AEG Electrolux | 68001KF-N | Operating instructions | AEG Electrolux 68001KF-N Operating instructions

68001KF-N
Ceramic glass induction hob
Installation and Operating Instructions
Dear Customer,
Please read these user instructions carefully and keep them to refer to
later.
Please pass the user instructions on to any future owner of the appliance.
1
3
2
2
The following symbols are used in the text:
Safety instructions
Warning! Notes that concern your personal safety.
Important! Notes that show how to avoid damage to the appliance.
Useful tips and hints
Environmental information
Contents
Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
Description of the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cooking surface layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control panel layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Touch Control sensor fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Residual heat indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
6
6
7
8
8
Operating the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching the appliance on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting the heat setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching the STOP+GO function on and off. . . . . . . . . . . . . . . . . . . . . . . . .
Using the automatic warm-up function . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Locking/unlocking the control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the child safety device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching the power function on and off . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety cut-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
9
9
10
10
11
12
13
14
17
Tips on cooking and frying. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cookware for induction cooking zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tips on energy saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Examples of cooking applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18
18
19
20
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
What to do if … . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24
Installation proud of the work surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Rating Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Warranty conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Service and Spare Parts
30
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
3
Operating Instructions
1 Safety instructions
3
5
Please comply with these instructions. If you do not, any damage resulting is not covered by the warranty.
This appliance conforms with the following EU Directives:
– 73/23/EEC dated 19.02.1973 Low Voltage Directive
– 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending
Directive 92/31/EEC
– 93/68/EEC dated 22.07.1993 CE Marking Directive
Correct use
• This appliance should be used only for normal domestic cooking and
frying of food.
• The appliance must not be used as a work surface or as a storage surface.
• Additions or modifications to the appliance are not permitted.
Child safety
• Small children must be kept away from the appliance.
• Only let older children work on the appliance under supervision.
General safety
• The appliance may only be installed and connected by trained, registered service engineers.
• Built-in appliances may only be used after they have built in to suitable built-in units and work surfaces that meet standards.
• In the event of faults with the appliance or damage to the glass ceramic (cracks, scratches or splits), the appliance must be switched off
and disconnected from the electrical supply to prevent the possibility
of an electric shock..
• Repairs to the appliance must only be carried out by trained registered service engineers.
4
Safety during use
• Remove stickers and film from the glass ceramic.
• There is the risk of burns from the appliance if used carelessly.
• Cables from electrical appliances must not touch the hot surface of
the appliance or hot cookware.
• Overheated fat and oil can ignite quickly. When cooking with fat or
oil (e.g. frying chips) do not leave the appliance unattended.
• Switch the cooking zones off after each use.
• Users with implanted pacemakers should keep their upper body at
least 30 cm from induction cooking zones that are switched on.
Safety when cleaning
• For cleaning, the appliance must be switched off and cooled down.
• For safety reasons, the cleaning of the appliance with steam jet or
high-pressure cleaning equipment is not permitted.
How to avoid damage to the appliance
• The ceramic glass can be damaged by objects falling onto it.
• The edge of the ceramic glass can be damaged by being knocked by
the cookware.
• Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch the ceramic glass if pushed across the surface.
• Objects that melt and things that boil over can burn onto the ceramic
glass and should be removed straightaway.
• Do not use the cooking zones with empty cookware or without cookware.
• The ventilation gap of 5mm between the worktop and front of the
unit underneath it must not be covered.
5
Description of the Appliance
Cooking surface layout
Induction cooking zone 1800 W
with power function 2300 W
Induction cooking zone 2200W
with power function 3000W
Induction cooking zone 1200W
with power function 1500 W
Control panel
Induction cooking zone 1800 W
with power function 2300 W
Control panel layout
Heat setting selection
Power function
Cooking zone indicators
Timer function
Timer display
On/Off
with power indicator
STOP+GO
Display
Timer
Lock
6
Touch Control sensor fields
The appliance is operated using Touch Control sensor fields. Functions
are controlled by touching sensor fields and confirmed by displays and
acoustic signals.
Touch the sensor fields from above, without covering other sensor
fields.
Sensor field
TIMER
Function
On / Off
Switches appliance on and off
Increase settings
Increasing heat setting/time
Decrease settings
Decreasing heat setting/time
Timer
Timer selection
Lock
Locking/unlocking the control
panel
Power
Switching the power function on
and off
Stop+Go
To switch the Keep Warm setting
on/off
7
Displays
Display
¾
u
Description
Cooking zone is switched off
Keep warm setting
Keep warm setting/STOP+GO
function is set
¿ - Ç Heat settings
Heat setting is set
2 - 6 Heating setting plus
Intermediate heat setting is set
decimal point
a
Automatic warm up
function
Automatic warm-up function is
activated
e
Fault
Malfunction has occurred
f
Pan detection
Cookware is unsuitable or too
small or no cookware has been
placed on the cooking zone
h
Residual heat
Cooking zone is still hot
l
Child safety device
Lock/child safety device is set.
p
Power
Power function is switched on
_
Safety cut-out
Safety cut-out has been activated
Residual heat indicator
1
3
Warning! Risk of burns from residual heat. After being switched off,
the cooking zones need some time to cool down. Look at the residual
heat indicator h .
Residual heat can be used for melting and keeping food warm.
The induction cooking zones create the heat required for cooking directly in the base of the cookware. The glass ceramic is merely heated
by the residual heat of the cookware.
The cooling fan switches itself on and off depending upon the temperature of the electronics.
8
Operating the appliance
3
Use the induction cooking zones with suitable cookware.
Switching the appliance on and off
Control panel
3
Display
Switch on
Touch
for 2 seconds ¾
Switch off
Touch
for 1 second
h / none
Pilot light
lights up
goes out
After switching on, within approx. 10 seconds a heat setting or a function must be set, otherwise the appliance automatically switches itself
off.
Selecting the heat setting
Control panel
Display
Increase
Touch
u to Ç / p
Decrease
Touch
Ç to ¾
Switch off
Touch
and
at the same time
¾
9
Switching the STOP+GO function on and off
The STOP+GO function simultaneously switches all cooking zones that
are switched on to the keep warm setting and then back to the heat
setting that was previously set. This function can be used to briefly interrupt and then continue the cooking process e.g. to take a telephone
call.
3
3
Control panel
Display
To switch
on
Touch STOP+GO
u
To switch
off
Touch STOP+GO
heat setting that was previously set (not automatic
warm up function)
Timer functions are not stopped by STOP+GO.
STOP+GO locks the whole control panel except the sensor field
.
Using the automatic warm-up function
Step
Control panel
Display
1.
Setting the level Ç / p
Ç/p
2.
Place to one side for a moment
Ç/p
3.
4.
3
3
10
touch
touch in order to set the desired cooking setting
a
Æ until ¿ / u
after 3 seconds a
All cooking zones are equipped with an automatic warm-up function.
The automatic warm-up function sets the cooking zone to the highest
setting for a certain period of time and then automatically switches
back to the cooking setting that was originally set.
If during the automatic warm up a a higher heat setting is selected,
e.g. from Á to Ã, the automatic warm up is adjusted.
If there is still residual heat on the cooking zone (display h), the automatic warm up is not performed.
The length of time that the automatic warm up function operates depends on the heat setting selected.
Heat
setting
Length of the
automatic warm
up [min.]
Interme- Length of the
diate
automatic warm
heat set- up [min.]
ting
v
0
1
1
2
1.7
2.
3
3
4.8
3.
5.5
4
6.5
4.
8.2
5
10.2
5.
12.3
6
2
6.
2.5
7
3.5
8
4.5
9
---
Locking/unlocking the control panel
The control panel, with the exception of the “On/Off” sensor field, can
be locked at any time in order to prevent the settings being changed
e.g. by wiping over the panel with a cloth.
3
Control panel
Display
Switch on
Touch
l (for 5 seconds)
Switch off
Touch
previously set heat setting
When you switch the appliance off, the locking function is automatically switched off.
11
Using the child safety device
The child safety device prevents unintentional use of the appliance.
Setting the child safety device
Step
Control panel
1.
Switch on the appliance
(Do not set a heat setting)
2.
Touch
3.
Touch
Display/Signal
¾
until the signal sounds Acoustic signal
l
Appliance switches off.
Releasing the child safety device
Step
1.
Control panel
Switch on the appliance
2.
Touch
3.
Touch
Display/Signal
l
until the signal sounds Acoustic signal
Appliance switches off.
Overriding the child safety device
The child safety device can be released in this way for a single cooking
session; it remains activated afterwards.
Step
1.
2.
Control panel
Switch on the appliance
Touch
and
Display/Signal
l
at the same time ¾ / acoustic signal
Until the appliance is next switched off, it can used as normal.
12
Switching the power function on and off
The power function
makes more power available to the cooking
zones, e.g. to bring a large quantity of water to the boil quickly.
The power function is activated for 10 minutes. After that the cooking
zone automatically switches back to heat setting 9.
Control panel
Display
Switch on
Touch
p
Switch off
Touch
Ç
Touch
Ç
Power Management
The cooking zones have a maximum
power available to them.
If this power range is exceeded by
switching on the power function,
Power Management reduces the
heat setting of another cooking
zone.
The display for this cooking zone alternates for two minutes between
the set heat setting and the maximum possible heat setting. Thereafter the actual heat setting is
displayed.
Example:
3
Last
cooking zone
switched on
Other cooking zone
set
heat setting
set
heat setting
display
actual
heat setting
p
9
6 alternating with 9
6
If the power function has ended, the cooking zones automatically
switch back to the heat setting set previously.
13
Using the timer
All cooking zones can use each use one of the two timer functions at
the same time.
3
3
Function
Condition
Outcome after the
time has elapsed
Safety cut-out
a heat setting is set
acoustic signal
00 flashes
Cooking zone
switches off
Countdown timer
cooking zones not in use
acoustic signal
00 flashes
If a cooking zone is switched off, the timer function set is also switched
off.
If a heat setting is set on this cooking zone in addition to a countdown
timer, the cooking zone is switched off after the time set has elapsed.
Selecting a cooking zone
Step
3
14
Control panel
Display
1.
Touch TIMER once
Pilot light of the first
cooking zone flashes
2. º
Touch TIMER once
Pilot light of the second
cooking zone flashes
3.
Touch TIMER once
Pilot light of the third
cooking zone flashes
4.
Touch TIMER once
Pilot light of the fourth
cooking zone flashes
If the pilot light is flashing more slowly, the heat setting can be set or
modified.
3
If other timer functions are set, after a few seconds the shortest remaining time of all the timer functions is displayed and the corresponding pilot light flashes.
Setting the time
Step
Control panel field
Display
1.
TIMER Select cooking zone
Pilot light of the cooking zone selected flashes
2.
Touch
or for
00 to 99 minutes
the cooking zone selected
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
Switching off the timer function
Step
Control panel field
Display
1.
TIMER Select cooking zone
Pilot light of the cooking zone selected flashes faster
The time remaining is displayed
2.
Touch
for the
The time remaining counts down to
cooking zone select- 00.
ed
The pilot light goes out.
The timer function for the selected cooking zone is switched off.
15
Changing the time
Step
Control panel field
Display
1.
TIMER Select cooking zone
Pilot light of the cooking zone selected flashes faster
The time remaining is displayed
2.
Touch
or
for
01 to 99 minutes
the cooking zone selected
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
Displaying the time remaining for a cooking zone
Step
Control panel field
Display
1.
TIMER Select cooking Pilot light of the cooking zone selectzone
ed flashes faster
The time remaining is displayed
After a few seconds the pilot light flashes more slowly.
Switching off the acoustic signal
Step
Control panel field
Acoustic signal
1.
Touch TIMER
Acoustic signal to acknowledge.
Acoustic signal stops.
16
Safety cut-out
Cooking surface
• If after switching on the cooking surface, a heat setting is not set for
a cooking zone within approx. 10 seconds, the cooking surface automatically switches itself off.
• If one or more sensor fields are covered for longer than approx. 10
seconds, e.g. by a pan placed upon it, a signal sounds and the cooking
surface switches off automatically.
• If all cooking zones are switched off, the cooking surface automatically switches itself off after approx. 10 seconds.
3
Control panel
Moisture (e.g. a wet cloth) or liquid boiling over onto the control panel
immediately switches all cooking zones off.
Cooking zones
• In the event of overheating (e.g. when a pan boils dry) the cooking
zone automatically switches itself off. _ is displayed. Before being
used again, the cooking zone must be set to 0 and allowed to cool
down.
• If cookware that is not suitable is used, f flashes in the display and
after 10 minutes the display for the cooking zone switches itself off.
• If one of the cooking zones is not switched off after a certain time, or
if the heat setting is not modified, the relevant cooking zone switches
off automatically.
Heat setting
Switches off after
V, 1 - 2
6 hours
3 - 4
5 hours
5
4 hours
6 - 9
1.5 hours
17
Tips on cooking and frying
3
Information about acrylamides
According to the latest scientific research, intensive browning of food,
especially in products containing stark, may present a health risk due to
acrylamide. Therefore we recommend cooking at low temperatures and
not browning foods too much.
Cookware for induction cooking zones
Cookware made of
Steel, enamelled steel
yes
Cast iron
yes
Stainless steel
3
3
3
18
suitable
if appropriately labelled by the manufacturer
Aluminium, copper, brass
---
Glass, ceramic, porcelain
---
Cookware for induction cooking zones is labelled as suitable by the
manufacturer.
Test of suitability
Cookware is suitable for induction, if …
• ... a little water is heated on an induction cooking zone set to heat
setting 9 within a few seconds.
• ... a magnet sticks to the bottom of the cookware.
Certain cookware can make noises when being used on induction cooking zones. These noises are not a fault in the appliance and do not affect operation in any way.
Pan size
Induction cooking zones adapt automatically to the size of the cookware bottom up to a certain limit. However the magnetic part of the
cookware bottom must have a minimum diameter depending upon the
size of the cooking zone.
The cookware must be placed centrally on the cooking zone.
Tips on energy saving
2
2
Place cookware on the cooking zone before it is switched on.
If possible, always place a lid on the cookware.
19
Examples of cooking applications
The information given in the following table is for guidance only.
Heat
setting
Cooking
process
0
u
suitable for
Cook time
Tips/Hints
setting, Off position
Keeping
food
warm
Keeping cooked foods
warm
as required
Cover
Melting
Hollandaise sauce,
melting butter, chocolate,
gelatine
5-25 mins.
Stir occasionally
Solidifying
Fluffy omelettes, baked
eggs
10-40 mins.
Cook with lid on
1-2
Simmering rice and milkAdd at least twice as
based dishes
much liquid as rice, stir
25-50 mins.
Heating up ready-cooked
milk dishes part way
meals
through cooking
2-3
Simmering
3-4
Steaming Steaming vegetables, fish
20-45 mins.
Braising
Braising meat
With vegetables add
only a little liquid (a
few tablespoons)
Steaming potatoes
20-60 mins.
Use only a little liquid,
e. g.: max. ¼ l water
for 750 g of potatoes
Cooking larger quantities
of food, stews and soups
60-150
mins.
Up to 3 l liquid plus ingredients
6-7
Gentle
frying
Frying escalope, veal cordon bleu, cutlets, rissoles,
sausages, liver, roux, eggs,
pancakes, doughnuts
Steady
frying
Turn halfway through
cooking
7-8
Heavy
frying
Hash browns, loin steaks,
steaks, Flädle (pancakes
for garnishing soup)
5-15 mins.
per pan
Turn halfway through
cooking
9
Boiling
Searing
Deep frying
4-5
Boiling
Boiling large quantities of water, cooking pasta, searing meat
(goulash, pot roast), deep frying chips
The power function is suitable for heating large quantities of liquid.
20
Cleaning and care
1
1
1
Take care! Risk of burns from residual heat.
Let the appliance cool down.
Important Sharp objects and abrasive cleaning materials will damage
the appliance. Clean with water and washing up liquid.
Important Residues from cleaning agents will damage the appliance.
Remove residues with water and washing up liquid.
Cleaning the appliance after each use
1. Wipe the appliance with a damp cloth and a little washing up liquid.
2. Rub the appliance dry using a clean cloth.
Removing deposits
1. Place the scraper on the glass ceramic surface at an angle.
2. Remove residues by sliding the blade over the surface.
3. Wipe the appliance with a damp cloth and a little washing up liquid.
4. Rub the appliance dry using a clean cloth.
Remove
Type of dirt
imme- when the appliance has
diately
cooled down
sugar, food containing sugar
yes
---
plastics, tin foil
yes
---
limescale and water rings
---
yes
fat splashes
---
yes
shiny metallic discolorations
---
yes
using
a scraper*
cleaner for glass ceramic or stainless
steel*
*Scrapers and cleaners for glass ceramic and stainless steel can be purchased in specialist shops
3
3
Remove stubborn residues with a cleaner for glass ceramic or stainless
steel.
Scratches or dark stains on the glass ceramic that cannot be removed
do not however affect the functioning of the appliance.
21
What to do if …
Problem
The cooking zones will not
switch on or are not functioning
Possible cause
Remedy
More than 10 seconds have Switch the appliance on
passed since the appliance again.
was switched on
The lock is switched on l
Switch off the lock (See
the section “Locking/unlocking the control panel”)
The child safety device is
switched on l
Deactivate the child safety
device (See the section
“Child safety device”)
Several sensor fields were
touched at the same time
Only touch one sensor field
The sensor fields are partly Remove the cloth or the
covered by a damp cloth or liquid.
with liquid
Switch the appliance on
again.
Safety cut-out has been
triggered
Switch the appliance on
again
STOP+GO is activated
Switching off STOP+GO
The residual heat indicator The cooking zone was only If the cooking zone is supis not displaying anything on for a short time and is posed to be hot, call your
therefore not hot
local Service Force Centre.
The automatic warm up
function is not switching
itself on
22
There is still residual heat
on the cooking zone h
Let the cooking zone cool
down
The highest heat setting is
set Ç
The highest heat setting
has the same power as the
automatic warm up function
The heat setting was set
using the sensor field
1. Switching off the cooking zone
2. Set the cooking zone using the sensor field
Repeated acoustic signal
One or more sensor fields
(6x), appliance switches off have been covered for
longer than 10 seconds
Uncover sensor field
Display is switching between two heat settings
See the section “Switching
the power function on and
off”
Power management is reducing the power of this
cooking zone
f flashes
Unsuitable cookware
Use suitable cookware
No cookware on the cooking zone
Place cookware on the
cooking zone
The diameter of the botMove onto a smaller cooktom of the cookware is too ing zone
small for the cooking zone
Use suitable cookware
_ is lit
e and number are displayed
1
3
Overheating protection for Switch off the cooking
the cooking zone has been zone. Switch the cooking
triggered
zone on again
Electronics fault
Disconnect the appliance
from the electrical supply
for a few minutes (Take the
fuse out of the house’s
wiring system)
If after switching on again,
e is displayed again, call
your local Service Force
Centre.
If you are unable to remedy the problem by following the above
suggestions, please contact your local Service Force Centre.
Warning! Repairs to the appliance are only to be carried out by qualified service engineers. Considerable danger to the user may result from
improper repairs.
If the appliance has been wrongly operated, the visit from the
ervice technician or dealer may not take place free of charge, even
during the warranty period.
Disposal
2
2
Packaging material
The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<,
>PS<, etc. Please dispose of the packaging materials in the appropriate
container at your local waste disposal facilities.
Old appliance
Please dispose of your old appliance in line with the guidelines for disposal in your area.
23
Installation Instructions
Safety instructions
1
1
24
The laws, ordinances, directives and standards in force in the country of
use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.)
Installation may only be carried out by a qualified electrician.
The minimum distances to other appliances are to be observed.
Drawers may only be installed with a protective board directly under the appliance.
The cut surfaces of the work top are to be protected against moisture
using a suitable sealant.
The sealant seals the appliance to the work top with no gap.
When building in, protect the underside of the appliance from steam
and moisture, e.g. from a dishwasher or oven.
Avoid installing the appliance next to doors and under windows. Otherwise hot cookware may be knocked off the rings when doors and windows are opened.
WARNING!
Risk of injury from electrical current.
• The electrical mains terminal is live.
• Observe connection schematic.
• Observe electrical safety rules.
• Ensure anti-shock protection through correct installation by a qualified electrician.
• The appliance must be connected to the electrical supply by a qualified electrician.
IMPORTANT!
Risk of injury from electrical current.
Loose and inappropriate plug and socket connections can make the terminal overheat.
• Have the clamping joints correctedly installed by a qualified electrician.
• Use strain relief clamp on cable.
• In the event of single-phase or two-phase connection, the appropriate mains cable of type H05BB-F Tmax 90° (or higher) must be used.
• If this appliance’s mains cable is damaged, it must be replaced by a
special cable (type H05BB-F Tmax 90°; or higher). The latter is available from the Customer Care Department.
A device must be provided in the electrical installation which allows the
appliance to be disconnected from the mains at all poles with a contact
opening width of at least 3 mm
Suitable isolation devices include line protecting cut-outs, fuses (screw
type fuses are to be removed from the holder), earth leakage trips and
contactors.
Installation proud of the work surface
• Clean the worktop in the area of the cut-out section.
• Stick the one-sided self-adhesive sealing tape supplied all the way
round the lower edge of the cooking surface along the outer edge of
the glass ceramic panel. Do not stretch it. The cut ends should lie in
the middle of one side. When you have cut it to length (add a few
mm), press the two ends flush up against one another.
25
Assembly
26
27
28
Rating Plate
29
Warranty conditions
Great Britain
Standard guarantee conditions
We, AEG, undertake that if within 12 months of the date of the purchase this AEG appliance or
any part thereof is proved to be defective by reason only of faulty workmanship or materials, we
will, at our discretion repair or replace the same FREE OF CHARGE for labour, materials or carriage
on condition that:
• The appliance has been correctly installed and used only on the electricity or gas supply stated
on the rating plate.
• The appliance has been used for normal domestic purposes only, and in accordance with the
manufacturer's operating and maintenance instructions.
• The appliance has not been serviced, maintained, repaired, taken apart or tampered with by any
person not authorised by us.
• All service work under this guarantee must be undertaken by a Service Force Centre. Any appliance or defective part replaced shall become the Company's property.
• This guarantee is in addition to your statutory and other legal rights.
• Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available
outside these hours in which case a premium will be charged.
Exclusions
This guarantee does not cover:
• Damage or calls resulting from transportation, improper use or neglect, the replacement of any
light bulbs or removable parts of glass or plastic.
• Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the United Kingdom.
• Appliances found to be in use within a commercial environment, plus those which are subject
to rental agreements.
• Products of AEG manufacture which are not marketed by AEG.
European Guarantee
If you should move to another country within Europe then your guarantee moves with you to
your new home subject to the following qualifications:
• The guarantee starts from the date you first purchased your product.
• The guarantee is for the same period and to the same extent for labour and parts as exists in
the new country of use for this brand or range of products.
• This guarantee relates to you and cannot be transferred to another user.
• Your new home is within the European Community (EC) or European Free Trade Area.
• The product is installed and used in accordance with our instructions and is only used domestically, i.e. a normal household.
• The product is installed taking into account regulations in your new country.
Before you move please contact your nearest Customer Care centre, listed below, to give them details of your new home. They will then ensure that the local Service Organisation is aware of your
move and able to look after you and your appliances.
France
Germany
Italy
Sweden
UK
30
Senlis
Nürnberg
Pordenone
Stockholm
Slough
+33 (0) 3 44 62 29 29
+49 (0) 800 234 7378
+39 (0) 800 117511
+46 (0) 8 672 5360
+44 (0) 1753 219899
Service and Spare Parts
If the event of your appliance requiring service, or if you wish to purchase spare parts, please contact Service Force by telephoning:
0870 5 929 929
Your telephone call will be automatically routed to the Service Force
Centre covering your post code area.
For the address of your local Service Force Centre and further information about Service Force, please visit the website at
www. serviceforce.co.uk
Before calling out an engineer, please ensure you have read the details
under the heading „What to do if...“
When you contact the Service Force Centre you will need to give the
following details:
1. Your name, address and post code.
2. Your telephone number.
3. Clear and concise details of the fault.
4. The model and serial number of the appliance (found on the rating
plate)
5. The purchase date.
Please note that a valid purchase receipt or guarantee documentation is
required for in-guarantee service
calls.
Customer Care
For general enquiries concerning
your AEG appliance, or for further
information on AEG products please
contact our Customer Care Department by letter or telephone at the
address below or visit our website at www.aeg.co.uk.
Customer Care Department
AEG Domestic Appliances
55-77 High Street
Slough
Berkshire, SL1 1DZ
Tel: 08705 350350 (*)
(*) Calls may be recorded for training purposes
31
From the Electrolux Group. The world´s No.1 choice.
The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor
use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines,
vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more
than 150 countries around the world.
AEG Hausgeräte GmbH
Postfach 1036
D-90327 Nürnberg
http://www.aeg.hausgeraete.de
© Copyright by AEG
822 924 796-A-110504-01
Subject to change without notice
Download PDF

advertising