View Sonic | VP930-2 VS10725 | Service manual | View Sonic VP930-2 VS10725 Service manual

Service Manual
ViewSonic VP930-2
VP930b-2
Model No. VS10725
19” Color TFT LCD Display
(VP930-2_VP930b-2_SM Rev. 1a Mar. 2006)
ViewSonic“ 381 Brea Canyon Road, Walnut, California 91789 USA - (800) 888-8583
Copyright
Copyright ¤ 2006 by ViewSonic Corporation. All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or
computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission of ViewSonic Corporation.
Disclaimer
ViewSonic makes no representations or warranties, either expressed or implied, with respect to the
contents hereof and specifically disclaims any warranty of merchantability or fitness for any particular
purpose. Further, ViewSonic reserves the right to revise this publication and to make changes from time
to time in the contents hereof without obligation of ViewSonic to notify any person of such revision or
changes.
Trademarks
Optiquest is a registered trademark of ViewSonic Corporation.
ViewSonic is a registered trademark of ViewSonic Corporation.
All other trademarks used within this document are the property of their respective owners.
Revision History
Revision
SM Editing Date
1a
03/20/06
Description of Changes
ECR Number
Jamie Chang
Initail Release
Confidential - Do Not Copy
ViewSonic Corporation
i
Editor
VP930-2_VP930b-2
TABLE OF CONTENTS
1. Precautions and Safety Notices
1
2. Specification
5
3.
Front Panel Function Control Description
10
4.
Circuit Description
17
5.
Adjustment Procedure
18
6.
Troubleshooting Flow Chart
30
7.
Recommended Spare Parts List
35
8.
Exploded Diagram and Exploded Parts List
43
9.
Block Diagram
50
10.
Schematic Diagrams
51
11.
PCB Layout Diagrams
57
Confidential - Do Not Copy
ViewSonic Corporation
ii
VP930-2_VP930b-2
1. Precautions and Safety Notices
1. Appropriate Operation
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
Turn off the product before cleaning.
Use only a dry soft cloth when cleaning the LCD panel surface.
Use a soft cloth soaked with mild detergent to clean the display housing.
Use only a high quality, safety approved AC/DC power cord.
Disconnect the power plug from the AC outlet if the product will not be used for a long period of time.
If smoke, abnormal noise, or strange odor is present, immediately switch the LCD display off.
Do not touch the LCD panel surface with sharp or hard objects.
Do not place heavy objects on the LCD display, video cable, or power cord.
Do not use abrasive cleaners, waxes or solvents for your cleaning.
Do not operate the product under the following conditions:
- Extremely hot, cold or humid environment.
- Areas containing excessive dust and dirt.
- Near any appliance generating a strong magnetic field.
- In direct sunlight.
2. Caution
No modification of any circuit should be attempted. Service work should only be performed after you are thoroughly familiar
with all of the following safety checks and servicing guidelines.
3. Safety Check
Care should be taken while servicing this LCD display. Because of the high voltage used in the inverter circuit, the voltage is
exposed in such areas as the associated transformer circuits.
4. LCD Module Handling Precautions
4.1 Handling Precautions
(1) Since front polarizer is easily damaged, pay attention not to scratch it.
(2) Be sure to turn off power supply when connecting or disconnecting input connector.
(3) Wipe off water drops immediately. Long contact with water may cause discoloration or spots.
(4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
(5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
(6) Since CMOS LSI is used in this module, take care of static electricity and ensure human earth when handling.
(7) Do not open or modify the Module Assembly.
(8) Do not press the reflector sheet at the back of the module in any direction.
(9) In the event that a Module must be put back into the packing container slot after it was taken out of the
container, do not press the center of the CCFL Reflector edge. Instead, press at the far ends of the
CFL Reflector edge softly. Otherwise the TFT Module may be damaged.
(10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate or tilt the Interface
Connector of the TFT Module.
Confidential - Do Not Copy
ViewSonic Corporation
1
VP930-2_VP930b-2
(11) After installation of the TFT Module into an enclosure (LCD monitor housing, for example), do not twist or
bend the TFT Module even momentarily. When designing the enclosure, it should be taken into consideration
that no bending/twisting forces may be applied to the TFT Module from outside. Otherwise the TFT Module
may be damaged.
(12) The cold cathode fluorescent lamp in the LCD contains a small amount of mercury. Please follow local
ordinances or regulations for disposal.
(13) The LCD module contains a small amount of materials having no flammability grade. The LCD module
should be supplied with power that complies with the requirements of Limited Power Source
(IEC60950 or UL1950), or an exemption should be applied for.
(14) The LCD module is designed so that the CCFL in it is supplied by a Limited Current Circuit (IEC60950
or UL1950). Do not connect the CCFL to a Hazardous Voltage Circuit.
Confidential - Do Not Copy
ViewSonic Corporation
2
VP930-2_VP930b-2
Incorrect Methods:
Correct Methods:
Only touch the metal frame of the LCD
panel or the front cover of the monitor.Do
not touch the surface of the polarizer.
Take out the monitor with cushions
Surface of the LCD panel is pressed by
fingers and that will probably cause
“Mura”.
Taking out the monitor by grasping the
LCD panel.That will probably cause
“Mura”.
Confidential - Do Not Copy
ViewSonic Corporation
3
VP930-2_VP930b-2
Place the monitor on a clean and soft
foam pad.
Placing the monitor on foreign objects.
That will probably scratch the surface
of the panel or cause “Mura.”
The panel is placed facedown on
the lap. That will probably cause
“Mura.”
Confidential - Do Not Copy
ViewSonic Corporation
4
VP930-2_VP930b-2
2.SPECIFICATIONS
GENERAL specification
Test Resolution & Frequency
Test Image Size
Contrast and Brightness Controls
1280x1024 @ 60Hz
Full Size
Factory Default:
Contrast = 70%, Brightness = 100%
VIDEO INTERFACE
Input Connector (refer the appendix A)
D-Sub1 = DB-15 (Analog)
D-Sub2 = DB-15 (Analog)
DVI-D = DVI-I (Digital)
Default Input Connector
Resolution Compatibility
Defaults to the first detected input
Equal to twice the weight of the monitor for
five minutes
Compliant DDC/CI
Video RGB (Analog)
Separate Sync / Composite Sync / SOG
TMDS (Digital)
75 Ohms (Analog), 100 Ohms (Digital)
950 mV with no damage to monitor
1250 mV with no damage to monitor
TTL
Compliant with Revision 1.0
Separate Sync / Composite Sync / SOG
Shall be compatible with all PC type
computers, Macintosh computers, and after
market video cards
640 x 350, 640 x 400, 640 x 480, 640 x 870,
720 x 400, 720 x 480, 720 x 576, 800 x 600,
832 x 624, 1024 x 768, 1152 x 864, 1152 x
870, 1280 x 720, 1280 x 768, 1280 x 960,
1280 x 1024
Exclusions
Not compatible with interlaced video
Horizontal / Vertical Frequency
Horizontal Frequency
Vertical Refresh Rate
Maximum Pixel Clock
Sync Polarity
24 – 82 KHZ
50 – 85 HZ
135 MHz
Independent of sync polarity
Video Cable Strain Relief
Video Cable Connector DB-15 Pin out
Video Signals
Video Impedance
Maximum PC Video Signal
Maximum Mac Video Signal
Sync Signals
DDC/CI
Sync Compatibility
Video Compatibility
Confidential - Do Not Copy
ViewSonic Corporation
5
VP930-2_VP930b-2
Table : 15 pin D-sub connector pin assignment
Pin Number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Pin Function
Red video input
Green video input
Blue video input
No Connection
Ground
Red video ground
Green video ground
Blue video ground
+5V
Ground
No connection
(SDA)
Horizontal sync (Composite sync)
Vertical sync
(SCL)
Timing Table
Item
11
640 x 350
640 x 400
640 x 400
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
640 x 870
720 x 400
@
@
@
@
@
@
@
@
@
@
@
Timing
70 Hz,
60 Hz,
70 Hz,
50 Hz,
60 Hz,
67 Hz,
72 Hz,
75 Hz,
85 Hz,
75 Hz,
70 Hz,
12
13
14
15
720 x 480
720 x 576
800 x 600
800 x 600
@
@
@
@
60 Hz,
50 Hz,
56 Hz,
60 Hz,
1
2
3
4
5
6
7
8
9
10
31.5
31.5
31.5
24.7
31.5
35.0
37.9
37.5
43.3
68.9
31.5
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
31.5
31.3
35.1
37.9
KHz
KHz
KHz
KHz
Analog
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Separate
Only
Yes
Yes
Yes
Yes
Digital
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Remark
DMT;
DMT
DMT
DMT
DMT;
For MAC
DMT
DMT
DMT
MAC
DMT
DMT
DMT”
DMT
DMT
Confidential - Do Not Copy
ViewSonic Corporation
6
VP930-2_VP930b-2
32
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1152 x 870
1280 x 720
1280 x 720
1280 x 768
1280 x 768
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
@
72 Hz,
75 Hz,
85 Hz,
75 Hz,
50 Hz,
60 Hz,
70 Hz,
72 Hz,
75 Hz,
75 Hz,
85 Hz,
75 Hz,
75 Hz,
50 Hz,
60 Hz,
50 Hz,
60 Hz,
48.1
46.9
53.7
49.7
39.6
48.4
56.5
58.1
60.0
60.2
68.7
67.5
68.7
37.5
45.0
39.6
47.8
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
33
1280 x 768 @
75 Hz,
60.3
KHz
34
1280 x 768 @
85 Hz,
68.6
KHz
35
36
37
38
39
40
1280 x 960
1280 x 960
1280 x 960
1280 x 1024
1280 x 1024
1280 x 1024
50 Hz,
60 Hz,
75 Hz,
50 Hz,
60 Hz,
75 Hz,
49.4
59.7
75.2
52.7
64.0
80.0
KHz
KHz
KHz
KHz
KHz
KHz
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
@
@
@
@
@
@
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Separate
Only
Separate
Only
Separate
Only
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
DMT
DMT
DMT
MAC
DMT;
DMT
DMT
DMT
DMT
For MAC
DMT
DMT
For MAC
720p
720p
DMT
DMT;
Yes
DMT;
Yes
DMT;”
Yes
Yes
Yes
Yes
Yes
Yes
DMT
DMT
DMT
DMT
DMT
DMT
*1. Tolerance ≧ ±2KHz.
*2. Any timing not in the list, it should display as normal or show on “OUT OF RANGE” OSD message
without blanking.
*3. The image quality of 85Hz mode might be worse than 75Hz.
Primary Presets
1280x1024 @ 60Hz
User Presets
Number of User Presets (recognized timings) Available: 10 presets total in FIFO
configuration
Confidential - Do Not Copy
ViewSonic Corporation
7
VP930-2_VP930b-2
Panel Characteristics
st
1 Source Panel
Model number
Type
Active Size
Pixel Arrangement
Pixel Pitch
Glass Treatment
# of Backlights
Backlight Life
Luminance (Center) –
CT = 6500K,
Contrast/ Brightness = Max
Brightness Uniformity
Contrast Ratio
Color Depth
Horizontal Viewing Angle
Vertical Viewing Angle
Response Time
10%-90% @ Ta=25°C
Mercury
Panel Defects
AUO M190EN03 V.2
Active Matrix TFT, TN technology
19”
RGB Vertical Stripe
0.294 mm
Anti-Glare
4 CCFL
50000 Hrs (Typ)
30000 Hrs (Min)
250 cd/m2 (Typ after 30 minute warm up)
200 cd/m2 (Min after 30 minute warm up)
80 % (Typ) / 75 % (Min)
1000 :1 (Typ)
750 : 1 (Min)
16.7 million colors (8 bit panel)
170 degrees (Typ) / 150 degrees (Min) @ CR>10
130 degrees (Typ) / 110 degrees (Min) @ CR>10
GTG
8ms (Avg) / 16ms (Max)
3.0 mg per lamp
Please see Panel Quality Specifications.
Confidential - Do Not Copy
ViewSonic Corporation
8
VP930-2_VP930b-2
IMAGE PERFORMANCE
Factory Defaults
Item
Defaults
Item
Contrast
Brightness
Color Temperature
Sharpness
OSD H. Position
OSD V. Position
OSD Time Out
OSD Background
70%
100%
6500K
100%
50%
50%
15 Sec
Enabled
Input Priority
Resolution Notice
Volume
Balance
Treble
Bass
Defaults
Auto Search
Enabled
N/A
N/A
N/A
N/A
Dimension (Desktop)
Width
Height (Height adjust to the bottom)
Depth
Monitor Weight
*Refer to Figure 1
412mm (16.2"
356mm (14") / 491mm (19.3")
289mm (11.4"
6.8 Kg (15 lbs)
Dimension (Head Only / Wall Mount)
Width
Height
Depth
Monitor Weight
*Refer to Figure 1
412mm (16.2"
336mm (13.2"
61mm (2.4
4.2 Kg (9.3 lbs)
Ergonomics
Tilt Up
Tilt Down
Swivel Right
Swivel Left
Height Adjust
Pivot
≧ 20º
From 0º down to -3º ~ -5º
≧ 135º
≧ 135º
0 ~ ≧ 135 mm
0~90 degrees (Clockwise)
Confidential - Do Not Copy
ViewSonic Corporation
9
VP930-2_VP930b-2
3. Front Panel Function Control Description
3.1 Location of Controls
Confidential - Do Not Copy
ViewSonic Corporation
10
VP930-2_VP930b-2
Confidential - Do Not Copy
ViewSonic Corporation
11
VP930-2_VP930b-2
Confidential - Do Not Copy
ViewSonic Corporation
12
VP930-2_VP930b-2
Confidential - Do Not Copy
ViewSonic Corporation
13
VP930-2_VP930b-2
Confidential - Do Not Copy
ViewSonic Corporation
14
VP930-2_VP930b-2
Confidential - Do Not Copy
ViewSonic Corporation
15
VP930-2_VP930b-2
Hot Key for Function Controls
Buttons:
[1]
[2]
[Up] or [Dn]
[Up] + [Dn]
[1] + [2]
Functions:
Main menu
Input Select
To immediately activate Contrast menu. It should
be change to Brightness OSD by push button [2]
Recall both of Contrast and Brightness to default
Toggle 720x400 and 640x400 mode when input
720x400 or 640x400 mode.
Auto White Balance.(Not shown on user’s guide)
Power Lock
OSD Lock
Didable Theft Defence function
All reset
[1] + [Up] + [Dn]
[1] + [Dn]
[1] + [Up]
[1] + [Dn] + [2]
[Up] + [PW] + Main
Power On
No signal + [PW] +[2] + Burning mode
Main Power on
Signal + [PW] +[2] + Main Factory Mode
Power on
Remark : All the short cuts function are only available while OSD off
Confidential - Do Not Copy
ViewSonic Corporation
16
VP930-2_VP930b-2
4. Circuit Description
1.
WORKING THEOREM
A. Scaler
The TSU66AJ is total solution graphics processing IC for LCD monitors with panel
resolutions up to SXGA. It is configured with a high-speed integrated triple-ADC/PLL, an
integrated DVI receiver, a high quality display processing engine, and an integrated output
display interface that can support LVDS panel interface format. To further reduce system
costs, the TSU66AJ also integrates intelligent power management control capability for
green-mode requirements and spread-spectrum support for EMI management. The
TSU66AJ incorporates the world’s first coherent oversampled RGB graphics ADC in a
monitor controller system1. The oversampling ADC samples the input RGB signals at a
frequency that is much higher than the signal source pixel rate. This can preserve details in
the video signal that ordinarily would be lost due to input signal jitter or bandwidth limitations
in non-oversampled systems. The TSU66AJ also incorporates a new Dynamic Frame Rate
(DFR) generator2 for the digital output video to the display panel that preserves the
advantages of a fixed output clock rate, while eliminating the output end of frame short-line.
?
B. MCU:
The MTV416M micro-controller is an 8051 CPU core embedded device targeted for LCD
Monitor or LCD TV application. It includes an 8051 CPU core, a 128K-byte internal
program Flash-ROM, a 768-byte SRAM, 4 channels of PWM DAC, 4 channels of 6-bit
ADC, and a built-in sync-processor. It also includes two IIC Slave B ports, supporting
VESA DDC/CI for both D-sub and DVI interfaces, and a Boot-Code-Free ISP (In System
Programming).
Confidential - Do Not Copy
ViewSonic Corporation
17
VP930-2_VP930b-2
5. Adjusting Procedure
Confidential - Do Not Copy
ViewSonic Corporation
18
VP930-2_VP930b-2
5-1.1 Product
17” LCD Monitor
5-1.2 Test Equipment
Color Video Signal & Pattern (or PC with SXGA resolution)
5-1.3 Test Condition
Before function test and alignment, each LCD Monitor should be run-in and warmed up for at
least
30 minutes with the following conditions:
(a) In room temperature,
(b) With full-white screen, RGB, and Black
(c) With cycled display modes,
640*480 (H=43.27 kHz, V=85Hz)
800*600 (H=53.7 kHz, V=85Hz)
1024*768 (H=68.67 kHz, V=85Hz)
1280*1024(H=80.0KHz, V=75Hz)
Confidential - Do Not Copy
ViewSonic Corporation
19
VP930-2_VP930b-2
5-1.4 Test Display Modes & Pattern
5-1.4.1 Compatible Modes
Analog Digital
Item
1
640 x 350
2
640 x 400
3
640 x 400
4
640 x 480
5
640 x 480
6
640 x 480
7
640 x 480
8
640 x 480
9
640 x 480
10
640 x 870
11
720 x 400
12
720 x 400
13
720 x 480
14
720 x 576
15
800 x 600
16
800 x 600
17
800 x 600
18
800 x 600
19
800 x 600
20
800 x 600
21
832 x 624
22
1024 x 768
23
1024 x 768
24
1024 x 768
25
1024 x 768
26
1024 x 768
27
1024 x 768
28
1024 x 768
29
1152 x 864
30
1152 x 870
31
1280 x 720
32
1280 x 720
33
1280 x 768
34
1280 x 768
35
1280 x 768
36
1280 x 768
37
1280 x 768
38
1280 x 960
39
1280 x 960
Timing
@
70 Hz,
@
60 Hz,
@
70 Hz,
@
50 Hz,
@
60 Hz,
@
67 Hz,
@
72 Hz,
@
75 Hz,
@
85 Hz,
@
75 Hz,
@
70 Hz,
@
85 Hz,
@
60 Hz,
@
50 Hz,
@
50 Hz,
@
56 Hz,
@
60 Hz,
@
72 Hz,
@
75 Hz,
@
85 Hz,
@
75 Hz,
@
50 Hz,
@
60 Hz,
@
70 Hz,
@
72 Hz,
@
75 Hz,
@
75 Hz,
@
85 Hz,
@
75 Hz,
@
75 Hz,
@
50 Hz,
@
60 Hz,
@
50 Hz,
@
60 Hz,
@
60 Hz,
@
75 Hz,
@
85 Hz,
@
50 Hz,
@
60 Hz,
31.5
31.5
31.5
24.7
31.5
35.0
37.9
37.5
43.3
68.9
31.5
37.9
31.5
31.3
24.7
35.1
37.9
48.1
46.9
53.7
49.7
39.6
48.4
56.5
58.1
60.0
60.2
68.7
67.5
68.7
37.5
45.0
39.6
47.4
47.8
60.3
68.6
49.4
59.7
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
KHz
Confidential - Do Not Copy
ViewSonic Corporation
20
VP930-2_VP930b-2
40
41
42
43
1280 x 960
1280 x 1024
1280 x 1024
1280 x 1024
@
@
@
@
75 Hz,
50 Hz,
60 Hz,
75 Hz,
75.2
52.7
64.0
80.0
KHz
KHz
KHz
KHz
5-1.5.2 Auto Image Adjust
Please select and enter “Auto Image Adjust” function on Main Menu to see if it is workable. The
“Auto Image Adjust” function is aimed to offer a better screen quality by built-in ASIC. For
optimum screen quality, the user has to adjust each function manually.
5-1.5.3 Firmware
Test Pattern: Burn in Mode (Refer to Chapter III-3. Hot Keys for Function Controls)
- Make sure the F/W is the latest version.
5-1.5.4 DDC
Test Pattern: EDID program
- Make sure it can pass test program.
5-1.5.5 Fine Tune and Sharpness
Test Signal: 1280 x 1024 @ 60.0kHz
Test Pattern: Line Moiré Pattern
- Check and see if the image has noise and focus performs well. Eliminate visual line bar.
- If not, readjust by the following steps:
(a) Select and enter “Fine Tune” function on “Manual Image Adjust” to adjust the image to
eliminate visual wavy noise.
(b) Then, select and enter “Sharpness” function to adjust the clarity and focus of the screen image.
5-1.5.6 White Balance
Test Signal: 640*480@60Hz
Test Pattern: Full White and Black Pattern
5-1.5.7 R, G, B, Colors Contrast
Test Signal: 1280 x 1024 @ 60.0kHz
Test Pattern: R, G, B, Color Intensities Pattern and 16 Gray Scale Pattern
- Check and see if each color is normal and distinguishable.
- If not, please return the unit to repair area.
5-1.5.8 Screen Uniformity and Flicker
Test Signal: 1280 x 1024 @ 60.0kHz
Test Pattern: Full White Pattern
- Check and see if it is in normal condition.
Confidential - Do Not Copy
ViewSonic Corporation
21
VP930-2_VP930b-2
5-1.5.9 Dead Pixel and Line
Test Signal: 1280 x 1024 @ 60.0kHz
Test Pattern: Dark and White Screen Pattern
- Check and see if there are dead pixels on LCD panel with shadow gauge and filter film.
- The total numbers and distance of dead pixels should be compliant with the spec.
5-1.5.10 Mura
Test Pattern: White, RGB, Black, & Grey
Test Tool: 10 % ND Filter
- Check if the Mura can pass 10 % ND Filter.
5-1.5.11 Check for Secondary Display Modes
Test Signal:
Analog: 640*350@70Hz; 640*400@60Hz;640*480@50/60/67/72/75/85Hz;
720*400@70Hz/85Hz; 720*480@60Hz; 720*576@50Hz; 800*600@56/60/72/75/85Hz;
832*624@75Hz, 1024*768@50/60/70/72/75/85Hz; 1152*864@75Hz; 1152*870@75Hz;
1280*720@50/60Hz; 1280*768@50/60/75/85Hz; 1280*960@50/60/75Hz; 1280*1024@50/60/75Hz
Digital: 640*350@70Hz; 640*400@60Hz;640*480@50/60/67/72/75/85Hz;
720*400@70Hz/85Hz; 720*480@60Hz; 720*576@50Hz; 800*600@56/60/72/75/85Hz;
832*624@75Hz, 1024*768@50/60/70/72/75/85Hz; 1152*864@75Hz; 1152*870@75Hz;
1280*720@50/60Hz; 1280*768@50/60/75/85Hz; 1280*960@50/60/75Hz; 1280*1024@50/60/75Hz
- Normally when the primary mode 1280*1024@60Hz is well adjusted and compliant with the
specification, the secondary display modes will be great possible to be compliant with the spec. But
we still have to check with the general test pattern to make sure every secondary is compliant with
the specification.
5-1.5.12 All Modes Reset
After final QC step, we have to erase all saved changes again and restore the factory defaults. You
should do “All Mode Reset” again.
5-1.5.13 Power off Monitor
Turn off the monitor by pressing “Power” button.
5-2. Firmware Upgrade Procedure
5-2.1 Equipment Needed
- VP930 Monitor
- Fixture for Firmware Upgrade
- Power Adapter (P/N: 47.58201.001) *1 for Fixture
- VGA Cable (P/N: 42.59901.003) *1(Pin 4, 11 should be connected to GND)
- PC (Personal Computer)
- LPT Cable (P/N: 42.59906.001) *1
- Firmware Upgrade Program
- One additional monitor for checking the program execution PC
Fixture
Printer Port
VP930
Confidential - Do Not Copy
ViewSonic Corporation
22
VP930-2_VP930b-2
5.3 . EDID Procedure
DDC User’s manual
1. Hardware installation
A. The EDID cable has equipped 2 different terminals;
one is male 25 pin printer connector and another side is male 15 pin D-sub connecter.
B. Connect the EDID cable from PC Printer port to monitor D-sub connector.
C. Make sure the monitor was working under power saving mode and keep it at “Power
Saving state” during DDC process.
EDID-Kit
Cable
PC printer
port 25pin
connector
D-Sub of
Monitor
15pin VGA
Confidential - Do Not Copy
ViewSonic Corporation
23
VP930-2_VP930b-2
2. Programming procedure
A. Normally, you received a EDID zip file of new model. You need to unzipped it.
B. There will need the following files for DDC program: (VP730 is an example)
1. DPS.EXE
2. VP930.BAT
3. VP930.DDC
4. VP930.CFG
5. VP930.DPS
C. Execute the VP930.BAT (for VP930 monitor only) from Programming PC. Below screen will
display.
Fig-DDC1
Refer to Fig-DDC1; you have to select the required item if the display data was not you want.
Press 1: For year, the cursor will move to the column behind “Edit Year” than you can key in
the data you want after that press enter to exit and return. (It needs 4 numbers for this
data)
Press 2: For week, the cursor will move to the column behind “Edit Week” than you can key
in the data you want after that press enter to exit and return. (This data is within 1 ~ 53.)
Press 3: For S/N,, the cursor will move to the column behind “Edit S/N” than you can key in
the data you want after that press enter to exit and return. (This data is within 0 ~ 99999,
5 numbers max.)
Confidential - Do Not Copy
ViewSonic Corporation
24
VP930-2_VP930b-2
D. Press “ESC” or “Enter” key to return main menu, the Fig-DDC2 will be displayed and the
correct serial number will show on right corner of screen.
Fig-DDC2
Display updated serial
number.
Under Fig-DDC2, you could change the “Week” data by press “*” key and the “S/N” data by press ““ key.
Press 3 “DDC Writer/Check Data”: The Kit will start to program new data of EDID into monitor, all
DDC data will display on the screen after programming.
Please refer to Fig-DDC3 below, the DDC process is finished.
Fig-DDC3
Confidential - Do Not Copy
ViewSonic Corporation
25
VP930-2_VP930b-2
The message (E2PROM Acknowledge Not Echo) will display on the screen if there is any error
detected by Programming PC. If error message is happened, please re-check the connection of
cable and return to first step.
Please refer to the Viewsonic EDID data format that was printing on ID label.
PPPYYWWxxxxx
PPP = Viewsonic Regional Product ID Code, EX. VE500 is “910”, VE700 is “A10” and
VG900 is “A1C ”.
YY= 2 digits of Manufacturing year. (range 1996-2015).
WW = 2 digits of Manufacturing week (range 01-54).
xxxxx = 5 digits of Sequence number. (range 00001-99999).
Confidential - Do Not Copy
ViewSonic Corporation
26
VP930-2_VP930b-2
5.4 . ISP procedure
Connection of ISP Kit:
Using ISP cable connect PC Print port
Using VGA cable connect monitor (destination).
Confidential - Do Not Copy
ViewSonic Corporation
27
VP930-2_VP930b-2
Setting of ISP program on PC
1.
2.
3.
4.
Setup MYSON ISP program,
Execute ISP program to get the window below
Select “MTV416M128” MCU type,
Select CPU=5 MHz
MTV Type
CPU=5
Type
5. Click “Load MCU file” and then find the updated firmware code.
6. Click “Create Security File” going to next window
MCU File
Type
Create Security File
7. Select Command No=4
Confidential - Do Not Copy
ViewSonic Corporation
28
VP930-2_VP930b-2
8. Put ISP Slave Add=94 ; Slave B Add=94 ; Command 1=ac ; Command 2=ca
Command 3=53
9. Click “OK” to start ISP function and update the firmware into Monitor.
2.Input Value
1.Command No
3. OK
10. Firmware update is finished when the display backed to the window below.
Confidential - Do Not Copy
ViewSonic Corporation
29
VP930-2_VP930b-2
6.TROUBLE SHOOTING FLOW CHART
Trouble Shooting
Confidential - Do Not Copy
ViewSonic Corporation
30
VP930-2_VP930b-2
Confidential - Do Not Copy
ViewSonic Corporation
31
VP930-2_VP930b-2
Confidential - Do Not Copy
ViewSonic Corporation
32
VP930-2_VP930b-2
Confidential - Do Not Copy
ViewSonic Corporation
33
VP930-2_VP930b-2
Confidential - Do Not Copy
ViewSonic Corporation
34
VP930-2_VP930b-2
7. Recommended Spare Parts List
RECOMMENDED SPARE PARTS LIST (VP930-2U)
ViewSonic Model Number: VS10725
Rev: 1A
Serial No. Prefix:Q8G
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Description
Accessories:
AC POWER CORD QACC-1126D8D
SAMPO
Board Assembly: INVERTER BOARD RUNTP5655T8 (INVERTER) SAMPO
POWER BOARD
RUNTP5654T8 (POWER/B) SAMPO
MAINE BOARD
DPWBN5718T8V (MAIN/B) SAMPO
KEY BOARD
DPWBN5722T8 (KEY/B) SAMPO
I/O CABLE
D15/D15 20276(5.8) 1.83M BLACK
Cables:
I/O CABLE (DVI) QCODS1641D8D-A 1.8M BLK SAMPO
FFC CABLE
QCOPD1229T8
SAMPO
CD-OWNER GUIDE VP930 QSG TINSE3194T8
Documentation
CD-Wizard (CD-ROM
VP930 CD DDSKC0058T8
CD-OWNER GUIDE VP930 CD-DRIVER DDSKC00628T8
Electronic
LCD PANEL
M190EN03-V2
AUO
Components:
VP930-2 VS10725 TCO03
Packing Material: CARTON BOX
POLYFOAM
SPAKA6617T8F VP930B
Plastics:
STAND
GSTN-27957T8K----BLK
CAB-A
GCABA2369T8F---- PS-7604B
Cabinets:
CAB-B
GCABB1883T8F---- BLK
BACK COVER
GC0VD2626T8F---- BLK
ECR/ECN
ViewSonic P/N
A-00005316
B-00005310
B-00005311
B-00005312
B-00005313
CB-00005317
CB-00005318
CB-00005319
DC-00005307
DC-00005308
DC-00005309
Ref. P/N
2427190002P
2200501200P
2200501400P
2200501600P
2200501700P
2427501196P
2427590004P
2420390001P
2002370009P
2438570006P
2438570007P
Location
P951
U901
U801
U101
U701
P961
P971
P980
6P82
6P80
6P81
E-00005320
P-00005321
P-00005322
PL-00005315
C-00005327
C-00005328
C-00005326
2212090100P
2011091102P
2012186700P
2028262002P
2024272902P
2022267502P
2022267402P
V901
6P01
6P20
5B01
1F01
2C01
2C02
Universal number#
Q'ty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Remark 1: Above listed items are examples, supplier can expand the rows to add more necessary items.
Remark 2: All revised RSPLs with newly added items or any change made should be highlighted and correlated with the ECN/ECR approved by ViewSonic
Corporation. This is to eliminate repeated cross checks of each item between this version and prior versions.
RECOMMENDED SPARE PARTS LIST (VP930b-2)
ViewSonic Model Number: VS10725
Rev: 1A
Serial No. Prefix:Q8H
Item
Description
1 Accessories:
AC POWER CORD QACC-1126D8D
SAMPO
2 Board Assembly: INVERTER BOARD RUNTP5655T8 (INVERTER) SAMPO
3
POWER BOARD (SMD)
RUNTP5654T8 (POWER/B) SAMPO
4
MAIN BOARD
DPWBN5718T8V (MAIN/B) SAMPO
5
KEY BOARD
DPWBN5722T8 (KEY/B) SAMPO
6 Cabinets:
CAB-A
GCABA2369T8F VP930B
ECR/ECN
ViewSonic P/N
A-00005316
B-00005310
B-00005311
B-00005312
B-00005313
Ref. P/N
2427190002P
2200501200P
2200501400P
2200501600P
2200501700P
Location
P951
U901
U801
U101
U701
Universal number#
Q'ty
1
1
1
1
1
C-00005324
2603307945
BACK COVER
GC0VD2626T8F VP930B
C-00005331
2022267401P
2C02
1
CAB-B
GCABB1883T8F VP930B
C-00005329
2022267501P
2C01
1
I/O CABLE
D15/D15 20276(5.8) 1.83M BLACK
CB-00005317
2427501196P
P961
1
8
I/O CABLE (DVI)
QCODS1641D8D-A 1.8M BLK SAMPO
CB-00005318
2427590004P
P971
1
9
FLAT CABLE (FFC) QCOPD1229T8
CB-00005319
2420390001P
P980
1
DC-00005307
DC-00005308
DC-00005309
2002370009P
2438570006P
2438570007P
6P82
6P80
6P81
1
1
1
E-00005320
P-00005322
P-00005325
PL-00005323
2212090100P
2012186700P
2011091101P
2028262001P
V901
6P20
6P01
5B01
1
1
1
1
7
10
11
12
13
14
15
16
Cables:
Documentation:
SAMPO
Quick Start Guide CDVP930 QSG TINSE3194T8
CD-Owner (CD-Rom)VP930 CD DDSKC0058T8
CD-OWNER GUIDE VP930 CD-DRIVER DDSKC00628T8
Electronic
LCD PANEL
Components:
Packing Material: PACKING FOAM
BOX CARTON
STAND
Plastics:
M190EN03-V2
AUO
SPAKA6617T8F VP930B
VP930b BOX SPAKC3715T8
GSTN-2957T8 VP930B
1
Remark 1: Above listed items are examples, supplier can expand the rows to add more necessary items.
Remark 2: All revised RSPLs with newly added items or any change made should be highlighted and correlated with the ECN/ECR approved by ViewSonic
Corporation. This is to eliminate repeated cross checks of each item between this version and prior versions.
Confidential - Do Not Copy
ViewSonic Corporation
35
VP930-2_VP930b-2
BOM LIST (VP930-2)
ViewSonic Model Number: VS10725
Rev: 1a
Serial No. Prefix: Q8G
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
ViewSonic P/N
C-00005327
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
C-00005329
C-00005331
#N/A
#N/A
#N/A
#N/A
PL-00005323
#N/A
P-00005321
#N/A
#N/A
#N/A
#N/A
M-LB-0813-0856
#N/A
#N/A
P-00005322
#N/A
#N/A
M-LB-0813-0002
M-LB-0813-0528
#N/A
#N/A
DC-00005309
DC-00005307
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
M-MS-0808-6571
#N/A
#N/A
#N/A
CB-00005317
CB-00005318
CB-00005319
#N/A
#N/A
B-00005312
B-00005313
B-00005311
#N/A
#N/A
B-00005310
E-00005320
Ref. P/N
2024272902P
2053756001P
2044269101P
2051354900P
2071881100P
2061456100P
2061456200P
2071979700P
2071881300P
2080006400P
2080006300P
2061456300P
2080006600P
2061456400P
2061456500P
2072461300P
2022267501P
2022267401P
2080006200P
2071881200P
2080006500P
2080006800P
2028262001P
2080006100P
2011091102P
2055670026P
2055613281P
2055613441P
2055690023P
2055613379P
2055690014P
2055690015P
2012186700P
2063302400P
2055170060P
2056603050P
2055103400P
2013054030P
2438570011P
2438570007P
2002370009P
2013054031P
2433312131P
2433301010P
2434425070P
2434425040P
2434450160P
2433303010P
2434416030P
2427490001P
2427190003P
2427501196P
2427590004P
2420390001P
2427490002P
2427490003P
2200501600P
2200501700P
2200501400P
2200501500P
2200501300P
2200501200P
2212090100P
Description
FRONT BEZELGCABA2369T8F---- PS-7604B
LED INDIC.-PWRHDECP2012TSF VP930
FUNCTION KEY JKNBP2392T8F VP930B
NAME PLATE HBDGE1393T8 VP930B
BRACKET,FIXLANGF2194T8---A VP930
BUSHING PCUSG1647T8 VP930B
BUSHING PCUSG1674T8 VP930B
METAL FITTGLANGF2227T8 VP930B
BRACKET,FIXLANGF2232T8 VP930B
SCREW,SPE XBBSN30P04000- (M3*4) VP930B
SCREW,SPE LBOSM1069DB VP930B
BUSHING PCUSG1687T8 VP930B
SCREW,SPE XHISE40P08TV0-- (M4*8) VP930B
BUSHING PCUSG1651T8--BUSHING PISLS1177d8---INSULATOR PISLV0262T8---CABI BACK GCABB1883T8F VP930B
CABI BACK GC0VD2626T8F VP930B
SCREW,SPE XBMSB30P06000 VP930B
BRACKET,FIXLANGF206-3D8---B VP930B
SCREW,SPE XBMSB30P05000-- (M3*5) VP930B
SCREW,SPE SCREW, FOR BASE MENTAL
STANDGSTN-2957T8 VP930B
SCREW,SPE XBPSB40P10JS0 (M4*10) VP930B
CARTON BOX VP930-2 VS10725 TCO03
LABELVP930-2 VS10725 (E) AUO
LABELVIEWSONIC NO.2 STICKER
LABELVIEWSONIC 8ms STICKER 89X58mm
LABELVP930-2 VS10725 SMALL LABEL
LABELVIEWSONIC CONTAINER LABEL
LABELVP930 H1-POT TLAB-5657T8
LABELVP930 HIGHVOLTAGE TLABZ4916T8
POLYFOAMSPAKA6617T8F VP930B
PROTECTOR PISL-1351T8 VP930B
LABELVP930-2 VS10725 TCO03
SERIAL LABEL VIEWSONIC LCD SERIAL LABEL
LABELJK0936F WEN
POLYETHY BAG VP930 LCD BAG SSAKH1356D8-T-B
CD-OWNER GUIDEVP930-2 SERIES VS10725 AUO
CD-OWNER GUIDEVP930 CD-DRIVER DDSKC00628T8
GUARANT CARD VP930 QSG TINSE3194T8
POLYETHY BAG VP930 UG BAG SSAKD0010-1-T
SHIELDING FOAMW12*H3*L13mm
SHIELDING FOAMW10*H8*L10mm
AL SHIELDING TAPEW25*L70mm (AL)
AL SHIELDING TAPEW25*L40mm (AL)
AL SHIELDING TAPEW50*L160mm (AL)
SHIELDING FOAMW10*H10.5*L10mm
AL SHIELDING TAPEW16*L30mm (AL)
WIRE HARNESS QCOPD1230T8 (KEY) SAMPO
AC POWER CORD QACC-1228T8D-F SAMPO
I/O CABLE D15/D15 20276(5.8) 1.83M BLACK
I/O CABLE (DVI) QCODS1641D8D-A 1.8M BLK SAMPO
FFC CABLE QCOPD1229T8 SAMPO
WIRE HARNESS QCNWS0907T8021 (POWER)SAMPO
WIRE HARNESS QCNWS0906T8038 INVERTER SAMPO
PC BOARD ASS'YDPWBN5718T8V (MAIN/B)SAMPO
PC BOARD ASS'Y SMD DPWBN5722T8 (KEY/B) SAMPO
PC BOARD ASS'Y SMD RUNTP5654T8 (POWER/B)SAMPO
PC BOARD ASS'Y SMD RUNTP5656T8 (POWER/B)SAMPO
PC BOARD ASS'Y SMD RUNTP5663T8 (INVERTER) SAMPO
PC BOARD ASS'Y SMD RUNTP5655T8 (INVERTER) SAMPO
LCD PANEL M190EN03-V2 AUO
Location
1F01
1F02
1F03
1F04
1F10
1F11
1F12
1F16
1F17
1F18
1F22
1F23
1F24
1F25
1F26
1F27
2C01
2C02
2C03
2C04
2C05
2C06
5B01
5B02
6P01
6P02
6P03
6P04
6P05
6P11
6P13
6P14
6P20
6P23
6P50
6P51
6P52
6P60
6P80
6P81
6P82
6P83
K901
K902
K903 K904 K905 K906
K907 K908
K915
K916 K917 K918
K919
P701
P951
P961
P971
P980
P981
P982
U101
U701
U801RA
U801RB
U901RA
U901RB
V901
Universal number#
Confidential - Do Not Copy
ViewSonic Corporation
36
Q'ty
1
1
1
1
4
2
1
1
2
4
6
3
1
1
1
1
1
1
4
1
11
4
1
4
1
1
1
2
1
0.028"
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
2
1
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
VP930-2_VP930b-2
BOM LIST (VP930b-2)
ViewSonic Model Number: VS10725
Rev: 1a
Serial No. Prefix: Q8H
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
ViewSonic P/N
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
C-00005329
C-00005331
#N/A
#N/A
#N/A
#N/A
PL-00005323
#N/A
P-00005325
#N/A
#N/A
#N/A
DC-00001586
M-LB-0813-0856
#N/A
#N/A
P-00005322
#N/A
#N/A
#N/A
#N/A
DC-00005308
DC-00005309
DC-00005307
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
M-MS-0808-6571
#N/A
#N/A
A-00005316
CB-00005317
CB-00005318
CB-00005319
#N/A
#N/A
B-00005312
B-00005313
B-00005311
#N/A
#N/A
B-00005310
E-00005320
Ref. P/N
2024272901P
2053756001P
2044269101P
2051354900P
2071881100P
2061456100P
2061456200P
2071979700P
2071881300P
2080006400P
2080006300P
2061456300P
2080006600P
2061456400P
2061456500P
2072461300P
2022267501P
2022267401P
2080006200P
2071881200P
2080006500P
2080006800P
2028262001P
2080006100P
2011091101P
2055670015P
2055613441P
2055670016P
2055613435P
2055613379P
2055690014P
2055690015P
2012186700P
2063302400P
2055170034P
2056670001P
2013054030P
2438570006P
2438570007P
2002370009P
2013054031P
2001970003P
2433312131P
2433301010P
2434425070P
2434425040P
2434450160P
2433303010P
2434416030P
2427490001P
2427190002P
2427501196P
2427590004P
2420390001P
2427490002P
2427490003P
2200501600P
2200501700P
2200501400P
2200501500P
2200501300P
2200501200P
2212090100P
Description
FRONT BEZEL GCABA2369T8F VP930B
LED INDIC.-PWR HDECP2012TSF VP930
FUNCTION KEY JKNBP2392T8F VP930B
NAME PLATE HBDGE1393T8 VP930B
BRACKET,FIX LANGF2194T8---A VP930
BUSHING PCUSG1647T8 VP930B
BUSHING PCUSG1674T8 VP930B
METAL FITTG LANGF2227T8 VP930B
BRACKET,FIX LANGF2232T8 VP930B
SCREW,SPE XBBSN30P04000- (M3*4) VP930B
SCREW,SPE LBOSM1069DB VP930B
BUSHING PCUSG1687T8 VP930B
SCREW,SPE XHISE40P08TV0-- (M4*8) VP930B
BUSHING PCUSG1651T8--BUSHING PISLS1177d8---INSULATOR PISLV0262T8---CABI BACK GCABB1883T8F VP930B
CABI BACK GC0VD2626T8F VP930B
SCREW,SPE XBMSB30P06000 VP930B
BRACKET,FIX LANGF206-3D8---B VP930B
SCREW,SPE XBMSB30P05000-- (M3*5) VP930B
SCREW,SPE SCREW, FOR BASE MENTAL
STAND GSTN-2957T8 VP930B
SCREW,SPE XBPSB40P10JS0 (M4*10) VP930B
CARTON BOX VP930b BOX SPAKC3715T8
LABEL VP930b UPC LABEL TLABZ3903D8
LABEL VIEWSONIC 8ms STICKER 89X58mm
LABEL VP930b SMALL LABEL TLAB-5532D8
LABEL VIEWSONIC INSET PAGE-1280X1024
LABEL VIEWSONIC CONTAINER LABEL
LABEL VP930 H1-POT TLAB-5657T8
LABEL VP930 HIGHVOLTAGE TLABZ4916T8
POLYFOAM SPAKA6617T8F VP930B
PROTECTOR PISL-1351T8 VP930B
LABEL VP930b SET LABEL TLABM4485T8
SERIAL LABEL VP930 SN LABEL TLAB-5523D8
POLYETHY BAG VP930 LCD BAG SSAKH1356D8-T-B
CD-OWNER GUIDE VP930 CD DDSKC0058T8
CD-OWNER GUIDE VP930 CD-DRIVER DDSKC00628T8
GUARANT CARD VP930 QSG TINSE3194T8
POLYETHY BAG VP930 UG BAG SSAKD0010-1-T
ATTACH SHEET VP930 CD CORRECT PAGE
SHIELDING FOAM W12*H3*L13mm
SHIELDING FOAM W10*H8*L10mm
AL SHIELDING TAPE W25*L70mm (AL)
AL SHIELDING TAPE W25*L40mm (AL)
AL SHIELDING TAPE W50*L160mm (AL)
SHIELDING FOAM W10*H10.5*L10mm
AL SHIELDING TAPE W16*L30mm (AL)
WIRE HARNESS QCOPD1230T8 (KEY) SAMPO
AC POWER CORD QACC-1126D8D SAMPO
I/O CABLE D15/D15 20276(5.8) 1.83M BLACK
I/O CABLE (DVI) QCODS1641D8D-A 1.8M BLK SAMPO
FFC CABLE QCOPD1229T8 SAMPO
WIRE HARNESS QCNWS0907T8021 (POWER) SAMPO
WIRE HARNESS QCNWS0906T8038 INVERTER SAMPO
PC BOARD ASS'Y DPWBN5718T8V (MAIN/B) SAMPO
PC BOARD ASS'Y SMD DPWBN5722T8 (KEY/B) SAMPO
PC BOARD ASS'Y SMD RUNTP5654T8 (POWER/B) SAMPO
PC BOARD ASS'Y SMD RUNTP5656T8 (POWER/B) SAMPO
PC BOARD ASS'Y SMD RUNTP5663T8 (INVERTER) SAMPO
PC BOARD ASS'Y SMD RUNTP5655T8 (INVERTER) SAMPO
LCD PANEL M190EN03-V2 AUO
Location
1F01
1F02
1F03
1F04
1F10
1F11
1F12
1F16
1F17
1F18
1F22
1F23
1F24
1F25
1F26
1F27
2C01
2C02
2C03
2C04
2C05
2C06
5B01
5B02
6P01
6P02
6P04
6P05
6P06
6P11
6P13
6P14
6P20
6P23
6P50
6P51
6P60
6P80
6P81
6P82
6P83
6P84
K901
K902
K903 K904 K905 K906
K907 K908
K915
K916 K917 K918
K919
P701
P951
P961
P971
P980
P981
P982
U101
U701
U801 RA
U801 RB
U901 RA
U901 RB
V901
Universal number#
Confidential - Do Not Copy
ViewSonic Corporation
37
Q'ty
1
1
1
1
4
2
1
1
2
4
6
3
1
1
1
1
1
1
4
1
11
4
1
4
1
1
2
1
1
0.028
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
2
1
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
VP930-2_VP930b-2
8.Exploded Diagram And Spare Parts List
ViewSonic Corporation
Model
Title
39/56
ViewSonic Corporation
38
Confidential - Do Not Copy
VP930-2_VP930b-2
Date
Rev:
EXPLODED PARTS LIST (VP930-2)
ViewSonic Model Number: VS10725-2E
Rev: 1a
Serial No. Prefix: Q8G
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
ViewSonic P/N
C-00004132
PL-00004130
PL-00004124
B-00004103
PL-00004125
E-00000927
HW-00004137
HW-00004121
N/A
B-00005001
C-00004133
N/A
M-00003927
C-00004126
N/A
B-00004101
N/A
B-00004102
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Ref. P/N
GCABA2369T8F--JKNBP2392T8F--HDECP2012T8F--DPWBN5722T8---HBDGE1393T8---VVLM190EN02V2-LANGF2232T8---LANGF2227T8---PCUSG1687T8---RUNTP5654T8---GCABB1883T8F--LANGF2194T8---A
PCUSG1671T8---GCOVD2626T8F--PCUSG1674T8---DPWBN5718T8V--PCUSG1651T8---RUNTP5663T8---PISLV0262T8---PCUSG1395D8---PCUS-1443T8---A
PCUSS1588T8---GCOVD2632T8F--GCOVD2633T8F--MHNGM0067T8---GCOVD2630T8F--GCOVD2631T8F--GCOVD2634T8F--GSTN-2950T8F--LANGF2229T8----
Description
CAB-A
KNOB
LENS
KEY BOARD
LOGO PLATE
19” AUO PANEL
METAL FOR PANEL
METAL BRACKET
RUBBER
POWER BOARD
CAB-B
VESA-FIX
RUBBER
BACK COVER
RUBBER
I/F BOARD
BUBBER
INVERTER BOARD
DECORATION MYLAR
SPONGE
VESA METAL USE
SPONGE
HINGE COVER
HINGE COVER
HINGE BODAY
NECK FRONT
NECK BACK
CABLE FIED
19” BASE
19” BASE-METAL
Q'ty
1
1
1
1
1
1
2
1
1
1
1
4
1
1
1
1
1
1
1
3
1
1
1
1
1
1
1
3
1
1
Confidential - Do Not Copy
ViewSonic Corporation
39
VP930-2_VP930b-2
EXPLODED PARTS LIST (VP930b-2)
ViewSonic Model Number: VS10725-2W
Rev: 1A
Serial No. Prefix: Q8Q
Item ViewSonic P/N
1
C-00004139
Ref. P/N
Description
GCABA2369T8F--B
CAB-A
Q'ty
1
2
PL-00004123
JKNBP2392T8F--B
KNOB
1
3
PL-00004124
HDECP2012T8F---
LENS
1
4
B-00004103
DPWBN5722T8----
KEY BOARD
1
5
PL-00004125
HBDGE1393T8----
LOGO PLATE
1
6
E-00000927
VVLM190EN02V2--
19” AUO PANEL
1
7
HW-00004137
LANGF2232T8----
METAL FOR PANEL
2
8
HW-00004121
LANGF2227T8----
METAL BRACKET
1
9
N/A
PCUSG1687T8----
RUBBER
1
10
B-00005001
RUNTP5654T8----
POWER BOARD
1
11
C-00004140
GCABB1883T8F--B
CAB-B
1
12
N/A
LANGF2194T8---A
VESA-FIX
4
13
M-00003927
PCUSG1671T8----
RUBBER
1
14
C-00004104
GCOVD2626T8F--B
BACK COVER
1
15
N/A
PCUSG1674T8----
RUBBER
1
16
B-00004101
DPWBN5718T8V---
I/F BOARD
1
17
N/A
PCUSG1651T8----
BUBBER
1
18
B-00004102
RUNTP5663T8----
INVERTER BOARD
1
19
N/A
PISLV0262T8----
DECORATION MYLAR
1
20
N/A
PCUSG1395D8----
SPONGE
3
21
N/A
PCUS-1443T8---A
VESA METAL USE
1
22
N/A
PCUSS1588T8----
SPONGE
1
23
N/A
GCOVD2632T8F--B
HINGE COVER
1
24
N/A
GCOVD2633T8F--B
HINGE COVER
1
25
N/A
MHNGM0067T8----
HINGE BODAY
1
26
N/A
GCOVD2630T8F--B
NECK FRONT
1
27
N/A
GCOVD2631T8F--B
NECK BACK
1
28
N/A
GCOVD2634T8F---
CABLE FIED
3
29
N/A
GSTN-2950T8F--B
19” BASE
1
30
N/A
LANGF2229T8----
19” BASE-METAL
1
Confidential - Do Not Copy
VP930-2_VP930b-2
ViewSonic Corporation
40
40/56
Confidential - Do Not Copy
ViewSonic Corporation
41
VP930-2_VP930b-2
Packing For Shipping
1. Parking Procedure
1.1 Paste protecting film to protect the monitor. (Figure 1)
1.2 Put the montor in the PE bag and seal the bag with tape. (Figure 2)
Figure 1
Figure 2
1.3 Put the cushions on the monitor. (Figure 3)
1.4 Place the monitor into the carton and then put all the accessories into the carton. At last,
The carton and seal it with tape. (Figure 4)
Figure 3
Figure 4
Confidential - Do Not Copy
ViewSonic Corporation
42
VP930-2_VP930b-2
Disassembly
Lie down the monitor on flat table
Remove Back cover and Stand by 4 screw
Remove CAB-B: Take out 4 screw
Take off D-sub 6 screws
Confidential - Do Not Copy
ViewSonic Corporation
43
VP930-2_VP930b-2
Remove the power board by 3 screws
Remove the Inverter board by 2 screws
Remove the I/F board by 2 screws
Confidential - Do Not Copy
ViewSonic Corporation
44
VP930-2_VP930b-2
9. Block Diagram
Confidential - Do Not Copy
ViewSonic Corporation
45
VP930-2_VP930b-2
10.Schematic Diagram
ViewSonic Corporation
46
Confidential - Do Not Copy
VP930-2_VP930b-2
ViewSonic Corporation
47
Confidential - Do Not Copy
VP930-2_VP930b-2
ViewSonic Corporation
48
Confidential - Do Not Copy
VP930-2_VP930b-2
ViewSonic Corporation
49
Confidential - Do Not Copy
VP930-2_VP930b-2
ViewSonic Corporation
50
Confidential - Do Not Copy
VP930-2_VP930b-2
ViewSonic Corporation
51
Confidential - Do Not Copy
VP930-2_VP930b-2
11. PCB Layout Diagrams
IF-board
Confidential - Do Not Copy
ViewSonic Corporation
52
VP930-2_VP930b-2
Confidential - Do Not Copy
ViewSonic Corporation
53
VP930-2_VP930b-2
Confidential - Do Not Copy
ViewSonic Corporation
54
VP930-2_VP930b-2
Key board
Confidential - Do Not Copy
ViewSonic Corporation
55
VP930-2_VP930b-2
Confidential - Do Not Copy
ViewSonic Corporation
56
VP930-2_VP930b-2
* Reader’s Response*
Dear Readers:
Thank you in advance for your feedback on our Service Manual, which allows continuous improvement
of our products. We would appreciate your completion of the Assessment Matrix below, for return to
ViewSonic Corporation.
Assessment
A. What do you think about the content of this Service Manual?
Unit
Excellent
Good
Fair
Bad
1. Precautions and Safety Notices
2. Specification
3. Front Panel Function Control Description
4. Circuit Description
5. Adjustment Procedure
6. Troubleshooting Flow Chart
7. Recommended Spare Parts List
8. Exploded Diagram and Exploded Parts List
9. Block Diagrams
10. Schematic Diagrams
11.PCB Layout Diagrams
B.
Are you satisfied with this Service Manual?
Item
Excellent
Good
Fair
Bad
1. Service Manual Content
2. Service Manual Layout
3. The form and listing
C. Do you have any other opinions or suggestions regarding this service manual?
Reader’s basic dada:
Name:
Title:
Company:
Add:
Tel:
Fax:
E-mail:
After completing this form, please return it to ViewSonic Quality Assurance in the USA at facsimile
1-909-839-7943. You may also e-mail any suggestions to the Director, Quality Systems & Processes
(marc.maupin@viewsonic.com)
Confidential - Do Not Copy
ViewSonic Corporation
57
VP930-2_VP930b-2
Download PDF