Specialist’s Showrooms, or they will happily arrange for one of their Consultants to come to your home. All Mitsubishi Electric Compact and Power Inverter Systems are MEPS (Minimum Efficiency Performance Standard) Compliant, so you can be sure that they will give you the performance and efficiency that they were designed to deliver. NOTE FOR SOUTH AUSTRALIAN CUSTOMERS: Certain models featured in this brochure may not be available for sale in South Australia. For confirmation of model availability or alternatives, contact your Mitsubishi Electric Specialist Dealer. Products in this brochure contain R410A refrigerant. Please refer to installation instructions before installation or servicing of this product. Only licensed persons and companies qualified and experienced in the installation, service and repair of products containing refrigerants should be permitted to do so. The buyer must ensure that the person and/or company who is to install, service or repair the air conditioner has the necessary licences, qualifications and experience to perform the work. Suitable access for warranty and service is required. Refer to conditions of warranty on the Mitsubishi Electric website. For future improvement, specifications, designs of product and availability are subject to change without notice. Please check with your dealer. Diamond Dealer Call Centre 1300 722 228 New South Wales 348 Victoria Road Rydalmere NSW 2116 Phone 02 9684 7555 Fax 02 9898 1043 Newcastle 271 Brunker Road Adamstown NSW 2289 Phone 02 4978 7813 Fax 02 4978 7899 L-179-7-C7654-F 1005 Printed in Australia Canberra Mobile 0408 650 822 Fax 02 6297 9067 Victoria/Tasmania Omnico Business Park Building 28 270 Ferntree Gully Road Notting Hill Vic 3168 Phone 03 9535 7800 Fax 03 9535 7801 Queensland/ Northern Territory Unit 12 469 Nudgee Road Hendra QLD 4011 Phone 07 3623 2000 Fax 07 3630 1888 North QLD - Townsville Mitsubishi Electric Office 302 Woolcock Street Garbutt QLD 4814 Phone 07 4728 5223 Fax 07 4728 5102 South Australia 77 Port Road Hindmarsh SA 5007 Phone 08 8340 2000 Fax 08 8340 0555 Western Australia Unit 5 329 Collier Road Bassendean WA 6054 Phone 08 9377 3400 Fax 08 9377 3499 Revised publication, effective May 2010. Superseding publication L-179-7-C7654-E April. 2008. Specifications subject to change without notice.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project